Hadrian ======= Hadrian is the build system for the [Glasgow Haskell Compiler][ghc]. It is based on the [Shake][shake] library. If you are curious about the rationale behind the project and the architecture of the build system you can find more details in this [Haskell Symposium 2016 paper](https://dl.acm.org/authorize?N41275) and this [Haskell eXchange 2016 talk][talk]. Your first build ---------------- Put on the helmet and run the following commands from the root of the GHC tree: ``` ./boot && ./configure hadrian/build -j ``` or on Windows: ``` ./boot && ./configure --enable-tarballs-autodownload hadrian/build.bat -j ``` Here flag `-j` enables parallelism and is optional. We will further refer to the build script simply as `build`. * On Windows, if you do not want to install MSYS, you can use the Stack-based build script (Stack provides a managed MSYS environment), as described in [these instructions][windows-build]. If you don't mind installing MSYS yourself or already have it, you can use the Cabal-based build script. * Hadrian is written in Haskell and depends on `shake` (plus a few packages that `shake` depends on), `mtl`, `quickcheck`, and GHC core libraries. * If you have never built GHC before, start with the [preparation guide][ghc-preparation]. * By default Hadrian will fetch dependencies from the internet. If this is a problem for your build system then see the [bootstrap](bootstrap/README.md) directory for instructions about how to build hadrian without an internet connection. Using the build system ---------------------- Once your first build is successful, simply run `build` to rebuild after some changes. Build results are placed into `_build` by default. #### Choosing a build flavour There are many different ways to build a compiler, each way is called a flavour. * `--flavour=FLAVOUR`: choose a build flavour. The following settings are currently supported: `default`, `quick`, `quickest`, `perf`, `prof`, `devel1` and `devel2`. As an example, the `quickest` flavour adds `-O0` flag to all GHC invocations and builds libraries only in the `vanilla` way, which speeds up builds by 3-4x. In addition to the overall build flavour there are also "flavour transformers" which can slightly modify the build settings for a flavour. Some common flavour transformers are: * `no_profiled_libs`: Don't build profiled libraries * `lint`: Build with core lint enabled. * etc A flavour transformer is appended to a normal flavour name using `+` ``` --flavour=default+lint ``` Build flavours and flavour transformers are documented [here](https://gitlab.haskell.org/ghc/ghc/blob/master/hadrian/doc/flavours.md). #### Command line flags In addition to standard Shake flags (try `--help`), the build system currently supports several others: * `--build-root=PATH` or `-oPATH`: specify the directory in which you want to store all build products. By default Hadrian builds everything in the `_build/` subdirectory of the GHC source tree. This option is useful for GHC developers who want to build GHC in different ways or at different commits, from the same source directory, and have the build products sit in different, isolated folders. * `--freeze1`: freeze Stage1 GHC, i.e. do not rebuild it even if some of its source files are out-of-date. This allows to significantly reduce the rebuild time when you are working on a feature that affects both Stage1 and Stage2 compilers, but may lead to incorrect build results. To unfreeze Stage1 GHC simply drop the `--freeze1` flag and Hadrian will rebuild all out-of-date files. * `--freeze2`: just like `--freeze1` but tell Hadrian to additionally freeze Stage2 GHC. * `--skip-depends`: skips rebuilding Haskell module dependency files. * `--bignum={native,gmp,check-gmp,ffi}`: choose which bignum implementation to use. The default is `gmp`. * `--color` and `--no-color`: choose whether to use colors when printing build progress info. By default, Hadrian tries to determine if the terminal supports colored output, and proceeds accordingly. * `--progress-info=STYLE`: choose how build progress info is printed. There are four settings: `none`, `brief` (one line per build command; this is the default setting), `normal` (typically a box per build command), and `unicorn` (when `normal` just won't do). * `-V`/`--verbose`: run Hadrian in verbose mode. This makes commands print their stdout and produces slightly more output on a failure (including hadrian call stacks). * `-VV`: run hadrian in diagnostics mode: In particular this prints diagnostic messages by Shake oracles and full command lines for all commands. * `--lint`: run [Shake Lint](https://shakebuild.com/manual#lint) during the build to check that the build system is well formed. Note that the Lint check currently fails under certain circumstances, as discussed in [this ticket](https://gitlab.haskell.org/ghc/ghc/issues/15971). #### Expressions Hadrian expressions are used extensively for specifying build settings. For an explanation of how they work, see the [documentation](doc/expressions.md). #### User settings The Make-based build system uses `mk/build.mk` to specify user build settings. Hadrian uses `hadrian/UserSettings.hs` for the same purpose, see [documentation](doc/user-settings.md). #### Building libraries and executables You can build a specific library or executable for a given stage by running `build stage::`. Examples: ```sh # Build the Stage1 GHC compiler, and place the binary to the directory # _build/stage0/bin/ghc (because it is built by the Stage0 compiler). build stage1:exe:ghc-bin # Build the Stage2 GHC compiler, and place the binary to the directory # _build/stage1/bin/ghc (because it is built by the Stage1 compiler). build stage2:exe:ghc-bin # Build the `ghc` library with the bootstrapping (Stage0) compiler, and register # it in the package database stored in the directory _build/stage0/lib. build stage0:lib:ghc # Build the Cabal library with the Stage1 compiler and register it # in the package database stored in the directory _build/stage1/lib. # Build the `text` library with the Stage2 compiler and register it # in the package database stored in the directory _build/stage2/lib. build stage2:lib:text # Build Haddock using the Stage1 compiler and place the binary into the # directory _build/stage1/haddock. build stage1:exe:haddock ``` #### Fast feedback using ghci Running the `./hadrian/ghci` script will load the main compiler into a ghci session. This is intended for fast development feedback, modules are only typechecked so it isn't possible to run any functions in the repl. ``` ./hadrian/ghci ``` You can also use this target with `ghcid`. ``` ghcid --command="./hadrian/ghci" ``` The first time this command is run hadrian will need to compile a few dependencies which will take 1-2 minutes. Loading GHC into GHCi itself takes about 30 seconds and reloads after that take in the region of 1-5 seconds depending on which modules need to be recompiled. You can further speed up the script by passing `-j` as an argument. This will have the effect of passing `-j` to both hadrian and ghci so they will both build in parallel. ``` ./hadrian/ghci -j8 ``` ##### Multi-Repl Session You can also use the experimental multi-repl if you are booting with GHC-9.4 or later. ``` ./hadrian/ghci-multi ``` #### Testing To run GHC testsuite, use `build test`. See [doc/testsuite.md](doc/testsuite.md) to learn about all associated command line flags, as well as about the equivalents of the features that the Make build system offers. NOTE: The only build flavours which are expected to pass the testsuite are those tested in CI. If you use an untested flavour such as "Quick" then you run the risk that not all tests will pass. In particular you can rely on the `validate` and `perf` flavours being tested but no others. `build selftest` runs tests of the build system. The current test coverage is close to zero (see [#197][test-issue]). #### Running linters There are two targets which runs the lint commands used by CI: * `lint:base`, runs hlint on the `base` library. * `lint:compiler`, runs hlint on the `ghc` library. It's useful to know that you can combine multiple targets in build command. For example, you can tell hadrian to build the compiler and also run the linters: ``` ./hadrian/build stage2:exe:ghc-bin lint:compiler ``` #### Clean and full rebuild * `build clean` removes all build artefacts. * `build distclean` additionally remove the mingw tarballs and fs* files created by `configure`. * `build -B` forces Shake to rerun all rules, even if the previous build results are still up-to-date. #### Staged compilation GHC is a self-hosted compiler and consequently the build proceeds in several stages: 1. The build begins with a user-provided installation of GHC called the stage0 (or bootstrap) compiler which is used (via the `build.*.sh` scripts) to build Hadrian. 1. Hadrian uses the stage0 compiler to build a stage1 compiler (somewhat confusingly found in `_build/stage0/bin/ghc`), linking against the stage0 compiler's core libraries (e.g. `base`). 1. The stage1 compiler is used to build new core libraries (found in `_build/stage1/lib`). 1. The stage1 compiler is used to build a stage2 compiler (found in `_build/stage1/bin/ghc`), linking against these new core libraries. 1. Optionally (see the [Building Stage3](#building-stage3) section below) the stage2 compiler can be used to build a stage3 compiler (found in `build/stage2/bin/ghc`) as a further smoke-test. Note that the stage directories in the `_build` directory can be thought of as named after the stage that was used to *build* the artifacts in each directory. These stages can be summarized graphically: ![an overview of the stages of a Hadrian compilation](doc/staged-compilation.svg) #### Documentation To build all GHC documentation, run `build docs`. This includes * Haddock documentation for all libraries * The user guide (PDF and HTML) * The man page In order to only build haddock document there is the `build docs-haddock` target. In order to build the haddock documentation for just one package use the `docs:` command, for example `docs:base` will just build the documentation for `base`. Alternatively, you can use the `--docs` CLI flag to selectively disable some or all of the documentation targets: - `--docs=none`: don't build any docs - `--docs=no-haddocks`: don't build haddocks - `--docs=no-sphinx`: don't build any user manual or manpage - `--docs=no-sphinx-html`: don't build HTML versions of manuals - `--docs=no-sphinx-pdfs`: don't build PDF versions of manuals - `--docs=no-sphinx-man`: don't build the manpage You can pass several `--docs=...` flags, Hadrian will combine their effects. To build haddock documentation for upload to hackage you need to pass the `--haddock-base-url` flag, by default this will choose a url suitable for uploading to hackage but you might also want to pass something like `http://127.0.0.1:8080/package/%pkg%/docs` for testing upload locally on a local hackage server. #### Source distribution To build a GHC source distribution tarball, run `build source-dist`. #### Binary distribution To build a GHC binary distribution, run `build binary-dist`. The resulting tarball contains just enough to support the ``` sh $ ./configure [--prefix=PATH] && make install ``` workflow, for now. ### Building and installing GHC You can get Hadrian to build _and_ install a binary distribution in one go with the following command: ``` sh $ build install --prefix=/some/absolute/path ``` This builds everything that would be shipped in a bindist, without creating the archive, and just runs `./configure --prefix=PATH` and `make install` to get GHC installed installed at `/some/absolute/path`. #### Building Stage3 It is possible to define a build flavour that builds a Stage3 compiler, which is a compiler built using Stage2. This is useful for cross-compilation. Detailed instructions can be found in the corresponding [part of the user settings manual](doc/user-settings.md#specifying-the-final-stage-to-build). #### Integrating Hadrian into other tooling The `tool-args` target is designed to allow hadrian to be integrated into other tooling which uses the GHC API. `tool-args` prints out a list of flags which hadrian will use to compile a module in the `compiler` directory. Using these flags you can then set up a GHC API session with the correct environment to load a module into your own GHC session. This is how `haskell-ide-engine` is able to support hadrian. ``` > ./hadrian/build tool-args -hide-all-packages -no-user-package-db -package-db _build/stage0/lib/packag... ``` The `./hadrian/ghci` script is implemented using this target. Troubleshooting --------------- If you need help in debugging Hadrian, read the [wiki](https://github.com/snowleopard/hadrian/wiki) and Shake's [debugging tutorial](https://shakebuild.com/debugging). If nothing helps, don't hesitate to create a GHC issue. Current limitations ------------------- The new build system still lacks many important features: * Dynamic linking on Windows is not supported [#343][dynamic-windows-issue]. Cheatsheet for Make users ------------------------- You can find a cheatsheet-style document that shows the Hadrian equivalents of commands that GHC users are used to run with the Make build system [here](doc/make.md). Acknowledgements ---------------- The list of people who helped create Hadrian is long, and we hope that it will soon become even longer! The project was first developed in a separate GitHub repository, where you can find the list of original [contributors][contributors]. They had to stare at Makefiles for months, so give them all a round of applause. Simon Peyton Jones and Simon Marlow helped with deciphering these Makefiles, and Neil Mitchell patiently explained how to translate Makefiles to (much nicer) Shakefiles. The initial development of Hadrian was funded by Newcastle University, EPSRC and Microsoft Research. Other organisations that contributed at various stages of the project are Haskell.Org and Google (both through supporting summer student projects), as well as Well-Typed. [ghc]: https://en.wikipedia.org/wiki/Glasgow_Haskell_Compiler [shake]: https://github.com/ndmitchell/shake [make]: https://gitlab.haskell.org/ghc/ghc/wikis/building/architecture [talk]: https://skillsmatter.com/skillscasts/8722-meet-hadrian-a-new-build-system-for-ghc [issues]: https://github.com/snowleopard/hadrian/issues [ghc-preparation]: https://gitlab.haskell.org/ghc/ghc/wikis/building/preparation [ghc-windows-quick-build]: https://gitlab.haskell.org/ghc/ghc/wikis/building/preparation/windows#AQuickBuild [windows-build]: https://gitlab.haskell.org/ghc/ghc/blob/master/hadrian/doc/windows.md [test-issue]: https://github.com/snowleopard/hadrian/issues/197 [dynamic-windows-issue]: https://github.com/snowleopard/hadrian/issues/343 [bin-dist-issue]: https://github.com/snowleopard/hadrian/issues/219 [contributors]: https://github.com/snowleopard/hadrian/graphs/contributors