#								 -*-makefile-*-
# @configure_input@
#
################################################################################
#
# config.mk.in
#
# This file supplies defaults for many tweakable build configuration
# options.  Some of the defaults are filled in by the autoconf-generated
# configure script.
#
# DO NOT EDIT THIS FILE!
#
# 	- config.mk is auto-generated from config.mk.in by configure.
#	  If you edit config.mk your changes will be spammed.
#
#	- Settings in this file may be overriden by giving replacement
#	  definitions in build.mk.  See build.mk.sample for a good
#	  starting point for a build.mk file.
#
#	  If you don't have a build.mk file then you get defaults for everything.
#	  The defaults should provide a reasonable vanilla build.

# TOP: the top of the fptools hierarchy, absolute path.
# On Windows this is a c:/foo/bar style path.
TOP		= @hardtop@

include $(TOP)/mk/project.mk

# By default, be verbose
V = 1

################################################################################
#
#		Global configuration options
#
################################################################################

NO_INCLUDE_DEPS = NO
NO_INCLUDE_PKGDATA = NO

################################################################################
#
# Variables that control how the compiler itself is built
#
################################################################################

# The compiler used to build GHC is $(GHC).  To change the actual compiler
# used, re-configure with --with-ghc=<path-to-ghc>.

# Extra ways in which to build the compiler (for example, you might want to
# build a profiled compiler so you can see where it spends its time)
GhcCompilerWays=

# Extra option flags to pass to the compiler that compiles the compiler
# (Ones that are essential are wired into compiler/Makefile)
# Typical options to use here:
#
#	-DDEBUG		include debugging code and assertions (will make the
#			compiler slower and produce debugging output, but useful
#			for development)
#
#	-dcore-lint	check the types after every pass of the compiler;
#			a pretty strong internal check of the compiler being
#			used to compile GHC.  Useful when bootstrapping.
GhcHcOpts=-Rghc-timing

# Extra options added to specific stages of the compiler bootstrap.
# These are placed later on the command line, and may therefore
# override options from $(GhcHcOpts).
GhcStage1HcOpts=
GhcStage2HcOpts=-O2
GhcStage3HcOpts=-O2

# These options modify whether or not a built compiler for a bootstrap
# stage defaults to using the new code generation path.  The new
# code generation path is a bit slower, so for development just
# GhcStage2DefaultNewCodegen=YES, but it's also a good idea to try
# building all libraries and the stage2 compiler with the
# new code generator, which involves GhcStage1DefaultNewCodegen=YES.
GhcStage1DefaultNewCodegen=NO
GhcStage2DefaultNewCodegen=NO
GhcStage3DefaultNewCodegen=NO

GhcDebugged=NO
GhcDynamic=NO

# GhcProfiled=YES means compile a profiled stage-2 compiler
GhcProfiled=NO

ifeq "$(findstring $(TargetOS_CPP),linux freebsd dragonfly openbsd netbsd solaris2 kfreebsdgnu haiku linux-android)" ""
TargetElf = NO
else
TargetElf = YES
endif

# Some platforms don't support shared libraries
NoSharedLibsPlatformList = \
	x86_64-unknown-mingw32 \
	i386-unknown-mingw32

ifeq "$(SOLARIS_BROKEN_SHLD)" "YES"
NoSharedLibsPlatformList += i386-unknown-solaris2
endif

PlatformSupportsSharedLibs = $(if $(filter $(TARGETPLATFORM),\
    $(NoSharedLibsPlatformList)),NO,YES)

# DYNAMIC_BY_DEFAULT says whether this compiler will default to
# building dynamic executables, i.e. -dynamic is on.  We do this for
# most platforms because it lets us use the system dynamic linker
# instead of our own linker for GHCi.
#
# Currently this isn't possible on Windows, and we have not yet enabled
# it on i386 while we consider the performance implications.
#
ifeq "$(TargetOS_CPP)" "mingw32"
DYNAMIC_BY_DEFAULT = NO
else ifeq "$(TargetArch_CPP)" "i386"
DYNAMIC_BY_DEFAULT = NO
else
DYNAMIC_BY_DEFAULT = YES
endif

# For now, we unconditionally disable dynamic-by-default, as the
# cabal-install's that are in the wild don't handle it properly.
DYNAMIC_BY_DEFAULT = NO

# If building both v and dyn ways, then use -dynamic-too to build them.
# This makes the build faster.
DYNAMIC_TOO = YES

# Use the dynamic way when building programs in the GHC tree. In
# particular, this means that GHCi will use DLLs rather than loading
# object files directly.
ifeq "$(TargetOS_CPP)" "mingw32"
# This doesn't work on Windows yet
DYNAMIC_GHC_PROGRAMS = NO
DYNAMIC_TOO=NO
else ifeq "$(PlatformSupportsSharedLibs)" "NO"
DYNAMIC_GHC_PROGRAMS = NO
else
DYNAMIC_GHC_PROGRAMS = YES
endif

# Build a compiler that will build *unregisterised* libraries and
# binaries by default.  Unregisterised code is supposed to compile and
# run without any support for architecture-specific assembly mangling,
# register assignment or tail-calls, and is therefore a good way to get
# started when porting GHC to new architectures.
#
# NOTE: the stage1 compiler will be a registerised binary (assuming
# the compiler you build with is generating registerised binaries), but
# the stage2 compiler will be an unregisterised binary.
#
GhcUnregisterised=@Unregisterised@

# Build a compiler with a native code generator backend
# (as well as a C backend)
#
# Target platforms supported:
#   i386, powerpc
#   IOS and AIX are not supported
ArchSupportsNCG=$(strip $(patsubst $(TargetArch_CPP), YES, $(findstring $(TargetArch_CPP), i386 x86_64 powerpc sparc)))
OsSupportsNCG=$(strip $(patsubst $(TargetOS_CPP), YES, $(patsubst ios,,$(patsubst aix,,$(TargetOS_CPP)))))

GhcWithNativeCodeGen := $(strip\
    $(if $(filter YESYESNO,\
		  $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))

HaveLibDL = @HaveLibDL@

# ArchSupportsSMP should be set iff there is support for that arch in
# includes/stg/SMP.h
ArchSupportsSMP=$(strip $(patsubst $(TargetArch_CPP), YES, $(findstring $(TargetArch_CPP), i386 x86_64 sparc powerpc arm aarch64)))

GhcWithSMP := $(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))

# Whether to include GHCi in the compiler.  Depends on whether the RTS linker
# has support for this OS/ARCH combination.

OsSupportsGHCi=$(strip $(patsubst $(TargetOS_CPP), YES, $(findstring $(TargetOS_CPP), mingw32 cygwin32 linux solaris2 freebsd dragonfly netbsd openbsd darwin kfreebsdgnu)))
ArchSupportsGHCi=$(strip $(patsubst $(TargetArch_CPP), YES, $(findstring $(TargetArch_CPP), i386 x86_64 powerpc sparc sparc64 arm aarch64)))

ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
GhcWithInterpreter=YES
else
GhcWithInterpreter=$(if $(findstring YES,$(DYNAMIC_GHC_PROGRAMS)),YES,NO)
endif

# GhcEnableTablesNextToCode tells us whether the target architecture
# supports placing info tables directly before the entry code
# (see TABLES_NEXT_TO_CODE in the RTS).  Whether we actually compile for
# TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
# code or not, which may be decided by options to the compiler later.
ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
GhcEnableTablesNextToCode=NO
else
GhcEnableTablesNextToCode=YES
endif

# Whether to use libffi for adjustors (foreign import "wrapper") or
# not.  If we have built-in support (rts/Adjustor.c) then we use that,
# otherwise we fall back on libffi, which is slightly slower.
ArchHasAdjustorSupport = $(if $(findstring $(TargetArch_CPP),i386 x86_64),YES,NO)
ifeq "$(ArchHasAdjustorSupport)" "YES"
UseLibFFIForAdjustors=NO
else
UseLibFFIForAdjustors=YES
endif

# On Windows we normally want to make a relocatable bindist, to we
# ignore flags like libdir
ifeq "$(Windows_Host)" "YES"
RelocatableBuild = YES
else
RelocatableBuild = NO
endif

# needs to be after $(RelocatableBuild) is set above
include $(TOP)/mk/install.mk

# When building bindists we set this to yes so that the binaries are as
# portable as possible.
BeConservative = NO

ExtraMakefileSanityChecks = NO

#------------------------------------------------------------------------------
# Options for Libraries

# Which directory (in libraries/) contains the integer library?
INTEGER_LIBRARY=integer-gmp

# We build the libraries at least the "vanilla" way (way "v")
GhcLibWays = v

# In addition to the normal sequential way, the default is to also build
# profiled prelude libraries
GhcLibWays += p

ifeq "$(PlatformSupportsSharedLibs)" "YES"
GhcLibWays += dyn
endif

# Handy way to test whether we're building shared libs or not.
BuildSharedLibs=$(strip $(if $(findstring dyn,$(GhcLibWays)),YES,NO))

# In addition, the RTS is built in some further variations.  Ways that
# make sense here:
#
#   thr         : threaded
#   thr_p       : threaded profiled
#   debug       : debugging (compile with -g for the C compiler, and -DDEBUG)
#   debug_p     : debugging profiled
#   thr_debug   : debugging threaded
#   thr_debug_p : debugging threaded profiled
#   l           : event logging
#   thr_l       : threaded and event logging
#
GhcRTSWays=l

# Usually want the debug version
GhcRTSWays += debug

# We always have the threaded versions, but note that SMP support may be disabled
# (see GhcWithSMP).
GhcRTSWays += thr thr_debug thr_l
GhcRTSWays += $(if $(findstring p, $(GhcLibWays)),thr_p,)
GhcRTSWays += $(if $(findstring dyn, $(GhcLibWays)),dyn debug_dyn thr_dyn thr_debug_dyn l_dyn thr_l_dyn,)

# We can only build GHCi threaded if we have a threaded RTS:
GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)

# Option flags to pass to GHC when it's compiling modules in
# fptools/libraries.  Typically these are things like -O or
# -dcore-lint or -H32m.  The ones that are *essential* are wired into
# the build system.
#
# 	-O(2) is pretty desirable, otherwise no inlining of prelude
#		things (incl "+") happens when compiling with this compiler

GhcLibHcOpts=-O2

# Strip local symbols from libraries?  This can make the libraries smaller,
# but makes debugging somewhat more difficult.  Doesn't work with all ld's.
#
StripLibraries=NO

# ----------------------------------------------------------------------------
# Object-file splitting
#
# 	Set SplitObjs=YES or NO in your build.mk
#
#	Don't use -split-objs in in GhcLibHcOpts, because the build
#		system needs to do other special magic if you are
#		doing object-file splitting

ArchSupportsSplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),YES,NO))
OsSupportsSplitObjs=$(strip $(if $(filter $(TargetOS_CPP),mingw32 cygwin32 linux darwin solaris2 freebsd dragonfly netbsd openbsd),YES,NO))
SplitObjsBroken = @SplitObjsBroken@

SupportsSplitObjs := $(strip \
                    $(if $(and $(filter YES,$(ArchSupportsSplitObjs)),\
                               $(filter YES,$(OsSupportsSplitObjs)),\
                               $(filter NO,$(SplitObjsBroken)),\
                               $(filter NO,$(GhcUnregisterised))),\
                          YES,NO))

# By default, enable SplitObjs for the libraries if this build supports it
SplitObjs=$(SupportsSplitObjs)

# ----------------------------------------------------------------------------
# Package-related things

# Whether to install the extra packages
InstallExtraPackages = NO

# Run "ghc-pkg check" on each package
CHECK_PACKAGES = NO

# ----------------------------------------------------------------------------

# There are a number of things which technically depend on GHC (e.g. if
# ghc changes then Haskell files may be compiled differently, or Cabal
# packages may be configured differently). By default we therefore
# have dependencies on the compiler executable.

# However, in practice, having a dependency on GHC is just a pain: We
# normally don't want to spend time recompiling other things while
# we're working on the compiler, and even if we did, GHC will normally
# decide compilation isn't needed anyway. So by setting LAX_DEPENDENCIES
# to YES you can turn these dependencies into order-only dependencies,
# i.e. GHC must exist, but if it's newer than other targets then
# rebuilding is not necessary.

LAX_DEPENDENCIES = NO

# ----------------------------------------------------------------------------
# Options for GHC's RTS

# Build an optimised RTS.  Remember that we need to turn on
# optimisation both for C code (-optc-O2) and .cmm code (-O2).  For
# the debugging RTS flavour, rts/ghc.mk overrides these to turn off
# optimisation.
GhcRtsHcOpts=-O2
GhcRtsCcOpts=-O2 -fomit-frame-pointer -g

# Include support for CPU performance counters via the PAPI library in the RTS?
# (PAPI: http://icl.cs.utk.edu/papi/)
GhcRtsWithPapi = NO
PapiLibDir=
PapiIncludeDir=

# Configuration for libffi
UseSystemLibFFI=@UseSystemLibFFI@
# Flags to go into package.conf for rts
FFILibDir=@FFILibDir@
FFIIncludeDir=@FFIIncludeDir@


################################################################################
#
#		Paths (see paths.mk)
#
################################################################################

# Directory used by GHC (and possibly other tools) for storing
# temporary files.  If your TMPDIR isn't big enough, either override
# this in build.mk or set your environment variable "TMPDIR" to point
# to somewhere with more space.  (TMPDIR=. is a good choice).

# DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
# override an environment variable with the value of the make variable
# of the same name (if it exists) when executing sub-processes, so
# setting the TMPDIR env var would have no effect in the build tree.

DEFAULT_TMPDIR		= /tmp
ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
DEFAULT_TMPDIR		= /C/TEMP
endif
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
DEFAULT_TMPDIR		= /C/TEMP
endif

BIN_DIST_NAME         = ghc-$(ProjectVersion)
BIN_DIST_PREP_DIR     = bindistprep/$(BIN_DIST_NAME)
BIN_DIST_PREP_TAR     = bindistprep/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
BIN_DIST_PREP_TAR_COMP = $(BIN_DIST_PREP_TAR).$(TAR_COMP_EXT)
BIN_DIST_TAR_COMP     = $(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.$(TAR_COMP_EXT)

# -----------------------------------------------------------------------------
# Utilities programs: flags

# If you want to give any standard flags to pretty much any utility
# (see utils.mk for a complete list), by adding a line here
#
# 	SRC_P_OPTS += ...
#
# where P is the utility. For example, to add -O to all Haskell
# compilations,
#
#	SRC_HC_OPTS += -O


# SRC_HC_OPTS includes flags to be added to *every* Haskell
# compilation.  Setting SRC_HC_OPTS is a good way to set the default
# optimisation level (-O) and heap size (-H<size>).
#
# SRC_HC_OPTS is *not* for adding flags that are required to make your
# build work.  Examples:
#
#  - instead of using -pgmc/-pgma-/-pgml, use the --with-gcc option to configure
#
#  - if you need -optc, -opta, or -optl flags, the CONF_CC_* and CONF_LD_*
#    variables are more appropriate (set via configure)
#
# Note that SRC_HC_OPTS are added to every Haskell compilation,
# including when using the bootstrapping compiler (stage 0), So don't
# put options here that are only supported by very recent GHCs.
#
SRC_HC_OPTS += -H32m -O

# Disable -O2 optimization. Otherwise amount of generated C code
# makes things very slow to compile (~5 minutes on core-i7 for 'compiler/hsSyn/HsExpr.lhs')
# and sometimes not compile at all (powerpc64 overflows something
# on 'compiler/hsSyn/HsExpr.lhs').
ifeq "$(GhcUnregisterised)" "YES"
GhcStage1HcOpts=
GhcStage2HcOpts=
GhcStage3HcOpts=
endif

# -----------------------------------------------------------------------------
# Names of programs in the GHC tree

MKDIRHIER           = $(INPLACE_BIN)/mkdirhier

GENERATED_FILE  = chmod a-w
EXECUTABLE_FILE = chmod +x

#-----------------------------------------------------------------------------
# Installed GHC

# $(GHC) points to installed version of the compiler.
#
# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
# (because the version numbers have to be calculated).

GHC := @WithGhc@
# If we have a make dependency on c:/ghc/ghc, and the file is actually
# called c:/ghc/ghc.exe, then make will think that ghc doesn't exist
# and that it doesn't know how to create it.
ifneq "$(wildcard $(GHC).exe)" ""
GHC := $(GHC).exe
endif

GHC_STAGE0  = $(GHC)
GHC_STAGE1  = $(ghc-stage1_INPLACE)
GHC_STAGE2  = $(ghc-stage2_INPLACE)
GHC_STAGE3  = $(ghc-stage3_INPLACE)

BOOTSTRAPPING_CONF = libraries/bootstrapping.conf

INPLACE_PACKAGE_CONF = $(INPLACE_LIB)/package.conf.d

GhcVersion	= @GhcVersion@
GhcPatchLevel	= @GhcPatchLevel@
GhcMajVersion	= @GhcMajVersion@
GhcMinVersion	= @GhcMinVersion@

# Canonicalised ghc version number, used for easy (integer) version
# comparisons.  We must expand $(GhcMinVersion) to two digits by
# adding a leading zero if necessary:
ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
else
GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
endif

GHC_PACKAGE_DB_FLAG = @GHC_PACKAGE_DB_FLAG@

CMM_SINK_BOOTSTRAP_IS_NEEDED = @CMM_SINK_BOOTSTRAP_IS_NEEDED@

SUPPORTS_PACKAGE_KEY = @SUPPORTS_PACKAGE_KEY@

#-----------------------------------------------------------------------------
# C compiler
#
# NB. Don't override $(WhatGccIsCalled) using build.mk,  re-configure using
# the flag --with-gcc=<blah> instead.  The reason is that the configure script
# needs to know which gcc you're using in order to perform its tests.

WhatGccIsCalled       = @WhatGccIsCalled@
GccVersion            = @GccVersion@
ifeq "$(phase)" "0"
CrossCompilePrefix    =
else
CrossCompilePrefix    = @CrossCompilePrefix@
endif
# TargetPlatformFull retains the string passed to configure so we have it in
# the necessary format to pass to libffi's configure.
TargetPlatformFull    = @TargetPlatformFull@
GccLT34         = @GccLT34@
GccLT46         = @GccLT46@
GccIsClang      = @GccIsClang@

CC              = $(WhatGccIsCalled)
CC_STAGE0       = @CC_STAGE0@
CC_STAGE1       = $(CC)
CC_STAGE2       = $(CC)
CC_STAGE3       = $(CC)

AS              = $(WhatGccIsCalled)
AS_STAGE0       = @CC_STAGE0@
AS_STAGE1       = $(AS)
AS_STAGE2       = $(AS)
AS_STAGE3       = $(AS)

# We don't have an LD_STAGE0.  CC_STAGE0 is determined by asking "ghc
# --info", and it doesn't report an LD.
LD_STAGE0       = error-no-ld-stage0
LD_STAGE1       = $(LD)
LD_STAGE2       = $(LD)
LD_STAGE3       = $(LD)

# Cross-compiling options
#
CrossCompiling        = @CrossCompiling@

# Change this to YES if you're building a cross-compiler and don't
# want to build stage 2.
Stage1Only = NO

# Install stage 2 by default, or stage 1 in the cross compiler
# case. Can be changed to 3
INSTALL_GHC_STAGE= $(if $(filter YES,$(Stage1Only)),1,2)

# C compiler and linker flags from configure (e.g. -m<blah> to select
# correct C compiler backend). The stage number is the stage of GHC
# that is being used to compile with.
CONF_CC_OPTS_STAGE0 = @CONF_CC_OPTS_STAGE0@
CONF_CC_OPTS_STAGE1 = @CONF_CC_OPTS_STAGE1@
CONF_CC_OPTS_STAGE2 = @CONF_CC_OPTS_STAGE2@
CONF_GCC_LINKER_OPTS_STAGE0 = @CONF_GCC_LINKER_OPTS_STAGE0@
CONF_GCC_LINKER_OPTS_STAGE1 = @CONF_GCC_LINKER_OPTS_STAGE1@
CONF_GCC_LINKER_OPTS_STAGE2 = @CONF_GCC_LINKER_OPTS_STAGE2@
CONF_LD_LINKER_OPTS_STAGE0 = @CONF_LD_LINKER_OPTS_STAGE0@
CONF_LD_LINKER_OPTS_STAGE1 = @CONF_LD_LINKER_OPTS_STAGE1@
CONF_LD_LINKER_OPTS_STAGE2 = @CONF_LD_LINKER_OPTS_STAGE2@
CONF_CPP_OPTS_STAGE0 = @CONF_CPP_OPTS_STAGE0@
CONF_CPP_OPTS_STAGE1 = @CONF_CPP_OPTS_STAGE1@
CONF_CPP_OPTS_STAGE2 = @CONF_CPP_OPTS_STAGE2@

ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
CONF_CC_OPTS += -G0
endif

# The .hsc files aren't currently safe for cross-compilation on Windows:
#     libraries\haskeline\.\System\Console\Haskeline\Backend\Win32.hsc:160
#     directive "let" is not safe for cross-compilation
ifneq "$(Windows_Host)" "YES"
SRC_HSC2HS_OPTS += --cross-safe
endif
SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))

define set_stage_HSC2HS_OPTS
# $1 = stage
SRC_HSC2HS_OPTS_STAGE$1 += $$(addprefix --cflag=,$$(filter-out -O,$$(SRC_CC_OPTS) $$(CONF_CC_OPTS_STAGE$1)))
SRC_HSC2HS_OPTS_STAGE$1 += $$(addprefix --cflag=,$$(CONF_CPP_OPTS_STAGE$1))
SRC_HSC2HS_OPTS_STAGE$1 += $$(addprefix --lflag=,$$(CONF_GCC_LINKER_OPTS_STAGE$1))
endef
$(eval $(call set_stage_HSC2HS_OPTS,0))
$(eval $(call set_stage_HSC2HS_OPTS,1))
$(eval $(call set_stage_HSC2HS_OPTS,2))
ifeq "$(CrossCompiling)" "YES"
SRC_HSC2HS_OPTS_STAGE1 += --cross-compile
SRC_HSC2HS_OPTS_STAGE2 += --cross-compile
endif
SRC_HSC2HS_OPTS_STAGE0 += --cflag=-D$(HostArch_CPP)_HOST_ARCH=1 --cflag=-D$(HostOS_CPP)_HOST_OS=1
SRC_HSC2HS_OPTS_STAGE1 += --cflag=-D$(TargetArch_CPP)_HOST_ARCH=1 --cflag=-D$(TargetOS_CPP)_HOST_OS=1
SRC_HSC2HS_OPTS_STAGE2 += --cflag=-D$(TargetArch_CPP)_HOST_ARCH=1 --cflag=-D$(TargetOS_CPP)_HOST_OS=1

ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
WINDRES = $(INPLACE_MINGW)/bin/windres
else ifeq "$(TARGETPLATFORM)" "x86_64-unknown-mingw32"
WINDRES = $(INPLACE_MINGW)/bin/windres
endif

#-----------------------------------------------------------------------------
# Mingwex Library
#
HaveLibMingwEx	= @HaveLibMingwEx@
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
DLLTOOL			= inplace/mingw/bin/dlltool.exe
else ifeq "$(TARGETPLATFORM)" "x86_64-unknown-mingw32"
DLLTOOL			= inplace/mingw/bin/dlltool.exe
endif

#-----------------------------------------------------------------------------
# Other standard (ha!) Unix utilities

AR			= @ArCmd@
AR_OPTS			= @ArArgs@
ArSupportsAtFile = @ArSupportsAtFile@

AR_STAGE0 = @AR_STAGE0@
AR_STAGE1 = $(AR)
AR_STAGE2 = $(AR)
AR_STAGE3 = $(AR)
AR_OPTS_STAGE0 = @AR_OPTS_STAGE0@
AR_OPTS_STAGE1 = $(AR_OPTS)
AR_OPTS_STAGE2 = $(AR_OPTS)
AR_OPTS_STAGE3 = $(AR_OPTS)
EXTRA_AR_ARGS_STAGE0 = $(EXTRA_AR_ARGS)
EXTRA_AR_ARGS_STAGE1 = $(EXTRA_AR_ARGS)
EXTRA_AR_ARGS_STAGE2 = $(EXTRA_AR_ARGS)
EXTRA_AR_ARGS_STAGE3 = $(EXTRA_AR_ARGS)
ArSupportsAtFile_STAGE0 = @ArSupportsAtFile_STAGE0@
ArSupportsAtFile_STAGE1 = $(ArSupportsAtFile)
ArSupportsAtFile_STAGE2 = $(ArSupportsAtFile)
ArSupportsAtFile_STAGE3 = $(ArSupportsAtFile)

CONTEXT_DIFF		= @ContextDiffCmd@
CP			= cp

# It's not easy to separate the CPP program from its flags, as
# AC_PROG_CPP defines CPP as "/usr/bin/gcc -E"
CPP			= @CPP@ @CPPFLAGS@
HS_CPP			= @HaskellCPPCmd@ @HaskellCPPArgs@

FIND			= @FindCmd@

#
# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
# install-sh script (if chosen). This not terribly useful to us, so we convert
# it into an abs. path.
#
INSTALL			= @INSTALL@
INSTALL			:= $(subst .././install-sh,$(TOP)/install-sh,$(INSTALL))

LN_S			= @LN_S@
MV			= mv
PERL 			= @PerlCmd@
PIC			= pic
RANLIB_CMD = @RANLIB_CMD@
REAL_RANLIB_CMD = @REAL_RANLIB_CMD@
SED			= @SedCmd@
SHELL			= @SHELL@

HaveDtrace		= @HaveDtrace@
USE_DTRACE = $(HaveDtrace)
DTRACE			= @DtraceCmd@

LD = @LdCmd@
NM = @NmCmd@
AR = @ArCmd@
OBJDUMP = @ObjdumpCmd@

LLC = @LlcCmd@
OPT = @OptCmd@

# GNU ld supports input via a linker script, which is useful to avoid
# overflowing command-line length limits.
LdIsGNULd		= @LdIsGNULd@

# Set to YES if ld has the --build-id flag.  Sometimes we need to
# disable it with --build-id=none.
LdHasBuildId	        = @LdHasBuildId@

# Set to YES if ld has the --no_compact_unwind flag. See #5019
# and compiler/main/DriverPipeline.hs.
LdHasNoCompactUnwind	= @LdHasNoCompactUnwind@

# On MSYS, building with SplitObjs=YES fails with
#   ar: Bad file number
# see #3201.  We need to specify a smaller max command-line size
# to work around it.  32767 doesn't work; 30000 does, but says
#     xargs: value for -s option should be < 28153
# so we now use 20000 to be comfortably below this bound
XARGS = xargs
ifeq "$(Windows_Host)" "YES"
XARGS_OPTS = -s 20000
endif

ifeq "$(TARGETPLATFORM)" "x86_64-unknown-mingw32"
STRIP_CMD      = $(TOP)/inplace/mingw/bin/strip.exe
else
STRIP_CMD      = strip
endif
PATCH_CMD      = @PatchCmd@
TAR_CMD        = @TarCmd@
BZIP2_CMD      = bzip2
GZIP_CMD       = gzip
XZ_CMD         = xz -9e

# bzip2 is default compression
TAR_COMP      = bzip2

# select compression command and .tar extension based on TAR_COMP value
ifeq "$(TAR_COMP)" "bzip2"
TAR_COMP_CMD  = $(BZIP2_CMD)
TAR_COMP_EXT  = bz2
else ifeq "$(TAR_COMP)" "gzip"
TAR_COMP_CMD  = $(GZIP_CMD)
TAR_COMP_EXT  = gz
else ifeq "$(TAR_COMP)" "xz"
TAR_COMP_CMD  = $(XZ_CMD)
TAR_COMP_EXT  = xz
else
$(error $$(TAR_COMP) set to unknown value "$(TAR_COMP)" (supported: "bzip2", "gzip", "xz"))
endif

ifeq "$(Windows_Host)" "YES"
TOUCH_CMD      = $(utils/touchy_dist_INPLACE)
TOUCH_DEP      = $(TOUCH_CMD)
else
TOUCH_CMD      = touch
TOUCH_DEP      =
endif

HSCOLOUR_CMD   = @HSCOLOUR@

TIME_CMD       = @TimeCmd@

#-----------------------------------------------------------------------------
# DocBook XML stuff

BUILD_DOCBOOK_HTML       = @BUILD_DOCBOOK_HTML@
BUILD_DOCBOOK_PS         = @BUILD_DOCBOOK_PS@
BUILD_DOCBOOK_PDF        = @BUILD_DOCBOOK_PDF@
DBLATEX                  = @DblatexCmd@
# filename.as.url=0 is needed with dblatex 0.3.4 (#7486)
DBLATEX_OPTS             = -P 'filename.as.url=0'
XSLTPROC                 = @XsltprocCmd@
XMLLINT                  = @XmllintCmd@
HAVE_DOCBOOK_XSL	 = @HAVE_DOCBOOK_XSL@
XSLTPROC_HTML_STYLESHEET = http://docbook.sourceforge.net/release/xsl/current/html/chunk.xsl
XSLTPROC_LABEL_OPTS	 = --stringparam toc.section.depth 3 \
			   --stringparam section.autolabel 1 \
			   --stringparam section.label.includes.component.label 1

#-----------------------------------------------------------------------------
# 		FPtools support software

#
# ghc-pkg
#
GHC_PKG		        = @GhcPkgCmd@

#
# Happy
#
HAPPY			= @HappyCmd@
HAPPY_VERSION		= @HappyVersion@
#
# Options to pass to Happy when we're going to compile the output with GHC
#
SRC_HAPPY_OPTS		= -agc --strict

#
# Alex
#
ALEX			= @AlexCmd@
ALEX_VERSION		= @AlexVersion@
Alex3			= @Alex3@
#
# Options to pass to Alex when we're going to compile the output with GHC
#
SRC_ALEX_OPTS = -g
ifeq "$(Alex3)" "YES"
# The compiler isn't using the Unicode support in Alex 3.0 yet, in fact we do our own
# Unicode handling, so diable Alex's.
compiler_ALEX_OPTS = --latin1
endif

# Should we build haddock docs?
HADDOCK_DOCS = YES
# And HsColour the sources?
ifeq "$(HSCOLOUR_CMD)" ""
HSCOLOUR_SRCS = NO
else
HSCOLOUR_SRCS = YES
endif

# Build DPH?
BUILD_DPH = NO

################################################################################
#
#    Library configure arguments
#
################################################################################

CONFIGURE_ARGS = @CONFIGURE_ARGS@

################################################################################
#
#    To be passed to sub-builds
#
################################################################################

ICONV_INCLUDE_DIRS = @ICONV_INCLUDE_DIRS@
ICONV_LIB_DIRS = @ICONV_LIB_DIRS@

GMP_INCLUDE_DIRS = @GMP_INCLUDE_DIRS@
GMP_LIB_DIRS = @GMP_LIB_DIRS@

CURSES_INCLUDE_DIRS = @CURSES_INCLUDE_DIRS@
CURSES_LIB_DIRS = @CURSES_LIB_DIRS@