{- This test runs for a Long Time (10mins for the registerised version) and allocates 3.4Gbytes. It also hammers the GC; with -H16M it spend 40% of the time in the GC. Date: Sun, 25 Oct 92 16:38:12 GMT From: Julian Seward (DRL PhD) Message-Id: <9210251638.AA21153@r6b.cs.man.ac.uk> To: partain@uk.ac.glasgow.dcs Subject: Space consumption in 0.09 produced binary Cc: sewardj@uk.ac.man.cs, simonpj@uk.ac.glasgow.dcs Folks, At the risk of wasting even more of your valuable time, here is a small problem I ran into: The program (XXXX.lhs) listed below runs in constant space (about 4k) in both Gofer and hbc 0.998.5. When compiled with 0.09, it runs out of heap in seconds (4 meg heap). The program builds a gigantic list of things (CDSs, in fact), I believe at least 100,000 long, and searches to find out if a particular CDS is present. The CDS list is generated lazily, and should be thrown away as it goes, until apply_cds is found (see the bottom of the listing). Gofer and hbc behave as expected, but I suspect ghc is holding onto the complete list unnecessarily. I include XXXX.stat as supporting evidence. Jules (compiled hence: ghc9 -v -O -gc-ap -flet-float -Rgc-stats -Rmax-heapsize 14M -o XXXX XXXX.lhs ) ----------------------------------------------------------------------- XXXX +RTS -S Collector: APPEL HeapSize: 4,194,304 (bytes) Alloc Live Live Astk Bstk OldGen GC GC TOT TOT Page Flts Collec Resid bytes bytes % bytes bytes roots user elap user elap GC TOT tion %heap 2097108 1119672 53.4 52 132 1119616 0.33 0.35 1.01 1.15 0 0 Minor 1537300 918200 59.7 48 128 918188 0.26 0.31 1.76 1.95 0 0 Minor 1078216 654212 60.7 56 160 652612 0.19 0.18 2.29 2.46 0 0 Minor 751108 442140 58.9 52 108 442140 0.12 0.12 2.64 2.84 0 0 Minor 3134224 2935044 93.6 52 108 1.49 1.50 4.13 4.34 0 0 *MAJOR* 70.0% 629612 376848 59.9 52 132 376836 0.11 0.11 4.44 4.64 0 0 Minor 441184 265100 60.1 96 200 264416 0.08 0.07 4.66 4.86 0 0 Minor 308640 204072 66.1 56 160 199476 0.06 0.05 4.81 5.01 0 0 Minor 3781064 3687092 97.5 56 160 1.81 1.85 6.62 6.86 0 0 *MAJOR* 87.9% 253600 160584 63.3 52 108 160584 0.05 0.04 6.75 6.98 0 0 Minor 173312 112344 64.8 56 160 110304 0.03 0.03 6.83 7.07 0 0 Minor 117128 77260 66.0 36 140 74112 0.01 0.02 6.88 7.13 0 0 Minor 4037280 3985284 98.7 36 140 1.96 1.98 8.85 9.11 0 0 *MAJOR* 95.0% ------------------------------------------------------------------------- -} > module Main where %============================================================ %============================================================ \section{A CDS interpreter} \subsection{Declarations} Second attempt at a CDS interpreter. Should do loop detection correctly in the presence of higher order functions. The types allowed are very restrictive at the mo. > data Type = Two > | Fn [Type] Now, we also have to define CDSs and selectors. \begin{itemize} \item @Empty@ is a non-legitimate CDS, denoting no value at all. We use it as an argument in calls to other CDSs denoting that the particular argument is not really supplied. \item @Par@ is similarly a non-legit CDS, but useful for constructing selectors. It simply denotes the parameter specified (note parameter numbering starts at 1). \item @Zero@ and @One@ are constant valued CDSs. \item @Call@. Calls to other functions are done with @Call@, which expects the callee to return @Zero@ or @One@, and selects the relevant branch. The @Tag@s identify calls in the dependancy list. Although a @Call@ is a glorified @Case@ statement, the only allowed return values are @Zero@ and @One@. Hence the @CDS CDS@ continuations rather than the more comprehensive @(AList Return CDS)@. We require arguments to be fully disassembled. \item @Case@ Case selectors can only be of the following form: \begin{itemize} \item @[Par n]@ if the n'th parameter is not a function space. \item @[Par n, v1 ... vn]@ if the n'th parameter is a function space of arity n. The v's may be only @Empty@, @Zero@, @One@, or @Par n@. \end{itemize} \end{itemize} We also have a @Magic@ CDS which is a load of mumbo-jumbo for use in enumeration of and compilation to CDSs. Of no significance whatever here. > data CDS = Empty > | Par Int > | Zero > | One > | Case [CDS] (AList Return CDS) > | Call String Tag [CDS] CDS CDS > | Magic > > type AList a b = [(a, b)] > > type Tag = Int > instance Eq CDS where > (Par n1) == (Par n2) = n1 == n2 > Zero == Zero = True > One == One = True > (Case sels1 rets1) == (Case sels2 rets2) = sels1 == sels2 && > rets1 == rets2 > (Call f1 t1 sels1 a1 b1) == (Call f2 t2 sels2 a2 b2) > = f1 == f2 && t1 == t2 && sels1 == sels2 && a1 == a2 && b1 == b2 > Magic == Magic = True > _ == _ = False A @Return@ is a temporary thing used to decide which way to go at a @Case@ statement. > data Return = RZero > | ROne > | RP Int > instance Eq Return where > RZero == RZero = True > ROne == ROne = True > (RP p1) == (RP p2) = p1 == p2 > _ == _ = False We need a code store, which gives out a fresh instance of a CDS as necessary. ToDo: Need to rename call sites? I don't think so. > type Code = AList String CDS %============================================================ %============================================================ \subsection{The evaluator} Main CDS evaluator takes \begin{itemize} \item the code store \item the dependancy list, a list of @Tag@s of calls which are currently in progress \item the current arguments \item the CDS fragment currently being worked on \end{itemize} > type Depends = [Tag] > > eval :: Code -> Depends -> [CDS] -> CDS -> CDS Evaluating a constant valued CDS is trivial. There may be arguments present -- this is not a mistake. > eval co de args Zero = Zero > eval co de args One = One Making a call is also pretty simple, because we assume that all non-functional arguments are presented as literals, and all functional values have already been dismantled (unless they are being passed unchanged in the same position in a recursive call to the same function, something for the compiler to detect). Two other issues are at work here. Guided by the selectors, we copy the args to make a set of args for the call. However, if an copied arg is Empty, the call cannot proceed, so we return the CDS as-is. Note that an Empty *selector* is not allowed in a Call (although it is in a Case). The second issue arises if the call can go ahead. We need to check the tag on the call just about to be made with the tags of calls already in progress (in de) to see if we are looping. If the tag has already been encountered, the result of the call is Zero, so the Zero alternative is immediately selected. > eval co de args cds@(Call fname tag params alt0 alt1) > = let (copied_an_empty, callee_args) = copy_args args params > augmented_de = tag : de > callee_code = lkup co fname > callee_result = eval co augmented_de callee_args callee_code > been_here_before = tag `elem` de > in > if copied_an_empty > then cds > else > if been_here_before > then eval co augmented_de args alt0 > else case callee_result of > Zero -> eval co de args alt0 > One -> eval co de args alt1 > _ -> error "Bad callee result" Case really means "evaluate". - make sure first selector is non-Empty. If so, return CDS as-is. - Copy other args. If Empty is *copied*, return CDS as-is. Otherwise, call evaluator and switch on head of result. Note about switching on the head of the result. We expect to see *only* the following as results: Zero One Case [Param m, rest] in which case switching is performed on Zero One Case (Param m) ToDo: what happens if a Call turns up ??? > eval co de args cds@(Case ((Par n):ps) alts) > = let (copied_an_empty, new_args) = copy_args args ps > functional_param = args !! (n-1) > in if functional_param == Empty || > copied_an_empty > then cds > else eval co de args > (lkup alts (get_head > (eval co de new_args functional_param))) Auxiliary for evaluating Case expressions. > get_head Zero = RZero > get_head One = ROne > get_head (Case ((Par n):_) _) = RP n Copy args based on directions in a list of selectors. Also returns a boolean which is True if an Empty has been *copied*. An Empty *selector* simply produces Empty in the corresponding output position. > copy_args :: [CDS] -> [CDS] -> (Bool, [CDS]) > > copy_args args params > = case cax False params [] of > (empty_copied, res) -> (empty_copied, reverse res) > where > cax empty [] res = (empty, res) > cax empty (Zero:ps) res = cax empty ps (Zero:res) > cax empty (One:ps) res = cax empty ps (One:res) > cax empty (Empty:ps) res = cax empty ps (Empty:res) > cax empty ((Par n):ps) res > = case args !! (n-1) of > Empty -> cax True ps (Empty:res) > other -> cax empty ps (other:res) > lkup env k = head ( [v | (kk,v) <- env, kk == k] ++ > [error ( "Can't look up " ) ] ) %============================================================ %============================================================ %============================================================ %============================================================ Something to make running tests easier ... > eval0 fname args = eval test [] args (lkup test fname) > > two = [Zero, One] Now for some test data ... > test > = > [ > ("add", add_cds), > ("apply", apply_cds), > ("k0", k0_cds), > ("id", id_cds), > ("k1", k1_cds), > ("kkkr", kkkr_cds), > ("kkkl", kkkl_cds), > ("apply2", apply2_cds) > ] > Constant Zero function. > k0_cds > = Case [Par 1] > [(RZero, Zero), > (ROne, Zero)] > Identity. > id_cds > = Case [Par 1] > [(RZero, Zero), > (ROne, One)] Constant One function. > k1_cds > = Case [Par 1] > [(RZero, One), > (ROne, One)] Strict in both of two arguments, for example (+). > add_cds > = Case [Par 1] > [(RZero, Case [Par 2] > [(RZero, Zero), > (ROne, Zero) > ]), > (ROne, Case [Par 2] > [(RZero, Zero), > (ROne, One) > ]) > ] The (in)famous apply function. > apply_cds > = Case [Par 1, Empty] > [(RZero, Zero), > (ROne, One), > (RP 1, Case [Par 2] > [(RZero, Case [Par 1, Zero] > [(RZero, Zero), > (ROne, One)]), > (ROne, Case [Par 1, One] > [(RZero, Zero), > (ROne, One)]) > ]) > ] The inverse K-combinator: K x y = y > kkkr_cds > = Case [Par 2] > [(RZero, Zero), > (ROne, One) > ] The standard K-combinator, defined thus: K x y = K-inverse y x. Purpose of this is to test function calling. > kkkl_cds > = Case [Par 1] > [(RZero, Case [Par 2] > [(RZero, Call "kkkr" 101 [Zero, Zero] Zero One), > (ROne, Call "kkkr" 102 [One, Zero] Zero One) > ]), > (ROne, Case [Par 2] > [(RZero, Call "kkkr" 103 [Zero, One] Zero One), > (ROne, Call "kkkr" 104 [One, One] Zero One) > ]) > ] Apply a 2-argument function (apply2 f x y = f x y). > apply2_cds > = Case [Par 1, Empty, Empty] > [(RZero, Zero), > (ROne, One), > (RP 1, Case [Par 2] > [(RZero, Case [Par 1, Zero, Empty] > [(RZero, Zero), > (ROne, One), > (RP 2, Case [Par 3] > [(RZero, Case [Par 1, Zero, Zero] > [(RZero, Zero), > (ROne, One)]), > (ROne, Case [Par 1, Zero, One] > [(RZero, Zero), > (ROne, One)]) > ]) > ]), > (ROne, Case [Par 1, One, Empty] > [(RZero, Zero), > (ROne, One), > (RP 2, Case [Par 3] > [(RZero, Case [Par 1, One, Zero] > [(RZero, Zero), > (ROne, One)]), > (ROne, Case [Par 1, One, One] > [(RZero, Zero), > (ROne, One)]) > ]) > ]) > ]), > (RP 2, Case [Par 3] > [(RZero, Case [Par 1, Empty, Zero] > [(RZero, Zero), > (ROne, One), > (RP 1, Case [Par 2] > [(RZero, Case [Par 1, Zero, Zero] > [(RZero, Zero), > (ROne, One)]), > (ROne, Case [Par 1, One, Zero] > [(RZero, Zero), > (ROne, One)]) > ]) > ]), > (ROne, Case [Par 1, Empty, One] > [(RZero, Zero), > (ROne, One), > (RP 1, Case [Par 2] > [(RZero, Case [Par 1, Zero, One] > [(RZero, Zero), > (ROne, One)]), > (ROne, Case [Par 1, One, One] > [(RZero, Zero), > (ROne, One)]) > ]) > ]) > ]) > ] Simple, isn't it! %============================================================ %============================================================ %============================================================ %============================================================ Enumeration of all CDSs of a given type. Define n-ary branched trees. These are used to hold the possible prefixes of function arguments, something essential when enumerating higher-order CDSs. ToDo: translate to English > data NTree a = NLeaf > | NBranch a [NTree a] The enumeration enterprise involves some mutual recursion when it comes to higher-order functions. We define the top-level enumerator function, for trivial cases, hence: > enumerate :: Type -> [CDS] > > enumerate Two = [Zero, One] > enumerate (Fn ats) = > expand_templates (traverse (length ats) (gen_pfx_trees ats)) Enumerating a function space is tricky. In summary: - Generate the prefix trees for each argument. For non-function arguments this trivial, but for function-valued arguments this means a call to the enumerator to get all the possible values of the (argument) function space. - Traverse the prefix trees, generating a series of "templates" for functions. - Expand each template thus generated into a genuine CDS. Each template denotes a group of CDSs, all of the same "shape" and differing only in the constants they return. The Magic and RMagic constructors are used for these purposes. Generating prefix trees. For a Two-argument, is easy: > gen_pfx_trees :: [Type] -> [NTree [CDS]] > > gen_pfx_trees ts = zipWith gen_pfx_tree ts [1 .. length ts] > > gen_pfx_tree :: Type -> Int -> NTree [CDS] > > gen_pfx_tree Two n = NBranch [Par n] [] Note all prefixes are missing the initial (Par n) selector ... For a function arg - enumerate each of the *function's* args - starting with a selector [Empty, ...., Empty], make a tree wherein at each level, branching is achieved by filling in every Empty with every value of that argument type. ToDo: fix this > gen_pfx_tree (Fn arg_types) n > = let number_args = length arg_types > enumed_args = map enumerate arg_types > initial_sel = take number_args (repeat Empty) > init_tree = NBranch ((Par n):initial_sel) [] > in > expand_pfx_tree number_args number_args n enumed_args init_tree @expand_pfx_tree@ expands a tree until there are no Emptys at the leaves. Its first parameter is the number of Emptys in the tree it has been given; when zero, expansion is complete. The second parameter is the number of Emptys in the original tree (equal to the arity of the function being enumerated). Third number is the argument number in the top-level function, needed to make the initial "Par n" selector. Also needs to carry around the enumeration of the function's arguments. > expand_pfx_tree :: Int -> Int -> Int -> [[CDS]] -> NTree [CDS] -> NTree [CDS] > > expand_pfx_tree 0 w i enums tree = tree > > expand_pfx_tree n w i enums (NBranch sels []) > = let indices = [0 .. w - 1] > n_minus_1 = n - 1 > new_sels = concat (map expand_sel indices) > expand_sel n > = case sels !! (n+1) of > Empty -> map (upd (n+1) sels) (enums !! n) > other -> [] > mk_trivial_tree sel = NBranch sel [] > in > NBranch sels (map (expand_pfx_tree n_minus_1 w i enums . mk_trivial_tree) > new_sels) > upd :: Int -> [a] -> a -> [a] > upd 0 (y:ys) x = x:ys > upd n (y:ys) x = y:upd (n-1) ys x In the second phase, the prefix trees are traversed to generate CDS templates (full of Magic, but no Zero or One). The first arg is the number of arguments, and the second the prefix trees for each argument. > traverse :: Int -> [NTree [CDS]] -> [CDS] Each pfxtree denotes a selector, one for each argument, plus a load of more specific selectors. So for each argument, one manufactures all possible sub-cds using the sub-selectors as the set Z. You then take this arg's selector, and manufacture a load of CDSs like this: \begin{verbatim} Case this_selector 0 -> z | z <- Z 1 -> z | z <- Z Par n -> z | z <- Z for each n in [1 .. length this_selector] satisfying this_selector !! n == Empty \end{verbatim} > traverse n pfxtrees > = Magic : concat (map doOne [0 .. n - 1]) > where > doOne i = traverse_arg n i pfxtrees (pfxtrees !! i) @traverse_arg@ makes the CDSs corresponding to descending a particular argument, the number of which is given as its second parameter. It also gets the complete set of pfxtrees and the one to descend. Note that having descended in the given argument, we check its sub-selectors. If none, (an empty list), this replaced by [NLeaf] to make everything work out. A NLeaf selector is a dummy which generates no CDSs. > traverse_arg n i pfxtrees NLeaf > = [] > traverse_arg n i pfxtrees (NBranch this_selector subsidiary_selectors_init) > = let subsidiary_selectors > = case subsidiary_selectors_init of > [] -> [NLeaf]; (_:_) -> subsidiary_selectors_init > subsidiary_pfxtrees = map (upd i pfxtrees) subsidiary_selectors > par_requests = preq 1 [] this_selector > preq n acc [] = acc > preq n acc (Empty:rest) = preq (n+1) ((RP n):acc) rest > preq n acc (other:rest) = preq (n+1) acc rest > subsidiary_cdss = concat (map (traverse n) subsidiary_pfxtrees) > all_poss_rhss = splat (2 + length par_requests) subsidiary_cdss > all_poss_returns = [RZero, ROne] ++ par_requests > in > [Case this_selector (zip all_poss_returns rhs) > | rhs <- all_poss_rhss] > > splat :: Int -> [a] -> [[a]] > splat 0 set = [[]] > splat n set = [x:xs | x <- set, xs <- splat (n-1) set] The final stage in the game is to fill in all the @Magic@s with constants. A template with $n$ @Magic@s presently generates @2^n@ CDSs, obtained by all possible combinations of filling each @Magic@ in with @Zero@ or @One@. To do this we first need to count the @Magic@s. > count_magic :: CDS -> Int > > count_magic Magic = 1 > count_magic (Case sels alts) = sum (map (count_magic.snd) alts) We don't expect to see anything else at this stage. Now make $2^n$ lists, each of length $n$, each with a different sequence of @Zero@s and @One@s. Use these to label the @Magic@s in the template. > label_cds :: CDS -> [CDS] -> ([CDS], CDS) > > label_cds Magic (l:ls) = (ls, l) > label_cds (Case sels alts) ls > = case f ls alts of (l9, alts_done) -> (l9, Case sels alts_done) > where > f l0 [] = (l0, []) > f l0 (a:as) = let (l1, a_done) = lalt l0 a > (l2, as_done) = f l1 as > in (l2, a_done:as_done) > lalt l0 (ret, cds) = case label_cds cds l0 of > (l1, cds_done) -> (l1, (ret, cds_done)) Finally: > expand_templates :: [CDS] -> [CDS] > > expand_templates ts > = concat (map f ts) > where > f tem = map (snd . label_cds tem) > (splat (count_magic tem) [Zero, One]) --> testq tt = (layn . map show' . nub) (enumerate tt) > main = putStrLn (show (apply_cds `myElem` (enumerate (Fn [Fn [Two], Two])))) > > i `myElem` [] = False > i `myElem` (x:xs) = if i == x then True else i `myElem` xs %============================================================ %============================================================