From 6cb2859389bf2daf6ef67e5265e41d2fed9a53c9 Mon Sep 17 00:00:00 2001
From: Francis Dupont <fdupont@isc.org>
Date: Wed, 24 Sep 2008 08:37:24 +0000
Subject: DHCPv6 server example

---
 doc/examples/dhcpd-dhcpv6.conf | 97 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)
 create mode 100644 doc/examples/dhcpd-dhcpv6.conf

(limited to 'doc')

diff --git a/doc/examples/dhcpd-dhcpv6.conf b/doc/examples/dhcpd-dhcpv6.conf
new file mode 100644
index 00000000..f0ca175a
--- /dev/null
+++ b/doc/examples/dhcpd-dhcpv6.conf
@@ -0,0 +1,97 @@
+# Server configuration file example for DHCPv6
+# From the file used for TAHI tests.
+
+# IPv6 address valid lifetime
+#  (at the end the address is no longer usable by the client)
+#  (set to 30 days, the usual IPv6 default)
+default-lease-time 2592000;
+
+# IPv6 address preferred lifetime
+#  (at the end the address is deprecated, i.e., the client should use
+#   other addresses for new connections)
+#  (set to 7 days, the	usual IPv6 default)
+preferred-lifetime 604800;
+
+# T1, the delay before Renew
+#  (default is 1/2 preferred lifetime)
+#  (set to 1 hour)
+option dhcp-renewal-time 3600;
+
+# T2, the delay before Rebind (if Renews failed)
+#  (default is 3/4 preferred lifetime)
+#  (set to 2 hours)
+option dhcp-rebinding-time 7200;
+
+# Enable RFC 5007 support (same than for DHCPv4)
+allow leasequery;
+
+# Global definitions for name server address(es) and domain search list
+option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:3f3e;
+option dhcp6.domain-search "test.example.com","example.com";
+
+# Set preference to 255 (maximum) in order to avoid waiting for
+# additional servers when there is only one
+##option dhcp6.preference 255;
+
+# Server side command to enable rapid-commit (2 packet exchange)
+##option dhcp6.rapid-commit;
+
+# The delay before information-request refresh
+#  (minimum is 10 minutes, maximum one day, default is to not refresh)
+#  (set to 6 hours)
+option dhcp6.info-refresh-time 21600;
+
+# The path of the lease file
+dhcpv6-lease-file-name "/usr/local/var/db/dhcpd6.leases";
+
+# Static definition (must be global)
+host myclient {
+	# The entry is looked up by this
+	host-identifier option
+		dhcp6.client-id 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2;
+
+	# A fixed address
+	fixed-address6 3ffe:501:ffff:100::1234;
+
+	# A fixed prefix
+	fixed-prefix6 3ffe:501:ffff:101::/64;
+
+	# Override of the global definitions,
+	# works only when a resource (address or prefix) is assigned
+	option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:4f4e;
+
+	# For debug (to see when the entry statements are executed)
+	#  (log "sol" when a matching Solicitation is received)
+	##if packet(0,1) = 1 { log(debug,"sol"); }
+}
+
+# The subnet where the server is attached
+#  (i.e., the server has an address in this subnet)
+subnet6 3ffe:501:ffff:100::/64 {
+	# Two addresses available to clients
+	#  (the third client should get NoAddrsAvail)
+	range6 3ffe:501:ffff:100::10 3ffe:501:ffff:100::11;
+
+	# Use the whole /64 prefix for temporary addresses
+	#  (i.e., direct application of RFC 4941)
+	range6 3ffe:501:ffff:100:: temporary;
+
+	# Some /64 prefixes available for Prefix Delegation (RFC 3633)
+	prefix6 3ffe:501:ffff:100:: 3ffe:501:ffff:111:: /64;
+}
+
+# A second subnet behind a relay agent
+subnet6 3ffe:501:ffff:101::/64 {
+	range6 3ffe:501:ffff:101::10 3ffe:501:ffff:101::11;
+
+	# Override of the global definitions,
+	# works only when a resource (address or prefix) is assigned
+	option dhcp6.name-servers 3ffe:501:ffff:101:200:ff:fe00:3f3e;
+
+}
+
+# A third subnet behind a relay agent chain
+subnet6 3ffe:501:ffff:102::/64 {
+	range6 3ffe:501:ffff:102::10 3ffe:501:ffff:102::11;
+}
+
-- 
cgit v1.2.1