# Makefile.dist
#
# Copyright (c) 1996 The Internet Software Consortium.  All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. Neither the name of The Internet Software Consortium nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE INTERNET SOFTWARE CONSORTIUM AND
# CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
# THE INTERNET SOFTWARE CONSORTIUM OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
# OF THE POSSIBILITY OF SUCH DAMAGE.
#

## Defaults...
BINDIR = /usr/sbin
ADMMANDIR = /usr/share/man/cat8
ADMMANEXT = .0
FFMANDIR = /usr/share/man/cat5
FFMANEXT = .0
INSTALL = install
MANINSTALL = install
CHMOD = chmod
CATMANPAGES = dhcpd.cat8 dhcpd.conf.cat5
ETC = /etc
VARRUN = /var/run
VARDB = /var/db

## Porting::
#
# For each supported operating system, there is a block of text below
# beginning with #++os-name++ and ending with #--os-name--.   Between
# these delimiters are assignments, commented out, which define the
# Makefile variables required for that operating system.
#
# The configure shell script figures out what operating system it's
# being run on and then runs Makefile.dist through a sed script which
# removes the comment characters from the appropriate set of
# assignments, and writes the output to Makefile.

## SunOS 4.1
##++sunos4++
#LIBS = -lresolv
#CF = cf/sunos4.h
#BINDIR=/usr/etc
#ADMMANEXT = .8
#FFMANEXT = .5
#VARRUN = /etc
#VARDB = /etc
##--sunos4--

## Solaris 2.5 (with gcc)
##++sunos5++
#INSTALL=/usr/ucb/install
#MANINSTALL=/usr/ucb/install
#LIBS = -lresolv -lsocket -lnsl -lgen
#CC=gcc
#COPTS = -Wall -Wstrict-prototypes -Wno-unused -Wno-implicit -Wno-comment \
#	 -Wno-uninitialized -Werror
#CF = cf/sunos5-5.h
#ADMMANDIR = /usr/share/man/cat1m
#ADMMANEXT = .1m
#FFMANDIR = /usr/share/man/cat4
#FFMANEXT = .4
#VARRUN = /etc
#VARDB = /etc
##--sunos5--

## DEC Alpha/OSF1
##++alphaosf++
#INSTALL=/usr/ucb/installbsd
#MANINSTALL=/usr/ucb/installbsd
#LIBS=
#CF = cf/alphaosf.h
#ADMMANEXT = .8
#FFMANEXT = .5
#VARRUN = /etc
#VARDB = /etc
##--alphaosf--

## BSD/OS 2.1
##++bsdos++
#LIBS=
#CC=gcc2
#CF = cf/bsdos.h
##--bsdos--

## FreeBSD
##++freebsd++
#CF = cf/freebsd.h
##--freebsd--

## NetBSD
##++netbsd++
#CF = cf/netbsd.h
#COPTS  = -Wall -Wstrict-prototypes -Wno-unused -Wno-implicit -Wno-comment \
#	  -Wno-uninitialized -Werror
##--netbsd--

## Ultrix
##++ultrix++
#CF = cf/ultrix.h
#ADMMANDIR = /usr/man/man8
#ADMMANEXT = .8
#FFMANDIR = /usr/man/man5
#FFMANEXT = .5
##--ultrix--

## Linux
##++linux++
#CF = cf/linux.h
#ADMMANDIR = /usr/man/man8
#ADMMANEXT = .8
#FFMANDIR = /usr/man/man5
#FFMANEXT = .5
#VARRUN = /etc
##--linux--

## SCO
##++sco++
#CF = cf/sco.h
#PREDEFINES=-DSCO -DBROKEN_ANSI
#BINDUR = /usr/etc
#ADMMANDIR = /usr/man/cat.ADMN
#ADMMANEXT = .ADMN.Z
#FFMANDIR = /usr/man/cat.SFF
#FFMANEXT = .SFF.Z
#INSTALL = cp
#MANFROM = <
#MANINSTALL = compress
#MANTO = >
#VARRUN = /etc
#VARDB = /etc
#CATMANPAGES=
##--sco--

CSRC   = options.c errwarn.c convert.c \
	 tree.c memory.c alloc.c print.c hash.c tables.c inet.c \
	 dispatch.c bpf.c packet.c raw.c nit.c socket.c
COBJ   = options.o errwarn.o convert.o \
	 tree.o memory.o alloc.o print.o hash.o tables.o inet.o \
	 dispatch.o bpf.o packet.o raw.o nit.o socket.o
SRCS   = dhcpd.c dhcp.c bootp.c conflex.c confpars.c db.c
OBJS   = dhcpd.o dhcp.o bootp.o conflex.o confpars.o db.o
PROGS  = dhcpd dhclient
MAN    = dhcpd.8 dhcpd.conf.5

DEBUG  = -g
CFLAGS = $(DEBUG) $(PREDEFINES) $(INCLUDES) $(COPTS)

all:	dhcpd dhclient $(CATMANPAGES)

install: dhcpd $(CATMANPAGES)
	$(INSTALL) dhcpd $(BINDIR); $(CHMOD) 755 $(BINDIR)/dhcpd
	if [ ! -d $(ADMMANDIR) ]; then \
	  mkdir $(ADMMANDIR); \
	  chmod 755 $(ADMMANDIR); \
        fi
	if [ ! -d $(FFMANDIR) ]; then \
	  mkdir $(FFMANDIR); \
	  chmod 755 $(FFMANDIR); \
        fi
	$(MANINSTALL) $(MANFROM) dhcpd.cat8 $(MANTO) \
				$(ADMMANDIR)/dhcpd$(ADMMANEXT)
	$(MANINSTALL) $(MANFROM) dhcpd.conf.cat5 $(MANTO) \
				$(FFMANDIR)/dhcpd.conf$(FFMANEXT)

# These should only be done on 4.4 BSD-based systems, since the mandoc
# macros aren't available on older unices.   Catted man pages are
# provided in the distribution so that this doesn't become a problem.

dhcpd.cat8:	dhcpd.8
	sed -e "s#ETCDIR#$(ETC)#" -e "s#DBDIR#$(VARDB)#" \
		-e "s#RUNDIR#$(VARRUN)#" < dhcpd.8 \
			| nroff -man >dhcpd.cat8

dhcpd.conf.cat5:	dhcpd.conf.5
	nroff -man dhcpd.conf.5 >dhcpd.conf.cat5

dhcpd:	$(OBJS) $(COBJ)
	$(CC) -o dhcpd $(OBJS) $(COBJ) $(LIBS)

dhclient:	dhclient.o $(COBJ)
	$(CC) -o dhclient dhclient.o $(COBJ) $(LIBS)

# Dependencies (semi-automatically-generated)

options.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h \
		hash.h inet.h 

errwarn.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h \
		hash.h inet.h 

convert.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h \
		hash.h inet.h 

conflex.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h \
		hash.h inet.h dhctoken.h 

confpars.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h \
		hash.h inet.h dhctoken.h 

tree.o:		dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h \
		tree.h hash.h inet.h 

memory.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

alloc.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h \
		hash.h  inet.h 

print.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

hash.o:		dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

tables.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

inet.o:		dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

db.o:		dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h

dispatch.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h \
		hash.h inet.h 

bpf.o:		dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h includes/netinet/ip.h includes/netinet/udp.h \
		includes/netinet/if_ether.h 

packet.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h includes/netinet/ip.h includes/netinet/udp.h \
		includes/netinet/if_ether.h 

raw.o:		dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

nit.o:		dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

dhcpd.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

socket.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

dhcp.o:		dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 
bootp.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h 

dhclient.o:	dhcpd.h cdefs.h osdep.h site.h $(CF) dhcp.h tree.h hash.h \
		inet.h dhctoken.h