/* sample.h Sample config file for clients. This file is provided as a sample in case the system you want to run on is not currently supported. If that is the case, follow the Porting:: comments here and in other files as guides for what to change. Also, note that this file hasn't been updated in a lo-o-o-ong time, so it's probably worth looking at the config files for working ports as well. */ /* * Copyright (c) 2004-2017 by Internet Systems Consortium, Inc. ("ISC") * Copyright (c) 1996-2003 by Internet Software Consortium * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * Internet Systems Consortium, Inc. * 950 Charter Street * Redwood City, CA 94063 * * https://www.isc.org/ * */ /* Porting:: Some systems do not define basic integer types as shown below. On some systems, you need to include or . If you get parse errors in dhcpd.h while compiling dhcpd.conf, try including bitypes.h, and if that fails, use the hard-coded definitions shown below. */ #if 0 #include #endif #if 0 #define int8_t char #define int16_t short #define int32_t long #define u_int8_t unsigned char #define u_int16_t unsigned short #define u_int32_t unsigned long #endif #include /* Porting:: The jmp_buf type as declared in is sometimes a structure and sometimes an array. By default, we assume it's a structure. If it's an array on your system, you may get compile warnings or errors as a result in confpars.c. If so, try including the following definitions, which treat jmp_buf as an array: */ #if 0 #define jbp_decl(x) jmp_buf x #define jref(x) (x) #define jdref(x) (x) #define jrefproto jmp_buf #endif /* Porting:: Some older systems (e.g., Ultrix) still use the 4.2BSD-style syslog API. These differ from later versions of the syslog API in that the openlog system call takes two arguments instead of three, and the facility code (the third argument to modern versions of openlog()) is ORed into the log priority in the syslog() call. If you are running with the 4.2BSD-style syslog interface, define SYSLOG_4_2. */ /* #define SYSLOG_4_2 */ #include #include #include #include #include #include #include #include extern int h_errno; #include #include /* Porting:: Some older systems do not have defines for IP type-of-service, or don't define them the way we expect. If you get undefined symbol errors on the following symbols, they probably need to be defined here. */ #if 0 #define IPTOS_LOWDELAY 0x10 #define IPTOS_THROUGHPUT 0x08 #define IPTOS_RELIABILITY 0x04 #endif /* Porting:: Newer BSD derivatives store non-permanent daemon files in a directory called /var/run. If your system has a /var/run, use it; otherwise, use /etc. */ #ifndef _PATH_DHCPD_PID #define _PATH_DHCPD_PID "/etc/dhcpd.pid" #endif #ifndef _PATH_DHCPD6_PID #define _PATH_DHCPD6_PID "/etc/dhcpd6.pid" #endif #ifndef _PATH_DHCLIENT_PID #define _PATH_DHCLIENT_PID "/etc/dhclient.pid" #endif #ifndef _PATH_DHCLIENT6_PID #define _PATH_DHCLIENT6_PID "/etc/dhclient6.pid" #endif #ifndef _PATH_DHCRELAY_PID #define _PATH_DHCRELAY_PID "/etc/dhcrelay.pid" #endif /* Porting:: If your system supports standard ANSI C, it should provide the file /usr/include/stdarg.h. This contains the ANSI standard declarations for functions which take a variable number of arguments. Older systems with non-ANSI compilers cannot support this interface, and generally use the older varargs interface, defined in . Some systems only support varargs, but define the interface in anyway. You must choose one of the two sets of definitions below. Try stdarg.h first, unless you know it won't work. If you have trouble compiling errwarn.c, try switching to the varargs.h definitions. If that fails, try using stdarg.h with the varargs definitions. */ #if 0 /* Stdarg definitions for ANSI-compliant C compilers. */ #include #define VA_DOTDOTDOT ... #define VA_start(list, last) va_start (list, last) #define va_dcl #endif #if 0 /* Varargs definitions, for non-ANSI-compliant C compilers. */ #include #define VA_DOTDOTDOT va_alist #define VA_start(list, last) va_start (list) #endif /* Porting:: Some systems (notably 4.4BSD derivatives) support versions of the sprintf functions which will deposit a limited number of characters into the buffer; that limit is provided in an extra argument. If your system doesn't support this functionality, you must include the definition below for a dhcp-distribution-local version to be built and used: */ #if 0 #define NO_SNPRINTF #endif /* Porting:: Some systems provide a function, strerror(), which takes the unix error number (see errno) and returns a pointer to a static buffer containing the corresponding error message. If your system doesn't provide strerror(), define NO_STRERROR as shown below: */ #if 0 #define NO_STRERROR char *strerror (int); #endif /* Porting:: Once dhcpd has initialized itself, it loops forever waiting for packets to come in. Since we need to support multiple input streams in order to support multiple interfaces, dhcpd needs to be able to do a syscall to determine which descriptors have input waiting on them. Normally, dhcpd uses the select() system call, which is a 4.2BSD syscall invented precisely for this purpose. Unfortunately, some System V-based systems do not support select() properly when it operates on streams. The System V interface which does (largely) the same thing as select is called poll(). In some cases, this may work better than select() - if you find that dhcpd is hanging and not responding to packets very consistently, you might try defining USE_POLL and including . */ #if 0 #define USE_POLL #include #endif /* Porting:: You must define the default network API for your port. This will depend on whether one of the existing APIs will work for you, or whether you need to implement support for a new API. Currently, the following APIs are supported: The BSD socket API: define USE_SOCKETS. The Berkeley Packet Filter: define USE_BPF. The Streams Network Interface Tap (NIT): define USE_NIT. Raw sockets: define USE_RAW_SOCKETS If your system supports the BSD socket API and doesn't provide one of the supported interfaces to the physical packet layer, you can either provide support for the low-level API that your system does support (if any) or just use the BSD socket interface. The BSD socket interface doesn't support multiple network interfaces, and on many systems, it does not support the all-ones broadcast address, which can cause problems with some DHCP clients (e.g. Microsoft Windows 95). */ #if defined (USE_DEFAULT_NETWORK) # define USE_SOCKETS #endif /* Porting:: Recent versions of BSD added a new element to the sockaddr structure: sa_len. This indicates the length of the structure, and is used in a variety of places, not the least of which is the SIOCGIFCONF ioctl, which is used to figure out what interfaces are attached to the system. You should be able to determine if your system has an sa_len element by looking at the struct sockaddr definition in /usr/include/sys/socket.h. If it does, you must define HAVE_SA_LEN. Otherwise, you must not. The most obvious symptom that you've got this wrong is either a compile error complaining about the use of the sa_len structure element, or the failure of dhcpd to find any interfaces. */ /* #define HAVE_SA_LEN */ /* Every operating system has its own way of separating lines in a sequential text file. Most modern systems use a single character, either an ASCII Newline (10) or an ASCII Carriage Return (13). The most notable exception is MS-DOS (and consequently, Windows), which uses an ASCII Carriage Return followed by a Newline to separate each line. Fortunately, MS-DOS C compiler libraries typically hide this from the programmer, returning just a Newline. Define EOL to be whatever getc() returns for a newline. */ #define EOL '\n' /* Some older C compilers don't support the void pointer type. ANSI C defines void * to be a pointer type that matches any other pointer type. This is handy for returning a pointer which will always need to be cast to a different value. For example, malloc() on an ANSI C-compliant system returns void *. If your compiler doesn't support void pointers, you may need to define VOIDPTR to be char *; otherwise, define it to be void *. */ #define VOIDPTR void * /* Porting:: The following definitions for time should work on any unix machine. They may not work (or at least, may not work well) on a variety of non-unix machines. If you are porting to a non-unix machine, you probably need to change the definitions below and perhaps include different headers. I should note that dhcpd is not yet entirely clean of unix-specific time references, so the list of defines shown below probably isn't good enough if you're porting to a system that really doesn't support unix time. It's probably a reasonable place to start, though. */ #include #define TIME time_t #define GET_TIME(x) time ((x))