/* Site-specific definitions. For supported systems, you shouldn't need to make any changes here. However, you may want to, in order to deal with site-specific differences. */ /* Add any site-specific definitions and inclusions here... */ /* #include */ /* #define SITE_FOOBAR */ /* Define this if you don't want dhcpd to run as a daemon and do want to see all its output printed to stdout instead of being logged via syslog(). This also makes dhcpd use the dhcpd.conf in its working directory and write the dhcpd.leases file there. */ /* #define DEBUG */ /* Define this to see what the parser is parsing. You probably don't want to see this. */ /* #define DEBUG_TOKENS */ /* Define this to see dumps of incoming and outgoing packets. This slows things down quite a bit... */ /* #define DEBUG_PACKET */ /* Define this if you want to see dumps of expression evaluation. */ /* #define DEBUG_EXPRESSIONS */ /* Define this if you want to see dumps of find_lease() in action. */ /* #define DEBUG_FIND_LEASE */ /* Define this if you want to see dumps of parsed expressions. */ /* #define DEBUG_EXPRESSION_PARSE */ /* Define this if you want to watch the class matching process. */ /* #define DEBUG_CLASS_MATCHING */ /* Define this if you want to track memory usage for the purpose of noticing memory leaks quickly. */ /* #define DEBUG_MEMORY_LEAKAGE */ /* #define DEBUG_MEMORY_LEAKAGE_ON_EXIT */ /* Define this if you want exhaustive (and very slow) checking of the malloc pool for corruption. */ /* #define DEBUG_MALLOC_POOL */ /* Define this if you want to see a message every time a lease's state changes. */ /* #define DEBUG_LEASE_STATE_TRANSITIONS */ /* Define this if you want to maintain a history of the last N operations that changed reference counts on objects. This can be used to debug cases where an object is dereferenced too often, or not often enough. */ /* #define DEBUG_RC_HISTORY */ /* Define this if you want to see the history every cycle. */ /* #define DEBUG_RC_HISTORY_EXHAUSTIVELY */ /* This is the number of history entries to maintain - by default, 256. */ /* #define RC_HISTORY_MAX 10240 */ /* Define this if you want dhcpd to dump core when a non-fatal memory allocation error is detected (i.e., something that would cause a memory leak rather than a memory smash). */ /* #define POINTER_DEBUG */ /* Define this if you want debugging output for DHCP failover protocol messages. */ /* #define DEBUG_FAILOVER_MESSAGES */ /* Define this to include contact messages in failover message debugging. The contact messages are sent once per second, so this can generate a lot of log entries. */ /* #define DEBUG_FAILOVER_CONTACT_MESSAGES */ /* Define this if you want debugging output for DHCP failover protocol event timeout timing. */ /* #define DEBUG_FAILOVER_TIMING */ /* Define this if you want to include contact message timing, which is performed once per second and can generate a lot of log entries. */ /* #define DEBUG_FAILOVER_CONTACT_TIMING */ /* Define this if you want all leases written to the lease file, even if they are free leases that have never been used. */ /* #define DEBUG_DUMP_ALL_LEASES */ /* Define this if you want to see the requests and replies between the DHCP code and the DNS library code. */ /* #define DEBUG_DNS_UPDATES */ /* Define this if you want to debug the host part of the inform processing */ /* #define DEBUG_INFORM_HOST */ /* Define this if you want to debug the binary leases (lease_chain) code */ /* #define DEBUG_BINARY_LEASES */ /* Define this if you want to debug checksum calculations */ /* #define DEBUG_CHECKSUM */ /* Define this if you want to verbosely debug checksum calculations */ /* #define DEBUG_CHECKSUM_VERBOSE */ /* Define this if you want DHCP failover protocol support in the DHCP server. */ /* #define FAILOVER_PROTOCOL */ /* Define this if you want DNS update functionality to be available. */ #define NSUPDATE /* Define this if you want to enable the DHCP server attempting to find a nameserver to use for DDNS updates. */ #define DNS_ZONE_LOOKUP /* Define this if you want the dhcpd.pid file to go somewhere other than the default (which varies from system to system, but is usually either /etc or /var/run. */ /* #define _PATH_DHCPD_PID "/var/run/dhcpd.pid" */ /* Define this if you want the dhcpd.leases file (the dynamic lease database) to go somewhere other than the default location, which is normally /etc/dhcpd.leases. */ /* #define _PATH_DHCPD_DB "/etc/dhcpd.leases" */ /* Define this if you want the dhcpd.conf file to go somewhere other than the default location. By default, it goes in /etc/dhcpd.conf. */ /* #define _PATH_DHCPD_CONF "/etc/dhcpd.conf" */ /* Network API definitions. You do not need to choose one of these - if you don't choose, one will be chosen for you in your system's config header. DON'T MESS WITH THIS UNLESS YOU KNOW WHAT YOU'RE DOING!!! */ /* Define USE_SOCKETS to use the standard BSD socket API. On many systems, the BSD socket API does not provide the ability to send packets to the 255.255.255.255 broadcast address, which can prevent some clients (e.g., Win95) from seeing replies. This is not a problem on Solaris. In addition, the BSD socket API will not work when more than one network interface is configured on the server. However, the BSD socket API is about as efficient as you can get, so if the aforementioned problems do not matter to you, or if no other API is supported for your system, you may want to go with it. */ /* #define USE_SOCKETS */ /* Define this to use the Sun Streams NIT API. The Sun Streams NIT API is only supported on SunOS 4.x releases. */ /* #define USE_NIT */ /* Define this to use the Berkeley Packet Filter API. The BPF API is available on all 4.4-BSD derivatives, including NetBSD, FreeBSD and BSDI's BSD/OS. It's also available on DEC Alpha OSF/1 in a compatibility mode supported by the Alpha OSF/1 packetfilter interface. */ /* #define USE_BPF */ /* Define this to use the raw socket API. The raw socket API is provided on many BSD derivatives, and provides a way to send out raw IP packets. It is only supported for sending packets - packets must be received with the regular socket API. This code is experimental - I've never gotten it to actually transmit a packet to the 255.255.255.255 broadcast address - so use it at your own risk. */ /* #define USE_RAW_SOCKETS */ /* Define this to keep the old program name (e.g., "dhcpd" for the DHCP server) in place of the (base) name the program was invoked with. */ /* #define OLD_LOG_NAME */ /* Define this to change the logging facility used by dhcpd. */ /* #define DHCPD_LOG_FACILITY LOG_DAEMON */ /* Define this if you want to be able to execute external commands during conditional evaluation. */ /* #define ENABLE_EXECUTE */ /* Define this if you aren't debugging and you want to save memory (potentially a _lot_ of memory) by allocating leases in chunks rather than one at a time. */ #define COMPACT_LEASES /* Define this if you want to be able to save and playback server operational traces. */ /* #define TRACING */ /* Define this if you want the server to use the previous behavior when determining the DDNS TTL. If the user has specified a ddns-ttl option that is used to detemine the ttl. (If the user specifies an option that references the lease structure it is only usable for v4. In that case v6 will use the default.) Otherwise when defined the defaults are: v4 - 1/2 the lease time, v6 - DEFAULT_DDNS_TTL. When undefined the defaults are 1/2 the (preferred) lease time for both but with a cap on the maximum. */ /* #define USE_OLD_DDNS_TTL */ /* Define this if you want a DHCPv6 server to send replies to the source port of the message it received. This is useful for testing but is only included for backwards compatibility. */ /* #define REPLY_TO_SOURCE_PORT */ /* Define this if you want to enable strict checks in DNS Updates mechanism. Do not enable this unless are DHCP developer. */ /* #define DNS_UPDATES_MEMORY_CHECKS */ /* Define this if you want to allow domain list in domain-name option. RFC2132 does not allow that behavior, but it is somewhat used due to historic reasons. Note that it may be removed some time in the future. */ #define ACCEPT_LIST_IN_DOMAIN_NAME /* In previous versions of the code when the server generates a NAK it doesn't attempt to determine if the configuration included a server ID for that client. Defining this option causes the server to make a modest effort to determine the server id when building a NAK as a response. This effort will only check the first subnet and pool associated with a shared subnet and will not check for host declarations. With some configurations the server id computed for a NAK may not match that computed for an ACK. */ #define SERVER_ID_FOR_NAK /* NOTE: SERVER_ID_CHECK switch has been removed. Enabling server id * checking is now done via the server-id-check statement. Please refer * to the dhcpd manpage (server/dhcpd.conf.5) */ /* Include code to do a slow transition of DDNS records from the interim to the standard version, or backwards. The normal code will handle removing an old style record when the name on a lease is being changed. This adds code to handle the case where the name isn't being changed but the old record should be removed to allow a new record to be added. This is the slow transition as leases are only updated as a client touches them. A fast transition would entail updating all the records at once, probably at start up. */ #define DDNS_UPDATE_SLOW_TRANSITION /* Define the default prefix length passed from the client to the script when modifying an IPv6 IA_NA or IA_TA address. The two most useful values are 128 which is what the current specifications call for or 64 which is what has been used in the past. For most OSes 128 will indicate that the address is a host address and doesn't include any on-link information. 64 indicates that the first 64 bits are the subnet or on-link prefix. */ #define DHCLIENT_DEFAULT_PREFIX_LEN 128 /* Enable the gentle shutdown signal handling. Currently this means that on SIGINT or SIGTERM a client will release its address and a server in a failover pair will go through partner down. Both of which can be undesireable in some situations. We plan to revisit this feature and may make non-backwards compatible changes including the removal of this define. Use at your own risk. */ /* #define ENABLE_GENTLE_SHUTDOWN */ /* Include old error codes. This is provided in case you are building an external program similar to omshell for which you need the ISC_R_* error codes. You should switch to DHCP_R_* error codes for those that have been defined (see includes/omapip/result.h). The extra defines and this option will be removed at some time. */ /* #define INCLUDE_OLD_DHCP_ISC_ERROR_CODES */ /* Use the older factors for scoring a lease in the v6 client code. The new factors cause the client to choose more bindings (IAs) over more addresse within a binding. Most uses will get a single address in a single binding and only get an adverstise from a single server and there won't be a difference. */ /* #define USE_ORIGINAL_CLIENT_LEASE_WEIGHTS */ /* Print out specific error messages for dhclient, dhcpd or dhcrelay when processing an incorrect command line. This is included for those that might require the exact error messages, as we don't expect that is necessary it is on by default. */ #define PRINT_SPECIFIC_CL_ERRORS /* Limit the value of a file descriptor the serve will use when accepting a connecting request. This can be used to limit the number of TCP connections that the server will allow at one time. A value of 0 means there is no limit.*/ #define MAX_FD_VALUE 200 /* Enable EUI-64 Address assignment policy. Instructs the server * to use EUI-64 addressing instead of dynamic address allocation * for IA_NA pools, if the parameter use-eui-64 is true for the * pool. Can be at all scopes down to the pool level. Not * supported by the configure script. */ /* #define EUI_64 */ /* Enable enforcement of the require option statement as documented * in man page. Instructs the dhclient, when in -6 mode, to discard * offered leases that do not contain all options specified as required * in the client's configuration file. The client already enforces this * in -4 mode. */ #define ENFORCE_DHCPV6_CLIENT_REQUIRE /* Enable the invocation of the client script with a FAIL state code * by dhclient when running in one-try mode (-T) and the attempt to * obtain the desired lease(s) fails. Applies to IPv4 mode only. */ /* #define CALL_SCRIPT_ON_ONETRY_FAIL */ /* Include definitions for various options. In general these should be left as is, but if you have already defined one of these and prefer your definition you can comment the RFC define out to avoid conflicts */ #define RFC2563_OPTIONS #define RFC2937_OPTIONS #define RFC4776_OPTIONS #define RFC4578_OPTIONS #define RFC4833_OPTIONS #define RFC4994_OPTIONS #define RFC5071_OPTIONS #define RFC5192_OPTIONS #define RFC5223_OPTIONS #define RFC5417_OPTIONS #define RFC5460_OPTIONS #define RFC5859_OPTIONS #define RFC5969_OPTIONS #define RFC5970_OPTIONS #define RFC5986_OPTIONS #define RFC6011_OPTIONS #define RFC6011_OPTIONS #define RFC6153_OPTIONS #define RFC6334_OPTIONS #define RFC6440_OPTIONS #define RFC6731_OPTIONS #define RFC6939_OPTIONS #define RFC6977_OPTIONS #define RFC7083_OPTIONS #define RFC7341_OPTIONS #define RFC7618_OPTIONS #define RFC7710_OPTIONS #define RFC8925_OPTIONS