/* SPDX-License-Identifier: MIT */
/*
 * Copyright © 2013 Red Hat, Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to
 * deal in the Software without restriction, including without limitation the
 * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
 * sell copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 */

#ifndef LIBEVDEV_UINPUT_H
#define LIBEVDEV_UINPUT_H

#ifdef __cplusplus
extern "C" {
#endif

#include <libevdev/libevdev.h>

struct libevdev_uinput;

/**
 * @defgroup uinput uinput device creation
 *
 * Creation of uinput devices based on existing libevdev devices. These functions
 * help to create uinput devices that emulate libevdev devices. In the simplest
 * form it serves to duplicate an existing device:
 *
 * @code
 * int err;
 * int fd, uifd;
 * struct libevdev *dev;
 * struct libevdev_uinput *uidev;
 *
 * fd = open("/dev/input/event0", O_RDONLY);
 * if (fd < 0)
 *     return -errno;
 *
 * err = libevdev_new_from_fd(fd, &dev);
 * if (err != 0)
 *     return err;
 *
 * uifd = open("/dev/uinput", O_RDWR);
 * if (uifd < 0)
 *     return -errno;
 *
 * err = libevdev_uinput_create_from_device(dev, uifd, &uidev);
 * if (err != 0)
 *     return err;
 *
 * // post a REL_X event
 * err = libevdev_uinput_write_event(uidev, EV_REL, REL_X, -1);
 * if (err != 0)
 *     return err;
 * err = libevdev_uinput_write_event(uidev, EV_SYN, SYN_REPORT, 0);
 * if (err != 0)
 *     return err;
 *
 * libevdev_uinput_destroy(uidev);
 * libevdev_free(dev);
 * close(uifd);
 * close(fd);
 *
 * @endcode
 *
 * Alternatively, a device can be constructed from scratch:
 *
 * @code
 * int err;
 * struct libevdev *dev;
 * struct libevdev_uinput *uidev;
 *
 * dev = libevdev_new();
 * libevdev_set_name(dev, "test device");
 * libevdev_enable_event_type(dev, EV_REL);
 * libevdev_enable_event_code(dev, EV_REL, REL_X, NULL);
 * libevdev_enable_event_code(dev, EV_REL, REL_Y, NULL);
 * libevdev_enable_event_type(dev, EV_KEY);
 * libevdev_enable_event_code(dev, EV_KEY, BTN_LEFT, NULL);
 * libevdev_enable_event_code(dev, EV_KEY, BTN_MIDDLE, NULL);
 * libevdev_enable_event_code(dev, EV_KEY, BTN_RIGHT, NULL);
 *
 * err = libevdev_uinput_create_from_device(dev,
 *                                          LIBEVDEV_UINPUT_OPEN_MANAGED,
 *                                          &uidev);
 * if (err != 0)
 *     return err;
 *
 * // ... do something ...
 *
 * libevdev_uinput_destroy(uidev);
 *
 * @endcode
 */

enum libevdev_uinput_open_mode {
	/* intentionally -2 to avoid code like below from accidentally working:
		fd = open("/dev/uinput", O_RDWR); // fails, fd is -1
		libevdev_uinput_create_from_device(dev, fd, &uidev); // may hide the error */
	LIBEVDEV_UINPUT_OPEN_MANAGED = -2  /**< let libevdev open and close @c /dev/uinput */
};

/**
 * @ingroup uinput
 *
 * Create a uinput device based on the given libevdev device. The uinput device
 * will be an exact copy of the libevdev device, minus the bits that uinput doesn't
 * allow to be set.
 *
 * If uinput_fd is @ref LIBEVDEV_UINPUT_OPEN_MANAGED, libevdev_uinput_create_from_device()
 * will open @c /dev/uinput in read/write mode and manage the file descriptor.
 * Otherwise, uinput_fd must be opened by the caller and opened with the
 * appropriate permissions.
 *
 * The device's lifetime is tied to the uinput file descriptor, closing it will
 * destroy the uinput device. You should call libevdev_uinput_destroy() before
 * closing the file descriptor to free allocated resources.
 * A file descriptor can only create one uinput device at a time; the second device
 * will fail with -EINVAL.
 *
 * You don't need to keep the file descriptor variable around,
 * libevdev_uinput_get_fd() will return it when needed.
 *
 * @note Due to limitations in the uinput kernel module, REP_DELAY and
 * REP_PERIOD will default to the kernel defaults, not to the ones set in the
 * source device.
 *
 * @note On FreeBSD, if the UI_GET_SYSNAME ioctl() fails, there is no other way
 * to get a device, and the function call will fail.
 *
 * @param dev The device to duplicate
 * @param uinput_fd @ref LIBEVDEV_UINPUT_OPEN_MANAGED or a file descriptor to @c /dev/uinput,
 * @param[out] uinput_dev The newly created libevdev device.
 *
 * @return 0 on success or a negative errno on failure. On failure, the value of
 * uinput_dev is unmodified.
 *
 * @see libevdev_uinput_destroy
 */
int libevdev_uinput_create_from_device(const struct libevdev *dev,
				       int uinput_fd,
				       struct libevdev_uinput **uinput_dev);

/**
 * @ingroup uinput
 *
 * Destroy a previously created uinput device and free associated memory.
 *
 * If the device was opened with @ref LIBEVDEV_UINPUT_OPEN_MANAGED,
 * libevdev_uinput_destroy() also closes the file descriptor. Otherwise, the
 * fd is left as-is and must be closed by the caller.
 *
 * @param uinput_dev A previously created uinput device.
 */
void libevdev_uinput_destroy(struct libevdev_uinput *uinput_dev);

/**
 * @ingroup uinput
 *
 * Return the file descriptor used to create this uinput device. This is the
 * fd pointing to <strong>/dev/uinput</strong>. This file descriptor may be used to write
 * events that are emitted by the uinput device.
 * Closing this file descriptor will destroy the uinput device, you should
 * call libevdev_uinput_destroy() first to free allocated resources.
 *
 * @param uinput_dev A previously created uinput device.
 *
 * @return The file descriptor used to create this device
 */
int libevdev_uinput_get_fd(const struct libevdev_uinput *uinput_dev);

/**
 * @ingroup uinput
 *
 * Return the syspath representing this uinput device. If the UI_GET_SYSNAME
 * ioctl is not available, libevdev makes an educated guess.
 * The UI_GET_SYSNAME ioctl is available since Linux 3.15.
 *
 * The syspath returned is the one of the input node itself
 * (e.g. /sys/devices/virtual/input/input123), not the syspath of the device
 * node returned with libevdev_uinput_get_devnode().
 *
 * @note This function may return NULL if UI_GET_SYSNAME is not available.
 * In that case, libevdev uses ctime and the device name to guess devices.
 * To avoid false positives, wait at least 1.5s between creating devices that
 * have the same name.
 *
 * @note FreeBSD does not have sysfs, on FreeBSD this function always returns
 * NULL.
 *
 * @param uinput_dev A previously created uinput device.
 * @return The syspath for this device, including the preceding /sys
 *
 * @see libevdev_uinput_get_devnode
 */
const char* libevdev_uinput_get_syspath(struct libevdev_uinput *uinput_dev);

/**
 * @ingroup uinput
 *
 * Return the device node representing this uinput device.
 *
 * This relies on libevdev_uinput_get_syspath() to provide a valid syspath.
 * See libevdev_uinput_get_syspath() for more details.
 *
 * @note This function may return NULL. libevdev may have to guess the
 * syspath and the device node. See libevdev_uinput_get_syspath() for details.
 *
 * @note On FreeBSD, this function can not return NULL. libudev uses the
 * UI_GET_SYSNAME ioctl to get the device node on this platform and if that
 * fails, the call to libevdev_uinput_create_from_device() fails.
 *
 * @param uinput_dev A previously created uinput device.
 * @return The device node for this device, in the form of /dev/input/eventN
 *
 * @see libevdev_uinput_get_syspath
 */
const char* libevdev_uinput_get_devnode(struct libevdev_uinput *uinput_dev);

/**
 * @ingroup uinput
 *
 * Post an event through the uinput device. It is the caller's responsibility
 * that any event sequence is terminated with an EV_SYN/SYN_REPORT/0 event.
 * Otherwise, listeners on the device node will not see the events until the
 * next EV_SYN event is posted.
 *
 * @param uinput_dev A previously created uinput device.
 * @param type Event type (EV_ABS, EV_REL, etc.)
 * @param code Event code (ABS_X, REL_Y, etc.)
 * @param value The event value
 * @return 0 on success or a negative errno on error
 */
int libevdev_uinput_write_event(const struct libevdev_uinput *uinput_dev,
				unsigned int type,
				unsigned int code,
				int value);
#ifdef __cplusplus
}
#endif

#endif /* LIBEVDEV_UINPUT_H */