What's New In Libevent 2.0 so far: 1. About this document This document describes the key differences between Libevent 1.4 and Libevent 2.0, from a user's point of view. It was most recently updated based on features in subversion trunk as of 18 November 2009. NOTE 1: If any features or fixes get backported from trunk to 1.4, they should get moved from here into whatsnew-14.txt, since they will no longer be differences between 1.4 and this version. NOTE 2: We may have missed some things on this list. Caveat haxxor. 2. New and Improved Event APIs Many APIs are improved, refactored, or deprecated in Libevent 2.0. COMPATIBILITY: Nearly all existing code that worked with should Libevent 1.4 should still work correctly with Libevent 2.0. However, if you are writing new code, or if you want to port old code, we strongly recommend using the new APIs and avoiding deprecated APIs as much as possible. Binaries linked against Libevent 1.4 will need to be recompiled to link against Libevent 2.0. This is nothing new; we have never been good at preserving binary compatibility between releases. We'll try harder in the future, though: see 2.1 below. 2.1. New header layout for improved compatibility Libevent 2.0 has a new header layout to make it easier for programmers to write good, well-supported libevent code. The new headers are divided into three types. There are *regular headers*, like event2/event.h. These headers contain the functions that most programmers will want to use. There are *backward compatibility headers*, like event2/event_compat.h. These headers contain declarations for deprecated functions from older versions of Libevent. Documentation in these headers should suggest what's wrong with the old functions, and what functions you want to start using instead of the old ones. Some of these functions might be removed in a future release. New programs should generally not include these headers. Finally, there are *structure headers*, like event2/event_struct.h. These headers contain definitions of some structures that Libevent has historically exposed. Exposing them caused problems in the past, since programs that were compiled to work with one version of Libevent would often stop working with another version that changed the size or layout of some object. We've moving them into separate headers so that programmers can know that their code is not depending on any unstable aspect of the Libvent ABI. New programs should generally not include these headers unless they really know what they are doing, and are willing to rebuild their software whenever they want to link it against a new version of libevent. Functionality that once was located in event.h is now more subdivided. The core event logic is now in event2/event.h. The "evbuffer" functions for low-level buffer manipulation are in event2/buffer.h. The "bufferevent" functions for higher-level buffered IO are in event2/bufferevent.h. COMPATIBILITY: All of the old headers (event.h, evdns.h, evhttp.h, evrpc.h, and evutil.h) will continue to work by including the corresponding new headers. Old code should not be broken by this change. 2.2. New thread-safe, binary-compatibile APIs Some aspects of the historical Libevent API have encouraged non-threadsafe code, or forced code built against one version of Libevent to no longer build with another. The problems with now-deprecated APIs fell into two categories: 1) Dependence on the "current" event_base. In an application with multiple event_bases, Libevent previously had a notion of the "current" event_base. New events were linked to this base, and the caller needed to explicitly reattach them to another base. This was horribly error-prone. Functions like "event_set" that worked with the "current" event_base are now deprecated but still available (see 2.1). There are new functions like "event_assign" that take an explicit event_base argument when setting up a structure. Using these functions will help prevent errors in your applications, and to be more threadsafe. 2) Structure dependence. Applications needed to allocate 'struct event' themselves, since there was no function in Libevent to do it for them. But since the size and contents of struct event can change between libevent versions, this created binary-compatibility nightmares. All structures of this kind are now isolated in _struct.h header (see 2.1), and there are new allocate-and- initialize functions you can use instead of the old initialize-only functions. For example, instead of malloc and event_set, you can use event_new(). (For people who do really want to allocate a struct event on the stack, or put one inside another structure, you can still use event2/event_compat.h.) So in the case where old code would look like this: #include ... struct event *ev = malloc(sizeof(struct event)); /* This call will cause a stack overrun if you compile with one version of libevent and link dynamically against another. */ event_set(ev, fd, EV_READ, cb, NULL); /* If you forget this call, your code will break in hard-to-diagnose ways in the presence of multiple event bases. */ event_set_base(ev, base); New code will look more like this: #include ... struct event *ev; ev = event_new(base, fd, EV_READ, cb, NULL); 2.3. Overrideable allocation functions If you want to override the allocation functions used by libevent (for example, to use a specialized allocator, or debug memory issues, or so on), you can replace them by calling event_set_mem_functions. It takes replacements for malloc(), free(), and realloc(). If you're going to use this facility, you need to call it _before_ Libevent does any memory allocation; otherwise, Libevent may allocate some memory with malloc(), and free it with the free() function you provide. You can disable this feature when you are building Libevent by passing the --disable-malloc-replacement argument to configure. 2.4. Configurable event_base creation Older versions of Libevent would always got the fastest backend available, unless you reconfigured their behavior with the environment variables EVENT_NOSELECT, EVENT_NOPOLL, and so forth. This was annoying to programmers who wanted to pick a backend explicitly without messing with the environment. Also, despite our best efforts, not every backend supports every operation we might like. Some features (like edge-triggered events, or working with non-socket file descriptors) only work with some operating systems' fast backends. Previously, programmers who cared about this needed to know which backends supported what. This tended to get quite ungainly. There is now an API to choose backends, either by name or by feature. Here is an example: struct event_config_t *config; struct event_base *base; /* Create a new configuration object. */ config = event_config_new(); /* We don't want to use the "select" method. */ event_config_avoid_method(config, "select"); /* We want a method that can work with non-socket file descriptors */ event_config_require_features(config, EV_FEATURE_FDS); base = event_base_new_with_config(config); if (!base) { /* There is no backend method that does what we want. */ exit(1); } event_config_free(config); Supported features are documented in event2/event.h 2.5. Socket is now an abstract type All APIs that formerly accepted int as a socket type now accept "evutil_socket_t". On Unix, this is just an alias for "int" as before. On Windows, however, it's an alias for SOCKET, which can be wider than int on 64-bit platforms. 2.6. Timeouts and persistent events work together. Previously, it wasn't useful to set a timeout on a persistent event: the timeout would trigger once, and never again. This is not what applications tend to want. Instead, applications tend to want every triggering of the event to re-set the timeout. So now, if you set up an event like this: struct event *ev; struct timeval tv; ev = event_new(base, fd, EV_READ|EV_PERSIST, cb, NULL); tv.tv_sec = 1; tv.tv_usec = 0; event_add(ev, &tv); The callback 'cb' will be invoked whenever fd is ready to read, OR whenever a second has passed since the last invocation of cb. 2.7. Multiple events allowed per fd Older versions of Libevent allowed at most one EV_READ event and at most one EV_WRITE event per socket, per event base. This restriction is no longer present. 2.8. evthread_* functions for thread-safe structures. Libevent structures can now be built with locking support. You can enable this on a per-event-base level by writing functions to implement mutexes and thread IDs, and passing them to evthread_set_locking_callback and evthread_set_id_callback. This makes it safe to add, remove, and activate events on an event base from a different thread. If you want threading support and you're using pthreads, you can just call evthread_use_pthreads(). (You'll need to link against the libevent_pthreads library in addition to libevent_core. These functions are not in libevent_core.) If you want threading support and you're using Windows, you can just call evthread_use_windows_threads(). Once locking functions are enabled, every new event_base is created with a lock. You can prevent a single event_base from being built with a lock disabled by using the EVENT_BASE_FLAG_NOLOCK flag in its event_config. If an event_base is created with a lock, it is safe to call event_del, event_add, and event_active on its events from any thread. The event callbacks themselves are still all executed from the thread running the event loop. To make an evbuffer or a bufferevent object threadsafe, call its _enable_locking() function. The HTTP api is not currently threadsafe. To build Libevent with threading support disabled, pass --disable-thread-support to the configure script. 2.9. Edge-triggered events on some backends. With some backends, it's now possible to add the EV_ET flag to an event in order to request that the event's semantics be edge-triggered. Right now, epoll and kqueue support this. The corresponding event_config feature is EV_FEATURE_ET; see 2.4 for more information. 3. Backend-specific improvements. 3.1. kqueue event ordering consistency TODO(niels) 3.2. Improved notification on Linux When we need to wake the event loop up from another thread, we use an epollfd to do so, instead of a socketpair. This is supposed to be faster. 4. Improvements to evbuffers Libevent has long had an "evbuffer" implementation to wrap access to an input or output memory buffer. In previous versions, the implementation was very inefficient and lacked some desirable features. We've made many improvements in Libevent 2.0. 4.1. Chunked-memory internal representation Previously, each evbuffer was a huge chunk of memory. When we ran out of space in an evbuffer, we used realloc() to grow the chunk of memory. When data was misaligned, we used memmove to move the data back to the front of the buffer. Needless to say, this is a terrible interface for networked IO. Now, evbuffers are implemented as a linked list of memory chunks, like most Unix kernels use for network IO. Data is added at the end of the linked list and removed from the front, so that we don't ever need realloc huge chunks or memmove the whole buffer contents. To avoid multiple calls to read and write, we use the readv/writev interfaces (or WSASend/WSARecv on Windows) to do IO on multiple chunks at once with a single system call. COMPATIBILITY NOTE: The evbuffer struct is no longer exposed in a header. The code here is too volatile to expose an official evbuffer structure, and there was never any means provided to create an evbuffer except via evbuffer_new which heap-allocated the buffer. If you need access to the whole bufer as a linear chunk of memory, the EVBUFFER_DATA() function still works. Watch out, though: it needs to copy the buffer's contents in a linear chunk before you can use it. 4.2. More flexible readline support The old evbuffer_readline() function (which accepted any sequence of CR and LF characters as a newline, and which couldn't handle lines containing NUL characters), is now deprecated. The preferred function is evbuffer_readln(), which supports a variety of line-ending styles, and which can return the number of characters in the line returned. You can also call evbuffer_search_eol() to find the end of a line in an evbuffer without ever extracting the line. 4.3. Support for file-based IO in evbuffers. You can now add chunks of a file into a evbuffer, and Libevent will have your OS use mapped-memory functionality, sendfile, or splice to transfer the data without ever copying it to userspace. On OSs where this is not supported, Libevent just loads the data. There are probably some bugs remaining in this code. On some platforms (like Windows), it just reads the relevant parts of the file into RAM. 4.4. Support for zero-copy writes in evbuffers. You can add a piece of memory to an evbuffer without copying it. Instead, Libevent adds a new element to the evbuffer's linked list of chunks with a pointer to the memory you supplied. You can do this either with a reference-counted chunk (via evbuffer_add_reference), or by asking Libevent for a pointer to its internal vectors (via evbuffer_reserve_space or evbuffer_peek()). 4.5. Multiple callbacks per evbuffer Previously, you could only have one callback active on an evbuffer at a time. In practice, this meant that if one part of Libevent was using an evbuffer callback to notice when an internal evbuffer was reading or writing data, you couldn't have your own callback on that evbuffer. Now, you can now use the evbuffer_add_cb() function to add a callback that does not interfere with any other callbacks. The evbuffer_setcb() function is now deprecated. 4.6. New callback interface Previously, evbuffer callbacks were invoked with the old size of the buffer and the new size of the buffer. This interface could not capture operations that simultaneously filled _and_ drained a buffer, or handle cases where we needed to postpone callbacks until multiple operations were complete. Callbacks that are set with evbuffer_setcb still use the old API. Callbacks added with evbuffer_add_cb() use a new interface that takes a pointer to a struct holding the total number of bytes drained read and the total number of bytes written. See event2/buffer.h for full details. 4.7. Misc new evbuffer features You can use evbuffer_remove() to move a given number of bytes from one buffer to another. The evbuffer_search() function lets you search for repeated instances of a pattern inside an evbuffer. You can use evbuffer_freeze() to temporarily suspend drains from or adds to a given evbuffer. This is useful for code that exposes an evbuffer as part of its public API, but wants users to treat it as a pure source or sink. You can have an evbuffer defer all of its callbacks, so that rather than being invoked immediately when the evbuffer's length changes, they are invoked from within the event_loop. This is useful when you have a complex set of callbacks that can change the length of other evbuffers, and you want to avoid having them recurse and overflow your stack. 5. Bufferevents improvements Libevent has long included a "bufferevents" structure and related functions that were useful for generic buffered IO on a TCP connection. This is what Libevent uses for its HTTP implementation. In addition to the improvements that they get for free from the underlying evbuffer implementation above, there are many new features in Libevent 2.0's evbuffers. 5.1. New OO implementations The "bufferevent" structure is now an abstract base type with multiple implementations. This should not break existing code, which always allocated bufferevents with bufferevent_new(). Current implementations of the bufferevent interface are described below. See also section TODO(nickm). 5.2. bufferevent_socket_new() replaces bufferevent_new() Since bufferevents that use a socket are not the only kind, bufferevent_new() is now deprecated. Use bufferevent_socket_new() instead. 5.3. Filtered bufferevent IO You can use bufferevent_filter_new() to create a bufferevent that wraps around another bufferevent and transforms data it is sending and receiving. See test/regress_zlib.c for a toy example that uses zlib to compress data before sending it over a bufferevent. 5.3. Linked pairs of bufferevents You can use bufferevent_pair_new() to produce two linked bufferevents. This is like using socketpair, but doesn't require system-calls. 5.4. SSL support for bufferevents with OpenSSL There is now a bufferevent type that supports SSL/TLS using the OpenSSL library. The code for this is build in a separate library, libevent_openssl, so that your programs don't need to link against OpenSSL unless they actually want SSL support. There are two ways to construct one of these bufferevents, both declared in . If you want to wrap an SSL layer around an existing bufferevent, you would call the bufferevent_openssl_filter_new() function. If you want to do SSL on a socket directly, call bufferevent_openssl_socket_new(). This is tricky code; there are probably some bugs hiding here. 5.5. IOCP support for bufferevents on Windows There is now a bufferevents backend that supports IOCP on Windows. Supposedly, this will eventually make Windows IO much faster for programs using bufferevents. We'll have to see; the code is not currently optimized at all. To try it out, call the event_base_start_iocp() method on an event_base before contructing bufferevents. This is tricky code; there are probably some bugs hiding here. 5.6. Improved connect support for bufferevents. You can now create a bufferevent that is not yet connected to any host, and tell it to connect, either by address or by hostname. The functions to do this are bufferevent_socket_connect and bufferevent_socket_connect_hostname. 6. Extras improvements 6.1. DNS 6.1.1. IPv6 nameservers The evdns code now lets you have nameservers whose addresses are IPv6. 6.1.2: Support for the 0x20 hack 6.1.3: Better security. TODO(nickm) writeme 6.1.4. Getaddrinfo support There's now an asynchronous getaddrinfo clone, evdns_getaddrinfo(), to make the results of the evdns functions more usable. It doesn't support every feature of a typical platform getaddrinfo() yet, but it is quite close. There is also a blocking evutil_getaddrinfo() declared in event2/util.h, to provide a getaddrinfo() implementation for platforms that don't have one, and smooth over the differences in various platforms implementations of RFC3493. 7. Infrastructure improvements 7.1. Better unit test framework We now use a unit test framework that Nick wrote called "tinytest". The main benefit from Libevent's point of view is that tests which might mess with global state can all run each in their own subprocess. This way, when there's a bug that makes one unit test crash or mess up global state, it doesn't affect any others. 7.2. Better unit tests Despite all the code we've added, our unit tests are much better than before. Right now, iterating over the different backends on various platforms, I'm getting between 78% and 81% test coverage, compared with less than 45% test coverage in Libevent 1.4.