2005-04-09 Marcus Meissner * pdc320.c: Check for both : and non : names in model detection. 2004-01-08 Marcus Meissner From Mark Slemko * dlink350f.c, dlink350f.h, pdc640.c: Orientation, byte order, and brightness correction for the D-Link 350F 2004-01-04 Marcus Meissner * pdc640.c: Use different names for Skanhex SX-35, or the lower level gets confused. 2003-12-28 Lutz Mueller * pdc640.c: Martin Sarfy reports that his camera (Trust 350FT PowerC@m FLASH, 0x6d6:0x2d) works using the driver for 0x6d6:0x2e. 2003-09-15 Marcus Meissner Reported by Andreas Kies: * pdc640.c: Remove :, since ability.mode again contains names without :, or we do not find our cameras. Use flip_both for UMAX AstraPix. 2003-05-15 Lutz Mueller Patch by Drew Sullivan : * pdc640.c: Correctly post-process images taken by a SiPix:Stylecam. 2003-05-13 Marcus Meissner * pdc640.c, jd350e.c, jd350e.h: Applied Trustcam 350FS fix from Hans de Goede 2003-04-26 Marcus Meissner * pdc640.c: compression type 1 appears to be just like compression type 2, at least for the SiPix Stylecam. 2003-04-17 Marcus Meissner * pdc640.c: Added SiPix StyleCam (0x0d64/0x1001), UMAX AstraPix 320s (same) and DLINK DSC-350F (0xd64/0x1021). 2003-03-02 Marcus Meissner * pdc640.c,jd350e.[ch]: Meade binocs need filter and flip vertical. Renamed rotate180 to flip_vertical. 2003-02-25 Marcus Meissner * pdc320.c,h: Rewritten the command/reply handling to a large degree after reverse engineering the windows driver. * pdc320.html: Started documenting the command structure. 2003-02-18 Marcus Meissner * pdc640.c: Added ScopeCam (www.meade.com). 2003-02-04 Marcus Meissner * pdc640.c: Skanhex-SX 35 IDs added, USB id for JD350 entrance added (from Joerg Hackenberg). 2003-01-30 Marcus Meissner * pdc640.c: Added support for Typhoon Stylocam, required some stability fixes for the USB communication. 2003-01-14 Marcus Meissner * pdc320.c, pdc640.c, pdc700.c: Translate some strings. 2002-11-17 Marcus Meissner * pdc700.c: Do not cast bween time_t* and int*. 2002-10-03 Lutz Müller * Makefile.am: -I$(top_builddir)/libgphoto2 2002-09-15 Marcus Meissner * pdc640.c: Added Jenoptik JD350v(ideo) USB support. 2002-03-22 Lutz Müller Patch by Andrea Suatoni : * pdc640.c: IRIX fixes. 2002-03-19 Greg Ingram * pdc700.c: Added pdc700_set_date() which appears to work. Is the date widget working completely? Added the ability to select image size (resolution). The configuration dialog was getting rather too tall so I split it up onto three sections (tabs). * pdc700.c: Fix off-by-one thinko in get_config where the camera's month datum is one-based but tm.tm_mon is zero-based. 2002-01-15 Lutz Müller * pdc700.c: Introduced a bug in last fix... 2002-01-15 Lutz Müller * pdc700.c: When status is PDC_STATUS_FAIL, the camera will only send the checksum, nothing else. 2002-01-13 Lutz Müller * pdc700.c: Remove references to gp_camera_set_error. 2002-01-09 Dan Fandrich * jd350e.c: Added definitions of MIN and MAX 2001-12-05 Lutz Müller * pdc640.c: Includes again :-) 2001-12-05 Lutz Müller * pdc320.h * pdc640.c: Still fixing includes 2001-12-05 Lutz Müller * pdc640.c: Fix includes. 2001-11-28 Lutz Müller * pdc700.c: Rename PDC700_FIRST into PDC700_FAIL. Try to implement some error recovery strategy.