/* * This file is part of the Nice GLib ICE library. * * (C) 2014 Collabora Ltd. * Contact: Philip Withnall * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is the Nice GLib ICE library. * * The Initial Developers of the Original Code are Collabora Ltd and Nokia * Corporation. All Rights Reserved. * * Contributors: * Philip Withnall, Collabora Ltd. * * Alternatively, the contents of this file may be used under the terms of the * the GNU Lesser General Public License Version 2.1 (the "LGPL"), in which * case the provisions of LGPL are applicable instead of those above. If you * wish to allow use of your version of this file only under the terms of the * LGPL and not to allow others to use your version of this file under the * MPL, indicate your decision by deleting the provisions above and replace * them with the notice and other provisions required by the LGPL. If you do * not delete the provisions above, a recipient may use your version of this * file under either the MPL or the LGPL. */ /** * This is a comprehensive unit test for send() and recv() behaviour in libnice, * covering all APIs except the old nice_agent_attach_recv() one. It aims to * test the correctness of reliable and non-reliable I/O through libnice, using * a variety of data and a variety of buffer sizes. * * Abnormal features like error handling, zero-length buffer handling, stream * closure and cancellation are not tested. * * This is *not* a performance test, and would require significant work to be * useful as one. It allocates all of its buffers dynamically, and walks over * them frequently to set and check data. * * Several of the strategies in the test make use of random numbers. The seed * values for these are deterministically set (in main()), but may be specified * on the command line to allow fuzzing. */ #ifdef HAVE_CONFIG_H # include #endif #include "agent.h" #include "test-io-stream-common.h" #include #include #ifndef G_OS_WIN32 #include #endif /* Maximum IP payload ((1 << 16) - 1), minus IP header, minus UDP header. */ #define MAX_MESSAGE_SIZE (65535 - 20 - 8) /* bytes */ typedef enum { STREAM_AGENT, /* nice_agent_[send|recv]() */ STREAM_AGENT_NONBLOCKING, /* nice_agent_[send|recv]_nonblocking() */ STREAM_GIO, /* Nice[Input|Output]Stream */ STREAM_GSOURCE, /* GPollable[Input|Output]Stream */ } StreamApi; #define STREAM_API_N_ELEMENTS (STREAM_GSOURCE + 1) typedef enum { BUFFER_SIZE_CONSTANT_LARGE, /* always 65535 bytes */ BUFFER_SIZE_CONSTANT_SMALL, /* always 4096 bytes */ BUFFER_SIZE_CONSTANT_TINY, /* always 1 byte */ BUFFER_SIZE_ASCENDING, /* ascending powers of 2 */ BUFFER_SIZE_RANDOM, /* random every time */ } BufferSizeStrategy; #define BUFFER_SIZE_STRATEGY_N_ELEMENTS (BUFFER_SIZE_RANDOM + 1) typedef enum { BUFFER_COUNT_CONSTANT_ONE, /* always a single buffer */ BUFFER_COUNT_CONSTANT_TWO, /* always two buffers */ BUFFER_COUNT_RANDOM, /* random every time */ } BufferCountStrategy; #define BUFFER_COUNT_STRATEGY_N_ELEMENTS (BUFFER_COUNT_RANDOM + 1) typedef enum { MESSAGE_COUNT_CONSTANT_ONE, /* always a single message */ MESSAGE_COUNT_CONSTANT_TWO, /* always two messages */ MESSAGE_COUNT_RANDOM, /* random every time */ } MessageCountStrategy; #define MESSAGE_COUNT_STRATEGY_N_ELEMENTS (MESSAGE_COUNT_RANDOM + 1) typedef enum { BUFFER_DATA_CONSTANT, /* fill with 0xfe */ BUFFER_DATA_ASCENDING, /* ascending values for each byte */ BUFFER_DATA_PSEUDO_RANDOM, /* every byte is pseudo-random */ } BufferDataStrategy; #define BUFFER_DATA_STRATEGY_N_ELEMENTS (BUFFER_DATA_PSEUDO_RANDOM + 1) typedef struct { /* Test configuration (immutable per test run). */ gboolean reliable; StreamApi stream_api; struct { BufferSizeStrategy buffer_size_strategy; BufferCountStrategy buffer_count_strategy; MessageCountStrategy message_count_strategy; } transmit; struct { BufferSizeStrategy buffer_size_strategy; BufferCountStrategy buffer_count_strategy; MessageCountStrategy message_count_strategy; } receive; BufferDataStrategy buffer_data_strategy; gsize n_bytes; guint n_messages; /* Test state. */ GRand *transmit_size_rand; GRand *receive_size_rand; gsize transmitted_bytes; gsize received_bytes; gsize *other_received_bytes; guint transmitted_messages; guint received_messages; guint *other_received_messages; } TestData; /* Whether @stream_api is blocking (vs. non-blocking). */ static gboolean stream_api_is_blocking (StreamApi stream_api) { switch (stream_api) { case STREAM_AGENT: case STREAM_GIO: return TRUE; case STREAM_AGENT_NONBLOCKING: case STREAM_GSOURCE: return FALSE; default: g_assert_not_reached (); } } /* Whether @stream_api only works for reliable NiceAgents. */ static gboolean stream_api_is_reliable_only (StreamApi stream_api) { switch (stream_api) { case STREAM_GSOURCE: case STREAM_GIO: return TRUE; case STREAM_AGENT: case STREAM_AGENT_NONBLOCKING: return FALSE; default: g_assert_not_reached (); } } /* Whether @stream_api supports vectored I/O (multiple buffers or messages). */ static gboolean stream_api_supports_vectored_io (StreamApi stream_api) { switch (stream_api) { case STREAM_AGENT: case STREAM_AGENT_NONBLOCKING: return TRUE; case STREAM_GSOURCE: case STREAM_GIO: return FALSE; default: g_assert_not_reached (); } } /* Generate a size for the buffer containing the @buffer_offset-th byte. * Guaranteed to be in the interval [1, 1 << 16). ((1 << 16) is the maximum * message size.) */ static gsize generate_buffer_size (BufferSizeStrategy strategy, GRand *grand, gsize buffer_offset) { switch (strategy) { case BUFFER_SIZE_CONSTANT_LARGE: return (1 << 16) - 1; case BUFFER_SIZE_CONSTANT_SMALL: return 4096; case BUFFER_SIZE_CONSTANT_TINY: return 1; case BUFFER_SIZE_ASCENDING: return CLAMP (1L << buffer_offset, 1, (1 << 16) - 1); case BUFFER_SIZE_RANDOM: return g_rand_int_range (grand, 1, 1 << 16); default: g_assert_not_reached (); } } /* Generate a number of buffers to allocate when receiving the @buffer_offset-th * byte. Guaranteed to be in the interval [1, 100], where 100 was chosen * arbitrarily.*/ static guint generate_buffer_count (BufferCountStrategy strategy, GRand *grand, gsize buffer_offset) { switch (strategy) { case BUFFER_COUNT_CONSTANT_ONE: return 1; case BUFFER_COUNT_CONSTANT_TWO: return 2; case BUFFER_COUNT_RANDOM: return g_rand_int_range (grand, 1, 100 + 1); default: g_assert_not_reached (); } } /* Generate a number of messages to allocate and receive into when receiving the * @buffer_offset-th byte. Guaranteed to be in the interval [1, 100], where 100 * was chosen arbitrarily.*/ static guint generate_message_count (MessageCountStrategy strategy, GRand *grand, guint buffer_index) { switch (strategy) { case MESSAGE_COUNT_CONSTANT_ONE: return 1; case MESSAGE_COUNT_CONSTANT_TWO: return 2; case MESSAGE_COUNT_RANDOM: return g_rand_int_range (grand, 1, 100 + 1); default: g_assert_not_reached (); } } /* Fill the given @buf with @buf_len bytes of generated data. The data is * deterministically generated, so that: * generate_buffer_data(_, I, buf, 2) * and * generate_buffer_data(_, I+1, buf+1, 1) * generate the same buf[I+1] byte, for all I. * * The generation strategies are generally chosen to produce data which makes * send/receive errors (insertions, swaps, elisions) obvious. */ static void generate_buffer_data (BufferDataStrategy strategy, gsize buffer_offset, guint8 *buf, gsize buf_len) { switch (strategy) { case BUFFER_DATA_CONSTANT: memset (buf, 0xfe, buf_len); break; case BUFFER_DATA_ASCENDING: { gsize i; for (i = 0; i < buf_len; i++) { buf[i] = (i + buffer_offset) & 0xff; } break; } case BUFFER_DATA_PSEUDO_RANDOM: { gsize i; /* This can’t use GRand, because then the number of calls to g_rand_*() * methods would affect its output, and the bytes generated here have to be * entirely deterministic on @buffer_offset. * * Instead, use something akin to a LCG, except without any feedback * (because that would make it non-deterministic). The objective is to * generate numbers which are sufficiently pseudo-random that it’s likely * transpositions, elisions and insertions will be detected. * * The constants come from ‘ANSI C’ in: * http://en.wikipedia.org/wiki/Linear_congruential_generator */ for (i = 0; i < buf_len; i++) { buf[i] = (1103515245 * (buffer_offset + i) + 12345) & 0xff; } break; } default: g_assert_not_reached (); } } /* Choose a size and allocate a receive buffer in @buf, ready to receive bytes * starting at @buffer_offset into the stream. Fill the buffer with poison * values to hopefully make incorrect writes/reads more obvious. * * @buf must be freed with g_free(). */ static void generate_buffer_to_receive (TestIOStreamThreadData *data, gsize buffer_offset, guint8 **buf, gsize *buf_len) { TestData *test_data = data->user_data; /* Allocate the buffer. */ *buf_len = generate_buffer_size (test_data->receive.buffer_size_strategy, test_data->receive_size_rand, buffer_offset); *buf = g_malloc (*buf_len); /* Fill it with poison to try and detect incorrect writes. */ memset (*buf, 0xaa, *buf_len); } /* Similar to generate_buffer_to_receive(), but generate an entire message array * with multiple buffers instead. * * @max_buffer_size may be used to limit the total size of all the buffers in * all the messages, for example to avoid blocking on receiving data which will * never be sent. This only applies for blocking, reliable stream APIs. * * @max_n_messages may be used to limit the number of messages generated, to * avoid blocking on receiving messages which will never be sent. This only * applies for blocking, non-reliable stream APIs. * * @messages must be freed with g_free(), as must all of the buffer arrays and * the buffers themselves. */ static void generate_messages_to_receive (TestIOStreamThreadData *data, gsize buffer_offset, NiceInputMessage **messages, guint *n_messages, gsize max_buffer_size, guint max_n_messages) { TestData *test_data = data->user_data; guint i; /* Allocate the messages. */ *n_messages = generate_message_count (test_data->receive.message_count_strategy, test_data->receive_size_rand, buffer_offset); if (!data->reliable) *n_messages = MIN (*n_messages, max_n_messages); *messages = g_malloc_n (*n_messages, sizeof (NiceInputMessage)); for (i = 0; i < *n_messages; i++) { NiceInputMessage *message = &((*messages)[i]); guint j; message->n_buffers = generate_buffer_count (test_data->receive.buffer_count_strategy, test_data->receive_size_rand, buffer_offset); message->buffers = g_malloc_n (message->n_buffers, sizeof (GInputVector)); message->from = NULL; message->length = 0; for (j = 0; j < (guint) message->n_buffers; j++) { GInputVector *buffer = &message->buffers[j]; gsize buf_len; buf_len = generate_buffer_size (test_data->receive.buffer_size_strategy, test_data->receive_size_rand, buffer_offset); /* Trim the buffer length if it would otherwise cause the API to block. */ if (data->reliable) { buf_len = MIN (buf_len, max_buffer_size); max_buffer_size -= buf_len; } buffer->size = buf_len; buffer->buffer = g_malloc (buffer->size); /* Fill it with poison to try and detect incorrect writes. */ memset (buffer->buffer, 0xaa, buffer->size); /* If we’ve hit the max_buffer_size, adjust the buffer and message counts * and run away. */ if (data->reliable && max_buffer_size == 0) { message->n_buffers = j + 1; *n_messages = i + 1; return; } } } } /* Validate the length and data of a received buffer of length @buf_len, filled * with @len valid bytes. Updates the internal state machine to mark the bytes * as received. This consumes @buf. */ static void validate_received_buffer (TestIOStreamThreadData *data, gsize buffer_offset, guint8 **buf, gsize buf_len, gssize len) { TestData *test_data = data->user_data; guint8 *expected_buf; g_assert_cmpint (len, <=, buf_len); g_assert_cmpint (len, >=, 0); if (stream_api_is_blocking (test_data->stream_api) && data->reliable) g_assert_cmpint (len, ==, buf_len); /* Validate the buffer contents. * * Note: Buffers can only be validated up to valid_len. The buffer may * have been re-used internally (e.g. by receiving a STUN message, then * overwriting it with a data packet), so we can’t guarantee that the * bytes beyond valid_len have been untouched. */ expected_buf = g_malloc (buf_len); memset (expected_buf, 0xaa, buf_len); generate_buffer_data (test_data->buffer_data_strategy, buffer_offset, expected_buf, len); g_assert (memcmp (*buf, expected_buf, len) == 0); g_free (expected_buf); test_data->received_bytes += len; g_free (*buf); } /* Similar to validate_received_buffer(), except it validates a message array * instead of a single buffer. This consumes @messages. */ static void validate_received_messages (TestIOStreamThreadData *data, gsize buffer_offset, NiceInputMessage *messages, guint n_messages, gint n_valid_messages) { TestData *test_data = data->user_data; guint i; gsize prev_message_len = G_MAXSIZE; g_assert_cmpint (n_valid_messages, <=, n_messages); g_assert_cmpint (n_valid_messages, >=, 0); if (stream_api_is_blocking (test_data->stream_api)) g_assert_cmpint (n_valid_messages, ==, n_messages); test_data->received_messages += n_valid_messages; /* Validate the message contents. */ for (i = 0; i < (guint) n_valid_messages; i++) { NiceInputMessage *message = &messages[i]; guint j; gsize total_buf_len = 0; gsize message_len_remaining = message->length; g_assert_cmpint (message->n_buffers, >, 0); for (j = 0; j < (guint) message->n_buffers; j++) { GInputVector *buffer = &message->buffers[j]; gsize valid_len; /* See note above about valid_len. */ total_buf_len += buffer->size; valid_len = MIN (message_len_remaining, buffer->size); /* Only validate buffer content for reliable mode, anything could * be received in UDP mode */ if (test_data->reliable) { guint8 *expected_buf; expected_buf = g_malloc (buffer->size); memset (expected_buf, 0xaa, buffer->size); generate_buffer_data (test_data->buffer_data_strategy, buffer_offset, expected_buf, valid_len); g_assert_cmpint (memcmp (buffer->buffer, expected_buf, valid_len), ==, 0); g_free (expected_buf); buffer_offset += valid_len; message_len_remaining -= valid_len; } test_data->received_bytes += valid_len; } g_assert_cmpuint (message->length, <=, total_buf_len); g_assert_cmpuint (message->length, >=, 0); /* No non-empty messages can follow an empty message. */ if (prev_message_len == 0) g_assert_cmpuint (message->length, ==, 0); prev_message_len = message->length; /* If the API was blocking, it should have completely filled the message. */ if (stream_api_is_blocking (test_data->stream_api) && data->reliable) g_assert_cmpuint (message->length, ==, total_buf_len); g_assert (message->from == NULL); } /* Free all messages. */ for (i = 0; i < (guint) n_messages; i++) { NiceInputMessage *message = &messages[i]; guint j; for (j = 0; j < (guint) message->n_buffers; j++) { GInputVector *buffer = &message->buffers[j]; g_free (buffer->buffer); } g_free (message->buffers); } g_free (messages); } /* Determine a size for the next transmit buffer, allocate it, and fill it with * data to be transmitted. */ static void generate_buffer_to_transmit (TestIOStreamThreadData *data, gsize buffer_offset, guint8 **buf, gsize *buf_len) { TestData *test_data = data->user_data; /* Allocate the buffer. */ *buf_len = generate_buffer_size (test_data->transmit.buffer_size_strategy, test_data->transmit_size_rand, buffer_offset); *buf_len = MIN (*buf_len, test_data->n_bytes - test_data->transmitted_bytes); *buf = g_malloc (*buf_len); /* Fill it with data. */ generate_buffer_data (test_data->buffer_data_strategy, buffer_offset, *buf, *buf_len); } /* Similar to generate_buffer_to_transmit(), except that it generates an array * of NiceOutputMessages rather than a single buffer. */ static void generate_messages_to_transmit (TestIOStreamThreadData *data, gsize buffer_offset, NiceOutputMessage **messages, guint *n_messages) { TestData *test_data = data->user_data; guint i; gsize total_buf_len = 0; /* Determine the number of messages to send. */ *n_messages = generate_message_count (test_data->transmit.message_count_strategy, test_data->transmit_size_rand, buffer_offset); *n_messages = MIN (*n_messages, test_data->n_messages - test_data->transmitted_messages); *messages = g_malloc_n (*n_messages, sizeof (NiceOutputMessage)); for (i = 0; i < *n_messages; i++) { NiceOutputMessage *message = &((*messages)[i]); guint j; gsize max_message_size; gsize message_len = 0; message->n_buffers = generate_buffer_count (test_data->transmit.buffer_count_strategy, test_data->transmit_size_rand, buffer_offset); message->buffers = g_malloc_n (message->n_buffers, sizeof (GOutputVector)); /* Limit the overall message size to the smaller of (n_bytes / n_messages) * and MAX_MESSAGE_SIZE, to ensure each message is non-empty. */ max_message_size = MIN ((test_data->n_bytes / test_data->n_messages), MAX_MESSAGE_SIZE); for (j = 0; j < (guint) message->n_buffers; j++) { GOutputVector *buffer = &message->buffers[j]; gsize buf_len; guint8 *buf; buf_len = generate_buffer_size (test_data->transmit.buffer_size_strategy, test_data->transmit_size_rand, buffer_offset); buf_len = MIN (buf_len, test_data->n_bytes - test_data->transmitted_bytes - total_buf_len); buf_len = MIN (buf_len, max_message_size - message_len); buffer->size = buf_len; buf = g_malloc (buffer->size); buffer->buffer = buf; message_len += buf_len; total_buf_len += buf_len; /* Fill it with data. */ generate_buffer_data (test_data->buffer_data_strategy, buffer_offset, buf, buf_len); buffer_offset += buf_len; /* Reached the maximum UDP payload size? */ if (message_len >= max_message_size) { message->n_buffers = j + 1; break; } } g_assert_cmpuint (message_len, <=, max_message_size); } } /* Validate the number of bytes transmitted, and update the test’s internal * state machine. Consumes @buf. */ static void notify_transmitted_buffer (TestIOStreamThreadData *data, gsize buffer_offset, guint8 **buf, gsize buf_len, gssize len) { TestData *test_data = data->user_data; g_assert_cmpint (len, <=, buf_len); g_assert_cmpint (len, >=, 0); test_data->transmitted_bytes += len; g_free (*buf); } static gsize output_message_get_size (const NiceOutputMessage *message) { guint i; gsize message_len = 0; /* Find the total size of the message */ for (i = 0; (message->n_buffers >= 0 && i < (guint) message->n_buffers) || (message->n_buffers < 0 && message->buffers[i].buffer != NULL); i++) message_len += message->buffers[i].size; return message_len; } /* Similar to notify_transmitted_buffer(), except it operates on an array of * messages from generate_messages_to_transmit(). */ static void notify_transmitted_messages (TestIOStreamThreadData *data, gsize buffer_offset, NiceOutputMessage **messages, guint n_messages, gint n_sent_messages) { TestData *test_data = data->user_data; guint i; g_assert_cmpint (n_sent_messages, <=, n_messages); g_assert_cmpint (n_sent_messages, >=, 0); test_data->transmitted_messages += n_sent_messages; for (i = 0; i < n_messages; i++) { NiceOutputMessage *message = &((*messages)[i]); guint j; if (i < (guint) n_sent_messages) test_data->transmitted_bytes += output_message_get_size (message); for (j = 0; j < (guint) message->n_buffers; j++) { GOutputVector *buffer = &message->buffers[j]; g_free ((guint8 *) buffer->buffer); } g_free (message->buffers); } g_free (*messages); } /* * Implementation using nice_agent_recv_messages() and nice_agent_send(). */ static void read_thread_agent_cb (GInputStream *input_stream, TestIOStreamThreadData *data) { TestData *test_data = data->user_data; guint stream_id, component_id; gpointer tmp; tmp = g_object_get_data (G_OBJECT (data->agent), "stream-id"); stream_id = GPOINTER_TO_UINT (tmp); component_id = 1; while (test_data->received_bytes < test_data->n_bytes) { GError *error = NULL; NiceInputMessage *messages; guint n_messages; gint n_valid_messages; /* Initialise an array of messages to receive into. */ generate_messages_to_receive (data, test_data->received_bytes, &messages, &n_messages, test_data->n_bytes - test_data->received_bytes, test_data->n_messages - test_data->received_messages); /* Block on receiving some data. */ n_valid_messages = nice_agent_recv_messages (data->agent, stream_id, component_id, messages, n_messages, NULL, &error); g_assert_no_error (error); /* Check the messages and update the test’s state machine. */ validate_received_messages (data, test_data->received_bytes, messages, n_messages, n_valid_messages); } check_for_termination (data, &test_data->received_bytes, test_data->other_received_bytes, &test_data->transmitted_bytes, test_data->n_bytes); } static void write_thread_agent_cb (GOutputStream *output_stream, TestIOStreamThreadData *data) { TestData *test_data = data->user_data; guint stream_id, component_id; gpointer tmp; tmp = g_object_get_data (G_OBJECT (data->agent), "stream-id"); stream_id = GPOINTER_TO_UINT (tmp); component_id = 1; while (test_data->transmitted_bytes < test_data->n_bytes) { GError *error = NULL; NiceOutputMessage *messages; guint n_messages; gint n_sent_messages; /* Generate a buffer to transmit. */ generate_messages_to_transmit (data, test_data->transmitted_bytes, &messages, &n_messages); /* Busy loop on receiving some data. */ do { g_clear_error (&error); n_sent_messages = nice_agent_send_messages_nonblocking (data->agent, stream_id, component_id, messages, n_messages, NULL, &error); } while (n_sent_messages == -1 && g_error_matches (error, G_IO_ERROR, G_IO_ERROR_WOULD_BLOCK)); g_assert_no_error (error); /* Update the test’s buffer generation state machine. */ notify_transmitted_messages (data, test_data->transmitted_bytes, &messages, n_messages, n_sent_messages); } } /* * Implementation using nice_agent_recv_nonblocking() and * nice_agent_send_nonblocking(). */ static void read_thread_agent_nonblocking_cb (GInputStream *input_stream, TestIOStreamThreadData *data) { TestData *test_data = data->user_data; guint stream_id, component_id; gpointer tmp; tmp = g_object_get_data (G_OBJECT (data->agent), "stream-id"); stream_id = GPOINTER_TO_UINT (tmp); component_id = 1; while (test_data->received_bytes < test_data->n_bytes) { GError *error = NULL; NiceInputMessage *messages; guint n_messages; gint n_valid_messages; /* Initialise an array of messages to receive into. */ generate_messages_to_receive (data, test_data->received_bytes, &messages, &n_messages, test_data->n_bytes - test_data->received_bytes, test_data->n_messages - test_data->received_messages); /* Trim n_messages to avoid consuming the ‘done’ message. */ n_messages = MIN (n_messages, test_data->n_messages - test_data->received_messages); /* Busy loop on receiving some data. */ do { g_clear_error (&error); n_valid_messages = nice_agent_recv_messages_nonblocking (data->agent, stream_id, component_id, messages, n_messages, NULL, &error); } while (n_valid_messages == -1 && g_error_matches (error, G_IO_ERROR, G_IO_ERROR_WOULD_BLOCK)); g_assert_no_error (error); /* Check the messages and update the test’s state machine. */ validate_received_messages (data, test_data->received_bytes, messages, n_messages, n_valid_messages); } check_for_termination (data, &test_data->received_bytes, test_data->other_received_bytes, &test_data->transmitted_bytes, test_data->n_bytes); } static void wait_transmission_cb (NiceAgent *agent) { guint stream_id; gpointer tmp; guint8 buffer[1024]; GInputVector v = { &buffer, sizeof (buffer) }; NiceInputMessage message = { &v, 1, NULL, 0}; tmp = g_object_get_data (G_OBJECT (agent), "stream-id"); stream_id = GPOINTER_TO_UINT (tmp); /* While waiting for write thread to finish sending, keep also receiving so * that any STUN messages from the peer still get processed. */ nice_agent_recv_messages_nonblocking (agent, stream_id, 1, &message, 1, NULL, NULL); } static void write_thread_agent_nonblocking_cb (GOutputStream *output_stream, TestIOStreamThreadData *data) { /* FIXME: There is no nice_agent_send_nonblocking(); nice_agent_send() is * non-blocking by default. */ write_thread_agent_cb (output_stream, data); } /* * Implementation using NiceInputStream and NiceOutputStream. */ static void read_thread_gio_cb (GInputStream *input_stream, TestIOStreamThreadData *data) { TestData *test_data = data->user_data; while (test_data->received_bytes < test_data->n_bytes) { GError *error = NULL; guint8 *buf = NULL; gsize buf_len = 0; gssize len; /* Initialise a receive buffer. */ generate_buffer_to_receive (data, test_data->received_bytes, &buf, &buf_len); /* Trim the receive buffer to avoid blocking on bytes which will never * appear. */ buf_len = MIN (buf_len, test_data->n_bytes - test_data->received_bytes); /* Block on receiving some data. */ len = g_input_stream_read (input_stream, buf, buf_len, NULL, &error); g_assert_no_error (error); /* Check the buffer and update the test’s state machine. */ validate_received_buffer (data, test_data->received_bytes, &buf, buf_len, len); } check_for_termination (data, &test_data->received_bytes, test_data->other_received_bytes, &test_data->transmitted_bytes, test_data->n_bytes); } static void write_thread_gio_cb (GOutputStream *output_stream, TestIOStreamThreadData *data) { TestData *test_data = data->user_data; while (test_data->transmitted_bytes < test_data->n_bytes) { GError *error = NULL; guint8 *buf = NULL; gsize buf_len = 0; gssize len; gsize total_len = 0; /* Generate a buffer to transmit. */ generate_buffer_to_transmit (data, test_data->transmitted_bytes, &buf, &buf_len); /* Transmit it. */ do { len = g_output_stream_write (output_stream, buf + total_len, buf_len - total_len, NULL, &error); g_assert_no_error (error); total_len += len; } while (total_len < buf_len); /* Update the test’s buffer generation state machine. */ notify_transmitted_buffer (data, test_data->transmitted_bytes, &buf, buf_len, total_len); } } /* * Implementation using GPollableInputStream and GPollableOutputStream. * * GSourceData is effectively the closure for the ‘for’ loop in other stream API * implementations. */ typedef struct { TestIOStreamThreadData *data; GMainLoop *main_loop; } GSourceData; static gboolean read_stream_cb (GObject *pollable_stream, gpointer _user_data) { GSourceData *gsource_data = _user_data; TestIOStreamThreadData *data = gsource_data->data; TestData *test_data = data->user_data; GError *error = NULL; guint8 *buf = NULL; gsize buf_len = 0; gssize len; /* Initialise a receive buffer. */ generate_buffer_to_receive (data, test_data->received_bytes, &buf, &buf_len); /* Trim the receive buffer to avoid consuming the ‘done’ message. */ buf_len = MIN (buf_len, test_data->n_bytes - test_data->received_bytes); /* Try to receive some data. */ len = g_pollable_input_stream_read_nonblocking ( G_POLLABLE_INPUT_STREAM (pollable_stream), buf, buf_len, NULL, &error); if (len == -1) { g_assert_error (error, G_IO_ERROR, G_IO_ERROR_WOULD_BLOCK); g_error_free (error); g_free (buf); return G_SOURCE_CONTINUE; } g_assert_no_error (error); /* Check the buffer and update the test’s state machine. */ validate_received_buffer (data, test_data->received_bytes, &buf, buf_len, len); /* Termination time? */ if (test_data->received_bytes == test_data->n_bytes) { g_main_loop_quit (gsource_data->main_loop); return G_SOURCE_REMOVE; } return G_SOURCE_CONTINUE; } static void read_thread_gsource_cb (GInputStream *input_stream, TestIOStreamThreadData *data) { TestData *test_data = data->user_data; GSourceData gsource_data; GMainContext *main_context; GMainLoop *main_loop; GSource *stream_source; main_context = g_main_context_ref_thread_default (); main_loop = g_main_loop_new (main_context, FALSE); gsource_data.data = data; gsource_data.main_loop = main_loop; stream_source = g_pollable_input_stream_create_source ( G_POLLABLE_INPUT_STREAM (input_stream), NULL); g_source_set_callback (stream_source, G_SOURCE_FUNC (read_stream_cb), &gsource_data, NULL); g_source_attach (stream_source, main_context); /* Run the main loop. */ g_main_loop_run (main_loop); g_source_destroy (stream_source); g_source_unref (stream_source); g_main_loop_unref (main_loop); g_main_context_unref (main_context); /* Termination? */ check_for_termination (data, &test_data->received_bytes, test_data->other_received_bytes, &test_data->transmitted_bytes, test_data->n_bytes); } static gboolean write_stream_cb (GObject *pollable_stream, gpointer _user_data) { GSourceData *gsource_data = _user_data; TestIOStreamThreadData *data = gsource_data->data; TestData *test_data = data->user_data; GError *error = NULL; guint8 *buf = NULL; gsize buf_len = 0; gssize len; /* Initialise a receive buffer. */ generate_buffer_to_transmit (data, test_data->transmitted_bytes, &buf, &buf_len); /* Try to transmit some data. */ len = g_pollable_output_stream_write_nonblocking ( G_POLLABLE_OUTPUT_STREAM (pollable_stream), buf, buf_len, NULL, &error); if (len == -1) { g_assert_error (error, G_IO_ERROR, G_IO_ERROR_WOULD_BLOCK); g_free (buf); return G_SOURCE_CONTINUE; } g_assert_no_error (error); /* Update the test’s buffer generation state machine. */ notify_transmitted_buffer (data, test_data->transmitted_bytes, &buf, buf_len, len); /* Termination time? */ if (test_data->transmitted_bytes == test_data->n_bytes) { g_main_loop_quit (gsource_data->main_loop); return G_SOURCE_REMOVE; } return G_SOURCE_CONTINUE; } static void write_thread_gsource_cb (GOutputStream *output_stream, TestIOStreamThreadData *data) { GSourceData gsource_data; GMainContext *main_context; GMainLoop *main_loop; GSource *stream_source; main_context = g_main_context_ref_thread_default (); main_loop = g_main_loop_new (main_context, FALSE); gsource_data.data = data; gsource_data.main_loop = main_loop; stream_source = g_pollable_output_stream_create_source ( G_POLLABLE_OUTPUT_STREAM (output_stream), NULL); g_source_set_callback (stream_source, G_SOURCE_FUNC (write_stream_cb), &gsource_data, NULL); g_source_attach (stream_source, main_context); /* Run the main loop. */ g_main_loop_run (main_loop); g_source_destroy (stream_source); g_source_unref (stream_source); g_main_loop_unref (main_loop); g_main_context_unref (main_context); } static void test_data_init (TestData *data, gboolean reliable, StreamApi stream_api, gsize n_bytes, guint n_messages, BufferSizeStrategy transmit_buffer_size_strategy, BufferCountStrategy transmit_buffer_count_strategy, MessageCountStrategy transmit_message_count_strategy, BufferSizeStrategy receive_buffer_size_strategy, BufferCountStrategy receive_buffer_count_strategy, MessageCountStrategy receive_message_count_strategy, BufferDataStrategy buffer_data_strategy, guint32 transmit_seed, guint32 receive_seed, gsize *other_received_bytes, guint *other_received_messages) { data->reliable = reliable; data->stream_api = stream_api; data->n_bytes = n_bytes; data->n_messages = n_messages; data->transmit.buffer_size_strategy = transmit_buffer_size_strategy; data->transmit.buffer_count_strategy = transmit_buffer_count_strategy; data->transmit.message_count_strategy = transmit_message_count_strategy; data->receive.buffer_size_strategy = receive_buffer_size_strategy; data->receive.buffer_count_strategy = receive_buffer_count_strategy; data->receive.message_count_strategy = receive_message_count_strategy; data->buffer_data_strategy = buffer_data_strategy; data->transmit_size_rand = g_rand_new_with_seed (transmit_seed); data->receive_size_rand = g_rand_new_with_seed (receive_seed); data->transmitted_bytes = 0; data->received_bytes = 0; data->other_received_bytes = other_received_bytes; data->transmitted_messages = 0; data->received_messages = 0; data->other_received_messages = other_received_messages; } /* * Test closures. */ static void test_data_clear (TestData *data) { g_rand_free (data->receive_size_rand); g_rand_free (data->transmit_size_rand); } static void test (gboolean reliable, StreamApi stream_api, gsize n_bytes, guint n_messages, BufferSizeStrategy transmit_buffer_size_strategy, BufferCountStrategy transmit_buffer_count_strategy, MessageCountStrategy transmit_message_count_strategy, BufferSizeStrategy receive_buffer_size_strategy, BufferCountStrategy receive_buffer_count_strategy, MessageCountStrategy receive_message_count_strategy, BufferDataStrategy buffer_data_strategy, guint32 transmit_seed, guint32 receive_seed, guint deadlock_timeout) { TestData l_data, r_data; /* Indexed by StreamApi. */ const TestIOStreamCallbacks callbacks[] = { { read_thread_agent_cb, write_thread_agent_cb, NULL, NULL, wait_transmission_cb }, /* STREAM_AGENT */ { read_thread_agent_nonblocking_cb, write_thread_agent_nonblocking_cb, NULL, NULL, wait_transmission_cb }, /* STREAM_AGENT_NONBLOCKING */ { read_thread_gio_cb, write_thread_gio_cb, NULL, NULL, NULL}, /* STREAM_GIO */ { read_thread_gsource_cb, write_thread_gsource_cb, NULL, NULL, NULL }, /* STREAM_GSOURCE */ }; test_data_init (&l_data, reliable, stream_api, n_bytes, n_messages, transmit_buffer_size_strategy, transmit_buffer_count_strategy, transmit_message_count_strategy, receive_buffer_size_strategy, receive_buffer_count_strategy, receive_message_count_strategy, buffer_data_strategy, transmit_seed, receive_seed, &r_data.received_bytes, &r_data.received_messages); test_data_init (&r_data, reliable, stream_api, n_bytes, n_messages, transmit_buffer_size_strategy, transmit_buffer_count_strategy, transmit_message_count_strategy, receive_buffer_size_strategy, receive_buffer_count_strategy, receive_message_count_strategy, buffer_data_strategy, transmit_seed, receive_seed, &l_data.received_bytes, &l_data.received_messages); run_io_stream_test (deadlock_timeout, reliable, &callbacks[stream_api], &l_data, NULL, &r_data, NULL); test_data_clear (&r_data); test_data_clear (&l_data); } /* Options with default values. */ guint32 option_transmit_seed = 0; guint32 option_receive_seed = 0; gsize option_n_bytes = 10000; guint option_n_messages = 50; guint option_timeout = 15; /* seconds */ gboolean option_long_mode = FALSE; static GOptionEntry entries[] = { { "transmit-seed", 0, 0, G_OPTION_ARG_INT, &option_transmit_seed, "Seed for transmission RNG", "S" }, { "receive-seed", 0, 0, G_OPTION_ARG_INT, &option_receive_seed, "Seed for reception RNG", "S" }, { "n-bytes", 'n', 0, G_OPTION_ARG_INT64, &option_n_bytes, "Number of bytes to send in each test (default 10000)", "N" }, { "n-messages", 'm', 0, G_OPTION_ARG_INT64, &option_n_messages, "Number of messages to send in each test (default 50)", "M" }, { "timeout", 't', 0, G_OPTION_ARG_INT, &option_timeout, "Deadlock detection timeout length, in seconds (default: 15)", "S" }, { "long-mode", 'l', 0, G_OPTION_ARG_NONE, &option_long_mode, "Enable all tests, rather than a fast subset", NULL }, { NULL }, }; int main (int argc, char *argv[]) { gboolean reliable; StreamApi stream_api; BufferSizeStrategy transmit_buffer_size_strategy; BufferCountStrategy transmit_buffer_count_strategy; MessageCountStrategy transmit_message_count_strategy; BufferSizeStrategy receive_buffer_size_strategy; BufferCountStrategy receive_buffer_count_strategy; MessageCountStrategy receive_message_count_strategy; BufferDataStrategy buffer_data_strategy; guint32 transmit_seed; guint32 receive_seed; gsize n_bytes; guint n_messages; guint deadlock_timeout; gboolean long_mode; GOptionContext *context; GError *error = NULL; /* Argument parsing. Allow some of the test parameters to be specified on the * command line. */ context = g_option_context_new ("— test send()/recv() correctness"); g_option_context_add_main_entries (context, entries, NULL); if (!g_option_context_parse (context, &argc, &argv, &error)) { g_printerr ("Option parsing failed: %s\n", error->message); g_error_free (error); g_option_context_free (context); exit (1); } /* Set up the defaults. */ transmit_seed = option_transmit_seed; receive_seed = option_receive_seed; n_bytes = option_n_bytes; n_messages = option_n_messages; deadlock_timeout = option_timeout; long_mode = option_long_mode; #ifdef G_OS_WIN32 WSADATA w; WSAStartup (0x0202, &w); #endif if (!long_mode) { /* Quick mode. Just test each of the stream APIs in reliable and * non-reliable mode, with a single pair of buffer strategies, and a single * data strategy. */ /* Reliability. */ for (reliable = 0; reliable < 2; reliable++) { /* Stream API. */ for (stream_api = 0; (guint) stream_api < STREAM_API_N_ELEMENTS; stream_api++) { /* GIO streams must always be reliable. */ if (!reliable && stream_api_is_reliable_only (stream_api)) continue; /* Non-reliable socket receives require large buffers. */ if (reliable) { receive_buffer_size_strategy = BUFFER_SIZE_RANDOM; } else { receive_buffer_size_strategy = BUFFER_SIZE_CONSTANT_LARGE; } transmit_buffer_size_strategy = BUFFER_SIZE_RANDOM; buffer_data_strategy = BUFFER_DATA_PSEUDO_RANDOM; if (stream_api_supports_vectored_io (stream_api)) { transmit_buffer_count_strategy = BUFFER_COUNT_RANDOM; transmit_message_count_strategy = MESSAGE_COUNT_RANDOM; receive_buffer_count_strategy = BUFFER_COUNT_RANDOM; receive_message_count_strategy = MESSAGE_COUNT_RANDOM; } else { transmit_buffer_count_strategy = BUFFER_COUNT_CONSTANT_ONE; transmit_message_count_strategy = MESSAGE_COUNT_CONSTANT_ONE; receive_buffer_count_strategy = BUFFER_COUNT_CONSTANT_ONE; receive_message_count_strategy = MESSAGE_COUNT_CONSTANT_ONE; } g_debug ("Running test (%u, %u, %" G_GSIZE_FORMAT ", %u, %u, " "%u, %u, %u, %u)…", reliable, stream_api, n_bytes, n_messages, transmit_buffer_size_strategy, receive_buffer_size_strategy, buffer_data_strategy, transmit_seed, receive_seed); test (reliable, stream_api, n_bytes, n_messages, transmit_buffer_size_strategy, transmit_buffer_count_strategy, transmit_message_count_strategy, receive_buffer_size_strategy, receive_buffer_count_strategy, receive_message_count_strategy, buffer_data_strategy, transmit_seed, receive_seed, deadlock_timeout); } } goto done; } #define STRATEGY_LOOP(V, L) for (V = 0; (guint) V < L##_N_ELEMENTS; V++) STRATEGY_LOOP(transmit_buffer_size_strategy, BUFFER_SIZE_STRATEGY) STRATEGY_LOOP(transmit_buffer_count_strategy, BUFFER_COUNT_STRATEGY) STRATEGY_LOOP(transmit_message_count_strategy, MESSAGE_COUNT_STRATEGY) STRATEGY_LOOP(receive_buffer_size_strategy, BUFFER_SIZE_STRATEGY) STRATEGY_LOOP(receive_buffer_count_strategy, BUFFER_COUNT_STRATEGY) STRATEGY_LOOP(receive_message_count_strategy, MESSAGE_COUNT_STRATEGY) STRATEGY_LOOP(buffer_data_strategy, BUFFER_DATA_STRATEGY) /* Reliability. */ for (reliable = 0; reliable < 2; reliable++) { /* Stream API. */ for (stream_api = 0; (guint) stream_api < STREAM_API_N_ELEMENTS; stream_api++) { /* GIO streams must always be reliable. */ if (!reliable && stream_api_is_reliable_only (stream_api)) continue; /* Non-reliable socket receives require large buffers. We don’t claim to * support using them with small (< 65536B) buffers, so don’t test * them. */ if (!reliable && receive_buffer_size_strategy != BUFFER_SIZE_CONSTANT_LARGE) continue; /* Non-reliable socket transmits will always block with huge buffers. */ if (!reliable && transmit_buffer_size_strategy == BUFFER_SIZE_CONSTANT_LARGE) continue; /* Stream APIs which don’t support vectored I/O must not be passed * I/O vectors. */ if (!stream_api_supports_vectored_io (stream_api) && (transmit_buffer_count_strategy != BUFFER_COUNT_CONSTANT_ONE || transmit_message_count_strategy != MESSAGE_COUNT_CONSTANT_ONE || receive_buffer_count_strategy != BUFFER_COUNT_CONSTANT_ONE || receive_message_count_strategy != MESSAGE_COUNT_CONSTANT_ONE)) continue; g_debug ("Running test (%u, %u, %" G_GSIZE_FORMAT ", %u, %u, " "%u, %u, %u, %u, %u, %u, %u, %u)…", reliable, stream_api, n_bytes, n_messages, transmit_buffer_size_strategy, transmit_buffer_count_strategy, transmit_message_count_strategy, receive_buffer_size_strategy, receive_buffer_count_strategy, receive_message_count_strategy, buffer_data_strategy, transmit_seed, receive_seed); test (reliable, stream_api, n_bytes, n_messages, transmit_buffer_size_strategy, transmit_buffer_count_strategy, transmit_message_count_strategy, receive_buffer_size_strategy, receive_buffer_count_strategy, receive_message_count_strategy, buffer_data_strategy, transmit_seed, receive_seed, deadlock_timeout); } } done: g_option_context_free (context); #ifdef G_OS_WIN32 WSACleanup (); #endif return 0; }