/* * Public libusb header file * Copyright (C) 2007-2008 Daniel Drake * Copyright (c) 2001 Johannes Erdfelt * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef __LIBUSB_H__ #define __LIBUSB_H__ #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif /** \def libusb_cpu_to_le16 * \ingroup misc * Convert a 16-bit value from host-endian to little-endian format. On * little endian systems, this function does nothing. On big endian systems, * the bytes are swapped. * \param x the host-endian value to convert * \returns the value in little-endian byte order */ #define libusb_cpu_to_le16(x) ({ \ union { \ uint8_t b8[2]; \ uint16_t b16; \ } _tmp; \ uint16_t _tmp2 = (uint16_t)(x); \ _tmp.b8[1] = _tmp2 >> 8; \ _tmp.b8[0] = _tmp2 & 0xff; \ _tmp.b16; \ }) /** \def libusb_le16_to_cpu * \ingroup misc * Convert a 16-bit value from little-endian to host-endian format. On * little endian systems, this function does nothing. On big endian systems, * the bytes are swapped. * \param x the little-endian value to convert * \returns the value in host-endian byte order */ #define libusb_le16_to_cpu libusb_cpu_to_le16 /* standard USB stuff */ /** \ingroup desc * Device and/or Interface Class codes */ enum libusb_class_code { /** In the context of a \ref libusb_device_descriptor "device descriptor", * this bDeviceClass value indicates that each interface specifies its * own class information and all interfaces operate independently. */ LIBUSB_CLASS_PER_INTERFACE = 0, /** Audio class */ LIBUSB_CLASS_AUDIO = 1, /** Communications class */ LIBUSB_CLASS_COMM = 2, /** Human Interface Device class */ LIBUSB_CLASS_HID = 3, /** Printer dclass */ LIBUSB_CLASS_PRINTER = 7, /** Picture transfer protocol class */ LIBUSB_CLASS_PTP = 6, /** Mass storage class */ LIBUSB_CLASS_MASS_STORAGE = 8, /** Hub class */ LIBUSB_CLASS_HUB = 9, /** Data class */ LIBUSB_CLASS_DATA = 10, /** Class is vendor-specific */ LIBUSB_CLASS_VENDOR_SPEC = 0xff }; /** \ingroup desc * Descriptor types as defined by the USB specification. */ enum libusb_descriptor_type { /** Device descriptor. See libusb_device_descriptor. */ LIBUSB_DT_DEVICE = 0x01, /** Configuration descriptor. See libusb_config_descriptor. */ LIBUSB_DT_CONFIG = 0x02, /** String descriptor */ LIBUSB_DT_STRING = 0x03, /** Interface descriptor. See libusb_interface_descriptor. */ LIBUSB_DT_INTERFACE = 0x04, /** Endpoint descriptor. See libusb_endpoint_descriptor. */ LIBUSB_DT_ENDPOINT = 0x05, /** HID descriptor */ LIBUSB_DT_HID = 0x21, /** HID report descriptor */ LIBUSB_DT_REPORT = 0x22, /** Physical descriptor */ LIBUSB_DT_PHYSICAL = 0x23, /** Hub descriptor */ LIBUSB_DT_HUB = 0x29 }; /* Descriptor sizes per descriptor type */ #define LIBUSB_DT_DEVICE_SIZE 18 #define LIBUSB_DT_CONFIG_SIZE 9 #define LIBUSB_DT_INTERFACE_SIZE 9 #define LIBUSB_DT_ENDPOINT_SIZE 7 #define LIBUSB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ #define LIBUSB_DT_HUB_NONVAR_SIZE 7 #define LIBUSB_ENDPOINT_ADDRESS_MASK 0x0f /* in bEndpointAddress */ #define LIBUSB_ENDPOINT_DIR_MASK 0x80 /** \ingroup desc * Endpoint direction. Values for bit 7 of the * \ref libusb_endpoint_descriptor::bEndpointAddress "endpoint address" scheme. */ enum libusb_endpoint_direction { /** In: device-to-host */ LIBUSB_ENDPOINT_IN = 0x80, /** Out: host-to-device */ LIBUSB_ENDPOINT_OUT = 0x00 }; #define LIBUSB_TRANSFER_TYPE_MASK 0x03 /* in bmAttributes */ /** \ingroup desc * Endpoint transfer type. Values for bits 0:1 of the * \ref libusb_endpoint_descriptor::bmAttributes "endpoint attributes" field. */ enum libusb_transfer_type { /** Control endpoint */ LIBUSB_TRANSFER_TYPE_CONTROL = 0, /** Isochronous endpoint */ LIBUSB_TRANSFER_TYPE_ISOCHRONOUS = 1, /** Bulk endpoint */ LIBUSB_TRANSFER_TYPE_BULK = 2, /** Interrupt endpoint */ LIBUSB_TRANSFER_TYPE_INTERRUPT = 3 }; /** \ingroup misc * Standard requests, as defined in table 9-3 of the USB2 specifications */ enum libusb_standard_request { /** Request status of the specific recipient */ LIBUSB_REQUEST_GET_STATUS = 0x00, /** Clear or disable a specific feature */ LIBUSB_REQUEST_CLEAR_FEATURE = 0x01, /* 0x02 is reserved */ /** Set or enable a specific feature */ LIBUSB_REQUEST_SET_FEATURE = 0x03, /* 0x04 is reserved */ /** Set device address for all future accesses */ LIBUSB_REQUEST_SET_ADDRESS = 0x05, /** Get the specified descriptor */ LIBUSB_REQUEST_GET_DESCRIPTOR = 0x06, /** Used to update existing descriptors or add new descriptors */ LIBUSB_REQUEST_SET_DESCRIPTOR = 0x07, /** Get the current device configuration value */ LIBUSB_REQUEST_GET_CONFIGURATION = 0x08, /** Set device configuration */ LIBUSB_REQUEST_SET_CONFIGURATION = 0x09, /** Return the selected alternate setting for the specified interface */ LIBUSB_REQUEST_GET_INTERFACE = 0x0A, /** Select an alternate interface for the specified interface */ LIBUSB_REQUEST_SET_INTERFACE = 0x0B, /** Set then report an endpoint's synchronization frame */ LIBUSB_REQUEST_SYNCH_FRAME = 0x0C }; /** \ingroup misc * Request type bits of the * \ref libusb_control_setup::bmRequestType "bmRequestType" field in control * transfers. */ enum libusb_request_type { /** Standard */ LIBUSB_REQUEST_TYPE_STANDARD = (0x00 << 5), /** Class */ LIBUSB_REQUEST_TYPE_CLASS = (0x01 << 5), /** Vendor */ LIBUSB_REQUEST_TYPE_VENDOR = (0x02 << 5), /** Reserved */ LIBUSB_REQUEST_TYPE_RESERVED = (0x03 << 5) }; /** \ingroup misc * Recipient bits of the * \ref libusb_control_setup::bmRequestType "bmRequestType" field in control * transfers. Values 4 through 31 are reserved. */ enum libusb_request_recipient { /** Device */ LIBUSB_RECIPIENT_DEVICE = 0x00, /** Interface */ LIBUSB_RECIPIENT_INTERFACE = 0x01, /** Endpoint */ LIBUSB_RECIPIENT_ENDPOINT = 0x02, /** Other */ LIBUSB_RECIPIENT_OTHER = 0x03 }; #define LIBUSB_ISO_SYNC_TYPE_MASK 0x0C /** \ingroup desc * Synchronization type for isochronous endpoints. Values for bits 2:3 of the * \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in * libusb_endpoint_descriptor. */ enum libusb_iso_sync_type { /** No synchronization */ LIBUSB_ISO_SYNC_TYPE_NONE = 0, /** Asynchronous */ LIBUSB_ISO_SYNC_TYPE_ASYNC = 1, /** Adaptive */ LIBUSB_ISO_SYNC_TYPE_ADAPTIVE = 2, /** Synchronous */ LIBUSB_ISO_SYNC_TYPE_SYNC = 3 }; #define LIBUSB_ISO_USAGE_TYPE_MASK 0x30 /** \ingroup desc * Usage type for isochronous endpoints. Values for bits 4:5 of the * \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in * libusb_endpoint_descriptor. */ enum libusb_iso_usage_type { /** Data endpoint */ LIBUSB_ISO_USAGE_TYPE_DATA = 0, /** Feedback endpoint */ LIBUSB_ISO_USAGE_TYPE_FEEDBACK = 1, /** Implicit feedback Data endpoint */ LIBUSB_ISO_USAGE_TYPE_IMPLICIT = 2 }; /** \ingroup desc * A structure representing the standard USB device descriptor. This * descriptor is documented in section 9.6.1 of the USB 2.0 specification. * All multiple-byte fields are represented in host-endian format. */ struct libusb_device_descriptor { /** Size of this descriptor (in bytes) */ uint8_t bLength; /** Descriptor type. Will have value * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE LIBUSB_DT_DEVICE in this * context. */ uint8_t bDescriptorType; /** USB specification release number in binary-coded decimal. A value of * 0x0200 indicates USB 2.0, 0x0110 indicates USB 1.1, etc. */ uint16_t bcdUSB; /** USB-IF class code for the device. See \ref libusb_class_code. */ uint8_t bDeviceClass; /** USB-IF subclass code for the device, qualified by the bDeviceClass * value */ uint8_t bDeviceSubClass; /** USB-IF protocol code for the device, qualified by the bDeviceClass and * bDeviceSubClass values */ uint8_t bDeviceProtocol; /** Maximum packet size for endpoint 0 */ uint8_t bMaxPacketSize0; /** USB-IF vendor ID */ uint16_t idVendor; /** USB-IF product ID */ uint16_t idProduct; /** Device release number in binary-coded decimal */ uint16_t bcdDevice; /** Index of string descriptor describing manufacturer */ uint8_t iManufacturer; /** Index of string descriptor describing product */ uint8_t iProduct; /** Index of string descriptor containing device serial number */ uint8_t iSerialNumber; /** Number of possible configurations */ uint8_t bNumConfigurations; }; /** \ingroup desc * A structure representing the standard USB endpoint descriptor. This * descriptor is documented in section 9.6.3 of the USB 2.0 specification. * All multiple-byte fields are represented in host-endian format. */ struct libusb_endpoint_descriptor { /** Size of this descriptor (in bytes) */ uint8_t bLength; /** Descriptor type. Will have value * \ref libusb_descriptor_type::LIBUSB_DT_ENDPOINT LIBUSB_DT_ENDPOINT in * this context. */ uint8_t bDescriptorType; /** The address of the endpoint described by this descriptor. Bits 0:3 are * the endpoint number. Bits 4:6 are reserved. Bit 7 indicates direction, * see \ref libusb_endpoint_direction. */ uint8_t bEndpointAddress; /** Attributes which apply to the endpoint when it is configured using * the bConfigurationValue. Bits 0:1 determine the transfer type and * correspond to \ref libusb_transfer_type. Bits 2:3 are only used for * isochronous endpoints and correspond to \ref libusb_iso_sync_type. * Bits 4:5 are also only used for isochronous endpoints and correspond to * \ref libusb_iso_usage_type. Bits 6:7 are reserved. */ uint8_t bmAttributes; /** Maximum packet size this endpoint is capable of sending/receiving. */ uint16_t wMaxPacketSize; /** Interval for polling endpoint for data transfers. */ uint8_t bInterval; /** For audio devices only: the rate at which synchronization feedback * is provided. */ uint8_t bRefresh; /** For audio devices only: the address if the synch endpoint */ uint8_t bSynchAddress; /** Extra descriptors. If libusb encounters unknown endpoint descriptors, * it will store them here, should you wish to parse them. */ const unsigned char *extra; /** Length of the extra descriptors, in bytes. */ int extra_length; }; /** \ingroup desc * A structure representing the standard USB interface descriptor. This * descriptor is documented in section 9.6.5 of the USB 2.0 specification. * All multiple-byte fields are represented in host-endian format. */ struct libusb_interface_descriptor { /** Size of this descriptor (in bytes) */ uint8_t bLength; /** Descriptor type. Will have value * \ref libusb_descriptor_type::LIBUSB_DT_INTERFACE LIBUSB_DT_INTERFACE * in this context. */ uint8_t bDescriptorType; /** Number of this interface */ uint8_t bInterfaceNumber; /** Value used to select this alternate setting for this interface */ uint8_t bAlternateSetting; /** Number of endpoints used by this interface (excluding the control * endpoint). */ uint8_t bNumEndpoints; /** USB-IF class code for this interface. See \ref libusb_class_code. */ uint8_t bInterfaceClass; /** USB-IF subclass code for this interface, qualified by the * bInterfaceClass value */ uint8_t bInterfaceSubClass; /** USB-IF protocol code for this interface, qualified by the * bInterfaceClass and bInterfaceSubClass values */ uint8_t bInterfaceProtocol; /** Index of string descriptor describing this interface */ uint8_t iInterface; /** Array of endpoint descriptors. This length of this array is determined * by the bNumEndpoints field. */ const struct libusb_endpoint_descriptor *endpoint; /** Extra descriptors. If libusb encounters unknown interface descriptors, * it will store them here, should you wish to parse them. */ const unsigned char *extra; /** Length of the extra descriptors, in bytes. */ int extra_length; }; /** \ingroup desc * A collection of alternate settings for a particular USB interface. */ struct libusb_interface { /** Array of interface descriptors. The length of this array is determined * by the num_altsetting field. */ const struct libusb_interface_descriptor *altsetting; /** The number of alternate settings that belong to this interface */ int num_altsetting; }; /** \ingroup desc * A structure representing the standard USB configuration descriptor. This * descriptor is documented in section 9.6.3 of the USB 2.0 specification. * All multiple-byte fields are represented in host-endian format. */ struct libusb_config_descriptor { /** Size of this descriptor (in bytes) */ uint8_t bLength; /** Descriptor type. Will have value * \ref libusb_descriptor_type::LIBUSB_DT_CONFIG LIBUSB_DT_CONFIG * in this context. */ uint8_t bDescriptorType; /** Total length of data returned for this configuration */ uint16_t wTotalLength; /** Number of interfaces supported by this configuration */ uint8_t bNumInterfaces; /** Identifier value for this configuration */ uint8_t bConfigurationValue; /** Index of string descriptor describing this configuration */ uint8_t iConfiguration; /** Configuration characteristics */ uint8_t bmAttributes; /** Maximum power consumption of the USB device from this bus in this * configuration when the device is fully opreation. Expressed in units * of 2 mA. */ uint8_t MaxPower; /** Array of interfaces supported by this configuration. The length of * this array is determined by the bNumInterfaces field. */ const struct libusb_interface *interface; /** Extra descriptors. If libusb encounters unknown configuration * descriptors, it will store them here, should you wish to parse them. */ const unsigned char *extra; /** Length of the extra descriptors, in bytes. */ int extra_length; }; /** \ingroup asyncio * Setup packet for control transfers. */ struct libusb_control_setup { /** Request type. Bits 0:4 determine recipient, see * \ref libusb_request_recipient. Bits 5:6 determine type, see * \ref libusb_request_type. Bit 7 determines data transfer direction, see * \ref libusb_endpoint_direction. */ uint8_t bmRequestType; /** Request. If the type bits of bmRequestType are equal to * \ref libusb_request_type::LIBUSB_REQUEST_TYPE_STANDARD * "LIBUSB_REQUEST_TYPE_STANDARD" then this field refers to * \ref libusb_standard_request. For other cases, use of this field is * application-specific. */ uint8_t bRequest; /** Value. Varies according to request */ uint16_t wValue; /** Index. Varies according to request, typically used to pass an index * or offset */ uint16_t wIndex; /** Number of bytes to transfer */ uint16_t wLength; }; #define LIBUSB_CONTROL_SETUP_SIZE (sizeof(struct libusb_control_setup)) /* libusb */ struct libusb_context; struct libusb_device; struct libusb_device_handle; /** \ingroup lib * Structure representing a libusb session. The concept of individual libusb * sessions allows for your program to use two libraries (or dynamically * load two modules) which both independently use libusb. This will prevent * interference between the individual libusb users - for example * libusb_set_debug() will not affect the other user of the library, and * libusb_exit() will not destroy resources that the other user is still * using. * * Sessions are created by libusb_init() and destroyed through libusb_exit(). * If your application is guaranteed to only ever include a single libusb * user (i.e. you), you do not have to worry about contexts: pass NULL in * every function call where a context is required. The default context * will be used. * * For more information, see \ref contexts. */ typedef struct libusb_context libusb_context; /** \ingroup dev * Structure representing a USB device detected on the system. This is an * opaque type for which you are only ever provided with a pointer, usually * originating from libusb_get_device_list(). * * Certain operations can be performed on a device, but in order to do any * I/O you will have to first obtain a device handle using libusb_open(). * * Devices are reference counted with libusb_device_ref() and * libusb_device_unref(), and are freed when the reference count reaches 0. * New devices presented by libusb_get_device_list() have a reference count of * 1, and libusb_free_device_list() can optionally decrease the reference count * on all devices in the list. libusb_open() adds another reference which is * later destroyed by libusb_close(). */ typedef struct libusb_device libusb_device; /** \ingroup dev * Structure representing a handle on a USB device. This is an opaque type for * which you are only ever provided with a pointer, usually originating from * libusb_open(). * * A device handle is used to perform I/O and other operations. When finished * with a device handle, you should call libusb_close(). */ typedef struct libusb_device_handle libusb_device_handle; /** \ingroup misc * Error codes. Most libusb functions return 0 on success or one of these * codes on failure. */ enum libusb_error { /** Success (no error) */ LIBUSB_SUCCESS = 0, /** Input/output error */ LIBUSB_ERROR_IO = -1, /** Invalid parameter */ LIBUSB_ERROR_INVALID_PARAM = -2, /** Access denied (insufficient permissions) */ LIBUSB_ERROR_ACCESS = -3, /** No such device (it may have been disconnected) */ LIBUSB_ERROR_NO_DEVICE = -4, /** Entity not found */ LIBUSB_ERROR_NOT_FOUND = -5, /** Resource busy */ LIBUSB_ERROR_BUSY = -6, /** Operation timed out */ LIBUSB_ERROR_TIMEOUT = -7, /** Overflow */ LIBUSB_ERROR_OVERFLOW = -8, /** Pipe error */ LIBUSB_ERROR_PIPE = -9, /** System call interrupted (perhaps due to signal) */ LIBUSB_ERROR_INTERRUPTED = -10, /** Insufficient memory */ LIBUSB_ERROR_NO_MEM = -11, /** Operation not supported or unimplemented on this platform */ LIBUSB_ERROR_NOT_SUPPORTED = -12, /** Other error */ LIBUSB_ERROR_OTHER = -99 }; /** \ingroup asyncio * Transfer status codes */ enum libusb_transfer_status { /** Transfer completed without error. Note that this does not indicate * that the entire amount of requested data was transferred. */ LIBUSB_TRANSFER_COMPLETED, /** Transfer failed */ LIBUSB_TRANSFER_ERROR, /** Transfer timed out */ LIBUSB_TRANSFER_TIMED_OUT, /** Transfer was cancelled */ LIBUSB_TRANSFER_CANCELLED, /** For bulk/interrupt endpoints: halt condition detected (endpoint * stalled). For control endpoints: control request not supported. */ LIBUSB_TRANSFER_STALL, /** Device was disconnected */ LIBUSB_TRANSFER_NO_DEVICE, /** Device sent more data than requested */ LIBUSB_TRANSFER_OVERFLOW }; /** \ingroup asyncio * libusb_transfer.flags values */ enum libusb_transfer_flags { /** Report short frames as errors */ LIBUSB_TRANSFER_SHORT_NOT_OK = 1<<0, /** Automatically free() transfer buffer during libusb_free_transfer() */ LIBUSB_TRANSFER_FREE_BUFFER = 1<<1, /** Automatically call libusb_free_transfer() after callback returns. * If this flag is set, it is illegal to call libusb_free_transfer() * from your transfer callback, as this will result in a double-free * when this flag is acted upon. */ LIBUSB_TRANSFER_FREE_TRANSFER = 1<<2 }; /** \ingroup asyncio * Isochronous packet descriptor. */ struct libusb_iso_packet_descriptor { /** Length of data to request in this packet */ unsigned int length; /** Amount of data that was actually transferred */ unsigned int actual_length; /** Status code for this packet */ enum libusb_transfer_status status; }; struct libusb_transfer; /** \ingroup asyncio * Asynchronous transfer callback function type. When submitting asynchronous * transfers, you pass a pointer to a callback function of this type via the * \ref libusb_transfer::callback "callback" member of the libusb_transfer * structure. libusb will call this function later, when the transfer has * completed or failed. See \ref asyncio for more information. * \param transfer The libusb_transfer struct the callback function is being * notified about. */ typedef void (*libusb_transfer_cb_fn)(struct libusb_transfer *transfer); /** \ingroup asyncio * The generic USB transfer structure. The user populates this structure and * then submits it in order to request a transfer. After the transfer has * completed, the library populates the transfer with the results and passes * it back to the user. */ struct libusb_transfer { /** Handle of the device that this transfer will be submitted to */ libusb_device_handle *dev_handle; /** A bitwise OR combination of \ref libusb_transfer_flags. */ uint8_t flags; /** Address of the endpoint where this transfer will be sent. */ unsigned char endpoint; /** Type of the endpoint from \ref libusb_transfer_type */ unsigned char type; /** Timeout for this transfer in millseconds. A value of 0 indicates no * timeout. */ unsigned int timeout; /** The status of the transfer. Read-only, and only for use within * transfer callback function. * * If this is an isochronous transfer, this field may read COMPLETED even * if there were errors in the frames. Use the * \ref libusb_iso_packet_descriptor::status "status" field in each packet * to determine if errors occurred. */ enum libusb_transfer_status status; /** Length of the data buffer */ int length; /** Actual length of data that was transferred. Read-only, and only for * use within transfer callback function. Not valid for isochronous * endpoint transfers. */ int actual_length; /** Callback function. This will be invoked when the transfer completes, * fails, or is cancelled. */ libusb_transfer_cb_fn callback; /** User context data to pass to the callback function. */ void *user_data; /** Data buffer */ unsigned char *buffer; /** Number of isochronous packets. Only used for I/O with isochronous * endpoints. */ int num_iso_packets; /** Isochronous packet descriptors, for isochronous transfers only. */ struct libusb_iso_packet_descriptor iso_packet_desc #if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) [] /* valid C99 code */ #else [0] /* non-standard, but usually working code */ #endif ; }; int libusb_init(libusb_context **ctx); void libusb_exit(libusb_context *ctx); void libusb_set_debug(libusb_context *ctx, int level); ssize_t libusb_get_device_list(libusb_context *ctx, libusb_device ***list); void libusb_free_device_list(libusb_device **list, int unref_devices); libusb_device *libusb_ref_device(libusb_device *dev); void libusb_unref_device(libusb_device *dev); int libusb_get_configuration(libusb_device_handle *dev, int *config); int libusb_get_device_descriptor(libusb_device *dev, struct libusb_device_descriptor *desc); int libusb_get_active_config_descriptor(libusb_device *dev, struct libusb_config_descriptor **config); int libusb_get_config_descriptor(libusb_device *dev, uint8_t config_index, struct libusb_config_descriptor **config); int libusb_get_config_descriptor_by_value(libusb_device *dev, uint8_t bConfigurationValue, struct libusb_config_descriptor **config); void libusb_free_config_descriptor(struct libusb_config_descriptor *config); uint8_t libusb_get_bus_number(libusb_device *dev); uint8_t libusb_get_device_address(libusb_device *dev); int libusb_get_max_packet_size(libusb_device *dev, unsigned char endpoint); int libusb_get_max_iso_packet_size(libusb_device *dev, unsigned char endpoint); int libusb_open(libusb_device *dev, libusb_device_handle **handle); void libusb_close(libusb_device_handle *dev_handle); libusb_device *libusb_get_device(libusb_device_handle *dev_handle); int libusb_set_configuration(libusb_device_handle *dev, int configuration); int libusb_claim_interface(libusb_device_handle *dev, int iface); int libusb_release_interface(libusb_device_handle *dev, int iface); libusb_device_handle *libusb_open_device_with_vid_pid(libusb_context *ctx, uint16_t vendor_id, uint16_t product_id); int libusb_set_interface_alt_setting(libusb_device_handle *dev, int interface_number, int alternate_setting); int libusb_clear_halt(libusb_device_handle *dev, unsigned char endpoint); int libusb_reset_device(libusb_device_handle *dev); int libusb_kernel_driver_active(libusb_device_handle *dev, int interface); int libusb_detach_kernel_driver(libusb_device_handle *dev, int interface); int libusb_attach_kernel_driver(libusb_device_handle *dev, int interface); /* async I/O */ /** \ingroup asyncio * Get the data section of a control transfer. This convenience function is here * to remind you that the data does not start until 8 bytes into the actual * buffer, as the setup packet comes first. * * Calling this function only makes sense from a transfer callback function, * or situations where you have already allocated a suitably sized buffer at * transfer->buffer. * * \param transfer a transfer * \returns pointer to the first byte of the data section */ static inline unsigned char *libusb_control_transfer_get_data( struct libusb_transfer *transfer) { return transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE; } /** \ingroup asyncio * Get the control setup packet of a control transfer. This convenience * function is here to remind you that the control setup occupies the first * 8 bytes of the transfer data buffer. * * Calling this function only makes sense from a transfer callback function, * or situations where you have already allocated a suitably sized buffer at * transfer->buffer. * * \param transfer a transfer * \returns a casted pointer to the start of the transfer data buffer */ static inline struct libusb_control_setup *libusb_control_transfer_get_setup( struct libusb_transfer *transfer) { return (struct libusb_control_setup *) transfer->buffer; } /** \ingroup asyncio * Helper function to populate the setup packet (first 8 bytes of the data * buffer) for a control transfer. The wIndex, wValue and wLength values should * be given in host-endian byte order. * * \param buffer buffer to output the setup packet into * \param bmRequestType see the * \ref libusb_control_setup::bmRequestType "bmRequestType" field of * \ref libusb_control_setup * \param bRequest see the * \ref libusb_control_setup::bRequest "bRequest" field of * \ref libusb_control_setup * \param wValue see the * \ref libusb_control_setup::wValue "wValue" field of * \ref libusb_control_setup * \param wIndex see the * \ref libusb_control_setup::wIndex "wIndex" field of * \ref libusb_control_setup * \param wLength see the * \ref libusb_control_setup::wLength "wLength" field of * \ref libusb_control_setup */ static inline void libusb_fill_control_setup(unsigned char *buffer, uint8_t bmRequestType, uint8_t bRequest, uint16_t wValue, uint16_t wIndex, uint16_t wLength) { struct libusb_control_setup *setup = (struct libusb_control_setup *) buffer; setup->bmRequestType = bmRequestType; setup->bRequest = bRequest; setup->wValue = libusb_cpu_to_le16(wValue); setup->wIndex = libusb_cpu_to_le16(wIndex); setup->wLength = libusb_cpu_to_le16(wLength); } struct libusb_transfer *libusb_alloc_transfer(int iso_packets); int libusb_submit_transfer(struct libusb_transfer *transfer); int libusb_cancel_transfer(struct libusb_transfer *transfer); void libusb_free_transfer(struct libusb_transfer *transfer); /** \ingroup asyncio * Helper function to populate the required \ref libusb_transfer fields * for a control transfer. * * If you pass a transfer buffer to this function, the first 8 bytes will * be interpreted as a control setup packet, and the wLength field will be * used to automatically populate the \ref libusb_transfer::length "length" * field of the transfer. Therefore the recommended approach is: * -# Allocate a suitably sized data buffer (including space for control setup) * -# Call libusb_fill_control_setup() * -# If this is a host-to-device transfer with a data stage, put the data * in place after the setup packet * -# Call this function * -# Call libusb_submit_transfer() * * It is also legal to pass a NULL buffer to this function, in which case this * function will not attempt to populate the length field. Remember that you * must then populate the buffer and length fields later. * * \param transfer the transfer to populate * \param dev_handle handle of the device that will handle the transfer * \param buffer data buffer. If provided, this function will interpret the * first 8 bytes as a setup packet and infer the transfer length from that. * \param callback callback function to be invoked on transfer completion * \param user_data user data to pass to callback function * \param timeout timeout for the transfer in milliseconds */ static inline void libusb_fill_control_transfer( struct libusb_transfer *transfer, libusb_device_handle *dev_handle, unsigned char *buffer, libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout) { struct libusb_control_setup *setup = (struct libusb_control_setup *) buffer; transfer->dev_handle = dev_handle; transfer->endpoint = 0; transfer->type = LIBUSB_TRANSFER_TYPE_CONTROL; transfer->timeout = timeout; transfer->buffer = buffer; if (setup) transfer->length = LIBUSB_CONTROL_SETUP_SIZE + libusb_le16_to_cpu(setup->wLength); transfer->user_data = user_data; transfer->callback = callback; } /** \ingroup asyncio * Helper function to populate the required \ref libusb_transfer fields * for a bulk transfer. * * \param transfer the transfer to populate * \param dev_handle handle of the device that will handle the transfer * \param endpoint address of the endpoint where this transfer will be sent * \param buffer data buffer * \param length length of data buffer * \param callback callback function to be invoked on transfer completion * \param user_data user data to pass to callback function * \param timeout timeout for the transfer in milliseconds */ static inline void libusb_fill_bulk_transfer(struct libusb_transfer *transfer, libusb_device_handle *dev_handle, unsigned char endpoint, unsigned char *buffer, int length, libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout) { transfer->dev_handle = dev_handle; transfer->endpoint = endpoint; transfer->type = LIBUSB_TRANSFER_TYPE_BULK; transfer->timeout = timeout; transfer->buffer = buffer; transfer->length = length; transfer->user_data = user_data; transfer->callback = callback; } /** \ingroup asyncio * Helper function to populate the required \ref libusb_transfer fields * for an interrupt transfer. * * \param transfer the transfer to populate * \param dev_handle handle of the device that will handle the transfer * \param endpoint address of the endpoint where this transfer will be sent * \param buffer data buffer * \param length length of data buffer * \param callback callback function to be invoked on transfer completion * \param user_data user data to pass to callback function * \param timeout timeout for the transfer in milliseconds */ static inline void libusb_fill_interrupt_transfer( struct libusb_transfer *transfer, libusb_device_handle *dev_handle, unsigned char endpoint, unsigned char *buffer, int length, libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout) { transfer->dev_handle = dev_handle; transfer->endpoint = endpoint; transfer->type = LIBUSB_TRANSFER_TYPE_INTERRUPT; transfer->timeout = timeout; transfer->buffer = buffer; transfer->length = length; transfer->user_data = user_data; transfer->callback = callback; } /** \ingroup asyncio * Helper function to populate the required \ref libusb_transfer fields * for an isochronous transfer. * * \param transfer the transfer to populate * \param dev_handle handle of the device that will handle the transfer * \param endpoint address of the endpoint where this transfer will be sent * \param buffer data buffer * \param length length of data buffer * \param num_iso_packets the number of isochronous packets * \param callback callback function to be invoked on transfer completion * \param user_data user data to pass to callback function * \param timeout timeout for the transfer in milliseconds */ static inline void libusb_fill_iso_transfer(struct libusb_transfer *transfer, libusb_device_handle *dev_handle, unsigned char endpoint, unsigned char *buffer, int length, int num_iso_packets, libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout) { transfer->dev_handle = dev_handle; transfer->endpoint = endpoint; transfer->type = LIBUSB_TRANSFER_TYPE_ISOCHRONOUS; transfer->timeout = timeout; transfer->buffer = buffer; transfer->length = length; transfer->num_iso_packets = num_iso_packets; transfer->user_data = user_data; transfer->callback = callback; } /** \ingroup asyncio * Convenience function to set the length of all packets in an isochronous * transfer, based on the num_iso_packets field in the transfer structure. * * \param transfer a transfer * \param length the length to set in each isochronous packet descriptor * \see libusb_get_max_packet_size() */ static inline void libusb_set_iso_packet_lengths( struct libusb_transfer *transfer, unsigned int length) { int i; for (i = 0; i < transfer->num_iso_packets; i++) transfer->iso_packet_desc[i].length = length; } /** \ingroup asyncio * Convenience function to locate the position of an isochronous packet * within the buffer of an isochronous transfer. * * This is a thorough function which loops through all preceding packets, * accumulating their lengths to find the position of the specified packet. * Typically you will assign equal lengths to each packet in the transfer, * and hence the above method is sub-optimal. You may wish to use * libusb_get_iso_packet_buffer_simple() instead. * * \param transfer a transfer * \param packet the packet to return the address of * \returns the base address of the packet buffer inside the transfer buffer, * or NULL if the packet does not exist. * \see libusb_get_iso_packet_buffer_simple() */ static inline unsigned char *libusb_get_iso_packet_buffer( struct libusb_transfer *transfer, unsigned int packet) { int i; size_t offset = 0; int _packet; /* oops..slight bug in the API. packet is an unsigned int, but we use * signed integers almost everywhere else. range-check and convert to * signed to avoid compiler warnings. FIXME for libusb-2. */ if (packet > INT_MAX) return NULL; _packet = packet; if (_packet >= transfer->num_iso_packets) return NULL; for (i = 0; i < _packet; i++) offset += transfer->iso_packet_desc[i].length; return transfer->buffer + offset; } /** \ingroup asyncio * Convenience function to locate the position of an isochronous packet * within the buffer of an isochronous transfer, for transfers where each * packet is of identical size. * * This function relies on the assumption that every packet within the transfer * is of identical size to the first packet. Calculating the location of * the packet buffer is then just a simple calculation: * buffer + (packet_size * packet) * * Do not use this function on transfers other than those that have identical * packet lengths for each packet. * * \param transfer a transfer * \param packet the packet to return the address of * \returns the base address of the packet buffer inside the transfer buffer, * or NULL if the packet does not exist. * \see libusb_get_iso_packet_buffer() */ static inline unsigned char *libusb_get_iso_packet_buffer_simple( struct libusb_transfer *transfer, unsigned int packet) { int _packet; /* oops..slight bug in the API. packet is an unsigned int, but we use * signed integers almost everywhere else. range-check and convert to * signed to avoid compiler warnings. FIXME for libusb-2. */ if (packet > INT_MAX) return NULL; _packet = packet; if (_packet >= transfer->num_iso_packets) return NULL; return transfer->buffer + (transfer->iso_packet_desc[0].length * _packet); } /* sync I/O */ int libusb_control_transfer(libusb_device_handle *dev_handle, uint8_t request_type, uint8_t request, uint16_t value, uint16_t index, unsigned char *data, uint16_t length, unsigned int timeout); int libusb_bulk_transfer(libusb_device_handle *dev_handle, unsigned char endpoint, unsigned char *data, int length, int *actual_length, unsigned int timeout); int libusb_interrupt_transfer(libusb_device_handle *dev_handle, unsigned char endpoint, unsigned char *data, int length, int *actual_length, unsigned int timeout); /** \ingroup desc * Retrieve a descriptor from the default control pipe. * This is a convenience function which formulates the appropriate control * message to retrieve the descriptor. * * \param dev a device handle * \param desc_type the descriptor type, see \ref libusb_descriptor_type * \param desc_index the index of the descriptor to retrieve * \param data output buffer for descriptor * \param length size of data buffer * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure */ static inline int libusb_get_descriptor(libusb_device_handle *dev, uint8_t desc_type, uint8_t desc_index, unsigned char *data, int length) { return libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN, LIBUSB_REQUEST_GET_DESCRIPTOR, (desc_type << 8) | desc_index, 0, data, length, 1000); } /** \ingroup desc * Retrieve a descriptor from a device. * This is a convenience function which formulates the appropriate control * message to retrieve the descriptor. The string returned is Unicode, as * detailed in the USB specifications. * * \param dev a device handle * \param desc_index the index of the descriptor to retrieve * \param langid the language ID for the string descriptor * \param data output buffer for descriptor * \param length size of data buffer * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure * \see libusb_get_string_descriptor_ascii() */ static inline int libusb_get_string_descriptor(libusb_device_handle *dev, uint8_t desc_index, uint16_t langid, unsigned char *data, int length) { return libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN, LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_STRING << 8) | desc_index, langid, data, length, 1000); } int libusb_get_string_descriptor_ascii(libusb_device_handle *dev, uint8_t index, unsigned char *data, int length); /* polling and timeouts */ int libusb_try_lock_events(libusb_context *ctx); void libusb_lock_events(libusb_context *ctx); void libusb_unlock_events(libusb_context *ctx); int libusb_event_handling_ok(libusb_context *ctx); int libusb_event_handler_active(libusb_context *ctx); void libusb_lock_event_waiters(libusb_context *ctx); void libusb_unlock_event_waiters(libusb_context *ctx); int libusb_wait_for_event(libusb_context *ctx, struct timeval *tv); int libusb_handle_events_timeout(libusb_context *ctx, struct timeval *tv); int libusb_handle_events(libusb_context *ctx); int libusb_handle_events_locked(libusb_context *ctx, struct timeval *tv); int libusb_pollfds_handle_timeouts(libusb_context *ctx); int libusb_get_next_timeout(libusb_context *ctx, struct timeval *tv); /** \ingroup poll * File descriptor for polling */ struct libusb_pollfd { /** Numeric file descriptor */ int fd; /** Event flags to poll for from . POLLIN indicates that you * should monitor this file descriptor for becoming ready to read from, * and POLLOUT indicates that you should monitor this file descriptor for * nonblocking write readiness. */ short events; }; /** \ingroup poll * Callback function, invoked when a new file descriptor should be added * to the set of file descriptors monitored for events. * \param fd the new file descriptor * \param events events to monitor for, see \ref libusb_pollfd for a * description * \param user_data User data pointer specified in * libusb_set_pollfd_notifiers() call * \see libusb_set_pollfd_notifiers() */ typedef void (*libusb_pollfd_added_cb)(int fd, short events, void *user_data); /** \ingroup poll * Callback function, invoked when a file descriptor should be removed from * the set of file descriptors being monitored for events. After returning * from this callback, do not use that file descriptor again. * \param fd the file descriptor to stop monitoring * \param user_data User data pointer specified in * libusb_set_pollfd_notifiers() call * \see libusb_set_pollfd_notifiers() */ typedef void (*libusb_pollfd_removed_cb)(int fd, void *user_data); const struct libusb_pollfd **libusb_get_pollfds(libusb_context *ctx); void libusb_set_pollfd_notifiers(libusb_context *ctx, libusb_pollfd_added_cb added_cb, libusb_pollfd_removed_cb removed_cb, void *user_data); #ifdef __cplusplus } #endif #endif