- replace old default config with my config from opensuse. #2203

git-svn-id: svn://svn.lighttpd.net/lighttpd/branches/lighttpd-1.4.x@2738 152afb58-edef-0310-8abb-c4023f1b3aa9

29 files changed, 1595 insertions, 322 deletions

diff --git a/doc/config/conf.d/access_log.conf b/doc/config/conf.d/access_log.conf
new file mode 100644
index 00000000..6c1e7e3c
--- /dev/null
+++ b/doc/config/conf.d/access_log.conf
@@ -0,0 +1,27 @@
+#######################################################################
+##
+## Corresponding documentation:
+##
+## http://www.lighttpd.net/documentation/access.html
+##
+server.modules += ( "mod_accesslog" )
+
+##
+## Default access log.
+##
+accesslog.filename          = log_root + "/access.log"
+
+##
+## The default format produces CLF compatible output.
+## For available parameters see access.txt 
+##
+#accesslog.format = "%h %l %u %t \"%r\" %b %>s \"%{User-Agent}i\" \"%{Referer}i\""
+
+##
+## If you want to log to syslog you have to unset the 
+## accesslog.use-syslog setting and uncomment the next line.
+##
+#accesslog.use-syslog       = "enable"
+
+#
+#######################################################################
diff --git a/doc/config/conf.d/auth.conf b/doc/config/conf.d/auth.conf
new file mode 100644
index 00000000..1d3d69c0
--- /dev/null
+++ b/doc/config/conf.d/auth.conf
@@ -0,0 +1,27 @@
+#######################################################################
+##
+##  Authentication Module
+## -----------------------
+##
+## See http://www.lighttpd.net/documentation/authentification.html
+## for more info.
+##
+
+#auth.backend                 = "plain"
+#auth.backend.plain.userfile  = "/etc/lighttpd/lighttpd.user"
+#auth.backend.plain.groupfile = "/etc/lighttpd/lighttpd.group"
+
+#auth.backend.ldap.hostname = "localhost"
+#auth.backend.ldap.base-dn  = "dc=my-domain,dc=com"
+#auth.backend.ldap.filter   = "(uid=$)"
+
+#auth.require               = ( "/server-status" =>
+#                               (
+#                                 "method"  => "digest",
+#                                 "realm"   => "Server Status",
+#                                 "require" => "valid-user"
+#                               ),
+#                             )
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/cgi.conf b/doc/config/conf.d/cgi.conf
new file mode 100644
index 00000000..ed277999
--- /dev/null
+++ b/doc/config/conf.d/cgi.conf
@@ -0,0 +1,33 @@
+#######################################################################
+##
+##  CGI modules
+## --------------- 
+##
+## http://www.lighttpd.net/documentation/cgi.html
+##
+server.modules += ( "mod_cgi" )
+
+##
+## Plain old CGI handling
+##
+## For PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini.
+##
+cgi.assign                 = ( ".pl"  => "/usr/bin/perl",
+                               ".cgi" => "/usr/bin/perl",
+                               ".rb"  => "/usr/bin/ruby",
+                               ".erb" => "/usr/bin/eruby",
+                               ".py"  => "/usr/bin/python" )
+
+##
+## to get the old cgi-bin behavior of apache
+##
+## Note: make sure that mod_alias is loaded if you uncomment the
+##       next line. (see modules.conf)
+##
+#alias.url += ( "/cgi-bin" => server_root + "/cgi-bin" )
+#$HTTP["url"] =~ "^/cgi-bin" {
+#   cgi.assign = ( "" => "" )
+#}
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/cml.conf b/doc/config/conf.d/cml.conf
new file mode 100644
index 00000000..8054ea63
--- /dev/null
+++ b/doc/config/conf.d/cml.conf
@@ -0,0 +1,27 @@
+#######################################################################
+##
+##  CML Module 
+## --------------- 
+##
+## see http://www.lighttpd.net/documentation/cml.html
+##
+server.modules += ( "mod_cml" )
+index-file.names += ( "index.cml" )
+
+##
+## The file extension that is bound to the cml-module.
+##
+cml.extension               = ".cml"
+
+##
+## Memcached hosts used for memcache* functions. 
+##
+#cml.memcache-hosts          = ( "127.0.0.1:11211" )
+
+##
+## A cml file that is executed for each request. 
+##
+#cml.power-magnet = server_root + "/htdocs/powermagnet.cml"
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/compress.conf b/doc/config/conf.d/compress.conf
new file mode 100644
index 00000000..8ea4248c
--- /dev/null
+++ b/doc/config/conf.d/compress.conf
@@ -0,0 +1,31 @@
+#######################################################################
+##
+##  Output Compression 
+## --------------------
+##
+## see http://www.lighttpd.net/documentation/compress.html
+##
+server.modules += ( "mod_compress" )
+
+##
+## where should the compressed files be cached?
+## see the base config for the declaration of the variable.
+##
+## This directory should be changed per vhost otherwise you can
+## run into trouble with overlapping filenames
+##
+compress.cache-dir         = cache_dir + "/compress"
+
+##
+## FileTypes to compress.
+## 
+compress.filetype          = ("text/plain", "text/html")
+
+##
+## Maximum filesize that will be compressed.
+## Default is 0, which means unlimited file size.
+## 
+#compress.max-filesize = 0
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/debug.conf b/doc/config/conf.d/debug.conf
new file mode 100644
index 00000000..80bbea00
--- /dev/null
+++ b/doc/config/conf.d/debug.conf
@@ -0,0 +1,47 @@
+#######################################################################
+##
+##  Debug options
+## ---------------
+##
+## Enable those options for debugging the behavior
+##
+## The settings can be set per location/vhost.
+## 
+
+## 
+## log-request-handling allows you to track the request
+## handing inside lighttpd. 
+##
+#debug.log-request-handling        = "enable"
+
+## 
+## log all request headers. 
+##
+#debug.log-request-header          = "enable"
+
+## 
+## similar to log-request-header.
+## but only logs if we encountered an error.
+## (return codes 400 and 5xx)
+##
+#debug.log-request-header-on-error = "enable"
+
+## 
+## log the header we send out to the client.
+##
+#debug.log-response-header         = "enable"
+
+## 
+## log if a file wasnt found in the error log.
+##
+#debug.log-file-not-found          = "enable"
+
+## 
+## debug conditionals handling
+##
+#debug.log-condition-handling      = "enable"
+
+#
+#######################################################################
+
+
diff --git a/doc/config/conf.d/dirlisting.conf b/doc/config/conf.d/dirlisting.conf
new file mode 100644
index 00000000..53a18a26
--- /dev/null
+++ b/doc/config/conf.d/dirlisting.conf
@@ -0,0 +1,55 @@
+#######################################################################
+##
+##  Dirlisting Module 
+## ------------------- 
+##
+## See http://www.lighttpd.net/documentation/dirlisting.html
+##
+
+##
+## Enabled Directory listing
+##
+dir-listing.activate      = "disable"
+
+##
+## Hide dot files from the listing?
+## By default they are listed.
+##
+dir-listing.hide-dotfiles = "disable" 
+
+##
+## list of regular expressions. Files that match any of the specified
+## regular expressions will be excluded from directory listings.
+##
+dir-listing.exclude       = ( "~$" )
+
+##
+## set a encoding for the generated directory listing
+##
+## If you file-system is not using ASCII you have to set the encoding of
+## the filenames as they are put into the HTML listing AS IS (with XML
+## encoding)
+##
+dir-listing.encoding = "UTF-8"
+
+##
+## Specify the url to an optional CSS file. 
+##
+#dir-listing.external-css  = "/dirindex.css"
+
+##
+## Include HEADER.txt files above the directory listing. 
+## You can disable showing the HEADER.txt in the listing. 
+##
+dir-listing.hide-header-file = "disable"
+dir-listing.show-header = "disable"
+
+##
+## Include README.txt files above the directory listing. 
+## You can disable showing the README.txt in the listing. 
+##
+dir-listing.hide-readme-file = "disable"
+dir-listing.show-readme = "disable"
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/evhost.conf b/doc/config/conf.d/evhost.conf
new file mode 100644
index 00000000..6da89c1f
--- /dev/null
+++ b/doc/config/conf.d/evhost.conf
@@ -0,0 +1,22 @@
+#######################################################################
+##
+##  Enhanced virtual hosting 
+## -------------------------- 
+##
+## See http://www.lighttpd.net/documentation/evhost.html
+##
+server.modules += ( "mod_evhost" )
+
+##
+## define a pattern for the host url finding
+## %% => % sign
+## %0 => domain name + tld
+## %1 => tld
+## %2 => domain name without tld
+## %3 => subdomain 1 name
+## %4 => subdomain 2 name
+##
+evhost.path-pattern        = vhosts_dir + "/%3/htdocs/"
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/expire.conf b/doc/config/conf.d/expire.conf
new file mode 100644
index 00000000..0ca0ab23
--- /dev/null
+++ b/doc/config/conf.d/expire.conf
@@ -0,0 +1,22 @@
+#######################################################################
+##
+##  Expire Module 
+## --------------- 
+##
+## See http://www.lighttpd.net/documentation/expire.html
+##
+server.modules += ( "mod_expire" )
+
+##
+##  assignes a expiration to all files below the specified path. The
+##  specification of the time is made up of:
+##
+##    <access|modification> <number> <years|months|days|hours|minutes|seconds>
+##    
+#expire.url = (
+#  "/buggy/"  => "access 2 hours",
+#  "/images/" => "access plus 1 seconds 2 minutes"
+#)
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/fastcgi.conf b/doc/config/conf.d/fastcgi.conf
new file mode 100644
index 00000000..49cff623
--- /dev/null
+++ b/doc/config/conf.d/fastcgi.conf
@@ -0,0 +1,135 @@
+#######################################################################
+##
+##  FastCGI Module 
+## --------------- 
+##
+## http://www.lighttpd.net/documentation/fastcgi.html
+##
+server.modules += ( "mod_fastcgi" )
+
+##
+## PHP Example
+## For PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini.
+##
+## The number of php processes you will get can be easily calculated:
+##
+## num-procs = max-procs * ( 1 + PHP_FCGI_CHILDREN )
+##
+## for the php-num-procs example it means you will get 17*5 = 85 php
+## processes. you always should need this high number for your very
+## busy sites. And if you have a lot of RAM. :)
+##
+#fastcgi.server = ( ".php" =>
+#                   ( "php-local" =>
+#                     (
+#                       "socket" => socket_dir + "/php-fastcgi-1.socket",
+#                       "bin-path" => server_root + "/cgi-bin/php5",
+#                       "max-procs" => 1,
+#                       "broken-scriptfilename" => "enable",
+#                     )
+#                   ),
+#                   ( "php-tcp" =>
+#                     (
+#                       "host" => "127.0.0.1",
+#                       "port" => 9999,
+#                       "check-local" => "disable",
+#                       "broken-scriptfilename" => "enable",
+#                     )
+#                   ),
+#
+#                   ( "php-num-procs" =>
+#                     (
+#                       "socket" => socket_dir + "/php-fastcgi-2.socket",
+#                       "bin-path" => server_root + "/cgi-bin/php5",
+#                       "bin-environment" => (
+#                         "PHP_FCGI_CHILDREN" => "16",
+#                         "PHP_FCGI_MAX_REQUESTS" => "10000",
+#                       ),
+#                       "max-procs" => 5,
+#                       "broken-scriptfilename" => "enable",
+#                     )
+#                   ),
+#                )
+
+##
+## Ruby on Rails Example
+##
+## Normally you only run one Rails application on one vhost.
+##
+#$HTTP["host"] == "rails1.example.com" {
+#  server.document-root  = server_root + "/rails/someapp/public"
+#  server.error-handler-404 = "/dispatch.fcgi"
+#  fastcgi.server = ( ".fcgi" =>
+#    ("someapp" =>
+#      ( "socket" => socket_dir + "/someapp-fcgi.socket",
+#        "bin-path" => server_root + "/rails/someapp/public/dispatch.fcgi",
+#        "bin-environment" => (
+#              "RAILS_ENV" => "production",
+#              "TMP" => home_dir + "/rails/someapp",
+#        ),
+#      )
+#    )
+#  )
+#}
+
+##
+## Another example with multiple rails applications on one vhost.
+##
+## http://blog.lighttpd.net/articles/2005/11/23/lighttpd-1-4-8-and-multiple-rails-apps
+##
+#$HTTP["host"] == "rails2.example.com" {
+#  $HTTP["url"] =~ "^/someapp1" {
+#    server.document-root  = server_root + "/rails/someapp1/public"
+#    server.error-handler-404 = "/dispatch.fcgi"
+#    fastcgi.server = ( ".fcgi" =>
+#      ("someapp1" =>
+#        ( "socket" => socket_dir + "/someapp1-fcgi.socket",
+#          "bin-path" => server_root + "/rails/someapp1/public/dispatch.fcgi",
+#          "bin-environment" => (
+#                "RAILS_ENV" => "production",
+#                "TMP" => home_dir + "/rails/someapp1",
+#          ),
+#          "strip-request-uri" => "/someapp1/"
+#        )
+#      )
+#    )
+#  }
+#
+#  $HTTP["url"] =~ "^/someapp2" {
+#    server.document-root  = server_root + "/rails/someapp2/public"
+#    server.error-handler-404 = "/dispatch.fcgi"
+#    fastcgi.server = ( ".fcgi" =>
+#      ("someapp2" =>
+#        ( "socket" => socket_dir + "/someapp2-fcgi.socket",
+#          "bin-path" => server_root + "/rails/someapp2/public/dispatch.fcgi",
+#          "bin-environment" => (
+#                "RAILS_ENV" => "production",
+#                "TMP" => home_dir + "/rails/someapp2",
+#          ),
+#          "strip-request-uri" => "/someapp2/"
+#        )
+#      )
+#    )
+#  }
+#}
+
+## chrooted webserver + external PHP
+##
+## $ spawn-fcgi -f /usr/bin/php-cgi -p 2000 -a 127.0.0.1 -C 8
+##
+## webserver chrooted to /srv/www/
+## php running outside the chroot
+#
+#fastcgi.server = ( 
+#  ".php" => (( 
+#    "host" => "127.0.0.1",
+#    "port" => "2000",
+#    "docroot" => "/srv/www/servers/www.example.org/htdocs/"
+#  )))
+#
+#server.chroot = "/srv/www"
+#server.document-root = "/servers/wwww.example.org/htdocs/"
+#
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/geoip.conf b/doc/config/conf.d/geoip.conf
new file mode 100644
index 00000000..5b5b28b6
--- /dev/null
+++ b/doc/config/conf.d/geoip.conf
@@ -0,0 +1,26 @@
+#######################################################################
+##
+##  GeoIP Module 
+## --------------- 
+##
+## mod_geoip is a module for fast ip/location lookups. It uses MaxMind
+## GeoIP / GeoCity databases. If the ip was found in the database the
+## module sets the appropriate environments variables to the request,
+## thus making other modules/fcgi be informed.
+##
+server.modules += ( "mod_geoip" )
+
+##
+## mod_geoip will determine the database type automatically so if you
+## enter GeoCity databse path it will load GeoCity Env.
+##
+#geoip.db-filename = "/path/to/GeoCityLite.dat"
+
+##
+## If enabled, mod_geoip will load the database binary file to memory
+## for very fast lookups. The only penalty is memory usage.
+##
+#geoip.memory-cache = "disable"
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/magnet.conf b/doc/config/conf.d/magnet.conf
new file mode 100644
index 00000000..1ebf529b
--- /dev/null
+++ b/doc/config/conf.d/magnet.conf
@@ -0,0 +1,22 @@
+#######################################################################
+##
+##  Magnet Module 
+## --------------- 
+##
+## see http://trac.lighttpd.net/trac/wiki/Docs%3AModMagnet
+##
+server.modules += ( "mod_magnet" )
+
+##
+##
+##
+#magnet.attract-raw-url-to = (  )
+
+##
+## as an example for that see the mod_magnet docs and
+## http://pixel.global-banlist.de./
+##
+#magnet.attract-physical-path-to = ( conf_dir + "/cleanurl.lua" )
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/mime.conf b/doc/config/conf.d/mime.conf
new file mode 100644
index 00000000..a3c6f0c3
--- /dev/null
+++ b/doc/config/conf.d/mime.conf
@@ -0,0 +1,77 @@
+#######################################################################
+##
+##  MimeType handling
+## -------------------
+##
+## http://www.lighttpd.net/documentation/configuration.html#mimetypes
+##
+## Use the "Content-Type" extended attribute to obtain mime type if
+## possible
+##
+mimetype.use-xattr        = "disable"
+
+##
+## mimetype mapping
+##
+mimetype.assign             = (
+  ".pdf"          =>      "application/pdf",
+  ".sig"          =>      "application/pgp-signature",
+  ".spl"          =>      "application/futuresplash",
+  ".class"        =>      "application/octet-stream",
+  ".ps"           =>      "application/postscript",
+  ".torrent"      =>      "application/x-bittorrent",
+  ".dvi"          =>      "application/x-dvi",
+  ".gz"           =>      "application/x-gzip",
+  ".pac"          =>      "application/x-ns-proxy-autoconfig",
+  ".swf"          =>      "application/x-shockwave-flash",
+  ".tar.gz"       =>      "application/x-tgz",
+  ".tgz"          =>      "application/x-tgz",
+  ".tar"          =>      "application/x-tar",
+  ".zip"          =>      "application/zip",
+  ".mp3"          =>      "audio/mpeg",
+  ".m3u"          =>      "audio/x-mpegurl",
+  ".wma"          =>      "audio/x-ms-wma",
+  ".wax"          =>      "audio/x-ms-wax",
+  ".ogg"          =>      "application/ogg",
+  ".wav"          =>      "audio/x-wav",
+  ".gif"          =>      "image/gif",
+  ".jpg"          =>      "image/jpeg",
+  ".jpeg"         =>      "image/jpeg",
+  ".png"          =>      "image/png",
+  ".xbm"          =>      "image/x-xbitmap",
+  ".xpm"          =>      "image/x-xpixmap",
+  ".xwd"          =>      "image/x-xwindowdump",
+  ".css"          =>      "text/css",
+  ".html"         =>      "text/html",
+  ".htm"          =>      "text/html",
+  ".js"           =>      "text/javascript",
+  ".asc"          =>      "text/plain",
+  ".c"            =>      "text/plain",
+  ".cpp"          =>      "text/plain",
+  ".log"          =>      "text/plain",
+  ".conf"         =>      "text/plain",
+  ".text"         =>      "text/plain",
+  ".txt"          =>      "text/plain",
+  ".spec"         =>      "text/plain",
+  ".dtd"          =>      "text/xml",
+  ".xml"          =>      "text/xml",
+  ".mpeg"         =>      "video/mpeg",
+  ".mpg"          =>      "video/mpeg",
+  ".mov"          =>      "video/quicktime",
+  ".qt"           =>      "video/quicktime",
+  ".avi"          =>      "video/x-msvideo",
+  ".asf"          =>      "video/x-ms-asf",
+  ".asx"          =>      "video/x-ms-asf",
+  ".wmv"          =>      "video/x-ms-wmv",
+  ".bz2"          =>      "application/x-bzip",
+  ".tbz"          =>      "application/x-bzip-compressed-tar",
+  ".tar.bz2"      =>      "application/x-bzip-compressed-tar",
+  ".rpm"          =>      "application/x-rpm",
+  # make the default mime type application/octet-stream.
+  ""              =>      "application/octet-stream",
+ )
+
+
+#
+#######################################################################
+
diff --git a/doc/config/conf.d/mod.template b/doc/config/conf.d/mod.template
new file mode 100644
index 00000000..fcfdac48
--- /dev/null
+++ b/doc/config/conf.d/mod.template
@@ -0,0 +1,16 @@
+#######################################################################
+##
+##  Foo Module 
+## --------------- 
+##
+## http://www.lighttpd.net/documentation/Foo.html
+##
+server.modules += ( "mod_Foo" )
+
+##
+## foo
+##
+#foo.bar = 1
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/mysql_vhost.conf b/doc/config/conf.d/mysql_vhost.conf
new file mode 100644
index 00000000..63550c4e
--- /dev/null
+++ b/doc/config/conf.d/mysql_vhost.conf
@@ -0,0 +1,47 @@
+#######################################################################
+##
+##  Virtual hosting with MySQL 
+## ----------------------------
+##
+## http://www.lighttpd.net/documentation/mysqlvhost.html
+##
+server.modules += ( "mod_mysql_vhost" )
+
+## 
+## Either set the the socket or host (and port)
+##
+## Local path to the mysql socket
+##
+#mysql-vhost.sock           = "/var/lib/mysql/mysql.sock"
+
+##
+## Host of the MySQL server. 
+##
+#mysql-vhost.hostname       = "localhost"
+
+##
+## Optional: port to use.
+##
+#mysql-vhost.port           = 3306
+
+##
+## Name of the database
+##
+mysql-vhost.db             = "lighttpd"
+
+##
+## SQL User/Password for the connection 
+##
+mysql-vhost.user           = "lighttpd"
+mysql-vhost.pass           = "secret"
+
+##
+## The query to get the needed informations from the database.
+##
+## It doesnt matter how you name the fields the first field is always used
+## as the document root.
+##
+mysql-vhost.sql            = "SELECT docroot FROM domains WHERE domain='?'"
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/proxy.conf b/doc/config/conf.d/proxy.conf
new file mode 100644
index 00000000..f0552c21
--- /dev/null
+++ b/doc/config/conf.d/proxy.conf
@@ -0,0 +1,35 @@
+#######################################################################
+##
+##  Proxy Module 
+## --------------- 
+##
+## http://www.lighttpd.net/documentation/proxy.html
+##
+server.modules += ( "mod_proxy" )
+
+##
+## a value between 0 and 65535 to set the debug-level in the Proxy module.
+## Currently only 0 and 1 are used. Use 1 to enable some debug output, 0 to
+## disable it. 
+##
+#proxy.debug = 1
+
+##  
+## might be one of 'hash', 'round-robin' or 'fair' (default).
+##  
+#proxy.balance = "fair"
+  
+##
+## Handle all jsp requests via 192.168.0.101
+##
+#proxy.server = ( ".jsp" =>
+#                 ( "tomcat" =>
+#                   (
+#                     "host" => "192.168.0.101",
+#                     "port" => 80
+#                   )
+#                 )
+#               )
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/rrdtool.conf b/doc/config/conf.d/rrdtool.conf
new file mode 100644
index 00000000..c29013bd
--- /dev/null
+++ b/doc/config/conf.d/rrdtool.conf
@@ -0,0 +1,21 @@
+#######################################################################
+##
+##  RRD Tool Module 
+## ----------------- 
+##
+## see http://www.lighttpd.net/documentation/rrdtool.html
+##
+server.modules += ( "mod_rrdtool" )
+
+##
+## Path to the rrdtool binary.
+##
+rrdtool.binary             = "/usr/bin/rrdtool"
+
+##
+## Path to the rrdtool database. You can override this in conditionals.
+##
+rrdtool.db-name            = "/var/lib/lighttpd/lighttpd.rrd"
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/scgi.conf b/doc/config/conf.d/scgi.conf
new file mode 100644
index 00000000..3fcf280f
--- /dev/null
+++ b/doc/config/conf.d/scgi.conf
@@ -0,0 +1,51 @@
+#######################################################################
+##
+##  FastCGI Module 
+## --------------- 
+##
+## http://www.lighttpd.net/documentation/scgi.html
+##
+server.modules += ( "mod_scgi" )
+
+##
+## Ruby on Rails Example
+##
+## Normally you only run one Rails application on one vhost.
+##
+#$HTTP["host"] == "rails1.example.com" {
+#  server.document-root  = server_root + "/rails/someapp/public"
+#  server.error-handler-404 = "/dispatch.fcgi"
+#  scgi.server = ( ".scgi" =>
+#    ("scgi-someapp" =>
+#      ( "socket" => socket_dir + "/someapp-scgi.socket",
+#        "bin-path" => server_root + "/rails/someapp/public/dispatch.scgi",
+#        "bin-environment" => (
+#              "RAILS_ENV" => "production",
+#              "TMP" => home_dir + "/rails/someapp",
+#        ),
+#      )
+#    )
+#  )
+#}
+
+##
+## 2nd Ruby on Rails Example
+##
+## This time we launch the rails application via scgi_rails externally. 
+##
+#$HTTP["host"] == "rails2.example.com" {
+#  server.document-root  = server_root + "/rails/someapp/public"
+#  server.error-handler-404 = "/dispatch.scgi"
+#  scgi.server = ( ".scgi" =>
+#    ( "scgi-tcp" =>
+#      (
+#        "host" => "127.0.0.1",
+#        "port" => 9998,
+#        "check-local" => "disable",
+#      )
+#    )
+#  )
+#}
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/secdownload.conf b/doc/config/conf.d/secdownload.conf
new file mode 100644
index 00000000..2d4d11a8
--- /dev/null
+++ b/doc/config/conf.d/secdownload.conf
@@ -0,0 +1,35 @@
+#######################################################################
+##
+##  Secure Download Module 
+## ------------------------ 
+##
+## see http://www.lighttpd.net/documentation/secdownload.html
+##
+server.modules += ( "mod_secdownload" )
+
+##
+## Document root for the download area.
+## The directory should not be below your normal 
+## document root! 
+##
+#secdownload.document-root = server_root + "/downloads"
+
+##
+## Secret string that will be used for the checksum calculation.
+##
+#secdownload.secret = ""
+
+##
+## How long is the secret valid?
+##
+## Default: 60 seconds
+##
+#secdownload.timeout = 60
+
+##
+## Prefix for the download area. 
+##
+#secdownload.uri-prefix = "/download/"
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/simple_vhost.conf b/doc/config/conf.d/simple_vhost.conf
new file mode 100644
index 00000000..220331e0
--- /dev/null
+++ b/doc/config/conf.d/simple_vhost.conf
@@ -0,0 +1,28 @@
+#######################################################################
+##
+##  Simple Virtual hosting 
+## ------------------------ 
+##
+## http://www.lighttpd.net/documentation/simple-vhost.html
+##
+server.modules += ( "mod_simple_vhost" )
+
+##  If you want name-based virtual hosting add the next three settings and load
+##  mod_simple_vhost
+##
+## document-root =
+##   virtual-server-root + virtual-server-default-host + virtual-server-docroot
+## or
+##   virtual-server-root + http-host + virtual-server-docroot
+##
+simple-vhost.server-root   = vhosts_dir + "/"
+simple-vhost.default-host  = "default.example.com"
+simple-vhost.document-root = "/htdocs/"
+
+##
+## Print some errors for finding the document-root
+##
+#simple-vhost.debug = "enable"
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/ssi.conf b/doc/config/conf.d/ssi.conf
new file mode 100644
index 00000000..a82d1a5b
--- /dev/null
+++ b/doc/config/conf.d/ssi.conf
@@ -0,0 +1,16 @@
+#######################################################################
+##
+##  Server Side Includes 
+## -----------------------
+##
+## see /usr/share/doc/packages/lighttpd/ssi.html
+##
+server.modules += ( "mod_ssi" )
+
+##
+## which extensions should be ran through mod_ssi.
+##
+ssi.extension              = ( ".shtml" )
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/status.conf b/doc/config/conf.d/status.conf
new file mode 100644
index 00000000..946939f4
--- /dev/null
+++ b/doc/config/conf.d/status.conf
@@ -0,0 +1,24 @@
+#######################################################################
+##
+##  Status Module 
+## --------------- 
+##
+## see http://www.lighttpd.net/documentation/status.html
+##
+server.modules += ( "mod_status" )
+
+$HTTP["remoteip"] == "127.0.0.0/8" {
+##
+## configure urls for the various parts of the module. 
+##
+  status.status-url          = "/server-status"
+  status.config-url          = "/server-config"
+  status.statistics-url      = "/server-statistics"
+##
+## add JavaScript which allows client-side sorting for the connection
+## overview 
+##
+  status.enable-sort         = "enable"
+}
+##
+#######################################################################
diff --git a/doc/config/conf.d/trigger_b4_dl.conf b/doc/config/conf.d/trigger_b4_dl.conf
new file mode 100644
index 00000000..1efd3fdb
--- /dev/null
+++ b/doc/config/conf.d/trigger_b4_dl.conf
@@ -0,0 +1,70 @@
+#######################################################################
+##
+##  Trigger before download 
+## --------------- 
+##
+## - if user requests ''download-url'' directly, the request is denied
+##   and he is redirected to ''deny-url'
+## - if user visits ''trigger-url'' before requesting ''download-url'',
+##   access is granted
+## - if user visits ''download-url'' again after ''trigger-timeout'' has
+##   elapsed, the request is denied and he is redirected to ''deny-url''
+##
+## http://www.lighttpd.net/documentation/trigger_b4_dl.html
+##
+server.modules += ( "mod_mod_trigger_b4_dl" )
+
+##
+## To store the trigger state you can either use a local GDBM
+## file or memcached(s). 
+##
+
+##
+## Path to the local GDBM file.
+##
+trigger-before-download.gdbm-filename = home_dir + "/trigger.db"
+
+##
+## List of memcached servers.
+##
+#trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
+
+##
+## URL prefix a visitor has to visit before downloading is allowed 
+##
+trigger-before-download.trigger-url = "^/trigger/"
+
+##
+## URL Prefix of the proteced area.
+##
+trigger-before-download.download-url = "^/download/"
+
+##
+## 
+## The deny url.
+##
+trigger-before-download.deny-url = "http://www.example.com/index.html"
+
+##
+## How long the "ticket" of the user will be valid.
+##
+## Value in seconds.
+##
+trigger-before-download.trigger-timeout = 10
+
+##
+## Normally the memcached key will be the remote ip of the request
+## If you store other data in the memcached aswell and want to avoid
+## key collisions you can configure a memcache-namespace.
+##
+## The key for the request will be memcache-namespace + remote_ip than.
+##
+#trigger-before-download.memcache-namespace = "t4bdl_"
+
+##
+## If set to 1, the module will log some debug informations.
+##
+#trigger-before-download.debug = 0
+
+##
+#######################################################################
diff --git a/doc/config/conf.d/userdir.conf b/doc/config/conf.d/userdir.conf
new file mode 100644
index 00000000..1e3691e1
--- /dev/null
+++ b/doc/config/conf.d/userdir.conf
@@ -0,0 +1,37 @@
+#######################################################################
+##
+##  Userdir Module 
+## ----------------
+##
+## for all details see:
+##   http://www.lighttpd.net/documentation/userdir.html
+##
+server.modules += ( "mod_userdir" )
+
+##
+## usually it should be set to "public_html" to take ~/public_html/ as
+## the document root
+## Default: empty (document root is the home directory)
+##
+userdir.path = "public_html"
+
+##
+## If set, don't check /etc/passwd for homedir
+## Default: empty
+#userdir.basepath = server_root + "/users/"
+
+##
+## list of usernames which may not use this feature
+## Default: empty (all users may use it)
+##
+#userdir.exclude-user = ( "root", "postmaster" )
+
+##
+## if set, only users from this list may use the feature
+## Default: empty (all users may use it) 
+##
+#userdir.include-user = ("user1", "user2")
+
+##
+#######################################################################
+
diff --git a/doc/config/conf.d/webdav.conf b/doc/config/conf.d/webdav.conf
new file mode 100644
index 00000000..2c373357
--- /dev/null
+++ b/doc/config/conf.d/webdav.conf
@@ -0,0 +1,33 @@
+#######################################################################
+##
+##  WebDAV Module
+## ---------------
+##
+## http://www.lighttpd.net/documentation/webdav.html
+##
+server.modules += ( "mod_webdav" )
+
+$HTTP["url"] =~ "^/dav($|/)" {
+  ##
+  ## enable webdav for this location
+  ##
+  webdav.activate = "enable"
+
+  ##
+  ## By default the webdav url is writable.
+  ## Uncomment the following line if you want to make it readonly.
+  ##
+  #webdav.is-readonly = "enable"
+
+  ##
+  ## Log the XML Request bodies for debugging
+  ##
+  #webdav.log-xml = "disable"
+
+  ##
+  ##  
+  ##
+  webdav.sqlite-db-name = home_dir + "/webdav.db"
+}
+##
+#######################################################################
diff --git a/doc/config/lighttpd.conf b/doc/config/lighttpd.conf
new file mode 100644
index 00000000..efe96be4
--- /dev/null
+++ b/doc/config/lighttpd.conf
@@ -0,0 +1,426 @@
+#######################################################################
+##
+## /etc/lighttpd/lighttpd.conf
+##
+## check /etc/lighttpd/conf.d/*.conf for the configuration of modules.
+##
+#######################################################################
+
+#######################################################################
+##
+## Some Variable definition which will make chrooting easier.
+##
+## if you add a variable here. Add the corresponding variable in the
+## chroot example aswell.
+##
+var.log_root    = "/var/log/lighttpd"
+var.server_root = "/srv/www"
+var.state_dir   = "/var/run"
+var.home_dir    = "/var/lib/lighttpd"
+var.conf_dir    = "/etc/lighttpd"
+
+## 
+## run the server chrooted.
+## 
+## This requires root permissions during startup.
+##
+## If you run Chrooted set the the variables to directories relative to
+## the chroot dir.
+##
+## example chroot configuration:
+## 
+#var.log_root    = "/logs"
+#var.server_root = "/"
+#var.state_dir   = "/run"
+#var.home_dir    = "/lib/lighttpd"
+#var.vhosts_dir  = "/vhosts"
+#var.conf_dir    = "/etc"
+#
+#server.chroot   = "/srv/www"
+
+##
+## Some additional variables to make the configuration easier
+##
+
+##
+## Base directory for all virtual hosts
+##
+## used in:
+## conf.d/evhost.conf
+## conf.d/simple_vhost.conf
+## vhosts.d/vhosts.template
+##
+var.vhosts_dir  = server_root + "/vhosts"
+
+##
+## Cache for mod_compress
+##
+## used in:
+## conf.d/compress.conf
+##
+var.cache_dir   = "/var/cache/lighttpd"
+
+##
+## Base directory for sockets.
+##
+## used in:
+## conf.d/fastcgi.conf
+## conf.d/scgi.conf
+##
+var.socket_dir  = home_dir + "/sockets"
+
+##
+#######################################################################
+
+#######################################################################
+##
+## Load the modules.
+include "modules.conf"
+
+##
+#######################################################################
+
+#######################################################################
+##
+##  Basic Configuration
+## ---------------------
+##
+server.port = 80
+
+##
+## Use IPv6?
+##
+server.use-ipv6 = "enable"
+
+##
+## bind to a specific IP
+##
+#server.bind = "localhost"
+
+##
+## Run as a different username/groupname.
+## This requires root permissions during startup. 
+##
+server.username  = "lighttpd"
+server.groupname = "lighttpd"
+
+## 
+## enable core files.
+##
+#server.core-files = "disable"
+
+##
+## Document root
+##
+server.document-root = server_root + "/htdocs"
+
+##
+## The value for the "Server:" response field.
+##
+## It would be nice to keep it at "lighttpd".
+##
+#server.tag = "lighttpd"
+
+##
+## store a pid file
+##
+server.pid-file = state_dir + "/lighttpd.pid"
+
+##
+#######################################################################
+
+#######################################################################
+##
+##  Logging Options
+## ------------------
+##
+## all logging options can be overwritten per vhost.
+##
+## Path to the error log file
+##
+server.errorlog             = log_root + "/error.log"
+
+##
+## If you want to log to syslog you have to unset the 
+## server.errorlog setting and uncomment the next line.
+##
+#server.errorlog-use-syslog = "enable"
+
+##
+## Access log config
+## 
+include "conf.d/access_log.conf"
+
+##
+## The debug options are moved into their own file.
+## see conf.d/debug.conf for various options for request debugging.
+##
+include "conf.d/debug.conf"
+
+##
+#######################################################################
+
+#######################################################################
+##
+##  Tuning/Performance
+## --------------------
+##
+## corresponding documentation:
+## http://www.lighttpd.net/documentation/performance.html
+##
+## set the event-handler (read the performance section in the manual)
+##
+## possible options on linux are:
+##
+## select
+## poll
+## linux-sysepoll
+##
+## linux-sysepoll is recommended on kernel 2.6.
+##
+server.event-handler = "linux-sysepoll"
+
+##
+## The basic network interface for all platforms at the syscalls read()
+## and write(). Every modern OS provides its own syscall to help network
+## servers transfer files as fast as possible 
+##
+## linux-sendfile - is recommended for small files.
+## writev         - is recommended for sending many large files
+##
+server.network-backend = "linux-sendfile"
+
+##
+## As lighttpd is a single-threaded server, its main resource limit is
+## the number of file descriptors, which is set to 1024 by default (on
+## most systems).
+##
+## If you are running a high-traffic site you might want to increase this
+## limit by setting server.max-fds.
+##
+## Changing this setting requires root permissions on startup. see
+## server.username/server.groupname.
+##
+## By default lighttpd would not change the operation system default.
+## But setting it to 2048 is a better default for busy servers.
+##
+server.max-fds = 2048
+
+##
+## Stat() call caching.
+##
+## lighttpd can utilize FAM/Gamin to cache stat call.
+##
+## possible values are:
+## disable, simple or fam.
+##
+server.stat-cache-engine = "simple"
+
+##
+## Fine tuning for the request handling
+##
+## max-connections == max-fds/2 (maybe /3)
+## means the other file handles are used for fastcgi/files
+##
+server.max-connections = 1024
+
+##
+## How many seconds to keep a keep-alive connection open,
+## until we consider it idle. 
+##
+## Default: 5
+##
+#server.max-keep-alive-idle = 5
+
+##
+## How many keep-alive requests until closing the connection.
+##
+## Default: 16
+##
+#server.max-keep-alive-requests = 16
+
+##
+## Maximum size of a request in kilobytes.
+## By default it is unlimited (0).
+##
+## Uploads to your server cant be larger than this value.
+##
+#server.max-request-size = 0
+
+##
+## Time to read from a socket before we consider it idle.
+##
+## Default: 60
+##
+#server.max-read-idle = 60
+
+##
+## Time to write to a socket before we consider it idle.
+##
+## Default: 360
+##
+#server.max-write-idle = 360
+
+##
+##  Traffic Shaping 
+## -----------------
+##
+## see /usr/share/doc/lighttpd/traffic-shaping.txt
+##
+## Values are in kilobyte per second.
+##
+## Keep in mind that a limit below 32kB/s might actually limit the
+## traffic to 32kB/s. This is caused by the size of the TCP send
+## buffer. 
+##
+## per server:
+##
+#server.kbytes-per-second = 128
+
+##
+## per connection:
+##
+#connection.kbytes-per-second = 32
+
+##
+#######################################################################
+
+#######################################################################
+##
+##  Filename/File handling
+## ------------------------
+
+##
+## files to check for if .../ is requested
+## index-file.names            = ( "index.php", "index.rb", "index.html",
+##                                 "index.htm", "default.htm" )
+##
+index-file.names += (
+  "index.xhtml", "index.html", "index.htm", "default.htm", "index.php"
+)
+
+##
+## deny access the file-extensions
+##
+## ~    is for backupfiles from vi, emacs, joe, ...
+## .inc is often used for code includes which should in general not be part
+##      of the document-root
+url.access-deny             = ( "~", ".inc" )
+
+##
+## disable range requests for pdf files
+## workaround for a bug in the Acrobat Reader plugin.
+##
+$HTTP["url"] =~ "\.pdf$" {
+  server.range-requests = "disable"
+}
+
+##
+## url handling modules (rewrite, redirect)
+##
+#url.rewrite                = ( "^/$"             => "/server-status" )
+#url.redirect               = ( "^/wishlist/(.+)" => "http://www.example.com/$1" )
+
+##
+## both rewrite/redirect support back reference to regex conditional using %n
+##
+#$HTTP["host"] =~ "^www\.(.*)" {
+#  url.redirect            = ( "^/(.*)" => "http://%1/$1" )
+#}
+
+##
+## which extensions should not be handle via static-file transfer
+##
+## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
+##
+static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" )
+
+##
+## error-handler for status 404
+##
+#server.error-handler-404   = "/error-handler.html"
+#server.error-handler-404   = "/error-handler.php"
+
+##
+## Format: <errorfile-prefix><status-code>.html
+## -> ..../status-404.html for 'File not found'
+##
+#server.errorfile-prefix    = "/srv/www/htdocs/errors/status-"
+
+##
+## mimetype mapping
+##
+include "conf.d/mime.conf"
+
+##
+## directory listing configuration
+##
+include "conf.d/dirlisting.conf"
+
+##
+## Should lighttpd follow symlinks?
+## 
+server.follow-symlink = "enable"
+
+##
+## force all filenames to be lowercase?
+##
+#server.force-lowercase-filenames = "disable"
+
+##
+## defaults to /var/tmp as we assume it is a local harddisk
+##
+server.upload-dirs = ( "/var/tmp" )
+
+##
+#######################################################################
+
+
+#######################################################################
+##
+##  SSL Support
+## ------------- 
+##
+## To enable SSL for the whole server you have to provide a valid
+## certificate and have to enable the SSL engine.::
+##
+##   ssl.engine = "enable"
+##   ssl.pemfile = "/path/to/server.pem"
+##
+## The HTTPS protocol does not allow you to use name-based virtual
+## hosting with SSL. If you want to run multiple SSL servers with
+## one lighttpd instance you must use IP-based virtual hosting: ::
+##
+##   $SERVER["socket"] == "10.0.0.1:443" {
+##     ssl.engine                  = "enable"
+##     ssl.pemfile                 = "/etc/ssl/private/www.example.com.pem"
+##     server.name                 = "www.example.com"
+##
+##     server.document-root        = "/srv/www/vhosts/example.com/www/"
+##   }
+##
+
+## If you have a .crt and a .key file, cat them together into a
+## single PEM file:
+## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \
+##   > /etc/ssl/private/lighttpd.pem
+##
+#ssl.pemfile = "/etc/ssl/private/lighttpd.pem"
+
+##
+## optionally pass the CA certificate here.
+##
+##
+#ssl.ca-file = ""
+
+##
+#######################################################################
+
+#######################################################################
+##
+## custom includes like vhosts.
+##
+#include "conf.d/config.conf"
+#include_shell "cat /etc/lighttpd/vhosts.d/*.conf"
+##
+#######################################################################
diff --git a/doc/config/modules.conf b/doc/config/modules.conf
new file mode 100644
index 00000000..99a3c3f8
--- /dev/null
+++ b/doc/config/modules.conf
@@ -0,0 +1,172 @@
+#######################################################################
+##
+##  Modules to load
+## -----------------
+##
+## at least mod_access and mod_accesslog should be loaded
+## all other module should only be loaded if really neccesary
+##
+## - saves some time
+## - saves memory
+##
+## the default module set contains:
+##
+## "mod_indexfile", "mod_dirlisting", "mod_staticfile"
+##
+## you dont have to include those modules in your list
+##
+## Modules, which are pulled in via conf.d/*.conf
+##
+## NOTE: the order of modules is important.
+##
+## - mod_accesslog     -> conf.d/access_log.conf
+## - mod_compress      -> conf.d/compress.conf
+## - mod_status        -> conf.d/status.conf
+## - mod_webdav        -> conf.d/webdav.conf
+## - mod_cml           -> conf.d/cml.conf
+## - mod_evhost        -> conf.d/evhost.conf
+## - mod_simple_vhost  -> conf.d/simple_vhost.conf
+## - mod_mysql_vhost   -> conf.d/mysql_vhost.conf
+## - mod_trigger_b4_dl -> conf.d/trigger_b4_dl.conf
+## - mod_userdir       -> conf.d/userdir.conf
+## - mod_rrdtool       -> conf.d/rrdtool.conf
+## - mod_ssi           -> conf.d/ssi.conf
+## - mod_cgi           -> conf.d/cgi.conf
+## - mod_scgi          -> conf.d/scgi.conf
+## - mod_fastcgi       -> conf.d/fastcgi.conf
+## - mod_proxy         -> conf.d/proxy.conf
+## - mod_secdownload   -> conf.d/secdownload.conf
+## - mod_expire        -> conf.d/expire.conf
+##
+
+server.modules = (
+  "mod_access",
+#  "mod_alias",
+#  "mod_auth",
+#  "mod_evasive",
+#  "mod_redirect",
+#  "mod_rewrite",
+#  "mod_setenv",
+#  "mod_usertrack",
+)
+
+##
+#######################################################################
+
+#######################################################################
+##
+##  Config for various Modules
+##
+
+##
+## mod_ssi
+##
+#include "conf.d/ssi.conf"
+
+##
+## mod_status
+##
+#include "conf.d/status.conf"
+
+##
+## mod_webdav
+##
+#include "conf.d/webdav.conf"
+
+##
+## mod_compress
+##
+#include "conf.d/compress.conf"
+
+##
+## mod_userdir
+##
+#include "conf.d/userdir.conf"
+
+##
+## mod_magnet
+##
+#include "conf.d/magnet.conf"
+
+##
+## mod_cml
+##
+#include "conf.d/cml.conf"
+
+##
+## mod_rrdtool
+##
+#include "conf.d/rrdtool.conf"
+
+##
+## mod_proxy
+##
+#include "conf.d/proxy.conf"
+
+##
+## mod_expire
+##
+#include "conf.d/expire.conf"
+
+##
+## mod_secdownload
+##
+#include "conf.d/secdownload.conf"
+
+##
+#######################################################################
+
+#######################################################################
+##
+## CGI modules
+##
+
+##
+## SCGI (mod_scgi)
+##
+#include "conf.d/scgi.conf"
+
+##
+## FastCGI (mod_fastcgi)
+##
+#include "conf.d/fastcgi.conf"
+
+##
+## plain old CGI (mod_cgi)
+##
+#include "conf.d/cgi.conf"
+
+##
+#######################################################################
+
+#######################################################################
+##
+## VHost Modules
+##
+##  Only load ONE of them!
+## ========================
+##
+
+##
+## You can use conditionals for vhosts aswell.
+## 
+## see http://www.lighttpd.net/documentation/configuration.html
+##
+
+##
+## mod_evhost
+##
+#include "conf.d/evhost.conf"
+
+##
+## mod_simple_vhost
+##
+#include "conf.d/simple_vhost.conf"
+
+##
+## mod_mysql_vhost
+##
+#include "conf.d/mysql_vhost.conf"
+
+##
+#######################################################################
diff --git a/doc/config/vhosts.d/vhosts.template b/doc/config/vhosts.d/vhosts.template
new file mode 100644
index 00000000..2c443aa5
--- /dev/null
+++ b/doc/config/vhosts.d/vhosts.template
@@ -0,0 +1,33 @@
+#######################################################################
+##
+## For more examples check:
+##
+## http://www.lighttpd.net/documentation/configuration.html#conditional-configuration
+##
+$HTTP["host"] == "download.example.com" {
+  var.server_name = "download.example.com"
+
+  server.name = server_name
+  ##
+  ## use trigger before download
+  ## 
+  include "conf.d/trigger_b4_dl.conf"
+
+  server.document-root = vhosts_dir + "/example.com/download/htdocs"
+  ##
+  ## use a seperate access log file
+  ## At the moment you cant have different error log files.
+  ##
+  accesslog.filename          = log_root + "/" + server_name "/access.log"
+}
+
+$SERVER["socket"] == "127.0.0.1:443" {
+  server.name = "localhost"
+  ssl.pemfile = "/etc/ssl/private/lighttpd-localhost.pem"
+  ssl.engine  = "enable"
+
+  server.document-root = vhosts_dir + "/ssl-localhost/pages/"
+}
+
+##
+#######################################################################
diff --git a/doc/lighttpd.conf b/doc/lighttpd.conf
deleted file mode 100644
index a3a641f7..00000000
--- a/doc/lighttpd.conf
+++ /dev/null
@@ -1,322 +0,0 @@
-# lighttpd configuration file
-#
-# use it as a base for lighttpd 1.0.0 and above
-#
-# $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
-
-############ Options you really have to take care of ####################
-
-## modules to load
-# at least mod_access and mod_accesslog should be loaded
-# all other module should only be loaded if really neccesary
-# - saves some time
-# - saves memory
-server.modules              = (
-#                               "mod_rewrite",
-#                               "mod_redirect",
-#                               "mod_alias",
-                                "mod_access",
-#                               "mod_trigger_b4_dl",
-#                               "mod_auth",
-#                               "mod_status",
-#                               "mod_setenv",
-#                               "mod_fastcgi",
-#                               "mod_proxy",
-#                               "mod_simple_vhost",
-#                               "mod_evhost",
-#                               "mod_userdir",
-#                               "mod_cgi",
-#                               "mod_compress",
-#                               "mod_ssi",
-#                               "mod_usertrack",
-#                               "mod_expire",
-#                               "mod_secdownload",
-#                               "mod_rrdtool",
-                                "mod_accesslog" )
-
-## A static document-root. For virtual hosting take a look at the
-## mod_simple_vhost module.
-server.document-root        = "/srv/www/htdocs/"
-
-## where to send error-messages to
-server.errorlog             = "/var/log/lighttpd/error.log"
-
-# files to check for if .../ is requested
-index-file.names            = ( "index.php", "index.html",
-                                "index.htm", "default.htm" )
-
-## set the event-handler (read the performance section in the manual)
-# server.event-handler = "freebsd-kqueue" # needed on OS X
-
-# mimetype mapping
-mimetype.assign             = (
-  ".pdf"          =>      "application/pdf",
-  ".sig"          =>      "application/pgp-signature",
-  ".spl"          =>      "application/futuresplash",
-  ".class"        =>      "application/octet-stream",
-  ".ps"           =>      "application/postscript",
-  ".torrent"      =>      "application/x-bittorrent",
-  ".dvi"          =>      "application/x-dvi",
-  ".gz"           =>      "application/x-gzip",
-  ".pac"          =>      "application/x-ns-proxy-autoconfig",
-  ".swf"          =>      "application/x-shockwave-flash",
-  ".tar.gz"       =>      "application/x-tgz",
-  ".tgz"          =>      "application/x-tgz",
-  ".tar"          =>      "application/x-tar",
-  ".zip"          =>      "application/zip",
-  ".mp3"          =>      "audio/mpeg",
-  ".m3u"          =>      "audio/x-mpegurl",
-  ".wma"          =>      "audio/x-ms-wma",
-  ".wax"          =>      "audio/x-ms-wax",
-  ".ogg"          =>      "application/ogg",
-  ".wav"          =>      "audio/x-wav",
-  ".gif"          =>      "image/gif",
-  ".jar"          =>      "application/x-java-archive",
-  ".jpg"          =>      "image/jpeg",
-  ".jpeg"         =>      "image/jpeg",
-  ".png"          =>      "image/png",
-  ".xbm"          =>      "image/x-xbitmap",
-  ".xpm"          =>      "image/x-xpixmap",
-  ".xwd"          =>      "image/x-xwindowdump",
-  ".css"          =>      "text/css",
-  ".html"         =>      "text/html",
-  ".htm"          =>      "text/html",
-  ".js"           =>      "text/javascript",
-  ".asc"          =>      "text/plain",
-  ".c"            =>      "text/plain",
-  ".cpp"          =>      "text/plain",
-  ".log"          =>      "text/plain",
-  ".conf"         =>      "text/plain",
-  ".text"         =>      "text/plain",
-  ".txt"          =>      "text/plain",
-  ".dtd"          =>      "text/xml",
-  ".xml"          =>      "text/xml",
-  ".mpeg"         =>      "video/mpeg",
-  ".mpg"          =>      "video/mpeg",
-  ".mov"          =>      "video/quicktime",
-  ".qt"           =>      "video/quicktime",
-  ".avi"          =>      "video/x-msvideo",
-  ".asf"          =>      "video/x-ms-asf",
-  ".asx"          =>      "video/x-ms-asf",
-  ".wmv"          =>      "video/x-ms-wmv",
-  ".bz2"          =>      "application/x-bzip",
-  ".tbz"          =>      "application/x-bzip-compressed-tar",
-  ".tar.bz2"      =>      "application/x-bzip-compressed-tar",
-  # default mime type
-  ""              =>      "application/octet-stream",
- )
-
-# Use the "Content-Type" extended attribute to obtain mime type if possible
-#mimetype.use-xattr        = "enable"
-
-
-## send a different Server: header
-## be nice and keep it at lighttpd
-# server.tag                 = "lighttpd"
-
-#### accesslog module
-accesslog.filename          = "/var/log/lighttpd/access.log"
-
-## deny access the file-extensions
-#
-# ~    is for backupfiles from vi, emacs, joe, ...
-# .inc is often used for code includes which should in general not be part
-#      of the document-root
-url.access-deny             = ( "~", ".inc" )
-
-$HTTP["url"] =~ "\.pdf$" {
-  server.range-requests = "disable"
-}
-
-##
-# which extensions should not be handle via static-file transfer
-#
-# .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
-static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
-
-######### Options that are good to be but not neccesary to be changed #######
-
-## bind to port (default: 80)
-#server.port                = 81
-
-## bind to localhost (default: all interfaces)
-#server.bind                = "127.0.0.1"
-
-## error-handler for status 404
-#server.error-handler-404   = "/error-handler.html"
-#server.error-handler-404   = "/error-handler.php"
-
-## to help the rc.scripts
-#server.pid-file            = "/var/run/lighttpd.pid"
-
-
-###### virtual hosts
-##
-##  If you want name-based virtual hosting add the next three settings and load
-##  mod_simple_vhost
-##
-## document-root =
-##   virtual-server-root + virtual-server-default-host + virtual-server-docroot
-## or
-##   virtual-server-root + http-host + virtual-server-docroot
-##
-#simple-vhost.server-root   = "/srv/www/vhosts/"
-#simple-vhost.default-host  = "www.example.org"
-#simple-vhost.document-root = "/htdocs/"
-
-
-##
-## Format: <errorfile-prefix><status-code>.html
-## -> ..../status-404.html for 'File not found'
-#server.errorfile-prefix    = "/usr/share/lighttpd/errors/status-"
-#server.errorfile-prefix    = "/srv/www/errors/status-"
-
-## virtual directory listings
-#dir-listing.activate       = "enable"
-## select encoding for directory listings
-#dir-listing.encoding        = "utf-8"
-
-## enable debugging
-#debug.log-request-header   = "enable"
-#debug.log-response-header  = "enable"
-#debug.log-request-handling = "enable"
-#debug.log-file-not-found   = "enable"
-
-### only root can use these options
-#
-# chroot() to directory (default: no chroot() )
-#server.chroot              = "/"
-
-## change uid to <uid> (default: don't care)
-#server.username            = "wwwrun"
-
-## change uid to <uid> (default: don't care)
-#server.groupname           = "wwwrun"
-
-#### compress module
-#compress.cache-dir         = "/var/cache/lighttpd/compress/"
-#compress.filetype          = ("text/plain", "text/html")
-
-#### proxy module
-## read proxy.txt for more info
-#proxy.server               = ( ".php" =>
-#                               ( "localhost" =>
-#                                 (
-#                                   "host" => "192.168.0.101",
-#                                   "port" => 80
-#                                 )
-#                               )
-#                             )
-
-#### fastcgi module
-## read fastcgi.txt for more info
-## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
-#fastcgi.server             = ( ".php" =>
-#                               ( "localhost" =>
-#                                 (
-#                                   "socket" => "/var/run/lighttpd/php-fastcgi.socket",
-#                                   "bin-path" => "/usr/local/bin/php-cgi"
-#                                 )
-#                               )
-#                            )
-
-#### CGI module
-#cgi.assign                 = ( ".pl"  => "/usr/bin/perl",
-#                               ".cgi" => "/usr/bin/perl" )
-#
-
-#### SSL engine
-#ssl.engine                 = "enable"
-#ssl.pemfile                = "/etc/ssl/private/lighttpd.pem"
-
-#### status module
-#status.status-url          = "/server-status"
-#status.config-url          = "/server-config"
-
-#### auth module
-## read authentication.txt for more info
-#auth.backend               = "plain"
-#auth.backend.plain.userfile = "lighttpd.user"
-#auth.backend.plain.groupfile = "lighttpd.group"
-
-#auth.backend.ldap.hostname = "localhost"
-#auth.backend.ldap.base-dn  = "dc=my-domain,dc=com"
-#auth.backend.ldap.filter   = "(uid=$)"
-
-#auth.require               = ( "/server-status" =>
-#                               (
-#                                 "method"  => "digest",
-#                                 "realm"   => "download archiv",
-#                                 "require" => "user=jan"
-#                               ),
-#                               "/server-config" =>
-#                               (
-#                                 "method"  => "digest",
-#                                 "realm"   => "download archiv",
-#                                 "require" => "valid-user"
-#                               )
-#                             )
-
-#### url handling modules (rewrite, redirect, access)
-#url.rewrite                = ( "^/$"             => "/server-status" )
-#url.redirect               = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
-#### both rewrite/redirect support back reference to regex conditional using %n
-#$HTTP["host"] =~ "^www\.(.*)" {
-#  url.redirect            = ( "^/(.*)" => "http://%1/$1" )
-#}
-
-#
-# define a pattern for the host url finding
-# %% => % sign
-# %0 => domain name + tld
-# %1 => tld
-# %2 => domain name without tld
-# %3 => subdomain 1 name
-# %4 => subdomain 2 name
-#
-#evhost.path-pattern        = "/srv/www/vhosts/%3/htdocs/"
-
-#### expire module
-#expire.url                 = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
-
-#### ssi
-#ssi.extension              = ( ".shtml" )
-
-#### rrdtool
-#rrdtool.binary             = "/usr/bin/rrdtool"
-#rrdtool.db-name            = "/var/lib/lighttpd/lighttpd.rrd"
-
-#### setenv
-#setenv.add-request-header  = ( "TRAV_ENV" => "mysql://user@host/db" )
-#setenv.add-response-header = ( "X-Secret-Message" => "42" )
-
-## for mod_trigger_b4_dl
-# trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
-# trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
-# trigger-before-download.trigger-url = "^/trigger/"
-# trigger-before-download.download-url = "^/download/"
-# trigger-before-download.deny-url = "http://127.0.0.1/index.html"
-# trigger-before-download.trigger-timeout = 10
-
-#### variable usage:
-## variable name without "." is auto prefixed by "var." and becomes "var.bar"
-#bar = 1
-#var.mystring = "foo"
-
-## integer add
-#bar += 1
-## string concat, with integer cast as string, result: "www.foo1.com"
-#server.name = "www." + mystring + var.bar + ".com"
-## array merge
-#index-file.names = (foo + ".php") + index-file.names
-#index-file.names += (foo + ".php")
-
-#### include
-#include /etc/lighttpd/lighttpd-inc.conf
-## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
-#include "lighttpd-inc.conf"
-
-#### include_shell
-#include_shell "echo var.a=1"
-## the above is same as:
-#var.a=1