summaryrefslogtreecommitdiff
path: root/Documentation/i2c
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2005-04-02 20:31:02 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2005-06-21 21:51:48 -0700
commitb3d5496ea5915fa4848fe307af9f7097f312e932 (patch)
treee358977311df194ebac13d57c5e8abf1a87bd65c /Documentation/i2c
parent2a5a68b840cbab31baab2d9b2e1e6de3b289ae1e (diff)
downloadlinux-next-b3d5496ea5915fa4848fe307af9f7097f312e932.tar.gz
[PATCH] I2C: Kill address ranges in non-sensors i2c chip drivers
Some months ago, you killed the address ranges mechanism from all sensors i2c chip drivers (both the module parameters and the in-code address lists). I think it was a very good move, as the ranges can easily be replaced by individual addresses, and this allowed for significant cleanups in the i2c core (let alone the impressive size shrink for all these drivers). Unfortunately you did not do the same for non-sensors i2c chip drivers. These need the address ranges even less, so we could get rid of the ranges here as well for another significant i2c core cleanup. Here comes a patch which does just that. Since the process is exactly the same as what you did for the other drivers set already, I did not split this one in parts. A documentation update is included. The change saves 308 bytes in the i2c core, and an average 1382 bytes for chip drivers which use I2C_CLIENT_INSMOD, 126 bytes for those which do not. This change is required if we want to merge the sensors and non-sensors i2c code (and we want to do this). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/Documentation/i2c/writing-clients ===================================================================
Diffstat (limited to 'Documentation/i2c')
-rw-r--r--Documentation/i2c/writing-clients62
1 files changed, 12 insertions, 50 deletions
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index ad27511e3c7d..f482dae81de3 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -171,45 +171,31 @@ The following lists are used internally:
normal_i2c: filled in by the module writer.
A list of I2C addresses which should normally be examined.
- normal_i2c_range: filled in by the module writer.
- A list of pairs of I2C addresses, each pair being an inclusive range of
- addresses which should normally be examined.
probe: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the address. These addresses are also probed, as if they
were in the 'normal' list.
- probe_range: insmod parameter.
- A list of triples. The first value is a bus number (-1 for any I2C bus),
- the second and third are addresses. These form an inclusive range of
- addresses that are also probed, as if they were in the 'normal' list.
ignore: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. These addresses are never probed.
This parameter overrules 'normal' and 'probe', but not the 'force' lists.
- ignore_range: insmod parameter.
- A list of triples. The first value is a bus number (-1 for any I2C bus),
- the second and third are addresses. These form an inclusive range of
- I2C addresses that are never probed.
- This parameter overrules 'normal' and 'probe', but not the 'force' lists.
force: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. A device is blindly assumed to be on
the given address, no probing is done.
-Fortunately, as a module writer, you just have to define the `normal'
-and/or `normal_range' parameters. The complete declaration could look
-like this:
+Fortunately, as a module writer, you just have to define the `normal_i2c'
+parameter. The complete declaration could look like this:
- /* Scan 0x20 to 0x2f, 0x37, and 0x40 to 0x4f */
- static unsigned short normal_i2c[] = { 0x37,I2C_CLIENT_END };
- static unsigned short normal_i2c_range[] = { 0x20, 0x2f, 0x40, 0x4f,
- I2C_CLIENT_END };
+ /* Scan 0x37, and 0x48 to 0x4f */
+ static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+ 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
-Note that you *have* to call the two defined variables `normal_i2c' and
-`normal_i2c_range', without any prefix!
+Note that you *have* to call the defined variable `normal_i2c',
+without any prefix!
Probing classes (sensors)
@@ -223,39 +209,17 @@ The following lists are used internally. They are all lists of integers.
normal_i2c: filled in by the module writer. Terminated by SENSORS_I2C_END.
A list of I2C addresses which should normally be examined.
- normal_i2c_range: filled in by the module writer. Terminated by
- SENSORS_I2C_END
- A list of pairs of I2C addresses, each pair being an inclusive range of
- addresses which should normally be examined.
normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END.
A list of ISA addresses which should normally be examined.
- normal_isa_range: filled in by the module writer. Terminated by
- SENSORS_ISA_END
- A list of triples. The first two elements are ISA addresses, being an
- range of addresses which should normally be examined. The third is the
- modulo parameter: only addresses which are 0 module this value relative
- to the first address of the range are actually considered.
probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second is the address. These
addresses are also probed, as if they were in the 'normal' list.
- probe_range: insmod parameter. Initialize this list with SENSORS_I2C_END
- values.
- A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second and third are addresses.
- These form an inclusive range of addresses that are also probed, as
- if they were in the 'normal' list.
ignore: insmod parameter. Initialize this list with SENSORS_I2C_END values.
A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second is the I2C address. These
addresses are never probed. This parameter overrules 'normal' and
'probe', but not the 'force' lists.
- ignore_range: insmod parameter. Initialize this list with SENSORS_I2C_END
- values.
- A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second and third are addresses.
- These form an inclusive range of I2C addresses that are never probed.
- This parameter overrules 'normal' and 'probe', but not the 'force' lists.
Also used is a list of pointers to sensors_force_data structures:
force_data: insmod parameters. A list, ending with an element of which
@@ -269,16 +233,14 @@ Also used is a list of pointers to sensors_force_data structures:
So we have a generic insmod variabled `force', and chip-specific variables
`force_CHIPNAME'.
-Fortunately, as a module writer, you just have to define the `normal'
-and/or `normal_range' parameters, and define what chip names are used.
+Fortunately, as a module writer, you just have to define the `normal_i2c'
+and `normal_isa' parameters, and define what chip names are used.
The complete declaration could look like this:
- /* Scan i2c addresses 0x20 to 0x2f, 0x37, and 0x40 to 0x4f
- static unsigned short normal_i2c[] = {0x37,SENSORS_I2C_END};
- static unsigned short normal_i2c_range[] = {0x20,0x2f,0x40,0x4f,
- SENSORS_I2C_END};
+ /* Scan i2c addresses 0x37, and 0x48 to 0x4f */
+ static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+ 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Scan ISA address 0x290 */
static unsigned int normal_isa[] = {0x0290,SENSORS_ISA_END};
- static unsigned int normal_isa_range[] = {SENSORS_ISA_END};
/* Define chips foo and bar, as well as all module parameters and things */
SENSORS_INSMOD_2(foo,bar);