ARM: remove sirf prima2/atlas platforms

The SiRF Prima2 and Atlas platform code was contributed by Cambridge
Silicon Radio (CSR) after aquiring the original SiRF company, and
maintained by Barry Song. CSR was subsequently acquired by Qualcomm,
who no longer have an interest in maintaining the SoC platform but
instead have released more recent SoCs for the same market in the
Snapdragon family.

As Barry is no longer working for the company, nobody else there
wants to maintain it, and there are no third-party users, the
best way forward seems to be to completely remove it.

Thanks to Barry for maintaining the platform for the past ten years.

Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/lkml/c969392572604b98bcb3be44048c3165@hisilicon.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 123 deletions

diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c
deleted file mode 100644
index 8f7bbb57fb20..000000000000
--- a/arch/arm/mach-prima2/platsmp.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * plat smp support for CSR Marco dual-core SMP SoCs
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-
-#include "common.h"
-
-static void __iomem *clk_base;
-
-static DEFINE_SPINLOCK(boot_lock);
-
-/* XXX prima2_pen_release is cargo culted code - DO NOT COPY XXX */
-volatile int prima2_pen_release = -1;
-
-static void sirfsoc_secondary_init(unsigned int cpu)
-{
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	prima2_pen_release = -1;
-	smp_wmb();
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-static const struct of_device_id clk_ids[]  = {
-	{ .compatible = "sirf,atlas7-clkc" },
-	{},
-};
-
-static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, clk_ids);
-	if (!np)
-		return -ENODEV;
-
-	clk_base = of_iomap(np, 0);
-	if (!clk_base)
-		return -ENOMEM;
-
-	/*
-	 * write the address of secondary startup into the clkc register
-	 * at offset 0x2bC, then write the magic number 0x3CAF5D62 to the
-	 * clkc register at offset 0x2b8, which is what boot rom code is
-	 * waiting for. This would wake up the secondary core from WFE
-	 */
-#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2bc
-	__raw_writel(__pa_symbol(sirfsoc_secondary_startup),
-		clk_base + SIRFSOC_CPU1_JUMPADDR_OFFSET);
-
-#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x2b8
-	__raw_writel(0x3CAF5D62,
-		clk_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET);
-
-	/* make sure write buffer is drained */
-	mb();
-
-	spin_lock(&boot_lock);
-
-	/*
-	 * The secondary processor is waiting to be released from
-	 * the holding pen - release it, then wait for it to flag
-	 * that it has been released by resetting prima2_pen_release.
-	 *
-	 * Note that "prima2_pen_release" is the hardware CPU ID, whereas
-	 * "cpu" is Linux's internal ID.
-	 */
-	prima2_pen_release = cpu_logical_map(cpu);
-	sync_cache_w(&prima2_pen_release);
-
-	/*
-	 * Send the secondary CPU SEV, thereby causing the boot monitor to read
-	 * the JUMPADDR and WAKEMAGIC, and branch to the address found there.
-	 */
-	dsb_sev();
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		smp_rmb();
-		if (prima2_pen_release == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return prima2_pen_release != -1 ? -ENOSYS : 0;
-}
-
-const struct smp_operations sirfsoc_smp_ops __initconst = {
-	.smp_secondary_init     = sirfsoc_secondary_init,
-	.smp_boot_secondary     = sirfsoc_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die                = sirfsoc_cpu_die,
-#endif
-};