Merge tag 'v3.11-rc7' into devicetree/next

Linux 3.11-rc7

6 files changed, 98 insertions, 14 deletions

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 6cacdc8dd654..cd2c88e7a8f7 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -421,24 +421,28 @@ config CPU_32v3
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select TLS_REG_EMUL if SMP || !MMU
+	select NEED_KUSER_HELPERS
 
 config CPU_32v4
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select TLS_REG_EMUL if SMP || !MMU
+	select NEED_KUSER_HELPERS
 
 config CPU_32v4T
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select TLS_REG_EMUL if SMP || !MMU
+	select NEED_KUSER_HELPERS
 
 config CPU_32v5
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select TLS_REG_EMUL if SMP || !MMU
+	select NEED_KUSER_HELPERS
 
 config CPU_32v6
 	bool
@@ -776,6 +780,7 @@ config CPU_BPREDICT_DISABLE
 
 config TLS_REG_EMUL
 	bool
+	select NEED_KUSER_HELPERS
 	help
 	  An SMP system using a pre-ARMv6 processor (there are apparently
 	  a few prototypes like that in existence) and therefore access to
@@ -783,11 +788,43 @@ config TLS_REG_EMUL
 
 config NEEDS_SYSCALL_FOR_CMPXCHG
 	bool
+	select NEED_KUSER_HELPERS
 	help
 	  SMP on a pre-ARMv6 processor?  Well OK then.
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config NEED_KUSER_HELPERS
+	bool
+
+config KUSER_HELPERS
+	bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS
+	default y
+	help
+	  Warning: disabling this option may break user programs.
+
+	  Provide kuser helpers in the vector page.  The kernel provides
+	  helper code to userspace in read only form at a fixed location
+	  in the high vector page to allow userspace to be independent of
+	  the CPU type fitted to the system.  This permits binaries to be
+	  run on ARMv4 through to ARMv7 without modification.
+
+	  See Documentation/arm/kernel_user_helpers.txt for details.
+
+	  However, the fixed address nature of these helpers can be used
+	  by ROP (return orientated programming) authors when creating
+	  exploits.
+
+	  If all of the binaries and libraries which run on your platform
+	  are built specifically for your platform, and make no use of
+	  these helpers, then you can turn this option off to hinder
+	  such exploits. However, in that case, if a binary or library
+	  relying on those helpers is run, it will receive a SIGILL signal,
+	  which will terminate the program.
+
+	  Say N here only if you are absolutely certain that you do not
+	  need these helpers; otherwise, the safe option is to say Y.
+
 config DMA_CACHE_RWFO
 	bool "Enable read/write for ownership DMA cache maintenance"
 	depends on CPU_V6K && SMP
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index b55b1015724b..4a0544492f10 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -245,7 +245,8 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
 		local_flush_bp_all();
 		local_flush_tlb_all();
-		dummy_flush_tlb_a15_erratum();
+		if (erratum_a15_798181())
+			dummy_flush_tlb_a15_erratum();
 	}
 
 	atomic64_set(&per_cpu(active_asids, cpu), asid);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4f56617a2392..53cdbd39ec8e 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -989,6 +989,7 @@ phys_addr_t arm_lowmem_limit __initdata = 0;
 
 void __init sanity_check_meminfo(void)
 {
+	phys_addr_t memblock_limit = 0;
 	int i, j, highmem = 0;
 	phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
 
@@ -1052,9 +1053,32 @@ void __init sanity_check_meminfo(void)
 			bank->size = size_limit;
 		}
 #endif
-		if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit)
-			arm_lowmem_limit = bank->start + bank->size;
+		if (!bank->highmem) {
+			phys_addr_t bank_end = bank->start + bank->size;
 
+			if (bank_end > arm_lowmem_limit)
+				arm_lowmem_limit = bank_end;
+
+			/*
+			 * Find the first non-section-aligned page, and point
+			 * memblock_limit at it. This relies on rounding the
+			 * limit down to be section-aligned, which happens at
+			 * the end of this function.
+			 *
+			 * With this algorithm, the start or end of almost any
+			 * bank can be non-section-aligned. The only exception
+			 * is that the start of the bank 0 must be section-
+			 * aligned, since otherwise memory would need to be
+			 * allocated when mapping the start of bank 0, which
+			 * occurs before any free memory is mapped.
+			 */
+			if (!memblock_limit) {
+				if (!IS_ALIGNED(bank->start, SECTION_SIZE))
+					memblock_limit = bank->start;
+				else if (!IS_ALIGNED(bank_end, SECTION_SIZE))
+					memblock_limit = bank_end;
+			}
+		}
 		j++;
 	}
 #ifdef CONFIG_HIGHMEM
@@ -1079,7 +1103,18 @@ void __init sanity_check_meminfo(void)
 #endif
 	meminfo.nr_banks = j;
 	high_memory = __va(arm_lowmem_limit - 1) + 1;
-	memblock_set_current_limit(arm_lowmem_limit);
+
+	/*
+	 * Round the memblock limit down to a section size.  This
+	 * helps to ensure that we will allocate memory from the
+	 * last full section, which should be mapped.
+	 */
+	if (memblock_limit)
+		memblock_limit = round_down(memblock_limit, SECTION_SIZE);
+	if (!memblock_limit)
+		memblock_limit = arm_lowmem_limit;
+
+	memblock_set_current_limit(memblock_limit);
 }
 
 static inline void prepare_page_table(void)
@@ -1160,7 +1195,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	/*
 	 * Allocate the vector page early.
 	 */
-	vectors = early_alloc(PAGE_SIZE);
+	vectors = early_alloc(PAGE_SIZE * 2);
 
 	early_trap_init(vectors);
 
@@ -1205,15 +1240,27 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
 	map.virtual = 0xffff0000;
 	map.length = PAGE_SIZE;
+#ifdef CONFIG_KUSER_HELPERS
 	map.type = MT_HIGH_VECTORS;
+#else
+	map.type = MT_LOW_VECTORS;
+#endif
 	create_mapping(&map);
 
 	if (!vectors_high()) {
 		map.virtual = 0;
+		map.length = PAGE_SIZE * 2;
 		map.type = MT_LOW_VECTORS;
 		create_mapping(&map);
 	}
 
+	/* Now create a kernel read-only mapping */
+	map.pfn += 1;
+	map.virtual = 0xffff0000 + PAGE_SIZE;
+	map.length = PAGE_SIZE;
+	map.type = MT_LOW_VECTORS;
+	create_mapping(&map);
+
 	/*
 	 * Ask the machine support to map in the statically mapped devices.
 	 */
@@ -1276,8 +1323,6 @@ void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
-	memblock_set_current_limit(arm_lowmem_limit);
-
 	build_mem_type_table();
 	prepare_page_table();
 	map_lowmem();
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index f64afb9f1bd5..bdd3be4be77a 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -110,7 +110,7 @@ ENTRY(cpu_v7_set_pte_ext)
  ARM(	str	r3, [r0, #2048]! )
  THUMB(	add	r0, r0, #2048 )
  THUMB(	str	r3, [r0] )
-	ALT_SMP(mov	pc,lr)
+	ALT_SMP(W(nop))
 	ALT_UP (mcr	p15, 0, r0, c7, c10, 1)		@ flush_pte
 #endif
 	mov	pc, lr
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index c36ac69488c8..01a719e18bb0 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -81,7 +81,7 @@ ENTRY(cpu_v7_set_pte_ext)
 	tst	r3, #1 << (55 - 32)		@ L_PTE_DIRTY
 	orreq	r2, #L_PTE_RDONLY
 1:	strd	r2, r3, [r0]
-	ALT_SMP(mov	pc, lr)
+	ALT_SMP(W(nop))
 	ALT_UP (mcr	p15, 0, r0, c7, c10, 1)		@ flush_pte
 #endif
 	mov	pc, lr
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 5c6d5a3050ea..73398bcf9bd8 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -75,13 +75,14 @@ ENTRY(cpu_v7_do_idle)
 ENDPROC(cpu_v7_do_idle)
 
 ENTRY(cpu_v7_dcache_clean_area)
-	ALT_SMP(mov	pc, lr)			@ MP extensions imply L1 PTW
-	ALT_UP(W(nop))
-	dcache_line_size r2, r3
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	ALT_SMP(W(nop))			@ MP extensions imply L1 PTW
+	ALT_UP_B(1f)
+	mov	pc, lr
+1:	dcache_line_size r2, r3
+2:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, r2
 	subs	r1, r1, r2
-	bhi	1b
+	bhi	2b
 	dsb
 	mov	pc, lr
 ENDPROC(cpu_v7_dcache_clean_area)