Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...

1 files changed, 11 insertions, 19 deletions

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index d65ebe303b9f..70b23893f094 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -140,16 +140,13 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 	val = __raw_readl(reg);
 	edge = (val >> (bit << 1)) & 3;
 	val &= ~(0x3 << (bit << 1));
-	switch (edge) {
-	case GPIO_INT_HIGH_LEV:
+	if (edge == GPIO_INT_HIGH_LEV) {
 		edge = GPIO_INT_LOW_LEV;
 		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
-		break;
-	case GPIO_INT_LOW_LEV:
+	} else if (edge == GPIO_INT_LOW_LEV) {
 		edge = GPIO_INT_HIGH_LEV;
 		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
-		break;
-	default:
+	} else {
 		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
 		       gpio, edge);
 		return;
@@ -157,25 +154,20 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 	__raw_writel(val | (edge << (bit << 1)), reg);
 }
 
-/* handle n interrupts in one status register */
+/* handle 32 interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
-	u32 gpio_irq_no;
+	u32 gpio_irq_no_base = port->virtual_irq_start;
 
-	gpio_irq_no = port->virtual_irq_start;
-	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
-		u32 gpio = irq_to_gpio(gpio_irq_no);
-
-		if ((irq_stat & 1) == 0)
-			continue;
+	while (irq_stat != 0) {
+		int irqoffset = fls(irq_stat) - 1;
 
-		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+		if (port->both_edges & (1 << irqoffset))
+			mxc_flip_edge(port, irqoffset);
 
-		if (port->both_edges & (1 << (gpio & 31)))
-			mxc_flip_edge(port, gpio);
+		generic_handle_irq(gpio_irq_no_base + irqoffset);
 
-		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
-				&irq_desc[gpio_irq_no]);
+		irq_stat &= ~(1 << irqoffset);
 	}
 }