ARM: rockchip: fix the CPU soft reset

We need different orderings when turning a core on and turning a core
off.  In one case we need to assert reset before turning power off.
In ther other case we need to turn power on and the deassert reset.

In general, the correct flow is:

CPU off:
    reset_control_assert
    regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), BIT(pd))
    wait_for_power_domain_to_turn_off
CPU on:
    regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), 0)
    wait_for_power_domain_to_turn_on
    reset_control_deassert

This is needed for stressing CPU up/down, as per:
    cd /sys/devices/system/cpu/
    for i in $(seq 10000); do
        echo "================= $i ============"
        for j in $(seq 100); do
            while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat cpu3/online)" != "000"" ]]
                echo 0 > cpu1/online
                echo 0 > cpu2/online
                echo 0 > cpu3/online
            done
            while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat cpu3/online)" != "111" ]]; do
                echo 1 > cpu1/online
                echo 1 > cpu2/online
                echo 1 > cpu3/online
            done
        done
    done

The following is reproducable log:
    [34466.186812] PM: noirq suspend of devices complete after 0.669 msecs
    [34466.186824] Disabling non-boot CPUs ...
    [34466.187509] CPU1: shutdown
    [34466.188672] CPU2: shutdown
    [34473.736627] Kernel panic - not syncing:Watchdog detected hard LOCKUP on cpu 0
    .......
or others similar log:
    .......
    [ 4072.454453] CPU1: shutdown
    [ 4072.504436] CPU2: shutdown
    [ 4072.554426] CPU3: shutdown
    [ 4072.577827] CPU1: Booted secondary processor
    [ 4072.582611] CPU2: Booted secondary processor
    <hang>

    Tested by cpu up/down scripts, the results told us need delay more time
before write the sram. The wait time is affected by many aspects
(e.g: cpu frequency, bootrom frequency, sram frequency, bus speed, ...).

    Although the cpus other than cpu0 will write the sram, the speedy is
no the same as cpu0, if the cpu0 early wake up, perhaps the other cpus
can't startup. As we know, the cpu0 can wake up when the cpu1/2/3 write
the 'sram+4/8' and send the sev.
    Anyway.....
    At the moment, 1ms delay will be happy work for cpu up/down scripts test.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Fixes: 3ee851e212d0 ("ARM: rockchip: add basic smp support for rk3288")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

0 files changed, 0 insertions, 0 deletions