Merge tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver pull request for 4.2-rc1.

  Lots of mei, extcon, coresight, uio, mic, and other driver updates in
  here.  Full details in the shortlog.  All of these have been in
  linux-next for some time with no reported problems"

* tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits)
  mei: me: wait for power gating exit confirmation
  mei: reset flow control on the last client disconnection
  MAINTAINERS: mei: add mei_cl_bus.h to maintained file list
  misc: sram: sort and clean up included headers
  misc: sram: move reserved block logic out of probe function
  misc: sram: add private struct device and virt_base members
  misc: sram: report correct SRAM pool size
  misc: sram: bump error message level on unclean driver unbinding
  misc: sram: fix device node reference leak on error
  misc: sram: fix enabled clock leak on error path
  misc: mic: Fix reported static checker warning
  misc: mic: Fix randconfig build error by including errno.h
  uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config
  uio: pruss: Add CONFIG_HAS_IOMEM dependence
  uio: pruss: Include <linux/sizes.h>
  extcon: Redefine the unique id of supported external connectors without 'enum extcon' type
  char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration().
  Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion
  parport: check exclusive access before register
  w1: use correct lock on error in w1_seq_show()
  ...

15 files changed, 797 insertions, 529 deletions

diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index fdc0bf0543ce..0cebbf668886 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -28,15 +28,22 @@ config EXTCON_ARIZONA
 	  with Wolfson Arizona devices. These are audio CODECs with
 	  advanced audio accessory detection support.
 
+config EXTCON_AXP288
+	tristate "X-Power AXP288 EXTCON support"
+	depends on MFD_AXP20X && USB_PHY
+	help
+	  Say Y here to enable support for USB peripheral detection
+	  and USB MUX switching by X-Power AXP288 PMIC.
+
 config EXTCON_GPIO
 	tristate "GPIO extcon support"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here to enable GPIO based extcon support. Note that GPIO
 	  extcon supports single state per extcon instance.
 
 config EXTCON_MAX14577
-	tristate "MAX14577/77836 EXTCON Support"
+	tristate "Maxim MAX14577/77836 EXTCON Support"
 	depends on MFD_MAX14577
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -46,7 +53,7 @@ config EXTCON_MAX14577
 	  detector and switch.
 
 config EXTCON_MAX77693
-	tristate "MAX77693 EXTCON Support"
+	tristate "Maxim MAX77693 EXTCON Support"
 	depends on MFD_MAX77693 && INPUT
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -56,7 +63,7 @@ config EXTCON_MAX77693
 	  detector and switch.
 
 config EXTCON_MAX77843
-	tristate "MAX77843 EXTCON Support"
+	tristate "Maxim MAX77843 EXTCON Support"
 	depends on MFD_MAX77843
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -66,7 +73,7 @@ config EXTCON_MAX77843
 	  detector add switch.
 
 config EXTCON_MAX8997
-	tristate "MAX8997 EXTCON Support"
+	tristate "Maxim MAX8997 EXTCON Support"
 	depends on MFD_MAX8997 && IRQ_DOMAIN
 	help
 	  If you say yes here you get support for the MUIC device of
@@ -81,7 +88,7 @@ config EXTCON_PALMAS
 	  detection by palmas usb.
 
 config EXTCON_RT8973A
-	tristate "RT8973A EXTCON support"
+	tristate "Richtek RT8973A EXTCON support"
 	depends on I2C
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -93,7 +100,7 @@ config EXTCON_RT8973A
 	  from abnormal high input voltage (up to 28V).
 
 config EXTCON_SM5502
-	tristate "SM5502 EXTCON support"
+	tristate "Silicon Mitus SM5502 EXTCON support"
 	depends on I2C
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -105,9 +112,9 @@ config EXTCON_SM5502
 
 config EXTCON_USB_GPIO
 	tristate "USB GPIO extcon support"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here to enable GPIO based USB cable detection extcon support.
 	  Used typically if GPIO is used for USB ID pin detection.
 
-endif # MULTISTATE_SWITCH
+endif
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 9204114791a3..ba787d04295b 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_EXTCON)		+= extcon.o
 obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o
 obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
+obj-$(CONFIG_EXTCON_AXP288)	+= extcon-axp288.o
 obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
 obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o
 obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 2bb82e55065a..7fc0ae1912f8 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -29,7 +29,6 @@
  * struct adc_jack_data - internal data for adc_jack device driver
  * @edev:		extcon device.
  * @cable_names:	list of supported cables.
- * @num_cables:		size of cable_names.
  * @adc_conditions:	list of adc value conditions.
  * @num_conditions:	size of adc_conditions.
  * @irq:		irq number of attach/detach event (0 if not exist).
@@ -41,8 +40,7 @@
 struct adc_jack_data {
 	struct extcon_dev *edev;
 
-	const char **cable_names;
-	int num_cables;
+	const unsigned int **cable_names;
 	struct adc_jack_cond *adc_conditions;
 	int num_conditions;
 
@@ -112,17 +110,6 @@ static int adc_jack_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
-	data->edev->name = pdata->name;
-
-	/* Check the length of array and set num_cables */
-	for (i = 0; data->edev->supported_cable[i]; i++)
-		;
-	if (i == 0 || i > SUPPORTED_CABLE_MAX) {
-		dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n",
-				i - 1);
-		return -EINVAL;
-	}
-	data->num_cables = i;
 
 	if (!pdata->adc_conditions ||
 			!pdata->adc_conditions[0].state) {
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index a0ed35b336e4..ad87f263056f 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -32,13 +32,10 @@
 #include <linux/mfd/arizona/core.h>
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
+#include <dt-bindings/mfd/arizona.h>
 
 #define ARIZONA_MAX_MICD_RANGE 8
 
-#define ARIZONA_ACCDET_MODE_MIC 0
-#define ARIZONA_ACCDET_MODE_HPL 1
-#define ARIZONA_ACCDET_MODE_HPR 2
-
 #define ARIZONA_MICD_CLAMP_MODE_JDL      0x4
 #define ARIZONA_MICD_CLAMP_MODE_JDH      0x5
 #define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
@@ -94,7 +91,7 @@ struct arizona_extcon_info {
 	bool detecting;
 	int jack_flips;
 
-	int hpdet_ip;
+	int hpdet_ip_version;
 
 	struct extcon_dev *edev;
 };
@@ -121,17 +118,12 @@ static const int arizona_micd_levels[] = {
 	1257,
 };
 
-#define ARIZONA_CABLE_MECHANICAL 0
-#define ARIZONA_CABLE_MICROPHONE 1
-#define ARIZONA_CABLE_HEADPHONE  2
-#define ARIZONA_CABLE_LINEOUT    3
-
-static const char *arizona_cable[] = {
-	"Mechanical",
-	"Microphone",
-	"Headphone",
-	"Line-out",
-	NULL,
+static const unsigned int arizona_cable[] = {
+	EXTCON_MECHANICAL,
+	EXTCON_MICROPHONE,
+	EXTCON_HEADPHONE,
+	EXTCON_LINE_OUT,
+	EXTCON_NONE,
 };
 
 static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
@@ -145,6 +137,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
 
 	switch (arizona->type) {
 	case WM5110:
+	case WM8280:
 		mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR |
 		       ARIZONA_HP1L_SHRTI;
 		if (clamp)
@@ -380,7 +373,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
 		return ret;
 	}
 
-	switch (info->hpdet_ip) {
+	switch (info->hpdet_ip_version) {
 	case 0:
 		if (!(val & ARIZONA_HP_DONE)) {
 			dev_err(arizona->dev, "HPDET did not complete: %x\n",
@@ -441,7 +434,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
 
 	default:
 		dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
-			 info->hpdet_ip);
+			 info->hpdet_ip_version);
 	case 2:
 		if (!(val & ARIZONA_HP_DONE_B)) {
 			dev_err(arizona->dev, "HPDET did not complete: %x\n",
@@ -559,7 +552,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	struct arizona_extcon_info *info = data;
 	struct arizona *arizona = info->arizona;
 	int id_gpio = arizona->pdata.hpdet_id_gpio;
-	int report = ARIZONA_CABLE_HEADPHONE;
+	unsigned int report = EXTCON_HEADPHONE;
 	int ret, reading;
 	bool mic = false;
 
@@ -573,7 +566,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	}
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
+	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 			ret);
@@ -604,9 +597,9 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 
 	/* Report high impedence cables as line outputs */
 	if (reading >= 5000)
-		report = ARIZONA_CABLE_LINEOUT;
+		report = EXTCON_LINE_OUT;
 	else
-		report = ARIZONA_CABLE_HEADPHONE;
+		report = EXTCON_HEADPHONE;
 
 	ret = extcon_set_cable_state_(info->edev, report, true);
 	if (ret != 0)
@@ -670,9 +663,9 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
 	ret = regmap_update_bits(arizona->regmap,
 				 ARIZONA_ACCESSORY_DETECT_MODE_1,
 				 ARIZONA_ACCDET_MODE_MASK,
-				 ARIZONA_ACCDET_MODE_HPL);
+				 arizona->pdata.hpdet_channel);
 	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
+		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
 		goto err;
 	}
 
@@ -691,8 +684,7 @@ err:
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev,
-				      ARIZONA_CABLE_HEADPHONE, true);
+	ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -722,9 +714,9 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
 				 ARIZONA_ACCESSORY_DETECT_MODE_1,
 				 ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
 				 info->micd_modes[0].src |
-				 ARIZONA_ACCDET_MODE_HPL);
+				 arizona->pdata.hpdet_channel);
 	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
+		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
 		goto err;
 	}
 
@@ -749,8 +741,7 @@ err:
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev,
-				      ARIZONA_CABLE_HEADPHONE, true);
+	ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -789,7 +780,7 @@ static void arizona_micd_detect(struct work_struct *work)
 	mutex_lock(&info->lock);
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
+	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 				ret);
@@ -838,8 +829,7 @@ static void arizona_micd_detect(struct work_struct *work)
 		arizona_identify_headphone(info);
 
 		ret = extcon_set_cable_state_(info->edev,
-					      ARIZONA_CABLE_MICROPHONE, true);
-
+					      EXTCON_MICROPHONE, true);
 		if (ret != 0)
 			dev_err(arizona->dev, "Headset report failed: %d\n",
 				ret);
@@ -1030,7 +1020,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 	if (info->last_jackdet == present) {
 		dev_dbg(arizona->dev, "Detected jack\n");
 		ret = extcon_set_cable_state_(info->edev,
-					      ARIZONA_CABLE_MECHANICAL, true);
+					      EXTCON_MECHANICAL, true);
 
 		if (ret != 0)
 			dev_err(arizona->dev, "Mechanical report failed: %d\n",
@@ -1120,6 +1110,26 @@ static void arizona_micd_set_level(struct arizona *arizona, int index,
 	regmap_update_bits(arizona->regmap, reg, mask, level);
 }
 
+static int arizona_extcon_of_get_pdata(struct arizona *arizona)
+{
+	struct arizona_pdata *pdata = &arizona->pdata;
+	unsigned int val = ARIZONA_ACCDET_MODE_HPL;
+
+	of_property_read_u32(arizona->dev->of_node, "wlf,hpdet-channel", &val);
+	switch (val) {
+	case ARIZONA_ACCDET_MODE_HPL:
+	case ARIZONA_ACCDET_MODE_HPR:
+		pdata->hpdet_channel = val;
+		break;
+	default:
+		dev_err(arizona->dev,
+			"Wrong wlf,hpdet-channel DT value %d\n", val);
+		pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL;
+	}
+
+	return 0;
+}
+
 static int arizona_extcon_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
@@ -1137,6 +1147,11 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	if (IS_ENABLED(CONFIG_OF)) {
+		if (!dev_get_platdata(arizona->dev))
+			arizona_extcon_of_get_pdata(arizona);
+	}
+
 	info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");
 	if (IS_ERR(info->micvdd)) {
 		ret = PTR_ERR(info->micvdd);
@@ -1161,7 +1176,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 			break;
 		default:
 			info->micd_clamp = true;
-			info->hpdet_ip = 1;
+			info->hpdet_ip_version = 1;
 			break;
 		}
 		break;
@@ -1172,7 +1187,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 			break;
 		default:
 			info->micd_clamp = true;
-			info->hpdet_ip = 2;
+			info->hpdet_ip_version = 2;
 			break;
 		}
 		break;
@@ -1185,7 +1200,6 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
-	info->edev->name = "Headset Jack";
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret < 0) {
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
new file mode 100644
index 000000000000..ea962bc547b8
--- /dev/null
+++ b/drivers/extcon/extcon-axp288.c
@@ -0,0 +1,381 @@
+/*
+ * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/usb/phy.h>
+#include <linux/notifier.h>
+#include <linux/extcon.h>
+#include <linux/regmap.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/axp20x.h>
+
+/* Power source status register */
+#define PS_STAT_VBUS_TRIGGER		BIT(0)
+#define PS_STAT_BAT_CHRG_DIR		BIT(2)
+#define PS_STAT_VBUS_ABOVE_VHOLD	BIT(3)
+#define PS_STAT_VBUS_VALID		BIT(4)
+#define PS_STAT_VBUS_PRESENT		BIT(5)
+
+/* BC module global register */
+#define BC_GLOBAL_RUN			BIT(0)
+#define BC_GLOBAL_DET_STAT		BIT(2)
+#define BC_GLOBAL_DBP_TOUT		BIT(3)
+#define BC_GLOBAL_VLGC_COM_SEL		BIT(4)
+#define BC_GLOBAL_DCD_TOUT_MASK		(BIT(6)|BIT(5))
+#define BC_GLOBAL_DCD_TOUT_300MS	0
+#define BC_GLOBAL_DCD_TOUT_100MS	1
+#define BC_GLOBAL_DCD_TOUT_500MS	2
+#define BC_GLOBAL_DCD_TOUT_900MS	3
+#define BC_GLOBAL_DCD_DET_SEL		BIT(7)
+
+/* BC module vbus control and status register */
+#define VBUS_CNTL_DPDM_PD_EN		BIT(4)
+#define VBUS_CNTL_DPDM_FD_EN		BIT(5)
+#define VBUS_CNTL_FIRST_PO_STAT		BIT(6)
+
+/* BC USB status register */
+#define USB_STAT_BUS_STAT_MASK		(BIT(3)|BIT(2)|BIT(1)|BIT(0))
+#define USB_STAT_BUS_STAT_SHIFT		0
+#define USB_STAT_BUS_STAT_ATHD		0
+#define USB_STAT_BUS_STAT_CONN		1
+#define USB_STAT_BUS_STAT_SUSP		2
+#define USB_STAT_BUS_STAT_CONF		3
+#define USB_STAT_USB_SS_MODE		BIT(4)
+#define USB_STAT_DEAD_BAT_DET		BIT(6)
+#define USB_STAT_DBP_UNCFG		BIT(7)
+
+/* BC detect status register */
+#define DET_STAT_MASK			(BIT(7)|BIT(6)|BIT(5))
+#define DET_STAT_SHIFT			5
+#define DET_STAT_SDP			1
+#define DET_STAT_CDP			2
+#define DET_STAT_DCP			3
+
+/* IRQ enable-1 register */
+#define PWRSRC_IRQ_CFG_MASK		(BIT(4)|BIT(3)|BIT(2))
+
+/* IRQ enable-6 register */
+#define BC12_IRQ_CFG_MASK		BIT(1)
+
+enum axp288_extcon_reg {
+	AXP288_PS_STAT_REG		= 0x00,
+	AXP288_PS_BOOT_REASON_REG	= 0x02,
+	AXP288_BC_GLOBAL_REG		= 0x2c,
+	AXP288_BC_VBUS_CNTL_REG		= 0x2d,
+	AXP288_BC_USB_STAT_REG		= 0x2e,
+	AXP288_BC_DET_STAT_REG		= 0x2f,
+	AXP288_PWRSRC_IRQ_CFG_REG	= 0x40,
+	AXP288_BC12_IRQ_CFG_REG		= 0x45,
+};
+
+enum axp288_mux_select {
+	EXTCON_GPIO_MUX_SEL_PMIC = 0,
+	EXTCON_GPIO_MUX_SEL_SOC,
+};
+
+enum axp288_extcon_irq {
+	VBUS_FALLING_IRQ = 0,
+	VBUS_RISING_IRQ,
+	MV_CHNG_IRQ,
+	BC_USB_CHNG_IRQ,
+	EXTCON_IRQ_END,
+};
+
+static const unsigned int axp288_extcon_cables[] = {
+	EXTCON_SLOW_CHARGER,
+	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_FAST_CHARGER,
+	EXTCON_NONE,
+};
+
+struct axp288_extcon_info {
+	struct device *dev;
+	struct regmap *regmap;
+	struct regmap_irq_chip_data *regmap_irqc;
+	struct axp288_extcon_pdata *pdata;
+	int irq[EXTCON_IRQ_END];
+	struct extcon_dev *edev;
+	struct notifier_block extcon_nb;
+	struct usb_phy *otg;
+};
+
+/* Power up/down reason string array */
+static char *axp288_pwr_up_down_info[] = {
+	"Last wake caused by user pressing the power button",
+	"Last wake caused by a charger insertion",
+	"Last wake caused by a battery insertion",
+	"Last wake caused by SOC initiated global reset",
+	"Last wake caused by cold reset",
+	"Last shutdown caused by PMIC UVLO threshold",
+	"Last shutdown caused by SOC initiated cold off",
+	"Last shutdown caused by user pressing the power button",
+	NULL,
+};
+
+/*
+ * Decode and log the given "reset source indicator" (rsi)
+ * register and then clear it.
+ */
+static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
+{
+	char **rsi;
+	unsigned int val, i, clear_mask = 0;
+	int ret;
+
+	ret = regmap_read(info->regmap, AXP288_PS_BOOT_REASON_REG, &val);
+	for (i = 0, rsi = axp288_pwr_up_down_info; *rsi; rsi++, i++) {
+		if (val & BIT(i)) {
+			dev_dbg(info->dev, "%s\n", *rsi);
+			clear_mask |= BIT(i);
+		}
+	}
+
+	/* Clear the register value for next reboot (write 1 to clear bit) */
+	regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
+}
+
+static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
+{
+	static bool notify_otg, notify_charger;
+	static unsigned int cable;
+	int ret, stat, cfg, pwr_stat;
+	u8 chrg_type;
+	bool vbus_attach = false;
+
+	ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat);
+	if (ret < 0) {
+		dev_err(info->dev, "failed to read vbus status\n");
+		return ret;
+	}
+
+	vbus_attach = (pwr_stat & PS_STAT_VBUS_PRESENT);
+	if (!vbus_attach)
+		goto notify_otg;
+
+	/* Check charger detection completion status */
+	ret = regmap_read(info->regmap, AXP288_BC_GLOBAL_REG, &cfg);
+	if (ret < 0)
+		goto dev_det_ret;
+	if (cfg & BC_GLOBAL_DET_STAT) {
+		dev_dbg(info->dev, "can't complete the charger detection\n");
+		goto dev_det_ret;
+	}
+
+	ret = regmap_read(info->regmap, AXP288_BC_DET_STAT_REG, &stat);
+	if (ret < 0)
+		goto dev_det_ret;
+
+	chrg_type = (stat & DET_STAT_MASK) >> DET_STAT_SHIFT;
+
+	switch (chrg_type) {
+	case DET_STAT_SDP:
+		dev_dbg(info->dev, "sdp cable is connecetd\n");
+		notify_otg = true;
+		notify_charger = true;
+		cable = EXTCON_SLOW_CHARGER;
+		break;
+	case DET_STAT_CDP:
+		dev_dbg(info->dev, "cdp cable is connecetd\n");
+		notify_otg = true;
+		notify_charger = true;
+		cable = EXTCON_CHARGE_DOWNSTREAM;
+		break;
+	case DET_STAT_DCP:
+		dev_dbg(info->dev, "dcp cable is connecetd\n");
+		notify_charger = true;
+		cable = EXTCON_FAST_CHARGER;
+		break;
+	default:
+		dev_warn(info->dev,
+			"disconnect or unknown or ID event\n");
+	}
+
+notify_otg:
+	if (notify_otg) {
+		/*
+		 * If VBUS is absent Connect D+/D- lines to PMIC for BC
+		 * detection. Else connect them to SOC for USB communication.
+		 */
+		if (info->pdata->gpio_mux_cntl)
+			gpiod_set_value(info->pdata->gpio_mux_cntl,
+				vbus_attach ? EXTCON_GPIO_MUX_SEL_SOC
+						: EXTCON_GPIO_MUX_SEL_PMIC);
+
+		atomic_notifier_call_chain(&info->otg->notifier,
+			vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL);
+	}
+
+	if (notify_charger)
+		extcon_set_cable_state_(info->edev, cable, vbus_attach);
+
+	/* Clear the flags on disconnect event */
+	if (!vbus_attach)
+		notify_otg = notify_charger = false;
+
+	return 0;
+
+dev_det_ret:
+	if (ret < 0)
+		dev_err(info->dev, "failed to detect BC Mod\n");
+
+	return ret;
+}
+
+static irqreturn_t axp288_extcon_isr(int irq, void *data)
+{
+	struct axp288_extcon_info *info = data;
+	int ret;
+
+	ret = axp288_handle_chrg_det_event(info);
+	if (ret < 0)
+		dev_err(info->dev, "failed to handle the interrupt\n");
+
+	return IRQ_HANDLED;
+}
+
+static void axp288_extcon_enable_irq(struct axp288_extcon_info *info)
+{
+	/* Unmask VBUS interrupt */
+	regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG,
+						PWRSRC_IRQ_CFG_MASK);
+	regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
+						BC_GLOBAL_RUN, 0);
+	/* Unmask the BC1.2 complete interrupts */
+	regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK);
+	/* Enable the charger detection logic */
+	regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
+					BC_GLOBAL_RUN, BC_GLOBAL_RUN);
+}
+
+static int axp288_extcon_probe(struct platform_device *pdev)
+{
+	struct axp288_extcon_info *info;
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	int ret, i, pirq, gpio;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = &pdev->dev;
+	info->regmap = axp20x->regmap;
+	info->regmap_irqc = axp20x->regmap_irqc;
+	info->pdata = pdev->dev.platform_data;
+
+	if (!info->pdata) {
+		/* Try ACPI provided pdata via device properties */
+		if (!device_property_present(&pdev->dev,
+					"axp288_extcon_data\n"))
+			dev_err(&pdev->dev, "failed to get platform data\n");
+		return -ENODEV;
+	}
+	platform_set_drvdata(pdev, info);
+
+	axp288_extcon_log_rsi(info);
+
+	/* Initialize extcon device */
+	info->edev = devm_extcon_dev_allocate(&pdev->dev,
+					      axp288_extcon_cables);
+	if (IS_ERR(info->edev)) {
+		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
+		return PTR_ERR(info->edev);
+	}
+
+	/* Register extcon device */
+	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	/* Get otg transceiver phy */
+	info->otg = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR(info->otg)) {
+		dev_err(&pdev->dev, "failed to get otg transceiver\n");
+		return PTR_ERR(info->otg);
+	}
+
+	/* Set up gpio control for USB Mux */
+	if (info->pdata->gpio_mux_cntl) {
+		gpio = desc_to_gpio(info->pdata->gpio_mux_cntl);
+		ret = gpio_request(gpio, "USB_MUX");
+		if (ret < 0) {
+			dev_err(&pdev->dev,
+				"failed to request the gpio=%d\n", gpio);
+			goto gpio_req_failed;
+		}
+		gpiod_direction_output(info->pdata->gpio_mux_cntl,
+						EXTCON_GPIO_MUX_SEL_PMIC);
+	}
+
+	for (i = 0; i < EXTCON_IRQ_END; i++) {
+		pirq = platform_get_irq(pdev, i);
+		info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
+		if (info->irq[i] < 0) {
+			dev_err(&pdev->dev,
+				"failed to get virtual interrupt=%d\n", pirq);
+			ret = info->irq[i];
+			goto gpio_req_failed;
+		}
+
+		ret = devm_request_threaded_irq(&pdev->dev, info->irq[i],
+				NULL, axp288_extcon_isr,
+				IRQF_ONESHOT | IRQF_NO_SUSPEND,
+				pdev->name, info);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to request interrupt=%d\n",
+							info->irq[i]);
+			goto gpio_req_failed;
+		}
+	}
+
+	/* Enable interrupts */
+	axp288_extcon_enable_irq(info);
+
+	return 0;
+
+gpio_req_failed:
+	usb_put_phy(info->otg);
+	return ret;
+}
+
+static int axp288_extcon_remove(struct platform_device *pdev)
+{
+	struct axp288_extcon_info *info = platform_get_drvdata(pdev);
+
+	usb_put_phy(info->otg);
+	return 0;
+}
+
+static struct platform_driver axp288_extcon_driver = {
+	.probe = axp288_extcon_probe,
+	.remove = axp288_extcon_remove,
+	.driver = {
+		.name = "axp288_extcon",
+	},
+};
+module_platform_driver(axp288_extcon_driver);
+
+MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
+MODULE_DESCRIPTION("X-Powers AXP288 extcon driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 7af33fc433cd..355459a54e8b 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -104,7 +104,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
-	extcon_data->edev->name = pdata->name;
 
 	extcon_data->gpio = pdata->gpio;
 	extcon_data->gpio_active_low = pdata->gpio_active_low;
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
index 3823aa4a3a80..df0659d98e5a 100644
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@@ -148,33 +148,14 @@ enum max14577_muic_acc_type {
 	MAX14577_MUIC_ADC_OPEN,
 };
 
-/* max14577 MUIC device support below list of accessories(external connector) */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_TA,
-	EXTCON_CABLE_FAST_CHARGER,
-	EXTCON_CABLE_SLOW_CHARGER,
-	EXTCON_CABLE_CHARGE_DOWNSTREAM,
-	EXTCON_CABLE_JIG_USB_ON,
-	EXTCON_CABLE_JIG_USB_OFF,
-	EXTCON_CABLE_JIG_UART_OFF,
-	EXTCON_CABLE_JIG_UART_ON,
-
-	_EXTCON_CABLE_NUM,
-};
-
-static const char *max14577_extcon_cable[] = {
-	[EXTCON_CABLE_USB]			= "USB",
-	[EXTCON_CABLE_TA]			= "TA",
-	[EXTCON_CABLE_FAST_CHARGER]		= "Fast-charger",
-	[EXTCON_CABLE_SLOW_CHARGER]		= "Slow-charger",
-	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
-	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
-
-	NULL,
+static const unsigned int max14577_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_TA,
+	EXTCON_FAST_CHARGER,
+	EXTCON_SLOW_CHARGER,
+	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_JIG,
+	EXTCON_NONE,
 };
 
 /*
@@ -348,7 +329,6 @@ static int max14577_muic_get_cable_type(struct max14577_muic_info *info,
 static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 		int cable_type, bool attached)
 {
-	char cable_name[32];
 	int ret = 0;
 	u8 path = CTRL1_SW_OPEN;
 
@@ -358,18 +338,12 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 
 	switch (cable_type) {
 	case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
-		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-OFF");
-		path = CTRL1_SW_USB;
-		break;
 	case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
 		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-ON");
 		path = CTRL1_SW_USB;
 		break;
 	case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
 		/* PATH:AP_UART */
-		strcpy(cable_name, "JIG-UART-OFF");
 		path = CTRL1_SW_UART;
 		break;
 	default:
@@ -382,7 +356,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state(info->edev, cable_name, attached);
+	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -479,20 +453,22 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "USB", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state(info->edev, "TA", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state(info->edev,
-				"Charge-downstream", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
-		extcon_set_cable_state(info->edev, "Slow-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
-		extcon_set_cable_state(info->edev, "Fast-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_NONE:
 	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
@@ -742,8 +718,6 @@ static int max14577_muic_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	info->edev->name = dev_name(&pdev->dev);
-
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register extcon device\n");
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index a66bec8f6252..f4f3b3d53928 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -200,44 +200,17 @@ enum max77693_muic_acc_type {
 /*
  * MAX77693 MUIC device support below list of accessories(external connector)
  */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-	EXTCON_CABLE_TA,
-	EXTCON_CABLE_FAST_CHARGER,
-	EXTCON_CABLE_SLOW_CHARGER,
-	EXTCON_CABLE_CHARGE_DOWNSTREAM,
-	EXTCON_CABLE_MHL,
-	EXTCON_CABLE_MHL_TA,
-	EXTCON_CABLE_JIG_USB_ON,
-	EXTCON_CABLE_JIG_USB_OFF,
-	EXTCON_CABLE_JIG_UART_OFF,
-	EXTCON_CABLE_JIG_UART_ON,
-	EXTCON_CABLE_DOCK_SMART,
-	EXTCON_CABLE_DOCK_DESK,
-	EXTCON_CABLE_DOCK_AUDIO,
-
-	_EXTCON_CABLE_NUM,
-};
-
-static const char *max77693_extcon_cable[] = {
-	[EXTCON_CABLE_USB]			= "USB",
-	[EXTCON_CABLE_USB_HOST]			= "USB-Host",
-	[EXTCON_CABLE_TA]			= "TA",
-	[EXTCON_CABLE_FAST_CHARGER]		= "Fast-charger",
-	[EXTCON_CABLE_SLOW_CHARGER]		= "Slow-charger",
-	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
-	[EXTCON_CABLE_MHL]			= "MHL",
-	[EXTCON_CABLE_MHL_TA]			= "MHL-TA",
-	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
-	[EXTCON_CABLE_DOCK_SMART]		= "Dock-Smart",
-	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
-	[EXTCON_CABLE_DOCK_AUDIO]		= "Dock-Audio",
-
-	NULL,
+static const unsigned int max77693_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_FAST_CHARGER,
+	EXTCON_SLOW_CHARGER,
+	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_MHL,
+	EXTCON_JIG,
+	EXTCON_DOCK,
+	EXTCON_NONE,
 };
 
 /*
@@ -484,7 +457,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 	int ret = 0;
 	int vbvolt;
 	bool cable_attached;
-	char dock_name[CABLE_NAME_MAX];
+	unsigned int dock_id;
 
 	dev_info(info->dev,
 		"external connector is %s (adc:0x%02x)\n",
@@ -507,15 +480,15 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 		}
 
 		/*
-		 * Notify Dock-Smart/MHL state.
-		 * - Dock-Smart device include three type of cable which
+		 * Notify Dock/MHL state.
+		 * - Dock device include three type of cable which
 		 * are HDMI, USB for mouse/keyboard and micro-usb port
-		 * for USB/TA cable. Dock-Smart device need always exteranl
-		 * power supply(USB/TA cable through micro-usb cable). Dock-
-		 * Smart device support screen output of target to separate
+		 * for USB/TA cable. Dock device need always exteranl
+		 * power supply(USB/TA cable through micro-usb cable). Dock
+		 * device support screen output of target to separate
 		 * monitor and mouse/keyboard for desktop mode.
 		 *
-		 * Features of 'USB/TA cable with Dock-Smart device'
+		 * Features of 'USB/TA cable with Dock device'
 		 * - Support MHL
 		 * - Support external output feature of audio
 		 * - Support charging through micro-usb port without data
@@ -529,16 +502,16 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "Dock-Smart", attached);
-		extcon_set_cable_state(info->edev, "MHL", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
+		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
 		goto out;
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
-		strcpy(dock_name, "Dock-Desk");
+		dock_id = EXTCON_DOCK;
 		break;
 	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
-		strcpy(dock_name, "Dock-Audio");
+		dock_id = EXTCON_DOCK;
 		if (!attached)
-			extcon_set_cable_state(info->edev, "USB", false);
+			extcon_set_cable_state_(info->edev, EXTCON_USB, false);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s dock device\n",
@@ -550,7 +523,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 	ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
 	if (ret < 0)
 		return ret;
-	extcon_set_cable_state(info->edev, dock_name, attached);
+	extcon_set_cable_state_(info->edev, dock_id, attached);
 
 out:
 	return 0;
@@ -615,20 +588,19 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 		ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state(info->edev, "USB-Host", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77693_MUIC_GND_AV_CABLE_LOAD:
 		/* Audio Video Cable with load, PATH:AUDIO */
 		ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state(info->edev,
-				"Audio-video-load", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	case MAX77693_MUIC_GND_MHL:
 	case MAX77693_MUIC_GND_MHL_VB:
 		/* MHL or MHL with USB/TA cable */
-		extcon_set_cable_state(info->edev, "MHL", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s cable of gnd type\n",
@@ -642,7 +614,6 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 		int cable_type, bool attached)
 {
-	char cable_name[32];
 	int ret = 0;
 	u8 path = CONTROL1_SW_OPEN;
 
@@ -652,23 +623,13 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 
 	switch (cable_type) {
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
-		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-OFF");
-		path = CONTROL1_SW_USB;
-		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
 		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-ON");
 		path = CONTROL1_SW_USB;
 		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
-		/* PATH:AP_UART */
-		strcpy(cable_name, "JIG-UART-OFF");
-		path = CONTROL1_SW_UART;
-		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* ADC_JIG_UART_ON */
 		/* PATH:AP_UART */
-		strcpy(cable_name, "JIG-UART-ON");
 		path = CONTROL1_SW_UART;
 		break;
 	default:
@@ -681,7 +642,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state(info->edev, cable_name, attached);
+	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -823,22 +784,22 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 		case MAX77693_MUIC_GND_MHL:
 		case MAX77693_MUIC_GND_MHL_VB:
 			/*
-			 * MHL cable with MHL-TA(USB/TA) cable
+			 * MHL cable with USB/TA cable
 			 * - MHL cable include two port(HDMI line and separate
 			 * micro-usb port. When the target connect MHL cable,
-			 * extcon driver check whether MHL-TA(USB/TA) cable is
-			 * connected. If MHL-TA cable is connected, extcon
+			 * extcon driver check whether USB/TA cable is
+			 * connected. If USB/TA cable is connected, extcon
 			 * driver notify state to notifiee for charging battery.
 			 *
-			 * Features of 'MHL-TA(USB/TA) with MHL cable'
+			 * Features of 'USB/TA with MHL cable'
 			 * - Support MHL
 			 * - Support charging through micro-usb port without
 			 *   data connection
 			 */
-			extcon_set_cable_state(info->edev, "MHL-TA", attached);
+			extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 			if (!cable_attached)
-				extcon_set_cable_state(info->edev,
-						      "MHL", cable_attached);
+				extcon_set_cable_state_(info->edev, EXTCON_MHL,
+							cable_attached);
 			break;
 		}
 
@@ -861,11 +822,12 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 * - Support charging through micro-usb port without
 			 *   data connection.
 			 */
-			extcon_set_cable_state(info->edev, "USB", attached);
+			extcon_set_cable_state_(info->edev, EXTCON_USB,
+						attached);
 
 			if (!cable_attached)
-				extcon_set_cable_state(info->edev, "Dock-Audio",
-						      cable_attached);
+				extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+							cable_attached);
 			break;
 		case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
 			/*
@@ -893,10 +855,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;
 
-			extcon_set_cable_state(info->edev, "Dock-Smart",
-					      attached);
-			extcon_set_cable_state(info->edev, "MHL", attached);
-
+			extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+						attached);
+			extcon_set_cable_state_(info->edev, EXTCON_MHL,
+						attached);
 			break;
 		}
 
@@ -929,23 +891,26 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;
 
-			extcon_set_cable_state(info->edev, "USB", attached);
+			extcon_set_cable_state_(info->edev, EXTCON_USB,
+						attached);
 			break;
 		case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
 			/* Only TA cable */
-			extcon_set_cable_state(info->edev, "TA", attached);
+			extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 			break;
 		}
 		break;
 	case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state(info->edev,
-				"Charge-downstream", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_500MA:
-		extcon_set_cable_state(info->edev, "Slow-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
-		extcon_set_cable_state(info->edev, "Fast-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
 		break;
@@ -1182,7 +1147,6 @@ static int max77693_muic_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
 		return -ENOMEM;
 	}
-	info->edev->name = DEV_NAME;
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret) {
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index 8db6a926ea07..fac2f1417a79 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -118,36 +118,16 @@ enum max77843_muic_charger_type {
 	MAX77843_MUIC_CHG_GND,
 };
 
-enum {
-	MAX77843_CABLE_USB = 0,
-	MAX77843_CABLE_USB_HOST,
-	MAX77843_CABLE_TA,
-	MAX77843_CABLE_CHARGE_DOWNSTREAM,
-	MAX77843_CABLE_FAST_CHARGER,
-	MAX77843_CABLE_SLOW_CHARGER,
-	MAX77843_CABLE_MHL,
-	MAX77843_CABLE_MHL_TA,
-	MAX77843_CABLE_JIG_USB_ON,
-	MAX77843_CABLE_JIG_USB_OFF,
-	MAX77843_CABLE_JIG_UART_ON,
-	MAX77843_CABLE_JIG_UART_OFF,
-
-	MAX77843_CABLE_NUM,
-};
-
-static const char *max77843_extcon_cable[] = {
-	[MAX77843_CABLE_USB]			= "USB",
-	[MAX77843_CABLE_USB_HOST]		= "USB-HOST",
-	[MAX77843_CABLE_TA]			= "TA",
-	[MAX77843_CABLE_CHARGE_DOWNSTREAM]	= "CHARGER-DOWNSTREAM",
-	[MAX77843_CABLE_FAST_CHARGER]		= "FAST-CHARGER",
-	[MAX77843_CABLE_SLOW_CHARGER]		= "SLOW-CHARGER",
-	[MAX77843_CABLE_MHL]			= "MHL",
-	[MAX77843_CABLE_MHL_TA]			= "MHL-TA",
-	[MAX77843_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
-	[MAX77843_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
-	[MAX77843_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
-	[MAX77843_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
+static const unsigned int max77843_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_FAST_CHARGER,
+	EXTCON_SLOW_CHARGER,
+	EXTCON_MHL,
+	EXTCON_JIG,
+	EXTCON_NONE,
 };
 
 struct max77843_muic_irq {
@@ -362,7 +342,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "USB-HOST", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77843_MUIC_GND_MHL_VB:
 	case MAX77843_MUIC_GND_MHL:
@@ -370,7 +350,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "MHL", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
@@ -385,36 +365,29 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 		int cable_type, bool attached)
 {
 	int ret;
+	u8 path = CONTROL1_SW_OPEN;
 
 	dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
 			attached ? "attached" : "detached", cable_type);
 
 	switch (cable_type) {
 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
-		if (ret < 0)
-			return ret;
-		extcon_set_cable_state(info->edev, "JIG-USB-OFF", attached);
-		break;
 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
-		if (ret < 0)
-			return ret;
-		extcon_set_cable_state(info->edev, "JIG-USB-ON", attached);
+		path = CONTROL1_SW_USB;
 		break;
 	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_UART, attached);
-		if (ret < 0)
-			return ret;
-		extcon_set_cable_state(info->edev, "JIG-UART-OFF", attached);
+		path = CONTROL1_SW_UART;
 		break;
 	default:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
-		if (ret < 0)
-			return ret;
-		break;
+		return -EINVAL;
 	}
 
+	ret = max77843_muic_set_path(info, path, attached);
+	if (ret < 0)
+		return ret;
+
+	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+
 	return 0;
 }
 
@@ -505,36 +478,38 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "USB", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	case MAX77843_MUIC_CHG_DOWNSTREAM:
 		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev,
-				"CHARGER-DOWNSTREAM", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+					attached);
 		break;
 	case MAX77843_MUIC_CHG_DEDICATED:
 		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "TA", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_500MA:
 		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_1A:
 		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+					attached);
 		break;
 	case MAX77843_MUIC_CHG_GND:
 		gnd_type = max77843_muic_get_cable_type(info,
@@ -542,9 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 
 		/* Charger cable on MHL accessory is attach or detach */
 		if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
-			extcon_set_cable_state(info->edev, "MHL-TA", true);
+			extcon_set_cable_state_(info->edev, EXTCON_TA, true);
 		else if (gnd_type == MAX77843_MUIC_GND_MHL)
-			extcon_set_cable_state(info->edev, "MHL-TA", false);
+			extcon_set_cable_state_(info->edev, EXTCON_TA, false);
 		break;
 	case MAX77843_MUIC_CHG_NONE:
 		break;
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 5774e56c6422..7b1ef200b121 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -145,34 +145,17 @@ struct max8997_muic_info {
 	int path_uart;
 };
 
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-	EXTCON_CABLE_TA,
-	EXTCON_CABLE_FAST_CHARGER,
-	EXTCON_CABLE_SLOW_CHARGER,
-	EXTCON_CABLE_CHARGE_DOWNSTREAM,
-	EXTCON_CABLE_MHL,
-	EXTCON_CABLE_DOCK_DESK,
-	EXTCON_CABLE_DOCK_CARD,
-	EXTCON_CABLE_JIG,
-
-	_EXTCON_CABLE_NUM,
-};
-
-static const char *max8997_extcon_cable[] = {
-	[EXTCON_CABLE_USB]			= "USB",
-	[EXTCON_CABLE_USB_HOST]			= "USB-Host",
-	[EXTCON_CABLE_TA]			= "TA",
-	[EXTCON_CABLE_FAST_CHARGER]		= "Fast-charger",
-	[EXTCON_CABLE_SLOW_CHARGER]		= "Slow-charger",
-	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
-	[EXTCON_CABLE_MHL]			= "MHL",
-	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
-	[EXTCON_CABLE_DOCK_CARD]		= "Dock-Card",
-	[EXTCON_CABLE_JIG]			= "JIG",
-
-	NULL,
+static const unsigned int max8997_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_FAST_CHARGER,
+	EXTCON_SLOW_CHARGER,
+	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_MHL,
+	EXTCON_DOCK,
+	EXTCON_JIG,
+	EXTCON_NONE,
 };
 
 /*
@@ -347,10 +330,10 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 
 	switch (usb_type) {
 	case MAX8997_USB_HOST:
-		extcon_set_cable_state(info->edev, "USB-Host", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX8997_USB_DEVICE:
-		extcon_set_cable_state(info->edev, "USB", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s usb cable\n",
@@ -374,10 +357,8 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 
 	switch (cable_type) {
 	case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
-		extcon_set_cable_state(info->edev, "Dock-desk", attached);
-		break;
 	case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
-		extcon_set_cable_state(info->edev, "Dock-card", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s dock device\n",
@@ -400,7 +381,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 		return ret;
 	}
 
-	extcon_set_cable_state(info->edev, "JIG", attached);
+	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -422,7 +403,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info)
 			return ret;
 		break;
 	case MAX8997_MUIC_ADC_MHL:
-		extcon_set_cable_state(info->edev, "MHL", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
 		break;
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
@@ -505,17 +486,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info)
 		}
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state(info->edev,
-				      "Charge-downstream", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state(info->edev, "TA", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 		break;
 	case MAX8997_CHARGER_TYPE_500MA:
-		extcon_set_cable_state(info->edev, "Slow-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_1A:
-		extcon_set_cable_state(info->edev, "Fast-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+					attached);
 		break;
 	default:
 		dev_err(info->dev,
@@ -700,7 +683,6 @@ static int max8997_muic_probe(struct platform_device *pdev)
 		ret = -ENOMEM;
 		goto err_irq;
 	}
-	info->edev->name = DEV_NAME;
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret) {
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 11c6757b6c40..080d5cc27055 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -29,10 +29,10 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
-static const char *palmas_extcon_cable[] = {
-	[0] = "USB",
-	[1] = "USB-HOST",
-	NULL,
+static const unsigned int palmas_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
 };
 
 static const int mutually_exclusive[] = {0x3, 0x0};
@@ -49,6 +49,7 @@ static void palmas_usb_wakeup(struct palmas *palmas, int enable)
 static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 {
 	struct palmas_usb *palmas_usb = _palmas_usb;
+	struct extcon_dev *edev = palmas_usb->edev;
 	unsigned int vbus_line_state;
 
 	palmas_read(palmas_usb->palmas, PALMAS_INTERRUPT_BASE,
@@ -57,7 +58,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
 		if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
-			extcon_set_cable_state(palmas_usb->edev, "USB", true);
+			extcon_set_cable_state_(edev, EXTCON_USB, true);
 			dev_info(palmas_usb->dev, "USB cable is attached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@@ -66,7 +67,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	} else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
 		if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-			extcon_set_cable_state(palmas_usb->edev, "USB", false);
+			extcon_set_cable_state_(edev, EXTCON_USB, false);
 			dev_info(palmas_usb->dev, "USB cable is detached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@@ -81,6 +82,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 {
 	unsigned int set, id_src;
 	struct palmas_usb *palmas_usb = _palmas_usb;
+	struct extcon_dev *edev = palmas_usb->edev;
 
 	palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
 		PALMAS_USB_ID_INT_LATCH_SET, &set);
@@ -93,7 +95,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
+		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
 	} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
@@ -101,17 +103,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
+		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
 				(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
+		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
+		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
 	}
 
@@ -193,7 +195,6 @@ static int palmas_usb_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
-	palmas_usb->edev->name = kstrdup(node->name, GFP_KERNEL);
 	palmas_usb->edev->mutually_exclusive = mutually_exclusive;
 
 	status = devm_extcon_dev_register(&pdev->dev, palmas_usb->edev);
diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
index 9ccd5af89d1c..92c939221a41 100644
--- a/drivers/extcon/extcon-rt8973a.c
+++ b/drivers/extcon/extcon-rt8973a.c
@@ -90,27 +90,12 @@ static struct reg_data rt8973a_reg_data[] = {
 };
 
 /* List of detectable cables */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-	EXTCON_CABLE_TA,
-	EXTCON_CABLE_JIG_OFF_USB,
-	EXTCON_CABLE_JIG_ON_USB,
-	EXTCON_CABLE_JIG_OFF_UART,
-	EXTCON_CABLE_JIG_ON_UART,
-
-	EXTCON_CABLE_END,
-};
-
-static const char *rt8973a_extcon_cable[] = {
-	[EXTCON_CABLE_USB]		= "USB",
-	[EXTCON_CABLE_USB_HOST]		= "USB-Host",
-	[EXTCON_CABLE_TA]		= "TA",
-	[EXTCON_CABLE_JIG_OFF_USB]	= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_ON_USB]	= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_OFF_UART]	= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_ON_UART]	= "JIG-UART-ON",
-	NULL,
+static const unsigned int rt8973a_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_JIG,
+	EXTCON_NONE,
 };
 
 /* Define OVP (Over Voltage Protection), OTP (Over Temperature Protection) */
@@ -313,14 +298,11 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 					enum rt8973a_event_type event)
 {
 	static unsigned int prev_cable_type;
-	const char **cable_names = info->edev->supported_cable;
 	unsigned int con_sw = DM_DP_SWITCH_UART;
-	int ret, idx = 0, cable_type;
+	int ret, cable_type;
+	unsigned int id;
 	bool attached = false;
 
-	if (!cable_names)
-		return 0;
-
 	switch (event) {
 	case RT8973A_EVENT_ATTACH:
 		cable_type = rt8973a_muic_get_cable_type(info);
@@ -347,31 +329,25 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 
 	switch (cable_type) {
 	case RT8973A_MUIC_ADC_OTG:
-		idx = EXTCON_CABLE_USB_HOST;
+		id = EXTCON_USB_HOST;
 		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_TA:
-		idx = EXTCON_CABLE_TA;
+		id = EXTCON_TA;
 		con_sw = DM_DP_SWITCH_OPEN;
 		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
-		idx = EXTCON_CABLE_JIG_OFF_USB;
-		con_sw = DM_DP_SWITCH_UART;
-		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
-		idx = EXTCON_CABLE_JIG_ON_USB;
-		con_sw = DM_DP_SWITCH_UART;
+		id = EXTCON_JIG;
+		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
-		idx = EXTCON_CABLE_JIG_OFF_UART;
-		con_sw = DM_DP_SWITCH_UART;
-		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
-		idx = EXTCON_CABLE_JIG_ON_UART;
+		id = EXTCON_JIG;
 		con_sw = DM_DP_SWITCH_UART;
 		break;
 	case RT8973A_MUIC_ADC_USB:
-		idx = EXTCON_CABLE_USB;
+		id = EXTCON_USB;
 		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_OPEN:
@@ -421,7 +397,7 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 		return ret;
 
 	/* Change the state of external accessory */
-	extcon_set_cable_state(info->edev, cable_names[idx], attached);
+	extcon_set_cable_state_(info->edev, id, attached);
 
 	return 0;
 }
@@ -643,7 +619,6 @@ static int rt8973a_muic_i2c_probe(struct i2c_client *i2c,
 		dev_err(info->dev, "failed to allocate memory for extcon\n");
 		return -ENOMEM;
 	}
-	info->edev->name = np->name;
 
 	/* Register extcon device */
 	ret = devm_extcon_dev_register(info->dev, info->edev);
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 2f93cf307852..817dece23b4c 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -92,19 +92,11 @@ static struct reg_data sm5502_reg_data[] = {
 };
 
 /* List of detectable cables */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-	EXTCON_CABLE_TA,
-
-	EXTCON_CABLE_END,
-};
-
-static const char *sm5502_extcon_cable[] = {
-	[EXTCON_CABLE_USB]	= "USB",
-	[EXTCON_CABLE_USB_HOST]	= "USB-Host",
-	[EXTCON_CABLE_TA]	= "TA",
-	NULL,
+static const unsigned int sm5502_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_NONE,
 };
 
 /* Define supported accessory type */
@@ -377,16 +369,12 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 				     bool attached)
 {
 	static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
-	const char **cable_names = info->edev->supported_cable;
 	unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
 	unsigned int con_sw = DM_DP_SWITCH_OPEN;
 	unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
-	unsigned int idx = 0;
+	unsigned int id;
 	int ret;
 
-	if (!cable_names)
-		return 0;
-
 	/* Get the type of attached or detached cable */
 	if (attached)
 		cable_type = sm5502_muic_get_cable_type(info);
@@ -396,17 +384,17 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 
 	switch (cable_type) {
 	case SM5502_MUIC_ADC_OPEN_USB:
-		idx	= EXTCON_CABLE_USB;
+		id	= EXTCON_USB;
 		con_sw	= DM_DP_SWITCH_USB;
 		vbus_sw	= VBUSIN_SWITCH_VBUSOUT_WITH_USB;
 		break;
 	case SM5502_MUIC_ADC_OPEN_TA:
-		idx	= EXTCON_CABLE_TA;
+		id	= EXTCON_TA;
 		con_sw	= DM_DP_SWITCH_OPEN;
 		vbus_sw	= VBUSIN_SWITCH_VBUSOUT;
 		break;
 	case SM5502_MUIC_ADC_OPEN_USB_OTG:
-		idx	= EXTCON_CABLE_USB_HOST;
+		id	= EXTCON_USB_HOST;
 		con_sw	= DM_DP_SWITCH_USB;
 		vbus_sw	= VBUSIN_SWITCH_OPEN;
 		break;
@@ -422,7 +410,7 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 		return ret;
 
 	/* Change the state of external accessory */
-	extcon_set_cable_state(info->edev, cable_names[idx], attached);
+	extcon_set_cable_state_(info->edev, id, attached);
 
 	return 0;
 }
@@ -623,7 +611,6 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
 		dev_err(info->dev, "failed to allocate memory for extcon\n");
 		return -ENOMEM;
 	}
-	info->edev->name = np->name;
 
 	/* Register extcon device */
 	ret = devm_extcon_dev_register(info->dev, info->edev);
diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
index e45d1f13f445..a2a44536a608 100644
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/extcon.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -38,18 +39,10 @@ struct usb_extcon_info {
 	struct delayed_work wq_detcable;
 };
 
-/* List of detectable cables */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-
-	EXTCON_CABLE_END,
-};
-
-static const char *usb_extcon_cable[] = {
-	[EXTCON_CABLE_USB] = "USB",
-	[EXTCON_CABLE_USB_HOST] = "USB-HOST",
-	NULL,
+static const unsigned int usb_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
 };
 
 static void usb_extcon_detect_cable(struct work_struct *work)
@@ -67,24 +60,16 @@ static void usb_extcon_detect_cable(struct work_struct *work)
 		 * As we don't have event for USB peripheral cable attached,
 		 * we simulate USB peripheral attach here.
 		 */
-		extcon_set_cable_state(info->edev,
-				       usb_extcon_cable[EXTCON_CABLE_USB_HOST],
-				       false);
-		extcon_set_cable_state(info->edev,
-				       usb_extcon_cable[EXTCON_CABLE_USB],
-				       true);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, true);
 	} else {
 		/*
 		 * ID = 0 means USB HOST cable attached.
 		 * As we don't have event for USB peripheral cable detached,
 		 * we simulate USB peripheral detach here.
 		 */
-		extcon_set_cable_state(info->edev,
-				       usb_extcon_cable[EXTCON_CABLE_USB],
-				       false);
-		extcon_set_cable_state(info->edev,
-				       usb_extcon_cable[EXTCON_CABLE_USB_HOST],
-				       true);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, false);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);
 	}
 }
 
@@ -113,7 +98,7 @@ static int usb_extcon_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	info->dev = dev;
-	info->id_gpiod = devm_gpiod_get(&pdev->dev, "id");
+	info->id_gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN);
 	if (IS_ERR(info->id_gpiod)) {
 		dev_err(dev, "failed to get ID GPIO\n");
 		return PTR_ERR(info->id_gpiod);
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 4c9f165e4a04..76157ab9faf3 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -1,8 +1,11 @@
 /*
- *  drivers/extcon/extcon_class.c
+ *  drivers/extcon/extcon.c - External Connector (extcon) framework.
  *
  *  External connector (extcon) class driver
  *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
  * Copyright (C) 2012 Samsung Electronics
  * Author: Donggeun Kim <dg77.kim@samsung.com>
  * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
@@ -19,8 +22,7 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
-*/
+ */
 
 #include <linux/module.h>
 #include <linux/types.h>
@@ -33,36 +35,43 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 
-/*
- * extcon_cable_name suggests the standard cable names for commonly used
- * cable types.
- *
- * However, please do not use extcon_cable_name directly for extcon_dev
- * struct's supported_cable pointer unless your device really supports
- * every single port-type of the following cable names. Please choose cable
- * names that are actually used in your extcon device.
- */
-const char extcon_cable_name[][CABLE_NAME_MAX + 1] = {
+#define SUPPORTED_CABLE_MAX	32
+#define CABLE_NAME_MAX		30
+
+static const char *extcon_name[] =  {
+	[EXTCON_NONE]		= "NONE",
+
+	/* USB external connector */
 	[EXTCON_USB]		= "USB",
-	[EXTCON_USB_HOST]	= "USB-Host",
+	[EXTCON_USB_HOST]	= "USB-HOST",
+
+	/* Charger external connector */
 	[EXTCON_TA]		= "TA",
-	[EXTCON_FAST_CHARGER]	= "Fast-charger",
-	[EXTCON_SLOW_CHARGER]	= "Slow-charger",
-	[EXTCON_CHARGE_DOWNSTREAM]	= "Charge-downstream",
+	[EXTCON_FAST_CHARGER]	= "FAST-CHARGER",
+	[EXTCON_SLOW_CHARGER]	= "SLOW-CHARGER",
+	[EXTCON_CHARGE_DOWNSTREAM] = "CHARGE-DOWNSTREAM",
+
+	/* Audio/Video external connector */
+	[EXTCON_LINE_IN]	= "LINE-IN",
+	[EXTCON_LINE_OUT]	= "LINE-OUT",
+	[EXTCON_MICROPHONE]	= "MICROPHONE",
+	[EXTCON_HEADPHONE]	= "HEADPHONE",
+
 	[EXTCON_HDMI]		= "HDMI",
 	[EXTCON_MHL]		= "MHL",
 	[EXTCON_DVI]		= "DVI",
 	[EXTCON_VGA]		= "VGA",
-	[EXTCON_DOCK]		= "Dock",
-	[EXTCON_LINE_IN]	= "Line-in",
-	[EXTCON_LINE_OUT]	= "Line-out",
-	[EXTCON_MIC_IN]		= "Microphone",
-	[EXTCON_HEADPHONE_OUT]	= "Headphone",
-	[EXTCON_SPDIF_IN]	= "SPDIF-in",
-	[EXTCON_SPDIF_OUT]	= "SPDIF-out",
-	[EXTCON_VIDEO_IN]	= "Video-in",
-	[EXTCON_VIDEO_OUT]	= "Video-out",
-	[EXTCON_MECHANICAL]	= "Mechanical",
+	[EXTCON_SPDIF_IN]	= "SPDIF-IN",
+	[EXTCON_SPDIF_OUT]	= "SPDIF-OUT",
+	[EXTCON_VIDEO_IN]	= "VIDEO-IN",
+	[EXTCON_VIDEO_OUT]	= "VIDEO-OUT",
+
+	/* Etc external connector */
+	[EXTCON_DOCK]		= "DOCK",
+	[EXTCON_JIG]		= "JIG",
+	[EXTCON_MECHANICAL]	= "MECHANICAL",
+
+	NULL,
 };
 
 static struct class *extcon_class;
@@ -102,6 +111,51 @@ static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
 	return 0;
 }
 
+static int find_cable_index_by_id(struct extcon_dev *edev, const unsigned int id)
+{
+	int i;
+
+	/* Find the the index of extcon cable in edev->supported_cable */
+	for (i = 0; i < edev->max_supported; i++) {
+		if (edev->supported_cable[i] == id)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int find_cable_index_by_name(struct extcon_dev *edev, const char *name)
+{
+	unsigned int id = EXTCON_NONE;
+	int i = 0;
+
+	if (edev->max_supported == 0)
+		return -EINVAL;
+
+	/* Find the the number of extcon cable */
+	while (extcon_name[i]) {
+		if (!strncmp(extcon_name[i], name, CABLE_NAME_MAX)) {
+			id = i;
+			break;
+		}
+	}
+
+	if (id == EXTCON_NONE)
+		return -EINVAL;
+
+	return find_cable_index_by_id(edev, id);
+}
+
+static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
+{
+	if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) {
+		*attached = new ? true : false;
+		return true;
+	}
+
+	return false;
+}
+
 static ssize_t state_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
@@ -119,11 +173,9 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr,
 	if (edev->max_supported == 0)
 		return sprintf(buf, "%u\n", edev->state);
 
-	for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
-		if (!edev->supported_cable[i])
-			break;
+	for (i = 0; i < edev->max_supported; i++) {
 		count += sprintf(buf + count, "%s=%d\n",
-				 edev->supported_cable[i],
+				extcon_name[edev->supported_cable[i]],
 				 !!(edev->state & (1 << i)));
 	}
 
@@ -155,15 +207,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 {
 	struct extcon_dev *edev = dev_get_drvdata(dev);
 
-	/* Optional callback given by the user */
-	if (edev->print_name) {
-		int ret = edev->print_name(edev, buf);
-
-		if (ret >= 0)
-			return ret;
-	}
-
-	return sprintf(buf, "%s\n", dev_name(&edev->dev));
+	return sprintf(buf, "%s\n", edev->name);
 }
 static DEVICE_ATTR_RO(name);
 
@@ -172,9 +216,10 @@ static ssize_t cable_name_show(struct device *dev,
 {
 	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
 						  attr_name);
+	int i = cable->cable_index;
 
 	return sprintf(buf, "%s\n",
-		       cable->edev->supported_cable[cable->cable_index]);
+			extcon_name[cable->edev->supported_cable[i]]);
 }
 
 static ssize_t cable_state_show(struct device *dev,
@@ -211,23 +256,27 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 	char *envp[3];
 	int env_offset = 0;
 	int length;
+	int index;
 	unsigned long flags;
+	bool attached;
 
 	spin_lock_irqsave(&edev->lock, flags);
 
 	if (edev->state != ((edev->state & ~mask) | (state & mask))) {
-		u32 old_state = edev->state;
-
 		if (check_mutually_exclusive(edev, (edev->state & ~mask) |
 						   (state & mask))) {
 			spin_unlock_irqrestore(&edev->lock, flags);
 			return -EPERM;
 		}
 
+		for (index = 0; index < edev->max_supported; index++) {
+			if (is_extcon_changed(edev->state, state, index, &attached))
+				raw_notifier_call_chain(&edev->nh[index], attached, edev);
+		}
+
 		edev->state &= ~mask;
 		edev->state |= state & mask;
 
-		raw_notifier_call_chain(&edev->nh, old_state, edev);
 		/* This could be in interrupt handler */
 		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
 		if (prop_buf) {
@@ -284,39 +333,19 @@ int extcon_set_state(struct extcon_dev *edev, u32 state)
 EXPORT_SYMBOL_GPL(extcon_set_state);
 
 /**
- * extcon_find_cable_index() - Get the cable index based on the cable name.
+ * extcon_get_cable_state_() - Get the status of a specific cable.
  * @edev:	the extcon device that has the cable.
- * @cable_name:	cable name to be searched.
- *
- * Note that accessing a cable state based on cable_index is faster than
- * cable_name because using cable_name induces a loop with strncmp().
- * Thus, when get/set_cable_state is repeatedly used, using cable_index
- * is recommended.
+ * @id:		the unique id of each external connector in extcon enumeration.
  */
-int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
+int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
 {
-	int i;
+	int index;
 
-	if (edev->supported_cable) {
-		for (i = 0; edev->supported_cable[i]; i++) {
-			if (!strncmp(edev->supported_cable[i],
-				cable_name, CABLE_NAME_MAX))
-				return i;
-		}
-	}
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
 
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(extcon_find_cable_index);
-
-/**
- * extcon_get_cable_state_() - Get the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @index:	cable index that can be retrieved by extcon_find_cable_index().
- */
-int extcon_get_cable_state_(struct extcon_dev *edev, int index)
-{
-	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+	if (edev->max_supported && edev->max_supported <= index)
 		return -EINVAL;
 
 	return !!(edev->state & (1 << index));
@@ -332,7 +361,7 @@ EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
  */
 int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name)
 {
-	return extcon_get_cable_state_(edev, extcon_find_cable_index
+	return extcon_get_cable_state_(edev, find_cable_index_by_name
 						(edev, cable_name));
 }
 EXPORT_SYMBOL_GPL(extcon_get_cable_state);
@@ -340,17 +369,22 @@ EXPORT_SYMBOL_GPL(extcon_get_cable_state);
 /**
  * extcon_set_cable_state_() - Set the status of a specific cable.
  * @edev:		the extcon device that has the cable.
- * @index:		cable index that can be retrieved by
- *			extcon_find_cable_index().
- * @cable_state:	the new cable status. The default semantics is
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @state:		the new cable status. The default semantics is
  *			true: attached / false: detached.
  */
-int extcon_set_cable_state_(struct extcon_dev *edev,
-			int index, bool cable_state)
+int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
 {
 	u32 state;
+	int index;
+
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
 
-	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+	if (edev->max_supported && edev->max_supported <= index)
 		return -EINVAL;
 
 	state = cable_state ? (1 << index) : 0;
@@ -370,7 +404,7 @@ EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
 int extcon_set_cable_state(struct extcon_dev *edev,
 			const char *cable_name, bool cable_state)
 {
-	return extcon_set_cable_state_(edev, extcon_find_cable_index
+	return extcon_set_cable_state_(edev, find_cable_index_by_name
 					(edev, cable_name), cable_state);
 }
 EXPORT_SYMBOL_GPL(extcon_set_cable_state);
@@ -395,29 +429,6 @@ out:
 }
 EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);
 
-static int _call_per_cable(struct notifier_block *nb, unsigned long val,
-			   void *ptr)
-{
-	struct extcon_specific_cable_nb *obj = container_of(nb,
-			struct extcon_specific_cable_nb, internal_nb);
-	struct extcon_dev *edev = ptr;
-
-	if ((val & (1 << obj->cable_index)) !=
-	    (edev->state & (1 << obj->cable_index))) {
-		bool cable_state = true;
-
-		obj->previous_value = val;
-
-		if (val & (1 << obj->cable_index))
-			cable_state = false;
-
-		return obj->user_nb->notifier_call(obj->user_nb,
-				cable_state, ptr);
-	}
-
-	return NOTIFY_OK;
-}
-
 /**
  * extcon_register_interest() - Register a notifier for a state change of a
  *				specific cable, not an entier set of cables of a
@@ -456,20 +467,18 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
 		if (!obj->edev)
 			return -ENODEV;
 
-		obj->cable_index = extcon_find_cable_index(obj->edev,
-							  cable_name);
+		obj->cable_index = find_cable_index_by_name(obj->edev,
+							cable_name);
 		if (obj->cable_index < 0)
 			return obj->cable_index;
 
 		obj->user_nb = nb;
 
-		obj->internal_nb.notifier_call = _call_per_cable;
-
 		spin_lock_irqsave(&obj->edev->lock, flags);
-		ret = raw_notifier_chain_register(&obj->edev->nh,
-						  &obj->internal_nb);
+		ret = raw_notifier_chain_register(
+					&obj->edev->nh[obj->cable_index],
+					obj->user_nb);
 		spin_unlock_irqrestore(&obj->edev->lock, flags);
-		return ret;
 	} else {
 		struct class_dev_iter iter;
 		struct extcon_dev *extd;
@@ -481,7 +490,7 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
 		while ((dev = class_dev_iter_next(&iter))) {
 			extd = dev_get_drvdata(dev);
 
-			if (extcon_find_cable_index(extd, cable_name) < 0)
+			if (find_cable_index_by_name(extd, cable_name) < 0)
 				continue;
 
 			class_dev_iter_exit(&iter);
@@ -489,8 +498,10 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
 						cable_name, nb);
 		}
 
-		return -ENODEV;
+		ret = -ENODEV;
 	}
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(extcon_register_interest);
 
@@ -509,7 +520,8 @@ int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
 		return -EINVAL;
 
 	spin_lock_irqsave(&obj->edev->lock, flags);
-	ret = raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
+	ret = raw_notifier_chain_unregister(
+			&obj->edev->nh[obj->cable_index], obj->user_nb);
 	spin_unlock_irqrestore(&obj->edev->lock, flags);
 
 	return ret;
@@ -519,21 +531,24 @@ EXPORT_SYMBOL_GPL(extcon_unregister_interest);
 /**
  * extcon_register_notifier() - Register a notifiee to get notified by
  *				any attach status changes from the extcon.
- * @edev:	the extcon device.
+ * @edev:	the extcon device that has the external connecotr.
+ * @id:		the unique id of each external connector in extcon enumeration.
  * @nb:		a notifier block to be registered.
  *
  * Note that the second parameter given to the callback of nb (val) is
  * "old_state", not the current state. The current state can be retrieved
  * by looking at the third pameter (edev pointer)'s state value.
  */
-int extcon_register_notifier(struct extcon_dev *edev,
-			struct notifier_block *nb)
+int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
+			     struct notifier_block *nb)
 {
 	unsigned long flags;
-	int ret;
+	int ret, idx;
+
+	idx = find_cable_index_by_id(edev, id);
 
 	spin_lock_irqsave(&edev->lock, flags);
-	ret = raw_notifier_chain_register(&edev->nh, nb);
+	ret = raw_notifier_chain_register(&edev->nh[idx], nb);
 	spin_unlock_irqrestore(&edev->lock, flags);
 
 	return ret;
@@ -542,17 +557,20 @@ EXPORT_SYMBOL_GPL(extcon_register_notifier);
 
 /**
  * extcon_unregister_notifier() - Unregister a notifiee from the extcon device.
- * @edev:	the extcon device.
- * @nb:		a registered notifier block to be unregistered.
+ * @edev:	the extcon device that has the external connecotr.
+ * @id:		the unique id of each external connector in extcon enumeration.
+ * @nb:		a notifier block to be registered.
  */
-int extcon_unregister_notifier(struct extcon_dev *edev,
-			struct notifier_block *nb)
+int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id,
+				struct notifier_block *nb)
 {
 	unsigned long flags;
-	int ret;
+	int ret, idx;
+
+	idx = find_cable_index_by_id(edev, id);
 
 	spin_lock_irqsave(&edev->lock, flags);
-	ret = raw_notifier_chain_unregister(&edev->nh, nb);
+	ret = raw_notifier_chain_unregister(&edev->nh[idx], nb);
 	spin_unlock_irqrestore(&edev->lock, flags);
 
 	return ret;
@@ -595,7 +613,7 @@ static void dummy_sysfs_dev_release(struct device *dev)
 
 /*
  * extcon_dev_allocate() - Allocate the memory of extcon device.
- * @supported_cable:	Array of supported cable names ending with NULL.
+ * @supported_cable:	Array of supported extcon ending with EXTCON_NONE.
  *			If supported_cable is NULL, cable name related APIs
  *			are disabled.
  *
@@ -605,7 +623,7 @@ static void dummy_sysfs_dev_release(struct device *dev)
  *
  * Return the pointer of extcon device if success or ERR_PTR(err) if fail
  */
-struct extcon_dev *extcon_dev_allocate(const char **supported_cable)
+struct extcon_dev *extcon_dev_allocate(const unsigned int *supported_cable)
 {
 	struct extcon_dev *edev;
 
@@ -647,7 +665,7 @@ static void devm_extcon_dev_release(struct device *dev, void *res)
 /**
  * devm_extcon_dev_allocate - Allocate managed extcon device
  * @dev:		device owning the extcon device being created
- * @supported_cable:	Array of supported cable names ending with NULL.
+ * @supported_cable:	Array of supported extcon ending with EXTCON_NONE.
  *			If supported_cable is NULL, cable name related APIs
  *			are disabled.
  *
@@ -659,7 +677,7 @@ static void devm_extcon_dev_release(struct device *dev, void *res)
  * or ERR_PTR(err) if fail
  */
 struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
-					    const char **supported_cable)
+					const unsigned int *supported_cable)
 {
 	struct extcon_dev **ptr, *edev;
 
@@ -701,6 +719,7 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_free);
 int extcon_dev_register(struct extcon_dev *edev)
 {
 	int ret, index = 0;
+	static atomic_t edev_no = ATOMIC_INIT(-1);
 
 	if (!extcon_class) {
 		ret = create_extcon_class();
@@ -708,30 +727,29 @@ int extcon_dev_register(struct extcon_dev *edev)
 			return ret;
 	}
 
-	if (edev->supported_cable) {
-		/* Get size of array */
-		for (index = 0; edev->supported_cable[index]; index++)
-			;
-		edev->max_supported = index;
-	} else {
-		edev->max_supported = 0;
-	}
+	if (!edev->supported_cable)
+		return -EINVAL;
+
+	for (; edev->supported_cable[index] != EXTCON_NONE; index++);
 
+	edev->max_supported = index;
 	if (index > SUPPORTED_CABLE_MAX) {
-		dev_err(&edev->dev, "extcon: maximum number of supported cables exceeded.\n");
+		dev_err(&edev->dev,
+			"exceed the maximum number of supported cables\n");
 		return -EINVAL;
 	}
 
 	edev->dev.class = extcon_class;
 	edev->dev.release = extcon_dev_release;
 
-	edev->name = edev->name ? edev->name : dev_name(edev->dev.parent);
+	edev->name = dev_name(edev->dev.parent);
 	if (IS_ERR_OR_NULL(edev->name)) {
 		dev_err(&edev->dev,
 			"extcon device name is null\n");
 		return -EINVAL;
 	}
-	dev_set_name(&edev->dev, "%s", edev->name);
+	dev_set_name(&edev->dev, "extcon%lu",
+			(unsigned long)atomic_inc_return(&edev_no));
 
 	if (edev->max_supported) {
 		char buf[10];
@@ -864,7 +882,15 @@ int extcon_dev_register(struct extcon_dev *edev)
 
 	spin_lock_init(&edev->lock);
 
-	RAW_INIT_NOTIFIER_HEAD(&edev->nh);
+	edev->nh = devm_kzalloc(&edev->dev,
+			sizeof(*edev->nh) * edev->max_supported, GFP_KERNEL);
+	if (!edev->nh) {
+		ret = -ENOMEM;
+		goto err_dev;
+	}
+
+	for (index = 0; index < edev->max_supported; index++)
+		RAW_INIT_NOTIFIER_HEAD(&edev->nh[index]);
 
 	dev_set_drvdata(&edev->dev, edev);
 	edev->state = 0;
@@ -1044,6 +1070,15 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
 #endif /* CONFIG_OF */
 EXPORT_SYMBOL_GPL(extcon_get_edev_by_phandle);
 
+/**
+ * extcon_get_edev_name() - Get the name of the extcon device.
+ * @edev:	the extcon device
+ */
+const char *extcon_get_edev_name(struct extcon_dev *edev)
+{
+	return !edev ? NULL : edev->name;
+}
+
 static int __init extcon_class_init(void)
 {
 	return create_extcon_class();
@@ -1059,6 +1094,7 @@ static void __exit extcon_class_exit(void)
 }
 module_exit(extcon_class_exit);
 
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
 MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");