diff options
| author | Moritz Fischer <mdf@kernel.org> | 2017-02-27 09:19:01 -0600 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-03-17 15:10:48 +0900 |
| commit | 7f33bbca14de25f24660441af5087440dd0d2fca (patch) | |
| tree | f9c1759ea3a1f0644f28bcf259b9a4a7c3501339 /drivers/fpga/zynq-fpga.c | |
| parent | 0f4f0c8ff1da9171bca0dc01ce5551e8b6d2f0f3 (diff) | |
| download | linux-next-7f33bbca14de25f24660441af5087440dd0d2fca.tar.gz | |
fpga: zynq: Add support for encrypted bitstreams
Add support for encrypted bitstreams. For this to work the system
must be booted in secure mode.
In order for on-the-fly decryption to work, the PCAP clock rate
needs to be lowered via the PCAP_RATE_EN bit.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/fpga/zynq-fpga.c')
| -rw-r--r-- | drivers/fpga/zynq-fpga.c | 28 |
1 files changed, 25 insertions, 3 deletions
diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c index 34cb98139442..70b15b303471 100644 --- a/drivers/fpga/zynq-fpga.c +++ b/drivers/fpga/zynq-fpga.c @@ -72,6 +72,10 @@ #define CTRL_PCAP_PR_MASK BIT(27) /* Enable PCAP */ #define CTRL_PCAP_MODE_MASK BIT(26) +/* Lower rate to allow decrypt on the fly */ +#define CTRL_PCAP_RATE_EN_MASK BIT(25) +/* System booted in secure mode */ +#define CTRL_SEC_EN_MASK BIT(7) /* Miscellaneous Control Register bit definitions */ /* Internal PCAP loopback */ @@ -266,6 +270,17 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, if (err) return err; + /* check if bitstream is encrypted & and system's still secure */ + if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM) { + ctrl = zynq_fpga_read(priv, CTRL_OFFSET); + if (!(ctrl & CTRL_SEC_EN_MASK)) { + dev_err(&mgr->dev, + "System not secure, can't use crypted bitstreams\n"); + err = -EINVAL; + goto out_err; + } + } + /* don't globally reset PL if we're doing partial reconfig */ if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) { if (!zynq_fpga_has_sync(buf, count)) { @@ -337,12 +352,19 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, /* set configuration register with following options: * - enable PCAP interface - * - set throughput for maximum speed + * - set throughput for maximum speed (if bistream not crypted) * - set CPU in user mode */ ctrl = zynq_fpga_read(priv, CTRL_OFFSET); - zynq_fpga_write(priv, CTRL_OFFSET, - (CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK | ctrl)); + if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM) + zynq_fpga_write(priv, CTRL_OFFSET, + (CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK + | CTRL_PCAP_RATE_EN_MASK | ctrl)); + else + zynq_fpga_write(priv, CTRL_OFFSET, + (CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK + | ctrl)); + /* We expect that the command queue is empty right now. */ status = zynq_fpga_read(priv, STATUS_OFFSET); |