diff options
| author | Nicolas Saenz Julienne <nicolassaenzj@gmail.com> | 2016-01-30 17:06:44 +0000 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2016-02-11 12:25:16 +0100 |
| commit | c366c76a2c41d0c545e51b53056b21515db32e77 (patch) | |
| tree | 9fa04f3eb2a7eabdccc0c24e1b891b1458457b15 /drivers/gpio/Makefile | |
| parent | b866526d0cfe0c5b906f9f038f3f550efe30c9d0 (diff) | |
| download | linux-next-c366c76a2c41d0c545e51b53056b21515db32e77.tar.gz | |
gpio: add tps65218 gpio
Driver for the GPIO block found in ti's tps65218 pmics.
The device has two GPIOs and one GPO pin which can be configured as follows:
GPIO1:
-general-purpose, open-drain output controlled by GPO1 user bit and/or
sequencer
-DDR3 reset input signal from SOC. Signal is either latched or
passed-trough to GPO2 pin. See below for details.
GPO2:
-general-purpose output controlled by GPO2 user bit
-DDR3 reset output signal. Signal is controlled by GPIO1 and PGOOD.
See below for details.
-Output buffer can be configured as open-drain or push-pull.
GPIO3:
-general-purpose, open-drain output controlled by GPO3 user bit and/or
sequencer
-reset input-signal for DCDC1 and DCDC2.
The input configurations are not meant to be used by the user so the driver
only offers GPOs.
v2: Added request routine that evaluates the fw config flags and removed module
owner
v3: Added .direction_input() routine, and took care of all Linus Walleij
suggestions (clamp to bool, use proper include)
Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio/Makefile')
| -rw-r--r-- | drivers/gpio/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 8d4960390f0d..f1d3d823d1bc 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -98,6 +98,7 @@ obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o obj-$(CONFIG_GPIO_TPIC2810) += gpio-tpic2810.o +obj-$(CONFIG_GPIO_TPS65218) += gpio-tps65218.o obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o |