summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-nomadik.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-04 14:02:09 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-04 14:02:09 -0700
commit98f486f18d16e2214728d101ed8b6a12dce75539 (patch)
tree987e2fcbd6089a94a00e489cd62fec1b8b10cd02 /drivers/i2c/busses/i2c-nomadik.c
parent84cbd7222b2b00dcddef3103203986b3d59c836a (diff)
parent97191d734f6ac028e5e6dcd574378c1544a16c0b (diff)
downloadlinux-next-98f486f18d16e2214728d101ed8b6a12dce75539.tar.gz
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - new drivers: Kontron PLD, Wondermedia VT - mv64xxx driver gained sun4i support and a bigger cleanup - duplicate driver 'intel-mid' removed - added generic device tree binding for sda holding time (and designware driver already uses it) - we tried to allow driver probing with only device tree and no i2c ids, but I had to revert it because of side effects. Needs some rethinking. - driver bugfixes, cleanups... * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c-designware: use div_u64 to fix link i2c: Kontron PLD i2c bus driver i2c: iop3xxx: fix build failure after waitqueue changes i2c-designware: make SDA hold time configurable i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided i2c: imx: allow autoloading on dt ids i2c: mv64xxx: Fix transfer error code i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs i2c: omap: correct usage of the interrupt enable register i2c-pxa: prepare clock before use Revert "i2c: core: make it possible to match a pure device tree driver" i2c: nomadik: allocate adapter number dynamically i2c: nomadik: support elder Nomadiks i2c: mv64xxx: Add Allwinner sun4i compatible i2c: mv64xxx: make the registers offset configurable i2c: mv64xxx: Add macros to access parts of registers i2c: vt8500: Add support for I2C bus on Wondermedia SoCs i2c: designware: fix race between subsequent xfers i2c: bfin-twi: Read and write the FIFO in loop i2c: core: make it possible to match a pure device tree driver ...
Diffstat (limited to 'drivers/i2c/busses/i2c-nomadik.c')
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c52
1 files changed, 43 insertions, 9 deletions
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index c7e3b0c1a1ca..512dfe609706 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/amba/bus.h>
-#include <linux/atomic.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
@@ -106,6 +105,16 @@
/* maximum threshold value */
#define MAX_I2C_FIFO_THRESHOLD 15
+/**
+ * struct i2c_vendor_data - per-vendor variations
+ * @has_mtdws: variant has the MTDWS bit
+ * @fifodepth: variant FIFO depth
+ */
+struct i2c_vendor_data {
+ bool has_mtdws;
+ u32 fifodepth;
+};
+
enum i2c_status {
I2C_NOP,
I2C_ON_GOING,
@@ -138,6 +147,7 @@ struct i2c_nmk_client {
/**
* struct nmk_i2c_dev - private data structure of the controller.
+ * @vendor: vendor data for this variant.
* @adev: parent amba device.
* @adap: corresponding I2C adapter.
* @irq: interrupt line for the controller.
@@ -151,6 +161,7 @@ struct i2c_nmk_client {
* @busy: Busy doing transfer.
*/
struct nmk_i2c_dev {
+ struct i2c_vendor_data *vendor;
struct amba_device *adev;
struct i2c_adapter adap;
int irq;
@@ -422,7 +433,7 @@ static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF |
I2C_IT_MAL | I2C_IT_BERR);
- if (dev->stop)
+ if (dev->stop || !dev->vendor->has_mtdws)
irq_mask |= I2C_IT_MTD;
else
irq_mask |= I2C_IT_MTDWS;
@@ -502,7 +513,7 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
* set the MTDWS bit (Master Transaction Done Without Stop)
* to start repeated start operation
*/
- if (dev->stop)
+ if (dev->stop || !dev->vendor->has_mtdws)
irq_mask |= I2C_IT_MTD;
else
irq_mask |= I2C_IT_MTDWS;
@@ -929,8 +940,6 @@ static void nmk_i2c_of_probe(struct device_node *np,
pdata->sm = I2C_FREQ_MODE_FAST;
}
-static atomic_t adapter_id = ATOMIC_INIT(0);
-
static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
@@ -938,6 +947,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
struct device_node *np = adev->dev.of_node;
struct nmk_i2c_dev *dev;
struct i2c_adapter *adap;
+ struct i2c_vendor_data *vendor = id->data;
+ u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
if (!pdata) {
if (np) {
@@ -954,12 +965,25 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
pdata = &u8500_i2c;
}
+ if (pdata->tft > max_fifo_threshold) {
+ dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
+ pdata->tft, max_fifo_threshold);
+ pdata->tft = max_fifo_threshold;
+ }
+
+ if (pdata->rft > max_fifo_threshold) {
+ dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
+ pdata->rft, max_fifo_threshold);
+ pdata->rft = max_fifo_threshold;
+ }
+
dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
if (!dev) {
dev_err(&adev->dev, "cannot allocate memory\n");
ret = -ENOMEM;
goto err_no_mem;
}
+ dev->vendor = vendor;
dev->busy = false;
dev->adev = adev;
amba_set_drvdata(adev, dev);
@@ -999,10 +1023,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &nmk_i2c_algo;
adap->timeout = msecs_to_jiffies(pdata->timeout);
- adap->nr = atomic_read(&adapter_id);
snprintf(adap->name, sizeof(adap->name),
- "Nomadik I2C%d at %pR", adap->nr, &adev->res);
- atomic_inc(&adapter_id);
+ "Nomadik I2C at %pR", &adev->res);
/* fetch the controller configuration from machine */
dev->cfg.clk_freq = pdata->clk_freq;
@@ -1017,7 +1039,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
"initialize %s on virtual base %p\n",
adap->name, dev->virtbase);
- ret = i2c_add_numbered_adapter(adap);
+ ret = i2c_add_adapter(adap);
if (ret) {
dev_err(&adev->dev, "failed to add adapter\n");
goto err_add_adap;
@@ -1064,14 +1086,26 @@ static int nmk_i2c_remove(struct amba_device *adev)
return 0;
}
+static struct i2c_vendor_data vendor_stn8815 = {
+ .has_mtdws = false,
+ .fifodepth = 16, /* Guessed from TFTR/RFTR = 7 */
+};
+
+static struct i2c_vendor_data vendor_db8500 = {
+ .has_mtdws = true,
+ .fifodepth = 32, /* Guessed from TFTR/RFTR = 15 */
+};
+
static struct amba_id nmk_i2c_ids[] = {
{
.id = 0x00180024,
.mask = 0x00ffffff,
+ .data = &vendor_stn8815,
},
{
.id = 0x00380024,
.mask = 0x00ffffff,
+ .data = &vendor_db8500,
},
{},
};