Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input

* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
  Input: move USB miscellaneous devices under drivers/input/misc
  Input: move USB mice under drivers/input/mouse
  Input: move USB gamepads under drivers/input/joystick
  Input: move USB touchscreens under drivers/input/touchscreen
  Input: move USB tablets under drivers/input/tablet
  Input: i8042 - fix AUX port detection with some chips
  Input: aaed2000_kbd - convert to use polldev library
  Input: drivers/usb/input - usb_buffer_free() cleanup
  Input: synaptics - don't complain about failed resets
  Input: pull input.h into uinpit.h
  Input: drivers/usb/input - fix sparse warnings (signedness)
  Input: evdev - fix some sparse warnings (signedness, shadowing)
  Input: drivers/joystick - fix various sparse warnings
  Input: force feedback - make sure effect is present before playing

8 files changed, 480 insertions, 29 deletions

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 271263443c37..82f563e24fdb 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -2,7 +2,7 @@
 # Joystick driver configuration
 #
 menuconfig INPUT_JOYSTICK
-	bool "Joysticks"
+	bool "Joysticks/Gamepads"
 	help
 	  If you have a joystick, 6dof controller, gamepad, steering wheel,
 	  weapon control system or something like that you can say Y here
@@ -196,7 +196,7 @@ config JOYSTICK_TWIDJOY
 config JOYSTICK_DB9
 	tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads"
 	depends on PARPORT
-	---help---
+	help
 	  Say Y here if you have a Sega Master System gamepad, Sega Genesis
 	  gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga,
 	  Commodore, Amstrad CPC joystick connected to your parallel port.
@@ -253,4 +253,18 @@ config JOYSTICK_JOYDUMP
 	  To compile this driver as a module, choose M here: the
 	  module will be called joydump.
 
+config JOYSTICK_XPAD
+	tristate "X-Box gamepad support"
+	select USB
+	help
+	  Say Y here if you want to use the X-Box pad with your computer.
+	  Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV)
+	  and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well.
+
+	  For information about how to connect the X-Box pad to USB, see
+	  <file:Documentation/input/xpad.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xpad.
+
 endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 5231f6ff75b8..e855abb0cc51 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_JOYSTICK_TMDC)		+= tmdc.o
 obj-$(CONFIG_JOYSTICK_TURBOGRAFX)	+= turbografx.o
 obj-$(CONFIG_JOYSTICK_TWIDJOY)		+= twidjoy.o
 obj-$(CONFIG_JOYSTICK_WARRIOR)		+= warrior.o
+obj-$(CONFIG_JOYSTICK_XPAD)		+= xpad.o
 
 obj-$(CONFIG_JOYSTICK_IFORCE)		+= iforce/
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 1c1afb5d4684..bdd157c1ebf8 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -53,7 +53,7 @@ MODULE_LICENSE("GPL");
 #define ANALOG_PORTS		16
 
 static char *js[ANALOG_PORTS];
-static int js_nargs;
+static unsigned int js_nargs;
 static int analog_options[ANALOG_PORTS];
 module_param_array_named(map, js, charp, &js_nargs, 0);
 MODULE_PARM_DESC(map, "Describes analog joysticks type/capabilities");
diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c
index c27593bf9978..86ad1027e12a 100644
--- a/drivers/input/joystick/db9.c
+++ b/drivers/input/joystick/db9.c
@@ -46,17 +46,17 @@ MODULE_LICENSE("GPL");
 
 struct db9_config {
 	int args[2];
-	int nargs;
+	unsigned int nargs;
 };
 
 #define DB9_MAX_PORTS		3
-static struct db9_config db9[DB9_MAX_PORTS] __initdata;
+static struct db9_config db9_cfg[DB9_MAX_PORTS] __initdata;
 
-module_param_array_named(dev, db9[0].args, int, &db9[0].nargs, 0);
+module_param_array_named(dev, db9_cfg[0].args, int, &db9_cfg[0].nargs, 0);
 MODULE_PARM_DESC(dev, "Describes first attached device (<parport#>,<type>)");
-module_param_array_named(dev2, db9[1].args, int, &db9[0].nargs, 0);
+module_param_array_named(dev2, db9_cfg[1].args, int, &db9_cfg[0].nargs, 0);
 MODULE_PARM_DESC(dev2, "Describes second attached device (<parport#>,<type>)");
-module_param_array_named(dev3, db9[2].args, int, &db9[2].nargs, 0);
+module_param_array_named(dev3, db9_cfg[2].args, int, &db9_cfg[2].nargs, 0);
 MODULE_PARM_DESC(dev3, "Describes third attached device (<parport#>,<type>)");
 
 #define DB9_ARG_PARPORT		0
@@ -680,17 +680,17 @@ static int __init db9_init(void)
 	int err = 0;
 
 	for (i = 0; i < DB9_MAX_PORTS; i++) {
-		if (db9[i].nargs == 0 || db9[i].args[DB9_ARG_PARPORT] < 0)
+		if (db9_cfg[i].nargs == 0 || db9_cfg[i].args[DB9_ARG_PARPORT] < 0)
 			continue;
 
-		if (db9[i].nargs < 2) {
+		if (db9_cfg[i].nargs < 2) {
 			printk(KERN_ERR "db9.c: Device type must be specified.\n");
 			err = -EINVAL;
 			break;
 		}
 
-		db9_base[i] = db9_probe(db9[i].args[DB9_ARG_PARPORT],
-					db9[i].args[DB9_ARG_MODE]);
+		db9_base[i] = db9_probe(db9_cfg[i].args[DB9_ARG_PARPORT],
+					db9_cfg[i].args[DB9_ARG_MODE]);
 		if (IS_ERR(db9_base[i])) {
 			err = PTR_ERR(db9_base[i]);
 			break;
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index c71b58fe225d..1a452e0e5f25 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -48,16 +48,16 @@ MODULE_LICENSE("GPL");
 
 struct gc_config {
 	int args[GC_MAX_DEVICES + 1];
-	int nargs;
+	unsigned int nargs;
 };
 
-static struct gc_config gc[GC_MAX_PORTS] __initdata;
+static struct gc_config gc_cfg[GC_MAX_PORTS] __initdata;
 
-module_param_array_named(map, gc[0].args, int, &gc[0].nargs, 0);
+module_param_array_named(map, gc_cfg[0].args, int, &gc_cfg[0].nargs, 0);
 MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<pad1>,<pad2>,..<pad5>)");
-module_param_array_named(map2, gc[1].args, int, &gc[1].nargs, 0);
+module_param_array_named(map2, gc_cfg[1].args, int, &gc_cfg[1].nargs, 0);
 MODULE_PARM_DESC(map2, "Describes second set of devices");
-module_param_array_named(map3, gc[2].args, int, &gc[2].nargs, 0);
+module_param_array_named(map3, gc_cfg[2].args, int, &gc_cfg[2].nargs, 0);
 MODULE_PARM_DESC(map3, "Describes third set of devices");
 
 /* see also gs_psx_delay parameter in PSX support section */
@@ -810,16 +810,17 @@ static int __init gc_init(void)
 	int err = 0;
 
 	for (i = 0; i < GC_MAX_PORTS; i++) {
-		if (gc[i].nargs == 0 || gc[i].args[0] < 0)
+		if (gc_cfg[i].nargs == 0 || gc_cfg[i].args[0] < 0)
 			continue;
 
-		if (gc[i].nargs < 2) {
+		if (gc_cfg[i].nargs < 2) {
 			printk(KERN_ERR "gamecon.c: at least one device must be specified\n");
 			err = -EINVAL;
 			break;
 		}
 
-		gc_base[i] = gc_probe(gc[i].args[0], gc[i].args + 1, gc[i].nargs - 1);
+		gc_base[i] = gc_probe(gc_cfg[i].args[0],
+				      gc_cfg[i].args + 1, gc_cfg[i].nargs - 1);
 		if (IS_ERR(gc_base[i])) {
 			err = PTR_ERR(gc_base[i]);
 			break;
diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h
index dadcf4fb92ae..40a853ac21c7 100644
--- a/drivers/input/joystick/iforce/iforce.h
+++ b/drivers/input/joystick/iforce/iforce.h
@@ -124,7 +124,7 @@ struct iforce {
 	/* Buffer used for asynchronous sending of bytes to the device */
 	struct circ_buf xmit;
 	unsigned char xmit_data[XMIT_SIZE];
-	long xmit_flags[1];
+	unsigned long xmit_flags[1];
 
 					/* Force Feedback */
 	wait_queue_head_t wait;
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index 0f2c60823b0b..8381c6f14373 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -48,16 +48,16 @@ MODULE_LICENSE("GPL");
 
 struct tgfx_config {
 	int args[TGFX_MAX_DEVICES + 1];
-	int nargs;
+	unsigned int nargs;
 };
 
-static struct tgfx_config tgfx[TGFX_MAX_PORTS] __initdata;
+static struct tgfx_config tgfx_cfg[TGFX_MAX_PORTS] __initdata;
 
-module_param_array_named(map, tgfx[0].args, int, &tgfx[0].nargs, 0);
+module_param_array_named(map, tgfx_cfg[0].args, int, &tgfx_cfg[0].nargs, 0);
 MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<js1>,<js2>,..<js7>");
-module_param_array_named(map2, tgfx[1].args, int, &tgfx[1].nargs, 0);
+module_param_array_named(map2, tgfx_cfg[1].args, int, &tgfx_cfg[1].nargs, 0);
 MODULE_PARM_DESC(map2, "Describes second set of devices");
-module_param_array_named(map3, tgfx[2].args, int, &tgfx[2].nargs, 0);
+module_param_array_named(map3, tgfx_cfg[2].args, int, &tgfx_cfg[2].nargs, 0);
 MODULE_PARM_DESC(map3, "Describes third set of devices");
 
 #define TGFX_REFRESH_TIME	HZ/100	/* 10 ms */
@@ -283,16 +283,18 @@ static int __init tgfx_init(void)
 	int err = 0;
 
 	for (i = 0; i < TGFX_MAX_PORTS; i++) {
-		if (tgfx[i].nargs == 0 || tgfx[i].args[0] < 0)
+		if (tgfx_cfg[i].nargs == 0 || tgfx_cfg[i].args[0] < 0)
 			continue;
 
-		if (tgfx[i].nargs < 2) {
+		if (tgfx_cfg[i].nargs < 2) {
 			printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n");
 			err = -EINVAL;
 			break;
 		}
 
-		tgfx_base[i] = tgfx_probe(tgfx[i].args[0], tgfx[i].args + 1, tgfx[i].nargs - 1);
+		tgfx_base[i] = tgfx_probe(tgfx_cfg[i].args[0],
+					  tgfx_cfg[i].args + 1,
+					  tgfx_cfg[i].nargs - 1);
 		if (IS_ERR(tgfx_base[i])) {
 			err = PTR_ERR(tgfx_base[i]);
 			break;
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
new file mode 100644
index 000000000000..8c8cd95a6989
--- /dev/null
+++ b/drivers/input/joystick/xpad.c
@@ -0,0 +1,433 @@
+/*
+ * X-Box gamepad - v0.0.6
+ *
+ * Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de>
+ *               2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>,
+ *                    Steven Toth <steve@toth.demon.co.uk>,
+ *                    Franz Lehner <franz@caos.at>,
+ *                    Ivan Hawkes <blackhawk@ivanhawkes.com>
+ *               2005 Dominic Cerquetti <binary1230@yahoo.com>
+ *               2006 Adam Buchbinder <adam.buchbinder@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * This driver is based on:
+ *  - information from     http://euc.jp/periphs/xbox-controller.ja.html
+ *  - the iForce driver    drivers/char/joystick/iforce.c
+ *  - the skeleton-driver  drivers/usb/usb-skeleton.c
+ *
+ * Thanks to:
+ *  - ITO Takayuki for providing essential xpad information on his website
+ *  - Vojtech Pavlik     - iforce driver / input subsystem
+ *  - Greg Kroah-Hartman - usb-skeleton driver
+ *  - XBOX Linux project - extra USB id's
+ *
+ * TODO:
+ *  - fine tune axes (especially trigger axes)
+ *  - fix "analog" buttons (reported as digital now)
+ *  - get rumble working
+ *  - need USB IDs for other dance pads
+ *
+ * History:
+ *
+ * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller"
+ *
+ * 2002-07-02 - 0.0.2 : basic working version
+ *  - all axes and 9 of the 10 buttons work (german InterAct device)
+ *  - the black button does not work
+ *
+ * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik
+ *  - indentation fixes
+ *  - usb + input init sequence fixes
+ *
+ * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3
+ *  - verified the lack of HID and report descriptors
+ *  - verified that ALL buttons WORK
+ *  - fixed d-pad to axes mapping
+ *
+ * 2002-07-17 - 0.0.5 : simplified d-pad handling
+ *
+ * 2004-10-02 - 0.0.6 : DDR pad support
+ *  - borrowed from the XBOX linux kernel
+ *  - USB id's for commonly used dance pads are present
+ *  - dance pads will map D-PAD to buttons, not axes
+ *  - pass the module paramater 'dpad_to_buttons' to force
+ *    the D-PAD to map to buttons if your pad is not detected
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/usb/input.h>
+
+#define DRIVER_VERSION "v0.0.6"
+#define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
+#define DRIVER_DESC "X-Box pad driver"
+
+#define XPAD_PKT_LEN 32
+
+/* xbox d-pads should map to buttons, as is required for DDR pads
+   but we map them to axes when possible to simplify things */
+#define MAP_DPAD_TO_BUTTONS    0
+#define MAP_DPAD_TO_AXES       1
+#define MAP_DPAD_UNKNOWN       -1
+
+static int dpad_to_buttons;
+module_param(dpad_to_buttons, bool, S_IRUGO);
+MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
+
+static const struct xpad_device {
+	u16 idVendor;
+	u16 idProduct;
+	char *name;
+	u8 dpad_mapping;
+} xpad_device[] = {
+	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES },
+	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES },
+	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES },
+	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES },
+	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS },
+	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES },
+	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES },
+	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES },
+	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES },
+	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS },
+	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS },
+	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES },
+	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES },
+	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES},
+	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES },
+	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES },
+	{ 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES },
+	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES },
+	{ 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES },
+	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES },
+	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES },
+	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS },
+	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS },
+	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES },
+	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN }
+};
+
+static const signed short xpad_btn[] = {
+	BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z,	/* "analog" buttons */
+	BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR,	/* start/back/sticks */
+	-1						/* terminating entry */
+};
+
+/* only used if MAP_DPAD_TO_BUTTONS */
+static const signed short xpad_btn_pad[] = {
+	BTN_LEFT, BTN_RIGHT,		/* d-pad left, right */
+	BTN_0, BTN_1,			/* d-pad up, down (XXX names??) */
+	-1				/* terminating entry */
+};
+
+static const signed short xpad_abs[] = {
+	ABS_X, ABS_Y,		/* left stick */
+	ABS_RX, ABS_RY,		/* right stick */
+	ABS_Z, ABS_RZ,		/* triggers left/right */
+	-1			/* terminating entry */
+};
+
+/* only used if MAP_DPAD_TO_AXES */
+static const signed short xpad_abs_pad[] = {
+	ABS_HAT0X, ABS_HAT0Y,	/* d-pad axes */
+	-1			/* terminating entry */
+};
+
+static struct usb_device_id xpad_table [] = {
+	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
+	{ }
+};
+
+MODULE_DEVICE_TABLE (usb, xpad_table);
+
+struct usb_xpad {
+	struct input_dev *dev;		/* input device interface */
+	struct usb_device *udev;	/* usb device */
+
+	struct urb *irq_in;		/* urb for interrupt in report */
+	unsigned char *idata;		/* input data */
+	dma_addr_t idata_dma;
+
+	char phys[65];			/* physical device path */
+
+	int dpad_mapping;		/* map d-pad to buttons or to axes */
+};
+
+/*
+ *	xpad_process_packet
+ *
+ *	Completes a request by converting the data into events for the
+ *	input subsystem.
+ *
+ *	The used report descriptor was taken from ITO Takayukis website:
+ *	 http://euc.jp/periphs/xbox-controller.ja.html
+ */
+
+static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
+{
+	struct input_dev *dev = xpad->dev;
+
+	/* left stick */
+	input_report_abs(dev, ABS_X, (__s16) (((__s16)data[13] << 8) | data[12]));
+	input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[15] << 8) | data[14]));
+
+	/* right stick */
+	input_report_abs(dev, ABS_RX, (__s16) (((__s16)data[17] << 8) | data[16]));
+	input_report_abs(dev, ABS_RY, (__s16) (((__s16)data[19] << 8) | data[18]));
+
+	/* triggers left/right */
+	input_report_abs(dev, ABS_Z, data[10]);
+	input_report_abs(dev, ABS_RZ, data[11]);
+
+	/* digital pad */
+	if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
+		input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04));
+		input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01));
+	} else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ {
+		input_report_key(dev, BTN_LEFT,  data[2] & 0x04);
+		input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
+		input_report_key(dev, BTN_0,     data[2] & 0x01); // up
+		input_report_key(dev, BTN_1,     data[2] & 0x02); // down
+	}
+
+	/* start/back buttons and stick press left/right */
+	input_report_key(dev, BTN_START,  data[2] & 0x10);
+	input_report_key(dev, BTN_BACK,   data[2] & 0x20);
+	input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
+	input_report_key(dev, BTN_THUMBR, data[2] & 0x80);
+
+	/* "analog" buttons A, B, X, Y */
+	input_report_key(dev, BTN_A, data[4]);
+	input_report_key(dev, BTN_B, data[5]);
+	input_report_key(dev, BTN_X, data[6]);
+	input_report_key(dev, BTN_Y, data[7]);
+
+	/* "analog" buttons black, white */
+	input_report_key(dev, BTN_C, data[8]);
+	input_report_key(dev, BTN_Z, data[9]);
+
+	input_sync(dev);
+}
+
+static void xpad_irq_in(struct urb *urb)
+{
+	struct usb_xpad *xpad = urb->context;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	xpad_process_packet(xpad, 0, xpad->idata);
+
+exit:
+	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	if (retval)
+		err ("%s - usb_submit_urb failed with result %d",
+		     __FUNCTION__, retval);
+}
+
+static int xpad_open (struct input_dev *dev)
+{
+	struct usb_xpad *xpad = input_get_drvdata(dev);
+
+	xpad->irq_in->dev = xpad->udev;
+	if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void xpad_close (struct input_dev *dev)
+{
+	struct usb_xpad *xpad = input_get_drvdata(dev);
+
+	usb_kill_urb(xpad->irq_in);
+}
+
+static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
+{
+	set_bit(abs, input_dev->absbit);
+
+	switch (abs) {
+	case ABS_X:
+	case ABS_Y:
+	case ABS_RX:
+	case ABS_RY:	/* the two sticks */
+		input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128);
+		break;
+	case ABS_Z:
+	case ABS_RZ:	/* the triggers */
+		input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
+		break;
+	case ABS_HAT0X:
+	case ABS_HAT0Y:	/* the d-pad (only if MAP_DPAD_TO_AXES) */
+		input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
+		break;
+	}
+}
+
+static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev (intf);
+	struct usb_xpad *xpad;
+	struct input_dev *input_dev;
+	struct usb_endpoint_descriptor *ep_irq_in;
+	int i;
+	int error = -ENOMEM;
+
+	for (i = 0; xpad_device[i].idVendor; i++) {
+		if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
+		    (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
+			break;
+	}
+
+	xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!xpad || !input_dev)
+		goto fail1;
+
+	xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
+				       GFP_ATOMIC, &xpad->idata_dma);
+	if (!xpad->idata)
+		goto fail1;
+
+	xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
+	if (!xpad->irq_in)
+		goto fail2;
+
+	xpad->udev = udev;
+	xpad->dpad_mapping = xpad_device[i].dpad_mapping;
+	if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
+		xpad->dpad_mapping = dpad_to_buttons;
+	xpad->dev = input_dev;
+	usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+	strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
+
+	input_dev->name = xpad_device[i].name;
+	input_dev->phys = xpad->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, xpad);
+
+	input_dev->open = xpad_open;
+	input_dev->close = xpad_close;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+	/* set up buttons */
+	for (i = 0; xpad_btn[i] >= 0; i++)
+		set_bit(xpad_btn[i], input_dev->keybit);
+	if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
+		for (i = 0; xpad_btn_pad[i] >= 0; i++)
+			set_bit(xpad_btn_pad[i], input_dev->keybit);
+
+	/* set up axes */
+	for (i = 0; xpad_abs[i] >= 0; i++)
+		xpad_set_up_abs(input_dev, xpad_abs[i]);
+	if (xpad->dpad_mapping == MAP_DPAD_TO_AXES)
+		for (i = 0; xpad_abs_pad[i] >= 0; i++)
+		    xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+
+	ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
+	usb_fill_int_urb(xpad->irq_in, udev,
+			 usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
+			 xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
+			 xpad, ep_irq_in->bInterval);
+	xpad->irq_in->transfer_dma = xpad->idata_dma;
+	xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	error = input_register_device(xpad->dev);
+	if (error)
+		goto fail3;
+
+	usb_set_intfdata(intf, xpad);
+	return 0;
+
+ fail3:	usb_free_urb(xpad->irq_in);
+ fail2:	usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+ fail1:	input_free_device(input_dev);
+	kfree(xpad);
+	return error;
+
+}
+
+static void xpad_disconnect(struct usb_interface *intf)
+{
+	struct usb_xpad *xpad = usb_get_intfdata (intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (xpad) {
+		usb_kill_urb(xpad->irq_in);
+		input_unregister_device(xpad->dev);
+		usb_free_urb(xpad->irq_in);
+		usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN,
+				xpad->idata, xpad->idata_dma);
+		kfree(xpad);
+	}
+}
+
+static struct usb_driver xpad_driver = {
+	.name		= "xpad",
+	.probe		= xpad_probe,
+	.disconnect	= xpad_disconnect,
+	.id_table	= xpad_table,
+};
+
+static int __init usb_xpad_init(void)
+{
+	int result = usb_register(&xpad_driver);
+	if (result == 0)
+		info(DRIVER_DESC ":" DRIVER_VERSION);
+	return result;
+}
+
+static void __exit usb_xpad_exit(void)
+{
+	usb_deregister(&xpad_driver);
+}
+
+module_init(usb_xpad_init);
+module_exit(usb_xpad_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");