[media] dvb-usb: move it to drivers/media/usb/dvb-usb

As media/dvb will be removed, move it to a proper place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 66 deletions

diff --git a/drivers/media/dvb/dvb-usb/digitv.h b/drivers/media/dvb/dvb-usb/digitv.h
deleted file mode 100644
index 908c09f4966b..000000000000
--- a/drivers/media/dvb/dvb-usb/digitv.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _DVB_USB_DIGITV_H_
-#define _DVB_USB_DIGITV_H_
-
-#define DVB_USB_LOG_PREFIX "digitv"
-#include "dvb-usb.h"
-
-struct digitv_state {
-    int is_nxt6000;
-};
-
-/* protocol (from usblogging and the SDK:
- *
- * Always 7 bytes bulk message(s) for controlling
- *
- * First byte describes the command. Reads are 2 consecutive transfer (as always).
- *
- * General structure:
- *
- * write or first message of a read:
- * <cmdbyte> VV <len> B0 B1 B2 B3
- *
- * second message of a read
- * <cmdbyte> VV <len> R0 R1 R2 R3
- *
- * whereas 0 < len <= 4
- *
- * I2C address is stored somewhere inside the device.
- *
- * 0x01 read from EEPROM
- *  VV = offset; B* = 0; R* = value(s)
- *
- * 0x02 read register of the COFDM
- *  VV = register; B* = 0; R* = value(s)
- *
- * 0x05 write register of the COFDM
- *  VV = register; B* = value(s);
- *
- * 0x06 write to the tuner (only for NXT6000)
- *  VV = 0; B* = PLL data; len = 4;
- *
- * 0x03 read remote control
- *  VV = 0; B* = 0; len = 4; R* = key
- *
- * 0x07 write to the remote (don't know why one should this, resetting ?)
- *  VV = 0; B* = key; len = 4;
- *
- * 0x08 write remote type
- *  VV = 0; B[0] = 0x01, len = 4
- *
- * 0x09 write device init
- *  TODO
- */
-#define USB_READ_EEPROM         1
-
-#define USB_READ_COFDM          2
-#define USB_WRITE_COFDM         5
-
-#define USB_WRITE_TUNER         6
-
-#define USB_READ_REMOTE         3
-#define USB_WRITE_REMOTE        7
-#define USB_WRITE_REMOTE_TYPE   8
-
-#define USB_DEV_INIT            9
-
-#endif