summaryrefslogtreecommitdiff
path: root/drivers/media/pci/ttpci/budget-ci.c
diff options
context:
space:
mode:
authorHans Verkuil <hverkuil-cisco@xs4all.nl>2022-08-11 11:17:48 +0200
committerMauro Carvalho Chehab <mchehab@kernel.org>2022-08-29 16:46:38 +0200
commite33fdb5a02490059e2f48ced2c038c8a46c6476d (patch)
tree4af388ba1670dcf8db0422795e318ac151480630 /drivers/media/pci/ttpci/budget-ci.c
parent6971757bdcccdd420583b0ed52361ebdafed2738 (diff)
downloadlinux-next-e33fdb5a02490059e2f48ced2c038c8a46c6476d.tar.gz
media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci
Deprecate the hexium_gemini, hexium_orion, mxb and ttpci saa7146-based drivers: these drivers do not use the vb2 framework for video streaming, instead it uses the old videobuf framework. We want to get rid of these old drivers, so deprecated these for future removal. [hverkuil: update MAINTAINERS file] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Diffstat (limited to 'drivers/media/pci/ttpci/budget-ci.c')
-rw-r--r--drivers/media/pci/ttpci/budget-ci.c1574
1 files changed, 0 insertions, 1574 deletions
diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c
deleted file mode 100644
index d59d18647371..000000000000
--- a/drivers/media/pci/ttpci/budget-ci.c
+++ /dev/null
@@ -1,1574 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * budget-ci.c: driver for the SAA7146 based Budget DVB cards
- *
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
- *
- * msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM>
- * partially based on the Siemens DVB driver by Ralph+Marcus Metzler
- *
- * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net>
- *
- * the project's page is at https://linuxtv.org
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <media/rc-core.h>
-
-#include "budget.h"
-
-#include <media/dvb_ca_en50221.h>
-#include "stv0299.h"
-#include "stv0297.h"
-#include "tda1004x.h"
-#include "stb0899_drv.h"
-#include "stb0899_reg.h"
-#include "stb0899_cfg.h"
-#include "stb6100.h"
-#include "stb6100_cfg.h"
-#include "lnbp21.h"
-#include "bsbe1.h"
-#include "bsru6.h"
-#include "tda1002x.h"
-#include "tda827x.h"
-#include "bsbe1-d01a.h"
-
-#define MODULE_NAME "budget_ci"
-
-/*
- * Regarding DEBIADDR_IR:
- * Some CI modules hang if random addresses are read.
- * Using address 0x4000 for the IR read means that we
- * use the same address as for CI version, which should
- * be a safe default.
- */
-#define DEBIADDR_IR 0x4000
-#define DEBIADDR_CICONTROL 0x0000
-#define DEBIADDR_CIVERSION 0x4000
-#define DEBIADDR_IO 0x1000
-#define DEBIADDR_ATTR 0x3000
-
-#define CICONTROL_RESET 0x01
-#define CICONTROL_ENABLETS 0x02
-#define CICONTROL_CAMDETECT 0x08
-
-#define DEBICICTL 0x00420000
-#define DEBICICAM 0x02420000
-
-#define SLOTSTATUS_NONE 1
-#define SLOTSTATUS_PRESENT 2
-#define SLOTSTATUS_RESET 4
-#define SLOTSTATUS_READY 8
-#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
-
-/* RC5 device wildcard */
-#define IR_DEVICE_ANY 255
-
-static int rc5_device = -1;
-module_param(rc5_device, int, 0644);
-MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
-
-static int ir_debug;
-module_param(ir_debug, int, 0644);
-MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-struct budget_ci_ir {
- struct rc_dev *dev;
- struct tasklet_struct msp430_irq_tasklet;
- char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
- char phys[32];
- int rc5_device;
- u32 ir_key;
- bool have_command;
- bool full_rc5; /* Outputs a full RC5 code */
-};
-
-struct budget_ci {
- struct budget budget;
- struct tasklet_struct ciintf_irq_tasklet;
- int slot_status;
- int ci_irq;
- struct dvb_ca_en50221 ca;
- struct budget_ci_ir ir;
- u8 tuner_pll_address; /* used for philips_tdm1316l configs */
-};
-
-static void msp430_ir_interrupt(struct tasklet_struct *t)
-{
- struct budget_ci_ir *ir = from_tasklet(ir, t, msp430_irq_tasklet);
- struct budget_ci *budget_ci = container_of(ir, typeof(*budget_ci), ir);
- struct rc_dev *dev = budget_ci->ir.dev;
- u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
-
- /*
- * The msp430 chip can generate two different bytes, command and device
- *
- * type1: X1CCCCCC, C = command bits (0 - 63)
- * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
- *
- * Each signal from the remote control can generate one or more command
- * bytes and one or more device bytes. For the repeated bytes, the
- * highest bit (X) is set. The first command byte is always generated
- * before the first device byte. Other than that, no specific order
- * seems to apply. To make life interesting, bytes can also be lost.
- *
- * Only when we have a command and device byte, a keypress is
- * generated.
- */
-
- if (ir_debug)
- printk("budget_ci: received byte 0x%02x\n", command);
-
- /* Remove repeat bit, we use every command */
- command = command & 0x7f;
-
- /* Is this a RC5 command byte? */
- if (command & 0x40) {
- budget_ci->ir.have_command = true;
- budget_ci->ir.ir_key = command & 0x3f;
- return;
- }
-
- /* It's a RC5 device byte */
- if (!budget_ci->ir.have_command)
- return;
- budget_ci->ir.have_command = false;
-
- if (budget_ci->ir.rc5_device != IR_DEVICE_ANY &&
- budget_ci->ir.rc5_device != (command & 0x1f))
- return;
-
- if (budget_ci->ir.full_rc5) {
- rc_keydown(dev, RC_PROTO_RC5,
- RC_SCANCODE_RC5(budget_ci->ir.rc5_device, budget_ci->ir.ir_key),
- !!(command & 0x20));
- return;
- }
-
- /* FIXME: We should generate complete scancodes for all devices */
- rc_keydown(dev, RC_PROTO_UNKNOWN, budget_ci->ir.ir_key,
- !!(command & 0x20));
-}
-
-static int msp430_ir_init(struct budget_ci *budget_ci)
-{
- struct saa7146_dev *saa = budget_ci->budget.dev;
- struct rc_dev *dev;
- int error;
-
- dev = rc_allocate_device(RC_DRIVER_SCANCODE);
- if (!dev) {
- printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
- return -ENOMEM;
- }
-
- snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name),
- "Budget-CI dvb ir receiver %s", saa->name);
- snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
- "pci-%s/ir0", pci_name(saa->pci));
-
- dev->driver_name = MODULE_NAME;
- dev->device_name = budget_ci->ir.name;
- dev->input_phys = budget_ci->ir.phys;
- dev->input_id.bustype = BUS_PCI;
- dev->input_id.version = 1;
- if (saa->pci->subsystem_vendor) {
- dev->input_id.vendor = saa->pci->subsystem_vendor;
- dev->input_id.product = saa->pci->subsystem_device;
- } else {
- dev->input_id.vendor = saa->pci->vendor;
- dev->input_id.product = saa->pci->device;
- }
- dev->dev.parent = &saa->pci->dev;
-
- if (rc5_device < 0)
- budget_ci->ir.rc5_device = IR_DEVICE_ANY;
- else
- budget_ci->ir.rc5_device = rc5_device;
-
- /* Select keymap and address */
- switch (budget_ci->budget.dev->pci->subsystem_device) {
- case 0x100c:
- case 0x100f:
- case 0x1011:
- case 0x1012:
- /* The hauppauge keymap is a superset of these remotes */
- dev->map_name = RC_MAP_HAUPPAUGE;
- budget_ci->ir.full_rc5 = true;
-
- if (rc5_device < 0)
- budget_ci->ir.rc5_device = 0x1f;
- break;
- case 0x1010:
- case 0x1017:
- case 0x1019:
- case 0x101a:
- case 0x101b:
- /* for the Technotrend 1500 bundled remote */
- dev->map_name = RC_MAP_TT_1500;
- break;
- default:
- /* unknown remote */
- dev->map_name = RC_MAP_BUDGET_CI_OLD;
- break;
- }
- if (!budget_ci->ir.full_rc5)
- dev->scancode_mask = 0xff;
-
- error = rc_register_device(dev);
- if (error) {
- printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
- rc_free_device(dev);
- return error;
- }
-
- budget_ci->ir.dev = dev;
-
- tasklet_setup(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt);
-
- SAA7146_IER_ENABLE(saa, MASK_06);
- saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
-
- return 0;
-}
-
-static void msp430_ir_deinit(struct budget_ci *budget_ci)
-{
- struct saa7146_dev *saa = budget_ci->budget.dev;
-
- SAA7146_IER_DISABLE(saa, MASK_06);
- saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
- tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
-
- rc_unregister_device(budget_ci->ir.dev);
-}
-
-static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-
- if (slot != 0)
- return -EINVAL;
-
- return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
- DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0);
-}
-
-static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-
- if (slot != 0)
- return -EINVAL;
-
- return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
- DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0);
-}
-
-static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-
- if (slot != 0)
- return -EINVAL;
-
- return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
- DEBIADDR_IO | (address & 3), 1, 1, 0);
-}
-
-static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
-
- if (slot != 0)
- return -EINVAL;
-
- return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
- DEBIADDR_IO | (address & 3), 1, value, 1, 0);
-}
-
-static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
- struct saa7146_dev *saa = budget_ci->budget.dev;
-
- if (slot != 0)
- return -EINVAL;
-
- if (budget_ci->ci_irq) {
- // trigger on RISING edge during reset so we know when READY is re-asserted
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
- }
- budget_ci->slot_status = SLOTSTATUS_RESET;
- ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
- msleep(1);
- ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
- CICONTROL_RESET, 1, 0);
-
- saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
- ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
- return 0;
-}
-
-static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
- struct saa7146_dev *saa = budget_ci->budget.dev;
-
- if (slot != 0)
- return -EINVAL;
-
- saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
- ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
- return 0;
-}
-
-static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
- struct saa7146_dev *saa = budget_ci->budget.dev;
- int tmp;
-
- if (slot != 0)
- return -EINVAL;
-
- saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
-
- tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
- ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
- tmp | CICONTROL_ENABLETS, 1, 0);
-
- ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
- return 0;
-}
-
-static void ciintf_interrupt(struct tasklet_struct *t)
-{
- struct budget_ci *budget_ci = from_tasklet(budget_ci, t,
- ciintf_irq_tasklet);
- struct saa7146_dev *saa = budget_ci->budget.dev;
- unsigned int flags;
-
- // ensure we don't get spurious IRQs during initialisation
- if (!budget_ci->budget.ci_present)
- return;
-
- // read the CAM status
- flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
- if (flags & CICONTROL_CAMDETECT) {
-
- // GPIO should be set to trigger on falling edge if a CAM is present
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
-
- if (budget_ci->slot_status & SLOTSTATUS_NONE) {
- // CAM insertion IRQ
- budget_ci->slot_status = SLOTSTATUS_PRESENT;
- dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
- DVB_CA_EN50221_CAMCHANGE_INSERTED);
-
- } else if (budget_ci->slot_status & SLOTSTATUS_RESET) {
- // CAM ready (reset completed)
- budget_ci->slot_status = SLOTSTATUS_READY;
- dvb_ca_en50221_camready_irq(&budget_ci->ca, 0);
-
- } else if (budget_ci->slot_status & SLOTSTATUS_READY) {
- // FR/DA IRQ
- dvb_ca_en50221_frda_irq(&budget_ci->ca, 0);
- }
- } else {
-
- // trigger on rising edge if a CAM is not present - when a CAM is inserted, we
- // only want to get the IRQ when it sets READY. If we trigger on the falling edge,
- // the CAM might not actually be ready yet.
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
-
- // generate a CAM removal IRQ if we haven't already
- if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) {
- // CAM removal IRQ
- budget_ci->slot_status = SLOTSTATUS_NONE;
- dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
- DVB_CA_EN50221_CAMCHANGE_REMOVED);
- }
- }
-}
-
-static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
- unsigned int flags;
-
- // ensure we don't get spurious IRQs during initialisation
- if (!budget_ci->budget.ci_present)
- return -EINVAL;
-
- // read the CAM status
- flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
- if (flags & CICONTROL_CAMDETECT) {
- // mark it as present if it wasn't before
- if (budget_ci->slot_status & SLOTSTATUS_NONE) {
- budget_ci->slot_status = SLOTSTATUS_PRESENT;
- }
-
- // during a RESET, we check if we can read from IO memory to see when CAM is ready
- if (budget_ci->slot_status & SLOTSTATUS_RESET) {
- if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
- budget_ci->slot_status = SLOTSTATUS_READY;
- }
- }
- } else {
- budget_ci->slot_status = SLOTSTATUS_NONE;
- }
-
- if (budget_ci->slot_status != SLOTSTATUS_NONE) {
- if (budget_ci->slot_status & SLOTSTATUS_READY) {
- return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
- }
- return DVB_CA_EN50221_POLL_CAM_PRESENT;
- }
-
- return 0;
-}
-
-static int ciintf_init(struct budget_ci *budget_ci)
-{
- struct saa7146_dev *saa = budget_ci->budget.dev;
- int flags;
- int result;
- int ci_version;
- int ca_flags;
-
- memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
-
- // enable DEBI pins
- saa7146_write(saa, MC1, MASK_27 | MASK_11);
-
- // test if it is there
- ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
- if ((ci_version & 0xa0) != 0xa0) {
- result = -ENODEV;
- goto error;
- }
-
- // determine whether a CAM is present or not
- flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
- budget_ci->slot_status = SLOTSTATUS_NONE;
- if (flags & CICONTROL_CAMDETECT)
- budget_ci->slot_status = SLOTSTATUS_PRESENT;
-
- // version 0xa2 of the CI firmware doesn't generate interrupts
- if (ci_version == 0xa2) {
- ca_flags = 0;
- budget_ci->ci_irq = 0;
- } else {
- ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
- DVB_CA_EN50221_FLAG_IRQ_FR |
- DVB_CA_EN50221_FLAG_IRQ_DA;
- budget_ci->ci_irq = 1;
- }
-
- // register CI interface
- budget_ci->ca.owner = THIS_MODULE;
- budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
- budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem;
- budget_ci->ca.read_cam_control = ciintf_read_cam_control;
- budget_ci->ca.write_cam_control = ciintf_write_cam_control;
- budget_ci->ca.slot_reset = ciintf_slot_reset;
- budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
- budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
- budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
- budget_ci->ca.data = budget_ci;
- if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
- &budget_ci->ca,
- ca_flags, 1)) != 0) {
- printk("budget_ci: CI interface detected, but initialisation failed.\n");
- goto error;
- }
-
- // Setup CI slot IRQ
- if (budget_ci->ci_irq) {
- tasklet_setup(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt);
- if (budget_ci->slot_status != SLOTSTATUS_NONE) {
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
- } else {
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
- }
- SAA7146_IER_ENABLE(saa, MASK_03);
- }
-
- // enable interface
- ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
- CICONTROL_RESET, 1, 0);
-
- // success!
- printk("budget_ci: CI interface initialised\n");
- budget_ci->budget.ci_present = 1;
-
- // forge a fake CI IRQ so the CAM state is setup correctly
- if (budget_ci->ci_irq) {
- flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
- if (budget_ci->slot_status != SLOTSTATUS_NONE)
- flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
- dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
- }
-
- return 0;
-
-error:
- saa7146_write(saa, MC1, MASK_27);
- return result;
-}
-
-static void ciintf_deinit(struct budget_ci *budget_ci)
-{
- struct saa7146_dev *saa = budget_ci->budget.dev;
-
- // disable CI interrupts
- if (budget_ci->ci_irq) {
- SAA7146_IER_DISABLE(saa, MASK_03);
- saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
- tasklet_kill(&budget_ci->ciintf_irq_tasklet);
- }
-
- // reset interface
- ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
- msleep(1);
- ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
- CICONTROL_RESET, 1, 0);
-
- // disable TS data stream to CI interface
- saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
-
- // release the CA device
- dvb_ca_en50221_release(&budget_ci->ca);
-
- // disable DEBI pins
- saa7146_write(saa, MC1, MASK_27);
-}
-
-static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
-
- dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci);
-
- if (*isr & MASK_06)
- tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet);
-
- if (*isr & MASK_10)
- ttpci_budget_irq10_handler(dev, isr);
-
- if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
- tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
-}
-
-static u8 philips_su1278_tt_inittab[] = {
- 0x01, 0x0f,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x5b,
- 0x05, 0x85,
- 0x06, 0x02,
- 0x07, 0x00,
- 0x08, 0x02,
- 0x09, 0x00,
- 0x0C, 0x01,
- 0x0D, 0x81,
- 0x0E, 0x44,
- 0x0f, 0x14,
- 0x10, 0x3c,
- 0x11, 0x84,
- 0x12, 0xda,
- 0x13, 0x97,
- 0x14, 0x95,
- 0x15, 0xc9,
- 0x16, 0x19,
- 0x17, 0x8c,
- 0x18, 0x59,
- 0x19, 0xf8,
- 0x1a, 0xfe,
- 0x1c, 0x7f,
- 0x1d, 0x00,
- 0x1e, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00,
- 0x29, 0x28,
- 0x2a, 0x14,
- 0x2b, 0x0f,
- 0x2c, 0x09,
- 0x2d, 0x09,
- 0x31, 0x1f,
- 0x32, 0x19,
- 0x33, 0xfc,
- 0x34, 0x93,
- 0xff, 0xff
-};
-
-static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
-{
- stv0299_writereg(fe, 0x0e, 0x44);
- if (srate >= 10000000) {
- stv0299_writereg(fe, 0x13, 0x97);
- stv0299_writereg(fe, 0x14, 0x95);
- stv0299_writereg(fe, 0x15, 0xc9);
- stv0299_writereg(fe, 0x17, 0x8c);
- stv0299_writereg(fe, 0x1a, 0xfe);
- stv0299_writereg(fe, 0x1c, 0x7f);
- stv0299_writereg(fe, 0x2d, 0x09);
- } else {
- stv0299_writereg(fe, 0x13, 0x99);
- stv0299_writereg(fe, 0x14, 0x8d);
- stv0299_writereg(fe, 0x15, 0xce);
- stv0299_writereg(fe, 0x17, 0x43);
- stv0299_writereg(fe, 0x1a, 0x1d);
- stv0299_writereg(fe, 0x1c, 0x12);
- stv0299_writereg(fe, 0x2d, 0x05);
- }
- stv0299_writereg(fe, 0x0e, 0x23);
- stv0299_writereg(fe, 0x0f, 0x94);
- stv0299_writereg(fe, 0x10, 0x39);
- stv0299_writereg(fe, 0x15, 0xc9);
-
- stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
-
- return 0;
-}
-
-static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
- u32 div;
- u8 buf[4];
- struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
-
- if ((p->frequency < 950000) || (p->frequency > 2150000))
- return -EINVAL;
-
- div = (p->frequency + (500 - 1)) / 500; /* round correctly */
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = div & 0xff;
- buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2;
- buf[3] = 0x20;
-
- if (p->symbol_rate < 4000000)
- buf[3] |= 1;
-
- if (p->frequency < 1250000)
- buf[3] |= 0;
- else if (p->frequency < 1550000)
- buf[3] |= 0x40;
- else if (p->frequency < 2050000)
- buf[3] |= 0x80;
- else if (p->frequency < 2150000)
- buf[3] |= 0xC0;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
-static const struct stv0299_config philips_su1278_tt_config = {
-
- .demod_address = 0x68,
- .inittab = philips_su1278_tt_inittab,
- .mclk = 64000000UL,
- .invert = 0,
- .skip_reinit = 1,
- .lock_output = STV0299_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP1,
- .min_delay_ms = 50,
- .set_symbol_rate = philips_su1278_tt_set_symbol_rate,
-};
-
-
-
-static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
- static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab };
- static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 };
- struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len =
- sizeof(td1316_init) };
-
- // setup PLL configuration
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
- msleep(1);
-
- // disable the mc44BC374c (do not check for errors)
- tuner_msg.addr = 0x65;
- tuner_msg.buf = disable_mc44BC374c;
- tuner_msg.len = sizeof(disable_mc44BC374c);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) {
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1);
- }
-
- return 0;
-}
-
-static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
- u8 tuner_buf[4];
- struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) };
- int tuner_frequency = 0;
- u8 band, cp, filter;
-
- // determine charge pump
- tuner_frequency = p->frequency + 36130000;
- if (tuner_frequency < 87000000)
- return -EINVAL;
- else if (tuner_frequency < 130000000)
- cp = 3;
- else if (tuner_frequency < 160000000)
- cp = 5;
- else if (tuner_frequency < 200000000)
- cp = 6;
- else if (tuner_frequency < 290000000)
- cp = 3;
- else if (tuner_frequency < 420000000)
- cp = 5;
- else if (tuner_frequency < 480000000)
- cp = 6;
- else if (tuner_frequency < 620000000)
- cp = 3;
- else if (tuner_frequency < 830000000)
- cp = 5;
- else if (tuner_frequency < 895000000)
- cp = 7;
- else
- return -EINVAL;
-
- // determine band
- if (p->frequency < 49000000)
- return -EINVAL;
- else if (p->frequency < 159000000)
- band = 1;
- else if (p->frequency < 444000000)
- band = 2;
- else if (p->frequency < 861000000)
- band = 4;
- else
- return -EINVAL;
-
- // setup PLL filter and TDA9889
- switch (p->bandwidth_hz) {
- case 6000000:
- tda1004x_writereg(fe, 0x0C, 0x14);
- filter = 0;
- break;
-
- case 7000000:
- tda1004x_writereg(fe, 0x0C, 0x80);
- filter = 0;
- break;
-
- case 8000000:
- tda1004x_writereg(fe, 0x0C, 0x14);
- filter = 1;
- break;
-
- default:
- return -EINVAL;
- }
-
- // calculate divisor
- // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6)
- tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000;
-
- // setup tuner buffer
- tuner_buf[0] = tuner_frequency >> 8;
- tuner_buf[1] = tuner_frequency & 0xff;
- tuner_buf[2] = 0xca;
- tuner_buf[3] = (cp << 5) | (filter << 3) | band;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
-
- msleep(1);
- return 0;
-}
-
-static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe,
- const struct firmware **fw, char *name)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
-
- return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev);
-}
-
-static struct tda1004x_config philips_tdm1316l_config = {
-
- .demod_address = 0x8,
- .invert = 0,
- .invert_oclk = 0,
- .xtal_freq = TDA10046_XTAL_4M,
- .agc_config = TDA10046_AGC_DEFAULT,
- .if_freq = TDA10046_FREQ_3617,
- .request_firmware = philips_tdm1316l_request_firmware,
-};
-
-static struct tda1004x_config philips_tdm1316l_config_invert = {
-
- .demod_address = 0x8,
- .invert = 1,
- .invert_oclk = 0,
- .xtal_freq = TDA10046_XTAL_4M,
- .agc_config = TDA10046_AGC_DEFAULT,
- .if_freq = TDA10046_FREQ_3617,
- .request_firmware = philips_tdm1316l_request_firmware,
-};
-
-static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
- u8 tuner_buf[5];
- struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,
- .flags = 0,
- .buf = tuner_buf,
- .len = sizeof(tuner_buf) };
- int tuner_frequency = 0;
- u8 band, cp, filter;
-
- // determine charge pump
- tuner_frequency = p->frequency + 36125000;
- if (tuner_frequency < 87000000)
- return -EINVAL;
- else if (tuner_frequency < 130000000) {
- cp = 3;
- band = 1;
- } else if (tuner_frequency < 160000000) {
- cp = 5;
- band = 1;
- } else if (tuner_frequency < 200000000) {
- cp = 6;
- band = 1;
- } else if (tuner_frequency < 290000000) {
- cp = 3;
- band = 2;
- } else if (tuner_frequency < 420000000) {
- cp = 5;
- band = 2;
- } else if (tuner_frequency < 480000000) {
- cp = 6;
- band = 2;
- } else if (tuner_frequency < 620000000) {
- cp = 3;
- band = 4;
- } else if (tuner_frequency < 830000000) {
- cp = 5;
- band = 4;
- } else if (tuner_frequency < 895000000) {
- cp = 7;
- band = 4;
- } else
- return -EINVAL;
-
- // assume PLL filter should always be 8MHz for the moment.
- filter = 1;
-
- // calculate divisor
- tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500;
-
- // setup tuner buffer
- tuner_buf[0] = tuner_frequency >> 8;
- tuner_buf[1] = tuner_frequency & 0xff;
- tuner_buf[2] = 0xc8;
- tuner_buf[3] = (cp << 5) | (filter << 3) | band;
- tuner_buf[4] = 0x80;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
-
- msleep(50);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
-
- msleep(1);
-
- return 0;
-}
-
-static u8 dvbc_philips_tdm1316l_inittab[] = {
- 0x80, 0x01,
- 0x80, 0x00,
- 0x81, 0x01,
- 0x81, 0x00,
- 0x00, 0x09,
- 0x01, 0x69,
- 0x03, 0x00,
- 0x04, 0x00,
- 0x07, 0x00,
- 0x08, 0x00,
- 0x20, 0x00,
- 0x21, 0x40,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x24, 0x40,
- 0x25, 0x88,
- 0x30, 0xff,
- 0x31, 0x00,
- 0x32, 0xff,
- 0x33, 0x00,
- 0x34, 0x50,
- 0x35, 0x7f,
- 0x36, 0x00,
- 0x37, 0x20,
- 0x38, 0x00,
- 0x40, 0x1c,
- 0x41, 0xff,
- 0x42, 0x29,
- 0x43, 0x20,
- 0x44, 0xff,
- 0x45, 0x00,
- 0x46, 0x00,
- 0x49, 0x04,
- 0x4a, 0x00,
- 0x4b, 0x7b,
- 0x52, 0x30,
- 0x55, 0xae,
- 0x56, 0x47,
- 0x57, 0xe1,
- 0x58, 0x3a,
- 0x5a, 0x1e,
- 0x5b, 0x34,
- 0x60, 0x00,
- 0x63, 0x00,
- 0x64, 0x00,
- 0x65, 0x00,
- 0x66, 0x00,
- 0x67, 0x00,
- 0x68, 0x00,
- 0x69, 0x00,
- 0x6a, 0x02,
- 0x6b, 0x00,
- 0x70, 0xff,
- 0x71, 0x00,
- 0x72, 0x00,
- 0x73, 0x00,
- 0x74, 0x0c,
- 0x80, 0x00,
- 0x81, 0x00,
- 0x82, 0x00,
- 0x83, 0x00,
- 0x84, 0x04,
- 0x85, 0x80,
- 0x86, 0x24,
- 0x87, 0x78,
- 0x88, 0x10,
- 0x89, 0x00,
- 0x90, 0x01,
- 0x91, 0x01,
- 0xa0, 0x04,
- 0xa1, 0x00,
- 0xa2, 0x00,
- 0xb0, 0x91,
- 0xb1, 0x0b,
- 0xc0, 0x53,
- 0xc1, 0x70,
- 0xc2, 0x12,
- 0xd0, 0x00,
- 0xd1, 0x00,
- 0xd2, 0x00,
- 0xd3, 0x00,
- 0xd4, 0x00,
- 0xd5, 0x00,
- 0xde, 0x00,
- 0xdf, 0x00,
- 0x61, 0x38,
- 0x62, 0x0a,
- 0x53, 0x13,
- 0x59, 0x08,
- 0xff, 0xff,
-};
-
-static struct stv0297_config dvbc_philips_tdm1316l_config = {
- .demod_address = 0x1c,
- .inittab = dvbc_philips_tdm1316l_inittab,
- .invert = 0,
- .stop_during_read = 1,
-};
-
-static struct tda10023_config tda10023_config = {
- .demod_address = 0xc,
- .invert = 0,
- .xtal = 16000000,
- .pll_m = 11,
- .pll_p = 3,
- .pll_n = 1,
- .deltaf = 0xa511,
-};
-
-static struct tda827x_config tda827x_config = {
- .config = 0,
-};
-
-/* TT S2-3200 DVB-S (STB0899) Inittab */
-static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = {
-
- { STB0899_DEV_ID , 0x81 },
- { STB0899_DISCNTRL1 , 0x32 },
- { STB0899_DISCNTRL2 , 0x80 },
- { STB0899_DISRX_ST0 , 0x04 },
- { STB0899_DISRX_ST1 , 0x00 },
- { STB0899_DISPARITY , 0x00 },
- { STB0899_DISSTATUS , 0x20 },
- { STB0899_DISF22 , 0x8c },
- { STB0899_DISF22RX , 0x9a },
- { STB0899_SYSREG , 0x0b },
- { STB0899_ACRPRESC , 0x11 },
- { STB0899_ACRDIV1 , 0x0a },
- { STB0899_ACRDIV2 , 0x05 },
- { STB0899_DACR1 , 0x00 },
- { STB0899_DACR2 , 0x00 },
- { STB0899_OUTCFG , 0x00 },
- { STB0899_MODECFG , 0x00 },
- { STB0899_IRQSTATUS_3 , 0x30 },
- { STB0899_IRQSTATUS_2 , 0x00 },
- { STB0899_IRQSTATUS_1 , 0x00 },
- { STB0899_IRQSTATUS_0 , 0x00 },
- { STB0899_IRQMSK_3 , 0xf3 },
- { STB0899_IRQMSK_2 , 0xfc },
- { STB0899_IRQMSK_1 , 0xff },
- { STB0899_IRQMSK_0 , 0xff },
- { STB0899_IRQCFG , 0x00 },
- { STB0899_I2CCFG , 0x88 },
- { STB0899_I2CRPT , 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */
- { STB0899_IOPVALUE5 , 0x00 },
- { STB0899_IOPVALUE4 , 0x20 },
- { STB0899_IOPVALUE3 , 0xc9 },
- { STB0899_IOPVALUE2 , 0x90 },
- { STB0899_IOPVALUE1 , 0x40 },
- { STB0899_IOPVALUE0 , 0x00 },
- { STB0899_GPIO00CFG , 0x82 },
- { STB0899_GPIO01CFG , 0x82 },
- { STB0899_GPIO02CFG , 0x82 },
- { STB0899_GPIO03CFG , 0x82 },
- { STB0899_GPIO04CFG , 0x82 },
- { STB0899_GPIO05CFG , 0x82 },
- { STB0899_GPIO06CFG , 0x82 },
- { STB0899_GPIO07CFG , 0x82 },
- { STB0899_GPIO08CFG , 0x82 },
- { STB0899_GPIO09CFG , 0x82 },
- { STB0899_GPIO10CFG , 0x82 },
- { STB0899_GPIO11CFG , 0x82 },
- { STB0899_GPIO12CFG , 0x82 },
- { STB0899_GPIO13CFG , 0x82 },
- { STB0899_GPIO14CFG , 0x82 },
- { STB0899_GPIO15CFG , 0x82 },
- { STB0899_GPIO16CFG , 0x82 },
- { STB0899_GPIO17CFG , 0x82 },
- { STB0899_GPIO18CFG , 0x82 },
- { STB0899_GPIO19CFG , 0x82 },
- { STB0899_GPIO20CFG , 0x82 },
- { STB0899_SDATCFG , 0xb8 },
- { STB0899_SCLTCFG , 0xba },
- { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */
- { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
- { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
- { STB0899_DIRCLKCFG , 0x82 },
- { STB0899_CLKOUT27CFG , 0x7e },
- { STB0899_STDBYCFG , 0x82 },
- { STB0899_CS0CFG , 0x82 },
- { STB0899_CS1CFG , 0x82 },
- { STB0899_DISEQCOCFG , 0x20 },
- { STB0899_GPIO32CFG , 0x82 },
- { STB0899_GPIO33CFG , 0x82 },
- { STB0899_GPIO34CFG , 0x82 },
- { STB0899_GPIO35CFG , 0x82 },
- { STB0899_GPIO36CFG , 0x82 },
- { STB0899_GPIO37CFG , 0x82 },
- { STB0899_GPIO38CFG , 0x82 },
- { STB0899_GPIO39CFG , 0x82 },
- { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
- { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
- { STB0899_FILTCTRL , 0x00 },
- { STB0899_SYSCTRL , 0x00 },
- { STB0899_STOPCLK1 , 0x20 },
- { STB0899_STOPCLK2 , 0x00 },
- { STB0899_INTBUFSTATUS , 0x00 },
- { STB0899_INTBUFCTRL , 0x0a },
- { 0xffff , 0xff },
-};
-
-static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = {
- { STB0899_DEMOD , 0x00 },
- { STB0899_RCOMPC , 0xc9 },
- { STB0899_AGC1CN , 0x41 },
- { STB0899_AGC1REF , 0x10 },
- { STB0899_RTC , 0x7a },
- { STB0899_TMGCFG , 0x4e },
- { STB0899_AGC2REF , 0x34 },
- { STB0899_TLSR , 0x84 },
- { STB0899_CFD , 0xc7 },
- { STB0899_ACLC , 0x87 },
- { STB0899_BCLC , 0x94 },
- { STB0899_EQON , 0x41 },
- { STB0899_LDT , 0xdd },
- { STB0899_LDT2 , 0xc9 },
- { STB0899_EQUALREF , 0xb4 },
- { STB0899_TMGRAMP , 0x10 },
- { STB0899_TMGTHD , 0x30 },
- { STB0899_IDCCOMP , 0xfb },
- { STB0899_QDCCOMP , 0x03 },
- { STB0899_POWERI , 0x3b },
- { STB0899_POWERQ , 0x3d },
- { STB0899_RCOMP , 0x81 },
- { STB0899_AGCIQIN , 0x80 },
- { STB0899_AGC2I1 , 0x04 },
- { STB0899_AGC2I2 , 0xf5 },
- { STB0899_TLIR , 0x25 },
- { STB0899_RTF , 0x80 },
- { STB0899_DSTATUS , 0x00 },
- { STB0899_LDI , 0xca },
- { STB0899_CFRM , 0xf1 },
- { STB0899_CFRL , 0xf3 },
- { STB0899_NIRM , 0x2a },
- { STB0899_NIRL , 0x05 },
- { STB0899_ISYMB , 0x17 },
- { STB0899_QSYMB , 0xfa },
- { STB0899_SFRH , 0x2f },
- { STB0899_SFRM , 0x68 },
- { STB0899_SFRL , 0x40 },
- { STB0899_SFRUPH , 0x2f },
- { STB0899_SFRUPM , 0x68 },
- { STB0899_SFRUPL , 0x40 },
- { STB0899_EQUAI1 , 0xfd },
- { STB0899_EQUAQ1 , 0x04 },
- { STB0899_EQUAI2 , 0x0f },
- { STB0899_EQUAQ2 , 0xff },
- { STB0899_EQUAI3 , 0xdf },
- { STB0899_EQUAQ3 , 0xfa },
- { STB0899_EQUAI4 , 0x37 },
- { STB0899_EQUAQ4 , 0x0d },
- { STB0899_EQUAI5 , 0xbd },
- { STB0899_EQUAQ5 , 0xf7 },
- { STB0899_DSTATUS2 , 0x00 },
- { STB0899_VSTATUS , 0x00 },
- { STB0899_VERROR , 0xff },
- { STB0899_IQSWAP , 0x2a },
- { STB0899_ECNT1M , 0x00 },
- { STB0899_ECNT1L , 0x00 },
- { STB0899_ECNT2M , 0x00 },
- { STB0899_ECNT2L , 0x00 },
- { STB0899_ECNT3M , 0x00 },
- { STB0899_ECNT3L , 0x00 },
- { STB0899_FECAUTO1 , 0x06 },
- { STB0899_FECM , 0x01 },
- { STB0899_VTH12 , 0xf0 },
- { STB0899_VTH23 , 0xa0 },
- { STB0899_VTH34 , 0x78 },
- { STB0899_VTH56 , 0x4e },
- { STB0899_VTH67 , 0x48 },
- { STB0899_VTH78 , 0x38 },
- { STB0899_PRVIT , 0xff },
- { STB0899_VITSYNC , 0x19 },
- { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
- { STB0899_TSULC , 0x42 },
- { STB0899_RSLLC , 0x40 },
- { STB0899_TSLPL , 0x12 },
- { STB0899_TSCFGH , 0x0c },
- { STB0899_TSCFGM , 0x00 },
- { STB0899_TSCFGL , 0x0c },
- { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */
- { STB0899_RSSYNCDEL , 0x00 },
- { STB0899_TSINHDELH , 0x02 },
- { STB0899_TSINHDELM , 0x00 },
- { STB0899_TSINHDELL , 0x00 },
- { STB0899_TSLLSTKM , 0x00 },
- { STB0899_TSLLSTKL , 0x00 },
- { STB0899_TSULSTKM , 0x00 },
- { STB0899_TSULSTKL , 0xab },
- { STB0899_PCKLENUL , 0x00 },
- { STB0899_PCKLENLL , 0xcc },
- { STB0899_RSPCKLEN , 0xcc },
- { STB0899_TSSTATUS , 0x80 },
- { STB0899_ERRCTRL1 , 0xb6 },
- { STB0899_ERRCTRL2 , 0x96 },
- { STB0899_ERRCTRL3 , 0x89 },
- { STB0899_DMONMSK1 , 0x27 },
- { STB0899_DMONMSK0 , 0x03 },
- { STB0899_DEMAPVIT , 0x5c },
- { STB0899_PLPARM , 0x1f },
- { STB0899_PDELCTRL , 0x48 },
- { STB0899_PDELCTRL2 , 0x00 },
- { STB0899_BBHCTRL1 , 0x00 },
- { STB0899_BBHCTRL2 , 0x00 },
- { STB0899_HYSTTHRESH , 0x77 },
- { STB0899_MATCSTM , 0x00 },
- { STB0899_MATCSTL , 0x00 },
- { STB0899_UPLCSTM , 0x00 },
- { STB0899_UPLCSTL , 0x00 },
- { STB0899_DFLCSTM , 0x00 },
- { STB0899_DFLCSTL , 0x00 },
- { STB0899_SYNCCST , 0x00 },
- { STB0899_SYNCDCSTM , 0x00 },
- { STB0899_SYNCDCSTL , 0x00 },
- { STB0899_ISI_ENTRY , 0x00 },
- { STB0899_ISI_BIT_EN , 0x00 },
- { STB0899_MATSTRM , 0x00 },
- { STB0899_MATSTRL , 0x00 },
- { STB0899_UPLSTRM , 0x00 },
- { STB0899_UPLSTRL , 0x00 },
- { STB0899_DFLSTRM , 0x00 },
- { STB0899_DFLSTRL , 0x00 },
- { STB0899_SYNCSTR , 0x00 },
- { STB0899_SYNCDSTRM , 0x00 },
- { STB0899_SYNCDSTRL , 0x00 },
- { STB0899_CFGPDELSTATUS1 , 0x10 },
- { STB0899_CFGPDELSTATUS2 , 0x00 },
- { STB0899_BBFERRORM , 0x00 },
- { STB0899_BBFERRORL , 0x00 },
- { STB0899_UPKTERRORM , 0x00 },
- { STB0899_UPKTERRORL , 0x00 },
- { 0xffff , 0xff },
-};
-
-static struct stb0899_config tt3200_config = {
- .init_dev = tt3200_stb0899_s1_init_1,
- .init_s2_demod = stb0899_s2_init_2,
- .init_s1_demod = tt3200_stb0899_s1_init_3,
- .init_s2_fec = stb0899_s2_init_4,
- .init_tst = stb0899_s1_init_5,
-
- .postproc = NULL,
-
- .demod_address = 0x68,
-
- .xtal_freq = 27000000,
- .inversion = IQ_SWAP_ON,
-
- .lo_clk = 76500000,
- .hi_clk = 99000000,
-
- .esno_ave = STB0899_DVBS2_ESNO_AVE,
- .esno_quant = STB0899_DVBS2_ESNO_QUANT,
- .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
- .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
- .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
- .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
- .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
- .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
- .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
-
- .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
- .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
- .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
- .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
-
- .tuner_get_frequency = stb6100_get_frequency,
- .tuner_set_frequency = stb6100_set_frequency,
- .tuner_set_bandwidth = stb6100_set_bandwidth,
- .tuner_get_bandwidth = stb6100_get_bandwidth,
- .tuner_set_rfsiggain = NULL
-};
-
-static struct stb6100_config tt3200_stb6100_config = {
- .tuner_address = 0x60,
- .refclock = 27000000,
-};
-
-static void frontend_init(struct budget_ci *budget_ci)
-{
- switch (budget_ci->budget.dev->pci->subsystem_device) {
- case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059))
- budget_ci->budget.dvb_frontend =
- dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap);
- if (budget_ci->budget.dvb_frontend) {
- budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
- budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
- break;
- }
- break;
-
- case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059))
- budget_ci->budget.dvb_frontend =
- dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap);
- if (budget_ci->budget.dvb_frontend) {
- budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params;
- break;
- }
- break;
-
- case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt))
- budget_ci->tuner_pll_address = 0x61;
- budget_ci->budget.dvb_frontend =
- dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
- if (budget_ci->budget.dvb_frontend) {
- budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params;
- break;
- }
- break;
-
- case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889)
- budget_ci->tuner_pll_address = 0x63;
- budget_ci->budget.dvb_frontend =
- dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
- if (budget_ci->budget.dvb_frontend) {
- budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
- budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
- break;
- }
- break;
-
- case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
- budget_ci->tuner_pll_address = 0x60;
- budget_ci->budget.dvb_frontend =
- dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap);
- if (budget_ci->budget.dvb_frontend) {
- budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
- budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
- break;
- }
- break;
-
- case 0x1017: // TT S-1500 PCI
- budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap);
- if (budget_ci->budget.dvb_frontend) {
- budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
- budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
-
- budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
- if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) {
- printk("%s: No LNBP21 found!\n", __func__);
- dvb_frontend_detach(budget_ci->budget.dvb_frontend);
- budget_ci->budget.dvb_frontend = NULL;
- }
- }
- break;
-
- case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */
- budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48);
- if (budget_ci->budget.dvb_frontend) {
- if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) {
- printk(KERN_ERR "%s: No tda827x found!\n", __func__);
- dvb_frontend_detach(budget_ci->budget.dvb_frontend);
- budget_ci->budget.dvb_frontend = NULL;
- }
- }
- break;
-
- case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */
- budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap);
- if (budget_ci->budget.dvb_frontend) {
- if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) {
- if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
- printk(KERN_ERR "%s: No LNBP21 found!\n", __func__);
- dvb_frontend_detach(budget_ci->budget.dvb_frontend);
- budget_ci->budget.dvb_frontend = NULL;
- }
- } else {
- printk(KERN_ERR "%s: No STB6000 found!\n", __func__);
- dvb_frontend_detach(budget_ci->budget.dvb_frontend);
- budget_ci->budget.dvb_frontend = NULL;
- }
- }
- break;
-
- case 0x1019: // TT S2-3200 PCI
- /*
- * NOTE! on some STB0899 versions, the internal PLL takes a longer time
- * to settle, aka LOCK. On the older revisions of the chip, we don't see
- * this, as a result on the newer chips the entire clock tree, will not
- * be stable after a freshly POWER 'ed up situation.
- * In this case, we should RESET the STB0899 (Active LOW) and wait for
- * PLL stabilization.
- *
- * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is
- * connected to the SAA7146 GPIO, GPIO2, Pin 142
- */
- /* Reset Demodulator */
- saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO);
- /* Wait for everything to die */
- msleep(50);
- /* Pull it up out of Reset state */
- saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI);
- /* Wait for PLL to stabilize */
- msleep(250);
- /*
- * PLL state should be stable now. Ideally, we should check
- * for PLL LOCK status. But well, never mind!
- */
- budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap);
- if (budget_ci->budget.dvb_frontend) {
- if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) {
- if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
- printk("%s: No LNBP21 found!\n", __func__);
- dvb_frontend_detach(budget_ci->budget.dvb_frontend);
- budget_ci->budget.dvb_frontend = NULL;
- }
- } else {
- dvb_frontend_detach(budget_ci->budget.dvb_frontend);
- budget_ci->budget.dvb_frontend = NULL;
- }
- }
- break;
-
- }
-
- if (budget_ci->budget.dvb_frontend == NULL) {
- printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
- budget_ci->budget.dev->pci->vendor,
- budget_ci->budget.dev->pci->device,
- budget_ci->budget.dev->pci->subsystem_vendor,
- budget_ci->budget.dev->pci->subsystem_device);
- } else {
- if (dvb_register_frontend
- (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
- printk("budget-ci: Frontend registration failed!\n");
- dvb_frontend_detach(budget_ci->budget.dvb_frontend);
- budget_ci->budget.dvb_frontend = NULL;
- }
- }
-}
-
-static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
-{
- struct budget_ci *budget_ci;
- int err;
-
- budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL);
- if (!budget_ci) {
- err = -ENOMEM;
- goto out1;
- }
-
- dprintk(2, "budget_ci: %p\n", budget_ci);
-
- dev->ext_priv = budget_ci;
-
- err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE,
- adapter_nr);
- if (err)
- goto out2;
-
- err = msp430_ir_init(budget_ci);
- if (err)
- goto out3;
-
- ciintf_init(budget_ci);
-
- budget_ci->budget.dvb_adapter.priv = budget_ci;
- frontend_init(budget_ci);
-
- ttpci_budget_init_hooks(&budget_ci->budget);
-
- return 0;
-
-out3:
- ttpci_budget_deinit(&budget_ci->budget);
-out2:
- kfree(budget_ci);
-out1:
- return err;
-}
-
-static int budget_ci_detach(struct saa7146_dev *dev)
-{
- struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
- struct saa7146_dev *saa = budget_ci->budget.dev;
- int err;
-
- if (budget_ci->budget.ci_present)
- ciintf_deinit(budget_ci);
- msp430_ir_deinit(budget_ci);
- if (budget_ci->budget.dvb_frontend) {
- dvb_unregister_frontend(budget_ci->budget.dvb_frontend);
- dvb_frontend_detach(budget_ci->budget.dvb_frontend);
- }
- err = ttpci_budget_deinit(&budget_ci->budget);
-
- // disable frontend and CI interface
- saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
-
- kfree(budget_ci);
-
- return err;
-}
-
-static struct saa7146_extension budget_extension;
-
-MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC);
-MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT);
-
-static const struct pci_device_id pci_tbl[] = {
- MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
- MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f),
- MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010),
- MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
- MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
- MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
- MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a),
- MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019),
- MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b),
- {
- .vendor = 0,
- }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_tbl);
-
-static struct saa7146_extension budget_extension = {
- .name = "budget_ci dvb",
- .flags = SAA7146_USE_I2C_IRQ,
-
- .module = THIS_MODULE,
- .pci_tbl = &pci_tbl[0],
- .attach = budget_ci_attach,
- .detach = budget_ci_detach,
-
- .irq_mask = MASK_03 | MASK_06 | MASK_10,
- .irq_func = budget_ci_irq,
-};
-
-static int __init budget_ci_init(void)
-{
- return saa7146_register_extension(&budget_extension);
-}
-
-static void __exit budget_ci_exit(void)
-{
- saa7146_unregister_extension(&budget_extension);
-}
-
-module_init(budget_ci_init);
-module_exit(budget_ci_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards w/ CI-module produced by Siemens, Technotrend, Hauppauge");