Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - V4L2 API additions to better support JPEG compression control
 - media API additions to properly support MPEG decoders
 - V4L2 API additions for image crop/scaling
 - a few other V4L2 API DocBook fixes/improvements
 - two new DVB frontend drivers: m88rs2000 and rtl2830
 - two new DVB drivers: az6007 and rtl28xxu
 - a framework for ISA drivers, that removed lots of common code found
   at the ISA radio drivers
 - a new FM transmitter driver (radio-keene)
 - a GPIO-based IR receiver driver
 - a new sensor driver: mt9m032
 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
   vs6624
 - several new board additions, driver fixes, improvements and cleanups.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
  [media] update CARDLIST.em28xx
  [media] partially reverts changeset fa5527c
  [media] stb0899: fix the limits for signal strength values
  [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
  [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
  [media] -EINVAL -> -ENOTTY
  [media] gspca - sn9c20x: Cleanup source
  [media] gspca - sn9c20x: Simplify register write for capture start/stop
  [media] gspca - sn9c20x: Add automatic JPEG compression mechanism
  [media] gspca - sn9c20x: Greater delay in case of sensor no response
  [media] gspca - sn9c20x: Optimize the code of write sequences
  [media] gspca - sn9c20x: Add the JPEG compression quality control
  [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
  [media] gspca - sn9c20x: Propagate USB errors to higher level
  [media] gspca - sn9c20x: Use the new video control mechanism
  [media] gspca - sn9c20x: Fix loss of frame start
  [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
  [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
  [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
  [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
  ...

1 files changed, 59 insertions, 0 deletions

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 065d0f6be4a0..53aae5968ffb 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -33,6 +33,7 @@
 #include "tea5767.h"
 #include "tda18271.h"
 #include "xc5000.h"
+#include "s5h1411.h"
 
 /* commly used strings */
 static char name_mute[]    = "mute";
@@ -5712,6 +5713,36 @@ struct saa7134_board saa7134_boards[] = {
 			.amux   = LINE1,
 		} },
 	},
+	[SAA7134_BOARD_KWORLD_PC150U] = {
+		.name           = "Kworld PC150-U",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_TDA8290,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.mpeg           = SAA7134_MPEG_DVB,
+		.gpiomask       = 1 << 21,
+		.ts_type	= SAA7134_MPEG_TS_PARALLEL,
+		.inputs = { {
+			.name   = name_tv,
+			.vmux   = 1,
+			.amux   = TV,
+			.tv     = 1,
+		}, {
+			.name   = name_comp,
+			.vmux   = 3,
+			.amux   = LINE1,
+		}, {
+			.name   = name_svideo,
+			.vmux   = 8,
+			.amux   = LINE2,
+		} },
+		.radio = {
+			.name   = name_radio,
+			.amux   = TV,
+			.gpio	= 0x0000000,
+		},
+	},
 
 };
 
@@ -6306,6 +6337,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.driver_data  = SAA7134_BOARD_KWORLD_ATSC110, /* ATSC 115 */
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */
+		.subvendor    = 0x17de,
+		.subdevice    = 0xa134,
+		.driver_data  = SAA7134_BOARD_KWORLD_PC150U,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
 		.subvendor    = 0x1461,
 		.subdevice    = 0x7360,
@@ -7134,6 +7171,23 @@ static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev,
 	return 0;
 }
 
+static int saa7134_kworld_pc150u_toggle_agc(struct saa7134_dev *dev,
+					    enum tda18271_mode mode)
+{
+	switch (mode) {
+	case TDA18271_ANALOG:
+		saa7134_set_gpio(dev, 18, 0);
+		break;
+	case TDA18271_DIGITAL:
+		saa7134_set_gpio(dev, 18, 1);
+		msleep(30);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
 					  int command, int arg)
 {
@@ -7150,6 +7204,9 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
 		case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
 			ret = saa7134_kworld_sbtvd_toggle_agc(dev, arg);
 			break;
+		case SAA7134_BOARD_KWORLD_PC150U:
+			ret = saa7134_kworld_pc150u_toggle_agc(dev, arg);
+			break;
 		default:
 			break;
 		}
@@ -7171,6 +7228,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev,
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
 	case SAA7134_BOARD_AVERMEDIA_M733A:
 	case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
+	case SAA7134_BOARD_KWORLD_PC150U:
 	case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2:
 		/* tda8290 + tda18271 */
 		ret = saa7134_tda8290_18271_callback(dev, command, arg);
@@ -7452,6 +7510,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_BEHOLD_X7:
 	case SAA7134_BOARD_BEHOLD_H7:
 	case SAA7134_BOARD_BEHOLD_A7:
+	case SAA7134_BOARD_KWORLD_PC150U:
 		dev->has_remote = SAA7134_REMOTE_I2C;
 		break;
 	case SAA7134_BOARD_AVERMEDIA_A169_B: