Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (3604): V4l printk fix V4L/DVB (3599c): Whitespace cleanups under Documentation/video4linux V4L/DVB (3599b): Whitespace cleanups under drivers/media V4L/DVB (3599a): Move drivers/usb/media to drivers/media/video V4L/DVB (3599): Implement new routing commands for wm8775 and cs53l32a. V4L/DVB (3598): Add bit algorithm adapter for the Conexant CX2341X boards. V4L/DVB (3597): Vivi: fix warning: implicit declaration of function 'in_interrupt' V4L/DVB (3588): Remove VIDIOC_G/S_AUDOUT from msp3400 V4L/DVB (3587): Always wake thread after routing change. V4L/DVB (3584): Implement V4L2_TUNER_MODE_LANG1_LANG2 audio mode V4L/DVB (3582): Implement correct msp3400 input/output routing V4L/DVB (3581): Add new media/msp3400.h header containing the routing macros V4L/DVB (3580): Last round of msp3400 cleanups before adding routing commands V4L/DVB (3579): Move msp_modus to msp3400-kthreads, add JP and KR std detection V4L/DVB (3578): Make scart definitions easier to handle V4L/DVB (3577): Cleanup audio input handling V4L/DVB (3575): Cxusb: fix i2c debug messages for bluebird devices V4L/DVB (3574): Cxusb: fix debug messages V4L/DVB (3573): Cxusb: remove FIXME: comment in bluebird_patch_dvico_firmware_download V4L/DVB (3572): Cxusb: conditionalize gpio write for the medion box ...
author: Linus Torvalds <torvalds@g5.osdl.org> 2006-03-25 08:37:36 -0800
committer: Linus Torvalds <torvalds@g5.osdl.org> 2006-03-25 08:37:36 -0800
commit: 368d17e068f691dba5a4f122c271db5ec9b2ebd6 (patch)
tree: 69954cea09e5efd4ad1b8268be0e1733a13b4fae /drivers/media
parent: a9312fb839e90668d05a90024f3a7e7ff646a4a3 (diff)
parent: 22fe087f0139e2f5cbe004f24f84cb1c08b4711e (diff)
download: linux-next-368d17e068f691dba5a4f122c271db5ec9b2ebd6.tar.gz
179 files changed, 47991 insertions, 1976 deletions
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index c2602b340491..baa9f58beffc 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -50,5 +50,19 @@ config VIDEO_IR
 config VIDEO_TVEEPROM
 	tristate
 
+config USB_DABUSB
+        tristate "DABUSB driver"
+        depends on USB
+        ---help---
+          A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
+          brought to you by the DAB-Team
+          <http://wwwbode.cs.tum.edu/Par/arch/dab/>.  This driver can be taken
+          as an example for URB-based bulk, control, and isochronous
+          transactions. URB's are explained in
+          <Documentation/usb/URB.txt>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called dabusb.
+
 endmenu
 
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 3870fa948cc0..523ab3851c7b 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -50,14 +50,15 @@ void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
 /********************************************************************************/
 /* common dma functions */
 
-void saa7146_dma_free(struct saa7146_dev *dev,struct saa7146_buf *buf)
+void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q,
+						struct saa7146_buf *buf)
 {
 	DEB_EE(("dev:%p, buf:%p\n",dev,buf));
 
 	BUG_ON(in_interrupt());
 
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_pci_unmap(dev->pci, &buf->vb.dma);
+	videobuf_dma_unmap(q, &buf->vb.dma);
 	videobuf_dma_free(&buf->vb.dma);
 	buf->vb.state = STATE_NEEDS_INIT;
 }
diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146_vbi.c
index 500bd3f05e16..063608462ebe 100644
--- a/drivers/media/common/saa7146_vbi.c
+++ b/drivers/media/common/saa7146_vbi.c
@@ -236,7 +236,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
 	}
 
 	if (buf->vb.size != size)
-		saa7146_dma_free(dev,buf);
+		saa7146_dma_free(dev,q,buf);
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
 		buf->vb.width  = llength;
@@ -247,7 +247,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
 		saa7146_pgtable_free(dev->pci, &buf->pt[2]);
 		saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
 
-		err = videobuf_iolock(dev->pci,&buf->vb, NULL);
+		err = videobuf_iolock(q,&buf->vb, NULL);
 		if (err)
 			goto oops;
 		err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2], buf->vb.dma.sglist, buf->vb.dma.sglen);
@@ -261,7 +261,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
 
  oops:
 	DEB_VBI(("error out.\n"));
-	saa7146_dma_free(dev,buf);
+	saa7146_dma_free(dev,q,buf);
 
 	return err;
 }
@@ -301,7 +301,7 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
 
 	DEB_VBI(("vb:%p\n",vb));
-	saa7146_dma_free(dev,buf);
+	saa7146_dma_free(dev,q,buf);
 }
 
 static struct videobuf_queue_ops vbi_qops = {
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 6b42713d97f4..e7079d1bd537 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -1275,7 +1275,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 	    buf->vb.field  != field      ||
 	    buf->vb.field  != fh->video_fmt.field  ||
 	    buf->fmt       != &fh->video_fmt) {
-		saa7146_dma_free(dev,buf);
+		saa7146_dma_free(dev,q,buf);
 	}
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
@@ -1304,7 +1304,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 			saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
 		}
 
-		err = videobuf_iolock(dev->pci,&buf->vb, &vv->ov_fb);
+		err = videobuf_iolock(q,&buf->vb, &vv->ov_fb);
 		if (err)
 			goto oops;
 		err = saa7146_pgtable_build(dev,buf);
@@ -1318,7 +1318,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 
  oops:
 	DEB_D(("error out.\n"));
-	saa7146_dma_free(dev,buf);
+	saa7146_dma_free(dev,q,buf);
 
 	return err;
 }
@@ -1363,7 +1363,7 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
 
 	DEB_CAP(("vbuf:%p\n",vb));
-	saa7146_dma_free(dev,buf);
+	saa7146_dma_free(dev,q,buf);
 }
 
 static struct videobuf_queue_ops video_qops = {
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c
index a6c91db40ad6..06ec9fff0ec1 100644
--- a/drivers/media/dvb/b2c2/flexcop-usb.c
+++ b/drivers/media/dvb/b2c2/flexcop-usb.c
@@ -541,6 +541,7 @@ static struct usb_device_id flexcop_usb_table [] = {
 	    { USB_DEVICE(0x0af7, 0x0101) },
 	    { }
 };
+MODULE_DEVICE_TABLE (usb, flexcop_usb_table);
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver flexcop_usb_driver = {
diff --git a/drivers/media/dvb/bt8xx/Makefile b/drivers/media/dvb/bt8xx/Makefile
index d188e4c670b5..9d197efb481d 100644
--- a/drivers/media/dvb/bt8xx/Makefile
+++ b/drivers/media/dvb/bt8xx/Makefile
@@ -1,3 +1,3 @@
 obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o
 
-EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video -Idrivers/media/dvb/frontends
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video/bt8xx -Idrivers/media/dvb/frontends
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index e14bf43941e3..a14e737ec848 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -81,18 +81,19 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
 		return -EAGAIN;
 
 	if (num > 2)
-		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+		warn("more than two i2c messages at a time is not handled yet. TODO.");
 
 	for (i = 0; i < num; i++) {
 
-		switch (msg[i].addr) {
-			case 0x63:
-				cxusb_gpio_tuner(d,0);
-				break;
-			default:
-				cxusb_gpio_tuner(d,1);
-				break;
-		}
+		if (d->udev->descriptor.idVendor == USB_VID_MEDION)
+			switch (msg[i].addr) {
+				case 0x63:
+					cxusb_gpio_tuner(d,0);
+					break;
+				default:
+					cxusb_gpio_tuner(d,1);
+					break;
+			}
 
 		/* read request */
 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
@@ -108,7 +109,7 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
 				break;
 
 			if (ibuf[0] != 0x08)
-				deb_info("i2c read could have been failed\n");
+				deb_i2c("i2c read may have failed\n");
 
 			memcpy(msg[i+1].buf,&ibuf[1],msg[i+1].len);
 
@@ -122,7 +123,7 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
 			if (cxusb_ctrl_msg(d,CMD_I2C_WRITE, obuf, 2+msg[i].len, &ibuf,1) < 0)
 				break;
 			if (ibuf != 0x08)
-				deb_info("i2c write could have been failed\n");
+				deb_i2c("i2c write may have failed\n");
 		}
 	}
 
@@ -410,7 +411,6 @@ static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, const
 	if (fw->data[BLUEBIRD_01_ID_OFFSET] == (USB_VID_DVICO & 0xff) &&
 	    fw->data[BLUEBIRD_01_ID_OFFSET + 1] == USB_VID_DVICO >> 8) {
 
-		/* FIXME: are we allowed to change the fw-data ? */
 		fw->data[BLUEBIRD_01_ID_OFFSET + 2] = udev->descriptor.idProduct + 1;
 		fw->data[BLUEBIRD_01_ID_OFFSET + 3] = udev->descriptor.idProduct >> 8;
 
diff --git a/drivers/media/dvb/dvb-usb/cxusb.h b/drivers/media/dvb/dvb-usb/cxusb.h
index 087c99427853..c8ef77554b00 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.h
+++ b/drivers/media/dvb/dvb-usb/cxusb.h
@@ -6,6 +6,8 @@
 
 extern int dvb_usb_cxusb_debug;
 #define deb_info(args...)   dprintk(dvb_usb_cxusb_debug,0x01,args)
+#define deb_i2c(args...)    if (d->udev->descriptor.idVendor == USB_VID_MEDION) \
+				dprintk(dvb_usb_cxusb_debug,0x01,args)
 
 /* usb commands - some of it are guesses, don't have a reference yet */
 #define CMD_I2C_WRITE     0x08
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 2f23ceab8d44..603a22e4bfe2 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -369,6 +369,11 @@ static int av7110_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
 			fm_matrix = 0x3001; // stereo
 			src = 0x0020;
 			break;
+		case V4L2_TUNER_MODE_LANG1_LANG2:
+			dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1_LANG2\n");
+			fm_matrix = 0x3000; // bilingual
+			src = 0x0020;
+			break;
 		case V4L2_TUNER_MODE_LANG1:
 			dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1\n");
 			fm_matrix = 0x3000; // mono
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index c622a4da5663..f31a19890b15 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -16,31 +16,7 @@ config VIDEO_ADV_DEBUG
 	  V4L devices.
 	  In doubt, say N.
 
-config VIDEO_BT848
-	tristate "BT848 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C
-	select I2C_ALGOBIT
-	select FW_LOADER
-	select VIDEO_BTCX
-	select VIDEO_BUF
-	select VIDEO_IR
-	select VIDEO_TUNER
-	select VIDEO_TVEEPROM
-	select VIDEO_MSP3400
-	---help---
-	  Support for BT848 based frame grabber/overlay boards. This includes
-	  the Miro, Hauppauge and STB boards. Please read the material in
-	  <file:Documentation/video4linux/bttv/> for more information.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bttv.
-
-config VIDEO_BT848_DVB
-	bool "DVB/ATSC Support for bt878 based TV cards"
-	depends on VIDEO_BT848 && DVB_CORE
-	select DVB_BT8XX
-	---help---
-	  This adds support for DVB/ATSC cards based on the BT878 chip.
+source "drivers/media/video/bt8xx/Kconfig"
 
 config VIDEO_SAA6588
 	tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
@@ -315,8 +291,6 @@ config VIDEO_HEXIUM_GEMINI
 
 source "drivers/media/video/cx88/Kconfig"
 
-source "drivers/media/video/em28xx/Kconfig"
-
 config VIDEO_OVCAMCHIP
 	tristate "OmniVision Camera Chip support"
 	depends on VIDEO_DEV && I2C
@@ -391,4 +365,234 @@ config VIDEO_SAA7127
 	  To compile this driver as a module, choose M here: the
 	  module will be called saa7127
 
+#
+# USB Multimedia device configuration
+#
+
+menu "V4L USB devices"
+	depends on USB && VIDEO_DEV
+
+source "drivers/media/video/em28xx/Kconfig"
+
+config USB_VICAM
+	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
+	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	---help---
+	  Say Y here if you have 3com homeconnect camera (vicam).
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Multimedia Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vicam.
+
+config USB_DSBR
+	tristate "D-Link USB FM radio support (EXPERIMENTAL)"
+	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	---help---
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port. Note that the audio is not digital, and
+	  you must connect the line out connector to a sound card or a
+	  set of speakers.
+
+	  This driver uses the Video For Linux API.  You must enable
+	  (Y or M in config) Video For Linux (under Character Devices)
+	  to use this driver.  Information on this API and pointers to
+	  "v4l" programs may be found at
+	  <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dsbr100.
+
+config USB_ET61X251
+	tristate "USB ET61X[12]51 PC Camera Controller support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want support for cameras based on Etoms ET61X151
+	  or ET61X251 PC Camera Controllers.
+
+	  See <file:Documentation/usb/et61x251.txt> for more informations.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" to use this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called et61x251.
+
+config USB_IBMCAM
+	tristate "USB IBM (Xirlink) C-it Camera support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want to connect a IBM "C-It" camera, also known as
+	  "Xirlink PC Camera" to your computer's USB port.  For more
+	  information, read <file:Documentation/usb/ibmcam.txt>.
+
+	  This driver uses the Video For Linux API.  You must enable
+	  (Y or M in config) Video For Linux (under Character Devices)
+	  to use this driver.  Information on this API and pointers to
+	  "v4l" programs may be found at
+	  <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ibmcam.
+
+	  This camera has several configuration options which
+	  can be specified when you load the module. Read
+	  <file:Documentation/usb/ibmcam.txt> to learn more.
+
+config USB_KONICAWC
+	tristate "USB Konica Webcam support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want support for webcams based on a Konica
+	  chipset. This is known to work with the Intel YC76 webcam.
+
+	  This driver uses the Video For Linux API.  You must enable
+	  (Y or M in config) Video For Linux (under Character Devices)
+	  to use this driver.  Information on this API and pointers to
+	  "v4l" programs may be found at
+	  <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called konicawc.
+
+config USB_OV511
+	tristate "USB OV511 Camera support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want to connect this type of camera to your
+	  computer's USB port. See <file:Documentation/usb/ov511.txt> for more
+	  information and for a list of supported cameras.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Character Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ov511.
+
+config USB_SE401
+	tristate "USB SE401 Camera support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want to connect this type of camera to your
+	  computer's USB port. See <file:Documentation/usb/se401.txt> for more
+	  information and for a list of supported cameras.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Multimedia Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called se401.
+
+config USB_SN9C102
+	tristate "USB SN9C10x PC Camera Controller support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want support for cameras based on SONiX SN9C101,
+	  SN9C102 or SN9C103 PC Camera Controllers.
+
+	  See <file:Documentation/usb/sn9c102.txt> for more informations.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" to use this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sn9c102.
+
+config USB_STV680
+	tristate "USB STV680 (Pencam) Camera support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want to connect this type of camera to your
+	  computer's USB port. This includes the Pencam line of cameras.
+	  See <file:Documentation/usb/stv680.txt> for more information and for
+	  a list of supported cameras.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Multimedia Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stv680.
+
+config USB_W9968CF
+	tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+	depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP
+	---help---
+	  Say Y here if you want support for cameras based on OV681 or
+	  Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
+
+	  This driver has an optional plugin, which is distributed as a
+	  separate module only (released under GPL). It allows to use higher
+	  resolutions and framerates, but cannot be included in the official
+	  Linux kernel for performance purposes.
+
+	  See <file:Documentation/usb/w9968cf.txt> for more informations.
+
+	  This driver uses the Video For Linux and the I2C APIs. It needs the
+	  OmniVision Camera Chip support as well. You must say Y or M to
+	  "Video For Linux", "I2C Support" and "OmniVision Camera Chip
+	  support" to use this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w9968cf.
+
+config USB_ZC0301
+	tristate "USB ZC0301 Image Processor and Control Chip support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want support for cameras based on the ZC0301
+	  Image Processor and Control Chip.
+
+	  See <file:Documentation/usb/zc0301.txt> for more informations.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" to use this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zc0301.
+
+config USB_PWC
+	tristate "USB Philips Cameras"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y or M here if you want to use one of these Philips & OEM
+	  webcams:
+	   * Philips PCA645, PCA646
+	   * Philips PCVC675, PCVC680, PCVC690
+	   * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
+	   * Askey VC010
+	   * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'
+	     and 'Orbit'/'Sphere'
+	   * Samsung MPC-C10, MPC-C30
+	   * Creative Webcam 5, Pro Ex
+	   * SOTEC Afina Eye
+	   * Visionite VCS-UC300, VCS-UM100
+
+	  The PCA635, PCVC665 and PCVC720/20 are not supported by this driver
+	  and never will be, but the 665 and 720/20 are supported by other
+	  drivers.
+
+	  See <file:Documentation/usb/philips.txt> for more information and
+	  installation instructions.
+
+	  The built-in microphone is enabled by selecting USB Audio support.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Character Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pwc.
+
+endmenu # V4L USB devices
+
 endmenu
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index f2bd4c0c4f10..1c0e72e5a593 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -2,9 +2,6 @@
 # Makefile for the video capture/playback device drivers.
 #
 
-bttv-objs	:=	bttv-driver.o bttv-cards.o bttv-if.o \
-			bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \
-			bttv-input.o
 zoran-objs      :=	zr36120.o zr36120_i2c.o zr36120_mem.o
 zr36067-objs	:=	zoran_procfs.o zoran_device.o \
 			zoran_driver.o zoran_card.o
@@ -15,8 +12,8 @@ msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
 
 obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
 
-obj-$(CONFIG_VIDEO_BT848) += bttv.o tvaudio.o \
-	tda7432.o tda9875.o ir-kbd-i2c.o
+obj-$(CONFIG_VIDEO_BT848) += bt8xx/
+obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
 obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o
 
 obj-$(CONFIG_VIDEO_ZR36120) += zoran.o
@@ -68,4 +65,23 @@ obj-$(CONFIG_VIDEO_CX25840) += cx25840/
 obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o
 obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
 
+et61x251-objs   := et61x251_core.o et61x251_tas5130d1b.o
+zc0301-objs     := zc0301_core.o zc0301_pas202bcb.o
+
+obj-$(CONFIG_USB_DABUSB)        += dabusb.o
+obj-$(CONFIG_USB_DSBR)          += dsbr100.o
+obj-$(CONFIG_USB_OV511)         += ov511.o
+obj-$(CONFIG_USB_SE401)         += se401.o
+obj-$(CONFIG_USB_STV680)        += stv680.o
+obj-$(CONFIG_USB_W9968CF)       += w9968cf.o
+
+obj-$(CONFIG_USB_SN9C102)       += sn9c102/
+obj-$(CONFIG_USB_ET61X251)      += et61x251/
+obj-$(CONFIG_USB_PWC)           += pwc/
+obj-$(CONFIG_USB_ZC0301)        += zc0301/
+
+obj-$(CONFIG_USB_IBMCAM)        += usbvideo/
+obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
+obj-$(CONFIG_USB_VICAM)         += usbvideo/
+
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
index 671e36db224d..48709582a186 100644
--- a/drivers/media/video/adv7170.c
+++ b/drivers/media/video/adv7170.c
@@ -1,9 +1,9 @@
-/* 
+/*
  * adv7170 - adv7170, adv7171 video encoder driver version 0.0.1
  *
  * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
  *
- * Based on adv7176 driver by:    
+ * Based on adv7176 driver by:
  *
  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
  * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net>
@@ -173,7 +173,7 @@ adv7170_write_block (struct i2c_client *client,
 static const unsigned char init_NTSC[] = {
 	0x00, 0x10,		// MR0
 	0x01, 0x20,		// MR1
-	0x02, 0x0e,		// MR2 RTC control: bits 2 and 1 
+	0x02, 0x0e,		// MR2 RTC control: bits 2 and 1
 	0x03, 0x80,		// MR3
 	0x04, 0x30,		// MR4
 	0x05, 0x00,		// Reserved
@@ -196,7 +196,7 @@ static const unsigned char init_NTSC[] = {
 	0x16, 0x00,		// CGMS_WSS_0
 	0x17, 0x00,		// CGMS_WSS_1
 	0x18, 0x00,		// CGMS_WSS_2
-	0x19, 0x00,		// Teletext Ctl 
+	0x19, 0x00,		// Teletext Ctl
 };
 
 static const unsigned char init_PAL[] = {
@@ -381,7 +381,7 @@ static unsigned short normal_i2c[] =
 };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
index 085e8863cacb..68e7d7aff5e6 100644
--- a/drivers/media/video/adv7175.c
+++ b/drivers/media/video/adv7175.c
@@ -1,4 +1,4 @@
-/* 
+/*
  *  adv7175 - adv7175a video encoder driver version 0.0.3
  *
  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
@@ -233,7 +233,7 @@ adv7175_command (struct i2c_client *client,
 				    sizeof(init_common));
 		adv7175_write(client, 0x07, TR0MODE | TR0RST);
 		adv7175_write(client, 0x07, TR0MODE);
-	        break;
+		break;
 
 	case ENCODER_GET_CAPABILITIES:
 	{
@@ -399,7 +399,7 @@ static unsigned short normal_i2c[] =
 };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index c586f64b6b7f..dbe025170599 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -161,39 +161,39 @@ void iic(int n, unsigned long addr, unsigned long data1, unsigned long data2,
 {
 	int i;
 
-  	/* Slave Address */
-  	ar_outl(addr, PLDI2CDATA);
+	/* Slave Address */
+	ar_outl(addr, PLDI2CDATA);
 	wait_for_vsync();
 
-  	/* Start */
-  	ar_outl(1, PLDI2CCND);
+	/* Start */
+	ar_outl(1, PLDI2CCND);
 	wait_acknowledge();
 
 	/* Transfer data 1 */
-  	ar_outl(data1, PLDI2CDATA);
+	ar_outl(data1, PLDI2CDATA);
 	wait_for_vsync();
-  	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
+	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
 	wait_acknowledge();
 
 	/* Transfer data 2 */
-  	ar_outl(data2, PLDI2CDATA);
+	ar_outl(data2, PLDI2CDATA);
 	wait_for_vsync();
-  	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
+	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
 	wait_acknowledge();
 
 	if (n == 3) {
 		/* Transfer data 3 */
-	  	ar_outl(data3, PLDI2CDATA);
+		ar_outl(data3, PLDI2CDATA);
 		wait_for_vsync();
-	  	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
+		ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
 		wait_acknowledge();
-  	}
+	}
 
-  	/* Stop */
+	/* Stop */
 	for (i = 0; i < 100; i++)
 		cpu_relax();
-  	ar_outl(2, PLDI2CCND);
-  	ar_outl(2, PLDI2CCND);
+	ar_outl(2, PLDI2CCND);
+	ar_outl(2, PLDI2CCND);
 
 	while (ar_inl(PLDI2CSTS) & PLDI2CSTS_BB)
 		cpu_relax();
@@ -204,24 +204,24 @@ void init_iic(void)
 {
 	DEBUG(1, "init_iic:\n");
 
-  	/*
+	/*
 	 * ICU Setting (iic)
 	 */
-  	/* I2C Setting */
-  	ar_outl(0x0, PLDI2CCR);      	/* I2CCR Disable                   */
-  	ar_outl(0x0300, PLDI2CMOD); 	/* I2CMOD ACK/8b-data/7b-addr/auto */
-  	ar_outl(0x1, PLDI2CACK);	/* I2CACK ACK                      */
+	/* I2C Setting */
+	ar_outl(0x0, PLDI2CCR);      	/* I2CCR Disable                   */
+	ar_outl(0x0300, PLDI2CMOD); 	/* I2CMOD ACK/8b-data/7b-addr/auto */
+	ar_outl(0x1, PLDI2CACK);	/* I2CACK ACK                      */
 
     	/* I2C CLK */
-   	/* 50MH-100k */
+	/* 50MH-100k */
 	if (freq == 75) {
-  		ar_outl(369, PLDI2CFREQ);	/* BCLK = 75MHz */
+		ar_outl(369, PLDI2CFREQ);	/* BCLK = 75MHz */
 	} else if (freq == 50) {
 		ar_outl(244, PLDI2CFREQ);	/* BCLK = 50MHz */
 	} else {
 		ar_outl(244, PLDI2CFREQ);	/* default: BCLK = 50MHz */
 	}
-  	ar_outl(0x1, PLDI2CCR); 	/* I2CCR Enable */
+	ar_outl(0x1, PLDI2CCR); 	/* I2CCR Enable */
 }
 
 /**************************************************************************
@@ -253,7 +253,7 @@ static inline void wait_for_vertical_sync(int exp_line)
 
 	/*
 	 * check HCOUNT because we cannot check vertical sync.
- 	 */
+	 */
 	for (; tmout >= 0; tmout--) {
 		l = ar_inl(ARVHCOUNT);
 		if (l == exp_line)
@@ -562,8 +562,8 @@ static void ar_interrupt(int irq, void *dev, struct pt_regs *regs)
 		/* operations for interlace mode */
 		if ( line_count < (AR_HEIGHT_VGA/2) ) 	/* even line */
 			line_number = (line_count << 1);
-		else 		  			/* odd line */
- 			line_number =
+		else 					/* odd line */
+			line_number =
 			(((line_count - (AR_HEIGHT_VGA/2)) << 1) + 1);
 	} else {
 		line_number = line_count;
@@ -651,7 +651,7 @@ static int ar_initialize(struct video_device *dev)
 		cr |= ARVCR1_NORMAL;
 	ar_outl(cr, ARVCR1);
 
-  	/*
+	/*
 	 * Initialize IIC so that CPU can communicate with AR LSI,
 	 * and send boot commands to AR LSI.
 	 */
@@ -846,7 +846,7 @@ static int __init ar_init(void)
 	 * so register video device as a frame grabber type.
 	 * device is named "video[0-64]".
 	 * video_register_device() initializes h/w using ar_initialize().
- 	 */
+	 */
 	if (video_register_device(ar->vdev, VFL_TYPE_GRABBER, video_nr) != 0) {
 		/* return -1, -ENFILE(full) or others */
 		printk("arv: register video (Colour AR) failed.\n");
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index d8a18a6a5bee..e7b38fdd5e3c 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -1,4 +1,4 @@
-/* 
+/*
  *  bt819 - BT819A VideoStream Decoder (Rockwell Part)
  *
  * Copyright (C) 1999 Mike Bernson <mike@mlb.org>
@@ -6,7 +6,7 @@
  *
  * Modifications for LML33/DC10plus unified driver
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *  
+ *
  * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
  *    - moved over to linux>=2.4.x i2c protocol (9/9/2002)
  *
@@ -206,9 +206,9 @@ bt819_init (struct i2c_client *client)
 					   Bug in the bt819 stepping on my board?
 					*/
 		0x14, 0x00,	/* 0x14 Vertial Scaling lsb */
-		0x16, 0x07,	/* 0x16 Video Timing Polarity 
+		0x16, 0x07,	/* 0x16 Video Timing Polarity
 					   ACTIVE=active low
-					   FIELD: high=odd, 
+					   FIELD: high=odd,
 					   vreset=active high,
 					   hreset=active high */
 		0x18, 0x68,	/* 0x18 AGC Delay */
@@ -497,7 +497,7 @@ static unsigned short normal_i2c[] = {
 };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,
diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c
index 4d47a0a0e974..af3b61d4fa7d 100644
--- a/drivers/media/video/bt856.c
+++ b/drivers/media/video/bt856.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * bt856 - BT856A Digital Video Encoder (Rockwell Part)
  *
  * Copyright (C) 1999 Mike Bernson <mike@mlb.org>
@@ -285,7 +285,7 @@ bt856_command (struct i2c_client *client,
 static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
new file mode 100644
index 000000000000..085477c12612
--- /dev/null
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -0,0 +1,25 @@
+config VIDEO_BT848
+	tristate "BT848 Video For Linux"
+	depends on VIDEO_DEV && PCI && I2C
+	select I2C_ALGOBIT
+	select FW_LOADER
+	select VIDEO_BTCX
+	select VIDEO_BUF
+	select VIDEO_IR
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select VIDEO_MSP3400
+	---help---
+	  Support for BT848 based frame grabber/overlay boards. This includes
+	  the Miro, Hauppauge and STB boards. Please read the material in
+	  <file:Documentation/video4linux/bttv/> for more information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bttv.
+
+config VIDEO_BT848_DVB
+	bool "DVB/ATSC Support for bt878 based TV cards"
+	depends on VIDEO_BT848 && DVB_CORE
+	select DVB_BT8XX
+	---help---
+	  This adds support for DVB/ATSC cards based on the BT878 chip.
diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile
new file mode 100644
index 000000000000..94350f21cdc0
--- /dev/null
+++ b/drivers/media/video/bt8xx/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the video capture/playback device drivers.
+#
+
+bttv-objs      :=      bttv-driver.o bttv-cards.o bttv-if.o \
+		       bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \
+		       bttv-input.o
+
+obj-$(CONFIG_VIDEO_BT848) += bttv.o
+
+EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
diff --git a/drivers/media/video/bt832.c b/drivers/media/video/bt8xx/bt832.c
index cc54b62f4601..a51876137880 100644
--- a/drivers/media/video/bt832.c
+++ b/drivers/media/video/bt8xx/bt832.c
@@ -30,7 +30,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 
 #include "bttv.h"
@@ -39,7 +38,7 @@
 MODULE_LICENSE("GPL");
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { I2C_BT832_ALT1>>1, I2C_BT832_ALT2>>1,
+static unsigned short normal_i2c[] = { I2C_ADDR_BT832_ALT1>>1, I2C_ADDR_BT832_ALT2>>1,
 				       I2C_CLIENT_END };
 I2C_CLIENT_INSMOD;
 
diff --git a/drivers/media/video/bt832.h b/drivers/media/video/bt8xx/bt832.h
index 1ce8fa71f7db..1ce8fa71f7db 100644
--- a/drivers/media/video/bt832.h
+++ b/drivers/media/video/bt8xx/bt832.h
diff --git a/drivers/media/video/bt848.h b/drivers/media/video/bt8xx/bt848.h
index 0bcd95303bb0..0bcd95303bb0 100644
--- a/drivers/media/video/bt848.h
+++ b/drivers/media/video/bt8xx/bt848.h
diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index abfa6ad857a0..f209a7492051 100644
--- a/drivers/media/video/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -39,6 +39,7 @@
 
 #include "bttvp.h"
 #include <media/v4l2-common.h>
+#include <media/tvaudio.h>
 
 /* fwd decl */
 static void boot_msp34xx(struct bttv *btv, int pin);
@@ -336,7 +337,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 15,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 2, 0, 0, 0, 10 },
+		.gpiomux 	= { 2, 0, 0, 0 },
+		.gpiomute 	= 10,
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -350,7 +352,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 7,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 1, 2, 3, 4 },
+		.gpiomux 	= { 0, 1, 2, 3 },
+		.gpiomute 	= 4,
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -364,7 +367,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 7,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 4, 0, 2, 3, 1 },
+		.gpiomux 	= { 4, 0, 2, 3 },
+		.gpiomute 	= 1,
 		.no_msp34xx	= 1,
 		.needs_tvaudio	= 1,
 		.tuner_type     = TUNER_PHILIPS_NTSC,
@@ -383,7 +387,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0 },
+		.gpiomux 	= { 0 },
 		.needs_tvaudio	= 0,
 		.tuner_type	= 4,
 		.tuner_addr	= ADDR_UNSET,
@@ -397,7 +401,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 3,
 		.muxsel		= { 2, 3, 1, 0 },
-		.audiomux	= { 0, 1, 0, 1, 3 },
+		.gpiomux 	= { 0, 1, 0, 1 },
+		.gpiomute 	= 3,
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -411,7 +416,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 3,
 		.muxsel		= { 2, 3, 1, 1 },
 		.gpiomask	= 0x0f,
-		.audiomux	= { 0x0c, 0x04, 0x08, 0x04, 0 },
+		.gpiomux 	= { 0x0c, 0x04, 0x08, 0x04 },
 		/*                0x04 for some cards ?? */
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
@@ -428,7 +433,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 3,
 		.gpiomask	= 0,
 		.muxsel		= { 2, 3, 1, 0, 0 },
-		.audiomux	= { 0 },
+		.gpiomux 	= { 0 },
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -444,7 +449,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0xc00,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 0xc00, 0x800, 0x400, 0xc00, 0 },
+		.gpiomux 	= { 0, 0xc00, 0x800, 0x400 },
+		.gpiomute 	= 0xc00,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -459,7 +465,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 3,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 1, 1, 2, 3, 0 },
+		.gpiomux 	= { 1, 1, 2, 3 },
 		.needs_tvaudio	= 0,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_TEMIC_PAL,
@@ -474,7 +480,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x0f, /* old: 7 */
 		.muxsel		= { 2, 0, 1, 1 },
-		.audiomux	= { 0, 1, 2, 3, 4 },
+		.gpiomux 	= { 0, 1, 2, 3 },
+		.gpiomute 	= 4,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -489,7 +496,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x3014f,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0x20001,0x10001, 0, 0,10 },
+		.gpiomux 	= { 0x20001,0x10001, 0, 0 },
+		.gpiomute 	= 10,
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -505,7 +513,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 15,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 13, 14, 11, 7, 0, 0 },
+		.gpiomux 	= { 13, 14, 11, 7 },
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -519,7 +527,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 15,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 13, 14, 11, 7, 0, 0 },
+		.gpiomux 	= { 13, 14, 11, 7 },
 		.needs_tvaudio	= 1,
 		.msp34xx_alt    = 1,
 		.pll		= PLL_28,
@@ -537,7 +545,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 7,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 2, 1, 3, 4 }, /* old: {0, 1, 2, 3, 4} */
+		.gpiomux 	= { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
+		.gpiomute 	= 4,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -552,7 +561,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 15,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0 , 0, 1 , 0, 10 },
+		.gpiomux 	= { 0, 0, 1, 0 },
+		.gpiomute 	= 10,
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -570,10 +580,11 @@ struct tvcard bttv_tvcards[] = {
 		.muxsel		= { 2, 3, 1, 1 },
 	#if 0
 		/* old */
-		.audiomux	= { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
+		.gpiomux 	= { 0x01c000, 0, 0x018000, 0x014000, 0x002000 },
 	#else
 		/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
-		.audiomux       = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
+		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
+		.gpiomute 	= 0x002000,
 	#endif
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
@@ -587,7 +598,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x8300f8,
 		.muxsel		= { 2, 3, 1, 1,0 },
-		.audiomux	= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007 },
+		.gpiomux 	= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
+		.gpiomute 	= 0xcfa007,
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -603,7 +615,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 1, 0, 0, 0, 0 },
+		.gpiomux 	= { 1, 0, 0, 0 },
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -617,7 +629,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= -1,
 		.gpiomask	= 0x8dff00,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0 },
+		.gpiomux 	= { 0 },
 		.no_msp34xx	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -644,7 +656,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x1800,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 0x800, 0x1000, 0x1000, 0x1800 },
+		.gpiomux 	= { 0, 0x800, 0x1000, 0x1000 },
+		.gpiomute 	= 0x1800,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL_I,
 		.tuner_addr	= ADDR_UNSET,
@@ -658,7 +671,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0xc00,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 1, 0x800, 0x400, 0xc00, 0 },
+		.gpiomux 	= { 0, 1, 0x800, 0x400 },
+		.gpiomute 	= 0xc00,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -674,7 +688,7 @@ struct tvcard bttv_tvcards[] = {
 		.gpiomask	= 7,
 		.muxsel		= { 2, 3, -1 },
 		.digital_mode   = DIGITAL_MODE_CAMERA,
-		.audiomux	= { 0, 0, 0, 0, 0 },
+		.gpiomux 	= { 0, 0, 0, 0 },
 		.no_msp34xx	= 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
@@ -691,7 +705,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0xe00,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= {0x400, 0x400, 0x400, 0x400, 0xc00 },
+		.gpiomux 	= {0x400, 0x400, 0x400, 0x400 },
+		.gpiomute 	= 0xc00,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -707,7 +722,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask       = 0x1f0fff,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux       = { 0x20000, 0x30000, 0x10000, 0, 0x40000 },
+		.gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
+		.gpiomute 	= 0x40000,
 		.needs_tvaudio	= 0,
 		.tuner_type	= TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -722,7 +738,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 3,
 		.gpiomask	= 7,
 		.muxsel		= { 2, 0, 1, 1 },
-		.audiomux	= { 0, 1, 2, 3, 4 },
+		.gpiomux 	= { 0, 1, 2, 3 },
+		.gpiomute 	= 4,
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -736,7 +753,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x1800,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 0x800, 0x1000, 0x1000, 0x1800 },
+		.gpiomux 	= { 0, 0x800, 0x1000, 0x1000 },
+		.gpiomute 	= 0x1800,
 		.pll            = PLL_28,
 		.tuner_type	= TUNER_PHILIPS_SECAM,
 		.tuner_addr	= ADDR_UNSET,
@@ -752,7 +770,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x1f0fff,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000 },
+		.gpiomux 	= { 0x20000, 0x30000, 0x10000, 0x00000 },
+		.gpiomute 	= 0x40000,
 		.needs_tvaudio	= 0,
 		.tuner_type	= TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -799,7 +818,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 1, /* was: 4 */
 		.gpiomask	= 0,
 		.muxsel		= { 2, 3, 1, 0, 0},
-		.audiomux	= { 0 },
+		.gpiomux 	= { 0 },
 		.needs_tvaudio	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -815,7 +834,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x1800,  /* 0x8dfe00 */
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
+		.gpiomux 	= { 0, 0x0800, 0x1000, 0x1000 },
+		.gpiomute 	= 0x1800,
 		.pll            = PLL_28,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -829,7 +849,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 3,
 		.gpiomask	= 1,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 1, 0, 0, 0, 0 },
+		.gpiomux 	= { 1, 0, 0, 0 },
 		.pll            = PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -845,7 +865,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0 },
+		.gpiomux 	= { 0 },
 		.needs_tvaudio	= 0,
 		.tuner_type	= 4,
 		.tuner_addr	= ADDR_UNSET,
@@ -859,7 +879,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0xffff00,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0x500, 0, 0x300, 0x900, 0x900 },
+		.gpiomux 	= { 0x500, 0, 0x300, 0x900 },
+		.gpiomute 	= 0x900,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
@@ -875,11 +896,12 @@ struct tvcard bttv_tvcards[] = {
 		.muxsel		= { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
 	#if 0
 		.gpiomask	= 0xc33000,
-		.audiomux	= { 0x422000,0x1000,0x0000,0x620000,0x800000 },
+		.gpiomux 	= { 0x422000,0x1000,0x0000,0x620000,0x800000 },
 	#else
 		/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 		.gpiomask	= 0xb33000,
-		.audiomux	= { 0x122000,0x1000,0x0000,0x620000,0x800000 },
+		.gpiomux 	= { 0x122000,0x1000,0x0000,0x620000 },
+		.gpiomute 	= 0x800000,
 	#endif
 		/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 			gpio23 -- hef4052:nEnable (0x800000)
@@ -909,7 +931,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x1800,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 0x800, 0x1000, 0x1000, 0x1800 },
+		.gpiomux 	= { 0, 0x800, 0x1000, 0x1000 },
+		.gpiomute 	= 0x1800,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -925,7 +948,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x1800,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
+		.gpiomux 	= { 0, 0x800, 0x1000, 0x1000 },
+		.gpiomute 	= 0x1800,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -940,7 +964,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0xff,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
+		.gpiomux 	= { 0x21, 0x20, 0x24, 0x2c },
+		.gpiomute 	= 0x29,
 		.no_msp34xx	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -955,7 +980,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x551e00,
 		.muxsel		= { 2, 3, 1, 0 },
-		.audiomux	= { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
+		.gpiomux 	= { 0x551400, 0x551200, 0, 0 },
+		.gpiomute 	= 0x551c00,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= 1,
@@ -971,7 +997,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x03000F,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 2, 0xd0001, 0, 0, 1 },
+		.gpiomux 	= { 2, 0xd0001, 0, 0 },
+		.gpiomute 	= 1,
 		.needs_tvaudio	= 0,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -988,7 +1015,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 7,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 4, 0, 2, 3, 1 },
+		.gpiomux 	= { 4, 0, 2, 3 },
+		.gpiomute 	= 1,
 		.no_msp34xx	= 1,
 		.needs_tvaudio	= 1,
 		.tuner_type     = TUNER_PHILIPS_NTSC,
@@ -1005,7 +1033,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 15,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 13, 4, 11, 7, 0, 0 },
+		.gpiomux 	= { 13, 4, 11, 7 },
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -1022,7 +1050,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0,
 		.muxsel		= { 2, 3, 1, 1},
-		.audiomux	= { 0, 0, 0, 0, 0},
+		.gpiomux 	= { 0, 0, 0, 0},
 		.needs_tvaudio	= 1,
 		.no_msp34xx	= 1,
 		.pll		= PLL_28,
@@ -1038,7 +1066,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0xe00b,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc },
+		.gpiomux 	= { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
+		.gpiomute 	= 0xff3ffc,
 		.no_msp34xx	= 1,
 		.tuner_type	= -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -1054,7 +1083,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= -1,
 		.gpiomask	= 3,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 1, 1, 0, 2, 3 },
+		.gpiomux 	= { 1, 1, 0, 2 },
+		.gpiomute 	= 3,
 		.no_msp34xx	= 1,
 		.pll		= PLL_NONE,
 		.tuner_type	= -1,
@@ -1069,7 +1099,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 3,
 		.gpiomask	= 0,
 		.muxsel		= { 2, 3, 1, 0, 0 },
-		.audiomux	= { 0 },
+		.gpiomux 	= { 0 },
 		.no_msp34xx	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -1084,7 +1114,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0xbcf03f,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f },
+		.gpiomux 	= { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
+		.gpiomute 	= 0xbcb03f,
 		.no_msp34xx	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= 21,
@@ -1099,7 +1130,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x70000,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
+		.gpiomux 	= { 0x20000, 0x30000, 0x10000, 0 },
+		.gpiomute 	= 0x40000,
 		.needs_tvaudio	= 1,
 		.no_msp34xx	= 1,
 		.pll		= PLL_35,
@@ -1118,7 +1150,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 15,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= {2,0,0,0,1 },
+		.gpiomux 	= {2,0,0,0 },
+		.gpiomute 	= 1,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= -1,
@@ -1133,7 +1166,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x010f00,
 		.muxsel		= {2, 3, 0, 0 },
-		.audiomux	= {0x10000, 0, 0x10000, 0, 0, 0 },
+		.gpiomux 	= {0x10000, 0, 0x10000, 0 },
 		.no_msp34xx	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_ALPS_TSHC6_NTSC,
@@ -1150,7 +1183,8 @@ struct tvcard bttv_tvcards[] = {
 		.gpiomask	= 0xAA0000,
 		.muxsel		= { 2,3,1,1,-1 },
 		.digital_mode   = DIGITAL_MODE_CAMERA,
-		.audiomux	= { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000  },
+		.gpiomux 	= { 0x20000, 0, 0x80000, 0x80000 },
+		.gpiomute 	= 0xa8000,
 		.no_msp34xx	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL_I,
@@ -1175,7 +1209,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 7,
 		.muxsel         = { 2, 0, 1, 1 },
-		.audiomux       = { 0, 1, 2, 3, 4 },
+		.gpiomux        = { 0, 1, 2, 3 },
+		.gpiomute 	= 4,
 		.pll            = PLL_28,
 		.tuner_type     = -1 /* TUNER_ALPS_TMDH2_NTSC */,
 		.tuner_addr	= ADDR_UNSET,
@@ -1192,7 +1227,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 3,
 		.gpiomask       = 0x03000F,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 1, 0xd0001, 0, 0, 10 },
+		.gpiomux 	= { 1, 0xd0001, 0, 0 },
+		.gpiomute 	= 10,
 				/* sound path (5 sources):
 				MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
 					0= ext. Audio IN
@@ -1218,7 +1254,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x1c,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0, 0, 0x10, 8, 4 },
+		.gpiomux 	= { 0, 0, 0x10, 8 },
+		.gpiomute 	= 4,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
@@ -1230,7 +1267,7 @@ struct tvcard bttv_tvcards[] = {
 		/* Tim R�stermundt <rosterm@uni-muenster.de>
 		in de.comp.os.unix.linux.hardware:
 			options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
-			audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
+			gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
 			options tuner type=5 */
 		.name		= "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
 		.video_inputs	= 4,
@@ -1239,7 +1276,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x18e0,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
+		.gpiomux 	= { 0x0000,0x0800,0x1000,0x1000 },
+		.gpiomute 	= 0x18e0,
 			/* For cards with tda9820/tda9821:
 				0x0000: Tuner normal stereo
 				0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
@@ -1259,7 +1297,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0xF,
 		.muxsel         = { 2, 3, 1, 0 },
-		.audiomux       = { 2, 0, 0, 0, 10 },
+		.gpiomux        = { 2, 0, 0, 0 },
+		.gpiomute 	= 10,
 		.needs_tvaudio  = 0,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_TEMIC_PAL,
@@ -1277,7 +1316,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x1800,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
+		.gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
+		.gpiomute 	= 0x1800,
 		.pll            = PLL_28,
 		.tuner_type     = 5,
 		.tuner_addr	= ADDR_UNSET,
@@ -1294,7 +1334,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 1,
 		.gpiomask       = 0,
 		.muxsel         = { 3, 1 },
-		.audiomux       = { 0 },
+		.gpiomux        = { 0 },
 		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_35,
@@ -1311,7 +1351,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0xe00,
 		.muxsel         = { 2, 3, 1, 1},
-		.audiomux       = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
+		.gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
+		.gpiomute 	= 0x800,
 		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
@@ -1327,7 +1368,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask       = 0x03000F,
 		.muxsel		= { 2, 3, 1, 0 },
-		.audiomux       = { 2, 0, 0, 0, 1 },
+		.gpiomux        = { 2, 0, 0, 0 },
+		.gpiomute 	= 1,
 		.pll            = PLL_28,
 		.tuner_type	= 0,
 		.tuner_addr	= ADDR_UNSET,
@@ -1344,7 +1386,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= -1,
 		.gpiomask       = 11,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 2, 0, 0, 1, 8 },
+		.gpiomux        = { 2, 0, 0, 1 },
+		.gpiomute 	= 8,
 		.pll            = PLL_35,
 		.tuner_type     = TUNER_TEMIC_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -1359,7 +1402,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 1,
 		.gpiomask       = 0xF,
 		.muxsel		= { 2, 2 },
-		.audiomux       = { },
+		.gpiomux        = { },
 		.no_msp34xx     = 1,
 		.needs_tvaudio  = 0,
 		.pll		= PLL_28,
@@ -1378,7 +1421,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0xFF,
 		.muxsel         = { 2, 3, 1, 0 },
-		.audiomux       = { 1, 0, 4, 4, 9 },
+		.gpiomux        = { 1, 0, 4, 4 },
+		.gpiomute 	= 9,
 		.needs_tvaudio  = 0,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
@@ -1394,7 +1438,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0xf03f,
 		.muxsel		= { 2, 3, 1, 0 },
-		.audiomux	= { 0xbffe, 0, 0xbfff, 0, 0xbffe },
+		.gpiomux 	= { 0xbffe, 0, 0xbfff, 0 },
+		.gpiomute 	= 0xbffe,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_TEMIC_4006FN5_MULTI_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -1411,7 +1456,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= -1,
 		.gpiomask	= 1,
 		.muxsel		= { 2, 3, 0, 1 },
-		.audiomux	= { 0, 0, 1, 0, 0 },
+		.gpiomux 	= { 0, 0, 1, 0 },
 		.no_msp34xx	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_TEMIC_4006FN5_MULTI_PAL,
@@ -1430,7 +1475,8 @@ struct tvcard bttv_tvcards[] = {
 				/* Radio changed from 1e80 to 0x800 to make
 				FlyVideo2000S in .hu happy (gm)*/
 				/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
-		.audiomux	= { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
+		.gpiomux 	= { 0x0000,0x0800,0x1000,0x1000 },
+		.gpiomute 	= 0x1800,
 		.audio_hook	= fv2000s_audio,
 		.no_msp34xx	= 1,
 		.no_tda9875	= 1,
@@ -1448,7 +1494,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0xffff00,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0x500, 0x500, 0x300, 0x900, 0x900 },
+		.gpiomux 	= { 0x500, 0x500, 0x300, 0x900 },
+		.gpiomute 	= 0x900,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
@@ -1465,7 +1512,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x010f00,
 		.muxsel         = {2, 3, 0, 0 },
-		.audiomux       = {0x10000, 0, 0x10000, 0, 0, 0 },
+		.gpiomux        = {0x10000, 0, 0x10000, 0 },
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
@@ -1486,7 +1533,8 @@ struct tvcard bttv_tvcards[] = {
 		.gpiomask       = 0x4f8a00,
 		/* 0x100000: 1=MSP enabled (0=disable again)
 		* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
-		.audiomux       = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
+		.gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
+		.gpiomute 	= 0x947fff,
 		/* tvtuner, radio,   external,internal, mute,  stereo
 		* tuner, Composit, SVid, Composit-on-Svid-adapter */
 		.muxsel         = { 2, 3 ,0 ,1 },
@@ -1518,7 +1566,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 15,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 0, 0, 11, 7, 13, 0 }, /* TV and Radio with same GPIO ! */
+		.gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
+		.gpiomute 	= 13,
 		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = 25,
@@ -1557,7 +1606,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x3f,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
+		.gpiomux 	= { 0x01, 0x00, 0x03, 0x03 },
+		.gpiomute 	= 0x09,
 		.needs_tvaudio  = 1,
 		.no_msp34xx	= 1,
 		.no_tda9875	= 1,
@@ -1586,7 +1636,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 4,
 		.gpiomask       = 0,
 		.muxsel         = { 2, 3, 1, 0, 0 },
-		.audiomux       = { 0 },
+		.gpiomux        = { 0 },
 		.needs_tvaudio  = 0,
 		.tuner_type     = -1,
 		.tuner_addr	= ADDR_UNSET,
@@ -1618,7 +1668,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
 		.muxsel         = { 2, 1, 1, },
-		.audiomux       = { 0, 1, 2, 2, 4 },
+		.gpiomux        = { 0, 1, 2, 2 },
+		.gpiomute 	= 4,
 		.needs_tvaudio  = 0,
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -1637,7 +1688,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x140007,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 0, 1, 2, 3, 4, 0 },
+		.gpiomux        = { 0, 1, 2, 3 },
+		.gpiomute 	= 4,
 		.tuner_type     = TUNER_PHILIPS_NTSC,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -1651,7 +1703,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = -1,
 		.gpiomask       = 0,
 		.muxsel         = { 2, 3, 1, 0 },
-		.audiomux       = { 0 },
+		.gpiomux        = { 0 },
 		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
@@ -1667,13 +1719,14 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 7,
 		.muxsel         = { 2, 3, 1, 1 },   /* Tuner, SVid, SVHS, SVid to SVHS connector */
-		.audiomux       = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
+		.gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
 						* This card lacks external Audio In, so we mute it on Ext. & Int.
 						* The PCB can take a sbx1637/sbx1673, wiring unknown.
 						* This card lacks PCI subsystem ID, sigh.
-						* audiomux=1: lower volume, 2+3: mute
+						* gpiomux =1: lower volume, 2+3: mute
 						* btwincap uses 0x80000/0x80003
 						*/
+		.gpiomute 	= 4,
 		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
@@ -1720,7 +1773,7 @@ struct tvcard bttv_tvcards[] = {
 		.radio_addr     = ADDR_UNSET,
 
 		.gpiomask       = 7,
-		.audiomux       = {7},
+		.gpiomux        = {7},
 	},
 	[BTTV_BOARD_GVBCTV5PCI] = {
 		.name           = "IODATA GV-BCTV5/PCI",
@@ -1730,7 +1783,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x0f0f80,
 		.muxsel         = {2, 3, 1, 0 },
-		.audiomux       = {0x030000, 0x010000, 0, 0, 0x020000, 0},
+		.gpiomux        = {0x030000, 0x010000, 0, 0 },
+		.gpiomute 	= 0x020000,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_NTSC_M,
@@ -1960,7 +2014,7 @@ struct tvcard bttv_tvcards[] = {
 		.gpiomask       = 2,
 		/* TV, Comp1, Composite over SVID con, SVID */
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 2, 2, 0, 0, 0 },
+		.gpiomux        = { 2, 2, 0, 0 },
 		.pll            = PLL_28,
 		.has_radio      = 1,
 		.tuner_type     = TUNER_PHILIPS_PAL,
@@ -1984,7 +2038,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = -1,
 		.gpiomask       = 7,
 		.muxsel         = { 2, 3, 1, 1},
-		.audiomux       = { 0, 1, 2, 3, 4},
+		.gpiomux        = { 0, 1, 2, 3},
+		.gpiomute 	= 4,
 		.needs_tvaudio  = 1,
 		.tuner_type     = 5,
 		.tuner_addr	= ADDR_UNSET,
@@ -2016,7 +2071,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = -1,
 		.gpiomask       = 0,
 		.muxsel         = { 2, 3 },
-		.audiomux       = { 0 },
+		.gpiomux        = { 0 },
 		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
@@ -2035,7 +2090,8 @@ struct tvcard bttv_tvcards[] = {
 		.gpiomask       = 0x001e8007,
 		.muxsel         = { 2, 3, 1, 0 },
 		/*                  Tuner, Radio, external, internal, off,  on */
-		.audiomux       = { 0x08,  0x0f,  0x0a,     0x08,     0x0f, 0x08 },
+		.gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
+		.gpiomute 	= 0x0f,
 		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
@@ -2152,7 +2208,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = -1,
 		.gpiomask       = 0,
 		.muxsel         = { 2, 3, 1, 0 },
-		.audiomux       = { 0 },
+		.gpiomux        = { 0 },
 		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
@@ -2169,7 +2225,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 3,
 		.gpiomask       = 0x00,
 		.muxsel         = { 2, 3, 1, 0 },
-		.audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
+		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
 		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = -1,
@@ -2184,7 +2240,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 3,
 		.gpiomask       = 0x00,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
+		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
 		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = -1,
@@ -2204,7 +2260,7 @@ struct tvcard bttv_tvcards[] = {
 					via the upper nibble of muxsel. here: used for
 					xternal video-mux */
 		.muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
-		.audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
+		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
 		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = -1,
@@ -2222,7 +2278,7 @@ struct tvcard bttv_tvcards[] = {
 					via the upper nibble of muxsel. here: used for
 					xternal video-mux */
 		.muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
-		.audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
+		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
 		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = -1,
@@ -2310,7 +2366,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 3,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 1, 1, 1, 1, 0 },
+		.gpiomux        = { 1, 1, 1, 1 },
 		.needs_tvaudio  = 1,
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -2341,7 +2397,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x008007,
 		.muxsel         = { 2, 3, 0, 0 },
-		.audiomux       = { 0, 0, 0, 0, 0x000003, 0 },
+		.gpiomux        = { 0, 0, 0, 0 },
+		.gpiomute 	= 0x000003,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -2377,7 +2434,7 @@ struct tvcard bttv_tvcards[] = {
 		.needs_tvaudio  = 0,
 		.gpiomask       = 0x68,
 		.muxsel         = { 2, 3, 1 },
-		.audiomux       = { 0x68, 0x68, 0x61, 0x61, 0x00 },
+		.gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
 		.pll            = PLL_28,
 	},
 
@@ -2392,7 +2449,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x008007,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 0, 1, 2, 2, 3 },
+		.gpiomux        = { 0, 1, 2, 2 },
+		.gpiomute 	= 3,
 		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_PAL,
@@ -2417,7 +2475,7 @@ struct tvcard bttv_tvcards[] = {
 		.no_tda9875     = 1,
 		.no_tda7432     = 1,
 		.muxsel         = {2,2,2,2},/*878A input is always MUX0, see above.*/
-		.audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
+		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
 		.pll            = PLL_28,
 		.needs_tvaudio  = 0,
 		.muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
@@ -2435,7 +2493,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x0000000f,
 		.muxsel         = { 2, 1, 1 },
-		.audiomux       = { 0x02, 0x00, 0x00, 0x00, 0x00 },
+		.gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
 		.tuner_type     = TUNER_TEMIC_PAL,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -2491,7 +2549,7 @@ struct tvcard bttv_tvcards[] = {
 		.muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
 				3, 3, 3, 3, 3, 3, 3, 3 },
 		.muxsel_hook      = sigmaSQ_muxsel,
-		.audiomux         = { 0 },
+		.gpiomux          = { 0 },
 		.no_msp34xx       = 1,
 		.pll              = PLL_28,
 		.tuner_type       = -1,
@@ -2508,7 +2566,7 @@ struct tvcard bttv_tvcards[] = {
 		.gpiomask         = 0x0,
 		.muxsel           = { 2, 2, 2, 2 },
 		.muxsel_hook      = sigmaSLC_muxsel,
-		.audiomux         = { 0 },
+		.gpiomux          = { 0 },
 		.no_msp34xx       = 1,
 		.pll              = PLL_28,
 		.tuner_type       = -1,
@@ -2526,7 +2584,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = -1,
 		.gpiomask       = 0xFF,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 2, 0, 0, 0, 10 },
+		.gpiomux        = { 2, 0, 0, 0 },
+		.gpiomute 	= 10,
 		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_PAL,
@@ -2560,7 +2619,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x3f,
 		.muxsel         = {2, 3, 1, 0 },
-		.audiomux       = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31 },
+		.gpiomux        = {0x31, 0x31, 0x31, 0x31 },
+		.gpiomute 	= 0x31,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_NTSC_M,
@@ -2583,7 +2643,7 @@ struct tvcard bttv_tvcards[] = {
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
 		.gpiomask       = 0x008007,
-		.audiomux       = { 0, 0x000001,0,0, 0 },
+		.gpiomux        = { 0, 0x000001,0,0 },
 		.needs_tvaudio  = 1,
 		.has_radio      = 1,
 	},
@@ -2693,7 +2753,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.muxsel		= { 2, 3, 1 },
 		.gpiomask       = 0x00e00007,
-		.audiomux       = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 },
+		.gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
+		.gpiomute 	= 0x00c00007,
 		.no_msp34xx     = 1,
 		.no_tda9875     = 1,
 		.no_tda7432     = 1,
@@ -2709,7 +2770,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x01fe00,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux       = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
+		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
+		.gpiomute 	= 0x002000,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_YMEC_TVF66T5_B_DFF,
@@ -2726,7 +2788,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x001c0007,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 0, 1, 2, 2, 3 },
+		.gpiomux        = { 0, 1, 2, 2 },
+		.gpiomute 	= 3,
 		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_TENA_9533_DI,
@@ -2745,7 +2808,8 @@ struct tvcard bttv_tvcards[] = {
 		.gpiomask      = 0x01fe00,
 		.muxsel        = { 2,3,1,1,-1 },
 		.digital_mode  = DIGITAL_MODE_CAMERA,
-		.audiomux      = { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000  },
+		.gpiomux       = { 0x00400, 0x10400, 0x04400, 0x80000 },
+		.gpiomute      = 0x12400,
 		.no_msp34xx    = 1,
 		.pll           = PLL_28,
 		.tuner_type    = TUNER_LG_PAL_FM,
@@ -2763,7 +2827,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 0x3f,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
+		.gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
+		.gpiomute 	= 0x29,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_YMEC_TVF_5533MF,
@@ -2797,7 +2862,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 15,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 2, 0, 0, 0, 1 },
+		.gpiomux 	= { 2, 0, 0, 0 },
+		.gpiomute 	= 1,
 		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= 2,
@@ -2813,7 +2879,7 @@ struct tvcard bttv_tvcards[] = {
 		.svhs		= 2,
 		.gpiomask	= 0x108007,
 		.muxsel		= { 2, 3, 1, 1 },
-		.audiomux	= { 100000, 100002, 100002, 100000 },
+		.gpiomux 	= { 100000, 100002, 100002, 100000 },
 		.no_msp34xx	= 1,
 		.no_tda9875     = 1,
 		.no_tda7432     = 1,
@@ -2853,7 +2919,8 @@ struct tvcard bttv_tvcards[] = {
 		.svhs           = 2,
 		.gpiomask       = 7,
 		.muxsel         = { 2, 3, 1, 1 },
-		.audiomux       = { 0, 1, 2, 3, 4 },
+		.gpiomux        = { 0, 1, 2, 3 },
+		.gpiomute 	= 4,
 		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -2925,20 +2992,20 @@ void __devinit bttv_idcard(struct bttv *btv)
 	if (UNSET != audiomux[0]) {
 		gpiobits = 0;
 		for (i = 0; i < 5; i++) {
-			bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
+			bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
 			gpiobits |= audiomux[i];
 		}
 	} else {
 		gpiobits = audioall;
 		for (i = 0; i < 5; i++) {
-			bttv_tvcards[btv->c.type].audiomux[i] = audioall;
+			bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
 		}
 	}
 	bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
 	printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
 	       btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
 	for (i = 0; i < 5; i++) {
-		printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
+		printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
 	}
 	printk("\n");
 }
@@ -3046,7 +3113,7 @@ static void miro_pinnacle_gpio(struct bttv *btv)
 	gpio_inout(0xffffff, 0);
 	gpio = gpio_read();
 	id   = ((gpio>>10) & 63) -1;
-	msp  = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
+	msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
 	if (id < 32) {
 		btv->tuner_type = miro_tunermap[id];
 		if (0 == (gpio & 0x20)) {
@@ -3442,8 +3509,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
 
 	if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
 		/* detect Bt832 chip for quartzsight digital camera */
-		if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
-		    (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
+		if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
+		    (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
 			boot_bt832(btv);
 	}
 
@@ -3452,19 +3519,19 @@ void __devinit bttv_init_card2(struct bttv *btv)
 
 	/* try to detect audio/fader chips */
 	if (!bttv_tvcards[btv->c.type].no_msp34xx &&
-	    bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
 		request_module("msp3400");
 
 	if (bttv_tvcards[btv->c.type].msp34xx_alt &&
-	    bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
 		request_module("msp3400");
 
 	if (!bttv_tvcards[btv->c.type].no_tda9875 &&
-	    bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
 		request_module("tda9875");
 
 	if (!bttv_tvcards[btv->c.type].no_tda7432 &&
-	    bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
 		request_module("tda7432");
 
 	if (bttv_tvcards[btv->c.type].needs_tvaudio)
@@ -3475,7 +3542,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	if (btv->tda9887_conf)
 		tda9887 = 1;
 	if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
-	    bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
+	    bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0)
 		tda9887 = 1;
 	/* Hybrid DVB card, DOES have a tda9887 */
 	if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
@@ -3796,18 +3863,18 @@ void bttv_tda9880_setnorm(struct bttv *btv, int norm)
 {
 	/* fix up our card entry */
 	if(norm==VIDEO_MODE_NTSC) {
-		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x957fff;
-		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x957fff;
+		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
+		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
 		dprintk("bttv_tda9880_setnorm to NTSC\n");
 	}
 	else {
-		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x947fff;
-		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x947fff;
+		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
+		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
 		dprintk("bttv_tda9880_setnorm to PAL\n");
 	}
 	/* set GPIO according */
 	gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
-		  bttv_tvcards[btv->c.type].audiomux[btv->audio]);
+		  bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
 }
 
 
diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index c0415d6e7fee..74def9c23952 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -36,13 +36,15 @@
 #include <linux/kdev_t.h>
 #include "bttvp.h"
 #include <media/v4l2-common.h>
+#include <media/tvaudio.h>
+#include <media/msp3400.h>
 
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
-#include "rds.h"
+#include <media/rds.h>
 
 
 unsigned int bttv_num;			/* number of Bt848s in use */
@@ -926,45 +928,98 @@ video_mux(struct bttv *btv, unsigned int input)
 
 static char *audio_modes[] = {
 	"audio: tuner", "audio: radio", "audio: extern",
-	"audio: intern", "audio: off"
+	"audio: intern", "audio: mute"
 };
 
 static int
-audio_mux(struct bttv *btv, int mode)
+audio_mux(struct bttv *btv, int input, int mute)
 {
-	int val,mux,i2c_mux,signal;
+	int gpio_val, signal;
+	struct v4l2_control ctrl;
+	struct i2c_client *c;
 
 	gpio_inout(bttv_tvcards[btv->c.type].gpiomask,
 		   bttv_tvcards[btv->c.type].gpiomask);
 	signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC;
 
-	switch (mode) {
-	case AUDIO_MUTE:
-		btv->audio |= AUDIO_MUTE;
-		break;
-	case AUDIO_UNMUTE:
-		btv->audio &= ~AUDIO_MUTE;
-		break;
-	case AUDIO_TUNER:
-	case AUDIO_RADIO:
-	case AUDIO_EXTERN:
-	case AUDIO_INTERN:
-		btv->audio &= AUDIO_MUTE;
-		btv->audio |= mode;
-	}
-	i2c_mux = mux = (btv->audio & AUDIO_MUTE) ? AUDIO_OFF : btv->audio;
-	if (btv->opt_automute && !signal && !btv->radio_user)
-		mux = AUDIO_OFF;
-
-	val = bttv_tvcards[btv->c.type].audiomux[mux];
-	gpio_bits(bttv_tvcards[btv->c.type].gpiomask,val);
+	btv->mute = mute;
+	btv->audio = input;
+
+	/* automute */
+	mute = mute || (btv->opt_automute && !signal && !btv->radio_user);
+
+	if (mute)
+		gpio_val = bttv_tvcards[btv->c.type].gpiomute;
+	else
+		gpio_val = bttv_tvcards[btv->c.type].gpiomux[input];
+
+	gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val);
 	if (bttv_gpio)
-		bttv_gpio_tracking(btv,audio_modes[mux]);
-	if (!in_interrupt())
-		bttv_call_i2c_clients(btv,AUDC_SET_INPUT,&(i2c_mux));
+		bttv_gpio_tracking(btv, audio_modes[mute ? 4 : input]);
+	if (in_interrupt())
+		return 0;
+
+	ctrl.id = V4L2_CID_AUDIO_MUTE;
+	ctrl.value = btv->mute;
+	bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl);
+	c = btv->i2c_msp34xx_client;
+	if (c) {
+		struct v4l2_routing route;
+
+		/* Note: the inputs tuner/radio/extern/intern are translated
+		   to msp routings. This assumes common behavior for all msp3400
+		   based TV cards. When this assumption fails, then the
+		   specific MSP routing must be added to the card table.
+		   For now this is sufficient. */
+		switch (input) {
+		case TVAUDIO_INPUT_RADIO:
+			route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1,
+				    MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART);
+			break;
+		case TVAUDIO_INPUT_EXTERN:
+			route.input = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1,
+				    MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART);
+			break;
+		case TVAUDIO_INPUT_INTERN:
+			/* Yes, this is the same input as for RADIO. I doubt
+			   if this is ever used. The only board with an INTERN
+			   input is the BTTV_BOARD_AVERMEDIA98. I wonder how
+			   that was tested. My guess is that the whole INTERN
+			   input does not work. */
+			route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1,
+				    MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART);
+			break;
+		case TVAUDIO_INPUT_TUNER:
+		default:
+			route.input = MSP_INPUT_DEFAULT;
+			break;
+		}
+		route.output = MSP_OUTPUT_DEFAULT;
+		c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+	}
+	c = btv->i2c_tvaudio_client;
+	if (c) {
+		struct v4l2_routing route;
+
+		route.input = input;
+		route.output = 0;
+		c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+	}
 	return 0;
 }
 
+static inline int
+audio_mute(struct bttv *btv, int mute)
+{
+	return audio_mux(btv, btv->audio, mute);
+}
+
+static inline int
+audio_input(struct bttv *btv, int input)
+{
+	return audio_mux(btv, input, btv->mute);
+}
+
 static void
 i2c_vidiocschan(struct bttv *btv)
 {
@@ -1023,8 +1078,8 @@ set_input(struct bttv *btv, unsigned int input)
 	} else {
 		video_mux(btv,input);
 	}
-	audio_mux(btv,(input == bttv_tvcards[btv->c.type].tuner ?
-		       AUDIO_TUNER : AUDIO_EXTERN));
+	audio_input(btv,(input == bttv_tvcards[btv->c.type].tuner ?
+		       TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN));
 	set_tvnorm(btv,btv->tvnorm);
 	i2c_vidiocschan(btv);
 }
@@ -1236,10 +1291,10 @@ static int set_control(struct bttv *btv, struct v4l2_control *c)
 	case V4L2_CID_AUDIO_MUTE:
 		if (c->value) {
 			va.flags |= VIDEO_AUDIO_MUTE;
-			audio_mux(btv, AUDIO_MUTE);
+			audio_mute(btv, 1);
 		} else {
 			va.flags &= ~VIDEO_AUDIO_MUTE;
-			audio_mux(btv, AUDIO_UNMUTE);
+			audio_mute(btv, 0);
 		}
 		break;
 
@@ -1397,7 +1452,7 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh,
 		free_btres(btv,fh,RESOURCE_OVERLAY);
 	if (NULL != old) {
 		dprintk("switch_overlay: old=%p state is %d\n",old,old->vb.state);
-		bttv_dma_free(btv, old);
+		bttv_dma_free(&fh->cap,btv, old);
 		kfree(old);
 	}
 	dprintk("switch_overlay: done\n");
@@ -1407,7 +1462,8 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh,
 /* ----------------------------------------------------------------------- */
 /* video4linux (1) interface                                               */
 
-static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf,
+static int bttv_prepare_buffer(struct videobuf_queue *q,struct bttv *btv,
+			       struct bttv_buffer *buf,
 			       const struct bttv_format *fmt,
 			       unsigned int width, unsigned int height,
 			       enum v4l2_field field)
@@ -1450,7 +1506,7 @@ static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf,
 	/* alloc risc memory */
 	if (STATE_NEEDS_INIT == buf->vb.state) {
 		redo_dma_risc = 1;
-		if (0 != (rc = videobuf_iolock(btv->c.pci,&buf->vb,&btv->fbuf)))
+		if (0 != (rc = videobuf_iolock(q,&buf->vb,&btv->fbuf)))
 			goto fail;
 	}
 
@@ -1462,7 +1518,7 @@ static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf,
 	return 0;
 
  fail:
-	bttv_dma_free(btv,buf);
+	bttv_dma_free(q,btv,buf);
 	return rc;
 }
 
@@ -1486,7 +1542,7 @@ buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
 	struct bttv_fh *fh = q->priv_data;
 
-	return bttv_prepare_buffer(fh->btv, buf, fh->fmt,
+	return bttv_prepare_buffer(q,fh->btv, buf, fh->fmt,
 				   fh->width, fh->height, field);
 }
 
@@ -1510,7 +1566,7 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 	struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
 	struct bttv_fh *fh = q->priv_data;
 
-	bttv_dma_free(fh->btv,buf);
+	bttv_dma_free(&fh->cap,fh->btv,buf);
 }
 
 static struct videobuf_queue_ops bttv_video_qops = {
@@ -1653,7 +1709,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
 			return -EINVAL;
 
 		mutex_lock(&btv->lock);
-		audio_mux(btv, (v->flags&VIDEO_AUDIO_MUTE) ? AUDIO_MUTE : AUDIO_UNMUTE);
+		audio_mute(btv, (v->flags&VIDEO_AUDIO_MUTE) ? 1 : 0);
 		bttv_call_i2c_clients(btv,cmd,v);
 
 		/* card specific hooks */
@@ -1822,7 +1878,8 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
 			bttv_call_i2c_clients(btv, VIDIOCGAUDIO, &va);
 			if (t->audmode == V4L2_TUNER_MODE_MONO)
 				va.mode = VIDEO_SOUND_MONO;
-			else if (t->audmode == V4L2_TUNER_MODE_STEREO)
+			else if (t->audmode == V4L2_TUNER_MODE_STEREO ||
+				 t->audmode == V4L2_TUNER_MODE_LANG1_LANG2)
 				va.mode = VIDEO_SOUND_STEREO;
 			else if (t->audmode == V4L2_TUNER_MODE_LANG1)
 				va.mode = VIDEO_SOUND_LANG1;
@@ -2496,7 +2553,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
 		field = (vm->height > bttv_tvnorms[btv->tvnorm].sheight/2)
 			? V4L2_FIELD_INTERLACED
 			: V4L2_FIELD_BOTTOM;
-		retval = bttv_prepare_buffer(btv,buf,
+		retval = bttv_prepare_buffer(&fh->cap,btv,buf,
 					     format_by_palette(vm->format),
 					     vm->width,vm->height,field);
 		if (0 != retval)
@@ -2528,8 +2585,8 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
 			retval = -EIO;
 			/* fall through */
 		case STATE_DONE:
-			videobuf_dma_pci_sync(btv->c.pci,&buf->vb.dma);
-			bttv_dma_free(btv,buf);
+			videobuf_dma_sync(&fh->cap,&buf->vb.dma);
+			bttv_dma_free(&fh->cap,btv,buf);
 			break;
 		default:
 			retval = -EINVAL;
@@ -3162,8 +3219,8 @@ static int radio_open(struct inode *inode, struct file *file)
 
 	file->private_data = btv;
 
-	bttv_call_i2c_clients(btv,AUDC_SET_RADIO,&btv->tuner_type);
-	audio_mux(btv,AUDIO_RADIO);
+	bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL);
+	audio_input(btv,TVAUDIO_INPUT_RADIO);
 
 	mutex_unlock(&btv->lock);
 	return 0;
@@ -3749,7 +3806,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs)
 			bttv_irq_switch_video(btv);
 
 		if ((astat & BT848_INT_HLOCK)  &&  btv->opt_automute)
-			audio_mux(btv, -1);
+			audio_mute(btv, btv->mute);  /* trigger automute */
 
 		if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) {
 			printk(KERN_INFO "bttv%d: %s%s @ %08x,",btv->c.nr,
@@ -4050,7 +4107,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 		bt848_contrast(btv,32768);
 		bt848_hue(btv,32768);
 		bt848_sat(btv,32768);
-		audio_mux(btv,AUDIO_MUTE);
+		audio_mute(btv, 1);
 		set_input(btv,0);
 	}
 
diff --git a/drivers/media/video/bttv-gpio.c b/drivers/media/video/bt8xx/bttv-gpio.c
index c4d5e2b70c28..c4d5e2b70c28 100644
--- a/drivers/media/video/bttv-gpio.c
+++ b/drivers/media/video/bt8xx/bttv-gpio.c
diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index 614c12018557..4b562b386fcf 100644
--- a/drivers/media/video/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -302,6 +302,10 @@ static int attach_inform(struct i2c_client *client)
 	if (!client->driver->command)
 		return 0;
 
+	if (client->driver->id == I2C_DRIVERID_MSP3400)
+		btv->i2c_msp34xx_client = client;
+	if (client->driver->id == I2C_DRIVERID_TVAUDIO)
+		btv->i2c_tvaudio_client = client;
 	if (btv->tuner_type != UNSET) {
 		struct tuner_setup tun_setup;
 
diff --git a/drivers/media/video/bttv-if.c b/drivers/media/video/bt8xx/bttv-if.c
index 19b564ab0e92..19b564ab0e92 100644
--- a/drivers/media/video/bttv-if.c
+++ b/drivers/media/video/bt8xx/bttv-if.c
diff --git a/drivers/media/video/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 69efa0e5174d..69efa0e5174d 100644
--- a/drivers/media/video/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
diff --git a/drivers/media/video/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 344f84e9af04..16323a5d68ac 100644
--- a/drivers/media/video/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -509,11 +509,11 @@ bttv_risc_hook(struct bttv *btv, int slot, struct btcx_riscmem *risc,
 }
 
 void
-bttv_dma_free(struct bttv *btv, struct bttv_buffer *buf)
+bttv_dma_free(struct videobuf_queue *q,struct bttv *btv, struct bttv_buffer *buf)
 {
 	BUG_ON(in_interrupt());
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_pci_unmap(btv->c.pci, &buf->vb.dma);
+	videobuf_dma_unmap(q, &buf->vb.dma);
 	videobuf_dma_free(&buf->vb.dma);
 	btcx_riscmem_free(btv->c.pci,&buf->bottom);
 	btcx_riscmem_free(btv->c.pci,&buf->top);
diff --git a/drivers/media/video/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c
index 72afdd64b882..e20ff238e409 100644
--- a/drivers/media/video/bttv-vbi.c
+++ b/drivers/media/video/bt8xx/bttv-vbi.c
@@ -96,7 +96,7 @@ static int vbi_buffer_prepare(struct videobuf_queue *q,
 		return -EINVAL;
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
-		if (0 != (rc = videobuf_iolock(btv->c.pci, &buf->vb, NULL)))
+		if (0 != (rc = videobuf_iolock(q, &buf->vb, NULL)))
 			goto fail;
 		if (0 != (rc = vbi_buffer_risc(btv,buf,fh->lines)))
 			goto fail;
@@ -109,7 +109,7 @@ static int vbi_buffer_prepare(struct videobuf_queue *q,
 	return 0;
 
  fail:
-	bttv_dma_free(btv,buf);
+	bttv_dma_free(q,btv,buf);
 	return rc;
 }
 
@@ -136,7 +136,7 @@ static void vbi_buffer_release(struct videobuf_queue *q, struct videobuf_buffer
 	struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
 
 	dprintk("free %p\n",vb);
-	bttv_dma_free(fh->btv,buf);
+	bttv_dma_free(&fh->cap,fh->btv,buf);
 }
 
 struct videobuf_queue_ops bttv_vbi_qops = {
diff --git a/drivers/media/video/bttv.h b/drivers/media/video/bt8xx/bttv.h
index 9908c8e0c951..3a23265c1538 100644
--- a/drivers/media/video/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <media/ir-common.h>
 #include <media/ir-kbd-i2c.h>
+#include <media/i2c-addr.h>
 
 /* ---------------------------------------------------------- */
 /* exported by bttv-cards.c                                   */
@@ -168,25 +169,6 @@
 #define BTTV_BOARD_HAUPPAUGE_IMPACTVCB     0x8f
 #define BTTV_BOARD_MACHTV_MAGICTV          0x90
 
-/* i2c address list */
-#define I2C_TSA5522        0xc2
-#define I2C_TDA7432        0x8a
-#define I2C_BT832_ALT1	   0x88
-#define I2C_BT832_ALT2	   0x8a // alternate setting
-#define I2C_TDA8425        0x82
-#define I2C_TDA9840        0x84
-#define I2C_TDA9850        0xb6 /* also used by 9855,9873 */
-#define I2C_TDA9874        0xb0 /* also used by 9875 */
-#define I2C_TDA9875        0xb0
-#define I2C_HAUPEE         0xa0
-#define I2C_STBEE          0xae
-#define I2C_VHX            0xc0
-#define I2C_MSP3400        0x80
-#define I2C_MSP3400_ALT    0x88
-#define I2C_TEA6300        0x80 /* also used by 6320 */
-#define I2C_DPL3518	   0x84
-#define I2C_TDA9887	   0x86
-
 /* more card-specific defines */
 #define PT2254_L_CHANNEL 0x10
 #define PT2254_R_CHANNEL 0x08
@@ -252,7 +234,8 @@ struct tvcard
 	unsigned int digital_mode; // DIGITAL_MODE_CAMERA or DIGITAL_MODE_VIDEO
 	u32 gpiomask;
 	u32 muxsel[16];
-	u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
+	u32 gpiomux[4];  /* Tuner, Radio, external, internal */
+	u32 gpiomute;    /* GPIO mute setting */
 	u32 gpiomask2;   /* GPIO MUX mask */
 
 	/* i2c audio flags */
diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 9cb72f176f7d..ee989d2e15d9 100644
--- a/drivers/media/video/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -41,7 +41,6 @@
 
 #include <linux/device.h>
 #include <media/video-buf.h>
-#include <media/audiochip.h>
 #include <media/tuner.h>
 #include <media/tveeprom.h>
 #include <media/ir-common.h>
@@ -190,7 +189,8 @@ int bttv_buffer_activate_video(struct bttv *btv,
 			       struct bttv_buffer_set *set);
 int bttv_buffer_activate_vbi(struct bttv *btv,
 			     struct bttv_buffer *vbi);
-void bttv_dma_free(struct bttv *btv, struct bttv_buffer *buf);
+void bttv_dma_free(struct videobuf_queue *q, struct bttv *btv,
+		   struct bttv_buffer *buf);
 
 /* overlay handling */
 int bttv_overlay_risc(struct bttv *btv, struct bttv_overlay *ov,
@@ -298,6 +298,8 @@ struct bttv {
 	int                        i2c_state, i2c_rc;
 	int                        i2c_done;
 	wait_queue_head_t          i2c_queue;
+	struct i2c_client 	  *i2c_msp34xx_client;
+	struct i2c_client 	  *i2c_tvaudio_client;
 
 	/* video4linux (1) */
 	struct video_device *video_dev;
@@ -320,6 +322,7 @@ struct bttv {
 	/* video state */
 	unsigned int input;
 	unsigned int audio;
+	unsigned int mute;
 	unsigned long freq;
 	int tvnorm,hue,contrast,bright,saturation;
 	struct v4l2_framebuffer fbuf;
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index d97b7d8ac33d..cf61c590f4ad 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -150,7 +150,7 @@ static int qc_calibrate(struct qcam_device *q)
 static struct qcam_device *qcam_init(struct parport *port)
 {
 	struct qcam_device *q;
-	
+
 	q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
 	if(q==NULL)
 		return NULL;
@@ -158,16 +158,16 @@ static struct qcam_device *qcam_init(struct parport *port)
 	q->pport = port;
 	q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
 					  NULL, 0, NULL);
-	if (q->pdev == NULL) 
+	if (q->pdev == NULL)
 	{
 		printk(KERN_ERR "bw-qcam: couldn't register for %s.\n",
 		       port->name);
 		kfree(q);
 		return NULL;
 	}
-	
+
 	memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
-	
+
 	mutex_init(&q->lock);
 
 	q->port_mode = (QC_ANY | QC_NOTSET);
@@ -236,12 +236,12 @@ static int qc_waithand(struct qcam_device *q, int val)
 		while (!((status = read_lpstatus(q)) & 8))
 		{
 			/* 1000 is enough spins on the I/O for all normal
-			   cases, at that point we start to poll slowly 
+			   cases, at that point we start to poll slowly
 			   until the camera wakes up. However, we are
 			   busy blocked until the camera responds, so
 			   setting it lower is much better for interactive
 			   response. */
-			   
+
 			if(runs++>maxpoll)
 			{
 				msleep_interruptible(5);
@@ -255,12 +255,12 @@ static int qc_waithand(struct qcam_device *q, int val)
 		while (((status = read_lpstatus(q)) & 8))
 		{
 			/* 1000 is enough spins on the I/O for all normal
-			   cases, at that point we start to poll slowly 
+			   cases, at that point we start to poll slowly
 			   until the camera wakes up. However, we are
 			   busy blocked until the camera responds, so
 			   setting it lower is much better for interactive
 			   response. */
-			   
+
 			if(runs++>maxpoll)
 			{
 				msleep_interruptible(5);
@@ -282,17 +282,17 @@ static unsigned int qc_waithand2(struct qcam_device *q, int val)
 {
 	unsigned int status;
 	int runs=0;
-	
-	do 
+
+	do
 	{
 		status = read_lpdata(q);
 		/* 1000 is enough spins on the I/O for all normal
-		   cases, at that point we start to poll slowly 
+		   cases, at that point we start to poll slowly
 		   until the camera wakes up. However, we are
 		   busy blocked until the camera responds, so
 		   setting it lower is much better for interactive
 		   response. */
-		   
+
 		if(runs++>maxpoll)
 		{
 			msleep_interruptible(5);
@@ -321,7 +321,7 @@ static int qc_detect(struct qcam_device *q)
 
 	lastreg = reg = read_lpstatus(q) & 0xf0;
 
-	for (i = 0; i < 500; i++) 
+	for (i = 0; i < 500; i++)
 	{
 		reg = read_lpstatus(q) & 0xf0;
 		if (reg != lastreg)
@@ -357,7 +357,7 @@ static int qc_detect(struct qcam_device *q)
 
 static void qc_reset(struct qcam_device *q)
 {
-	switch (q->port_mode & QC_FORCE_MASK) 
+	switch (q->port_mode & QC_FORCE_MASK)
 	{
 		case QC_FORCE_UNIDIR:
 			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
@@ -370,7 +370,7 @@ static void qc_reset(struct qcam_device *q)
 		case QC_ANY:
 			write_lpcontrol(q, 0x20);
 			write_lpdata(q, 0x75);
-	
+
 			if (read_lpdata(q) != 0x75) {
 				q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
 			} else {
@@ -398,8 +398,8 @@ static void qc_reset(struct qcam_device *q)
 static int qc_setscanmode(struct qcam_device *q)
 {
 	int old_mode = q->mode;
-	
-	switch (q->transfer_scale) 
+
+	switch (q->transfer_scale)
 	{
 		case 1:
 			q->mode = 0;
@@ -412,7 +412,7 @@ static int qc_setscanmode(struct qcam_device *q)
 			break;
 	}
 
-	switch (q->bpp) 
+	switch (q->bpp)
 	{
 		case 4:
 			break;
@@ -421,7 +421,7 @@ static int qc_setscanmode(struct qcam_device *q)
 			break;
 	}
 
-	switch (q->port_mode & QC_MODE_MASK) 
+	switch (q->port_mode & QC_MODE_MASK)
 	{
 		case QC_BIDIR:
 			q->mode += 1;
@@ -430,10 +430,10 @@ static int qc_setscanmode(struct qcam_device *q)
 		case QC_UNIDIR:
 			break;
 	}
-	
+
 	if (q->mode != old_mode)
 		q->status |= QC_PARAM_CHANGE;
-	
+
 	return 0;
 }
 
@@ -451,7 +451,7 @@ static void qc_set(struct qcam_device *q)
 	/* Set the brightness.  Yes, this is repetitive, but it works.
 	 * Shorter versions seem to fail subtly.  Feel free to try :-). */
 	/* I think the problem was in qc_command, not here -- bls */
-	
+
 	qc_command(q, 0xb);
 	qc_command(q, q->brightness);
 
@@ -502,13 +502,13 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
 	unsigned int hi2, lo2;
 	static int state = 0;
 
-	if (buffer == NULL) 
+	if (buffer == NULL)
 	{
 		state = 0;
 		return 0;
 	}
-	
-	switch (q->port_mode & QC_MODE_MASK) 
+
+	switch (q->port_mode & QC_MODE_MASK)
 	{
 		case QC_BIDIR:		/* Bi-directional Port */
 			write_lpcontrol(q, 0x26);
@@ -517,7 +517,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
 			write_lpcontrol(q, 0x2e);
 			lo2 = (qc_waithand2(q, 0) >> 1);
 			hi2 = (read_lpstatus(q) >> 3) & 0x1f;
-			switch (q->bpp) 
+			switch (q->bpp)
 			{
 				case 4:
 					buffer[0] = lo & 0xf;
@@ -544,7 +544,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
 			write_lpcontrol(q, 0xe);
 			hi = (qc_waithand(q, 0) & 0xf0) >> 4;
 
-			switch (q->bpp) 
+			switch (q->bpp)
 			{
 				case 4:
 					buffer[0] = lo;
@@ -552,7 +552,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
 					ret = 2;
 					break;
 				case 6:
-					switch (state) 
+					switch (state)
 					{
 						case 0:
 							buffer[0] = (lo << 2) | ((hi & 0xc) >> 2);
@@ -604,13 +604,13 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 	int  shift=8-q->bpp;
 	char invert;
 
-	if (q->mode == -1) 
+	if (q->mode == -1)
 		return -ENXIO;
 
 	qc_command(q, 0x7);
 	qc_command(q, q->mode);
 
-	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) 
+	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
 	{
 		write_lpcontrol(q, 0x2e);	/* turn port around */
 		write_lpcontrol(q, 0x26);
@@ -618,7 +618,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 		write_lpcontrol(q, 0x2e);
 		(void) qc_waithand(q, 0);
 	}
-	
+
 	/* strange -- should be 15:63 below, but 4bpp is odd */
 	invert = (q->bpp == 4) ? 16 : 63;
 
@@ -629,15 +629,15 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 	    q->transfer_scale;
 	transperline = (transperline + divisor - 1) / divisor;
 
-	for (i = 0, yield = yieldlines; i < linestotrans; i++) 
+	for (i = 0, yield = yieldlines; i < linestotrans; i++)
 	{
-		for (pixels_read = j = 0; j < transperline; j++) 
+		for (pixels_read = j = 0; j < transperline; j++)
 		{
 			bytes = qc_readbytes(q, buffer);
-			for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) 
+			for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++)
 			{
 				int o;
-				if (buffer[k] == 0 && invert == 16) 
+				if (buffer[k] == 0 && invert == 16)
 				{
 					/* 4bpp is odd (again) -- inverter is 16, not 15, but output
 					   must be 0-15 -- bls */
@@ -653,7 +653,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 			pixels_read += bytes;
 		}
 		(void) qc_readbytes(q, NULL);	/* reset state machine */
-		
+
 		/* Grabbing an entire frame from the quickcam is a lengthy
 		   process. We don't (usually) want to busy-block the
 		   processor for the entire frame. yieldlines is a module
@@ -666,7 +666,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 		}
 	}
 
-	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) 
+	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
 	{
 		write_lpcontrol(q, 2);
 		write_lpcontrol(q, 6);
@@ -687,7 +687,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 {
 	struct video_device *dev = video_devdata(file);
 	struct qcam_device *qcam=(struct qcam_device *)dev;
-	
+
 	switch(cmd)
 	{
 		case VIDIOCGCAP:
@@ -762,7 +762,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 			    	return -EINVAL;
 			if(p->depth!=4 && p->depth!=6)
 				return -EINVAL;
-			
+
 			/*
 			 *	Now load the camera.
 			 */
@@ -790,11 +790,11 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 				return -EINVAL;
 			if(vw->width<80||vw->width>320)
 				return -EINVAL;
-				
+
 			qcam->width = 320;
 			qcam->height = 240;
 			qcam->transfer_scale = 4;
-			
+
 			if(vw->width>=160 && vw->height>=120)
 			{
 				qcam->transfer_scale = 2;
@@ -808,11 +808,11 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 			mutex_lock(&qcam->lock);
 			qc_setscanmode(qcam);
 			mutex_unlock(&qcam->lock);
-			
+
 			/* We must update the camera before we grab. We could
 			   just have changed the grab size */
 			qcam->status |= QC_PARAM_CHANGE;
-			
+
 			/* Ok we figured out what to use from our wide choice */
 			return 0;
 		}
@@ -853,9 +853,9 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 	struct qcam_device *qcam=(struct qcam_device *)v;
 	int len;
 	parport_claim_or_block(qcam->pdev);
-	
+
 	mutex_lock(&qcam->lock);
-	
+
 	qc_reset(qcam);
 
 	/* Update the camera parameters if we need to */
@@ -863,13 +863,13 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 		qc_set(qcam);
 
 	len=qc_capture(qcam, buf,count);
-	
+
 	mutex_unlock(&qcam->lock);
-	
+
 	parport_release(qcam->pdev);
 	return len;
 }
- 
+
 static struct file_operations qcam_fops = {
 	.owner		= THIS_MODULE,
 	.open           = video_exclusive_open,
@@ -905,11 +905,11 @@ static int init_bwqcam(struct parport *port)
 	qcam=qcam_init(port);
 	if(qcam==NULL)
 		return -ENODEV;
-		
+
 	parport_claim_or_block(qcam->pdev);
 
 	qc_reset(qcam);
-	
+
 	if(qc_detect(qcam)==0)
 	{
 		parport_release(qcam->pdev);
@@ -920,9 +920,9 @@ static int init_bwqcam(struct parport *port)
 	qc_calibrate(qcam);
 
 	parport_release(qcam->pdev);
-	
+
 	printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
-	
+
 	if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
 	{
 		parport_unregister_device(qcam->pdev);
@@ -1013,7 +1013,7 @@ static int __init init_bw_qcams(void)
 		printk("Connectix Quickcam max-poll was above 5000. Using 5000.\n");
 		maxpoll = 5000;
 	}
-	
+
 	if (yieldlines < 1) {
 		printk("Connectix Quickcam yieldlines was less than 1. Using 1.\n");
 		yieldlines = 1;
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 8211fd8d7cbf..22a7386bbea6 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -16,7 +16,7 @@
  *
  * The parport parameter controls which parports will be scanned.
  * Scanning all parports causes some printers to print a garbage page.
- *       -- March 14, 1999  Billy Donahue <billy@escape.com> 
+ *       -- March 14, 1999  Billy Donahue <billy@escape.com>
  *
  * Fixed data format to BGR, added force_rgb parameter. Added missing
  * parport_unregister_driver() on module removal.
@@ -88,7 +88,7 @@ static inline unsigned int qcam_ready2(struct qcam_device *qcam)
 	return (parport_read_data(qcam->pport) & 0x1)?1:0;
 }
 
-static unsigned int qcam_await_ready1(struct qcam_device *qcam, 
+static unsigned int qcam_await_ready1(struct qcam_device *qcam,
 					     int value)
 {
 	unsigned long oldjiffies = jiffies;
@@ -98,7 +98,7 @@ static unsigned int qcam_await_ready1(struct qcam_device *qcam,
 		if (qcam_ready1(qcam) == value)
 			return 0;
 
-	/* If the camera didn't respond within 1/25 second, poll slowly 
+	/* If the camera didn't respond within 1/25 second, poll slowly
 	   for a while. */
 	for (i = 0; i < 50; i++)
 	{
@@ -123,7 +123,7 @@ static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value)
 		if (qcam_ready2(qcam) == value)
 			return 0;
 
-	/* If the camera didn't respond within 1/25 second, poll slowly 
+	/* If the camera didn't respond within 1/25 second, poll slowly
 	   for a while. */
 	for (i = 0; i < 50; i++)
 	{
@@ -157,12 +157,12 @@ static int qcam_write_data(struct qcam_device *qcam, unsigned int data)
 	unsigned int idata;
 	parport_write_data(qcam->pport, data);
 	idata = qcam_read_data(qcam);
-	if (data != idata) 
+	if (data != idata)
 	{
-		printk(KERN_WARNING "cqcam: sent %x but received %x\n", data, 
+		printk(KERN_WARNING "cqcam: sent %x but received %x\n", data,
 		       idata);
 		return 1;
-	} 
+	}
 	return 0;
 }
 
@@ -193,12 +193,12 @@ static int qc_detect(struct qcam_device *qcam)
 	   no device was found".  Fix this one day. */
 	if (qcam->pport->probe_info[0].class == PARPORT_CLASS_MEDIA
 	    && qcam->pport->probe_info[0].model
-	    && !strcmp(qcam->pdev->port->probe_info[0].model, 
+	    && !strcmp(qcam->pdev->port->probe_info[0].model,
 		       "Color QuickCam 2.0")) {
 		printk(KERN_DEBUG "QuickCam: Found by IEEE1284 probe.\n");
 		return 1;
 	}
-	
+
 	if (probe < 2)
 		return 0;
 
@@ -206,11 +206,11 @@ static int qc_detect(struct qcam_device *qcam)
 
 	/* look for a heartbeat */
 	ostat = stat = parport_read_status(qcam->pport);
-	for (i=0; i<250; i++) 
+	for (i=0; i<250; i++)
 	{
 		mdelay(1);
 		stat = parport_read_status(qcam->pport);
-		if (ostat != stat) 
+		if (ostat != stat)
 		{
 			if (++count >= 3) return 1;
 			ostat = stat;
@@ -226,11 +226,11 @@ static int qc_detect(struct qcam_device *qcam)
 	count = 0;
 
 	ostat = stat = parport_read_status(qcam->pport);
-	for (i=0; i<250; i++) 
+	for (i=0; i<250; i++)
 	{
 		mdelay(1);
 		stat = parport_read_status(qcam->pport);
-		if (ostat != stat) 
+		if (ostat != stat)
 		{
 			if (++count >= 3) return 1;
 			ostat = stat;
@@ -247,7 +247,7 @@ static void qc_reset(struct qcam_device *qcam)
 	parport_write_control(qcam->pport, 0x8);
 	mdelay(1);
 	parport_write_control(qcam->pport, 0xc);
-	mdelay(1);          
+	mdelay(1);
 }
 
 /* Reset the QuickCam and program for brightness, contrast,
@@ -258,7 +258,7 @@ static void qc_setup(struct qcam_device *q)
 	qc_reset(q);
 
 	/* Set the brightness.  */
-       	qcam_set(q, 11, q->brightness);
+	qcam_set(q, 11, q->brightness);
 
 	/* Set the height and width.  These refer to the actual
 	   CCD area *before* applying the selected decimation.  */
@@ -272,12 +272,12 @@ static void qc_setup(struct qcam_device *q)
 	/* Set contrast and white balance.  */
 	qcam_set(q, 0x19, q->contrast);
 	qcam_set(q, 0x1f, q->whitebal);
-	
+
 	/* Set the speed.  */
 	qcam_set(q, 45, 2);
 }
 
-/* Read some bytes from the camera and put them in the buffer. 
+/* Read some bytes from the camera and put them in the buffer.
    nbytes should be a multiple of 3, because bidirectional mode gives
    us three bytes at a time.  */
 
@@ -383,7 +383,7 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le
 
 	if (qcam_set(q, 7, (q->mode | (is_bi_dir?1:0)) + 1))
 		return -EIO;
-	
+
 	lines = q->height;
 	pixelsperline = q->width;
 	bitsperxfer = (is_bi_dir) ? 24 : 8;
@@ -499,7 +499,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 {
 	struct video_device *dev = video_devdata(file);
 	struct qcam_device *qcam=(struct qcam_device *)dev;
-	
+
 	switch(cmd)
 	{
 		case VIDIOCGCAP:
@@ -574,7 +574,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 			 */
 			if (p->depth != 24 || p->palette != VIDEO_PALETTE_RGB24)
 				return -EINVAL;
-			
+
 			/*
 			 *	Now load the camera.
 			 */
@@ -584,7 +584,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 
 			mutex_lock(&qcam->lock);
 			parport_claim_or_block(qcam->pdev);
-			qc_setup(qcam); 
+			qc_setup(qcam);
 			parport_release(qcam->pdev);
 			mutex_unlock(&qcam->lock);
 			return 0;
@@ -601,11 +601,11 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 				return -EINVAL;
 			if(vw->width<80||vw->width>320)
 				return -EINVAL;
-				
+
 			qcam->width = 80;
 			qcam->height = 60;
 			qcam->mode = QC_DECIMATION_4;
-			
+
 			if(vw->width>=160 && vw->height>=120)
 			{
 				qcam->width = 160;
@@ -627,7 +627,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 				qcam->mode = QC_BILLIONS | QC_DECIMATION_1;
 			}
 #endif
-			/* Ok we figured out what to use from our 
+			/* Ok we figured out what to use from our
 			   wide choice */
 			mutex_lock(&qcam->lock);
 			parport_claim_or_block(qcam->pdev);
@@ -676,7 +676,7 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 	mutex_lock(&qcam->lock);
 	parport_claim_or_block(qcam->pdev);
 	/* Probably should have a semaphore against multiple users */
-	len = qc_capture(qcam, buf,count); 
+	len = qc_capture(qcam, buf,count);
 	parport_release(qcam->pdev);
 	mutex_unlock(&qcam->lock);
 	return len;
@@ -707,7 +707,7 @@ static struct video_device qcam_template=
 static struct qcam_device *qcam_init(struct parport *port)
 {
 	struct qcam_device *q;
-	
+
 	q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
 	if(q==NULL)
 		return NULL;
@@ -718,14 +718,14 @@ static struct qcam_device *qcam_init(struct parport *port)
 
 	q->bidirectional = (q->pport->modes & PARPORT_MODE_TRISTATE)?1:0;
 
-	if (q->pdev == NULL) 
+	if (q->pdev == NULL)
 	{
 		printk(KERN_ERR "c-qcam: couldn't register for %s.\n",
 		       port->name);
 		kfree(q);
 		return NULL;
 	}
-	
+
 	memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
 
 	mutex_init(&q->lock);
@@ -766,11 +766,11 @@ static int init_cqcam(struct parport *port)
 	qcam = qcam_init(port);
 	if (qcam==NULL)
 		return -ENODEV;
-		
+
 	parport_claim_or_block(qcam->pdev);
 
 	qc_reset(qcam);
-	
+
 	if (probe && qc_detect(qcam)==0)
 	{
 		parport_release(qcam->pdev);
@@ -782,7 +782,7 @@ static int init_cqcam(struct parport *port)
 	qc_setup(qcam);
 
 	parport_release(qcam->pdev);
-	
+
 	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
 	{
 		printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
@@ -792,9 +792,9 @@ static int init_cqcam(struct parport *port)
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "video%d: Colour QuickCam found on %s\n", 
+	printk(KERN_INFO "video%d: Colour QuickCam found on %s\n",
 	       qcam->vdev.minor, qcam->pport->name);
-	
+
 	qcams[num_cams++] = qcam;
 
 	return 0;
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 3cebfa91ca14..2227c5640c12 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -24,7 +24,7 @@
  */
 
 /* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */  
+/* #define _CPIA_DEBUG_  1 */
 
 #include <linux/config.h>
 
@@ -67,11 +67,11 @@ MODULE_SUPPORTED_DEVICE("video");
 static unsigned short colorspace_conv = 0;
 module_param(colorspace_conv, ushort, 0444);
 MODULE_PARM_DESC(colorspace_conv,
-                 "\n<n> Colorspace conversion:"
-                 "\n0 = disable"
-                 "\n1 = enable"
-                 "\nDefault value is 0"
-                 "\n");
+		 "\n<n> Colorspace conversion:"
+		 "\n0 = disable"
+		 "\n1 = enable"
+		 "\nDefault value is 0"
+		 "\n");
 
 #define ABOUT "V4L-Driver for Vision CPiA based cameras"
 
@@ -189,8 +189,8 @@ enum {
 #define TC             94
 #define	EXP_ACC_DARK   50
 #define	EXP_ACC_LIGHT  90
-#define HIGH_COMP_102 160		
-#define MAX_COMP      239		
+#define HIGH_COMP_102 160
+#define MAX_COMP      239
 #define DARK_TIME       3
 #define LIGHT_TIME      3
 
@@ -208,7 +208,7 @@ static u8 flicker_jumps[2][2][4] =
 static void reset_camera_struct(struct cam_data *cam);
 static int find_over_exposure(int brightness);
 static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
-                        int on);
+			int on);
 
 
 /**********************************************************************
@@ -262,7 +262,7 @@ static void rvfree(void *mem, unsigned long size)
 static struct proc_dir_entry *cpia_proc_root=NULL;
 
 static int cpia_read_proc(char *page, char **start, off_t off,
-                          int count, int *eof, void *data)
+			  int count, int *eof, void *data)
 {
 	char *out = page;
 	int len, tmp;
@@ -276,58 +276,58 @@ static int cpia_read_proc(char *page, char **start, off_t off,
 	out += sprintf(out, "V4L Driver version:       %d.%d.%d\n",
 		       CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER);
 	out += sprintf(out, "CPIA Version:             %d.%02d (%d.%d)\n",
-	               cam->params.version.firmwareVersion,
-	               cam->params.version.firmwareRevision,
-	               cam->params.version.vcVersion,
-	               cam->params.version.vcRevision);
+		       cam->params.version.firmwareVersion,
+		       cam->params.version.firmwareRevision,
+		       cam->params.version.vcVersion,
+		       cam->params.version.vcRevision);
 	out += sprintf(out, "CPIA PnP-ID:              %04x:%04x:%04x\n",
-	               cam->params.pnpID.vendor, cam->params.pnpID.product,
-	               cam->params.pnpID.deviceRevision);
+		       cam->params.pnpID.vendor, cam->params.pnpID.product,
+		       cam->params.pnpID.deviceRevision);
 	out += sprintf(out, "VP-Version:               %d.%d %04x\n",
-	               cam->params.vpVersion.vpVersion,
-	               cam->params.vpVersion.vpRevision,
-	               cam->params.vpVersion.cameraHeadID);
-	
+		       cam->params.vpVersion.vpVersion,
+		       cam->params.vpVersion.vpRevision,
+		       cam->params.vpVersion.cameraHeadID);
+
 	out += sprintf(out, "system_state:             %#04x\n",
-	               cam->params.status.systemState);
+		       cam->params.status.systemState);
 	out += sprintf(out, "grab_state:               %#04x\n",
-	               cam->params.status.grabState);
+		       cam->params.status.grabState);
 	out += sprintf(out, "stream_state:             %#04x\n",
-	               cam->params.status.streamState);
+		       cam->params.status.streamState);
 	out += sprintf(out, "fatal_error:              %#04x\n",
-	               cam->params.status.fatalError);
+		       cam->params.status.fatalError);
 	out += sprintf(out, "cmd_error:                %#04x\n",
-	               cam->params.status.cmdError);
+		       cam->params.status.cmdError);
 	out += sprintf(out, "debug_flags:              %#04x\n",
-	               cam->params.status.debugFlags);
+		       cam->params.status.debugFlags);
 	out += sprintf(out, "vp_status:                %#04x\n",
-	               cam->params.status.vpStatus);
+		       cam->params.status.vpStatus);
 	out += sprintf(out, "error_code:               %#04x\n",
-	               cam->params.status.errorCode);
+		       cam->params.status.errorCode);
 	/* QX3 specific entries */
 	if (cam->params.qx3.qx3_detected) {
 		out += sprintf(out, "button:                   %4d\n",
-		               cam->params.qx3.button);
+			       cam->params.qx3.button);
 		out += sprintf(out, "cradled:                  %4d\n",
-		               cam->params.qx3.cradled);
+			       cam->params.qx3.cradled);
 	}
 	out += sprintf(out, "video_size:               %s\n",
-	               cam->params.format.videoSize == VIDEOSIZE_CIF ?
+		       cam->params.format.videoSize == VIDEOSIZE_CIF ?
 		       "CIF " : "QCIF");
 	out += sprintf(out, "roi:                      (%3d, %3d) to (%3d, %3d)\n",
-	               cam->params.roi.colStart*8,
-	               cam->params.roi.rowStart*4,
-	               cam->params.roi.colEnd*8,
-	               cam->params.roi.rowEnd*4);
+		       cam->params.roi.colStart*8,
+		       cam->params.roi.rowStart*4,
+		       cam->params.roi.colEnd*8,
+		       cam->params.roi.rowEnd*4);
 	out += sprintf(out, "actual_fps:               %3d\n", cam->fps);
 	out += sprintf(out, "transfer_rate:            %4dkB/s\n",
-	               cam->transfer_rate);
-	
+		       cam->transfer_rate);
+
 	out += sprintf(out, "\nread-write\n");
 	out += sprintf(out, "-----------------------  current       min"
-	               "       max   default  comment\n");
+		       "       max   default  comment\n");
 	out += sprintf(out, "brightness:             %8d  %8d  %8d  %8d\n",
-	               cam->params.colourParams.brightness, 0, 100, 50);
+		       cam->params.colourParams.brightness, 0, 100, 50);
 	if (cam->params.version.firmwareVersion == 1 &&
 	   cam->params.version.firmwareRevision == 2)
 		/* 1-02 firmware limits contrast to 80 */
@@ -336,26 +336,26 @@ static int cpia_read_proc(char *page, char **start, off_t off,
 		tmp = 96;
 
 	out += sprintf(out, "contrast:               %8d  %8d  %8d  %8d"
-	               "  steps of 8\n",
-	               cam->params.colourParams.contrast, 0, tmp, 48);
+		       "  steps of 8\n",
+		       cam->params.colourParams.contrast, 0, tmp, 48);
 	out += sprintf(out, "saturation:             %8d  %8d  %8d  %8d\n",
-	               cam->params.colourParams.saturation, 0, 100, 50);
+		       cam->params.colourParams.saturation, 0, 100, 50);
 	tmp = (25000+5000*cam->params.sensorFps.baserate)/
 	      (1<<cam->params.sensorFps.divisor);
 	out += sprintf(out, "sensor_fps:             %4d.%03d  %8d  %8d  %8d\n",
-	               tmp/1000, tmp%1000, 3, 30, 15);
+		       tmp/1000, tmp%1000, 3, 30, 15);
 	out += sprintf(out, "stream_start_line:      %8d  %8d  %8d  %8d\n",
-	               2*cam->params.streamStartLine, 0,
+		       2*cam->params.streamStartLine, 0,
 		       cam->params.format.videoSize == VIDEOSIZE_CIF ? 288:144,
 		       cam->params.format.videoSize == VIDEOSIZE_CIF ? 240:120);
 	out += sprintf(out, "sub_sample:             %8s  %8s  %8s  %8s\n",
-	               cam->params.format.subSample == SUBSAMPLE_420 ?
+		       cam->params.format.subSample == SUBSAMPLE_420 ?
 		       "420" : "422", "420", "422", "422");
 	out += sprintf(out, "yuv_order:              %8s  %8s  %8s  %8s\n",
-	               cam->params.format.yuvOrder == YUVORDER_YUYV ?
+		       cam->params.format.yuvOrder == YUVORDER_YUYV ?
 		       "YUYV" : "UYVY", "YUYV" , "UYVY", "YUYV");
 	out += sprintf(out, "ecp_timing:             %8s  %8s  %8s  %8s\n",
-	               cam->params.ecpTiming ? "slow" : "normal", "slow",
+		       cam->params.ecpTiming ? "slow" : "normal", "slow",
 		       "normal", "normal");
 
 	if (cam->params.colourBalance.balanceMode == 2) {
@@ -366,11 +366,11 @@ static int cpia_read_proc(char *page, char **start, off_t off,
 	out += sprintf(out, "color_balance_mode:     %8s  %8s  %8s"
 		       "  %8s\n",  tmpstr, "manual", "auto", "auto");
 	out += sprintf(out, "red_gain:               %8d  %8d  %8d  %8d\n",
-	               cam->params.colourBalance.redGain, 0, 212, 32);
+		       cam->params.colourBalance.redGain, 0, 212, 32);
 	out += sprintf(out, "green_gain:             %8d  %8d  %8d  %8d\n",
-	               cam->params.colourBalance.greenGain, 0, 212, 6);
+		       cam->params.colourBalance.greenGain, 0, 212, 6);
 	out += sprintf(out, "blue_gain:              %8d  %8d  %8d  %8d\n",
-	               cam->params.colourBalance.blueGain, 0, 212, 92);
+		       cam->params.colourBalance.blueGain, 0, 212, 92);
 
 	if (cam->params.version.firmwareVersion == 1 &&
 	   cam->params.version.firmwareRevision == 2)
@@ -381,11 +381,11 @@ static int cpia_read_proc(char *page, char **start, off_t off,
 
 	if (cam->params.exposure.gainMode == 0)
 		out += sprintf(out, "max_gain:                unknown  %28s"
-		               "  powers of 2\n", tmpstr); 
+			       "  powers of 2\n", tmpstr);
 	else
 		out += sprintf(out, "max_gain:               %8d  %28s"
 			       "  1,2,4 or 8 \n",
-		               1<<(cam->params.exposure.gainMode-1), tmpstr);
+			       1<<(cam->params.exposure.gainMode-1), tmpstr);
 
 	switch(cam->params.exposure.expMode) {
 	case 1:
@@ -402,10 +402,10 @@ static int cpia_read_proc(char *page, char **start, off_t off,
 	out += sprintf(out, "exposure_mode:          %8s  %8s  %8s"
 		       "  %8s\n",  tmpstr, "manual", "auto", "auto");
 	out += sprintf(out, "centre_weight:          %8s  %8s  %8s  %8s\n",
-	               (2-cam->params.exposure.centreWeight) ? "on" : "off",
-	               "off", "on", "on");
+		       (2-cam->params.exposure.centreWeight) ? "on" : "off",
+		       "off", "on", "on");
 	out += sprintf(out, "gain:                   %8d  %8d  max_gain  %8d  1,2,4,8 possible\n",
-	               1<<cam->params.exposure.gain, 1, 1);
+		       1<<cam->params.exposure.gain, 1, 1);
 	if (cam->params.version.firmwareVersion == 1 &&
 	   cam->params.version.firmwareRevision == 2)
 		/* 1-02 firmware limits fineExp/2 to 127 */
@@ -414,7 +414,7 @@ static int cpia_read_proc(char *page, char **start, off_t off,
 		tmp = 510;
 
 	out += sprintf(out, "fine_exp:               %8d  %8d  %8d  %8d\n",
-	               cam->params.exposure.fineExp*2, 0, tmp, 0);
+		       cam->params.exposure.fineExp*2, 0, tmp, 0);
 	if (cam->params.version.firmwareVersion == 1 &&
 	   cam->params.version.firmwareRevision == 2)
 		/* 1-02 firmware limits coarseExpHi to 0 */
@@ -426,46 +426,46 @@ static int cpia_read_proc(char *page, char **start, off_t off,
 		       "  %8d\n", cam->params.exposure.coarseExpLo+
 		       256*cam->params.exposure.coarseExpHi, 0, tmp, 185);
 	out += sprintf(out, "red_comp:               %8d  %8d  %8d  %8d\n",
-	               cam->params.exposure.redComp, COMP_RED, 255, COMP_RED);
+		       cam->params.exposure.redComp, COMP_RED, 255, COMP_RED);
 	out += sprintf(out, "green1_comp:            %8d  %8d  %8d  %8d\n",
-	               cam->params.exposure.green1Comp, COMP_GREEN1, 255,
+		       cam->params.exposure.green1Comp, COMP_GREEN1, 255,
 		       COMP_GREEN1);
 	out += sprintf(out, "green2_comp:            %8d  %8d  %8d  %8d\n",
-	               cam->params.exposure.green2Comp, COMP_GREEN2, 255,
+		       cam->params.exposure.green2Comp, COMP_GREEN2, 255,
 		       COMP_GREEN2);
 	out += sprintf(out, "blue_comp:              %8d  %8d  %8d  %8d\n",
-	               cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE);
-	
+		       cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE);
+
 	out += sprintf(out, "apcor_gain1:            %#8x  %#8x  %#8x  %#8x\n",
-	               cam->params.apcor.gain1, 0, 0xff, 0x1c);
+		       cam->params.apcor.gain1, 0, 0xff, 0x1c);
 	out += sprintf(out, "apcor_gain2:            %#8x  %#8x  %#8x  %#8x\n",
-	               cam->params.apcor.gain2, 0, 0xff, 0x1a);
+		       cam->params.apcor.gain2, 0, 0xff, 0x1a);
 	out += sprintf(out, "apcor_gain4:            %#8x  %#8x  %#8x  %#8x\n",
-	               cam->params.apcor.gain4, 0, 0xff, 0x2d);
+		       cam->params.apcor.gain4, 0, 0xff, 0x2d);
 	out += sprintf(out, "apcor_gain8:            %#8x  %#8x  %#8x  %#8x\n",
-	               cam->params.apcor.gain8, 0, 0xff, 0x2a);
+		       cam->params.apcor.gain8, 0, 0xff, 0x2a);
 	out += sprintf(out, "vl_offset_gain1:        %8d  %8d  %8d  %8d\n",
-	               cam->params.vlOffset.gain1, 0, 255, 24);
+		       cam->params.vlOffset.gain1, 0, 255, 24);
 	out += sprintf(out, "vl_offset_gain2:        %8d  %8d  %8d  %8d\n",
-	               cam->params.vlOffset.gain2, 0, 255, 28);
+		       cam->params.vlOffset.gain2, 0, 255, 28);
 	out += sprintf(out, "vl_offset_gain4:        %8d  %8d  %8d  %8d\n",
-	               cam->params.vlOffset.gain4, 0, 255, 30);
+		       cam->params.vlOffset.gain4, 0, 255, 30);
 	out += sprintf(out, "vl_offset_gain8:        %8d  %8d  %8d  %8d\n",
-	               cam->params.vlOffset.gain8, 0, 255, 30);
+		       cam->params.vlOffset.gain8, 0, 255, 30);
 	out += sprintf(out, "flicker_control:        %8s  %8s  %8s  %8s\n",
-	               cam->params.flickerControl.flickerMode ? "on" : "off",
+		       cam->params.flickerControl.flickerMode ? "on" : "off",
 		       "off", "on", "off");
 	out += sprintf(out, "mains_frequency:        %8d  %8d  %8d  %8d"
-	               " only 50/60\n",
-	               cam->mainsFreq ? 60 : 50, 50, 60, 50);
+		       " only 50/60\n",
+		       cam->mainsFreq ? 60 : 50, 50, 60, 50);
 	if(cam->params.flickerControl.allowableOverExposure < 0)
 		out += sprintf(out, "allowable_overexposure: %4dauto      auto  %8d      auto\n",
-		               -cam->params.flickerControl.allowableOverExposure,
-		               255);
+			       -cam->params.flickerControl.allowableOverExposure,
+			       255);
 	else
 		out += sprintf(out, "allowable_overexposure: %8d      auto  %8d      auto\n",
-		               cam->params.flickerControl.allowableOverExposure,
-		               255);
+			       cam->params.flickerControl.allowableOverExposure,
+			       255);
 	out += sprintf(out, "compression_mode:       ");
 	switch(cam->params.compression.mode) {
 	case CPIA_COMPRESSION_NONE:
@@ -483,52 +483,52 @@ static int cpia_read_proc(char *page, char **start, off_t off,
 	}
 	out += sprintf(out, "    none,auto,manual      auto\n");
 	out += sprintf(out, "decimation_enable:      %8s  %8s  %8s  %8s\n",
-        	       cam->params.compression.decimation ==
-		       DECIMATION_ENAB ? "on":"off", "off", "on", 
+		       cam->params.compression.decimation ==
+		       DECIMATION_ENAB ? "on":"off", "off", "on",
 		       "off");
 	out += sprintf(out, "compression_target:    %9s %9s %9s %9s\n",
-	               cam->params.compressionTarget.frTargeting  == 
+		       cam->params.compressionTarget.frTargeting  ==
 		       CPIA_COMPRESSION_TARGET_FRAMERATE ?
 		       "framerate":"quality",
 		       "framerate", "quality", "quality");
 	out += sprintf(out, "target_framerate:       %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionTarget.targetFR, 1, 30, 15);
+		       cam->params.compressionTarget.targetFR, 1, 30, 15);
 	out += sprintf(out, "target_quality:         %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionTarget.targetQ, 1, 64, 5);
+		       cam->params.compressionTarget.targetQ, 1, 64, 5);
 	out += sprintf(out, "y_threshold:            %8d  %8d  %8d  %8d\n",
-	               cam->params.yuvThreshold.yThreshold, 0, 31, 6);
+		       cam->params.yuvThreshold.yThreshold, 0, 31, 6);
 	out += sprintf(out, "uv_threshold:           %8d  %8d  %8d  %8d\n",
-	               cam->params.yuvThreshold.uvThreshold, 0, 31, 6);
+		       cam->params.yuvThreshold.uvThreshold, 0, 31, 6);
 	out += sprintf(out, "hysteresis:             %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionParams.hysteresis, 0, 255, 3);
+		       cam->params.compressionParams.hysteresis, 0, 255, 3);
 	out += sprintf(out, "threshold_max:          %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionParams.threshMax, 0, 255, 11);
+		       cam->params.compressionParams.threshMax, 0, 255, 11);
 	out += sprintf(out, "small_step:             %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionParams.smallStep, 0, 255, 1);
+		       cam->params.compressionParams.smallStep, 0, 255, 1);
 	out += sprintf(out, "large_step:             %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionParams.largeStep, 0, 255, 3);
+		       cam->params.compressionParams.largeStep, 0, 255, 3);
 	out += sprintf(out, "decimation_hysteresis:  %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionParams.decimationHysteresis,
+		       cam->params.compressionParams.decimationHysteresis,
 		       0, 255, 2);
 	out += sprintf(out, "fr_diff_step_thresh:    %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionParams.frDiffStepThresh,
+		       cam->params.compressionParams.frDiffStepThresh,
 		       0, 255, 5);
 	out += sprintf(out, "q_diff_step_thresh:     %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionParams.qDiffStepThresh,
+		       cam->params.compressionParams.qDiffStepThresh,
 		       0, 255, 3);
 	out += sprintf(out, "decimation_thresh_mod:  %8d  %8d  %8d  %8d\n",
-	               cam->params.compressionParams.decimationThreshMod,
+		       cam->params.compressionParams.decimationThreshMod,
 		       0, 255, 2);
 	/* QX3 specific entries */
 	if (cam->params.qx3.qx3_detected) {
-		out += sprintf(out, "toplight:               %8s  %8s  %8s  %8s\n", 
-		               cam->params.qx3.toplight ? "on" : "off",
+		out += sprintf(out, "toplight:               %8s  %8s  %8s  %8s\n",
+			       cam->params.qx3.toplight ? "on" : "off",
 			       "off", "on", "off");
-		out += sprintf(out, "bottomlight:            %8s  %8s  %8s  %8s\n", 
-		               cam->params.qx3.bottomlight ? "on" : "off",
+		out += sprintf(out, "bottomlight:            %8s  %8s  %8s  %8s\n",
+			       cam->params.qx3.bottomlight ? "on" : "off",
 			       "off", "on", "off");
 	}
-	
+
 	len = out - page;
 	len -= off;
 	if (len < count) {
@@ -543,7 +543,7 @@ static int cpia_read_proc(char *page, char **start, off_t off,
 
 
 static int match(char *checkstr, char **buffer, unsigned long *count,
-                 int *find_colon, int *err)
+		 int *find_colon, int *err)
 {
 	int ret, colon_found = 1;
 	int len = strlen(checkstr);
@@ -583,7 +583,7 @@ static unsigned long int value(char **buffer, unsigned long *count, int *err)
 }
 
 static int cpia_write_proc(struct file *file, const char __user *buf,
-                           unsigned long count, void *data)
+			   unsigned long count, void *data)
 {
 	struct cam_data *cam = data;
 	struct cam_params new_params;
@@ -619,12 +619,12 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 		retval = -EINVAL;
 		goto out;
 	}
-	
+
 	buffer = page;
-	
+
 	if (mutex_lock_interruptible(&cam->param_lock))
 		return -ERESTARTSYS;
-	
+
 	/*
 	 * Skip over leading whitespace
 	 */
@@ -632,15 +632,15 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 		--count;
 		++buffer;
 	}
-	
+
 	memcpy(&new_params, &cam->params, sizeof(struct cam_params));
 	new_mains = cam->mainsFreq;
-	
+
 #define MATCH(x) (match(x, &buffer, &count, &find_colon, &retval))
 #define VALUE (value(&buffer,&count, &retval))
 #define FIRMWARE_VERSION(x,y) (new_params.version.firmwareVersion == (x) && \
-                               new_params.version.firmwareRevision == (y))
-	
+			       new_params.version.firmwareRevision == (y))
+
 	retval = 0;
 	while (count && !retval) {
 		find_colon = 1;
@@ -656,7 +656,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 			}
 			command_flags |= COMMAND_SETCOLOURPARAMS;
 			if(new_params.flickerControl.allowableOverExposure < 0)
-				new_params.flickerControl.allowableOverExposure = 
+				new_params.flickerControl.allowableOverExposure =
 					-find_over_exposure(new_params.colourParams.brightness);
 			if(new_params.flickerControl.flickerMode != 0)
 				command_flags |= COMMAND_SETFLICKERCTRL;
@@ -721,7 +721,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 					/* Either base rate would work here */
 					new_params.sensorFps.baserate = 1;
 				}
-				new_params.flickerControl.coarseJump = 
+				new_params.flickerControl.coarseJump =
 					flicker_jumps[new_mains]
 					[new_params.sensorFps.baserate]
 					[new_params.sensorFps.divisor];
@@ -1085,7 +1085,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 		} else if (MATCH("mains_frequency")) {
 			if (!retval && MATCH("50")) {
 				new_mains = 0;
-				new_params.flickerControl.coarseJump = 
+				new_params.flickerControl.coarseJump =
 					flicker_jumps[new_mains]
 					[new_params.sensorFps.baserate]
 					[new_params.sensorFps.divisor];
@@ -1093,7 +1093,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 					command_flags |= COMMAND_SETFLICKERCTRL;
 			} else if (!retval && MATCH("60")) {
 				new_mains = 1;
-				new_params.flickerControl.coarseJump = 
+				new_params.flickerControl.coarseJump =
 					flicker_jumps[new_mains]
 					[new_params.sensorFps.baserate]
 					[new_params.sensorFps.divisor];
@@ -1103,7 +1103,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 				retval = -EINVAL;
 		} else if (MATCH("allowable_overexposure")) {
 			if (!retval && MATCH("auto")) {
-				new_params.flickerControl.allowableOverExposure = 
+				new_params.flickerControl.allowableOverExposure =
 					-find_over_exposure(new_params.colourParams.brightness);
 				if(new_params.flickerControl.flickerMode != 0)
 					command_flags |= COMMAND_SETFLICKERCTRL;
@@ -1146,10 +1146,10 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 			command_flags |= COMMAND_SETCOMPRESSION;
 		} else if (MATCH("compression_target")) {
 			if (!retval && MATCH("quality"))
-				new_params.compressionTarget.frTargeting = 
+				new_params.compressionTarget.frTargeting =
 					CPIA_COMPRESSION_TARGET_QUALITY;
 			else if (!retval && MATCH("framerate"))
-				new_params.compressionTarget.frTargeting = 
+				new_params.compressionTarget.frTargeting =
 					CPIA_COMPRESSION_TARGET_FRAMERATE;
 			else
 				retval = -EINVAL;
@@ -1173,7 +1173,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 			if (!retval) {
 				if(val > 0 && val <= 64)
 					new_params.compressionTarget.targetQ = val;
-				else 
+				else
 					retval = -EINVAL;
 			}
 			command_flags |= COMMAND_SETCOMPRESSIONTARGET;
@@ -1288,19 +1288,19 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 			}
 			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
 		} else if (MATCH("toplight")) {
-		        if (!retval && MATCH("on"))
+			if (!retval && MATCH("on"))
 				new_params.qx3.toplight = 1;
 			else if (!retval && MATCH("off"))
 				new_params.qx3.toplight = 0;
-			else 
+			else
 				retval = -EINVAL;
 			command_flags |= COMMAND_SETLIGHTS;
 		} else if (MATCH("bottomlight")) {
-		        if (!retval && MATCH("on"))
+			if (!retval && MATCH("on"))
 				new_params.qx3.bottomlight = 1;
-			else if (!retval && MATCH("off"))  
+			else if (!retval && MATCH("off"))
 				new_params.qx3.bottomlight = 0;
-			else 
+			else
 				retval = -EINVAL;
 			command_flags |= COMMAND_SETLIGHTS;
 		} else {
@@ -1326,7 +1326,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 			}
 		}
 	}
-#undef MATCH	
+#undef MATCH
 #undef VALUE
 #undef FIRMWARE_VERSION
 	if (!retval) {
@@ -1349,24 +1349,24 @@ static int cpia_write_proc(struct file *file, const char __user *buf,
 		retval = size;
 	} else
 		DBG("error: %d\n", retval);
-	
+
 	mutex_unlock(&cam->param_lock);
-	
+
 out:
 	free_page((unsigned long)page);
- 	return retval;
+	return retval;
 }
 
 static void create_proc_cpia_cam(struct cam_data *cam)
 {
 	char name[7];
 	struct proc_dir_entry *ent;
-	
+
 	if (!cpia_proc_root || !cam)
 		return;
 
 	sprintf(name, "video%d", cam->vdev.minor);
-	
+
 	ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root);
 	if (!ent)
 		return;
@@ -1374,9 +1374,9 @@ static void create_proc_cpia_cam(struct cam_data *cam)
 	ent->data = cam;
 	ent->read_proc = cpia_read_proc;
 	ent->write_proc = cpia_write_proc;
-	/* 
+	/*
 	   size of the proc entry is 3736 bytes for the standard webcam;
- 	   the extra features of the QX3 microscope add 189 bytes.
+	   the extra features of the QX3 microscope add 189 bytes.
 	   (we have not yet probed the camera to see which type it is).
 	*/
 	ent->size = 3736 + 189;
@@ -1386,10 +1386,10 @@ static void create_proc_cpia_cam(struct cam_data *cam)
 static void destroy_proc_cpia_cam(struct cam_data *cam)
 {
 	char name[7];
-	
+
 	if (!cam || !cam->proc_entry)
 		return;
-	
+
 	sprintf(name, "video%d", cam->vdev.minor);
 	remove_proc_entry(name, cpia_proc_root);
 	cam->proc_entry = NULL;
@@ -1596,13 +1596,13 @@ static void set_vw_size(struct cam_data *cam)
 		cam->vc.width = cam->vw.width;
 	if(cam->vc.height == 0)
 		cam->vc.height = cam->vw.height;
-	
+
 	cam->params.roi.colStart += cam->vc.x >> 3;
 	cam->params.roi.colEnd = cam->params.roi.colStart +
-	                         (cam->vc.width >> 3);
+				 (cam->vc.width >> 3);
 	cam->params.roi.rowStart += cam->vc.y >> 2;
 	cam->params.roi.rowEnd = cam->params.roi.rowStart +
-	                         (cam->vc.height >> 2);
+				 (cam->vc.height >> 2);
 
 	return;
 }
@@ -1624,7 +1624,7 @@ static int allocate_frame_buf(struct cam_data *cam)
 static int free_frame_buf(struct cam_data *cam)
 {
 	int i;
-	
+
 	rvfree(cam->frame_buf, FRAME_NUM*CPIA_MAX_FRAME_SIZE);
 	cam->frame_buf = NULL;
 	for (i=0; i < FRAME_NUM; i++)
@@ -1667,7 +1667,7 @@ static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d)
 		mutex_lock(&cam->param_lock);
 		datasize=8;
 		break;
-	case CPIA_COMMAND_ReadMCPorts: 
+	case CPIA_COMMAND_ReadMCPorts:
 	case CPIA_COMMAND_ReadVCRegs:
 		datasize = 4;
 		break;
@@ -1746,10 +1746,10 @@ static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d)
 			mutex_unlock(&cam->param_lock);
 			break;
 
-		case CPIA_COMMAND_ReadMCPorts: 
-			if (!cam->params.qx3.qx3_detected) 
+		case CPIA_COMMAND_ReadMCPorts:
+			if (!cam->params.qx3.qx3_detected)
 				break;
-			/* test button press */ 
+			/* test button press */
 			cam->params.qx3.button = ((data[1] & 0x02) == 0);
 			if (cam->params.qx3.button) {
 				/* button pressed - unlock the latch */
@@ -1770,9 +1770,9 @@ static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d)
 
 /* send a command  to the camera with an additional data transaction */
 static int do_command_extended(struct cam_data *cam, u16 command,
-                               u8 a, u8 b, u8 c, u8 d,
-                               u8 e, u8 f, u8 g, u8 h,
-                               u8 i, u8 j, u8 k, u8 l)
+			       u8 a, u8 b, u8 c, u8 d,
+			       u8 e, u8 f, u8 g, u8 h,
+			       u8 i, u8 j, u8 k, u8 l)
 {
 	int retval;
 	u8 cmd[8], data[8];
@@ -1809,10 +1809,10 @@ static int do_command_extended(struct cam_data *cam, u16 command,
 #define LIMIT(x) ((((x)>0xffffff)?0xff0000:(((x)<=0xffff)?0:(x)&0xff0000))>>16)
 
 static int convert420(unsigned char *yuv, unsigned char *rgb, int out_fmt,
-                      int linesize, int mmap_kludge)
+		      int linesize, int mmap_kludge)
 {
 	int y, u, v, r, g, b, y1;
-	
+
 	/* Odd lines use the same u and v as the previous line.
 	 * Because of compression, it is necessary to get this
 	 * information from the decoded image. */
@@ -1925,7 +1925,7 @@ static int convert420(unsigned char *yuv, unsigned char *rgb, int out_fmt,
 
 
 static int yuvconvert(unsigned char *yuv, unsigned char *rgb, int out_fmt,
-                      int in_uyvy, int mmap_kludge)
+		      int in_uyvy, int mmap_kludge)
 {
 	int y, u, v, r, g, b, y1;
 
@@ -2078,21 +2078,21 @@ static int parse_picture(struct cam_data *cam, int size)
 		mutex_unlock(&cam->param_lock);
 		return -1;
 	}
-	
+
 	if (ibuf[17] != SUBSAMPLE_420 && ibuf[17] != SUBSAMPLE_422) {
 		LOG("illegal subtype %d\n",ibuf[17]);
 		mutex_unlock(&cam->param_lock);
 		return -1;
 	}
 	subsample_422 = ibuf[17] == SUBSAMPLE_422;
-	
+
 	if (ibuf[18] != YUVORDER_YUYV && ibuf[18] != YUVORDER_UYVY) {
 		LOG("illegal yuvorder %d\n",ibuf[18]);
 		mutex_unlock(&cam->param_lock);
 		return -1;
 	}
 	in_uyvy = ibuf[18] == YUVORDER_UYVY;
-	
+
 	if ((ibuf[24] != cam->params.roi.colStart) ||
 	    (ibuf[25] != cam->params.roi.colEnd) ||
 	    (ibuf[26] != cam->params.roi.rowStart) ||
@@ -2104,20 +2104,20 @@ static int parse_picture(struct cam_data *cam, int size)
 	cols = 8*(ibuf[25] - ibuf[24]);
 	rows = 4*(ibuf[27] - ibuf[26]);
 
-	
+
 	if ((ibuf[28] != NOT_COMPRESSED) && (ibuf[28] != COMPRESSED)) {
 		LOG("illegal compression %d\n",ibuf[28]);
 		mutex_unlock(&cam->param_lock);
 		return -1;
 	}
 	compressed = (ibuf[28] == COMPRESSED);
-	
+
 	if (ibuf[29] != NO_DECIMATION && ibuf[29] != DECIMATION_ENAB) {
 		LOG("illegal decimation %d\n",ibuf[29]);
 		mutex_unlock(&cam->param_lock);
 		return -1;
 	}
-	decimation = (ibuf[29] == DECIMATION_ENAB);	
+	decimation = (ibuf[29] == DECIMATION_ENAB);
 
 	cam->params.yuvThreshold.yThreshold = ibuf[30];
 	cam->params.yuvThreshold.uvThreshold = ibuf[31];
@@ -2131,7 +2131,7 @@ static int parse_picture(struct cam_data *cam, int size)
 	cam->params.status.errorCode = ibuf[39];
 	cam->fps = ibuf[41];
 	mutex_unlock(&cam->param_lock);
-	
+
 	linesize = skipcount(cols, out_fmt);
 	ibuf += FRAME_HEADER_SIZE;
 	size -= FRAME_HEADER_SIZE;
@@ -2150,14 +2150,14 @@ static int parse_picture(struct cam_data *cam, int size)
 			if (!compressed || (compressed && !(*ibuf & 1))) {
 				if(subsample_422 || even_line) {
 				obuf += yuvconvert(ibuf, obuf, out_fmt,
-				                   in_uyvy, cam->mmap_kludge);
+						   in_uyvy, cam->mmap_kludge);
 				ibuf += 4;
 				ll -= 4;
 			} else {
 					/* SUBSAMPLE_420 on an odd line */
 					obuf += convert420(ibuf, obuf,
-					                   out_fmt, linesize,
-			                		   cam->mmap_kludge);
+							   out_fmt, linesize,
+							   cam->mmap_kludge);
 					ibuf += 2;
 					ll -= 2;
 				}
@@ -2183,7 +2183,7 @@ static int parse_picture(struct cam_data *cam, int size)
 
 			if ((size > 3) && (ibuf[0] == EOI) && (ibuf[1] == EOI) &&
 			   (ibuf[2] == EOI) && (ibuf[3] == EOI)) {
-			 	size -= 4;
+				size -= 4;
 				break;
 			}
 
@@ -2204,7 +2204,7 @@ static int parse_picture(struct cam_data *cam, int size)
 			return -1;
 		}
 	}
-	
+
 	if(decimation) {
 		/* interpolate odd rows */
 		int i, j;
@@ -2233,7 +2233,7 @@ static int parse_picture(struct cam_data *cam, int size)
 static inline int init_stream_cap(struct cam_data *cam)
 {
 	return do_command(cam, CPIA_COMMAND_InitStreamCap,
-	                  0, cam->params.streamStartLine, 0, 0);
+			  0, cam->params.streamStartLine, 0, 0);
 }
 
 
@@ -2254,7 +2254,7 @@ static int find_over_exposure(int brightness)
 	int MaxAllowableOverExposure, OverExposure;
 
 	MaxAllowableOverExposure = FLICKER_MAX_EXPOSURE - brightness -
-	                           FLICKER_BRIGHTNESS_CONSTANT;
+				   FLICKER_BRIGHTNESS_CONSTANT;
 
 	if (MaxAllowableOverExposure < FLICKER_ALLOWABLE_OVER_EXPOSURE) {
 		OverExposure = MaxAllowableOverExposure;
@@ -2280,62 +2280,62 @@ static void dispatch_commands(struct cam_data *cam)
 	DEB_BYTE(cam->cmd_queue>>8);
 	if (cam->cmd_queue & COMMAND_SETFORMAT) {
 		do_command(cam, CPIA_COMMAND_SetFormat,
-	        	   cam->params.format.videoSize,
-	        	   cam->params.format.subSample,
-	        	   cam->params.format.yuvOrder, 0);
+			   cam->params.format.videoSize,
+			   cam->params.format.subSample,
+			   cam->params.format.yuvOrder, 0);
 		do_command(cam, CPIA_COMMAND_SetROI,
-	        	   cam->params.roi.colStart, cam->params.roi.colEnd,
-	        	   cam->params.roi.rowStart, cam->params.roi.rowEnd);
+			   cam->params.roi.colStart, cam->params.roi.colEnd,
+			   cam->params.roi.rowStart, cam->params.roi.rowEnd);
 		cam->first_frame = 1;
 	}
 
 	if (cam->cmd_queue & COMMAND_SETCOLOURPARAMS)
 		do_command(cam, CPIA_COMMAND_SetColourParams,
-		           cam->params.colourParams.brightness,
-		           cam->params.colourParams.contrast,
-		           cam->params.colourParams.saturation, 0);
+			   cam->params.colourParams.brightness,
+			   cam->params.colourParams.contrast,
+			   cam->params.colourParams.saturation, 0);
 
 	if (cam->cmd_queue & COMMAND_SETAPCOR)
 		do_command(cam, CPIA_COMMAND_SetApcor,
-		           cam->params.apcor.gain1,
-		           cam->params.apcor.gain2,
-		           cam->params.apcor.gain4,
-		           cam->params.apcor.gain8);
+			   cam->params.apcor.gain1,
+			   cam->params.apcor.gain2,
+			   cam->params.apcor.gain4,
+			   cam->params.apcor.gain8);
 
 	if (cam->cmd_queue & COMMAND_SETVLOFFSET)
 		do_command(cam, CPIA_COMMAND_SetVLOffset,
-		           cam->params.vlOffset.gain1,
-		           cam->params.vlOffset.gain2,
-		           cam->params.vlOffset.gain4,
-		           cam->params.vlOffset.gain8);
+			   cam->params.vlOffset.gain1,
+			   cam->params.vlOffset.gain2,
+			   cam->params.vlOffset.gain4,
+			   cam->params.vlOffset.gain8);
 
 	if (cam->cmd_queue & COMMAND_SETEXPOSURE) {
 		do_command_extended(cam, CPIA_COMMAND_SetExposure,
-		                    cam->params.exposure.gainMode,
-		                    1,
-		                    cam->params.exposure.compMode,
-		                    cam->params.exposure.centreWeight,
-		                    cam->params.exposure.gain,
-		                    cam->params.exposure.fineExp,
-		                    cam->params.exposure.coarseExpLo,
-		                    cam->params.exposure.coarseExpHi,
-		                    cam->params.exposure.redComp,
-		                    cam->params.exposure.green1Comp,
-		                    cam->params.exposure.green2Comp,
-		                    cam->params.exposure.blueComp);
+				    cam->params.exposure.gainMode,
+				    1,
+				    cam->params.exposure.compMode,
+				    cam->params.exposure.centreWeight,
+				    cam->params.exposure.gain,
+				    cam->params.exposure.fineExp,
+				    cam->params.exposure.coarseExpLo,
+				    cam->params.exposure.coarseExpHi,
+				    cam->params.exposure.redComp,
+				    cam->params.exposure.green1Comp,
+				    cam->params.exposure.green2Comp,
+				    cam->params.exposure.blueComp);
 		if(cam->params.exposure.expMode != 1) {
 			do_command_extended(cam, CPIA_COMMAND_SetExposure,
-		                	    0,
-		                	    cam->params.exposure.expMode,
-		                	    0, 0,
-		                	    cam->params.exposure.gain,
-		                	    cam->params.exposure.fineExp,
-		                	    cam->params.exposure.coarseExpLo,
-		                	    cam->params.exposure.coarseExpHi,
-		                	    0, 0, 0, 0);
+					    0,
+					    cam->params.exposure.expMode,
+					    0, 0,
+					    cam->params.exposure.gain,
+					    cam->params.exposure.fineExp,
+					    cam->params.exposure.coarseExpLo,
+					    cam->params.exposure.coarseExpHi,
+					    0, 0, 0, 0);
 		}
 	}
-	
+
 	if (cam->cmd_queue & COMMAND_SETCOLOURBALANCE) {
 		if (cam->params.colourBalance.balanceMode == 1) {
 			do_command(cam, CPIA_COMMAND_SetColourBalance,
@@ -2358,47 +2358,47 @@ static void dispatch_commands(struct cam_data *cam)
 
 	if (cam->cmd_queue & COMMAND_SETCOMPRESSIONTARGET)
 		do_command(cam, CPIA_COMMAND_SetCompressionTarget,
-		           cam->params.compressionTarget.frTargeting,
-		           cam->params.compressionTarget.targetFR,
-		           cam->params.compressionTarget.targetQ, 0);
+			   cam->params.compressionTarget.frTargeting,
+			   cam->params.compressionTarget.targetFR,
+			   cam->params.compressionTarget.targetQ, 0);
 
 	if (cam->cmd_queue & COMMAND_SETYUVTHRESH)
 		do_command(cam, CPIA_COMMAND_SetYUVThresh,
-		           cam->params.yuvThreshold.yThreshold,
-		           cam->params.yuvThreshold.uvThreshold, 0, 0);
+			   cam->params.yuvThreshold.yThreshold,
+			   cam->params.yuvThreshold.uvThreshold, 0, 0);
 
 	if (cam->cmd_queue & COMMAND_SETCOMPRESSIONPARAMS)
 		do_command_extended(cam, CPIA_COMMAND_SetCompressionParams,
-		            0, 0, 0, 0,
-		            cam->params.compressionParams.hysteresis,
-		            cam->params.compressionParams.threshMax,
-		            cam->params.compressionParams.smallStep,
-		            cam->params.compressionParams.largeStep,
-		            cam->params.compressionParams.decimationHysteresis,
-		            cam->params.compressionParams.frDiffStepThresh,
-		            cam->params.compressionParams.qDiffStepThresh,
-		            cam->params.compressionParams.decimationThreshMod);
+			    0, 0, 0, 0,
+			    cam->params.compressionParams.hysteresis,
+			    cam->params.compressionParams.threshMax,
+			    cam->params.compressionParams.smallStep,
+			    cam->params.compressionParams.largeStep,
+			    cam->params.compressionParams.decimationHysteresis,
+			    cam->params.compressionParams.frDiffStepThresh,
+			    cam->params.compressionParams.qDiffStepThresh,
+			    cam->params.compressionParams.decimationThreshMod);
 
 	if (cam->cmd_queue & COMMAND_SETCOMPRESSION)
 		do_command(cam, CPIA_COMMAND_SetCompression,
-		           cam->params.compression.mode,
+			   cam->params.compression.mode,
 			   cam->params.compression.decimation, 0, 0);
 
 	if (cam->cmd_queue & COMMAND_SETSENSORFPS)
 		do_command(cam, CPIA_COMMAND_SetSensorFPS,
-		           cam->params.sensorFps.divisor,
-		           cam->params.sensorFps.baserate, 0, 0);
+			   cam->params.sensorFps.divisor,
+			   cam->params.sensorFps.baserate, 0, 0);
 
 	if (cam->cmd_queue & COMMAND_SETFLICKERCTRL)
 		do_command(cam, CPIA_COMMAND_SetFlickerCtrl,
-		           cam->params.flickerControl.flickerMode,
-		           cam->params.flickerControl.coarseJump,
-		           abs(cam->params.flickerControl.allowableOverExposure),
-		           0);
+			   cam->params.flickerControl.flickerMode,
+			   cam->params.flickerControl.coarseJump,
+			   abs(cam->params.flickerControl.allowableOverExposure),
+			   0);
 
 	if (cam->cmd_queue & COMMAND_SETECPTIMING)
 		do_command(cam, CPIA_COMMAND_SetECPTiming,
-		           cam->params.ecpTiming, 0, 0, 0);
+			   cam->params.ecpTiming, 0, 0, 0);
 
 	if (cam->cmd_queue & COMMAND_PAUSE)
 		do_command(cam, CPIA_COMMAND_EndStreamCap, 0, 0, 0, 0);
@@ -2409,9 +2409,9 @@ static void dispatch_commands(struct cam_data *cam)
 	if (cam->cmd_queue & COMMAND_SETLIGHTS && cam->params.qx3.qx3_detected)
 	  {
 	    int p1 = (cam->params.qx3.bottomlight == 0) << 1;
-            int p2 = (cam->params.qx3.toplight == 0) << 3;
-            do_command(cam, CPIA_COMMAND_WriteVCReg,  0x90, 0x8F, 0x50, 0);
-            do_command(cam, CPIA_COMMAND_WriteMCPort, 2, 0, (p1|p2|0xE0), 0);
+	    int p2 = (cam->params.qx3.toplight == 0) << 3;
+	    do_command(cam, CPIA_COMMAND_WriteVCReg,  0x90, 0x8F, 0x50, 0);
+	    do_command(cam, CPIA_COMMAND_WriteMCPort, 2, 0, (p1|p2|0xE0), 0);
 	  }
 
 	cam->cmd_queue = COMMAND_NONE;
@@ -2422,11 +2422,11 @@ static void dispatch_commands(struct cam_data *cam)
 
 
 static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
-                        int on)
+			int on)
 {
 	/* Everything in here is from the Windows driver */
 #define FIRMWARE_VERSION(x,y) (params->version.firmwareVersion == (x) && \
-                               params->version.firmwareRevision == (y))
+			       params->version.firmwareRevision == (y))
 /* define for compgain calculation */
 #if 0
 #define COMPGAIN(base, curexp, newexp) \
@@ -2441,7 +2441,7 @@ static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
      (u16)(((u32)(curexp * (u8)(curcomp + 128)) / (u8)(basecomp - 128)))
 #endif
 
- 
+
 	int currentexp = params->exposure.coarseExpLo +
 			 params->exposure.coarseExpHi*256;
 	int startexp;
@@ -2482,7 +2482,7 @@ static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
 		}
 		if(FIRMWARE_VERSION(1,2))
 			params->exposure.compMode = 0;
-		else 
+		else
 			params->exposure.compMode = 1;
 
 		params->apcor.gain1 = 0x18;
@@ -2533,14 +2533,14 @@ static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
 }
 
 #define FIRMWARE_VERSION(x,y) (cam->params.version.firmwareVersion == (x) && \
-                               cam->params.version.firmwareRevision == (y))
+			       cam->params.version.firmwareRevision == (y))
 /* monitor the exposure and adjust the sensor frame rate if needed */
 static void monitor_exposure(struct cam_data *cam)
 {
 	u8 exp_acc, bcomp, gain, coarseL, cmd[8], data[8];
 	int retval, light_exp, dark_exp, very_dark_exp;
 	int old_exposure, new_exposure, framerate;
-	
+
 	/* get necessary stats and register settings from camera */
 	/* do_command can't handle this, so do it ourselves */
 	cmd[0] = CPIA_COMMAND_ReadVPRegs>>8;
@@ -2564,17 +2564,17 @@ static void monitor_exposure(struct cam_data *cam)
 
 	mutex_lock(&cam->param_lock);
 	light_exp = cam->params.colourParams.brightness +
-	            TC - 50 + EXP_ACC_LIGHT;
+		    TC - 50 + EXP_ACC_LIGHT;
 	if(light_exp > 255)
 		light_exp = 255;
 	dark_exp = cam->params.colourParams.brightness +
-	           TC - 50 - EXP_ACC_DARK;
+		   TC - 50 - EXP_ACC_DARK;
 	if(dark_exp < 0)
 		dark_exp = 0;
 	very_dark_exp = dark_exp/2;
-	
+
 	old_exposure = cam->params.exposure.coarseExpHi * 256 +
-	               cam->params.exposure.coarseExpLo;
+		       cam->params.exposure.coarseExpLo;
 
 	if(!cam->params.flickerControl.disabled) {
 		/* Flicker control on */
@@ -2667,11 +2667,11 @@ static void monitor_exposure(struct cam_data *cam)
 			cam->exposure_status = EXPOSURE_NORMAL;
 		}
 	}
-	
+
 	framerate = cam->fps;
 	if(framerate > 30 || framerate < 1)
 		framerate = 1;
-	
+
 	if(!cam->params.flickerControl.disabled) {
 		/* Flicker control on */
 		if((cam->exposure_status == EXPOSURE_VERY_DARK ||
@@ -2683,10 +2683,10 @@ static void monitor_exposure(struct cam_data *cam)
 			++cam->params.sensorFps.divisor;
 			cam->cmd_queue |= COMMAND_SETSENSORFPS;
 
-			cam->params.flickerControl.coarseJump = 
+			cam->params.flickerControl.coarseJump =
 				flicker_jumps[cam->mainsFreq]
-				             [cam->params.sensorFps.baserate]
-				             [cam->params.sensorFps.divisor];
+					     [cam->params.sensorFps.baserate]
+					     [cam->params.sensorFps.divisor];
 			cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
 
 			new_exposure = cam->params.flickerControl.coarseJump-1;
@@ -2704,15 +2704,15 @@ static void monitor_exposure(struct cam_data *cam)
 		   cam->params.sensorFps.divisor > 0) {
 
 			/* light for too long */
-		   	int max_exp = FIRMWARE_VERSION(1,2) ? MAX_EXP_102 : MAX_EXP ; 
+			int max_exp = FIRMWARE_VERSION(1,2) ? MAX_EXP_102 : MAX_EXP ;
 
 			--cam->params.sensorFps.divisor;
 			cam->cmd_queue |= COMMAND_SETSENSORFPS;
 
-			cam->params.flickerControl.coarseJump = 
+			cam->params.flickerControl.coarseJump =
 				flicker_jumps[cam->mainsFreq]
-				             [cam->params.sensorFps.baserate]
-				             [cam->params.sensorFps.divisor];
+					     [cam->params.sensorFps.baserate]
+					     [cam->params.sensorFps.divisor];
 			cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
 
 			new_exposure = cam->params.flickerControl.coarseJump-1;
@@ -2772,7 +2772,7 @@ static void monitor_exposure(struct cam_data *cam)
 
    It also adjust the colour balance when an exposure step is detected - as
    long as flicker is running
-*/   
+*/
 static void restart_flicker(struct cam_data *cam)
 {
 	int cam_exposure, old_exp;
@@ -2786,22 +2786,22 @@ static void restart_flicker(struct cam_data *cam)
 	}
 	cam_exposure = cam->raw_image[39]*2;
 	old_exp = cam->params.exposure.coarseExpLo +
-	          cam->params.exposure.coarseExpHi*256;
- 	/* 
-	  see how far away camera exposure is from a valid 
- 	  flicker exposure value
- 	*/
- 	cam_exposure %= cam->params.flickerControl.coarseJump;
+		  cam->params.exposure.coarseExpHi*256;
+	/*
+	  see how far away camera exposure is from a valid
+	  flicker exposure value
+	*/
+	cam_exposure %= cam->params.flickerControl.coarseJump;
 	if(!cam->params.flickerControl.disabled &&
-     	   cam_exposure <= cam->params.flickerControl.coarseJump - 3) {
+	   cam_exposure <= cam->params.flickerControl.coarseJump - 3) {
 		/* Flicker control auto-disabled */
 		cam->params.flickerControl.disabled = 1;
 	}
-	
+
 	if(cam->params.flickerControl.disabled &&
 	   cam->params.flickerControl.flickerMode &&
 	   old_exp > cam->params.flickerControl.coarseJump +
-	             ROUND_UP_EXP_FOR_FLICKER) {
+		     ROUND_UP_EXP_FOR_FLICKER) {
 		/* exposure is now high enough to switch
 		   flicker control back on */
 		set_flicker(&cam->params, &cam->cmd_queue, 1);
@@ -2818,7 +2818,7 @@ static int clear_stall(struct cam_data *cam)
 {
 	/* FIXME: Does this actually work? */
 	LOG("Clearing stall\n");
-	
+
 	cam->ops->streamRead(cam->lowlevel_data, cam->raw_image, 0);
 	do_command(cam, CPIA_COMMAND_GetCameraStatus,0,0,0,0);
 	return cam->params.status.streamState != STREAM_PAUSED;
@@ -2878,7 +2878,7 @@ static int fetch_frame(void *data)
 					return -EINTR;
 
 				do_command(cam, CPIA_COMMAND_GetCameraStatus,
-				           0, 0, 0, 0);
+					   0, 0, 0, 0);
 			}
 			if(cam->params.status.streamState != STREAM_READY) {
 				continue;
@@ -2903,18 +2903,18 @@ static int fetch_frame(void *data)
 
 		/* Switch flicker control back on if it got turned off */
 		restart_flicker(cam);
-		
+
 		/* If AEC is enabled, monitor the exposure and
 		   adjust the sensor frame rate if needed */
 		if(cam->params.exposure.expMode == 2)
 			monitor_exposure(cam);
-		
+
 		/* camera idle now so dispatch queued commands */
 		dispatch_commands(cam);
 
 		/* Update our knowledge of the camera state */
- 		do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0);
- 		do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
+		do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0);
+		do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
 		do_command(cam, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0);
 
 		/* decompress and convert image to by copying it from
@@ -2933,7 +2933,7 @@ static int fetch_frame(void *data)
 				   uncompressed. */
 				cam->first_frame = 1;
 				do_command(cam, CPIA_COMMAND_SetGrabMode,
-		        		   CPIA_GRAB_SINGLE, 0, 0, 0);
+					   CPIA_GRAB_SINGLE, 0, 0, 0);
 				/* FIXME: Trial & error - need up to 70ms for
 				   the grab mode change to complete ? */
 				msleep_interruptible(70);
@@ -2957,12 +2957,12 @@ static int fetch_frame(void *data)
 		if (cam->first_frame) {
 			cam->first_frame = 0;
 			do_command(cam, CPIA_COMMAND_SetCompression,
-		        	   cam->params.compression.mode,
+				   cam->params.compression.mode,
 				   cam->params.compression.decimation, 0, 0);
 
 			/* Switch from single-grab to continuous grab */
 			do_command(cam, CPIA_COMMAND_SetGrabMode,
-		        	   CPIA_GRAB_CONTINUOUS, 0, 0, 0);
+				   CPIA_GRAB_CONTINUOUS, 0, 0, 0);
 		}
 		return 0;
 	}
@@ -2977,12 +2977,12 @@ static int capture_frame(struct cam_data *cam, struct video_mmap *vm)
 		if ((err = allocate_frame_buf(cam)))
 			return err;
 	}
-	
+
 	cam->curframe = vm->frame;
 	cam->frame[cam->curframe].state = FRAME_READY;
 	return fetch_frame(cam);
 }
-  
+
 static int goto_high_power(struct cam_data *cam)
 {
 	if (do_command(cam, CPIA_COMMAND_GotoHiPower, 0, 0, 0, 0))
@@ -3039,22 +3039,22 @@ static void save_camera_state(struct cam_data *cam)
 static int set_camera_state(struct cam_data *cam)
 {
 	cam->cmd_queue = COMMAND_SETCOMPRESSION |
-	                 COMMAND_SETCOMPRESSIONTARGET |
-	                 COMMAND_SETCOLOURPARAMS |
-	                 COMMAND_SETFORMAT |
-	                 COMMAND_SETYUVTHRESH |
-	                 COMMAND_SETECPTIMING |
-	                 COMMAND_SETCOMPRESSIONPARAMS |
-	                 COMMAND_SETEXPOSURE |
-	                 COMMAND_SETCOLOURBALANCE |
-	                 COMMAND_SETSENSORFPS |
-	                 COMMAND_SETAPCOR |
-	                 COMMAND_SETFLICKERCTRL |
-	                 COMMAND_SETVLOFFSET;
+			 COMMAND_SETCOMPRESSIONTARGET |
+			 COMMAND_SETCOLOURPARAMS |
+			 COMMAND_SETFORMAT |
+			 COMMAND_SETYUVTHRESH |
+			 COMMAND_SETECPTIMING |
+			 COMMAND_SETCOMPRESSIONPARAMS |
+			 COMMAND_SETEXPOSURE |
+			 COMMAND_SETCOLOURBALANCE |
+			 COMMAND_SETSENSORFPS |
+			 COMMAND_SETAPCOR |
+			 COMMAND_SETFLICKERCTRL |
+			 COMMAND_SETVLOFFSET;
 
 	do_command(cam, CPIA_COMMAND_SetGrabMode, CPIA_GRAB_SINGLE,0,0,0);
 	dispatch_commands(cam);
-	
+
 	/* Wait 6 frames for the sensor to get all settings and
 	   AEC/ACB to settle */
 	msleep_interruptible(6*(cam->params.sensorFps.baserate ? 33 : 40) *
@@ -3062,7 +3062,7 @@ static int set_camera_state(struct cam_data *cam)
 
 	if(signal_pending(current))
 		return -EINTR;
-	
+
 	save_camera_state(cam);
 
 	return 0;
@@ -3094,9 +3094,9 @@ static int reset_camera(struct cam_data *cam)
 		if (goto_low_power(cam))
 			return -ENODEV;
 	}
-	
+
 	/* procedure described in developer's guide p3-28 */
-	
+
 	/* Check the firmware version. */
 	cam->params.version.firmwareVersion = 0;
 	get_version_information(cam);
@@ -3113,14 +3113,14 @@ static int reset_camera(struct cam_data *cam)
 	cam->params.qx3.qx3_detected = (cam->params.pnpID.vendor == 0x0813 &&
 					cam->params.pnpID.product == 0x0001);
 
- 	/* The fatal error checking should be done after
+	/* The fatal error checking should be done after
 	 * the camera powers up (developer's guide p 3-38) */
 
 	/* Set streamState before transition to high power to avoid bug
 	 * in firmware 1-02 */
 	do_command(cam, CPIA_COMMAND_ModifyCameraStatus, STREAMSTATE, 0,
-	           STREAM_NOT_READY, 0);
-	
+		   STREAM_NOT_READY, 0);
+
 	/* GotoHiPower */
 	err = goto_high_power(cam);
 	if (err)
@@ -3142,16 +3142,16 @@ static int reset_camera(struct cam_data *cam)
 			/* Firmware 1-02 may do this for parallel port cameras,
 			 * just clear the flags (developer's guide p 3-38) */
 			do_command(cam, CPIA_COMMAND_ModifyCameraStatus,
-			           FATALERROR, ~(COM_FLAG|CPIA_FLAG), 0, 0);
+				   FATALERROR, ~(COM_FLAG|CPIA_FLAG), 0, 0);
 		}
 	}
-	
+
 	/* Check the camera status again */
 	if (cam->params.status.fatalError) {
 		if (cam->params.status.fatalError)
 			return -EIO;
 	}
-	
+
 	/* VPVersion can't be retrieved before the camera is in HiPower,
 	 * so get it here instead of in get_version_information. */
 	do_command(cam, CPIA_COMMAND_GetVPVersion, 0, 0, 0, 0);
@@ -3193,24 +3193,24 @@ static int cpia_open(struct inode *inode, struct file *file)
 		if (!cam->raw_image)
 			goto oops;
 	}
-	
+
 	if (!cam->decompressed_frame.data) {
 		cam->decompressed_frame.data = rvmalloc(CPIA_MAX_FRAME_SIZE);
 		if (!cam->decompressed_frame.data)
 			goto oops;
 	}
-	
+
 	/* open cpia */
 	err = -ENODEV;
 	if (cam->ops->open(cam->lowlevel_data))
 		goto oops;
-	
+
 	/* reset the camera */
 	if ((err = reset_camera(cam)) != 0) {
 		cam->ops->close(cam->lowlevel_data);
 		goto oops;
 	}
-	
+
 	err = -EINTR;
 	if(signal_pending(current))
 		goto oops;
@@ -3224,7 +3224,7 @@ static int cpia_open(struct inode *inode, struct file *file)
 
 	/* init it to something */
 	cam->mmap_kludge = 0;
-	
+
 	++cam->open_count;
 	file->private_data = dev;
 	mutex_unlock(&cam->busy_lock);
@@ -3250,10 +3250,10 @@ static int cpia_close(struct inode *inode, struct file *file)
 	struct cam_data *cam = dev->priv;
 
 	if (cam->ops) {
-	        /* Return ownership of /proc/cpia/videoX to root */
+		/* Return ownership of /proc/cpia/videoX to root */
 		if(cam->proc_entry)
 			cam->proc_entry->uid = 0;
-	
+
 		/* save camera state for later open (developers guide ch 3.5.3) */
 		save_camera_state(cam);
 
@@ -3342,7 +3342,7 @@ static ssize_t cpia_read(struct file *file, char __user *buf,
 		return -EFAULT;
 	}
 	if (copy_to_user(buf, cam->decompressed_frame.data,
-	                cam->decompressed_frame.count)) {
+			cam->decompressed_frame.count)) {
 		DBG("copy_to_user failed\n");
 		mutex_unlock(&cam->busy_lock);
 		return -EFAULT;
@@ -3361,7 +3361,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 
 	if (!cam || !cam->ops)
 		return -ENODEV;
-	
+
 	/* make this _really_ smp-safe */
 	if (mutex_lock_interruptible(&cam->busy_lock))
 		return -EINTR;
@@ -3405,7 +3405,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 		v->norm = 0;
 		break;
 	}
-	
+
 	case VIDIOCSCHAN:
 	{
 		struct video_channel *v = arg;
@@ -3424,7 +3424,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 		*pic = cam->vp;
 		break;
 	}
-	
+
 	case VIDIOCSPICT:
 	{
 		struct video_picture *vp = arg;
@@ -3458,11 +3458,11 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 
 		/* Adjust flicker control if necessary */
 		if(cam->params.flickerControl.allowableOverExposure < 0)
-			cam->params.flickerControl.allowableOverExposure = 
+			cam->params.flickerControl.allowableOverExposure =
 				-find_over_exposure(cam->params.colourParams.brightness);
 		if(cam->params.flickerControl.flickerMode != 0)
 			cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
-		
+
 
 		/* queue command to update camera */
 		cam->cmd_queue |= COMMAND_SETCOLOURPARAMS;
@@ -3482,7 +3482,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 		*vw = cam->vw;
 		break;
 	}
-	
+
 	case VIDIOCSWIN:
 	{
 		/* copy_from_user, check validity, copy to internal structure */
@@ -3514,7 +3514,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 
 			/* video size is changing, reset the subcapture area */
 			memset(&cam->vc, 0, sizeof(cam->vc));
-			
+
 			set_vw_size(cam);
 			DBG("%d / %d\n", cam->vw.width, cam->vw.height);
 			cam->cmd_queue |= COMMAND_SETFORMAT;
@@ -3547,7 +3547,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 			vm->offsets[i] = CPIA_MAX_FRAME_SIZE * i;
 		break;
 	}
-	
+
 	case VIDIOCMCAPTURE:
 	{
 		struct video_mmap *vm = arg;
@@ -3597,7 +3597,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 
 			/* video size is changing, reset the subcapture area */
 			memset(&cam->vc, 0, sizeof(cam->vc));
-			
+
 			set_vw_size(cam);
 			cam->cmd_queue |= COMMAND_SETFORMAT;
 			dispatch_commands(cam);
@@ -3608,7 +3608,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 
 		break;
 	}
-	
+
 	case VIDIOCSYNC:
 	{
 		int *frame = arg;
@@ -3649,7 +3649,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 		*vc = cam->vc;
 
 		break;
-	}	
+	}
 
 	case VIDIOCSCAPTURE:
 	{
@@ -3665,7 +3665,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 			retval = -EINVAL;
 			break;
 		}
-		
+
 		/* Clip to the resolution we can set for the ROI
 		   (every 8 columns and 4 rows) */
 		vc->x      = vc->x      & ~(__u32)7;
@@ -3681,14 +3681,14 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 		}
 
 		DBG("%d,%d/%dx%d\n", vc->x,vc->y,vc->width, vc->height);
-		
+
 		mutex_lock(&cam->param_lock);
-		
+
 		cam->vc.x      = vc->x;
 		cam->vc.y      = vc->y;
 		cam->vc.width  = vc->width;
 		cam->vc.height = vc->height;
-		
+
 		set_vw_size(cam);
 		cam->cmd_queue |= COMMAND_SETFORMAT;
 
@@ -3699,7 +3699,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 		dispatch_commands(cam);
 		break;
 	}
-	
+
 	case VIDIOCGUNIT:
 	{
 		struct video_unit *vu = arg;
@@ -3715,7 +3715,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 		break;
 	}
 
-		
+
 	/* pointless to implement overlay with this camera */
 	case VIDIOCCAPTURE:
 	case VIDIOCGFBUF:
@@ -3738,7 +3738,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 
 	mutex_unlock(&cam->busy_lock);
 	return retval;
-} 
+}
 
 static int cpia_ioctl(struct inode *inode, struct file *file,
 		     unsigned int cmd, unsigned long arg)
@@ -3759,7 +3759,7 @@ static int cpia_mmap(struct file *file, struct vm_area_struct *vma)
 
 	if (!cam || !cam->ops)
 		return -ENODEV;
-	
+
 	DBG("cpia_mmap: %ld\n", size);
 
 	if (size > FRAME_NUM*CPIA_MAX_FRAME_SIZE)
@@ -3767,7 +3767,7 @@ static int cpia_mmap(struct file *file, struct vm_area_struct *vma)
 
 	if (!cam || !cam->ops)
 		return -ENODEV;
-	
+
 	/* make this _really_ smp-safe */
 	if (mutex_lock_interruptible(&cam->busy_lock))
 		return -EINTR;
@@ -3851,11 +3851,11 @@ static void reset_camera_struct(struct cam_data *cam)
 	cam->params.flickerControl.flickerMode = 0;
 	cam->params.flickerControl.disabled = 1;
 
-	cam->params.flickerControl.coarseJump = 
+	cam->params.flickerControl.coarseJump =
 		flicker_jumps[cam->mainsFreq]
-		             [cam->params.sensorFps.baserate]
-		             [cam->params.sensorFps.divisor];
-	cam->params.flickerControl.allowableOverExposure = 
+			     [cam->params.sensorFps.baserate]
+			     [cam->params.sensorFps.divisor];
+	cam->params.flickerControl.allowableOverExposure =
 		-find_over_exposure(cam->params.colourParams.brightness);
 	cam->params.vlOffset.gain1 = 20;
 	cam->params.vlOffset.gain2 = 24;
@@ -3870,21 +3870,21 @@ static void reset_camera_struct(struct cam_data *cam)
 	cam->params.compressionParams.qDiffStepThresh = 3;
 	cam->params.compressionParams.decimationThreshMod = 2;
 	/* End of default values from Software Developer's Guide */
-	
+
 	cam->transfer_rate = 0;
 	cam->exposure_status = EXPOSURE_NORMAL;
-	
+
 	/* Set Sensor FPS to 15fps. This seems better than 30fps
 	 * for indoor lighting. */
 	cam->params.sensorFps.divisor = 1;
 	cam->params.sensorFps.baserate = 1;
-	
+
 	cam->params.yuvThreshold.yThreshold = 6; /* From windows driver */
 	cam->params.yuvThreshold.uvThreshold = 6; /* From windows driver */
-	
+
 	cam->params.format.subSample = SUBSAMPLE_422;
 	cam->params.format.yuvOrder = YUVORDER_YUYV;
-	
+
 	cam->params.compression.mode = CPIA_COMPRESSION_AUTO;
 	cam->params.compressionTarget.frTargeting =
 		CPIA_COMPRESSION_TARGET_QUALITY;
@@ -3898,7 +3898,7 @@ static void reset_camera_struct(struct cam_data *cam)
 	cam->params.qx3.cradled = 0;
 
 	cam->video_size = VIDEOSIZE_CIF;
-	
+
 	cam->vp.colour = 32768;      /* 50% */
 	cam->vp.hue = 32768;         /* 50% */
 	cam->vp.brightness = 32768;  /* 50% */
@@ -3911,7 +3911,7 @@ static void reset_camera_struct(struct cam_data *cam)
 	cam->vc.y = 0;
 	cam->vc.width = 0;
 	cam->vc.height = 0;
-	
+
 	cam->vw.x = 0;
 	cam->vw.y = 0;
 	set_vw_size(cam);
@@ -3928,7 +3928,7 @@ static void reset_camera_struct(struct cam_data *cam)
 
 /* initialize cam_data structure  */
 static void init_camera_struct(struct cam_data *cam,
-                               struct cpia_camera_ops *ops )
+			       struct cpia_camera_ops *ops )
 {
 	int i;
 
@@ -3945,7 +3945,7 @@ static void init_camera_struct(struct cam_data *cam,
 
 	memcpy(&cam->vdev, &cpia_template, sizeof(cpia_template));
 	cam->vdev.priv = cam;
-	
+
 	cam->curframe = 0;
 	for (i = 0; i < FRAME_NUM; i++) {
 		cam->frame[i].width = 0;
@@ -3961,15 +3961,15 @@ static void init_camera_struct(struct cam_data *cam,
 
 struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowlevel)
 {
-        struct cam_data *camera;
-	
+	struct cam_data *camera;
+
 	if ((camera = kmalloc(sizeof(struct cam_data), GFP_KERNEL)) == NULL)
 		return NULL;
 
-	
+
 	init_camera_struct( camera, ops );
 	camera->lowlevel_data = lowlevel;
-	
+
 	/* register v4l device */
 	if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
 		kfree(camera);
@@ -3982,7 +3982,7 @@ struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowleve
 	/* open cpia */
 	if (camera->ops->open(camera->lowlevel_data))
 		return camera;
-	
+
 	/* reset the camera */
 	if (reset_camera(camera) != 0) {
 		camera->ops->close(camera->lowlevel_data);
@@ -4022,11 +4022,11 @@ void cpia_unregister_camera(struct cam_data *cam)
 		DBG("camera open -- setting ops to NULL\n");
 		cam->ops = NULL;
 	}
-	
+
 #ifdef CONFIG_PROC_FS
 	DBG("destroying /proc/cpia/video%d\n", cam->vdev.minor);
 	destroy_proc_cpia_cam(cam);
-#endif	
+#endif
 	if (!cam->open_count) {
 		DBG("freeing camera\n");
 		kfree(cam);
diff --git a/drivers/media/video/cpia.h b/drivers/media/video/cpia.h
index de6678200a57..dde27a6a4a09 100644
--- a/drivers/media/video/cpia.h
+++ b/drivers/media/video/cpia.h
@@ -52,10 +52,10 @@
 struct cpia_camera_ops
 {
 	/* open sets privdata to point to structure for this camera.
-         * Returns negative value on error, otherwise 0.
+	 * Returns negative value on error, otherwise 0.
 	 */
 	int (*open)(void *privdata);
-	
+
 	/* Registers callback function cb to be called with cbdata
 	 * when an image is ready.  If cb is NULL, only single image grabs
 	 * should be used.  cb should immediately call streamRead to read
@@ -63,8 +63,8 @@ struct cpia_camera_ops
 	 * otherwise 0.
 	 */
 	int (*registerCallback)(void *privdata, void (*cb)(void *cbdata),
-	                        void *cbdata);
-	
+				void *cbdata);
+
 	/* transferCmd sends commands to the camera.  command MUST point to
 	 * an  8 byte buffer in kernel space. data can be NULL if no extra
 	 * data is needed.  The size of the data is given by the last 2
@@ -77,30 +77,30 @@ struct cpia_camera_ops
 	 * Returns negative value on error, otherwise 0.
 	 */
 	int (*streamStart)(void *privdata);
-	
+
 	/* streamStop terminates stream capture mode.
 	 * Returns negative value on error, otherwise 0.
 	 */
 	int (*streamStop)(void *privdata);
-        
+
 	/* streamRead reads a frame from the camera.  buffer points to a
-         * buffer large enough to hold a complete frame in kernel space.
-         * noblock indicates if this should be a non blocking read.
+	 * buffer large enough to hold a complete frame in kernel space.
+	 * noblock indicates if this should be a non blocking read.
 	 * Returns the number of bytes read, or negative value on error.
-         */
+	 */
 	int (*streamRead)(void *privdata, u8 *buffer, int noblock);
-	
+
 	/* close disables the device until open() is called again.
 	 * Returns negative value on error, otherwise 0.
 	 */
 	int (*close)(void *privdata);
-	
+
 	/* If wait_for_stream_ready is non-zero, wait until the streamState
 	 * is STREAM_READY before calling streamRead.
 	 */
 	int wait_for_stream_ready;
 
-	/* 
+	/*
 	 * Used to maintain lowlevel module usage counts
 	 */
 	struct module *owner;
@@ -215,14 +215,14 @@ struct cam_params {
 		u8 videoSize;		/* CIF/QCIF */
 		u8 subSample;
 		u8 yuvOrder;
- 	} format;
-        struct {                        /* Intel QX3 specific data */
-                u8 qx3_detected;        /* a QX3 is present */
-                u8 toplight;            /* top light lit , R/W */
-                u8 bottomlight;         /* bottom light lit, R/W */
-                u8 button;              /* snapshot button pressed (R/O) */
-                u8 cradled;             /* microscope is in cradle (R/O) */
-        } qx3;
+	} format;
+	struct {                        /* Intel QX3 specific data */
+		u8 qx3_detected;        /* a QX3 is present */
+		u8 toplight;            /* top light lit , R/W */
+		u8 bottomlight;         /* bottom light lit, R/W */
+		u8 button;              /* snapshot button pressed (R/O) */
+		u8 cradled;             /* microscope is in cradle (R/O) */
+	} qx3;
 	struct {
 		u8 colStart;		/* skip first 8*colStart pixels */
 		u8 colEnd;		/* finish at 8*colEnd pixels */
@@ -247,13 +247,13 @@ enum v4l_camstates {
 struct cam_data {
 	struct list_head cam_data_list;
 
-        struct mutex busy_lock;     /* guard against SMP multithreading */
+	struct mutex busy_lock;     /* guard against SMP multithreading */
 	struct cpia_camera_ops *ops;	/* lowlevel driver operations */
 	void *lowlevel_data;		/* private data for lowlevel driver */
 	u8 *raw_image;			/* buffer for raw image data */
 	struct cpia_frame decompressed_frame;
-                                        /* buffer to hold decompressed frame */
-	int image_size;		        /* sizeof last decompressed image */
+					/* buffer to hold decompressed frame */
+	int image_size;			/* sizeof last decompressed image */
 	int open_count;			/* # of process that have camera open */
 
 				/* camera status */
@@ -265,7 +265,7 @@ struct cam_data {
 	struct mutex param_lock;	/* params lock for this camera */
 	struct cam_params params;	/* camera settings */
 	struct proc_dir_entry *proc_entry;	/* /proc/cpia/videoX */
-	
+
 					/* v4l */
 	int video_size;			/* VIDEO_SIZE_ */
 	volatile enum v4l_camstates camstate;	/* v4l layer status */
@@ -277,7 +277,7 @@ struct cam_data {
 				/* mmap interface */
 	int curframe;			/* the current frame to grab into */
 	u8 *frame_buf;			/* frame buffer data */
-        struct cpia_frame frame[FRAME_NUM];
+	struct cpia_frame frame[FRAME_NUM];
 				/* FRAME_NUM-buffering, so we need a array */
 
 	int first_frame;
@@ -424,7 +424,7 @@ void cpia_unregister_camera(struct cam_data *cam);
 #define DEB_BYTE(p)\
   DBG("%1d %1d %1d %1d %1d %1d %1d %1d \n",\
       (p)&0x80?1:0, (p)&0x40?1:0, (p)&0x20?1:0, (p)&0x10?1:0,\
-        (p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0);
+	(p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0);
 
 #endif /* __KERNEL__ */
 
diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/video/cpia2/cpia2.h
index 95d3afa94a3d..8394283993f6 100644
--- a/drivers/media/video/cpia2/cpia2.h
+++ b/drivers/media/video/cpia2/cpia2.h
@@ -381,7 +381,7 @@ struct cpia2_fh {
 
 struct camera_data {
 	/* locks */
-	struct semaphore busy_lock;	/* guard against SMP multithreading */
+	struct mutex busy_lock;	/* guard against SMP multithreading */
 	struct v4l2_prio_state prio;
 
 	/* camera status */
diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c
index 5dfb242d5b8c..fd771c7a2fe2 100644
--- a/drivers/media/video/cpia2/cpia2_core.c
+++ b/drivers/media/video/cpia2/cpia2_core.c
@@ -2238,7 +2238,7 @@ struct camera_data *cpia2_init_camera_struct(void)
 	memset(cam, 0, sizeof(struct camera_data));
 
 	cam->present = 1;
-	init_MUTEX(&cam->busy_lock);
+	mutex_init(&cam->busy_lock);
 	init_waitqueue_head(&cam->wq_stream);
 
 	return cam;
@@ -2371,12 +2371,12 @@ long cpia2_read(struct camera_data *cam,
 	}
 
 	/* make this _really_ smp and multithread-safe */
-	if (down_interruptible(&cam->busy_lock))
+	if (mutex_lock_interruptible(&cam->busy_lock))
 		return -ERESTARTSYS;
 
 	if (!cam->present) {
 		LOG("%s: camera removed\n",__FUNCTION__);
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		return 0;	/* EOF */
 	}
 
@@ -2389,34 +2389,34 @@ long cpia2_read(struct camera_data *cam,
 	/* Copy cam->curbuff in case it changes while we're processing */
 	frame = cam->curbuff;
 	if (noblock && frame->status != FRAME_READY) {
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		return -EAGAIN;
 	}
 
 	if(frame->status != FRAME_READY) {
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		wait_event_interruptible(cam->wq_stream,
 			       !cam->present ||
 			       (frame = cam->curbuff)->status == FRAME_READY);
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 		/* make this _really_ smp and multithread-safe */
-		if (down_interruptible(&cam->busy_lock)) {
+		if (mutex_lock_interruptible(&cam->busy_lock)) {
 			return -ERESTARTSYS;
 		}
 		if(!cam->present) {
-			up(&cam->busy_lock);
+			mutex_unlock(&cam->busy_lock);
 			return 0;
 		}
 	}
 
 	/* copy data to user space */
 	if (frame->length > count) {
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		return -EFAULT;
 	}
 	if (copy_to_user(buf, frame->data, frame->length)) {
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		return -EFAULT;
 	}
 
@@ -2424,7 +2424,7 @@ long cpia2_read(struct camera_data *cam,
 
 	frame->status = FRAME_EMPTY;
 
-	up(&cam->busy_lock);
+	mutex_unlock(&cam->busy_lock);
 	return count;
 }
 
@@ -2443,10 +2443,10 @@ unsigned int cpia2_poll(struct camera_data *cam, struct file *filp,
 		return POLLERR;
 	}
 
-	down(&cam->busy_lock);
+	mutex_lock(&cam->busy_lock);
 
 	if(!cam->present) {
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		return POLLHUP;
 	}
 
@@ -2456,16 +2456,16 @@ unsigned int cpia2_poll(struct camera_data *cam, struct file *filp,
 				       cam->params.camera_state.stream_mode);
 	}
 
-	up(&cam->busy_lock);
+	mutex_unlock(&cam->busy_lock);
 	poll_wait(filp, &cam->wq_stream, wait);
-	down(&cam->busy_lock);
+	mutex_lock(&cam->busy_lock);
 
 	if(!cam->present)
 		status = POLLHUP;
 	else if(cam->curbuff->status == FRAME_READY)
 		status = POLLIN | POLLRDNORM;
 
-	up(&cam->busy_lock);
+	mutex_unlock(&cam->busy_lock);
 	return status;
 }
 
@@ -2488,18 +2488,18 @@ int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma)
 	DBG("mmap offset:%ld size:%ld\n", start_offset, size);
 
 	/* make this _really_ smp-safe */
-	if (down_interruptible(&cam->busy_lock))
+	if (mutex_lock_interruptible(&cam->busy_lock))
 		return -ERESTARTSYS;
 
 	if (!cam->present) {
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		return -ENODEV;
 	}
 
 	if (size > cam->frame_size*cam->num_frames  ||
 	    (start_offset % cam->frame_size) != 0 ||
 	    (start_offset+size > cam->frame_size*cam->num_frames)) {
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		return -EINVAL;
 	}
 
@@ -2507,7 +2507,7 @@ int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma)
 	while (size > 0) {
 		page = kvirt_to_pa(pos);
 		if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, PAGE_SIZE, PAGE_SHARED)) {
-			up(&cam->busy_lock);
+			mutex_unlock(&cam->busy_lock);
 			return -EAGAIN;
 		}
 		start += PAGE_SIZE;
@@ -2519,7 +2519,7 @@ int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma)
 	}
 
 	cam->mmapped = true;
-	up(&cam->busy_lock);
+	mutex_unlock(&cam->busy_lock);
 	return 0;
 }
 
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 08f8be345fa8..481e178ef56d 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -255,7 +255,7 @@ static int cpia2_open(struct inode *inode, struct file *file)
 		return -ENODEV;
 	}
 
-	if(down_interruptible(&cam->busy_lock))
+	if(mutex_lock_interruptible(&cam->busy_lock))
 		return -ERESTARTSYS;
 
 	if(!cam->present) {
@@ -299,7 +299,7 @@ skip_init:
 	cpia2_dbg_dump_registers(cam);
 
 err_return:
-	up(&cam->busy_lock);
+	mutex_unlock(&cam->busy_lock);
 	return retval;
 }
 
@@ -314,7 +314,7 @@ static int cpia2_close(struct inode *inode, struct file *file)
 	struct camera_data *cam = video_get_drvdata(dev);
 	struct cpia2_fh *fh = file->private_data;
 
-	down(&cam->busy_lock);
+	mutex_lock(&cam->busy_lock);
 
 	if (cam->present &&
 	    (cam->open_count == 1
@@ -347,7 +347,7 @@ static int cpia2_close(struct inode *inode, struct file *file)
 		}
 	}
 
-	up(&cam->busy_lock);
+	mutex_unlock(&cam->busy_lock);
 
 	return 0;
 }
@@ -523,11 +523,11 @@ static int sync(struct camera_data *cam, int frame_nr)
 			return 0;
 		}
 
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		wait_event_interruptible(cam->wq_stream,
 					 !cam->streaming ||
 					 frame->status == FRAME_READY);
-		down(&cam->busy_lock);
+		mutex_lock(&cam->busy_lock);
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 		if(!cam->present)
@@ -1544,11 +1544,11 @@ static int ioctl_dqbuf(void *arg,struct camera_data *cam, struct file *file)
 	if(frame < 0) {
 		/* Wait for a frame to become available */
 		struct framebuf *cb=cam->curbuff;
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		wait_event_interruptible(cam->wq_stream,
 					 !cam->present ||
 					 (cb=cam->curbuff)->status == FRAME_READY);
-		down(&cam->busy_lock);
+		mutex_lock(&cam->busy_lock);
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 		if(!cam->present)
@@ -1591,11 +1591,11 @@ static int cpia2_do_ioctl(struct inode *inode, struct file *file,
 		return -ENOTTY;
 
 	/* make this _really_ smp-safe */
-	if (down_interruptible(&cam->busy_lock))
+	if (mutex_lock_interruptible(&cam->busy_lock))
 		return -ERESTARTSYS;
 
 	if (!cam->present) {
-		up(&cam->busy_lock);
+		mutex_unlock(&cam->busy_lock);
 		return -ENODEV;
 	}
 
@@ -1608,7 +1608,7 @@ static int cpia2_do_ioctl(struct inode *inode, struct file *file,
 		struct cpia2_fh *fh = file->private_data;
 		retval = v4l2_prio_check(&cam->prio, &fh->prio);
 		if(retval) {
-			up(&cam->busy_lock);
+			mutex_unlock(&cam->busy_lock);
 			return retval;
 		}
 		break;
@@ -1618,7 +1618,7 @@ static int cpia2_do_ioctl(struct inode *inode, struct file *file,
 	{
 		struct cpia2_fh *fh = file->private_data;
 		if(fh->prio != V4L2_PRIORITY_RECORD) {
-			up(&cam->busy_lock);
+			mutex_unlock(&cam->busy_lock);
 			return -EBUSY;
 		}
 		break;
@@ -1847,7 +1847,7 @@ static int cpia2_do_ioctl(struct inode *inode, struct file *file,
 		break;
 	}
 
-	up(&cam->busy_lock);
+	mutex_unlock(&cam->busy_lock);
 	return retval;
 }
 
@@ -1924,14 +1924,15 @@ static void reset_camera_struct_v4l(struct camera_data *cam)
  * The v4l video device structure initialized for this device
  ***/
 static struct file_operations fops_template = {
-	.owner=      THIS_MODULE,
-	.open=       cpia2_open,
-	.release=    cpia2_close,
-	.read=       cpia2_v4l_read,
-	.poll=       cpia2_v4l_poll,
-	.ioctl=      cpia2_ioctl,
-	.llseek=     no_llseek,
-	.mmap=       cpia2_mmap,
+	.owner		= THIS_MODULE,
+	.open		= cpia2_open,
+	.release	= cpia2_close,
+	.read		= cpia2_v4l_read,
+	.poll		= cpia2_v4l_poll,
+	.ioctl		= cpia2_ioctl,
+	.llseek		= no_llseek,
+	.compat_ioctl	= v4l_compat_ioctl32,
+	.mmap		= cpia2_mmap,
 };
 
 static struct video_device cpia2_template = {
diff --git a/drivers/media/video/cpia_pp.c b/drivers/media/video/cpia_pp.c
index 74cff626e044..3021f21aae36 100644
--- a/drivers/media/video/cpia_pp.c
+++ b/drivers/media/video/cpia_pp.c
@@ -23,7 +23,7 @@
  */
 
 /* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */  
+/* #define _CPIA_DEBUG_  1 */
 
 #include <linux/config.h>
 
@@ -45,7 +45,7 @@
 
 static int cpia_pp_open(void *privdata);
 static int cpia_pp_registerCallback(void *privdata, void (*cb) (void *cbdata),
-                                    void *cbdata);
+				    void *cbdata);
 static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data);
 static int cpia_pp_streamStart(void *privdata);
 static int cpia_pp_streamStop(void *privdata);
@@ -93,7 +93,7 @@ struct pp_cam_entry {
 	int stream_irq;
 };
 
-static struct cpia_camera_ops cpia_pp_ops = 
+static struct cpia_camera_ops cpia_pp_ops =
 {
 	cpia_pp_open,
 	cpia_pp_registerCallback,
@@ -123,7 +123,7 @@ static void cpia_parport_disable_irq( struct parport *port ) {
 }
 
 /* Special CPiA PPC modes: These are invoked by using the 1284 Extensibility
- * Link Flag during negotiation */  
+ * Link Flag during negotiation */
 #define UPLOAD_FLAG  0x08
 #define NIBBLE_TRANSFER 0x01
 #define ECP_TRANSFER 0x03
@@ -139,17 +139,17 @@ static void cpia_parport_disable_irq( struct parport *port ) {
 /*  CPiA nonstandard "Nibble" mode (no nDataAvail signal after each byte). */
 /* The standard kernel parport_ieee1284_read_nibble() fails with the CPiA... */
 
-static size_t cpia_read_nibble (struct parport *port, 
-			 void *buffer, size_t len, 
+static size_t cpia_read_nibble (struct parport *port,
+			 void *buffer, size_t len,
 			 int flags)
 {
-	/* adapted verbatim, with one change, from 
+	/* adapted verbatim, with one change, from
 	   parport_ieee1284_read_nibble() in drivers/parport/ieee1284-ops.c */
 
 	unsigned char *buf = buffer;
 	int i;
 	unsigned char byte = 0;
-	
+
 	len *= 2; /* in nibbles */
 	for (i=0; i < len; i++) {
 		unsigned char nibble;
@@ -158,12 +158,12 @@ static size_t cpia_read_nibble (struct parport *port,
 		 * after every second nibble to signal that more
 		 * data is available.  (the total number of Bytes that
 		 * should be sent is known; if too few are received, an error
-		 * will be recorded after a timeout).  
+		 * will be recorded after a timeout).
 		 * This is incompatible with parport_ieee1284_read_nibble(),
 		 * which expects to find nFault LO after every second nibble.
 		 */
 
-		/* Solution: modify cpia_read_nibble to only check for 
+		/* Solution: modify cpia_read_nibble to only check for
 		 * nDataAvail before the first nibble is sent.
 		 */
 
@@ -216,7 +216,7 @@ static size_t cpia_read_nibble (struct parport *port,
 			/* Second nibble */
 			byte |= nibble << 4;
 			*buf++ = byte;
-		} else 
+		} else
 			byte = nibble;
 	}
 
@@ -238,18 +238,18 @@ static size_t cpia_read_nibble (struct parport *port,
 }
 
 /* CPiA nonstandard "Nibble Stream" mode (2 nibbles per cycle, instead of 1)
- * (See CPiA Data sheet p. 31) 
- * 
- * "Nibble Stream" mode used by CPiA for uploads to non-ECP ports is a 
- * nonstandard variant of nibble mode which allows the same (mediocre) 
- * data flow of 8 bits per cycle as software-enabled ECP by TRISTATE-capable 
+ * (See CPiA Data sheet p. 31)
+ *
+ * "Nibble Stream" mode used by CPiA for uploads to non-ECP ports is a
+ * nonstandard variant of nibble mode which allows the same (mediocre)
+ * data flow of 8 bits per cycle as software-enabled ECP by TRISTATE-capable
  * parallel ports, but works also for  non-TRISTATE-capable ports.
  * (Standard nibble mode only send 4 bits per cycle)
  *
  */
 
-static size_t cpia_read_nibble_stream(struct parport *port, 
-			       void *buffer, size_t len, 
+static size_t cpia_read_nibble_stream(struct parport *port,
+			       void *buffer, size_t len,
 			       int flags)
 {
 	int i;
@@ -260,7 +260,7 @@ static size_t cpia_read_nibble_stream(struct parport *port,
 		unsigned char nibble[2], byte = 0;
 		int j;
 
-		/* Image Data is complete when 4 consecutive EOI bytes (0xff) are seen */ 
+		/* Image Data is complete when 4 consecutive EOI bytes (0xff) are seen */
 		if (endseen > 3 )
 			break;
 
@@ -268,7 +268,7 @@ static size_t cpia_read_nibble_stream(struct parport *port,
 		parport_frob_control (port,
 				      PARPORT_CONTROL_AUTOFD,
 				      PARPORT_CONTROL_AUTOFD);
-		
+
 		/* Event 9: nAck goes low. */
 		port->ieee1284.phase = IEEE1284_PH_REV_DATA;
 		if (parport_wait_peripheral (port,
@@ -282,7 +282,7 @@ static size_t cpia_read_nibble_stream(struct parport *port,
 
 		/* Read lower nibble */
 		nibble[0] = parport_read_status (port) >>3;
-		
+
 		/* Event 10: Set nAutoFd high. */
 		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
 
@@ -295,10 +295,10 @@ static size_t cpia_read_nibble_stream(struct parport *port,
 				 port->name);
 			break;
 		}
-		
+
 		/* Read upper nibble */
 		nibble[1] = parport_read_status (port) >>3;
-		
+
 		/* reassemble the byte */
 		for (j = 0; j < 2 ; j++ ) {
 			nibble[j] &= ~8;
@@ -335,8 +335,8 @@ static void EndTransferMode(struct pp_cam_entry *cam)
 static int ForwardSetup(struct pp_cam_entry *cam)
 {
 	int retry;
-	
-	/* The CPiA uses ECP protocol for Downloads from the Host to the camera. 
+
+	/* The CPiA uses ECP protocol for Downloads from the Host to the camera.
 	 * This will be software-emulated if ECP hardware is not present
 	 */
 
@@ -375,9 +375,9 @@ static int ReverseSetup(struct pp_cam_entry *cam, int extensibility)
 	upload_mode = mode;
 	if(extensibility) mode = UPLOAD_FLAG|transfer_mode|IEEE1284_EXT_LINK;
 
-	/* the usual camera maximum response time is 10ms, but after 
+	/* the usual camera maximum response time is 10ms, but after
 	 * receiving some commands, it needs up to 40ms. */
-		
+
 	for(retry = 0; retry < 4; ++retry) {
 		if(!parport_negotiate(cam->port, mode)) {
 			break;
@@ -439,10 +439,10 @@ static int ReadPacket(struct pp_cam_entry *cam, u8 *packet, size_t size)
 
 	/* support for CPiA variant nibble reads */
 	if(cam->port->ieee1284.mode == IEEE1284_MODE_NIBBLE) {
-		if(cpia_read_nibble(cam->port, packet, size, 0) != size) 
-			retval = -EIO;			
+		if(cpia_read_nibble(cam->port, packet, size, 0) != size)
+			retval = -EIO;
 	} else {
-		if(parport_read(cam->port, packet, size) != size) 
+		if(parport_read(cam->port, packet, size) != size)
 			retval = -EIO;
 	}
 	EndTransferMode(cam);
@@ -542,18 +542,18 @@ static int cpia_pp_streamRead(void *privdata, u8 *buffer, int noblock)
 	block_size = PARPORT_CHUNK_SIZE;
 	while( !cam->image_complete ) {
 		cond_resched();
-		
+
 		new_bytes = cpia_pp_read(cam->port, buffer, block_size );
 		if( new_bytes <= 0 ) {
 			break;
 		}
 		i=-1;
 		while(++i<new_bytes && endseen<4) {
-	        	if(*buffer==EOI) {
-	                	endseen++;
-	                } else {
-	                	endseen=0;
-	                }
+			if(*buffer==EOI) {
+				endseen++;
+			} else {
+				endseen=0;
+			}
 			buffer++;
 		}
 		read_bytes += i;
@@ -601,7 +601,7 @@ static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data)
 		}
 		if((err = ReadPacket(cam, buffer, 8)) < 0) {
 			DBG("Error reading command result\n");
-                       return err;
+		       return err;
 		}
 		memcpy(data, buffer, databytes);
 	} else if(command[0] == DATA_OUT) {
@@ -631,10 +631,10 @@ static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data)
 static int cpia_pp_open(void *privdata)
 {
 	struct pp_cam_entry *cam = (struct pp_cam_entry *)privdata;
-	
+
 	if (cam == NULL)
 		return -EINVAL;
-	
+
 	if(cam->open_count == 0) {
 		if (parport_claim(cam->pdev)) {
 			DBG("failed to claim the port\n");
@@ -645,12 +645,12 @@ static int cpia_pp_open(void *privdata)
 		parport_write_control(cam->port, PARPORT_CONTROL_SELECT);
 		udelay(50);
 		parport_write_control(cam->port,
-		                      PARPORT_CONTROL_SELECT
-		                      | PARPORT_CONTROL_INIT);
+				      PARPORT_CONTROL_SELECT
+				      | PARPORT_CONTROL_INIT);
 	}
-	
+
 	++cam->open_count;
-	
+
 	return 0;
 }
 
@@ -663,7 +663,7 @@ static int cpia_pp_registerCallback(void *privdata, void (*cb)(void *cbdata), vo
 {
 	struct pp_cam_entry *cam = privdata;
 	int retval = 0;
-	
+
 	if(cam->port->irq != PARPORT_IRQ_NONE) {
 		INIT_WORK(&cam->cb_task, cb, cbdata);
 	} else {
@@ -707,9 +707,9 @@ static int cpia_pp_register(struct parport *port)
 		LOG("failed to allocate camera structure\n");
 		return -ENOMEM;
 	}
-	
+
 	pdev = parport_register_device(port, "cpia_pp", NULL, NULL,
-	                               NULL, 0, cam);
+				       NULL, 0, cam);
 
 	if (!pdev) {
 		LOG("failed to parport_register_device\n");
@@ -753,19 +753,19 @@ static void cpia_pp_detach (struct parport *port)
 		}
 		cpia = NULL;
 	}
-	spin_unlock( &cam_list_lock_pp );			
+	spin_unlock( &cam_list_lock_pp );
 
 	if (!cpia) {
 		DBG("cpia_pp_detach failed to find cam_data in cam_list\n");
 		return;
 	}
-	
-	cam = (struct pp_cam_entry *) cpia->lowlevel_data;	
+
+	cam = (struct pp_cam_entry *) cpia->lowlevel_data;
 	cpia_unregister_camera(cpia);
-	if(cam->open_count > 0) 
+	if(cam->open_count > 0)
 		cpia_pp_close(cam);
 	parport_unregister_device(cam->pdev);
-	cpia->lowlevel_data = NULL;	
+	cpia->lowlevel_data = NULL;
 	kfree(cam);
 }
 
@@ -805,14 +805,14 @@ static struct parport_driver cpia_pp_driver = {
 
 int cpia_pp_init(void)
 {
-	printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT, 
+	printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
 	       CPIA_PP_MAJ_VER,CPIA_PP_MIN_VER,CPIA_PP_PATCH_VER);
 
 	if(parport_nr[0] == PPCPIA_PARPORT_OFF) {
 		printk("  disabled\n");
 		return 0;
 	}
-	
+
 	spin_lock_init( &cam_list_lock_pp );
 
 	if (parport_register_driver (&cpia_pp_driver)) {
diff --git a/drivers/media/video/cpia_usb.c b/drivers/media/video/cpia_usb.c
index 03275c37c5d3..9c49a4b00116 100644
--- a/drivers/media/video/cpia_usb.c
+++ b/drivers/media/video/cpia_usb.c
@@ -22,7 +22,7 @@
  */
 
 /* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */  
+/* #define _CPIA_DEBUG_  1 */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -85,7 +85,7 @@ struct usb_cpia {
 
 static int cpia_usb_open(void *privdata);
 static int cpia_usb_registerCallback(void *privdata, void (*cb) (void *cbdata),
-			             void *cbdata);
+				     void *cbdata);
 static int cpia_usb_transferCmd(void *privdata, u8 *command, u8 *data);
 static int cpia_usb_streamStart(void *privdata);
 static int cpia_usb_streamStop(void *privdata);
@@ -127,7 +127,7 @@ static void cpia_usb_complete(struct urb *urb, struct pt_regs *regs)
 		ucpia->workbuff->status = FRAME_READING;
 		ucpia->workbuff->length = 0;
 	}
- 		  
+
 	for (i = 0; i < urb->number_of_packets; i++) {
 		int n = urb->iso_frame_desc[i].actual_length;
 		int st = urb->iso_frame_desc[i].status;
@@ -141,9 +141,9 @@ static void cpia_usb_complete(struct urb *urb, struct pt_regs *regs)
 			printk(KERN_DEBUG "cpia: scratch buf overflow!scr_len: %d, n: %d\n", ucpia->workbuff->length, n);
 			return;
 		}
-	    
+
 		if (n) {
-			if ((ucpia->workbuff->length > 0) || 
+			if ((ucpia->workbuff->length > 0) ||
 			    (0x19 == cdata[0] && 0x68 == cdata[1])) {
 				memcpy(ucpia->workbuff->data + ucpia->workbuff->length, cdata, n);
 				ucpia->workbuff->length += n;
@@ -160,7 +160,7 @@ static void cpia_usb_complete(struct urb *urb, struct pt_regs *regs)
 				ucpia->workbuff = ucpia->workbuff->next;
 				ucpia->workbuff->status = FRAME_EMPTY;
 				ucpia->workbuff->length = 0;
-		  
+
 				if (waitqueue_active(&ucpia->wq_stream))
 					wake_up_interruptible(&ucpia->wq_stream);
 			}
@@ -178,7 +178,7 @@ static int cpia_usb_open(void *privdata)
 	struct usb_cpia *ucpia = (struct usb_cpia *) privdata;
 	struct urb *urb;
 	int ret, retval = 0, fx, err;
-  
+
 	if (!ucpia)
 		return -EINVAL;
 
@@ -191,7 +191,7 @@ static int cpia_usb_open(void *privdata)
 		retval = -EINVAL;
 		goto error_0;
 	}
-	
+
 	ret = usb_set_interface(ucpia->dev, ucpia->iface, 3);
 	if (ret < 0) {
 		printk(KERN_ERR "cpia_usb_open: usb_set_interface error (ret = %d)\n", ret);
@@ -286,7 +286,7 @@ error_1:
 error_0:
 	kfree (ucpia->sbuf[0].data);
 	ucpia->sbuf[0].data = NULL;
-	
+
 	return retval;
 }
 
@@ -307,7 +307,7 @@ static int WritePacket(struct usb_device *udev, const u8 *packet, u8 *buf, size_
 	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			 packet[1] + (packet[0] << 8),
 			 USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			 packet[2] + (packet[3] << 8), 
+			 packet[2] + (packet[3] << 8),
 			 packet[4] + (packet[5] << 8), buf, size, 1000);
 }
 
@@ -324,7 +324,7 @@ static int ReadPacket(struct usb_device *udev, u8 *packet, u8 *buf, size_t size)
 	return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 			 packet[1] + (packet[0] << 8),
 			 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			 packet[2] + (packet[3] << 8), 
+			 packet[2] + (packet[3] << 8),
 			 packet[4] + (packet[5] << 8), buf, size, 1000);
 }
 
@@ -393,7 +393,7 @@ static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock)
 
 	if (!ucpia || !ucpia->present)
 		return -1;
-  
+
 	if (ucpia->curbuff->status != FRAME_READY)
 		interruptible_sleep_on(&ucpia->wq_stream);
 	else
@@ -403,7 +403,7 @@ static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock)
 
 	if (!mybuff)
 		return -1;
-  
+
 	if (mybuff->status != FRAME_READY || mybuff->length < 4) {
 		DBG("Something went wrong!\n");
 		return -1;
@@ -411,7 +411,7 @@ static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock)
 
 	memcpy(frame, mybuff->data, mybuff->length);
 	mybuff->status = FRAME_EMPTY;
-  
+
 /*   DBG("read done, %d bytes, Header: %x/%x, Footer: %x%x%x%x\n",  */
 /*       mybuff->length, frame[0], frame[1], */
 /*       frame[mybuff->length-4], frame[mybuff->length-3],  */
@@ -447,7 +447,7 @@ static void cpia_usb_free_resources(struct usb_cpia *ucpia, int try)
 
 	kfree(ucpia->sbuf[1].data);
 	ucpia->sbuf[1].data = NULL;
- 
+
 	if (ucpia->sbuf[0].urb) {
 		usb_kill_urb(ucpia->sbuf[0].urb);
 		usb_free_urb(ucpia->sbuf[0].urb);
@@ -490,7 +490,7 @@ static int cpia_probe(struct usb_interface *intf,
 	struct usb_cpia *ucpia;
 	struct cam_data *cam;
 	int ret;
-  
+
 	/* A multi-config CPiA camera? */
 	if (udev->descriptor.bNumConfigurations != 1)
 		return -ENODEV;
@@ -539,7 +539,7 @@ static int cpia_probe(struct usb_interface *intf,
 
 	/* Before register_camera, important */
 	ucpia->present = 1;
-  
+
 	cam = cpia_register_camera(&cpia_usb_ops, ucpia);
 	if (!cam) {
 		LOG("failed to cpia_register_camera\n");
@@ -591,7 +591,7 @@ static void cpia_disconnect(struct usb_interface *intf)
 	struct cam_data *cam = usb_get_intfdata(intf);
 	struct usb_cpia *ucpia;
 	struct usb_device *udev;
-  
+
 	usb_set_intfdata(intf, NULL);
 	if (!cam)
 		return;
@@ -600,7 +600,7 @@ static void cpia_disconnect(struct usb_interface *intf)
 	spin_lock( &cam_list_lock_usb );
 	list_del(&cam->cam_data_list);
 	spin_unlock( &cam_list_lock_usb );
-	
+
 	ucpia->present = 0;
 
 	cpia_unregister_camera(cam);
@@ -631,7 +631,7 @@ static void cpia_disconnect(struct usb_interface *intf)
 
 static int __init usb_cpia_init(void)
 {
-	printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT, 
+	printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
 	       CPIA_USB_MAJ_VER,CPIA_USB_MIN_VER,CPIA_USB_PATCH_VER);
 
 	spin_lock_init(&cam_list_lock_usb);
diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c
index 8739c64785ef..de87247c74ee 100644
--- a/drivers/media/video/cs53l32a.c
+++ b/drivers/media/video/cs53l32a.c
@@ -59,25 +59,25 @@ static int cs53l32a_read(struct i2c_client *client, u8 reg)
 static int cs53l32a_command(struct i2c_client *client, unsigned int cmd,
 			    void *arg)
 {
-	struct v4l2_audio *input = arg;
+	struct v4l2_routing *route = arg;
 	struct v4l2_control *ctrl = arg;
 
 	switch (cmd) {
-	case VIDIOC_S_AUDIO:
+	case VIDIOC_INT_G_AUDIO_ROUTING:
+		route->input = (cs53l32a_read(client, 0x01) >> 4) & 3;
+		route->output = 0;
+		break;
+
+	case VIDIOC_INT_S_AUDIO_ROUTING:
 		/* There are 2 physical inputs, but the second input can be
 		   placed in two modes, the first mode bypasses the PGA (gain),
 		   the second goes through the PGA. Hence there are three
 		   possible inputs to choose from. */
-		if (input->index > 2) {
-			v4l_err(client, "Invalid input %d.\n", input->index);
+		if (route->input > 2) {
+			v4l_err(client, "Invalid input %d.\n", route->input);
 			return -EINVAL;
 		}
-		cs53l32a_write(client, 0x01, 0x01 + (input->index << 4));
-		break;
-
-	case VIDIOC_G_AUDIO:
-		memset(input, 0, sizeof(*input));
-		input->index = (cs53l32a_read(client, 0x01) >> 4) & 3;
+		cs53l32a_write(client, 0x01, 0x01 + (route->input << 4));
 		break;
 
 	case VIDIOC_G_CTRL:
diff --git a/drivers/media/video/cs8420.h b/drivers/media/video/cs8420.h
index 2b22f3a38de5..621c0c6678ea 100644
--- a/drivers/media/video/cs8420.h
+++ b/drivers/media/video/cs8420.h
@@ -20,7 +20,7 @@
 #define __CS8420_H__
 
 /* Initialization Sequence */
-	 
+
 static __u8 init8420[] = {
 	1, 0x01,	2, 0x02,	3, 0x00,	4, 0x46,
 	5, 0x24,	6, 0x84,	18, 0x18,	19, 0x13,
diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c
index cb9a7981e408..a4540e858f21 100644
--- a/drivers/media/video/cx25840/cx25840-audio.c
+++ b/drivers/media/video/cx25840/cx25840-audio.c
@@ -18,7 +18,6 @@
 
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 
 #include "cx25840.h"
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 8a257978056f..a65b3cc4bf03 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -31,7 +31,6 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 
 #include "cx25840.h"
@@ -176,9 +175,9 @@ static void cx25840_initialize(struct i2c_client *client, int loadfw)
 	cx25840_write(client, 0x4a5, 0x00);
 	cx25840_write(client, 0x402, 0x00);
 	/* 8. */
-	cx25840_write(client, 0x401, 0x18);
-	cx25840_write(client, 0x4a2, 0x10);
-	cx25840_write(client, 0x402, 0x04);
+	cx25840_and_or(client, 0x401, ~0x18, 0);
+	cx25840_and_or(client, 0x4a2, ~0x10, 0x10);
+	/* steps 8c and 8d are done in change_input() */
 	/* 10. */
 	cx25840_write(client, 0x8d3, 0x1f);
 	cx25840_write(client, 0x8e3, 0x03);
@@ -209,6 +208,17 @@ static void input_change(struct i2c_client *client)
 	struct cx25840_state *state = i2c_get_clientdata(client);
 	v4l2_std_id std = cx25840_get_v4lstd(client);
 
+	/* Follow step 8c and 8d of section 3.16 in the cx25840 datasheet */
+	if (std & V4L2_STD_SECAM) {
+		cx25840_write(client, 0x402, 0);
+	}
+	else {
+		cx25840_write(client, 0x402, 0x04);
+		cx25840_write(client, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
+	}
+	cx25840_and_or(client, 0x401, ~0x60, 0);
+	cx25840_and_or(client, 0x401, ~0x60, 0x60);
+
 	/* Note: perhaps V4L2_STD_PAL_M should be handled as V4L2_STD_NTSC
 	   instead of V4L2_STD_PAL. Someone needs to test this. */
 	if (std & V4L2_STD_PAL) {
@@ -343,6 +353,15 @@ static int set_v4lstd(struct i2c_client *client, v4l2_std_id std)
 		}
 	}
 
+	/* Follow step 9 of section 3.16 in the cx25840 datasheet.
+	   Without this PAL may display a vertical ghosting effect.
+	   This happens for example with the Yuan MPC622. */
+	if (fmt >= 4 && fmt < 8) {
+		/* Set format to NTSC-M */
+		cx25840_and_or(client, 0x400, ~0xf, 1);
+		/* Turn off LCOMB */
+		cx25840_and_or(client, 0x47b, ~6, 0);
+	}
 	cx25840_and_or(client, 0x400, ~0xf, fmt);
 	cx25840_vbi_setup(client);
 	return 0;
@@ -359,7 +378,14 @@ v4l2_std_id cx25840_get_v4lstd(struct i2c_client * client)
 	}
 
 	switch (fmt) {
-	case 0x1: return V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR;
+	case 0x1:
+	{
+		/* if the audio std is A2-M, then this is the South Korean
+		   NTSC standard */
+		if (cx25840_read(client, 0x805) == 2)
+			return V4L2_STD_NTSC_M_KR;
+		return V4L2_STD_NTSC_M;
+	}
 	case 0x2: return V4L2_STD_NTSC_M_JP;
 	case 0x3: return V4L2_STD_NTSC_443;
 	case 0x4: return V4L2_STD_PAL;
@@ -737,16 +763,6 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd,
 		return set_input(client, state->vid_input, input->index);
 	}
 
-	case VIDIOC_G_AUDIO:
-	{
-		struct v4l2_audio *input = arg;
-
-		memset(input, 0, sizeof(*input));
-		input->index = state->aud_input;
-		input->capability = V4L2_AUDCAP_STEREO;
-		break;
-	}
-
 	case VIDIOC_S_FREQUENCY:
 		input_change(client);
 		break;
@@ -794,13 +810,14 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd,
 			   bilingual -> lang1 */
 			cx25840_and_or(client, 0x809, ~0xf, 0x00);
 			break;
+		case V4L2_TUNER_MODE_STEREO:
 		case V4L2_TUNER_MODE_LANG1:
 			/* mono      -> mono
 			   stereo    -> stereo
 			   bilingual -> lang1 */
 			cx25840_and_or(client, 0x809, ~0xf, 0x04);
 			break;
-		case V4L2_TUNER_MODE_STEREO:
+		case V4L2_TUNER_MODE_LANG1_LANG2:
 			/* mono      -> mono
 			   stereo    -> stereo
 			   bilingual -> lang1/lang2 */
@@ -808,7 +825,7 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd,
 			break;
 		case V4L2_TUNER_MODE_LANG2:
 			/* mono      -> mono
-			   stereo    ->stereo
+			   stereo    -> stereo
 			   bilingual -> lang2 */
 			cx25840_and_or(client, 0x809, ~0xf, 0x01);
 			break;
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index e140996e6ee4..ff0f72340d69 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -16,12 +16,13 @@ config VIDEO_CX88
 	  module will be called cx8800
 
 config VIDEO_CX88_ALSA
-	tristate "ALSA DMA audio support"
+	tristate "Conexant 2388x DMA audio support"
 	depends on VIDEO_CX88 && SND && EXPERIMENTAL
 	select SND_PCM
 	---help---
 	  This is a video4linux driver for direct (DMA) audio on
-	  Conexant 2388x based TV cards.
+	  Conexant 2388x based TV cards using ALSA.
+
 	  It only works with boards with function 01 enabled.
 	  To check if your board supports, use lspci -n.
 	  If supported, you should see 1471:8801 or 1471:8811
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 3170b8f72c68..f9d87b86492c 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -303,7 +303,7 @@ static int dsp_buffer_free(snd_cx88_card_t *chip)
 	BUG_ON(!chip->dma_size);
 
 	dprintk(2,"Freeing buffer\n");
-	videobuf_dma_pci_unmap(chip->pci, &chip->dma_risc);
+	videobuf_pci_dma_unmap(chip->pci, &chip->dma_risc);
 	videobuf_dma_free(&chip->dma_risc);
 	btcx_riscmem_free(chip->pci,&chip->buf->risc);
 	kfree(chip->buf);
@@ -429,7 +429,7 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream,
 	videobuf_dma_init_kernel(&buf->vb.dma,PCI_DMA_FROMDEVICE,
 			(PAGE_ALIGN(buf->vb.size) >> PAGE_SHIFT));
 
-	videobuf_dma_pci_map(chip->pci,&buf->vb.dma);
+	videobuf_pci_dma_map(chip->pci,&buf->vb.dma);
 
 
 	cx88_risc_databuffer(chip->pci, &buf->risc,
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index a502a4d6e4ae..e100d8ef369a 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -1341,7 +1341,7 @@ bb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	       enum v4l2_field field)
 {
 	struct cx8802_fh *fh = q->priv_data;
-	return cx8802_buf_prepare(fh->dev, (struct cx88_buffer*)vb, field);
+	return cx8802_buf_prepare(q, fh->dev, (struct cx88_buffer*)vb, field);
 }
 
 static void
@@ -1354,8 +1354,7 @@ bb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
 static void
 bb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 {
-	struct cx8802_fh *fh = q->priv_data;
-	cx88_free_buffer(fh->dev->pci, (struct cx88_buffer*)vb);
+	cx88_free_buffer(q, (struct cx88_buffer*)vb);
 }
 
 static struct videobuf_queue_ops blackbird_qops = {
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index c2cdbafdb77b..2c3d9f1999be 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -213,13 +213,13 @@ int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
 }
 
 void
-cx88_free_buffer(struct pci_dev *pci, struct cx88_buffer *buf)
+cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf)
 {
 	BUG_ON(in_interrupt());
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_pci_unmap(pci, &buf->vb.dma);
+	videobuf_dma_unmap(q, &buf->vb.dma);
 	videobuf_dma_free(&buf->vb.dma);
-	btcx_riscmem_free(pci, &buf->risc);
+	btcx_riscmem_free((struct pci_dev *)q->dev, &buf->risc);
 	buf->vb.state = STATE_NEEDS_INIT;
 }
 
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index a9fc2695b157..f0ea9b5cdbc2 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -90,7 +90,7 @@ static int dvb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 			   enum v4l2_field field)
 {
 	struct cx8802_dev *dev = q->priv_data;
-	return cx8802_buf_prepare(dev, (struct cx88_buffer*)vb,field);
+	return cx8802_buf_prepare(q, dev, (struct cx88_buffer*)vb,field);
 }
 
 static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
@@ -101,8 +101,7 @@ static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
 
 static void dvb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 {
-	struct cx8802_dev *dev = q->priv_data;
-	cx88_free_buffer(dev->pci, (struct cx88_buffer*)vb);
+	cx88_free_buffer(q, (struct cx88_buffer*)vb);
 }
 
 static struct videobuf_queue_ops dvb_qops = {
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index c79cc1d2bf8b..7d16888b4a86 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -163,8 +163,8 @@ static int cx8802_restart_queue(struct cx8802_dev    *dev,
 
 /* ------------------------------------------------------------------ */
 
-int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf,
-			enum v4l2_field field)
+int cx8802_buf_prepare(struct videobuf_queue *q, struct cx8802_dev *dev,
+			struct cx88_buffer *buf, enum v4l2_field field)
 {
 	int size = dev->ts_packet_size * dev->ts_packet_count;
 	int rc;
@@ -179,7 +179,7 @@ int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf,
 		buf->vb.size   = size;
 		buf->vb.field  = field /*V4L2_FIELD_TOP*/;
 
-		if (0 != (rc = videobuf_iolock(dev->pci,&buf->vb,NULL)))
+		if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL)))
 			goto fail;
 		cx88_risc_databuffer(dev->pci, &buf->risc,
 				     buf->vb.dma.sglist,
@@ -189,36 +189,36 @@ int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf,
 	return 0;
 
  fail:
-	cx88_free_buffer(dev->pci,buf);
+	cx88_free_buffer(q,buf);
 	return rc;
 }
 
 void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf)
 {
 	struct cx88_buffer    *prev;
-	struct cx88_dmaqueue  *q    = &dev->mpegq;
+	struct cx88_dmaqueue  *cx88q = &dev->mpegq;
 
 	dprintk( 1, "cx8802_buf_queue\n" );
 	/* add jump to stopper */
 	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
-	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
+	buf->risc.jmp[1] = cpu_to_le32(cx88q->stopper.dma);
 
-	if (list_empty(&q->active)) {
+	if (list_empty(&cx88q->active)) {
 		dprintk( 0, "queue is empty - first active\n" );
-		list_add_tail(&buf->vb.queue,&q->active);
-		cx8802_start_dma(dev, q, buf);
+		list_add_tail(&buf->vb.queue,&cx88q->active);
+		cx8802_start_dma(dev, cx88q, buf);
 		buf->vb.state = STATE_ACTIVE;
-		buf->count    = q->count++;
-		mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+		buf->count    = cx88q->count++;
+		mod_timer(&cx88q->timeout, jiffies+BUFFER_TIMEOUT);
 		dprintk(0,"[%p/%d] %s - first active\n",
 			buf, buf->vb.i, __FUNCTION__);
 
 	} else {
 		dprintk( 1, "queue is not empty - append to active\n" );
-		prev = list_entry(q->active.prev, struct cx88_buffer, vb.queue);
-		list_add_tail(&buf->vb.queue,&q->active);
+		prev = list_entry(cx88q->active.prev, struct cx88_buffer, vb.queue);
+		list_add_tail(&buf->vb.queue,&cx88q->active);
 		buf->vb.state = STATE_ACTIVE;
-		buf->count    = q->count++;
+		buf->count    = cx88q->count++;
 		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
 		dprintk( 1, "[%p/%d] %s - append to active\n",
 			buf, buf->vb.i, __FUNCTION__);
diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c
index da8d97ce0c4b..641a0c5a6490 100644
--- a/drivers/media/video/cx88/cx88-tvaudio.c
+++ b/drivers/media/video/cx88/cx88-tvaudio.c
@@ -885,6 +885,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
 			set_audio_standard_BTSC(core, 1, EN_BTSC_FORCE_SAP);
 			break;
 		case V4L2_TUNER_MODE_STEREO:
+		case V4L2_TUNER_MODE_LANG1_LANG2:
 			set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_STEREO);
 			break;
 		}
@@ -905,6 +906,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
 							 EN_NICAM_FORCE_MONO2);
 				break;
 			case V4L2_TUNER_MODE_STEREO:
+			case V4L2_TUNER_MODE_LANG1_LANG2:
 				set_audio_standard_NICAM(core,
 							 EN_NICAM_FORCE_STEREO);
 				break;
@@ -926,6 +928,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
 							      EN_A2_FORCE_MONO2);
 					break;
 				case V4L2_TUNER_MODE_STEREO:
+				case V4L2_TUNER_MODE_LANG1_LANG2:
 					set_audio_standard_A2(core,
 							      EN_A2_FORCE_STEREO);
 					break;
diff --git a/drivers/media/video/cx88/cx88-vbi.c b/drivers/media/video/cx88/cx88-vbi.c
index 9bc6c8995581..846faadc9f1c 100644
--- a/drivers/media/video/cx88/cx88-vbi.c
+++ b/drivers/media/video/cx88/cx88-vbi.c
@@ -175,7 +175,7 @@ vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 		buf->vb.size   = size;
 		buf->vb.field  = V4L2_FIELD_SEQ_TB;
 
-		if (0 != (rc = videobuf_iolock(dev->pci,&buf->vb,NULL)))
+		if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL)))
 			goto fail;
 		cx88_risc_buffer(dev->pci, &buf->risc,
 				 buf->vb.dma.sglist,
@@ -187,7 +187,7 @@ vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	return 0;
 
  fail:
-	cx88_free_buffer(dev->pci,buf);
+	cx88_free_buffer(q,buf);
 	return rc;
 }
 
@@ -227,9 +227,8 @@ vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
 static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 {
 	struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb);
-	struct cx8800_fh   *fh  = q->priv_data;
 
-	cx88_free_buffer(fh->dev->pci,buf);
+	cx88_free_buffer(q,buf);
 }
 
 struct videobuf_queue_ops cx8800_vbi_qops = {
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 6c97aa740d27..72a417b31745 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -564,7 +564,7 @@ buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
 		init_buffer = 1;
-		if (0 != (rc = videobuf_iolock(dev->pci,&buf->vb,NULL)))
+		if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL)))
 			goto fail;
 	}
 
@@ -614,7 +614,7 @@ buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	return 0;
 
  fail:
-	cx88_free_buffer(dev->pci,buf);
+	cx88_free_buffer(q,buf);
 	return rc;
 }
 
@@ -671,9 +671,8 @@ buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
 static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 {
 	struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb);
-	struct cx8800_fh   *fh  = q->priv_data;
 
-	cx88_free_buffer(fh->dev->pci,buf);
+	cx88_free_buffer(q,buf);
 }
 
 static struct videobuf_queue_ops cx8800_video_qops = {
@@ -1251,9 +1250,17 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio,
 {
 	int err;
 
-	dprintk(2, "CORE IOCTL: 0x%x\n", cmd );
-	if (video_debug > 1)
-		v4l_print_ioctl(core->name,cmd);
+       if (video_debug) {
+	       if (video_debug > 1) {
+		       if (_IOC_DIR(cmd) & _IOC_WRITE)
+			       v4l_printk_ioctl_arg("cx88(w)",cmd, arg);
+		       else if (!_IOC_DIR(cmd) & _IOC_READ) {
+			       v4l_print_ioctl("cx88", cmd);
+		       }
+	       } else
+		       v4l_print_ioctl(core->name,cmd);
+
+       }
 
 	switch (cmd) {
 	/* ---------- tv norms ---------- */
@@ -1460,7 +1467,19 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio,
 static int video_ioctl(struct inode *inode, struct file *file,
 		       unsigned int cmd, unsigned long arg)
 {
-	return video_usercopy(inode, file, cmd, arg, video_do_ioctl);
+       int retval;
+
+       retval=video_usercopy(inode, file, cmd, arg, video_do_ioctl);
+
+       if (video_debug > 1) {
+	       if (retval < 0) {
+		       v4l_print_ioctl("cx88(err)", cmd);
+		       printk(KERN_DEBUG "cx88(err): errcode=%d\n",retval);
+	       } else if (_IOC_DIR(cmd) & _IOC_READ)
+		       v4l_printk_ioctl_arg("cx88(r)",cmd, (void *)arg);
+       }
+
+       return retval;
 }
 
 /* ----------------------------------------------------------- */
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index cfa8668784b4..326a25f147f6 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -27,7 +27,6 @@
 
 #include <media/tuner.h>
 #include <media/tveeprom.h>
-#include <media/audiochip.h>
 #include <media/video-buf.h>
 #include <media/video-buf-dvb.h>
 
@@ -485,7 +484,7 @@ extern int
 cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
 		  u32 reg, u32 mask, u32 value);
 extern void
-cx88_free_buffer(struct pci_dev *pci, struct cx88_buffer *buf);
+cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf);
 
 extern void cx88_risc_disasm(struct cx88_core *core,
 			     struct btcx_riscmem *risc);
@@ -577,8 +576,8 @@ void cx88_ir_irq(struct cx88_core *core);
 /* ----------------------------------------------------------- */
 /* cx88-mpeg.c                                                 */
 
-int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf,
-			enum v4l2_field field);
+int cx8802_buf_prepare(struct videobuf_queue *q,struct cx8802_dev *dev,
+			struct cx88_buffer *buf, enum v4l2_field field);
 void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf);
 void cx8802_cancel_buffers(struct cx8802_dev *dev);
 
diff --git a/drivers/media/video/dabfirmware.h b/drivers/media/video/dabfirmware.h
new file mode 100644
index 000000000000..d14d803566a3
--- /dev/null
+++ b/drivers/media/video/dabfirmware.h
@@ -0,0 +1,1408 @@
+/*
+ * dabdata.h - dab usb firmware and bitstream data
+ */
+
+static INTEL_HEX_RECORD firmware[] = {
+
+{  2, 0x0000, 0, {0x21,0x57} },
+{  3, 0x0003, 0, {0x02,0x01,0x66} },
+{  3, 0x000b, 0, {0x02,0x01,0x66} },
+{  3, 0x0013, 0, {0x02,0x01,0x66} },
+{  3, 0x001b, 0, {0x02,0x01,0x66} },
+{  3, 0x0023, 0, {0x02,0x01,0x66} },
+{  3, 0x002b, 0, {0x02,0x01,0x66} },
+{  3, 0x0033, 0, {0x02,0x03,0x0f} },
+{  3, 0x003b, 0, {0x02,0x01,0x66} },
+{  3, 0x0043, 0, {0x02,0x01,0x00} },
+{  3, 0x004b, 0, {0x02,0x01,0x66} },
+{  3, 0x0053, 0, {0x02,0x01,0x66} },
+{  3, 0x005b, 0, {0x02,0x04,0xbd} },
+{  3, 0x0063, 0, {0x02,0x01,0x67} },
+{  3, 0x0100, 0, {0x02,0x0c,0x5a} },
+{  3, 0x0104, 0, {0x02,0x01,0xed} },
+{  3, 0x0108, 0, {0x02,0x02,0x51} },
+{  3, 0x010c, 0, {0x02,0x02,0x7c} },
+{  3, 0x0110, 0, {0x02,0x02,0xe4} },
+{  1, 0x0114, 0, {0x32} },
+{  1, 0x0118, 0, {0x32} },
+{  3, 0x011c, 0, {0x02,0x05,0xfd} },
+{  3, 0x0120, 0, {0x02,0x00,0x00} },
+{  3, 0x0124, 0, {0x02,0x00,0x00} },
+{  3, 0x0128, 0, {0x02,0x04,0x3c} },
+{  3, 0x012c, 0, {0x02,0x04,0x6a} },
+{  3, 0x0130, 0, {0x02,0x00,0x00} },
+{  3, 0x0134, 0, {0x02,0x00,0x00} },
+{  3, 0x0138, 0, {0x02,0x00,0x00} },
+{  3, 0x013c, 0, {0x02,0x00,0x00} },
+{  3, 0x0140, 0, {0x02,0x00,0x00} },
+{  3, 0x0144, 0, {0x02,0x00,0x00} },
+{  3, 0x0148, 0, {0x02,0x00,0x00} },
+{  3, 0x014c, 0, {0x02,0x00,0x00} },
+{  3, 0x0150, 0, {0x02,0x00,0x00} },
+{  3, 0x0154, 0, {0x02,0x00,0x00} },
+{ 10, 0x0157, 0, {0x75,0x81,0x7f,0xe5,0x82,0x60,0x03,0x02,0x01,0x61} },
+{  5, 0x0161, 0, {0x12,0x07,0x6f,0x21,0x64} },
+{  1, 0x0166, 0, {0x32} },
+{ 14, 0x0167, 0, {0xc0,0xd0,0xc0,0x86,0xc0,0x82,0xc0,0x83,0xc0,0xe0,0x90,0x7f,0x97,0xe0} },
+{ 14, 0x0175, 0, {0x44,0x80,0xf0,0x90,0x7f,0x69,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} },
+{ 14, 0x0183, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} },
+{ 14, 0x0191, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0x90,0x7f,0x97,0xe0} },
+{  3, 0x019f, 0, {0x55,0x7f,0xf0} },
+{ 14, 0x01a2, 0, {0x90,0x7f,0x9a,0xe0,0x30,0xe4,0x23,0x90,0x7f,0x68,0xf0,0xf0,0xf0,0xf0} },
+{ 14, 0x01b0, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} },
+{ 14, 0x01be, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} },
+{ 14, 0x01cc, 0, {0xe5,0xd8,0xc2,0xe3,0xf5,0xd8,0xd0,0xe0,0xd0,0x83,0xd0,0x82,0xd0,0x86} },
+{  3, 0x01da, 0, {0xd0,0xd0,0x32} },
+{  8, 0x01dd, 0, {0x75,0x86,0x00,0x90,0xff,0xc3,0x7c,0x05} },
+{  7, 0x01e5, 0, {0xa3,0xe5,0x82,0x45,0x83,0x70,0xf9} },
+{  1, 0x01ec, 0, {0x22} },
+{ 14, 0x01ed, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0xd0} },
+{ 14, 0x01fb, 0, {0x75,0xd0,0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91} },
+{ 13, 0x0209, 0, {0x90,0x88,0x00,0xe0,0xf5,0x41,0x90,0x7f,0xab,0x74,0x02,0xf0,0x90} },
+{  9, 0x0216, 0, {0x7f,0xab,0x74,0x02,0xf0,0xe5,0x32,0x60,0x21} },
+{  4, 0x021f, 0, {0x7a,0x00,0x7b,0x00} },
+{ 11, 0x0223, 0, {0xc3,0xea,0x94,0x18,0xeb,0x64,0x80,0x94,0x80,0x50,0x12} },
+{ 14, 0x022e, 0, {0x90,0x7f,0x69,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0x0a,0xba,0x00} },
+{  2, 0x023c, 0, {0x01,0x0b} },
+{  2, 0x023e, 0, {0x80,0xe3} },
+{  2, 0x0240, 0, {0xd0,0x86} },
+{ 14, 0x0242, 0, {0xd0,0xd0,0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0} },
+{  1, 0x0250, 0, {0x32} },
+{ 14, 0x0251, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} },
+{ 14, 0x025f, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xab,0x74} },
+{  4, 0x026d, 0, {0x04,0xf0,0xd0,0x86} },
+{ 11, 0x0271, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 14, 0x027c, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} },
+{ 14, 0x028a, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} },
+{ 13, 0x0298, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} },
+{ 12, 0x02a5, 0, {0x7f,0xab,0x74,0x08,0xf0,0x75,0x6e,0x00,0x75,0x6f,0x02,0x12} },
+{  6, 0x02b1, 0, {0x11,0x44,0x75,0x70,0x39,0x75} },
+{  6, 0x02b7, 0, {0x71,0x0c,0x75,0x72,0x02,0x12} },
+{ 12, 0x02bd, 0, {0x11,0x75,0x90,0x7f,0xd6,0xe4,0xf0,0x75,0xd8,0x20,0xd0,0x86} },
+{ 14, 0x02c9, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} },
+{ 13, 0x02d7, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 14, 0x02e4, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} },
+{ 14, 0x02f2, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xab,0x74} },
+{  4, 0x0300, 0, {0x10,0xf0,0xd0,0x86} },
+{ 11, 0x0304, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 14, 0x030f, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} },
+{ 14, 0x031d, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} },
+{ 12, 0x032b, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0x75,0x6e,0x00,0x75,0x6f,0x02} },
+{  7, 0x0337, 0, {0x12,0x11,0x44,0x75,0x70,0x40,0x75} },
+{  6, 0x033e, 0, {0x71,0x0c,0x75,0x72,0x02,0x12} },
+{ 14, 0x0344, 0, {0x11,0x75,0x90,0x7f,0xd6,0x74,0x02,0xf0,0x90,0x7f,0xd6,0x74,0x06,0xf0} },
+{  5, 0x0352, 0, {0x75,0xd8,0x10,0xd0,0x86} },
+{ 14, 0x0357, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} },
+{ 13, 0x0365, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 13, 0x0372, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x90,0x7f,0xa6,0x74,0x9a,0xf0,0x12} },
+{ 12, 0x037f, 0, {0x10,0x1b,0x90,0x7f,0xa6,0xe5,0x42,0xf0,0x12,0x10,0x1b,0x90} },
+{ 13, 0x038b, 0, {0x7f,0xa6,0xe5,0x43,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa5,0x74,0x40} },
+{  1, 0x0398, 0, {0xf0} },
+{  1, 0x0399, 0, {0x22} },
+{ 13, 0x039a, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x90,0x7f,0xa6,0x74,0x9a,0xf0,0x12} },
+{ 12, 0x03a7, 0, {0x10,0x1b,0x90,0x7f,0xa6,0xe5,0x44,0xf0,0x12,0x10,0x1b,0x90} },
+{ 12, 0x03b3, 0, {0x7f,0xa6,0xe5,0x45,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa6,0xe5} },
+{ 11, 0x03bf, 0, {0x46,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa5,0x74,0x40,0xf0} },
+{  1, 0x03ca, 0, {0x22} },
+{ 10, 0x03cb, 0, {0x75,0x44,0x02,0x75,0x45,0x00,0x75,0x46,0x00,0x12} },
+{  9, 0x03d5, 0, {0x03,0x9a,0x75,0x42,0x03,0x75,0x43,0x00,0x12} },
+{  2, 0x03de, 0, {0x03,0x72} },
+{  1, 0x03e0, 0, {0x22} },
+{ 12, 0x03e1, 0, {0x90,0x88,0x00,0xe5,0x36,0xf0,0x90,0x88,0x00,0x74,0x10,0x25} },
+{  9, 0x03ed, 0, {0x36,0xf0,0x12,0x01,0xdd,0x75,0x42,0x01,0x75} },
+{  9, 0x03f6, 0, {0x43,0x18,0x12,0x03,0x72,0x75,0x44,0x02,0x75} },
+{  9, 0x03ff, 0,{0x45,0x00,0x75,0x46,0x00,0x12,0x03,0x9a,0x75} },
+{  8, 0x0408, 0,{0x42,0x03,0x75,0x43,0x44,0x12,0x03,0x72} },
+{  1, 0x0410, 0,{0x22} },
+{ 14, 0x0411, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} },
+{ 14, 0x041f, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xaa,0x74} },
+{  4, 0x042d, 0, {0x02,0xf0,0xd0,0x86} },
+{ 11, 0x0431, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 14, 0x043c, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} },
+{ 14, 0x044a, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xa9,0x74} },
+{  7, 0x0458, 0, {0x04,0xf0,0x75,0x30,0x01,0xd0,0x86} },
+{ 11, 0x045f, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 14, 0x046a, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} },
+{ 14, 0x0478, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xaa,0x74} },
+{  7, 0x0486, 0, {0x04,0xf0,0x75,0x31,0x01,0xd0,0x86} },
+{ 11, 0x048d, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 14, 0x0498, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} },
+{ 12, 0x04a6, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe5,0xf5,0x91,0xd0,0x86} },
+{ 11, 0x04b2, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 14, 0x04bd, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} },
+{ 12, 0x04cb, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe7,0xf5,0x91,0xd0,0x86} },
+{ 11, 0x04d7, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 12, 0x04e2, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x8a,0x20,0x90,0x7f,0x96,0xe4,0xf0} },
+{  1, 0x04ee, 0, {0x22} },
+{  7, 0x04ef, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x8a,0x21} },
+{  1, 0x04f6, 0, {0x22} },
+{ 14, 0x04f7, 0, {0x90,0x17,0x13,0xe0,0xfa,0x90,0x17,0x15,0xe0,0xfb,0x74,0x80,0x2a,0xfa} },
+{ 14, 0x0505, 0, {0x74,0x80,0x2b,0xfb,0xea,0x03,0x03,0x54,0x3f,0xfc,0xea,0xc4,0x23,0x54} },
+{ 14, 0x0513, 0, {0x1f,0xfa,0x2c,0xfa,0xeb,0x03,0x03,0x54,0x3f,0xfc,0xeb,0xc4,0x23,0x54} },
+{ 11, 0x0521, 0, {0x1f,0xfb,0x2c,0xfb,0x90,0x17,0x0a,0xe0,0xfc,0x60,0x02} },
+{  2, 0x052c, 0, {0x7a,0x00} },
+{  7, 0x052e, 0, {0x90,0x17,0x0c,0xe0,0xfc,0x60,0x02} },
+{  2, 0x0535, 0, {0x7b,0x00} },
+{ 11, 0x0537, 0, {0xea,0x2b,0xfc,0xc3,0x13,0xf5,0x3a,0x75,0x44,0x02,0x8b} },
+{  7, 0x0542, 0, {0x45,0x8a,0x46,0x12,0x03,0x9a,0x75} },
+{  9, 0x0549, 0, {0x6e,0x08,0x75,0x6f,0x00,0x12,0x11,0x44,0x75} },
+{  4, 0x0552, 0, {0x70,0x47,0x75,0x71} },
+{  8, 0x0556, 0, {0x0c,0x75,0x72,0x02,0x12,0x11,0x75,0x85} },
+{  5, 0x055e, 0, {0x3a,0x73,0x12,0x11,0xa0} },
+{  1, 0x0563, 0, {0x22} },
+{ 14, 0x0564, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x65,0x02,0xf0,0x90} },
+{ 14, 0x0572, 0, {0x7f,0xeb,0xe0,0xfa,0x90,0x7f,0xea,0xe0,0xfb,0x90,0x7f,0xef,0xe0,0xfc} },
+{ 14, 0x0580, 0, {0x33,0x95,0xe0,0xfd,0x8c,0x05,0x7c,0x00,0x90,0x7f,0xee,0xe0,0xfe,0x33} },
+{ 14, 0x058e, 0, {0x95,0xe0,0xff,0xec,0x2e,0xfc,0xed,0x3f,0xfd,0x90,0x7f,0xe9,0xe0,0xfe} },
+{  5, 0x059c, 0, {0xbe,0x01,0x02,0x80,0x03} },
+{  3, 0x05a1, 0, {0x02,0x05,0xf9} },
+{  6, 0x05a4, 0, {0xbc,0x01,0x21,0xbd,0x00,0x1e} },
+{ 14, 0x05aa, 0, {0xea,0xc4,0x03,0x54,0xf8,0xfc,0xeb,0x25,0xe0,0xfd,0x2c,0x24,0x00,0xfc} },
+{ 14, 0x05b8, 0, {0xe4,0x34,0x17,0xfd,0x90,0x7e,0xc0,0xe0,0xfe,0x8c,0x82,0x8d,0x83,0xf0} },
+{  2, 0x05c6, 0, {0x80,0x31} },
+{ 14, 0x05c8, 0, {0xea,0xc4,0x03,0x54,0xf8,0xfa,0xeb,0x25,0xe0,0xfb,0x2a,0xfa,0x24,0x00} },
+{ 14, 0x05d6, 0, {0xfb,0xe4,0x34,0x17,0xfc,0x90,0x7e,0xc0,0xe0,0xfd,0x8b,0x82,0x8c,0x83} },
+{ 14, 0x05e4, 0, {0xf0,0x74,0x01,0x2a,0x24,0x00,0xfa,0xe4,0x34,0x17,0xfb,0x90,0x7e,0xc1} },
+{  7, 0x05f2, 0, {0xe0,0xfc,0x8a,0x82,0x8b,0x83,0xf0} },
+{  3, 0x05f9, 0, {0x75,0x38,0x01} },
+{  1, 0x05fc, 0, {0x22} },
+{ 14, 0x05fd, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} },
+{ 14, 0x060b, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} },
+{ 13, 0x0619, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} },
+{ 13, 0x0626, 0, {0x7f,0xaa,0x74,0x01,0xf0,0x12,0x05,0x64,0x75,0x37,0x00,0xd0,0x86} },
+{ 14, 0x0633, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} },
+{ 13, 0x0641, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 14, 0x064e, 0, {0x90,0x7f,0xeb,0xe0,0xfa,0x90,0x7f,0xea,0xe0,0xfb,0x90,0x7f,0xee,0xe0} },
+{ 14, 0x065c, 0, {0xfc,0x33,0x95,0xe0,0xfd,0x90,0x7f,0x96,0xe0,0xfe,0x90,0x7f,0x96,0x74} },
+{ 14, 0x066a, 0, {0x80,0x65,0x06,0xf0,0x90,0x7f,0x00,0x74,0x01,0xf0,0xea,0xc4,0x03,0x54} },
+{ 14, 0x0678, 0, {0xf8,0xfe,0xeb,0x25,0xe0,0xfb,0x2e,0xfe,0x24,0x00,0xfb,0xe4,0x34,0x17} },
+{ 14, 0x0686, 0, {0xff,0x8b,0x82,0x8f,0x83,0xe0,0xfb,0x74,0x01,0x2e,0x24,0x00,0xfe,0xe4} },
+{ 14, 0x0694, 0, {0x34,0x17,0xff,0x8e,0x82,0x8f,0x83,0xe0,0xfe,0x90,0x7f,0xe9,0xe0,0xff} },
+{  3, 0x06a2, 0, {0xbf,0x81,0x0a} },
+{ 10, 0x06a5, 0, {0x90,0x7f,0x00,0xeb,0xf0,0x90,0x7f,0x01,0xee,0xf0} },
+{  8, 0x06af, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x82,0x1a} },
+{  3, 0x06b7, 0, {0xba,0x01,0x0c} },
+{ 12, 0x06ba, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0b} },
+{ 11, 0x06c6, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0x74,0xb5,0xf0} },
+{  8, 0x06d1, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x83,0x1b} },
+{  3, 0x06d9, 0, {0xba,0x01,0x0d} },
+{ 13, 0x06dc, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0b} },
+{ 11, 0x06e9, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0x74,0x12,0xf0} },
+{  8, 0x06f4, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x84,0x1c} },
+{  3, 0x06fc, 0, {0xba,0x01,0x0d} },
+{ 13, 0x06ff, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0c} },
+{ 12, 0x070c, 0, {0x90,0x7f,0x00,0x74,0x80,0xf0,0x90,0x7f,0x01,0x74,0x01,0xf0} },
+{  5, 0x0718, 0, {0x90,0x7f,0xb5,0xec,0xf0} },
+{  1, 0x071d, 0, {0x22} },
+{ 12, 0x071e, 0, {0x75,0x36,0x0d,0x90,0x88,0x00,0x74,0x1d,0xf0,0x75,0x6b,0x80} },
+{ 10, 0x072a, 0, {0x75,0x6c,0x3c,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} },
+{  9, 0x0734, 0, {0x6c,0x0f,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} },
+{  9, 0x073d, 0, {0x6c,0x06,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} },
+{  7, 0x0746, 0, {0x6c,0x01,0x12,0x10,0xe2,0x7a,0x00} },
+{  3, 0x074d, 0, {0xba,0xff,0x00} },
+{  2, 0x0750, 0, {0x50,0x0a} },
+{ 10, 0x0752, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xf1} },
+{ 10, 0x075c, 0, {0x75,0x6b,0x80,0x75,0x6c,0x3c,0x12,0x10,0xe2,0x75} },
+{  8, 0x0766, 0, {0x6b,0x80,0x75,0x6c,0x0f,0x12,0x10,0xe2} },
+{  1, 0x076e, 0, {0x22} },
+{ 14, 0x076f, 0, {0x90,0x7f,0xa1,0xe4,0xf0,0x90,0x7f,0xaf,0x74,0x01,0xf0,0x90,0x7f,0x92} },
+{ 14, 0x077d, 0, {0x74,0x02,0xf0,0x75,0x8e,0x31,0x75,0x89,0x21,0x75,0x88,0x00,0x75,0xc8} },
+{ 14, 0x078b, 0, {0x00,0x75,0x8d,0x40,0x75,0x98,0x40,0x75,0xc0,0x40,0x75,0x87,0x00,0x75} },
+{  9, 0x0799, 0, {0x20,0x00,0x75,0x21,0x00,0x75,0x22,0x00,0x75} },
+{  5, 0x07a2, 0, {0x23,0x00,0x75,0x47,0x00} },
+{  7, 0x07a7, 0, {0xc3,0xe5,0x47,0x94,0x20,0x50,0x11} },
+{ 13, 0x07ae, 0, {0xe5,0x47,0x24,0x00,0xf5,0x82,0xe4,0x34,0x17,0xf5,0x83,0xe4,0xf0} },
+{  4, 0x07bb, 0, {0x05,0x47,0x80,0xe8} },
+{  9, 0x07bf, 0, {0xe4,0xf5,0x40,0xf5,0x3f,0xe4,0xf5,0x3c,0xf5} },
+{  7, 0x07c8, 0, {0x3b,0xe4,0xf5,0x3e,0xf5,0x3d,0x75} },
+{ 11, 0x07cf, 0, {0x32,0x00,0x75,0x37,0x00,0x75,0x39,0x00,0x90,0x7f,0x93} },
+{ 14, 0x07da, 0, {0x74,0x3c,0xf0,0x90,0x7f,0x9c,0x74,0xff,0xf0,0x90,0x7f,0x96,0x74,0x80} },
+{ 14, 0x07e8, 0, {0xf0,0x90,0x7f,0x94,0x74,0x70,0xf0,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90} },
+{ 14, 0x07f6, 0, {0x7f,0x97,0xe4,0xf0,0x90,0x7f,0x95,0x74,0xc2,0xf0,0x90,0x7f,0x98,0x74} },
+{ 14, 0x0804, 0, {0x28,0xf0,0x90,0x7f,0x9e,0x74,0x28,0xf0,0x90,0x7f,0xf0,0xe4,0xf0,0x90} },
+{ 14, 0x0812, 0, {0x7f,0xf1,0xe4,0xf0,0x90,0x7f,0xf2,0xe4,0xf0,0x90,0x7f,0xf3,0xe4,0xf0} },
+{ 14, 0x0820, 0, {0x90,0x7f,0xf4,0xe4,0xf0,0x90,0x7f,0xf5,0xe4,0xf0,0x90,0x7f,0xf6,0xe4} },
+{ 14, 0x082e, 0, {0xf0,0x90,0x7f,0xf7,0xe4,0xf0,0x90,0x7f,0xf8,0xe4,0xf0,0x90,0x7f,0xf9} },
+{ 14, 0x083c, 0, {0x74,0x38,0xf0,0x90,0x7f,0xfa,0x74,0xa0,0xf0,0x90,0x7f,0xfb,0x74,0xa0} },
+{ 14, 0x084a, 0, {0xf0,0x90,0x7f,0xfc,0x74,0xa0,0xf0,0x90,0x7f,0xfd,0x74,0xa0,0xf0,0x90} },
+{ 14, 0x0858, 0, {0x7f,0xfe,0x74,0xa0,0xf0,0x90,0x7f,0xff,0x74,0xa0,0xf0,0x90,0x7f,0xe0} },
+{ 14, 0x0866, 0, {0x74,0x03,0xf0,0x90,0x7f,0xe1,0x74,0x01,0xf0,0x90,0x7f,0xdd,0x74,0x80} },
+{ 11, 0x0874, 0, {0xf0,0x12,0x12,0x43,0x12,0x07,0x1e,0x7a,0x00,0x7b,0x00} },
+{  9, 0x087f, 0, {0xc3,0xea,0x94,0x1e,0xeb,0x94,0x00,0x50,0x17} },
+{ 12, 0x0888, 0, {0x90,0x88,0x00,0xe0,0xf5,0x47,0x90,0x88,0x0b,0xe0,0xf5,0x47} },
+{  9, 0x0894, 0, {0x90,0x7f,0x68,0xf0,0x0a,0xba,0x00,0x01,0x0b} },
+{  2, 0x089d, 0, {0x80,0xe0} },
+{ 12, 0x089f, 0, {0x12,0x03,0xe1,0x90,0x7f,0xd6,0xe4,0xf0,0x7a,0x00,0x7b,0x00} },
+{ 13, 0x08ab, 0, {0x8a,0x04,0x8b,0x05,0xc3,0xea,0x94,0xe0,0xeb,0x94,0x2e,0x50,0x1a} },
+{ 14, 0x08b8, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} },
+{ 10, 0x08c6, 0, {0x04,0xd0,0x03,0xd0,0x02,0x0a,0xba,0x00,0x01,0x0b} },
+{  2, 0x08d0, 0, {0x80,0xd9} },
+{ 13, 0x08d2, 0, {0x90,0x7f,0xd6,0x74,0x02,0xf0,0x90,0x7f,0xd6,0x74,0x06,0xf0,0x90} },
+{ 14, 0x08df, 0, {0x7f,0xde,0x74,0x05,0xf0,0x90,0x7f,0xdf,0x74,0x05,0xf0,0x90,0x7f,0xac} },
+{ 14, 0x08ed, 0, {0xe4,0xf0,0x90,0x7f,0xad,0x74,0x05,0xf0,0x75,0xa8,0x80,0x75,0xf8,0x10} },
+{ 13, 0x08fb, 0, {0x90,0x7f,0xae,0x74,0x0b,0xf0,0x90,0x7f,0xe2,0x74,0x88,0xf0,0x90} },
+{ 12, 0x0908, 0, {0x7f,0xab,0x74,0x08,0xf0,0x75,0xe8,0x11,0x75,0x32,0x01,0x75} },
+{ 12, 0x0914, 0, {0x31,0x00,0x75,0x30,0x00,0xc0,0x04,0xc0,0x05,0x12,0x04,0xf7} },
+{ 10, 0x0920, 0, {0xd0,0x05,0xd0,0x04,0x75,0x34,0x00,0x75,0x35,0x01} },
+{ 13, 0x092a, 0, {0x90,0x7f,0xae,0x74,0x03,0xf0,0x8c,0x02,0xba,0x00,0x02,0x80,0x03} },
+{  3, 0x0937, 0, {0x02,0x0a,0x3f} },
+{ 12, 0x093a, 0, {0x85,0x33,0x34,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90,0x7f,0x97} },
+{ 14, 0x0946, 0, {0x74,0x08,0xf0,0x90,0x7f,0x9d,0x74,0x88,0xf0,0x90,0x7f,0x9a,0xe0,0xfa} },
+{ 12, 0x0954, 0, {0x74,0x05,0x5a,0xf5,0x33,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90} },
+{ 13, 0x0960, 0, {0x7f,0x97,0x74,0x02,0xf0,0x90,0x7f,0x9d,0x74,0x82,0xf0,0xe5,0x33} },
+{ 13, 0x096d, 0, {0x25,0xe0,0xfa,0x90,0x7f,0x9a,0xe0,0x54,0x05,0xfb,0x4a,0xf5,0x33} },
+{  2, 0x097a, 0, {0x60,0x0c} },
+{ 12, 0x097c, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x4a,0xf0} },
+{ 11, 0x0988, 0, {0x75,0x6e,0x00,0x75,0x6f,0x00,0xc0,0x04,0xc0,0x05,0x12} },
+{ 14, 0x0993, 0, {0x11,0x44,0xd0,0x05,0xd0,0x04,0x90,0x17,0x13,0xe0,0xfa,0x74,0x80,0x2a} },
+{  6, 0x09a1, 0, {0xfa,0xe5,0x33,0xb4,0x04,0x29} },
+{  3, 0x09a7, 0, {0xba,0xa0,0x00} },
+{  2, 0x09aa, 0, {0x50,0x24} },
+{ 13, 0x09ac, 0, {0x90,0x17,0x13,0xe0,0x04,0xfb,0x0b,0x90,0x17,0x13,0xeb,0xf0,0x90} },
+{ 14, 0x09b9, 0, {0x17,0x13,0xe0,0xfb,0x90,0x17,0x15,0xf0,0xc0,0x02,0xc0,0x04,0xc0,0x05} },
+{  9, 0x09c7, 0, {0x12,0x04,0xf7,0xd0,0x05,0xd0,0x04,0xd0,0x02} },
+{  5, 0x09d0, 0, {0xe5,0x33,0xb4,0x02,0x26} },
+{  6, 0x09d5, 0, {0xc3,0x74,0x04,0x9a,0x50,0x20} },
+{ 13, 0x09db, 0, {0x90,0x17,0x13,0xe0,0xfa,0x1a,0x1a,0x90,0x17,0x13,0xea,0xf0,0x90} },
+{ 13, 0x09e8, 0, {0x17,0x13,0xe0,0xfa,0x90,0x17,0x15,0xf0,0xc0,0x04,0xc0,0x05,0x12} },
+{  6, 0x09f5, 0, {0x04,0xf7,0xd0,0x05,0xd0,0x04} },
+{  5, 0x09fb, 0, {0xe5,0x33,0xb4,0x08,0x1d} },
+{  4, 0x0a00, 0, {0xe5,0x34,0x70,0x19} },
+{ 10, 0x0a04, 0, {0x74,0x01,0x25,0x35,0x54,0x0f,0xf5,0x35,0x85,0x35} },
+{ 12, 0x0a0e, 0, {0x75,0x75,0x76,0x00,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0} },
+{  3, 0x0a1a, 0, {0x05,0xd0,0x04} },
+{  5, 0x0a1d, 0, {0xe5,0x33,0xb4,0x01,0x1d} },
+{  4, 0x0a22, 0, {0xe5,0x34,0x70,0x19} },
+{ 10, 0x0a26, 0, {0xe5,0x35,0x24,0xff,0x54,0x0f,0xf5,0x35,0x85,0x35} },
+{ 12, 0x0a30, 0, {0x75,0x75,0x76,0x00,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0} },
+{  3, 0x0a3c, 0, {0x05,0xd0,0x04} },
+{ 14, 0x0a3f, 0, {0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0,0x04,0x90,0x7f,0x96} },
+{ 14, 0x0a4d, 0, {0xe0,0xfa,0x90,0x7f,0x96,0x74,0x7f,0x5a,0xf0,0x90,0x7f,0x97,0x74,0x08} },
+{ 10, 0x0a5b, 0, {0xf0,0xc3,0xec,0x94,0x00,0xed,0x94,0x02,0x40,0x08} },
+{  8, 0x0a65, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x20,0xe6,0x08} },
+{  8, 0x0a6d, 0, {0xc3,0xe4,0x9c,0x74,0x08,0x9d,0x50,0x13} },
+{ 14, 0x0a75, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x40,0x65,0x02,0xf0,0x7c} },
+{  5, 0x0a83, 0, {0x00,0x7d,0x00,0x80,0x05} },
+{  5, 0x0a88, 0, {0x0c,0xbc,0x00,0x01,0x0d} },
+{  5, 0x0a8d, 0, {0xe5,0x38,0xb4,0x01,0x0e} },
+{ 13, 0x0a92, 0, {0xc0,0x04,0xc0,0x05,0x12,0x04,0xf7,0xd0,0x05,0xd0,0x04,0x75,0x38} },
+{  1, 0x0a9f, 0, {0x00} },
+{  7, 0x0aa0, 0, {0xe5,0x31,0x70,0x03,0x02,0x09,0x2a} },
+{ 10, 0x0aa7, 0, {0x90,0x7f,0xc9,0xe0,0xfa,0x70,0x03,0x02,0x0c,0x2d} },
+{ 14, 0x0ab1, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x65,0x02,0xf0,0x90} },
+{  9, 0x0abf, 0, {0x7d,0xc0,0xe0,0xfa,0xba,0x2c,0x02,0x80,0x03} },
+{  3, 0x0ac8, 0, {0x02,0x0b,0x36} },
+{  5, 0x0acb, 0, {0x75,0x32,0x00,0x7b,0x00} },
+{  3, 0x0ad0, 0, {0xbb,0x64,0x00} },
+{  2, 0x0ad3, 0, {0x50,0x1c} },
+{ 14, 0x0ad5, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} },
+{ 13, 0x0ae3, 0, {0x04,0xd0,0x03,0xd0,0x02,0x90,0x88,0x0f,0xe0,0xf5,0x47,0x0b,0x80} },
+{  1, 0x0af0, 0, {0xdf} },
+{ 13, 0x0af1, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x07,0x1e,0x12,0x03,0xe1,0x12} },
+{ 12, 0x0afe, 0, {0x04,0xf7,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x75,0x6e,0x00,0x75} },
+{ 13, 0x0b0a, 0, {0x6f,0x01,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x11,0x44,0xd0,0x05} },
+{  9, 0x0b17, 0, {0xd0,0x04,0xd0,0x02,0x75,0x70,0x4d,0x75,0x71} },
+{ 11, 0x0b20, 0, {0x0c,0x75,0x72,0x02,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12} },
+{ 11, 0x0b2b, 0, {0x11,0x75,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x02,0x0c,0x2d} },
+{  3, 0x0b36, 0, {0xba,0x2a,0x3b} },
+{ 13, 0x0b39, 0, {0x90,0x7f,0x98,0x74,0x20,0xf0,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12} },
+{ 14, 0x0b46, 0, {0x01,0xdd,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x90,0x7f,0x98,0x74,0x28,0xf0} },
+{  2, 0x0b54, 0, {0x7b,0x00} },
+{  3, 0x0b56, 0, {0xbb,0x0a,0x00} },
+{  5, 0x0b59, 0, {0x40,0x03,0x02,0x0c,0x2d} },
+{ 14, 0x0b5e, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} },
+{  8, 0x0b6c, 0, {0x04,0xd0,0x03,0xd0,0x02,0x0b,0x80,0xe2} },
+{  3, 0x0b74, 0, {0xba,0x2b,0x1a} },
+{  8, 0x0b77, 0, {0x90,0x7f,0xc9,0xe0,0xfb,0xbb,0x40,0x12} },
+{ 14, 0x0b7f, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x12,0x05,0xd0,0x05,0xd0,0x04,0xd0} },
+{  4, 0x0b8d, 0, {0x02,0x02,0x0c,0x2d} },
+{  3, 0x0b91, 0, {0xba,0x10,0x1f} },
+{ 14, 0x0b94, 0, {0x90,0x7f,0x96,0xe0,0xfb,0x90,0x7f,0x96,0x74,0x80,0x65,0x03,0xf0,0xc0} },
+{ 14, 0x0ba2, 0, {0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x3d,0xd0,0x05,0xd0,0x04,0xd0,0x02} },
+{  3, 0x0bb0, 0, {0x02,0x0c,0x2d} },
+{  3, 0x0bb3, 0, {0xba,0x11,0x12} },
+{ 14, 0x0bb6, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x6a,0xd0,0x05,0xd0,0x04,0xd0} },
+{  4, 0x0bc4, 0, {0x02,0x02,0x0c,0x2d} },
+{  3, 0x0bc8, 0, {0xba,0x12,0x12} },
+{ 14, 0x0bcb, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x8f,0xd0,0x05,0xd0,0x04,0xd0} },
+{  4, 0x0bd9, 0, {0x02,0x02,0x0c,0x2d} },
+{  3, 0x0bdd, 0, {0xba,0x13,0x0b} },
+{ 11, 0x0be0, 0, {0x90,0x7d,0xc1,0xe0,0xfb,0x90,0x88,0x00,0xf0,0x80,0x42} },
+{  3, 0x0beb, 0, {0xba,0x14,0x11} },
+{ 14, 0x0bee, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x11,0xdd,0xd0,0x05,0xd0,0x04,0xd0} },
+{  3, 0x0bfc, 0, {0x02,0x80,0x2e} },
+{  3, 0x0bff, 0, {0xba,0x15,0x1d} },
+{ 12, 0x0c02, 0, {0x90,0x7d,0xc1,0xe0,0xf5,0x75,0x90,0x7d,0xc2,0xe0,0xf5,0x76} },
+{ 14, 0x0c0e, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0,0x05,0xd0,0x04,0xd0} },
+{  3, 0x0c1c, 0, {0x02,0x80,0x0e} },
+{  3, 0x0c1f, 0, {0xba,0x16,0x0b} },
+{ 11, 0x0c22, 0, {0xc0,0x04,0xc0,0x05,0x12,0x13,0xa3,0xd0,0x05,0xd0,0x04} },
+{ 11, 0x0c2d, 0, {0x90,0x7f,0xc9,0xe4,0xf0,0x75,0x31,0x00,0x02,0x09,0x2a} },
+{  1, 0x0c38, 0, {0x22} },
+{  7, 0x0c39, 0, {0x53,0x55,0x50,0x45,0x4e,0x44,0x00} },
+{  7, 0x0c40, 0, {0x52,0x45,0x53,0x55,0x4d,0x45,0x00} },
+{  6, 0x0c47, 0, {0x20,0x56,0x6f,0x6c,0x20,0x00} },
+{ 13, 0x0c4d, 0, {0x44,0x41,0x42,0x55,0x53,0x42,0x20,0x76,0x31,0x2e,0x30,0x30,0x00} },
+{ 14, 0x0c5a, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} },
+{ 14, 0x0c68, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} },
+{ 13, 0x0c76, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} },
+{ 14, 0x0c83, 0, {0x7f,0xab,0x74,0x01,0xf0,0x90,0x7f,0xe8,0xe0,0xfa,0x90,0x7f,0xe9,0xe0} },
+{  6, 0x0c91, 0, {0xfb,0xbb,0x00,0x02,0x80,0x03} },
+{  3, 0x0c97, 0, {0x02,0x0d,0x38} },
+{  3, 0x0c9a, 0, {0xba,0x80,0x14} },
+{ 14, 0x0c9d, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5} },
+{  6, 0x0cab, 0, {0x74,0x02,0xf0,0x02,0x0e,0xcd} },
+{  5, 0x0cb1, 0, {0xba,0x82,0x02,0x80,0x03} },
+{  3, 0x0cb6, 0, {0x02,0x0d,0x1d} },
+{  8, 0x0cb9, 0, {0x90,0x7f,0xec,0xe0,0xfc,0xbc,0x01,0x00} },
+{  2, 0x0cc1, 0, {0x40,0x21} },
+{  6, 0x0cc3, 0, {0xc3,0x74,0x07,0x9c,0x40,0x1b} },
+{ 14, 0x0cc9, 0, {0xec,0x24,0xff,0x25,0xe0,0xfd,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x7f,0xf5} },
+{ 13, 0x0cd7, 0, {0x83,0xe0,0xfd,0x53,0x05,0x01,0x90,0x7f,0x00,0xed,0xf0,0x80,0x2b} },
+{  3, 0x0ce4, 0, {0xbc,0x81,0x00} },
+{  2, 0x0ce7, 0, {0x40,0x21} },
+{  6, 0x0ce9, 0, {0xc3,0x74,0x87,0x9c,0x40,0x1b} },
+{ 14, 0x0cef, 0, {0xec,0x24,0x7f,0x25,0xe0,0xfc,0x24,0xb6,0xf5,0x82,0xe4,0x34,0x7f,0xf5} },
+{ 13, 0x0cfd, 0, {0x83,0xe0,0xfc,0x53,0x04,0x01,0x90,0x7f,0x00,0xec,0xf0,0x80,0x05} },
+{  5, 0x0d0a, 0, {0x90,0x7f,0x00,0xe4,0xf0} },
+{ 14, 0x0d0f, 0, {0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5,0x74,0x02,0xf0,0x02,0x0e,0xcd} },
+{  5, 0x0d1d, 0, {0xba,0x81,0x02,0x80,0x03} },
+{  3, 0x0d22, 0, {0x02,0x0e,0xc5} },
+{ 14, 0x0d25, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5,0x74} },
+{  5, 0x0d33, 0, {0x02,0xf0,0x02,0x0e,0xcd} },
+{  3, 0x0d38, 0, {0xbb,0x01,0x2d} },
+{  6, 0x0d3b, 0, {0xba,0x00,0x03,0x02,0x0e,0xcd} },
+{  3, 0x0d41, 0, {0xba,0x02,0x11} },
+{ 13, 0x0d44, 0, {0x75,0x59,0x00,0xc0,0x02,0xc0,0x03,0x12,0x0e,0xf0,0xd0,0x03,0xd0} },
+{  4, 0x0d51, 0, {0x02,0x02,0x0e,0xcd} },
+{  5, 0x0d55, 0, {0xba,0x21,0x02,0x80,0x03} },
+{  3, 0x0d5a, 0, {0x02,0x0e,0xcd} },
+{ 11, 0x0d5d, 0, {0x75,0x37,0x01,0x90,0x7f,0xc5,0xe4,0xf0,0x02,0x0e,0xcd} },
+{  3, 0x0d68, 0, {0xbb,0x03,0x1f} },
+{  6, 0x0d6b, 0, {0xba,0x00,0x03,0x02,0x0e,0xcd} },
+{  5, 0x0d71, 0, {0xba,0x02,0x02,0x80,0x03} },
+{  3, 0x0d76, 0, {0x02,0x0e,0xcd} },
+{ 13, 0x0d79, 0, {0x75,0x59,0x01,0xc0,0x02,0xc0,0x03,0x12,0x0e,0xf0,0xd0,0x03,0xd0} },
+{  4, 0x0d86, 0, {0x02,0x02,0x0e,0xcd} },
+{  3, 0x0d8a, 0, {0xbb,0x06,0x54} },
+{  5, 0x0d8d, 0, {0xba,0x80,0x02,0x80,0x03} },
+{  3, 0x0d92, 0, {0x02,0x0e,0xc5} },
+{  8, 0x0d95, 0, {0x90,0x7f,0xeb,0xe0,0xfc,0xbc,0x01,0x15} },
+{ 12, 0x0d9d, 0, {0x7c,0xfb,0x7d,0x0f,0x8d,0x06,0x7f,0x00,0x90,0x7f,0xd4,0xee} },
+{  9, 0x0da9, 0, {0xf0,0x90,0x7f,0xd5,0xec,0xf0,0x02,0x0e,0xcd} },
+{ 10, 0x0db2, 0, {0x90,0x7f,0xeb,0xe0,0xfc,0xbc,0x02,0x02,0x80,0x03} },
+{  3, 0x0dbc, 0, {0x02,0x0e,0xc5} },
+{ 10, 0x0dbf, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xbc,0x00,0x02,0x80,0x03} },
+{  3, 0x0dc9, 0, {0x02,0x0e,0xc5} },
+{ 12, 0x0dcc, 0, {0x7c,0x3b,0x7d,0x0f,0x8d,0x06,0x7f,0x00,0x90,0x7f,0xd4,0xee} },
+{  9, 0x0dd8, 0, {0xf0,0x90,0x7f,0xd5,0xec,0xf0,0x02,0x0e,0xcd} },
+{  6, 0x0de1, 0, {0xbb,0x07,0x03,0x02,0x0e,0xc5} },
+{  3, 0x0de7, 0, {0xbb,0x08,0x10} },
+{ 13, 0x0dea, 0, {0xac,0x48,0x90,0x7f,0x00,0xec,0xf0,0x90,0x7f,0xb5,0x74,0x01,0xf0} },
+{  3, 0x0df7, 0, {0x02,0x0e,0xcd} },
+{  3, 0x0dfa, 0, {0xbb,0x09,0x31} },
+{  5, 0x0dfd, 0, {0xba,0x00,0x02,0x80,0x03} },
+{  3, 0x0e02, 0, {0x02,0x0e,0xc5} },
+{ 14, 0x0e05, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xc3,0x74,0x01,0x9c,0x50,0x03,0x02,0x0e,0xc5} },
+{  8, 0x0e13, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xbc,0x00,0x0a} },
+{ 10, 0x0e1b, 0, {0x90,0x17,0x21,0xe4,0xf0,0x90,0x17,0x22,0xe4,0xf0} },
+{  9, 0x0e25, 0, {0x90,0x7f,0xea,0xe0,0xf5,0x48,0x02,0x0e,0xcd} },
+{  3, 0x0e2e, 0, {0xbb,0x0a,0x27} },
+{  5, 0x0e31, 0, {0xba,0x81,0x02,0x80,0x03} },
+{  3, 0x0e36, 0, {0x02,0x0e,0xc5} },
+{ 14, 0x0e39, 0, {0x90,0x7f,0xec,0xe0,0xfa,0x24,0x20,0xfa,0xe4,0x34,0x17,0xfc,0x8a,0x82} },
+{ 14, 0x0e47, 0, {0x8c,0x83,0xe0,0xfa,0x90,0x7f,0x00,0xf0,0x90,0x7f,0xb5,0x74,0x01,0xf0} },
+{  3, 0x0e55, 0, {0x02,0x0e,0xcd} },
+{  5, 0x0e58, 0, {0xbb,0x0b,0x02,0x80,0x03} },
+{  3, 0x0e5d, 0, {0x02,0x0e,0xa9} },
+{ 13, 0x0e60, 0, {0x90,0x17,0x20,0xe4,0xf0,0x90,0x7f,0xec,0xe0,0xfa,0xba,0x01,0x1a} },
+{  8, 0x0e6d, 0, {0x90,0x7f,0xed,0xe0,0xfa,0xba,0x00,0x12} },
+{ 14, 0x0e75, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x90,0x17,0x21,0xf0,0xc0,0x03,0x12,0x04,0xe2} },
+{  4, 0x0e83, 0, {0xd0,0x03,0x80,0x46} },
+{  8, 0x0e87, 0, {0x90,0x7f,0xec,0xe0,0xfa,0xba,0x02,0x3e} },
+{  8, 0x0e8f, 0, {0x90,0x7f,0xed,0xe0,0xfa,0xba,0x00,0x36} },
+{ 13, 0x0e97, 0, {0xc0,0x03,0x12,0x04,0xef,0xd0,0x03,0x90,0x7f,0xea,0xe0,0xfa,0x90} },
+{  5, 0x0ea4, 0, {0x17,0x22,0xf0,0x80,0x24} },
+{  5, 0x0ea9, 0, {0xbb,0x12,0x02,0x80,0x17} },
+{  5, 0x0eae, 0, {0xbb,0x81,0x02,0x80,0x0d} },
+{  5, 0x0eb3, 0, {0xbb,0x83,0x02,0x80,0x08} },
+{  5, 0x0eb8, 0, {0xbb,0x82,0x02,0x80,0x03} },
+{  3, 0x0ebd, 0, {0xbb,0x84,0x05} },
+{  5, 0x0ec0, 0, {0x12,0x06,0x4e,0x80,0x08} },
+{  8, 0x0ec5, 0, {0x90,0x7f,0xb4,0x74,0x03,0xf0,0x80,0x06} },
+{  6, 0x0ecd, 0, {0x90,0x7f,0xb4,0x74,0x02,0xf0} },
+{  2, 0x0ed3, 0, {0xd0,0x86} },
+{ 14, 0x0ed5, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} },
+{ 13, 0x0ee3, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} },
+{ 11, 0x0ef0, 0, {0x90,0x7f,0xec,0xe0,0xf5,0x5a,0xc3,0x94,0x01,0x40,0x1d} },
+{  7, 0x0efb, 0, {0xc3,0x74,0x07,0x95,0x5a,0x40,0x16} },
+{ 13, 0x0f02, 0, {0xe5,0x5a,0x24,0xff,0x25,0xe0,0xfa,0x24,0xc6,0xf5,0x82,0xe4,0x34} },
+{  9, 0x0f0f, 0, {0x7f,0xf5,0x83,0xaa,0x59,0xea,0xf0,0x80,0x22} },
+{  7, 0x0f18, 0, {0xc3,0xe5,0x5a,0x94,0x81,0x40,0x1b} },
+{  7, 0x0f1f, 0, {0xc3,0x74,0x87,0x95,0x5a,0x40,0x14} },
+{ 13, 0x0f26, 0, {0xe5,0x5a,0x24,0xff,0x25,0xe0,0xfa,0x24,0xb6,0xf5,0x82,0xe4,0x34} },
+{  7, 0x0f33, 0, {0x7f,0xf5,0x83,0xaa,0x59,0xea,0xf0} },
+{  1, 0x0f3a, 0, {0x22} },
+{ 14, 0x0f3b, 0, {0x09,0x02,0xba,0x00,0x03,0x01,0x00,0x40,0x00,0x09,0x04,0x00,0x00,0x00} },
+{ 14, 0x0f49, 0, {0x01,0x01,0x00,0x00,0x09,0x24,0x01,0x00,0x01,0x3d,0x00,0x01,0x01,0x0c} },
+{ 14, 0x0f57, 0, {0x24,0x02,0x01,0x10,0x07,0x00,0x02,0x03,0x00,0x00,0x00,0x0d,0x24,0x06} },
+{ 14, 0x0f65, 0, {0x03,0x01,0x02,0x15,0x00,0x03,0x00,0x03,0x00,0x00,0x09,0x24,0x03,0x02} },
+{ 14, 0x0f73, 0, {0x01,0x01,0x00,0x01,0x00,0x09,0x24,0x03,0x04,0x02,0x03,0x00,0x03,0x00} },
+{ 14, 0x0f81, 0, {0x09,0x24,0x03,0x05,0x03,0x06,0x00,0x01,0x00,0x09,0x04,0x01,0x00,0x00} },
+{ 14, 0x0f8f, 0, {0x01,0x02,0x00,0x00,0x09,0x04,0x01,0x01,0x01,0x01,0x02,0x00,0x00,0x07} },
+{ 14, 0x0f9d, 0, {0x24,0x01,0x02,0x01,0x01,0x00,0x0b,0x24,0x02,0x01,0x02,0x02,0x10,0x01} },
+{ 14, 0x0fab, 0, {0x80,0xbb,0x00,0x09,0x05,0x88,0x05,0x00,0x01,0x01,0x00,0x00,0x07,0x25} },
+{ 14, 0x0fb9, 0, {0x01,0x00,0x00,0x00,0x00,0x09,0x04,0x02,0x00,0x02,0x00,0x00,0x00,0x00} },
+{ 14, 0x0fc7, 0, {0x07,0x05,0x82,0x02,0x40,0x00,0x00,0x07,0x05,0x02,0x02,0x40,0x00,0x00} },
+{ 14, 0x0fd5, 0, {0x09,0x04,0x02,0x01,0x03,0x00,0x00,0x00,0x00,0x07,0x05,0x82,0x02,0x40} },
+{ 14, 0x0fe3, 0, {0x00,0x00,0x07,0x05,0x02,0x02,0x40,0x00,0x00,0x09,0x05,0x89,0x05,0xa0} },
+{ 10, 0x0ff1, 0, {0x01,0x01,0x00,0x00,0x00,0xff,0xff,0xff,0xff,0x00} },
+{ 14, 0x0ffb, 0, {0x12,0x01,0x00,0x01,0x00,0x00,0x00,0x40,0x47,0x05,0x99,0x99,0x00,0x01} },
+{ 14, 0x1009, 0, {0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x09,0x02,0xba} },
+{  4, 0x1017, 0, {0x00,0x03,0x01,0x00} },
+{  2, 0x101b, 0, {0x7a,0x00} },
+{  3, 0x101d, 0, {0xba,0x05,0x00} },
+{  2, 0x1020, 0, {0x50,0x17} },
+{  8, 0x1022, 0, {0x90,0x7f,0xa5,0xe0,0xfb,0x30,0xe0,0x05} },
+{  5, 0x102a, 0, {0x90,0x00,0x01,0x80,0x0d} },
+{ 10, 0x102f, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xe4} },
+{  3, 0x1039, 0, {0x90,0x00,0x01} },
+{  1, 0x103c, 0, {0x22} },
+{ 14, 0x103d, 0, {0x90,0x7d,0xc1,0xe0,0xf9,0xa3,0xe0,0xfa,0xa3,0xe0,0xfb,0x7c,0x00,0x7d} },
+{  4, 0x104b, 0, {0x7e,0xeb,0x60,0x12} },
+{ 14, 0x104f, 0, {0x89,0x82,0x8a,0x83,0xe0,0xa3,0xa9,0x82,0xaa,0x83,0x8c,0x82,0x8d,0x83} },
+{  4, 0x105d, 0, {0xf0,0x0c,0xdb,0xee} },
+{  8, 0x1061, 0, {0x90,0x7d,0xc3,0xe0,0x90,0x7f,0xb9,0xf0} },
+{  1, 0x1069, 0, {0x22} },
+{ 14, 0x106a, 0, {0x90,0x7d,0xc1,0xe0,0xf9,0xa3,0xe0,0xfa,0xa3,0xe0,0xfb,0x7c,0xc4,0x7d} },
+{  4, 0x1078, 0, {0x7d,0xeb,0x60,0xe5} },
+{ 14, 0x107c, 0, {0x8c,0x82,0x8d,0x83,0xe0,0x0c,0x89,0x82,0x8a,0x83,0xf0,0xa3,0xa9,0x82} },
+{  4, 0x108a, 0, {0xaa,0x83,0xdb,0xee} },
+{  1, 0x108e, 0, {0x22} },
+{ 14, 0x108f, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x05,0x86,0x90,0x7d,0xc1,0xe0,0x05,0x86} },
+{ 14, 0x109d, 0, {0xa3,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa6,0x05,0x86,0xa3,0xa3,0xe0,0xf9} },
+{  5, 0x10ab, 0, {0x60,0x16,0xa3,0x05,0x86} },
+{ 13, 0x10b0, 0, {0x90,0x7f,0xa6,0x05,0x86,0xe0,0xa3,0x05,0x86,0xf0,0xc0,0x01,0x12} },
+{  6, 0x10bd, 0, {0x10,0x1b,0xd0,0x01,0xd9,0xed} },
+{  6, 0x10c3, 0, {0x90,0x7f,0xa5,0x74,0x40,0xf0} },
+{  1, 0x10c9, 0, {0x22} },
+{  8, 0x10ca, 0, {0x90,0x88,0x02,0x74,0x01,0xf0,0x7a,0x00} },
+{  3, 0x10d2, 0, {0xba,0xff,0x00} },
+{  2, 0x10d5, 0, {0x50,0x0a} },
+{ 10, 0x10d7, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xf1} },
+{  1, 0x10e1, 0, {0x22} },
+{  5, 0x10e2, 0, {0xe5,0x6b,0xb4,0xc0,0x08} },
+{  8, 0x10e7, 0, {0x90,0x88,0x03,0xe5,0x6c,0xf0,0x80,0x06} },
+{  6, 0x10ef, 0, {0x90,0x88,0x02,0xe5,0x6c,0xf0} },
+{  4, 0x10f5, 0, {0x7a,0x00,0x7b,0x00} },
+{ 11, 0x10f9, 0, {0xc3,0xea,0x94,0x32,0xeb,0x64,0x80,0x94,0x80,0x50,0x07} },
+{  5, 0x1104, 0, {0x0a,0xba,0x00,0x01,0x0b} },
+{  2, 0x1109, 0, {0x80,0xee} },
+{  1, 0x110b, 0, {0x22} },
+{ 10, 0x110c, 0, {0x90,0x88,0x03,0xe5,0x6d,0xf0,0x05,0x39,0x7a,0x00} },
+{  3, 0x1116, 0, {0xba,0x28,0x00} },
+{  2, 0x1119, 0, {0x50,0x03} },
+{  3, 0x111b, 0, {0x0a,0x80,0xf8} },
+{  5, 0x111e, 0, {0xe5,0x39,0xb4,0x10,0x08} },
+{  8, 0x1123, 0, {0x90,0x88,0x02,0x74,0xc0,0xf0,0x80,0x0e} },
+{  5, 0x112b, 0, {0xe5,0x39,0xb4,0x20,0x09} },
+{  9, 0x1130, 0, {0x90,0x88,0x02,0x74,0x80,0xf0,0x75,0x39,0x00} },
+{  2, 0x1139, 0, {0x7a,0x00} },
+{  3, 0x113b, 0, {0xba,0x28,0x00} },
+{  2, 0x113e, 0, {0x50,0x03} },
+{  3, 0x1140, 0, {0x0a,0x80,0xf8} },
+{  1, 0x1143, 0, {0x22} },
+{  4, 0x1144, 0, {0xe5,0x6f,0x60,0x02} },
+{  2, 0x1148, 0, {0x80,0x07} },
+{  7, 0x114a, 0, {0x7a,0x00,0x75,0x39,0x00,0x80,0x05} },
+{  5, 0x1151, 0, {0x7a,0x40,0x75,0x39,0x10} },
+{  9, 0x1156, 0, {0xe5,0x6e,0x2a,0xfa,0xe5,0x6e,0x25,0x39,0xf5} },
+{ 10, 0x115f, 0, {0x39,0x90,0x88,0x02,0x74,0x80,0x2a,0xf0,0x7a,0x00} },
+{  8, 0x1169, 0, {0xc3,0xea,0x64,0x80,0x94,0xa8,0x50,0x03} },
+{  3, 0x1171, 0, {0x0a,0x80,0xf5} },
+{  1, 0x1174, 0, {0x22} },
+{  6, 0x1175, 0, {0xaa,0x70,0xab,0x71,0xac,0x72} },
+{ 12, 0x117b, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x12,0x14,0xee,0xfd,0x60,0x18} },
+{ 13, 0x1187, 0, {0x8d,0x6d,0xc0,0x02,0xc0,0x03,0xc0,0x04,0x12,0x11,0x0c,0xd0,0x04} },
+{  9, 0x1194, 0, {0xd0,0x03,0xd0,0x02,0x0a,0xba,0x00,0x01,0x0b} },
+{  2, 0x119d, 0, {0x80,0xdc} },
+{  1, 0x119f, 0, {0x22} },
+{ 13, 0x11a0, 0, {0xe5,0x73,0xc4,0x54,0x0f,0xfa,0x53,0x02,0x0f,0xc3,0x74,0x09,0x9a} },
+{  2, 0x11ad, 0, {0x50,0x06} },
+{  6, 0x11af, 0, {0x74,0x37,0x2a,0xfb,0x80,0x04} },
+{  4, 0x11b5, 0, {0x74,0x30,0x2a,0xfb} },
+{ 12, 0x11b9, 0, {0x8b,0x6d,0xc0,0x03,0x12,0x11,0x0c,0xd0,0x03,0xaa,0x73,0x53} },
+{  8, 0x11c5, 0, {0x02,0x0f,0xc3,0x74,0x09,0x9a,0x50,0x06} },
+{  6, 0x11cd, 0, {0x74,0x37,0x2a,0xfb,0x80,0x04} },
+{  4, 0x11d3, 0, {0x74,0x30,0x2a,0xfb} },
+{  5, 0x11d7, 0, {0x8b,0x6d,0x12,0x11,0x0c} },
+{  1, 0x11dc, 0, {0x22} },
+{  7, 0x11dd, 0, {0x90,0x7d,0xc3,0xe0,0xfa,0x60,0x0f} },
+{ 12, 0x11e4, 0, {0x90,0x7d,0xc1,0xe0,0xf5,0x6e,0x90,0x7d,0xc2,0xe0,0xf5,0x6f} },
+{  3, 0x11f0, 0, {0x12,0x11,0x44} },
+{ 12, 0x11f3, 0, {0x90,0x7d,0xff,0xe4,0xf0,0x75,0x70,0xc4,0x75,0x71,0x7d,0x75} },
+{  5, 0x11ff, 0, {0x72,0x01,0x12,0x11,0x75} },
+{  1, 0x1204, 0, {0x22} },
+{  2, 0x1205, 0, {0x7a,0x04} },
+{  3, 0x1207, 0, {0xba,0x40,0x00} },
+{  2, 0x120a, 0, {0x50,0x36} },
+{ 14, 0x120c, 0, {0xea,0x24,0xc0,0xf5,0x82,0xe4,0x34,0x7d,0xf5,0x83,0xe0,0xfb,0x7c,0x00} },
+{  3, 0x121a, 0, {0xbc,0x08,0x00} },
+{  2, 0x121d, 0, {0x50,0x20} },
+{  6, 0x121f, 0, {0x8b,0x05,0xed,0x30,0xe7,0x0b} },
+{ 11, 0x1225, 0, {0x90,0x7f,0x96,0x74,0x42,0xf0,0x74,0xc3,0xf0,0x80,0x08} },
+{  8, 0x1230, 0, {0x90,0x7f,0x96,0xe4,0xf0,0x74,0x81,0xf0} },
+{  7, 0x1238, 0, {0xeb,0x25,0xe0,0xfb,0x0c,0x80,0xdb} },
+{  3, 0x123f, 0, {0x0a,0x80,0xc5} },
+{  1, 0x1242, 0, {0x22} },
+{  4, 0x1243, 0, {0x7a,0x00,0x7b,0xef} },
+{  3, 0x1247, 0, {0xba,0x10,0x00} },
+{  2, 0x124a, 0, {0x50,0x20} },
+{ 14, 0x124c, 0, {0x74,0x11,0x2b,0xfb,0x24,0x00,0xfc,0xe4,0x34,0x18,0xfd,0x8c,0x82,0x8d} },
+{ 14, 0x125a, 0, {0x83,0xe4,0xf0,0xea,0x24,0x00,0xf5,0x82,0xe4,0x34,0x19,0xf5,0x83,0xe4} },
+{  4, 0x1268, 0, {0xf0,0x0a,0x80,0xdb} },
+{  1, 0x126c, 0, {0x22} },
+{ 14, 0x126d, 0, {0x74,0xf8,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} },
+{ 14, 0x127b, 0, {0x74,0xf9,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} },
+{ 14, 0x1289, 0, {0x74,0xfa,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} },
+{ 14, 0x1297, 0, {0x74,0xfb,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} },
+{ 14, 0x12a5, 0, {0x74,0xff,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} },
+{  1, 0x12b3, 0, {0x22} },
+{ 14, 0x12b4, 0, {0x12,0x03,0xcb,0x12,0x12,0x6d,0x7a,0xc0,0x7b,0x87,0x7c,0x01,0x74,0x01} },
+{ 14, 0x12c2, 0, {0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x74} },
+{ 14, 0x12d0, 0, {0x01,0x12,0x14,0xbf,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e} },
+{ 14, 0x12de, 0, {0x83,0x8f,0xf0,0x74,0x06,0x12,0x14,0xbf,0x74,0x01,0x2a,0xfd,0xe4,0x3b} },
+{ 14, 0x12ec, 0, {0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83,0x8c,0xf0,0xe4,0x12,0x14,0xbf,0x74} },
+{ 14, 0x12fa, 0, {0x01,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0} },
+{ 14, 0x1308, 0, {0x74,0x0b,0x12,0x14,0xbf,0x74,0x01,0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07} },
+{ 14, 0x1316, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x74,0x08,0x12,0x14,0xbf,0x74,0x01,0x2d} },
+{ 14, 0x1324, 0, {0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0,0x74,0x01} },
+{ 14, 0x1332, 0, {0x12,0x14,0xbf,0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83} },
+{ 14, 0x1340, 0, {0x8c,0xf0,0xe4,0x12,0x14,0xbf,0x74,0x01,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f} },
+{ 14, 0x134e, 0, {0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0,0x74,0x03,0x12,0x14,0xbf,0x7d,0x00} },
+{  3, 0x135c, 0, {0xbd,0x06,0x00} },
+{  2, 0x135f, 0, {0x50,0x12} },
+{ 11, 0x1361, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x0a,0xba,0x00,0x01,0x0b} },
+{  7, 0x136c, 0, {0xe4,0x12,0x14,0xbf,0x0d,0x80,0xe9} },
+{ 13, 0x1373, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0xe5,0x74,0x12,0x14,0xbf,0x74,0xf9} },
+{ 14, 0x1380, 0, {0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0x74,0x0f,0xf0,0x74} },
+{ 14, 0x138e, 0, {0xfe,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0x74,0x01,0xf0} },
+{  6, 0x139c, 0, {0x12,0x03,0xe1,0x12,0x04,0xf7} },
+{  1, 0x13a2, 0, {0x22} },
+{ 13, 0x13a3, 0, {0x90,0x7d,0xc1,0xe0,0xfa,0x24,0x00,0xfb,0xe4,0x34,0x19,0xfc,0x90} },
+{ 14, 0x13b0, 0, {0x7d,0xc2,0xe0,0xfd,0x8b,0x82,0x8c,0x83,0xf0,0x75,0xf0,0x11,0xea,0xa4} },
+{  3, 0x13be, 0, {0xfa,0x7b,0x00} },
+{  3, 0x13c1, 0, {0xbb,0x10,0x00} },
+{  2, 0x13c4, 0, {0x50,0x24} },
+{ 14, 0x13c6, 0, {0xea,0x24,0x00,0xfc,0xe4,0x34,0x18,0xfd,0xeb,0x2c,0xfc,0xe4,0x3d,0xfd} },
+{ 14, 0x13d4, 0, {0x74,0x04,0x2b,0x24,0xc0,0xf5,0x82,0xe4,0x34,0x7d,0xf5,0x83,0xe0,0xfe} },
+{  8, 0x13e2, 0, {0x8c,0x82,0x8d,0x83,0xf0,0x0b,0x80,0xd7} },
+{ 14, 0x13ea, 0, {0xea,0x24,0x00,0xfa,0xe4,0x34,0x18,0xfb,0x74,0x10,0x2a,0xf5,0x82,0xe4} },
+{  5, 0x13f8, 0, {0x3b,0xf5,0x83,0xe4,0xf0} },
+{  1, 0x13fd, 0, {0x22} },
+{  4, 0x13fe, 0, {0xe5,0x76,0x60,0x02} },
+{  2, 0x1402, 0, {0x80,0x16} },
+{ 12, 0x1404, 0, {0x74,0x0f,0x55,0x75,0xfa,0x8a,0x75,0x24,0x00,0xf5,0x82,0xe4} },
+{ 10, 0x1410, 0, {0x34,0x19,0xf5,0x83,0xe0,0xf5,0x74,0x12,0x12,0xb4} },
+{ 10, 0x141a, 0, {0x12,0x10,0xca,0x75,0x6e,0x00,0x75,0x6f,0x00,0x12} },
+{  6, 0x1424, 0, {0x11,0x44,0x75,0x70,0xb9,0x75} },
+{  6, 0x142a, 0, {0x71,0x14,0x75,0x72,0x02,0x12} },
+{ 11, 0x1430, 0, {0x11,0x75,0xe5,0x76,0xb4,0x02,0x04,0x74,0x01,0x80,0x01} },
+{  1, 0x143b, 0, {0xe4} },
+{  3, 0x143c, 0, {0xfa,0x70,0x0f} },
+{ 12, 0x143f, 0, {0x74,0x01,0x25,0x75,0xf5,0x73,0xc0,0x02,0x12,0x11,0xa0,0xd0} },
+{  3, 0x144b, 0, {0x02,0x80,0x0a} },
+{ 10, 0x144e, 0, {0x85,0x75,0x73,0xc0,0x02,0x12,0x11,0xa0,0xd0,0x02} },
+{ 12, 0x1458, 0, {0x75,0x6e,0x00,0x75,0x6f,0x01,0xc0,0x02,0x12,0x11,0x44,0xd0} },
+{  4, 0x1464, 0, {0x02,0xea,0x70,0x1a} },
+{ 13, 0x1468, 0, {0x75,0xf0,0x11,0xe5,0x75,0xa4,0xfa,0x24,0x00,0xfa,0xe4,0x34,0x18} },
+{  9, 0x1475, 0, {0xfb,0x8a,0x70,0x8b,0x71,0x75,0x72,0x01,0x12} },
+{  4, 0x147e, 0, {0x11,0x75,0x80,0x36} },
+{  2, 0x1482, 0, {0x7a,0x00} },
+{  3, 0x1484, 0, {0xba,0x10,0x00} },
+{  2, 0x1487, 0, {0x50,0x2f} },
+{ 13, 0x1489, 0, {0xea,0x24,0x00,0xf5,0x82,0xe4,0x34,0x19,0xf5,0x83,0xe0,0xfb,0xe5} },
+{  4, 0x1496, 0, {0x75,0xb5,0x03,0x1b} },
+{ 14, 0x149a, 0, {0x75,0xf0,0x11,0xea,0xa4,0xfb,0x24,0x00,0xfb,0xe4,0x34,0x18,0xfc,0x8b} },
+{  9, 0x14a8, 0, {0x70,0x8c,0x71,0x75,0x72,0x01,0xc0,0x02,0x12} },
+{  4, 0x14b1, 0, {0x11,0x75,0xd0,0x02} },
+{  3, 0x14b5, 0, {0x0a,0x80,0xcc} },
+{  1, 0x14b8, 0, {0x22} },
+{  6, 0x14b9, 0, {0x50,0x72,0x6f,0x67,0x20,0x00} },
+{ 14, 0x14bf, 0, {0xc8,0xc0,0xe0,0xc8,0xc0,0xe0,0xe5,0xf0,0x60,0x0b,0x14,0x60,0x0f,0x14} },
+{  7, 0x14cd, 0, {0x60,0x11,0x14,0x60,0x12,0x80,0x15} },
+{  7, 0x14d4, 0, {0xd0,0xe0,0xa8,0x82,0xf6,0x80,0x0e} },
+{  5, 0x14db, 0, {0xd0,0xe0,0xf0,0x80,0x09} },
+{  4, 0x14e0, 0, {0xd0,0xe0,0x80,0x05} },
+{  5, 0x14e4, 0, {0xd0,0xe0,0xa8,0x82,0xf2} },
+{  4, 0x14e9, 0, {0xc8,0xd0,0xe0,0xc8} },
+{  1, 0x14ed, 0, {0x22} },
+{ 14, 0x14ee, 0, {0xc8,0xc0,0xe0,0xe5,0xf0,0x60,0x0d,0x14,0x60,0x0f,0x14,0x60,0x0f,0x14} },
+{  6, 0x14fc, 0, {0x60,0x10,0x74,0xff,0x80,0x0f} },
+{  5, 0x1502, 0, {0xa8,0x82,0xe6,0x80,0x0a} },
+{  3, 0x1507, 0, {0xe0,0x80,0x07} },
+{  4, 0x150a, 0, {0xe4,0x93,0x80,0x03} },
+{  3, 0x150e, 0, {0xa8,0x82,0xe2} },
+{  4, 0x1511, 0, {0xf8,0xd0,0xe0,0xc8} },
+{  1, 0x1515, 0, {0x22} },
+{  0, 0x0000, 1, {0} }
+
+};
+
+static unsigned char bitstream[] = {
+
+0x00,0x09,0x0F,0xF0,0x0F,0xF0,0x0F,0xF0, 0x0F,0xF0,0x00,0x00,0x01,0x61,0x00,0x0D,
+0x64,0x61,0x62,0x75,0x73,0x62,0x74,0x72, 0x2E,0x6E,0x63,0x64,0x00,0x62,0x00,0x0B,
+0x73,0x31,0x30,0x78,0x6C,0x76,0x71,0x31, 0x30,0x30,0x00,0x63,0x00,0x0B,0x31,0x39,
+0x39,0x39,0x2F,0x30,0x39,0x2F,0x32,0x34, 0x00,0x64,0x00,0x09,0x31,0x30,0x3A,0x34,
+0x32,0x3A,0x34,0x36,0x00,0x65,0x00,0x00, 0x2E,0xC0,0xFF,0x20,0x17,0x5F,0x9F,0x5B,
+0xFE,0xFB,0xBB,0xB7,0xBB,0xBB,0xFB,0xBF, 0xAF,0xEF,0xFB,0xDF,0xB7,0xFB,0xFB,0x7F,
+0xBF,0xB7,0xEF,0xF2,0xFF,0xFB,0xFE,0xFF, 0xFF,0xEF,0xFF,0xFE,0xFF,0xBF,0xFF,0xFF,
+0xFF,0xFF,0xAF,0xFF,0xFA,0xFF,0xFF,0xFF, 0xC9,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFB,0xFF,0xA3,0xFF,0xFB,
+0xFE,0xFF,0xBF,0xEF,0xE3,0xFE,0xFF,0xBF, 0xE3,0xFE,0xFF,0xBF,0x6F,0xFB,0xF6,0xFF,
+0xBF,0xFF,0x47,0xFF,0xFF,0x9F,0xEE,0xF9, 0xFE,0xCF,0x9F,0xEF,0xFB,0xCF,0x9B,0xEE,
+0xF8,0xFE,0xEF,0x8F,0xEE,0xFB,0xFE,0x0B, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xBF,0xFF,0xFF,0xFB,0xFF,0xFF, 0xBF,0xFF,0xFF,0xFC,0x17,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xFB,0xFF,0xFF,0x7F,0xFF,0xFF,
+0xFC,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0x5F,0xFF, 0xFF,0xFD,0xFF,0xFF,0xDB,0xFF,0xFD,0xFF,
+0x77,0xFF,0xFD,0xFF,0xFF,0xDF,0xFE,0xFD, 0xFF,0xFF,0xF2,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFD,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,
+0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xE3,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xBF,
+0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0x67,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0x7F,0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF, 0xFF,0xFF,0xDF,0xFF,0xFF,0xFF,0x2F,0xFF,
+0xF3,0xFD,0xFF,0x7F,0xDE,0xF7,0xFD,0xFF, 0x7F,0xF7,0x7D,0xFF,0x7F,0xDF,0xF7,0xBD,
+0xFF,0x7F,0xFF,0x1F,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xEF,0xFB,
+0xFE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFF, 0x3F,0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,
+0x9F,0xE7,0xFA,0x7F,0x9F,0xE7,0xF9,0xFE, 0x7F,0x9F,0xE7,0xFF,0xFC,0x7F,0xBF,0xBF,
+0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xB7, 0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,
+0xFF,0xE0,0xFD,0xF9,0xFE,0x7F,0x9F,0xE7, 0xF9,0xFE,0x7F,0x9D,0xF9,0xFE,0x7D,0x9D,
+0xE7,0xF9,0xFE,0x7F,0x9F,0xED,0xED,0xFF, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F,
+0xDF,0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF, 0x7F,0xDF,0xFF,0x9B,0xFF,0xEF,0xFB,0xFE,
+0xFB,0xBF,0xEF,0xBB,0xFE,0xFF,0xAF,0xBB, 0xBE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFF,
+0xB7,0xBF,0xDB,0xF6,0xBD,0xBF,0x6B,0xDB, 0xF6,0xF9,0xBF,0x5B,0xD6,0xF9,0xBF,0x6F,
+0xDB,0xF6,0xFD,0xBF,0xFF,0x0E,0xFF,0xFF, 0xFF,0xFF,0x5F,0xFF,0xF7,0xFF,0xFF,0x7F,
+0xF7,0xBD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xDF,0x9F,0xFF,0xFF,0xFF,0xFE,0xFF,
+0xFF,0xEF,0xFE,0xFE,0xFF,0xFF,0x77,0xFF, 0xFB,0xFB,0xFF,0xFF,0xFF,0xFF,0xF8,0x3F,
+0xFF,0xFD,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xF4,0x7F,0xFF,0xFE,0xFD, 0xBE,0xFF,0xDF,0xFE,0xFF,0xFF,0xEF,0x7F,
+0xFF,0xCF,0xFF,0xCF,0xFF,0xFF,0xFF,0xDF, 0xE6,0xFF,0xFF,0x7F,0xDF,0xF7,0xDD,0x7F,
+0x7F,0xDF,0xF7,0xFF,0x7F,0xDF,0xD7,0xFD, 0xFF,0x7F,0xDF,0xF7,0xFF,0xCD,0xFF,0xF2,
+0xFF,0xFF,0x4F,0x7F,0xF4,0xFF,0xFF,0xFF, 0xE7,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xBB,0xFF,0xEF,0xFF,0xFE,0xFF, 0xFF,0xFF,0xEF,0xFF,0xFF,0xEF,0xFF,0xFB,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x65, 0xEF,0xFF,0xFF,0x7F,0xFF,0xFD,0xEF,0xFF,
+0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xCF,0xDF,0xFE,0xFF,
+0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,0xF3,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFE,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xBF,0xFF, 0xFF,0xFF,0xE3,0x7F,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xEF,0xEB,0xFF,0xFE,0xBF,0xFF, 0xEB,0xFF,0xFC,0x7F,0xFF,0xFF,0xFF,0xEE,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDD,0xFF, 0xD6,0xFF,0xFD,0xBF,0xFF,0xFB,0xFF,0xFE,
+0xFD,0xFF,0xFF,0xFD,0xEF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xDE,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xBF,0xFF,0xFD,0xFF,0x7F,0xBF, 0xFF,0x5F,0xDF,0xFF,0xFF,0xBF,0x77,0xFF,
+0xFF,0xFF,0x7F,0xD7,0xFF,0xFF,0xFF,0xFF, 0xFF,0xC3,0xFF,0xFF,0xFF,0xFF,0xDF,0xEF,
+0xFF,0xFF,0xFE,0xFB,0xFF,0xFF,0xDF,0xBF, 0xFF,0xFF,0xFF,0xFF,0xED,0xFF,0xB7,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xAF,0x7F,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xDF,0xBF,0xDF,0xF3,0xFD,0xFB,0xFF,0x5B,
+0xFD,0xFF,0xBF,0xEF,0xF7,0xFF,0xFF,0x7D, 0xFF,0xFF,0xFF,0xFF,0xF8,0x3B,0xFF,0xBF,
+0x6F,0xFF,0xFE,0xFF,0xBF,0xFF,0xEB,0x7D, 0xFF,0xEF,0xFB,0xFE,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xF2,0x7F,0xFC,0xFF,0x3F,0xDF,0xED, 0xFE,0xFF,0xFF,0xFF,0xFF,0xEF,0x5F,0xF7,
+0xB5,0xFF,0xEF,0xFF,0xFF,0xFF,0xE0,0x3F, 0x9F,0x9E,0xFF,0xFF,0xEF,0xFF,0xDF,0xFF,
+0xBF,0x5F,0xBF,0xCF,0xF3,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0x69,0xAF,0x33,0xFD,0xFF,
+0xFB,0xFF,0xFF,0xFF,0xFF,0xFC,0xFF,0x7F, 0xD9,0xFF,0xDF,0xFF,0xFF,0xFF,0xFF,0xF5,
+0xA3,0xDF,0x6E,0xDE,0xFF,0xFF,0xBD,0xFF, 0xFF,0xFE,0xFF,0xFF,0xFF,0xFE,0xE7,0xFD,
+0xFF,0xFF,0xFF,0xF9,0xEF,0xC6,0xFE,0xB7, 0xAD,0xE5,0xF9,0xFF,0xFF,0xFF,0xCF,0xFF,
+0xFF,0xFF,0xCD,0xFB,0x7F,0xFF,0xFF,0xFF, 0xF9,0xF6,0x0F,0xDF,0xEC,0xCF,0x7F,0xFF,
+0xFB,0x7F,0xFF,0xFF,0xFF,0xFD,0xFF,0xFE, 0xF9,0xFD,0x7F,0xFF,0x7F,0xFF,0xF9,0x5B,
+0xFF,0x73,0xDC,0xFD,0x7B,0xDF,0xFF,0xFF, 0xFF,0x7B,0xFF,0xFF,0xF7,0x53,0xD6,0xFF,
+0xFF,0xFF,0xFF,0xD8,0x9F,0xFE,0xFF,0xEF, 0x7F,0xEE,0xFF,0xFF,0xFF,0xFB,0xED,0xED,
+0xFD,0xFF,0xFE,0xFF,0xFF,0xFB,0x7F,0xFF, 0xE2,0x7F,0xFF,0x6F,0xD8,0x57,0xF7,0xFF,
+0xFF,0xFF,0xDF,0xFF,0xE8,0xFF,0xFF,0xFD, 0xFF,0xFF,0xFC,0x7F,0xFF,0xE4,0xFF,0xFB,
+0xEF,0xFB,0xFE,0xDF,0xB7,0xED,0xFF,0xFE, 0xDF,0x7F,0xFF,0xFE,0x7F,0xB7,0xFF,0xFF,
+0xFF,0xFF,0x89,0xFF,0xFF,0xCF,0xF3,0xFE, 0x7F,0xFF,0xEF,0xFF,0xFE,0x7E,0x7F,0xFB,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF1, 0xFF,0xEB,0x7A,0xD5,0xBF,0x6F,0xDB,0xBE,
+0xFD,0xB7,0xD8,0xF6,0xE5,0xBF,0x6F,0xFB, 0xFE,0xF5,0xBD,0x7E,0x06,0xFF,0xDF,0xF7,
+0xFB,0xF6,0xFF,0x3F,0xFF,0xDB,0xFF,0xFF, 0x6F,0xFB,0xF7,0xFF,0xFF,0xFF,0xFB,0xFE,
+0xF7,0xAF,0xFF,0xB7,0xED,0xEF,0xF7,0xFE, 0xFF,0xFF,0xDF,0xFF,0xFE,0xFF,0xEF,0xFF,
+0xFF,0xFF,0xFF,0xBF,0xF7,0xFC,0x1F,0xEE, 0xFB,0xFE,0xBD,0xFF,0x7F,0x5F,0xD7,0xFD,
+0xFB,0x43,0xFF,0xFF,0xFD,0xFF,0x5F,0xFF, 0xF7,0xFF,0xF9,0x3F,0xFF,0xCF,0xF3,0xFD,
+0xF7,0x7E,0xEF,0xA7,0xF9,0xFE,0x8F,0xA7, 0xE9,0xF3,0x7E,0x9F,0xFB,0xF8,0xFF,0xFF,
+0x3F,0xFD,0x7F,0x5F,0xDF,0xFD,0xFF,0xFF, 0x5F,0xFF,0xFD,0x5F,0xFF,0xFF,0x7F,0xFD,
+0x7F,0xFD,0x9F,0xFF,0xE0,0xFF,0xFA,0xF8, 0xBE,0x6F,0x9F,0xE6,0xF8,0xBE,0x3F,0x9A,
+0xF9,0xBE,0x6F,0x9F,0xE2,0xF9,0xFE,0x6F, 0x9F,0xF9,0xFF,0xF5,0xFD,0x7F,0xCF,0xDF,
+0xFD,0xFD,0x7F,0xFF,0xF5,0xFF,0xFF,0xFF, 0xF7,0xF5,0xFD,0x0F,0xDB,0xFF,0xD3,0xFF,
+0xEB,0xFA,0xFF,0xFF,0xBF,0xFF,0xFA,0xFF, 0xFF,0xCB,0xFB,0xFE,0xFF,0xFF,0xEB,0xFA,
+0xFE,0xFF,0xFF,0xB7,0xFF,0xFF,0xFF,0xFF, 0xBF,0xFF,0xDF,0xF5,0xFF,0xFF,0xD7,0xFF,
+0xFF,0xFF,0xDF,0xD7,0xF5,0xFF,0x7F,0xFE, 0x4F,0xFF,0xFD,0xFF,0x7F,0x7F,0xFF,0xAD,
+0xEB,0xFB,0xFF,0xAD,0xFF,0xFF,0xFF,0xFF, 0xAF,0xEB,0xFB,0xFF,0xFC,0x0D,0xFF,0xFF,
+0xDF,0xD2,0xFD,0xFF,0xFF,0xFD,0xF6,0xFF, 0xFF,0x7F,0xFF,0xFF,0x1F,0xFF,0xFF,0xFF,
+0xFF,0xFB,0x3F,0x7D,0xEB,0x32,0xFE,0xBF, 0x2F,0xEB,0xFA,0xAE,0xBD,0xE0,0xFA,0x7E,
+0xBF,0xAD,0xEB,0xFA,0xFE,0xBF,0xF5,0x7F, 0xFF,0xDE,0xFE,0xE3,0xFB,0xFF,0xFF,0xFF,
+0xDF,0xEF,0x4F,0xDF,0xFF,0x7F,0xDF,0xFF, 0xF7,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xEF,
+0xFB,0xFF,0xFF,0xFF,0xEF,0xFF,0xFF,0xDF, 0xED,0xFB,0xDF,0xFF,0xBF,0xFF,0xFF,0xFF,
+0x81,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF, 0xFF,0xFF,0xFE,0xDD,0xFE,0xEF,0xFD,0xFF,
+0xFF,0xFB,0xFE,0xF7,0xFF,0x93,0xFD,0xFB, 0x7E,0xFF,0xFE,0x87,0xE9,0xFF,0x7F,0xB3,
+0x9F,0xFE,0xFE,0xFF,0xAF,0xFD,0xFE,0x7E, 0x3F,0xFE,0x67,0xFF,0xFF,0xF7,0xFF,0xFF,
+0xFC,0xF7,0xDF,0xFD,0xFF,0x7F,0xFF,0xFF, 0x7F,0x6D,0xFF,0xFF,0xFE,0xFF,0xFF,0x2F,
+0xFF,0xBF,0xFF,0xFF,0xEE,0xFF,0xBE,0xFF, 0xFF,0xFE,0xFF,0xEF,0xFF,0xFF,0xFE,0xFF,
+0xEF,0xFF,0xFF,0xFA,0x5F,0xFF,0xFF,0xFB, 0xFF,0xFF,0xEF,0xFF,0xFB,0xFE,0xFD,0xFF,
+0xFE,0xFF,0xFB,0xFF,0xFF,0xFF,0x7F,0xFF, 0xFE,0xBF,0xDF,0xFF,0xFB,0xFF,0xFF,0xF7,
+0xFC,0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF2,0x7F,0xFF,
+0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF, 0xF3,0xFF,0xFF,0xFF,0xEF,0xFB,0xFF,0xFF,
+0xFF,0xDF,0xE2,0xFF,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFB,0xE7,0xFF,0xFD,
+0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xED, 0xEF,0xFD,0xFF,0xFF,0xDF,0xD7,0xF5,0xFD,
+0x7F,0x5D,0xFD,0xFF,0x7F,0xDF,0x97,0xF4, 0xFD,0x7B,0x5F,0xFF,0xC9,0xFF,0xFB,0xFE,
+0xFF,0xBF,0xFF,0x5F,0xFF,0xFF,0xF7,0xFF, 0xEF,0xFD,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xF7,0xFF,0xD7,0xFD,0x7D,0x7F,0xFF, 0xFF,0xFF,0xFF,0xEF,0xDF,0xF7,0xFD,0xFF,
+0xBB,0xFF,0xFF,0x7F,0xFF,0xFE,0xE3,0xFF, 0xF9,0xFE,0x7F,0xBF,0xEF,0xFB,0xFE,0xFF,
+0xBF,0xF9,0xFE,0xFF,0x9F,0xEF,0xF9,0xFE, 0xFF,0xBF,0xF3,0xDA,0xFF,0x37,0xCD,0xF3,
+0x7C,0xDF,0x37,0xCD,0xF3,0x7F,0x37,0xCD, 0xF3,0x7C,0xDF,0x37,0xCC,0xF3,0x7F,0x5A,
+0xBD,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6,0xFD, 0xBF,0x6F,0xDE,0xFD,0xBF,0x6F,0xDB,0xF6,
+0xFD,0xBF,0x6F,0xFE,0xF1,0x6F,0xEB,0x7A, 0xDE,0xB7,0xAD,0xEB,0x7A,0xDE,0xB7,0xAF,
+0x7A,0xDE,0xB7,0xAD,0xEB,0x7A,0xDE,0xB7, 0xFF,0x7E,0xFF,0xFE,0xCD,0xB3,0x6C,0xDB,
+0x36,0xCD,0xB3,0x6C,0xDE,0xCD,0xB3,0x6C, 0xDB,0x36,0xCD,0xB3,0x6C,0xDF,0xC9,0xBF,
+0xF7,0xBD,0xEF,0x7A,0x9E,0xA7,0xA9,0xEA, 0x7A,0xB7,0xBD,0xEA,0x7B,0xDE,0xA7,0xBD,
+0xCA,0x72,0x8D,0x91,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFE,0xF7,0xEF,0xFB,
+0xFE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFE, 0x87,0xFF,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6,
+0xFD,0xBF,0x6F,0xF6,0xFD,0xBF,0x6F,0xDB, 0xF6,0xFD,0xBF,0x6F,0xFE,0x4F,0xFF,0xBF,
+0xEF,0xBB,0xEE,0xFB,0xBE,0xEF,0xBB,0xEF, 0xBE,0xEF,0xBB,0xEE,0xFB,0xBE,0xEF,0xBB,
+0xEF,0xFC,0x5F,0xFF,0xFF,0xFF,0x3F,0xCF, 0xF3,0xFC,0xFF,0x3F,0xCF,0xFC,0xFF,0x3F,
+0xCF,0xF3,0xFC,0xFF,0x3F,0xCF,0xFD,0x9F, 0xFE,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,
+0xEB,0xFE,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF, 0xAF,0xEB,0xFF,0xE1,0x6F,0xFD,0xFF,0x7F,
+0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFD,0xFF, 0x7F,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF,
+0x7A,0xBF,0xFB,0xFE,0xDF,0xB7,0xED,0xFB, 0x7E,0xDF,0xB7,0xFB,0x7E,0xDF,0xB7,0xED,
+0xFB,0x7E,0xDF,0xB7,0xFF,0xC9,0xFF,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,
+0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEE, 0xFB,0xFE,0xBB,0xFF,0xFE,0xFF,0xBF,0xEF,
+0xFB,0xFE,0xFF,0xBF,0xEF,0xFE,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0x3F,0xCF,0xFF,0xE7,
+0xFE,0xFF,0xF5,0xFD,0x77,0x5D,0xD7,0x35, 0xDD,0x77,0xD7,0xF5,0xCD,0x7B,0x5D,0xD7,
+0xF5,0xDD,0x77,0xFE,0x27,0xFF,0xFF,0x8B, 0xE2,0xF8,0xBE,0x2F,0x8B,0xE2,0xF9,0xAF,
+0x8B,0xE2,0xF8,0xBE,0x2F,0x8B,0xE2,0xF9, 0xFE,0x1F,0xFF,0x5F,0xD7,0xF5,0xFD,0x7F,
+0x5F,0xD7,0xF5,0xFF,0x5F,0xD7,0xF5,0xFD, 0x7F,0x5F,0xD7,0xF5,0xFF,0xFA,0x3F,0xFE,
+0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,0xEB, 0xEC,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,
+0xEB,0xFF,0xFE,0x7F,0xFD,0x7F,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE6, 0xFF,0xFA,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,
+0xF7,0xFC,0xFF,0xDF,0xF7,0xFD,0xFF,0x7F, 0xDF,0xF7,0xFD,0xFF,0xF5,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0x02,0xFF,0xFE,0xBF,0xAB,0xEB,0xFA, 0xBE,0xBF,0x23,0xEB,0xDE,0x1F,0xAF,0xEA,
+0xFA,0xFE,0xAF,0xAF,0xEB,0xFD,0x97,0xFF, 0xF3,0xFC,0x7B,0x1F,0xCF,0xF1,0xFC,0x7F,
+0x1F,0xF1,0xFC,0x77,0x1F,0xCD,0xF1,0xFC, 0xFF,0x1F,0xFE,0x87,0xFF,0xAF,0xEF,0xFA,
+0xFE,0xFF,0xAF,0xEF,0xFA,0xFD,0xBF,0x2B, 0xFB,0x7E,0xBF,0xBF,0xEB,0xFB,0xFB,0xFB,
+0xDF,0xFF,0xFB,0xF7,0xFF,0xFF,0x7F,0xF7, 0xF7,0xFF,0xFD,0xDF,0xFE,0xFC,0xDF,0xFF,
+0xDF,0xFF,0xFD,0xFF,0xDA,0xBF,0xFF,0xBB, 0xEF,0xFB,0xF9,0xFF,0xBE,0xEF,0xFB,0xFB,
+0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xF7,0x7F,0xFD,0xD7,0xFF,0xFF,0x7F,
+0xFF,0xFF,0xFF,0xFE,0xF7,0xFF,0xFE,0xFF, 0xF7,0xFF,0xFF,0x7F,0xFF,0xFF,0xEC,0xFF,
+0xFF,0xFE,0xDF,0xBF,0xFF,0xFB,0xFE,0xFF, 0xBB,0x68,0xAE,0x1F,0xAE,0xFB,0xFB,0xFF,
+0xFF,0xBF,0xFF,0xD5,0xFF,0x7F,0xFF,0xFF, 0xF7,0xFE,0xFE,0xFF,0xBF,0xEF,0x9F,0xFD,
+0x7F,0xFF,0xCB,0xFF,0xFF,0xDF,0xFF,0xFF, 0xBB,0xF7,0xBF,0xFF,0xFF,0xFF,0xFF,0xDF,
+0xFF,0xBF,0xFB,0xFF,0xFF,0xFF,0xDE,0x3F, 0xFF,0xFF,0xFF,0xFF,0xFF,0xA7,0xFF,0xFF,
+0xFF,0xFF,0xEF,0xFF,0x7F,0xFB,0xFD,0xFB, 0x7F,0xFF,0xFF,0xFF,0xFF,0xCF,0xF3,0x7C,
+0xFF,0x7F,0x8D,0x7F,0xFF,0xFF,0xFF,0xFF, 0xFB,0xFF,0xF7,0xFB,0xFE,0xFD,0xFF,0xFF,
+0xFF,0xFF,0xF7,0xFD,0xFF,0x7F,0xFD,0x1F, 0xFD,0xFF,0xFF,0xFF,0xFF,0xBF,0xDF,0xFF,
+0xFF,0xFE,0x5C,0xFF,0x6D,0xFF,0x7F,0xAB, 0xE7,0xF1,0xFF,0xFD,0x9F,0xFF,0xFF,0xAD,
+0xEB,0x7A,0x3F,0x1F,0xFF,0xFF,0xFE,0xBF, 0xAF,0xF3,0xDE,0xF5,0xFF,0x8F,0xFB,0xDF,
+0xE6,0x7F,0xFF,0xDF,0xF3,0xFD,0xFF,0x7E, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0xF7,0xF3,
+0x7F,0xDF,0xF7,0xEF,0xFF,0xF6,0x3F,0x9F, 0xDF,0xFF,0xFF,0xEE,0xFF,0xFF,0xEF,0xFB,
+0xFF,0xFF,0xF9,0xFB,0xFE,0x4F,0xBF,0xEF, 0xBB,0xFF,0x69,0xAF,0xAF,0xFC,0xFF,0x3F,
+0xDD,0xFF,0xFC,0xBF,0x8F,0xFF,0xFD,0xF3, 0xBF,0xED,0x9E,0xFC,0xBF,0x6F,0xF5,0xD3,
+0xDF,0xFF,0xDB,0xD6,0xF5,0xEF,0xFD,0xFE, 0xFF,0xB9,0xFF,0x1F,0xD2,0xA9,0xAF,0xFF,
+0xDB,0xF7,0xBF,0xEF,0x46,0xFF,0xFF,0xAD, 0xEB,0x7A,0xDF,0xEF,0xF7,0xFF,0x7F,0xF7,
+0x9F,0xED,0xFF,0x7F,0xFF,0xAD,0xEB,0x7F, 0xF5,0x6F,0xFF,0xFD,0xFB,0xD6,0xF4,0xF7,
+0xFB,0xF9,0x7E,0x7F,0xFF,0x5F,0xC2,0xFE, 0xBF,0xFD,0xFB,0x33,0xDF,0xF9,0x5B,0xFF,
+0xFF,0xDD,0x67,0x7D,0xCF,0xEF,0xDB,0xEC, 0xFF,0x77,0xDD,0xF7,0xFD,0xFF,0xFF,0xDE,
+0xA7,0xBF,0xD4,0x9F,0xFF,0xFF,0xBF,0xEF, 0xFE,0xFF,0xDF,0xEF,0xBB,0xFF,0xFF,0xEF,
+0xEB,0xFA,0xFF,0xEF,0xBD,0xFB,0xFF,0xE2, 0x7F,0xFF,0xDF,0xDF,0xF7,0xFD,0xBF,0xBB,
+0x73,0xF7,0xFD,0x7F,0xDF,0xDE,0xF7,0xBF, 0xEA,0xDB,0xF6,0xFF,0xD6,0xFF,0xFF,0x66,
+0xFF,0xBE,0xFF,0xBF,0x6B,0xD9,0xF6,0xDF, 0xFF,0xFB,0x7E,0x7F,0xB7,0x7E,0xFF,0xFE,
+0xFF,0xCD,0xFF,0xFE,0x7F,0xFF,0xFC,0xFD, 0x3F,0xFB,0xFB,0xF7,0xFF,0xFF,0xFB,0xF6,
+0x7D,0xFE,0x7F,0xFF,0xFC,0xFF,0xB9,0xFF, 0xF9,0xFA,0xFE,0xBF,0xAF,0x5B,0xD6,0xED,
+0xAD,0x7B,0xF6,0xF9,0xBF,0xEF,0xF8,0xFA, 0xFE,0xBF,0xFE,0xE6,0xFF,0xFF,0xF7,0xFD,
+0xFF,0x7F,0xBF,0xEF,0xF3,0xFF,0xFF,0x6F, 0xF7,0xFE,0xFF,0xFF,0xF7,0xFD,0xFE,0xF7,
+0xEF,0xFF,0xFB,0xEF,0xFB,0x7E,0xDE,0xFE, 0xFF,0xBF,0xFF,0xFE,0xFF,0xFF,0xFB,0xFF,
+0xFF,0xEF,0xFB,0x6F,0xFC,0x1F,0xFE,0xE7, 0xFF,0xFF,0xFF,0xEF,0xFF,0xD3,0xB4,0xBB,
+0xFF,0xFF,0xFD,0xBF,0x6F,0xE3,0xFE,0xFF, 0xBF,0xFC,0xBF,0xF7,0xCF,0xF7,0xFD,0xFF,
+0x2F,0xDF,0xAB,0xEA,0xFF,0xDF,0xE7,0xEA, 0x9A,0xAF,0xEF,0xFB,0xFE,0xFF,0xF5,0x3F,
+0xFD,0x7E,0xFF,0xD7,0xF5,0xFB,0xFF,0xFD, 0xF7,0xFF,0x7F,0xFE,0xF7,0xFD,0xFF,0xD7,
+0xFF,0xD7,0x7F,0xEE,0x7F,0xFA,0x79,0xFE, 0x2F,0x8B,0xE6,0xF9,0xFE,0x3F,0x9E,0xF9,
+0xBE,0x2F,0x0B,0xE7,0xF9,0xFE,0x2F,0x9F, 0xFD,0xFF,0xFE,0x7D,0x7F,0x5F,0xD7,0xFF,
+0xFF,0x7F,0xFF,0xFD,0xFF,0x7F,0x5F,0x97, 0xFF,0xFD,0x7F,0x5F,0xFF,0xE3,0xFF,0xFF,
+0xFA,0xFE,0xBF,0xAF,0xFB,0xFB,0xFF,0xFF, 0xCF,0xEB,0xFE,0xBF,0xAF,0xFF,0xFA,0xFE,
+0xBF,0xFF,0x87,0xFF,0xFF,0xF5,0xFF,0xFF, 0xFF,0xFF,0xFD,0xFF,0x7F,0xFF,0xFF,0xFF,
+0xFB,0xFF,0xFF,0xF5,0xFF,0xFF,0xFE,0x0F, 0xFF,0xFD,0xEB,0xFF,0xFF,0xF7,0xFF,0xEF,
+0x7B,0xDF,0xFE,0xFF,0xFF,0xDF,0xF7,0xFD, 0xEB,0x7F,0xDF,0xFF,0x5F,0xFF,0xFF,0xFF,
+0xFF,0xFD,0xBF,0xFF,0x7E,0xFA,0xBF,0xC7, 0xDB,0xF7,0xBD,0x3F,0xFB,0xFF,0xF6,0xFF,
+0xFA,0xAF,0xFF,0xEB,0xFA,0xFE,0x3F,0x2F, 0xEA,0xFA,0x3E,0xAD,0xC9,0xBA,0xF6,0xAD,
+0xAF,0xEB,0xFA,0xF6,0xBF,0xFE,0x7F,0xFF, 0xFF,0xFD,0xFF,0xF1,0x7F,0x3F,0xCF,0xF1,
+0xEF,0xFF,0x7F,0xFF,0xBC,0xDF,0xDF,0xF7, 0xDD,0xFF,0xE0,0x7F,0xFF,0xFF,0xFE,0xFF,
+0xFA,0xEC,0xBB,0x7F,0x5F,0xFF,0xFB,0xEC, 0xFF,0xEF,0xB7,0xFF,0xF7,0xFF,0xFF,0xB5,
+0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xEE,0xDF, 0x5F,0xDF,0xDE,0xFF,0xAE,0xE7,0x77,0xFF,
+0xFF,0xDF,0xF7,0xFF,0xE3,0xFF,0xFA,0xBB, 0xFE,0xFF,0xAF,0xFD,0xFB,0xFE,0xBF,0xAB,
+0xF9,0xFE,0xFF,0xBF,0x7F,0xBF,0xFE,0xBD, 0xFE,0xD7,0xFF,0x9F,0xFD,0xFF,0xBE,0xEF,
+0xFF,0xEE,0xFD,0xBB,0x5B,0xEF,0xFF,0x7F, 0xEF,0xFF,0xEF,0xFF,0x7F,0xFF,0x4F,0xFF,
+0xEF,0xFB,0xBC,0xFC,0xFF,0xFF,0xFF,0xFE, 0xFE,0xFD,0xFA,0xFE,0xFB,0xFF,0xFD,0xF3,
+0xFB,0xFF,0xF8,0x5F,0xFF,0xFF,0xD7,0xF5, 0xFD,0xDF,0xEF,0xFF,0xF3,0xDC,0x5F,0xCE,
+0xF5,0xBD,0xFF,0xFF,0xD7,0xFF,0xFF,0xF9, 0x3F,0xFF,0xDF,0xF7,0xFF,0xFE,0xFF,0xFD,
+0xFF,0xFB,0xFF,0xF7,0xB9,0x7D,0xFE,0xDF, 0xFF,0xFF,0xFF,0xFF,0xF9,0x7F,0xFF,0xFE,
+0xFF,0xFF,0x7F,0xFF,0xFE,0xFF,0xFF,0xF7, 0xF6,0xFF,0xBF,0xF1,0xF8,0xFF,0xFF,0xFF,
+0xFF,0xE0,0xFF,0xFF,0xFF,0xFF,0xF9,0xFF, 0xFF,0xFF,0xFF,0xFF,0xEF,0xEF,0xFF,0xFF,
+0x9B,0xFB,0x7F,0xFF,0xFF,0xFF,0xC1,0xFF, 0xDF,0xFF,0x3F,0x5F,0xD7,0xBF,0xEF,0xBB,
+0xDE,0xEE,0xFF,0x7F,0xDF,0xFF,0xFE,0xF5, 0x7F,0xDF,0xFF,0x99,0xFF,0xFF,0xFA,0xFF,
+0xBF,0xFD,0xEB,0x7A,0xFF,0xB7,0xFE,0xFE, 0xFF,0xFF,0xEF,0xFF,0xFF,0xFD,0xBF,0xFF,
+0x97,0xFF,0xFD,0xF7,0xFF,0x7F,0xF7,0xFF, 0xFF,0xFD,0x5F,0xFE,0xF3,0xF9,0xDF,0xDF,
+0xFF,0xFF,0xFC,0xFF,0xFF,0x83,0xFF,0xFF, 0xFE,0xFF,0x9E,0xEC,0xFB,0xEE,0xFF,0x9F,
+0xBF,0xEF,0xFF,0xFE,0xED,0x7B,0xFF,0xFF, 0xFF,0xF1,0x5A,0xFF,0xFF,0xFD,0xFF,0x7C,
+0x69,0x3B,0xDF,0xFF,0x7F,0x1F,0xDF,0xFF, 0xFD,0xBA,0xFF,0xFF,0xFB,0xFF,0x5B,0xBD,
+0xFF,0xFF,0xFF,0xFF,0xD7,0xB6,0xED,0xE9, 0xFF,0xD6,0xBD,0x6F,0x5F,0xFB,0xFF,0xEF,
+0xFF,0x5F,0xFE,0xF6,0x6F,0xFF,0xFF,0xFF, 0xFF,0xF7,0xEB,0x7A,0xDF,0xFF,0x9F,0x7F,
+0x7F,0xFF,0xB7,0xFF,0xFF,0xFE,0xDF,0xFF, 0x6C,0xFF,0xFB,0xFF,0xBB,0x6F,0xEB,0xFE,
+0xCC,0xF7,0xA5,0xFA,0x5C,0xF5,0x75,0xBB, 0xB7,0xDF,0xFE,0x6F,0x5F,0xC5,0xBF,0xFD,
+0x7B,0xFE,0xFF,0x95,0xE7,0x29,0xCF,0x4F, 0xF5,0x91,0xEE,0x6B,0xDF,0xEF,0xFD,0x54,
+0xF5,0xBD,0xB1,0xFF,0xEF,0xEE,0xFB,0xBE, 0xBF,0xAF,0xFE,0xDE,0xBD,0x6F,0xDA,0xF2,
+0xFF,0xAF,0xBE,0xFF,0xFF,0xFD,0x7E,0xA7, 0xFF,0xF7,0xFF,0xBF,0xEF,0x7B,0xF6,0xFD,
+0xBD,0x4A,0xF2,0x85,0x85,0xBF,0x5B,0xFE, 0xB5,0xFD,0xFA,0xFF,0x4F,0xFF,0xFE,0xDF,
+0xFF,0xED,0xFF,0xBF,0xFF,0xBF,0x7F,0xFE, 0xFF,0xB7,0x6D,0xFF,0xF7,0xBF,0xBF,0xEF,
+0xFD,0x1F,0xFF,0xFE,0x7D,0xFF,0x67,0xFF, 0xFF,0xFF,0x3F,0x7F,0xFE,0xBF,0xFF,0xE7,
+0xDF,0xE7,0xFF,0xEF,0x6B,0xFC,0x1F,0xFF, 0xBF,0xEF,0xFB,0xFE,0xDE,0xBF,0xAF,0xFA,
+0xFF,0xB6,0xEF,0xF9,0xFE,0xFF,0x8F,0xEF, 0xDB,0xEF,0xAB,0x6F,0xFB,0xFE,0xFF,0xFF,
+0xEF,0xFD,0xFF,0x7F,0xFF,0xFF,0xDE,0xFF, 0xFF,0xEF,0xFF,0xFF,0xFF,0x3F,0xFF,0x6C,
+0xFF,0xBF,0xFB,0xFF,0xFE,0xFF,0xFB,0xFE, 0xDF,0xFF,0xFF,0xEF,0xFF,0xFF,0xBF,0xFF,
+0xFF,0xFE,0xFB,0xFF,0xD5,0x7F,0xFF,0xFF, 0xEF,0xFB,0xFF,0xFF,0xBF,0xEF,0x43,0xB5,
+0xFD,0x6F,0xCF,0xD6,0xBE,0x3F,0x7F,0xDB, 0xFE,0xC3,0xFF,0xFD,0xFF,0xAF,0xEB,0xFB,
+0xFC,0xFF,0x3E,0xEF,0xE8,0xFA,0xBD,0xCD, 0xAA,0xFE,0xFE,0x7D,0xCF,0xFF,0xB7,0xFF,
+0xF7,0xFF,0xFF,0xFF,0xFD,0xFF,0x75,0xCD, 0x52,0xD7,0xFD,0xFB,0xF7,0xDD,0xFB,0xEF,
+0xEB,0xFF,0xFF,0x4F,0xFF,0xBF,0x9F,0xE7, 0xF9,0xFC,0x7F,0x8B,0xC3,0xF9,0xAF,0x8F,
+0xE7,0xE9,0xBE,0x7F,0x9F,0xE6,0xF9,0xFC, 0x5F,0xFF,0xFF,0xF7,0xFD,0xFF,0x7A,0x5F,
+0xD7,0xED,0xFF,0xFF,0xD7,0xFF,0xDD,0x7F, 0xE7,0xFF,0xFC,0xFF,0xFC,0x3F,0xFF,0xFF,
+0xFF,0xFB,0xFF,0xFE,0xBF,0xAF,0xFF,0xFD, 0xFF,0xEF,0xFF,0xEB,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xF7,0x7F,0xFF,0x7F,0xDF,0xFF,0xFD, 0xFD,0x7F,0xFE,0xF7,0xFD,0x7F,0xDF,0xFF,
+0xFD,0xFF,0xFF,0xDF,0xFB,0xFF,0xEE,0xFF, 0xFB,0xFF,0xF7,0xFD,0xFF,0x7A,0xDF,0xF5,
+0xFD,0xFA,0xDF,0xF7,0xFC,0xFF,0x7F,0xDF, 0xBF,0xED,0xFF,0xC9,0xFF,0xDF,0xFF,0xBF,
+0x2F,0xFB,0xFF,0xBC,0xAD,0xFF,0xF7,0xFF, 0xFF,0xEF,0xD3,0xFF,0x7D,0xBF,0x6F,0xFF,
+0xFA,0xFF,0xFE,0xBF,0xAE,0xEA,0xFA,0xBE, 0xAD,0xA5,0xEB,0xCE,0xBF,0xA7,0xEB,0x5A,
+0xDE,0xBD,0xAF,0x6B,0xFD,0x57,0xFF,0xFF, 0xF4,0x7F,0x1F,0x7F,0xFD,0xFF,0x7F,0x36,
+0xF0,0xDF,0x79,0xFF,0xFF,0xFF,0xF7,0xFD, 0xBF,0xFF,0x87,0xFF,0xFB,0xF3,0xFC,0xFF,
+0xFF,0xFF,0xFF,0x7E,0xFF,0xBF,0xDF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xBF,0xF8,0x9F,
+0xFF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFD, 0xF7,0xFC,0xBD,0xFF,0xFE,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFB,0xF9,0xBF,0xFF,0xFF,0xEB, 0xE2,0xFE,0xFF,0xBF,0xEF,0xA9,0xBA,0x2F,
+0xEB,0xF9,0xFE,0x77,0xDF,0xF7,0xFF,0xFF, 0xF9,0x7F,0xFF,0xFF,0x7F,0xEF,0xD7,0xFF,
+0xFD,0xFF,0xFB,0xF5,0xFF,0xBF,0x6F,0xDF, 0xFF,0xFF,0xFD,0xFF,0xFF,0xF0,0xFF,0xFF,
+0xFF,0x3F,0xCF,0xFF,0xBA,0xEE,0x9B,0xBF, 0xEE,0xD7,0xFE,0xCD,0xEF,0xFF,0xDF,0xBF,
+0xFF,0xFF,0xC5,0xFF,0xFF,0xFD,0x7F,0x4F, 0xFD,0xF6,0xD9,0xFF,0x4F,0xD6,0xFD,0xBF,
+0x6E,0xFF,0xFF,0xF4,0x7F,0xFF,0x7F,0x8B, 0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xF9,0xFE,
+0x37,0xFF,0xD9,0xFB,0xF5,0xAF,0xFD,0xFF, 0xFF,0xFB,0xFF,0xFF,0x07,0xFF,0xFF,0xFF,
+0xFB,0xF7,0xFF,0xFD,0xFF,0x7C,0xFA,0x7E, 0x4F,0xFC,0xDF,0x1D,0xC7,0xFF,0xFF,0xFF,
+0xFF,0xAE,0xFF,0xFF,0xFF,0xFF,0xFD,0xFB, 0xFF,0xFF,0xFE,0xFE,0xFC,0xFF,0x7F,0x7F,
+0xBF,0xEF,0xFE,0xFF,0xFF,0xFF,0x5F,0xFD, 0xFF,0xFF,0xFF,0xFD,0x6F,0x5A,0xD7,0x7B,
+0xBE,0x5F,0xFE,0x39,0xFF,0xF7,0xFF,0xF7, 0xFD,0xFE,0xAA,0x1F,0xFF,0xFF,0xFF,0xFF,
+0xFE,0xFE,0xAB,0xAF,0xFD,0xFE,0xBF,0xFF, 0xF7,0xFF,0x7F,0xFE,0x8F,0xE3,0xFB,0xEE,
+0x7F,0xFF,0xFF,0xFF,0xFF,0xEB,0xFB,0xFF, 0xFD,0xBF,0xEF,0xDF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFB,0xE4,0x3F,0xFF,0xDF, 0xFF,0xFF,0xFF,0xFF,0xF3,0xEF,0xBB,0xFB,
+0xBF,0xEF,0xBB,0xFF,0xD7,0xBF,0xFF,0xFF, 0xFF,0x29,0xAF,0xF7,0xFF,0xFF,0xFB,0xFF,
+0xFB,0xE6,0xFF,0x0F,0xFB,0x3F,0xDF,0x0F, 0xFF,0xAF,0xFF,0xFF,0xFF,0xF5,0xC3,0xDF,
+0x5F,0xFF,0xFF,0xFF,0xFE,0x6B,0xCA,0xBE, 0xBC,0xFF,0x9F,0xF2,0xBF,0xFF,0xFE,0xFA,
+0xFF,0xFF,0xEF,0x16,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFC,0xDF,0x97,0xFD,0x79,0xFF,0x37,
+0xE7,0x7F,0xFF,0xFF,0xB5,0xFF,0xFF,0xF6, 0x2F,0xFF,0xFD,0xFB,0xFE,0xFF,0xFF,0xFD,
+0x5F,0x57,0x5F,0xFF,0xDB,0x52,0xDF,0xFF, 0xFD,0xBF,0xFF,0xFF,0xFC,0xDB,0xFF,0x7B,
+0xB5,0xFD,0x7F,0xFF,0x71,0x9C,0x6E,0xFF, 0xF6,0x35,0xA5,0x9B,0xFF,0xFF,0xFD,0xFF,
+0xFF,0xDB,0x9E,0x7F,0xFE,0xEF,0xFB,0xFF, 0xFF,0xBD,0xEF,0xFF,0xDE,0xB7,0xF9,0x4B,
+0xFF,0xF5,0xEF,0xFF,0xFF,0xFF,0xE8,0x7E, 0xFF,0xEA,0xDF,0xF7,0xFF,0xFD,0x69,0x5B,
+0xFC,0x9F,0xEF,0x78,0xD6,0xFF,0xEB,0xEF, 0xFF,0xFF,0xFF,0xE8,0xFF,0xFF,0xED,0xFF,
+0xFF,0xFF,0xFF,0xE3,0xF9,0xF6,0xBF,0xFF, 0xFF,0xFE,0xDF,0xFF,0x7F,0xFF,0xFF,0xFF,
+0xD1,0xFF,0xFF,0xE7,0xFF,0xFF,0xFF,0xFF, 0xE7,0xF9,0xFF,0xBF,0x7F,0xD9,0xFF,0xFD,
+0xFE,0x7F,0xFF,0xFE,0xFF,0xF9,0xFF,0xFB, 0xD6,0xDF,0xBF,0xEF,0x5B,0xD6,0xFF,0xBF,
+0xFB,0xF6,0xFF,0xBF,0xEF,0xF8,0xF6,0xDD, 0xBE,0xFE,0x16,0xFF,0xBF,0xEF,0xFF,0xFE,
+0xFF,0xBF,0xEF,0xFF,0xFF,0xFF,0x6F,0xFB, 0xFF,0xFF,0xFF,0x6F,0xF3,0xFF,0xF7,0xEF,
+0xFB,0xFF,0xBF,0xFF,0xEF,0xFE,0xFF,0xBF, 0xFF,0xFF,0xFF,0xBE,0xBF,0xFF,0xEF,0xFF,
+0x7F,0xEF,0xFF,0xFD,0x17,0xFB,0x7B,0xFF, 0xFF,0xFD,0x7F,0xDB,0xF6,0xF4,0x7F,0xFA,
+0xFE,0xF5,0xBF,0xEB,0xE3,0xF7,0xFF,0xFF, 0xE9,0xBF,0xFF,0xAF,0xF7,0xFD,0xF3,0x7E,
+0x8F,0xA3,0xEA,0xFF,0xCB,0xF3,0xEE,0xFF, 0xBF,0xEF,0xF7,0xF9,0xFF,0xFE,0x7F,0xFF,
+0xFF,0xFF,0xFF,0xF5,0xFB,0xF6,0xFF,0xF5, 0x2F,0xFE,0xFB,0xD7,0xBF,0xFF,0xBE,0xDF,
+0x9F,0xFF,0xF0,0xFF,0xFF,0xF9,0xFE,0x7F, 0x8F,0xA3,0xF8,0xFE,0x6F,0x9F,0xF9,0xF6,
+0x2F,0x9F,0xE7,0xF9,0xFE,0x2F,0x9F,0xE1, 0xFF,0xFF,0xFF,0x7F,0xDF,0xF7,0xF5,0xFD,
+0x7F,0x7F,0xF5,0xFF,0x9F,0x5F,0xFB,0xFE, 0xFF,0x7F,0xFF,0xFF,0xCB,0xFF,0xFF,0xFB,
+0xFE,0xFF,0xBF,0xAF,0xFB,0xFE,0xFF,0xDF, 0xFE,0xFE,0xBF,0xF7,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xC7,0xFF,0xFF,0xFD,0xFF,0x7F,0xDD, 0xF7,0xFD,0xFF,0xFF,0xD7,0xFF,0xFD,0x7F,
+0xFF,0xFB,0xFD,0xFF,0xFF,0xFE,0xEF,0x7F, 0xFD,0xEF,0xFB,0xFE,0xFB,0xFD,0xFF,0x7F,
+0xDF,0xFD,0xFF,0x7A,0xDF,0xF7,0xFD,0xFF, 0xFF,0xFF,0xFF,0x1F,0xFF,0xFF,0xD3,0xF7,
+0xFF,0xFF,0x6F,0xDB,0xFF,0xFF,0xEF,0xCB, 0xF4,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,
+0x29,0xFF,0xE8,0xDA,0x76,0x9F,0xAF,0x6A, 0xDA,0xFE,0x35,0xEB,0xDA,0xD6,0xBF,0xAB,
+0xEB,0x7A,0xDE,0xBF,0xD7,0x7F,0xFF,0xFE, 0xFF,0xBF,0xEF,0xFD,0xDF,0x77,0xBF,0xFD,
+0x37,0xEF,0xFF,0xEF,0xFF,0x3F,0xFF,0xFF, 0xFF,0xFE,0x7F,0xFF,0xFF,0xFF,0xF7,0x7E,
+0xDF,0xFF,0xFF,0xFF,0xFA,0xB7,0x7F,0xFF, 0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0x89,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0x9F,0xFB,0xFF,0xFF,0xFF,0xE7,0xFF,
+0xFF,0xFF,0xFF,0xAA,0xFF,0xAB,0xFB,0xFA, 0xEF,0xBF,0xFF,0xDF,0xFA,0x7B,0xB9,0xFE,
+0xFE,0xFF,0xFD,0xFF,0xF7,0xFE,0x3F,0xFF, 0xB7,0xFF,0xF7,0xEE,0xFF,0x7F,0xEF,0xFF,
+0xFF,0x7F,0xFF,0x1F,0xFB,0xFF,0xBF,0xFB, 0xFE,0xFF,0xBD,0xFF,0xFF,0x2F,0xFF,0xBF,
+0xFF,0x7F,0xDF,0xFA,0xFF,0xFF,0xFC,0xEE, 0xF5,0xF3,0xBE,0xFB,0x0F,0xEF,0xF3,0xBE,
+0xEF,0xFC,0x5F,0xFF,0x5A,0xFF,0xF7,0xDF, 0xFF,0xFF,0xFE,0xD5,0xFC,0x5F,0xFB,0xF2,
+0xFF,0xFF,0x2F,0xBB,0xF3,0xFF,0xFF,0xBF, 0xFF,0xEF,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF,
+0xBF,0xFF,0xFF,0xFD,0x7B,0xFF,0xDF,0xB9, 0xFF,0xFB,0xFF,0xD8,0x7F,0xFF,0xFF,0xFF,
+0xFB,0xFF,0xFC,0x7F,0x1F,0xBF,0xE0,0xDF, 0xF7,0xEF,0xFF,0xFD,0x7F,0xFE,0xDF,0xFF,
+0xE0,0xFF,0xFF,0xFD,0xEF,0xFB,0xFF,0xFE, 0xF7,0xDF,0xFF,0xEB,0x5F,0xFF,0xF7,0xFF,
+0xFF,0xFF,0xFF,0xBF,0xFF,0xFD,0xFF,0xFD, 0xFF,0xFF,0xFF,0xF7,0xFD,0xFF,0x3B,0xDC,
+0xFD,0x6D,0x7B,0x5F,0x57,0xF5,0xFD,0x7F, 0x5F,0xFF,0xB1,0xFF,0xEB,0xFF,0xFF,0xFF,
+0xFB,0xFB,0xFE,0xFF,0xBF,0xFB,0xBE,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFF,0xAF,0xFE,0xF7,
+0xDF,0xDF,0xFF,0xFF,0xFF,0x7F,0xCF,0xF3, 0xF8,0xFF,0xD7,0xFB,0xFF,0x5F,0xBF,0xF7,
+0xFB,0xFF,0x7F,0xFE,0x23,0xFF,0xFF,0xFE, 0x7F,0xF3,0xFF,0xFB,0xFE,0xFF,0xFF,0xF3,
+0xFF,0xFF,0xF5,0xF9,0xFF,0x3F,0xFF,0xFF, 0xF0,0x9A,0xFF,0xBE,0x7F,0xFF,0xFC,0xF9,
+0xFF,0xFD,0xAF,0xEB,0xFE,0xBF,0xFF,0xCF, 0xF3,0xFE,0x7F,0xFF,0xFF,0x5B,0xBD,0xFF,
+0xBC,0xEB,0xFF,0xD7,0xD4,0xAF,0xAF,0xFD, 0xFF,0xCF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7,
+0xFD,0xFE,0xFF,0x6F,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFD,0x7F,0x5E,0xFD,0xBF,0xDB,0xF6,
+0xFD,0xBF,0x6F,0xFB,0xEE,0xFD,0xFF,0x7A, 0xFF,0xFA,0xFB,0xFF,0x3F,0xFB,0xB7,0x5F,
+0xD6,0xF7,0x1F,0x71,0xDC,0x77,0x1D,0xC7, 0x31,0xDC,0x77,0xDF,0xF9,0xBF,0xF5,0x5B,
+0xF4,0xD7,0x9D,0xAE,0xFF,0xBF,0xFD,0xBF, 0xDB,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6,0xFE,
+0x3D,0x81,0xFF,0xEB,0xFE,0xFE,0xFE,0xFF, 0xEB,0x7A,0xDF,0x7D,0x77,0x7D,0xF5,0x79,
+0xDF,0x57,0xDD,0xF5,0x7D,0x7E,0xE6,0xFF, 0xD6,0x3F,0xBF,0x7F,0xFF,0xD4,0xF5,0x3F,
+0xBF,0xFB,0xBE,0xEF,0xB3,0xEE,0xFB,0x9E, 0xEF,0xBB,0xFE,0x8B,0xFF,0xFE,0xDF,0xB7,
+0xED,0xFF,0xF7,0xFD,0xFE,0xFF,0xEF,0xBB, 0xEE,0xFF,0xBE,0xEF,0xBB,0xEE,0xEB,0xFC,
+0x1F,0xFF,0xFF,0xFD,0xFF,0xE7,0xFF,0xF7, 0xFD,0xFF,0xEF,0xFE,0xFF,0xBF,0xEF,0xFB,
+0xFE,0xFF,0xBF,0xEB,0xFA,0x1F,0xFF,0xB7, 0xEF,0x5B,0xFE,0xFF,0xAF,0xEB,0xDD,0xE7,
+0xDE,0x77,0x9D,0xE7,0x79,0xDE,0x77,0x9D, 0xBF,0xE6,0x6F,0xFF,0xFE,0xFF,0xBF,0xEF,
+0xFB,0xFE,0xFD,0xBF,0x6F,0xF6,0xFD,0xBF, 0x6F,0xDB,0xF6,0xFD,0xBF,0xFF,0x7E,0xFF,
+0xFF,0xFB,0xFE,0xFE,0xFF,0xEF,0xFB,0xFD, 0xEF,0x7E,0xF7,0xBD,0xEF,0x7B,0xDE,0xF7,
+0xBD,0xEF,0xFF,0xD5,0xFF,0xBF,0xFF,0xEF, 0xFE,0xFF,0xFC,0x3F,0x0F,0xE7,0xFE,0x7F,
+0x9F,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7,0xFE, 0xF3,0xFF,0xFE,0xDF,0xAD,0xDF,0x67,0xEE,
+0xFB,0xBF,0xEF,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFE,0xFF,0xBF,0xEF,0xFF,0x23,0xFF,0xFF,
+0xFF,0xFF,0x7F,0xFF,0xF3,0xBC,0xDB,0xFE, 0xFB,0xFF,0xFB,0xBE,0xF7,0xFB,0xFF,0x7F,
+0xDF,0xFF,0xCF,0xFB,0xFF,0x9F,0xE3,0xF9, 0xBE,0x3F,0x8F,0xE7,0x79,0xFF,0x9D,0xE7,
+0xF9,0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x5F, 0xFF,0xCF,0xF7,0xFF,0xFF,0xFF,0xDF,0xF7,
+0xFE,0x7F,0xE7,0xF9,0xFE,0x7F,0xFF,0xFF, 0xFB,0xFE,0xFF,0xFF,0xBF,0xFF,0xBF,0xBF,
+0xFF,0xFE,0xFF,0xBF,0xEF,0xFF,0xFD,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFD,0xFF,
+0xFF,0x3F,0xFF,0xBF,0xFF,0xF7,0xFF,0xFF, 0x7F,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xE8,0xEF,0xFF, 0x5F,0xF7,0xBF,0xF9,0xFE,0xDF,0xB7,0xFD,
+0xFF,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0xDD,0xFF,0xF2,0xFF,0xBF,0xFF,
+0xFF,0xBF,0xFF,0xFF,0x2F,0xF2,0xFF,0xBF, 0x2F,0x7B,0xD2,0xF7,0xBF,0x2F,0xFF,0xBB,
+0xFF,0xEE,0x8F,0xAF,0xEB,0xFA,0xFE,0x3F, 0xA7,0x69,0xCE,0x8F,0xA4,0xEA,0xFA,0xEE,
+0xB7,0xAE,0xEB,0xFD,0xC7,0xFF,0xF7,0xF7, 0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x3E,0xF3,
+0x74,0xFF,0x3F,0x4F,0xFF,0xE7,0xFF,0x3F, 0xFE,0xA7,0xFF,0xFF,0xDF,0xF7,0xB7,0xFF,
+0xF7,0xFF,0xBA,0xEF,0x37,0xEB,0xFB,0xFE, 0xBF,0xFB,0xFE,0xF3,0xFF,0xF9,0xDF,0xFF,
+0xBF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, 0xFD,0xDF,0xFF,0xFD,0xFF,0xFF,0xFB,0xFE,
+0xFD,0xFF,0xFB,0xBF,0xFE,0x3F,0xED,0xFF, 0xDF,0xBE,0x3D,0xA7,0xFB,0xFA,0x3F,0xE6,
+0xE1,0xFE,0xFE,0x3F,0xEF,0xE3,0xDF,0xF5, 0x7F,0xFE,0xFF,0x7E,0xFF,0xFF,0xFF,0xFF,
+0xEF,0x6F,0xF6,0xFF,0x7D,0xEF,0xD7,0xDE, 0xFF,0x7D,0xEF,0xFF,0xF2,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0x7B,0xDE,0xFB,0xE6,0xEE, 0xEF,0x37,0x6E,0xF3,0x7E,0xEB,0x37,0xEF,
+0xFF,0xC1,0xFF,0xFE,0xFF,0xF7,0xEF,0xFF, 0xFF,0xFF,0xBF,0x3F,0xD2,0xDF,0xBF,0x2F,
+0x7B,0xE2,0xFF,0xFE,0x3B,0xBD,0xDB,0xFF, 0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFE,
+0xFF,0xFB,0xFF,0xFF,0xBF,0xFF,0xFB,0xDF, 0xFF,0xBF,0xFF,0xB7,0xFF,0xFF,0xBF,0xEF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xFF, 0x7F,0xFF,0x1F,0xEF,0xF1,0xFD,0xFF,0xF6,
+0xAF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF, 0xFF,0xFF,0xFE,0x9F,0xFF,0xFF,0xFF,0x77,
+0xEF,0xF7,0xFB,0xFF,0xFE,0x5F,0xFF,0xFF, 0xBF,0xCF,0xFB,0xF7,0xDD,0xF7,0xF5,0xFF,
+0x5F,0xD5,0xF5,0xFD,0x7F,0x5F,0xD7,0xF5, 0xFF,0xFB,0x0F,0xFF,0xFF,0xA9,0xEA,0x7A,
+0xFF,0xAF,0x8F,0xFE,0xDF,0xAF,0xEF,0xFB, 0xFE,0xFF,0xBF,0xEF,0xFB,0xDF,0xE5,0x5F,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xBD,0x57,0xFF, 0xFF,0x6F,0x77,0xBF,0xF7,0xFB,0xFF,0x7F,
+0xBF,0xF7,0xFF,0xFC,0xBF,0xFF,0x9F,0xFF, 0xFF,0xEF,0xFF,0xFE,0xFF,0xFF,0xFF,0x1F,
+0xCF,0xFF,0xFC,0xFF,0xFF,0xFF,0xFF,0xFB, 0x65,0xAF,0xF3,0x7C,0xFF,0x3F,0xDF,0xFF,
+0xFD,0xE9,0xFE,0x7F,0xE7,0xFF,0xFE,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFD,0xE3,0xDF,0xFB,
+0xDB,0xF6,0xFD,0xEF,0x5B,0xFB,0xFF,0xDF, 0xFC,0xFF,0x3F,0xDF,0xF3,0xFD,0xFF,0x7F,
+0xDF,0xEF,0x66,0xFF,0xDF,0xAD,0xEB,0x7A, 0xDE,0xF7,0xF7,0xE7,0xD9,0xFD,0x9F,0x67,
+0xD9,0xF6,0x7D,0x9F,0xE7,0xDF,0xF5,0x47, 0xFD,0x65,0x5B,0xD6,0xF4,0xFE,0xFF,0xEF,
+0xFF,0x6D,0xF6,0xDD,0xB7,0x6D,0xDB,0x76, 0xDC,0xB7,0x7D,0xFA,0x9B,0xF6,0x6D,0x9D,
+0x67,0x59,0xDF,0xF7,0xDD,0xFF,0xEB,0xFE, 0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,0xE3,
+0xD1,0x9F,0xFF,0xBD,0xBF,0xEF,0xFE,0xF7, 0xBF,0xBF,0xF7,0xD7,0x7F,0xDD,0xF7,0x9D,
+0xDF,0x7F,0xDF,0xF7,0xFF,0xE0,0x7F,0xFD, 0xC1,0xDF,0xF7,0xFD,0xC7,0x7F,0x7F,0xFB,
+0xFF,0xBB,0xEC,0xFB,0x3E,0xFF,0xBF,0xEC, 0xFB,0xFF,0xD8,0x7F,0xBF,0x6C,0xFF,0xBE,
+0xFF,0xBF,0xED,0xFF,0xEF,0xFE,0xFB,0xBF, 0xEF,0xFB,0xFE,0xFF,0xBF,0xEE,0xFF,0xC5,
+0xFF,0xAF,0x6F,0xFF,0xFC,0xFD,0x3F,0xE7, 0xFF,0xFE,0xFF,0xEF,0xFB,0xFE,0xFF,0xBF,
+0xEF,0xFB,0xFE,0xBF,0x89,0xFE,0xFA,0xBA, 0xFE,0xBF,0xAF,0xFB,0xF6,0xF5,0xD9,0x7D,
+0x97,0x65,0xD9,0x74,0x5D,0x97,0x65,0xD3, 0xFE,0xD6,0xFF,0xBF,0xF7,0xFD,0xFF,0x7F,
+0xBF,0xCF,0xFB,0xFE,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFF,0xF6,0x8F,0xFB,
+0xFF,0xEF,0xFB,0x7E,0xDB,0xFE,0xFF,0xBE, 0xEF,0xEE,0xFB,0xBE,0xEF,0xBB,0xEE,0xFB,
+0xBE,0xFF,0xFF,0xDF,0xFF,0x43,0xFF,0xFF, 0xFB,0xEF,0x5F,0xB7,0xFE,0x7F,0xE7,0xF9,
+0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0xF9, 0xBF,0xFE,0xAF,0x77,0xFD,0xFF,0x2F,0xAF,
+0xA7,0xFE,0xFF,0xEF,0xFB,0xFE,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0xF1,0x7F,0xEF,0xDF,
+0xFF,0x97,0xF5,0xEF,0xFF,0xDF,0xFF,0xFF, 0xBF,0xFF,0xBF,0xFF,0xFF,0xFE,0xFF,0xFF,
+0xFF,0xE0,0xFF,0xFF,0xF9,0xFE,0x2F,0x8B, 0xE3,0xF8,0xBE,0x77,0x9F,0xF9,0xDA,0x77,
+0x9D,0xE7,0x79,0xDE,0x77,0x9F,0xDD,0xFF, 0xFD,0xFD,0x7F,0x5F,0xD7,0xFD,0xFF,0x7F,
+0xE7,0xFE,0x7F,0x97,0xE7,0xFB,0xFE,0xFF, 0xBF,0xEF,0xFF,0xAB,0xFF,0xEF,0xFA,0xFE,
+0xBF,0xAF,0xFF,0xFA,0xFF,0xFF,0xDF,0xFF, 0xFB,0xFF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF,
+0x67,0xFF,0xF7,0xF5,0xFF,0xFF,0xFF,0xDF, 0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF,0xBD, 0xEB,0xFF,0xFF,0xF7,0xAD,0xEB,0xFF,0xDF,
+0xFD,0xFF,0x3F,0xDF,0xF7,0xFD,0xFF,0x7F, 0xDF,0xFF,0x5F,0xFF,0xF7,0xFF,0xFF,0xFD,
+0xBF,0xFF,0xCB,0xF4,0xFF,0x7F,0xD3,0xF7, 0xFD,0x3F,0x7F,0xD3,0xF7,0xFF,0xFC,0x3F,
+0xFF,0xEA,0xFA,0xBE,0xAF,0xAB,0xEB,0xBA, 0xF4,0x95,0x6B,0x52,0xD4,0xAD,0x2F,0x4A,
+0xD2,0xF6,0xBF,0xD2,0x7F,0xF7,0x3F,0xFF, 0xFF,0xF3,0x7F,0xFF,0xFF,0xF7,0xFF,0xBA,
+0xDF,0xFB,0xFD,0xFF,0xBF,0xFF,0xFB,0xFF, 0xF8,0x7F,0xEA,0xFF,0xFE,0xFE,0xDF,0xFF,
+0xF7,0xFF,0x7F,0xBB,0xFF,0xFF,0xBF,0xDF, 0xFB,0xFF,0xFF,0xBF,0xFF,0xB1,0x7F,0xFF,
+0xFB,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xBF, 0xCF,0xFE,0xFF,0xFF,0xEF,0xFF,0xF7,0xFF,
+0xFF,0xFF,0xF1,0xFF,0x69,0xBE,0xFA,0xBF, 0xAF,0xE2,0xFF,0xFE,0xFD,0xAF,0xF3,0xFE,
+0xFF,0xBF,0xEF,0xFB,0xFC,0xFF,0xFF,0x07, 0xFD,0x95,0xDB,0xDF,0x7F,0xDF,0xAF,0xFF,
+0xF7,0xAF,0x36,0xFE,0xBF,0x65,0xEB,0xF6, 0xFE,0x9F,0x6F,0xFE,0x07,0xFF,0xCF,0xFF,
+0xF8,0xFE,0xFF,0xCF,0xFF,0xF6,0xFA,0xE7, 0xFB,0xFE,0xFF,0xBB,0xED,0xF9,0xFF,0xFF,
+0xFF,0x5F,0xFF,0xFF,0xFF,0x75,0xFF,0xEF, 0x7E,0xFD,0xE0,0xE8,0x5E,0xD3,0xE5,0xF9,
+0x3E,0x5F,0xD7,0xF7,0xFF,0xFA,0x2F,0xFB, 0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0x7F,
+0x7F,0xD7,0xF5,0x7D,0x5F,0x57,0xD5,0xF5, 0xEF,0xFF,0xF3,0x7F,0xFC,0x7F,0xFF,0xC7,
+0xF1,0xFF,0xFF,0x1F,0xCF,0xB0,0xFF,0x3F, 0xCF,0xF3,0xFC,0xFF,0x3F,0xCE,0xFF,0xE4,
+0xFF,0xDF,0x7F,0xFE,0xF7,0xBB,0xFF,0xFF, 0xDF,0xEF,0xEE,0xFF,0xBF,0xEF,0xFB,0xFE,
+0xBF,0xBF,0xEF,0xFF,0xD1,0xFF,0xFF,0xFF, 0xFD,0xFB,0xFF,0xFD,0xFF,0xFB,0x9F,0xE9,
+0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0xBF, 0xFF,0xB3,0xFF,0xFF,0xF7,0xFF,0xFF,0xAF,
+0xF7,0xFF,0xB6,0x3F,0xEB,0xFA,0xFE,0xBF, 0xAF,0xEB,0xFA,0xFE,0xBF,0xFE,0xA7,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xFF,0xFF, 0xFE,0x9F,0xF7,0xF9,0xFF,0x7F,0x9F,0xE7,
+0xFF,0xFF,0xFE,0xAF,0x6F,0xFF,0xFF,0xFF, 0x9F,0xFF,0xDF,0xFF,0x7D,0x5F,0xDD,0xFF,
+0xFB,0xBF,0xE7,0xBB,0xFF,0xFB,0xDF,0x6D, 0x5F,0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xEB,0xF7,0xFF,0xE7,0xEF,0xF7,0xFF,0xFF, 0x7F,0xFF,0xF7,0xFF,0xFC,0x8F,0xFF,0xEF,
+0xFD,0xFE,0xFF,0xBE,0xF4,0xF2,0x7D,0xD7, 0xCF,0xFF,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xCF,0x6B,0xFF,0xBF,0x3F,0xFB,0xF2, 0xFC,0x7F,0xEB,0xFF,0x9F,0xFA,0xFF,0xFF,
+0x3F,0xFF,0xF3,0xFF,0xFF,0xFD,0x70,0xF7, 0xFF,0xFF,0xBF,0xFF,0xFB,0xD7,0xFE,0xF5,
+0x77,0xFF,0x15,0xDD,0x77,0xFD,0xFF,0x7F, 0xDF,0xF7,0xFB,0xCD,0xBF,0xFF,0xFD,0xFF,
+0xFF,0xDF,0x37,0xCD,0xF9,0xEC,0xFE,0xEF, 0xBB,0xF4,0xFB,0x3F,0x4F,0xB3,0xFF,0xFD,
+0xCB,0xFF,0xE9,0x7E,0x54,0x9F,0xE5,0x4B, 0xB7,0xFF,0xDD,0x7D,0xC7,0x71,0xDD,0x77,
+0x5D,0xD7,0x75,0xCD,0x7F,0xD6,0xFF,0xD3, 0xF6,0xF9,0x3F,0x6D,0x95,0xAF,0x7F,0xFE,
+0xFF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFE,0xF6,0xC7,0xFF,0xAD,0x7B,0xCA,0xFF,
+0xBF,0xBF,0xEF,0xFD,0xE3,0xDF,0xB7,0xED, 0xFB,0x7E,0xDF,0x37,0xED,0xE3,0xFB,0xDF,
+0xFF,0x52,0x5C,0x15,0xFD,0xCF,0x7F,0xDF, 0xFE,0xEF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEC,
+0x7B,0xFE,0xFF,0xFE,0x3E,0x7F,0xDA,0xF7, 0xFD,0xFF,0x7F,0xFF,0xFF,0xFB,0xEF,0xBB,
+0x6F,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFF, 0xF7,0x7D,0xFF,0xD8,0xFF,0xFD,0xBF,0x7F,
+0xFB,0xFF,0xFF,0x9F,0xFB,0xFE,0x7F,0x9F, 0xE7,0xF9,0xFE,0x7F,0x9F,0xEA,0x7F,0xF6,
+0xBF,0xBD,0x6A,0x5A,0xF6,0xE5,0xBF,0x77, 0x5F,0x6D,0xDD,0x77,0x5D,0xD7,0x75,0xDD,
+0x77,0xFF,0xA5,0xBF,0xCF,0xFB,0xFF,0xFF, 0xBF,0xCF,0xFB,0xFD,0xFF,0xBF,0xF3,0xFE,
+0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFD,0xAB, 0xFF,0xBF,0xBF,0xFF,0xFB,0xFF,0x7F,0xEF,
+0xFF,0xBE,0xFB,0xEE,0xFB,0xBE,0xEF,0xBB, 0xEE,0xFB,0xBF,0xFF,0xB5,0xFF,0xD0,0xBC,
+0xFD,0x2F,0x4B,0xF7,0xFF,0xFF,0x9F,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x9F,
+0xFA,0x8F,0xFD,0xAB,0xFA,0xDA,0xBF,0xAF, 0xB3,0xFD,0xFF,0xBF,0xFB,0xFE,0xFF,0xBF,
+0xEF,0xFB,0xFE,0xF7,0xBF,0xFF,0x9F,0xFF, 0x77,0xF7,0xBD,0xFD,0x77,0xDF,0xFF,0x7E,
+0xDF,0xED,0xBB,0xFE,0xFF,0xBE,0xEF,0xFB, 0xFE,0xFF,0xFA,0x3F,0xFF,0xBE,0x6F,0x8F,
+0xE6,0xF9,0xFE,0x7F,0x9F,0xC7,0xFE,0x7F, 0x9F,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7,0xFB,
+0x7F,0xFF,0x7F,0xCF,0xFF,0xFD,0xFF,0xFF, 0xDF,0xFB,0xAF,0xBF,0xEF,0xFF,0xFE,0xFF,
+0x9F,0xEF,0xFB,0xFF,0xFC,0xFF,0xFB,0xFE, 0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xF7,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xF5,0xFF,0xFF,0xFF,0x3F,0xDF,0xF7,
+0xFF,0xFF,0x7F,0xEF,0xFE,0xFF,0xBF,0xFF, 0xFB,0xFF,0xFF,0xBF,0xEF,0xFF,0xB3,0x7F,
+0xFF,0x7B,0x5E,0xF7,0xFD,0xFF,0x7B,0x7F, 0xF7,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F,
+0xDF,0xF7,0xFF,0x17,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xDD,0xF6,0xFC,0xBF,0xCB,0xF2,
+0xBC,0xBF,0x2F,0xCB,0xF2,0xFC,0xBF,0xFE, 0x8F,0xFF,0xFA,0x7E,0xBF,0xA7,0xEB,0xDA,
+0xFC,0xBF,0xAF,0x7A,0xFE,0xBF,0xAF,0xEA, 0xFA,0xFE,0xBF,0xAF,0xF4,0xDF,0xFE,0xFF,
+0xF3,0x3C,0x7F,0x3E,0xFF,0xCF,0xF8,0xBF, 0x8F,0xE3,0xF8,0xFE,0x3F,0x8F,0xE7,0xE8,
+0xFF,0xFC,0x9F,0xFF,0xFF,0xCF,0xEB,0xB3, 0xE7,0xFB,0x7B,0xF3,0xFE,0xFF,0xCF,0xDB,
+0xFB,0xFB,0xBF,0x6F,0x6F,0xDF,0xEC,0x7F, 0xFF,0xFF,0xF7,0xFD,0xFD,0xFF,0xFF,0xFF,
+0xFF,0xB2,0xBF,0xFF,0xDE,0xFD,0xBD,0xEF, 0xFB,0xF6,0xDF,0xEA,0xE7,0xDB,0xFE,0xBB,
+0xFF,0xEB,0xFB,0xBF,0x9F,0x8F,0xE8,0xFE, 0x3F,0x8F,0xA3,0xF8,0xFE,0x3F,0x8F,0xFF,
+0xF8,0x7E,0xFD,0xFD,0x7F,0xFF,0xFB,0xCD, 0xFF,0xFD,0xFF,0x5F,0xEF,0xFD,0xFF,0xFF,
+0xDF,0xF7,0xFD,0xFF,0xBE,0x90,0xFF,0xFF, 0xEE,0xFF,0x3F,0xBF,0xF3,0xBB,0xFE,0xB7,
+0xAB,0xFA,0xFE,0xAF,0xAD,0xEA,0xFA,0xDE, 0xAB,0xFF,0x63,0xFF,0xFE,0xF2,0xFF,0xB3,
+0xFF,0xDF,0xEE,0x7D,0xFF,0x03,0xF1,0xF4, 0x3F,0x1F,0xC3,0xF1,0xEC,0x7F,0xFE,0x6F,
+0xFF,0xFB,0xFB,0xFF,0x9F,0xFF,0xBF,0xFF, 0x7B,0x5F,0xFD,0xFF,0xDF,0xF7,0xFD,0xFD,
+0x7F,0x7F,0xDF,0xFE,0xCF,0xFB,0xFF,0xFF, 0xAF,0xFB,0xFF,0x1F,0xEF,0xA5,0xFD,0xBF,
+0xDF,0xFB,0x7D,0xFF,0xBF,0xDF,0xFB,0xFF, 0xFD,0x3B,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,
+0xAF,0xF3,0xFF,0xFB,0x7F,0xBF,0xD7,0xFB, 0xBF,0x7F,0xBB,0xF7,0xFF,0xF8,0x7F,0xFF,
+0xFA,0x5F,0xD7,0xFF,0xDF,0x7F,0xEF,0xFF, 0xFF,0x7F,0xDB,0xF7,0xFD,0xFF,0x7F,0xDF,
+0xB7,0xFB,0xEC,0xFF,0xFF,0xF7,0xBF,0xEF, 0xFD,0xFC,0xFB,0xFF,0xEF,0xF0,0xFE,0x3F,
+0x8F,0xE3,0xF8,0xFE,0x3F,0x8F,0xEF,0x8D, 0xFF,0xFF,0xEF,0x7F,0xBF,0xFF,0xFB,0xFF,
+0xDB,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xEF,0xD8,0xFF,0x2E,0x7F,
+0xBE,0xEF,0xFE,0x6E,0xFF,0xBF,0xF9,0xFF, 0xFF,0xF3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFC,0x66,0xBE,0x47,0xF3,0x7F,0xDF,0xFE, 0x87,0x9F,0xFF,0xFF,0xFF,0xFF,0xE7,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xD6,0x6F,0x7C, 0xFB,0x4F,0xD2,0xFF,0xFD,0x2B,0xFE,0xFF,
+0xFF,0xFD,0x5F,0xD7,0xD5,0xF5,0x7D,0xFF, 0xFF,0xFF,0xBF,0x9B,0xFF,0xFF,0xDF,0xB7,
+0xFF,0xFF,0xDF,0xFF,0x3F,0xCF,0xFE,0x7F, 0xBF,0xEF,0xFB,0xFC,0xFF,0x3F,0xFF,0xD9,
+0xBF,0xFE,0x97,0xEC,0x8F,0xB7,0xFE,0x9B, 0x7D,0xFD,0xB7,0xDD,0x77,0x1D,0xC7,0x71,
+0xDD,0x77,0x5D,0xD7,0xF3,0x6F,0xFD,0x3F, 0x73,0xDD,0xAF,0xFD,0x7A,0xFF,0xFF,0xAF,
+0xFE,0xFD,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF, 0xEF,0x66,0x7F,0xFF,0xFF,0xBF,0xBF,0xFF,
+0xFB,0xFF,0xF7,0xDF,0xFD,0xFB,0x7D,0xDF, 0xB7,0xCD,0xF3,0x7C,0x5F,0x3F,0x91,0x3F,
+0xFF,0x3D,0xEF,0x7B,0xFF,0xFC,0xFF,0xCA, 0xEF,0xFE,0xFF,0xBD,0xEF,0xFB,0x1E,0xE7,
+0xBB,0xEC,0x7F,0xB3,0xFF,0xFD,0x9F,0xFF, 0xFF,0xFE,0xFF,0xFF,0x7F,0xBF,0xFB,0xFE,
+0xFF,0xBF,0xEF,0xFB,0xEE,0xFB,0xBF,0xDF, 0x67,0xFF,0xFF,0xBF,0xEF,0xDB,0xFF,0xBC,
+0xFE,0x7F,0xFB,0xFF,0x9F,0xEF,0xF9,0xFE, 0x7F,0x9F,0xE7,0xF9,0xFE,0x87,0xFF,0xEE,
+0xFB,0xBE,0xE5,0xBF,0xEF,0xF9,0xD7,0x65, 0xF7,0xDD,0xE7,0x7D,0xDF,0x77,0x5D,0xD7,
+0x7F,0xF8,0x9B,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xFF,0xBF,0xEF,0xFB,0xFF,0x7F,0xCF,
+0xF3,0xFC,0xFF,0xBF,0xEF,0xFF,0xDB,0x3F, 0xEF,0xFB,0xFE,0xFF,0xDF,0xFF,0xFE,0xFB,
+0xBB,0xEF,0xBF,0xEF,0xBB,0xEE,0xFB,0xBE, 0xEF,0xBB,0xFF,0xFC,0x7F,0xFD,0x3B,0x5B,
+0xD6,0xE5,0xFD,0x4F,0xC3,0xFB,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFF,
+0xB4,0xFF,0xFA,0xBC,0x8F,0xB2,0xE9,0xD2, 0x2E,0xCF,0xFB,0xFF,0xBF,0xEF,0xFB,0xFE,
+0xFF,0xBF,0xEF,0xFB,0xFF,0xEC,0xFF,0xFD, 0xFD,0x7F,0xDF,0xF7,0xE4,0xDF,0x5F,0xFF,
+0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xC3,0xFF,0xEF,0xE6,0xF8,0xFE,
+0x3F,0x8B,0x83,0xF9,0xFE,0x7F,0xE7,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x17,
+0xFD,0xFF,0xFF,0xFF,0x7F,0x5F,0xF7,0x2C, 0xFF,0xFF,0xFF,0xFE,0x7F,0xFF,0xE7,0xF9,
+0xFE,0x7F,0x9F,0xFE,0x2F,0xFF,0xFF,0xEF, 0xFF,0xFE,0xBF,0xEF,0xAD,0xFF,0xFF,0x7F,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFE,0xDF,0xFF,0xDF,0xFF,0xFD,0xFD,0x7F,
+0xDF,0xF7,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFA,0x3F,0xFE,
+0xF7,0xFD,0xEF,0x7A,0xFF,0xB1,0xBD,0xFF, 0x7F,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,
+0xFF,0x7F,0xF3,0x27,0xFF,0xDF,0xFF,0xDD, 0xFF,0xFC,0x9B,0xFF,0xCB,0xFC,0xBF,0x2F,
+0xCB,0xF2,0xFC,0xBF,0x2F,0xC9,0xFF,0xDE, 0xFF,0xDF,0xAF,0xEB,0xDA,0xFE,0xBB,0xAF,
+0xEB,0xF8,0xF7,0xAF,0xE8,0xFA,0xFE,0xBF, 0xAF,0xEB,0xF2,0xFF,0xFD,0xFF,0xFF,0xEF,
+0xBD,0xD7,0xBF,0xFF,0xFF,0xDE,0x8F,0xB8, 0xDE,0x37,0x8D,0xA3,0x78,0xDA,0x3F,0x8F,
+0xFF,0xA1,0xFF,0xFF,0xFB,0xFB,0xFF,0xFF, 0xFF,0xFF,0xA7,0xBD,0xFB,0x76,0xFD,0xBF,
+0xEF,0xDB,0xFE,0xBB,0xBF,0xFE,0x27,0x7F, 0xFF,0xFE,0xFE,0xFD,0xF5,0xFF,0xEF,0xF5,
+0xDF,0x1F,0xE7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0xFF,0xCD,0xFD,0xAE,0xFF,0xFA,
+0x3E,0x3F,0xAB,0xFD,0xF8,0x7E,0x8F,0xE3, 0xF8,0xFE,0x3E,0x8F,0xE3,0xF8,0xFF,0xFE,
+0x1F,0xEF,0xDF,0xBF,0xFE,0xDE,0xDF,0xD9, 0xFF,0xDF,0xBC,0xFF,0xFF,0x7F,0xFF,0xEF,
+0xFD,0x7F,0xDF,0xF7,0xF9,0x3F,0xFE,0xFF, 0xFF,0x6F,0xFE,0xDE,0xBF,0xF7,0xED,0xEA,
+0xFD,0x8F,0x83,0xF8,0xEA,0x3F,0x8F,0xEF, 0xFF,0xF4,0x7F,0xFF,0xEF,0xEF,0x7B,0xF3,
+0xF1,0x5F,0xFF,0xFF,0xF1,0x3B,0x7F,0xDF, 0xF7,0xFD,0xFF,0xFF,0xFF,0xFF,0xE0,0xFF,
+0xFF,0xFF,0xF7,0xFF,0x6F,0xFF,0x7F,0xFF, 0xFF,0xF7,0xDE,0xF7,0xBF,0xEF,0xFB,0xF7,
+0xFD,0xFF,0xFF,0xF5,0xFA,0xFF,0xFF,0xFB, 0xE7,0xFF,0xF3,0xF8,0x7F,0xF3,0xDF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x1F,0xEF, 0xBB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,
+0xFF,0x7F,0xFF,0x9F,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xCF,0xFF,0x37,0xFF,0xFF,
+0x7F,0xDF,0x77,0x5D,0xE7,0xFC,0xFF,0xBF, 0xF7,0xF5,0xFB,0xFF,0xFF,0xD7,0xF5,0xFB,
+0xFF,0xFF,0x45,0xFD,0x7F,0xEA,0xFD,0xBE, 0xBF,0xDF,0xF7,0xFF,0xFF,0xDB,0xFB,0xFE,
+0xFF,0xBF,0xEF,0xFF,0xFF,0xFF,0xFB,0x5F, 0x7F,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFE,0xFF,0xEF,0xFD,0xFF,0x7F,0xDF, 0xFF,0xEF,0xFB,0xF8,0x0F,0xF3,0xFF,0xF9,
+0x2E,0xFB,0xFE,0xFC,0xF3,0xEF,0xFF,0xFF, 0xBF,0xFF,0xFB,0xE7,0xFF,0xFE,0x7E,0xFF,
+0xC0,0x6B,0xCF,0xFF,0x34,0xDF,0xF1,0xFD, 0xFF,0xEF,0xFF,0xFF,0xFF,0xDF,0xF7,0xFD,
+0xCF,0x7F,0x9C,0xFD,0xFD,0x6C,0xF7,0xFF, 0xF6,0xFD,0xEB,0x2B,0x9F,0xFF,0xFC,0xFE,
+0x7E,0xFF,0xFF,0xFF,0xFF,0xD7,0xF3,0xF7, 0xFF,0xFB,0xE1,0xBF,0xFF,0xEB,0x7A,0xDE,
+0xD7,0xFB,0xFF,0xF9,0xFE,0xFF,0xFF,0xF3, 0xDE,0x7F,0xFD,0xE7,0x7F,0xFF,0xFD,0xBB,
+0xFF,0xFF,0x7E,0xCC,0xF6,0xAF,0x5F,0x7F, 0xFE,0xF4,0x7D,0xF7,0xFD,0xBB,0x6E,0xDB,
+0xB7,0xFF,0xF7,0xDF,0x66,0xFF,0xFF,0xF7, 0x3D,0xCF,0xDE,0xBD,0xFF,0xFF,0xDE,0xDB,
+0x8D,0xF7,0x7E,0xDF,0xB7,0xEF,0x7F,0xFF, 0xF6,0x87,0xFF,0xFF,0xEF,0xFE,0xDE,0xBF,
+0xFF,0xFF,0xFF,0xBB,0xEF,0xFD,0xFF,0x7B, 0xDE,0xF7,0x3F,0xFF,0xBF,0xFB,0xDB,0xFF,
+0xF2,0xB6,0xFD,0xBD,0x7F,0xE7,0xFF,0xFF, 0xFF,0x6F,0xF7,0xFF,0xFF,0xFF,0xFE,0x77,
+0xFF,0xBF,0xF8,0xAF,0xFF,0xDF,0xBF,0xFF, 0xBF,0x7F,0xFB,0xFF,0xFF,0xFF,0xDB,0xFE,
+0xFF,0xBF,0xFF,0xFA,0xFF,0xFD,0xFF,0xF6, 0x7F,0xFF,0x9F,0xFF,0xFF,0x3F,0xEF,0xF8,
+0xEE,0x7E,0x9F,0xBA,0xFE,0xBF,0x8F,0xEF, 0xFE,0xFE,0xF9,0xFF,0xFA,0x7F,0xFE,0x7E,
+0xBF,0xAF,0xFB,0x96,0xFD,0x9F,0xEF,0x5E, 0x65,0xBE,0xEF,0x5B,0xB6,0xFF,0xBE,0xE3,
+0xFF,0xB5,0xBF,0xFF,0xFD,0xFF,0x7F,0xFF, 0xEF,0xDF,0xFE,0xFF,0xBF,0xFB,0xFE,0xFF,
+0xBF,0xCF,0xFF,0xFF,0xFF,0xFD,0x9B,0xFF, 0xFE,0xFB,0xFE,0xDF,0xFF,0x7F,0xFF,0xF7,
+0xFE,0xFF,0xDF,0xFB,0xFB,0xFE,0xFF,0xFF, 0xFF,0xFF,0xFF,0xB7,0xFE,0xFA,0xFF,0xAB,
+0xEF,0xFF,0xFD,0xB5,0x7B,0x7F,0xFB,0xF7, 0xFD,0xFF,0xFF,0xDD,0xFF,0xEF,0x8F,0xFF,
+0x2F,0xFF,0xFB,0x7C,0xFF,0x3F,0xDF,0x73, 0xEB,0xFE,0x3F,0xFF,0xEF,0xFB,0xFE,0xFF,
+0xEF,0xFD,0xFF,0xBF,0xFD,0x0F,0xFF,0xFF, 0xFF,0xF5,0xF9,0xFF,0x7F,0xD7,0xFD,0xFF,
+0xDF,0xFF,0xF7,0xFB,0xFF,0x7F,0xBF,0xFF, 0xFF,0xF0,0x9F,0xFF,0xFE,0x7F,0x8B,0xE3,
+0xF9,0xDE,0x27,0x9B,0xE6,0xBE,0x7F,0x9B, 0xC3,0xF8,0xDE,0x7F,0x9D,0xE7,0xFE,0x7F,
+0xFF,0xFF,0x5F,0xD7,0xFF,0xFF,0xFF,0x4F, 0xFB,0xFF,0xFF,0x7F,0xFF,0xAF,0xFF,0x9F,
+0x7F,0xFB,0xFF,0xE8,0xFF,0xFF,0xFE,0xBF, 0xAF,0xFF,0xFF,0xFE,0xBF,0xEF,0xF7,0xFF,
+0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF, 0xFC,0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xFF,
+0xFD,0x3F,0xCF,0xFF,0xFF,0xFF,0xFF,0xF7, 0xFF,0xFD,0x7F,0xFF,0xFF,0x93,0xFF,0xFF,
+0x7A,0xDF,0xF7,0xFF,0xFF,0x7B,0x7F,0xB7, 0xEF,0xFF,0xFF,0xFD,0xBF,0xFD,0xFB,0xFF,
+0xF7,0xFF,0xD7,0xFF,0xFF,0xFF,0xFC,0x9F, 0x6F,0xCB,0xFF,0xF4,0xBB,0xDF,0xD6,0xFD,
+0xBF,0x2F,0xD3,0xF7,0xFF,0xDF,0xFF,0xCF, 0xFF,0xFA,0xBE,0xBD,0xAF,0x6A,0xDA,0xBE,
+0xBB,0xAB,0x3A,0xBE,0x2D,0xAE,0xEB,0xDA, 0xF6,0x3F,0xAD,0xF5,0xDD,0xFF,0xCF,0xF1,
+0xFF,0xF9,0x7F,0xFF,0x73,0xFE,0xFF,0xCF, 0xC3,0xF4,0xF7,0x2F,0xF3,0xFF,0xFC,0xFF,
+0x7C,0x1F,0xFF,0x3F,0x4F,0xFF,0x7E,0xFF, 0xEF,0xBD,0xF6,0xFE,0xFF,0x2B,0xEF,0xDC,
+0xFB,0xFD,0xFF,0xFB,0xFF,0xEA,0x7B,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFB,0xF7,0xDF,0xFF,
+0xE3,0x7D,0xFF,0xB7,0xFF,0xBF,0xFF,0xFF, 0xDF,0xFF,0xF8,0xFF,0xBF,0xFF,0xBF,0xEB,
+0xE7,0xFA,0xFE,0x3D,0xBF,0xE9,0xFC,0xBF, 0xFF,0xFA,0xFB,0xFE,0xFF,0xFF,0xFF,0xD9,
+0xFF,0xFF,0xFF,0xF6,0x7F,0xFF,0xF6,0x7D, 0xFF,0xDF,0xCF,0xFD,0xBF,0xFB,0xEF,0x7E,
+0xFF,0x7F,0xFF,0xFF,0xD3,0xFF,0xFD,0xFB, 0xFF,0xFB,0xFF,0xFF,0xFF,0xEF,0xFF,0xBF,
+0xFE,0xFF,0xF7,0xEF,0xFF,0xFF,0xFF,0xFB, 0xFF,0x87,0xFF,0xFD,0xFF,0xFF,0xFF,0xFF,
+0x7B,0xFE,0xFF,0xFE,0x3B,0xF7,0xF7,0xFF, 0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xFF,
+0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,0xFF,0xF7, 0xFF,0xFF,0xAD,0xFF,0xFE,0xF7,0xFF,0xFF,
+0x5F,0xFF,0xFF,0xDF,0xFF,0xFD,0xFF,0xF5, 0xFF,0xDF,0xFF,0xBD,0xFF,0xE9,0xFF,0xC7,
+0xF3,0xFF,0xFF,0xF7,0xFF,0xF3,0xFF,0xF8, 0x3B,0xFF,0xFF,0x7B,0xDF,0xBF,0xFB,0xEF,
+0xFB,0xFF,0xFB,0xF7,0xF7,0xBB,0xFF,0xFF, 0xFF,0xFF,0xFB,0xFF,0xFE,0x7F,0xF3,0x7F,
+0x5E,0xB7,0xBF,0xFD,0x7F,0xFF,0xF9,0x7F, 0xFB,0xFF,0xEB,0xFD,0x7F,0x7F,0xFF,0xEF,
+0xFB,0xE0,0x3F,0xFE,0xBF,0xBF,0xDF,0xFF, 0x7E,0xFF,0xF7,0xFF,0xFF,0xFE,0xBF,0xFF,
+0xDB,0x78,0xFF,0xFF,0xFF,0xEE,0xA1,0xBF, 0xF5,0xDE,0xFB,0xF7,0xFF,0xFB,0xFF,0xFF,
+0xFF,0xFF,0xFB,0xFF,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xEF,0xF0,0xFF,0xFF,0xFF,0xF3,
+0xF7,0xFF,0xEF,0xFF,0xE7,0xCF,0xFF,0xFB, 0xFF,0xEF,0xFF,0xFF,0x9F,0x9F,0xEF,0xFC,
+0x16,0xBF,0xFE,0xF3,0xE4,0xFF,0xFF,0xC6, 0xFF,0xE7,0xFF,0xFF,0xFD,0xFF,0xBF,0xFF,
+0xFF,0x3F,0xFF,0xBF,0xD6,0xAF,0x7F,0xFE, 0x6B,0x7E,0x7F,0xFF,0xAF,0xFF,0xFF,0xBF,
+0xFF,0x5F,0xFF,0xFE,0xFF,0xFF,0xFE,0xFF, 0xFF,0xBD,0xDB,0xFF,0xFE,0x5F,0xF2,0xFF,
+0xFF,0x5F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xEF,0x7F,0xFF,0xFF,0xFF,0xFF,0xDE,0xBF,
+0xFF,0xFF,0xEF,0xFB,0x77,0xFE,0xBD,0x7F, 0x5F,0xFF,0xFF,0xFF,0xDF,0x6F,0xED,0xFF,
+0xFD,0xFF,0x7F,0xFD,0x6F,0xFF,0xFF,0x77, 0xDA,0xCF,0xFD,0x5F,0xFF,0xBF,0xFF,0xFF,
+0xDF,0x7F,0xFF,0xFB,0xFF,0xFF,0xFF,0xFF, 0x66,0x7F,0xFF,0xFE,0xBF,0xE7,0xBF,0xFA,
+0xFF,0xFE,0xFF,0xFF,0xFF,0xDF,0xFF,0x59, 0xEF,0xFF,0xEF,0xFB,0x7F,0x89,0xFF,0xFF,
+0xE9,0xFF,0x6F,0xFF,0xF5,0xFF,0xFF,0xFF, 0xFF,0xFF,0x7F,0xF2,0xF7,0xFF,0xFF,0xEF,
+0xF8,0x7F,0xFB,0xFF,0xFD,0xFF,0xFF,0xD9, 0xFF,0xEF,0xBB,0xFF,0xFF,0xFF,0xBF,0xEF,
+0xDE,0xFF,0xFF,0x9F,0x7F,0xDF,0xFF,0xF7, 0xFF,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF,0xAF,
+0xFF,0xFF,0xF7,0x3F,0xEB,0x9F,0xFE,0x7F, 0x9E,0x7F,0x9F,0xFE,0x87,0xFF,0xED,0xDB,
+0x56,0xFF,0xBF,0xAF,0x0B,0xD2,0xFF,0xEF, 0xDB,0x6E,0x7D,0xBD,0x6F,0xF8,0xFE,0x3F,
+0xFA,0x5B,0xFF,0xFD,0xBF,0xEF,0xFF,0xBF, 0x6F,0xDB,0xE6,0xFF,0xFF,0x3F,0xFF,0xDF,
+0xFE,0xFF,0xFF,0xFF,0xFF,0xDA,0x3F,0xFF, 0xFB,0xFE,0xFE,0xFF,0xFF,0xDF,0xF7,0xBD,
+0xFF,0xFD,0xFF,0xFE,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFF,0xF1,0x5F,0xFD,0x9F,0xDF,0xFD,
+0xFF,0xFD,0x7F,0xFF,0xFF,0xFF,0xFF,0x76, 0xFA,0xFF,0xFF,0x7F,0xE3,0xF8,0xFF,0xAE,
+0xFF,0xFB,0x7E,0x9D,0x73,0xFF,0xFA,0x7F, 0xDF,0xFF,0xFF,0x7F,0xFF,0xFB,0xCD,0xFF,
+0x7F,0xEF,0xFB,0xFF,0xFD,0xFF,0xF7,0x7F, 0x7F,0xEF,0xFF,0xED,0xFF,0xFF,0xFF,0xB5,
+0xFF,0xBF,0xFF,0xBF,0xFD,0xEF,0xDB,0xF7, 0xFF,0x93,0xFF,0xEF,0xE2,0xF9,0xBE,0x7F,
+0x8B,0xE7,0xF9,0xFE,0x6B,0xE7,0xF9,0xFE, 0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x47,0xFF,
+0xFF,0xFD,0xFF,0x9F,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xF5,0xFF,0x9F,0xFF,0xF7,0xFE,
+0xFF,0xBF,0xFE,0x6F,0xFF,0xFF,0xFB,0xFF, 0xFF,0xFF,0xAF,0xFF,0xFF,0xFF,0x7F,0xFB,
+0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, 0xDF,0xFF,0xFF,0xF7,0xFF,0xFF,0xFF,0xDF,
+0xFF,0xFF,0xFF,0x5F,0xFF,0xFF,0xFF,0xFF, 0x5F,0xFB,0xFE,0xFF,0xF8,0x37,0xFF,0xFF,
+0xEF,0xFF,0x7F,0xFE,0xBF,0xFF,0xFF,0xFE, 0xBF,0xFF,0xFF,0x7F,0xFF,0xBF,0xFD,0xFF,
+0x7F,0xFA,0x7F,0xFF,0xFF,0x6F,0xFF,0xFF, 0x7D,0xFF,0xCF,0xFF,0xFF,0xFF,0x4F,0xFF,
+0xF2,0xFF,0xFF,0xFF,0xFF,0xFF,0xFA,0xBF, 0xFF,0xAE,0xEB,0xFA,0xFE,0xBB,0xAD,0xEB,
+0xFA,0xF7,0xAF,0x6B,0xFA,0xF6,0xBF,0x25, 0xE9,0xF2,0x7F,0x45,0xFF,0xFF,0xFD,0xF7,
+0xF7,0xBF,0xFF,0xDF,0xFF,0xFF,0xBF,0xFB, 0xFF,0xDF,0xF3,0xFF,0xF7,0x3F,0xCF,0xFF,
+0xA1,0xFF,0xFF,0xBF,0xE7,0xFF,0xFF,0x7F, 0xFF,0x3D,0xFF,0xFF,0xFF,0xF7,0xFF,0x2F,
+0xFF,0xFB,0xF5,0x7F,0xFE,0x57,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,
+0x3F,0xFF,0xFE,0xFF,0xFF,0xFF,0xFD,0xFE, 0xF7,0xEE,0xAF,0xFE,0xEE,0xE7,0xFA,0xFF,
+0xFE,0x9D,0xF9,0x5E,0xFE,0xFF,0xEB,0xFF, 0xFF,0xDF,0xA7,0xFF,0xFF,0xFF,0xFC,0xDB,
+0xFF,0xFF,0xFF,0x7E,0xFB,0xFF,0xFF,0xEF, 0xFB,0xFD,0xFF,0xDB,0xFF,0xFF,0xFF,0xEF,
+0xFF,0xFF,0xFF,0xFD,0xBF,0xFE,0xBF,0xFF, 0x6F,0x7F,0xFF,0xF7,0xFF,0xFF,0xF9,0xFF,
+0xF7,0xFF,0xBF,0xDE,0xF7,0xFF,0xFF,0xFF, 0xFA,0x7F,0xFD,0xBF,0x5F,0xFF,0xFF,0xBF,
+0xFF,0xED,0xFF,0xF7,0xBF,0xFF,0xFF,0xEF, 0xFF,0xDF,0xFF,0xFF,0xFF,0xE6,0xFF,0xFB,
+0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEB,0xFF,
+0xFD,0xFF,0xF5,0xFF,0xF6,0x7F,0xDF,0xBD, 0xCF,0xFF,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF,
+0xFF,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3, 0xFF,0xEE,0xBF,0xFF,0x7D,0xEF,0xFE,0xFF,
+0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFE, 0xFF,0xFF,0xFF,0xFF,0xE7,0xFF,0xB5,0xAE,
+0xFF,0xFF,0xB6,0xFE,0xBF,0xFF,0xFF,0xBF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0x27,0xFF,0xEF,0xFE,0x7F,0xDF,0xFF, 0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFD,0xFF,0xF7,0xF9,0x9F,0xFF, 0x5F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,
+0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0x0F,0xFF,0xE7,0xBF,0xFE,
+0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFC,0xBF, 0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xC4,
+0x6B,0xFF,0x29,0x1F,0xFB,0xAF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xEF,0x1B,0xFE,0xFF,0xFC,
+0x6F,0xFF,0xFF,0xFD,0x6A,0xF7,0xD7,0xF5, 0xBF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFE,0xBF,0xFF,0xFF,0xFA,0xFF,0xFF,0xF7, 0xFB,0xDD,0xBF,0xFF,0xE7,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0x7F,0xFF, 0xFF,0xF5,0xFF,0xFF,0xF7,0xFD,0xB3,0xEF,
+0xFD,0x7E,0x5D,0xFF,0xFD,0xFF,0xFF,0xFF, 0xFD,0x7F,0xD2,0xF5,0xFB,0x7E,0xCB,0xB7,
+0xFF,0xFF,0xFF,0xC6,0xFF,0xFD,0xEE,0x63, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF6,0xFD,0x65,
+0x5B,0xDF,0xFF,0xD5,0xFF,0xFF,0xFF,0xF6, 0xE7,0xBF,0xF7,0xA9,0xFF,0xFF,0xED,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xEB,0xFF,0xFF,0xFF, 0xAF,0xFF,0xFF,0xFF,0xF8,0x1B,0xFF,0xE3,
+0xD0,0xBF,0xFF,0xE1,0xFF,0xFF,0xFF,0xFF, 0xFF,0xD7,0xFF,0xFF,0xFF,0x5F,0xFF,0xFF,
+0xFF,0xFF,0xAF,0xFF,0xDB,0x76,0xBF,0xFF, 0x7F,0xFF,0xBF,0xEF,0xFE,0xFF,0xBF,0xEF,
+0xFB,0xFE,0xFF,0xFF,0xFF,0xBF,0xF2,0x7F, 0xFF,0x9F,0xFE,0xBD,0xFE,0x7F,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xF7,0x3F,0xEC,0x7F,0xF6,0x95,0xBB,
+0xEF,0xF8,0xFE,0xFC,0xBF,0x2F,0xDA,0xFC, 0xBF,0x2F,0xCB,0xF2,0xFC,0xBF,0xEF,0xFF,
+0xA9,0xBF,0xCF,0xFB,0xFF,0xFF,0xFF,0xFE, 0xDD,0xB7,0x6D,0xF6,0xD9,0xB6,0x6D,0x9B,
+0x76,0xD9,0xBF,0xFB,0xFD,0xA3,0xFF,0xBF, 0xEF,0xFF,0xEF,0xFF,0xFF,0xFF,0x7F,0xDF,
+0xFD,0xEF,0x7B,0xDE,0xF7,0xFD,0xEF,0x7F, 0xFF,0xFF,0x05,0xFF,0xFA,0xFE,0x7F,0xEF,
+0xE3,0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xFF, 0xFF,0x5F,0xFF,0xFF,0xFD,0x7F,0xFB,0xAF,
+0xFF,0x63,0xC8,0xFF,0xBF,0xEF,0xFF,0xFF, 0xFA,0x7F,0xFF,0xFF,0xFF,0xFE,0x9F,0xF7,
+0xFF,0xFA,0xBF,0xFE,0x9F,0xFB,0x7F,0xFF, 0xFF,0xEF,0xD7,0xFF,0xFF,0xF5,0xFF,0xFF,
+0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xBF,0xFF, 0xF9,0xBF,0xFF,0xBE,0x27,0x9F,0xE7,0xF9,
+0xFE,0x7F,0x8B,0xE7,0xFE,0x7F,0x9F,0xE2, 0xF9,0xFE,0x7F,0x9F,0xE7,0xF1,0x7F,0xFF,
+0xFF,0xFF,0xFB,0xFE,0xFF,0xFF,0xFF,0xD7, 0xFF,0xFF,0xFF,0xFF,0xF5,0xFF,0xFF,0xFF,
+0xD7,0xFF,0xFA,0xFF,0xFE,0xFF,0xFF,0xFF, 0xFD,0xFF,0xFF,0xFF,0xAF,0xF7,0xFF,0xFF,
+0xFF,0xEB,0xFF,0xFF,0xFF,0xAF,0xFF,0xC4, 0xFF,0xF7,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF,
+0xFF,0x5F,0xFF,0xFF,0xFF,0xFF,0xD7,0xFF, 0xFF,0xFF,0xFF,0xFF,0xEB,0xFF,0xFB,0x7A,
+0xDF,0xF7,0xFD,0xFF,0xFF,0xFE,0xBF,0xFF, 0xFF,0x7F,0xFF,0xAF,0xFF,0xFF,0xFF,0xF7,
+0xEF,0xE3,0xFF,0xDD,0xD2,0xFF,0xDF,0xFF, 0xFF,0xF2,0xFC,0xBF,0xCB,0xF6,0xFD,0xBF,
+0x2F,0xCB,0xFF,0x7F,0xDF,0xDE,0xAF,0xFF, 0xDA,0xEE,0xBF,0xAF,0xE9,0xFA,0xF4,0xBD,
+0xAF,0x5A,0xAE,0xBB,0xAB,0x6B,0xDA,0xDE, 0xBF,0xAD,0xD7,0x5E,0xFF,0xFF,0xBF,0xFC,
+0xFF,0xDF,0xFD,0xFF,0xFF,0xFF,0xFF,0xDF, 0xF7,0xFF,0xFF,0xFF,0xFF,0xFD,0xFF,0xFA,
+0x1F,0xFF,0xFE,0xFB,0xEF,0xBF,0xFD,0xFF, 0xFD,0xBD,0x77,0xFF,0xFF,0xFF,0xFF,0x9D,
+0xEF,0xFF,0xFF,0xFF,0xEF,0x7D,0xFF,0xFB, 0xFE,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEE, 0xBF,0xE4,0xFB,0xFF,0xFE,0x3F,0xFE,0xFF,
+0xFF,0xFF,0xFF,0xAF,0xEA,0xFE,0xBF,0xAF, 0xEB,0xFA,0xFE,0xFF,0xFF,0xFF,0x55,0xF6,
+0xFF,0xFE,0xF7,0xFF,0x7F,0xFF,0xEB,0xF7, 0x5F,0xC5,0xFD,0x7F,0x5F,0xD7,0xF5,0xFF,
+0x6F,0xFB,0xFF,0x8A,0xFF,0xFF,0xFF,0xFF, 0xEB,0xFF,0xFF,0xFF,0xFF,0xFB,0xBF,0xBF,
+0xEF,0xFB,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF, 0x77,0xDF,0xFB,0xFF,0xFD,0x7F,0xEF,0xFF,
+0xFF,0xFF,0xBF,0x7F,0xFF,0xDF,0xBF,0xFF, 0xFB,0xFF,0xFF,0xFF,0xFE,0xEF,0xDF,0xFF,
+0xFE,0xFF,0x9F,0xEF,0x7D,0xFF,0xF7,0xFF, 0x7F,0xFF,0xFF,0xDF,0xF7,0xFD,0xFF,0xEF,
+0xDF,0xFF,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF,0xFB,
+0xFD,0xFF,0xBF,0xDF,0xD1,0xFF,0xF8,0x3B, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0x7E,0xDB,0xFD,0xFF,0x77,0xDB,0xB7,0x7D, 0xBF,0xFB,0xFF,0xF8,0x7F,0xED,0x7B,0x5E,
+0xFF,0xFE,0xFF,0xFF,0x4F,0xD7,0xFD,0x7F, 0xDF,0xD7,0xF5,0xFF,0x7F,0xFF,0xFF,0xFF,
+0xF2,0x3F,0xFE,0xFF,0xBF,0xFF,0xFF,0xFF, 0xFF,0xBF,0xEF,0xFE,0xFF,0x3B,0xEE,0xFF,
+0xFC,0xEF,0xFF,0xFF,0xFF,0x85,0xFF,0xFD, 0xFE,0xFF,0xF5,0xFF,0xFF,0xFE,0xFF,0xDF,
+0xFB,0xFF,0x5F,0xBF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xA8,0xFF,0xFF,0x9F,0x9E,0xFF,
+0xFF,0xFF,0x7F,0xF3,0xFF,0xFF,0xCF,0xFF, 0xF7,0xFD,0xFF,0x7F,0xFF,0xFF,0xFC,0x16,
+0xBF,0xCF,0xA3,0xE5,0xEF,0x7F,0xFF,0xF3, 0xE4,0xFF,0xCF,0x93,0xFC,0xFF,0x3F,0xCF,
+0xFF,0xFF,0xFF,0xD6,0x0F,0x7D,0xBF,0x6E, 0xFB,0xF4,0xFC,0xAF,0x6D,0xDB,0x77,0xB7,
+0x6D,0xDB,0xF6,0xFD,0xBF,0xFF,0xFF,0xFF, 0xBF,0x9B,0xFA,0xDE,0xB7,0xB7,0xED,0xF9,
+0x7E,0xB7,0xAC,0xEB,0xD6,0xB3,0xAD,0xEB, 0x7A,0xDF,0xFF,0xFF,0xFF,0xD8,0xBF,0xFF,
+0xB7,0xED,0x9F,0x6F,0xDD,0xF7,0x68,0xDB, 0x37,0xB3,0x6C,0xDB,0x36,0xCD,0xB3,0x7F,
+0xFF,0x7F,0xF5,0x6F,0xFD,0xEF,0x79,0x3D, 0xF7,0x93,0xE4,0x7A,0x9E,0xAD,0xEA,0x7A,
+0x9E,0xF7,0xBD,0xEF,0xFF,0xFF,0xFF,0x76, 0x7F,0xFB,0xC6,0xFF,0xBB,0xEF,0xDA,0xFE,
+0xFD,0xBF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xFF,0xFB,0xFF,0xA5,0xFF,0xFD,0xAB,
+0x6F,0x78,0xDE,0x17,0x8F,0x79,0xDF,0xFD, 0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0xFF,0xFB,
+0xFF,0xFB,0xFF,0xEF,0xFB,0xEF,0xFB,0xFE, 0xFF,0xBB,0xDA,0xF3,0xEF,0x3B,0xCE,0xF3,
+0xBC,0xEF,0x3F,0xCF,0xDF,0xFF,0xB7,0xFF, 0xFF,0xFF,0xCF,0x73,0xFF,0xBF,0xEF,0xFF,
+0xF3,0xFF,0x3F,0xCF,0xF3,0xFC,0xFF,0x3D, 0xCF,0x9F,0xFE,0x07,0xFF,0xAF,0xEB,0xFE,
+0xFD,0xBF,0xEF,0xEB,0xFA,0xFF,0xAF,0xEB, 0xFA,0xFE,0xBF,0xAF,0xFB,0xFE,0x3F,0xFB,
+0x9B,0xFF,0x7F,0xDF,0xFF,0xF3,0xFE,0xFF, 0xDE,0xF7,0xBF,0x7B,0xDE,0xF7,0xBD,0xEF,
+0x7B,0xFE,0xFF,0xFF,0xDF,0x3F,0xFE,0xFF, 0xB7,0xFF,0xEF,0xF7,0xFF,0xBF,0xED,0xFE,
+0xDF,0xB7,0xED,0xFB,0x7E,0xDF,0xFF,0xFF, 0xFF,0xFD,0x5F,0xEF,0xEB,0xFA,0xFE,0xF5,
+0xBF,0x6F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xF8,0xFF,0xA8,0xFF,
+0xFF,0xBF,0xEF,0xFB,0x6A,0xFB,0xB7,0xEF, 0xFB,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,
+0xEF,0xFB,0xFF,0xE0,0xFF,0xFF,0xFD,0x7F, 0x5C,0xD7,0x7D,0xDF,0xF3,0x5C,0xF5,0xCD,
+0x73,0x5E,0xD7,0xB5,0xFD,0x7F,0xEF,0xFF, 0xDB,0xFF,0xFF,0xE2,0xF8,0xBE,0x2F,0x8F,
+0xE7,0xF8,0xBE,0x6B,0xE2,0xF8,0xBE,0x2F, 0x8B,0xE2,0xF9,0xFE,0x7F,0xE7,0xFF,0xD7,
+0xF5,0xFD,0x7F,0xFF,0xF7,0xF5,0xFD,0x7F, 0xD7,0xF5,0xFD,0x7F,0x5F,0xD7,0xF5,0xFF,
+0xFF,0xFF,0x8F,0xFF,0xAF,0xEB,0xFA,0xFF, 0xFF,0xBF,0xEB,0xFA,0xFF,0x2F,0xEB,0xFA,
+0xFE,0xBF,0xAF,0xEB,0xFF,0xFF,0xFE,0x5F, 0xFF,0x5F,0xFF,0xFF,0xFD,0xFF,0xFF,0xD7,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xBF,0xFE,0xB7,0xFD,
+0xFF,0x7E,0xDF,0xF7,0xAD,0xFF,0x7F,0xF7, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F,
+0xF6,0x7F,0xFF,0xFF,0xFF,0xDB,0xF6,0xFC, 0xAF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xEC,0xBF,0xFF, 0xAF,0xEB,0xFA,0xF6,0xAB,0x8F,0xEB,0xFA,
+0xF7,0xA5,0xEB,0xFA,0xBE,0xBF,0xAF,0xEB, 0xFA,0xFF,0x6D,0xFF,0xFF,0x7F,0xDF,0x33,
+0xDD,0xFF,0x7F,0xFE,0xF7,0xFC,0x7F,0xFB, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xA9,
+0xFF,0xFD,0xFF,0xFF,0xFE,0xFF,0xFF,0xDF, 0xFF,0xFF,0xEF,0xEF,0xFD,0xFF,0x7F,0xFF,
+0xFF,0xFF,0xFF,0xFE,0xA7,0xFF,0xFF,0xFF, 0x77,0xDF,0xF7,0xFD,0x9F,0x7F,0xFE,0x77,
+0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xAF,0xBF,0xAF,0xFF,0xF9,0xBE,0xBF,
+0x8F,0xFB,0xFE,0xFE,0xEF,0xFB,0xFE,0xFF, 0xBF,0xEF,0xFB,0xFF,0xFF,0xFD,0xDF,0x6F,
+0xEF,0xFF,0x7F,0xFF,0xBF,0xBF,0xDF,0xFF, 0xFC,0xFF,0xDF,0xF7,0xFD,0xEF,0x7F,0xDF,
+0xFF,0xFF,0xFF,0x3F,0xF6,0xFF,0xCF,0xFF, 0xDB,0xFB,0xF7,0xFF,0xEB,0x7A,0xFF,0xFF,
+0xFF,0xBF,0xEF,0xFB,0xFF,0xFF,0xFF,0xFE, 0x6D,0xFD,0xFF,0x5F,0xFB,0xFF,0xFF,0xF7,
+0xFF,0x5F,0xF5,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xF8,0xFF,0xFB,0xFF,
+0xFF,0xFD,0xFF,0xFF,0xFF,0xFF,0xE7,0xF6, 0xBF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,
+0xFF,0xC9,0xFF,0xFF,0xFF,0xBD,0xFF,0xBF, 0xAF,0xEF,0xEF,0x3F,0xD1,0xFC,0x7F,0xFB,
+0xC7,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3,0xFF, 0xFF,0xFF,0xFF,0xFD,0xFF,0xFF,0x77,0xFF,
+0xDF,0xB7,0xFD,0xF7,0xFD,0xF7,0xFF,0xFF, 0xFF,0xFF,0xFF,0x57,0xFF,0xF7,0xA5,0xFD,
+0x3F,0xDF,0xBF,0xBF,0xFE,0x7F,0xFF,0xFF, 0xFF,0xDF,0xFA,0xFD,0xFF,0xFF,0xFF,0xFE,
+0x87,0xFF,0xE9,0xFF,0xFE,0xEF,0xBF,0xEF, 0xFE,0xFE,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFA,0x9F,0xFF,0x3F, 0xFF,0xFD,0xFD,0x57,0xDF,0xFD,0xF3,0xFF,
+0xDF,0xFD,0xFF,0x5F,0xDF,0xF5,0xFD,0xFF, 0xFF,0xF9,0x8F,0xFF,0xFF,0xFF,0xEE,0x7F,
+0xFF,0xFF,0xBF,0x5E,0xFE,0xEC,0xFB,0x3F, 0x7F,0x9F,0xEF,0xF9,0xFF,0xFF,0xCD,0x6B,
+0xFF,0xFF,0xFF,0xC5,0xF3,0xFC,0xFA,0x38, 0xFF,0xAF,0x3F,0xEE,0x7F,0x9F,0xFF,0xD9,
+0xFF,0xFF,0xFD,0x7A,0xF7,0xFF,0xF3,0xFF, 0xAF,0x6F,0xDB,0xF2,0xB9,0xE9,0xFB,0xFF,
+0xFF,0xFF,0xFE,0xFF,0xFF,0xEF,0xFF,0xFB, 0xC5,0xBF,0xFF,0xEF,0xFF,0x5E,0xB7,0xAD,
+0xCD,0x79,0x7C,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0x93,0xFF,0xEF,
+0xEA,0xFE,0xBF,0xEF,0x5B,0xD2,0xCD,0xF5, 0x6D,0x77,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,
+0xFF,0xFF,0x66,0xFF,0xD5,0x65,0x7D,0x5F, 0x75,0x9D,0x65,0x7F,0xD6,0xFB,0x4F,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF6,0xC7, 0xFF,0xBF,0xEF,0xFA,0xFE,0xFF,0xBF,0xEB,
+0xFF,0xDF,0xFF,0x7E,0xFF,0xFF,0xEF,0xFD, 0x7E,0xD7,0xFF,0x78,0xDF,0xFF,0x5F,0xDF,
+0xF5,0xBF,0x7F,0xDF,0xC5,0xFF,0x3F,0xF6, 0x7E,0xFF,0x0F,0xEF,0xF2,0x3E,0xBF,0xFF,
+0xFB,0x3F,0xFF,0xFB,0x7F,0xFF,0xB3,0xFE, 0xFB,0xF6,0xFD,0xFF,0xDA,0xF7,0xFD,0xFF,
+0x7F,0xDF,0xF7,0xBF,0xFF,0xFA,0x7F,0xFF, 0xFF,0xFF,0xFF,0x9F,0xFF,0xF3,0xDC,0xF9,
+0xBF,0xCE,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7, 0xFF,0xFF,0xE2,0x7F,0xFE,0xFF,0xBF,0xEF,
+0xEB,0xFA,0xFF,0x9F,0x67,0x1E,0xFF,0x8F, 0xE7,0xF8,0xFE,0x7F,0x8F,0xEF,0xFF,0xBD,
+0xBF,0xFF,0xFB,0xFF,0xFF,0xDF,0xF7,0xFF, 0xFC,0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFD,0xB3,0xFF,0xFF,0xEF, 0xFF,0xFF,0xBF,0xED,0xFF,0xFB,0xEE,0xFE,
+0xFF,0xFF,0xEF,0xFF,0xFE,0xFF,0xFF,0xFF, 0xFF,0xB5,0xFF,0xB7,0xFD,0xFD,0x6E,0xFF,
+0xFF,0xFE,0xFD,0x2F,0xD8,0xFE,0xBF,0x8F, 0xEB,0xF9,0xFE,0x3F,0xFF,0xFA,0xCF,0xFF,
+0xE7,0xD9,0xFA,0xBF,0xDF,0x77,0xFC,0xFB, 0x3F,0xAB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFE,
+0xFF,0xFF,0xEE,0x1F,0xFF,0xDF,0xF7,0xFF, 0xFF,0xFF,0x5F,0x97,0x35,0xBF,0x5E,0xFE,
+0xBF,0xEF,0xFF,0xF7,0xFD,0xFF,0xFF,0xFA, 0xBF,0xFF,0xBE,0x6F,0x9F,0xE7,0xF8,0xBE,
+0x2F,0x8B,0x66,0x94,0x7D,0x9D,0xE7,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF1,0x7F,0xFF,0xFF,
+0xFF,0xF7,0xF5,0xFD,0x7F,0x5F,0xFB,0xFD, 0x9E,0xFF,0xFB,0xFE,0xFF,0xFF,0xEF,0xFF,
+0xFF,0xA0,0xFF,0xFF,0xFF,0xBF,0xEF,0xEB, 0xFA,0xFE,0xBF,0xB7,0xF7,0xF7,0xFF,0xFF,
+0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xDD,0xFF, 0xFD,0xFF,0xFF,0xFF,0xD7,0xFF,0xFF,0xFF,
+0x7F,0xF5,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF, 0xBF,0xFF,0xFF,0xAB,0xFE,0xFB,0xFE,0xFF,
+0xF7,0xAF,0xFF,0xFF,0xDE,0xF7,0xEB,0x5F, 0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF,0xFF,
+0xB3,0xFF,0xC9,0xFE,0xFF,0xFF,0xFF,0xFF, 0xD6,0xFF,0xFF,0xCB,0xFF,0xFF,0xDF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFC,0x8F,0xFF,0xBA, 0xBE,0xBF,0xAF,0xEB,0x78,0xFE,0xB7,0xAD,
+0x3A,0xFE,0xB7,0xAF,0xEB,0x7A,0xFE,0xBF, 0xAF,0xFF,0x9F,0xFF,0xFF,0xDF,0xFC,0xFF,
+0xFF,0xFE,0xC3,0xFE,0xFF,0xFF,0x33,0xFC, 0xFF,0xBF,0xDF,0xF3,0xFF,0xFF,0xBB,0x9F,
+0xFF,0xFF,0xFF,0xEB,0xDF,0xFF,0xFF,0xAF, 0xF7,0x6F,0xF9,0xBF,0xEF,0xFD,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xE3,0x7F,0xFF,0xFF,0xFF, 0xFB,0xFF,0xFF,0xBF,0xFD,0xFB,0xF7,0xFF,
+0xDF,0xF7,0xFF,0xFE,0xEF,0x5F,0xBD,0xFF, 0xFA,0xFF,0xF8,0xFF,0xBF,0xAF,0xFB,0xFE,
+0xFE,0x3F,0xEF,0xE8,0xFF,0xDF,0xF3,0xFD, 0xFF,0xFF,0xFF,0xFF,0xFF,0xED,0xFF,0xFB,
+0xFD,0xFF,0xAF,0xFF,0xFF,0xFE,0xFE,0xBF, 0xDB,0xFF,0xFF,0xFF,0xBF,0xFF,0xDF,0xFF,
+0xFD,0xFF,0xCB,0xFF,0xFF,0xFF,0xFF,0xFF, 0xBF,0x6F,0xFF,0x7F,0xB7,0xB3,0xFF,0xFF,
+0xDF,0xFF,0xFB,0xEF,0xFF,0xFF,0xFF,0x07, 0xFF,0xFB,0xFF,0xFF,0xFF,0xED,0xFF,0xF5,
+0x7C,0xFF,0x7F,0xFE,0xFF,0xFF,0xEF,0xCF, 0xFF,0xFB,0xFF,0xFF,0x2F,0xFF,0xFF,0xFF,
+0xFF,0xF3,0xFF,0xFB,0xFF,0xFE,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,
+0xFD,0x1B,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFE,0x7C,0xFF,0xFF,0xFF,0xFF,
+0xEF,0xFF,0xFF,0xFF,0xFF,0xFB,0xBF,0x7F, 0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xDB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, 0xFF,0xFF,0xF0,0x7F,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF,0xDF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0xBF,0xFE,
+0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xEF,0xFE,0xFF,0xBF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xEF,0xFA,0xB5,0xFF,0xFF,0xFF, 0xF7,0xF7,0xFF,0xFF,0xFF,0xFF,0xDF,0xFB,
+0xFC,0xFF,0xFF,0xFE,0xFF,0x7F,0xDF,0xBF, 0xFF,0xCB,0xBF,0xF9,0xFE,0x7F,0x9F,0xE7,
+0xF9,0xFE,0x7F,0x97,0xE1,0xFE,0x79,0x9F, 0xE7,0xFD,0xFE,0x7F,0xDF,0xFE,0x37,0xFF,
+0xFB,0xDE,0xDE,0xBD,0xEF,0xF3,0xFE,0xFB, 0xAF,0xEB,0xFE,0xFF,0xFF,0xCF,0xFF,0xFE,
+0xFF,0xBF,0xFF,0x8F,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xE7,0xF9,0x5E,0x7F,0xEF,0xFB,
+0xDA,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFD, 0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDF,
+0xFF,0xFF,0x7F,0xFF,0xFF,0xF7,0xFB,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFC,0x3F,0xFF,0xBF,
+0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0x7B,0x7F, 0xBF,0xEF,0xFB,0xFE,0xFF,0xB5,0xEF,0xFB,
+0xBF,0xFA,0x7F,0xFC,0xFF,0x3F,0xCF,0xF3, 0xFC,0xFF,0x3F,0xCF,0xBC,0xFF,0x3F,0xEF,
+0xF3,0xFC,0xFE,0x3F,0xCF,0xFF,0xEE,0xEF, 0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0x6A,0xD7,
+0xB7,0xFB,0xF8,0xFF,0xB7,0xEF,0xBA,0xFE, 0xFF,0xBF,0x7F,0xE9,0xFF,0xF9,0x7E,0x5F,
+0x97,0xE5,0xF9,0xFE,0x7F,0xBF,0xF9,0x7E, 0x5F,0x9F,0xE5,0xFB,0xFE,0x5F,0xB7,0xFF,
+0xA3,0xFF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0x5E,0xF7,0x7D,0xFF,0x77,0xDF,
+0xF7,0xFD,0xFF,0x7F,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xDF,0xFB,0x7F,
+0xFF,0xFF,0xEF,0xFF,0xFE,0xFB,0xFF,0xFF, 0xBF,0xFE,0x8F,0xFF,0xDF,0xF7,0xFD,0xFD,
+0x7F,0xDF,0xF7,0xFD,0x3E,0xDF,0xF5,0xBD, 0xFF,0x7F,0xDF,0xF7,0xFD,0xF7,0xFF,0x9F,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFD,0xFF,0xBE,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFD,0x3F,0xFF,0xDF,0xF7, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0xCF,
+0x77,0xFC,0xFF,0x5F,0xDF,0xF7,0xFD,0xFF, 0xF4,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFD,0xFF,0xFF,0xFF,0xEE,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xED,0xFB,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xE9,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFB,0xFF,0xFF,0xFF,0xD3,0xFF,0xFF,
+0xBF,0x3F,0xFB,0xFF,0xFF,0xFF,0xFB,0xF3, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xF7, 0xFF,0xFF,0xFF,0xFF,0x17,0xFF,0xFF,0xFF,
+0xDF,0xFF,0xFD,0xFF,0xFF,0xFF,0xFF,0xFF, 0xDF,0xDF,0xFF,0xFD,0xFF,0xFF,0xDF,0xF7,
+0xFF,0x4F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFD,
+0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0x9F,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xFF, 0xFF,0xFF,0x7A,0x3F,0xFF,0xFF,0xFF,0xFF,
+0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF2,
+0x7F,0xFF,0xFB,0xFE,0xFF,0xBF,0xEF,0xF8, 0xFE,0xFF,0xBF,0xFB,0xFE,0xFF,0x8F,0xEC,
+0xFB,0xFE,0xFF,0xBF,0xF8,0xF7,0xFE,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFD,0xBF,0xCF,0xEC,
+0xFF,0x3F,0xEF,0xDB,0xF8,0xFF,0xBF,0xCF, 0xFF,0xF9,0xFF,0xFF,0xBF,0xFF,0xFB,0xFF,
+0xFF,0xFF,0xEF,0xFB,0xDF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xBB,0xFF,
+0xEF,0xFB,0xFE,0xEF,0xBF,0xEE,0xEB,0xFB, 0xFE,0xFF,0xEF,0xFE,0xEE,0xBF,0xFE,0xEB,
+0xFF,0xEF,0xFF,0x17,0xFF,0x7E,0xEB,0xBB, 0xFE,0xBF,0xBE,0xFB,0xEF,0x5B,0xF7,0xBD,
+0xFB,0xCF,0xBF,0xBF,0xBB,0xFB,0x7E,0xCC, 0xEF,0xFF
+
+};
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
new file mode 100644
index 000000000000..b9ba95f5e026
--- /dev/null
+++ b/drivers/media/video/dabusb.c
@@ -0,0 +1,874 @@
+/*****************************************************************************/
+
+/*
+ *      dabusb.c  --  dab usb driver.
+ *
+ *      Copyright (C) 1999  Deti Fliegl (deti@fliegl.de)
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ *
+ *  $Id: dabusb.c,v 1.54 2000/07/24 21:39:39 deti Exp $
+ *
+ */
+
+/*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/socket.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/atomic.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+#include <linux/smp_lock.h>
+#include <linux/mutex.h>
+
+#include "dabusb.h"
+#include "dabfirmware.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.54"
+#define DRIVER_AUTHOR "Deti Fliegl, deti@fliegl.de"
+#define DRIVER_DESC "DAB-USB Interface Driver for Linux (c)1999"
+
+/* --------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define NRDABUSB 256
+#else
+#define NRDABUSB 4
+#endif
+
+/*-------------------------------------------------------------------*/
+
+static dabusb_t dabusb[NRDABUSB];
+static int buffers = 256;
+static struct usb_driver dabusb_driver;
+
+/*-------------------------------------------------------------------*/
+
+static int dabusb_add_buf_tail (pdabusb_t s, struct list_head *dst, struct list_head *src)
+{
+	unsigned long flags;
+	struct list_head *tmp;
+	int ret = 0;
+
+	spin_lock_irqsave (&s->lock, flags);
+
+	if (list_empty (src)) {
+		// no elements in source buffer
+		ret = -1;
+		goto err;
+	}
+	tmp = src->next;
+	list_move_tail (tmp, dst);
+
+  err:	spin_unlock_irqrestore (&s->lock, flags);
+	return ret;
+}
+/*-------------------------------------------------------------------*/
+#ifdef DEBUG
+static void dump_urb (struct urb *urb)
+{
+	dbg("urb                   :%p", urb);
+	dbg("dev                   :%p", urb->dev);
+	dbg("pipe                  :%08X", urb->pipe);
+	dbg("status                :%d", urb->status);
+	dbg("transfer_flags        :%08X", urb->transfer_flags);
+	dbg("transfer_buffer       :%p", urb->transfer_buffer);
+	dbg("transfer_buffer_length:%d", urb->transfer_buffer_length);
+	dbg("actual_length         :%d", urb->actual_length);
+	dbg("setup_packet          :%p", urb->setup_packet);
+	dbg("start_frame           :%d", urb->start_frame);
+	dbg("number_of_packets     :%d", urb->number_of_packets);
+	dbg("interval              :%d", urb->interval);
+	dbg("error_count           :%d", urb->error_count);
+	dbg("context               :%p", urb->context);
+	dbg("complete              :%p", urb->complete);
+}
+#endif
+/*-------------------------------------------------------------------*/
+static int dabusb_cancel_queue (pdabusb_t s, struct list_head *q)
+{
+	unsigned long flags;
+	pbuff_t b;
+
+	dbg("dabusb_cancel_queue");
+
+	spin_lock_irqsave (&s->lock, flags);
+
+	list_for_each_entry(b, q, buff_list) {
+#ifdef DEBUG
+		dump_urb(b->purb);
+#endif
+		usb_unlink_urb (b->purb);
+	}
+	spin_unlock_irqrestore (&s->lock, flags);
+	return 0;
+}
+/*-------------------------------------------------------------------*/
+static int dabusb_free_queue (struct list_head *q)
+{
+	struct list_head *tmp;
+	struct list_head *p;
+	pbuff_t b;
+
+	dbg("dabusb_free_queue");
+	for (p = q->next; p != q;) {
+		b = list_entry (p, buff_t, buff_list);
+
+#ifdef DEBUG
+		dump_urb(b->purb);
+#endif
+		kfree(b->purb->transfer_buffer);
+		usb_free_urb(b->purb);
+		tmp = p->next;
+		list_del (p);
+		kfree (b);
+		p = tmp;
+	}
+
+	return 0;
+}
+/*-------------------------------------------------------------------*/
+static int dabusb_free_buffers (pdabusb_t s)
+{
+	unsigned long flags;
+	dbg("dabusb_free_buffers");
+
+	spin_lock_irqsave(&s->lock, flags);
+
+	dabusb_free_queue (&s->free_buff_list);
+	dabusb_free_queue (&s->rec_buff_list);
+
+	spin_unlock_irqrestore(&s->lock, flags);
+
+	s->got_mem = 0;
+	return 0;
+}
+/*-------------------------------------------------------------------*/
+static void dabusb_iso_complete (struct urb *purb, struct pt_regs *regs)
+{
+	pbuff_t b = purb->context;
+	pdabusb_t s = b->s;
+	int i;
+	int len;
+	int dst = 0;
+	void *buf = purb->transfer_buffer;
+
+	dbg("dabusb_iso_complete");
+
+	// process if URB was not killed
+	if (purb->status != -ENOENT) {
+		unsigned int pipe = usb_rcvisocpipe (purb->dev, _DABUSB_ISOPIPE);
+		int pipesize = usb_maxpacket (purb->dev, pipe, usb_pipeout (pipe));
+		for (i = 0; i < purb->number_of_packets; i++)
+			if (!purb->iso_frame_desc[i].status) {
+				len = purb->iso_frame_desc[i].actual_length;
+				if (len <= pipesize) {
+					memcpy (buf + dst, buf + purb->iso_frame_desc[i].offset, len);
+					dst += len;
+				}
+				else
+					err("dabusb_iso_complete: invalid len %d", len);
+			}
+			else
+				warn("dabusb_iso_complete: corrupted packet status: %d", purb->iso_frame_desc[i].status);
+		if (dst != purb->actual_length)
+			err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length);
+	}
+
+	if (atomic_dec_and_test (&s->pending_io) && !s->remove_pending && s->state != _stopped) {
+		s->overruns++;
+		err("overrun (%d)", s->overruns);
+	}
+	wake_up (&s->wait);
+}
+/*-------------------------------------------------------------------*/
+static int dabusb_alloc_buffers (pdabusb_t s)
+{
+	int buffers = 0;
+	pbuff_t b;
+	unsigned int pipe = usb_rcvisocpipe (s->usbdev, _DABUSB_ISOPIPE);
+	int pipesize = usb_maxpacket (s->usbdev, pipe, usb_pipeout (pipe));
+	int packets = _ISOPIPESIZE / pipesize;
+	int transfer_buffer_length = packets * pipesize;
+	int i;
+
+	dbg("dabusb_alloc_buffers pipesize:%d packets:%d transfer_buffer_len:%d",
+		 pipesize, packets, transfer_buffer_length);
+
+	while (buffers < (s->total_buffer_size << 10)) {
+		b = (pbuff_t) kzalloc (sizeof (buff_t), GFP_KERNEL);
+		if (!b) {
+			err("kzalloc(sizeof(buff_t))==NULL");
+			goto err;
+		}
+		b->s = s;
+		b->purb = usb_alloc_urb(packets, GFP_KERNEL);
+		if (!b->purb) {
+			err("usb_alloc_urb == NULL");
+			kfree (b);
+			goto err;
+		}
+
+		b->purb->transfer_buffer = kmalloc (transfer_buffer_length, GFP_KERNEL);
+		if (!b->purb->transfer_buffer) {
+			kfree (b->purb);
+			kfree (b);
+			err("kmalloc(%d)==NULL", transfer_buffer_length);
+			goto err;
+		}
+
+		b->purb->transfer_buffer_length = transfer_buffer_length;
+		b->purb->number_of_packets = packets;
+		b->purb->complete = dabusb_iso_complete;
+		b->purb->context = b;
+		b->purb->dev = s->usbdev;
+		b->purb->pipe = pipe;
+		b->purb->transfer_flags = URB_ISO_ASAP;
+
+		for (i = 0; i < packets; i++) {
+			b->purb->iso_frame_desc[i].offset = i * pipesize;
+			b->purb->iso_frame_desc[i].length = pipesize;
+		}
+
+		buffers += transfer_buffer_length;
+		list_add_tail (&b->buff_list, &s->free_buff_list);
+	}
+	s->got_mem = buffers;
+
+	return 0;
+
+	err:
+	dabusb_free_buffers (s);
+	return -ENOMEM;
+}
+/*-------------------------------------------------------------------*/
+static int dabusb_bulk (pdabusb_t s, pbulk_transfer_t pb)
+{
+	int ret;
+	unsigned int pipe;
+	int actual_length;
+
+	dbg("dabusb_bulk");
+
+	if (!pb->pipe)
+		pipe = usb_rcvbulkpipe (s->usbdev, 2);
+	else
+		pipe = usb_sndbulkpipe (s->usbdev, 2);
+
+	ret=usb_bulk_msg(s->usbdev, pipe, pb->data, pb->size, &actual_length, 100);
+	if(ret<0) {
+		err("dabusb: usb_bulk_msg failed(%d)",ret);
+
+		if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) {
+			err("set_interface failed");
+			return -EINVAL;
+		}
+
+	}
+
+	if( ret == -EPIPE ) {
+		warn("CLEAR_FEATURE request to remove STALL condition.");
+		if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe)))
+			err("request failed");
+	}
+
+	pb->size = actual_length;
+	return ret;
+}
+/* --------------------------------------------------------------------- */
+static int dabusb_writemem (pdabusb_t s, int pos, unsigned char *data, int len)
+{
+	int ret;
+	unsigned char *transfer_buffer =  kmalloc (len, GFP_KERNEL);
+
+	if (!transfer_buffer) {
+		err("dabusb_writemem: kmalloc(%d) failed.", len);
+		return -ENOMEM;
+	}
+
+	memcpy (transfer_buffer, data, len);
+
+	ret=usb_control_msg(s->usbdev, usb_sndctrlpipe( s->usbdev, 0 ), 0xa0, 0x40, pos, 0, transfer_buffer, len, 300);
+
+	kfree (transfer_buffer);
+	return ret;
+}
+/* --------------------------------------------------------------------- */
+static int dabusb_8051_reset (pdabusb_t s, unsigned char reset_bit)
+{
+	dbg("dabusb_8051_reset: %d",reset_bit);
+	return dabusb_writemem (s, CPUCS_REG, &reset_bit, 1);
+}
+/* --------------------------------------------------------------------- */
+static int dabusb_loadmem (pdabusb_t s, const char *fname)
+{
+	int ret;
+	PINTEL_HEX_RECORD ptr = firmware;
+
+	dbg("Enter dabusb_loadmem (internal)");
+
+	ret = dabusb_8051_reset (s, 1);
+	while (ptr->Type == 0) {
+
+		dbg("dabusb_writemem: %04X %p %d)", ptr->Address, ptr->Data, ptr->Length);
+
+		ret = dabusb_writemem (s, ptr->Address, ptr->Data, ptr->Length);
+		if (ret < 0) {
+			err("dabusb_writemem failed (%d %04X %p %d)", ret, ptr->Address, ptr->Data, ptr->Length);
+			break;
+		}
+		ptr++;
+	}
+	ret = dabusb_8051_reset (s, 0);
+
+	dbg("dabusb_loadmem: exit");
+
+	return ret;
+}
+/* --------------------------------------------------------------------- */
+static int dabusb_fpga_clear (pdabusb_t s, pbulk_transfer_t b)
+{
+	b->size = 4;
+	b->data[0] = 0x2a;
+	b->data[1] = 0;
+	b->data[2] = 0;
+	b->data[3] = 0;
+
+	dbg("dabusb_fpga_clear");
+
+	return dabusb_bulk (s, b);
+}
+/* --------------------------------------------------------------------- */
+static int dabusb_fpga_init (pdabusb_t s, pbulk_transfer_t b)
+{
+	b->size = 4;
+	b->data[0] = 0x2c;
+	b->data[1] = 0;
+	b->data[2] = 0;
+	b->data[3] = 0;
+
+	dbg("dabusb_fpga_init");
+
+	return dabusb_bulk (s, b);
+}
+/* --------------------------------------------------------------------- */
+static int dabusb_fpga_download (pdabusb_t s, const char *fname)
+{
+	pbulk_transfer_t b = kmalloc (sizeof (bulk_transfer_t), GFP_KERNEL);
+	unsigned int blen, n;
+	int ret;
+	unsigned char *buf = bitstream;
+
+	dbg("Enter dabusb_fpga_download (internal)");
+
+	if (!b) {
+		err("kmalloc(sizeof(bulk_transfer_t))==NULL");
+		return -ENOMEM;
+	}
+
+	b->pipe = 1;
+	ret = dabusb_fpga_clear (s, b);
+	mdelay (10);
+	blen = buf[73] + (buf[72] << 8);
+
+	dbg("Bitstream len: %i", blen);
+
+	b->data[0] = 0x2b;
+	b->data[1] = 0;
+	b->data[2] = 0;
+	b->data[3] = 60;
+
+	for (n = 0; n <= blen + 60; n += 60) {
+		// some cclks for startup
+		b->size = 64;
+		memcpy (b->data + 4, buf + 74 + n, 60);
+		ret = dabusb_bulk (s, b);
+		if (ret < 0) {
+			err("dabusb_bulk failed.");
+			break;
+		}
+		mdelay (1);
+	}
+
+	ret = dabusb_fpga_init (s, b);
+	kfree (b);
+
+	dbg("exit dabusb_fpga_download");
+
+	return ret;
+}
+
+static int dabusb_stop (pdabusb_t s)
+{
+	dbg("dabusb_stop");
+
+	s->state = _stopped;
+	dabusb_cancel_queue (s, &s->rec_buff_list);
+
+	dbg("pending_io: %d", s->pending_io.counter);
+
+	s->pending_io.counter = 0;
+	return 0;
+}
+
+static int dabusb_startrek (pdabusb_t s)
+{
+	if (!s->got_mem && s->state != _started) {
+
+		dbg("dabusb_startrek");
+
+		if (dabusb_alloc_buffers (s) < 0)
+			return -ENOMEM;
+		dabusb_stop (s);
+		s->state = _started;
+		s->readptr = 0;
+	}
+
+	if (!list_empty (&s->free_buff_list)) {
+		pbuff_t end;
+		int ret;
+
+	while (!dabusb_add_buf_tail (s, &s->rec_buff_list, &s->free_buff_list)) {
+
+			dbg("submitting: end:%p s->rec_buff_list:%p", s->rec_buff_list.prev, &s->rec_buff_list);
+
+			end = list_entry (s->rec_buff_list.prev, buff_t, buff_list);
+
+			ret = usb_submit_urb (end->purb, GFP_KERNEL);
+			if (ret) {
+				err("usb_submit_urb returned:%d", ret);
+				if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list))
+					err("startrek: dabusb_add_buf_tail failed");
+				break;
+			}
+			else
+				atomic_inc (&s->pending_io);
+		}
+		dbg("pending_io: %d",s->pending_io.counter);
+	}
+
+	return 0;
+}
+
+static ssize_t dabusb_read (struct file *file, char __user *buf, size_t count, loff_t * ppos)
+{
+	pdabusb_t s = (pdabusb_t) file->private_data;
+	unsigned long flags;
+	unsigned ret = 0;
+	int rem;
+	int cnt;
+	pbuff_t b;
+	struct urb *purb = NULL;
+
+	dbg("dabusb_read");
+
+	if (*ppos)
+		return -ESPIPE;
+
+	if (s->remove_pending)
+		return -EIO;
+
+
+	if (!s->usbdev)
+		return -EIO;
+
+	while (count > 0) {
+		dabusb_startrek (s);
+
+		spin_lock_irqsave (&s->lock, flags);
+
+		if (list_empty (&s->rec_buff_list)) {
+
+			spin_unlock_irqrestore(&s->lock, flags);
+
+			err("error: rec_buf_list is empty");
+			goto err;
+		}
+
+		b = list_entry (s->rec_buff_list.next, buff_t, buff_list);
+		purb = b->purb;
+
+		spin_unlock_irqrestore(&s->lock, flags);
+
+		if (purb->status == -EINPROGRESS) {
+			if (file->f_flags & O_NONBLOCK)		// return nonblocking
+			 {
+				if (!ret)
+					ret = -EAGAIN;
+				goto err;
+			}
+
+			interruptible_sleep_on (&s->wait);
+
+			if (signal_pending (current)) {
+				if (!ret)
+					ret = -ERESTARTSYS;
+				goto err;
+			}
+
+			spin_lock_irqsave (&s->lock, flags);
+
+			if (list_empty (&s->rec_buff_list)) {
+				spin_unlock_irqrestore(&s->lock, flags);
+				err("error: still no buffer available.");
+				goto err;
+			}
+			spin_unlock_irqrestore(&s->lock, flags);
+			s->readptr = 0;
+		}
+		if (s->remove_pending) {
+			ret = -EIO;
+			goto err;
+		}
+
+		rem = purb->actual_length - s->readptr;		// set remaining bytes to copy
+
+		if (count >= rem)
+			cnt = rem;
+		else
+			cnt = count;
+
+		dbg("copy_to_user:%p %p %d",buf, purb->transfer_buffer + s->readptr, cnt);
+
+		if (copy_to_user (buf, purb->transfer_buffer + s->readptr, cnt)) {
+			err("read: copy_to_user failed");
+			if (!ret)
+				ret = -EFAULT;
+			goto err;
+		}
+
+		s->readptr += cnt;
+		count -= cnt;
+		buf += cnt;
+		ret += cnt;
+
+		if (s->readptr == purb->actual_length) {
+			// finished, take next buffer
+			if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list))
+				err("read: dabusb_add_buf_tail failed");
+			s->readptr = 0;
+		}
+	}
+      err:			//mutex_unlock(&s->mutex);
+	return ret;
+}
+
+static int dabusb_open (struct inode *inode, struct file *file)
+{
+	int devnum = iminor(inode);
+	pdabusb_t s;
+
+	if (devnum < DABUSB_MINOR || devnum >= (DABUSB_MINOR + NRDABUSB))
+		return -EIO;
+
+	s = &dabusb[devnum - DABUSB_MINOR];
+
+	dbg("dabusb_open");
+	mutex_lock(&s->mutex);
+
+	while (!s->usbdev || s->opened) {
+		mutex_unlock(&s->mutex);
+
+		if (file->f_flags & O_NONBLOCK) {
+			return -EBUSY;
+		}
+		msleep_interruptible(500);
+
+		if (signal_pending (current)) {
+			return -EAGAIN;
+		}
+		mutex_lock(&s->mutex);
+	}
+	if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) {
+		mutex_unlock(&s->mutex);
+		err("set_interface failed");
+		return -EINVAL;
+	}
+	s->opened = 1;
+	mutex_unlock(&s->mutex);
+
+	file->f_pos = 0;
+	file->private_data = s;
+
+	return nonseekable_open(inode, file);
+}
+
+static int dabusb_release (struct inode *inode, struct file *file)
+{
+	pdabusb_t s = (pdabusb_t) file->private_data;
+
+	dbg("dabusb_release");
+
+	mutex_lock(&s->mutex);
+	dabusb_stop (s);
+	dabusb_free_buffers (s);
+	mutex_unlock(&s->mutex);
+
+	if (!s->remove_pending) {
+		if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0)
+			err("set_interface failed");
+	}
+	else
+		wake_up (&s->remove_ok);
+
+	s->opened = 0;
+	return 0;
+}
+
+static int dabusb_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	pdabusb_t s = (pdabusb_t) file->private_data;
+	pbulk_transfer_t pbulk;
+	int ret = 0;
+	int version = DABUSB_VERSION;
+
+	dbg("dabusb_ioctl");
+
+	if (s->remove_pending)
+		return -EIO;
+
+	mutex_lock(&s->mutex);
+
+	if (!s->usbdev) {
+		mutex_unlock(&s->mutex);
+		return -EIO;
+	}
+
+	switch (cmd) {
+
+	case IOCTL_DAB_BULK:
+		pbulk = (pbulk_transfer_t) kmalloc (sizeof (bulk_transfer_t), GFP_KERNEL);
+
+		if (!pbulk) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		if (copy_from_user (pbulk, (void __user *) arg, sizeof (bulk_transfer_t))) {
+			ret = -EFAULT;
+			kfree (pbulk);
+			break;
+		}
+
+		ret=dabusb_bulk (s, pbulk);
+		if(ret==0)
+			if (copy_to_user((void __user *)arg, pbulk,
+					 sizeof(bulk_transfer_t)))
+				ret = -EFAULT;
+		kfree (pbulk);
+		break;
+
+	case IOCTL_DAB_OVERRUNS:
+		ret = put_user (s->overruns, (unsigned int __user *) arg);
+		break;
+
+	case IOCTL_DAB_VERSION:
+		ret = put_user (version, (unsigned int __user *) arg);
+		break;
+
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	mutex_unlock(&s->mutex);
+	return ret;
+}
+
+static struct file_operations dabusb_fops =
+{
+	.owner =	THIS_MODULE,
+	.llseek =	no_llseek,
+	.read =		dabusb_read,
+	.ioctl =	dabusb_ioctl,
+	.open =		dabusb_open,
+	.release =	dabusb_release,
+};
+
+static struct usb_class_driver dabusb_class = {
+	.name =		"dabusb%d",
+	.fops =		&dabusb_fops,
+	.minor_base =	DABUSB_MINOR,
+};
+
+
+/* --------------------------------------------------------------------- */
+static int dabusb_probe (struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	int retval;
+	pdabusb_t s;
+
+	dbg("dabusb: probe: vendor id 0x%x, device id 0x%x ifnum:%d",
+	    le16_to_cpu(usbdev->descriptor.idVendor),
+	    le16_to_cpu(usbdev->descriptor.idProduct),
+	    intf->altsetting->desc.bInterfaceNumber);
+
+	/* We don't handle multiple configurations */
+	if (usbdev->descriptor.bNumConfigurations != 1)
+		return -ENODEV;
+
+	if (intf->altsetting->desc.bInterfaceNumber != _DABUSB_IF &&
+	    le16_to_cpu(usbdev->descriptor.idProduct) == 0x9999)
+		return -ENODEV;
+
+
+
+	s = &dabusb[intf->minor];
+
+	mutex_lock(&s->mutex);
+	s->remove_pending = 0;
+	s->usbdev = usbdev;
+	s->devnum = intf->minor;
+
+	if (usb_reset_configuration (usbdev) < 0) {
+		err("reset_configuration failed");
+		goto reject;
+	}
+	if (le16_to_cpu(usbdev->descriptor.idProduct) == 0x2131) {
+		dabusb_loadmem (s, NULL);
+		goto reject;
+	}
+	else {
+		dabusb_fpga_download (s, NULL);
+
+		if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0) {
+			err("set_interface failed");
+			goto reject;
+		}
+	}
+	dbg("bound to interface: %d", intf->altsetting->desc.bInterfaceNumber);
+	usb_set_intfdata (intf, s);
+	mutex_unlock(&s->mutex);
+
+	retval = usb_register_dev(intf, &dabusb_class);
+	if (retval) {
+		usb_set_intfdata (intf, NULL);
+		return -ENOMEM;
+	}
+
+	return 0;
+
+      reject:
+	mutex_unlock(&s->mutex);
+	s->usbdev = NULL;
+	return -ENODEV;
+}
+
+static void dabusb_disconnect (struct usb_interface *intf)
+{
+	wait_queue_t __wait;
+	pdabusb_t s = usb_get_intfdata (intf);
+
+	dbg("dabusb_disconnect");
+
+	init_waitqueue_entry(&__wait, current);
+
+	usb_set_intfdata (intf, NULL);
+	if (s) {
+		usb_deregister_dev (intf, &dabusb_class);
+		s->remove_pending = 1;
+		wake_up (&s->wait);
+		add_wait_queue(&s->remove_ok, &__wait);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		if (s->state == _started)
+			schedule();
+		current->state = TASK_RUNNING;
+		remove_wait_queue(&s->remove_ok, &__wait);
+
+		s->usbdev = NULL;
+		s->overruns = 0;
+	}
+}
+
+static struct usb_device_id dabusb_ids [] = {
+	// { USB_DEVICE(0x0547, 0x2131) },	/* An2131 chip, no boot ROM */
+	{ USB_DEVICE(0x0547, 0x9999) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, dabusb_ids);
+
+static struct usb_driver dabusb_driver = {
+	.name =		"dabusb",
+	.probe =	dabusb_probe,
+	.disconnect =	dabusb_disconnect,
+	.id_table =	dabusb_ids,
+};
+
+/* --------------------------------------------------------------------- */
+
+static int __init dabusb_init (void)
+{
+	int retval;
+	unsigned u;
+
+	/* initialize struct */
+	for (u = 0; u < NRDABUSB; u++) {
+		pdabusb_t s = &dabusb[u];
+		memset (s, 0, sizeof (dabusb_t));
+		mutex_init (&s->mutex);
+		s->usbdev = NULL;
+		s->total_buffer_size = buffers;
+		init_waitqueue_head (&s->wait);
+		init_waitqueue_head (&s->remove_ok);
+		spin_lock_init (&s->lock);
+		INIT_LIST_HEAD (&s->free_buff_list);
+		INIT_LIST_HEAD (&s->rec_buff_list);
+	}
+
+	/* register misc device */
+	retval = usb_register(&dabusb_driver);
+	if (retval)
+		goto out;
+
+	dbg("dabusb_init: driver registered");
+
+	info(DRIVER_VERSION ":" DRIVER_DESC);
+
+out:
+	return retval;
+}
+
+static void __exit dabusb_cleanup (void)
+{
+	dbg("dabusb_cleanup");
+
+	usb_deregister (&dabusb_driver);
+}
+
+/* --------------------------------------------------------------------- */
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE("GPL");
+
+module_param(buffers, int, 0);
+MODULE_PARM_DESC (buffers, "Number of buffers (default=256)");
+
+module_init (dabusb_init);
+module_exit (dabusb_cleanup);
+
+/* --------------------------------------------------------------------- */
diff --git a/drivers/media/video/dabusb.h b/drivers/media/video/dabusb.h
new file mode 100644
index 000000000000..00eb34c863eb
--- /dev/null
+++ b/drivers/media/video/dabusb.h
@@ -0,0 +1,85 @@
+#define _BULK_DATA_LEN 64
+typedef struct
+{
+	unsigned char data[_BULK_DATA_LEN];
+	unsigned int size;
+	unsigned int pipe;
+}bulk_transfer_t,*pbulk_transfer_t;
+
+#define DABUSB_MINOR 240		/* some unassigned USB minor */
+#define DABUSB_VERSION 0x1000
+#define IOCTL_DAB_BULK              _IOWR('d', 0x30, bulk_transfer_t)
+#define IOCTL_DAB_OVERRUNS	    _IOR('d',  0x15, int)
+#define IOCTL_DAB_VERSION           _IOR('d', 0x3f, int)
+
+#ifdef __KERNEL__
+
+typedef enum { _stopped=0, _started } driver_state_t;
+
+typedef struct
+{
+	struct mutex mutex;
+	struct usb_device *usbdev;
+	wait_queue_head_t wait;
+	wait_queue_head_t remove_ok;
+	spinlock_t lock;
+	atomic_t pending_io;
+	driver_state_t state;
+	int remove_pending;
+	int got_mem;
+	int total_buffer_size;
+	unsigned int overruns;
+	int readptr;
+	int opened;
+	int devnum;
+	struct list_head free_buff_list;
+	struct list_head rec_buff_list;
+} dabusb_t,*pdabusb_t;
+
+typedef struct
+{
+	pdabusb_t s;
+	struct urb *purb;
+	struct list_head buff_list;
+} buff_t,*pbuff_t;
+
+typedef struct
+{
+	wait_queue_head_t wait;
+} bulk_completion_context_t, *pbulk_completion_context_t;
+
+
+#define _DABUSB_IF 2
+#define _DABUSB_ISOPIPE 0x09
+#define _ISOPIPESIZE	16384
+
+#define _BULK_DATA_LEN 64
+// Vendor specific request code for Anchor Upload/Download
+// This one is implemented in the core
+#define ANCHOR_LOAD_INTERNAL  0xA0
+
+// EZ-USB Control and Status Register.  Bit 0 controls 8051 reset
+#define CPUCS_REG    0x7F92
+#define _TOTAL_BUFFERS 384
+
+#define MAX_INTEL_HEX_RECORD_LENGTH 16
+
+#ifndef _BYTE_DEFINED
+#define _BYTE_DEFINED
+typedef unsigned char BYTE;
+#endif // !_BYTE_DEFINED
+
+#ifndef _WORD_DEFINED
+#define _WORD_DEFINED
+typedef unsigned short WORD;
+#endif // !_WORD_DEFINED
+
+typedef struct _INTEL_HEX_RECORD
+{
+   BYTE  Length;
+   WORD  Address;
+   BYTE  Type;
+   BYTE  Data[MAX_INTEL_HEX_RECORD_LENGTH];
+} INTEL_HEX_RECORD, *PINTEL_HEX_RECORD;
+
+#endif
diff --git a/drivers/media/video/dsbr100.c b/drivers/media/video/dsbr100.c
new file mode 100644
index 000000000000..3b4e9985c3d7
--- /dev/null
+++ b/drivers/media/video/dsbr100.c
@@ -0,0 +1,429 @@
+/* A driver for the D-Link DSB-R100 USB radio.  The R100 plugs
+ into both the USB and an analog audio input, so this thing
+ only deals with initialisation and frequency setting, the
+ audio data has to be handled by a sound driver.
+
+ Major issue: I can't find out where the device reports the signal
+ strength, and indeed the windows software appearantly just looks
+ at the stereo indicator as well.  So, scanning will only find
+ stereo stations.  Sad, but I can't help it.
+
+ Also, the windows program sends oodles of messages over to the
+ device, and I couldn't figure out their meaning.  My suspicion
+ is that they don't have any:-)
+
+ You might find some interesting stuff about this module at
+ http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr
+
+ Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ History:
+
+ Version 0.40:
+  Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing
+
+ Version 0.30:
+	Markus: Updates for 2.5.x kernel and more ISO compliant source
+
+ Version 0.25:
+	PSL and Markus: Cleanup, radio now doesn't stop on device close
+
+ Version 0.24:
+	Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally
+	right.  Some minor cleanup, improved standalone compilation
+
+ Version 0.23:
+	Markus: Sign extension bug fixed by declaring transfer_buffer unsigned
+
+ Version 0.22:
+	Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns,
+	thanks to Mike Cox for pointing the problem out.
+
+ Version 0.21:
+	Markus: Minor cleanup, warnings if something goes wrong, lame attempt
+	to adhere to Documentation/CodingStyle
+
+ Version 0.2:
+	Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module
+	Markus: Copyright clarification
+
+ Version 0.01: Markus: initial release
+
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/videodev.h>
+#include <linux/usb.h>
+#include <linux/smp_lock.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.40"
+#define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
+#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
+
+#define DSB100_VENDOR 0x04b4
+#define DSB100_PRODUCT 0x1002
+
+/* Commands the device appears to understand */
+#define DSB100_TUNE 1
+#define DSB100_ONOFF 2
+
+#define TB_LEN 16
+
+/* Frequency limits in MHz -- these are European values.  For Japanese
+devices, that would be 76 and 91.  */
+#define FREQ_MIN  87.5
+#define FREQ_MAX 108.0
+#define FREQ_MUL 16000
+
+
+static int usb_dsbr100_probe(struct usb_interface *intf,
+			     const struct usb_device_id *id);
+static void usb_dsbr100_disconnect(struct usb_interface *intf);
+static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
+			     unsigned int cmd, unsigned long arg);
+static int usb_dsbr100_open(struct inode *inode, struct file *file);
+static int usb_dsbr100_close(struct inode *inode, struct file *file);
+
+static int radio_nr = -1;
+module_param(radio_nr, int, 0);
+
+/* Data for one (physical) device */
+typedef struct {
+	struct usb_device *usbdev;
+	struct video_device *videodev;
+	unsigned char transfer_buffer[TB_LEN];
+	int curfreq;
+	int stereo;
+	int users;
+	int removed;
+} dsbr100_device;
+
+
+/* File system interface */
+static struct file_operations usb_dsbr100_fops = {
+	.owner =	THIS_MODULE,
+	.open =		usb_dsbr100_open,
+	.release =     	usb_dsbr100_close,
+	.ioctl =        usb_dsbr100_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.llseek =       no_llseek,
+};
+
+/* V4L interface */
+static struct video_device dsbr100_videodev_template=
+{
+	.owner =	THIS_MODULE,
+	.name =		"D-Link DSB-R 100",
+	.type =		VID_TYPE_TUNER,
+	.hardware =	VID_HARDWARE_AZTECH,
+	.fops =         &usb_dsbr100_fops,
+	.release = video_device_release,
+};
+
+static struct usb_device_id usb_dsbr100_device_table [] = {
+	{ USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table);
+
+/* USB subsystem interface */
+static struct usb_driver usb_dsbr100_driver = {
+	.name =		"dsbr100",
+	.probe =	usb_dsbr100_probe,
+	.disconnect =	usb_dsbr100_disconnect,
+	.id_table =	usb_dsbr100_device_table,
+};
+
+/* Low-level device interface begins here */
+
+/* switch on radio */
+static int dsbr100_start(dsbr100_device *radio)
+{
+	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+			USB_REQ_GET_STATUS,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 ||
+	usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+			DSB100_ONOFF,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			0x01, 0x00, radio->transfer_buffer, 8, 300)<0)
+		return -1;
+	return (radio->transfer_buffer)[0];
+}
+
+
+/* switch off radio */
+static int dsbr100_stop(dsbr100_device *radio)
+{
+	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+			USB_REQ_GET_STATUS,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 ||
+	usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+			DSB100_ONOFF,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			0x00, 0x00, radio->transfer_buffer, 8, 300)<0)
+		return -1;
+	return (radio->transfer_buffer)[0];
+}
+
+/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
+static int dsbr100_setfreq(dsbr100_device *radio, int freq)
+{
+	freq = (freq/16*80)/1000+856;
+	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+			DSB100_TUNE,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			(freq>>8)&0x00ff, freq&0xff,
+			radio->transfer_buffer, 8, 300)<0 ||
+	   usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+			USB_REQ_GET_STATUS,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 ||
+	usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+			USB_REQ_GET_STATUS,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE |  USB_DIR_IN,
+			0x00, 0x24, radio->transfer_buffer, 8, 300)<0) {
+		radio->stereo = -1;
+		return -1;
+	}
+	radio->stereo = ! ((radio->transfer_buffer)[0]&0x01);
+	return (radio->transfer_buffer)[0];
+}
+
+/* return the device status.  This is, in effect, just whether it
+sees a stereo signal or not.  Pity. */
+static void dsbr100_getstat(dsbr100_device *radio)
+{
+	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+		USB_REQ_GET_STATUS,
+		USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+		0x00 , 0x24, radio->transfer_buffer, 8, 300)<0)
+		radio->stereo = -1;
+	else
+		radio->stereo = ! (radio->transfer_buffer[0]&0x01);
+}
+
+
+/* USB subsystem interface begins here */
+
+/* check if the device is present and register with v4l and
+usb if it is */
+static int usb_dsbr100_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	dsbr100_device *radio;
+
+	if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL)))
+		return -ENOMEM;
+	if (!(radio->videodev = video_device_alloc())) {
+		kfree(radio);
+		return -ENOMEM;
+	}
+	memcpy(radio->videodev, &dsbr100_videodev_template,
+		sizeof(dsbr100_videodev_template));
+	radio->removed = 0;
+	radio->users = 0;
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->curfreq = FREQ_MIN*FREQ_MUL;
+	video_set_drvdata(radio->videodev, radio);
+	if (video_register_device(radio->videodev, VFL_TYPE_RADIO,
+		radio_nr)) {
+		warn("Could not register video device");
+		video_device_release(radio->videodev);
+		kfree(radio);
+		return -EIO;
+	}
+	usb_set_intfdata(intf, radio);
+	return 0;
+}
+
+/* handle unplugging of the device, release data structures
+if nothing keeps us from doing it.  If something is still
+keeping us busy, the release callback of v4l will take care
+of releasing it.  stv680.c does not relase its private
+data, so I don't do this here either.  Checking out the
+code I'd expect I better did that, but if there's a memory
+leak here it's tiny (~50 bytes per disconnect) */
+static void usb_dsbr100_disconnect(struct usb_interface *intf)
+{
+	dsbr100_device *radio = usb_get_intfdata(intf);
+
+	usb_set_intfdata (intf, NULL);
+	if (radio) {
+		video_unregister_device(radio->videodev);
+		radio->videodev = NULL;
+		if (radio->users) {
+			kfree(radio);
+		} else {
+			radio->removed = 1;
+		}
+	}
+}
+
+
+/* Video for Linux interface */
+
+static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file,
+				unsigned int cmd, void *arg)
+{
+	dsbr100_device *radio=video_get_drvdata(video_devdata(file));
+
+	if (!radio)
+		return -EIO;
+
+	switch(cmd) {
+		case VIDIOCGCAP: {
+			struct video_capability *v = arg;
+
+			memset(v, 0, sizeof(*v));
+			v->type = VID_TYPE_TUNER;
+			v->channels = 1;
+			v->audios = 1;
+			strcpy(v->name, "D-Link R-100 USB FM Radio");
+			return 0;
+		}
+		case VIDIOCGTUNER: {
+			struct video_tuner *v = arg;
+
+			dsbr100_getstat(radio);
+			if(v->tuner)	/* Only 1 tuner */
+				return -EINVAL;
+			v->rangelow = FREQ_MIN*FREQ_MUL;
+			v->rangehigh = FREQ_MAX*FREQ_MUL;
+			v->flags = VIDEO_TUNER_LOW;
+			v->mode = VIDEO_MODE_AUTO;
+			v->signal = radio->stereo*0x7000;
+				/* Don't know how to get signal strength */
+			v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo;
+			strcpy(v->name, "DSB R-100");
+			return 0;
+		}
+		case VIDIOCSTUNER: {
+			struct video_tuner *v = arg;
+
+			if(v->tuner!=0)
+				return -EINVAL;
+			/* Only 1 tuner so no setting needed ! */
+			return 0;
+		}
+		case VIDIOCGFREQ: {
+			int *freq = arg;
+
+			if (radio->curfreq==-1)
+				return -EINVAL;
+			*freq = radio->curfreq;
+			return 0;
+		}
+		case VIDIOCSFREQ: {
+			int *freq = arg;
+
+			radio->curfreq = *freq;
+			if (dsbr100_setfreq(radio, radio->curfreq)==-1)
+				warn("Set frequency failed");
+			return 0;
+		}
+		case VIDIOCGAUDIO: {
+			struct video_audio *v = arg;
+
+			memset(v, 0, sizeof(*v));
+			v->flags |= VIDEO_AUDIO_MUTABLE;
+			v->mode = VIDEO_SOUND_STEREO;
+			v->volume = 1;
+			v->step = 1;
+			strcpy(v->name, "Radio");
+			return 0;
+		}
+		case VIDIOCSAUDIO: {
+			struct video_audio *v = arg;
+
+			if (v->audio)
+				return -EINVAL;
+			if (v->flags&VIDEO_AUDIO_MUTE) {
+				if (dsbr100_stop(radio)==-1)
+					warn("Radio did not respond properly");
+			}
+			else
+				if (dsbr100_start(radio)==-1)
+					warn("Radio did not respond properly");
+			return 0;
+		}
+		default:
+			return -ENOIOCTLCMD;
+	}
+}
+
+static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
+			     unsigned int cmd, unsigned long arg)
+{
+	return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl);
+}
+
+static int usb_dsbr100_open(struct inode *inode, struct file *file)
+{
+	dsbr100_device *radio=video_get_drvdata(video_devdata(file));
+
+	radio->users = 1;
+	if (dsbr100_start(radio)<0) {
+		warn("Radio did not start up properly");
+		radio->users = 0;
+		return -EIO;
+	}
+	dsbr100_setfreq(radio, radio->curfreq);
+	return 0;
+}
+
+static int usb_dsbr100_close(struct inode *inode, struct file *file)
+{
+	dsbr100_device *radio=video_get_drvdata(video_devdata(file));
+
+	if (!radio)
+		return -ENODEV;
+	radio->users = 0;
+	if (radio->removed) {
+		kfree(radio);
+	}
+	return 0;
+}
+
+static int __init dsbr100_init(void)
+{
+	int retval = usb_register(&usb_dsbr100_driver);
+	info(DRIVER_VERSION ":" DRIVER_DESC);
+	return retval;
+}
+
+static void __exit dsbr100_exit(void)
+{
+	usb_deregister(&usb_dsbr100_driver);
+}
+
+module_init (dsbr100_init);
+module_exit (dsbr100_exit);
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 4e22fc4889e1..f62fd706b45a 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -28,10 +28,10 @@
 #include <linux/i2c.h>
 #include <linux/usb.h>
 #include <media/tuner.h>
-#include <media/audiochip.h>
+#include <media/msp3400.h>
 #include <media/tveeprom.h>
+#include <media/audiochip.h>
 #include <media/v4l2-common.h>
-#include "msp3400.h"
 
 #include "em28xx.h"
 
@@ -147,11 +147,12 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = {{
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = 0,
-			.amux     = 6,
+			.amux     = MSP_INPUT_DEFAULT,
 		},{
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = 2,
-			.amux     = 1,
+			.amux     = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1,
+					MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART),
 		}},
 	},
 	[EM2820_BOARD_MSI_VOX_USB_2] = {
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 780342f7b239..dfba33d0fa61 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -38,6 +38,7 @@
 #include "em28xx.h"
 #include <media/tuner.h>
 #include <media/v4l2-common.h>
+#include <media/msp3400.h>
 
 #define DRIVER_AUTHOR "Ludovico Cavedon <cavedon@sssup.it>, " \
 		      "Markus Rechberger <mrechberger@gmail.com>, " \
@@ -216,9 +217,14 @@ static void video_mux(struct em28xx *dev, int index)
 	em28xx_videodbg("Setting input index=%d, vmux=%d, amux=%d\n",index,input,dev->ctl_ainput);
 
 	if (dev->has_msp34xx) {
+		struct v4l2_routing route;
+
 		if (dev->i2s_speed)
 			em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, &dev->i2s_speed);
-		em28xx_i2c_call_clients(dev, VIDIOC_S_AUDIO, &dev->ctl_ainput);
+		route.input = dev->ctl_ainput;
+		route.output = MSP_OUTPUT(MSP_OUT_SCART1_DA);
+		/* Note: this is msp3400 specific */
+		em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route);
 		ainput = EM28XX_AUDIO_SRC_TUNER;
 		em28xx_audio_source(dev, ainput);
 	} else {
diff --git a/drivers/media/video/et61x251/Makefile b/drivers/media/video/et61x251/Makefile
new file mode 100644
index 000000000000..2ff4db9ec882
--- /dev/null
+++ b/drivers/media/video/et61x251/Makefile
@@ -0,0 +1,4 @@
+et61x251-objs   := et61x251_core.o et61x251_tas5130d1b.o
+
+obj-$(CONFIG_USB_ET61X251)      += et61x251.o
+
diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h
new file mode 100644
index 000000000000..2e5ca4032489
--- /dev/null
+++ b/drivers/media/video/et61x251/et61x251.h
@@ -0,0 +1,234 @@
+/***************************************************************************
+ * V4L2 driver for ET61X[12]51 PC Camera Controllers                       *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _ET61X251_H_
+#define _ET61X251_H_
+
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <linux/param.h>
+#include <linux/rwsem.h>
+#include <linux/mutex.h>
+#include <linux/stddef.h>
+#include <linux/string.h>
+
+#include "et61x251_sensor.h"
+
+/*****************************************************************************/
+
+#define ET61X251_DEBUG
+#define ET61X251_DEBUG_LEVEL         2
+#define ET61X251_MAX_DEVICES         64
+#define ET61X251_PRESERVE_IMGSCALE   0
+#define ET61X251_FORCE_MUNMAP        0
+#define ET61X251_MAX_FRAMES          32
+#define ET61X251_COMPRESSION_QUALITY 0
+#define ET61X251_URBS                2
+#define ET61X251_ISO_PACKETS         7
+#define ET61X251_ALTERNATE_SETTING   13
+#define ET61X251_URB_TIMEOUT         msecs_to_jiffies(2 * ET61X251_ISO_PACKETS)
+#define ET61X251_CTRL_TIMEOUT        100
+#define ET61X251_FRAME_TIMEOUT       2
+
+/*****************************************************************************/
+
+static const struct usb_device_id et61x251_id_table[] = {
+	{ USB_DEVICE(0x102c, 0x6151), },
+	{ USB_DEVICE(0x102c, 0x6251), },
+	{ USB_DEVICE(0x102c, 0x6253), },
+	{ USB_DEVICE(0x102c, 0x6254), },
+	{ USB_DEVICE(0x102c, 0x6255), },
+	{ USB_DEVICE(0x102c, 0x6256), },
+	{ USB_DEVICE(0x102c, 0x6257), },
+	{ USB_DEVICE(0x102c, 0x6258), },
+	{ USB_DEVICE(0x102c, 0x6259), },
+	{ USB_DEVICE(0x102c, 0x625a), },
+	{ USB_DEVICE(0x102c, 0x625b), },
+	{ USB_DEVICE(0x102c, 0x625c), },
+	{ USB_DEVICE(0x102c, 0x625d), },
+	{ USB_DEVICE(0x102c, 0x625e), },
+	{ USB_DEVICE(0x102c, 0x625f), },
+	{ USB_DEVICE(0x102c, 0x6260), },
+	{ USB_DEVICE(0x102c, 0x6261), },
+	{ USB_DEVICE(0x102c, 0x6262), },
+	{ USB_DEVICE(0x102c, 0x6263), },
+	{ USB_DEVICE(0x102c, 0x6264), },
+	{ USB_DEVICE(0x102c, 0x6265), },
+	{ USB_DEVICE(0x102c, 0x6266), },
+	{ USB_DEVICE(0x102c, 0x6267), },
+	{ USB_DEVICE(0x102c, 0x6268), },
+	{ USB_DEVICE(0x102c, 0x6269), },
+	{ }
+};
+
+ET61X251_SENSOR_TABLE
+
+/*****************************************************************************/
+
+enum et61x251_frame_state {
+	F_UNUSED,
+	F_QUEUED,
+	F_GRABBING,
+	F_DONE,
+	F_ERROR,
+};
+
+struct et61x251_frame_t {
+	void* bufmem;
+	struct v4l2_buffer buf;
+	enum et61x251_frame_state state;
+	struct list_head frame;
+	unsigned long vma_use_count;
+};
+
+enum et61x251_dev_state {
+	DEV_INITIALIZED = 0x01,
+	DEV_DISCONNECTED = 0x02,
+	DEV_MISCONFIGURED = 0x04,
+};
+
+enum et61x251_io_method {
+	IO_NONE,
+	IO_READ,
+	IO_MMAP,
+};
+
+enum et61x251_stream_state {
+	STREAM_OFF,
+	STREAM_INTERRUPT,
+	STREAM_ON,
+};
+
+struct et61x251_sysfs_attr {
+	u8 reg, i2c_reg;
+};
+
+struct et61x251_module_param {
+	u8 force_munmap;
+	u16 frame_timeout;
+};
+
+static DEFINE_MUTEX(et61x251_sysfs_lock);
+static DECLARE_RWSEM(et61x251_disconnect);
+
+struct et61x251_device {
+	struct video_device* v4ldev;
+
+	struct et61x251_sensor sensor;
+
+	struct usb_device* usbdev;
+	struct urb* urb[ET61X251_URBS];
+	void* transfer_buffer[ET61X251_URBS];
+	u8* control_buffer;
+
+	struct et61x251_frame_t *frame_current, frame[ET61X251_MAX_FRAMES];
+	struct list_head inqueue, outqueue;
+	u32 frame_count, nbuffers, nreadbuffers;
+
+	enum et61x251_io_method io;
+	enum et61x251_stream_state stream;
+
+	struct v4l2_jpegcompression compression;
+
+	struct et61x251_sysfs_attr sysfs;
+	struct et61x251_module_param module_param;
+
+	enum et61x251_dev_state state;
+	u8 users;
+
+	struct mutex dev_mutex, fileop_mutex;
+	spinlock_t queue_lock;
+	wait_queue_head_t open, wait_frame, wait_stream;
+};
+
+/*****************************************************************************/
+
+struct et61x251_device*
+et61x251_match_id(struct et61x251_device* cam, const struct usb_device_id *id)
+{
+	if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id))
+		return cam;
+
+	return NULL;
+}
+
+
+void
+et61x251_attach_sensor(struct et61x251_device* cam,
+		       struct et61x251_sensor* sensor)
+{
+	memcpy(&cam->sensor, sensor, sizeof(struct et61x251_sensor));
+}
+
+/*****************************************************************************/
+
+#undef DBG
+#undef KDBG
+#ifdef ET61X251_DEBUG
+#	define DBG(level, fmt, args...)                                       \
+do {                                                                          \
+	if (debug >= (level)) {                                               \
+		if ((level) == 1)                                             \
+			dev_err(&cam->usbdev->dev, fmt "\n", ## args);        \
+		else if ((level) == 2)                                        \
+			dev_info(&cam->usbdev->dev, fmt "\n", ## args);       \
+		else if ((level) >= 3)                                        \
+			dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",      \
+				 __FUNCTION__, __LINE__ , ## args);           \
+	}                                                                     \
+} while (0)
+#	define KDBG(level, fmt, args...)                                      \
+do {                                                                          \
+	if (debug >= (level)) {                                               \
+		if ((level) == 1 || (level) == 2)                             \
+			pr_info("et61x251: " fmt "\n", ## args);              \
+		else if ((level) == 3)                                        \
+			pr_debug("et61x251: [%s:%d] " fmt "\n", __FUNCTION__, \
+				 __LINE__ , ## args);                         \
+	}                                                                     \
+} while (0)
+#	define V4LDBG(level, name, cmd)                                       \
+do {                                                                          \
+	if (debug >= (level))                                                 \
+		v4l_print_ioctl(name, cmd);                                   \
+} while (0)
+#else
+#	define DBG(level, fmt, args...) do {;} while(0)
+#	define KDBG(level, fmt, args...) do {;} while(0)
+#	define V4LDBG(level, name, cmd) do {;} while(0)
+#endif
+
+#undef PDBG
+#define PDBG(fmt, args...)                                                    \
+dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",                              \
+	 __FUNCTION__, __LINE__ , ## args)
+
+#undef PDBGG
+#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
+
+#endif /* _ET61X251_H_ */
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
new file mode 100644
index 000000000000..dfc9dd732c9d
--- /dev/null
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -0,0 +1,2630 @@
+/***************************************************************************
+ * V4L2 driver for ET61X[12]51 PC Camera Controllers                       *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/poll.h>
+#include <linux/stat.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/page-flags.h>
+#include <linux/byteorder/generic.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+
+#include "et61x251.h"
+
+/*****************************************************************************/
+
+#define ET61X251_MODULE_NAME    "V4L2 driver for ET61X[12]51 "                \
+				"PC Camera Controllers"
+#define ET61X251_MODULE_AUTHOR  "(C) 2006 Luca Risolia"
+#define ET61X251_AUTHOR_EMAIL   "<luca.risolia@studio.unibo.it>"
+#define ET61X251_MODULE_LICENSE "GPL"
+#define ET61X251_MODULE_VERSION "1:1.02"
+#define ET61X251_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 2)
+
+/*****************************************************************************/
+
+MODULE_DEVICE_TABLE(usb, et61x251_id_table);
+
+MODULE_AUTHOR(ET61X251_MODULE_AUTHOR " " ET61X251_AUTHOR_EMAIL);
+MODULE_DESCRIPTION(ET61X251_MODULE_NAME);
+MODULE_VERSION(ET61X251_MODULE_VERSION);
+MODULE_LICENSE(ET61X251_MODULE_LICENSE);
+
+static short video_nr[] = {[0 ... ET61X251_MAX_DEVICES-1] = -1};
+module_param_array(video_nr, short, NULL, 0444);
+MODULE_PARM_DESC(video_nr,
+		 "\n<-1|n[,...]> Specify V4L2 minor mode number."
+		 "\n -1 = use next available (default)"
+		 "\n  n = use minor number n (integer >= 0)"
+		 "\nYou can specify up to "
+		 __MODULE_STRING(ET61X251_MAX_DEVICES) " cameras this way."
+		 "\nFor example:"
+		 "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+		 "\nthe second registered camera and use auto for the first"
+		 "\none and for every other camera."
+		 "\n");
+
+static short force_munmap[] = {[0 ... ET61X251_MAX_DEVICES-1] =
+			       ET61X251_FORCE_MUNMAP};
+module_param_array(force_munmap, bool, NULL, 0444);
+MODULE_PARM_DESC(force_munmap,
+		 "\n<0|1[,...]> Force the application to unmap previously"
+		 "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+		 "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+		 "\nthis feature. This parameter is specific for each"
+		 "\ndetected camera."
+		 "\n 0 = do not force memory unmapping"
+		 "\n 1 = force memory unmapping (save memory)"
+		 "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+		 "\n");
+
+static unsigned int frame_timeout[] = {[0 ... ET61X251_MAX_DEVICES-1] =
+				       ET61X251_FRAME_TIMEOUT};
+module_param_array(frame_timeout, uint, NULL, 0644);
+MODULE_PARM_DESC(frame_timeout,
+		 "\n<n[,...]> Timeout for a video frame in seconds."
+		 "\nThis parameter is specific for each detected camera."
+		 "\nDefault value is "
+		 __MODULE_STRING(ET61X251_FRAME_TIMEOUT)"."
+		 "\n");
+
+#ifdef ET61X251_DEBUG
+static unsigned short debug = ET61X251_DEBUG_LEVEL;
+module_param(debug, ushort, 0644);
+MODULE_PARM_DESC(debug,
+		 "\n<n> Debugging information level, from 0 to 3:"
+		 "\n0 = none (use carefully)"
+		 "\n1 = critical errors"
+		 "\n2 = significant informations"
+		 "\n3 = more verbose messages"
+		 "\nLevel 3 is useful for testing only, when only "
+		 "one device is used."
+		 "\nDefault value is "__MODULE_STRING(ET61X251_DEBUG_LEVEL)"."
+		 "\n");
+#endif
+
+/*****************************************************************************/
+
+static u32
+et61x251_request_buffers(struct et61x251_device* cam, u32 count,
+			 enum et61x251_io_method io)
+{
+	struct v4l2_pix_format* p = &(cam->sensor.pix_format);
+	struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
+	const size_t imagesize = cam->module_param.force_munmap ||
+				 io == IO_READ ?
+				 (p->width * p->height * p->priv) / 8 :
+				 (r->width * r->height * p->priv) / 8;
+	void* buff = NULL;
+	u32 i;
+
+	if (count > ET61X251_MAX_FRAMES)
+		count = ET61X251_MAX_FRAMES;
+
+	cam->nbuffers = count;
+	while (cam->nbuffers > 0) {
+		if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
+			break;
+		cam->nbuffers--;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize);
+		cam->frame[i].buf.index = i;
+		cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize);
+		cam->frame[i].buf.length = imagesize;
+		cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		cam->frame[i].buf.sequence = 0;
+		cam->frame[i].buf.field = V4L2_FIELD_NONE;
+		cam->frame[i].buf.memory = V4L2_MEMORY_MMAP;
+		cam->frame[i].buf.flags = 0;
+	}
+
+	return cam->nbuffers;
+}
+
+
+static void et61x251_release_buffers(struct et61x251_device* cam)
+{
+	if (cam->nbuffers) {
+		vfree(cam->frame[0].bufmem);
+		cam->nbuffers = 0;
+	}
+	cam->frame_current = NULL;
+}
+
+
+static void et61x251_empty_framequeues(struct et61x251_device* cam)
+{
+	u32 i;
+
+	INIT_LIST_HEAD(&cam->inqueue);
+	INIT_LIST_HEAD(&cam->outqueue);
+
+	for (i = 0; i < ET61X251_MAX_FRAMES; i++) {
+		cam->frame[i].state = F_UNUSED;
+		cam->frame[i].buf.bytesused = 0;
+	}
+}
+
+
+static void et61x251_requeue_outqueue(struct et61x251_device* cam)
+{
+	struct et61x251_frame_t *i;
+
+	list_for_each_entry(i, &cam->outqueue, frame) {
+		i->state = F_QUEUED;
+		list_add(&i->frame, &cam->inqueue);
+	}
+
+	INIT_LIST_HEAD(&cam->outqueue);
+}
+
+
+static void et61x251_queue_unusedframes(struct et61x251_device* cam)
+{
+	unsigned long lock_flags;
+	u32 i;
+
+	for (i = 0; i < cam->nbuffers; i++)
+		if (cam->frame[i].state == F_UNUSED) {
+			cam->frame[i].state = F_QUEUED;
+			spin_lock_irqsave(&cam->queue_lock, lock_flags);
+			list_add_tail(&cam->frame[i].frame, &cam->inqueue);
+			spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+		}
+}
+
+/*****************************************************************************/
+
+int et61x251_write_reg(struct et61x251_device* cam, u8 value, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* buff = cam->control_buffer;
+	int res;
+
+	*buff = value;
+
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+			      0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0) {
+		DBG(3, "Failed to write a register (value 0x%02X, index "
+		       "0x%02X, error %d)", value, index, res);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+int et61x251_read_reg(struct et61x251_device* cam, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* buff = cam->control_buffer;
+	int res;
+
+	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+			      0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		DBG(3, "Failed to read a register (index 0x%02X, error %d)",
+		    index, res);
+
+	return (res >= 0) ? (int)(*buff) : -1;
+}
+
+
+static int
+et61x251_i2c_wait(struct et61x251_device* cam, struct et61x251_sensor* sensor)
+{
+	int i, r;
+
+	for (i = 1; i <= 8; i++) {
+		if (sensor->interface == ET61X251_I2C_3WIRES) {
+			r = et61x251_read_reg(cam, 0x8e);
+			if (!(r & 0x02) && (r >= 0))
+				return 0;
+		} else {
+			r = et61x251_read_reg(cam, 0x8b);
+			if (!(r & 0x01) && (r >= 0))
+				return 0;
+		}
+		if (r < 0)
+			return -EIO;
+		udelay(8*8); /* minimum for sensors at 400kHz */
+	}
+
+	return -EBUSY;
+}
+
+
+int
+et61x251_i2c_try_read(struct et61x251_device* cam,
+		      struct et61x251_sensor* sensor, u8 address)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* data = cam->control_buffer;
+	int err = 0, res;
+
+	data[0] = address;
+	data[1] = cam->sensor.i2c_slave_id;
+	data[2] = cam->sensor.rsta | 0x10;
+	data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02);
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+			      0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += et61x251_i2c_wait(cam, sensor);
+
+	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+			      0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	if (err)
+		DBG(3, "I2C read failed for %s image sensor", sensor->name);
+
+	PDBGG("I2C read: address 0x%02X, value: 0x%02X", address, data[0]);
+
+	return err ? -1 : (int)data[0];
+}
+
+
+int
+et61x251_i2c_try_write(struct et61x251_device* cam,
+		       struct et61x251_sensor* sensor, u8 address, u8 value)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* data = cam->control_buffer;
+	int err = 0, res;
+
+	data[0] = address;
+	data[1] = cam->sensor.i2c_slave_id;
+	data[2] = cam->sensor.rsta | 0x12;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+			      0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	data[0] = value;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+			      0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += et61x251_i2c_wait(cam, sensor);
+
+	if (err)
+		DBG(3, "I2C write failed for %s image sensor", sensor->name);
+
+	PDBGG("I2C write: address 0x%02X, value: 0x%02X", address, value);
+
+	return err ? -1 : 0;
+}
+
+
+int
+et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2,
+		       u8 data3, u8 data4, u8 data5, u8 data6, u8 data7,
+		       u8 data8, u8 address)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* data = cam->control_buffer;
+	int err = 0, res;
+
+	data[0] = data2;
+	data[1] = data3;
+	data[2] = data4;
+	data[3] = data5;
+	data[4] = data6;
+	data[5] = data7;
+	data[6] = data8;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+			      0, 0x81, data, n-1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	data[0] = address;
+	data[1] = cam->sensor.i2c_slave_id;
+	data[2] = cam->sensor.rsta | 0x02 | (n << 4);
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+			      0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	/* Start writing through the serial interface */
+	data[0] = data1;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+			      0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += et61x251_i2c_wait(cam, &cam->sensor);
+
+	if (err)
+		DBG(3, "I2C raw write failed for %s image sensor",
+		    cam->sensor.name);
+
+	PDBGG("I2C raw write: %u bytes, address = 0x%02X, data1 = 0x%02X, "
+	      "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X,"
+	      " data6 = 0x%02X, data7 = 0x%02X, data8 = 0x%02X", n, address,
+	      data1, data2, data3, data4, data5, data6, data7, data8);
+
+	return err ? -1 : 0;
+
+}
+
+
+int et61x251_i2c_read(struct et61x251_device* cam, u8 address)
+{
+	return et61x251_i2c_try_read(cam, &cam->sensor, address);
+}
+
+
+int et61x251_i2c_write(struct et61x251_device* cam, u8 address, u8 value)
+{
+	return et61x251_i2c_try_write(cam, &cam->sensor, address, value);
+}
+
+/*****************************************************************************/
+
+static void et61x251_urb_complete(struct urb *urb, struct pt_regs* regs)
+{
+	struct et61x251_device* cam = urb->context;
+	struct et61x251_frame_t** f;
+	size_t imagesize;
+	u8 i;
+	int err = 0;
+
+	if (urb->status == -ENOENT)
+		return;
+
+	f = &cam->frame_current;
+
+	if (cam->stream == STREAM_INTERRUPT) {
+		cam->stream = STREAM_OFF;
+		if ((*f))
+			(*f)->state = F_QUEUED;
+		DBG(3, "Stream interrupted");
+		wake_up(&cam->wait_stream);
+	}
+
+	if (cam->state & DEV_DISCONNECTED)
+		return;
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		wake_up_interruptible(&cam->wait_frame);
+		return;
+	}
+
+	if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue))
+		goto resubmit_urb;
+
+	if (!(*f))
+		(*f) = list_entry(cam->inqueue.next, struct et61x251_frame_t,
+				  frame);
+
+	imagesize = (cam->sensor.pix_format.width *
+		     cam->sensor.pix_format.height *
+		     cam->sensor.pix_format.priv) / 8;
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		unsigned int len, status;
+		void *pos;
+		u8* b1, * b2, sof;
+		const u8 VOID_BYTES = 6;
+		size_t imglen;
+
+		len = urb->iso_frame_desc[i].actual_length;
+		status = urb->iso_frame_desc[i].status;
+		pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
+
+		if (status) {
+			DBG(3, "Error in isochronous frame");
+			(*f)->state = F_ERROR;
+			continue;
+		}
+
+		b1 = pos++;
+		b2 = pos++;
+		sof = ((*b1 & 0x3f) == 63);
+		imglen = ((*b1 & 0xc0) << 2) | *b2;
+
+		PDBGG("Isochrnous frame: length %u, #%u i, image length %zu",
+		      len, i, imglen);
+
+		if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR)
+start_of_frame:
+			if (sof) {
+				(*f)->state = F_GRABBING;
+				(*f)->buf.bytesused = 0;
+				do_gettimeofday(&(*f)->buf.timestamp);
+				pos += 22;
+				DBG(3, "SOF detected: new video frame");
+			}
+
+		if ((*f)->state == F_GRABBING) {
+			if (sof && (*f)->buf.bytesused) {
+				if (cam->sensor.pix_format.pixelformat ==
+							 V4L2_PIX_FMT_ET61X251)
+					goto end_of_frame;
+				else {
+					DBG(3, "Not expected SOF detected "
+					       "after %lu bytes",
+					   (unsigned long)(*f)->buf.bytesused);
+					(*f)->state = F_ERROR;
+					continue;
+				}
+			}
+
+			if ((*f)->buf.bytesused + imglen > imagesize) {
+				DBG(3, "Video frame size exceeded");
+				(*f)->state = F_ERROR;
+				continue;
+			}
+
+			pos += VOID_BYTES;
+
+			memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, imglen);
+			(*f)->buf.bytesused += imglen;
+
+			if ((*f)->buf.bytesused == imagesize) {
+				u32 b;
+end_of_frame:
+				b = (*f)->buf.bytesused;
+				(*f)->state = F_DONE;
+				(*f)->buf.sequence= ++cam->frame_count;
+				spin_lock(&cam->queue_lock);
+				list_move_tail(&(*f)->frame, &cam->outqueue);
+				if (!list_empty(&cam->inqueue))
+					(*f) = list_entry(cam->inqueue.next,
+						       struct et61x251_frame_t,
+							  frame);
+				else
+					(*f) = NULL;
+				spin_unlock(&cam->queue_lock);
+				DBG(3, "Video frame captured: : %lu bytes",
+				       (unsigned long)(b));
+
+				if (!(*f))
+					goto resubmit_urb;
+
+				if (sof &&
+				    cam->sensor.pix_format.pixelformat ==
+							 V4L2_PIX_FMT_ET61X251)
+					goto start_of_frame;
+			}
+		}
+	}
+
+resubmit_urb:
+	urb->dev = cam->usbdev;
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0 && err != -EPERM) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "usb_submit_urb() failed");
+	}
+
+	wake_up_interruptible(&cam->wait_frame);
+}
+
+
+static int et61x251_start_transfer(struct et61x251_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	struct urb* urb;
+	const unsigned int wMaxPacketSize[] = {0, 256, 384, 512, 640, 768, 832,
+					       864, 896, 920, 956, 980, 1000,
+					       1022};
+	const unsigned int psz = wMaxPacketSize[ET61X251_ALTERNATE_SETTING];
+	s8 i, j;
+	int err = 0;
+
+	for (i = 0; i < ET61X251_URBS; i++) {
+		cam->transfer_buffer[i] = kzalloc(ET61X251_ISO_PACKETS * psz,
+						  GFP_KERNEL);
+		if (!cam->transfer_buffer[i]) {
+			err = -ENOMEM;
+			DBG(1, "Not enough memory");
+			goto free_buffers;
+		}
+	}
+
+	for (i = 0; i < ET61X251_URBS; i++) {
+		urb = usb_alloc_urb(ET61X251_ISO_PACKETS, GFP_KERNEL);
+		cam->urb[i] = urb;
+		if (!urb) {
+			err = -ENOMEM;
+			DBG(1, "usb_alloc_urb() failed");
+			goto free_urbs;
+		}
+		urb->dev = udev;
+		urb->context = cam;
+		urb->pipe = usb_rcvisocpipe(udev, 1);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->number_of_packets = ET61X251_ISO_PACKETS;
+		urb->complete = et61x251_urb_complete;
+		urb->transfer_buffer = cam->transfer_buffer[i];
+		urb->transfer_buffer_length = psz * ET61X251_ISO_PACKETS;
+		urb->interval = 1;
+		for (j = 0; j < ET61X251_ISO_PACKETS; j++) {
+			urb->iso_frame_desc[j].offset = psz * j;
+			urb->iso_frame_desc[j].length = psz;
+		}
+	}
+
+	err = et61x251_write_reg(cam, 0x01, 0x03);
+	err = et61x251_write_reg(cam, 0x00, 0x03);
+	err = et61x251_write_reg(cam, 0x08, 0x03);
+	if (err) {
+		err = -EIO;
+		DBG(1, "I/O hardware error");
+		goto free_urbs;
+	}
+
+	err = usb_set_interface(udev, 0, ET61X251_ALTERNATE_SETTING);
+	if (err) {
+		DBG(1, "usb_set_interface() failed");
+		goto free_urbs;
+	}
+
+	cam->frame_current = NULL;
+
+	for (i = 0; i < ET61X251_URBS; i++) {
+		err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
+		if (err) {
+			for (j = i-1; j >= 0; j--)
+				usb_kill_urb(cam->urb[j]);
+			DBG(1, "usb_submit_urb() failed, error %d", err);
+			goto free_urbs;
+		}
+	}
+
+	return 0;
+
+free_urbs:
+	for (i = 0; (i < ET61X251_URBS) &&  cam->urb[i]; i++)
+		usb_free_urb(cam->urb[i]);
+
+free_buffers:
+	for (i = 0; (i < ET61X251_URBS) && cam->transfer_buffer[i]; i++)
+		kfree(cam->transfer_buffer[i]);
+
+	return err;
+}
+
+
+static int et61x251_stop_transfer(struct et61x251_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	s8 i;
+	int err = 0;
+
+	if (cam->state & DEV_DISCONNECTED)
+		return 0;
+
+	for (i = ET61X251_URBS-1; i >= 0; i--) {
+		usb_kill_urb(cam->urb[i]);
+		usb_free_urb(cam->urb[i]);
+		kfree(cam->transfer_buffer[i]);
+	}
+
+	err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
+	if (err)
+		DBG(3, "usb_set_interface() failed");
+
+	return err;
+}
+
+
+static int et61x251_stream_interrupt(struct et61x251_device* cam)
+{
+	long timeout;
+
+	cam->stream = STREAM_INTERRUPT;
+	timeout = wait_event_timeout(cam->wait_stream,
+				     (cam->stream == STREAM_OFF) ||
+				     (cam->state & DEV_DISCONNECTED),
+				     ET61X251_URB_TIMEOUT);
+	if (cam->state & DEV_DISCONNECTED)
+		return -ENODEV;
+	else if (cam->stream != STREAM_OFF) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "URB timeout reached. The camera is misconfigured. To "
+		       "use it, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*****************************************************************************/
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static u8 et61x251_strtou8(const char* buff, size_t len, ssize_t* count)
+{
+	char str[5];
+	char* endp;
+	unsigned long val;
+
+	if (len < 4) {
+		strncpy(str, buff, len);
+		str[len+1] = '\0';
+	} else {
+		strncpy(str, buff, 4);
+		str[4] = '\0';
+	}
+
+	val = simple_strtoul(str, &endp, 0);
+
+	*count = 0;
+	if (val <= 0xff)
+		*count = (ssize_t)(endp - str);
+	if ((*count) && (len == *count+1) && (buff[*count] == '\n'))
+		*count += 1;
+
+	return (u8)val;
+}
+
+/*
+   NOTE 1: being inside one of the following methods implies that the v4l
+	   device exists for sure (see kobjects and reference counters)
+   NOTE 2: buffers are PAGE_SIZE long
+*/
+
+static ssize_t et61x251_show_reg(struct class_device* cd, char* buf)
+{
+	struct et61x251_device* cam;
+	ssize_t count;
+
+	if (mutex_lock_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	count = sprintf(buf, "%u\n", cam->sysfs.reg);
+
+	mutex_unlock(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+et61x251_store_reg(struct class_device* cd, const char* buf, size_t len)
+{
+	struct et61x251_device* cam;
+	u8 index;
+	ssize_t count;
+
+	if (mutex_lock_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	index = et61x251_strtou8(buf, len, &count);
+	if (index > 0x8e || !count) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -EINVAL;
+	}
+
+	cam->sysfs.reg = index;
+
+	DBG(2, "Moved ET61X[12]51 register index to 0x%02X", cam->sysfs.reg);
+	DBG(3, "Written bytes: %zd", count);
+
+	mutex_unlock(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t et61x251_show_val(struct class_device* cd, char* buf)
+{
+	struct et61x251_device* cam;
+	ssize_t count;
+	int val;
+
+	if (mutex_lock_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	if ((val = et61x251_read_reg(cam, cam->sysfs.reg)) < 0) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -EIO;
+	}
+
+	count = sprintf(buf, "%d\n", val);
+
+	DBG(3, "Read bytes: %zd", count);
+
+	mutex_unlock(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+et61x251_store_val(struct class_device* cd, const char* buf, size_t len)
+{
+	struct et61x251_device* cam;
+	u8 value;
+	ssize_t count;
+	int err;
+
+	if (mutex_lock_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	value = et61x251_strtou8(buf, len, &count);
+	if (!count) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -EINVAL;
+	}
+
+	err = et61x251_write_reg(cam, value, cam->sysfs.reg);
+	if (err) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -EIO;
+	}
+
+	DBG(2, "Written ET61X[12]51 reg. 0x%02X, val. 0x%02X",
+	    cam->sysfs.reg, value);
+	DBG(3, "Written bytes: %zd", count);
+
+	mutex_unlock(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf)
+{
+	struct et61x251_device* cam;
+	ssize_t count;
+
+	if (mutex_lock_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg);
+
+	DBG(3, "Read bytes: %zd", count);
+
+	mutex_unlock(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
+{
+	struct et61x251_device* cam;
+	u8 index;
+	ssize_t count;
+
+	if (mutex_lock_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	index = et61x251_strtou8(buf, len, &count);
+	if (!count) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -EINVAL;
+	}
+
+	cam->sysfs.i2c_reg = index;
+
+	DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
+	DBG(3, "Written bytes: %zd", count);
+
+	mutex_unlock(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf)
+{
+	struct et61x251_device* cam;
+	ssize_t count;
+	int val;
+
+	if (mutex_lock_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	if (!(cam->sensor.sysfs_ops & ET61X251_I2C_READ)) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENOSYS;
+	}
+
+	if ((val = et61x251_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -EIO;
+	}
+
+	count = sprintf(buf, "%d\n", val);
+
+	DBG(3, "Read bytes: %zd", count);
+
+	mutex_unlock(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
+{
+	struct et61x251_device* cam;
+	u8 value;
+	ssize_t count;
+	int err;
+
+	if (mutex_lock_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	if (!(cam->sensor.sysfs_ops & ET61X251_I2C_READ)) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -ENOSYS;
+	}
+
+	value = et61x251_strtou8(buf, len, &count);
+	if (!count) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -EINVAL;
+	}
+
+	err = et61x251_i2c_write(cam, cam->sysfs.i2c_reg, value);
+	if (err) {
+		mutex_unlock(&et61x251_sysfs_lock);
+		return -EIO;
+	}
+
+	DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X",
+	    cam->sysfs.i2c_reg, value);
+	DBG(3, "Written bytes: %zd", count);
+
+	mutex_unlock(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
+			 et61x251_show_reg, et61x251_store_reg);
+static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
+			 et61x251_show_val, et61x251_store_val);
+static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
+			 et61x251_show_i2c_reg, et61x251_store_i2c_reg);
+static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
+			 et61x251_show_i2c_val, et61x251_store_i2c_val);
+
+
+static void et61x251_create_sysfs(struct et61x251_device* cam)
+{
+	struct video_device *v4ldev = cam->v4ldev;
+
+	video_device_create_file(v4ldev, &class_device_attr_reg);
+	video_device_create_file(v4ldev, &class_device_attr_val);
+	if (cam->sensor.sysfs_ops) {
+		video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
+		video_device_create_file(v4ldev, &class_device_attr_i2c_val);
+	}
+}
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
+
+/*****************************************************************************/
+
+static int
+et61x251_set_pix_format(struct et61x251_device* cam,
+			struct v4l2_pix_format* pix)
+{
+	int r, err = 0;
+
+	if ((r = et61x251_read_reg(cam, 0x12)) < 0)
+		err += r;
+	if (pix->pixelformat == V4L2_PIX_FMT_ET61X251)
+		err += et61x251_write_reg(cam, r & 0xfd, 0x12);
+	else
+		err += et61x251_write_reg(cam, r | 0x02, 0x12);
+
+	return err ? -EIO : 0;
+}
+
+
+static int
+et61x251_set_compression(struct et61x251_device* cam,
+			 struct v4l2_jpegcompression* compression)
+{
+	int r, err = 0;
+
+	if ((r = et61x251_read_reg(cam, 0x12)) < 0)
+		err += r;
+	if (compression->quality == 0)
+		err += et61x251_write_reg(cam, r & 0xfb, 0x12);
+	else
+		err += et61x251_write_reg(cam, r | 0x04, 0x12);
+
+	return err ? -EIO : 0;
+}
+
+
+static int et61x251_set_scale(struct et61x251_device* cam, u8 scale)
+{
+	int r = 0, err = 0;
+
+	r = et61x251_read_reg(cam, 0x12);
+	if (r < 0)
+		err += r;
+
+	if (scale == 1)
+		err += et61x251_write_reg(cam, r & ~0x01, 0x12);
+	else if (scale == 2)
+		err += et61x251_write_reg(cam, r | 0x01, 0x12);
+
+	if (err)
+		return -EIO;
+
+	PDBGG("Scaling factor: %u", scale);
+
+	return 0;
+}
+
+
+static int
+et61x251_set_crop(struct et61x251_device* cam, struct v4l2_rect* rect)
+{
+	struct et61x251_sensor* s = &cam->sensor;
+	u16 fmw_sx = (u16)(rect->left - s->cropcap.bounds.left +
+			   s->active_pixel.left),
+	    fmw_sy = (u16)(rect->top - s->cropcap.bounds.top +
+			   s->active_pixel.top),
+	    fmw_length = (u16)(rect->width),
+	    fmw_height = (u16)(rect->height);
+	int err = 0;
+
+	err += et61x251_write_reg(cam, fmw_sx & 0xff, 0x69);
+	err += et61x251_write_reg(cam, fmw_sy & 0xff, 0x6a);
+	err += et61x251_write_reg(cam, fmw_length & 0xff, 0x6b);
+	err += et61x251_write_reg(cam, fmw_height & 0xff, 0x6c);
+	err += et61x251_write_reg(cam, (fmw_sx >> 8) | ((fmw_sy & 0x300) >> 6)
+				       | ((fmw_length & 0x300) >> 4)
+				       | ((fmw_height & 0x300) >> 2), 0x6d);
+	if (err)
+		return -EIO;
+
+	PDBGG("fmw_sx, fmw_sy, fmw_length, fmw_height: %u %u %u %u",
+	      fmw_sx, fmw_sy, fmw_length, fmw_height);
+
+	return 0;
+}
+
+
+static int et61x251_init(struct et61x251_device* cam)
+{
+	struct et61x251_sensor* s = &cam->sensor;
+	struct v4l2_control ctrl;
+	struct v4l2_queryctrl *qctrl;
+	struct v4l2_rect* rect;
+	u8 i = 0;
+	int err = 0;
+
+	if (!(cam->state & DEV_INITIALIZED)) {
+		init_waitqueue_head(&cam->open);
+		qctrl = s->qctrl;
+		rect = &(s->cropcap.defrect);
+		cam->compression.quality = ET61X251_COMPRESSION_QUALITY;
+	} else { /* use current values */
+		qctrl = s->_qctrl;
+		rect = &(s->_rect);
+	}
+
+	err += et61x251_set_scale(cam, rect->width / s->pix_format.width);
+	err += et61x251_set_crop(cam, rect);
+	if (err)
+		return err;
+
+	if (s->init) {
+		err = s->init(cam);
+		if (err) {
+			DBG(3, "Sensor initialization failed");
+			return err;
+		}
+	}
+
+	err += et61x251_set_compression(cam, &cam->compression);
+	err += et61x251_set_pix_format(cam, &s->pix_format);
+	if (s->set_pix_format)
+		err += s->set_pix_format(cam, &s->pix_format);
+	if (err)
+		return err;
+
+	if (s->pix_format.pixelformat == V4L2_PIX_FMT_ET61X251)
+		DBG(3, "Compressed video format is active, quality %d",
+		    cam->compression.quality);
+	else
+		DBG(3, "Uncompressed video format is active");
+
+	if (s->set_crop)
+		if ((err = s->set_crop(cam, rect))) {
+			DBG(3, "set_crop() failed");
+			return err;
+		}
+
+	if (s->set_ctrl) {
+		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+			if (s->qctrl[i].id != 0 &&
+			    !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) {
+				ctrl.id = s->qctrl[i].id;
+				ctrl.value = qctrl[i].default_value;
+				err = s->set_ctrl(cam, &ctrl);
+				if (err) {
+					DBG(3, "Set %s control failed",
+					    s->qctrl[i].name);
+					return err;
+				}
+				DBG(3, "Image sensor supports '%s' control",
+				    s->qctrl[i].name);
+			}
+	}
+
+	if (!(cam->state & DEV_INITIALIZED)) {
+		mutex_init(&cam->fileop_mutex);
+		spin_lock_init(&cam->queue_lock);
+		init_waitqueue_head(&cam->wait_frame);
+		init_waitqueue_head(&cam->wait_stream);
+		cam->nreadbuffers = 2;
+		memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl));
+		memcpy(&(s->_rect), &(s->cropcap.defrect),
+		       sizeof(struct v4l2_rect));
+		cam->state |= DEV_INITIALIZED;
+	}
+
+	DBG(2, "Initialization succeeded");
+	return 0;
+}
+
+
+static void et61x251_release_resources(struct et61x251_device* cam)
+{
+	mutex_lock(&et61x251_sysfs_lock);
+
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	video_set_drvdata(cam->v4ldev, NULL);
+	video_unregister_device(cam->v4ldev);
+
+	usb_put_dev(cam->usbdev);
+
+	mutex_unlock(&et61x251_sysfs_lock);
+
+	kfree(cam->control_buffer);
+}
+
+/*****************************************************************************/
+
+static int et61x251_open(struct inode* inode, struct file* filp)
+{
+	struct et61x251_device* cam;
+	int err = 0;
+
+	/*
+	   This is the only safe way to prevent race conditions with
+	   disconnect
+	*/
+	if (!down_read_trylock(&et61x251_disconnect))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(video_devdata(filp));
+
+	if (mutex_lock_interruptible(&cam->dev_mutex)) {
+		up_read(&et61x251_disconnect);
+		return -ERESTARTSYS;
+	}
+
+	if (cam->users) {
+		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+		if ((filp->f_flags & O_NONBLOCK) ||
+		    (filp->f_flags & O_NDELAY)) {
+			err = -EWOULDBLOCK;
+			goto out;
+		}
+		mutex_unlock(&cam->dev_mutex);
+		err = wait_event_interruptible_exclusive(cam->open,
+						  cam->state & DEV_DISCONNECTED
+							 || !cam->users);
+		if (err) {
+			up_read(&et61x251_disconnect);
+			return err;
+		}
+		if (cam->state & DEV_DISCONNECTED) {
+			up_read(&et61x251_disconnect);
+			return -ENODEV;
+		}
+		mutex_lock(&cam->dev_mutex);
+	}
+
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		err = et61x251_init(cam);
+		if (err) {
+			DBG(1, "Initialization failed again. "
+			       "I will retry on next open().");
+			goto out;
+		}
+		cam->state &= ~DEV_MISCONFIGURED;
+	}
+
+	if ((err = et61x251_start_transfer(cam)))
+		goto out;
+
+	filp->private_data = cam;
+	cam->users++;
+	cam->io = IO_NONE;
+	cam->stream = STREAM_OFF;
+	cam->nbuffers = 0;
+	cam->frame_count = 0;
+	et61x251_empty_framequeues(cam);
+
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+
+out:
+	mutex_unlock(&cam->dev_mutex);
+	up_read(&et61x251_disconnect);
+	return err;
+}
+
+
+static int et61x251_release(struct inode* inode, struct file* filp)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+
+	mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */
+
+	et61x251_stop_transfer(cam);
+
+	et61x251_release_buffers(cam);
+
+	if (cam->state & DEV_DISCONNECTED) {
+		et61x251_release_resources(cam);
+		mutex_unlock(&cam->dev_mutex);
+		kfree(cam);
+		return 0;
+	}
+
+	cam->users--;
+	wake_up_interruptible_nr(&cam->open, 1);
+
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+
+	mutex_unlock(&cam->dev_mutex);
+
+	return 0;
+}
+
+
+static ssize_t
+et61x251_read(struct file* filp, char __user * buf,
+	      size_t count, loff_t* f_pos)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+	struct et61x251_frame_t* f, * i;
+	unsigned long lock_flags;
+	long timeout;
+	int err = 0;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	if (cam->io == IO_MMAP) {
+		DBG(3, "Close and open the device again to choose the read "
+		       "method");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EINVAL;
+	}
+
+	if (cam->io == IO_NONE) {
+		if (!et61x251_request_buffers(cam, cam->nreadbuffers,
+					      IO_READ)) {
+			DBG(1, "read() failed, not enough memory");
+			mutex_unlock(&cam->fileop_mutex);
+			return -ENOMEM;
+		}
+		cam->io = IO_READ;
+		cam->stream = STREAM_ON;
+	}
+
+	if (list_empty(&cam->inqueue)) {
+		if (!list_empty(&cam->outqueue))
+			et61x251_empty_framequeues(cam);
+		et61x251_queue_unusedframes(cam);
+	}
+
+	if (!count) {
+		mutex_unlock(&cam->fileop_mutex);
+		return 0;
+	}
+
+	if (list_empty(&cam->outqueue)) {
+		if (filp->f_flags & O_NONBLOCK) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -EAGAIN;
+		}
+		timeout = wait_event_interruptible_timeout
+			  ( cam->wait_frame,
+			    (!list_empty(&cam->outqueue)) ||
+			    (cam->state & DEV_DISCONNECTED) ||
+			    (cam->state & DEV_MISCONFIGURED),
+			    cam->module_param.frame_timeout *
+			    1000 * msecs_to_jiffies(1) );
+		if (timeout < 0) {
+			mutex_unlock(&cam->fileop_mutex);
+			return timeout;
+		}
+		if (cam->state & DEV_DISCONNECTED) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -ENODEV;
+		}
+		if (!timeout || (cam->state & DEV_MISCONFIGURED)) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -EIO;
+		}
+	}
+
+	f = list_entry(cam->outqueue.prev, struct et61x251_frame_t, frame);
+
+	if (count > f->buf.bytesused)
+		count = f->buf.bytesused;
+
+	if (copy_to_user(buf, f->bufmem, count)) {
+		err = -EFAULT;
+		goto exit;
+	}
+	*f_pos += count;
+
+exit:
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	list_for_each_entry(i, &cam->outqueue, frame)
+		i->state = F_UNUSED;
+	INIT_LIST_HEAD(&cam->outqueue);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	et61x251_queue_unusedframes(cam);
+
+	PDBGG("Frame #%lu, bytes read: %zu",
+	      (unsigned long)f->buf.index, count);
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return err ? err : count;
+}
+
+
+static unsigned int et61x251_poll(struct file *filp, poll_table *wait)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+	struct et61x251_frame_t* f;
+	unsigned long lock_flags;
+	unsigned int mask = 0;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return POLLERR;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		goto error;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		goto error;
+	}
+
+	if (cam->io == IO_NONE) {
+		if (!et61x251_request_buffers(cam, cam->nreadbuffers,
+					      IO_READ)) {
+			DBG(1, "poll() failed, not enough memory");
+			goto error;
+		}
+		cam->io = IO_READ;
+		cam->stream = STREAM_ON;
+	}
+
+	if (cam->io == IO_READ) {
+		spin_lock_irqsave(&cam->queue_lock, lock_flags);
+		list_for_each_entry(f, &cam->outqueue, frame)
+			f->state = F_UNUSED;
+		INIT_LIST_HEAD(&cam->outqueue);
+		spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+		et61x251_queue_unusedframes(cam);
+	}
+
+	poll_wait(filp, &cam->wait_frame, wait);
+
+	if (!list_empty(&cam->outqueue))
+		mask |= POLLIN | POLLRDNORM;
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return mask;
+
+error:
+	mutex_unlock(&cam->fileop_mutex);
+	return POLLERR;
+}
+
+
+static void et61x251_vm_open(struct vm_area_struct* vma)
+{
+	struct et61x251_frame_t* f = vma->vm_private_data;
+	f->vma_use_count++;
+}
+
+
+static void et61x251_vm_close(struct vm_area_struct* vma)
+{
+	/* NOTE: buffers are not freed here */
+	struct et61x251_frame_t* f = vma->vm_private_data;
+	f->vma_use_count--;
+}
+
+
+static struct vm_operations_struct et61x251_vm_ops = {
+	.open = et61x251_vm_open,
+	.close = et61x251_vm_close,
+};
+
+
+static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+	unsigned long size = vma->vm_end - vma->vm_start,
+		      start = vma->vm_start;
+	void *pos;
+	u32 i;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
+	    size != PAGE_ALIGN(cam->frame[0].buf.length)) {
+		mutex_unlock(&cam->fileop_mutex);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff)
+			break;
+	}
+	if (i == cam->nbuffers) {
+		mutex_unlock(&cam->fileop_mutex);
+		return -EINVAL;
+	}
+
+	vma->vm_flags |= VM_IO;
+	vma->vm_flags |= VM_RESERVED;
+
+	pos = cam->frame[i].bufmem;
+	while (size > 0) { /* size is page-aligned */
+		if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -EAGAIN;
+		}
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	vma->vm_ops = &et61x251_vm_ops;
+	vma->vm_private_data = &cam->frame[i];
+
+	et61x251_vm_open(vma);
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return 0;
+}
+
+/*****************************************************************************/
+
+static int
+et61x251_vidioc_querycap(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_capability cap = {
+		.driver = "et61x251",
+		.version = ET61X251_MODULE_VERSION_CODE,
+		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+				V4L2_CAP_STREAMING,
+	};
+
+	strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
+	if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
+		strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
+			sizeof(cap.bus_info));
+
+	if (copy_to_user(arg, &cap, sizeof(cap)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_input i;
+
+	if (copy_from_user(&i, arg, sizeof(i)))
+		return -EFAULT;
+
+	if (i.index)
+		return -EINVAL;
+
+	memset(&i, 0, sizeof(i));
+	strcpy(i.name, "Camera");
+	i.type = V4L2_INPUT_TYPE_CAMERA;
+
+	if (copy_to_user(arg, &i, sizeof(i)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_g_input(struct et61x251_device* cam, void __user * arg)
+{
+	int index = 0;
+
+	if (copy_to_user(arg, &index, sizeof(index)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_s_input(struct et61x251_device* cam, void __user * arg)
+{
+	int index;
+
+	if (copy_from_user(&index, arg, sizeof(index)))
+		return -EFAULT;
+
+	if (index != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_query_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = &cam->sensor;
+	struct v4l2_queryctrl qc;
+	u8 i;
+
+	if (copy_from_user(&qc, arg, sizeof(qc)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (qc.id && qc.id == s->qctrl[i].id) {
+			memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
+			if (copy_to_user(arg, &qc, sizeof(qc)))
+				return -EFAULT;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+
+static int
+et61x251_vidioc_g_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = &cam->sensor;
+	struct v4l2_control ctrl;
+	int err = 0;
+	u8 i;
+
+	if (!s->get_ctrl && !s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	if (!s->get_ctrl) {
+		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+			if (ctrl.id == s->qctrl[i].id) {
+				ctrl.value = s->_qctrl[i].default_value;
+				goto exit;
+			}
+		return -EINVAL;
+	} else
+		err = s->get_ctrl(cam, &ctrl);
+
+exit:
+	if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
+		return -EFAULT;
+
+	return err;
+}
+
+
+static int
+et61x251_vidioc_s_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = &cam->sensor;
+	struct v4l2_control ctrl;
+	u8 i;
+	int err = 0;
+
+	if (!s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (ctrl.id == s->qctrl[i].id) {
+			if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)
+				return -EINVAL;
+			if (ctrl.value < s->qctrl[i].minimum ||
+			    ctrl.value > s->qctrl[i].maximum)
+				return -ERANGE;
+			ctrl.value -= ctrl.value % s->qctrl[i].step;
+			break;
+		}
+
+	if ((err = s->set_ctrl(cam, &ctrl)))
+		return err;
+
+	s->_qctrl[i].default_value = ctrl.value;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_cropcap(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_cropcap* cc = &(cam->sensor.cropcap);
+
+	cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	cc->pixelaspect.numerator = 1;
+	cc->pixelaspect.denominator = 1;
+
+	if (copy_to_user(arg, cc, sizeof(*cc)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_g_crop(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = &cam->sensor;
+	struct v4l2_crop crop = {
+		.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+	};
+
+	memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
+
+	if (copy_to_user(arg, &crop, sizeof(crop)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = &cam->sensor;
+	struct v4l2_crop crop;
+	struct v4l2_rect* rect;
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	struct v4l2_pix_format* pix_format = &(s->pix_format);
+	u8 scale;
+	const enum et61x251_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&crop, arg, sizeof(crop)))
+		return -EFAULT;
+
+	rect = &(crop.c);
+
+	if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_CROP failed. "
+				       "Unmap the buffers first.");
+				return -EINVAL;
+			}
+
+	/* Preserve R,G or B origin */
+	rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
+	rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
+
+	if (rect->width < 4)
+		rect->width = 4;
+	if (rect->height < 4)
+		rect->height = 4;
+	if (rect->width > bounds->width)
+		rect->width = bounds->width;
+	if (rect->height > bounds->height)
+		rect->height = bounds->height;
+	if (rect->left < bounds->left)
+		rect->left = bounds->left;
+	if (rect->top < bounds->top)
+		rect->top = bounds->top;
+	if (rect->left + rect->width > bounds->left + bounds->width)
+		rect->left = bounds->left+bounds->width - rect->width;
+	if (rect->top + rect->height > bounds->top + bounds->height)
+		rect->top = bounds->top+bounds->height - rect->height;
+
+	rect->width &= ~3L;
+	rect->height &= ~3L;
+
+	if (ET61X251_PRESERVE_IMGSCALE) {
+		/* Calculate the actual scaling factor */
+		u32 a, b;
+		a = rect->width * rect->height;
+		b = pix_format->width * pix_format->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+	} else
+		scale = 1;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &crop, sizeof(crop))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap || cam->io == IO_READ)
+		et61x251_release_buffers(cam);
+
+	err = et61x251_set_crop(cam, rect);
+	if (s->set_crop)
+		err += s->set_crop(cam, rect);
+	err += et61x251_set_scale(cam, scale);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	s->pix_format.width = rect->width/scale;
+	s->pix_format.height = rect->height/scale;
+	memcpy(&(s->_rect), rect, sizeof(*rect));
+
+	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
+	    nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		et61x251_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		et61x251_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_enum_fmt(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_fmtdesc fmtd;
+
+	if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
+		return -EFAULT;
+
+	if (fmtd.index == 0) {
+		strcpy(fmtd.description, "bayer rgb");
+		fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
+	} else if (fmtd.index == 1) {
+		strcpy(fmtd.description, "compressed");
+		fmtd.pixelformat = V4L2_PIX_FMT_ET61X251;
+		fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
+	} else
+		return -EINVAL;
+
+	fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
+
+	if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_g_fmt(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_format format;
+	struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format);
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_ET61X251)
+			     ? 0 : (pfmt->width * pfmt->priv) / 8;
+	pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
+	pfmt->field = V4L2_FIELD_NONE;
+	memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
+
+	if (copy_to_user(arg, &format, sizeof(format)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
+			  void __user * arg)
+{
+	struct et61x251_sensor* s = &cam->sensor;
+	struct v4l2_format format;
+	struct v4l2_pix_format* pix;
+	struct v4l2_pix_format* pfmt = &(s->pix_format);
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	struct v4l2_rect rect;
+	u8 scale;
+	const enum et61x251_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	pix = &(format.fmt.pix);
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	memcpy(&rect, &(s->_rect), sizeof(rect));
+
+	{ /* calculate the actual scaling factor */
+		u32 a, b;
+		a = rect.width * rect.height;
+		b = pix->width * pix->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+	}
+
+	rect.width = scale * pix->width;
+	rect.height = scale * pix->height;
+
+	if (rect.width < 4)
+		rect.width = 4;
+	if (rect.height < 4)
+		rect.height = 4;
+	if (rect.width > bounds->left + bounds->width - rect.left)
+		rect.width = bounds->left + bounds->width - rect.left;
+	if (rect.height > bounds->top + bounds->height - rect.top)
+		rect.height = bounds->top + bounds->height - rect.top;
+
+	rect.width &= ~3L;
+	rect.height &= ~3L;
+
+	{ /* adjust the scaling factor */
+		u32 a, b;
+		a = rect.width * rect.height;
+		b = pix->width * pix->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+	}
+
+	pix->width = rect.width / scale;
+	pix->height = rect.height / scale;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_ET61X251 &&
+	    pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
+		pix->pixelformat = pfmt->pixelformat;
+	pix->priv = pfmt->priv; /* bpp */
+	pix->colorspace = pfmt->colorspace;
+	pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_ET61X251)
+			    ? 0 : (pix->width * pix->priv) / 8;
+	pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
+	pix->field = V4L2_FIELD_NONE;
+
+	if (cmd == VIDIOC_TRY_FMT) {
+		if (copy_to_user(arg, &format, sizeof(format)))
+			return -EFAULT;
+		return 0;
+	}
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_FMT failed. "
+				       "Unmap the buffers first.");
+				return -EINVAL;
+			}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &format, sizeof(format))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap || cam->io == IO_READ)
+		et61x251_release_buffers(cam);
+
+	err += et61x251_set_pix_format(cam, pix);
+	err += et61x251_set_crop(cam, &rect);
+	if (s->set_pix_format)
+		err += s->set_pix_format(cam, pix);
+	if (s->set_crop)
+		err += s->set_crop(cam, &rect);
+	err += et61x251_set_scale(cam, scale);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	memcpy(pfmt, pix, sizeof(*pix));
+	memcpy(&(s->_rect), &rect, sizeof(rect));
+
+	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
+	    nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		et61x251_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		et61x251_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_g_jpegcomp(struct et61x251_device* cam, void __user * arg)
+{
+	if (copy_to_user(arg, &cam->compression,
+			 sizeof(cam->compression)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_jpegcompression jc;
+	const enum et61x251_stream_state stream = cam->stream;
+	int err = 0;
+
+	if (copy_from_user(&jc, arg, sizeof(jc)))
+		return -EFAULT;
+
+	if (jc.quality != 0 && jc.quality != 1)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	err += et61x251_set_compression(cam, &jc);
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
+		       "problems. To use the camera, close and open "
+		       "/dev/video%d again.", cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	cam->compression.quality = jc.quality;
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_reqbufs(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_requestbuffers rb;
+	u32 i;
+	int err;
+
+	if (copy_from_user(&rb, arg, sizeof(rb)))
+		return -EFAULT;
+
+	if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    rb.memory != V4L2_MEMORY_MMAP)
+		return -EINVAL;
+
+	if (cam->io == IO_READ) {
+		DBG(3, "Close and open the device again to choose the mmap "
+		       "I/O method");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++)
+		if (cam->frame[i].vma_use_count) {
+			DBG(3, "VIDIOC_REQBUFS failed. "
+			       "Previous buffers are still mapped.");
+			return -EINVAL;
+		}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	et61x251_empty_framequeues(cam);
+
+	et61x251_release_buffers(cam);
+	if (rb.count)
+		rb.count = et61x251_request_buffers(cam, rb.count, IO_MMAP);
+
+	if (copy_to_user(arg, &rb, sizeof(rb))) {
+		et61x251_release_buffers(cam);
+		cam->io = IO_NONE;
+		return -EFAULT;
+	}
+
+	cam->io = rb.count ? IO_MMAP : IO_NONE;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_querybuf(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
+
+	if (cam->frame[b.index].vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (cam->frame[b.index].state == F_DONE)
+		b.flags |= V4L2_BUF_FLAG_DONE;
+	else if (cam->frame[b.index].state != F_UNUSED)
+		b.flags |= V4L2_BUF_FLAG_QUEUED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_qbuf(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+	unsigned long lock_flags;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->frame[b.index].state != F_UNUSED)
+		return -EINVAL;
+
+	cam->frame[b.index].state = F_QUEUED;
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	PDBGG("Frame #%lu queued", (unsigned long)b.index);
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_dqbuf(struct et61x251_device* cam, struct file* filp,
+		      void __user * arg)
+{
+	struct v4l2_buffer b;
+	struct et61x251_frame_t *f;
+	unsigned long lock_flags;
+	long timeout;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->outqueue)) {
+		if (cam->stream == STREAM_OFF)
+			return -EINVAL;
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		timeout = wait_event_interruptible_timeout
+			  ( cam->wait_frame,
+			    (!list_empty(&cam->outqueue)) ||
+			    (cam->state & DEV_DISCONNECTED) ||
+			    (cam->state & DEV_MISCONFIGURED),
+			    cam->module_param.frame_timeout *
+			    1000 * msecs_to_jiffies(1) );
+		if (timeout < 0)
+			return timeout;
+		if (cam->state & DEV_DISCONNECTED)
+			return -ENODEV;
+		if (!timeout || (cam->state & DEV_MISCONFIGURED))
+			return -EIO;
+	}
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	f = list_entry(cam->outqueue.next, struct et61x251_frame_t, frame);
+	list_del(cam->outqueue.next);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	f->state = F_UNUSED;
+
+	memcpy(&b, &f->buf, sizeof(b));
+	if (f->vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_streamon(struct et61x251_device* cam, void __user * arg)
+{
+	int type;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->inqueue))
+		return -EINVAL;
+
+	cam->stream = STREAM_ON;
+
+	DBG(3, "Stream on");
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_streamoff(struct et61x251_device* cam, void __user * arg)
+{
+	int type, err;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	et61x251_empty_framequeues(cam);
+
+	DBG(3, "Stream off");
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_g_parm(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+	sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_s_parm(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+
+	if (sp.parm.capture.readbuffers == 0)
+		sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (sp.parm.capture.readbuffers > ET61X251_MAX_FRAMES)
+		sp.parm.capture.readbuffers = ET61X251_MAX_FRAMES;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	cam->nreadbuffers = sp.parm.capture.readbuffers;
+
+	return 0;
+}
+
+
+static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp,
+			       unsigned int cmd, void __user * arg)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+
+	switch (cmd) {
+
+	case VIDIOC_QUERYCAP:
+		return et61x251_vidioc_querycap(cam, arg);
+
+	case VIDIOC_ENUMINPUT:
+		return et61x251_vidioc_enuminput(cam, arg);
+
+	case VIDIOC_G_INPUT:
+		return et61x251_vidioc_g_input(cam, arg);
+
+	case VIDIOC_S_INPUT:
+		return et61x251_vidioc_s_input(cam, arg);
+
+	case VIDIOC_QUERYCTRL:
+		return et61x251_vidioc_query_ctrl(cam, arg);
+
+	case VIDIOC_G_CTRL:
+		return et61x251_vidioc_g_ctrl(cam, arg);
+
+	case VIDIOC_S_CTRL_OLD:
+	case VIDIOC_S_CTRL:
+		return et61x251_vidioc_s_ctrl(cam, arg);
+
+	case VIDIOC_CROPCAP_OLD:
+	case VIDIOC_CROPCAP:
+		return et61x251_vidioc_cropcap(cam, arg);
+
+	case VIDIOC_G_CROP:
+		return et61x251_vidioc_g_crop(cam, arg);
+
+	case VIDIOC_S_CROP:
+		return et61x251_vidioc_s_crop(cam, arg);
+
+	case VIDIOC_ENUM_FMT:
+		return et61x251_vidioc_enum_fmt(cam, arg);
+
+	case VIDIOC_G_FMT:
+		return et61x251_vidioc_g_fmt(cam, arg);
+
+	case VIDIOC_TRY_FMT:
+	case VIDIOC_S_FMT:
+		return et61x251_vidioc_try_s_fmt(cam, cmd, arg);
+
+	case VIDIOC_G_JPEGCOMP:
+		return et61x251_vidioc_g_jpegcomp(cam, arg);
+
+	case VIDIOC_S_JPEGCOMP:
+		return et61x251_vidioc_s_jpegcomp(cam, arg);
+
+	case VIDIOC_REQBUFS:
+		return et61x251_vidioc_reqbufs(cam, arg);
+
+	case VIDIOC_QUERYBUF:
+		return et61x251_vidioc_querybuf(cam, arg);
+
+	case VIDIOC_QBUF:
+		return et61x251_vidioc_qbuf(cam, arg);
+
+	case VIDIOC_DQBUF:
+		return et61x251_vidioc_dqbuf(cam, filp, arg);
+
+	case VIDIOC_STREAMON:
+		return et61x251_vidioc_streamon(cam, arg);
+
+	case VIDIOC_STREAMOFF:
+		return et61x251_vidioc_streamoff(cam, arg);
+
+	case VIDIOC_G_PARM:
+		return et61x251_vidioc_g_parm(cam, arg);
+
+	case VIDIOC_S_PARM_OLD:
+	case VIDIOC_S_PARM:
+		return et61x251_vidioc_s_parm(cam, arg);
+
+	case VIDIOC_G_STD:
+	case VIDIOC_S_STD:
+	case VIDIOC_QUERYSTD:
+	case VIDIOC_ENUMSTD:
+	case VIDIOC_QUERYMENU:
+		return -EINVAL;
+
+	default:
+		return -EINVAL;
+
+	}
+}
+
+
+static int et61x251_ioctl(struct inode* inode, struct file* filp,
+			 unsigned int cmd, unsigned long arg)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+	int err = 0;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	V4LDBG(3, "et61x251", cmd);
+
+	err = et61x251_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return err;
+}
+
+
+static struct file_operations et61x251_fops = {
+	.owner = THIS_MODULE,
+	.open =    et61x251_open,
+	.release = et61x251_release,
+	.ioctl =   et61x251_ioctl,
+	.read =    et61x251_read,
+	.poll =    et61x251_poll,
+	.mmap =    et61x251_mmap,
+	.llseek =  no_llseek,
+};
+
+/*****************************************************************************/
+
+/* It exists a single interface only. We do not need to validate anything. */
+static int
+et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct et61x251_device* cam;
+	static unsigned int dev_nr = 0;
+	unsigned int i;
+	int err = 0;
+
+	if (!(cam = kzalloc(sizeof(struct et61x251_device), GFP_KERNEL)))
+		return -ENOMEM;
+
+	cam->usbdev = udev;
+
+	if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
+		DBG(1, "kmalloc() failed");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	if (!(cam->v4ldev = video_device_alloc())) {
+		DBG(1, "video_device_alloc() failed");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	mutex_init(&cam->dev_mutex);
+
+	DBG(2, "ET61X[12]51 PC Camera Controller detected "
+	       "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct);
+
+	for  (i = 0; et61x251_sensor_table[i]; i++) {
+		err = et61x251_sensor_table[i](cam);
+		if (!err)
+			break;
+	}
+
+	if (!err)
+		DBG(2, "%s image sensor detected", cam->sensor.name);
+	else {
+		DBG(1, "No supported image sensor detected");
+		err = -ENODEV;
+		goto fail;
+	}
+
+	if (et61x251_init(cam)) {
+		DBG(1, "Initialization failed. I will retry on open().");
+		cam->state |= DEV_MISCONFIGURED;
+	}
+
+	strcpy(cam->v4ldev->name, "ET61X[12]51 PC Camera");
+	cam->v4ldev->owner = THIS_MODULE;
+	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
+	cam->v4ldev->hardware = 0;
+	cam->v4ldev->fops = &et61x251_fops;
+	cam->v4ldev->minor = video_nr[dev_nr];
+	cam->v4ldev->release = video_device_release;
+	video_set_drvdata(cam->v4ldev, cam);
+
+	mutex_lock(&cam->dev_mutex);
+
+	err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
+				    video_nr[dev_nr]);
+	if (err) {
+		DBG(1, "V4L2 device registration failed");
+		if (err == -ENFILE && video_nr[dev_nr] == -1)
+			DBG(1, "Free /dev/videoX node not found");
+		video_nr[dev_nr] = -1;
+		dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
+		mutex_unlock(&cam->dev_mutex);
+		goto fail;
+	}
+
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+
+	cam->module_param.force_munmap = force_munmap[dev_nr];
+	cam->module_param.frame_timeout = frame_timeout[dev_nr];
+
+	dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	et61x251_create_sysfs(cam);
+	DBG(2, "Optional device control through 'sysfs' interface ready");
+#endif
+
+	usb_set_intfdata(intf, cam);
+
+	mutex_unlock(&cam->dev_mutex);
+
+	return 0;
+
+fail:
+	if (cam) {
+		kfree(cam->control_buffer);
+		if (cam->v4ldev)
+			video_device_release(cam->v4ldev);
+		kfree(cam);
+	}
+	return err;
+}
+
+
+static void et61x251_usb_disconnect(struct usb_interface* intf)
+{
+	struct et61x251_device* cam = usb_get_intfdata(intf);
+
+	if (!cam)
+		return;
+
+	down_write(&et61x251_disconnect);
+
+	mutex_lock(&cam->dev_mutex);
+
+	DBG(2, "Disconnecting %s...", cam->v4ldev->name);
+
+	wake_up_interruptible_all(&cam->open);
+
+	if (cam->users) {
+		DBG(2, "Device /dev/video%d is open! Deregistration and "
+		       "memory deallocation are deferred on close.",
+		    cam->v4ldev->minor);
+		cam->state |= DEV_MISCONFIGURED;
+		et61x251_stop_transfer(cam);
+		cam->state |= DEV_DISCONNECTED;
+		wake_up_interruptible(&cam->wait_frame);
+		wake_up(&cam->wait_stream);
+		usb_get_dev(cam->usbdev);
+	} else {
+		cam->state |= DEV_DISCONNECTED;
+		et61x251_release_resources(cam);
+	}
+
+	mutex_unlock(&cam->dev_mutex);
+
+	if (!cam->users)
+		kfree(cam);
+
+	up_write(&et61x251_disconnect);
+}
+
+
+static struct usb_driver et61x251_usb_driver = {
+	.name =       "et61x251",
+	.id_table =   et61x251_id_table,
+	.probe =      et61x251_usb_probe,
+	.disconnect = et61x251_usb_disconnect,
+};
+
+/*****************************************************************************/
+
+static int __init et61x251_module_init(void)
+{
+	int err = 0;
+
+	KDBG(2, ET61X251_MODULE_NAME " v" ET61X251_MODULE_VERSION);
+	KDBG(3, ET61X251_MODULE_AUTHOR);
+
+	if ((err = usb_register(&et61x251_usb_driver)))
+		KDBG(1, "usb_register() failed");
+
+	return err;
+}
+
+
+static void __exit et61x251_module_exit(void)
+{
+	usb_deregister(&et61x251_usb_driver);
+}
+
+
+module_init(et61x251_module_init);
+module_exit(et61x251_module_exit);
diff --git a/drivers/media/video/et61x251/et61x251_sensor.h b/drivers/media/video/et61x251/et61x251_sensor.h
new file mode 100644
index 000000000000..65edd08dc386
--- /dev/null
+++ b/drivers/media/video/et61x251/et61x251_sensor.h
@@ -0,0 +1,116 @@
+/***************************************************************************
+ * API for image sensors connected to ET61X[12]51 PC Camera Controllers    *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _ET61X251_SENSOR_H_
+#define _ET61X251_SENSOR_H_
+
+#include <linux/usb.h>
+#include <linux/videodev.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <asm/types.h>
+
+struct et61x251_device;
+struct et61x251_sensor;
+
+/*****************************************************************************/
+
+extern int et61x251_probe_tas5130d1b(struct et61x251_device* cam);
+
+#define ET61X251_SENSOR_TABLE                                                 \
+/* Weak detections must go at the end of the list */                          \
+static int (*et61x251_sensor_table[])(struct et61x251_device*) = {            \
+	&et61x251_probe_tas5130d1b,                                           \
+	NULL,                                                                 \
+};
+
+extern struct et61x251_device*
+et61x251_match_id(struct et61x251_device* cam, const struct usb_device_id *id);
+
+extern void
+et61x251_attach_sensor(struct et61x251_device* cam,
+		       struct et61x251_sensor* sensor);
+
+/*****************************************************************************/
+
+extern int et61x251_write_reg(struct et61x251_device*, u8 value, u16 index);
+extern int et61x251_read_reg(struct et61x251_device*, u16 index);
+extern int et61x251_i2c_write(struct et61x251_device*, u8 address, u8 value);
+extern int et61x251_i2c_read(struct et61x251_device*, u8 address);
+extern int et61x251_i2c_try_write(struct et61x251_device*,
+				  struct et61x251_sensor*, u8 address,
+				  u8 value);
+extern int et61x251_i2c_try_read(struct et61x251_device*,
+				 struct et61x251_sensor*, u8 address);
+extern int et61x251_i2c_raw_write(struct et61x251_device*, u8 n, u8 data1,
+				  u8 data2, u8 data3, u8 data4, u8 data5,
+				  u8 data6, u8 data7, u8 data8, u8 address);
+
+/*****************************************************************************/
+
+enum et61x251_i2c_sysfs_ops {
+	ET61X251_I2C_READ = 0x01,
+	ET61X251_I2C_WRITE = 0x02,
+};
+
+enum et61x251_i2c_interface {
+	ET61X251_I2C_2WIRES,
+	ET61X251_I2C_3WIRES,
+};
+
+/* Repeat start condition when RSTA is high */
+enum et61x251_i2c_rsta {
+	ET61X251_I2C_RSTA_STOP = 0x00, /* stop then start */
+	ET61X251_I2C_RSTA_REPEAT = 0x01, /* repeat start */
+};
+
+#define ET61X251_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
+
+struct et61x251_sensor {
+	char name[32];
+
+	enum et61x251_i2c_sysfs_ops sysfs_ops;
+
+	enum et61x251_i2c_interface interface;
+	u8 i2c_slave_id;
+	enum et61x251_i2c_rsta rsta;
+	struct v4l2_rect active_pixel; /* left and top define FVSX and FVSY */
+
+	struct v4l2_queryctrl qctrl[ET61X251_MAX_CTRLS];
+	struct v4l2_cropcap cropcap;
+	struct v4l2_pix_format pix_format;
+
+	int (*init)(struct et61x251_device* cam);
+	int (*get_ctrl)(struct et61x251_device* cam,
+			struct v4l2_control* ctrl);
+	int (*set_ctrl)(struct et61x251_device* cam,
+			const struct v4l2_control* ctrl);
+	int (*set_crop)(struct et61x251_device* cam,
+			const struct v4l2_rect* rect);
+	int (*set_pix_format)(struct et61x251_device* cam,
+			      const struct v4l2_pix_format* pix);
+
+	/* Private */
+	struct v4l2_queryctrl _qctrl[ET61X251_MAX_CTRLS];
+	struct v4l2_rect _rect;
+};
+
+#endif /* _ET61X251_SENSOR_H_ */
diff --git a/drivers/media/video/et61x251/et61x251_tas5130d1b.c b/drivers/media/video/et61x251/et61x251_tas5130d1b.c
new file mode 100644
index 000000000000..a7d65b82b2fb
--- /dev/null
+++ b/drivers/media/video/et61x251/et61x251_tas5130d1b.c
@@ -0,0 +1,141 @@
+/***************************************************************************
+ * Plug-in for TAS5130D1B image sensor connected to the ET61X[12]51        *
+ * PC Camera Controllers                                                   *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "et61x251_sensor.h"
+
+
+static int tas5130d1b_init(struct et61x251_device* cam)
+{
+	int err = 0;
+
+	err += et61x251_write_reg(cam, 0x14, 0x01);
+	err += et61x251_write_reg(cam, 0x1b, 0x02);
+	err += et61x251_write_reg(cam, 0x02, 0x12);
+	err += et61x251_write_reg(cam, 0x0e, 0x60);
+	err += et61x251_write_reg(cam, 0x80, 0x61);
+	err += et61x251_write_reg(cam, 0xf0, 0x62);
+	err += et61x251_write_reg(cam, 0x03, 0x63);
+	err += et61x251_write_reg(cam, 0x14, 0x64);
+	err += et61x251_write_reg(cam, 0xf4, 0x65);
+	err += et61x251_write_reg(cam, 0x01, 0x66);
+	err += et61x251_write_reg(cam, 0x05, 0x67);
+	err += et61x251_write_reg(cam, 0x8f, 0x68);
+	err += et61x251_write_reg(cam, 0x0f, 0x8d);
+	err += et61x251_write_reg(cam, 0x08, 0x8e);
+
+	return err;
+}
+
+
+static int tas5130d1b_set_ctrl(struct et61x251_device* cam,
+			       const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		err += et61x251_i2c_raw_write(cam, 2, 0x20,
+					      0xf6-ctrl->value, 0, 0, 0,
+					      0, 0, 0, 0);
+		break;
+	case V4L2_CID_EXPOSURE:
+		err += et61x251_i2c_raw_write(cam, 2, 0x40,
+					      0x47-ctrl->value, 0, 0, 0,
+					      0, 0, 0, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err ? -EIO : 0;
+}
+
+
+static struct et61x251_sensor tas5130d1b = {
+	.name = "TAS5130D1B",
+	.interface = ET61X251_I2C_3WIRES,
+	.rsta = ET61X251_I2C_RSTA_STOP,
+	.active_pixel = {
+		.left = 106,
+		.top = 13,
+	},
+	.init = &tas5130d1b_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0xf6,
+			.step = 0x02,
+			.default_value = 0x0d,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x00,
+			.maximum = 0x47,
+			.step = 0x01,
+			.default_value = 0x23,
+			.flags = 0,
+		},
+	},
+	.set_ctrl = &tas5130d1b_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+};
+
+
+int et61x251_probe_tas5130d1b(struct et61x251_device* cam)
+{
+	const struct usb_device_id tas5130d1b_id_table[] = {
+		{ USB_DEVICE(0x102c, 0x6251), },
+		{ }
+	};
+
+	/* Sensor detection is based on USB pid/vid */
+	if (!et61x251_match_id(cam, tas5130d1b_id_table))
+		return -ENODEV;
+
+	et61x251_attach_sensor(cam, &tas5130d1b);
+
+	return 0;
+}
diff --git a/drivers/media/video/font.h b/drivers/media/video/font.h
new file mode 100644
index 000000000000..8b1fecc37599
--- /dev/null
+++ b/drivers/media/video/font.h
@@ -0,0 +1,407 @@
+static unsigned char rom8x16_bits[] = {
+/* Character 0 (0x30):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   | *****  |
+   |**   ** |
+   |**   ** |
+   |**  *** |
+   |** **** |
+   |**** ** |
+   |***  ** |
+   |**   ** |
+   |**   ** |
+   | *****  |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0x7c,
+0xc6,
+0xc6,
+0xce,
+0xde,
+0xf6,
+0xe6,
+0xc6,
+0xc6,
+0x7c,
+0x00,
+0x00,
+0x00,
+0x00,
+
+/* Character 1 (0x31):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   |   **   |
+   | ****   |
+   |   **   |
+   |   **   |
+   |   **   |
+   |   **   |
+   |   **   |
+   |   **   |
+   |   **   |
+   | ****** |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0x18,
+0x78,
+0x18,
+0x18,
+0x18,
+0x18,
+0x18,
+0x18,
+0x18,
+0x7e,
+0x00,
+0x00,
+0x00,
+0x00,
+
+/* Character 2 (0x32):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   | *****  |
+   |**   ** |
+   |**   ** |
+   |     ** |
+   |    **  |
+   |   **   |
+   |  **    |
+   | **     |
+   |**   ** |
+   |******* |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0x7c,
+0xc6,
+0xc6,
+0x06,
+0x0c,
+0x18,
+0x30,
+0x60,
+0xc6,
+0xfe,
+0x00,
+0x00,
+0x00,
+0x00,
+
+/* Character 3 (0x33):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   | *****  |
+   |**   ** |
+   |     ** |
+   |     ** |
+   |  ****  |
+   |     ** |
+   |     ** |
+   |     ** |
+   |**   ** |
+   | *****  |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0x7c,
+0xc6,
+0x06,
+0x06,
+0x3c,
+0x06,
+0x06,
+0x06,
+0xc6,
+0x7c,
+0x00,
+0x00,
+0x00,
+0x00,
+
+/* Character 4 (0x34):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   |    **  |
+   |   ***  |
+   |  ****  |
+   | ** **  |
+   |**  **  |
+   |**  **  |
+   |******* |
+   |    **  |
+   |    **  |
+   |   **** |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0x0c,
+0x1c,
+0x3c,
+0x6c,
+0xcc,
+0xcc,
+0xfe,
+0x0c,
+0x0c,
+0x1e,
+0x00,
+0x00,
+0x00,
+0x00,
+
+/* Character 5 (0x35):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   |******* |
+   |**      |
+   |**      |
+   |**      |
+   |******  |
+   |     ** |
+   |     ** |
+   |     ** |
+   |**   ** |
+   | *****  |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0xfe,
+0xc0,
+0xc0,
+0xc0,
+0xfc,
+0x06,
+0x06,
+0x06,
+0xc6,
+0x7c,
+0x00,
+0x00,
+0x00,
+0x00,
+
+/* Character 6 (0x36):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   | *****  |
+   |**   ** |
+   |**      |
+   |**      |
+   |******  |
+   |**   ** |
+   |**   ** |
+   |**   ** |
+   |**   ** |
+   | *****  |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0x7c,
+0xc6,
+0xc0,
+0xc0,
+0xfc,
+0xc6,
+0xc6,
+0xc6,
+0xc6,
+0x7c,
+0x00,
+0x00,
+0x00,
+0x00,
+
+/* Character 7 (0x37):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   |******* |
+   |**   ** |
+   |     ** |
+   |    **  |
+   |   **   |
+   |  **    |
+   |  **    |
+   |  **    |
+   |  **    |
+   |  **    |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0xfe,
+0xc6,
+0x06,
+0x0c,
+0x18,
+0x30,
+0x30,
+0x30,
+0x30,
+0x30,
+0x00,
+0x00,
+0x00,
+0x00,
+
+/* Character 8 (0x38):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   | *****  |
+   |**   ** |
+   |**   ** |
+   |**   ** |
+   | *****  |
+   |**   ** |
+   |**   ** |
+   |**   ** |
+   |**   ** |
+   | *****  |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0x7c,
+0xc6,
+0xc6,
+0xc6,
+0x7c,
+0xc6,
+0xc6,
+0xc6,
+0xc6,
+0x7c,
+0x00,
+0x00,
+0x00,
+0x00,
+
+/* Character 9 (0x39):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   | *****  |
+   |**   ** |
+   |**   ** |
+   |**   ** |
+   |**   ** |
+   | ****** |
+   |     ** |
+   |     ** |
+   |**   ** |
+   | *****  |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0x7c,
+0xc6,
+0xc6,
+0xc6,
+0xc6,
+0x7e,
+0x06,
+0x06,
+0xc6,
+0x7c,
+0x00,
+0x00,
+0x00,
+0x00,
+/* Character : (0x3a):
+   ht=16, width=8
+   +--------+
+   |        |
+   |        |
+   |        |
+   |        |
+   |        |
+   |    **  |
+   |    **  |
+   |        |
+   |        |
+   |    **  |
+   |    **  |
+   |        |
+   |        |
+   |        |
+   |        |
+   |        |
+   +--------+ */
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+0x0c,
+0x0c,
+0x00,
+0x00,
+0x0c,
+0x0c,
+0x00,
+0x00,
+0x00,
+0x00,
+0x00,
+};
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 11ea9765769c..c40e8ba9a2ea 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -53,10 +53,11 @@
 #include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
+#include <media/tvaudio.h>
+#include <media/msp3400.h>
 #include <linux/kthread.h>
 #include <linux/suspend.h>
-#include "msp3400.h"
+#include "msp3400-driver.h"
 
 /* ---------------------------------------------------------------------- */
 
@@ -245,31 +246,31 @@ int msp_write_dsp(struct i2c_client *client, int addr, int val)
  * ----------------------------------------------------------------------- */
 
 static int scarts[3][9] = {
-	/* MASK    IN1     IN2     IN1_DA  IN2_DA  IN3     IN4     MONO    MUTE   */
+       /* MASK   IN1     IN2     IN3     IN4     IN1_DA  IN2_DA  MONO    MUTE   */
 	/* SCART DSP Input select */
-	{ 0x0320, 0x0000, 0x0200, -1,     -1,     0x0300, 0x0020, 0x0100, 0x0320 },
+       { 0x0320, 0x0000, 0x0200, 0x0300, 0x0020, -1,     -1,     0x0100, 0x0320 },
 	/* SCART1 Output select */
-	{ 0x0c40, 0x0440, 0x0400, 0x0c00, 0x0040, 0x0000, 0x0840, 0x0800, 0x0c40 },
+       { 0x0c40, 0x0440, 0x0400, 0x0000, 0x0840, 0x0c00, 0x0040, 0x0800, 0x0c40 },
 	/* SCART2 Output select */
-	{ 0x3080, 0x1000, 0x1080, 0x0000, 0x0080, 0x2080, 0x3080, 0x2000, 0x3000 },
+       { 0x3080, 0x1000, 0x1080, 0x2080, 0x3080, 0x0000, 0x0080, 0x2000, 0x3000 },
 };
 
 static char *scart_names[] = {
-	"mask", "in1", "in2", "in1 da", "in2 da", "in3", "in4", "mono", "mute"
+       "in1", "in2", "in3", "in4", "in1 da", "in2 da", "mono", "mute"
 };
 
 void msp_set_scart(struct i2c_client *client, int in, int out)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
 
-	state->in_scart=in;
+	state->in_scart = in;
 
-	if (in >= 1 && in <= 8 && out >= 0 && out <= 2) {
-		if (-1 == scarts[out][in])
+	if (in >= 0 && in <= 7 && out >= 0 && out <= 2) {
+		if (-1 == scarts[out][in + 1])
 			return;
 
-		state->acb &= ~scarts[out][SCART_MASK];
-		state->acb |=  scarts[out][in];
+		state->acb &= ~scarts[out][0];
+		state->acb |=  scarts[out][in + 1];
 	} else
 		state->acb = 0xf60; /* Mute Input and SCART 1 Output */
 
@@ -336,37 +337,6 @@ void msp_set_audio(struct i2c_client *client)
 	msp_write_dsp(client, 0x0033, loudness);
 }
 
-int msp_modus(struct i2c_client *client)
-{
-	struct msp_state *state = i2c_get_clientdata(client);
-
-	if (state->radio) {
-		v4l_dbg(1, msp_debug, client, "video mode selected to Radio\n");
-		return 0x0003;
-	}
-
-	if (state->v4l2_std & V4L2_STD_PAL) {
-		v4l_dbg(1, msp_debug, client, "video mode selected to PAL\n");
-
-#if 1
-		/* experimental: not sure this works with all chip versions */
-		return 0x7003;
-#else
-		/* previous value, try this if it breaks ... */
-		return 0x1003;
-#endif
-	}
-	if (state->v4l2_std & V4L2_STD_NTSC) {
-		v4l_dbg(1, msp_debug, client, "video mode selected to NTSC\n");
-		return 0x2003;
-	}
-	if (state->v4l2_std & V4L2_STD_SECAM) {
-		v4l_dbg(1, msp_debug, client, "video mode selected to SECAM\n");
-		return 0x0003;
-	}
-	return 0x0003;
-}
-
 /* ------------------------------------------------------------------------ */
 
 
@@ -585,51 +555,11 @@ static int msp_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
 static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
-	u16 *sarg = arg;
-	int scart = 0;
 
 	if (msp_debug >= 2)
 		v4l_i2c_print_ioctl(client, cmd);
 
 	switch (cmd) {
-	case AUDC_SET_INPUT:
-		if (*sarg == state->input)
-			break;
-		state->input = *sarg;
-		switch (*sarg) {
-		case AUDIO_RADIO:
-			/* Hauppauge uses IN2 for the radio */
-			state->mode = MSP_MODE_FM_RADIO;
-			scart       = SCART_IN2;
-			break;
-		case AUDIO_EXTERN_1:
-			/* IN1 is often used for external input ... */
-			state->mode = MSP_MODE_EXTERN;
-			scart       = SCART_IN1;
-			break;
-		case AUDIO_EXTERN_2:
-			/* ... sometimes it is IN2 through ;) */
-			state->mode = MSP_MODE_EXTERN;
-			scart       = SCART_IN2;
-			break;
-		case AUDIO_TUNER:
-			state->mode = -1;
-			break;
-		default:
-			if (*sarg & AUDIO_MUTE)
-				msp_set_scart(client, SCART_MUTE, 0);
-			break;
-		}
-		if (scart) {
-			state->rxsubchans = V4L2_TUNER_SUB_STEREO;
-			msp_set_scart(client, scart, 0);
-			msp_write_dsp(client, 0x000d, 0x1900);
-			if (state->opmode != OPMODE_AUTOSELECT)
-				msp_set_audmode(client);
-		}
-		msp_wake_thread(client);
-		break;
-
 	case AUDC_SET_RADIO:
 		if (state->radio)
 			return 0;
@@ -692,6 +622,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 
 		if (va->mode != 0 && state->radio == 0) {
 			state->audmode = msp_mode_v4l1_to_v4l2(va->mode);
+			msp_set_audmode(client);
 		}
 		break;
 	}
@@ -728,15 +659,6 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 		break;
 	}
 
-	/* msp34xx specific */
-	case MSP_SET_MATRIX:
-	{
-		struct msp_matrix *mspm = arg;
-
-		msp_set_scart(client, mspm->input, mspm->output);
-		break;
-	}
-
 	/* --- v4l2 ioctls --- */
 	case VIDIOC_S_STD:
 	{
@@ -750,90 +672,34 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 		return 0;
 	}
 
-	case VIDIOC_ENUMINPUT:
-	{
-		struct v4l2_input *i = arg;
-
-		if (i->index != 0)
-			return -EINVAL;
-
-		i->type = V4L2_INPUT_TYPE_TUNER;
-		switch (i->index) {
-		case AUDIO_RADIO:
-			strcpy(i->name, "Radio");
-			break;
-		case AUDIO_EXTERN_1:
-			strcpy(i->name, "Extern 1");
-			break;
-		case AUDIO_EXTERN_2:
-			strcpy(i->name, "Extern 2");
-			break;
-		case AUDIO_TUNER:
-			strcpy(i->name, "Television");
-			break;
-		default:
-			return -EINVAL;
-		}
-		return 0;
-	}
-
-	case VIDIOC_G_AUDIO:
+	case VIDIOC_INT_G_AUDIO_ROUTING:
 	{
-		struct v4l2_audio *a = arg;
+		struct v4l2_routing *rt = arg;
 
-		memset(a, 0, sizeof(*a));
-
-		switch (a->index) {
-		case AUDIO_RADIO:
-			strcpy(a->name, "Radio");
-			break;
-		case AUDIO_EXTERN_1:
-			strcpy(a->name, "Extern 1");
-			break;
-		case AUDIO_EXTERN_2:
-			strcpy(a->name, "Extern 2");
-			break;
-		case AUDIO_TUNER:
-			strcpy(a->name, "Television");
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		a->capability = V4L2_AUDCAP_STEREO;
-		a->mode = 0;  /* TODO: add support for AVL */
+		*rt = state->routing;
 		break;
 	}
 
-	case VIDIOC_S_AUDIO:
+	case VIDIOC_INT_S_AUDIO_ROUTING:
 	{
-		struct v4l2_audio *sarg = arg;
-
-		switch (sarg->index) {
-		case AUDIO_RADIO:
-			/* Hauppauge uses IN2 for the radio */
-			state->mode = MSP_MODE_FM_RADIO;
-			scart       = SCART_IN2;
-			break;
-		case AUDIO_EXTERN_1:
-			/* IN1 is often used for external input ... */
-			state->mode = MSP_MODE_EXTERN;
-			scart       = SCART_IN1;
-			break;
-		case AUDIO_EXTERN_2:
-			/* ... sometimes it is IN2 through ;) */
-			state->mode = MSP_MODE_EXTERN;
-			scart       = SCART_IN2;
-			break;
-		case AUDIO_TUNER:
-			state->mode = -1;
-			break;
-		}
-		if (scart) {
-			state->rxsubchans = V4L2_TUNER_SUB_STEREO;
-			msp_set_scart(client, scart, 0);
-			msp_write_dsp(client, 0x000d, 0x1900);
+		struct v4l2_routing *rt = arg;
+		int tuner = (rt->input >> 3) & 1;
+		int sc_in = rt->input & 0x7;
+		int sc1_out = rt->output & 0xf;
+		int sc2_out = (rt->output >> 4) & 0xf;
+		u16 val;
+
+		state->routing = *rt;
+		if (state->opmode == OPMODE_AUTOSELECT) {
+			val = msp_read_dem(client, 0x30) & ~0x100;
+			msp_write_dem(client, 0x30, val | (tuner ? 0x100 : 0));
+		} else {
+			val = msp_read_dem(client, 0xbb) & ~0x100;
+			msp_write_dem(client, 0xbb, val | (tuner ? 0x100 : 0));
 		}
+		msp_set_scart(client, sc_in, 0);
+		msp_set_scart(client, sc1_out, 1);
+		msp_set_scart(client, sc2_out, 2);
 		msp_set_audmode(client);
 		msp_wake_thread(client);
 		break;
@@ -866,42 +732,6 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 		break;
 	}
 
-	case VIDIOC_G_AUDOUT:
-	{
-		struct v4l2_audioout *a = (struct v4l2_audioout *)arg;
-		int idx = a->index;
-
-		memset(a, 0, sizeof(*a));
-
-		switch (idx) {
-		case 0:
-			strcpy(a->name, "Scart1 Out");
-			break;
-		case 1:
-			strcpy(a->name, "Scart2 Out");
-			break;
-		case 2:
-			strcpy(a->name, "I2S Out");
-			break;
-		default:
-			return -EINVAL;
-		}
-		break;
-	}
-
-	case VIDIOC_S_AUDOUT:
-	{
-		struct v4l2_audioout *a = (struct v4l2_audioout *)arg;
-
-		if (a->index < 0 || a->index > 2)
-			return -EINVAL;
-
-		v4l_dbg(1, msp_debug, client, "Setting audio out on msp34xx to input %i\n", a->index);
-		msp_set_scart(client, state->in_scart, a->index + 1);
-
-		break;
-	}
-
 	case VIDIOC_INT_I2S_CLOCK_FREQ:
 	{
 		u32 *a = (u32 *)arg;
@@ -979,12 +809,16 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 				(state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono",
 				(state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : "");
 		} else {
-			v4l_info(client, "Mode:     %s\n", p);
+			if (state->opmode == OPMODE_AUTODETECT)
+				v4l_info(client, "Mode:     %s\n", p);
 			v4l_info(client, "Standard: %s (%s%s)\n",
 				msp_standard_std_name(state->std),
 				(state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono",
 				(state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : "");
 		}
+		v4l_info(client, "Audmode:  0x%04x\n", state->audmode);
+		v4l_info(client, "Routing:  0x%08x (input) 0x%08x (output)\n",
+				state->routing.input, state->routing.output);
 		v4l_info(client, "ACB:      0x%04x\n", state->acb);
 		break;
 	}
@@ -1063,6 +897,9 @@ static int msp_attach(struct i2c_adapter *adapter, int address, int kind)
 	state->muted = 0;
 	state->i2s_mode = 0;
 	init_waitqueue_head(&state->wq);
+	/* These are the reset input/output positions */
+	state->routing.input = MSP_INPUT_DEFAULT;
+	state->routing.output = MSP_OUTPUT_DEFAULT;
 
 	state->rev1 = msp_read_dsp(client, 0x1e);
 	if (state->rev1 != -1)
diff --git a/drivers/media/video/msp3400.h b/drivers/media/video/msp3400-driver.h
index 6fb5c8c994e7..1940748bb633 100644
--- a/drivers/media/video/msp3400.h
+++ b/drivers/media/video/msp3400-driver.h
@@ -1,8 +1,10 @@
 /*
  */
 
-#ifndef MSP3400_H
-#define MSP3400_H
+#ifndef MSP3400_DRIVER_H
+#define MSP3400_DRIVER_H
+
+#include <media/msp3400.h>
 
 /* ---------------------------------------------------------------------- */
 
@@ -20,15 +22,14 @@
 #define MSP_MODE_BTSC        8
 #define MSP_MODE_EXTERN      9
 
-#define SCART_MASK    0
-#define SCART_IN1     1
-#define SCART_IN2     2
-#define SCART_IN1_DA  3
-#define SCART_IN2_DA  4
-#define SCART_IN3     5
-#define SCART_IN4     6
-#define SCART_MONO    7
-#define SCART_MUTE    8
+#define SCART_IN1     0
+#define SCART_IN2     1
+#define SCART_IN3     2
+#define SCART_IN4     3
+#define SCART_IN1_DA  4
+#define SCART_IN2_DA  5
+#define SCART_MONO    6
+#define SCART_MUTE    7
 
 #define SCART_DSP_IN  0
 #define SCART1_OUT    1
@@ -73,7 +74,7 @@ struct msp_state {
 	int i2s_mode;
 	int main, second;	/* sound carrier */
 	int input;
-	int source;             /* see msp34xxg_set_source */
+	struct v4l2_routing routing;
 
 	/* v4l2 */
 	int audmode;
@@ -99,17 +100,16 @@ int msp_reset(struct i2c_client *client);
 void msp_set_scart(struct i2c_client *client, int in, int out);
 void msp_set_mute(struct i2c_client *client);
 void msp_set_audio(struct i2c_client *client);
-int msp_modus(struct i2c_client *client);
 int msp_sleep(struct msp_state *state, int timeout);
 
 /* msp3400-kthreads.c */
 const char *msp_standard_std_name(int std);
 void msp_set_audmode(struct i2c_client *client);
-void msp_detect_stereo(struct i2c_client *client);
+int msp_detect_stereo(struct i2c_client *client);
 int msp3400c_thread(void *data);
 int msp3410d_thread(void *data);
 int msp34xxg_thread(void *data);
 void msp3400c_set_mode(struct i2c_client *client, int mode);
 void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2);
 
-#endif /* MSP3400_H */
+#endif /* MSP3400_DRIVER_H */
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index 852ab6a115fa..c3984ea9ca07 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -26,10 +26,10 @@
 #include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
+#include <media/msp3400.h>
 #include <linux/kthread.h>
 #include <linux/suspend.h>
-#include "msp3400.h"
+#include "msp3400-driver.h"
 
 /* this one uses the automatic sound standard detection of newer msp34xx
    chip versions */
@@ -45,11 +45,13 @@ static struct {
 	{ 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), "6.5/6.25  D/K1 Dual FM-Stereo" },
 	{ 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), "6.5/6.74  D/K2 Dual FM-Stereo" },
 	{ 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5  D/K FM-Mono (HDEV3)" },
+	{ 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875), "6.5/5.74  D/K3 Dual FM-Stereo" },
 	{ 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), "5.5/5.85  B/G NICAM FM" },
 	{ 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85  L NICAM AM" },
 	{ 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), "6.0/6.55  I NICAM FM" },
 	{ 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85  D/K NICAM FM" },
 	{ 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85  D/K NICAM FM (HDEV2)" },
+	{ 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85  D/K NICAM FM (HDEV3)" },
 	{ 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5  M BTSC-Stereo" },
 	{ 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5  M BTSC-Mono + SAP" },
 	{ 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5  M EIA-J Japan Stereo" },
@@ -185,13 +187,14 @@ void msp3400c_set_mode(struct i2c_client *client, int mode)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
 	struct msp3400c_init_data_dem *data = &msp3400c_init_data[mode];
+	int tuner = (state->routing.input >> 3) & 1;
 	int i;
 
 	v4l_dbg(1, msp_debug, client, "set_mode: %d\n", mode);
 	state->mode = mode;
 	state->rxsubchans = V4L2_TUNER_SUB_MONO;
 
-	msp_write_dem(client, 0x00bb, data->ad_cv);
+	msp_write_dem(client, 0x00bb, data->ad_cv | (tuner ? 0x100 : 0));
 
 	for (i = 5; i >= 0; i--)               /* fir 1 */
 		msp_write_dem(client, 0x0001, data->fir1[i]);
@@ -207,21 +210,22 @@ void msp3400c_set_mode(struct i2c_client *client, int mode)
 	msp3400c_set_carrier(client, data->cdo1, data->cdo2);
 
 	msp_set_source(client, data->dsp_src);
-	msp_write_dsp(client, 0x000e, data->dsp_matrix);
+	/* set prescales */
 
-	if (state->has_nicam) {
-		/* nicam prescale */
-		msp_write_dsp(client, 0x0010, 0x5a00); /* was: 0x3000 */
-	}
+	/* volume prescale for SCART (AM mono input) */
+	msp_write_dsp(client, 0x000d, 0x1900);
+	msp_write_dsp(client, 0x000e, data->dsp_matrix);
+	if (state->has_nicam) /* nicam prescale */
+		msp_write_dsp(client, 0x0010, 0x5a00);
 }
 
 /* Set audio mode. Note that the pre-'G' models do not support BTSC+SAP,
    nor do they support stereo BTSC. */
 static void msp3400c_set_audmode(struct i2c_client *client)
 {
-	static char *strmode[] = { "mono", "stereo", "lang2", "lang1" };
+	static char *strmode[] = { "mono", "stereo", "lang2", "lang1", "lang1+lang2" };
 	struct msp_state *state = i2c_get_clientdata(client);
-	char *modestr = (state->audmode >= 0 && state->audmode < 4) ?
+	char *modestr = (state->audmode >= 0 && state->audmode < 5) ?
 		strmode[state->audmode] : "unknown";
 	int src = 0;	/* channel source: FM/AM, nicam or SCART */
 
@@ -246,6 +250,7 @@ static void msp3400c_set_audmode(struct i2c_client *client)
 		case V4L2_TUNER_MODE_MONO:
 		case V4L2_TUNER_MODE_LANG1:
 		case V4L2_TUNER_MODE_LANG2:
+		case V4L2_TUNER_MODE_LANG1_LANG2:
 			msp_write_dsp(client, 0x000e, 0x3000);
 			break;
 		}
@@ -257,6 +262,7 @@ static void msp3400c_set_audmode(struct i2c_client *client)
 			msp3400c_set_carrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
 			break;
 		case V4L2_TUNER_MODE_STEREO:
+		case V4L2_TUNER_MODE_LANG1_LANG2:
 			msp3400c_set_carrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02));
 			break;
 		case V4L2_TUNER_MODE_LANG1:
@@ -271,7 +277,6 @@ static void msp3400c_set_audmode(struct i2c_client *client)
 	case MSP_MODE_FM_NICAM2:
 	case MSP_MODE_AM_NICAM:
 		v4l_dbg(1, msp_debug, client, "NICAM set_audmode: %s\n",modestr);
-		msp3400c_set_carrier(client, state->second, state->main);
 		if (state->nicam_on)
 			src = 0x0100;  /* NICAM */
 		break;
@@ -293,6 +298,7 @@ static void msp3400c_set_audmode(struct i2c_client *client)
 	/* switch audio */
 	switch (state->audmode) {
 	case V4L2_TUNER_MODE_STEREO:
+	case V4L2_TUNER_MODE_LANG1_LANG2:
 		src |= 0x0020;
 		break;
 	case V4L2_TUNER_MODE_MONO:
@@ -427,8 +433,8 @@ static void watch_stereo(struct i2c_client *client)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
 
-	if (msp3400c_detect_stereo(client)) {
-		msp3400c_set_audmode(client);
+	if (msp_detect_stereo(client)) {
+		msp_set_audmode(client);
 	}
 
 	if (msp_once)
@@ -464,7 +470,7 @@ int msp3400c_thread(void *data)
 
 		/* mute */
 		msp_set_mute(client);
-		msp3400c_set_mode(client, MSP_MODE_AM_DETECT /* +1 */ );
+		msp3400c_set_mode(client, MSP_MODE_AM_DETECT);
 		val1 = val2 = 0;
 		max1 = max2 = -1;
 		state->watch_stereo = 0;
@@ -572,8 +578,6 @@ int msp3400c_thread(void *data)
 				state->second = msp3400c_carrier_detect_65[max2].cdo;
 				msp3400c_set_mode(client, MSP_MODE_AM_NICAM);
 				msp3400c_set_carrier(client, state->second, state->main);
-				/* volume prescale for SCART (AM mono input) */
-				msp_write_dsp(client, 0x000d, 0x1900);
 				state->watch_stereo = 1;
 			} else if (max2 == 0 && state->has_nicam) {
 				/* D/K NICAM */
@@ -651,7 +655,8 @@ int msp3410d_thread(void *data)
 		if (msp_sleep(state,200))
 			goto restart;
 
-		/* start autodetect */
+		/* start autodetect. Note: autodetect is not supported for
+		   NTSC-M and radio, hence we force the standard in those cases. */
 		if (state->radio)
 			std = 0x40;
 		else
@@ -695,23 +700,19 @@ int msp3410d_thread(void *data)
 			v4l_dbg(1, msp_debug, client, "autodetection failed,"
 				" switching to backup standard: %s (0x%04x)\n",
 				msp_stdlist[8].name ? msp_stdlist[8].name : "unknown",val);
-			val = 0x0009;
+			state->std = val = 0x0009;
 			msp_write_dem(client, 0x20, val);
 		}
 
-		/* set various prescales */
-		msp_write_dsp(client, 0x0d, 0x1900); /* scart */
-		msp_write_dsp(client, 0x0e, 0x2403); /* FM */
-		msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
-
 		/* set stereo */
 		switch (val) {
 		case 0x0008: /* B/G NICAM */
 		case 0x000a: /* I NICAM */
-			if (val == 0x0008)
-				state->mode = MSP_MODE_FM_NICAM1;
-			else
+		case 0x000b: /* D/K NICAM */
+			if (val == 0x000a)
 				state->mode = MSP_MODE_FM_NICAM2;
+			else
+				state->mode = MSP_MODE_FM_NICAM1;
 			/* just turn on stereo */
 			state->rxsubchans = V4L2_TUNER_SUB_STEREO;
 			state->nicam_on = 1;
@@ -739,6 +740,7 @@ int msp3410d_thread(void *data)
 			/* scart routing (this doesn't belong here I think) */
 			msp_set_scart(client,SCART_IN2,0);
 			break;
+		case 0x0002:
 		case 0x0003:
 		case 0x0004:
 		case 0x0005:
@@ -748,12 +750,19 @@ int msp3410d_thread(void *data)
 			break;
 		}
 
-		/* unmute, restore misc registers */
-		msp_set_audio(client);
-		msp_write_dsp(client, 0x13, state->acb);
+		/* set various prescales */
+		msp_write_dsp(client, 0x0d, 0x1900); /* scart */
+		msp_write_dsp(client, 0x0e, 0x3000); /* FM */
+		if (state->has_nicam)
+			msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
+
 		if (state->has_i2s_conf)
 			msp_write_dem(client, 0x40, state->i2s_mode);
 
+		/* unmute, restore misc registers */
+		msp_set_audio(client);
+
+		msp_write_dsp(client, 0x13, state->acb);
 		msp3400c_set_audmode(client);
 
 		/* monitor tv audio mode, the first time don't wait
@@ -772,97 +781,154 @@ int msp3410d_thread(void *data)
 
 /* ----------------------------------------------------------------------- */
 
-/* msp34xxG + (autoselect no-thread)                                       */
-/* this one uses both automatic standard detection and automatic sound     */
-/* select which are available in the newer G versions                      */
-/* struct msp: only norm, acb and source are really used in this mode      */
-
-/* set the same 'source' for the loudspeaker, scart and quasi-peak detector
- * the value for source is the same as bit 15:8 of DSP registers 0x08,
- * 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B
- *
- * this function replaces msp3400c_set_audmode
+/* msp34xxG + (autoselect no-thread)
+ * this one uses both automatic standard detection and automatic sound
+ * select which are available in the newer G versions
+ * struct msp: only norm, acb and source are really used in this mode
  */
-static void msp34xxg_set_source(struct i2c_client *client, int source)
+
+static int msp34xxg_modus(struct i2c_client *client)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
 
-	/* fix matrix mode to stereo and let the msp choose what
-	 * to output according to 'source', as recommended
-	 * for MONO (source==0) downmixing set bit[7:0] to 0x30
-	 */
-	int value = (source & 0x07) << 8 | (source == 0 ? 0x30 : 0x20);
+	if (state->radio) {
+		v4l_dbg(1, msp_debug, client, "selected radio modus\n");
+		return 0x0001;
+	}
 
-	v4l_dbg(1, msp_debug, client, "set source to %d (0x%x)\n", source, value);
-	msp_set_source(client, value);
-	/*
-	 * set identification threshold. Personally, I
-	 * I set it to a higher value that the default
-	 * of 0x190 to ignore noisy stereo signals.
-	 * this needs tuning. (recommended range 0x00a0-0x03c0)
-	 * 0x7f0 = forced mono mode
-	 */
-	/* a2 threshold for stereo/bilingual */
-	msp_write_dem(client, 0x22, msp_stereo_thresh);
-	state->source = source;
+	if (state->v4l2_std & V4L2_STD_PAL) {
+		v4l_dbg(1, msp_debug, client, "selected PAL modus\n");
+		return 0x7001;
+	}
+	if (state->v4l2_std == V4L2_STD_NTSC_M_JP) {
+		v4l_dbg(1, msp_debug, client, "selected M (EIA-J) modus\n");
+		return 0x4001;
+	}
+	if (state->v4l2_std == V4L2_STD_NTSC_M_KR) {
+		v4l_dbg(1, msp_debug, client, "selected M (A2) modus\n");
+		return 0x0001;
+	}
+	if (state->v4l2_std & V4L2_STD_MN) {
+		v4l_dbg(1, msp_debug, client, "selected M (BTSC) modus\n");
+		return 0x2001;
+	}
+	if (state->v4l2_std & V4L2_STD_SECAM) {
+		v4l_dbg(1, msp_debug, client, "selected SECAM modus\n");
+		return 0x6001;
+	}
+	return 0x0001;
 }
 
-/* (re-)initialize the msp34xxg, according to the current norm in state->norm
- * return 0 if it worked, -1 if it failed
- */
-static int msp34xxg_reset(struct i2c_client *client)
+static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in)
+ {
+	struct msp_state *state = i2c_get_clientdata(client);
+	int source, matrix;
+
+	switch (state->audmode) {
+	case V4L2_TUNER_MODE_MONO:
+		source = 0; /* mono only */
+		matrix = 0x30;
+		break;
+	case V4L2_TUNER_MODE_LANG1:
+		source = 3; /* stereo or A */
+		matrix = 0x00;
+		break;
+	case V4L2_TUNER_MODE_LANG2:
+		source = 4; /* stereo or B */
+		matrix = 0x10;
+		break;
+	case V4L2_TUNER_MODE_STEREO:
+	case V4L2_TUNER_MODE_LANG1_LANG2:
+	default:
+		source = 1; /* stereo or A|B */
+		matrix = 0x20;
+		break;
+	}
+
+	if (in == MSP_DSP_OUT_TUNER)
+		source = (source << 8) | 0x20;
+	/* the msp34x2g puts the MAIN_AVC, MAIN and AUX sources in 12, 13, 14
+	   instead of 11, 12, 13. So we add one for that msp version. */
+	else if (in >= MSP_DSP_OUT_MAIN_AVC && state->has_dolby_pro_logic)
+		source = ((in + 1) << 8) | matrix;
+	else
+		source = (in << 8) | matrix;
+
+	v4l_dbg(1, msp_debug, client, "set source to %d (0x%x) for output %02x\n",
+			in, source, reg);
+	msp_write_dsp(client, reg, source);
+}
+
+static void msp34xxg_set_sources(struct i2c_client *client)
+{
+	struct msp_state *state = i2c_get_clientdata(client);
+	u32 in = state->routing.input;
+
+	msp34xxg_set_source(client, 0x0008, (in >> 4) & 0xf);
+	/* quasi-peak detector is set to same input as the loudspeaker (MAIN) */
+	msp34xxg_set_source(client, 0x000c, (in >> 4) & 0xf);
+	msp34xxg_set_source(client, 0x0009, (in >> 8) & 0xf);
+	msp34xxg_set_source(client, 0x000a, (in >> 12) & 0xf);
+	if (state->has_scart23_in_scart2_out)
+		msp34xxg_set_source(client, 0x0041, (in >> 16) & 0xf);
+	msp34xxg_set_source(client, 0x000b, (in >> 20) & 0xf);
+}
+
+/* (re-)initialize the msp34xxg */
+static void msp34xxg_reset(struct i2c_client *client)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
-	int modus, std;
+	int tuner = (state->routing.input >> 3) & 1;
+	int modus;
+
+	/* initialize std to 1 (autodetect) to signal that no standard is
+	   selected yet. */
+	state->std = 1;
 
-	if (msp_reset(client))
-		return -1;
+	msp_reset(client);
 
 	/* make sure that input/output is muted (paranoid mode) */
 	/* ACB, mute DSP input, mute SCART 1 */
-	if (msp_write_dsp(client, 0x13, 0x0f20))
-		return -1;
+	msp_write_dsp(client, 0x13, 0x0f20);
 
 	if (state->has_i2s_conf)
 		msp_write_dem(client, 0x40, state->i2s_mode);
 
 	/* step-by-step initialisation, as described in the manual */
-	modus = msp_modus(client);
-	if (state->radio)
-		std = 0x40;
-	else
-		std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1;
-	modus &= ~0x03; /* STATUS_CHANGE = 0 */
-	modus |= 0x01;  /* AUTOMATIC_SOUND_DETECTION = 1 */
-	if (msp_write_dem(client, 0x30, modus))
-		return -1;
-	if (msp_write_dem(client, 0x20, std))
-		return -1;
+	modus = msp34xxg_modus(client);
+	modus |= tuner ? 0x100 : 0;
+	msp_write_dem(client, 0x30, modus);
 
 	/* write the dsps that may have an influence on
 	   standard/audio autodetection right now */
-	msp34xxg_set_source(client, state->source);
-
-	/* AM/FM Prescale [15:8] 75khz deviation */
-	if (msp_write_dsp(client, 0x0e, 0x3000))
-		return -1;
+	msp34xxg_set_sources(client);
 
-	/* NICAM Prescale 9db gain (as recommended) */
-	if (msp_write_dsp(client, 0x10, 0x5a00))
-		return -1;
+	msp_write_dsp(client, 0x0d, 0x1900); /* scart */
+	msp_write_dsp(client, 0x0e, 0x3000); /* FM */
+	if (state->has_nicam)
+		msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
 
-	return 0;
+	/* set identification threshold. Personally, I
+	 * I set it to a higher value than the default
+	 * of 0x190 to ignore noisy stereo signals.
+	 * this needs tuning. (recommended range 0x00a0-0x03c0)
+	 * 0x7f0 = forced mono mode
+	 *
+	 * a2 threshold for stereo/bilingual.
+	 * Note: this register is part of the Manual/Compatibility mode.
+	 * It is supported by all 'G'-family chips.
+	 */
+	msp_write_dem(client, 0x22, msp_stereo_thresh);
 }
 
 int msp34xxg_thread(void *data)
 {
 	struct i2c_client *client = data;
 	struct msp_state *state = i2c_get_clientdata(client);
-	int val, std, i;
+	int val, i;
 
 	v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n");
 
-	state->source = 1; /* default */
 	for (;;) {
 		v4l_dbg(2, msp_debug, client, "msp34xxg thread: sleep\n");
 		msp_sleep(state, -1);
@@ -876,12 +942,14 @@ int msp34xxg_thread(void *data)
 
 		/* setup the chip*/
 		msp34xxg_reset(client);
-		std = msp_standard;
-		if (std != 0x01)
+		state->std = state->radio ? 0x40 : msp_standard;
+		if (state->std != 1)
 			goto unmute;
+		/* start autodetect */
+		msp_write_dem(client, 0x20, state->std);
 
 		/* watch autodetect */
-		v4l_dbg(1, msp_debug, client, "triggered autodetect, waiting for result\n");
+		v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n");
 		for (i = 0; i < 10; i++) {
 			if (msp_sleep(state, 100))
 				goto restart;
@@ -889,20 +957,19 @@ int msp34xxg_thread(void *data)
 			/* check results */
 			val = msp_read_dem(client, 0x7e);
 			if (val < 0x07ff) {
-				std = val;
+				state->std = val;
 				break;
 			}
 			v4l_dbg(2, msp_debug, client, "detection still in progress\n");
 		}
-		if (std == 1) {
+		if (state->std == 1) {
 			v4l_dbg(1, msp_debug, client, "detection still in progress after 10 tries. giving up.\n");
 			continue;
 		}
 
 	unmute:
-		state->std = std;
-		v4l_dbg(1, msp_debug, client, "current standard: %s (0x%04x)\n",
-			msp_standard_std_name(std), std);
+		v4l_dbg(1, msp_debug, client, "detected standard: %s (0x%04x)\n",
+			msp_standard_std_name(state->std), state->std);
 
 		/* unmute: dispatch sound to scart output, set scart volume */
 		msp_set_audio(client);
@@ -911,20 +978,33 @@ int msp34xxg_thread(void *data)
 		if (msp_write_dsp(client, 0x13, state->acb))
 			return -1;
 
-		if (state->has_i2s_conf)
-			msp_write_dem(client, 0x40, state->i2s_mode);
+		/* the periodic stereo/SAP check is only relevant for
+		   the 0x20 standard (BTSC) */
+		if (state->std != 0x20)
+			continue;
+
+		state->watch_stereo = 1;
+
+		/* monitor tv audio mode, the first time don't wait
+		   in order to get a quick stereo/SAP update */
+		watch_stereo(client);
+		while (state->watch_stereo) {
+			watch_stereo(client);
+			if (msp_sleep(state, 5000))
+				goto restart;
+		}
 	}
 	v4l_dbg(1, msp_debug, client, "thread: exit\n");
 	return 0;
 }
 
-static void msp34xxg_detect_stereo(struct i2c_client *client)
+static int msp34xxg_detect_stereo(struct i2c_client *client)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
-
 	int status = msp_read_dem(client, 0x0200);
 	int is_bilingual = status & 0x100;
 	int is_stereo = status & 0x40;
+	int oldrx = state->rxsubchans;
 
 	state->rxsubchans = 0;
 	if (is_stereo)
@@ -932,42 +1012,31 @@ static void msp34xxg_detect_stereo(struct i2c_client *client)
 	else
 		state->rxsubchans = V4L2_TUNER_SUB_MONO;
 	if (is_bilingual) {
-		state->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-		/* I'm supposed to check whether it's SAP or not
-		 * and set only LANG2/SAP in this case. Yet, the MSP
-		 * does a lot of work to hide this and handle everything
-		 * the same way. I don't want to work around it so unless
-		 * this is a problem, I'll handle SAP just like lang1/lang2.
-		 */
+		if (state->std == 0x20)
+			state->rxsubchans |= V4L2_TUNER_SUB_SAP;
+		else
+			state->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
 	}
 	v4l_dbg(1, msp_debug, client, "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
 		status, is_stereo, is_bilingual, state->rxsubchans);
+	return (oldrx != state->rxsubchans);
 }
 
 static void msp34xxg_set_audmode(struct i2c_client *client)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
-	int source;
 
-	switch (state->audmode) {
-	case V4L2_TUNER_MODE_MONO:
-		source = 0; /* mono only */
-		break;
-	case V4L2_TUNER_MODE_STEREO:
-		source = 1; /* stereo or A|B, see comment in msp34xxg_get_v4l2_stereo() */
-		/* problem: that could also mean 2 (scart input) */
-		break;
-	case V4L2_TUNER_MODE_LANG1:
-		source = 3; /* stereo or A */
-		break;
-	case V4L2_TUNER_MODE_LANG2:
-		source = 4; /* stereo or B */
-		break;
-	default:
-		source  = 1;
-		break;
+	if (state->std == 0x20) {
+	       if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) &&
+		   (state->audmode == V4L2_TUNER_MODE_STEREO ||
+		    state->audmode == V4L2_TUNER_MODE_LANG2)) {
+			msp_write_dem(client, 0x20, 0x21);
+	       } else {
+			msp_write_dem(client, 0x20, 0x20);
+	       }
 	}
-	msp34xxg_set_source(client, source);
+
+	msp34xxg_set_sources(client);
 }
 
 void msp_set_audmode(struct i2c_client *client)
@@ -977,7 +1046,6 @@ void msp_set_audmode(struct i2c_client *client)
 	switch (state->opmode) {
 	case OPMODE_MANUAL:
 	case OPMODE_AUTODETECT:
-		state->watch_stereo = 0;
 		msp3400c_set_audmode(client);
 		break;
 	case OPMODE_AUTOSELECT:
@@ -986,18 +1054,17 @@ void msp_set_audmode(struct i2c_client *client)
 	}
 }
 
-void msp_detect_stereo(struct i2c_client *client)
+int msp_detect_stereo(struct i2c_client *client)
 {
 	struct msp_state *state  = i2c_get_clientdata(client);
 
 	switch (state->opmode) {
 	case OPMODE_MANUAL:
 	case OPMODE_AUTODETECT:
-		msp3400c_detect_stereo(client);
-		break;
+		return msp3400c_detect_stereo(client);
 	case OPMODE_AUTOSELECT:
-		msp34xxg_detect_stereo(client);
-		break;
+		return msp34xxg_detect_stereo(client);
 	}
+	return 0;
 }
 
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index eb3b31867494..b0aea4002d11 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -198,13 +198,13 @@ static int mxb_probe(struct saa7146_dev* dev)
 	/* loop through all i2c-devices on the bus and look who is there */
 	list_for_each(item,&mxb->i2c_adapter.clients) {
 		client = list_entry(item, struct i2c_client, list);
-		if( I2C_TEA6420_1 == client->addr )
+		if( I2C_ADDR_TEA6420_1 == client->addr )
 			mxb->tea6420_1 = client;
-		if( I2C_TEA6420_2 == client->addr )
+		if( I2C_ADDR_TEA6420_2 == client->addr )
 			mxb->tea6420_2 = client;
 		if( I2C_TEA6415C_2 == client->addr )
 			mxb->tea6415c = client;
-		if( I2C_TDA9840 == client->addr )
+		if( I2C_ADDR_TDA9840 == client->addr )
 			mxb->tda9840 = client;
 		if( I2C_SAA7111 == client->addr )
 			mxb->saa7111a = client;
@@ -790,6 +790,12 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
 				DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_STEREO\n"));
 				break;
 			}
+			case V4L2_TUNER_MODE_LANG1_LANG2: {
+				mxb->cur_mode = V4L2_TUNER_MODE_LANG1_LANG2;
+				byte = TDA9840_SET_BOTH;
+				DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1_LANG2\n"));
+				break;
+			}
 			case V4L2_TUNER_MODE_LANG1: {
 				mxb->cur_mode = V4L2_TUNER_MODE_LANG1;
 				byte = TDA9840_SET_LANG1;
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
new file mode 100644
index 000000000000..fdc8e3f13937
--- /dev/null
+++ b/drivers/media/video/ov511.c
@@ -0,0 +1,5932 @@
+/*
+ * OmniVision OV511 Camera-to-USB Bridge Driver
+ *
+ * Copyright (c) 1999-2003 Mark W. McClelland
+ * Original decompression code Copyright 1998-2000 OmniVision Technologies
+ * Many improvements by Bret Wallach <bwallac1@san.rr.com>
+ * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000)
+ * Snapshot code by Kevin Moore
+ * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org>
+ * Changes by Claudio Matsuoka <claudio@conectiva.com>
+ * Original SAA7111A code by Dave Perks <dperks@ibm.net>
+ * URB error messages from pwc driver by Nemosoft
+ * generic_ioctl() code from videodev.c by Gerd Knorr and Alan Cox
+ * Memory management (rvmalloc) code from bttv driver, by Gerd Knorr and others
+ *
+ * Based on the Linux CPiA driver written by Peter Pregler,
+ * Scott J. Bertin and Johannes Erdfelt.
+ *
+ * Please see the file: Documentation/usb/ov511.txt
+ * and the website at:  http://alpha.dyndns.org/ov511
+ * for more info.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/pagemap.h>
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <linux/mm.h>
+#include <linux/device.h>
+
+#if defined (__i386__)
+	#include <asm/cpufeature.h>
+#endif
+
+#include "ov511.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.64 for Linux 2.5"
+#define EMAIL "mark@alpha.dyndns.org"
+#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org> & Bret Wallach \
+	& Orion Sky Lawlor <olawlor@acm.org> & Kevin Moore & Charl P. Botha \
+	<cpbotha@ieee.org> & Claudio Matsuoka <claudio@conectiva.com>"
+#define DRIVER_DESC "ov511 USB Camera Driver"
+
+#define OV511_I2C_RETRIES 3
+#define ENABLE_Y_QUANTABLE 1
+#define ENABLE_UV_QUANTABLE 1
+
+#define OV511_MAX_UNIT_VIDEO 16
+
+/* Pixel count * bytes per YUV420 pixel (1.5) */
+#define MAX_FRAME_SIZE(w, h) ((w) * (h) * 3 / 2)
+
+#define MAX_DATA_SIZE(w, h) (MAX_FRAME_SIZE(w, h) + sizeof(struct timeval))
+
+/* Max size * bytes per YUV420 pixel (1.5) + one extra isoc frame for safety */
+#define MAX_RAW_DATA_SIZE(w, h) ((w) * (h) * 3 / 2 + 1024)
+
+#define FATAL_ERROR(rc) ((rc) < 0 && (rc) != -EPERM)
+
+/**********************************************************************
+ * Module Parameters
+ * (See ov511.txt for detailed descriptions of these)
+ **********************************************************************/
+
+/* These variables (and all static globals) default to zero */
+static int autobright		= 1;
+static int autogain		= 1;
+static int autoexp		= 1;
+static int debug;
+static int snapshot;
+static int cams			= 1;
+static int compress;
+static int testpat;
+static int dumppix;
+static int led 			= 1;
+static int dump_bridge;
+static int dump_sensor;
+static int printph;
+static int phy			= 0x1f;
+static int phuv			= 0x05;
+static int pvy			= 0x06;
+static int pvuv			= 0x06;
+static int qhy			= 0x14;
+static int qhuv			= 0x03;
+static int qvy			= 0x04;
+static int qvuv			= 0x04;
+static int lightfreq;
+static int bandingfilter;
+static int clockdiv		= -1;
+static int packetsize		= -1;
+static int framedrop		= -1;
+static int fastset;
+static int force_palette;
+static int backlight;
+static int unit_video[OV511_MAX_UNIT_VIDEO];
+static int remove_zeros;
+static int mirror;
+static int ov518_color;
+
+module_param(autobright, int, 0);
+MODULE_PARM_DESC(autobright, "Sensor automatically changes brightness");
+module_param(autogain, int, 0);
+MODULE_PARM_DESC(autogain, "Sensor automatically changes gain");
+module_param(autoexp, int, 0);
+MODULE_PARM_DESC(autoexp, "Sensor automatically changes exposure");
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug,
+  "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=max");
+module_param(snapshot, int, 0);
+MODULE_PARM_DESC(snapshot, "Enable snapshot mode");
+module_param(cams, int, 0);
+MODULE_PARM_DESC(cams, "Number of simultaneous cameras");
+module_param(compress, int, 0);
+MODULE_PARM_DESC(compress, "Turn on compression");
+module_param(testpat, int, 0);
+MODULE_PARM_DESC(testpat,
+  "Replace image with vertical bar testpattern (only partially working)");
+module_param(dumppix, int, 0);
+MODULE_PARM_DESC(dumppix, "Dump raw pixel data");
+module_param(led, int, 0);
+MODULE_PARM_DESC(led,
+  "LED policy (OV511+ or later). 0=off, 1=on (default), 2=auto (on when open)");
+module_param(dump_bridge, int, 0);
+MODULE_PARM_DESC(dump_bridge, "Dump the bridge registers");
+module_param(dump_sensor, int, 0);
+MODULE_PARM_DESC(dump_sensor, "Dump the sensor registers");
+module_param(printph, int, 0);
+MODULE_PARM_DESC(printph, "Print frame start/end headers");
+module_param(phy, int, 0);
+MODULE_PARM_DESC(phy, "Prediction range (horiz. Y)");
+module_param(phuv, int, 0);
+MODULE_PARM_DESC(phuv, "Prediction range (horiz. UV)");
+module_param(pvy, int, 0);
+MODULE_PARM_DESC(pvy, "Prediction range (vert. Y)");
+module_param(pvuv, int, 0);
+MODULE_PARM_DESC(pvuv, "Prediction range (vert. UV)");
+module_param(qhy, int, 0);
+MODULE_PARM_DESC(qhy, "Quantization threshold (horiz. Y)");
+module_param(qhuv, int, 0);
+MODULE_PARM_DESC(qhuv, "Quantization threshold (horiz. UV)");
+module_param(qvy, int, 0);
+MODULE_PARM_DESC(qvy, "Quantization threshold (vert. Y)");
+module_param(qvuv, int, 0);
+MODULE_PARM_DESC(qvuv, "Quantization threshold (vert. UV)");
+module_param(lightfreq, int, 0);
+MODULE_PARM_DESC(lightfreq,
+  "Light frequency. Set to 50 or 60 Hz, or zero for default settings");
+module_param(bandingfilter, int, 0);
+MODULE_PARM_DESC(bandingfilter,
+  "Enable banding filter (to reduce effects of fluorescent lighting)");
+module_param(clockdiv, int, 0);
+MODULE_PARM_DESC(clockdiv, "Force pixel clock divisor to a specific value");
+module_param(packetsize, int, 0);
+MODULE_PARM_DESC(packetsize, "Force a specific isoc packet size");
+module_param(framedrop, int, 0);
+MODULE_PARM_DESC(framedrop, "Force a specific frame drop register setting");
+module_param(fastset, int, 0);
+MODULE_PARM_DESC(fastset, "Allows picture settings to take effect immediately");
+module_param(force_palette, int, 0);
+MODULE_PARM_DESC(force_palette, "Force the palette to a specific value");
+module_param(backlight, int, 0);
+MODULE_PARM_DESC(backlight, "For objects that are lit from behind");
+static int num_uv;
+module_param_array(unit_video, int, &num_uv, 0);
+MODULE_PARM_DESC(unit_video,
+  "Force use of specific minor number(s). 0 is not allowed.");
+module_param(remove_zeros, int, 0);
+MODULE_PARM_DESC(remove_zeros,
+  "Remove zero-padding from uncompressed incoming data");
+module_param(mirror, int, 0);
+MODULE_PARM_DESC(mirror, "Reverse image horizontally");
+module_param(ov518_color, int, 0);
+MODULE_PARM_DESC(ov518_color, "Enable OV518 color (experimental)");
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/**********************************************************************
+ * Miscellaneous Globals
+ **********************************************************************/
+
+static struct usb_driver ov511_driver;
+
+/* Number of times to retry a failed I2C transaction. Increase this if you
+ * are getting "Failed to read sensor ID..." */
+static const int i2c_detect_tries = 5;
+
+static struct usb_device_id device_table [] = {
+	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511) },
+	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) },
+	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV518) },
+	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV518PLUS) },
+	{ USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) },
+	{ }  /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, device_table);
+
+static unsigned char yQuanTable511[] = OV511_YQUANTABLE;
+static unsigned char uvQuanTable511[] = OV511_UVQUANTABLE;
+static unsigned char yQuanTable518[] = OV518_YQUANTABLE;
+static unsigned char uvQuanTable518[] = OV518_UVQUANTABLE;
+
+/**********************************************************************
+ * Symbolic Names
+ **********************************************************************/
+
+/* Known OV511-based cameras */
+static struct symbolic_list camlist[] = {
+	{   0, "Generic Camera (no ID)" },
+	{   1, "Mustek WCam 3X" },
+	{   3, "D-Link DSB-C300" },
+	{   4, "Generic OV511/OV7610" },
+	{   5, "Puretek PT-6007" },
+	{   6, "Lifeview USB Life TV (NTSC)" },
+	{  21, "Creative Labs WebCam 3" },
+	{  22, "Lifeview USB Life TV (PAL D/K+B/G)" },
+	{  36, "Koala-Cam" },
+	{  38, "Lifeview USB Life TV (PAL)" },
+	{  41, "Samsung Anycam MPC-M10" },
+	{  43, "Mtekvision Zeca MV402" },
+	{  46, "Suma eON" },
+	{  70, "Lifeview USB Life TV (PAL/SECAM)" },
+	{ 100, "Lifeview RoboCam" },
+	{ 102, "AverMedia InterCam Elite" },
+	{ 112, "MediaForte MV300" },	/* or OV7110 evaluation kit */
+	{ 134, "Ezonics EZCam II" },
+	{ 192, "Webeye 2000B" },
+	{ 253, "Alpha Vision Tech. AlphaCam SE" },
+	{  -1, NULL }
+};
+
+/* Video4Linux1 Palettes */
+static struct symbolic_list v4l1_plist[] = {
+	{ VIDEO_PALETTE_GREY,	"GREY" },
+	{ VIDEO_PALETTE_HI240,	"HI240" },
+	{ VIDEO_PALETTE_RGB565,	"RGB565" },
+	{ VIDEO_PALETTE_RGB24,	"RGB24" },
+	{ VIDEO_PALETTE_RGB32,	"RGB32" },
+	{ VIDEO_PALETTE_RGB555,	"RGB555" },
+	{ VIDEO_PALETTE_YUV422,	"YUV422" },
+	{ VIDEO_PALETTE_YUYV,	"YUYV" },
+	{ VIDEO_PALETTE_UYVY,	"UYVY" },
+	{ VIDEO_PALETTE_YUV420,	"YUV420" },
+	{ VIDEO_PALETTE_YUV411,	"YUV411" },
+	{ VIDEO_PALETTE_RAW,	"RAW" },
+	{ VIDEO_PALETTE_YUV422P,"YUV422P" },
+	{ VIDEO_PALETTE_YUV411P,"YUV411P" },
+	{ VIDEO_PALETTE_YUV420P,"YUV420P" },
+	{ VIDEO_PALETTE_YUV410P,"YUV410P" },
+	{ -1, NULL }
+};
+
+static struct symbolic_list brglist[] = {
+	{ BRG_OV511,		"OV511" },
+	{ BRG_OV511PLUS,	"OV511+" },
+	{ BRG_OV518,		"OV518" },
+	{ BRG_OV518PLUS,	"OV518+" },
+	{ -1, NULL }
+};
+
+static struct symbolic_list senlist[] = {
+	{ SEN_OV76BE,	"OV76BE" },
+	{ SEN_OV7610,	"OV7610" },
+	{ SEN_OV7620,	"OV7620" },
+	{ SEN_OV7620AE,	"OV7620AE" },
+	{ SEN_OV6620,	"OV6620" },
+	{ SEN_OV6630,	"OV6630" },
+	{ SEN_OV6630AE,	"OV6630AE" },
+	{ SEN_OV6630AF,	"OV6630AF" },
+	{ SEN_OV8600,	"OV8600" },
+	{ SEN_KS0127,	"KS0127" },
+	{ SEN_KS0127B,	"KS0127B" },
+	{ SEN_SAA7111A,	"SAA7111A" },
+	{ -1, NULL }
+};
+
+/* URB error codes: */
+static struct symbolic_list urb_errlist[] = {
+	{ -ENOSR,	"Buffer error (overrun)" },
+	{ -EPIPE,	"Stalled (device not responding)" },
+	{ -EOVERFLOW,	"Babble (bad cable?)" },
+	{ -EPROTO,	"Bit-stuff error (bad cable?)" },
+	{ -EILSEQ,	"CRC/Timeout" },
+	{ -ETIMEDOUT,	"NAK (device does not respond)" },
+	{ -1, NULL }
+};
+
+/**********************************************************************
+ * Memory management
+ **********************************************************************/
+static void *
+rvmalloc(unsigned long size)
+{
+	void *mem;
+	unsigned long adr;
+
+	size = PAGE_ALIGN(size);
+	mem = vmalloc_32(size);
+	if (!mem)
+		return NULL;
+
+	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+	adr = (unsigned long) mem;
+	while (size > 0) {
+		SetPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	return mem;
+}
+
+static void
+rvfree(void *mem, unsigned long size)
+{
+	unsigned long adr;
+
+	if (!mem)
+		return;
+
+	adr = (unsigned long) mem;
+	while ((long) size > 0) {
+		ClearPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	vfree(mem);
+}
+
+/**********************************************************************
+ *
+ * Register I/O
+ *
+ **********************************************************************/
+
+/* Write an OV51x register */
+static int
+reg_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value)
+{
+	int rc;
+
+	PDEBUG(5, "0x%02X:0x%02X", reg, value);
+
+	mutex_lock(&ov->cbuf_lock);
+	ov->cbuf[0] = value;
+	rc = usb_control_msg(ov->dev,
+			     usb_sndctrlpipe(ov->dev, 0),
+			     (ov->bclass == BCL_OV518)?1:2 /* REG_IO */,
+			     USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			     0, (__u16)reg, &ov->cbuf[0], 1, 1000);
+	mutex_unlock(&ov->cbuf_lock);
+
+	if (rc < 0)
+		err("reg write: error %d: %s", rc, symbolic(urb_errlist, rc));
+
+	return rc;
+}
+
+/* Read from an OV51x register */
+/* returns: negative is error, pos or zero is data */
+static int
+reg_r(struct usb_ov511 *ov, unsigned char reg)
+{
+	int rc;
+
+	mutex_lock(&ov->cbuf_lock);
+	rc = usb_control_msg(ov->dev,
+			     usb_rcvctrlpipe(ov->dev, 0),
+			     (ov->bclass == BCL_OV518)?1:3 /* REG_IO */,
+			     USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			     0, (__u16)reg, &ov->cbuf[0], 1, 1000);
+
+	if (rc < 0) {
+		err("reg read: error %d: %s", rc, symbolic(urb_errlist, rc));
+	} else {
+		rc = ov->cbuf[0];
+		PDEBUG(5, "0x%02X:0x%02X", reg, ov->cbuf[0]);
+	}
+
+	mutex_unlock(&ov->cbuf_lock);
+
+	return rc;
+}
+
+/*
+ * Writes bits at positions specified by mask to an OV51x reg. Bits that are in
+ * the same position as 1's in "mask" are cleared and set to "value". Bits
+ * that are in the same position as 0's in "mask" are preserved, regardless
+ * of their respective state in "value".
+ */
+static int
+reg_w_mask(struct usb_ov511 *ov,
+	   unsigned char reg,
+	   unsigned char value,
+	   unsigned char mask)
+{
+	int ret;
+	unsigned char oldval, newval;
+
+	ret = reg_r(ov, reg);
+	if (ret < 0)
+		return ret;
+
+	oldval = (unsigned char) ret;
+	oldval &= (~mask);		/* Clear the masked bits */
+	value &= mask;			/* Enforce mask on value */
+	newval = oldval | value;	/* Set the desired bits */
+
+	return (reg_w(ov, reg, newval));
+}
+
+/*
+ * Writes multiple (n) byte value to a single register. Only valid with certain
+ * registers (0x30 and 0xc4 - 0xce).
+ */
+static int
+ov518_reg_w32(struct usb_ov511 *ov, unsigned char reg, u32 val, int n)
+{
+	int rc;
+
+	PDEBUG(5, "0x%02X:%7d, n=%d", reg, val, n);
+
+	mutex_lock(&ov->cbuf_lock);
+
+	*((__le32 *)ov->cbuf) = __cpu_to_le32(val);
+
+	rc = usb_control_msg(ov->dev,
+			     usb_sndctrlpipe(ov->dev, 0),
+			     1 /* REG_IO */,
+			     USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			     0, (__u16)reg, ov->cbuf, n, 1000);
+	mutex_unlock(&ov->cbuf_lock);
+
+	if (rc < 0)
+		err("reg write multiple: error %d: %s", rc,
+		    symbolic(urb_errlist, rc));
+
+	return rc;
+}
+
+static int
+ov511_upload_quan_tables(struct usb_ov511 *ov)
+{
+	unsigned char *pYTable = yQuanTable511;
+	unsigned char *pUVTable = uvQuanTable511;
+	unsigned char val0, val1;
+	int i, rc, reg = R511_COMP_LUT_BEGIN;
+
+	PDEBUG(4, "Uploading quantization tables");
+
+	for (i = 0; i < OV511_QUANTABLESIZE / 2; i++) {
+		if (ENABLE_Y_QUANTABLE)	{
+			val0 = *pYTable++;
+			val1 = *pYTable++;
+			val0 &= 0x0f;
+			val1 &= 0x0f;
+			val0 |= val1 << 4;
+			rc = reg_w(ov, reg, val0);
+			if (rc < 0)
+				return rc;
+		}
+
+		if (ENABLE_UV_QUANTABLE) {
+			val0 = *pUVTable++;
+			val1 = *pUVTable++;
+			val0 &= 0x0f;
+			val1 &= 0x0f;
+			val0 |= val1 << 4;
+			rc = reg_w(ov, reg + OV511_QUANTABLESIZE/2, val0);
+			if (rc < 0)
+				return rc;
+		}
+
+		reg++;
+	}
+
+	return 0;
+}
+
+/* OV518 quantization tables are 8x4 (instead of 8x8) */
+static int
+ov518_upload_quan_tables(struct usb_ov511 *ov)
+{
+	unsigned char *pYTable = yQuanTable518;
+	unsigned char *pUVTable = uvQuanTable518;
+	unsigned char val0, val1;
+	int i, rc, reg = R511_COMP_LUT_BEGIN;
+
+	PDEBUG(4, "Uploading quantization tables");
+
+	for (i = 0; i < OV518_QUANTABLESIZE / 2; i++) {
+		if (ENABLE_Y_QUANTABLE) {
+			val0 = *pYTable++;
+			val1 = *pYTable++;
+			val0 &= 0x0f;
+			val1 &= 0x0f;
+			val0 |= val1 << 4;
+			rc = reg_w(ov, reg, val0);
+			if (rc < 0)
+				return rc;
+		}
+
+		if (ENABLE_UV_QUANTABLE) {
+			val0 = *pUVTable++;
+			val1 = *pUVTable++;
+			val0 &= 0x0f;
+			val1 &= 0x0f;
+			val0 |= val1 << 4;
+			rc = reg_w(ov, reg + OV518_QUANTABLESIZE/2, val0);
+			if (rc < 0)
+				return rc;
+		}
+
+		reg++;
+	}
+
+	return 0;
+}
+
+static int
+ov51x_reset(struct usb_ov511 *ov, unsigned char reset_type)
+{
+	int rc;
+
+	/* Setting bit 0 not allowed on 518/518Plus */
+	if (ov->bclass == BCL_OV518)
+		reset_type &= 0xfe;
+
+	PDEBUG(4, "Reset: type=0x%02X", reset_type);
+
+	rc = reg_w(ov, R51x_SYS_RESET, reset_type);
+	rc = reg_w(ov, R51x_SYS_RESET, 0);
+
+	if (rc < 0)
+		err("reset: command failed");
+
+	return rc;
+}
+
+/**********************************************************************
+ *
+ * Low-level I2C I/O functions
+ *
+ **********************************************************************/
+
+/* NOTE: Do not call this function directly!
+ * The OV518 I2C I/O procedure is different, hence, this function.
+ * This is normally only called from i2c_w(). Note that this function
+ * always succeeds regardless of whether the sensor is present and working.
+ */
+static int
+ov518_i2c_write_internal(struct usb_ov511 *ov,
+			 unsigned char reg,
+			 unsigned char value)
+{
+	int rc;
+
+	PDEBUG(5, "0x%02X:0x%02X", reg, value);
+
+	/* Select camera register */
+	rc = reg_w(ov, R51x_I2C_SADDR_3, reg);
+	if (rc < 0)
+		return rc;
+
+	/* Write "value" to I2C data port of OV511 */
+	rc = reg_w(ov, R51x_I2C_DATA, value);
+	if (rc < 0)
+		return rc;
+
+	/* Initiate 3-byte write cycle */
+	rc = reg_w(ov, R518_I2C_CTL, 0x01);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+/* NOTE: Do not call this function directly! */
+static int
+ov511_i2c_write_internal(struct usb_ov511 *ov,
+			 unsigned char reg,
+			 unsigned char value)
+{
+	int rc, retries;
+
+	PDEBUG(5, "0x%02X:0x%02X", reg, value);
+
+	/* Three byte write cycle */
+	for (retries = OV511_I2C_RETRIES; ; ) {
+		/* Select camera register */
+		rc = reg_w(ov, R51x_I2C_SADDR_3, reg);
+		if (rc < 0)
+			break;
+
+		/* Write "value" to I2C data port of OV511 */
+		rc = reg_w(ov, R51x_I2C_DATA, value);
+		if (rc < 0)
+			break;
+
+		/* Initiate 3-byte write cycle */
+		rc = reg_w(ov, R511_I2C_CTL, 0x01);
+		if (rc < 0)
+			break;
+
+		/* Retry until idle */
+		do
+			rc = reg_r(ov, R511_I2C_CTL);
+		while (rc > 0 && ((rc&1) == 0));
+		if (rc < 0)
+			break;
+
+		/* Ack? */
+		if ((rc&2) == 0) {
+			rc = 0;
+			break;
+		}
+#if 0
+		/* I2C abort */
+		reg_w(ov, R511_I2C_CTL, 0x10);
+#endif
+		if (--retries < 0) {
+			err("i2c write retries exhausted");
+			rc = -1;
+			break;
+		}
+	}
+
+	return rc;
+}
+
+/* NOTE: Do not call this function directly!
+ * The OV518 I2C I/O procedure is different, hence, this function.
+ * This is normally only called from i2c_r(). Note that this function
+ * always succeeds regardless of whether the sensor is present and working.
+ */
+static int
+ov518_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
+{
+	int rc, value;
+
+	/* Select camera register */
+	rc = reg_w(ov, R51x_I2C_SADDR_2, reg);
+	if (rc < 0)
+		return rc;
+
+	/* Initiate 2-byte write cycle */
+	rc = reg_w(ov, R518_I2C_CTL, 0x03);
+	if (rc < 0)
+		return rc;
+
+	/* Initiate 2-byte read cycle */
+	rc = reg_w(ov, R518_I2C_CTL, 0x05);
+	if (rc < 0)
+		return rc;
+
+	value = reg_r(ov, R51x_I2C_DATA);
+
+	PDEBUG(5, "0x%02X:0x%02X", reg, value);
+
+	return value;
+}
+
+/* NOTE: Do not call this function directly!
+ * returns: negative is error, pos or zero is data */
+static int
+ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
+{
+	int rc, value, retries;
+
+	/* Two byte write cycle */
+	for (retries = OV511_I2C_RETRIES; ; ) {
+		/* Select camera register */
+		rc = reg_w(ov, R51x_I2C_SADDR_2, reg);
+		if (rc < 0)
+			return rc;
+
+		/* Initiate 2-byte write cycle */
+		rc = reg_w(ov, R511_I2C_CTL, 0x03);
+		if (rc < 0)
+			return rc;
+
+		/* Retry until idle */
+		do
+			 rc = reg_r(ov, R511_I2C_CTL);
+		while (rc > 0 && ((rc&1) == 0));
+		if (rc < 0)
+			return rc;
+
+		if ((rc&2) == 0) /* Ack? */
+			break;
+
+		/* I2C abort */
+		reg_w(ov, R511_I2C_CTL, 0x10);
+
+		if (--retries < 0) {
+			err("i2c write retries exhausted");
+			return -1;
+		}
+	}
+
+	/* Two byte read cycle */
+	for (retries = OV511_I2C_RETRIES; ; ) {
+		/* Initiate 2-byte read cycle */
+		rc = reg_w(ov, R511_I2C_CTL, 0x05);
+		if (rc < 0)
+			return rc;
+
+		/* Retry until idle */
+		do
+			rc = reg_r(ov, R511_I2C_CTL);
+		while (rc > 0 && ((rc&1) == 0));
+		if (rc < 0)
+			return rc;
+
+		if ((rc&2) == 0) /* Ack? */
+			break;
+
+		/* I2C abort */
+		rc = reg_w(ov, R511_I2C_CTL, 0x10);
+		if (rc < 0)
+			return rc;
+
+		if (--retries < 0) {
+			err("i2c read retries exhausted");
+			return -1;
+		}
+	}
+
+	value = reg_r(ov, R51x_I2C_DATA);
+
+	PDEBUG(5, "0x%02X:0x%02X", reg, value);
+
+	/* This is needed to make i2c_w() work */
+	rc = reg_w(ov, R511_I2C_CTL, 0x05);
+	if (rc < 0)
+		return rc;
+
+	return value;
+}
+
+/* returns: negative is error, pos or zero is data */
+static int
+i2c_r(struct usb_ov511 *ov, unsigned char reg)
+{
+	int rc;
+
+	mutex_lock(&ov->i2c_lock);
+
+	if (ov->bclass == BCL_OV518)
+		rc = ov518_i2c_read_internal(ov, reg);
+	else
+		rc = ov511_i2c_read_internal(ov, reg);
+
+	mutex_unlock(&ov->i2c_lock);
+
+	return rc;
+}
+
+static int
+i2c_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value)
+{
+	int rc;
+
+	mutex_lock(&ov->i2c_lock);
+
+	if (ov->bclass == BCL_OV518)
+		rc = ov518_i2c_write_internal(ov, reg, value);
+	else
+		rc = ov511_i2c_write_internal(ov, reg, value);
+
+	mutex_unlock(&ov->i2c_lock);
+
+	return rc;
+}
+
+/* Do not call this function directly! */
+static int
+ov51x_i2c_write_mask_internal(struct usb_ov511 *ov,
+			      unsigned char reg,
+			      unsigned char value,
+			      unsigned char mask)
+{
+	int rc;
+	unsigned char oldval, newval;
+
+	if (mask == 0xff) {
+		newval = value;
+	} else {
+		if (ov->bclass == BCL_OV518)
+			rc = ov518_i2c_read_internal(ov, reg);
+		else
+			rc = ov511_i2c_read_internal(ov, reg);
+		if (rc < 0)
+			return rc;
+
+		oldval = (unsigned char) rc;
+		oldval &= (~mask);		/* Clear the masked bits */
+		value &= mask;			/* Enforce mask on value */
+		newval = oldval | value;	/* Set the desired bits */
+	}
+
+	if (ov->bclass == BCL_OV518)
+		return (ov518_i2c_write_internal(ov, reg, newval));
+	else
+		return (ov511_i2c_write_internal(ov, reg, newval));
+}
+
+/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
+ * the same position as 1's in "mask" are cleared and set to "value". Bits
+ * that are in the same position as 0's in "mask" are preserved, regardless
+ * of their respective state in "value".
+ */
+static int
+i2c_w_mask(struct usb_ov511 *ov,
+	   unsigned char reg,
+	   unsigned char value,
+	   unsigned char mask)
+{
+	int rc;
+
+	mutex_lock(&ov->i2c_lock);
+	rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask);
+	mutex_unlock(&ov->i2c_lock);
+
+	return rc;
+}
+
+/* Set the read and write slave IDs. The "slave" argument is the write slave,
+ * and the read slave will be set to (slave + 1). ov->i2c_lock should be held
+ * when calling this. This should not be called from outside the i2c I/O
+ * functions.
+ */
+static int
+i2c_set_slave_internal(struct usb_ov511 *ov, unsigned char slave)
+{
+	int rc;
+
+	rc = reg_w(ov, R51x_I2C_W_SID, slave);
+	if (rc < 0)
+		return rc;
+
+	rc = reg_w(ov, R51x_I2C_R_SID, slave + 1);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+/* Write to a specific I2C slave ID and register, using the specified mask */
+static int
+i2c_w_slave(struct usb_ov511 *ov,
+	    unsigned char slave,
+	    unsigned char reg,
+	    unsigned char value,
+	    unsigned char mask)
+{
+	int rc = 0;
+
+	mutex_lock(&ov->i2c_lock);
+
+	/* Set new slave IDs */
+	rc = i2c_set_slave_internal(ov, slave);
+	if (rc < 0)
+		goto out;
+
+	rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask);
+
+out:
+	/* Restore primary IDs */
+	if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0)
+		err("Couldn't restore primary I2C slave");
+
+	mutex_unlock(&ov->i2c_lock);
+	return rc;
+}
+
+/* Read from a specific I2C slave ID and register */
+static int
+i2c_r_slave(struct usb_ov511 *ov,
+	    unsigned char slave,
+	    unsigned char reg)
+{
+	int rc;
+
+	mutex_lock(&ov->i2c_lock);
+
+	/* Set new slave IDs */
+	rc = i2c_set_slave_internal(ov, slave);
+	if (rc < 0)
+		goto out;
+
+	if (ov->bclass == BCL_OV518)
+		rc = ov518_i2c_read_internal(ov, reg);
+	else
+		rc = ov511_i2c_read_internal(ov, reg);
+
+out:
+	/* Restore primary IDs */
+	if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0)
+		err("Couldn't restore primary I2C slave");
+
+	mutex_unlock(&ov->i2c_lock);
+	return rc;
+}
+
+/* Sets I2C read and write slave IDs. Returns <0 for error */
+static int
+ov51x_set_slave_ids(struct usb_ov511 *ov, unsigned char sid)
+{
+	int rc;
+
+	mutex_lock(&ov->i2c_lock);
+
+	rc = i2c_set_slave_internal(ov, sid);
+	if (rc < 0)
+		goto out;
+
+	// FIXME: Is this actually necessary?
+	rc = ov51x_reset(ov, OV511_RESET_NOREGS);
+out:
+	mutex_unlock(&ov->i2c_lock);
+	return rc;
+}
+
+static int
+write_regvals(struct usb_ov511 *ov, struct ov511_regvals * pRegvals)
+{
+	int rc;
+
+	while (pRegvals->bus != OV511_DONE_BUS) {
+		if (pRegvals->bus == OV511_REG_BUS) {
+			if ((rc = reg_w(ov, pRegvals->reg, pRegvals->val)) < 0)
+				return rc;
+		} else if (pRegvals->bus == OV511_I2C_BUS) {
+			if ((rc = i2c_w(ov, pRegvals->reg, pRegvals->val)) < 0)
+				return rc;
+		} else {
+			err("Bad regval array");
+			return -1;
+		}
+		pRegvals++;
+	}
+	return 0;
+}
+
+#ifdef OV511_DEBUG
+static void
+dump_i2c_range(struct usb_ov511 *ov, int reg1, int regn)
+{
+	int i, rc;
+
+	for (i = reg1; i <= regn; i++) {
+		rc = i2c_r(ov, i);
+		info("Sensor[0x%02X] = 0x%02X", i, rc);
+	}
+}
+
+static void
+dump_i2c_regs(struct usb_ov511 *ov)
+{
+	info("I2C REGS");
+	dump_i2c_range(ov, 0x00, 0x7C);
+}
+
+static void
+dump_reg_range(struct usb_ov511 *ov, int reg1, int regn)
+{
+	int i, rc;
+
+	for (i = reg1; i <= regn; i++) {
+		rc = reg_r(ov, i);
+		info("OV511[0x%02X] = 0x%02X", i, rc);
+	}
+}
+
+static void
+ov511_dump_regs(struct usb_ov511 *ov)
+{
+	info("CAMERA INTERFACE REGS");
+	dump_reg_range(ov, 0x10, 0x1f);
+	info("DRAM INTERFACE REGS");
+	dump_reg_range(ov, 0x20, 0x23);
+	info("ISO FIFO REGS");
+	dump_reg_range(ov, 0x30, 0x31);
+	info("PIO REGS");
+	dump_reg_range(ov, 0x38, 0x39);
+	dump_reg_range(ov, 0x3e, 0x3e);
+	info("I2C REGS");
+	dump_reg_range(ov, 0x40, 0x49);
+	info("SYSTEM CONTROL REGS");
+	dump_reg_range(ov, 0x50, 0x55);
+	dump_reg_range(ov, 0x5e, 0x5f);
+	info("OmniCE REGS");
+	dump_reg_range(ov, 0x70, 0x79);
+	/* NOTE: Quantization tables are not readable. You will get the value
+	 * in reg. 0x79 for every table register */
+	dump_reg_range(ov, 0x80, 0x9f);
+	dump_reg_range(ov, 0xa0, 0xbf);
+
+}
+
+static void
+ov518_dump_regs(struct usb_ov511 *ov)
+{
+	info("VIDEO MODE REGS");
+	dump_reg_range(ov, 0x20, 0x2f);
+	info("DATA PUMP AND SNAPSHOT REGS");
+	dump_reg_range(ov, 0x30, 0x3f);
+	info("I2C REGS");
+	dump_reg_range(ov, 0x40, 0x4f);
+	info("SYSTEM CONTROL AND VENDOR REGS");
+	dump_reg_range(ov, 0x50, 0x5f);
+	info("60 - 6F");
+	dump_reg_range(ov, 0x60, 0x6f);
+	info("70 - 7F");
+	dump_reg_range(ov, 0x70, 0x7f);
+	info("Y QUANTIZATION TABLE");
+	dump_reg_range(ov, 0x80, 0x8f);
+	info("UV QUANTIZATION TABLE");
+	dump_reg_range(ov, 0x90, 0x9f);
+	info("A0 - BF");
+	dump_reg_range(ov, 0xa0, 0xbf);
+	info("CBR");
+	dump_reg_range(ov, 0xc0, 0xcf);
+}
+#endif
+
+/*****************************************************************************/
+
+/* Temporarily stops OV511 from functioning. Must do this before changing
+ * registers while the camera is streaming */
+static inline int
+ov51x_stop(struct usb_ov511 *ov)
+{
+	PDEBUG(4, "stopping");
+	ov->stopped = 1;
+	if (ov->bclass == BCL_OV518)
+		return (reg_w_mask(ov, R51x_SYS_RESET, 0x3a, 0x3a));
+	else
+		return (reg_w(ov, R51x_SYS_RESET, 0x3d));
+}
+
+/* Restarts OV511 after ov511_stop() is called. Has no effect if it is not
+ * actually stopped (for performance). */
+static inline int
+ov51x_restart(struct usb_ov511 *ov)
+{
+	if (ov->stopped) {
+		PDEBUG(4, "restarting");
+		ov->stopped = 0;
+
+		/* Reinitialize the stream */
+		if (ov->bclass == BCL_OV518)
+			reg_w(ov, 0x2f, 0x80);
+
+		return (reg_w(ov, R51x_SYS_RESET, 0x00));
+	}
+
+	return 0;
+}
+
+/* Sleeps until no frames are active. Returns !0 if got signal */
+static int
+ov51x_wait_frames_inactive(struct usb_ov511 *ov)
+{
+	return wait_event_interruptible(ov->wq, ov->curframe < 0);
+}
+
+/* Resets the hardware snapshot button */
+static void
+ov51x_clear_snapshot(struct usb_ov511 *ov)
+{
+	if (ov->bclass == BCL_OV511) {
+		reg_w(ov, R51x_SYS_SNAP, 0x00);
+		reg_w(ov, R51x_SYS_SNAP, 0x02);
+		reg_w(ov, R51x_SYS_SNAP, 0x00);
+	} else if (ov->bclass == BCL_OV518) {
+		warn("snapshot reset not supported yet on OV518(+)");
+	} else {
+		err("clear snap: invalid bridge type");
+	}
+}
+
+#if 0
+/* Checks the status of the snapshot button. Returns 1 if it was pressed since
+ * it was last cleared, and zero in all other cases (including errors) */
+static int
+ov51x_check_snapshot(struct usb_ov511 *ov)
+{
+	int ret, status = 0;
+
+	if (ov->bclass == BCL_OV511) {
+		ret = reg_r(ov, R51x_SYS_SNAP);
+		if (ret < 0) {
+			err("Error checking snspshot status (%d)", ret);
+		} else if (ret & 0x08) {
+			status = 1;
+		}
+	} else if (ov->bclass == BCL_OV518) {
+		warn("snapshot check not supported yet on OV518(+)");
+	} else {
+		err("check snap: invalid bridge type");
+	}
+
+	return status;
+}
+#endif
+
+/* This does an initial reset of an OmniVision sensor and ensures that I2C
+ * is synchronized. Returns <0 for failure.
+ */
+static int
+init_ov_sensor(struct usb_ov511 *ov)
+{
+	int i, success;
+
+	/* Reset the sensor */
+	if (i2c_w(ov, 0x12, 0x80) < 0)
+		return -EIO;
+
+	/* Wait for it to initialize */
+	msleep(150);
+
+	for (i = 0, success = 0; i < i2c_detect_tries && !success; i++) {
+		if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) &&
+		    (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) {
+			success = 1;
+			continue;
+		}
+
+		/* Reset the sensor */
+		if (i2c_w(ov, 0x12, 0x80) < 0)
+			return -EIO;
+		/* Wait for it to initialize */
+		msleep(150);
+		/* Dummy read to sync I2C */
+		if (i2c_r(ov, 0x00) < 0)
+			return -EIO;
+	}
+
+	if (!success)
+		return -EIO;
+
+	PDEBUG(1, "I2C synced in %d attempt(s)", i);
+
+	return 0;
+}
+
+static int
+ov511_set_packet_size(struct usb_ov511 *ov, int size)
+{
+	int alt, mult;
+
+	if (ov51x_stop(ov) < 0)
+		return -EIO;
+
+	mult = size >> 5;
+
+	if (ov->bridge == BRG_OV511) {
+		if (size == 0)
+			alt = OV511_ALT_SIZE_0;
+		else if (size == 257)
+			alt = OV511_ALT_SIZE_257;
+		else if (size == 513)
+			alt = OV511_ALT_SIZE_513;
+		else if (size == 769)
+			alt = OV511_ALT_SIZE_769;
+		else if (size == 993)
+			alt = OV511_ALT_SIZE_993;
+		else {
+			err("Set packet size: invalid size (%d)", size);
+			return -EINVAL;
+		}
+	} else if (ov->bridge == BRG_OV511PLUS) {
+		if (size == 0)
+			alt = OV511PLUS_ALT_SIZE_0;
+		else if (size == 33)
+			alt = OV511PLUS_ALT_SIZE_33;
+		else if (size == 129)
+			alt = OV511PLUS_ALT_SIZE_129;
+		else if (size == 257)
+			alt = OV511PLUS_ALT_SIZE_257;
+		else if (size == 385)
+			alt = OV511PLUS_ALT_SIZE_385;
+		else if (size == 513)
+			alt = OV511PLUS_ALT_SIZE_513;
+		else if (size == 769)
+			alt = OV511PLUS_ALT_SIZE_769;
+		else if (size == 961)
+			alt = OV511PLUS_ALT_SIZE_961;
+		else {
+			err("Set packet size: invalid size (%d)", size);
+			return -EINVAL;
+		}
+	} else {
+		err("Set packet size: Invalid bridge type");
+		return -EINVAL;
+	}
+
+	PDEBUG(3, "%d, mult=%d, alt=%d", size, mult, alt);
+
+	if (reg_w(ov, R51x_FIFO_PSIZE, mult) < 0)
+		return -EIO;
+
+	if (usb_set_interface(ov->dev, ov->iface, alt) < 0) {
+		err("Set packet size: set interface error");
+		return -EBUSY;
+	}
+
+	if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0)
+		return -EIO;
+
+	ov->packet_size = size;
+
+	if (ov51x_restart(ov) < 0)
+		return -EIO;
+
+	return 0;
+}
+
+/* Note: Unlike the OV511/OV511+, the size argument does NOT include the
+ * optional packet number byte. The actual size *is* stored in ov->packet_size,
+ * though. */
+static int
+ov518_set_packet_size(struct usb_ov511 *ov, int size)
+{
+	int alt;
+
+	if (ov51x_stop(ov) < 0)
+		return -EIO;
+
+	if (ov->bclass == BCL_OV518) {
+		if (size == 0)
+			alt = OV518_ALT_SIZE_0;
+		else if (size == 128)
+			alt = OV518_ALT_SIZE_128;
+		else if (size == 256)
+			alt = OV518_ALT_SIZE_256;
+		else if (size == 384)
+			alt = OV518_ALT_SIZE_384;
+		else if (size == 512)
+			alt = OV518_ALT_SIZE_512;
+		else if (size == 640)
+			alt = OV518_ALT_SIZE_640;
+		else if (size == 768)
+			alt = OV518_ALT_SIZE_768;
+		else if (size == 896)
+			alt = OV518_ALT_SIZE_896;
+		else {
+			err("Set packet size: invalid size (%d)", size);
+			return -EINVAL;
+		}
+	} else {
+		err("Set packet size: Invalid bridge type");
+		return -EINVAL;
+	}
+
+	PDEBUG(3, "%d, alt=%d", size, alt);
+
+	ov->packet_size = size;
+	if (size > 0) {
+		/* Program ISO FIFO size reg (packet number isn't included) */
+		ov518_reg_w32(ov, 0x30, size, 2);
+
+		if (ov->packet_numbering)
+			++ov->packet_size;
+	}
+
+	if (usb_set_interface(ov->dev, ov->iface, alt) < 0) {
+		err("Set packet size: set interface error");
+		return -EBUSY;
+	}
+
+	/* Initialize the stream */
+	if (reg_w(ov, 0x2f, 0x80) < 0)
+		return -EIO;
+
+	if (ov51x_restart(ov) < 0)
+		return -EIO;
+
+	if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0)
+		return -EIO;
+
+	return 0;
+}
+
+/* Upload compression params and quantization tables. Returns 0 for success. */
+static int
+ov511_init_compression(struct usb_ov511 *ov)
+{
+	int rc = 0;
+
+	if (!ov->compress_inited) {
+		reg_w(ov, 0x70, phy);
+		reg_w(ov, 0x71, phuv);
+		reg_w(ov, 0x72, pvy);
+		reg_w(ov, 0x73, pvuv);
+		reg_w(ov, 0x74, qhy);
+		reg_w(ov, 0x75, qhuv);
+		reg_w(ov, 0x76, qvy);
+		reg_w(ov, 0x77, qvuv);
+
+		if (ov511_upload_quan_tables(ov) < 0) {
+			err("Error uploading quantization tables");
+			rc = -EIO;
+			goto out;
+		}
+	}
+
+	ov->compress_inited = 1;
+out:
+	return rc;
+}
+
+/* Upload compression params and quantization tables. Returns 0 for success. */
+static int
+ov518_init_compression(struct usb_ov511 *ov)
+{
+	int rc = 0;
+
+	if (!ov->compress_inited) {
+		if (ov518_upload_quan_tables(ov) < 0) {
+			err("Error uploading quantization tables");
+			rc = -EIO;
+			goto out;
+		}
+	}
+
+	ov->compress_inited = 1;
+out:
+	return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/* Sets sensor's contrast setting to "val" */
+static int
+sensor_set_contrast(struct usb_ov511 *ov, unsigned short val)
+{
+	int rc;
+
+	PDEBUG(3, "%d", val);
+
+	if (ov->stop_during_set)
+		if (ov51x_stop(ov) < 0)
+			return -EIO;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV6620:
+	{
+		rc = i2c_w(ov, OV7610_REG_CNT, val >> 8);
+		if (rc < 0)
+			goto out;
+		break;
+	}
+	case SEN_OV6630:
+	{
+		rc = i2c_w_mask(ov, OV7610_REG_CNT, val >> 12, 0x0f);
+		if (rc < 0)
+			goto out;
+		break;
+	}
+	case SEN_OV7620:
+	{
+		unsigned char ctab[] = {
+			0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
+			0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
+		};
+
+		/* Use Y gamma control instead. Bit 0 enables it. */
+		rc = i2c_w(ov, 0x64, ctab[val>>12]);
+		if (rc < 0)
+			goto out;
+		break;
+	}
+	case SEN_SAA7111A:
+	{
+		rc = i2c_w(ov, 0x0b, val >> 9);
+		if (rc < 0)
+			goto out;
+		break;
+	}
+	default:
+	{
+		PDEBUG(3, "Unsupported with this sensor");
+		rc = -EPERM;
+		goto out;
+	}
+	}
+
+	rc = 0;		/* Success */
+	ov->contrast = val;
+out:
+	if (ov51x_restart(ov) < 0)
+		return -EIO;
+
+	return rc;
+}
+
+/* Gets sensor's contrast setting */
+static int
+sensor_get_contrast(struct usb_ov511 *ov, unsigned short *val)
+{
+	int rc;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV6620:
+		rc = i2c_r(ov, OV7610_REG_CNT);
+		if (rc < 0)
+			return rc;
+		else
+			*val = rc << 8;
+		break;
+	case SEN_OV6630:
+		rc = i2c_r(ov, OV7610_REG_CNT);
+		if (rc < 0)
+			return rc;
+		else
+			*val = rc << 12;
+		break;
+	case SEN_OV7620:
+		/* Use Y gamma reg instead. Bit 0 is the enable bit. */
+		rc = i2c_r(ov, 0x64);
+		if (rc < 0)
+			return rc;
+		else
+			*val = (rc & 0xfe) << 8;
+		break;
+	case SEN_SAA7111A:
+		*val = ov->contrast;
+		break;
+	default:
+		PDEBUG(3, "Unsupported with this sensor");
+		return -EPERM;
+	}
+
+	PDEBUG(3, "%d", *val);
+	ov->contrast = *val;
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/* Sets sensor's brightness setting to "val" */
+static int
+sensor_set_brightness(struct usb_ov511 *ov, unsigned short val)
+{
+	int rc;
+
+	PDEBUG(4, "%d", val);
+
+	if (ov->stop_during_set)
+		if (ov51x_stop(ov) < 0)
+			return -EIO;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV76BE:
+	case SEN_OV6620:
+	case SEN_OV6630:
+		rc = i2c_w(ov, OV7610_REG_BRT, val >> 8);
+		if (rc < 0)
+			goto out;
+		break;
+	case SEN_OV7620:
+		/* 7620 doesn't like manual changes when in auto mode */
+		if (!ov->auto_brt) {
+			rc = i2c_w(ov, OV7610_REG_BRT, val >> 8);
+			if (rc < 0)
+				goto out;
+		}
+		break;
+	case SEN_SAA7111A:
+		rc = i2c_w(ov, 0x0a, val >> 8);
+		if (rc < 0)
+			goto out;
+		break;
+	default:
+		PDEBUG(3, "Unsupported with this sensor");
+		rc = -EPERM;
+		goto out;
+	}
+
+	rc = 0;		/* Success */
+	ov->brightness = val;
+out:
+	if (ov51x_restart(ov) < 0)
+		return -EIO;
+
+	return rc;
+}
+
+/* Gets sensor's brightness setting */
+static int
+sensor_get_brightness(struct usb_ov511 *ov, unsigned short *val)
+{
+	int rc;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV76BE:
+	case SEN_OV7620:
+	case SEN_OV6620:
+	case SEN_OV6630:
+		rc = i2c_r(ov, OV7610_REG_BRT);
+		if (rc < 0)
+			return rc;
+		else
+			*val = rc << 8;
+		break;
+	case SEN_SAA7111A:
+		*val = ov->brightness;
+		break;
+	default:
+		PDEBUG(3, "Unsupported with this sensor");
+		return -EPERM;
+	}
+
+	PDEBUG(3, "%d", *val);
+	ov->brightness = *val;
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/* Sets sensor's saturation (color intensity) setting to "val" */
+static int
+sensor_set_saturation(struct usb_ov511 *ov, unsigned short val)
+{
+	int rc;
+
+	PDEBUG(3, "%d", val);
+
+	if (ov->stop_during_set)
+		if (ov51x_stop(ov) < 0)
+			return -EIO;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV76BE:
+	case SEN_OV6620:
+	case SEN_OV6630:
+		rc = i2c_w(ov, OV7610_REG_SAT, val >> 8);
+		if (rc < 0)
+			goto out;
+		break;
+	case SEN_OV7620:
+//		/* Use UV gamma control instead. Bits 0 & 7 are reserved. */
+//		rc = ov_i2c_write(ov->dev, 0x62, (val >> 9) & 0x7e);
+//		if (rc < 0)
+//			goto out;
+		rc = i2c_w(ov, OV7610_REG_SAT, val >> 8);
+		if (rc < 0)
+			goto out;
+		break;
+	case SEN_SAA7111A:
+		rc = i2c_w(ov, 0x0c, val >> 9);
+		if (rc < 0)
+			goto out;
+		break;
+	default:
+		PDEBUG(3, "Unsupported with this sensor");
+		rc = -EPERM;
+		goto out;
+	}
+
+	rc = 0;		/* Success */
+	ov->colour = val;
+out:
+	if (ov51x_restart(ov) < 0)
+		return -EIO;
+
+	return rc;
+}
+
+/* Gets sensor's saturation (color intensity) setting */
+static int
+sensor_get_saturation(struct usb_ov511 *ov, unsigned short *val)
+{
+	int rc;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV76BE:
+	case SEN_OV6620:
+	case SEN_OV6630:
+		rc = i2c_r(ov, OV7610_REG_SAT);
+		if (rc < 0)
+			return rc;
+		else
+			*val = rc << 8;
+		break;
+	case SEN_OV7620:
+//		/* Use UV gamma reg instead. Bits 0 & 7 are reserved. */
+//		rc = i2c_r(ov, 0x62);
+//		if (rc < 0)
+//			return rc;
+//		else
+//			*val = (rc & 0x7e) << 9;
+		rc = i2c_r(ov, OV7610_REG_SAT);
+		if (rc < 0)
+			return rc;
+		else
+			*val = rc << 8;
+		break;
+	case SEN_SAA7111A:
+		*val = ov->colour;
+		break;
+	default:
+		PDEBUG(3, "Unsupported with this sensor");
+		return -EPERM;
+	}
+
+	PDEBUG(3, "%d", *val);
+	ov->colour = *val;
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/* Sets sensor's hue (red/blue balance) setting to "val" */
+static int
+sensor_set_hue(struct usb_ov511 *ov, unsigned short val)
+{
+	int rc;
+
+	PDEBUG(3, "%d", val);
+
+	if (ov->stop_during_set)
+		if (ov51x_stop(ov) < 0)
+			return -EIO;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV6620:
+	case SEN_OV6630:
+		rc = i2c_w(ov, OV7610_REG_RED, 0xFF - (val >> 8));
+		if (rc < 0)
+			goto out;
+
+		rc = i2c_w(ov, OV7610_REG_BLUE, val >> 8);
+		if (rc < 0)
+			goto out;
+		break;
+	case SEN_OV7620:
+// Hue control is causing problems. I will enable it once it's fixed.
+#if 0
+		rc = i2c_w(ov, 0x7a, (unsigned char)(val >> 8) + 0xb);
+		if (rc < 0)
+			goto out;
+
+		rc = i2c_w(ov, 0x79, (unsigned char)(val >> 8) + 0xb);
+		if (rc < 0)
+			goto out;
+#endif
+		break;
+	case SEN_SAA7111A:
+		rc = i2c_w(ov, 0x0d, (val + 32768) >> 8);
+		if (rc < 0)
+			goto out;
+		break;
+	default:
+		PDEBUG(3, "Unsupported with this sensor");
+		rc = -EPERM;
+		goto out;
+	}
+
+	rc = 0;		/* Success */
+	ov->hue = val;
+out:
+	if (ov51x_restart(ov) < 0)
+		return -EIO;
+
+	return rc;
+}
+
+/* Gets sensor's hue (red/blue balance) setting */
+static int
+sensor_get_hue(struct usb_ov511 *ov, unsigned short *val)
+{
+	int rc;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV6620:
+	case SEN_OV6630:
+		rc = i2c_r(ov, OV7610_REG_BLUE);
+		if (rc < 0)
+			return rc;
+		else
+			*val = rc << 8;
+		break;
+	case SEN_OV7620:
+		rc = i2c_r(ov, 0x7a);
+		if (rc < 0)
+			return rc;
+		else
+			*val = rc << 8;
+		break;
+	case SEN_SAA7111A:
+		*val = ov->hue;
+		break;
+	default:
+		PDEBUG(3, "Unsupported with this sensor");
+		return -EPERM;
+	}
+
+	PDEBUG(3, "%d", *val);
+	ov->hue = *val;
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int
+sensor_set_picture(struct usb_ov511 *ov, struct video_picture *p)
+{
+	int rc;
+
+	PDEBUG(4, "sensor_set_picture");
+
+	ov->whiteness = p->whiteness;
+
+	/* Don't return error if a setting is unsupported, or rest of settings
+	 * will not be performed */
+
+	rc = sensor_set_contrast(ov, p->contrast);
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	rc = sensor_set_brightness(ov, p->brightness);
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	rc = sensor_set_saturation(ov, p->colour);
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	rc = sensor_set_hue(ov, p->hue);
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	return 0;
+}
+
+static int
+sensor_get_picture(struct usb_ov511 *ov, struct video_picture *p)
+{
+	int rc;
+
+	PDEBUG(4, "sensor_get_picture");
+
+	/* Don't return error if a setting is unsupported, or rest of settings
+	 * will not be performed */
+
+	rc = sensor_get_contrast(ov, &(p->contrast));
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	rc = sensor_get_brightness(ov, &(p->brightness));
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	rc = sensor_get_saturation(ov, &(p->colour));
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	rc = sensor_get_hue(ov, &(p->hue));
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	p->whiteness = 105 << 8;
+
+	return 0;
+}
+
+#if 0
+// FIXME: Exposure range is only 0x00-0x7f in interlace mode
+/* Sets current exposure for sensor. This only has an effect if auto-exposure
+ * is off */
+static inline int
+sensor_set_exposure(struct usb_ov511 *ov, unsigned char val)
+{
+	int rc;
+
+	PDEBUG(3, "%d", val);
+
+	if (ov->stop_during_set)
+		if (ov51x_stop(ov) < 0)
+			return -EIO;
+
+	switch (ov->sensor) {
+	case SEN_OV6620:
+	case SEN_OV6630:
+	case SEN_OV7610:
+	case SEN_OV7620:
+	case SEN_OV76BE:
+	case SEN_OV8600:
+		rc = i2c_w(ov, 0x10, val);
+		if (rc < 0)
+			goto out;
+
+		break;
+	case SEN_KS0127:
+	case SEN_KS0127B:
+	case SEN_SAA7111A:
+		PDEBUG(3, "Unsupported with this sensor");
+		return -EPERM;
+	default:
+		err("Sensor not supported for set_exposure");
+		return -EINVAL;
+	}
+
+	rc = 0;		/* Success */
+	ov->exposure = val;
+out:
+	if (ov51x_restart(ov) < 0)
+		return -EIO;
+
+	return rc;
+}
+#endif
+
+/* Gets current exposure level from sensor, regardless of whether it is under
+ * manual control. */
+static int
+sensor_get_exposure(struct usb_ov511 *ov, unsigned char *val)
+{
+	int rc;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV6620:
+	case SEN_OV6630:
+	case SEN_OV7620:
+	case SEN_OV76BE:
+	case SEN_OV8600:
+		rc = i2c_r(ov, 0x10);
+		if (rc < 0)
+			return rc;
+		else
+			*val = rc;
+		break;
+	case SEN_KS0127:
+	case SEN_KS0127B:
+	case SEN_SAA7111A:
+		val = NULL;
+		PDEBUG(3, "Unsupported with this sensor");
+		return -EPERM;
+	default:
+		err("Sensor not supported for get_exposure");
+		return -EINVAL;
+	}
+
+	PDEBUG(3, "%d", *val);
+	ov->exposure = *val;
+
+	return 0;
+}
+
+/* Turns on or off the LED. Only has an effect with OV511+/OV518(+) */
+static void
+ov51x_led_control(struct usb_ov511 *ov, int enable)
+{
+	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
+
+	if (ov->bridge == BRG_OV511PLUS)
+		reg_w(ov, R511_SYS_LED_CTL, enable ? 1 : 0);
+	else if (ov->bclass == BCL_OV518)
+		reg_w_mask(ov, R518_GPIO_OUT, enable ? 0x02 : 0x00, 0x02);
+
+	return;
+}
+
+/* Matches the sensor's internal frame rate to the lighting frequency.
+ * Valid frequencies are:
+ *	50 - 50Hz, for European and Asian lighting
+ *	60 - 60Hz, for American lighting
+ *
+ * Tested with: OV7610, OV7620, OV76BE, OV6620
+ * Unsupported: KS0127, KS0127B, SAA7111A
+ * Returns: 0 for success
+ */
+static int
+sensor_set_light_freq(struct usb_ov511 *ov, int freq)
+{
+	int sixty;
+
+	PDEBUG(4, "%d Hz", freq);
+
+	if (freq == 60)
+		sixty = 1;
+	else if (freq == 50)
+		sixty = 0;
+	else {
+		err("Invalid light freq (%d Hz)", freq);
+		return -EINVAL;
+	}
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+		i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80);
+		i2c_w(ov, 0x2b, sixty?0x00:0xac);
+		i2c_w_mask(ov, 0x13, 0x10, 0x10);
+		i2c_w_mask(ov, 0x13, 0x00, 0x10);
+		break;
+	case SEN_OV7620:
+	case SEN_OV76BE:
+	case SEN_OV8600:
+		i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80);
+		i2c_w(ov, 0x2b, sixty?0x00:0xac);
+		i2c_w_mask(ov, 0x76, 0x01, 0x01);
+		break;
+	case SEN_OV6620:
+	case SEN_OV6630:
+		i2c_w(ov, 0x2b, sixty?0xa8:0x28);
+		i2c_w(ov, 0x2a, sixty?0x84:0xa4);
+		break;
+	case SEN_KS0127:
+	case SEN_KS0127B:
+	case SEN_SAA7111A:
+		PDEBUG(5, "Unsupported with this sensor");
+		return -EPERM;
+	default:
+		err("Sensor not supported for set_light_freq");
+		return -EINVAL;
+	}
+
+	ov->lightfreq = freq;
+
+	return 0;
+}
+
+/* If enable is true, turn on the sensor's banding filter, otherwise turn it
+ * off. This filter tries to reduce the pattern of horizontal light/dark bands
+ * caused by some (usually fluorescent) lighting. The light frequency must be
+ * set either before or after enabling it with ov51x_set_light_freq().
+ *
+ * Tested with: OV7610, OV7620, OV76BE, OV6620.
+ * Unsupported: KS0127, KS0127B, SAA7111A
+ * Returns: 0 for success
+ */
+static int
+sensor_set_banding_filter(struct usb_ov511 *ov, int enable)
+{
+	int rc;
+
+	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
+
+	if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B
+		|| ov->sensor == SEN_SAA7111A) {
+		PDEBUG(5, "Unsupported with this sensor");
+		return -EPERM;
+	}
+
+	rc = i2c_w_mask(ov, 0x2d, enable?0x04:0x00, 0x04);
+	if (rc < 0)
+		return rc;
+
+	ov->bandfilt = enable;
+
+	return 0;
+}
+
+/* If enable is true, turn on the sensor's auto brightness control, otherwise
+ * turn it off.
+ *
+ * Unsupported: KS0127, KS0127B, SAA7111A
+ * Returns: 0 for success
+ */
+static int
+sensor_set_auto_brightness(struct usb_ov511 *ov, int enable)
+{
+	int rc;
+
+	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
+
+	if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B
+		|| ov->sensor == SEN_SAA7111A) {
+		PDEBUG(5, "Unsupported with this sensor");
+		return -EPERM;
+	}
+
+	rc = i2c_w_mask(ov, 0x2d, enable?0x10:0x00, 0x10);
+	if (rc < 0)
+		return rc;
+
+	ov->auto_brt = enable;
+
+	return 0;
+}
+
+/* If enable is true, turn on the sensor's auto exposure control, otherwise
+ * turn it off.
+ *
+ * Unsupported: KS0127, KS0127B, SAA7111A
+ * Returns: 0 for success
+ */
+static int
+sensor_set_auto_exposure(struct usb_ov511 *ov, int enable)
+{
+	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+		i2c_w_mask(ov, 0x29, enable?0x00:0x80, 0x80);
+		break;
+	case SEN_OV6620:
+	case SEN_OV7620:
+	case SEN_OV76BE:
+	case SEN_OV8600:
+		i2c_w_mask(ov, 0x13, enable?0x01:0x00, 0x01);
+		break;
+	case SEN_OV6630:
+		i2c_w_mask(ov, 0x28, enable?0x00:0x10, 0x10);
+		break;
+	case SEN_KS0127:
+	case SEN_KS0127B:
+	case SEN_SAA7111A:
+		PDEBUG(5, "Unsupported with this sensor");
+		return -EPERM;
+	default:
+		err("Sensor not supported for set_auto_exposure");
+		return -EINVAL;
+	}
+
+	ov->auto_exp = enable;
+
+	return 0;
+}
+
+/* Modifies the sensor's exposure algorithm to allow proper exposure of objects
+ * that are illuminated from behind.
+ *
+ * Tested with: OV6620, OV7620
+ * Unsupported: OV7610, OV76BE, KS0127, KS0127B, SAA7111A
+ * Returns: 0 for success
+ */
+static int
+sensor_set_backlight(struct usb_ov511 *ov, int enable)
+{
+	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
+
+	switch (ov->sensor) {
+	case SEN_OV7620:
+	case SEN_OV8600:
+		i2c_w_mask(ov, 0x68, enable?0xe0:0xc0, 0xe0);
+		i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08);
+		i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02);
+		break;
+	case SEN_OV6620:
+		i2c_w_mask(ov, 0x4e, enable?0xe0:0xc0, 0xe0);
+		i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08);
+		i2c_w_mask(ov, 0x0e, enable?0x80:0x00, 0x80);
+		break;
+	case SEN_OV6630:
+		i2c_w_mask(ov, 0x4e, enable?0x80:0x60, 0xe0);
+		i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08);
+		i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02);
+		break;
+	case SEN_OV7610:
+	case SEN_OV76BE:
+	case SEN_KS0127:
+	case SEN_KS0127B:
+	case SEN_SAA7111A:
+		PDEBUG(5, "Unsupported with this sensor");
+		return -EPERM;
+	default:
+		err("Sensor not supported for set_backlight");
+		return -EINVAL;
+	}
+
+	ov->backlight = enable;
+
+	return 0;
+}
+
+static int
+sensor_set_mirror(struct usb_ov511 *ov, int enable)
+{
+	PDEBUG(4, " (%s)", enable ? "turn on" : "turn off");
+
+	switch (ov->sensor) {
+	case SEN_OV6620:
+	case SEN_OV6630:
+	case SEN_OV7610:
+	case SEN_OV7620:
+	case SEN_OV76BE:
+	case SEN_OV8600:
+		i2c_w_mask(ov, 0x12, enable?0x40:0x00, 0x40);
+		break;
+	case SEN_KS0127:
+	case SEN_KS0127B:
+	case SEN_SAA7111A:
+		PDEBUG(5, "Unsupported with this sensor");
+		return -EPERM;
+	default:
+		err("Sensor not supported for set_mirror");
+		return -EINVAL;
+	}
+
+	ov->mirror = enable;
+
+	return 0;
+}
+
+/* Returns number of bits per pixel (regardless of where they are located;
+ * planar or not), or zero for unsupported format.
+ */
+static inline int
+get_depth(int palette)
+{
+	switch (palette) {
+	case VIDEO_PALETTE_GREY:    return 8;
+	case VIDEO_PALETTE_YUV420:  return 12;
+	case VIDEO_PALETTE_YUV420P: return 12; /* Planar */
+	default:		    return 0;  /* Invalid format */
+	}
+}
+
+/* Bytes per frame. Used by read(). Return of 0 indicates error */
+static inline long int
+get_frame_length(struct ov511_frame *frame)
+{
+	if (!frame)
+		return 0;
+	else
+		return ((frame->width * frame->height
+			 * get_depth(frame->format)) >> 3);
+}
+
+static int
+mode_init_ov_sensor_regs(struct usb_ov511 *ov, int width, int height,
+			 int mode, int sub_flag, int qvga)
+{
+	int clock;
+
+	/******** Mode (VGA/QVGA) and sensor specific regs ********/
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+		i2c_w(ov, 0x14, qvga?0x24:0x04);
+// FIXME: Does this improve the image quality or frame rate?
+#if 0
+		i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20);
+		i2c_w(ov, 0x24, 0x10);
+		i2c_w(ov, 0x25, qvga?0x40:0x8a);
+		i2c_w(ov, 0x2f, qvga?0x30:0xb0);
+		i2c_w(ov, 0x35, qvga?0x1c:0x9c);
+#endif
+		break;
+	case SEN_OV7620:
+//		i2c_w(ov, 0x2b, 0x00);
+		i2c_w(ov, 0x14, qvga?0xa4:0x84);
+		i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20);
+		i2c_w(ov, 0x24, qvga?0x20:0x3a);
+		i2c_w(ov, 0x25, qvga?0x30:0x60);
+		i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40);
+		i2c_w_mask(ov, 0x67, qvga?0xf0:0x90, 0xf0);
+		i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20);
+		break;
+	case SEN_OV76BE:
+//		i2c_w(ov, 0x2b, 0x00);
+		i2c_w(ov, 0x14, qvga?0xa4:0x84);
+// FIXME: Enable this once 7620AE uses 7620 initial settings
+#if 0
+		i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20);
+		i2c_w(ov, 0x24, qvga?0x20:0x3a);
+		i2c_w(ov, 0x25, qvga?0x30:0x60);
+		i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40);
+		i2c_w_mask(ov, 0x67, qvga?0xb0:0x90, 0xf0);
+		i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20);
+#endif
+		break;
+	case SEN_OV6620:
+		i2c_w(ov, 0x14, qvga?0x24:0x04);
+		break;
+	case SEN_OV6630:
+		i2c_w(ov, 0x14, qvga?0xa0:0x80);
+		break;
+	default:
+		err("Invalid sensor");
+		return -EINVAL;
+	}
+
+	/******** Palette-specific regs ********/
+
+	if (mode == VIDEO_PALETTE_GREY) {
+		if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) {
+			/* these aren't valid on the OV6620/OV7620/6630? */
+			i2c_w_mask(ov, 0x0e, 0x40, 0x40);
+		}
+
+		if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518
+		    && ov518_color) {
+			i2c_w_mask(ov, 0x12, 0x00, 0x10);
+			i2c_w_mask(ov, 0x13, 0x00, 0x20);
+		} else {
+			i2c_w_mask(ov, 0x13, 0x20, 0x20);
+		}
+	} else {
+		if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) {
+			/* not valid on the OV6620/OV7620/6630? */
+			i2c_w_mask(ov, 0x0e, 0x00, 0x40);
+		}
+
+		/* The OV518 needs special treatment. Although both the OV518
+		 * and the OV6630 support a 16-bit video bus, only the 8 bit Y
+		 * bus is actually used. The UV bus is tied to ground.
+		 * Therefore, the OV6630 needs to be in 8-bit multiplexed
+		 * output mode */
+
+		if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518
+		    && ov518_color) {
+			i2c_w_mask(ov, 0x12, 0x10, 0x10);
+			i2c_w_mask(ov, 0x13, 0x20, 0x20);
+		} else {
+			i2c_w_mask(ov, 0x13, 0x00, 0x20);
+		}
+	}
+
+	/******** Clock programming ********/
+
+	/* The OV6620 needs special handling. This prevents the
+	 * severe banding that normally occurs */
+	if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630)
+	{
+		/* Clock down */
+
+		i2c_w(ov, 0x2a, 0x04);
+
+		if (ov->compress) {
+//			clock = 0;    /* This ensures the highest frame rate */
+			clock = 3;
+		} else if (clockdiv == -1) {   /* If user didn't override it */
+			clock = 3;    /* Gives better exposure time */
+		} else {
+			clock = clockdiv;
+		}
+
+		PDEBUG(4, "Setting clock divisor to %d", clock);
+
+		i2c_w(ov, 0x11, clock);
+
+		i2c_w(ov, 0x2a, 0x84);
+		/* This next setting is critical. It seems to improve
+		 * the gain or the contrast. The "reserved" bits seem
+		 * to have some effect in this case. */
+		i2c_w(ov, 0x2d, 0x85);
+	}
+	else
+	{
+		if (ov->compress) {
+			clock = 1;    /* This ensures the highest frame rate */
+		} else if (clockdiv == -1) {   /* If user didn't override it */
+			/* Calculate and set the clock divisor */
+			clock = ((sub_flag ? ov->subw * ov->subh
+				  : width * height)
+				 * (mode == VIDEO_PALETTE_GREY ? 2 : 3) / 2)
+				 / 66000;
+		} else {
+			clock = clockdiv;
+		}
+
+		PDEBUG(4, "Setting clock divisor to %d", clock);
+
+		i2c_w(ov, 0x11, clock);
+	}
+
+	/******** Special Features ********/
+
+	if (framedrop >= 0)
+		i2c_w(ov, 0x16, framedrop);
+
+	/* Test Pattern */
+	i2c_w_mask(ov, 0x12, (testpat?0x02:0x00), 0x02);
+
+	/* Enable auto white balance */
+	i2c_w_mask(ov, 0x12, 0x04, 0x04);
+
+	// This will go away as soon as ov51x_mode_init_sensor_regs()
+	// is fully tested.
+	/* 7620/6620/6630? don't have register 0x35, so play it safe */
+	if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) {
+		if (width == 640 && height == 480)
+			i2c_w(ov, 0x35, 0x9e);
+		else
+			i2c_w(ov, 0x35, 0x1e);
+	}
+
+	return 0;
+}
+
+static int
+set_ov_sensor_window(struct usb_ov511 *ov, int width, int height, int mode,
+		     int sub_flag)
+{
+	int ret;
+	int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize;
+	int hoffset, voffset, hwscale = 0, vwscale = 0;
+
+	/* The different sensor ICs handle setting up of window differently.
+	 * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!!! */
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV76BE:
+		hwsbase = 0x38;
+		hwebase = 0x3a;
+		vwsbase = vwebase = 0x05;
+		break;
+	case SEN_OV6620:
+	case SEN_OV6630:
+		hwsbase = 0x38;
+		hwebase = 0x3a;
+		vwsbase = 0x05;
+		vwebase = 0x06;
+		break;
+	case SEN_OV7620:
+		hwsbase = 0x2f;		/* From 7620.SET (spec is wrong) */
+		hwebase = 0x2f;
+		vwsbase = vwebase = 0x05;
+		break;
+	default:
+		err("Invalid sensor");
+		return -EINVAL;
+	}
+
+	if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) {
+		/* Note: OV518(+) does downsample on its own) */
+		if ((width > 176 && height > 144)
+		    || ov->bclass == BCL_OV518) {  /* CIF */
+			ret = mode_init_ov_sensor_regs(ov, width, height,
+				mode, sub_flag, 0);
+			if (ret < 0)
+				return ret;
+			hwscale = 1;
+			vwscale = 1;  /* The datasheet says 0; it's wrong */
+			hwsize = 352;
+			vwsize = 288;
+		} else if (width > 176 || height > 144) {
+			err("Illegal dimensions");
+			return -EINVAL;
+		} else {			    /* QCIF */
+			ret = mode_init_ov_sensor_regs(ov, width, height,
+				mode, sub_flag, 1);
+			if (ret < 0)
+				return ret;
+			hwsize = 176;
+			vwsize = 144;
+		}
+	} else {
+		if (width > 320 && height > 240) {  /* VGA */
+			ret = mode_init_ov_sensor_regs(ov, width, height,
+				mode, sub_flag, 0);
+			if (ret < 0)
+				return ret;
+			hwscale = 2;
+			vwscale = 1;
+			hwsize = 640;
+			vwsize = 480;
+		} else if (width > 320 || height > 240) {
+			err("Illegal dimensions");
+			return -EINVAL;
+		} else {			    /* QVGA */
+			ret = mode_init_ov_sensor_regs(ov, width, height,
+				mode, sub_flag, 1);
+			if (ret < 0)
+				return ret;
+			hwscale = 1;
+			hwsize = 320;
+			vwsize = 240;
+		}
+	}
+
+	/* Center the window */
+	hoffset = ((hwsize - width) / 2) >> hwscale;
+	voffset = ((vwsize - height) / 2) >> vwscale;
+
+	/* FIXME! - This needs to be changed to support 160x120 and 6620!!! */
+	if (sub_flag) {
+		i2c_w(ov, 0x17, hwsbase+(ov->subx>>hwscale));
+		i2c_w(ov, 0x18,	hwebase+((ov->subx+ov->subw)>>hwscale));
+		i2c_w(ov, 0x19, vwsbase+(ov->suby>>vwscale));
+		i2c_w(ov, 0x1a, vwebase+((ov->suby+ov->subh)>>vwscale));
+	} else {
+		i2c_w(ov, 0x17, hwsbase + hoffset);
+		i2c_w(ov, 0x18, hwebase + hoffset + (hwsize>>hwscale));
+		i2c_w(ov, 0x19, vwsbase + voffset);
+		i2c_w(ov, 0x1a, vwebase + voffset + (vwsize>>vwscale));
+	}
+
+#ifdef OV511_DEBUG
+	if (dump_sensor)
+		dump_i2c_regs(ov);
+#endif
+
+	return 0;
+}
+
+/* Set up the OV511/OV511+ with the given image parameters.
+ *
+ * Do not put any sensor-specific code in here (including I2C I/O functions)
+ */
+static int
+ov511_mode_init_regs(struct usb_ov511 *ov,
+		     int width, int height, int mode, int sub_flag)
+{
+	int hsegs, vsegs;
+
+	if (sub_flag) {
+		width = ov->subw;
+		height = ov->subh;
+	}
+
+	PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d",
+	       width, height, mode, sub_flag);
+
+	// FIXME: This should be moved to a 7111a-specific function once
+	// subcapture is dealt with properly
+	if (ov->sensor == SEN_SAA7111A) {
+		if (width == 320 && height == 240) {
+			/* No need to do anything special */
+		} else if (width == 640 && height == 480) {
+			/* Set the OV511 up as 320x480, but keep the
+			 * V4L resolution as 640x480 */
+			width = 320;
+		} else {
+			err("SAA7111A only allows 320x240 or 640x480");
+			return -EINVAL;
+		}
+	}
+
+	/* Make sure width and height are a multiple of 8 */
+	if (width % 8 || height % 8) {
+		err("Invalid size (%d, %d) (mode = %d)", width, height, mode);
+		return -EINVAL;
+	}
+
+	if (width < ov->minwidth || height < ov->minheight) {
+		err("Requested dimensions are too small");
+		return -EINVAL;
+	}
+
+	if (ov51x_stop(ov) < 0)
+		return -EIO;
+
+	if (mode == VIDEO_PALETTE_GREY) {
+		reg_w(ov, R511_CAM_UV_EN, 0x00);
+		reg_w(ov, R511_SNAP_UV_EN, 0x00);
+		reg_w(ov, R511_SNAP_OPTS, 0x01);
+	} else {
+		reg_w(ov, R511_CAM_UV_EN, 0x01);
+		reg_w(ov, R511_SNAP_UV_EN, 0x01);
+		reg_w(ov, R511_SNAP_OPTS, 0x03);
+	}
+
+	/* Here I'm assuming that snapshot size == image size.
+	 * I hope that's always true. --claudio
+	 */
+	hsegs = (width >> 3) - 1;
+	vsegs = (height >> 3) - 1;
+
+	reg_w(ov, R511_CAM_PXCNT, hsegs);
+	reg_w(ov, R511_CAM_LNCNT, vsegs);
+	reg_w(ov, R511_CAM_PXDIV, 0x00);
+	reg_w(ov, R511_CAM_LNDIV, 0x00);
+
+	/* YUV420, low pass filter on */
+	reg_w(ov, R511_CAM_OPTS, 0x03);
+
+	/* Snapshot additions */
+	reg_w(ov, R511_SNAP_PXCNT, hsegs);
+	reg_w(ov, R511_SNAP_LNCNT, vsegs);
+	reg_w(ov, R511_SNAP_PXDIV, 0x00);
+	reg_w(ov, R511_SNAP_LNDIV, 0x00);
+
+	if (ov->compress) {
+		/* Enable Y and UV quantization and compression */
+		reg_w(ov, R511_COMP_EN, 0x07);
+		reg_w(ov, R511_COMP_LUT_EN, 0x03);
+		ov51x_reset(ov, OV511_RESET_OMNICE);
+	}
+
+	if (ov51x_restart(ov) < 0)
+		return -EIO;
+
+	return 0;
+}
+
+/* Sets up the OV518/OV518+ with the given image parameters
+ *
+ * OV518 needs a completely different approach, until we can figure out what
+ * the individual registers do. Also, only 15 FPS is supported now.
+ *
+ * Do not put any sensor-specific code in here (including I2C I/O functions)
+ */
+static int
+ov518_mode_init_regs(struct usb_ov511 *ov,
+		     int width, int height, int mode, int sub_flag)
+{
+	int hsegs, vsegs, hi_res;
+
+	if (sub_flag) {
+		width = ov->subw;
+		height = ov->subh;
+	}
+
+	PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d",
+	       width, height, mode, sub_flag);
+
+	if (width % 16 || height % 8) {
+		err("Invalid size (%d, %d)", width, height);
+		return -EINVAL;
+	}
+
+	if (width < ov->minwidth || height < ov->minheight) {
+		err("Requested dimensions are too small");
+		return -EINVAL;
+	}
+
+	if (width >= 320 && height >= 240) {
+		hi_res = 1;
+	} else if (width >= 320 || height >= 240) {
+		err("Invalid width/height combination (%d, %d)", width, height);
+		return -EINVAL;
+	} else {
+		hi_res = 0;
+	}
+
+	if (ov51x_stop(ov) < 0)
+		return -EIO;
+
+	/******** Set the mode ********/
+
+	reg_w(ov, 0x2b, 0);
+	reg_w(ov, 0x2c, 0);
+	reg_w(ov, 0x2d, 0);
+	reg_w(ov, 0x2e, 0);
+	reg_w(ov, 0x3b, 0);
+	reg_w(ov, 0x3c, 0);
+	reg_w(ov, 0x3d, 0);
+	reg_w(ov, 0x3e, 0);
+
+	if (ov->bridge == BRG_OV518 && ov518_color) {
+		/* OV518 needs U and V swapped */
+		i2c_w_mask(ov, 0x15, 0x00, 0x01);
+
+		if (mode == VIDEO_PALETTE_GREY) {
+			/* Set 16-bit input format (UV data are ignored) */
+			reg_w_mask(ov, 0x20, 0x00, 0x08);
+
+			/* Set 8-bit (4:0:0) output format */
+			reg_w_mask(ov, 0x28, 0x00, 0xf0);
+			reg_w_mask(ov, 0x38, 0x00, 0xf0);
+		} else {
+			/* Set 8-bit (YVYU) input format */
+			reg_w_mask(ov, 0x20, 0x08, 0x08);
+
+			/* Set 12-bit (4:2:0) output format */
+			reg_w_mask(ov, 0x28, 0x80, 0xf0);
+			reg_w_mask(ov, 0x38, 0x80, 0xf0);
+		}
+	} else {
+		reg_w(ov, 0x28, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80);
+		reg_w(ov, 0x38, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80);
+	}
+
+	hsegs = width / 16;
+	vsegs = height / 4;
+
+	reg_w(ov, 0x29, hsegs);
+	reg_w(ov, 0x2a, vsegs);
+
+	reg_w(ov, 0x39, hsegs);
+	reg_w(ov, 0x3a, vsegs);
+
+	/* Windows driver does this here; who knows why */
+	reg_w(ov, 0x2f, 0x80);
+
+	/******** Set the framerate (to 15 FPS) ********/
+
+	/* Mode independent, but framerate dependent, regs */
+	reg_w(ov, 0x51, 0x02);	/* Clock divider; lower==faster */
+	reg_w(ov, 0x22, 0x18);
+	reg_w(ov, 0x23, 0xff);
+
+	if (ov->bridge == BRG_OV518PLUS)
+		reg_w(ov, 0x21, 0x19);
+	else
+		reg_w(ov, 0x71, 0x19);	/* Compression-related? */
+
+	// FIXME: Sensor-specific
+	/* Bit 5 is what matters here. Of course, it is "reserved" */
+	i2c_w(ov, 0x54, 0x23);
+
+	reg_w(ov, 0x2f, 0x80);
+
+	if (ov->bridge == BRG_OV518PLUS) {
+		reg_w(ov, 0x24, 0x94);
+		reg_w(ov, 0x25, 0x90);
+		ov518_reg_w32(ov, 0xc4,    400, 2);	/* 190h   */
+		ov518_reg_w32(ov, 0xc6,    540, 2);	/* 21ch   */
+		ov518_reg_w32(ov, 0xc7,    540, 2);	/* 21ch   */
+		ov518_reg_w32(ov, 0xc8,    108, 2);	/* 6ch    */
+		ov518_reg_w32(ov, 0xca, 131098, 3);	/* 2001ah */
+		ov518_reg_w32(ov, 0xcb,    532, 2);	/* 214h   */
+		ov518_reg_w32(ov, 0xcc,   2400, 2);	/* 960h   */
+		ov518_reg_w32(ov, 0xcd,     32, 2);	/* 20h    */
+		ov518_reg_w32(ov, 0xce,    608, 2);	/* 260h   */
+	} else {
+		reg_w(ov, 0x24, 0x9f);
+		reg_w(ov, 0x25, 0x90);
+		ov518_reg_w32(ov, 0xc4,    400, 2);	/* 190h   */
+		ov518_reg_w32(ov, 0xc6,    500, 2);	/* 1f4h   */
+		ov518_reg_w32(ov, 0xc7,    500, 2);	/* 1f4h   */
+		ov518_reg_w32(ov, 0xc8,    142, 2);	/* 8eh    */
+		ov518_reg_w32(ov, 0xca, 131098, 3);	/* 2001ah */
+		ov518_reg_w32(ov, 0xcb,    532, 2);	/* 214h   */
+		ov518_reg_w32(ov, 0xcc,   2000, 2);	/* 7d0h   */
+		ov518_reg_w32(ov, 0xcd,     32, 2);	/* 20h    */
+		ov518_reg_w32(ov, 0xce,    608, 2);	/* 260h   */
+	}
+
+	reg_w(ov, 0x2f, 0x80);
+
+	if (ov51x_restart(ov) < 0)
+		return -EIO;
+
+	/* Reset it just for good measure */
+	if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0)
+		return -EIO;
+
+	return 0;
+}
+
+/* This is a wrapper around the OV511, OV518, and sensor specific functions */
+static int
+mode_init_regs(struct usb_ov511 *ov,
+	       int width, int height, int mode, int sub_flag)
+{
+	int rc = 0;
+
+	if (!ov || !ov->dev)
+		return -EFAULT;
+
+	if (ov->bclass == BCL_OV518) {
+		rc = ov518_mode_init_regs(ov, width, height, mode, sub_flag);
+	} else {
+		rc = ov511_mode_init_regs(ov, width, height, mode, sub_flag);
+	}
+
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	switch (ov->sensor) {
+	case SEN_OV7610:
+	case SEN_OV7620:
+	case SEN_OV76BE:
+	case SEN_OV8600:
+	case SEN_OV6620:
+	case SEN_OV6630:
+		rc = set_ov_sensor_window(ov, width, height, mode, sub_flag);
+		break;
+	case SEN_KS0127:
+	case SEN_KS0127B:
+		err("KS0127-series decoders not supported yet");
+		rc = -EINVAL;
+		break;
+	case SEN_SAA7111A:
+//		rc = mode_init_saa_sensor_regs(ov, width, height, mode,
+//					       sub_flag);
+
+		PDEBUG(1, "SAA status = 0x%02X", i2c_r(ov, 0x1f));
+		break;
+	default:
+		err("Unknown sensor");
+		rc = -EINVAL;
+	}
+
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	/* Sensor-independent settings */
+	rc = sensor_set_auto_brightness(ov, ov->auto_brt);
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	rc = sensor_set_auto_exposure(ov, ov->auto_exp);
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	rc = sensor_set_banding_filter(ov, bandingfilter);
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	if (ov->lightfreq) {
+		rc = sensor_set_light_freq(ov, lightfreq);
+		if (FATAL_ERROR(rc))
+			return rc;
+	}
+
+	rc = sensor_set_backlight(ov, ov->backlight);
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	rc = sensor_set_mirror(ov, ov->mirror);
+	if (FATAL_ERROR(rc))
+		return rc;
+
+	return 0;
+}
+
+/* This sets the default image parameters. This is useful for apps that use
+ * read() and do not set these.
+ */
+static int
+ov51x_set_default_params(struct usb_ov511 *ov)
+{
+	int i;
+
+	/* Set default sizes in case IOCTL (VIDIOCMCAPTURE) is not used
+	 * (using read() instead). */
+	for (i = 0; i < OV511_NUMFRAMES; i++) {
+		ov->frame[i].width = ov->maxwidth;
+		ov->frame[i].height = ov->maxheight;
+		ov->frame[i].bytes_read = 0;
+		if (force_palette)
+			ov->frame[i].format = force_palette;
+		else
+			ov->frame[i].format = VIDEO_PALETTE_YUV420;
+
+		ov->frame[i].depth = get_depth(ov->frame[i].format);
+	}
+
+	PDEBUG(3, "%dx%d, %s", ov->maxwidth, ov->maxheight,
+	       symbolic(v4l1_plist, ov->frame[0].format));
+
+	/* Initialize to max width/height, YUV420 or RGB24 (if supported) */
+	if (mode_init_regs(ov, ov->maxwidth, ov->maxheight,
+			   ov->frame[0].format, 0) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**********************************************************************
+ *
+ * Video decoder stuff
+ *
+ **********************************************************************/
+
+/* Set analog input port of decoder */
+static int
+decoder_set_input(struct usb_ov511 *ov, int input)
+{
+	PDEBUG(4, "port %d", input);
+
+	switch (ov->sensor) {
+	case SEN_SAA7111A:
+	{
+		/* Select mode */
+		i2c_w_mask(ov, 0x02, input, 0x07);
+		/* Bypass chrominance trap for modes 4..7 */
+		i2c_w_mask(ov, 0x09, (input > 3) ? 0x80:0x00, 0x80);
+		break;
+	}
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Get ASCII name of video input */
+static int
+decoder_get_input_name(struct usb_ov511 *ov, int input, char *name)
+{
+	switch (ov->sensor) {
+	case SEN_SAA7111A:
+	{
+		if (input < 0 || input > 7)
+			return -EINVAL;
+		else if (input < 4)
+			sprintf(name, "CVBS-%d", input);
+		else // if (input < 8)
+			sprintf(name, "S-Video-%d", input - 4);
+		break;
+	}
+	default:
+		sprintf(name, "%s", "Camera");
+	}
+
+	return 0;
+}
+
+/* Set norm (NTSC, PAL, SECAM, AUTO) */
+static int
+decoder_set_norm(struct usb_ov511 *ov, int norm)
+{
+	PDEBUG(4, "%d", norm);
+
+	switch (ov->sensor) {
+	case SEN_SAA7111A:
+	{
+		int reg_8, reg_e;
+
+		if (norm == VIDEO_MODE_NTSC) {
+			reg_8 = 0x40;	/* 60 Hz */
+			reg_e = 0x00;	/* NTSC M / PAL BGHI */
+		} else if (norm == VIDEO_MODE_PAL) {
+			reg_8 = 0x00;	/* 50 Hz */
+			reg_e = 0x00;	/* NTSC M / PAL BGHI */
+		} else if (norm == VIDEO_MODE_AUTO) {
+			reg_8 = 0x80;	/* Auto field detect */
+			reg_e = 0x00;	/* NTSC M / PAL BGHI */
+		} else if (norm == VIDEO_MODE_SECAM) {
+			reg_8 = 0x00;	/* 50 Hz */
+			reg_e = 0x50;	/* SECAM / PAL 4.43 */
+		} else {
+			return -EINVAL;
+		}
+
+		i2c_w_mask(ov, 0x08, reg_8, 0xc0);
+		i2c_w_mask(ov, 0x0e, reg_e, 0x70);
+		break;
+	}
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**********************************************************************
+ *
+ * Raw data parsing
+ *
+ **********************************************************************/
+
+/* Copies a 64-byte segment at pIn to an 8x8 block at pOut. The width of the
+ * image at pOut is specified by w.
+ */
+static inline void
+make_8x8(unsigned char *pIn, unsigned char *pOut, int w)
+{
+	unsigned char *pOut1 = pOut;
+	int x, y;
+
+	for (y = 0; y < 8; y++) {
+		pOut1 = pOut;
+		for (x = 0; x < 8; x++) {
+			*pOut1++ = *pIn++;
+		}
+		pOut += w;
+	}
+}
+
+/*
+ * For RAW BW (YUV 4:0:0) images, data show up in 256 byte segments.
+ * The segments represent 4 squares of 8x8 pixels as follows:
+ *
+ *      0  1 ...  7    64  65 ...  71   ...  192 193 ... 199
+ *      8  9 ... 15    72  73 ...  79        200 201 ... 207
+ *           ...              ...                    ...
+ *     56 57 ... 63   120 121 ... 127        248 249 ... 255
+ *
+ */
+static void
+yuv400raw_to_yuv400p(struct ov511_frame *frame,
+		     unsigned char *pIn0, unsigned char *pOut0)
+{
+	int x, y;
+	unsigned char *pIn, *pOut, *pOutLine;
+
+	/* Copy Y */
+	pIn = pIn0;
+	pOutLine = pOut0;
+	for (y = 0; y < frame->rawheight - 1; y += 8) {
+		pOut = pOutLine;
+		for (x = 0; x < frame->rawwidth - 1; x += 8) {
+			make_8x8(pIn, pOut, frame->rawwidth);
+			pIn += 64;
+			pOut += 8;
+		}
+		pOutLine += 8 * frame->rawwidth;
+	}
+}
+
+/*
+ * For YUV 4:2:0 images, the data show up in 384 byte segments.
+ * The first 64 bytes of each segment are U, the next 64 are V.  The U and
+ * V are arranged as follows:
+ *
+ *      0  1 ...  7
+ *      8  9 ... 15
+ *           ...
+ *     56 57 ... 63
+ *
+ * U and V are shipped at half resolution (1 U,V sample -> one 2x2 block).
+ *
+ * The next 256 bytes are full resolution Y data and represent 4 squares
+ * of 8x8 pixels as follows:
+ *
+ *      0  1 ...  7    64  65 ...  71   ...  192 193 ... 199
+ *      8  9 ... 15    72  73 ...  79        200 201 ... 207
+ *           ...              ...                    ...
+ *     56 57 ... 63   120 121 ... 127   ...  248 249 ... 255
+ *
+ * Note that the U and V data in one segment represent a 16 x 16 pixel
+ * area, but the Y data represent a 32 x 8 pixel area. If the width is not an
+ * even multiple of 32, the extra 8x8 blocks within a 32x8 block belong to the
+ * next horizontal stripe.
+ *
+ * If dumppix module param is set, _parse_data just dumps the incoming segments,
+ * verbatim, in order, into the frame. When used with vidcat -f ppm -s 640x480
+ * this puts the data on the standard output and can be analyzed with the
+ * parseppm.c utility I wrote.  That's a much faster way for figuring out how
+ * these data are scrambled.
+ */
+
+/* Converts from raw, uncompressed segments at pIn0 to a YUV420P frame at pOut0.
+ *
+ * FIXME: Currently only handles width and height that are multiples of 16
+ */
+static void
+yuv420raw_to_yuv420p(struct ov511_frame *frame,
+		     unsigned char *pIn0, unsigned char *pOut0)
+{
+	int k, x, y;
+	unsigned char *pIn, *pOut, *pOutLine;
+	const unsigned int a = frame->rawwidth * frame->rawheight;
+	const unsigned int w = frame->rawwidth / 2;
+
+	/* Copy U and V */
+	pIn = pIn0;
+	pOutLine = pOut0 + a;
+	for (y = 0; y < frame->rawheight - 1; y += 16) {
+		pOut = pOutLine;
+		for (x = 0; x < frame->rawwidth - 1; x += 16) {
+			make_8x8(pIn, pOut, w);
+			make_8x8(pIn + 64, pOut + a/4, w);
+			pIn += 384;
+			pOut += 8;
+		}
+		pOutLine += 8 * w;
+	}
+
+	/* Copy Y */
+	pIn = pIn0 + 128;
+	pOutLine = pOut0;
+	k = 0;
+	for (y = 0; y < frame->rawheight - 1; y += 8) {
+		pOut = pOutLine;
+		for (x = 0; x < frame->rawwidth - 1; x += 8) {
+			make_8x8(pIn, pOut, frame->rawwidth);
+			pIn += 64;
+			pOut += 8;
+			if ((++k) > 3) {
+				k = 0;
+				pIn += 128;
+			}
+		}
+		pOutLine += 8 * frame->rawwidth;
+	}
+}
+
+/**********************************************************************
+ *
+ * Decompression
+ *
+ **********************************************************************/
+
+static int
+request_decompressor(struct usb_ov511 *ov)
+{
+	if (ov->bclass == BCL_OV511 || ov->bclass == BCL_OV518) {
+		err("No decompressor available");
+	} else {
+		err("Unknown bridge");
+	}
+
+	return -ENOSYS;
+}
+
+static void
+decompress(struct usb_ov511 *ov, struct ov511_frame *frame,
+	   unsigned char *pIn0, unsigned char *pOut0)
+{
+	if (!ov->decomp_ops)
+		if (request_decompressor(ov))
+			return;
+
+}
+
+/**********************************************************************
+ *
+ * Format conversion
+ *
+ **********************************************************************/
+
+/* Fuses even and odd fields together, and doubles width.
+ * INPUT: an odd field followed by an even field at pIn0, in YUV planar format
+ * OUTPUT: a normal YUV planar image, with correct aspect ratio
+ */
+static void
+deinterlace(struct ov511_frame *frame, int rawformat,
+	    unsigned char *pIn0, unsigned char *pOut0)
+{
+	const int fieldheight = frame->rawheight / 2;
+	const int fieldpix = fieldheight * frame->rawwidth;
+	const int w = frame->width;
+	int x, y;
+	unsigned char *pInEven, *pInOdd, *pOut;
+
+	PDEBUG(5, "fieldheight=%d", fieldheight);
+
+	if (frame->rawheight != frame->height) {
+		err("invalid height");
+		return;
+	}
+
+	if ((frame->rawwidth * 2) != frame->width) {
+		err("invalid width");
+		return;
+	}
+
+	/* Y */
+	pInOdd = pIn0;
+	pInEven = pInOdd + fieldpix;
+	pOut = pOut0;
+	for (y = 0; y < fieldheight; y++) {
+		for (x = 0; x < frame->rawwidth; x++) {
+			*pOut = *pInEven;
+			*(pOut+1) = *pInEven++;
+			*(pOut+w) = *pInOdd;
+			*(pOut+w+1) = *pInOdd++;
+			pOut += 2;
+		}
+		pOut += w;
+	}
+
+	if (rawformat == RAWFMT_YUV420) {
+	/* U */
+		pInOdd = pIn0 + fieldpix * 2;
+		pInEven = pInOdd + fieldpix / 4;
+		for (y = 0; y < fieldheight / 2; y++) {
+			for (x = 0; x < frame->rawwidth / 2; x++) {
+				*pOut = *pInEven;
+				*(pOut+1) = *pInEven++;
+				*(pOut+w/2) = *pInOdd;
+				*(pOut+w/2+1) = *pInOdd++;
+				pOut += 2;
+			}
+			pOut += w/2;
+		}
+	/* V */
+		pInOdd = pIn0 + fieldpix * 2 + fieldpix / 2;
+		pInEven = pInOdd + fieldpix / 4;
+		for (y = 0; y < fieldheight / 2; y++) {
+			for (x = 0; x < frame->rawwidth / 2; x++) {
+				*pOut = *pInEven;
+				*(pOut+1) = *pInEven++;
+				*(pOut+w/2) = *pInOdd;
+				*(pOut+w/2+1) = *pInOdd++;
+				pOut += 2;
+			}
+			pOut += w/2;
+		}
+	}
+}
+
+static void
+ov51x_postprocess_grey(struct usb_ov511 *ov, struct ov511_frame *frame)
+{
+		/* Deinterlace frame, if necessary */
+		if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) {
+			if (frame->compressed)
+				decompress(ov, frame, frame->rawdata,
+						 frame->tempdata);
+			else
+				yuv400raw_to_yuv400p(frame, frame->rawdata,
+						     frame->tempdata);
+
+			deinterlace(frame, RAWFMT_YUV400, frame->tempdata,
+				    frame->data);
+		} else {
+			if (frame->compressed)
+				decompress(ov, frame, frame->rawdata,
+						 frame->data);
+			else
+				yuv400raw_to_yuv400p(frame, frame->rawdata,
+						     frame->data);
+		}
+}
+
+/* Process raw YUV420 data into standard YUV420P */
+static void
+ov51x_postprocess_yuv420(struct usb_ov511 *ov, struct ov511_frame *frame)
+{
+	/* Deinterlace frame, if necessary */
+	if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) {
+		if (frame->compressed)
+			decompress(ov, frame, frame->rawdata, frame->tempdata);
+		else
+			yuv420raw_to_yuv420p(frame, frame->rawdata,
+					     frame->tempdata);
+
+		deinterlace(frame, RAWFMT_YUV420, frame->tempdata,
+			    frame->data);
+	} else {
+		if (frame->compressed)
+			decompress(ov, frame, frame->rawdata, frame->data);
+		else
+			yuv420raw_to_yuv420p(frame, frame->rawdata,
+					     frame->data);
+	}
+}
+
+/* Post-processes the specified frame. This consists of:
+ * 	1. Decompress frame, if necessary
+ *	2. Deinterlace frame and scale to proper size, if necessary
+ * 	3. Convert from YUV planar to destination format, if necessary
+ * 	4. Fix the RGB offset, if necessary
+ */
+static void
+ov51x_postprocess(struct usb_ov511 *ov, struct ov511_frame *frame)
+{
+	if (dumppix) {
+		memset(frame->data, 0,
+			MAX_DATA_SIZE(ov->maxwidth, ov->maxheight));
+		PDEBUG(4, "Dumping %d bytes", frame->bytes_recvd);
+		memcpy(frame->data, frame->rawdata, frame->bytes_recvd);
+	} else {
+		switch (frame->format) {
+		case VIDEO_PALETTE_GREY:
+			ov51x_postprocess_grey(ov, frame);
+			break;
+		case VIDEO_PALETTE_YUV420:
+		case VIDEO_PALETTE_YUV420P:
+			ov51x_postprocess_yuv420(ov, frame);
+			break;
+		default:
+			err("Cannot convert data to %s",
+			    symbolic(v4l1_plist, frame->format));
+		}
+	}
+}
+
+/**********************************************************************
+ *
+ * OV51x data transfer, IRQ handler
+ *
+ **********************************************************************/
+
+static inline void
+ov511_move_data(struct usb_ov511 *ov, unsigned char *in, int n)
+{
+	int num, offset;
+	int pnum = in[ov->packet_size - 1];		/* Get packet number */
+	int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight);
+	struct ov511_frame *frame = &ov->frame[ov->curframe];
+	struct timeval *ts;
+
+	/* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th
+	 * byte non-zero. The EOF packet has image width/height in the
+	 * 10th and 11th bytes. The 9th byte is given as follows:
+	 *
+	 * bit 7: EOF
+	 *     6: compression enabled
+	 *     5: 422/420/400 modes
+	 *     4: 422/420/400 modes
+	 *     3: 1
+	 *     2: snapshot button on
+	 *     1: snapshot frame
+	 *     0: even/odd field
+	 */
+
+	if (printph) {
+		info("ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x",
+		     pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6],
+		     in[7], in[8], in[9], in[10], in[11]);
+	}
+
+	/* Check for SOF/EOF packet */
+	if ((in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) ||
+	    (~in[8] & 0x08))
+		goto check_middle;
+
+	/* Frame end */
+	if (in[8] & 0x80) {
+		ts = (struct timeval *)(frame->data
+		      + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight));
+		do_gettimeofday(ts);
+
+		/* Get the actual frame size from the EOF header */
+		frame->rawwidth = ((int)(in[9]) + 1) * 8;
+		frame->rawheight = ((int)(in[10]) + 1) * 8;
+
+		PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d",
+			ov->curframe, pnum, frame->rawwidth, frame->rawheight,
+			frame->bytes_recvd);
+
+		/* Validate the header data */
+		RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth);
+		RESTRICT_TO_RANGE(frame->rawheight, ov->minheight,
+				  ov->maxheight);
+
+		/* Don't allow byte count to exceed buffer size */
+		RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw);
+
+		if (frame->scanstate == STATE_LINES) {
+	    		int nextf;
+
+			frame->grabstate = FRAME_DONE;
+			wake_up_interruptible(&frame->wq);
+
+			/* If next frame is ready or grabbing,
+			 * point to it */
+			nextf = (ov->curframe + 1) % OV511_NUMFRAMES;
+			if (ov->frame[nextf].grabstate == FRAME_READY
+			    || ov->frame[nextf].grabstate == FRAME_GRABBING) {
+				ov->curframe = nextf;
+				ov->frame[nextf].scanstate = STATE_SCANNING;
+			} else {
+				if (frame->grabstate == FRAME_DONE) {
+					PDEBUG(4, "** Frame done **");
+				} else {
+					PDEBUG(4, "Frame not ready? state = %d",
+						ov->frame[nextf].grabstate);
+				}
+
+				ov->curframe = -1;
+			}
+		} else {
+			PDEBUG(5, "Frame done, but not scanning");
+		}
+		/* Image corruption caused by misplaced frame->segment = 0
+		 * fixed by carlosf@conectiva.com.br
+		 */
+	} else {
+		/* Frame start */
+		PDEBUG(4, "Frame start, framenum = %d", ov->curframe);
+
+		/* Check to see if it's a snapshot frame */
+		/* FIXME?? Should the snapshot reset go here? Performance? */
+		if (in[8] & 0x02) {
+			frame->snapshot = 1;
+			PDEBUG(3, "snapshot detected");
+		}
+
+		frame->scanstate = STATE_LINES;
+		frame->bytes_recvd = 0;
+		frame->compressed = in[8] & 0x40;
+	}
+
+check_middle:
+	/* Are we in a frame? */
+	if (frame->scanstate != STATE_LINES) {
+		PDEBUG(5, "Not in a frame; packet skipped");
+		return;
+	}
+
+	/* If frame start, skip header */
+	if (frame->bytes_recvd == 0)
+		offset = 9;
+	else
+		offset = 0;
+
+	num = n - offset - 1;
+
+	/* Dump all data exactly as received */
+	if (dumppix == 2) {
+		frame->bytes_recvd += n - 1;
+		if (frame->bytes_recvd <= max_raw)
+			memcpy(frame->rawdata + frame->bytes_recvd - (n - 1),
+				in, n - 1);
+		else
+			PDEBUG(3, "Raw data buffer overrun!! (%d)",
+				frame->bytes_recvd - max_raw);
+	} else if (!frame->compressed && !remove_zeros) {
+		frame->bytes_recvd += num;
+		if (frame->bytes_recvd <= max_raw)
+			memcpy(frame->rawdata + frame->bytes_recvd - num,
+				in + offset, num);
+		else
+			PDEBUG(3, "Raw data buffer overrun!! (%d)",
+				frame->bytes_recvd - max_raw);
+	} else { /* Remove all-zero FIFO lines (aligned 32-byte blocks) */
+		int b, read = 0, allzero, copied = 0;
+		if (offset) {
+			frame->bytes_recvd += 32 - offset;	// Bytes out
+			memcpy(frame->rawdata,	in + offset, 32 - offset);
+			read += 32;
+		}
+
+		while (read < n - 1) {
+			allzero = 1;
+			for (b = 0; b < 32; b++) {
+				if (in[read + b]) {
+					allzero = 0;
+					break;
+				}
+			}
+
+			if (allzero) {
+				/* Don't copy it */
+			} else {
+				if (frame->bytes_recvd + copied + 32 <= max_raw)
+				{
+					memcpy(frame->rawdata
+						+ frame->bytes_recvd + copied,
+						in + read, 32);
+					copied += 32;
+				} else {
+					PDEBUG(3, "Raw data buffer overrun!!");
+				}
+			}
+			read += 32;
+		}
+
+		frame->bytes_recvd += copied;
+	}
+}
+
+static inline void
+ov518_move_data(struct usb_ov511 *ov, unsigned char *in, int n)
+{
+	int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight);
+	struct ov511_frame *frame = &ov->frame[ov->curframe];
+	struct timeval *ts;
+
+	/* Don't copy the packet number byte */
+	if (ov->packet_numbering)
+		--n;
+
+	/* A false positive here is likely, until OVT gives me
+	 * the definitive SOF/EOF format */
+	if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) {
+		if (printph) {
+			info("ph: %2x %2x %2x %2x %2x %2x %2x %2x", in[0],
+			     in[1], in[2], in[3], in[4], in[5], in[6], in[7]);
+		}
+
+		if (frame->scanstate == STATE_LINES) {
+			PDEBUG(4, "Detected frame end/start");
+			goto eof;
+		} else { //scanstate == STATE_SCANNING
+			/* Frame start */
+			PDEBUG(4, "Frame start, framenum = %d", ov->curframe);
+			goto sof;
+		}
+	} else {
+		goto check_middle;
+	}
+
+eof:
+	ts = (struct timeval *)(frame->data
+	      + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight));
+	do_gettimeofday(ts);
+
+	PDEBUG(4, "Frame end, curframe = %d, hw=%d, vw=%d, recvd=%d",
+		ov->curframe,
+		(int)(in[9]), (int)(in[10]), frame->bytes_recvd);
+
+	// FIXME: Since we don't know the header formats yet,
+	// there is no way to know what the actual image size is
+	frame->rawwidth = frame->width;
+	frame->rawheight = frame->height;
+
+	/* Validate the header data */
+	RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth);
+	RESTRICT_TO_RANGE(frame->rawheight, ov->minheight, ov->maxheight);
+
+	/* Don't allow byte count to exceed buffer size */
+	RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw);
+
+	if (frame->scanstate == STATE_LINES) {
+    		int nextf;
+
+		frame->grabstate = FRAME_DONE;
+		wake_up_interruptible(&frame->wq);
+
+		/* If next frame is ready or grabbing,
+		 * point to it */
+		nextf = (ov->curframe + 1) % OV511_NUMFRAMES;
+		if (ov->frame[nextf].grabstate == FRAME_READY
+		    || ov->frame[nextf].grabstate == FRAME_GRABBING) {
+			ov->curframe = nextf;
+			ov->frame[nextf].scanstate = STATE_SCANNING;
+			frame = &ov->frame[nextf];
+		} else {
+			if (frame->grabstate == FRAME_DONE) {
+				PDEBUG(4, "** Frame done **");
+			} else {
+				PDEBUG(4, "Frame not ready? state = %d",
+				       ov->frame[nextf].grabstate);
+			}
+
+			ov->curframe = -1;
+			PDEBUG(4, "SOF dropped (no active frame)");
+			return;  /* Nowhere to store this frame */
+		}
+	}
+sof:
+	PDEBUG(4, "Starting capture on frame %d", frame->framenum);
+
+// Snapshot not reverse-engineered yet.
+#if 0
+	/* Check to see if it's a snapshot frame */
+	/* FIXME?? Should the snapshot reset go here? Performance? */
+	if (in[8] & 0x02) {
+		frame->snapshot = 1;
+		PDEBUG(3, "snapshot detected");
+	}
+#endif
+	frame->scanstate = STATE_LINES;
+	frame->bytes_recvd = 0;
+	frame->compressed = 1;
+
+check_middle:
+	/* Are we in a frame? */
+	if (frame->scanstate != STATE_LINES) {
+		PDEBUG(4, "scanstate: no SOF yet");
+		return;
+	}
+
+	/* Dump all data exactly as received */
+	if (dumppix == 2) {
+		frame->bytes_recvd += n;
+		if (frame->bytes_recvd <= max_raw)
+			memcpy(frame->rawdata + frame->bytes_recvd - n, in, n);
+		else
+			PDEBUG(3, "Raw data buffer overrun!! (%d)",
+				frame->bytes_recvd - max_raw);
+	} else {
+		/* All incoming data are divided into 8-byte segments. If the
+		 * segment contains all zero bytes, it must be skipped. These
+		 * zero-segments allow the OV518 to mainain a constant data rate
+		 * regardless of the effectiveness of the compression. Segments
+		 * are aligned relative to the beginning of each isochronous
+		 * packet. The first segment in each image is a header (the
+		 * decompressor skips it later).
+		 */
+
+		int b, read = 0, allzero, copied = 0;
+
+		while (read < n) {
+			allzero = 1;
+			for (b = 0; b < 8; b++) {
+				if (in[read + b]) {
+					allzero = 0;
+					break;
+				}
+			}
+
+			if (allzero) {
+			/* Don't copy it */
+			} else {
+				if (frame->bytes_recvd + copied + 8 <= max_raw)
+				{
+					memcpy(frame->rawdata
+						+ frame->bytes_recvd + copied,
+						in + read, 8);
+					copied += 8;
+				} else {
+					PDEBUG(3, "Raw data buffer overrun!!");
+				}
+			}
+			read += 8;
+		}
+		frame->bytes_recvd += copied;
+	}
+}
+
+static void
+ov51x_isoc_irq(struct urb *urb, struct pt_regs *regs)
+{
+	int i;
+	struct usb_ov511 *ov;
+	struct ov511_sbuf *sbuf;
+
+	if (!urb->context) {
+		PDEBUG(4, "no context");
+		return;
+	}
+
+	sbuf = urb->context;
+	ov = sbuf->ov;
+
+	if (!ov || !ov->dev || !ov->user) {
+		PDEBUG(4, "no device, or not open");
+		return;
+	}
+
+	if (!ov->streaming) {
+		PDEBUG(4, "hmmm... not streaming, but got interrupt");
+		return;
+	}
+
+	if (urb->status == -ENOENT || urb->status == -ECONNRESET) {
+		PDEBUG(4, "URB unlinked");
+		return;
+	}
+
+	if (urb->status != -EINPROGRESS && urb->status != 0) {
+		err("ERROR: urb->status=%d: %s", urb->status,
+		    symbolic(urb_errlist, urb->status));
+	}
+
+	/* Copy the data received into our frame buffer */
+	PDEBUG(5, "sbuf[%d]: Moving %d packets", sbuf->n,
+	       urb->number_of_packets);
+	for (i = 0; i < urb->number_of_packets; i++) {
+		/* Warning: Don't call *_move_data() if no frame active! */
+		if (ov->curframe >= 0) {
+			int n = urb->iso_frame_desc[i].actual_length;
+			int st = urb->iso_frame_desc[i].status;
+			unsigned char *cdata;
+
+			urb->iso_frame_desc[i].actual_length = 0;
+			urb->iso_frame_desc[i].status = 0;
+
+			cdata = urb->transfer_buffer
+				+ urb->iso_frame_desc[i].offset;
+
+			if (!n) {
+				PDEBUG(4, "Zero-length packet");
+				continue;
+			}
+
+			if (st)
+				PDEBUG(2, "data error: [%d] len=%d, status=%d",
+				       i, n, st);
+
+			if (ov->bclass == BCL_OV511)
+				ov511_move_data(ov, cdata, n);
+			else if (ov->bclass == BCL_OV518)
+				ov518_move_data(ov, cdata, n);
+			else
+				err("Unknown bridge device (%d)", ov->bridge);
+
+		} else if (waitqueue_active(&ov->wq)) {
+			wake_up_interruptible(&ov->wq);
+		}
+	}
+
+	/* Resubmit this URB */
+	urb->dev = ov->dev;
+	if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
+		err("usb_submit_urb() ret %d", i);
+
+	return;
+}
+
+/****************************************************************************
+ *
+ * Stream initialization and termination
+ *
+ ***************************************************************************/
+
+static int
+ov51x_init_isoc(struct usb_ov511 *ov)
+{
+	struct urb *urb;
+	int fx, err, n, size;
+
+	PDEBUG(3, "*** Initializing capture ***");
+
+	ov->curframe = -1;
+
+	if (ov->bridge == BRG_OV511) {
+		if (cams == 1)
+			size = 993;
+		else if (cams == 2)
+			size = 513;
+		else if (cams == 3 || cams == 4)
+			size = 257;
+		else {
+			err("\"cams\" parameter too high!");
+			return -1;
+		}
+	} else if (ov->bridge == BRG_OV511PLUS) {
+		if (cams == 1)
+			size = 961;
+		else if (cams == 2)
+			size = 513;
+		else if (cams == 3 || cams == 4)
+			size = 257;
+		else if (cams >= 5 && cams <= 8)
+			size = 129;
+		else if (cams >= 9 && cams <= 31)
+			size = 33;
+		else {
+			err("\"cams\" parameter too high!");
+			return -1;
+		}
+	} else if (ov->bclass == BCL_OV518) {
+		if (cams == 1)
+			size = 896;
+		else if (cams == 2)
+			size = 512;
+		else if (cams == 3 || cams == 4)
+			size = 256;
+		else if (cams >= 5 && cams <= 8)
+			size = 128;
+		else {
+			err("\"cams\" parameter too high!");
+			return -1;
+		}
+	} else {
+		err("invalid bridge type");
+		return -1;
+	}
+
+	// FIXME: OV518 is hardcoded to 15 FPS (alternate 5) for now
+	if (ov->bclass == BCL_OV518) {
+		if (packetsize == -1) {
+			ov518_set_packet_size(ov, 640);
+		} else {
+			info("Forcing packet size to %d", packetsize);
+			ov518_set_packet_size(ov, packetsize);
+		}
+	} else {
+		if (packetsize == -1) {
+			ov511_set_packet_size(ov, size);
+		} else {
+			info("Forcing packet size to %d", packetsize);
+			ov511_set_packet_size(ov, packetsize);
+		}
+	}
+
+	for (n = 0; n < OV511_NUMSBUF; n++) {
+		urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
+		if (!urb) {
+			err("init isoc: usb_alloc_urb ret. NULL");
+			return -ENOMEM;
+		}
+		ov->sbuf[n].urb = urb;
+		urb->dev = ov->dev;
+		urb->context = &ov->sbuf[n];
+		urb->pipe = usb_rcvisocpipe(ov->dev, OV511_ENDPOINT_ADDRESS);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->transfer_buffer = ov->sbuf[n].data;
+		urb->complete = ov51x_isoc_irq;
+		urb->number_of_packets = FRAMES_PER_DESC;
+		urb->transfer_buffer_length = ov->packet_size * FRAMES_PER_DESC;
+		urb->interval = 1;
+		for (fx = 0; fx < FRAMES_PER_DESC; fx++) {
+			urb->iso_frame_desc[fx].offset = ov->packet_size * fx;
+			urb->iso_frame_desc[fx].length = ov->packet_size;
+		}
+	}
+
+	ov->streaming = 1;
+
+	for (n = 0; n < OV511_NUMSBUF; n++) {
+		ov->sbuf[n].urb->dev = ov->dev;
+		err = usb_submit_urb(ov->sbuf[n].urb, GFP_KERNEL);
+		if (err) {
+			err("init isoc: usb_submit_urb(%d) ret %d", n, err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static void
+ov51x_unlink_isoc(struct usb_ov511 *ov)
+{
+	int n;
+
+	/* Unschedule all of the iso td's */
+	for (n = OV511_NUMSBUF - 1; n >= 0; n--) {
+		if (ov->sbuf[n].urb) {
+			usb_kill_urb(ov->sbuf[n].urb);
+			usb_free_urb(ov->sbuf[n].urb);
+			ov->sbuf[n].urb = NULL;
+		}
+	}
+}
+
+static void
+ov51x_stop_isoc(struct usb_ov511 *ov)
+{
+	if (!ov->streaming || !ov->dev)
+		return;
+
+	PDEBUG(3, "*** Stopping capture ***");
+
+	if (ov->bclass == BCL_OV518)
+		ov518_set_packet_size(ov, 0);
+	else
+		ov511_set_packet_size(ov, 0);
+
+	ov->streaming = 0;
+
+	ov51x_unlink_isoc(ov);
+}
+
+static int
+ov51x_new_frame(struct usb_ov511 *ov, int framenum)
+{
+	struct ov511_frame *frame;
+	int newnum;
+
+	PDEBUG(4, "ov->curframe = %d, framenum = %d", ov->curframe, framenum);
+
+	if (!ov->dev)
+		return -1;
+
+	/* If we're not grabbing a frame right now and the other frame is */
+	/* ready to be grabbed into, then use it instead */
+	if (ov->curframe == -1) {
+		newnum = (framenum - 1 + OV511_NUMFRAMES) % OV511_NUMFRAMES;
+		if (ov->frame[newnum].grabstate == FRAME_READY)
+			framenum = newnum;
+	} else
+		return 0;
+
+	frame = &ov->frame[framenum];
+
+	PDEBUG(4, "framenum = %d, width = %d, height = %d", framenum,
+	       frame->width, frame->height);
+
+	frame->grabstate = FRAME_GRABBING;
+	frame->scanstate = STATE_SCANNING;
+	frame->snapshot = 0;
+
+	ov->curframe = framenum;
+
+	/* Make sure it's not too big */
+	if (frame->width > ov->maxwidth)
+		frame->width = ov->maxwidth;
+
+	frame->width &= ~7L;		/* Multiple of 8 */
+
+	if (frame->height > ov->maxheight)
+		frame->height = ov->maxheight;
+
+	frame->height &= ~3L;		/* Multiple of 4 */
+
+	return 0;
+}
+
+/****************************************************************************
+ *
+ * Buffer management
+ *
+ ***************************************************************************/
+
+/*
+ * - You must acquire buf_lock before entering this function.
+ * - Because this code will free any non-null pointer, you must be sure to null
+ *   them if you explicitly free them somewhere else!
+ */
+static void
+ov51x_do_dealloc(struct usb_ov511 *ov)
+{
+	int i;
+	PDEBUG(4, "entered");
+
+	if (ov->fbuf) {
+		rvfree(ov->fbuf, OV511_NUMFRAMES
+		       * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight));
+		ov->fbuf = NULL;
+	}
+
+	vfree(ov->rawfbuf);
+	ov->rawfbuf = NULL;
+
+	vfree(ov->tempfbuf);
+	ov->tempfbuf = NULL;
+
+	for (i = 0; i < OV511_NUMSBUF; i++) {
+		kfree(ov->sbuf[i].data);
+		ov->sbuf[i].data = NULL;
+	}
+
+	for (i = 0; i < OV511_NUMFRAMES; i++) {
+		ov->frame[i].data = NULL;
+		ov->frame[i].rawdata = NULL;
+		ov->frame[i].tempdata = NULL;
+		if (ov->frame[i].compbuf) {
+			free_page((unsigned long) ov->frame[i].compbuf);
+			ov->frame[i].compbuf = NULL;
+		}
+	}
+
+	PDEBUG(4, "buffer memory deallocated");
+	ov->buf_state = BUF_NOT_ALLOCATED;
+	PDEBUG(4, "leaving");
+}
+
+static int
+ov51x_alloc(struct usb_ov511 *ov)
+{
+	int i;
+	const int w = ov->maxwidth;
+	const int h = ov->maxheight;
+	const int data_bufsize = OV511_NUMFRAMES * MAX_DATA_SIZE(w, h);
+	const int raw_bufsize = OV511_NUMFRAMES * MAX_RAW_DATA_SIZE(w, h);
+
+	PDEBUG(4, "entered");
+	mutex_lock(&ov->buf_lock);
+
+	if (ov->buf_state == BUF_ALLOCATED)
+		goto out;
+
+	ov->fbuf = rvmalloc(data_bufsize);
+	if (!ov->fbuf)
+		goto error;
+
+	ov->rawfbuf = vmalloc(raw_bufsize);
+	if (!ov->rawfbuf)
+		goto error;
+
+	memset(ov->rawfbuf, 0, raw_bufsize);
+
+	ov->tempfbuf = vmalloc(raw_bufsize);
+	if (!ov->tempfbuf)
+		goto error;
+
+	memset(ov->tempfbuf, 0, raw_bufsize);
+
+	for (i = 0; i < OV511_NUMSBUF; i++) {
+		ov->sbuf[i].data = kmalloc(FRAMES_PER_DESC *
+			MAX_FRAME_SIZE_PER_DESC, GFP_KERNEL);
+		if (!ov->sbuf[i].data)
+			goto error;
+
+		PDEBUG(4, "sbuf[%d] @ %p", i, ov->sbuf[i].data);
+	}
+
+	for (i = 0; i < OV511_NUMFRAMES; i++) {
+		ov->frame[i].data = ov->fbuf + i * MAX_DATA_SIZE(w, h);
+		ov->frame[i].rawdata = ov->rawfbuf
+		 + i * MAX_RAW_DATA_SIZE(w, h);
+		ov->frame[i].tempdata = ov->tempfbuf
+		 + i * MAX_RAW_DATA_SIZE(w, h);
+
+		ov->frame[i].compbuf =
+		 (unsigned char *) __get_free_page(GFP_KERNEL);
+		if (!ov->frame[i].compbuf)
+			goto error;
+
+		PDEBUG(4, "frame[%d] @ %p", i, ov->frame[i].data);
+	}
+
+	ov->buf_state = BUF_ALLOCATED;
+out:
+	mutex_unlock(&ov->buf_lock);
+	PDEBUG(4, "leaving");
+	return 0;
+error:
+	ov51x_do_dealloc(ov);
+	mutex_unlock(&ov->buf_lock);
+	PDEBUG(4, "errored");
+	return -ENOMEM;
+}
+
+static void
+ov51x_dealloc(struct usb_ov511 *ov)
+{
+	PDEBUG(4, "entered");
+	mutex_lock(&ov->buf_lock);
+	ov51x_do_dealloc(ov);
+	mutex_unlock(&ov->buf_lock);
+	PDEBUG(4, "leaving");
+}
+
+/****************************************************************************
+ *
+ * V4L 1 API
+ *
+ ***************************************************************************/
+
+static int
+ov51x_v4l1_open(struct inode *inode, struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct usb_ov511 *ov = video_get_drvdata(vdev);
+	int err, i;
+
+	PDEBUG(4, "opening");
+
+	mutex_lock(&ov->lock);
+
+	err = -EBUSY;
+	if (ov->user)
+		goto out;
+
+	ov->sub_flag = 0;
+
+	/* In case app doesn't set them... */
+	err = ov51x_set_default_params(ov);
+	if (err < 0)
+		goto out;
+
+	/* Make sure frames are reset */
+	for (i = 0; i < OV511_NUMFRAMES; i++) {
+		ov->frame[i].grabstate = FRAME_UNUSED;
+		ov->frame[i].bytes_read = 0;
+	}
+
+	/* If compression is on, make sure now that a
+	 * decompressor can be loaded */
+	if (ov->compress && !ov->decomp_ops) {
+		err = request_decompressor(ov);
+		if (err && !dumppix)
+			goto out;
+	}
+
+	err = ov51x_alloc(ov);
+	if (err < 0)
+		goto out;
+
+	err = ov51x_init_isoc(ov);
+	if (err) {
+		ov51x_dealloc(ov);
+		goto out;
+	}
+
+	ov->user++;
+	file->private_data = vdev;
+
+	if (ov->led_policy == LED_AUTO)
+		ov51x_led_control(ov, 1);
+
+out:
+	mutex_unlock(&ov->lock);
+	return err;
+}
+
+static int
+ov51x_v4l1_close(struct inode *inode, struct file *file)
+{
+	struct video_device *vdev = file->private_data;
+	struct usb_ov511 *ov = video_get_drvdata(vdev);
+
+	PDEBUG(4, "ov511_close");
+
+	mutex_lock(&ov->lock);
+
+	ov->user--;
+	ov51x_stop_isoc(ov);
+
+	if (ov->led_policy == LED_AUTO)
+		ov51x_led_control(ov, 0);
+
+	if (ov->dev)
+		ov51x_dealloc(ov);
+
+	mutex_unlock(&ov->lock);
+
+	/* Device unplugged while open. Only a minimum of unregistration is done
+	 * here; the disconnect callback already did the rest. */
+	if (!ov->dev) {
+		mutex_lock(&ov->cbuf_lock);
+		kfree(ov->cbuf);
+		ov->cbuf = NULL;
+		mutex_unlock(&ov->cbuf_lock);
+
+		ov51x_dealloc(ov);
+		kfree(ov);
+		ov = NULL;
+	}
+
+	file->private_data = NULL;
+	return 0;
+}
+
+/* Do not call this function directly! */
+static int
+ov51x_v4l1_ioctl_internal(struct inode *inode, struct file *file,
+			  unsigned int cmd, void *arg)
+{
+	struct video_device *vdev = file->private_data;
+	struct usb_ov511 *ov = video_get_drvdata(vdev);
+	PDEBUG(5, "IOCtl: 0x%X", cmd);
+
+	if (!ov->dev)
+		return -EIO;
+
+	switch (cmd) {
+	case VIDIOCGCAP:
+	{
+		struct video_capability *b = arg;
+
+		PDEBUG(4, "VIDIOCGCAP");
+
+		memset(b, 0, sizeof(struct video_capability));
+		sprintf(b->name, "%s USB Camera",
+			symbolic(brglist, ov->bridge));
+		b->type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE;
+		b->channels = ov->num_inputs;
+		b->audios = 0;
+		b->maxwidth = ov->maxwidth;
+		b->maxheight = ov->maxheight;
+		b->minwidth = ov->minwidth;
+		b->minheight = ov->minheight;
+
+		return 0;
+	}
+	case VIDIOCGCHAN:
+	{
+		struct video_channel *v = arg;
+
+		PDEBUG(4, "VIDIOCGCHAN");
+
+		if ((unsigned)(v->channel) >= ov->num_inputs) {
+			err("Invalid channel (%d)", v->channel);
+			return -EINVAL;
+		}
+
+		v->norm = ov->norm;
+		v->type = VIDEO_TYPE_CAMERA;
+		v->flags = 0;
+//		v->flags |= (ov->has_decoder) ? VIDEO_VC_NORM : 0;
+		v->tuners = 0;
+		decoder_get_input_name(ov, v->channel, v->name);
+
+		return 0;
+	}
+	case VIDIOCSCHAN:
+	{
+		struct video_channel *v = arg;
+		int err;
+
+		PDEBUG(4, "VIDIOCSCHAN");
+
+		/* Make sure it's not a camera */
+		if (!ov->has_decoder) {
+			if (v->channel == 0)
+				return 0;
+			else
+				return -EINVAL;
+		}
+
+		if (v->norm != VIDEO_MODE_PAL &&
+		    v->norm != VIDEO_MODE_NTSC &&
+		    v->norm != VIDEO_MODE_SECAM &&
+		    v->norm != VIDEO_MODE_AUTO) {
+			err("Invalid norm (%d)", v->norm);
+			return -EINVAL;
+		}
+
+		if ((unsigned)(v->channel) >= ov->num_inputs) {
+			err("Invalid channel (%d)", v->channel);
+			return -EINVAL;
+		}
+
+		err = decoder_set_input(ov, v->channel);
+		if (err)
+			return err;
+
+		err = decoder_set_norm(ov, v->norm);
+		if (err)
+			return err;
+
+		return 0;
+	}
+	case VIDIOCGPICT:
+	{
+		struct video_picture *p = arg;
+
+		PDEBUG(4, "VIDIOCGPICT");
+
+		memset(p, 0, sizeof(struct video_picture));
+		if (sensor_get_picture(ov, p))
+			return -EIO;
+
+		/* Can we get these from frame[0]? -claudio? */
+		p->depth = ov->frame[0].depth;
+		p->palette = ov->frame[0].format;
+
+		return 0;
+	}
+	case VIDIOCSPICT:
+	{
+		struct video_picture *p = arg;
+		int i, rc;
+
+		PDEBUG(4, "VIDIOCSPICT");
+
+		if (!get_depth(p->palette))
+			return -EINVAL;
+
+		if (sensor_set_picture(ov, p))
+			return -EIO;
+
+		if (force_palette && p->palette != force_palette) {
+			info("Palette rejected (%s)",
+			     symbolic(v4l1_plist, p->palette));
+			return -EINVAL;
+		}
+
+		// FIXME: Format should be independent of frames
+		if (p->palette != ov->frame[0].format) {
+			PDEBUG(4, "Detected format change");
+
+			rc = ov51x_wait_frames_inactive(ov);
+			if (rc)
+				return rc;
+
+			mode_init_regs(ov, ov->frame[0].width,
+				ov->frame[0].height, p->palette, ov->sub_flag);
+		}
+
+		PDEBUG(4, "Setting depth=%d, palette=%s",
+		       p->depth, symbolic(v4l1_plist, p->palette));
+
+		for (i = 0; i < OV511_NUMFRAMES; i++) {
+			ov->frame[i].depth = p->depth;
+			ov->frame[i].format = p->palette;
+		}
+
+		return 0;
+	}
+	case VIDIOCGCAPTURE:
+	{
+		int *vf = arg;
+
+		PDEBUG(4, "VIDIOCGCAPTURE");
+
+		ov->sub_flag = *vf;
+		return 0;
+	}
+	case VIDIOCSCAPTURE:
+	{
+		struct video_capture *vc = arg;
+
+		PDEBUG(4, "VIDIOCSCAPTURE");
+
+		if (vc->flags)
+			return -EINVAL;
+		if (vc->decimation)
+			return -EINVAL;
+
+		vc->x &= ~3L;
+		vc->y &= ~1L;
+		vc->y &= ~31L;
+
+		if (vc->width == 0)
+			vc->width = 32;
+
+		vc->height /= 16;
+		vc->height *= 16;
+		if (vc->height == 0)
+			vc->height = 16;
+
+		ov->subx = vc->x;
+		ov->suby = vc->y;
+		ov->subw = vc->width;
+		ov->subh = vc->height;
+
+		return 0;
+	}
+	case VIDIOCSWIN:
+	{
+		struct video_window *vw = arg;
+		int i, rc;
+
+		PDEBUG(4, "VIDIOCSWIN: %dx%d", vw->width, vw->height);
+
+#if 0
+		if (vw->flags)
+			return -EINVAL;
+		if (vw->clipcount)
+			return -EINVAL;
+		if (vw->height != ov->maxheight)
+			return -EINVAL;
+		if (vw->width != ov->maxwidth)
+			return -EINVAL;
+#endif
+
+		rc = ov51x_wait_frames_inactive(ov);
+		if (rc)
+			return rc;
+
+		rc = mode_init_regs(ov, vw->width, vw->height,
+			ov->frame[0].format, ov->sub_flag);
+		if (rc < 0)
+			return rc;
+
+		for (i = 0; i < OV511_NUMFRAMES; i++) {
+			ov->frame[i].width = vw->width;
+			ov->frame[i].height = vw->height;
+		}
+
+		return 0;
+	}
+	case VIDIOCGWIN:
+	{
+		struct video_window *vw = arg;
+
+		memset(vw, 0, sizeof(struct video_window));
+		vw->x = 0;		/* FIXME */
+		vw->y = 0;
+		vw->width = ov->frame[0].width;
+		vw->height = ov->frame[0].height;
+		vw->flags = 30;
+
+		PDEBUG(4, "VIDIOCGWIN: %dx%d", vw->width, vw->height);
+
+		return 0;
+	}
+	case VIDIOCGMBUF:
+	{
+		struct video_mbuf *vm = arg;
+		int i;
+
+		PDEBUG(4, "VIDIOCGMBUF");
+
+		memset(vm, 0, sizeof(struct video_mbuf));
+		vm->size = OV511_NUMFRAMES
+			   * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight);
+		vm->frames = OV511_NUMFRAMES;
+
+		vm->offsets[0] = 0;
+		for (i = 1; i < OV511_NUMFRAMES; i++) {
+			vm->offsets[i] = vm->offsets[i-1]
+			   + MAX_DATA_SIZE(ov->maxwidth, ov->maxheight);
+		}
+
+		return 0;
+	}
+	case VIDIOCMCAPTURE:
+	{
+		struct video_mmap *vm = arg;
+		int rc, depth;
+		unsigned int f = vm->frame;
+
+		PDEBUG(4, "VIDIOCMCAPTURE: frame: %d, %dx%d, %s", f, vm->width,
+			vm->height, symbolic(v4l1_plist, vm->format));
+
+		depth = get_depth(vm->format);
+		if (!depth) {
+			PDEBUG(2, "VIDIOCMCAPTURE: invalid format (%s)",
+			       symbolic(v4l1_plist, vm->format));
+			return -EINVAL;
+		}
+
+		if (f >= OV511_NUMFRAMES) {
+			err("VIDIOCMCAPTURE: invalid frame (%d)", f);
+			return -EINVAL;
+		}
+
+		if (vm->width > ov->maxwidth
+		    || vm->height > ov->maxheight) {
+			err("VIDIOCMCAPTURE: requested dimensions too big");
+			return -EINVAL;
+		}
+
+		if (ov->frame[f].grabstate == FRAME_GRABBING) {
+			PDEBUG(4, "VIDIOCMCAPTURE: already grabbing");
+			return -EBUSY;
+		}
+
+		if (force_palette && (vm->format != force_palette)) {
+			PDEBUG(2, "palette rejected (%s)",
+			       symbolic(v4l1_plist, vm->format));
+			return -EINVAL;
+		}
+
+		if ((ov->frame[f].width != vm->width) ||
+		    (ov->frame[f].height != vm->height) ||
+		    (ov->frame[f].format != vm->format) ||
+		    (ov->frame[f].sub_flag != ov->sub_flag) ||
+		    (ov->frame[f].depth != depth)) {
+			PDEBUG(4, "VIDIOCMCAPTURE: change in image parameters");
+
+			rc = ov51x_wait_frames_inactive(ov);
+			if (rc)
+				return rc;
+
+			rc = mode_init_regs(ov, vm->width, vm->height,
+				vm->format, ov->sub_flag);
+#if 0
+			if (rc < 0) {
+				PDEBUG(1, "Got error while initializing regs ");
+				return ret;
+			}
+#endif
+			ov->frame[f].width = vm->width;
+			ov->frame[f].height = vm->height;
+			ov->frame[f].format = vm->format;
+			ov->frame[f].sub_flag = ov->sub_flag;
+			ov->frame[f].depth = depth;
+		}
+
+		/* Mark it as ready */
+		ov->frame[f].grabstate = FRAME_READY;
+
+		PDEBUG(4, "VIDIOCMCAPTURE: renewing frame %d", f);
+
+		return ov51x_new_frame(ov, f);
+	}
+	case VIDIOCSYNC:
+	{
+		unsigned int fnum = *((unsigned int *) arg);
+		struct ov511_frame *frame;
+		int rc;
+
+		if (fnum >= OV511_NUMFRAMES) {
+			err("VIDIOCSYNC: invalid frame (%d)", fnum);
+			return -EINVAL;
+		}
+
+		frame = &ov->frame[fnum];
+
+		PDEBUG(4, "syncing to frame %d, grabstate = %d", fnum,
+		       frame->grabstate);
+
+		switch (frame->grabstate) {
+		case FRAME_UNUSED:
+			return -EINVAL;
+		case FRAME_READY:
+		case FRAME_GRABBING:
+		case FRAME_ERROR:
+redo:
+			if (!ov->dev)
+				return -EIO;
+
+			rc = wait_event_interruptible(frame->wq,
+			    (frame->grabstate == FRAME_DONE)
+			    || (frame->grabstate == FRAME_ERROR));
+
+			if (rc)
+				return rc;
+
+			if (frame->grabstate == FRAME_ERROR) {
+				if ((rc = ov51x_new_frame(ov, fnum)) < 0)
+					return rc;
+				goto redo;
+			}
+			/* Fall through */
+		case FRAME_DONE:
+			if (ov->snap_enabled && !frame->snapshot) {
+				if ((rc = ov51x_new_frame(ov, fnum)) < 0)
+					return rc;
+				goto redo;
+			}
+
+			frame->grabstate = FRAME_UNUSED;
+
+			/* Reset the hardware snapshot button */
+			/* FIXME - Is this the best place for this? */
+			if ((ov->snap_enabled) && (frame->snapshot)) {
+				frame->snapshot = 0;
+				ov51x_clear_snapshot(ov);
+			}
+
+			/* Decompression, format conversion, etc... */
+			ov51x_postprocess(ov, frame);
+
+			break;
+		} /* end switch */
+
+		return 0;
+	}
+	case VIDIOCGFBUF:
+	{
+		struct video_buffer *vb = arg;
+
+		PDEBUG(4, "VIDIOCGFBUF");
+
+		memset(vb, 0, sizeof(struct video_buffer));
+
+		return 0;
+	}
+	case VIDIOCGUNIT:
+	{
+		struct video_unit *vu = arg;
+
+		PDEBUG(4, "VIDIOCGUNIT");
+
+		memset(vu, 0, sizeof(struct video_unit));
+
+		vu->video = ov->vdev->minor;
+		vu->vbi = VIDEO_NO_UNIT;
+		vu->radio = VIDEO_NO_UNIT;
+		vu->audio = VIDEO_NO_UNIT;
+		vu->teletext = VIDEO_NO_UNIT;
+
+		return 0;
+	}
+	case OV511IOC_WI2C:
+	{
+		struct ov511_i2c_struct *w = arg;
+
+		return i2c_w_slave(ov, w->slave, w->reg, w->value, w->mask);
+	}
+	case OV511IOC_RI2C:
+	{
+		struct ov511_i2c_struct *r = arg;
+		int rc;
+
+		rc = i2c_r_slave(ov, r->slave, r->reg);
+		if (rc < 0)
+			return rc;
+
+		r->value = rc;
+		return 0;
+	}
+	default:
+		PDEBUG(3, "Unsupported IOCtl: 0x%X", cmd);
+		return -ENOIOCTLCMD;
+	} /* end switch */
+
+	return 0;
+}
+
+static int
+ov51x_v4l1_ioctl(struct inode *inode, struct file *file,
+		 unsigned int cmd, unsigned long arg)
+{
+	struct video_device *vdev = file->private_data;
+	struct usb_ov511 *ov = video_get_drvdata(vdev);
+	int rc;
+
+	if (mutex_lock_interruptible(&ov->lock))
+		return -EINTR;
+
+	rc = video_usercopy(inode, file, cmd, arg, ov51x_v4l1_ioctl_internal);
+
+	mutex_unlock(&ov->lock);
+	return rc;
+}
+
+static ssize_t
+ov51x_v4l1_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos)
+{
+	struct video_device *vdev = file->private_data;
+	int noblock = file->f_flags&O_NONBLOCK;
+	unsigned long count = cnt;
+	struct usb_ov511 *ov = video_get_drvdata(vdev);
+	int i, rc = 0, frmx = -1;
+	struct ov511_frame *frame;
+
+	if (mutex_lock_interruptible(&ov->lock))
+		return -EINTR;
+
+	PDEBUG(4, "%ld bytes, noblock=%d", count, noblock);
+
+	if (!vdev || !buf) {
+		rc = -EFAULT;
+		goto error;
+	}
+
+	if (!ov->dev) {
+		rc = -EIO;
+		goto error;
+	}
+
+// FIXME: Only supports two frames
+	/* See if a frame is completed, then use it. */
+	if (ov->frame[0].grabstate >= FRAME_DONE)	/* _DONE or _ERROR */
+		frmx = 0;
+	else if (ov->frame[1].grabstate >= FRAME_DONE)/* _DONE or _ERROR */
+		frmx = 1;
+
+	/* If nonblocking we return immediately */
+	if (noblock && (frmx == -1)) {
+		rc = -EAGAIN;
+		goto error;
+	}
+
+	/* If no FRAME_DONE, look for a FRAME_GRABBING state. */
+	/* See if a frame is in process (grabbing), then use it. */
+	if (frmx == -1) {
+		if (ov->frame[0].grabstate == FRAME_GRABBING)
+			frmx = 0;
+		else if (ov->frame[1].grabstate == FRAME_GRABBING)
+			frmx = 1;
+	}
+
+	/* If no frame is active, start one. */
+	if (frmx == -1) {
+		if ((rc = ov51x_new_frame(ov, frmx = 0))) {
+			err("read: ov51x_new_frame error");
+			goto error;
+		}
+	}
+
+	frame = &ov->frame[frmx];
+
+restart:
+	if (!ov->dev) {
+		rc = -EIO;
+		goto error;
+	}
+
+	/* Wait while we're grabbing the image */
+	PDEBUG(4, "Waiting image grabbing");
+	rc = wait_event_interruptible(frame->wq,
+		(frame->grabstate == FRAME_DONE)
+		|| (frame->grabstate == FRAME_ERROR));
+
+	if (rc)
+		goto error;
+
+	PDEBUG(4, "Got image, frame->grabstate = %d", frame->grabstate);
+	PDEBUG(4, "bytes_recvd = %d", frame->bytes_recvd);
+
+	if (frame->grabstate == FRAME_ERROR) {
+		frame->bytes_read = 0;
+		err("** ick! ** Errored frame %d", ov->curframe);
+		if (ov51x_new_frame(ov, frmx)) {
+			err("read: ov51x_new_frame error");
+			goto error;
+		}
+		goto restart;
+	}
+
+
+	/* Repeat until we get a snapshot frame */
+	if (ov->snap_enabled)
+		PDEBUG(4, "Waiting snapshot frame");
+	if (ov->snap_enabled && !frame->snapshot) {
+		frame->bytes_read = 0;
+		if ((rc = ov51x_new_frame(ov, frmx))) {
+			err("read: ov51x_new_frame error");
+			goto error;
+		}
+		goto restart;
+	}
+
+	/* Clear the snapshot */
+	if (ov->snap_enabled && frame->snapshot) {
+		frame->snapshot = 0;
+		ov51x_clear_snapshot(ov);
+	}
+
+	/* Decompression, format conversion, etc... */
+	ov51x_postprocess(ov, frame);
+
+	PDEBUG(4, "frmx=%d, bytes_read=%ld, length=%ld", frmx,
+		frame->bytes_read,
+		get_frame_length(frame));
+
+	/* copy bytes to user space; we allow for partials reads */
+//	if ((count + frame->bytes_read)
+//	    > get_frame_length((struct ov511_frame *)frame))
+//		count = frame->scanlength - frame->bytes_read;
+
+	/* FIXME - count hardwired to be one frame... */
+	count = get_frame_length(frame);
+
+	PDEBUG(4, "Copy to user space: %ld bytes", count);
+	if ((i = copy_to_user(buf, frame->data + frame->bytes_read, count))) {
+		PDEBUG(4, "Copy failed! %d bytes not copied", i);
+		rc = -EFAULT;
+		goto error;
+	}
+
+	frame->bytes_read += count;
+	PDEBUG(4, "{copy} count used=%ld, new bytes_read=%ld",
+		count, frame->bytes_read);
+
+	/* If all data have been read... */
+	if (frame->bytes_read
+	    >= get_frame_length(frame)) {
+		frame->bytes_read = 0;
+
+// FIXME: Only supports two frames
+		/* Mark it as available to be used again. */
+		ov->frame[frmx].grabstate = FRAME_UNUSED;
+		if ((rc = ov51x_new_frame(ov, !frmx))) {
+			err("ov51x_new_frame returned error");
+			goto error;
+		}
+	}
+
+	PDEBUG(4, "read finished, returning %ld (sweet)", count);
+
+	mutex_unlock(&ov->lock);
+	return count;
+
+error:
+	mutex_unlock(&ov->lock);
+	return rc;
+}
+
+static int
+ov51x_v4l1_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *vdev = file->private_data;
+	unsigned long start = vma->vm_start;
+	unsigned long size  = vma->vm_end - vma->vm_start;
+	struct usb_ov511 *ov = video_get_drvdata(vdev);
+	unsigned long page, pos;
+
+	if (ov->dev == NULL)
+		return -EIO;
+
+	PDEBUG(4, "mmap: %ld (%lX) bytes", size, size);
+
+	if (size > (((OV511_NUMFRAMES
+		      * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)
+		      + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))))
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&ov->lock))
+		return -EINTR;
+
+	pos = (unsigned long)ov->fbuf;
+	while (size > 0) {
+		page = vmalloc_to_pfn((void *)pos);
+		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
+			mutex_unlock(&ov->lock);
+			return -EAGAIN;
+		}
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		if (size > PAGE_SIZE)
+			size -= PAGE_SIZE;
+		else
+			size = 0;
+	}
+
+	mutex_unlock(&ov->lock);
+	return 0;
+}
+
+static struct file_operations ov511_fops = {
+	.owner =	THIS_MODULE,
+	.open =		ov51x_v4l1_open,
+	.release =	ov51x_v4l1_close,
+	.read =		ov51x_v4l1_read,
+	.mmap =		ov51x_v4l1_mmap,
+	.ioctl =	ov51x_v4l1_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.llseek =	no_llseek,
+};
+
+static struct video_device vdev_template = {
+	.owner =	THIS_MODULE,
+	.name =		"OV511 USB Camera",
+	.type =		VID_TYPE_CAPTURE,
+	.hardware =	VID_HARDWARE_OV511,
+	.fops =		&ov511_fops,
+	.release =	video_device_release,
+	.minor =	-1,
+};
+
+/****************************************************************************
+ *
+ * OV511 and sensor configuration
+ *
+ ***************************************************************************/
+
+/* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses
+ * the same register settings as the OV7610, since they are very similar.
+ */
+static int
+ov7xx0_configure(struct usb_ov511 *ov)
+{
+	int i, success;
+	int rc;
+
+	/* Lawrence Glaister <lg@jfm.bc.ca> reports:
+	 *
+	 * Register 0x0f in the 7610 has the following effects:
+	 *
+	 * 0x85 (AEC method 1): Best overall, good contrast range
+	 * 0x45 (AEC method 2): Very overexposed
+	 * 0xa5 (spec sheet default): Ok, but the black level is
+	 *	shifted resulting in loss of contrast
+	 * 0x05 (old driver setting): very overexposed, too much
+	 *	contrast
+	 */
+	static struct ov511_regvals aRegvalsNorm7610[] = {
+		{ OV511_I2C_BUS, 0x10, 0xff },
+		{ OV511_I2C_BUS, 0x16, 0x06 },
+		{ OV511_I2C_BUS, 0x28, 0x24 },
+		{ OV511_I2C_BUS, 0x2b, 0xac },
+		{ OV511_I2C_BUS, 0x12, 0x00 },
+		{ OV511_I2C_BUS, 0x38, 0x81 },
+		{ OV511_I2C_BUS, 0x28, 0x24 },	/* 0c */
+		{ OV511_I2C_BUS, 0x0f, 0x85 },	/* lg's setting */
+		{ OV511_I2C_BUS, 0x15, 0x01 },
+		{ OV511_I2C_BUS, 0x20, 0x1c },
+		{ OV511_I2C_BUS, 0x23, 0x2a },
+		{ OV511_I2C_BUS, 0x24, 0x10 },
+		{ OV511_I2C_BUS, 0x25, 0x8a },
+		{ OV511_I2C_BUS, 0x26, 0xa2 },
+		{ OV511_I2C_BUS, 0x27, 0xc2 },
+		{ OV511_I2C_BUS, 0x2a, 0x04 },
+		{ OV511_I2C_BUS, 0x2c, 0xfe },
+		{ OV511_I2C_BUS, 0x2d, 0x93 },
+		{ OV511_I2C_BUS, 0x30, 0x71 },
+		{ OV511_I2C_BUS, 0x31, 0x60 },
+		{ OV511_I2C_BUS, 0x32, 0x26 },
+		{ OV511_I2C_BUS, 0x33, 0x20 },
+		{ OV511_I2C_BUS, 0x34, 0x48 },
+		{ OV511_I2C_BUS, 0x12, 0x24 },
+		{ OV511_I2C_BUS, 0x11, 0x01 },
+		{ OV511_I2C_BUS, 0x0c, 0x24 },
+		{ OV511_I2C_BUS, 0x0d, 0x24 },
+		{ OV511_DONE_BUS, 0x0, 0x00 },
+	};
+
+	static struct ov511_regvals aRegvalsNorm7620[] = {
+		{ OV511_I2C_BUS, 0x00, 0x00 },
+		{ OV511_I2C_BUS, 0x01, 0x80 },
+		{ OV511_I2C_BUS, 0x02, 0x80 },
+		{ OV511_I2C_BUS, 0x03, 0xc0 },
+		{ OV511_I2C_BUS, 0x06, 0x60 },
+		{ OV511_I2C_BUS, 0x07, 0x00 },
+		{ OV511_I2C_BUS, 0x0c, 0x24 },
+		{ OV511_I2C_BUS, 0x0c, 0x24 },
+		{ OV511_I2C_BUS, 0x0d, 0x24 },
+		{ OV511_I2C_BUS, 0x11, 0x01 },
+		{ OV511_I2C_BUS, 0x12, 0x24 },
+		{ OV511_I2C_BUS, 0x13, 0x01 },
+		{ OV511_I2C_BUS, 0x14, 0x84 },
+		{ OV511_I2C_BUS, 0x15, 0x01 },
+		{ OV511_I2C_BUS, 0x16, 0x03 },
+		{ OV511_I2C_BUS, 0x17, 0x2f },
+		{ OV511_I2C_BUS, 0x18, 0xcf },
+		{ OV511_I2C_BUS, 0x19, 0x06 },
+		{ OV511_I2C_BUS, 0x1a, 0xf5 },
+		{ OV511_I2C_BUS, 0x1b, 0x00 },
+		{ OV511_I2C_BUS, 0x20, 0x18 },
+		{ OV511_I2C_BUS, 0x21, 0x80 },
+		{ OV511_I2C_BUS, 0x22, 0x80 },
+		{ OV511_I2C_BUS, 0x23, 0x00 },
+		{ OV511_I2C_BUS, 0x26, 0xa2 },
+		{ OV511_I2C_BUS, 0x27, 0xea },
+		{ OV511_I2C_BUS, 0x28, 0x20 },
+		{ OV511_I2C_BUS, 0x29, 0x00 },
+		{ OV511_I2C_BUS, 0x2a, 0x10 },
+		{ OV511_I2C_BUS, 0x2b, 0x00 },
+		{ OV511_I2C_BUS, 0x2c, 0x88 },
+		{ OV511_I2C_BUS, 0x2d, 0x91 },
+		{ OV511_I2C_BUS, 0x2e, 0x80 },
+		{ OV511_I2C_BUS, 0x2f, 0x44 },
+		{ OV511_I2C_BUS, 0x60, 0x27 },
+		{ OV511_I2C_BUS, 0x61, 0x02 },
+		{ OV511_I2C_BUS, 0x62, 0x5f },
+		{ OV511_I2C_BUS, 0x63, 0xd5 },
+		{ OV511_I2C_BUS, 0x64, 0x57 },
+		{ OV511_I2C_BUS, 0x65, 0x83 },
+		{ OV511_I2C_BUS, 0x66, 0x55 },
+		{ OV511_I2C_BUS, 0x67, 0x92 },
+		{ OV511_I2C_BUS, 0x68, 0xcf },
+		{ OV511_I2C_BUS, 0x69, 0x76 },
+		{ OV511_I2C_BUS, 0x6a, 0x22 },
+		{ OV511_I2C_BUS, 0x6b, 0x00 },
+		{ OV511_I2C_BUS, 0x6c, 0x02 },
+		{ OV511_I2C_BUS, 0x6d, 0x44 },
+		{ OV511_I2C_BUS, 0x6e, 0x80 },
+		{ OV511_I2C_BUS, 0x6f, 0x1d },
+		{ OV511_I2C_BUS, 0x70, 0x8b },
+		{ OV511_I2C_BUS, 0x71, 0x00 },
+		{ OV511_I2C_BUS, 0x72, 0x14 },
+		{ OV511_I2C_BUS, 0x73, 0x54 },
+		{ OV511_I2C_BUS, 0x74, 0x00 },
+		{ OV511_I2C_BUS, 0x75, 0x8e },
+		{ OV511_I2C_BUS, 0x76, 0x00 },
+		{ OV511_I2C_BUS, 0x77, 0xff },
+		{ OV511_I2C_BUS, 0x78, 0x80 },
+		{ OV511_I2C_BUS, 0x79, 0x80 },
+		{ OV511_I2C_BUS, 0x7a, 0x80 },
+		{ OV511_I2C_BUS, 0x7b, 0xe2 },
+		{ OV511_I2C_BUS, 0x7c, 0x00 },
+		{ OV511_DONE_BUS, 0x0, 0x00 },
+	};
+
+	PDEBUG(4, "starting configuration");
+
+	/* This looks redundant, but is necessary for WebCam 3 */
+	ov->primary_i2c_slave = OV7xx0_SID;
+	if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0)
+		return -1;
+
+	if (init_ov_sensor(ov) >= 0) {
+		PDEBUG(1, "OV7xx0 sensor initalized (method 1)");
+	} else {
+		/* Reset the 76xx */
+		if (i2c_w(ov, 0x12, 0x80) < 0)
+			return -1;
+
+		/* Wait for it to initialize */
+		msleep(150);
+
+		i = 0;
+		success = 0;
+		while (i <= i2c_detect_tries) {
+			if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) &&
+			    (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) {
+				success = 1;
+				break;
+			} else {
+				i++;
+			}
+		}
+
+// Was (i == i2c_detect_tries) previously. This obviously used to always report
+// success. Whether anyone actually depended on that bug is unknown
+		if ((i >= i2c_detect_tries) && (success == 0)) {
+			err("Failed to read sensor ID. You might not have an");
+			err("OV7610/20, or it may be not responding. Report");
+			err("this to " EMAIL);
+			err("This is only a warning. You can attempt to use");
+			err("your camera anyway");
+// Only issue a warning for now
+//			return -1;
+		} else {
+			PDEBUG(1, "OV7xx0 initialized (method 2, %dx)", i+1);
+		}
+	}
+
+	/* Detect sensor (sub)type */
+	rc = i2c_r(ov, OV7610_REG_COM_I);
+
+	if (rc < 0) {
+		err("Error detecting sensor type");
+		return -1;
+	} else if ((rc & 3) == 3) {
+		info("Sensor is an OV7610");
+		ov->sensor = SEN_OV7610;
+	} else if ((rc & 3) == 1) {
+		/* I don't know what's different about the 76BE yet. */
+		if (i2c_r(ov, 0x15) & 1)
+			info("Sensor is an OV7620AE");
+		else
+			info("Sensor is an OV76BE");
+
+		/* OV511+ will return all zero isoc data unless we
+		 * configure the sensor as a 7620. Someone needs to
+		 * find the exact reg. setting that causes this. */
+		if (ov->bridge == BRG_OV511PLUS) {
+			info("Enabling 511+/7620AE workaround");
+			ov->sensor = SEN_OV7620;
+		} else {
+			ov->sensor = SEN_OV76BE;
+		}
+	} else if ((rc & 3) == 0) {
+		info("Sensor is an OV7620");
+		ov->sensor = SEN_OV7620;
+	} else {
+		err("Unknown image sensor version: %d", rc & 3);
+		return -1;
+	}
+
+	if (ov->sensor == SEN_OV7620) {
+		PDEBUG(4, "Writing 7620 registers");
+		if (write_regvals(ov, aRegvalsNorm7620))
+			return -1;
+	} else {
+		PDEBUG(4, "Writing 7610 registers");
+		if (write_regvals(ov, aRegvalsNorm7610))
+			return -1;
+	}
+
+	/* Set sensor-specific vars */
+	ov->maxwidth = 640;
+	ov->maxheight = 480;
+	ov->minwidth = 64;
+	ov->minheight = 48;
+
+	// FIXME: These do not match the actual settings yet
+	ov->brightness = 0x80 << 8;
+	ov->contrast = 0x80 << 8;
+	ov->colour = 0x80 << 8;
+	ov->hue = 0x80 << 8;
+
+	return 0;
+}
+
+/* This initializes the OV6620, OV6630, OV6630AE, or OV6630AF sensor. */
+static int
+ov6xx0_configure(struct usb_ov511 *ov)
+{
+	int rc;
+
+	static struct ov511_regvals aRegvalsNorm6x20[] = {
+		{ OV511_I2C_BUS, 0x12, 0x80 }, /* reset */
+		{ OV511_I2C_BUS, 0x11, 0x01 },
+		{ OV511_I2C_BUS, 0x03, 0x60 },
+		{ OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */
+		{ OV511_I2C_BUS, 0x07, 0xa8 },
+		/* The ratio of 0x0c and 0x0d  controls the white point */
+		{ OV511_I2C_BUS, 0x0c, 0x24 },
+		{ OV511_I2C_BUS, 0x0d, 0x24 },
+		{ OV511_I2C_BUS, 0x0f, 0x15 }, /* COMS */
+		{ OV511_I2C_BUS, 0x10, 0x75 }, /* AEC Exposure time */
+		{ OV511_I2C_BUS, 0x12, 0x24 }, /* Enable AGC */
+		{ OV511_I2C_BUS, 0x14, 0x04 },
+		/* 0x16: 0x06 helps frame stability with moving objects */
+		{ OV511_I2C_BUS, 0x16, 0x06 },
+//		{ OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */
+		{ OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */
+		/* 0x28: 0x05 Selects RGB format if RGB on */
+		{ OV511_I2C_BUS, 0x28, 0x05 },
+		{ OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */
+//		{ OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */
+		{ OV511_I2C_BUS, 0x2d, 0x99 },
+		{ OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */
+		{ OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */
+		{ OV511_I2C_BUS, 0x38, 0x8b },
+		{ OV511_I2C_BUS, 0x39, 0x40 },
+
+		{ OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */
+		{ OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */
+		{ OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */
+
+		{ OV511_I2C_BUS, 0x3d, 0x80 },
+		/* These next two registers (0x4a, 0x4b) are undocumented. They
+		 * control the color balance */
+		{ OV511_I2C_BUS, 0x4a, 0x80 },
+		{ OV511_I2C_BUS, 0x4b, 0x80 },
+		{ OV511_I2C_BUS, 0x4d, 0xd2 }, /* This reduces noise a bit */
+		{ OV511_I2C_BUS, 0x4e, 0xc1 },
+		{ OV511_I2C_BUS, 0x4f, 0x04 },
+// Do 50-53 have any effect?
+// Toggle 0x12[2] off and on here?
+		{ OV511_DONE_BUS, 0x0, 0x00 },	/* END MARKER */
+	};
+
+	static struct ov511_regvals aRegvalsNorm6x30[] = {
+	/*OK*/	{ OV511_I2C_BUS, 0x12, 0x80 }, /* reset */
+		{ OV511_I2C_BUS, 0x11, 0x00 },
+	/*OK*/	{ OV511_I2C_BUS, 0x03, 0x60 },
+	/*0A?*/	{ OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */
+		{ OV511_I2C_BUS, 0x07, 0xa8 },
+		/* The ratio of 0x0c and 0x0d  controls the white point */
+	/*OK*/	{ OV511_I2C_BUS, 0x0c, 0x24 },
+	/*OK*/	{ OV511_I2C_BUS, 0x0d, 0x24 },
+	/*A*/	{ OV511_I2C_BUS, 0x0e, 0x20 },
+//	/*04?*/	{ OV511_I2C_BUS, 0x14, 0x80 },
+		{ OV511_I2C_BUS, 0x16, 0x03 },
+//	/*OK*/	{ OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */
+		// 21 & 22? The suggested values look wrong. Go with default
+	/*A*/	{ OV511_I2C_BUS, 0x23, 0xc0 },
+	/*A*/	{ OV511_I2C_BUS, 0x25, 0x9a }, // Check this against default
+//	/*OK*/	{ OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */
+
+		/* 0x28: 0x05 Selects RGB format if RGB on */
+//	/*04?*/	{ OV511_I2C_BUS, 0x28, 0x05 },
+//	/*04?*/	{ OV511_I2C_BUS, 0x28, 0x45 }, // DEBUG: Tristate UV bus
+
+	/*OK*/	{ OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */
+//	/*OK*/	{ OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */
+		{ OV511_I2C_BUS, 0x2d, 0x99 },
+//	/*A*/	{ OV511_I2C_BUS, 0x33, 0x26 }, // Reserved bits on 6620
+//	/*d2?*/	{ OV511_I2C_BUS, 0x34, 0x03 }, /* Max A/D range */
+//	/*8b?*/	{ OV511_I2C_BUS, 0x38, 0x83 },
+//	/*40?*/	{ OV511_I2C_BUS, 0x39, 0xc0 }, // 6630 adds bit 7
+//		{ OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */
+//		{ OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */
+//		{ OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */
+		{ OV511_I2C_BUS, 0x3d, 0x80 },
+//	/*A*/	{ OV511_I2C_BUS, 0x3f, 0x0e },
+
+		/* These next two registers (0x4a, 0x4b) are undocumented. They
+		 * control the color balance */
+//	/*OK?*/	{ OV511_I2C_BUS, 0x4a, 0x80 }, // Check these
+//	/*OK?*/	{ OV511_I2C_BUS, 0x4b, 0x80 },
+		{ OV511_I2C_BUS, 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
+	/*c1?*/	{ OV511_I2C_BUS, 0x4e, 0x40 },
+
+		/* UV average mode, color killer: strongest */
+		{ OV511_I2C_BUS, 0x4f, 0x07 },
+
+		{ OV511_I2C_BUS, 0x54, 0x23 }, /* Max AGC gain: 18dB */
+		{ OV511_I2C_BUS, 0x57, 0x81 }, /* (default) */
+		{ OV511_I2C_BUS, 0x59, 0x01 }, /* AGC dark current comp: +1 */
+		{ OV511_I2C_BUS, 0x5a, 0x2c }, /* (undocumented) */
+		{ OV511_I2C_BUS, 0x5b, 0x0f }, /* AWB chrominance levels */
+//		{ OV511_I2C_BUS, 0x5c, 0x10 },
+		{ OV511_DONE_BUS, 0x0, 0x00 },	/* END MARKER */
+	};
+
+	PDEBUG(4, "starting sensor configuration");
+
+	if (init_ov_sensor(ov) < 0) {
+		err("Failed to read sensor ID. You might not have an OV6xx0,");
+		err("or it may be not responding. Report this to " EMAIL);
+		return -1;
+	} else {
+		PDEBUG(1, "OV6xx0 sensor detected");
+	}
+
+	/* Detect sensor (sub)type */
+	rc = i2c_r(ov, OV7610_REG_COM_I);
+
+	if (rc < 0) {
+		err("Error detecting sensor type");
+		return -1;
+	}
+
+	if ((rc & 3) == 0) {
+		ov->sensor = SEN_OV6630;
+		info("Sensor is an OV6630");
+	} else if ((rc & 3) == 1) {
+		ov->sensor = SEN_OV6620;
+		info("Sensor is an OV6620");
+	} else if ((rc & 3) == 2) {
+		ov->sensor = SEN_OV6630;
+		info("Sensor is an OV6630AE");
+	} else if ((rc & 3) == 3) {
+		ov->sensor = SEN_OV6630;
+		info("Sensor is an OV6630AF");
+	}
+
+	/* Set sensor-specific vars */
+	ov->maxwidth = 352;
+	ov->maxheight = 288;
+	ov->minwidth = 64;
+	ov->minheight = 48;
+
+	// FIXME: These do not match the actual settings yet
+	ov->brightness = 0x80 << 8;
+	ov->contrast = 0x80 << 8;
+	ov->colour = 0x80 << 8;
+	ov->hue = 0x80 << 8;
+
+	if (ov->sensor == SEN_OV6620) {
+		PDEBUG(4, "Writing 6x20 registers");
+		if (write_regvals(ov, aRegvalsNorm6x20))
+			return -1;
+	} else {
+		PDEBUG(4, "Writing 6x30 registers");
+		if (write_regvals(ov, aRegvalsNorm6x30))
+			return -1;
+	}
+
+	return 0;
+}
+
+/* This initializes the KS0127 and KS0127B video decoders. */
+static int
+ks0127_configure(struct usb_ov511 *ov)
+{
+	int rc;
+
+// FIXME: I don't know how to sync or reset it yet
+#if 0
+	if (ov51x_init_ks_sensor(ov) < 0) {
+		err("Failed to initialize the KS0127");
+		return -1;
+	} else {
+		PDEBUG(1, "KS012x(B) sensor detected");
+	}
+#endif
+
+	/* Detect decoder subtype */
+	rc = i2c_r(ov, 0x00);
+	if (rc < 0) {
+		err("Error detecting sensor type");
+		return -1;
+	} else if (rc & 0x08) {
+		rc = i2c_r(ov, 0x3d);
+		if (rc < 0) {
+			err("Error detecting sensor type");
+			return -1;
+		} else if ((rc & 0x0f) == 0) {
+			info("Sensor is a KS0127");
+			ov->sensor = SEN_KS0127;
+		} else if ((rc & 0x0f) == 9) {
+			info("Sensor is a KS0127B Rev. A");
+			ov->sensor = SEN_KS0127B;
+		}
+	} else {
+		err("Error: Sensor is an unsupported KS0122");
+		return -1;
+	}
+
+	/* Set sensor-specific vars */
+	ov->maxwidth = 640;
+	ov->maxheight = 480;
+	ov->minwidth = 64;
+	ov->minheight = 48;
+
+	// FIXME: These do not match the actual settings yet
+	ov->brightness = 0x80 << 8;
+	ov->contrast = 0x80 << 8;
+	ov->colour = 0x80 << 8;
+	ov->hue = 0x80 << 8;
+
+	/* This device is not supported yet. Bail out now... */
+	err("This sensor is not supported yet.");
+	return -1;
+
+	return 0;
+}
+
+/* This initializes the SAA7111A video decoder. */
+static int
+saa7111a_configure(struct usb_ov511 *ov)
+{
+	int rc;
+
+	/* Since there is no register reset command, all registers must be
+	 * written, otherwise gives erratic results */
+	static struct ov511_regvals aRegvalsNormSAA7111A[] = {
+		{ OV511_I2C_BUS, 0x06, 0xce },
+		{ OV511_I2C_BUS, 0x07, 0x00 },
+		{ OV511_I2C_BUS, 0x10, 0x44 }, /* YUV422, 240/286 lines */
+		{ OV511_I2C_BUS, 0x0e, 0x01 }, /* NTSC M or PAL BGHI */
+		{ OV511_I2C_BUS, 0x00, 0x00 },
+		{ OV511_I2C_BUS, 0x01, 0x00 },
+		{ OV511_I2C_BUS, 0x03, 0x23 },
+		{ OV511_I2C_BUS, 0x04, 0x00 },
+		{ OV511_I2C_BUS, 0x05, 0x00 },
+		{ OV511_I2C_BUS, 0x08, 0xc8 }, /* Auto field freq */
+		{ OV511_I2C_BUS, 0x09, 0x01 }, /* Chrom. trap off, APER=0.25 */
+		{ OV511_I2C_BUS, 0x0a, 0x80 }, /* BRIG=128 */
+		{ OV511_I2C_BUS, 0x0b, 0x40 }, /* CONT=1.0 */
+		{ OV511_I2C_BUS, 0x0c, 0x40 }, /* SATN=1.0 */
+		{ OV511_I2C_BUS, 0x0d, 0x00 }, /* HUE=0 */
+		{ OV511_I2C_BUS, 0x0f, 0x00 },
+		{ OV511_I2C_BUS, 0x11, 0x0c },
+		{ OV511_I2C_BUS, 0x12, 0x00 },
+		{ OV511_I2C_BUS, 0x13, 0x00 },
+		{ OV511_I2C_BUS, 0x14, 0x00 },
+		{ OV511_I2C_BUS, 0x15, 0x00 },
+		{ OV511_I2C_BUS, 0x16, 0x00 },
+		{ OV511_I2C_BUS, 0x17, 0x00 },
+		{ OV511_I2C_BUS, 0x02, 0xc0 },	/* Composite input 0 */
+		{ OV511_DONE_BUS, 0x0, 0x00 },
+	};
+
+// FIXME: I don't know how to sync or reset it yet
+#if 0
+	if (ov51x_init_saa_sensor(ov) < 0) {
+		err("Failed to initialize the SAA7111A");
+		return -1;
+	} else {
+		PDEBUG(1, "SAA7111A sensor detected");
+	}
+#endif
+
+	/* 640x480 not supported with PAL */
+	if (ov->pal) {
+		ov->maxwidth = 320;
+		ov->maxheight = 240;		/* Even field only */
+	} else {
+		ov->maxwidth = 640;
+		ov->maxheight = 480;		/* Even/Odd fields */
+	}
+
+	ov->minwidth = 320;
+	ov->minheight = 240;		/* Even field only */
+
+	ov->has_decoder = 1;
+	ov->num_inputs = 8;
+	ov->norm = VIDEO_MODE_AUTO;
+	ov->stop_during_set = 0;	/* Decoder guarantees stable image */
+
+	/* Decoder doesn't change these values, so we use these instead of
+	 * acutally reading the registers (which doesn't work) */
+	ov->brightness = 0x80 << 8;
+	ov->contrast = 0x40 << 9;
+	ov->colour = 0x40 << 9;
+	ov->hue = 32768;
+
+	PDEBUG(4, "Writing SAA7111A registers");
+	if (write_regvals(ov, aRegvalsNormSAA7111A))
+		return -1;
+
+	/* Detect version of decoder. This must be done after writing the
+	 * initial regs or the decoder will lock up. */
+	rc = i2c_r(ov, 0x00);
+
+	if (rc < 0) {
+		err("Error detecting sensor version");
+		return -1;
+	} else {
+		info("Sensor is an SAA7111A (version 0x%x)", rc);
+		ov->sensor = SEN_SAA7111A;
+	}
+
+	// FIXME: Fix this for OV518(+)
+	/* Latch to negative edge of clock. Otherwise, we get incorrect
+	 * colors and jitter in the digital signal. */
+	if (ov->bclass == BCL_OV511)
+		reg_w(ov, 0x11, 0x00);
+	else
+		warn("SAA7111A not yet supported with OV518/OV518+");
+
+	return 0;
+}
+
+/* This initializes the OV511/OV511+ and the sensor */
+static int
+ov511_configure(struct usb_ov511 *ov)
+{
+	static struct ov511_regvals aRegvalsInit511[] = {
+		{ OV511_REG_BUS, R51x_SYS_RESET,	0x7f },
+		{ OV511_REG_BUS, R51x_SYS_INIT,		0x01 },
+		{ OV511_REG_BUS, R51x_SYS_RESET,	0x7f },
+		{ OV511_REG_BUS, R51x_SYS_INIT,		0x01 },
+		{ OV511_REG_BUS, R51x_SYS_RESET,	0x3f },
+		{ OV511_REG_BUS, R51x_SYS_INIT,		0x01 },
+		{ OV511_REG_BUS, R51x_SYS_RESET,	0x3d },
+		{ OV511_DONE_BUS, 0x0, 0x00},
+	};
+
+	static struct ov511_regvals aRegvalsNorm511[] = {
+		{ OV511_REG_BUS, R511_DRAM_FLOW_CTL, 	0x01 },
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x00 },
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x02 },
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x00 },
+		{ OV511_REG_BUS, R511_FIFO_OPTS,	0x1f },
+		{ OV511_REG_BUS, R511_COMP_EN,		0x00 },
+		{ OV511_REG_BUS, R511_COMP_LUT_EN,	0x03 },
+		{ OV511_DONE_BUS, 0x0, 0x00 },
+	};
+
+	static struct ov511_regvals aRegvalsNorm511Plus[] = {
+		{ OV511_REG_BUS, R511_DRAM_FLOW_CTL,	0xff },
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x00 },
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x02 },
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x00 },
+		{ OV511_REG_BUS, R511_FIFO_OPTS,	0xff },
+		{ OV511_REG_BUS, R511_COMP_EN,		0x00 },
+		{ OV511_REG_BUS, R511_COMP_LUT_EN,	0x03 },
+		{ OV511_DONE_BUS, 0x0, 0x00 },
+	};
+
+	PDEBUG(4, "");
+
+	ov->customid = reg_r(ov, R511_SYS_CUST_ID);
+	if (ov->customid < 0) {
+		err("Unable to read camera bridge registers");
+		goto error;
+	}
+
+	PDEBUG (1, "CustomID = %d", ov->customid);
+	ov->desc = symbolic(camlist, ov->customid);
+	info("model: %s", ov->desc);
+
+	if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) {
+		err("Camera type (%d) not recognized", ov->customid);
+		err("Please notify " EMAIL " of the name,");
+		err("manufacturer, model, and this number of your camera.");
+		err("Also include the output of the detection process.");
+	}
+
+	if (ov->customid == 70)		/* USB Life TV (PAL/SECAM) */
+		ov->pal = 1;
+
+	if (write_regvals(ov, aRegvalsInit511))
+		goto error;
+
+	if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO)
+		ov51x_led_control(ov, 0);
+
+	/* The OV511+ has undocumented bits in the flow control register.
+	 * Setting it to 0xff fixes the corruption with moving objects. */
+	if (ov->bridge == BRG_OV511) {
+		if (write_regvals(ov, aRegvalsNorm511))
+			goto error;
+	} else if (ov->bridge == BRG_OV511PLUS) {
+		if (write_regvals(ov, aRegvalsNorm511Plus))
+			goto error;
+	} else {
+		err("Invalid bridge");
+	}
+
+	if (ov511_init_compression(ov))
+		goto error;
+
+	ov->packet_numbering = 1;
+	ov511_set_packet_size(ov, 0);
+
+	ov->snap_enabled = snapshot;
+
+	/* Test for 7xx0 */
+	PDEBUG(3, "Testing for 0V7xx0");
+	ov->primary_i2c_slave = OV7xx0_SID;
+	if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0)
+		goto error;
+
+	if (i2c_w(ov, 0x12, 0x80) < 0) {
+		/* Test for 6xx0 */
+		PDEBUG(3, "Testing for 0V6xx0");
+		ov->primary_i2c_slave = OV6xx0_SID;
+		if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0)
+			goto error;
+
+		if (i2c_w(ov, 0x12, 0x80) < 0) {
+			/* Test for 8xx0 */
+			PDEBUG(3, "Testing for 0V8xx0");
+			ov->primary_i2c_slave = OV8xx0_SID;
+			if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0)
+				goto error;
+
+			if (i2c_w(ov, 0x12, 0x80) < 0) {
+				/* Test for SAA7111A */
+				PDEBUG(3, "Testing for SAA7111A");
+				ov->primary_i2c_slave = SAA7111A_SID;
+				if (ov51x_set_slave_ids(ov, SAA7111A_SID) < 0)
+					goto error;
+
+				if (i2c_w(ov, 0x0d, 0x00) < 0) {
+					/* Test for KS0127 */
+					PDEBUG(3, "Testing for KS0127");
+					ov->primary_i2c_slave = KS0127_SID;
+					if (ov51x_set_slave_ids(ov, KS0127_SID) < 0)
+						goto error;
+
+					if (i2c_w(ov, 0x10, 0x00) < 0) {
+						err("Can't determine sensor slave IDs");
+						goto error;
+					} else {
+						if (ks0127_configure(ov) < 0) {
+							err("Failed to configure KS0127");
+							goto error;
+						}
+					}
+				} else {
+					if (saa7111a_configure(ov) < 0) {
+						err("Failed to configure SAA7111A");
+						goto error;
+					}
+				}
+			} else {
+				err("Detected unsupported OV8xx0 sensor");
+				goto error;
+			}
+		} else {
+			if (ov6xx0_configure(ov) < 0) {
+				err("Failed to configure OV6xx0");
+				goto error;
+			}
+		}
+	} else {
+		if (ov7xx0_configure(ov) < 0) {
+			err("Failed to configure OV7xx0");
+			goto error;
+		}
+	}
+
+	return 0;
+
+error:
+	err("OV511 Config failed");
+
+	return -EBUSY;
+}
+
+/* This initializes the OV518/OV518+ and the sensor */
+static int
+ov518_configure(struct usb_ov511 *ov)
+{
+	/* For 518 and 518+ */
+	static struct ov511_regvals aRegvalsInit518[] = {
+		{ OV511_REG_BUS, R51x_SYS_RESET,	0x40 },
+		{ OV511_REG_BUS, R51x_SYS_INIT,		0xe1 },
+		{ OV511_REG_BUS, R51x_SYS_RESET,	0x3e },
+		{ OV511_REG_BUS, R51x_SYS_INIT,		0xe1 },
+		{ OV511_REG_BUS, R51x_SYS_RESET,	0x00 },
+		{ OV511_REG_BUS, R51x_SYS_INIT,		0xe1 },
+		{ OV511_REG_BUS, 0x46,			0x00 },
+		{ OV511_REG_BUS, 0x5d,			0x03 },
+		{ OV511_DONE_BUS, 0x0, 0x00},
+	};
+
+	static struct ov511_regvals aRegvalsNorm518[] = {
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x02 }, /* Reset */
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x01 }, /* Enable */
+		{ OV511_REG_BUS, 0x31, 			0x0f },
+		{ OV511_REG_BUS, 0x5d,			0x03 },
+		{ OV511_REG_BUS, 0x24,			0x9f },
+		{ OV511_REG_BUS, 0x25,			0x90 },
+		{ OV511_REG_BUS, 0x20,			0x00 },
+		{ OV511_REG_BUS, 0x51,			0x04 },
+		{ OV511_REG_BUS, 0x71,			0x19 },
+		{ OV511_DONE_BUS, 0x0, 0x00 },
+	};
+
+	static struct ov511_regvals aRegvalsNorm518Plus[] = {
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x02 }, /* Reset */
+		{ OV511_REG_BUS, R51x_SYS_SNAP,		0x01 }, /* Enable */
+		{ OV511_REG_BUS, 0x31, 			0x0f },
+		{ OV511_REG_BUS, 0x5d,			0x03 },
+		{ OV511_REG_BUS, 0x24,			0x9f },
+		{ OV511_REG_BUS, 0x25,			0x90 },
+		{ OV511_REG_BUS, 0x20,			0x60 },
+		{ OV511_REG_BUS, 0x51,			0x02 },
+		{ OV511_REG_BUS, 0x71,			0x19 },
+		{ OV511_REG_BUS, 0x40,			0xff },
+		{ OV511_REG_BUS, 0x41,			0x42 },
+		{ OV511_REG_BUS, 0x46,			0x00 },
+		{ OV511_REG_BUS, 0x33,			0x04 },
+		{ OV511_REG_BUS, 0x21,			0x19 },
+		{ OV511_REG_BUS, 0x3f,			0x10 },
+		{ OV511_DONE_BUS, 0x0, 0x00 },
+	};
+
+	PDEBUG(4, "");
+
+	/* First 5 bits of custom ID reg are a revision ID on OV518 */
+	info("Device revision %d", 0x1F & reg_r(ov, R511_SYS_CUST_ID));
+
+	/* Give it the default description */
+	ov->desc = symbolic(camlist, 0);
+
+	if (write_regvals(ov, aRegvalsInit518))
+		goto error;
+
+	/* Set LED GPIO pin to output mode */
+	if (reg_w_mask(ov, 0x57, 0x00, 0x02) < 0)
+		goto error;
+
+	/* LED is off by default with OV518; have to explicitly turn it on */
+	if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO)
+		ov51x_led_control(ov, 0);
+	else
+		ov51x_led_control(ov, 1);
+
+	/* Don't require compression if dumppix is enabled; otherwise it's
+	 * required. OV518 has no uncompressed mode, to save RAM. */
+	if (!dumppix && !ov->compress) {
+		ov->compress = 1;
+		warn("Compression required with OV518...enabling");
+	}
+
+	if (ov->bridge == BRG_OV518) {
+		if (write_regvals(ov, aRegvalsNorm518))
+			goto error;
+	} else if (ov->bridge == BRG_OV518PLUS) {
+		if (write_regvals(ov, aRegvalsNorm518Plus))
+			goto error;
+	} else {
+		err("Invalid bridge");
+	}
+
+	if (reg_w(ov, 0x2f, 0x80) < 0)
+		goto error;
+
+	if (ov518_init_compression(ov))
+		goto error;
+
+	if (ov->bridge == BRG_OV518)
+	{
+		struct usb_interface *ifp;
+		struct usb_host_interface *alt;
+		__u16 mxps = 0;
+
+		ifp = usb_ifnum_to_if(ov->dev, 0);
+		if (ifp) {
+			alt = usb_altnum_to_altsetting(ifp, 7);
+			if (alt)
+				mxps = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+		}
+
+		/* Some OV518s have packet numbering by default, some don't */
+		if (mxps == 897)
+			ov->packet_numbering = 1;
+		else
+			ov->packet_numbering = 0;
+	} else {
+		/* OV518+ has packet numbering turned on by default */
+		ov->packet_numbering = 1;
+	}
+
+	ov518_set_packet_size(ov, 0);
+
+	ov->snap_enabled = snapshot;
+
+	/* Test for 76xx */
+	ov->primary_i2c_slave = OV7xx0_SID;
+	if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0)
+		goto error;
+
+	/* The OV518 must be more aggressive about sensor detection since
+	 * I2C write will never fail if the sensor is not present. We have
+	 * to try to initialize the sensor to detect its presence */
+
+	if (init_ov_sensor(ov) < 0) {
+		/* Test for 6xx0 */
+		ov->primary_i2c_slave = OV6xx0_SID;
+		if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0)
+			goto error;
+
+		if (init_ov_sensor(ov) < 0) {
+			/* Test for 8xx0 */
+			ov->primary_i2c_slave = OV8xx0_SID;
+			if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0)
+				goto error;
+
+			if (init_ov_sensor(ov) < 0) {
+				err("Can't determine sensor slave IDs");
+				goto error;
+			} else {
+				err("Detected unsupported OV8xx0 sensor");
+				goto error;
+			}
+		} else {
+			if (ov6xx0_configure(ov) < 0) {
+				err("Failed to configure OV6xx0");
+				goto error;
+			}
+		}
+	} else {
+		if (ov7xx0_configure(ov) < 0) {
+			err("Failed to configure OV7xx0");
+			goto error;
+		}
+	}
+
+	ov->maxwidth = 352;
+	ov->maxheight = 288;
+
+	// The OV518 cannot go as low as the sensor can
+	ov->minwidth = 160;
+	ov->minheight = 120;
+
+	return 0;
+
+error:
+	err("OV518 Config failed");
+
+	return -EBUSY;
+}
+
+/****************************************************************************
+ *  sysfs
+ ***************************************************************************/
+
+static inline struct usb_ov511 *cd_to_ov(struct class_device *cd)
+{
+	struct video_device *vdev = to_video_device(cd);
+	return video_get_drvdata(vdev);
+}
+
+static ssize_t show_custom_id(struct class_device *cd, char *buf)
+{
+	struct usb_ov511 *ov = cd_to_ov(cd);
+	return sprintf(buf, "%d\n", ov->customid);
+}
+static CLASS_DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL);
+
+static ssize_t show_model(struct class_device *cd, char *buf)
+{
+	struct usb_ov511 *ov = cd_to_ov(cd);
+	return sprintf(buf, "%s\n", ov->desc);
+}
+static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
+
+static ssize_t show_bridge(struct class_device *cd, char *buf)
+{
+	struct usb_ov511 *ov = cd_to_ov(cd);
+	return sprintf(buf, "%s\n", symbolic(brglist, ov->bridge));
+}
+static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL);
+
+static ssize_t show_sensor(struct class_device *cd, char *buf)
+{
+	struct usb_ov511 *ov = cd_to_ov(cd);
+	return sprintf(buf, "%s\n", symbolic(senlist, ov->sensor));
+}
+static CLASS_DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL);
+
+static ssize_t show_brightness(struct class_device *cd, char *buf)
+{
+	struct usb_ov511 *ov = cd_to_ov(cd);
+	unsigned short x;
+
+	if (!ov->dev)
+		return -ENODEV;
+	sensor_get_brightness(ov, &x);
+	return sprintf(buf, "%d\n", x >> 8);
+}
+static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
+
+static ssize_t show_saturation(struct class_device *cd, char *buf)
+{
+	struct usb_ov511 *ov = cd_to_ov(cd);
+	unsigned short x;
+
+	if (!ov->dev)
+		return -ENODEV;
+	sensor_get_saturation(ov, &x);
+	return sprintf(buf, "%d\n", x >> 8);
+}
+static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
+
+static ssize_t show_contrast(struct class_device *cd, char *buf)
+{
+	struct usb_ov511 *ov = cd_to_ov(cd);
+	unsigned short x;
+
+	if (!ov->dev)
+		return -ENODEV;
+	sensor_get_contrast(ov, &x);
+	return sprintf(buf, "%d\n", x >> 8);
+}
+static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
+
+static ssize_t show_hue(struct class_device *cd, char *buf)
+{
+	struct usb_ov511 *ov = cd_to_ov(cd);
+	unsigned short x;
+
+	if (!ov->dev)
+		return -ENODEV;
+	sensor_get_hue(ov, &x);
+	return sprintf(buf, "%d\n", x >> 8);
+}
+static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
+
+static ssize_t show_exposure(struct class_device *cd, char *buf)
+{
+	struct usb_ov511 *ov = cd_to_ov(cd);
+	unsigned char exp = 0;
+
+	if (!ov->dev)
+		return -ENODEV;
+	sensor_get_exposure(ov, &exp);
+	return sprintf(buf, "%d\n", exp >> 8);
+}
+static CLASS_DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL);
+
+static void ov_create_sysfs(struct video_device *vdev)
+{
+	video_device_create_file(vdev, &class_device_attr_custom_id);
+	video_device_create_file(vdev, &class_device_attr_model);
+	video_device_create_file(vdev, &class_device_attr_bridge);
+	video_device_create_file(vdev, &class_device_attr_sensor);
+	video_device_create_file(vdev, &class_device_attr_brightness);
+	video_device_create_file(vdev, &class_device_attr_saturation);
+	video_device_create_file(vdev, &class_device_attr_contrast);
+	video_device_create_file(vdev, &class_device_attr_hue);
+	video_device_create_file(vdev, &class_device_attr_exposure);
+}
+
+/****************************************************************************
+ *  USB routines
+ ***************************************************************************/
+
+static int
+ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_interface_descriptor *idesc;
+	struct usb_ov511 *ov;
+	int i;
+
+	PDEBUG(1, "probing for device...");
+
+	/* We don't handle multi-config cameras */
+	if (dev->descriptor.bNumConfigurations != 1)
+		return -ENODEV;
+
+	idesc = &intf->cur_altsetting->desc;
+
+	if (idesc->bInterfaceClass != 0xFF)
+		return -ENODEV;
+	if (idesc->bInterfaceSubClass != 0x00)
+		return -ENODEV;
+
+	if ((ov = kzalloc(sizeof(*ov), GFP_KERNEL)) == NULL) {
+		err("couldn't kmalloc ov struct");
+		goto error_out;
+	}
+
+	ov->dev = dev;
+	ov->iface = idesc->bInterfaceNumber;
+	ov->led_policy = led;
+	ov->compress = compress;
+	ov->lightfreq = lightfreq;
+	ov->num_inputs = 1;	   /* Video decoder init functs. change this */
+	ov->stop_during_set = !fastset;
+	ov->backlight = backlight;
+	ov->mirror = mirror;
+	ov->auto_brt = autobright;
+	ov->auto_gain = autogain;
+	ov->auto_exp = autoexp;
+
+	switch (le16_to_cpu(dev->descriptor.idProduct)) {
+	case PROD_OV511:
+		ov->bridge = BRG_OV511;
+		ov->bclass = BCL_OV511;
+		break;
+	case PROD_OV511PLUS:
+		ov->bridge = BRG_OV511PLUS;
+		ov->bclass = BCL_OV511;
+		break;
+	case PROD_OV518:
+		ov->bridge = BRG_OV518;
+		ov->bclass = BCL_OV518;
+		break;
+	case PROD_OV518PLUS:
+		ov->bridge = BRG_OV518PLUS;
+		ov->bclass = BCL_OV518;
+		break;
+	case PROD_ME2CAM:
+		if (le16_to_cpu(dev->descriptor.idVendor) != VEND_MATTEL)
+			goto error;
+		ov->bridge = BRG_OV511PLUS;
+		ov->bclass = BCL_OV511;
+		break;
+	default:
+		err("Unknown product ID 0x%04x", le16_to_cpu(dev->descriptor.idProduct));
+		goto error;
+	}
+
+	info("USB %s video device found", symbolic(brglist, ov->bridge));
+
+	init_waitqueue_head(&ov->wq);
+
+	mutex_init(&ov->lock);	/* to 1 == available */
+	mutex_init(&ov->buf_lock);
+	mutex_init(&ov->i2c_lock);
+	mutex_init(&ov->cbuf_lock);
+
+	ov->buf_state = BUF_NOT_ALLOCATED;
+
+	if (usb_make_path(dev, ov->usb_path, OV511_USB_PATH_LEN) < 0) {
+		err("usb_make_path error");
+		goto error;
+	}
+
+	/* Allocate control transfer buffer. */
+	/* Must be kmalloc()'ed, for DMA compatibility */
+	ov->cbuf = kmalloc(OV511_CBUF_SIZE, GFP_KERNEL);
+	if (!ov->cbuf)
+		goto error;
+
+	if (ov->bclass == BCL_OV518) {
+		if (ov518_configure(ov) < 0)
+			goto error;
+	} else {
+		if (ov511_configure(ov) < 0)
+			goto error;
+	}
+
+	for (i = 0; i < OV511_NUMFRAMES; i++) {
+		ov->frame[i].framenum = i;
+		init_waitqueue_head(&ov->frame[i].wq);
+	}
+
+	for (i = 0; i < OV511_NUMSBUF; i++) {
+		ov->sbuf[i].ov = ov;
+		spin_lock_init(&ov->sbuf[i].lock);
+		ov->sbuf[i].n = i;
+	}
+
+	/* Unnecessary? (This is done on open(). Need to make sure variables
+	 * are properly initialized without this before removing it, though). */
+	if (ov51x_set_default_params(ov) < 0)
+		goto error;
+
+#ifdef OV511_DEBUG
+	if (dump_bridge) {
+		if (ov->bclass == BCL_OV511)
+			ov511_dump_regs(ov);
+		else
+			ov518_dump_regs(ov);
+	}
+#endif
+
+	ov->vdev = video_device_alloc();
+	if (!ov->vdev)
+		goto error;
+
+	memcpy(ov->vdev, &vdev_template, sizeof(*ov->vdev));
+	ov->vdev->dev = &dev->dev;
+	video_set_drvdata(ov->vdev, ov);
+
+	for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) {
+		/* Minor 0 cannot be specified; assume user wants autodetect */
+		if (unit_video[i] == 0)
+			break;
+
+		if (video_register_device(ov->vdev, VFL_TYPE_GRABBER,
+			unit_video[i]) >= 0) {
+			break;
+		}
+	}
+
+	/* Use the next available one */
+	if ((ov->vdev->minor == -1) &&
+	    video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1) < 0) {
+		err("video_register_device failed");
+		goto error;
+	}
+
+	info("Device at %s registered to minor %d", ov->usb_path,
+	     ov->vdev->minor);
+
+	usb_set_intfdata(intf, ov);
+	ov_create_sysfs(ov->vdev);
+	return 0;
+
+error:
+	if (ov->vdev) {
+		if (-1 == ov->vdev->minor)
+			video_device_release(ov->vdev);
+		else
+			video_unregister_device(ov->vdev);
+		ov->vdev = NULL;
+	}
+
+	if (ov->cbuf) {
+		mutex_lock(&ov->cbuf_lock);
+		kfree(ov->cbuf);
+		ov->cbuf = NULL;
+		mutex_unlock(&ov->cbuf_lock);
+	}
+
+	kfree(ov);
+	ov = NULL;
+
+error_out:
+	err("Camera initialization failed");
+	return -EIO;
+}
+
+static void
+ov51x_disconnect(struct usb_interface *intf)
+{
+	struct usb_ov511 *ov = usb_get_intfdata(intf);
+	int n;
+
+	PDEBUG(3, "");
+
+	usb_set_intfdata (intf, NULL);
+
+	if (!ov)
+		return;
+
+	if (ov->vdev)
+		video_unregister_device(ov->vdev);
+
+	for (n = 0; n < OV511_NUMFRAMES; n++)
+		ov->frame[n].grabstate = FRAME_ERROR;
+
+	ov->curframe = -1;
+
+	/* This will cause the process to request another frame */
+	for (n = 0; n < OV511_NUMFRAMES; n++)
+		wake_up_interruptible(&ov->frame[n].wq);
+
+	wake_up_interruptible(&ov->wq);
+
+	ov->streaming = 0;
+	ov51x_unlink_isoc(ov);
+
+	ov->dev = NULL;
+
+	/* Free the memory */
+	if (ov && !ov->user) {
+		mutex_lock(&ov->cbuf_lock);
+		kfree(ov->cbuf);
+		ov->cbuf = NULL;
+		mutex_unlock(&ov->cbuf_lock);
+
+		ov51x_dealloc(ov);
+		kfree(ov);
+		ov = NULL;
+	}
+
+	PDEBUG(3, "Disconnect complete");
+}
+
+static struct usb_driver ov511_driver = {
+	.name =		"ov511",
+	.id_table =	device_table,
+	.probe =	ov51x_probe,
+	.disconnect =	ov51x_disconnect
+};
+
+/****************************************************************************
+ *
+ *  Module routines
+ *
+ ***************************************************************************/
+
+static int __init
+usb_ov511_init(void)
+{
+	int retval;
+
+	retval = usb_register(&ov511_driver);
+	if (retval)
+		goto out;
+
+	info(DRIVER_VERSION " : " DRIVER_DESC);
+
+out:
+	return retval;
+}
+
+static void __exit
+usb_ov511_exit(void)
+{
+	usb_deregister(&ov511_driver);
+	info("driver deregistered");
+
+}
+
+module_init(usb_ov511_init);
+module_exit(usb_ov511_exit);
+
diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h
new file mode 100644
index 000000000000..12b3d51e1c34
--- /dev/null
+++ b/drivers/media/video/ov511.h
@@ -0,0 +1,568 @@
+#ifndef __LINUX_OV511_H
+#define __LINUX_OV511_H
+
+#include <asm/uaccess.h>
+#include <linux/videodev.h>
+#include <linux/smp_lock.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+
+#define OV511_DEBUG	/* Turn on debug messages */
+
+#ifdef OV511_DEBUG
+	#define PDEBUG(level, fmt, args...) \
+		if (debug >= (level)) info("[%s:%d] " fmt, \
+		__FUNCTION__, __LINE__ , ## args)
+#else
+	#define PDEBUG(level, fmt, args...) do {} while(0)
+#endif
+
+/* This macro restricts an int variable to an inclusive range */
+#define RESTRICT_TO_RANGE(v,mi,ma) { \
+	if ((v) < (mi)) (v) = (mi); \
+	else if ((v) > (ma)) (v) = (ma); \
+}
+
+/* --------------------------------- */
+/* DEFINES FOR OV511 AND OTHER CHIPS */
+/* --------------------------------- */
+
+/* USB IDs */
+#define VEND_OMNIVISION	0x05A9
+#define PROD_OV511	0x0511
+#define PROD_OV511PLUS	0xA511
+#define PROD_OV518	0x0518
+#define PROD_OV518PLUS	0xA518
+
+#define VEND_MATTEL	0x0813
+#define PROD_ME2CAM	0x0002
+
+/* --------------------------------- */
+/*     OV51x REGISTER MNEMONICS      */
+/* --------------------------------- */
+
+/* Camera interface register numbers */
+#define R511_CAM_DELAY		0x10
+#define R511_CAM_EDGE		0x11
+#define R511_CAM_PXCNT		0x12
+#define R511_CAM_LNCNT		0x13
+#define R511_CAM_PXDIV		0x14
+#define R511_CAM_LNDIV		0x15
+#define R511_CAM_UV_EN		0x16
+#define R511_CAM_LINE_MODE	0x17
+#define R511_CAM_OPTS		0x18
+
+/* Snapshot mode camera interface register numbers */
+#define R511_SNAP_FRAME		0x19
+#define R511_SNAP_PXCNT		0x1A
+#define R511_SNAP_LNCNT		0x1B
+#define R511_SNAP_PXDIV		0x1C
+#define R511_SNAP_LNDIV		0x1D
+#define R511_SNAP_UV_EN		0x1E
+#define R511_SNAP_OPTS		0x1F
+
+/* DRAM register numbers */
+#define R511_DRAM_FLOW_CTL	0x20
+#define R511_DRAM_ARCP		0x21
+#define R511_DRAM_MRC		0x22
+#define R511_DRAM_RFC		0x23
+
+/* ISO FIFO register numbers */
+#define R51x_FIFO_PSIZE		0x30	/* 2 bytes wide w/ OV518(+) */
+#define R511_FIFO_OPTS		0x31
+
+/* Parallel IO register numbers */
+#define R511_PIO_OPTS		0x38
+#define R511_PIO_DATA		0x39
+#define R511_PIO_BIST		0x3E
+#define R518_GPIO_IN		0x55	/* OV518(+) only */
+#define R518_GPIO_OUT		0x56	/* OV518(+) only */
+#define R518_GPIO_CTL		0x57	/* OV518(+) only */
+#define R518_GPIO_PULSE_IN	0x58	/* OV518(+) only */
+#define R518_GPIO_PULSE_CLEAR	0x59	/* OV518(+) only */
+#define R518_GPIO_PULSE_POL	0x5a	/* OV518(+) only */
+#define R518_GPIO_PULSE_EN	0x5b	/* OV518(+) only */
+#define R518_GPIO_RESET		0x5c	/* OV518(+) only */
+
+/* I2C registers */
+#define R511_I2C_CTL		0x40
+#define R518_I2C_CTL		0x47	/* OV518(+) only */
+#define R51x_I2C_W_SID		0x41
+#define R51x_I2C_SADDR_3	0x42
+#define R51x_I2C_SADDR_2	0x43
+#define R51x_I2C_R_SID		0x44
+#define R51x_I2C_DATA		0x45
+#define R51x_I2C_CLOCK		0x46
+#define R51x_I2C_TIMEOUT	0x47
+
+/* I2C snapshot registers */
+#define R511_SI2C_SADDR_3	0x48
+#define R511_SI2C_DATA		0x49
+
+/* System control registers */
+#define R51x_SYS_RESET		0x50
+		/* Reset type definitions */
+#define 	OV511_RESET_UDC		0x01
+#define 	OV511_RESET_I2C		0x02
+#define 	OV511_RESET_FIFO	0x04
+#define 	OV511_RESET_OMNICE	0x08
+#define 	OV511_RESET_DRAM	0x10
+#define 	OV511_RESET_CAM_INT	0x20
+#define 	OV511_RESET_OV511	0x40
+#define 	OV511_RESET_NOREGS	0x3F /* All but OV511 & regs */
+#define 	OV511_RESET_ALL		0x7F
+
+#define R511_SYS_CLOCK_DIV	0x51
+#define R51x_SYS_SNAP		0x52
+#define R51x_SYS_INIT         	0x53
+#define R511_SYS_PWR_CLK	0x54 /* OV511+/OV518(+) only */
+#define R511_SYS_LED_CTL	0x55 /* OV511+ only */
+#define R511_SYS_USER		0x5E
+#define R511_SYS_CUST_ID	0x5F
+
+/* OmniCE (compression) registers */
+#define R511_COMP_PHY		0x70
+#define R511_COMP_PHUV		0x71
+#define R511_COMP_PVY		0x72
+#define R511_COMP_PVUV		0x73
+#define R511_COMP_QHY		0x74
+#define R511_COMP_QHUV		0x75
+#define R511_COMP_QVY		0x76
+#define R511_COMP_QVUV		0x77
+#define R511_COMP_EN		0x78
+#define R511_COMP_LUT_EN	0x79
+#define R511_COMP_LUT_BEGIN	0x80
+
+/* --------------------------------- */
+/*         ALTERNATE NUMBERS         */
+/* --------------------------------- */
+
+/* Alternate numbers for various max packet sizes (OV511 only) */
+#define OV511_ALT_SIZE_992	0
+#define OV511_ALT_SIZE_993	1
+#define OV511_ALT_SIZE_768	2
+#define OV511_ALT_SIZE_769	3
+#define OV511_ALT_SIZE_512	4
+#define OV511_ALT_SIZE_513	5
+#define OV511_ALT_SIZE_257	6
+#define OV511_ALT_SIZE_0	7
+
+/* Alternate numbers for various max packet sizes (OV511+ only) */
+#define OV511PLUS_ALT_SIZE_0	0
+#define OV511PLUS_ALT_SIZE_33	1
+#define OV511PLUS_ALT_SIZE_129	2
+#define OV511PLUS_ALT_SIZE_257	3
+#define OV511PLUS_ALT_SIZE_385	4
+#define OV511PLUS_ALT_SIZE_513	5
+#define OV511PLUS_ALT_SIZE_769	6
+#define OV511PLUS_ALT_SIZE_961	7
+
+/* Alternate numbers for various max packet sizes (OV518(+) only) */
+#define OV518_ALT_SIZE_0	0
+#define OV518_ALT_SIZE_128	1
+#define OV518_ALT_SIZE_256	2
+#define OV518_ALT_SIZE_384	3
+#define OV518_ALT_SIZE_512	4
+#define OV518_ALT_SIZE_640	5
+#define OV518_ALT_SIZE_768	6
+#define OV518_ALT_SIZE_896	7
+
+/* --------------------------------- */
+/*     OV7610 REGISTER MNEMONICS     */
+/* --------------------------------- */
+
+/* OV7610 registers */
+#define OV7610_REG_GAIN          0x00	/* gain setting (5:0) */
+#define OV7610_REG_BLUE          0x01	/* blue channel balance */
+#define OV7610_REG_RED           0x02	/* red channel balance */
+#define OV7610_REG_SAT           0x03	/* saturation */
+					/* 04 reserved */
+#define OV7610_REG_CNT           0x05	/* Y contrast */
+#define OV7610_REG_BRT           0x06	/* Y brightness */
+					/* 08-0b reserved */
+#define OV7610_REG_BLUE_BIAS     0x0C	/* blue channel bias (5:0) */
+#define OV7610_REG_RED_BIAS      0x0D	/* read channel bias (5:0) */
+#define OV7610_REG_GAMMA_COEFF   0x0E	/* gamma settings */
+#define OV7610_REG_WB_RANGE      0x0F	/* AEC/ALC/S-AWB settings */
+#define OV7610_REG_EXP           0x10	/* manual exposure setting */
+#define OV7610_REG_CLOCK         0x11	/* polarity/clock prescaler */
+#define OV7610_REG_COM_A         0x12	/* misc common regs */
+#define OV7610_REG_COM_B         0x13	/* misc common regs */
+#define OV7610_REG_COM_C         0x14	/* misc common regs */
+#define OV7610_REG_COM_D         0x15	/* misc common regs */
+#define OV7610_REG_FIELD_DIVIDE  0x16	/* field interval/mode settings */
+#define OV7610_REG_HWIN_START    0x17	/* horizontal window start */
+#define OV7610_REG_HWIN_END      0x18	/* horizontal window end */
+#define OV7610_REG_VWIN_START    0x19	/* vertical window start */
+#define OV7610_REG_VWIN_END      0x1A	/* vertical window end */
+#define OV7610_REG_PIXEL_SHIFT   0x1B	/* pixel shift */
+#define OV7610_REG_ID_HIGH       0x1C	/* manufacturer ID MSB */
+#define OV7610_REG_ID_LOW        0x1D	/* manufacturer ID LSB */
+					/* 0e-0f reserved */
+#define OV7610_REG_COM_E         0x20	/* misc common regs */
+#define OV7610_REG_YOFFSET       0x21	/* Y channel offset */
+#define OV7610_REG_UOFFSET       0x22	/* U channel offset */
+					/* 23 reserved */
+#define OV7610_REG_ECW           0x24	/* Exposure white level for AEC */
+#define OV7610_REG_ECB           0x25	/* Exposure black level for AEC */
+#define OV7610_REG_COM_F         0x26	/* misc settings */
+#define OV7610_REG_COM_G         0x27	/* misc settings */
+#define OV7610_REG_COM_H         0x28	/* misc settings */
+#define OV7610_REG_COM_I         0x29	/* misc settings */
+#define OV7610_REG_FRAMERATE_H   0x2A	/* frame rate MSB + misc */
+#define OV7610_REG_FRAMERATE_L   0x2B	/* frame rate LSB */
+#define OV7610_REG_ALC           0x2C	/* Auto Level Control settings */
+#define OV7610_REG_COM_J         0x2D	/* misc settings */
+#define OV7610_REG_VOFFSET       0x2E	/* V channel offset adjustment */
+#define OV7610_REG_ARRAY_BIAS	 0x2F	/* Array bias -- don't change */
+					/* 30-32 reserved */
+#define OV7610_REG_YGAMMA        0x33	/* misc gamma settings (7:6) */
+#define OV7610_REG_BIAS_ADJUST   0x34	/* misc bias settings */
+#define OV7610_REG_COM_L         0x35	/* misc settings */
+					/* 36-37 reserved */
+#define OV7610_REG_COM_K         0x38	/* misc registers */
+
+/* --------------------------------- */
+/*           I2C ADDRESSES           */
+/* --------------------------------- */
+
+#define OV7xx0_SID   0x42
+#define OV6xx0_SID   0xC0
+#define OV8xx0_SID   0xA0
+#define KS0127_SID   0xD8
+#define SAA7111A_SID 0x48
+
+/* --------------------------------- */
+/*       MISCELLANEOUS DEFINES       */
+/* --------------------------------- */
+
+#define I2C_CLOCK_PRESCALER 	0x03
+
+#define FRAMES_PER_DESC		10	/* FIXME - What should this be? */
+#define MAX_FRAME_SIZE_PER_DESC	993	/* For statically allocated stuff */
+#define PIXELS_PER_SEG		256	/* Pixels per segment */
+
+#define OV511_ENDPOINT_ADDRESS	1	/* Isoc endpoint number */
+
+#define OV511_NUMFRAMES	2
+#if OV511_NUMFRAMES > VIDEO_MAX_FRAME
+	#error "OV511_NUMFRAMES is too high"
+#endif
+
+#define OV511_NUMSBUF		2
+
+/* Control transfers use up to 4 bytes */
+#define OV511_CBUF_SIZE		4
+
+/* Size of usb_make_path() buffer */
+#define OV511_USB_PATH_LEN	64
+
+/* Bridge types */
+enum {
+	BRG_UNKNOWN,
+	BRG_OV511,
+	BRG_OV511PLUS,
+	BRG_OV518,
+	BRG_OV518PLUS,
+};
+
+/* Bridge classes */
+enum {
+	BCL_UNKNOWN,
+	BCL_OV511,
+	BCL_OV518,
+};
+
+/* Sensor types */
+enum {
+	SEN_UNKNOWN,
+	SEN_OV76BE,
+	SEN_OV7610,
+	SEN_OV7620,
+	SEN_OV7620AE,
+	SEN_OV6620,
+	SEN_OV6630,
+	SEN_OV6630AE,
+	SEN_OV6630AF,
+	SEN_OV8600,
+	SEN_KS0127,
+	SEN_KS0127B,
+	SEN_SAA7111A,
+};
+
+enum {
+	STATE_SCANNING,		/* Scanning for start */
+	STATE_HEADER,		/* Parsing header */
+	STATE_LINES,		/* Parsing lines */
+};
+
+/* Buffer states */
+enum {
+	BUF_NOT_ALLOCATED,
+	BUF_ALLOCATED,
+};
+
+/* --------- Definition of ioctl interface --------- */
+
+#define OV511_INTERFACE_VER 101
+
+/* LED options */
+enum {
+	LED_OFF,
+	LED_ON,
+	LED_AUTO,
+};
+
+/* Raw frame formats */
+enum {
+	RAWFMT_INVALID,
+	RAWFMT_YUV400,
+	RAWFMT_YUV420,
+	RAWFMT_YUV422,
+	RAWFMT_GBR422,
+};
+
+struct ov511_i2c_struct {
+	unsigned char slave; /* Write slave ID (read ID - 1) */
+	unsigned char reg;   /* Index of register */
+	unsigned char value; /* User sets this w/ write, driver does w/ read */
+	unsigned char mask;  /* Bits to be changed. Not used with read ops */
+};
+
+/* ioctls */
+#define OV511IOC_WI2C     _IOW('v', BASE_VIDIOCPRIVATE + 5, \
+			       struct ov511_i2c_struct)
+#define OV511IOC_RI2C    _IOWR('v', BASE_VIDIOCPRIVATE + 6, \
+			       struct ov511_i2c_struct)
+/* ------------- End IOCTL interface -------------- */
+
+struct usb_ov511;		/* Forward declaration */
+
+struct ov511_sbuf {
+	struct usb_ov511 *ov;
+	unsigned char *data;
+	struct urb *urb;
+	spinlock_t lock;
+	int n;
+};
+
+enum {
+	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
+	FRAME_READY,		/* Ready to start grabbing */
+	FRAME_GRABBING,		/* In the process of being grabbed into */
+	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
+	FRAME_ERROR,		/* Something bad happened while processing */
+};
+
+struct ov511_regvals {
+	enum {
+		OV511_DONE_BUS,
+		OV511_REG_BUS,
+		OV511_I2C_BUS,
+	} bus;
+	unsigned char reg;
+	unsigned char val;
+};
+
+struct ov511_frame {
+	int framenum;		/* Index of this frame */
+	unsigned char *data;	/* Frame buffer */
+	unsigned char *tempdata; /* Temp buffer for multi-stage conversions */
+	unsigned char *rawdata;	/* Raw camera data buffer */
+	unsigned char *compbuf;	/* Temp buffer for decompressor */
+
+	int depth;		/* Bytes per pixel */
+	int width;		/* Width application is expecting */
+	int height;		/* Height application is expecting */
+
+	int rawwidth;		/* Actual width of frame sent from camera */
+	int rawheight;		/* Actual height of frame sent from camera */
+
+	int sub_flag;		/* Sub-capture mode for this frame? */
+	unsigned int format;	/* Format for this frame */
+	int compressed;		/* Is frame compressed? */
+
+	volatile int grabstate;	/* State of grabbing */
+	int scanstate;		/* State of scanning */
+
+	int bytes_recvd;	/* Number of image bytes received from camera */
+
+	long bytes_read;	/* Amount that has been read() */
+
+	wait_queue_head_t wq;	/* Processes waiting */
+
+	int snapshot;		/* True if frame was a snapshot */
+};
+
+#define DECOMP_INTERFACE_VER 4
+
+/* Compression module operations */
+struct ov51x_decomp_ops {
+	int (*decomp_400)(unsigned char *, unsigned char *, unsigned char *,
+			  int, int, int);
+	int (*decomp_420)(unsigned char *, unsigned char *, unsigned char *,
+			  int, int, int);
+	int (*decomp_422)(unsigned char *, unsigned char *, unsigned char *,
+			  int, int, int);
+	struct module *owner;
+};
+
+struct usb_ov511 {
+	struct video_device *vdev;
+	struct usb_device *dev;
+
+	int customid;
+	char *desc;
+	unsigned char iface;
+	char usb_path[OV511_USB_PATH_LEN];
+
+	/* Determined by sensor type */
+	int maxwidth;
+	int maxheight;
+	int minwidth;
+	int minheight;
+
+	int brightness;
+	int colour;
+	int contrast;
+	int hue;
+	int whiteness;
+	int exposure;
+	int auto_brt;		/* Auto brightness enabled flag */
+	int auto_gain;		/* Auto gain control enabled flag */
+	int auto_exp;		/* Auto exposure enabled flag */
+	int backlight;		/* Backlight exposure algorithm flag */
+	int mirror;		/* Image is reversed horizontally */
+
+	int led_policy;		/* LED: off|on|auto; OV511+ only */
+
+	struct mutex lock;	/* Serializes user-accessible operations */
+	int user;		/* user count for exclusive use */
+
+	int streaming;		/* Are we streaming Isochronous? */
+	int grabbing;		/* Are we grabbing? */
+
+	int compress;		/* Should the next frame be compressed? */
+	int compress_inited;	/* Are compression params uploaded? */
+
+	int lightfreq;		/* Power (lighting) frequency */
+	int bandfilt;		/* Banding filter enabled flag */
+
+	unsigned char *fbuf;	/* Videodev buffer area */
+	unsigned char *tempfbuf; /* Temporary (intermediate) buffer area */
+	unsigned char *rawfbuf;	/* Raw camera data buffer area */
+
+	int sub_flag;		/* Pix Array subcapture on flag */
+	int subx;		/* Pix Array subcapture x offset */
+	int suby;		/* Pix Array subcapture y offset */
+	int subw;		/* Pix Array subcapture width */
+	int subh;		/* Pix Array subcapture height */
+
+	int curframe;		/* Current receiving sbuf */
+	struct ov511_frame frame[OV511_NUMFRAMES];
+
+	struct ov511_sbuf sbuf[OV511_NUMSBUF];
+
+	wait_queue_head_t wq;	/* Processes waiting */
+
+	int snap_enabled;	/* Snapshot mode enabled */
+
+	int bridge;		/* Type of bridge (BRG_*) */
+	int bclass;		/* Class of bridge (BCL_*) */
+	int sensor;		/* Type of image sensor chip (SEN_*) */
+
+	int packet_size;	/* Frame size per isoc desc */
+	int packet_numbering;	/* Is ISO frame numbering enabled? */
+
+	/* Framebuffer/sbuf management */
+	int buf_state;
+	struct mutex buf_lock;
+
+	struct ov51x_decomp_ops *decomp_ops;
+
+	/* Stop streaming while changing picture settings */
+	int stop_during_set;
+
+	int stopped;		/* Streaming is temporarily paused */
+
+	/* Video decoder stuff */
+	int input;		/* Composite, S-VIDEO, etc... */
+	int num_inputs;		/* Number of inputs */
+	int norm; 		/* NTSC / PAL / SECAM */
+	int has_decoder;	/* Device has a video decoder */
+	int pal;		/* Device is designed for PAL resolution */
+
+	/* I2C interface */
+	struct mutex i2c_lock;	  /* Protect I2C controller regs */
+	unsigned char primary_i2c_slave;  /* I2C write id of sensor */
+
+	/* Control transaction stuff */
+	unsigned char *cbuf;		/* Buffer for payload */
+	struct mutex cbuf_lock;
+};
+
+/* Used to represent a list of values and their respective symbolic names */
+struct symbolic_list {
+	int num;
+	char *name;
+};
+
+#define NOT_DEFINED_STR "Unknown"
+
+/* Returns the name of the matching element in the symbolic_list array. The
+ * end of the list must be marked with an element that has a NULL name.
+ */
+static inline char *
+symbolic(struct symbolic_list list[], int num)
+{
+	int i;
+
+	for (i = 0; list[i].name != NULL; i++)
+			if (list[i].num == num)
+				return (list[i].name);
+
+	return (NOT_DEFINED_STR);
+}
+
+/* Compression stuff */
+
+#define OV511_QUANTABLESIZE	64
+#define OV518_QUANTABLESIZE	32
+
+#define OV511_YQUANTABLE { \
+	0, 1, 1, 2, 2, 3, 3, 4, \
+	1, 1, 1, 2, 2, 3, 4, 4, \
+	1, 1, 2, 2, 3, 4, 4, 4, \
+	2, 2, 2, 3, 4, 4, 4, 4, \
+	2, 2, 3, 4, 4, 5, 5, 5, \
+	3, 3, 4, 4, 5, 5, 5, 5, \
+	3, 4, 4, 4, 5, 5, 5, 5, \
+	4, 4, 4, 4, 5, 5, 5, 5  \
+}
+
+#define OV511_UVQUANTABLE { \
+	0, 2, 2, 3, 4, 4, 4, 4, \
+	2, 2, 2, 4, 4, 4, 4, 4, \
+	2, 2, 3, 4, 4, 4, 4, 4, \
+	3, 4, 4, 4, 4, 4, 4, 4, \
+	4, 4, 4, 4, 4, 4, 4, 4, \
+	4, 4, 4, 4, 4, 4, 4, 4, \
+	4, 4, 4, 4, 4, 4, 4, 4, \
+	4, 4, 4, 4, 4, 4, 4, 4  \
+}
+
+#define OV518_YQUANTABLE { \
+	5, 4, 5, 6, 6, 7, 7, 7, \
+	5, 5, 5, 5, 6, 7, 7, 7, \
+	6, 6, 6, 6, 7, 7, 7, 8, \
+	7, 7, 6, 7, 7, 7, 8, 8  \
+}
+
+#define OV518_UVQUANTABLE { \
+	6, 6, 6, 7, 7, 7, 7, 7, \
+	6, 6, 6, 7, 7, 7, 7, 7, \
+	6, 6, 6, 7, 7, 7, 7, 8, \
+	7, 7, 7, 7, 7, 7, 8, 8  \
+}
+
+#endif
diff --git a/drivers/media/video/ovcamchip/Makefile b/drivers/media/video/ovcamchip/Makefile
index bca41ad93de8..cba4cdf20f49 100644
--- a/drivers/media/video/ovcamchip/Makefile
+++ b/drivers/media/video/ovcamchip/Makefile
@@ -1,4 +1,4 @@
 ovcamchip-objs     := ovcamchip_core.o ov6x20.o ov6x30.o ov7x10.o ov7x20.o \
-                      ov76be.o
+		      ov76be.o
 
 obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip.o
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
index e76b53d5909c..3fe9fa04cd84 100644
--- a/drivers/media/video/ovcamchip/ovcamchip_core.c
+++ b/drivers/media/video/ovcamchip/ovcamchip_core.c
@@ -266,17 +266,17 @@ static int ovcamchip_detect(struct i2c_client *c)
 		PDEBUG(3, "Testing for 0V6xx0");
 		c->addr = OV6xx0_SID;
 		if (init_camchip(c) < 0) {
- 			return -ENODEV;
+			return -ENODEV;
 		} else {
 			if (ov6xx0_detect(c) < 0) {
 				PERROR("Failed to init OV6xx0");
- 				return -EIO;
+				return -EIO;
 			}
 		}
 	} else {
 		if (ov7xx0_detect(c) < 0) {
 			PERROR("Failed to init OV7xx0");
- 			return -EIO;
+			return -EIO;
 		}
 	}
 
diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h
index 575e612a5546..1231335a9f4a 100644
--- a/drivers/media/video/ovcamchip/ovcamchip_priv.h
+++ b/drivers/media/video/ovcamchip/ovcamchip_priv.h
@@ -82,6 +82,6 @@ extern int ov_write_regvals(struct i2c_client *c,
 			    struct ovcamchip_regvals *rvals);
 
 extern int ov_write_mask(struct i2c_client *c, unsigned char reg,
-	      		 unsigned char value, unsigned char mask);
+			 unsigned char value, unsigned char mask);
 
 #endif
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
index 15fd85acabda..522e9ddeb089 100644
--- a/drivers/media/video/planb.c
+++ b/drivers/media/video/planb.c
@@ -1,4 +1,4 @@
-/* 
+/*
     planb - PlanB frame grabber driver
 
     PlanB is used in the 7x00/8x00 series of PowerMacintosh
@@ -584,7 +584,7 @@ finish:
 	wake_up_interruptible(&pb->suspendq);
 }
 
-static void add_clip(struct planb *pb, struct video_clip *clip) 
+static void add_clip(struct planb *pb, struct video_clip *clip)
 {
 	volatile unsigned char	*base;
 	int	xc = clip->x, yc = clip->y;
@@ -758,7 +758,7 @@ static void cmd_buff(struct planb *pb)
 							PLANB_SET(CH_SYNC));
 	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
 							PLANB_SET(DMA_ABORT));
-	
+
 	/* odd field data: */
 	jump = virt_to_bus(c1 + nlines / 2);
 	for (i=1; i < nlines; i += stepsize, c1++)
@@ -1247,7 +1247,7 @@ static volatile struct dbdma_cmd *setup_grab_cmd(int fr, struct planb *pb)
 	tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
 	tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
 		PLANB_SET(DMA_ABORT));
-	
+
 	/* odd field data: */
 	jump_addr = c1 + TAB_FACTOR * nlines / 2;
 	jump = virt_to_bus(jump_addr);
@@ -1383,7 +1383,7 @@ static int planb_open(struct video_device *dev, int mode)
 	pb->user++;
 
 	DEBUG("PlanB: device opened\n");
-	return 0;   
+	return 0;
 }
 
 static void planb_close(struct video_device *dev)
@@ -1424,9 +1424,9 @@ static long planb_write(struct video_device *v, const char *buf,
 static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 {
 	struct planb *pb=(struct planb *)dev;
-  	
+
 	switch (cmd)
-	{	
+	{
 		case VIDIOCGCAP:
 		{
 			struct video_capability b;
@@ -1440,26 +1440,26 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 			b.channels = 2;	/* composite & svhs */
 			b.audios = 0;
 			b.maxwidth = PLANB_MAXPIXELS;
-                        b.maxheight = PLANB_MAXLINES;
-                        b.minwidth = 32; /* wild guess */
-                        b.minheight = 32;
-                        if (copy_to_user(arg,&b,sizeof(b)))
-                                return -EFAULT;
+			b.maxheight = PLANB_MAXLINES;
+			b.minwidth = 32; /* wild guess */
+			b.minheight = 32;
+			if (copy_to_user(arg,&b,sizeof(b)))
+				return -EFAULT;
 			return 0;
 		}
 		case VIDIOCSFBUF:
 		{
-                        struct video_buffer v;
+			struct video_buffer v;
 			unsigned short bpp;
 			unsigned int fmt;
 
 			DEBUG("PlanB: IOCTL VIDIOCSFBUF\n");
 
-                        if (!capable(CAP_SYS_ADMIN)
+			if (!capable(CAP_SYS_ADMIN)
 			|| !capable(CAP_SYS_RAWIO))
-                                return -EPERM;
-                        if (copy_from_user(&v, arg,sizeof(v)))
-                                return -EFAULT;
+				return -EPERM;
+			if (copy_from_user(&v, arg,sizeof(v)))
+				return -EFAULT;
 			planb_lock(pb);
 			switch(v.depth) {
 			case 8:
@@ -1478,7 +1478,7 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 				break;
 			default:
 				planb_unlock(pb);
-                                return -EINVAL;
+				return -EINVAL;
 			}
 			if (bpp * v.width > v.bytesperline) {
 				planb_unlock(pb);
@@ -1493,7 +1493,7 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 			pb->win.bpl = pb->win.bpp * pb->win.swidth;
 			pb->win.pad = v.bytesperline - pb->win.bpl;
 
-                        DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d,"
+			DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d,"
 				" bpl %d (+ %d)\n", v.base, v.width,v.height,
 				pb->win.bpp, pb->win.bpl, pb->win.pad);
 
@@ -1504,11 +1504,11 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 				resume_overlay(pb);
 			}
 			planb_unlock(pb);
-			return 0;		
+			return 0;
 		}
 		case VIDIOCGFBUF:
 		{
-                        struct video_buffer v;
+			struct video_buffer v;
 
 			DEBUG("PlanB: IOCTL VIDIOCGFBUF\n");
 
@@ -1518,15 +1518,15 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 			v.depth = pb->win.depth;
 			v.bytesperline = pb->win.bpl + pb->win.pad;
 			if (copy_to_user(arg, &v, sizeof(v)))
-                                return -EFAULT;
+				return -EFAULT;
 			return 0;
 		}
 		case VIDIOCCAPTURE:
 		{
 			int i;
 
-                        if(copy_from_user(&i, arg, sizeof(i)))
-                                return -EFAULT;
+			if(copy_from_user(&i, arg, sizeof(i)))
+				return -EFAULT;
 			if(i==0) {
 				DEBUG("PlanB: IOCTL VIDIOCCAPTURE Stop\n");
 
@@ -1695,7 +1695,7 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 			struct video_window	vw;
 			struct video_clip	clip;
 			int 			i;
-			
+
 			DEBUG("PlanB: IOCTL VIDIOCSWIN\n");
 
 			if(copy_from_user(&vw,arg,sizeof(vw)))
@@ -1749,7 +1749,7 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 				return -EFAULT;
 			return 0;
 		}
-	        case VIDIOCSYNC: {
+		case VIDIOCSYNC: {
 			int i;
 
 			IDEBUG("PlanB: IOCTL VIDIOCSYNC\n");
@@ -1759,42 +1759,42 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 
 			IDEBUG("PlanB: sync to frame %d\n", i);
 
-                        if(i > (MAX_GBUFFERS - 1) || i < 0)
-                                return -EINVAL;
+			if(i > (MAX_GBUFFERS - 1) || i < 0)
+				return -EINVAL;
 chk_grab:
-                        switch (pb->frame_stat[i]) {
-                        case GBUFFER_UNUSED:
-                                return -EINVAL;
+			switch (pb->frame_stat[i]) {
+			case GBUFFER_UNUSED:
+				return -EINVAL;
 			case GBUFFER_GRABBING:
 				IDEBUG("PlanB: waiting for grab"
 							" done (%d)\n", i);
- 			        interruptible_sleep_on(&pb->capq);
+				interruptible_sleep_on(&pb->capq);
 				if(signal_pending(current))
 					return -EINTR;
 				goto chk_grab;
-                        case GBUFFER_DONE:
-                                pb->frame_stat[i] = GBUFFER_UNUSED;
-                                break;
-                        }
-                        return 0;
+			case GBUFFER_DONE:
+				pb->frame_stat[i] = GBUFFER_UNUSED;
+				break;
+			}
+			return 0;
 		}
 
-	        case VIDIOCMCAPTURE:
+		case VIDIOCMCAPTURE:
 		{
-                        struct video_mmap vm;
+			struct video_mmap vm;
 			volatile unsigned int status;
 
 			IDEBUG("PlanB: IOCTL VIDIOCMCAPTURE\n");
 
 			if(copy_from_user((void *) &vm,(void *)arg,sizeof(vm)))
 				return -EFAULT;
-                        status = pb->frame_stat[vm.frame];
-                        if (status != GBUFFER_UNUSED)
-                                return -EBUSY;
+			status = pb->frame_stat[vm.frame];
+			if (status != GBUFFER_UNUSED)
+				return -EBUSY;
 
-		        return vgrab(pb, &vm);
+			return vgrab(pb, &vm);
 		}
-		
+
 		case VIDIOCGMBUF:
 		{
 			int i;
@@ -1811,7 +1811,7 @@ chk_grab:
 				return -EFAULT;
 			return 0;
 		}
-		
+
 		case PLANBIOCGSAAREGS:
 		{
 			struct planb_saa_regs preg;
@@ -1828,7 +1828,7 @@ chk_grab:
 				return -EFAULT;
 			return 0;
 		}
-		
+
 		case PLANBIOCSSAAREGS:
 		{
 			struct planb_saa_regs preg;
@@ -1842,7 +1842,7 @@ chk_grab:
 			saa_set (preg.addr, preg.val, pb);
 			return 0;
 		}
-		
+
 		case PLANBIOCGSTAT:
 		{
 			struct planb_stat_regs pstat;
@@ -1859,7 +1859,7 @@ chk_grab:
 				return -EFAULT;
 			return 0;
 		}
-		
+
 		case PLANBIOCSMODE: {
 			int v;
 
@@ -1985,10 +1985,10 @@ static int planb_mmap(struct vm_area_struct *vma, struct video_device *dev, cons
 {
 	int i;
 	struct planb *pb = (struct planb *)dev;
-        unsigned long start = (unsigned long)adr;
+	unsigned long start = (unsigned long)adr;
 
 	if (size > MAX_GBUFFERS * PLANB_MAX_FBUF)
-	        return -EINVAL;
+		return -EINVAL;
 	if (!pb->rawbuf) {
 		int err;
 		if((err=grabbuf_alloc(pb)))
@@ -2091,10 +2091,10 @@ static int init_planb(struct planb *pb)
 	/* clear interrupt mask */
 	pb->intr_mask = PLANB_CLR_IRQ;
 
-        result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb);
-        if (result < 0) {
-	        if (result==-EINVAL)
-	                printk(KERN_ERR "PlanB: Bad irq number (%d) "
+	result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb);
+	if (result < 0) {
+		if (result==-EINVAL)
+			printk(KERN_ERR "PlanB: Bad irq number (%d) "
 						"or handler\n", (int)pb->irq);
 		else if (result==-EBUSY)
 			printk(KERN_ERR "PlanB: I don't know why, "
@@ -2102,7 +2102,7 @@ static int init_planb(struct planb *pb)
 		return result;
 	}
 	disable_irq(pb->irq);
-        
+
 	/* Now add the template and register the device unit. */
 	memcpy(&pb->video_dev,&planb_template,sizeof(planb_template));
 
@@ -2143,7 +2143,7 @@ static int init_planb(struct planb *pb)
 }
 
 /*
- *	Scan for a PlanB controller, request the irq and map the io memory 
+ *	Scan for a PlanB controller, request the irq and map the io memory
  */
 
 static int find_planb(void)
@@ -2171,9 +2171,9 @@ static int find_planb(void)
 	pb = &planbs[0];
 	planb_num = 1;
 
-        if (planb_devices->n_addrs != 1) {
-                printk (KERN_WARNING "PlanB: expecting 1 address for planb "
-                	"(got %d)", planb_devices->n_addrs);
+	if (planb_devices->n_addrs != 1) {
+		printk (KERN_WARNING "PlanB: expecting 1 address for planb "
+			"(got %d)", planb_devices->n_addrs);
 		return 0;
 	}
 
@@ -2236,7 +2236,7 @@ static int find_planb(void)
 	pb->planb_base = planb_regs;
 	pb->planb_base_phys = (struct planb_registers *)new_base;
 	pb->irq	= irq;
-	
+
 	return planb_num;
 
 err_out_disable:
@@ -2251,7 +2251,7 @@ static void release_planb(void)
 	int i;
 	struct planb *pb;
 
-	for (i=0;i<planb_num; i++) 
+	for (i=0;i<planb_num; i++)
 	{
 		pb=&planbs[i];
 
@@ -2278,7 +2278,7 @@ static void release_planb(void)
 static int __init init_planbs(void)
 {
 	int i;
-  
+
 	if (find_planb()<=0)
 		return -EIO;
 
@@ -2288,9 +2288,9 @@ static int __init init_planbs(void)
 							" with v4l\n", i);
 			release_planb();
 			return -EIO;
-		} 
+		}
 		printk(KERN_INFO "PlanB: registered device %d with v4l\n", i);
-	}  
+	}
 	return 0;
 }
 
diff --git a/drivers/media/video/planb.h b/drivers/media/video/planb.h
index 79b6b561426e..92823211d0c5 100644
--- a/drivers/media/video/planb.h
+++ b/drivers/media/video/planb.h
@@ -1,4 +1,4 @@
-/* 
+/*
     planb - PlanB frame grabber driver
 
     PlanB is used in the 7x00/8x00 series of PowerMacintosh
@@ -167,7 +167,7 @@ struct planb {
 	struct	video_device video_dev;
 	struct	video_picture picture;		/* Current picture params */
 	struct	video_audio audio_dev;		/* Current audio params */
-  
+
 	volatile struct planb_registers *planb_base;	/* virt base of planb */
 	struct planb_registers *planb_base_phys;	/* phys base of planb */
 	void	*priv_space;			/* Org. alloc. mem for kfree */
@@ -209,7 +209,7 @@ struct planb {
 	int gwidth[MAX_GBUFFERS], gheight[MAX_GBUFFERS];
 	unsigned int gfmt[MAX_GBUFFERS];
 	int gnorm_switch[MAX_GBUFFERS];
-        volatile unsigned int *frame_stat;
+	volatile unsigned int *frame_stat;
 #define GBUFFER_UNUSED       0x00U
 #define GBUFFER_GRABBING     0x01U
 #define GBUFFER_DONE         0x02U
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 05ca55939e77..09835ca098b1 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -12,10 +12,10 @@
  *	Most of this code is directly derived from his userspace driver.
  *	His driver works so send any reports to alan@redhat.com unless the
  *	userspace driver also doesn't work for you...
- *      
+ *
  *      Changes:
  *      08/07/2003        Daniele Bellucci <bellucda@tiscali.it>
- *                        - pms_capture: report back -EFAULT 
+ *                        - pms_capture: report back -EFAULT
  */
 
 #include <linux/module.h>
@@ -66,14 +66,14 @@ static int standard 		= 0;	/* 0 - auto 1 - ntsc 2 - pal 3 - secam */
 /*
  *	I/O ports and Shared Memory
  */
- 
+
 static int io_port		=	0x250;
 static int data_port		=	0x251;
 static int mem_base		=	0xC8000;
 static void __iomem *mem;
 static int video_nr             =       -1;
 
-	
+
 
 static inline void mvv_write(u8 index, u8 value)
 {
@@ -90,9 +90,9 @@ static int pms_i2c_stat(u8 slave)
 {
 	int counter;
 	int i;
-	
+
 	outb(0x28, io_port);
-	
+
 	counter=0;
 	while((inb(data_port)&0x01)==0)
 		if(counter++==256)
@@ -101,9 +101,9 @@ static int pms_i2c_stat(u8 slave)
 	while((inb(data_port)&0x01)!=0)
 		if(counter++==256)
 			break;
-			
+
 	outb(slave, io_port);
-	
+
 	counter=0;
 	while((inb(data_port)&0x01)==0)
 		if(counter++==256)
@@ -112,7 +112,7 @@ static int pms_i2c_stat(u8 slave)
 	while((inb(data_port)&0x01)!=0)
 		if(counter++==256)
 			break;
-			
+
 	for(i=0;i<12;i++)
 	{
 		char st=inb(data_port);
@@ -122,7 +122,7 @@ static int pms_i2c_stat(u8 slave)
 			break;
 	}
 	outb(0x29, io_port);
-	return inb(data_port);		
+	return inb(data_port);
 }
 
 static int pms_i2c_write(u16 slave, u16 sub, u16 data)
@@ -130,19 +130,19 @@ static int pms_i2c_write(u16 slave, u16 sub, u16 data)
 	int skip=0;
 	int count;
 	int i;
-	
+
 	for(i=0;i<i2c_count;i++)
 	{
 		if((i2cinfo[i].slave==slave) &&
 		   (i2cinfo[i].sub == sub))
 		{
-		   	if(i2cinfo[i].data==data)
-		   		skip=1;
-		   	i2cinfo[i].data=data;
-		   	i=i2c_count+1;
+			if(i2cinfo[i].data==data)
+				skip=1;
+			i2cinfo[i].data=data;
+			i=i2c_count+1;
 		}
 	}
-	
+
 	if(i==i2c_count && i2c_count<64)
 	{
 		i2cinfo[i2c_count].slave=slave;
@@ -150,16 +150,16 @@ static int pms_i2c_write(u16 slave, u16 sub, u16 data)
 		i2cinfo[i2c_count].data=data;
 		i2c_count++;
 	}
-	
+
 	if(skip)
 		return 0;
-		
+
 	mvv_write(0x29, sub);
 	mvv_write(0x2A, data);
 	mvv_write(0x28, slave);
-	
+
 	outb(0x28, io_port);
-	
+
 	count=0;
 	while((inb(data_port)&1)==0)
 		if(count>255)
@@ -167,9 +167,9 @@ static int pms_i2c_write(u16 slave, u16 sub, u16 data)
 	while((inb(data_port)&1)!=0)
 		if(count>255)
 			break;
-			
+
 	count=inb(data_port);
-	
+
 	if(count&2)
 		return -1;
 	return count;
@@ -189,8 +189,8 @@ static int pms_i2c_read(int slave, int sub)
 
 static void pms_i2c_andor(int slave, int sub, int and, int or)
 {
-	u8 tmp;	
-	
+	u8 tmp;
+
 	tmp=pms_i2c_read(slave, sub);
 	tmp = (tmp&and)|or;
 	pms_i2c_write(slave, sub, tmp);
@@ -199,7 +199,7 @@ static void pms_i2c_andor(int slave, int sub, int and, int or)
 /*
  *	Control functions
  */
- 
+
 
 static void pms_videosource(short source)
 {
@@ -234,8 +234,8 @@ static void pms_colour(short colour)
 			break;
 	}
 }
- 
- 
+
+
 static void pms_contrast(short contrast)
 {
 	switch(decoder)
@@ -269,14 +269,14 @@ static void pms_format(short format)
 {
 	int target;
 	standard = format;
-	
+
 	if(decoder==PHILIPS1)
 		target=0x42;
 	else if(decoder==PHILIPS2)
 		target=0x8A;
 	else
 		return;
-				
+
 	switch(format)
 	{
 		case 0:	/* Auto */
@@ -302,7 +302,7 @@ static void pms_format(short format)
 
 /*
  *	These features of the PMS card are not currently exposes. They
- *	could become a private v4l ioctl for PMSCONFIG or somesuch if 
+ *	could become a private v4l ioctl for PMSCONFIG or somesuch if
  *	people need it. We also don't yet use the PMS interrupt.
  */
 
@@ -324,7 +324,7 @@ static void pms_hstart(short start)
 /*
  *	Bandpass filters
  */
- 
+
 static void pms_bandpass(short pass)
 {
 	if(decoder==PHILIPS2)
@@ -493,7 +493,7 @@ static void pms_vert(u8 deciden, u8 decinum)
 /*
  *	Turn 16bit ratios into best small ratio the chipset can grok
  */
- 
+
 static void pms_vertdeci(unsigned short decinum, unsigned short deciden)
 {
 	/* Knock it down by /5 once */
@@ -546,7 +546,7 @@ static void pms_horzdeci(short decinum, short deciden)
 		decinum=512;
 		deciden=640;	/* 768 would be ideal */
 	}
-	
+
 	while(((decinum|deciden)&1)==0)
 	{
 		decinum>>=1;
@@ -559,7 +559,7 @@ static void pms_horzdeci(short decinum, short deciden)
 	}
 	if(deciden==32)
 		deciden--;
-		
+
 	mvv_write(0x24, 0x80|deciden);
 	mvv_write(0x25, decinum);
 }
@@ -567,14 +567,14 @@ static void pms_horzdeci(short decinum, short deciden)
 static void pms_resolution(short width, short height)
 {
 	int fg_height;
-	
+
 	fg_height=height;
 	if(fg_height>280)
 		fg_height=280;
-		
+
 	mvv_write(0x18, fg_height);
 	mvv_write(0x19, fg_height>>8);
-	
+
 	if(standard==1)
 	{
 		mvv_write(0x1A, 0xFC);
@@ -598,7 +598,7 @@ static void pms_resolution(short width, short height)
 	mvv_write(0x42, 0x00);
 	mvv_write(0x43, 0x00);
 	mvv_write(0x44, MVVMEMORYWIDTH);
-	
+
 	mvv_write(0x22, width+8);
 	mvv_write(0x23, (width+8)>> 8);
 
@@ -618,7 +618,7 @@ static void pms_resolution(short width, short height)
 /*
  *	Set Input
  */
- 
+
 static void pms_vcrinput(short input)
 {
 	if(decoder==PHILIPS2)
@@ -643,20 +643,20 @@ static int pms_capture(struct pms_device *dev, char __user *buf, int rgb555, int
 	mvv_write(0x08,r8); /* capture rgb555/565, init DRAM, PC enable */
 
 /*	printf("%d %d %d %d %d %x %x\n",width,height,voff,nom,den,mvv_buf); */
-  
-	for (y = 0; y < dev->height; y++ ) 
+
+	for (y = 0; y < dev->height; y++ )
 	{
 		writeb(0, mem);  /* synchronisiert neue Zeile */
-		
+
 		/*
 		 *	This is in truth a fifo, be very careful as if you
 		 *	forgot this odd things will occur 8)
 		 */
-		 
+
 		memcpy_fromio(tmp, mem, dw+32); /* discard 16 word   */
 		cnt -= dev->height;
-		while (cnt <= 0) 
-		{ 
+		while (cnt <= 0)
+		{
 			/*
 			 *	Don't copy too far
 			 */
@@ -666,7 +666,7 @@ static int pms_capture(struct pms_device *dev, char __user *buf, int rgb555, int
 			cnt += dev->height;
 			if (copy_to_user(buf, tmp+32, dt))
 				return len ? len : -EFAULT;
-			buf += dt;    
+			buf += dt;
 			len += dt;
 		}
 	}
@@ -683,7 +683,7 @@ static int pms_do_ioctl(struct inode *inode, struct file *file,
 {
 	struct video_device *dev = video_devdata(file);
 	struct pms_device *pd=(struct pms_device *)dev;
-	
+
 	switch(cmd)
 	{
 		case VIDIOCGCAP:
@@ -806,7 +806,7 @@ static int pms_do_ioctl(struct inode *inode, struct file *file,
 			    ||(p->palette==VIDEO_PALETTE_RGB555 && p->depth==15)))
 			    	return -EINVAL;
 			pd->picture= *p;
-			
+
 			/*
 			 *	Now load the card.
 			 */
@@ -815,7 +815,7 @@ static int pms_do_ioctl(struct inode *inode, struct file *file,
 			pms_brightness(p->brightness>>8);
 			pms_hue(p->hue>>8);
 			pms_colour(p->colour>>8);
-			pms_contrast(p->contrast>>8);	
+			pms_contrast(p->contrast>>8);
 			mutex_unlock(&pd->lock);
 			return 0;
 		}
@@ -873,7 +873,7 @@ static ssize_t pms_read(struct file *file, char __user *buf,
 	struct video_device *v = video_devdata(file);
 	struct pms_device *pd=(struct pms_device *)v;
 	int len;
-	
+
 	mutex_lock(&pd->lock);
 	len=pms_capture(pd, buf, (pd->picture.depth==16)?0:1,count);
 	mutex_unlock(&pd->lock);
@@ -905,13 +905,13 @@ static struct pms_device pms_device;
 /*
  *	Probe for and initialise the Mediavision PMS
  */
- 
+
 static int init_mediavision(void)
 {
 	int id;
 	int idec, decst;
 	int i;
-		
+
 	unsigned char i2c_defs[]={
 		0x4C,0x30,0x00,0xE8,
 		0xB6,0xE2,0x00,0x00,
@@ -925,7 +925,7 @@ static int init_mediavision(void)
 	mem = ioremap(mem_base, 0x800);
 	if (!mem)
 		return -ENOMEM;
-	
+
 	if (!request_region(0x9A01, 1, "Mediavision PMS config"))
 	{
 		printk(KERN_WARNING "mediavision: unable to detect: 0x9A01 in use.\n");
@@ -941,18 +941,18 @@ static int init_mediavision(void)
 	}
 	outb(0xB8, 0x9A01);		/* Unlock */
 	outb(io_port>>4, 0x9A01);	/* Set IO port */
-	
-	
+
+
 	id=mvv_read(3);
 	decst=pms_i2c_stat(0x43);
-	
+
 	if(decst!=-1)
 		idec=2;
 	else if(pms_i2c_stat(0xb9)!=-1)
 		idec=3;
 	else if(pms_i2c_stat(0x8b)!=-1)
 		idec=1;
-	else 
+	else
 		idec=0;
 
 	printk(KERN_INFO "PMS type is %d\n", idec);
@@ -966,11 +966,11 @@ static int init_mediavision(void)
 	/*
 	 *	Ok we have a PMS of some sort
 	 */
-	
+
 	mvv_write(0x04, mem_base>>12);	/* Set the memory area */
-	
+
 	/* Ok now load the defaults */
-	
+
 	for(i=0;i<0x19;i++)
 	{
 		if(i2c_defs[i]==0xFF)
@@ -978,7 +978,7 @@ static int init_mediavision(void)
 		else
 			pms_i2c_write(0x8A, i, i2c_defs[i]);
 	}
-	
+
 	pms_i2c_write(0xB8,0x00,0x12);
 	pms_i2c_write(0xB8,0x04,0x00);
 	pms_i2c_write(0xB8,0x07,0x00);
@@ -987,18 +987,18 @@ static int init_mediavision(void)
 	pms_i2c_write(0xB8,0x0A,0x00);
 	pms_i2c_write(0xB8,0x0B,0x10);
 	pms_i2c_write(0xB8,0x10,0x03);
-	
+
 	mvv_write(0x01, 0x00);
 	mvv_write(0x05, 0xA0);
 	mvv_write(0x08, 0x25);
 	mvv_write(0x09, 0x00);
-	mvv_write(0x0A, 0x20|MVVMEMORYWIDTH);	
-	
+	mvv_write(0x0A, 0x20|MVVMEMORYWIDTH);
+
 	mvv_write(0x10, 0x02);
 	mvv_write(0x1E, 0x0C);
 	mvv_write(0x1F, 0x03);
 	mvv_write(0x26, 0x06);
-	
+
 	mvv_write(0x2B, 0x00);
 	mvv_write(0x2C, 0x20);
 	mvv_write(0x2D, 0x00);
@@ -1018,13 +1018,13 @@ static int init_mediavision(void)
 /*
  *	Initialization and module stuff
  */
- 
+
 static int __init init_pms_cards(void)
 {
 	printk(KERN_INFO "Mediavision Pro Movie Studio driver 0.02\n");
-	
+
 	data_port = io_port +1;
-	
+
 	if(init_mediavision())
 	{
 		printk(KERN_INFO "Board not found.\n");
diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/video/pwc/Makefile
new file mode 100644
index 000000000000..8326684f49f3
--- /dev/null
+++ b/drivers/media/video/pwc/Makefile
@@ -0,0 +1,20 @@
+ifneq ($(KERNELRELEASE),)
+
+pwc-objs	:= pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o
+
+obj-$(CONFIG_USB_PWC) += pwc.o
+
+else
+
+KDIR := /lib/modules/$(shell uname -r)/build
+PWD := $(shell pwd)
+
+default:
+	$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
+
+endif
+
+clean:
+	rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c
+	rm -rf .tmp_versions
+
diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt
new file mode 100644
index 000000000000..11f751a6bda5
--- /dev/null
+++ b/drivers/media/video/pwc/philips.txt
@@ -0,0 +1,236 @@
+This file contains some additional information for the Philips and OEM webcams.
+E-mail: webcam@smcc.demon.nl                        Last updated: 2004-01-19
+Site: http://www.smcc.demon.nl/webcam/
+
+As of this moment, the following cameras are supported:
+ * Philips PCA645
+ * Philips PCA646
+ * Philips PCVC675
+ * Philips PCVC680
+ * Philips PCVC690
+ * Philips PCVC720/40
+ * Philips PCVC730
+ * Philips PCVC740
+ * Philips PCVC750
+ * Askey VC010
+ * Creative Labs Webcam 5
+ * Creative Labs Webcam Pro Ex
+ * Logitech QuickCam 3000 Pro
+ * Logitech QuickCam 4000 Pro
+ * Logitech QuickCam Notebook Pro
+ * Logitech QuickCam Zoom
+ * Logitech QuickCam Orbit
+ * Logitech QuickCam Sphere
+ * Samsung MPC-C10
+ * Samsung MPC-C30
+ * Sotec Afina Eye
+ * AME CU-001
+ * Visionite VCS-UM100
+ * Visionite VCS-UC300
+
+The main webpage for the Philips driver is at the address above. It contains
+a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin
+contains decompression routines that allow you to use higher image sizes and
+framerates; in addition the webcam uses less bandwidth on the USB bus (handy
+if you want to run more than 1 camera simultaneously). These routines fall
+under a NDA, and may therefor not be distributed as source; however, its use
+is completely optional.
+
+You can build this code either into your kernel, or as a module. I recommend
+the latter, since it makes troubleshooting a lot easier. The built-in
+microphone is supported through the USB Audio class.
+
+When you load the module you can set some default settings for the
+camera; some programs depend on a particular image-size or -format and
+don't know how to set it properly in the driver. The options are:
+
+size
+   Can be one of 'sqcif', 'qsif', 'qcif', 'sif', 'cif' or
+   'vga', for an image size of resp. 128x96, 160x120, 176x144,
+   320x240, 352x288 and 640x480 (of course, only for those cameras that
+   support these resolutions).
+
+fps
+   Specifies the desired framerate. Is an integer in the range of 4-30.
+
+fbufs
+   This paramter specifies the number of internal buffers to use for storing
+   frames from the cam. This will help if the process that reads images from
+   the cam is a bit slow or momentarely busy. However, on slow machines it
+   only introduces lag, so choose carefully. The default is 3, which is
+   reasonable. You can set it between 2 and 5.
+
+mbufs
+   This is an integer between 1 and 10. It will tell the module the number of
+   buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends.
+   The default is 2, which is adequate for most applications (double
+   buffering).
+
+   Should you experience a lot of 'Dumping frame...' messages during
+   grabbing with a tool that uses mmap(), you might want to increase if.
+   However, it doesn't really buffer images, it just gives you a bit more
+   slack when your program is behind. But you need a multi-threaded or
+   forked program to really take advantage of these buffers.
+
+   The absolute maximum is 10, but don't set it too high!  Every buffer takes
+   up 460 KB of RAM, so unless you have a lot of memory setting this to
+   something more than 4 is an absolute waste.  This memory is only
+   allocated during open(), so nothing is wasted when the camera is not in
+   use.
+
+power_save
+   When power_save is enabled (set to 1), the module will try to shut down
+   the cam on close() and re-activate on open(). This will save power and
+   turn off the LED. Not all cameras support this though (the 645 and 646
+   don't have power saving at all), and some models don't work either (they
+   will shut down, but never wake up). Consider this experimental. By
+   default this option is disabled.
+
+compression (only useful with the plugin)
+   With this option you can control the compression factor that the camera
+   uses to squeeze the image through the USB bus. You can set the
+   parameter between 0 and 3:
+     0 = prefer uncompressed images; if the requested mode is not available
+	 in an uncompressed format, the driver will silently switch to low
+	 compression.
+     1 = low compression.
+     2 = medium compression.
+     3 = high compression.
+
+   High compression takes less bandwidth of course, but it could also
+   introduce some unwanted artefacts. The default is 2, medium compression.
+   See the FAQ on the website for an overview of which modes require
+   compression.
+
+   The compression parameter does not apply to the 645 and 646 cameras
+   and OEM models derived from those (only a few). Most cams honour this
+   parameter.
+
+leds
+   This settings takes 2 integers, that define the on/off time for the LED
+   (in milliseconds). One of the interesting things that you can do with
+   this is let the LED blink while the camera is in use. This:
+
+     leds=500,500
+
+   will blink the LED once every second. But with:
+
+     leds=0,0
+
+   the LED never goes on, making it suitable for silent surveillance.
+
+   By default the camera's LED is on solid while in use, and turned off
+   when the camera is not used anymore.
+
+   This parameter works only with the ToUCam range of cameras (720, 730, 740,
+   750) and OEMs. For other cameras this command is silently ignored, and
+   the LED cannot be controlled.
+
+   Finally: this parameters does not take effect UNTIL the first time you
+   open the camera device. Until then, the LED remains on.
+
+dev_hint
+   A long standing problem with USB devices is their dynamic nature: you
+   never know what device a camera gets assigned; it depends on module load
+   order, the hub configuration, the order in which devices are plugged in,
+   and the phase of the moon (i.e. it can be random). With this option you
+   can give the driver a hint as to what video device node (/dev/videoX) it
+   should use with a specific camera. This is also handy if you have two
+   cameras of the same model.
+
+   A camera is specified by its type (the number from the camera model,
+   like PCA645, PCVC750VC, etc) and optionally the serial number (visible
+   in /proc/bus/usb/devices). A hint consists of a string with the following
+   format:
+
+      [type[.serialnumber]:]node
+
+   The square brackets mean that both the type and the serialnumber are
+   optional, but a serialnumber cannot be specified without a type (which
+   would be rather pointless). The serialnumber is separated from the type
+   by a '.'; the node number by a ':'.
+
+   This somewhat cryptic syntax is best explained by a few examples:
+
+     dev_hint=3,5              The first detected cam gets assigned
+			       /dev/video3, the second /dev/video5. Any
+			       other cameras will get the first free
+			       available slot (see below).
+
+     dev_hint=645:1,680:2      The PCA645 camera will get /dev/video1,
+			       and a PCVC680 /dev/video2.
+
+     dev_hint=645.0123:3,645.4567:0	The PCA645 camera with serialnumber
+					0123 goes to /dev/video3, the same
+					camera model with the 4567 serial
+					gets /dev/video0.
+
+     dev_hint=750:1,4,5,6       The PCVC750 camera will get /dev/video1, the
+				next 3 Philips cams will use /dev/video4
+				through /dev/video6.
+
+   Some points worth knowing:
+   - Serialnumbers are case sensitive and must be written full, including
+     leading zeroes (it's treated as a string).
+   - If a device node is already occupied, registration will fail and
+     the webcam is not available.
+   - You can have up to 64 video devices; be sure to make enough device
+     nodes in /dev if you want to spread the numbers (this does not apply
+     to devfs). After /dev/video9 comes /dev/video10 (not /dev/videoA).
+   - If a camera does not match any dev_hint, it will simply get assigned
+     the first available device node, just as it used to be.
+
+trace
+   In order to better detect problems, it is now possible to turn on a
+   'trace' of some of the calls the module makes; it logs all items in your
+   kernel log at debug level.
+
+   The trace variable is a bitmask; each bit represents a certain feature.
+   If you want to trace something, look up the bit value(s) in the table
+   below, add the values together and supply that to the trace variable.
+
+   Value  Value   Description					   Default
+   (dec)  (hex)
+       1    0x1   Module initialization; this will log messages       On
+		  while loading and unloading the module
+
+       2    0x2   probe() and disconnect() traces                     On
+
+       4    0x4   Trace open() and close() calls                      Off
+
+       8    0x8   read(), mmap() and associated ioctl() calls         Off
+
+      16   0x10   Memory allocation of buffers, etc.                  Off
+
+      32   0x20   Showing underflow, overflow and Dumping frame       On
+		  messages
+
+      64   0x40   Show viewport and image sizes                       Off
+
+     128   0x80   PWCX debugging                                      Off
+
+   For example, to trace the open() & read() fuctions, sum 8 + 4 = 12,
+   so you would supply trace=12 during insmod or modprobe. If
+   you want to turn the initialization and probing tracing off, set trace=0.
+   The default value for trace is 35 (0x23).
+
+
+
+Example:
+
+     # modprobe pwc size=cif fps=15 power_save=1
+
+The fbufs, mbufs and trace parameters are global and apply to all connected
+cameras. Each camera has its own set of buffers.
+
+size and fps only specify defaults when you open() the device; this is to
+accommodate some tools that don't set the size. You can change these
+settings after open() with the Video4Linux ioctl() calls. The default of
+defaults is QCIF size at 10 fps.
+
+The compression parameter is semiglobal; it sets the initial compression
+preference for all camera's, but this parameter can be set per camera with
+the VIDIOCPWCSCQUAL ioctl() call.
+
+All parameters are optional.
+
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
new file mode 100644
index 000000000000..4ba549bfa0e0
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -0,0 +1,1541 @@
+/* Driver for Philips webcam
+   Functions that send various control messages to the webcam, including
+   video modes.
+   (C) 1999-2003 Nemosoft Unv.
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+/*
+   Changes
+   2001/08/03  Alvarado   Added methods for changing white balance and
+			  red/green gains
+ */
+
+/* Control functions for the cam; brightness, contrast, video mode, etc. */
+
+#ifdef __KERNEL__
+#include <asm/uaccess.h>
+#endif
+#include <asm/errno.h>
+
+#include "pwc.h"
+#include "pwc-ioctl.h"
+#include "pwc-uncompress.h"
+#include "pwc-kiara.h"
+#include "pwc-timon.h"
+
+/* Request types: video */
+#define SET_LUM_CTL			0x01
+#define GET_LUM_CTL			0x02
+#define SET_CHROM_CTL			0x03
+#define GET_CHROM_CTL			0x04
+#define SET_STATUS_CTL			0x05
+#define GET_STATUS_CTL			0x06
+#define SET_EP_STREAM_CTL		0x07
+#define GET_EP_STREAM_CTL		0x08
+#define SET_MPT_CTL			0x0D
+#define GET_MPT_CTL			0x0E
+
+/* Selectors for the Luminance controls [GS]ET_LUM_CTL */
+#define AGC_MODE_FORMATTER			0x2000
+#define PRESET_AGC_FORMATTER			0x2100
+#define SHUTTER_MODE_FORMATTER			0x2200
+#define PRESET_SHUTTER_FORMATTER		0x2300
+#define PRESET_CONTOUR_FORMATTER		0x2400
+#define AUTO_CONTOUR_FORMATTER			0x2500
+#define BACK_LIGHT_COMPENSATION_FORMATTER	0x2600
+#define CONTRAST_FORMATTER			0x2700
+#define DYNAMIC_NOISE_CONTROL_FORMATTER		0x2800
+#define FLICKERLESS_MODE_FORMATTER		0x2900
+#define AE_CONTROL_SPEED			0x2A00
+#define BRIGHTNESS_FORMATTER			0x2B00
+#define GAMMA_FORMATTER				0x2C00
+
+/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */
+#define WB_MODE_FORMATTER			0x1000
+#define AWB_CONTROL_SPEED_FORMATTER		0x1100
+#define AWB_CONTROL_DELAY_FORMATTER		0x1200
+#define PRESET_MANUAL_RED_GAIN_FORMATTER	0x1300
+#define PRESET_MANUAL_BLUE_GAIN_FORMATTER	0x1400
+#define COLOUR_MODE_FORMATTER			0x1500
+#define SATURATION_MODE_FORMATTER1		0x1600
+#define SATURATION_MODE_FORMATTER2		0x1700
+
+/* Selectors for the Status controls [GS]ET_STATUS_CTL */
+#define SAVE_USER_DEFAULTS_FORMATTER		0x0200
+#define RESTORE_USER_DEFAULTS_FORMATTER		0x0300
+#define RESTORE_FACTORY_DEFAULTS_FORMATTER	0x0400
+#define READ_AGC_FORMATTER			0x0500
+#define READ_SHUTTER_FORMATTER			0x0600
+#define READ_RED_GAIN_FORMATTER			0x0700
+#define READ_BLUE_GAIN_FORMATTER		0x0800
+#define SENSOR_TYPE_FORMATTER1			0x0C00
+#define READ_RAW_Y_MEAN_FORMATTER		0x3100
+#define SET_POWER_SAVE_MODE_FORMATTER		0x3200
+#define MIRROR_IMAGE_FORMATTER			0x3300
+#define LED_FORMATTER				0x3400
+#define SENSOR_TYPE_FORMATTER2			0x3700
+
+/* Formatters for the Video Endpoint controls [GS]ET_EP_STREAM_CTL */
+#define VIDEO_OUTPUT_CONTROL_FORMATTER		0x0100
+
+/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */
+#define PT_RELATIVE_CONTROL_FORMATTER		0x01
+#define PT_RESET_CONTROL_FORMATTER		0x02
+#define PT_STATUS_FORMATTER			0x03
+
+static const char *size2name[PSZ_MAX] =
+{
+	"subQCIF",
+	"QSIF",
+	"QCIF",
+	"SIF",
+	"CIF",
+	"VGA",
+};
+
+/********/
+
+/* Entries for the Nala (645/646) camera; the Nala doesn't have compression
+   preferences, so you either get compressed or non-compressed streams.
+
+   An alternate value of 0 means this mode is not available at all.
+ */
+
+struct Nala_table_entry {
+	char alternate;			/* USB alternate setting */
+	int compressed;			/* Compressed yes/no */
+
+	unsigned char mode[3];		/* precomputed mode table */
+};
+
+static struct Nala_table_entry Nala_table[PSZ_MAX][8] =
+{
+#include "pwc-nala.h"
+};
+
+
+/****************************************************************************/
+
+
+#define SendControlMsg(request, value, buflen) \
+	usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \
+		request, \
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
+		value, \
+		pdev->vcinterface, \
+		&buf, buflen, 500)
+
+#define RecvControlMsg(request, value, buflen) \
+	usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \
+		request, \
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
+		value, \
+		pdev->vcinterface, \
+		&buf, buflen, 500)
+
+
+#if PWC_DEBUG
+void pwc_hexdump(void *p, int len)
+{
+	int i;
+	unsigned char *s;
+	char buf[100], *d;
+
+	s = (unsigned char *)p;
+	d = buf;
+	*d = '\0';
+	Debug("Doing hexdump @ %p, %d bytes.\n", p, len);
+	for (i = 0; i < len; i++) {
+		d += sprintf(d, "%02X ", *s++);
+		if ((i & 0xF) == 0xF) {
+			Debug("%s\n", buf);
+			d = buf;
+			*d = '\0';
+		}
+	}
+	if ((i & 0xF) != 0)
+		Debug("%s\n", buf);
+}
+#endif
+
+static inline int send_video_command(struct usb_device *udev, int index, void *buf, int buflen)
+{
+	return usb_control_msg(udev,
+		usb_sndctrlpipe(udev, 0),
+		SET_EP_STREAM_CTL,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		VIDEO_OUTPUT_CONTROL_FORMATTER,
+		index,
+		buf, buflen, 1000);
+}
+
+
+
+static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
+{
+	unsigned char buf[3];
+	int ret, fps;
+	struct Nala_table_entry *pEntry;
+	int frames2frames[31] =
+	{ /* closest match of framerate */
+	   0,  0,  0,  0,  4,  /*  0-4  */
+	   5,  5,  7,  7, 10,  /*  5-9  */
+	  10, 10, 12, 12, 15,  /* 10-14 */
+	  15, 15, 15, 20, 20,  /* 15-19 */
+	  20, 20, 20, 24, 24,  /* 20-24 */
+	  24, 24, 24, 24, 24,  /* 25-29 */
+	  24                   /* 30    */
+	};
+	int frames2table[31] =
+	{ 0, 0, 0, 0, 0, /*  0-4  */
+	  1, 1, 1, 2, 2, /*  5-9  */
+	  3, 3, 4, 4, 4, /* 10-14 */
+	  5, 5, 5, 5, 5, /* 15-19 */
+	  6, 6, 6, 6, 7, /* 20-24 */
+	  7, 7, 7, 7, 7, /* 25-29 */
+	  7              /* 30    */
+	};
+
+	if (size < 0 || size > PSZ_CIF || frames < 4 || frames > 25)
+		return -EINVAL;
+	frames = frames2frames[frames];
+	fps = frames2table[frames];
+	pEntry = &Nala_table[size][fps];
+	if (pEntry->alternate == 0)
+		return -EINVAL;
+
+	if (pEntry->compressed)
+		return -ENOENT; /* Not supported. */
+
+	memcpy(buf, pEntry->mode, 3);
+	ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3);
+	if (ret < 0) {
+		Debug("Failed to send video command... %d\n", ret);
+		return ret;
+	}
+	if (pEntry->compressed && pdev->vpalette != VIDEO_PALETTE_RAW)
+	 {
+	   switch(pdev->type) {
+	     case 645:
+	     case 646:
+/*	       pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); */
+	       break;
+
+	     case 675:
+	     case 680:
+	     case 690:
+	     case 720:
+	     case 730:
+	     case 740:
+	     case 750:
+/*	       pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */
+	       break;
+	   }
+	}
+
+	pdev->cmd_len = 3;
+	memcpy(pdev->cmd_buf, buf, 3);
+
+	/* Set various parameters */
+	pdev->vframes = frames;
+	pdev->vsize = size;
+	pdev->valternate = pEntry->alternate;
+	pdev->image = pwc_image_sizes[size];
+	pdev->frame_size = (pdev->image.x * pdev->image.y * 3) / 2;
+	if (pEntry->compressed) {
+		if (pdev->release < 5) { /* 4 fold compression */
+			pdev->vbandlength = 528;
+			pdev->frame_size /= 4;
+		}
+		else {
+			pdev->vbandlength = 704;
+			pdev->frame_size /= 3;
+		}
+	}
+	else
+		pdev->vbandlength = 0;
+	return 0;
+}
+
+
+static inline int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, int compression, int snapshot)
+{
+	unsigned char buf[13];
+	const struct Timon_table_entry *pChoose;
+	int ret, fps;
+
+	if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3)
+		return -EINVAL;
+	if (size == PSZ_VGA && frames > 15)
+		return -EINVAL;
+	fps = (frames / 5) - 1;
+
+	/* Find a supported framerate with progressively higher compression ratios
+	   if the preferred ratio is not available.
+	*/
+	pChoose = NULL;
+	while (compression <= 3) {
+	   pChoose = &Timon_table[size][fps][compression];
+	   if (pChoose->alternate != 0)
+	     break;
+	   compression++;
+	}
+	if (pChoose == NULL || pChoose->alternate == 0)
+		return -ENOENT; /* Not supported. */
+
+	memcpy(buf, pChoose->mode, 13);
+	if (snapshot)
+		buf[0] |= 0x80;
+	ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13);
+	if (ret < 0)
+		return ret;
+
+/* 	if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW)
+	   pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */
+
+	pdev->cmd_len = 13;
+	memcpy(pdev->cmd_buf, buf, 13);
+
+	/* Set various parameters */
+	pdev->vframes = frames;
+	pdev->vsize = size;
+	pdev->vsnapshot = snapshot;
+	pdev->valternate = pChoose->alternate;
+	pdev->image = pwc_image_sizes[size];
+	pdev->vbandlength = pChoose->bandlength;
+	if (pChoose->bandlength > 0)
+		pdev->frame_size = (pChoose->bandlength * pdev->image.y) / 4;
+	else
+		pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8;
+	return 0;
+}
+
+
+static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, int compression, int snapshot)
+{
+	const struct Kiara_table_entry *pChoose = NULL;
+	int fps, ret;
+	unsigned char buf[12];
+	struct Kiara_table_entry RawEntry = {6, 773, 1272, {0xAD, 0xF4, 0x10, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}};
+
+	if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3)
+		return -EINVAL;
+	if (size == PSZ_VGA && frames > 15)
+		return -EINVAL;
+	fps = (frames / 5) - 1;
+
+	/* special case: VGA @ 5 fps and snapshot is raw bayer mode */
+	if (size == PSZ_VGA && frames == 5 && snapshot)
+	{
+		/* Only available in case the raw palette is selected or
+		   we have the decompressor available. This mode is
+		   only available in compressed form
+		*/
+		if (pdev->vpalette == VIDEO_PALETTE_RAW)
+		{
+			Info("Choosing VGA/5 BAYER mode (%d).\n", pdev->vpalette);
+			pChoose = &RawEntry;
+		}
+		else
+		{
+			Info("VGA/5 BAYER mode _must_ have a decompressor available, or use RAW palette.\n");
+		}
+	}
+	else
+	{
+		/* Find a supported framerate with progressively higher compression ratios
+		   if the preferred ratio is not available.
+		   Skip this step when using RAW modes.
+		*/
+		while (compression <= 3) {
+			pChoose = &Kiara_table[size][fps][compression];
+			if (pChoose->alternate != 0)
+				break;
+			compression++;
+		}
+	}
+	if (pChoose == NULL || pChoose->alternate == 0)
+		return -ENOENT; /* Not supported. */
+
+	Debug("Using alternate setting %d.\n", pChoose->alternate);
+
+	/* usb_control_msg won't take staticly allocated arrays as argument?? */
+	memcpy(buf, pChoose->mode, 12);
+	if (snapshot)
+		buf[0] |= 0x80;
+
+	/* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */
+	ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12);
+	if (ret < 0)
+		return ret;
+
+/*	if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW)
+	  pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */
+
+	pdev->cmd_len = 12;
+	memcpy(pdev->cmd_buf, buf, 12);
+	/* All set and go */
+	pdev->vframes = frames;
+	pdev->vsize = size;
+	pdev->vsnapshot = snapshot;
+	pdev->valternate = pChoose->alternate;
+	pdev->image = pwc_image_sizes[size];
+	pdev->vbandlength = pChoose->bandlength;
+	if (pdev->vbandlength > 0)
+		pdev->frame_size = (pdev->vbandlength * pdev->image.y) / 4;
+	else
+		pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8;
+	return 0;
+}
+
+
+
+static void pwc_set_image_buffer_size(struct pwc_device *pdev)
+{
+	int i, factor = 0, filler = 0;
+
+	/* for PALETTE_YUV420P */
+	switch(pdev->vpalette)
+	{
+	case VIDEO_PALETTE_YUV420P:
+		factor = 6;
+		filler = 128;
+		break;
+	case VIDEO_PALETTE_RAW:
+		factor = 6; /* can be uncompressed YUV420P */
+		filler = 0;
+		break;
+	}
+
+	/* Set sizes in bytes */
+	pdev->image.size = pdev->image.x * pdev->image.y * factor / 4;
+	pdev->view.size  = pdev->view.x  * pdev->view.y  * factor / 4;
+
+	/* Align offset, or you'll get some very weird results in
+	   YUV420 mode... x must be multiple of 4 (to get the Y's in
+	   place), and y even (or you'll mixup U & V). This is less of a
+	   problem for YUV420P.
+	 */
+	pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC;
+	pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE;
+
+	/* Fill buffers with gray or black */
+	for (i = 0; i < MAX_IMAGES; i++) {
+		if (pdev->image_ptr[i] != NULL)
+			memset(pdev->image_ptr[i], filler, pdev->view.size);
+	}
+}
+
+
+
+/**
+   @pdev: device structure
+   @width: viewport width
+   @height: viewport height
+   @frame: framerate, in fps
+   @compression: preferred compression ratio
+   @snapshot: snapshot mode or streaming
+ */
+int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot)
+{
+	int ret, size;
+
+	Trace(TRACE_FLOW, "set_video_mode(%dx%d @ %d, palette %d).\n", width, height, frames, pdev->vpalette);
+	size = pwc_decode_size(pdev, width, height);
+	if (size < 0) {
+		Debug("Could not find suitable size.\n");
+		return -ERANGE;
+	}
+	Debug("decode_size = %d.\n", size);
+
+	ret = -EINVAL;
+	switch(pdev->type) {
+	case 645:
+	case 646:
+		ret = set_video_mode_Nala(pdev, size, frames);
+		break;
+
+	case 675:
+	case 680:
+	case 690:
+		ret = set_video_mode_Timon(pdev, size, frames, compression, snapshot);
+		break;
+
+	case 720:
+	case 730:
+	case 740:
+	case 750:
+		ret = set_video_mode_Kiara(pdev, size, frames, compression, snapshot);
+		break;
+	}
+	if (ret < 0) {
+		if (ret == -ENOENT)
+			Info("Video mode %s@%d fps is only supported with the decompressor module (pwcx).\n", size2name[size], frames);
+		else {
+			Err("Failed to set video mode %s@%d fps; return code = %d\n", size2name[size], frames, ret);
+		}
+		return ret;
+	}
+	pdev->view.x = width;
+	pdev->view.y = height;
+	pdev->frame_total_size = pdev->frame_size + pdev->frame_header_size + pdev->frame_trailer_size;
+	pwc_set_image_buffer_size(pdev);
+	Trace(TRACE_SIZE, "Set viewport to %dx%d, image size is %dx%d.\n", width, height, pwc_image_sizes[size].x, pwc_image_sizes[size].y);
+	return 0;
+}
+
+
+/* BRIGHTNESS */
+
+int pwc_get_brightness(struct pwc_device *pdev)
+{
+	char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	return buf << 9;
+}
+
+int pwc_set_brightness(struct pwc_device *pdev, int value)
+{
+	char buf;
+
+	if (value < 0)
+		value = 0;
+	if (value > 0xffff)
+		value = 0xffff;
+	buf = (value >> 9) & 0x7f;
+	return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+}
+
+/* CONTRAST */
+
+int pwc_get_contrast(struct pwc_device *pdev)
+{
+	char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	return buf << 10;
+}
+
+int pwc_set_contrast(struct pwc_device *pdev, int value)
+{
+	char buf;
+
+	if (value < 0)
+		value = 0;
+	if (value > 0xffff)
+		value = 0xffff;
+	buf = (value >> 10) & 0x3f;
+	return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1);
+}
+
+/* GAMMA */
+
+int pwc_get_gamma(struct pwc_device *pdev)
+{
+	char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	return buf << 11;
+}
+
+int pwc_set_gamma(struct pwc_device *pdev, int value)
+{
+	char buf;
+
+	if (value < 0)
+		value = 0;
+	if (value > 0xffff)
+		value = 0xffff;
+	buf = (value >> 11) & 0x1f;
+	return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1);
+}
+
+
+/* SATURATION */
+
+int pwc_get_saturation(struct pwc_device *pdev)
+{
+	char buf;
+	int ret;
+
+	if (pdev->type < 675)
+		return -1;
+	ret = RecvControlMsg(GET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1);
+	if (ret < 0)
+		return ret;
+	return 32768 + buf * 327;
+}
+
+int pwc_set_saturation(struct pwc_device *pdev, int value)
+{
+	char buf;
+
+	if (pdev->type < 675)
+		return -EINVAL;
+	if (value < 0)
+		value = 0;
+	if (value > 0xffff)
+		value = 0xffff;
+	/* saturation ranges from -100 to +100 */
+	buf = (value - 32768) / 327;
+	return SendControlMsg(SET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1);
+}
+
+/* AGC */
+
+static inline int pwc_set_agc(struct pwc_device *pdev, int mode, int value)
+{
+	char buf;
+	int ret;
+
+	if (mode)
+		buf = 0x0; /* auto */
+	else
+		buf = 0xff; /* fixed */
+
+	ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+
+	if (!mode && ret >= 0) {
+		if (value < 0)
+			value = 0;
+		if (value > 0xffff)
+			value = 0xffff;
+		buf = (value >> 10) & 0x3F;
+		ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+	}
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static inline int pwc_get_agc(struct pwc_device *pdev, int *value)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+
+	if (buf != 0) { /* fixed */
+		ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+		if (ret < 0)
+			return ret;
+		if (buf > 0x3F)
+			buf = 0x3F;
+		*value = (buf << 10);
+	}
+	else { /* auto */
+		ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1);
+		if (ret < 0)
+			return ret;
+		/* Gah... this value ranges from 0x00 ... 0x9F */
+		if (buf > 0x9F)
+			buf = 0x9F;
+		*value = -(48 + buf * 409);
+	}
+
+	return 0;
+}
+
+static inline int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value)
+{
+	char buf[2];
+	int speed, ret;
+
+
+	if (mode)
+		buf[0] = 0x0;	/* auto */
+	else
+		buf[0] = 0xff; /* fixed */
+
+	ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1);
+
+	if (!mode && ret >= 0) {
+		if (value < 0)
+			value = 0;
+		if (value > 0xffff)
+			value = 0xffff;
+		switch(pdev->type) {
+		case 675:
+		case 680:
+		case 690:
+			/* speed ranges from 0x0 to 0x290 (656) */
+			speed = (value / 100);
+			buf[1] = speed >> 8;
+			buf[0] = speed & 0xff;
+			break;
+		case 720:
+		case 730:
+		case 740:
+		case 750:
+			/* speed seems to range from 0x0 to 0xff */
+			buf[1] = 0;
+			buf[0] = value >> 8;
+			break;
+		}
+
+		ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2);
+	}
+	return ret;
+}
+
+
+/* POWER */
+
+int pwc_camera_power(struct pwc_device *pdev, int power)
+{
+	char buf;
+
+	if (pdev->type < 675 || (pdev->type < 730 && pdev->release < 6))
+		return 0;	/* Not supported by Nala or Timon < release 6 */
+
+	if (power)
+		buf = 0x00; /* active */
+	else
+		buf = 0xFF; /* power save */
+	return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1);
+}
+
+
+
+/* private calls */
+
+static inline int pwc_restore_user(struct pwc_device *pdev)
+{
+	char buf; /* dummy */
+	return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0);
+}
+
+static inline int pwc_save_user(struct pwc_device *pdev)
+{
+	char buf; /* dummy */
+	return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0);
+}
+
+static inline int pwc_restore_factory(struct pwc_device *pdev)
+{
+	char buf; /* dummy */
+	return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0);
+}
+
+ /* ************************************************* */
+ /* Patch by Alvarado: (not in the original version   */
+
+ /*
+  * the camera recognizes modes from 0 to 4:
+  *
+  * 00: indoor (incandescant lighting)
+  * 01: outdoor (sunlight)
+  * 02: fluorescent lighting
+  * 03: manual
+  * 04: auto
+  */
+static inline int pwc_set_awb(struct pwc_device *pdev, int mode)
+{
+	char buf;
+	int ret;
+
+	if (mode < 0)
+	    mode = 0;
+
+	if (mode > 4)
+	    mode = 4;
+
+	buf = mode & 0x07; /* just the lowest three bits */
+
+	ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static inline int pwc_get_awb(struct pwc_device *pdev)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+
+	if (ret < 0)
+		return ret;
+	return buf;
+}
+
+static inline int pwc_set_red_gain(struct pwc_device *pdev, int value)
+{
+	unsigned char buf;
+
+	if (value < 0)
+		value = 0;
+	if (value > 0xffff)
+		value = 0xffff;
+	/* only the msb is considered */
+	buf = value >> 8;
+	return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+}
+
+static inline int pwc_get_red_gain(struct pwc_device *pdev, int *value)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+	if (ret < 0)
+	    return ret;
+	*value = buf << 8;
+	return 0;
+}
+
+
+static inline int pwc_set_blue_gain(struct pwc_device *pdev, int value)
+{
+	unsigned char buf;
+
+	if (value < 0)
+		value = 0;
+	if (value > 0xffff)
+		value = 0xffff;
+	/* only the msb is considered */
+	buf = value >> 8;
+	return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+}
+
+static inline int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+	if (ret < 0)
+	    return ret;
+	*value = buf << 8;
+	return 0;
+}
+
+
+/* The following two functions are different, since they only read the
+   internal red/blue gains, which may be different from the manual
+   gains set or read above.
+ */
+static inline int pwc_read_red_gain(struct pwc_device *pdev, int *value)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	*value = buf << 8;
+	return 0;
+}
+
+static inline int pwc_read_blue_gain(struct pwc_device *pdev, int *value)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	*value = buf << 8;
+	return 0;
+}
+
+
+static inline int pwc_set_wb_speed(struct pwc_device *pdev, int speed)
+{
+	unsigned char buf;
+
+	/* useful range is 0x01..0x20 */
+	buf = speed / 0x7f0;
+	return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+}
+
+static inline int pwc_get_wb_speed(struct pwc_device *pdev, int *value)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	*value = buf * 0x7f0;
+	return 0;
+}
+
+
+static inline int pwc_set_wb_delay(struct pwc_device *pdev, int delay)
+{
+	unsigned char buf;
+
+	/* useful range is 0x01..0x3F */
+	buf = (delay >> 10);
+	return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+}
+
+static inline int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	*value = buf << 10;
+	return 0;
+}
+
+
+int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value)
+{
+	unsigned char buf[2];
+
+	if (pdev->type < 730)
+		return 0;
+	on_value /= 100;
+	off_value /= 100;
+	if (on_value < 0)
+		on_value = 0;
+	if (on_value > 0xff)
+		on_value = 0xff;
+	if (off_value < 0)
+		off_value = 0;
+	if (off_value > 0xff)
+		off_value = 0xff;
+
+	buf[0] = on_value;
+	buf[1] = off_value;
+
+	return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2);
+}
+
+static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
+{
+	unsigned char buf[2];
+	int ret;
+
+	if (pdev->type < 730) {
+		*on_value = -1;
+		*off_value = -1;
+		return 0;
+	}
+
+	ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2);
+	if (ret < 0)
+		return ret;
+	*on_value = buf[0] * 100;
+	*off_value = buf[1] * 100;
+	return 0;
+}
+
+static inline int pwc_set_contour(struct pwc_device *pdev, int contour)
+{
+	unsigned char buf;
+	int ret;
+
+	if (contour < 0)
+		buf = 0xff; /* auto contour on */
+	else
+		buf = 0x0; /* auto contour off */
+	ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+
+	if (contour < 0)
+		return 0;
+	if (contour > 0xffff)
+		contour = 0xffff;
+
+	buf = (contour >> 10); /* contour preset is [0..3f] */
+	ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static inline int pwc_get_contour(struct pwc_device *pdev, int *contour)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+
+	if (buf == 0) {
+		/* auto mode off, query current preset value */
+		ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+		if (ret < 0)
+			return ret;
+		*contour = buf << 10;
+	}
+	else
+		*contour = -1;
+	return 0;
+}
+
+
+static inline int pwc_set_backlight(struct pwc_device *pdev, int backlight)
+{
+	unsigned char buf;
+
+	if (backlight)
+		buf = 0xff;
+	else
+		buf = 0x0;
+	return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+}
+
+static inline int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
+{
+	int ret;
+	unsigned char buf;
+
+	ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	*backlight = buf;
+	return 0;
+}
+
+
+static inline int pwc_set_flicker(struct pwc_device *pdev, int flicker)
+{
+	unsigned char buf;
+
+	if (flicker)
+		buf = 0xff;
+	else
+		buf = 0x0;
+	return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+}
+
+static inline int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
+{
+	int ret;
+	unsigned char buf;
+
+	ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	*flicker = buf;
+	return 0;
+}
+
+
+static inline int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise)
+{
+	unsigned char buf;
+
+	if (noise < 0)
+		noise = 0;
+	if (noise > 3)
+		noise = 3;
+	buf = noise;
+	return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+}
+
+static inline int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
+{
+	int ret;
+	unsigned char buf;
+
+	ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	*noise = buf;
+	return 0;
+}
+
+static int pwc_mpt_reset(struct pwc_device *pdev, int flags)
+{
+	unsigned char buf;
+
+	buf = flags & 0x03; // only lower two bits are currently used
+	return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1);
+}
+
+static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
+{
+	unsigned char buf[4];
+
+	/* set new relative angle; angles are expressed in degrees * 100,
+	   but cam as .5 degree resolution, hence divide by 200. Also
+	   the angle must be multiplied by 64 before it's send to
+	   the cam (??)
+	 */
+	pan  =  64 * pan  / 100;
+	tilt = -64 * tilt / 100; /* positive tilt is down, which is not what the user would expect */
+	buf[0] = pan & 0xFF;
+	buf[1] = (pan >> 8) & 0xFF;
+	buf[2] = tilt & 0xFF;
+	buf[3] = (tilt >> 8) & 0xFF;
+	return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4);
+}
+
+static inline int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *status)
+{
+	int ret;
+	unsigned char buf[5];
+
+	ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5);
+	if (ret < 0)
+		return ret;
+	status->status = buf[0] & 0x7; // 3 bits are used for reporting
+	status->time_pan = (buf[1] << 8) + buf[2];
+	status->time_tilt = (buf[3] << 8) + buf[4];
+	return 0;
+}
+
+
+int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
+{
+	unsigned char buf;
+	int ret = -1, request;
+
+	if (pdev->type < 675)
+		request = SENSOR_TYPE_FORMATTER1;
+	else if (pdev->type < 730)
+		return -1; /* The Vesta series doesn't have this call */
+	else
+		request = SENSOR_TYPE_FORMATTER2;
+
+	ret = RecvControlMsg(GET_STATUS_CTL, request, 1);
+	if (ret < 0)
+		return ret;
+	if (pdev->type < 675)
+		*sensor = buf | 0x100;
+	else
+		*sensor = buf;
+	return 0;
+}
+
+
+ /* End of Add-Ons                                    */
+ /* ************************************************* */
+
+
+int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
+{
+	int ret = 0;
+
+	switch(cmd) {
+	case VIDIOCPWCRUSER:
+	{
+		if (pwc_restore_user(pdev))
+			ret = -EINVAL;
+		break;
+	}
+
+	case VIDIOCPWCSUSER:
+	{
+		if (pwc_save_user(pdev))
+			ret = -EINVAL;
+		break;
+	}
+
+	case VIDIOCPWCFACTORY:
+	{
+		if (pwc_restore_factory(pdev))
+			ret = -EINVAL;
+		break;
+	}
+
+	case VIDIOCPWCSCQUAL:
+	{
+		int *qual = arg;
+
+		if (*qual < 0 || *qual > 3)
+			ret = -EINVAL;
+		else
+			ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, *qual, pdev->vsnapshot);
+		if (ret >= 0)
+			pdev->vcompression = *qual;
+		break;
+	}
+
+	case VIDIOCPWCGCQUAL:
+	{
+		int *qual = arg;
+		*qual = pdev->vcompression;
+		break;
+	}
+
+	case VIDIOCPWCPROBE:
+	{
+		struct pwc_probe *probe = arg;
+		strcpy(probe->name, pdev->vdev->name);
+		probe->type = pdev->type;
+		break;
+	}
+
+	case VIDIOCPWCGSERIAL:
+	{
+		struct pwc_serial *serial = arg;
+		strcpy(serial->serial, pdev->serial);
+		break;
+	}
+
+	case VIDIOCPWCSAGC:
+	{
+		int *agc = arg;
+		if (pwc_set_agc(pdev, *agc < 0 ? 1 : 0, *agc))
+			ret = -EINVAL;
+		break;
+	}
+
+	case VIDIOCPWCGAGC:
+	{
+		int *agc = arg;
+
+		if (pwc_get_agc(pdev, agc))
+			ret = -EINVAL;
+		break;
+	}
+
+	case VIDIOCPWCSSHUTTER:
+	{
+		int *shutter_speed = arg;
+		ret = pwc_set_shutter_speed(pdev, *shutter_speed < 0 ? 1 : 0, *shutter_speed);
+		break;
+	}
+
+	case VIDIOCPWCSAWB:
+	{
+		struct pwc_whitebalance *wb = arg;
+
+		ret = pwc_set_awb(pdev, wb->mode);
+		if (ret >= 0 && wb->mode == PWC_WB_MANUAL) {
+			pwc_set_red_gain(pdev, wb->manual_red);
+			pwc_set_blue_gain(pdev, wb->manual_blue);
+		}
+		break;
+	}
+
+	case VIDIOCPWCGAWB:
+	{
+		struct pwc_whitebalance *wb = arg;
+
+		memset(wb, 0, sizeof(struct pwc_whitebalance));
+		wb->mode = pwc_get_awb(pdev);
+		if (wb->mode < 0)
+			ret = -EINVAL;
+		else {
+			if (wb->mode == PWC_WB_MANUAL) {
+				ret = pwc_get_red_gain(pdev, &wb->manual_red);
+				if (ret < 0)
+					break;
+				ret = pwc_get_blue_gain(pdev, &wb->manual_blue);
+				if (ret < 0)
+					break;
+			}
+			if (wb->mode == PWC_WB_AUTO) {
+				ret = pwc_read_red_gain(pdev, &wb->read_red);
+				if (ret < 0)
+					break;
+				ret = pwc_read_blue_gain(pdev, &wb->read_blue);
+				if (ret < 0)
+					break;
+			}
+		}
+		break;
+	}
+
+	case VIDIOCPWCSAWBSPEED:
+	{
+		struct pwc_wb_speed *wbs = arg;
+
+		if (wbs->control_speed > 0) {
+			ret = pwc_set_wb_speed(pdev, wbs->control_speed);
+		}
+		if (wbs->control_delay > 0) {
+			ret = pwc_set_wb_delay(pdev, wbs->control_delay);
+		}
+		break;
+	}
+
+	case VIDIOCPWCGAWBSPEED:
+	{
+		struct pwc_wb_speed *wbs = arg;
+
+		ret = pwc_get_wb_speed(pdev, &wbs->control_speed);
+		if (ret < 0)
+			break;
+		ret = pwc_get_wb_delay(pdev, &wbs->control_delay);
+		if (ret < 0)
+			break;
+		break;
+	}
+
+	case VIDIOCPWCSLED:
+	{
+		struct pwc_leds *leds = arg;
+		ret = pwc_set_leds(pdev, leds->led_on, leds->led_off);
+	    	break;
+	}
+
+
+	case VIDIOCPWCGLED:
+	{
+		struct pwc_leds *leds = arg;
+		ret = pwc_get_leds(pdev, &leds->led_on, &leds->led_off);
+		break;
+	}
+
+	case VIDIOCPWCSCONTOUR:
+	{
+		int *contour = arg;
+		ret = pwc_set_contour(pdev, *contour);
+		break;
+	}
+
+	case VIDIOCPWCGCONTOUR:
+	{
+		int *contour = arg;
+		ret = pwc_get_contour(pdev, contour);
+		break;
+	}
+
+	case VIDIOCPWCSBACKLIGHT:
+	{
+		int *backlight = arg;
+		ret = pwc_set_backlight(pdev, *backlight);
+		break;
+	}
+
+	case VIDIOCPWCGBACKLIGHT:
+	{
+		int *backlight = arg;
+		ret = pwc_get_backlight(pdev, backlight);
+		break;
+	}
+
+	case VIDIOCPWCSFLICKER:
+	{
+		int *flicker = arg;
+		ret = pwc_set_flicker(pdev, *flicker);
+		break;
+	}
+
+	case VIDIOCPWCGFLICKER:
+	{
+		int *flicker = arg;
+		ret = pwc_get_flicker(pdev, flicker);
+		break;
+	}
+
+	case VIDIOCPWCSDYNNOISE:
+	{
+		int *dynnoise = arg;
+		ret = pwc_set_dynamic_noise(pdev, *dynnoise);
+		break;
+	}
+
+	case VIDIOCPWCGDYNNOISE:
+	{
+		int *dynnoise = arg;
+		ret = pwc_get_dynamic_noise(pdev, dynnoise);
+		break;
+	}
+
+	case VIDIOCPWCGREALSIZE:
+	{
+		struct pwc_imagesize *size = arg;
+		size->width = pdev->image.x;
+		size->height = pdev->image.y;
+		break;
+	}
+
+	case VIDIOCPWCMPTRESET:
+	{
+		if (pdev->features & FEATURE_MOTOR_PANTILT)
+		{
+			int *flags = arg;
+
+			ret = pwc_mpt_reset(pdev, *flags);
+			if (ret >= 0)
+			{
+				pdev->pan_angle = 0;
+				pdev->tilt_angle = 0;
+			}
+		}
+		else
+		{
+			ret = -ENXIO;
+		}
+		break;
+	}
+
+	case VIDIOCPWCMPTGRANGE:
+	{
+		if (pdev->features & FEATURE_MOTOR_PANTILT)
+		{
+			struct pwc_mpt_range *range = arg;
+			*range = pdev->angle_range;
+		}
+		else
+		{
+			ret = -ENXIO;
+		}
+		break;
+	}
+
+	case VIDIOCPWCMPTSANGLE:
+	{
+		int new_pan, new_tilt;
+
+		if (pdev->features & FEATURE_MOTOR_PANTILT)
+		{
+			struct pwc_mpt_angles *angles = arg;
+			/* The camera can only set relative angles, so
+			   do some calculations when getting an absolute angle .
+			 */
+			if (angles->absolute)
+			{
+				new_pan  = angles->pan;
+				new_tilt = angles->tilt;
+			}
+			else
+			{
+				new_pan  = pdev->pan_angle  + angles->pan;
+				new_tilt = pdev->tilt_angle + angles->tilt;
+			}
+			/* check absolute ranges */
+			if (new_pan  < pdev->angle_range.pan_min  ||
+			    new_pan  > pdev->angle_range.pan_max  ||
+			    new_tilt < pdev->angle_range.tilt_min ||
+			    new_tilt > pdev->angle_range.tilt_max)
+			{
+				ret = -ERANGE;
+			}
+			else
+			{
+				/* go to relative range, check again */
+				new_pan  -= pdev->pan_angle;
+				new_tilt -= pdev->tilt_angle;
+				/* angles are specified in degrees * 100, thus the limit = 36000 */
+				if (new_pan < -36000 || new_pan > 36000 || new_tilt < -36000 || new_tilt > 36000)
+					ret = -ERANGE;
+			}
+			if (ret == 0) /* no errors so far */
+			{
+				ret = pwc_mpt_set_angle(pdev, new_pan, new_tilt);
+				if (ret >= 0)
+				{
+					pdev->pan_angle  += new_pan;
+					pdev->tilt_angle += new_tilt;
+				}
+				if (ret == -EPIPE) /* stall -> out of range */
+					ret = -ERANGE;
+			}
+		}
+		else
+		{
+			ret = -ENXIO;
+		}
+		break;
+	}
+
+	case VIDIOCPWCMPTGANGLE:
+	{
+
+		if (pdev->features & FEATURE_MOTOR_PANTILT)
+		{
+			struct pwc_mpt_angles *angles = arg;
+
+			angles->absolute = 1;
+			angles->pan  = pdev->pan_angle;
+			angles->tilt = pdev->tilt_angle;
+		}
+		else
+		{
+			ret = -ENXIO;
+		}
+		break;
+	}
+
+	case VIDIOCPWCMPTSTATUS:
+	{
+		if (pdev->features & FEATURE_MOTOR_PANTILT)
+		{
+			struct pwc_mpt_status *status = arg;
+			ret = pwc_mpt_get_status(pdev, status);
+		}
+		else
+		{
+			ret = -ENXIO;
+		}
+		break;
+	}
+
+	case VIDIOCPWCGVIDCMD:
+	{
+		struct pwc_video_command *cmd = arg;
+
+		cmd->type = pdev->type;
+		cmd->release = pdev->release;
+		cmd->command_len = pdev->cmd_len;
+		memcpy(&cmd->command_buf, pdev->cmd_buf, pdev->cmd_len);
+		cmd->bandlength = pdev->vbandlength;
+		cmd->frame_size = pdev->frame_size;
+		break;
+	}
+       /*
+	case VIDIOCPWCGVIDTABLE:
+	{
+		struct pwc_table_init_buffer *table = arg;
+		table->len = pdev->cmd_len;
+		memcpy(&table->buffer, pdev->decompress_data, pdev->decompressor->table_size);
+		break;
+	}
+	*/
+
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+
+	if (ret > 0)
+		return 0;
+	return ret;
+}
+
+
+
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
new file mode 100644
index 000000000000..41418294a32b
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -0,0 +1,2205 @@
+/* Linux driver for Philips webcam
+   USB and Video4Linux interface part.
+   (C) 1999-2004 Nemosoft Unv.
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+*/
+
+/*
+   This code forms the interface between the USB layers and the Philips
+   specific stuff. Some adanved stuff of the driver falls under an
+   NDA, signed between me and Philips B.V., Eindhoven, the Netherlands, and
+   is thus not distributed in source form. The binary pwcx.o module
+   contains the code that falls under the NDA.
+
+   In case you're wondering: 'pwc' stands for "Philips WebCam", but
+   I really didn't want to type 'philips_web_cam' every time (I'm lazy as
+   any Linux kernel hacker, but I don't like uncomprehensible abbreviations
+   without explanation).
+
+   Oh yes, convention: to disctinguish between all the various pointers to
+   device-structures, I use these names for the pointer variables:
+   udev: struct usb_device *
+   vdev: struct video_device *
+   pdev: struct pwc_devive *
+*/
+
+/* Contributors:
+   - Alvarado: adding whitebalance code
+   - Alistar Moire: QuickCam 3000 Pro device/product ID
+   - Tony Hoyle: Creative Labs Webcam 5 device/product ID
+   - Mark Burazin: solving hang in VIDIOCSYNC when camera gets unplugged
+   - Jk Fang: Sotec Afina Eye ID
+   - Xavier Roche: QuickCam Pro 4000 ID
+   - Jens Knudsen: QuickCam Zoom ID
+   - J. Debert: QuickCam for Notebooks ID
+*/
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <asm/io.h>
+
+#include "pwc.h"
+#include "pwc-ioctl.h"
+#include "pwc-kiara.h"
+#include "pwc-timon.h"
+#include "pwc-uncompress.h"
+
+/* Function prototypes and driver templates */
+
+/* hotplug device table support */
+static struct usb_device_id pwc_device_table [] = {
+	{ USB_DEVICE(0x0471, 0x0302) }, /* Philips models */
+	{ USB_DEVICE(0x0471, 0x0303) },
+	{ USB_DEVICE(0x0471, 0x0304) },
+	{ USB_DEVICE(0x0471, 0x0307) },
+	{ USB_DEVICE(0x0471, 0x0308) },
+	{ USB_DEVICE(0x0471, 0x030C) },
+	{ USB_DEVICE(0x0471, 0x0310) },
+	{ USB_DEVICE(0x0471, 0x0311) },
+	{ USB_DEVICE(0x0471, 0x0312) },
+	{ USB_DEVICE(0x0471, 0x0313) }, /* the 'new' 720K */
+	{ USB_DEVICE(0x069A, 0x0001) }, /* Askey */
+	{ USB_DEVICE(0x046D, 0x08B0) }, /* Logitech QuickCam Pro 3000 */
+	{ USB_DEVICE(0x046D, 0x08B1) }, /* Logitech QuickCam Notebook Pro */
+	{ USB_DEVICE(0x046D, 0x08B2) }, /* Logitech QuickCam Pro 4000 */
+	{ USB_DEVICE(0x046D, 0x08B3) }, /* Logitech QuickCam Zoom (old model) */
+	{ USB_DEVICE(0x046D, 0x08B4) }, /* Logitech QuickCam Zoom (new model) */
+	{ USB_DEVICE(0x046D, 0x08B5) }, /* Logitech QuickCam Orbit/Sphere */
+	{ USB_DEVICE(0x046D, 0x08B6) }, /* Logitech (reserved) */
+	{ USB_DEVICE(0x046D, 0x08B7) }, /* Logitech (reserved) */
+	{ USB_DEVICE(0x046D, 0x08B8) }, /* Logitech (reserved) */
+	{ USB_DEVICE(0x055D, 0x9000) }, /* Samsung */
+	{ USB_DEVICE(0x055D, 0x9001) },
+	{ USB_DEVICE(0x041E, 0x400C) }, /* Creative Webcam 5 */
+	{ USB_DEVICE(0x041E, 0x4011) }, /* Creative Webcam Pro Ex */
+	{ USB_DEVICE(0x04CC, 0x8116) }, /* Afina Eye */
+	{ USB_DEVICE(0x06BE, 0x8116) }, /* new Afina Eye */
+	{ USB_DEVICE(0x0d81, 0x1910) }, /* Visionite */
+	{ USB_DEVICE(0x0d81, 0x1900) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, pwc_device_table);
+
+static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id);
+static void usb_pwc_disconnect(struct usb_interface *intf);
+
+static struct usb_driver pwc_driver = {
+	.name =			"Philips webcam",	/* name */
+	.id_table =		pwc_device_table,
+	.probe =		usb_pwc_probe,		/* probe() */
+	.disconnect =		usb_pwc_disconnect,	/* disconnect() */
+};
+
+#define MAX_DEV_HINTS	20
+#define MAX_ISOC_ERRORS	20
+
+static int default_size = PSZ_QCIF;
+static int default_fps = 10;
+static int default_fbufs = 3;   /* Default number of frame buffers */
+static int default_mbufs = 2;	/* Default number of mmap() buffers */
+       int pwc_trace = TRACE_MODULE | TRACE_FLOW | TRACE_PWCX;
+static int power_save = 0;
+static int led_on = 100, led_off = 0; /* defaults to LED that is on while in use */
+static int pwc_preferred_compression = 2; /* 0..3 = uncompressed..high */
+static struct {
+	int type;
+	char serial_number[30];
+	int device_node;
+	struct pwc_device *pdev;
+} device_hint[MAX_DEV_HINTS];
+
+/***/
+
+static int pwc_video_open(struct inode *inode, struct file *file);
+static int pwc_video_close(struct inode *inode, struct file *file);
+static ssize_t pwc_video_read(struct file *file, char __user * buf,
+			  size_t count, loff_t *ppos);
+static unsigned int pwc_video_poll(struct file *file, poll_table *wait);
+static int  pwc_video_ioctl(struct inode *inode, struct file *file,
+			    unsigned int ioctlnr, unsigned long arg);
+static int  pwc_video_mmap(struct file *file, struct vm_area_struct *vma);
+
+static struct file_operations pwc_fops = {
+	.owner =	THIS_MODULE,
+	.open =		pwc_video_open,
+	.release =     	pwc_video_close,
+	.read =		pwc_video_read,
+	.poll =		pwc_video_poll,
+	.mmap =		pwc_video_mmap,
+	.ioctl =        pwc_video_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.llseek =       no_llseek,
+};
+static struct video_device pwc_template = {
+	.owner =	THIS_MODULE,
+	.name =		"Philips Webcam",	/* Filled in later */
+	.type =		VID_TYPE_CAPTURE,
+	.hardware =	VID_HARDWARE_PWC,
+	.release =	video_device_release,
+	.fops =         &pwc_fops,
+	.minor =        -1,
+};
+
+/***************************************************************************/
+
+/* Okay, this is some magic that I worked out and the reasoning behind it...
+
+   The biggest problem with any USB device is of course: "what to do
+   when the user unplugs the device while it is in use by an application?"
+   We have several options:
+   1) Curse them with the 7 plagues when they do (requires divine intervention)
+   2) Tell them not to (won't work: they'll do it anyway)
+   3) Oops the kernel (this will have a negative effect on a user's uptime)
+   4) Do something sensible.
+
+   Of course, we go for option 4.
+
+   It happens that this device will be linked to two times, once from
+   usb_device and once from the video_device in their respective 'private'
+   pointers. This is done when the device is probed() and all initialization
+   succeeded. The pwc_device struct links back to both structures.
+
+   When a device is unplugged while in use it will be removed from the
+   list of known USB devices; I also de-register it as a V4L device, but
+   unfortunately I can't free the memory since the struct is still in use
+   by the file descriptor. This free-ing is then deferend until the first
+   opportunity. Crude, but it works.
+
+   A small 'advantage' is that if a user unplugs the cam and plugs it back
+   in, it should get assigned the same video device minor, but unfortunately
+   it's non-trivial to re-link the cam back to the video device... (that
+   would surely be magic! :))
+*/
+
+/***************************************************************************/
+/* Private functions */
+
+/* Here we want the physical address of the memory.
+ * This is used when initializing the contents of the area.
+ */
+static inline unsigned long kvirt_to_pa(unsigned long adr)
+{
+	unsigned long kva, ret;
+
+	kva = (unsigned long) page_address(vmalloc_to_page((void *)adr));
+	kva |= adr & (PAGE_SIZE-1); /* restore the offset */
+	ret = __pa(kva);
+	return ret;
+}
+
+static void * rvmalloc(unsigned long size)
+{
+	void * mem;
+	unsigned long adr;
+
+	size=PAGE_ALIGN(size);
+	mem=vmalloc_32(size);
+	if (mem)
+	{
+		memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+		adr=(unsigned long) mem;
+		while (size > 0)
+		{
+			SetPageReserved(vmalloc_to_page((void *)adr));
+			adr+=PAGE_SIZE;
+			size-=PAGE_SIZE;
+		}
+	}
+	return mem;
+}
+
+static void rvfree(void * mem, unsigned long size)
+{
+	unsigned long adr;
+
+	if (mem)
+	{
+		adr=(unsigned long) mem;
+		while ((long) size > 0)
+		{
+			ClearPageReserved(vmalloc_to_page((void *)adr));
+			adr+=PAGE_SIZE;
+			size-=PAGE_SIZE;
+		}
+		vfree(mem);
+	}
+}
+
+
+
+
+static int pwc_allocate_buffers(struct pwc_device *pdev)
+{
+	int i;
+	void *kbuf;
+
+	Trace(TRACE_MEMORY, ">> pwc_allocate_buffers(pdev = 0x%p)\n", pdev);
+
+	if (pdev == NULL)
+		return -ENXIO;
+
+#ifdef PWC_MAGIC
+	if (pdev->magic != PWC_MAGIC) {
+		Err("allocate_buffers(): magic failed.\n");
+		return -ENXIO;
+	}
+#endif
+	/* Allocate Isochronous pipe buffers */
+	for (i = 0; i < MAX_ISO_BUFS; i++) {
+		if (pdev->sbuf[i].data == NULL) {
+			kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
+			if (kbuf == NULL) {
+				Err("Failed to allocate iso buffer %d.\n", i);
+				return -ENOMEM;
+			}
+			Trace(TRACE_MEMORY, "Allocated iso buffer at %p.\n", kbuf);
+			pdev->sbuf[i].data = kbuf;
+			memset(kbuf, 0, ISO_BUFFER_SIZE);
+		}
+	}
+
+	/* Allocate frame buffer structure */
+	if (pdev->fbuf == NULL) {
+		kbuf = kmalloc(default_fbufs * sizeof(struct pwc_frame_buf), GFP_KERNEL);
+		if (kbuf == NULL) {
+			Err("Failed to allocate frame buffer structure.\n");
+			return -ENOMEM;
+		}
+		Trace(TRACE_MEMORY, "Allocated frame buffer structure at %p.\n", kbuf);
+		pdev->fbuf = kbuf;
+		memset(kbuf, 0, default_fbufs * sizeof(struct pwc_frame_buf));
+	}
+	/* create frame buffers, and make circular ring */
+	for (i = 0; i < default_fbufs; i++) {
+		if (pdev->fbuf[i].data == NULL) {
+			kbuf = vmalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */
+			if (kbuf == NULL) {
+				Err("Failed to allocate frame buffer %d.\n", i);
+				return -ENOMEM;
+			}
+			Trace(TRACE_MEMORY, "Allocated frame buffer %d at %p.\n", i, kbuf);
+			pdev->fbuf[i].data = kbuf;
+			memset(kbuf, 128, PWC_FRAME_SIZE);
+		}
+	}
+
+	/* Allocate decompressor table space */
+	kbuf = NULL;
+	switch (pdev->type)
+	 {
+	  case 675:
+	  case 680:
+	  case 690:
+	  case 720:
+	  case 730:
+	  case 740:
+	  case 750:
+#if 0
+	    Trace(TRACE_MEMORY,"private_data(%zu)\n",sizeof(struct pwc_dec23_private));
+	    kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL);	/* Timon & Kiara */
+	    break;
+	  case 645:
+	  case 646:
+	    /* TODO & FIXME */
+	    kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL);
+	    break;
+#endif
+	;
+	 }
+	pdev->decompress_data = kbuf;
+
+	/* Allocate image buffer; double buffer for mmap() */
+	kbuf = rvmalloc(default_mbufs * pdev->len_per_image);
+	if (kbuf == NULL) {
+		Err("Failed to allocate image buffer(s). needed (%d)\n",default_mbufs * pdev->len_per_image);
+		return -ENOMEM;
+	}
+	Trace(TRACE_MEMORY, "Allocated image buffer at %p.\n", kbuf);
+	pdev->image_data = kbuf;
+	for (i = 0; i < default_mbufs; i++)
+		pdev->image_ptr[i] = kbuf + i * pdev->len_per_image;
+	for (; i < MAX_IMAGES; i++)
+		pdev->image_ptr[i] = NULL;
+
+	kbuf = NULL;
+
+	Trace(TRACE_MEMORY, "<< pwc_allocate_buffers()\n");
+	return 0;
+}
+
+static void pwc_free_buffers(struct pwc_device *pdev)
+{
+	int i;
+
+	Trace(TRACE_MEMORY, "Entering free_buffers(%p).\n", pdev);
+
+	if (pdev == NULL)
+		return;
+#ifdef PWC_MAGIC
+	if (pdev->magic != PWC_MAGIC) {
+		Err("free_buffers(): magic failed.\n");
+		return;
+	}
+#endif
+
+	/* Release Iso-pipe buffers */
+	for (i = 0; i < MAX_ISO_BUFS; i++)
+		if (pdev->sbuf[i].data != NULL) {
+			Trace(TRACE_MEMORY, "Freeing ISO buffer at %p.\n", pdev->sbuf[i].data);
+			kfree(pdev->sbuf[i].data);
+			pdev->sbuf[i].data = NULL;
+		}
+
+	/* The same for frame buffers */
+	if (pdev->fbuf != NULL) {
+		for (i = 0; i < default_fbufs; i++) {
+			if (pdev->fbuf[i].data != NULL) {
+				Trace(TRACE_MEMORY, "Freeing frame buffer %d at %p.\n", i, pdev->fbuf[i].data);
+				vfree(pdev->fbuf[i].data);
+				pdev->fbuf[i].data = NULL;
+			}
+		}
+		kfree(pdev->fbuf);
+		pdev->fbuf = NULL;
+	}
+
+	/* Intermediate decompression buffer & tables */
+	if (pdev->decompress_data != NULL) {
+		Trace(TRACE_MEMORY, "Freeing decompression buffer at %p.\n", pdev->decompress_data);
+		kfree(pdev->decompress_data);
+		pdev->decompress_data = NULL;
+	}
+	pdev->decompressor = NULL;
+
+	/* Release image buffers */
+	if (pdev->image_data != NULL) {
+		Trace(TRACE_MEMORY, "Freeing image buffer at %p.\n", pdev->image_data);
+		rvfree(pdev->image_data, default_mbufs * pdev->len_per_image);
+	}
+	pdev->image_data = NULL;
+
+	Trace(TRACE_MEMORY, "Leaving free_buffers().\n");
+}
+
+/* The frame & image buffer mess.
+
+   Yes, this is a mess. Well, it used to be simple, but alas...  In this
+   module, 3 buffers schemes are used to get the data from the USB bus to
+   the user program. The first scheme involves the ISO buffers (called thus
+   since they transport ISO data from the USB controller), and not really
+   interesting. Suffices to say the data from this buffer is quickly
+   gathered in an interrupt handler (pwc_isoc_handler) and placed into the
+   frame buffer.
+
+   The frame buffer is the second scheme, and is the central element here.
+   It collects the data from a single frame from the camera (hence, the
+   name). Frames are delimited by the USB camera with a short USB packet,
+   so that's easy to detect. The frame buffers form a list that is filled
+   by the camera+USB controller and drained by the user process through
+   either read() or mmap().
+
+   The image buffer is the third scheme, in which frames are decompressed
+   and converted into planar format. For mmap() there is more than
+   one image buffer available.
+
+   The frame buffers provide the image buffering. In case the user process
+   is a bit slow, this introduces lag and some undesired side-effects.
+   The problem arises when the frame buffer is full. I used to drop the last
+   frame, which makes the data in the queue stale very quickly. But dropping
+   the frame at the head of the queue proved to be a litte bit more difficult.
+   I tried a circular linked scheme, but this introduced more problems than
+   it solved.
+
+   Because filling and draining are completely asynchronous processes, this
+   requires some fiddling with pointers and mutexes.
+
+   Eventually, I came up with a system with 2 lists: an 'empty' frame list
+   and a 'full' frame list:
+     * Initially, all frame buffers but one are on the 'empty' list; the one
+       remaining buffer is our initial fill frame.
+     * If a frame is needed for filling, we try to take it from the 'empty'
+       list, unless that list is empty, in which case we take the buffer at
+       the head of the 'full' list.
+     * When our fill buffer has been filled, it is appended to the 'full'
+       list.
+     * If a frame is needed by read() or mmap(), it is taken from the head of
+       the 'full' list, handled, and then appended to the 'empty' list. If no
+       buffer is present on the 'full' list, we wait.
+   The advantage is that the buffer that is currently being decompressed/
+   converted, is on neither list, and thus not in our way (any other scheme
+   I tried had the problem of old data lingering in the queue).
+
+   Whatever strategy you choose, it always remains a tradeoff: with more
+   frame buffers the chances of a missed frame are reduced. On the other
+   hand, on slower machines it introduces lag because the queue will
+   always be full.
+ */
+
+/**
+  \brief Find next frame buffer to fill. Take from empty or full list, whichever comes first.
+ */
+static inline int pwc_next_fill_frame(struct pwc_device *pdev)
+{
+	int ret;
+	unsigned long flags;
+
+	ret = 0;
+	spin_lock_irqsave(&pdev->ptrlock, flags);
+	if (pdev->fill_frame != NULL) {
+		/* append to 'full' list */
+		if (pdev->full_frames == NULL) {
+			pdev->full_frames = pdev->fill_frame;
+			pdev->full_frames_tail = pdev->full_frames;
+		}
+		else {
+			pdev->full_frames_tail->next = pdev->fill_frame;
+			pdev->full_frames_tail = pdev->fill_frame;
+		}
+	}
+	if (pdev->empty_frames != NULL) {
+		/* We have empty frames available. That's easy */
+		pdev->fill_frame = pdev->empty_frames;
+		pdev->empty_frames = pdev->empty_frames->next;
+	}
+	else {
+		/* Hmm. Take it from the full list */
+#if PWC_DEBUG
+		/* sanity check */
+		if (pdev->full_frames == NULL) {
+			Err("Neither empty or full frames available!\n");
+			spin_unlock_irqrestore(&pdev->ptrlock, flags);
+			return -EINVAL;
+		}
+#endif
+		pdev->fill_frame = pdev->full_frames;
+		pdev->full_frames = pdev->full_frames->next;
+		ret = 1;
+	}
+	pdev->fill_frame->next = NULL;
+#if PWC_DEBUG
+	Trace(TRACE_SEQUENCE, "Assigning sequence number %d.\n", pdev->sequence);
+	pdev->fill_frame->sequence = pdev->sequence++;
+#endif
+	spin_unlock_irqrestore(&pdev->ptrlock, flags);
+	return ret;
+}
+
+
+/**
+  \brief Reset all buffers, pointers and lists, except for the image_used[] buffer.
+
+  If the image_used[] buffer is cleared too, mmap()/VIDIOCSYNC will run into trouble.
+ */
+static void pwc_reset_buffers(struct pwc_device *pdev)
+{
+	int i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdev->ptrlock, flags);
+	pdev->full_frames = NULL;
+	pdev->full_frames_tail = NULL;
+	for (i = 0; i < default_fbufs; i++) {
+		pdev->fbuf[i].filled = 0;
+		if (i > 0)
+			pdev->fbuf[i].next = &pdev->fbuf[i - 1];
+		else
+			pdev->fbuf->next = NULL;
+	}
+	pdev->empty_frames = &pdev->fbuf[default_fbufs - 1];
+	pdev->empty_frames_tail = pdev->fbuf;
+	pdev->read_frame = NULL;
+	pdev->fill_frame = pdev->empty_frames;
+	pdev->empty_frames = pdev->empty_frames->next;
+
+	pdev->image_read_pos = 0;
+	pdev->fill_image = 0;
+	spin_unlock_irqrestore(&pdev->ptrlock, flags);
+}
+
+
+/**
+  \brief Do all the handling for getting one frame: get pointer, decompress, advance pointers.
+ */
+static int pwc_handle_frame(struct pwc_device *pdev)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdev->ptrlock, flags);
+	/* First grab our read_frame; this is removed from all lists, so
+	   we can release the lock after this without problems */
+	if (pdev->read_frame != NULL) {
+		/* This can't theoretically happen */
+		Err("Huh? Read frame still in use?\n");
+	}
+	else {
+		if (pdev->full_frames == NULL) {
+			Err("Woops. No frames ready.\n");
+		}
+		else {
+			pdev->read_frame = pdev->full_frames;
+			pdev->full_frames = pdev->full_frames->next;
+			pdev->read_frame->next = NULL;
+		}
+
+		if (pdev->read_frame != NULL) {
+#if PWC_DEBUG
+			Trace(TRACE_SEQUENCE, "Decompressing frame %d\n", pdev->read_frame->sequence);
+#endif
+			/* Decompression is a lenghty process, so it's outside of the lock.
+			   This gives the isoc_handler the opportunity to fill more frames
+			   in the mean time.
+			*/
+			spin_unlock_irqrestore(&pdev->ptrlock, flags);
+			ret = pwc_decompress(pdev);
+			spin_lock_irqsave(&pdev->ptrlock, flags);
+
+			/* We're done with read_buffer, tack it to the end of the empty buffer list */
+			if (pdev->empty_frames == NULL) {
+				pdev->empty_frames = pdev->read_frame;
+				pdev->empty_frames_tail = pdev->empty_frames;
+			}
+			else {
+				pdev->empty_frames_tail->next = pdev->read_frame;
+				pdev->empty_frames_tail = pdev->read_frame;
+			}
+			pdev->read_frame = NULL;
+		}
+	}
+	spin_unlock_irqrestore(&pdev->ptrlock, flags);
+	return ret;
+}
+
+/**
+  \brief Advance pointers of image buffer (after each user request)
+*/
+static inline void pwc_next_image(struct pwc_device *pdev)
+{
+	pdev->image_used[pdev->fill_image] = 0;
+	pdev->fill_image = (pdev->fill_image + 1) % default_mbufs;
+}
+
+
+/* This gets called for the Isochronous pipe (video). This is done in
+ * interrupt time, so it has to be fast, not crash, and not stall. Neat.
+ */
+static void pwc_isoc_handler(struct urb *urb, struct pt_regs *regs)
+{
+	struct pwc_device *pdev;
+	int i, fst, flen;
+	int awake;
+	struct pwc_frame_buf *fbuf;
+	unsigned char *fillptr = NULL, *iso_buf = NULL;
+
+	awake = 0;
+	pdev = (struct pwc_device *)urb->context;
+	if (pdev == NULL) {
+		Err("isoc_handler() called with NULL device?!\n");
+		return;
+	}
+#ifdef PWC_MAGIC
+	if (pdev->magic != PWC_MAGIC) {
+		Err("isoc_handler() called with bad magic!\n");
+		return;
+	}
+#endif
+	if (urb->status == -ENOENT || urb->status == -ECONNRESET) {
+		Trace(TRACE_OPEN, "pwc_isoc_handler(): URB (%p) unlinked %ssynchronuously.\n", urb, urb->status == -ENOENT ? "" : "a");
+		return;
+	}
+	if (urb->status != -EINPROGRESS && urb->status != 0) {
+		const char *errmsg;
+
+		errmsg = "Unknown";
+		switch(urb->status) {
+			case -ENOSR:		errmsg = "Buffer error (overrun)"; break;
+			case -EPIPE:		errmsg = "Stalled (device not responding)"; break;
+			case -EOVERFLOW:	errmsg = "Babble (bad cable?)"; break;
+			case -EPROTO:		errmsg = "Bit-stuff error (bad cable?)"; break;
+			case -EILSEQ:		errmsg = "CRC/Timeout (could be anything)"; break;
+			case -ETIMEDOUT:	errmsg = "NAK (device does not respond)"; break;
+		}
+		Trace(TRACE_FLOW, "pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg);
+		/* Give up after a number of contiguous errors on the USB bus.
+		   Appearantly something is wrong so we simulate an unplug event.
+		 */
+		if (++pdev->visoc_errors > MAX_ISOC_ERRORS)
+		{
+			Info("Too many ISOC errors, bailing out.\n");
+			pdev->error_status = EIO;
+			awake = 1;
+			wake_up_interruptible(&pdev->frameq);
+		}
+		goto handler_end; // ugly, but practical
+	}
+
+	fbuf = pdev->fill_frame;
+	if (fbuf == NULL) {
+		Err("pwc_isoc_handler without valid fill frame.\n");
+		awake = 1;
+		goto handler_end;
+	}
+	else {
+		fillptr = fbuf->data + fbuf->filled;
+	}
+
+	/* Reset ISOC error counter. We did get here, after all. */
+	pdev->visoc_errors = 0;
+
+	/* vsync: 0 = don't copy data
+		  1 = sync-hunt
+		  2 = synched
+	 */
+	/* Compact data */
+	for (i = 0; i < urb->number_of_packets; i++) {
+		fst  = urb->iso_frame_desc[i].status;
+		flen = urb->iso_frame_desc[i].actual_length;
+		iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+		if (fst == 0) {
+			if (flen > 0) { /* if valid data... */
+				if (pdev->vsync > 0) { /* ...and we are not sync-hunting... */
+					pdev->vsync = 2;
+
+					/* ...copy data to frame buffer, if possible */
+					if (flen + fbuf->filled > pdev->frame_total_size) {
+						Trace(TRACE_FLOW, "Frame buffer overflow (flen = %d, frame_total_size = %d).\n", flen, pdev->frame_total_size);
+						pdev->vsync = 0; /* Hmm, let's wait for an EOF (end-of-frame) */
+						pdev->vframes_error++;
+					}
+					else {
+						memmove(fillptr, iso_buf, flen);
+						fillptr += flen;
+					}
+				}
+				fbuf->filled += flen;
+			} /* ..flen > 0 */
+
+			if (flen < pdev->vlast_packet_size) {
+				/* Shorter packet... We probably have the end of an image-frame;
+				   wake up read() process and let select()/poll() do something.
+				   Decompression is done in user time over there.
+				 */
+				if (pdev->vsync == 2) {
+					/* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus
+					   frames on the USB wire after an exposure change. This conditition is
+					   however detected  in the cam and a bit is set in the header.
+					 */
+					if (pdev->type == 730) {
+						unsigned char *ptr = (unsigned char *)fbuf->data;
+
+						if (ptr[1] == 1 && ptr[0] & 0x10) {
+#if PWC_DEBUG
+							Debug("Hyundai CMOS sensor bug. Dropping frame %d.\n", fbuf->sequence);
+#endif
+							pdev->drop_frames += 2;
+							pdev->vframes_error++;
+						}
+						if ((ptr[0] ^ pdev->vmirror) & 0x01) {
+							if (ptr[0] & 0x01)
+								Info("Snapshot button pressed.\n");
+							else
+								Info("Snapshot button released.\n");
+						}
+						if ((ptr[0] ^ pdev->vmirror) & 0x02) {
+							if (ptr[0] & 0x02)
+								Info("Image is mirrored.\n");
+							else
+								Info("Image is normal.\n");
+						}
+						pdev->vmirror = ptr[0] & 0x03;
+						/* Sometimes the trailer of the 730 is still sent as a 4 byte packet
+						   after a short frame; this condition is filtered out specifically. A 4 byte
+						   frame doesn't make sense anyway.
+						   So we get either this sequence:
+							drop_bit set -> 4 byte frame -> short frame -> good frame
+						   Or this one:
+							drop_bit set -> short frame -> good frame
+						   So we drop either 3 or 2 frames in all!
+						 */
+						if (fbuf->filled == 4)
+							pdev->drop_frames++;
+					}
+
+					/* In case we were instructed to drop the frame, do so silently.
+					   The buffer pointers are not updated either (but the counters are reset below).
+					 */
+					if (pdev->drop_frames > 0)
+						pdev->drop_frames--;
+					else {
+						/* Check for underflow first */
+						if (fbuf->filled < pdev->frame_total_size) {
+							Trace(TRACE_FLOW, "Frame buffer underflow (%d bytes); discarded.\n", fbuf->filled);
+							pdev->vframes_error++;
+						}
+						else {
+							/* Send only once per EOF */
+							awake = 1; /* delay wake_ups */
+
+							/* Find our next frame to fill. This will always succeed, since we
+							 * nick a frame from either empty or full list, but if we had to
+							 * take it from the full list, it means a frame got dropped.
+							 */
+							if (pwc_next_fill_frame(pdev)) {
+								pdev->vframes_dumped++;
+								if ((pdev->vframe_count > FRAME_LOWMARK) && (pwc_trace & TRACE_FLOW)) {
+									if (pdev->vframes_dumped < 20)
+										Trace(TRACE_FLOW, "Dumping frame %d.\n", pdev->vframe_count);
+									if (pdev->vframes_dumped == 20)
+										Trace(TRACE_FLOW, "Dumping frame %d (last message).\n", pdev->vframe_count);
+								}
+							}
+							fbuf = pdev->fill_frame;
+						}
+					} /* !drop_frames */
+					pdev->vframe_count++;
+				}
+				fbuf->filled = 0;
+				fillptr = fbuf->data;
+				pdev->vsync = 1;
+			} /* .. flen < last_packet_size */
+			pdev->vlast_packet_size = flen;
+		} /* ..status == 0 */
+#if PWC_DEBUG
+		/* This is normally not interesting to the user, unless you are really debugging something */
+		else {
+			static int iso_error = 0;
+			iso_error++;
+			if (iso_error < 20)
+				Trace(TRACE_FLOW, "Iso frame %d of USB has error %d\n", i, fst);
+		}
+#endif
+	}
+
+handler_end:
+	if (awake)
+		wake_up_interruptible(&pdev->frameq);
+
+	urb->dev = pdev->udev;
+	i = usb_submit_urb(urb, GFP_ATOMIC);
+	if (i != 0)
+		Err("Error (%d) re-submitting urb in pwc_isoc_handler.\n", i);
+}
+
+
+static int pwc_isoc_init(struct pwc_device *pdev)
+{
+	struct usb_device *udev;
+	struct urb *urb;
+	int i, j, ret;
+
+	struct usb_interface *intf;
+	struct usb_host_interface *idesc = NULL;
+
+	if (pdev == NULL)
+		return -EFAULT;
+	if (pdev->iso_init)
+		return 0;
+	pdev->vsync = 0;
+	udev = pdev->udev;
+
+	/* Get the current alternate interface, adjust packet size */
+	if (!udev->actconfig)
+		return -EFAULT;
+
+	intf = usb_ifnum_to_if(udev, 0);
+	if (intf)
+		idesc = usb_altnum_to_altsetting(intf, pdev->valternate);
+
+	if (!idesc)
+		return -EFAULT;
+
+	/* Search video endpoint */
+	pdev->vmax_packet_size = -1;
+	for (i = 0; i < idesc->desc.bNumEndpoints; i++)
+		if ((idesc->endpoint[i].desc.bEndpointAddress & 0xF) == pdev->vendpoint) {
+			pdev->vmax_packet_size = le16_to_cpu(idesc->endpoint[i].desc.wMaxPacketSize);
+			break;
+		}
+
+	if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) {
+		Err("Failed to find packet size for video endpoint in current alternate setting.\n");
+		return -ENFILE; /* Odd error, that should be noticeable */
+	}
+
+	/* Set alternate interface */
+	ret = 0;
+	Trace(TRACE_OPEN, "Setting alternate interface %d\n", pdev->valternate);
+	ret = usb_set_interface(pdev->udev, 0, pdev->valternate);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < MAX_ISO_BUFS; i++) {
+		urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
+		if (urb == NULL) {
+			Err("Failed to allocate urb %d\n", i);
+			ret = -ENOMEM;
+			break;
+		}
+		pdev->sbuf[i].urb = urb;
+		Trace(TRACE_MEMORY, "Allocated URB at 0x%p\n", urb);
+	}
+	if (ret) {
+		/* De-allocate in reverse order */
+		while (i >= 0) {
+			if (pdev->sbuf[i].urb != NULL)
+				usb_free_urb(pdev->sbuf[i].urb);
+			pdev->sbuf[i].urb = NULL;
+			i--;
+		}
+		return ret;
+	}
+
+	/* init URB structure */
+	for (i = 0; i < MAX_ISO_BUFS; i++) {
+		urb = pdev->sbuf[i].urb;
+
+		urb->interval = 1; // devik
+		urb->dev = udev;
+		urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->transfer_buffer = pdev->sbuf[i].data;
+		urb->transfer_buffer_length = ISO_BUFFER_SIZE;
+		urb->complete = pwc_isoc_handler;
+		urb->context = pdev;
+		urb->start_frame = 0;
+		urb->number_of_packets = ISO_FRAMES_PER_DESC;
+		for (j = 0; j < ISO_FRAMES_PER_DESC; j++) {
+			urb->iso_frame_desc[j].offset = j * ISO_MAX_FRAME_SIZE;
+			urb->iso_frame_desc[j].length = pdev->vmax_packet_size;
+		}
+	}
+
+	/* link */
+	for (i = 0; i < MAX_ISO_BUFS; i++) {
+		ret = usb_submit_urb(pdev->sbuf[i].urb, GFP_KERNEL);
+		if (ret)
+			Err("isoc_init() submit_urb %d failed with error %d\n", i, ret);
+		else
+			Trace(TRACE_MEMORY, "URB 0x%p submitted.\n", pdev->sbuf[i].urb);
+	}
+
+	/* All is done... */
+	pdev->iso_init = 1;
+	Trace(TRACE_OPEN, "<< pwc_isoc_init()\n");
+	return 0;
+}
+
+static void pwc_isoc_cleanup(struct pwc_device *pdev)
+{
+	int i;
+
+	Trace(TRACE_OPEN, ">> pwc_isoc_cleanup()\n");
+	if (pdev == NULL)
+		return;
+
+	/* Unlinking ISOC buffers one by one */
+	for (i = 0; i < MAX_ISO_BUFS; i++) {
+		struct urb *urb;
+
+		urb = pdev->sbuf[i].urb;
+		if (urb != 0) {
+			if (pdev->iso_init) {
+				Trace(TRACE_MEMORY, "Unlinking URB %p\n", urb);
+				usb_kill_urb(urb);
+			}
+			Trace(TRACE_MEMORY, "Freeing URB\n");
+			usb_free_urb(urb);
+			pdev->sbuf[i].urb = NULL;
+		}
+	}
+
+	/* Stop camera, but only if we are sure the camera is still there (unplug
+	   is signalled by EPIPE)
+	 */
+	if (pdev->error_status && pdev->error_status != EPIPE) {
+		Trace(TRACE_OPEN, "Setting alternate interface 0.\n");
+		usb_set_interface(pdev->udev, 0, 0);
+	}
+
+	pdev->iso_init = 0;
+	Trace(TRACE_OPEN, "<< pwc_isoc_cleanup()\n");
+}
+
+int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot)
+{
+	int ret, start;
+
+	/* Stop isoc stuff */
+	pwc_isoc_cleanup(pdev);
+	/* Reset parameters */
+	pwc_reset_buffers(pdev);
+	/* Try to set video mode... */
+	start = ret = pwc_set_video_mode(pdev, width, height, new_fps, new_compression, new_snapshot);
+	if (ret) {
+		Trace(TRACE_FLOW, "pwc_set_video_mode attempt 1 failed.\n");
+		/* That failed... restore old mode (we know that worked) */
+		start = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
+		if (start) {
+			Trace(TRACE_FLOW, "pwc_set_video_mode attempt 2 failed.\n");
+		}
+	}
+	if (start == 0)
+	{
+		if (pwc_isoc_init(pdev) < 0)
+		{
+			Info("Failed to restart ISOC transfers in pwc_try_video_mode.\n");
+			ret = -EAGAIN; /* let's try again, who knows if it works a second time */
+		}
+	}
+	pdev->drop_frames++; /* try to avoid garbage during switch */
+	return ret; /* Return original error code */
+}
+
+
+/***************************************************************************/
+/* Video4Linux functions */
+
+static int pwc_video_open(struct inode *inode, struct file *file)
+{
+	int i;
+	struct video_device *vdev = video_devdata(file);
+	struct pwc_device *pdev;
+
+	Trace(TRACE_OPEN, ">> video_open called(vdev = 0x%p).\n", vdev);
+
+	pdev = (struct pwc_device *)vdev->priv;
+	if (pdev == NULL)
+		BUG();
+	if (pdev->vopen)
+		return -EBUSY;
+
+	down(&pdev->modlock);
+	if (!pdev->usb_init) {
+		Trace(TRACE_OPEN, "Doing first time initialization.\n");
+		pdev->usb_init = 1;
+
+		if (pwc_trace & TRACE_OPEN)
+		{
+			/* Query sensor type */
+			const char *sensor_type = NULL;
+			int ret;
+
+			ret = pwc_get_cmos_sensor(pdev, &i);
+			if (ret >= 0)
+			{
+				switch(i) {
+				case 0x00:  sensor_type = "Hyundai CMOS sensor"; break;
+				case 0x20:  sensor_type = "Sony CCD sensor + TDA8787"; break;
+				case 0x2E:  sensor_type = "Sony CCD sensor + Exas 98L59"; break;
+				case 0x2F:  sensor_type = "Sony CCD sensor + ADI 9804"; break;
+				case 0x30:  sensor_type = "Sharp CCD sensor + TDA8787"; break;
+				case 0x3E:  sensor_type = "Sharp CCD sensor + Exas 98L59"; break;
+				case 0x3F:  sensor_type = "Sharp CCD sensor + ADI 9804"; break;
+				case 0x40:  sensor_type = "UPA 1021 sensor"; break;
+				case 0x100: sensor_type = "VGA sensor"; break;
+				case 0x101: sensor_type = "PAL MR sensor"; break;
+				default:    sensor_type = "unknown type of sensor"; break;
+				}
+			}
+			if (sensor_type != NULL)
+				Info("This %s camera is equipped with a %s (%d).\n", pdev->vdev->name, sensor_type, i);
+		}
+	}
+
+	/* Turn on camera */
+	if (power_save) {
+		i = pwc_camera_power(pdev, 1);
+		if (i < 0)
+			Info("Failed to restore power to the camera! (%d)\n", i);
+	}
+	/* Set LED on/off time */
+	if (pwc_set_leds(pdev, led_on, led_off) < 0)
+		Info("Failed to set LED on/off time.\n");
+
+	pwc_construct(pdev); /* set min/max sizes correct */
+
+	/* So far, so good. Allocate memory. */
+	i = pwc_allocate_buffers(pdev);
+	if (i < 0) {
+		Trace(TRACE_OPEN, "Failed to allocate buffer memory.\n");
+		up(&pdev->modlock);
+		return i;
+	}
+
+	/* Reset buffers & parameters */
+	pwc_reset_buffers(pdev);
+	for (i = 0; i < default_mbufs; i++)
+		pdev->image_used[i] = 0;
+	pdev->vframe_count = 0;
+	pdev->vframes_dumped = 0;
+	pdev->vframes_error = 0;
+	pdev->visoc_errors = 0;
+	pdev->error_status = 0;
+#if PWC_DEBUG
+	pdev->sequence = 0;
+#endif
+	pwc_construct(pdev); /* set min/max sizes correct */
+
+	/* Set some defaults */
+	pdev->vsnapshot = 0;
+
+	/* Start iso pipe for video; first try the last used video size
+	   (or the default one); if that fails try QCIF/10 or QSIF/10;
+	   it that fails too, give up.
+	 */
+	i = pwc_set_video_mode(pdev, pwc_image_sizes[pdev->vsize].x, pwc_image_sizes[pdev->vsize].y, pdev->vframes, pdev->vcompression, 0);
+	if (i)	{
+		Trace(TRACE_OPEN, "First attempt at set_video_mode failed.\n");
+		if (pdev->type == 730 || pdev->type == 740 || pdev->type == 750)
+			i = pwc_set_video_mode(pdev, pwc_image_sizes[PSZ_QSIF].x, pwc_image_sizes[PSZ_QSIF].y, 10, pdev->vcompression, 0);
+		else
+			i = pwc_set_video_mode(pdev, pwc_image_sizes[PSZ_QCIF].x, pwc_image_sizes[PSZ_QCIF].y, 10, pdev->vcompression, 0);
+	}
+	if (i) {
+		Trace(TRACE_OPEN, "Second attempt at set_video_mode failed.\n");
+		up(&pdev->modlock);
+		return i;
+	}
+
+	i = pwc_isoc_init(pdev);
+	if (i) {
+		Trace(TRACE_OPEN, "Failed to init ISOC stuff = %d.\n", i);
+		up(&pdev->modlock);
+		return i;
+	}
+
+	pdev->vopen++;
+	file->private_data = vdev;
+	up(&pdev->modlock);
+	Trace(TRACE_OPEN, "<< video_open() returns 0.\n");
+	return 0;
+}
+
+/* Note that all cleanup is done in the reverse order as in _open */
+static int pwc_video_close(struct inode *inode, struct file *file)
+{
+	struct video_device *vdev = file->private_data;
+	struct pwc_device *pdev;
+	int i;
+
+	Trace(TRACE_OPEN, ">> video_close called(vdev = 0x%p).\n", vdev);
+
+	pdev = (struct pwc_device *)vdev->priv;
+	if (pdev->vopen == 0)
+		Info("video_close() called on closed device?\n");
+
+	/* Dump statistics, but only if a reasonable amount of frames were
+	   processed (to prevent endless log-entries in case of snap-shot
+	   programs)
+	 */
+	if (pdev->vframe_count > 20)
+		Info("Closing video device: %d frames received, dumped %d frames, %d frames with errors.\n", pdev->vframe_count, pdev->vframes_dumped, pdev->vframes_error);
+
+	switch (pdev->type)
+	 {
+	  case 675:
+	  case 680:
+	  case 690:
+	  case 720:
+	  case 730:
+	  case 740:
+	  case 750:
+/*	    pwc_dec23_exit();	*//* Timon & Kiara */
+	    break;
+	  case 645:
+	  case 646:
+/*	    pwc_dec1_exit(); */
+	    break;
+	 }
+
+	pwc_isoc_cleanup(pdev);
+	pwc_free_buffers(pdev);
+
+	/* Turn off LEDS and power down camera, but only when not unplugged */
+	if (pdev->error_status != EPIPE) {
+		/* Turn LEDs off */
+		if (pwc_set_leds(pdev, 0, 0) < 0)
+			Info("Failed to set LED on/off time.\n");
+		if (power_save) {
+			i = pwc_camera_power(pdev, 0);
+			if (i < 0)
+				Err("Failed to power down camera (%d)\n", i);
+		}
+	}
+	pdev->vopen = 0;
+	Trace(TRACE_OPEN, "<< video_close()\n");
+	return 0;
+}
+
+/*
+ *	FIXME: what about two parallel reads ????
+ *      ANSWER: Not supported. You can't open the device more than once,
+		despite what the V4L1 interface says. First, I don't see
+		the need, second there's no mechanism of alerting the
+		2nd/3rd/... process of events like changing image size.
+		And I don't see the point of blocking that for the
+		2nd/3rd/... process.
+		In multi-threaded environments reading parallel from any
+		device is tricky anyhow.
+ */
+
+static ssize_t pwc_video_read(struct file *file, char __user * buf,
+			  size_t count, loff_t *ppos)
+{
+	struct video_device *vdev = file->private_data;
+	struct pwc_device *pdev;
+	int noblock = file->f_flags & O_NONBLOCK;
+	DECLARE_WAITQUEUE(wait, current);
+	int bytes_to_read;
+
+	Trace(TRACE_READ, "video_read(0x%p, %p, %zu) called.\n", vdev, buf, count);
+	if (vdev == NULL)
+		return -EFAULT;
+	pdev = vdev->priv;
+	if (pdev == NULL)
+		return -EFAULT;
+	if (pdev->error_status)
+		return -pdev->error_status; /* Something happened, report what. */
+
+	/* In case we're doing partial reads, we don't have to wait for a frame */
+	if (pdev->image_read_pos == 0) {
+		/* Do wait queueing according to the (doc)book */
+		add_wait_queue(&pdev->frameq, &wait);
+		while (pdev->full_frames == NULL) {
+			/* Check for unplugged/etc. here */
+			if (pdev->error_status) {
+				remove_wait_queue(&pdev->frameq, &wait);
+				set_current_state(TASK_RUNNING);
+				return -pdev->error_status ;
+			}
+			if (noblock) {
+				remove_wait_queue(&pdev->frameq, &wait);
+				set_current_state(TASK_RUNNING);
+				return -EWOULDBLOCK;
+			}
+			if (signal_pending(current)) {
+				remove_wait_queue(&pdev->frameq, &wait);
+				set_current_state(TASK_RUNNING);
+				return -ERESTARTSYS;
+			}
+			schedule();
+			set_current_state(TASK_INTERRUPTIBLE);
+		}
+		remove_wait_queue(&pdev->frameq, &wait);
+		set_current_state(TASK_RUNNING);
+
+		/* Decompress and release frame */
+		if (pwc_handle_frame(pdev))
+			return -EFAULT;
+	}
+
+	Trace(TRACE_READ, "Copying data to user space.\n");
+	if (pdev->vpalette == VIDEO_PALETTE_RAW)
+		bytes_to_read = pdev->frame_size;
+	else
+		bytes_to_read = pdev->view.size;
+
+	/* copy bytes to user space; we allow for partial reads */
+	if (count + pdev->image_read_pos > bytes_to_read)
+		count = bytes_to_read - pdev->image_read_pos;
+	if (copy_to_user(buf, pdev->image_ptr[pdev->fill_image] + pdev->image_read_pos, count))
+		return -EFAULT;
+	pdev->image_read_pos += count;
+	if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */
+		pdev->image_read_pos = 0;
+		pwc_next_image(pdev);
+	}
+	return count;
+}
+
+static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
+{
+	struct video_device *vdev = file->private_data;
+	struct pwc_device *pdev;
+
+	if (vdev == NULL)
+		return -EFAULT;
+	pdev = vdev->priv;
+	if (pdev == NULL)
+		return -EFAULT;
+
+	poll_wait(file, &pdev->frameq, wait);
+	if (pdev->error_status)
+		return POLLERR;
+	if (pdev->full_frames != NULL) /* we have frames waiting */
+		return (POLLIN | POLLRDNORM);
+
+	return 0;
+}
+
+static int pwc_video_do_ioctl(struct inode *inode, struct file *file,
+			      unsigned int cmd, void *arg)
+{
+	struct video_device *vdev = file->private_data;
+	struct pwc_device *pdev;
+	DECLARE_WAITQUEUE(wait, current);
+
+	if (vdev == NULL)
+		return -EFAULT;
+	pdev = vdev->priv;
+	if (pdev == NULL)
+		return -EFAULT;
+
+	switch (cmd) {
+		/* Query cabapilities */
+		case VIDIOCGCAP:
+		{
+			struct video_capability *caps = arg;
+
+			strcpy(caps->name, vdev->name);
+			caps->type = VID_TYPE_CAPTURE;
+			caps->channels = 1;
+			caps->audios = 1;
+			caps->minwidth  = pdev->view_min.x;
+			caps->minheight = pdev->view_min.y;
+			caps->maxwidth  = pdev->view_max.x;
+			caps->maxheight = pdev->view_max.y;
+			break;
+		}
+
+		/* Channel functions (simulate 1 channel) */
+		case VIDIOCGCHAN:
+		{
+			struct video_channel *v = arg;
+
+			if (v->channel != 0)
+				return -EINVAL;
+			v->flags = 0;
+			v->tuners = 0;
+			v->type = VIDEO_TYPE_CAMERA;
+			strcpy(v->name, "Webcam");
+			return 0;
+		}
+
+		case VIDIOCSCHAN:
+		{
+			/* The spec says the argument is an integer, but
+			   the bttv driver uses a video_channel arg, which
+			   makes sense becasue it also has the norm flag.
+			 */
+			struct video_channel *v = arg;
+			if (v->channel != 0)
+				return -EINVAL;
+			return 0;
+		}
+
+
+		/* Picture functions; contrast etc. */
+		case VIDIOCGPICT:
+		{
+			struct video_picture *p = arg;
+			int val;
+
+			val = pwc_get_brightness(pdev);
+			if (val >= 0)
+				p->brightness = val;
+			else
+				p->brightness = 0xffff;
+			val = pwc_get_contrast(pdev);
+			if (val >= 0)
+				p->contrast = val;
+			else
+				p->contrast = 0xffff;
+			/* Gamma, Whiteness, what's the difference? :) */
+			val = pwc_get_gamma(pdev);
+			if (val >= 0)
+				p->whiteness = val;
+			else
+				p->whiteness = 0xffff;
+			val = pwc_get_saturation(pdev);
+			if (val >= 0)
+				p->colour = val;
+			else
+				p->colour = 0xffff;
+			p->depth = 24;
+			p->palette = pdev->vpalette;
+			p->hue = 0xFFFF; /* N/A */
+			break;
+		}
+
+		case VIDIOCSPICT:
+		{
+			struct video_picture *p = arg;
+			/*
+			 *	FIXME:	Suppose we are mid read
+				ANSWER: No problem: the firmware of the camera
+					can handle brightness/contrast/etc
+					changes at _any_ time, and the palette
+					is used exactly once in the uncompress
+					routine.
+			 */
+			pwc_set_brightness(pdev, p->brightness);
+			pwc_set_contrast(pdev, p->contrast);
+			pwc_set_gamma(pdev, p->whiteness);
+			pwc_set_saturation(pdev, p->colour);
+			if (p->palette && p->palette != pdev->vpalette) {
+				switch (p->palette) {
+					case VIDEO_PALETTE_YUV420P:
+					case VIDEO_PALETTE_RAW:
+						pdev->vpalette = p->palette;
+						return pwc_try_video_mode(pdev, pdev->image.x, pdev->image.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
+						break;
+					default:
+						return -EINVAL;
+						break;
+				}
+			}
+			break;
+		}
+
+		/* Window/size parameters */
+		case VIDIOCGWIN:
+		{
+			struct video_window *vw = arg;
+
+			vw->x = 0;
+			vw->y = 0;
+			vw->width = pdev->view.x;
+			vw->height = pdev->view.y;
+			vw->chromakey = 0;
+			vw->flags = (pdev->vframes << PWC_FPS_SHIFT) |
+				   (pdev->vsnapshot ? PWC_FPS_SNAPSHOT : 0);
+			break;
+		}
+
+		case VIDIOCSWIN:
+		{
+			struct video_window *vw = arg;
+			int fps, snapshot, ret;
+
+			fps = (vw->flags & PWC_FPS_FRMASK) >> PWC_FPS_SHIFT;
+			snapshot = vw->flags & PWC_FPS_SNAPSHOT;
+			if (fps == 0)
+				fps = pdev->vframes;
+			if (pdev->view.x == vw->width && pdev->view.y && fps == pdev->vframes && snapshot == pdev->vsnapshot)
+				return 0;
+			ret = pwc_try_video_mode(pdev, vw->width, vw->height, fps, pdev->vcompression, snapshot);
+			if (ret)
+				return ret;
+			break;
+		}
+
+		/* We don't have overlay support (yet) */
+		case VIDIOCGFBUF:
+		{
+			struct video_buffer *vb = arg;
+
+			memset(vb,0,sizeof(*vb));
+			break;
+		}
+
+		/* mmap() functions */
+		case VIDIOCGMBUF:
+		{
+			/* Tell the user program how much memory is needed for a mmap() */
+			struct video_mbuf *vm = arg;
+			int i;
+
+			memset(vm, 0, sizeof(*vm));
+			vm->size = default_mbufs * pdev->len_per_image;
+			vm->frames = default_mbufs; /* double buffering should be enough for most applications */
+			for (i = 0; i < default_mbufs; i++)
+				vm->offsets[i] = i * pdev->len_per_image;
+			break;
+		}
+
+		case VIDIOCMCAPTURE:
+		{
+			/* Start capture into a given image buffer (called 'frame' in video_mmap structure) */
+			struct video_mmap *vm = arg;
+
+			Trace(TRACE_READ, "VIDIOCMCAPTURE: %dx%d, frame %d, format %d\n", vm->width, vm->height, vm->frame, vm->format);
+			if (vm->frame < 0 || vm->frame >= default_mbufs)
+				return -EINVAL;
+
+			/* xawtv is nasty. It probes the available palettes
+			   by setting a very small image size and trying
+			   various palettes... The driver doesn't support
+			   such small images, so I'm working around it.
+			 */
+			if (vm->format)
+			{
+				switch (vm->format)
+				{
+					case VIDEO_PALETTE_YUV420P:
+					case VIDEO_PALETTE_RAW:
+						break;
+					default:
+						return -EINVAL;
+						break;
+				}
+			}
+
+			if ((vm->width != pdev->view.x || vm->height != pdev->view.y) &&
+			    (vm->width >= pdev->view_min.x && vm->height >= pdev->view_min.y)) {
+				int ret;
+
+				Trace(TRACE_OPEN, "VIDIOCMCAPTURE: changing size to please xawtv :-(.\n");
+				ret = pwc_try_video_mode(pdev, vm->width, vm->height, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
+				if (ret)
+					return ret;
+			} /* ... size mismatch */
+
+			/* FIXME: should we lock here? */
+			if (pdev->image_used[vm->frame])
+				return -EBUSY;	/* buffer wasn't available. Bummer */
+			pdev->image_used[vm->frame] = 1;
+
+			/* Okay, we're done here. In the SYNC call we wait until a
+			   frame comes available, then expand image into the given
+			   buffer.
+			   In contrast to the CPiA cam the Philips cams deliver a
+			   constant stream, almost like a grabber card. Also,
+			   we have separate buffers for the rawdata and the image,
+			   meaning we can nearly always expand into the requested buffer.
+			 */
+			Trace(TRACE_READ, "VIDIOCMCAPTURE done.\n");
+			break;
+		}
+
+		case VIDIOCSYNC:
+		{
+			/* The doc says: "Whenever a buffer is used it should
+			   call VIDIOCSYNC to free this frame up and continue."
+
+			   The only odd thing about this whole procedure is
+			   that MCAPTURE flags the buffer as "in use", and
+			   SYNC immediately unmarks it, while it isn't
+			   after SYNC that you know that the buffer actually
+			   got filled! So you better not start a CAPTURE in
+			   the same frame immediately (use double buffering).
+			   This is not a problem for this cam, since it has
+			   extra intermediate buffers, but a hardware
+			   grabber card will then overwrite the buffer
+			   you're working on.
+			 */
+			int *mbuf = arg;
+			int ret;
+
+			Trace(TRACE_READ, "VIDIOCSYNC called (%d).\n", *mbuf);
+
+			/* bounds check */
+			if (*mbuf < 0 || *mbuf >= default_mbufs)
+				return -EINVAL;
+			/* check if this buffer was requested anyway */
+			if (pdev->image_used[*mbuf] == 0)
+				return -EINVAL;
+
+			/* Add ourselves to the frame wait-queue.
+
+			   FIXME: needs auditing for safety.
+			   QUESTION: In what respect? I think that using the
+				     frameq is safe now.
+			 */
+			add_wait_queue(&pdev->frameq, &wait);
+			while (pdev->full_frames == NULL) {
+				if (pdev->error_status) {
+					remove_wait_queue(&pdev->frameq, &wait);
+					set_current_state(TASK_RUNNING);
+					return -pdev->error_status;
+				}
+
+				if (signal_pending(current)) {
+					remove_wait_queue(&pdev->frameq, &wait);
+					set_current_state(TASK_RUNNING);
+					return -ERESTARTSYS;
+				}
+				schedule();
+				set_current_state(TASK_INTERRUPTIBLE);
+			}
+			remove_wait_queue(&pdev->frameq, &wait);
+			set_current_state(TASK_RUNNING);
+
+			/* The frame is ready. Expand in the image buffer
+			   requested by the user. I don't care if you
+			   mmap() 5 buffers and request data in this order:
+			   buffer 4 2 3 0 1 2 3 0 4 3 1 . . .
+			   Grabber hardware may not be so forgiving.
+			 */
+			Trace(TRACE_READ, "VIDIOCSYNC: frame ready.\n");
+			pdev->fill_image = *mbuf; /* tell in which buffer we want the image to be expanded */
+			/* Decompress, etc */
+			ret = pwc_handle_frame(pdev);
+			pdev->image_used[*mbuf] = 0;
+			if (ret)
+				return -EFAULT;
+			break;
+		}
+
+		case VIDIOCGAUDIO:
+		{
+			struct video_audio *v = arg;
+
+			strcpy(v->name, "Microphone");
+			v->audio = -1; /* unknown audio minor */
+			v->flags = 0;
+			v->mode = VIDEO_SOUND_MONO;
+			v->volume = 0;
+			v->bass = 0;
+			v->treble = 0;
+			v->balance = 0x8000;
+			v->step = 1;
+			break;
+		}
+
+		case VIDIOCSAUDIO:
+		{
+			/* Dummy: nothing can be set */
+			break;
+		}
+
+		case VIDIOCGUNIT:
+		{
+			struct video_unit *vu = arg;
+
+			vu->video = pdev->vdev->minor & 0x3F;
+			vu->audio = -1; /* not known yet */
+			vu->vbi = -1;
+			vu->radio = -1;
+			vu->teletext = -1;
+			break;
+		}
+		default:
+			return pwc_ioctl(pdev, cmd, arg);
+	} /* ..switch */
+	return 0;
+}
+
+static int pwc_video_ioctl(struct inode *inode, struct file *file,
+			   unsigned int cmd, unsigned long arg)
+{
+	return video_usercopy(inode, file, cmd, arg, pwc_video_do_ioctl);
+}
+
+
+static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *vdev = file->private_data;
+	struct pwc_device *pdev;
+	unsigned long start = vma->vm_start;
+	unsigned long size  = vma->vm_end-vma->vm_start;
+	unsigned long page, pos;
+
+	Trace(TRACE_MEMORY, "mmap(0x%p, 0x%lx, %lu) called.\n", vdev, start, size);
+	pdev = vdev->priv;
+
+	vma->vm_flags |= VM_IO;
+
+	pos = (unsigned long)pdev->image_data;
+	while (size > 0) {
+		page = vmalloc_to_pfn((void *)pos);
+		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+			return -EAGAIN;
+
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		if (size > PAGE_SIZE)
+			size -= PAGE_SIZE;
+		else
+			size = 0;
+	}
+
+	return 0;
+}
+
+/***************************************************************************/
+/* USB functions */
+
+/* This function gets called when a new device is plugged in or the usb core
+ * is loaded.
+ */
+
+static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct pwc_device *pdev = NULL;
+	int vendor_id, product_id, type_id;
+	int i, hint;
+	int features = 0;
+	int video_nr = -1; /* default: use next available device */
+	char serial_number[30], *name;
+
+	/* Check if we can handle this device */
+	Trace(TRACE_PROBE, "probe() called [%04X %04X], if %d\n",
+		le16_to_cpu(udev->descriptor.idVendor),
+		le16_to_cpu(udev->descriptor.idProduct),
+		intf->altsetting->desc.bInterfaceNumber);
+
+	/* the interfaces are probed one by one. We are only interested in the
+	   video interface (0) now.
+	   Interface 1 is the Audio Control, and interface 2 Audio itself.
+	 */
+	if (intf->altsetting->desc.bInterfaceNumber > 0)
+		return -ENODEV;
+
+	vendor_id = le16_to_cpu(udev->descriptor.idVendor);
+	product_id = le16_to_cpu(udev->descriptor.idProduct);
+
+	if (vendor_id == 0x0471) {
+		switch (product_id) {
+		case 0x0302:
+			Info("Philips PCA645VC USB webcam detected.\n");
+			name = "Philips 645 webcam";
+			type_id = 645;
+			break;
+		case 0x0303:
+			Info("Philips PCA646VC USB webcam detected.\n");
+			name = "Philips 646 webcam";
+			type_id = 646;
+			break;
+		case 0x0304:
+			Info("Askey VC010 type 2 USB webcam detected.\n");
+			name = "Askey VC010 webcam";
+			type_id = 646;
+			break;
+		case 0x0307:
+			Info("Philips PCVC675K (Vesta) USB webcam detected.\n");
+			name = "Philips 675 webcam";
+			type_id = 675;
+			break;
+		case 0x0308:
+			Info("Philips PCVC680K (Vesta Pro) USB webcam detected.\n");
+			name = "Philips 680 webcam";
+			type_id = 680;
+			break;
+		case 0x030C:
+			Info("Philips PCVC690K (Vesta Pro Scan) USB webcam detected.\n");
+			name = "Philips 690 webcam";
+			type_id = 690;
+			break;
+		case 0x0310:
+			Info("Philips PCVC730K (ToUCam Fun)/PCVC830 (ToUCam II) USB webcam detected.\n");
+			name = "Philips 730 webcam";
+			type_id = 730;
+			break;
+		case 0x0311:
+			Info("Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.\n");
+			name = "Philips 740 webcam";
+			type_id = 740;
+			break;
+		case 0x0312:
+			Info("Philips PCVC750K (ToUCam Pro Scan) USB webcam detected.\n");
+			name = "Philips 750 webcam";
+			type_id = 750;
+			break;
+		case 0x0313:
+			Info("Philips PCVC720K/40 (ToUCam XS) USB webcam detected.\n");
+			name = "Philips 720K/40 webcam";
+			type_id = 720;
+			break;
+		default:
+			return -ENODEV;
+			break;
+		}
+	}
+	else if (vendor_id == 0x069A) {
+		switch(product_id) {
+		case 0x0001:
+			Info("Askey VC010 type 1 USB webcam detected.\n");
+			name = "Askey VC010 webcam";
+			type_id = 645;
+			break;
+		default:
+			return -ENODEV;
+			break;
+		}
+	}
+	else if (vendor_id == 0x046d) {
+		switch(product_id) {
+		case 0x08b0:
+			Info("Logitech QuickCam Pro 3000 USB webcam detected.\n");
+			name = "Logitech QuickCam Pro 3000";
+			type_id = 740; /* CCD sensor */
+			break;
+		case 0x08b1:
+			Info("Logitech QuickCam Notebook Pro USB webcam detected.\n");
+			name = "Logitech QuickCam Notebook Pro";
+			type_id = 740; /* CCD sensor */
+			break;
+		case 0x08b2:
+			Info("Logitech QuickCam 4000 Pro USB webcam detected.\n");
+			name = "Logitech QuickCam Pro 4000";
+			type_id = 740; /* CCD sensor */
+			break;
+		case 0x08b3:
+			Info("Logitech QuickCam Zoom USB webcam detected.\n");
+			name = "Logitech QuickCam Zoom";
+			type_id = 740; /* CCD sensor */
+			break;
+		case 0x08B4:
+			Info("Logitech QuickCam Zoom (new model) USB webcam detected.\n");
+			name = "Logitech QuickCam Zoom";
+			type_id = 740; /* CCD sensor */
+			break;
+		case 0x08b5:
+			Info("Logitech QuickCam Orbit/Sphere USB webcam detected.\n");
+			name = "Logitech QuickCam Orbit";
+			type_id = 740; /* CCD sensor */
+			features |= FEATURE_MOTOR_PANTILT;
+			break;
+		case 0x08b6:
+		case 0x08b7:
+		case 0x08b8:
+			Info("Logitech QuickCam detected (reserved ID).\n");
+			name = "Logitech QuickCam (res.)";
+			type_id = 730; /* Assuming CMOS */
+			break;
+		default:
+			return -ENODEV;
+			break;
+		}
+	}
+	else if (vendor_id == 0x055d) {
+		/* I don't know the difference between the C10 and the C30;
+		   I suppose the difference is the sensor, but both cameras
+		   work equally well with a type_id of 675
+		 */
+		switch(product_id) {
+		case 0x9000:
+			Info("Samsung MPC-C10 USB webcam detected.\n");
+			name = "Samsung MPC-C10";
+			type_id = 675;
+			break;
+		case 0x9001:
+			Info("Samsung MPC-C30 USB webcam detected.\n");
+			name = "Samsung MPC-C30";
+			type_id = 675;
+			break;
+		default:
+			return -ENODEV;
+			break;
+		}
+	}
+	else if (vendor_id == 0x041e) {
+		switch(product_id) {
+		case 0x400c:
+			Info("Creative Labs Webcam 5 detected.\n");
+			name = "Creative Labs Webcam 5";
+			type_id = 730;
+			break;
+		case 0x4011:
+			Info("Creative Labs Webcam Pro Ex detected.\n");
+			name = "Creative Labs Webcam Pro Ex";
+			type_id = 740;
+			break;
+		default:
+			return -ENODEV;
+			break;
+		}
+	}
+	else if (vendor_id == 0x04cc) {
+		switch(product_id) {
+		case 0x8116:
+			Info("Sotec Afina Eye USB webcam detected.\n");
+			name = "Sotec Afina Eye";
+			type_id = 730;
+			break;
+		default:
+			return -ENODEV;
+			break;
+		}
+	}
+	else if (vendor_id == 0x06be) {
+		switch(product_id) {
+		case 0x8116:
+			/* This is essentially the same cam as the Sotec Afina Eye */
+			Info("AME Co. Afina Eye USB webcam detected.\n");
+			name = "AME Co. Afina Eye";
+			type_id = 750;
+			break;
+		default:
+			return -ENODEV;
+			break;
+		}
+
+	}
+	else if (vendor_id == 0x0d81) {
+		switch(product_id) {
+		case 0x1900:
+			Info("Visionite VCS-UC300 USB webcam detected.\n");
+			name = "Visionite VCS-UC300";
+			type_id = 740; /* CCD sensor */
+			break;
+		case 0x1910:
+			Info("Visionite VCS-UM100 USB webcam detected.\n");
+			name = "Visionite VCS-UM100";
+			type_id = 730; /* CMOS sensor */
+			break;
+		default:
+			return -ENODEV;
+			break;
+		}
+	}
+	else
+		return -ENODEV; /* Not any of the know types; but the list keeps growing. */
+
+	memset(serial_number, 0, 30);
+	usb_string(udev, udev->descriptor.iSerialNumber, serial_number, 29);
+	Trace(TRACE_PROBE, "Device serial number is %s\n", serial_number);
+
+	if (udev->descriptor.bNumConfigurations > 1)
+		Info("Warning: more than 1 configuration available.\n");
+
+	/* Allocate structure, initialize pointers, mutexes, etc. and link it to the usb_device */
+	pdev = kzalloc(sizeof(struct pwc_device), GFP_KERNEL);
+	if (pdev == NULL) {
+		Err("Oops, could not allocate memory for pwc_device.\n");
+		return -ENOMEM;
+	}
+	pdev->type = type_id;
+	pdev->vsize = default_size;
+	pdev->vframes = default_fps;
+	strcpy(pdev->serial, serial_number);
+	pdev->features = features;
+	if (vendor_id == 0x046D && product_id == 0x08B5)
+	{
+		/* Logitech QuickCam Orbit
+		   The ranges have been determined experimentally; they may differ from cam to cam.
+		   Also, the exact ranges left-right and up-down are different for my cam
+		  */
+		pdev->angle_range.pan_min  = -7000;
+		pdev->angle_range.pan_max  =  7000;
+		pdev->angle_range.tilt_min = -3000;
+		pdev->angle_range.tilt_max =  2500;
+	}
+
+	init_MUTEX(&pdev->modlock);
+	spin_lock_init(&pdev->ptrlock);
+
+	pdev->udev = udev;
+	init_waitqueue_head(&pdev->frameq);
+	pdev->vcompression = pwc_preferred_compression;
+
+	/* Allocate video_device structure */
+	pdev->vdev = video_device_alloc();
+	if (pdev->vdev == 0)
+	{
+		Err("Err, cannot allocate video_device struture. Failing probe.");
+		kfree(pdev);
+		return -ENOMEM;
+	}
+	memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template));
+	strcpy(pdev->vdev->name, name);
+	pdev->vdev->owner = THIS_MODULE;
+	video_set_drvdata(pdev->vdev, pdev);
+
+	pdev->release = le16_to_cpu(udev->descriptor.bcdDevice);
+	Trace(TRACE_PROBE, "Release: %04x\n", pdev->release);
+
+	/* Now search device_hint[] table for a match, so we can hint a node number. */
+	for (hint = 0; hint < MAX_DEV_HINTS; hint++) {
+		if (((device_hint[hint].type == -1) || (device_hint[hint].type == pdev->type)) &&
+		     (device_hint[hint].pdev == NULL)) {
+			/* so far, so good... try serial number */
+			if ((device_hint[hint].serial_number[0] == '*') || !strcmp(device_hint[hint].serial_number, serial_number)) {
+			    	/* match! */
+			    	video_nr = device_hint[hint].device_node;
+			    	Trace(TRACE_PROBE, "Found hint, will try to register as /dev/video%d\n", video_nr);
+			    	break;
+			}
+		}
+	}
+
+	pdev->vdev->release = video_device_release;
+	i = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr);
+	if (i < 0) {
+		Err("Failed to register as video device (%d).\n", i);
+		video_device_release(pdev->vdev); /* Drip... drip... drip... */
+		kfree(pdev); /* Oops, no memory leaks please */
+		return -EIO;
+	}
+	else {
+		Info("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F);
+	}
+
+	/* occupy slot */
+	if (hint < MAX_DEV_HINTS)
+		device_hint[hint].pdev = pdev;
+
+	Trace(TRACE_PROBE, "probe() function returning struct at 0x%p.\n", pdev);
+	usb_set_intfdata (intf, pdev);
+	return 0;
+}
+
+/* The user janked out the cable... */
+static void usb_pwc_disconnect(struct usb_interface *intf)
+{
+	struct pwc_device *pdev;
+	int hint;
+
+	lock_kernel();
+	pdev = usb_get_intfdata (intf);
+	usb_set_intfdata (intf, NULL);
+	if (pdev == NULL) {
+		Err("pwc_disconnect() Called without private pointer.\n");
+		goto disconnect_out;
+	}
+	if (pdev->udev == NULL) {
+		Err("pwc_disconnect() already called for %p\n", pdev);
+		goto disconnect_out;
+	}
+	if (pdev->udev != interface_to_usbdev(intf)) {
+		Err("pwc_disconnect() Woops: pointer mismatch udev/pdev.\n");
+		goto disconnect_out;
+	}
+#ifdef PWC_MAGIC
+	if (pdev->magic != PWC_MAGIC) {
+		Err("pwc_disconnect() Magic number failed. Consult your scrolls and try again.\n");
+		goto disconnect_out;
+	}
+#endif
+
+	/* We got unplugged; this is signalled by an EPIPE error code */
+	if (pdev->vopen) {
+		Info("Disconnected while webcam is in use!\n");
+		pdev->error_status = EPIPE;
+	}
+
+	/* Alert waiting processes */
+	wake_up_interruptible(&pdev->frameq);
+	/* Wait until device is closed */
+	while (pdev->vopen)
+		schedule();
+	/* Device is now closed, so we can safely unregister it */
+	Trace(TRACE_PROBE, "Unregistering video device in disconnect().\n");
+	video_unregister_device(pdev->vdev);
+
+	/* Free memory (don't set pdev to 0 just yet) */
+	kfree(pdev);
+
+disconnect_out:
+	/* search device_hint[] table if we occupy a slot, by any chance */
+	for (hint = 0; hint < MAX_DEV_HINTS; hint++)
+		if (device_hint[hint].pdev == pdev)
+			device_hint[hint].pdev = NULL;
+
+	unlock_kernel();
+}
+
+
+/* *grunt* We have to do atoi ourselves :-( */
+static int pwc_atoi(const char *s)
+{
+	int k = 0;
+
+	k = 0;
+	while (*s != '\0' && *s >= '0' && *s <= '9') {
+		k = 10 * k + (*s - '0');
+		s++;
+	}
+	return k;
+}
+
+
+/*
+ * Initialization code & module stuff
+ */
+
+static char size[10];
+static int fps = 0;
+static int fbufs = 0;
+static int mbufs = 0;
+static int trace = -1;
+static int compression = -1;
+static int leds[2] = { -1, -1 };
+static char *dev_hint[MAX_DEV_HINTS] = { };
+
+module_param_string(size, size, sizeof(size), 0);
+MODULE_PARM_DESC(size, "Initial image size. One of sqcif, qsif, qcif, sif, cif, vga");
+module_param(fps, int, 0000);
+MODULE_PARM_DESC(fps, "Initial frames per second. Varies with model, useful range 5-30");
+module_param(fbufs, int, 0000);
+MODULE_PARM_DESC(fbufs, "Number of internal frame buffers to reserve");
+module_param(mbufs, int, 0000);
+MODULE_PARM_DESC(mbufs, "Number of external (mmap()ed) image buffers");
+module_param(trace, int, 0000);
+MODULE_PARM_DESC(trace, "For debugging purposes");
+module_param(power_save, bool, 0000);
+MODULE_PARM_DESC(power_save, "Turn power save feature in camera on or off");
+module_param(compression, int, 0000);
+MODULE_PARM_DESC(compression, "Preferred compression quality. Range 0 (uncompressed) to 3 (high compression)");
+module_param_array(leds, int, NULL, 0000);
+MODULE_PARM_DESC(leds, "LED on,off time in milliseconds");
+module_param_array(dev_hint, charp, NULL, 0000);
+MODULE_PARM_DESC(dev_hint, "Device node hints");
+
+MODULE_DESCRIPTION("Philips & OEM USB webcam driver");
+MODULE_AUTHOR("Luc Saillard <luc@saillard.org>");
+MODULE_LICENSE("GPL");
+
+static int __init usb_pwc_init(void)
+{
+	int i, sz;
+	char *sizenames[PSZ_MAX] = { "sqcif", "qsif", "qcif", "sif", "cif", "vga" };
+
+	Info("Philips webcam module version " PWC_VERSION " loaded.\n");
+	Info("Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.\n");
+	Info("Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,\n");
+	Info("the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n");
+
+	if (fps) {
+		if (fps < 4 || fps > 30) {
+			Err("Framerate out of bounds (4-30).\n");
+			return -EINVAL;
+		}
+		default_fps = fps;
+		Info("Default framerate set to %d.\n", default_fps);
+	}
+
+	if (size[0]) {
+		/* string; try matching with array */
+		for (sz = 0; sz < PSZ_MAX; sz++) {
+			if (!strcmp(sizenames[sz], size)) { /* Found! */
+				default_size = sz;
+				break;
+			}
+		}
+		if (sz == PSZ_MAX) {
+			Err("Size not recognized; try size=[sqcif | qsif | qcif | sif | cif | vga].\n");
+			return -EINVAL;
+		}
+		Info("Default image size set to %s [%dx%d].\n", sizenames[default_size], pwc_image_sizes[default_size].x, pwc_image_sizes[default_size].y);
+	}
+	if (mbufs) {
+		if (mbufs < 1 || mbufs > MAX_IMAGES) {
+			Err("Illegal number of mmap() buffers; use a number between 1 and %d.\n", MAX_IMAGES);
+			return -EINVAL;
+		}
+		default_mbufs = mbufs;
+		Info("Number of image buffers set to %d.\n", default_mbufs);
+	}
+	if (fbufs) {
+		if (fbufs < 2 || fbufs > MAX_FRAMES) {
+			Err("Illegal number of frame buffers; use a number between 2 and %d.\n", MAX_FRAMES);
+			return -EINVAL;
+		}
+		default_fbufs = fbufs;
+		Info("Number of frame buffers set to %d.\n", default_fbufs);
+	}
+	if (trace >= 0) {
+		Info("Trace options: 0x%04x\n", trace);
+		pwc_trace = trace;
+	}
+	if (compression >= 0) {
+		if (compression > 3) {
+			Err("Invalid compression setting; use a number between 0 (uncompressed) and 3 (high).\n");
+			return -EINVAL;
+		}
+		pwc_preferred_compression = compression;
+		Info("Preferred compression set to %d.\n", pwc_preferred_compression);
+	}
+	if (power_save)
+		Info("Enabling power save on open/close.\n");
+	if (leds[0] >= 0)
+		led_on = leds[0];
+	if (leds[1] >= 0)
+		led_off = leds[1];
+
+	/* Big device node whoopla. Basically, it allows you to assign a
+	   device node (/dev/videoX) to a camera, based on its type
+	   & serial number. The format is [type[.serialnumber]:]node.
+
+	   Any camera that isn't matched by these rules gets the next
+	   available free device node.
+	 */
+	for (i = 0; i < MAX_DEV_HINTS; i++) {
+		char *s, *colon, *dot;
+
+		/* This loop also initializes the array */
+		device_hint[i].pdev = NULL;
+		s = dev_hint[i];
+		if (s != NULL && *s != '\0') {
+			device_hint[i].type = -1; /* wildcard */
+			strcpy(device_hint[i].serial_number, "*");
+
+			/* parse string: chop at ':' & '/' */
+			colon = dot = s;
+			while (*colon != '\0' && *colon != ':')
+				colon++;
+			while (*dot != '\0' && *dot != '.')
+				dot++;
+			/* Few sanity checks */
+			if (*dot != '\0' && dot > colon) {
+				Err("Malformed camera hint: the colon must be after the dot.\n");
+				return -EINVAL;
+			}
+
+			if (*colon == '\0') {
+				/* No colon */
+				if (*dot != '\0') {
+					Err("Malformed camera hint: no colon + device node given.\n");
+					return -EINVAL;
+				}
+				else {
+					/* No type or serial number specified, just a number. */
+					device_hint[i].device_node = pwc_atoi(s);
+				}
+			}
+			else {
+				/* There's a colon, so we have at least a type and a device node */
+				device_hint[i].type = pwc_atoi(s);
+				device_hint[i].device_node = pwc_atoi(colon + 1);
+				if (*dot != '\0') {
+					/* There's a serial number as well */
+					int k;
+
+					dot++;
+					k = 0;
+					while (*dot != ':' && k < 29) {
+						device_hint[i].serial_number[k++] = *dot;
+						dot++;
+					}
+					device_hint[i].serial_number[k] = '\0';
+				}
+			}
+#if PWC_DEBUG
+			Debug("device_hint[%d]:\n", i);
+			Debug("  type    : %d\n", device_hint[i].type);
+			Debug("  serial# : %s\n", device_hint[i].serial_number);
+			Debug("  node    : %d\n", device_hint[i].device_node);
+#endif
+		}
+		else
+			device_hint[i].type = 0; /* not filled */
+	} /* ..for MAX_DEV_HINTS */
+
+	Trace(TRACE_PROBE, "Registering driver at address 0x%p.\n", &pwc_driver);
+	return usb_register(&pwc_driver);
+}
+
+static void __exit usb_pwc_exit(void)
+{
+	Trace(TRACE_MODULE, "Deregistering driver.\n");
+	usb_deregister(&pwc_driver);
+	Info("Philips webcam module removed.\n");
+}
+
+module_init(usb_pwc_init);
+module_exit(usb_pwc_exit);
+
diff --git a/drivers/media/video/pwc/pwc-ioctl.h b/drivers/media/video/pwc/pwc-ioctl.h
new file mode 100644
index 000000000000..784bc72521fa
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-ioctl.h
@@ -0,0 +1,292 @@
+#ifndef PWC_IOCTL_H
+#define PWC_IOCTL_H
+
+/* (C) 2001-2004 Nemosoft Unv.
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+/* This is pwc-ioctl.h belonging to PWC 8.12.1
+   It contains structures and defines to communicate from user space
+   directly to the driver.
+ */
+
+/*
+   Changes
+   2001/08/03  Alvarado   Added ioctl constants to access methods for
+			  changing white balance and red/blue gains
+   2002/12/15  G. H. Fernandez-Toribio   VIDIOCGREALSIZE
+   2003/12/13  Nemosft Unv. Some modifications to make interfacing to
+	       PWCX easier
+ */
+
+/* These are private ioctl() commands, specific for the Philips webcams.
+   They contain functions not found in other webcams, and settings not
+   specified in the Video4Linux API.
+
+   The #define names are built up like follows:
+   VIDIOC		VIDeo IOCtl prefix
+	 PWC		Philps WebCam
+	    G           optional: Get
+	    S           optional: Set
+	     ... 	the function
+ */
+
+
+ /* Enumeration of image sizes */
+#define PSZ_SQCIF	0x00
+#define PSZ_QSIF	0x01
+#define PSZ_QCIF	0x02
+#define PSZ_SIF		0x03
+#define PSZ_CIF		0x04
+#define PSZ_VGA		0x05
+#define PSZ_MAX		6
+
+
+/* The frame rate is encoded in the video_window.flags parameter using
+   the upper 16 bits, since some flags are defined nowadays. The following
+   defines provide a mask and shift to filter out this value.
+
+   In 'Snapshot' mode the camera freezes its automatic exposure and colour
+   balance controls.
+ */
+#define PWC_FPS_SHIFT		16
+#define PWC_FPS_MASK		0x00FF0000
+#define PWC_FPS_FRMASK		0x003F0000
+#define PWC_FPS_SNAPSHOT	0x00400000
+
+
+/* structure for transferring x & y coordinates */
+struct pwc_coord
+{
+	int x, y;		/* guess what */
+	int size;		/* size, or offset */
+};
+
+
+/* Used with VIDIOCPWCPROBE */
+struct pwc_probe
+{
+	char name[32];
+	int type;
+};
+
+struct pwc_serial
+{
+	char serial[30];	/* String with serial number. Contains terminating 0 */
+};
+
+/* pwc_whitebalance.mode values */
+#define PWC_WB_INDOOR		0
+#define PWC_WB_OUTDOOR		1
+#define PWC_WB_FL		2
+#define PWC_WB_MANUAL		3
+#define PWC_WB_AUTO		4
+
+/* Used with VIDIOCPWC[SG]AWB (Auto White Balance).
+   Set mode to one of the PWC_WB_* values above.
+   *red and *blue are the respective gains of these colour components inside
+   the camera; range 0..65535
+   When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read;
+   otherwise undefined.
+   'read_red' and 'read_blue' are read-only.
+*/
+struct pwc_whitebalance
+{
+	int mode;
+	int manual_red, manual_blue;	/* R/W */
+	int read_red, read_blue;	/* R/O */
+};
+
+/*
+   'control_speed' and 'control_delay' are used in automatic whitebalance mode,
+   and tell the camera how fast it should react to changes in lighting, and
+   with how much delay. Valid values are 0..65535.
+*/
+struct pwc_wb_speed
+{
+	int control_speed;
+	int control_delay;
+
+};
+
+/* Used with VIDIOCPWC[SG]LED */
+struct pwc_leds
+{
+	int led_on;			/* Led on-time; range = 0..25000 */
+	int led_off;			/* Led off-time; range = 0..25000  */
+};
+
+/* Image size (used with GREALSIZE) */
+struct pwc_imagesize
+{
+	int width;
+	int height;
+};
+
+/* Defines and structures for Motorized Pan & Tilt */
+#define PWC_MPT_PAN		0x01
+#define PWC_MPT_TILT		0x02
+#define PWC_MPT_TIMEOUT		0x04 /* for status */
+
+/* Set angles; when absolute != 0, the angle is absolute and the
+   driver calculates the relative offset for you. This can only
+   be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns
+   absolute angles.
+ */
+struct pwc_mpt_angles
+{
+	int absolute;		/* write-only */
+	int pan;		/* degrees * 100 */
+	int tilt;		/* degress * 100 */
+};
+
+/* Range of angles of the camera, both horizontally and vertically.
+ */
+struct pwc_mpt_range
+{
+	int pan_min, pan_max;		/* degrees * 100 */
+	int tilt_min, tilt_max;
+};
+
+struct pwc_mpt_status
+{
+	int status;
+	int time_pan;
+	int time_tilt;
+};
+
+
+/* This is used for out-of-kernel decompression. With it, you can get
+   all the necessary information to initialize and use the decompressor
+   routines in standalone applications.
+ */
+struct pwc_video_command
+{
+	int type;		/* camera type (645, 675, 730, etc.) */
+	int release;		/* release number */
+
+	int size;		/* one of PSZ_* */
+	int alternate;
+	int command_len;	/* length of USB video command */
+	unsigned char command_buf[13];	/* Actual USB video command */
+	int bandlength;		/* >0 = compressed */
+	int frame_size;		/* Size of one (un)compressed frame */
+};
+
+/* Flags for PWCX subroutines. Not all modules honour all flags. */
+#define PWCX_FLAG_PLANAR	0x0001
+#define PWCX_FLAG_BAYER		0x0008
+
+
+/* IOCTL definitions */
+
+ /* Restore user settings */
+#define VIDIOCPWCRUSER		_IO('v', 192)
+ /* Save user settings */
+#define VIDIOCPWCSUSER		_IO('v', 193)
+ /* Restore factory settings */
+#define VIDIOCPWCFACTORY	_IO('v', 194)
+
+ /* You can manipulate the compression factor. A compression preference of 0
+    means use uncompressed modes when available; 1 is low compression, 2 is
+    medium and 3 is high compression preferred. Of course, the higher the
+    compression, the lower the bandwidth used but more chance of artefacts
+    in the image. The driver automatically chooses a higher compression when
+    the preferred mode is not available.
+  */
+ /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */
+#define VIDIOCPWCSCQUAL		_IOW('v', 195, int)
+ /* Get preferred compression quality */
+#define VIDIOCPWCGCQUAL		_IOR('v', 195, int)
+
+
+/* Retrieve serial number of camera */
+#define VIDIOCPWCGSERIAL	_IOR('v', 198, struct pwc_serial)
+
+ /* This is a probe function; since so many devices are supported, it
+    becomes difficult to include all the names in programs that want to
+    check for the enhanced Philips stuff. So in stead, try this PROBE;
+    it returns a structure with the original name, and the corresponding
+    Philips type.
+    To use, fill the structure with zeroes, call PROBE and if that succeeds,
+    compare the name with that returned from VIDIOCGCAP; they should be the
+    same. If so, you can be assured it is a Philips (OEM) cam and the type
+    is valid.
+ */
+#define VIDIOCPWCPROBE		_IOR('v', 199, struct pwc_probe)
+
+ /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */
+#define VIDIOCPWCSAGC		_IOW('v', 200, int)
+ /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */
+#define VIDIOCPWCGAGC		_IOR('v', 200, int)
+ /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */
+#define VIDIOCPWCSSHUTTER	_IOW('v', 201, int)
+
+ /* Color compensation (Auto White Balance) */
+#define VIDIOCPWCSAWB           _IOW('v', 202, struct pwc_whitebalance)
+#define VIDIOCPWCGAWB           _IOR('v', 202, struct pwc_whitebalance)
+
+ /* Auto WB speed */
+#define VIDIOCPWCSAWBSPEED	_IOW('v', 203, struct pwc_wb_speed)
+#define VIDIOCPWCGAWBSPEED	_IOR('v', 203, struct pwc_wb_speed)
+
+ /* LEDs on/off/blink; int range 0..65535 */
+#define VIDIOCPWCSLED           _IOW('v', 205, struct pwc_leds)
+#define VIDIOCPWCGLED           _IOR('v', 205, struct pwc_leds)
+
+  /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */
+#define VIDIOCPWCSCONTOUR	_IOW('v', 206, int)
+#define VIDIOCPWCGCONTOUR	_IOR('v', 206, int)
+
+  /* Backlight compensation; 0 = off, otherwise on */
+#define VIDIOCPWCSBACKLIGHT	_IOW('v', 207, int)
+#define VIDIOCPWCGBACKLIGHT	_IOR('v', 207, int)
+
+  /* Flickerless mode; = 0 off, otherwise on */
+#define VIDIOCPWCSFLICKER	_IOW('v', 208, int)
+#define VIDIOCPWCGFLICKER	_IOR('v', 208, int)
+
+  /* Dynamic noise reduction; 0 off, 3 = high noise reduction */
+#define VIDIOCPWCSDYNNOISE	_IOW('v', 209, int)
+#define VIDIOCPWCGDYNNOISE	_IOR('v', 209, int)
+
+ /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */
+#define VIDIOCPWCGREALSIZE	_IOR('v', 210, struct pwc_imagesize)
+
+ /* Motorized pan & tilt functions */
+#define VIDIOCPWCMPTRESET	_IOW('v', 211, int)
+#define VIDIOCPWCMPTGRANGE	_IOR('v', 211, struct pwc_mpt_range)
+#define VIDIOCPWCMPTSANGLE	_IOW('v', 212, struct pwc_mpt_angles)
+#define VIDIOCPWCMPTGANGLE	_IOR('v', 212, struct pwc_mpt_angles)
+#define VIDIOCPWCMPTSTATUS	_IOR('v', 213, struct pwc_mpt_status)
+
+ /* Get the USB set-video command; needed for initializing libpwcx */
+#define VIDIOCPWCGVIDCMD	_IOR('v', 215, struct pwc_video_command)
+struct pwc_table_init_buffer {
+   int len;
+   char *buffer;
+
+};
+#define VIDIOCPWCGVIDTABLE	_IOR('v', 216, struct pwc_table_init_buffer)
+
+#endif
diff --git a/drivers/media/video/pwc/pwc-kiara.c b/drivers/media/video/pwc/pwc-kiara.c
new file mode 100644
index 000000000000..4c96037f7be5
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-kiara.c
@@ -0,0 +1,318 @@
+/* Linux driver for Philips webcam
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+
+/* This tables contains entries for the 730/740/750 (Kiara) camera, with
+   4 different qualities (no compression, low, medium, high).
+   It lists the bandwidth requirements for said mode by its alternate interface
+   number. An alternate of 0 means that the mode is unavailable.
+
+   There are 6 * 4 * 4 entries:
+     6 different resolutions subqcif, qsif, qcif, sif, cif, vga
+     6 framerates: 5, 10, 15, 20, 25, 30
+     4 compression modi: none, low, medium, high
+
+   When an uncompressed mode is not available, the next available compressed mode
+   will be chosen (unless the decompressor is absent). Sometimes there are only
+   1 or 2 compressed modes available; in that case entries are duplicated.
+*/
+
+
+#include "pwc-kiara.h"
+#include "pwc-uncompress.h"
+
+const struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4] =
+{
+   /* SQCIF */
+   {
+      /* 5 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 10 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 15 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 20 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 25 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 30 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+   },
+   /* QSIF */
+   {
+      /* 5 fps */
+      {
+	 {1, 146,    0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
+	 {1, 146,    0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
+	 {1, 146,    0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
+	 {1, 146,    0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
+      },
+      /* 10 fps */
+      {
+	 {2, 291,    0, {0x1C, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0x01, 0x80}},
+	 {1, 192,  630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
+	 {1, 192,  630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
+	 {1, 192,  630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
+      },
+      /* 15 fps */
+      {
+	 {3, 437,    0, {0x1B, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x01, 0x80}},
+	 {2, 292,  640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}},
+	 {2, 292,  640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}},
+	 {1, 192,  420, {0x13, 0xF4, 0x30, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x18, 0xC0, 0x00, 0x80}},
+      },
+      /* 20 fps */
+      {
+	 {4, 589,    0, {0x1A, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4D, 0x02, 0x80}},
+	 {3, 448,  730, {0x12, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xC0, 0x01, 0x80}},
+	 {2, 292,  476, {0x12, 0xF4, 0x30, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0x01, 0x80}},
+	 {1, 192,  312, {0x12, 0xF4, 0x50, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0x00, 0x80}},
+      },
+      /* 25 fps */
+      {
+	 {5, 703,    0, {0x19, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x02, 0x80}},
+	 {3, 447,  610, {0x11, 0xF4, 0x30, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x28, 0xBF, 0x01, 0x80}},
+	 {2, 292,  398, {0x11, 0xF4, 0x50, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x28, 0x24, 0x01, 0x80}},
+	 {1, 193,  262, {0x11, 0xF4, 0x50, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x28, 0xC1, 0x00, 0x80}},
+      },
+      /* 30 fps */
+      {
+	 {8, 874,    0, {0x18, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x6A, 0x03, 0x80}},
+	 {5, 704,  730, {0x10, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x28, 0xC0, 0x02, 0x80}},
+	 {3, 448,  492, {0x10, 0xF4, 0x30, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x28, 0xC0, 0x01, 0x80}},
+	 {2, 292,  320, {0x10, 0xF4, 0x50, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x28, 0x24, 0x01, 0x80}},
+      },
+   },
+   /* QCIF */
+   {
+      /* 5 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 10 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 15 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 20 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 25 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 30 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+   },
+   /* SIF */
+   {
+      /* 5 fps */
+      {
+	 {4, 582,    0, {0x0D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x02, 0x80}},
+	 {3, 387, 1276, {0x05, 0xF4, 0x30, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x01, 0x80}},
+	 {2, 291,  960, {0x05, 0xF4, 0x30, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0x01, 0x80}},
+	 {1, 191,  630, {0x05, 0xF4, 0x50, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x18, 0xBF, 0x00, 0x80}},
+      },
+      /* 10 fps */
+      {
+	 {0, },
+	 {6, 775, 1278, {0x04, 0xF4, 0x30, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x03, 0x80}},
+	 {3, 447,  736, {0x04, 0xF4, 0x30, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x28, 0xBF, 0x01, 0x80}},
+	 {2, 292,  480, {0x04, 0xF4, 0x70, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x28, 0x24, 0x01, 0x80}},
+      },
+      /* 15 fps */
+      {
+	 {0, },
+	 {9, 955, 1050, {0x03, 0xF4, 0x30, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x03, 0x80}},
+	 {4, 592,  650, {0x03, 0xF4, 0x30, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x50, 0x02, 0x80}},
+	 {3, 448,  492, {0x03, 0xF4, 0x50, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x38, 0xC0, 0x01, 0x80}},
+      },
+      /* 20 fps */
+      {
+	 {0, },
+	 {9, 958,  782, {0x02, 0xF4, 0x30, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x03, 0x80}},
+	 {5, 703,  574, {0x02, 0xF4, 0x50, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x02, 0x80}},
+	 {3, 446,  364, {0x02, 0xF4, 0x90, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x38, 0xBE, 0x01, 0x80}},
+      },
+      /* 25 fps */
+      {
+	 {0, },
+	 {9, 958,  654, {0x01, 0xF4, 0x30, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x03, 0x80}},
+	 {6, 776,  530, {0x01, 0xF4, 0x50, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x03, 0x80}},
+	 {4, 592,  404, {0x01, 0xF4, 0x70, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x48, 0x50, 0x02, 0x80}},
+      },
+      /* 30 fps */
+      {
+	 {0, },
+	 {9, 957,  526, {0x00, 0xF4, 0x50, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x03, 0x80}},
+	 {6, 775,  426, {0x00, 0xF4, 0x70, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x03, 0x80}},
+	 {4, 590,  324, {0x00, 0x7A, 0x88, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x50, 0x4E, 0x02, 0x80}},
+      },
+   },
+   /* CIF */
+   {
+      /* 5 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 10 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 15 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 20 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 25 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 30 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+   },
+   /* VGA */
+   {
+      /* 5 fps */
+      {
+	 {0, },
+	 {6, 773, 1272, {0x25, 0xF4, 0x30, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}},
+	 {4, 592,  976, {0x25, 0xF4, 0x50, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x02, 0x80}},
+	 {3, 448,  738, {0x25, 0xF4, 0x90, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x01, 0x80}},
+      },
+      /* 10 fps */
+      {
+	 {0, },
+	 {9, 956,  788, {0x24, 0xF4, 0x70, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x03, 0x80}},
+	 {6, 776,  640, {0x24, 0xF4, 0xB0, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x03, 0x80}},
+	 {4, 592,  488, {0x24, 0x7A, 0xE8, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x02, 0x80}},
+      },
+      /* 15 fps */
+      {
+	 {0, },
+	 {9, 957,  526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}},
+	 {9, 957,  526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}},
+	 {8, 895,  492, {0x23, 0x7A, 0xE8, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x03, 0x80}},
+      },
+      /* 20 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 25 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 30 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+   },
+};
+
diff --git a/drivers/media/video/pwc/pwc-kiara.h b/drivers/media/video/pwc/pwc-kiara.h
new file mode 100644
index 000000000000..12929abbb1f0
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-kiara.h
@@ -0,0 +1,45 @@
+/* Linux driver for Philips webcam
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+/* Entries for the Kiara (730/740/750) camera */
+
+#ifndef PWC_KIARA_H
+#define PWC_KIARA_H
+
+#include "pwc-ioctl.h"
+
+struct Kiara_table_entry
+{
+	char alternate;			/* USB alternate interface */
+	unsigned short packetsize;	/* Normal packet size */
+	unsigned short bandlength;	/* Bandlength when decompressing */
+	unsigned char mode[12];		/* precomputed mode settings for cam */
+};
+
+const extern struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4];
+const extern unsigned int KiaraRomTable[8][2][16][8];
+
+#endif
+
+
diff --git a/drivers/media/video/pwc/pwc-misc.c b/drivers/media/video/pwc/pwc-misc.c
new file mode 100644
index 000000000000..58fe79747992
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-misc.c
@@ -0,0 +1,140 @@
+/* Linux driver for Philips webcam
+   Various miscellaneous functions and tables.
+   (C) 1999-2003 Nemosoft Unv.
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/slab.h>
+
+#include "pwc.h"
+
+struct pwc_coord pwc_image_sizes[PSZ_MAX] =
+{
+	{ 128,  96, 0 },
+	{ 160, 120, 0 },
+	{ 176, 144, 0 },
+	{ 320, 240, 0 },
+	{ 352, 288, 0 },
+	{ 640, 480, 0 },
+};
+
+/* x,y -> PSZ_ */
+int pwc_decode_size(struct pwc_device *pdev, int width, int height)
+{
+	int i, find;
+
+	/* Make sure we don't go beyond our max size.
+	   NB: we have different limits for RAW and normal modes. In case
+	   you don't have the decompressor loaded or use RAW mode,
+	   the maximum viewable size is smaller.
+	*/
+	if (pdev->vpalette == VIDEO_PALETTE_RAW)
+	{
+		if (width > pdev->abs_max.x || height > pdev->abs_max.y)
+		{
+			Debug("VIDEO_PALETTE_RAW: going beyond abs_max.\n");
+			return -1;
+		}
+	}
+	else
+	{
+		if (width > pdev->view_max.x || height > pdev->view_max.y)
+		{
+			Debug("VIDEO_PALETTE_ not RAW: going beyond view_max.\n");
+			return -1;
+		}
+	}
+
+	/* Find the largest size supported by the camera that fits into the
+	   requested size.
+	 */
+	find = -1;
+	for (i = 0; i < PSZ_MAX; i++) {
+		if (pdev->image_mask & (1 << i)) {
+			if (pwc_image_sizes[i].x <= width && pwc_image_sizes[i].y <= height)
+				find = i;
+		}
+	}
+	return find;
+}
+
+/* initialize variables depending on type and decompressor*/
+void pwc_construct(struct pwc_device *pdev)
+{
+	switch(pdev->type) {
+	case 645:
+	case 646:
+		pdev->view_min.x = 128;
+		pdev->view_min.y =  96;
+		pdev->view_max.x = 352;
+		pdev->view_max.y = 288;
+		pdev->abs_max.x  = 352;
+		pdev->abs_max.y  = 288;
+		pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QCIF | 1 << PSZ_CIF;
+		pdev->vcinterface = 2;
+		pdev->vendpoint = 4;
+		pdev->frame_header_size = 0;
+		pdev->frame_trailer_size = 0;
+		break;
+	case 675:
+	case 680:
+	case 690:
+		pdev->view_min.x = 128;
+		pdev->view_min.y =  96;
+		/* Anthill bug #38: PWC always reports max size, even without PWCX */
+		pdev->view_max.x = 640;
+		pdev->view_max.y = 480;
+		pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QSIF | 1 << PSZ_QCIF | 1 << PSZ_SIF | 1 << PSZ_CIF | 1 << PSZ_VGA;
+		pdev->abs_max.x = 640;
+		pdev->abs_max.y = 480;
+		pdev->vcinterface = 3;
+		pdev->vendpoint = 4;
+		pdev->frame_header_size = 0;
+		pdev->frame_trailer_size = 0;
+		break;
+	case 720:
+	case 730:
+	case 740:
+	case 750:
+		pdev->view_min.x = 160;
+		pdev->view_min.y = 120;
+		pdev->view_max.x = 640;
+		pdev->view_max.y = 480;
+		pdev->image_mask = 1 << PSZ_QSIF | 1 << PSZ_SIF | 1 << PSZ_VGA;
+		pdev->abs_max.x = 640;
+		pdev->abs_max.y = 480;
+		pdev->vcinterface = 3;
+		pdev->vendpoint = 5;
+		pdev->frame_header_size = TOUCAM_HEADER_SIZE;
+		pdev->frame_trailer_size = TOUCAM_TRAILER_SIZE;
+		break;
+	}
+	Debug("type = %d\n",pdev->type);
+	pdev->vpalette = VIDEO_PALETTE_YUV420P; /* default */
+	pdev->view_min.size = pdev->view_min.x * pdev->view_min.y;
+	pdev->view_max.size = pdev->view_max.x * pdev->view_max.y;
+	/* length of image, in YUV format; always allocate enough memory. */
+	pdev->len_per_image = (pdev->abs_max.x * pdev->abs_max.y * 3) / 2;
+}
+
+
diff --git a/drivers/media/video/pwc/pwc-nala.h b/drivers/media/video/pwc/pwc-nala.h
new file mode 100644
index 000000000000..168c73ef75d8
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-nala.h
@@ -0,0 +1,66 @@
+   /* SQCIF */
+   {
+      {0, 0, {0x04, 0x01, 0x03}},
+      {8, 0, {0x05, 0x01, 0x03}},
+      {7, 0, {0x08, 0x01, 0x03}},
+      {7, 0, {0x0A, 0x01, 0x03}},
+      {6, 0, {0x0C, 0x01, 0x03}},
+      {5, 0, {0x0F, 0x01, 0x03}},
+      {4, 0, {0x14, 0x01, 0x03}},
+      {3, 0, {0x18, 0x01, 0x03}},
+   },
+   /* QSIF */
+   {
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+   },
+   /* QCIF */
+   {
+      {0, 0, {0x04, 0x01, 0x02}},
+      {8, 0, {0x05, 0x01, 0x02}},
+      {7, 0, {0x08, 0x01, 0x02}},
+      {6, 0, {0x0A, 0x01, 0x02}},
+      {5, 0, {0x0C, 0x01, 0x02}},
+      {4, 0, {0x0F, 0x01, 0x02}},
+      {1, 0, {0x14, 0x01, 0x02}},
+      {1, 0, {0x18, 0x01, 0x02}},
+   },
+   /* SIF */
+   {
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+   },
+   /* CIF */
+   {
+      {4, 0, {0x04, 0x01, 0x01}},
+      {7, 1, {0x05, 0x03, 0x01}},
+      {6, 1, {0x08, 0x03, 0x01}},
+      {4, 1, {0x0A, 0x03, 0x01}},
+      {3, 1, {0x0C, 0x03, 0x01}},
+      {2, 1, {0x0F, 0x03, 0x01}},
+      {0},
+      {0},
+   },
+   /* VGA */
+   {
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+      {0},
+   },
diff --git a/drivers/media/video/pwc/pwc-timon.c b/drivers/media/video/pwc/pwc-timon.c
new file mode 100644
index 000000000000..175250d089cf
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-timon.c
@@ -0,0 +1,316 @@
+/* Linux driver for Philips webcam
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+
+/* This tables contains entries for the 675/680/690 (Timon) camera, with
+   4 different qualities (no compression, low, medium, high).
+   It lists the bandwidth requirements for said mode by its alternate interface
+   number. An alternate of 0 means that the mode is unavailable.
+
+   There are 6 * 4 * 4 entries:
+     6 different resolutions subqcif, qsif, qcif, sif, cif, vga
+     6 framerates: 5, 10, 15, 20, 25, 30
+     4 compression modi: none, low, medium, high
+
+   When an uncompressed mode is not available, the next available compressed mode
+   will be chosen (unless the decompressor is absent). Sometimes there are only
+   1 or 2 compressed modes available; in that case entries are duplicated.
+*/
+
+#include "pwc-timon.h"
+
+const struct Timon_table_entry Timon_table[PSZ_MAX][6][4] =
+{
+   /* SQCIF */
+   {
+      /* 5 fps */
+      {
+	 {1, 140,    0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
+	 {1, 140,    0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
+	 {1, 140,    0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
+	 {1, 140,    0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
+      },
+      /* 10 fps */
+      {
+	 {2, 280,    0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
+	 {2, 280,    0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
+	 {2, 280,    0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
+	 {2, 280,    0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
+      },
+      /* 15 fps */
+      {
+	 {3, 410,    0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
+	 {3, 410,    0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
+	 {3, 410,    0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
+	 {3, 410,    0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
+      },
+      /* 20 fps */
+      {
+	 {4, 559,    0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
+	 {4, 559,    0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
+	 {4, 559,    0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
+	 {4, 559,    0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
+      },
+      /* 25 fps */
+      {
+	 {5, 659,    0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
+	 {5, 659,    0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
+	 {5, 659,    0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
+	 {5, 659,    0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
+      },
+      /* 30 fps */
+      {
+	 {7, 838,    0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
+	 {7, 838,    0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
+	 {7, 838,    0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
+	 {7, 838,    0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
+      },
+   },
+   /* QSIF */
+   {
+      /* 5 fps */
+      {
+	 {1, 146,    0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
+	 {1, 146,    0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
+	 {1, 146,    0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
+	 {1, 146,    0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
+      },
+      /* 10 fps */
+      {
+	 {2, 291,    0, {0x2C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0xA1, 0xC0, 0x02}},
+	 {1, 191,  630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
+	 {1, 191,  630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
+	 {1, 191,  630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
+      },
+      /* 15 fps */
+      {
+	 {3, 437,    0, {0x2B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x6D, 0xC0, 0x02}},
+	 {2, 291,  640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
+	 {2, 291,  640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
+	 {1, 191,  420, {0x2B, 0xF4, 0x0D, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
+      },
+      /* 20 fps */
+      {
+	 {4, 588,    0, {0x2A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4C, 0x52, 0xC0, 0x02}},
+	 {3, 447,  730, {0x2A, 0xF4, 0x05, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
+	 {2, 292,  476, {0x2A, 0xF4, 0x0D, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
+	 {1, 192,  312, {0x2A, 0xF4, 0x1D, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}},
+      },
+      /* 25 fps */
+      {
+	 {5, 703,    0, {0x29, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x42, 0xC0, 0x02}},
+	 {3, 447,  610, {0x29, 0xF4, 0x05, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
+	 {2, 292,  398, {0x29, 0xF4, 0x0D, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
+	 {1, 192,  262, {0x29, 0xF4, 0x25, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}},
+      },
+      /* 30 fps */
+      {
+	 {8, 873,    0, {0x28, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x69, 0x37, 0xC0, 0x02}},
+	 {5, 704,  774, {0x28, 0xF4, 0x05, 0x18, 0x21, 0x17, 0x59, 0x0F, 0x18, 0xC0, 0x42, 0xC0, 0x02}},
+	 {3, 448,  492, {0x28, 0xF4, 0x05, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x18, 0xC0, 0x69, 0xC0, 0x02}},
+	 {2, 291,  320, {0x28, 0xF4, 0x1D, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}},
+      },
+   },
+   /* QCIF */
+   {
+      /* 5 fps */
+      {
+	 {1, 193,    0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
+	 {1, 193,    0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
+	 {1, 193,    0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
+	 {1, 193,    0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
+      },
+      /* 10 fps */
+      {
+	 {3, 385,    0, {0x0C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x81, 0x79, 0xC0, 0x02}},
+	 {2, 291,  800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
+	 {2, 291,  800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
+	 {1, 194,  532, {0x0C, 0xF4, 0x05, 0x10, 0x9A, 0x0F, 0xBE, 0x1B, 0x08, 0xC2, 0xF0, 0xC0, 0x02}},
+      },
+      /* 15 fps */
+      {
+	 {4, 577,    0, {0x0B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x41, 0x52, 0xC0, 0x02}},
+	 {3, 447,  818, {0x0B, 0xF4, 0x05, 0x19, 0x89, 0x18, 0xAD, 0x0F, 0x10, 0xBF, 0x69, 0xC0, 0x02}},
+	 {2, 292,  534, {0x0B, 0xF4, 0x05, 0x10, 0xA3, 0x0F, 0xC7, 0x19, 0x10, 0x24, 0xA1, 0xC0, 0x02}},
+	 {1, 195,  356, {0x0B, 0xF4, 0x15, 0x0B, 0x11, 0x0A, 0x35, 0x1E, 0x10, 0xC3, 0xF0, 0xC0, 0x02}},
+      },
+      /* 20 fps */
+      {
+	 {6, 776,    0, {0x0A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x08, 0x3F, 0xC0, 0x02}},
+	 {4, 591,  804, {0x0A, 0xF4, 0x05, 0x19, 0x1E, 0x18, 0x42, 0x0F, 0x18, 0x4F, 0x4E, 0xC0, 0x02}},
+	 {3, 447,  608, {0x0A, 0xF4, 0x05, 0x12, 0xFD, 0x12, 0x21, 0x15, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
+	 {2, 291,  396, {0x0A, 0xF4, 0x15, 0x0C, 0x5E, 0x0B, 0x82, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}},
+      },
+      /* 25 fps */
+      {
+	 {9, 928,    0, {0x09, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xA0, 0x33, 0xC0, 0x02}},
+	 {5, 703,  800, {0x09, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x10, 0x18, 0xBF, 0x42, 0xC0, 0x02}},
+	 {3, 447,  508, {0x09, 0xF4, 0x0D, 0x0F, 0xD2, 0x0E, 0xF6, 0x1B, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
+	 {2, 292,  332, {0x09, 0xF4, 0x1D, 0x0A, 0x5A, 0x09, 0x7E, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
+      },
+      /* 30 fps */
+      {
+	 {0, },
+	 {9, 956,  876, {0x08, 0xF4, 0x05, 0x1B, 0x58, 0x1A, 0x7C, 0x0E, 0x20, 0xBC, 0x33, 0x10, 0x02}},
+	 {4, 592,  542, {0x08, 0xF4, 0x05, 0x10, 0xE4, 0x10, 0x08, 0x17, 0x20, 0x50, 0x4E, 0x10, 0x02}},
+	 {2, 291,  266, {0x08, 0xF4, 0x25, 0x08, 0x48, 0x07, 0x6C, 0x1E, 0x20, 0x23, 0xA1, 0x10, 0x02}},
+      },
+   },
+   /* SIF */
+   {
+      /* 5 fps */
+      {
+	 {4, 582,    0, {0x35, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x52, 0x60, 0x02}},
+	 {3, 387, 1276, {0x35, 0xF4, 0x05, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x79, 0x60, 0x02}},
+	 {2, 291,  960, {0x35, 0xF4, 0x0D, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0xA1, 0x60, 0x02}},
+	 {1, 191,  630, {0x35, 0xF4, 0x1D, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x08, 0xBF, 0xF4, 0x60, 0x02}},
+      },
+      /* 10 fps */
+      {
+	 {0, },
+	 {6, 775, 1278, {0x34, 0xF4, 0x05, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x3F, 0x10, 0x02}},
+	 {3, 447,  736, {0x34, 0xF4, 0x15, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x18, 0xBF, 0x69, 0x10, 0x02}},
+	 {2, 291,  480, {0x34, 0xF4, 0x2D, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x18, 0x23, 0xA1, 0x10, 0x02}},
+      },
+      /* 15 fps */
+      {
+	 {0, },
+	 {9, 955, 1050, {0x33, 0xF4, 0x05, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x33, 0x10, 0x02}},
+	 {4, 591,  650, {0x33, 0xF4, 0x15, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x4F, 0x4E, 0x10, 0x02}},
+	 {3, 448,  492, {0x33, 0xF4, 0x25, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x28, 0xC0, 0x69, 0x10, 0x02}},
+      },
+      /* 20 fps */
+      {
+	 {0, },
+	 {9, 958,  782, {0x32, 0xF4, 0x0D, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x33, 0xD0, 0x02}},
+	 {5, 703,  574, {0x32, 0xF4, 0x1D, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x42, 0xD0, 0x02}},
+	 {3, 446,  364, {0x32, 0xF4, 0x3D, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x30, 0xBE, 0x69, 0xD0, 0x02}},
+      },
+      /* 25 fps */
+      {
+	 {0, },
+	 {9, 958,  654, {0x31, 0xF4, 0x15, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x33, 0x90, 0x02}},
+	 {6, 776,  530, {0x31, 0xF4, 0x25, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x3F, 0x90, 0x02}},
+	 {4, 592,  404, {0x31, 0xF4, 0x35, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x38, 0x50, 0x4E, 0x90, 0x02}},
+      },
+      /* 30 fps */
+      {
+	 {0, },
+	 {9, 957,  526, {0x30, 0xF4, 0x25, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x33, 0x60, 0x02}},
+	 {6, 775,  426, {0x30, 0xF4, 0x35, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x3F, 0x60, 0x02}},
+	 {4, 590,  324, {0x30, 0x7A, 0x4B, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x40, 0x4E, 0x52, 0x60, 0x02}},
+      },
+   },
+   /* CIF */
+   {
+      /* 5 fps */
+      {
+	 {6, 771,    0, {0x15, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x03, 0x3F, 0x80, 0x02}},
+	 {4, 465, 1278, {0x15, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x03, 0x18, 0xD1, 0x65, 0x80, 0x02}},
+	 {2, 291,  800, {0x15, 0xF4, 0x15, 0x18, 0xF4, 0x17, 0x3C, 0x05, 0x18, 0x23, 0xA1, 0x80, 0x02}},
+	 {1, 193,  528, {0x15, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x18, 0xC1, 0xF4, 0x80, 0x02}},
+      },
+      /* 10 fps */
+      {
+	 {0, },
+	 {9, 932, 1278, {0x14, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x04, 0x30, 0xA4, 0x33, 0x10, 0x02}},
+	 {4, 591,  812, {0x14, 0xF4, 0x15, 0x19, 0x56, 0x17, 0x9E, 0x06, 0x28, 0x4F, 0x4E, 0x10, 0x02}},
+	 {2, 291,  400, {0x14, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x28, 0x23, 0xA1, 0x10, 0x02}},
+      },
+      /* 15 fps */
+      {
+	 {0, },
+	 {9, 956,  876, {0x13, 0xF4, 0x0D, 0x1B, 0x58, 0x19, 0xA0, 0x05, 0x38, 0xBC, 0x33, 0x60, 0x02}},
+	 {5, 703,  644, {0x13, 0xF4, 0x1D, 0x14, 0x1C, 0x12, 0x64, 0x08, 0x38, 0xBF, 0x42, 0x60, 0x02}},
+	 {3, 448,  410, {0x13, 0xF4, 0x3D, 0x0C, 0xC4, 0x0B, 0x0C, 0x0E, 0x38, 0xC0, 0x69, 0x60, 0x02}},
+      },
+      /* 20 fps */
+      {
+	 {0, },
+	 {9, 956,  650, {0x12, 0xF4, 0x1D, 0x14, 0x4A, 0x12, 0x92, 0x09, 0x48, 0xBC, 0x33, 0x10, 0x03}},
+	 {6, 776,  528, {0x12, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x40, 0x08, 0x3F, 0x10, 0x03}},
+	 {4, 591,  402, {0x12, 0xF4, 0x3D, 0x0C, 0x8F, 0x0A, 0xD7, 0x0E, 0x40, 0x4F, 0x4E, 0x10, 0x03}},
+      },
+      /* 25 fps */
+      {
+	 {0, },
+	 {9, 956,  544, {0x11, 0xF4, 0x25, 0x10, 0xF4, 0x0F, 0x3C, 0x0A, 0x48, 0xBC, 0x33, 0xC0, 0x02}},
+	 {7, 840,  478, {0x11, 0xF4, 0x2D, 0x0E, 0xEB, 0x0D, 0x33, 0x0B, 0x48, 0x48, 0x3B, 0xC0, 0x02}},
+	 {5, 703,  400, {0x11, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x48, 0xBF, 0x42, 0xC0, 0x02}},
+      },
+      /* 30 fps */
+      {
+	 {0, },
+	 {9, 956,  438, {0x10, 0xF4, 0x35, 0x0D, 0xAC, 0x0B, 0xF4, 0x0D, 0x50, 0xBC, 0x33, 0x10, 0x02}},
+	 {7, 838,  384, {0x10, 0xF4, 0x45, 0x0B, 0xFD, 0x0A, 0x45, 0x0F, 0x50, 0x46, 0x3B, 0x10, 0x02}},
+	 {6, 773,  354, {0x10, 0x7A, 0x4B, 0x0B, 0x0C, 0x09, 0x80, 0x10, 0x50, 0x05, 0x3F, 0x10, 0x02}},
+      },
+   },
+   /* VGA */
+   {
+      /* 5 fps */
+      {
+	 {0, },
+	 {6, 773, 1272, {0x1D, 0xF4, 0x15, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x3F, 0x10, 0x02}},
+	 {4, 592,  976, {0x1D, 0xF4, 0x25, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x4E, 0x10, 0x02}},
+	 {3, 448,  738, {0x1D, 0xF4, 0x3D, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x69, 0x10, 0x02}},
+      },
+      /* 10 fps */
+      {
+	 {0, },
+	 {9, 956,  788, {0x1C, 0xF4, 0x35, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x33, 0x10, 0x02}},
+	 {6, 776,  640, {0x1C, 0x7A, 0x53, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x3F, 0x10, 0x02}},
+	 {4, 592,  488, {0x1C, 0x7A, 0x6B, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x4E, 0x10, 0x02}},
+      },
+      /* 15 fps */
+      {
+	 {0, },
+	 {9, 957,  526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}},
+	 {9, 957,  526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}},
+	 {8, 895,  492, {0x1B, 0x7A, 0x6B, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x37, 0x80, 0x02}},
+      },
+      /* 20 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 25 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+      /* 30 fps */
+      {
+	 {0, },
+	 {0, },
+	 {0, },
+	 {0, },
+      },
+   },
+};
+
diff --git a/drivers/media/video/pwc/pwc-timon.h b/drivers/media/video/pwc/pwc-timon.h
new file mode 100644
index 000000000000..a86b3782a081
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-timon.h
@@ -0,0 +1,61 @@
+/* Linux driver for Philips webcam
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+
+
+/* This tables contains entries for the 675/680/690 (Timon) camera, with
+   4 different qualities (no compression, low, medium, high).
+   It lists the bandwidth requirements for said mode by its alternate interface
+   number. An alternate of 0 means that the mode is unavailable.
+
+   There are 6 * 4 * 4 entries:
+     6 different resolutions subqcif, qsif, qcif, sif, cif, vga
+     6 framerates: 5, 10, 15, 20, 25, 30
+     4 compression modi: none, low, medium, high
+
+   When an uncompressed mode is not available, the next available compressed mode
+   will be chosen (unless the decompressor is absent). Sometimes there are only
+   1 or 2 compressed modes available; in that case entries are duplicated.
+*/
+
+#ifndef PWC_TIMON_H
+#define PWC_TIMON_H
+
+#include "pwc-ioctl.h"
+
+struct Timon_table_entry
+{
+	char alternate;			/* USB alternate interface */
+	unsigned short packetsize;	/* Normal packet size */
+	unsigned short bandlength;	/* Bandlength when decompressing */
+	unsigned char mode[13];		/* precomputed mode settings for cam */
+};
+
+const extern struct Timon_table_entry Timon_table[PSZ_MAX][6][4];
+const extern unsigned int TimonRomTable [16][2][16][8];
+
+
+#endif
+
+
diff --git a/drivers/media/video/pwc/pwc-uncompress.c b/drivers/media/video/pwc/pwc-uncompress.c
new file mode 100644
index 000000000000..b37a89a163f9
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-uncompress.c
@@ -0,0 +1,146 @@
+/* Linux driver for Philips webcam
+   Decompression frontend.
+   (C) 1999-2003 Nemosoft Unv.
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <asm/current.h>
+#include <asm/types.h>
+
+#include "pwc.h"
+#include "pwc-uncompress.h"
+
+int pwc_decompress(struct pwc_device *pdev)
+{
+	struct pwc_frame_buf *fbuf;
+	int n, line, col, stride;
+	void *yuv, *image;
+	u16 *src;
+	u16 *dsty, *dstu, *dstv;
+
+	if (pdev == NULL)
+		return -EFAULT;
+#if defined(__KERNEL__) && defined(PWC_MAGIC)
+	if (pdev->magic != PWC_MAGIC) {
+		Err("pwc_decompress(): magic failed.\n");
+		return -EFAULT;
+	}
+#endif
+
+	fbuf = pdev->read_frame;
+	if (fbuf == NULL)
+		return -EFAULT;
+	image = pdev->image_ptr[pdev->fill_image];
+	if (!image)
+		return -EFAULT;
+
+	yuv = fbuf->data + pdev->frame_header_size;  /* Skip header */
+
+	/* Raw format; that's easy... */
+	if (pdev->vpalette == VIDEO_PALETTE_RAW)
+	{
+		memcpy(image, yuv, pdev->frame_size);
+		return 0;
+	}
+
+	if (pdev->vbandlength == 0) {
+		/* Uncompressed mode. We copy the data into the output buffer,
+		   using the viewport size (which may be larger than the image
+		   size). Unfortunately we have to do a bit of byte stuffing
+		   to get the desired output format/size.
+		 */
+			/*
+			 * We do some byte shuffling here to go from the
+			 * native format to YUV420P.
+			 */
+			src = (u16 *)yuv;
+			n = pdev->view.x * pdev->view.y;
+
+			/* offset in Y plane */
+			stride = pdev->view.x * pdev->offset.y + pdev->offset.x;
+			dsty = (u16 *)(image + stride);
+
+			/* offsets in U/V planes */
+			stride = pdev->view.x * pdev->offset.y / 4 + pdev->offset.x / 2;
+			dstu = (u16 *)(image + n +         stride);
+			dstv = (u16 *)(image + n + n / 4 + stride);
+
+			/* increment after each line */
+			stride = (pdev->view.x - pdev->image.x) / 2; /* u16 is 2 bytes */
+
+			for (line = 0; line < pdev->image.y; line++) {
+				for (col = 0; col < pdev->image.x; col += 4) {
+					*dsty++ = *src++;
+					*dsty++ = *src++;
+					if (line & 1)
+						*dstv++ = *src++;
+					else
+						*dstu++ = *src++;
+				}
+				dsty += stride;
+				if (line & 1)
+					dstv += (stride >> 1);
+				else
+					dstu += (stride >> 1);
+			}
+	}
+	else {
+		/* Compressed; the decompressor routines will write the data
+		   in planar format immediately.
+		 */
+		int flags;
+
+		flags = PWCX_FLAG_PLANAR;
+		if (pdev->vsize == PSZ_VGA && pdev->vframes == 5 && pdev->vsnapshot)
+		 {
+		   printk(KERN_ERR "pwc: Mode Bayer is not supported for now\n");
+		   flags |= PWCX_FLAG_BAYER;
+		   return -ENXIO; /* No such device or address: missing decompressor */
+		 }
+
+#if 0
+		switch (pdev->type)
+		 {
+		  case 675:
+		  case 680:
+		  case 690:
+		  case 720:
+		  case 730:
+		  case 740:
+		  case 750:
+		    pwc_dec23_decompress(&pdev->image, &pdev->view,
+				&pdev->offset, yuv, image, flags,
+				pdev->decompress_data, pdev->vbandlength);
+		    break;
+		  case 645:
+		  case 646:
+		    /* TODO & FIXME */
+		    return -ENXIO; /* Missing decompressor */
+		    break;
+		 }
+#endif
+	}
+	return 0;
+}
+
+
diff --git a/drivers/media/video/pwc/pwc-uncompress.h b/drivers/media/video/pwc/pwc-uncompress.h
new file mode 100644
index 000000000000..f75e1b6cbe19
--- /dev/null
+++ b/drivers/media/video/pwc/pwc-uncompress.h
@@ -0,0 +1,41 @@
+/* (C) 1999-2003 Nemosoft Unv.
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+/* This file is the bridge between the kernel module and the plugin; it
+   describes the structures and datatypes used in both modules. Any
+   significant change should be reflected by increasing the
+   pwc_decompressor_version major number.
+ */
+#ifndef PWC_UNCOMPRESS_H
+#define PWC_UNCOMPRESS_H
+
+#include <linux/config.h>
+
+#include "pwc-ioctl.h"
+
+/* from pwc-dec.h */
+#define PWCX_FLAG_PLANAR        0x0001
+/* */
+
+#endif
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
new file mode 100644
index 000000000000..1b0ee0ced0ed
--- /dev/null
+++ b/drivers/media/video/pwc/pwc.h
@@ -0,0 +1,272 @@
+/* (C) 1999-2003 Nemosoft Unv.
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef PWC_H
+#define PWC_H
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/spinlock.h>
+#include <linux/videodev.h>
+#include <linux/wait.h>
+#include <linux/smp_lock.h>
+#include <asm/semaphore.h>
+#include <asm/errno.h>
+
+#include "pwc-uncompress.h"
+#include "pwc-ioctl.h"
+
+/* Defines and structures for the Philips webcam */
+/* Used for checking memory corruption/pointer validation */
+#define PWC_MAGIC 0x89DC10ABUL
+#undef PWC_MAGIC
+
+/* Turn some debugging options on/off */
+#define PWC_DEBUG 0
+
+/* Trace certain actions in the driver */
+#define TRACE_MODULE	0x0001
+#define TRACE_PROBE	0x0002
+#define TRACE_OPEN	0x0004
+#define TRACE_READ	0x0008
+#define TRACE_MEMORY	0x0010
+#define TRACE_FLOW	0x0020
+#define TRACE_SIZE	0x0040
+#define TRACE_PWCX	0x0080
+#define TRACE_SEQUENCE	0x1000
+
+#define Trace(R, A...) if (pwc_trace & R) printk(KERN_DEBUG PWC_NAME " " A)
+#define Debug(A...) printk(KERN_DEBUG PWC_NAME " " A)
+#define Info(A...)  printk(KERN_INFO  PWC_NAME " " A)
+#define Err(A...)   printk(KERN_ERR   PWC_NAME " " A)
+
+
+/* Defines for ToUCam cameras */
+#define TOUCAM_HEADER_SIZE		8
+#define TOUCAM_TRAILER_SIZE		4
+
+#define FEATURE_MOTOR_PANTILT		0x0001
+
+/* Version block */
+#define PWC_MAJOR	9
+#define PWC_MINOR	0
+#define PWC_VERSION 	"9.0.2-unofficial"
+#define PWC_NAME 	"pwc"
+
+/* Turn certain features on/off */
+#define PWC_INT_PIPE 0
+
+/* Ignore errors in the first N frames, to allow for startup delays */
+#define FRAME_LOWMARK 5
+
+/* Size and number of buffers for the ISO pipe. */
+#define MAX_ISO_BUFS		2
+#define ISO_FRAMES_PER_DESC	10
+#define ISO_MAX_FRAME_SIZE	960
+#define ISO_BUFFER_SIZE 	(ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE)
+
+/* Frame buffers: contains compressed or uncompressed video data. */
+#define MAX_FRAMES		5
+/* Maximum size after decompression is 640x480 YUV data, 1.5 * 640 * 480 */
+#define PWC_FRAME_SIZE 		(460800 + TOUCAM_HEADER_SIZE + TOUCAM_TRAILER_SIZE)
+
+/* Absolute maximum number of buffers available for mmap() */
+#define MAX_IMAGES 		10
+
+/* The following structures were based on cpia.h. Why reinvent the wheel? :-) */
+struct pwc_iso_buf
+{
+	void *data;
+	int  length;
+	int  read;
+	struct urb *urb;
+};
+
+/* intermediate buffers with raw data from the USB cam */
+struct pwc_frame_buf
+{
+   void *data;
+   volatile int filled;		/* number of bytes filled */
+   struct pwc_frame_buf *next;	/* list */
+#if PWC_DEBUG
+   int sequence;		/* Sequence number */
+#endif
+};
+
+struct pwc_device
+{
+   struct video_device *vdev;
+#ifdef PWC_MAGIC
+   int magic;
+#endif
+   /* Pointer to our usb_device */
+   struct usb_device *udev;
+
+   int type;                    /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
+   int release;			/* release number */
+   int features;		/* feature bits */
+   char serial[30];		/* serial number (string) */
+   int error_status;		/* set when something goes wrong with the cam (unplugged, USB errors) */
+   int usb_init;		/* set when the cam has been initialized over USB */
+
+   /*** Video data ***/
+   int vopen;			/* flag */
+   int vendpoint;		/* video isoc endpoint */
+   int vcinterface;		/* video control interface */
+   int valternate;		/* alternate interface needed */
+   int vframes, vsize;		/* frames-per-second & size (see PSZ_*) */
+   int vpalette;		/* palette: 420P, RAW or RGBBAYER */
+   int vframe_count;		/* received frames */
+   int vframes_dumped; 		/* counter for dumped frames */
+   int vframes_error;		/* frames received in error */
+   int vmax_packet_size;	/* USB maxpacket size */
+   int vlast_packet_size;	/* for frame synchronisation */
+   int visoc_errors;		/* number of contiguous ISOC errors */
+   int vcompression;		/* desired compression factor */
+   int vbandlength;		/* compressed band length; 0 is uncompressed */
+   char vsnapshot;		/* snapshot mode */
+   char vsync;			/* used by isoc handler */
+   char vmirror;		/* for ToUCaM series */
+
+   int cmd_len;
+   unsigned char cmd_buf[13];
+
+   /* The image acquisition requires 3 to 4 steps:
+      1. data is gathered in short packets from the USB controller
+      2. data is synchronized and packed into a frame buffer
+      3a. in case data is compressed, decompress it directly into image buffer
+      3b. in case data is uncompressed, copy into image buffer with viewport
+      4. data is transferred to the user process
+
+      Note that MAX_ISO_BUFS != MAX_FRAMES != MAX_IMAGES....
+      We have in effect a back-to-back-double-buffer system.
+    */
+   /* 1: isoc */
+   struct pwc_iso_buf sbuf[MAX_ISO_BUFS];
+   char iso_init;
+
+   /* 2: frame */
+   struct pwc_frame_buf *fbuf;	/* all frames */
+   struct pwc_frame_buf *empty_frames, *empty_frames_tail;	/* all empty frames */
+   struct pwc_frame_buf *full_frames, *full_frames_tail;	/* all filled frames */
+   struct pwc_frame_buf *fill_frame;	/* frame currently being filled */
+   struct pwc_frame_buf *read_frame;	/* frame currently read by user process */
+   int frame_header_size, frame_trailer_size;
+   int frame_size;
+   int frame_total_size; /* including header & trailer */
+   int drop_frames;
+#if PWC_DEBUG
+   int sequence;			/* Debugging aid */
+#endif
+
+   /* 3: decompression */
+   struct pwc_decompressor *decompressor;	/* function block with decompression routines */
+   void *decompress_data;		/* private data for decompression engine */
+
+   /* 4: image */
+   /* We have an 'image' and a 'view', where 'image' is the fixed-size image
+      as delivered by the camera, and 'view' is the size requested by the
+      program. The camera image is centered in this viewport, laced with
+      a gray or black border. view_min <= image <= view <= view_max;
+    */
+   int image_mask;			/* bitmask of supported sizes */
+   struct pwc_coord view_min, view_max;	/* minimum and maximum viewable sizes */
+   struct pwc_coord abs_max;            /* maximum supported size with compression */
+   struct pwc_coord image, view;	/* image and viewport size */
+   struct pwc_coord offset;		/* offset within the viewport */
+
+   void *image_data;			/* total buffer, which is subdivided into ... */
+   void *image_ptr[MAX_IMAGES];		/* ...several images... */
+   int fill_image;			/* ...which are rotated. */
+   int len_per_image;			/* length per image */
+   int image_read_pos;			/* In case we read data in pieces, keep track of were we are in the imagebuffer */
+   int image_used[MAX_IMAGES];		/* For MCAPTURE and SYNC */
+
+   struct semaphore modlock;		/* to prevent races in video_open(), etc */
+   spinlock_t ptrlock;			/* for manipulating the buffer pointers */
+
+   /*** motorized pan/tilt feature */
+   struct pwc_mpt_range angle_range;
+   int pan_angle;			/* in degrees * 100 */
+   int tilt_angle;			/* absolute angle; 0,0 is home position */
+
+   /*** Misc. data ***/
+   wait_queue_head_t frameq;		/* When waiting for a frame to finish... */
+#if PWC_INT_PIPE
+   void *usb_int_handler;		/* for the interrupt endpoint */
+#endif
+};
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Global variable */
+extern int pwc_trace;
+
+/** functions in pwc-if.c */
+int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot);
+
+/** Functions in pwc-misc.c */
+/* sizes in pixels */
+extern struct pwc_coord pwc_image_sizes[PSZ_MAX];
+
+int pwc_decode_size(struct pwc_device *pdev, int width, int height);
+void pwc_construct(struct pwc_device *pdev);
+
+/** Functions in pwc-ctrl.c */
+/* Request a certain video mode. Returns < 0 if not possible */
+extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot);
+
+/* Various controls; should be obvious. Value 0..65535, or < 0 on error */
+extern int pwc_get_brightness(struct pwc_device *pdev);
+extern int pwc_set_brightness(struct pwc_device *pdev, int value);
+extern int pwc_get_contrast(struct pwc_device *pdev);
+extern int pwc_set_contrast(struct pwc_device *pdev, int value);
+extern int pwc_get_gamma(struct pwc_device *pdev);
+extern int pwc_set_gamma(struct pwc_device *pdev, int value);
+extern int pwc_get_saturation(struct pwc_device *pdev);
+extern int pwc_set_saturation(struct pwc_device *pdev, int value);
+extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
+extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor);
+
+/* Power down or up the camera; not supported by all models */
+extern int pwc_camera_power(struct pwc_device *pdev, int power);
+
+/* Private ioctl()s; see pwc-ioctl.h */
+extern int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg);
+
+
+/** pwc-uncompress.c */
+/* Expand frame to image, possibly including decompression. Uses read_frame and fill_image */
+extern int pwc_decompress(struct pwc_device *pdev);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
diff --git a/drivers/media/video/rds.h b/drivers/media/video/rds.h
deleted file mode 100644
index 0d30eb744e61..000000000000
--- a/drivers/media/video/rds.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-
-    Types and defines needed for RDS. This is included by
-    saa6588.c and every driver (e.g. bttv-driver.c) that wants
-    to use the saa6588 module.
-
-    Instead of having a seperate rds.h, I'd prefer to include
-    this stuff in one of the already existing files like tuner.h
-
-    (c) 2005 by Hans J. Koch
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef _RDS_H
-#define _RDS_H
-
-struct rds_command {
-	unsigned int  block_count;
-	int           result;
-	unsigned char __user *buffer;
-	struct file   *instance;
-	poll_table    *event_list;
-};
-
-#define RDS_CMD_OPEN	_IOW('R',1,int)
-#define RDS_CMD_CLOSE	_IOW('R',2,int)
-#define RDS_CMD_READ	_IOR('R',3,int)
-#define RDS_CMD_POLL	_IOR('R',4,int)
-
-#endif
-
-
-
-
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index a9f3cf0b1e3c..531e9461cb66 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -71,7 +71,7 @@
 #define NUM_BUFS 8
 #define IF_NAME "SAA5249"
 
-static const int disp_modes[8][3] = 
+static const int disp_modes[8][3] =
 {
 	{ 0x46, 0x03, 0x03 },	/* DISPOFF */
 	{ 0x46, 0xcc, 0xcc },	/* DISPNORM */
@@ -150,8 +150,8 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind)
 	client=kmalloc(sizeof(*client), GFP_KERNEL);
 	if(client==NULL)
 		return -ENOMEM;
-        client_template.adapter = adap;
-        client_template.addr = addr;
+	client_template.adapter = adap;
+	client_template.addr = addr;
 	memcpy(client, &client_template, sizeof(*client));
 	t = kzalloc(sizeof(*t), GFP_KERNEL);
 	if(t==NULL)
@@ -161,11 +161,11 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind)
 	}
 	strlcpy(client->name, IF_NAME, I2C_NAME_SIZE);
 	mutex_init(&t->lock);
-	
+
 	/*
 	 *	Now create a video4linux device
 	 */
-	 
+
 	vd = kmalloc(sizeof(struct video_device), GFP_KERNEL);
 	if(vd==NULL)
 	{
@@ -175,8 +175,8 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind)
 	}
 	i2c_set_clientdata(client, vd);
 	memcpy(vd, &saa_template, sizeof(*vd));
-		
-	for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) 
+
+	for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++)
 	{
 		memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf));
 		memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs));
@@ -186,9 +186,9 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind)
 		t->vdau[pgbuf].stopped = TRUE;
 		t->is_searching[pgbuf] = FALSE;
 	}
-	vd->priv=t;	
-	 
-	
+	vd->priv=t;
+
+
 	/*
 	 *	Register it
 	 */
@@ -208,7 +208,7 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind)
 /*
  *	We do most of the hard work when we become a device on the i2c.
  */
- 
+
 static int saa5249_probe(struct i2c_adapter *adap)
 {
 	if (adap->class & I2C_CLASS_TV_ANALOG)
@@ -229,7 +229,7 @@ static int saa5249_detach(struct i2c_client *client)
 
 /* new I2C driver support */
 
-static struct i2c_driver i2c_driver_videotext = 
+static struct i2c_driver i2c_driver_videotext =
 {
 	.driver = {
 		.name 	= IF_NAME,		/* name */
@@ -249,7 +249,7 @@ static struct i2c_client client_template = {
  *	delay may be longer.
  */
 
-static void jdelay(unsigned long delay) 
+static void jdelay(unsigned long delay)
 {
 	sigset_t oldblocked = current->blocked;
 
@@ -269,14 +269,14 @@ static void jdelay(unsigned long delay)
 /*
  *	I2C interfaces
  */
- 
-static int i2c_sendbuf(struct saa5249_device *t, int reg, int count, u8 *data) 
+
+static int i2c_sendbuf(struct saa5249_device *t, int reg, int count, u8 *data)
 {
 	char buf[64];
-	
+
 	buf[0] = reg;
 	memcpy(buf+1, data, count);
-	
+
 	if(i2c_master_send(t->client, buf, count+1)==count+1)
 		return 0;
 	return -1;
@@ -289,7 +289,7 @@ static int i2c_senddata(struct saa5249_device *t, ...)
 	int ct=0;
 	va_list argp;
 	va_start(argp,t);
-	
+
 	while((v=va_arg(argp,int))!=-1)
 		buf[ct++]=v;
 	return i2c_sendbuf(t, buf[0], ct-1, buf+1);
@@ -301,7 +301,7 @@ static int i2c_senddata(struct saa5249_device *t, ...)
  * Returns -1 if I�C-device didn't send acknowledge, 0 otherwise
  */
 
-static int i2c_getdata(struct saa5249_device *t, int count, u8 *buf) 
+static int i2c_getdata(struct saa5249_device *t, int count, u8 *buf)
 {
 	if(i2c_master_recv(t->client, buf, count)!=count)
 		return -1;
@@ -320,9 +320,9 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 	struct video_device *vd = video_devdata(file);
 	struct saa5249_device *t=vd->priv;
 
-	switch(cmd) 
+	switch(cmd)
 	{
-		case VTXIOCGETINFO: 
+		case VTXIOCGETINFO:
 		{
 			vtx_info_t *info = arg;
 			info->version_major = VTX_VER_MAJ;
@@ -332,10 +332,10 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 			return 0;
 		}
 
-		case VTXIOCCLRPAGE: 
+		case VTXIOCCLRPAGE:
 		{
 			vtx_pagereq_t *req = arg;
-      
+
 			if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
 				return -EINVAL;
 			memset(t->vdau[req->pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf));
@@ -343,17 +343,17 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 			return 0;
 		}
 
-		case VTXIOCCLRFOUND: 
+		case VTXIOCCLRFOUND:
 		{
 			vtx_pagereq_t *req = arg;
-      
+
 			if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
 				return -EINVAL;
 			t->vdau[req->pgbuf].clrfound = TRUE;
 			return 0;
 		}
 
-		case VTXIOCPAGEREQ: 
+		case VTXIOCPAGEREQ:
 		{
 			vtx_pagereq_t *req = arg;
 			if (!(req->pagemask & PGMASK_PAGE))
@@ -381,7 +381,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 			return 0;
 		}
 
-		case VTXIOCGETSTAT: 
+		case VTXIOCGETSTAT:
 		{
 			vtx_pagereq_t *req = arg;
 			u8 infobits[10];
@@ -390,7 +390,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 
 			if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
 				return -EINVAL;
-			if (!t->vdau[req->pgbuf].stopped) 
+			if (!t->vdau[req->pgbuf].stopped)
 			{
 				if (i2c_senddata(t, 2, 0, -1) ||
 					i2c_sendbuf(t, 3, sizeof(t->vdau[0].sregs), t->vdau[req->pgbuf].sregs) ||
@@ -403,7 +403,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 					return -EIO;
 
 				if (!(infobits[8] & 0x10) && !(infobits[7] & 0xf0) &&	/* check FOUND-bit */
-					(memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) || 
+					(memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) ||
 					time_after_eq(jiffies, t->vdau[req->pgbuf].expire)))
 				{		/* check if new page arrived */
 					if (i2c_senddata(t, 8, 0, 0, 0, -1) ||
@@ -411,7 +411,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 						return -EIO;
 					t->vdau[req->pgbuf].expire = jiffies + PGBUF_EXPIRE;
 					memset(t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE, ' ', VTX_VIRTUALSIZE - VTX_PAGESIZE);
-					if (t->virtual_mode) 
+					if (t->virtual_mode)
 					{
 						/* Packet X/24 */
 						if (i2c_senddata(t, 8, 0, 0x20, 0, -1) ||
@@ -459,9 +459,9 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 			info.notfound = !!(infobits[8] & 0x10);
 			info.pblf = !!(infobits[9] & 0x20);
 			info.hamming = 0;
-			for (a = 0; a <= 7; a++) 
+			for (a = 0; a <= 7; a++)
 			{
-				if (infobits[a] & 0xf0) 
+				if (infobits[a] & 0xf0)
 				{
 					info.hamming = 1;
 					break;
@@ -471,14 +471,14 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 				info.notfound = 1;
 			if(copy_to_user(req->buffer, &info, sizeof(vtx_pageinfo_t)))
 				return -EFAULT;
-			if (!info.hamming && !info.notfound) 
+			if (!info.hamming && !info.notfound)
 			{
 				t->is_searching[req->pgbuf] = FALSE;
 			}
 			return 0;
 		}
 
-		case VTXIOCGETPAGE: 
+		case VTXIOCGETPAGE:
 		{
 			vtx_pagereq_t *req = arg;
 			int start, end;
@@ -488,15 +488,15 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 				return -EINVAL;
 			if(copy_to_user(req->buffer, &t->vdau[req->pgbuf].pgbuf[req->start], req->end - req->start + 1))
 				return -EFAULT;
-				
-			 /* 
+
+			 /*
 			  *	Always read the time directly from SAA5249
 			  */
-			  
-			if (req->start <= 39 && req->end >= 32) 
+
+			if (req->start <= 39 && req->end >= 32)
 			{
 				int len;
-				char buf[16];  
+				char buf[16];
 				start = max(req->start, 32);
 				end = min(req->end, 39);
 				len=end-start+1;
@@ -507,7 +507,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 					return -EFAULT;
 			}
 			/* Insert the current header if DAU is still searching for a page */
-			if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf]) 
+			if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf])
 			{
 				char buf[32];
 				int len;
@@ -523,7 +523,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 			return 0;
 		}
 
-		case VTXIOCSTOPDAU: 
+		case VTXIOCSTOPDAU:
 		{
 			vtx_pagereq_t *req = arg;
 
@@ -534,12 +534,12 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 			return 0;
 		}
 
-		case VTXIOCPUTPAGE: 
-		case VTXIOCSETDISP: 
-		case VTXIOCPUTSTAT: 
+		case VTXIOCPUTPAGE:
+		case VTXIOCSETDISP:
+		case VTXIOCPUTSTAT:
 			return 0;
-			
-		case VTXIOCCLRCACHE: 
+
+		case VTXIOCCLRCACHE:
 		{
 			if (i2c_senddata(t, 0, NUM_DAUS, 0, 8, -1) || i2c_senddata(t, 11,
 				' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',
@@ -551,7 +551,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file,
 			return 0;
 		}
 
-		case VTXIOCSETVIRT: 
+		case VTXIOCSETVIRT:
 		{
 			/* The SAA5249 has virtual-row reception turned on always */
 			t->virtual_mode = (int)(long)arg;
@@ -612,14 +612,14 @@ static inline unsigned int vtx_fix_command(unsigned int cmd)
 /*
  *	Handle the locking
  */
- 
+
 static int saa5249_ioctl(struct inode *inode, struct file *file,
-			 unsigned int cmd, unsigned long arg) 
+			 unsigned int cmd, unsigned long arg)
 {
 	struct video_device *vd = video_devdata(file);
 	struct saa5249_device *t=vd->priv;
 	int err;
-	
+
 	cmd = vtx_fix_command(cmd);
 	mutex_lock(&t->lock);
 	err = video_usercopy(inode,file,cmd,arg,do_saa5249_ioctl);
@@ -627,7 +627,7 @@ static int saa5249_ioctl(struct inode *inode, struct file *file,
 	return err;
 }
 
-static int saa5249_open(struct inode *inode, struct file *file) 
+static int saa5249_open(struct inode *inode, struct file *file)
 {
 	struct video_device *vd = video_devdata(file);
 	struct saa5249_device *t=vd->priv;
@@ -636,7 +636,7 @@ static int saa5249_open(struct inode *inode, struct file *file)
 	err = video_exclusive_open(inode,file);
 	if (err < 0)
 		return err;
-	
+
 	if (t->client==NULL) {
 		err = -ENODEV;
 		goto fail;
@@ -647,13 +647,13 @@ static int saa5249_open(struct inode *inode, struct file *file)
 		i2c_senddata(t, 1, disp_modes[t->disp_mode][0], 0, -1) ||
 						/* Display TV-picture, no virtual rows */
 		i2c_senddata(t, 4, NUM_DAUS, disp_modes[t->disp_mode][1], disp_modes[t->disp_mode][2], 7, -1)) /* Set display to page 4 */
-	
+
 	{
 		err = -EIO;
 		goto fail;
 	}
 
-	for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) 
+	for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++)
 	{
 		memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf));
 		memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs));
@@ -673,7 +673,7 @@ static int saa5249_open(struct inode *inode, struct file *file)
 
 
 
-static int saa5249_release(struct inode *inode, struct file *file) 
+static int saa5249_release(struct inode *inode, struct file *file)
 {
 	struct video_device *vd = video_devdata(file);
 	struct saa5249_device *t=vd->priv;
@@ -690,7 +690,7 @@ static int __init init_saa_5249 (void)
 	return i2c_add_driver(&i2c_driver_videotext);
 }
 
-static void __exit cleanup_saa_5249 (void) 
+static void __exit cleanup_saa_5249 (void)
 {
 	i2c_del_driver(&i2c_driver_videotext);
 }
diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c
index d17395c4f55c..a81285ca7d5b 100644
--- a/drivers/media/video/saa6588.c
+++ b/drivers/media/video/saa6588.c
@@ -32,7 +32,7 @@
 #include <asm/uaccess.h>
 
 
-#include "rds.h"
+#include <media/rds.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = {
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index e18ea268384b..41d951db6ec0 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -139,7 +139,7 @@ saa7110_read (struct i2c_client *client)
 
 static int
 saa7110_selmux (struct i2c_client *client,
-	        int                chan)
+		int                chan)
 {
 	static const unsigned char modes[9][8] = {
 		/* mode 0 */
@@ -457,7 +457,7 @@ static unsigned short normal_i2c[] = {
 };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,
diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c
index f9ba0c943adf..686fd4746205 100644
--- a/drivers/media/video/saa7111.c
+++ b/drivers/media/video/saa7111.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * saa7111 - Philips SAA7111A video decoder driver version 0.0.3
  *
  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
@@ -482,7 +482,7 @@ saa7111_command (struct i2c_client *client,
 static unsigned short normal_i2c[] = { I2C_SAA7111 >> 1, I2C_CLIENT_END };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,
diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c
index 4a1f841d0c77..90398ab8252e 100644
--- a/drivers/media/video/saa7114.c
+++ b/drivers/media/video/saa7114.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * saa7114 - Philips SAA7114H video decoder driver version 0.0.1
  *
  * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
@@ -300,7 +300,7 @@ static const unsigned char init[] = {
 	0x55, 0xff,
 	0x56, 0xff,
 	0x57, 0xff,
-	0x58, 0x40,		// framing code 
+	0x58, 0x40,		// framing code
 	0x59, 0x47,		// horizontal offset
 	0x5a, 0x06,		// vertical offset
 	0x5b, 0x83,		// field offset
@@ -345,7 +345,7 @@ static const unsigned char init[] = {
 	0x82, 0x00,
 	0x83, 0x00,
 	0x84, 0xc5,
-	0x85, 0x0d,		// hsync and vsync ? 
+	0x85, 0x0d,		// hsync and vsync ?
 	0x86, 0x40,
 	0x87, 0x01,
 	0x88, 0x00,
@@ -434,7 +434,7 @@ static const unsigned char init[] = {
 	0xd9, 0x04,
 	0xda, 0x00,		// horizontal luminance phase offset
 	0xdb, 0x00,
-	0xdc, 0x00,		// horizontal chrominance scaling increment 
+	0xdc, 0x00,		// horizontal chrominance scaling increment
 	0xdd, 0x02,
 	0xde, 0x00,		// horizontal chrominance phase offset
 	0xdf, 0x00,
@@ -754,7 +754,7 @@ saa7114_command (struct i2c_client *client,
 			saa7114_write(client, 0x87,
 				      decoder->reg[REG_ADDR(0x87)]);
 			saa7114_write(client, 0x88, 0xd8);	// sw reset scaler
-			saa7114_write(client, 0x88, 0xf8);	// sw reset scaler release            
+			saa7114_write(client, 0x88, 0xf8);	// sw reset scaler release
 			saa7114_write(client, 0x80, 0x36);
 
 		}
@@ -813,7 +813,7 @@ static unsigned short normal_i2c[] =
     { I2C_SAA7114 >> 1, I2C_SAA7114A >> 1, I2C_CLIENT_END };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index b184fd00b4e7..b05015282601 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -40,7 +40,6 @@
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
 #include <asm/div64.h>
 
 MODULE_DESCRIPTION("Philips SAA7113/SAA7114/SAA7115 video decoder driver");
diff --git a/drivers/media/video/saa7121.h b/drivers/media/video/saa7121.h
index 74e37d405208..66967ae37494 100644
--- a/drivers/media/video/saa7121.h
+++ b/drivers/media/video/saa7121.h
@@ -64,7 +64,7 @@
 #define PAL_MSB_VERTICAL	0x40	/* 7c */
 
 /* Initialization Sequence */
-	 
+
 static __u8 init7121ntsc[] = {
 	0x26, 0x0,	0x27, 0x0,
 	0x28, NTSC_BURST_START,		0x29, NTSC_BURST_END,
@@ -95,7 +95,7 @@ static __u8 init7121ntsc[] = {
 	0x78, 0x0,	0x79, 0x0,	0x7a, NTSC_FIRST_ACTIVE,
 	0x7b, NTSC_LAST_ACTIVE,		0x7c, NTSC_MSB_VERTICAL,
 	0x7d, 0x0,	0x7e, 0x0,	0x7f, 0x0
-}; 
+};
 #define INIT7121LEN	(sizeof(init7121ntsc)/2)
 
 static __u8 init7121pal[] = {
@@ -128,5 +128,5 @@ static __u8 init7121pal[] = {
 	0x78, 0x0,	0x79, 0x0,	0x7a, PAL_FIRST_ACTIVE,
 	0x7b, PAL_LAST_ACTIVE,		0x7c, PAL_MSB_VERTICAL,
 	0x7d, 0x0,	0x7e, 0x0,	0x7f, 0x0
-}; 
+};
 #endif
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index aca84d2f9825..bb3e0ba946d3 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -507,7 +507,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream,
 	/* release the old buffer */
 	if (substream->runtime->dma_area) {
 		saa7134_pgtable_free(dev->pci, &dev->dmasound.pt);
-		videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma);
+		videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma);
 		dsp_buffer_free(dev);
 		substream->runtime->dma_area = NULL;
 	}
@@ -523,12 +523,12 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream,
 		return err;
 	}
 
-	if (0 != (err = videobuf_dma_pci_map(dev->pci, &dev->dmasound.dma))) {
+	if (0 != (err = videobuf_pci_dma_map(dev->pci, &dev->dmasound.dma))) {
 		dsp_buffer_free(dev);
 		return err;
 	}
 	if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) {
-		videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma);
+		videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma);
 		dsp_buffer_free(dev);
 		return err;
 	}
@@ -537,7 +537,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream,
 						dev->dmasound.dma.sglen,
 						0))) {
 		saa7134_pgtable_free(dev->pci, &dev->dmasound.pt);
-		videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma);
+		videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma);
 		dsp_buffer_free(dev);
 		return err;
 	}
@@ -571,7 +571,7 @@ static int snd_card_saa7134_hw_free(struct snd_pcm_substream * substream)
 
 	if (substream->runtime->dma_area) {
 		saa7134_pgtable_free(dev->pci, &dev->dmasound.pt);
-		videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma);
+		videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma);
 		dsp_buffer_free(dev);
 		substream->runtime->dma_area = NULL;
 	}
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 58e568d7d2ee..c98571c9d5a6 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -254,12 +254,12 @@ void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt)
 
 /* ------------------------------------------------------------------ */
 
-void saa7134_dma_free(struct saa7134_dev *dev,struct saa7134_buf *buf)
+void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf)
 {
 	BUG_ON(in_interrupt());
 
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_pci_unmap(dev->pci, &buf->vb.dma);
+	videobuf_dma_unmap(q, &buf->vb.dma);
 	videobuf_dma_free(&buf->vb.dma);
 	buf->vb.state = STATE_NEEDS_INIT;
 }
@@ -960,7 +960,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	if (saa7134_no_overlay <= 0) {
 		saa7134_video_template.type |= VID_TYPE_OVERLAY;
 	} else {
-		printk("bttv: Overlay support disabled.\n");
+		printk("%s: Overlay support disabled.\n",dev->name);
 	}
 	dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
 	err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c
index d79d05f88705..7aa02b34e012 100644
--- a/drivers/media/video/saa7134/saa7134-oss.c
+++ b/drivers/media/video/saa7134/saa7134-oss.c
@@ -124,7 +124,7 @@ static int dsp_rec_start(struct saa7134_dev *dev)
 	unsigned long flags;
 
 	/* prepare buffer */
-	if (0 != (err = videobuf_dma_pci_map(dev->pci,&dev->dmasound.dma)))
+	if (0 != (err = videobuf_pci_dma_map(dev->pci,&dev->dmasound.dma)))
 		return err;
 	if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt)))
 		goto fail1;
@@ -213,7 +213,7 @@ static int dsp_rec_start(struct saa7134_dev *dev)
  fail2:
 	saa7134_pgtable_free(dev->pci,&dev->dmasound.pt);
  fail1:
-	videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma);
+	videobuf_pci_dma_unmap(dev->pci,&dev->dmasound.dma);
 	return err;
 }
 
@@ -231,7 +231,7 @@ static int dsp_rec_stop(struct saa7134_dev *dev)
 
 	/* unlock buffer */
 	saa7134_pgtable_free(dev->pci,&dev->dmasound.pt);
-	videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma);
+	videobuf_pci_dma_unmap(dev->pci,&dev->dmasound.dma);
 	return 0;
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c
index 470903e2f5e5..60a90a2617ae 100644
--- a/drivers/media/video/saa7134/saa7134-ts.c
+++ b/drivers/media/video/saa7134/saa7134-ts.c
@@ -89,7 +89,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 		return -EINVAL;
 
 	if (buf->vb.size != size) {
-		saa7134_dma_free(dev,buf);
+		saa7134_dma_free(q,buf);
 	}
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
@@ -98,7 +98,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 		buf->vb.size   = size;
 		buf->pt        = &dev->ts.pt_ts;
 
-		err = videobuf_iolock(dev->pci,&buf->vb,NULL);
+		err = videobuf_iolock(q,&buf->vb,NULL);
 		if (err)
 			goto oops;
 		err = saa7134_pgtable_build(dev->pci,buf->pt,
@@ -126,7 +126,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	return 0;
 
  oops:
-	saa7134_dma_free(dev,buf);
+	saa7134_dma_free(q,buf);
 	return err;
 }
 
@@ -152,10 +152,9 @@ static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
 
 static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 {
-	struct saa7134_dev *dev = q->priv_data;
 	struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb);
 
-	saa7134_dma_free(dev,buf);
+	saa7134_dma_free(q,buf);
 }
 
 struct videobuf_queue_ops saa7134_ts_qops = {
diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c
index 3043233a8b6e..0db53d192b2a 100644
--- a/drivers/media/video/saa7134/saa7134-tvaudio.c
+++ b/drivers/media/video/saa7134/saa7134-tvaudio.c
@@ -482,12 +482,14 @@ static int tvaudio_setstereo(struct saa7134_dev *dev, struct saa7134_tvaudio *au
 		[ V4L2_TUNER_MODE_STEREO ] = "stereo",
 		[ V4L2_TUNER_MODE_LANG1  ] = "lang1",
 		[ V4L2_TUNER_MODE_LANG2  ] = "lang2",
+		[ V4L2_TUNER_MODE_LANG1_LANG2  ] = "lang1+lang2",
 	};
 	static u32 fm[] = {
 		[ V4L2_TUNER_MODE_MONO   ] = 0x00,  /* ch1  */
 		[ V4L2_TUNER_MODE_STEREO ] = 0x80,  /* auto */
 		[ V4L2_TUNER_MODE_LANG1  ] = 0x00,  /* ch1  */
 		[ V4L2_TUNER_MODE_LANG2  ] = 0x01,  /* ch2  */
+		[ V4L2_TUNER_MODE_LANG1_LANG2 ] = 0x80,  /* auto */
 	};
 	u32 reg;
 
diff --git a/drivers/media/video/saa7134/saa7134-vbi.c b/drivers/media/video/saa7134/saa7134-vbi.c
index f4aee0af80e1..f38366a470fa 100644
--- a/drivers/media/video/saa7134/saa7134-vbi.c
+++ b/drivers/media/video/saa7134/saa7134-vbi.c
@@ -135,7 +135,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 		return -EINVAL;
 
 	if (buf->vb.size != size)
-		saa7134_dma_free(dev,buf);
+		saa7134_dma_free(q,buf);
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
 		buf->vb.width  = llength;
@@ -143,7 +143,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 		buf->vb.size   = size;
 		buf->pt        = &fh->pt_vbi;
 
-		err = videobuf_iolock(dev->pci,&buf->vb,NULL);
+		err = videobuf_iolock(q,&buf->vb,NULL);
 		if (err)
 			goto oops;
 		err = saa7134_pgtable_build(dev->pci,buf->pt,
@@ -159,7 +159,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 	return 0;
 
  oops:
-	saa7134_dma_free(dev,buf);
+	saa7134_dma_free(q,buf);
 	return err;
 }
 
@@ -190,11 +190,9 @@ static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
 
 static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 {
-	struct saa7134_fh *fh   = q->priv_data;
-	struct saa7134_dev *dev = fh->dev;
 	struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb);
 
-	saa7134_dma_free(dev,buf);
+	saa7134_dma_free(q,buf);
 }
 
 struct videobuf_queue_ops saa7134_vbi_qops = {
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index 57a11e71d996..aeef80f88a6b 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -993,7 +993,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 	    buf->vb.size   != size       ||
 	    buf->vb.field  != field      ||
 	    buf->fmt       != fh->fmt) {
-		saa7134_dma_free(dev,buf);
+		saa7134_dma_free(q,buf);
 	}
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
@@ -1004,7 +1004,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 		buf->fmt       = fh->fmt;
 		buf->pt        = &fh->pt_cap;
 
-		err = videobuf_iolock(dev->pci,&buf->vb,&dev->ovbuf);
+		err = videobuf_iolock(q,&buf->vb,&dev->ovbuf);
 		if (err)
 			goto oops;
 		err = saa7134_pgtable_build(dev->pci,buf->pt,
@@ -1019,7 +1019,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 	return 0;
 
  oops:
-	saa7134_dma_free(dev,buf);
+	saa7134_dma_free(q,buf);
 	return err;
 }
 
@@ -1045,10 +1045,9 @@ static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
 
 static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 {
-	struct saa7134_fh *fh = q->priv_data;
 	struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb);
 
-	saa7134_dma_free(fh->dev,buf);
+	saa7134_dma_free(q,buf);
 }
 
 static struct videobuf_queue_ops video_qops = {
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index ce1c2e0b065e..31ba293854c1 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -34,7 +34,6 @@
 #include <asm/io.h>
 
 #include <media/tuner.h>
-#include <media/audiochip.h>
 #include <media/ir-common.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/video-buf.h>
@@ -579,7 +578,7 @@ void saa7134_buffer_finish(struct saa7134_dev *dev, struct saa7134_dmaqueue *q,
 			   unsigned int state);
 void saa7134_buffer_next(struct saa7134_dev *dev, struct saa7134_dmaqueue *q);
 void saa7134_buffer_timeout(unsigned long data);
-void saa7134_dma_free(struct saa7134_dev *dev,struct saa7134_buf *buf);
+void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf);
 
 int saa7134_set_dmabits(struct saa7134_dev *dev);
 
diff --git a/drivers/media/video/saa7146.h b/drivers/media/video/saa7146.h
index 756963f01bbd..2830b5e33aec 100644
--- a/drivers/media/video/saa7146.h
+++ b/drivers/media/video/saa7146.h
@@ -1,7 +1,7 @@
-/*  
+/*
     saa7146.h - definitions philips saa7146 based cards
     Copyright (C) 1999 Nathan Laredo (laredo@gnu.org)
-    
+
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
@@ -27,7 +27,7 @@
 
 #include <linux/videodev.h>
 
-#ifndef O_NONCAP  
+#ifndef O_NONCAP
 #define O_NONCAP	O_TRUNC
 #endif
 
@@ -36,7 +36,7 @@
 
 #ifdef __KERNEL__
 
-struct saa7146_window 
+struct saa7146_window
 {
 	int x, y;
 	ushort width, height;
@@ -70,7 +70,7 @@ struct saa7146
 	int irqstate;		/* irq routine is state driven */
 	int writemode;
 	int playmode;
-        unsigned int nr;
+	unsigned int nr;
 	unsigned long irq;          /* IRQ used by SAA7146 card */
 	unsigned short id;
 	unsigned char revision;
diff --git a/drivers/media/video/saa7146reg.h b/drivers/media/video/saa7146reg.h
index 6cc910f50a4b..80ec2c146b4c 100644
--- a/drivers/media/video/saa7146reg.h
+++ b/drivers/media/video/saa7146reg.h
@@ -1,7 +1,7 @@
-/*  
+/*
     saa7146.h - definitions philips saa7146 based cards
     Copyright (C) 1999 Nathan Laredo (laredo@gnu.org)
-    
+
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
index 9f99ee1303e0..9c308410856d 100644
--- a/drivers/media/video/saa7185.c
+++ b/drivers/media/video/saa7185.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * saa7185 - Philips SAA7185B video encoder driver version 0.0.3
  *
  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
@@ -377,7 +377,7 @@ saa7185_command (struct i2c_client *client,
 static unsigned short normal_i2c[] = { I2C_SAA7185 >> 1, I2C_CLIENT_END };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,
diff --git a/drivers/media/video/saa7196.h b/drivers/media/video/saa7196.h
index f92f21cfbcac..cd4b6354a7b3 100644
--- a/drivers/media/video/saa7196.h
+++ b/drivers/media/video/saa7196.h
@@ -2,14 +2,14 @@
     Definitions for the Philips SAA7196 digital video decoder,
     scaler, and clock generator circuit (DESCpro), as used in
     the PlanB video input of the Powermac 7x00/8x00 series.
-  
+
     Copyright (C) 1998 Michel Lanners (mlan@cpu.lu)
 
     The register defines are shamelessly copied from the meteor
     driver out of NetBSD (with permission),
     and are copyrighted (c) 1995 Mark Tinguely and Jim Lowe
     (Thanks !)
-  
+
     Additional debugging and coding by Takashi Oe (toe@unlinfo.unl.edu)
 
     The default values used for PlanB are my mistakes.
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
new file mode 100644
index 000000000000..a846ebc78cd7
--- /dev/null
+++ b/drivers/media/video/se401.c
@@ -0,0 +1,1435 @@
+/*
+ * Endpoints (formerly known as AOX) se401 USB Camera Driver
+ *
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * Still somewhat based on the Linux ov511 driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * Thanks to Endpoints Inc. (www.endpoints.com) for making documentation on
+ * their chipset available and supporting me while writing this driver.
+ * 	- Jeroen Vreeken
+ */
+
+static const char version[] = "0.24";
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/usb.h>
+#include "se401.h"
+
+static int flickerless=0;
+static int video_nr = -1;
+
+static struct usb_device_id device_table [] = {
+	{ USB_DEVICE(0x03e8, 0x0004) },/* Endpoints/Aox SE401 */
+	{ USB_DEVICE(0x0471, 0x030b) },/* Philips PCVC665K */
+	{ USB_DEVICE(0x047d, 0x5001) },/* Kensington 67014 */
+	{ USB_DEVICE(0x047d, 0x5002) },/* Kensington 6701(5/7) */
+	{ USB_DEVICE(0x047d, 0x5003) },/* Kensington 67016 */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+MODULE_AUTHOR("Jeroen Vreeken <pe1rxq@amsat.org>");
+MODULE_DESCRIPTION("SE401 USB Camera Driver");
+MODULE_LICENSE("GPL");
+module_param(flickerless, int, 0);
+MODULE_PARM_DESC(flickerless, "Net frequency to adjust exposure time to (0/50/60)");
+module_param(video_nr, int, 0);
+
+static struct usb_driver se401_driver;
+
+
+/**********************************************************************
+ *
+ * Memory management
+ *
+ **********************************************************************/
+static void *rvmalloc(unsigned long size)
+{
+	void *mem;
+	unsigned long adr;
+
+	size = PAGE_ALIGN(size);
+	mem = vmalloc_32(size);
+	if (!mem)
+		return NULL;
+
+	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+	adr = (unsigned long) mem;
+	while (size > 0) {
+		SetPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	return mem;
+}
+
+static void rvfree(void *mem, unsigned long size)
+{
+	unsigned long adr;
+
+	if (!mem)
+		return;
+
+	adr = (unsigned long) mem;
+	while ((long) size > 0) {
+		ClearPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	vfree(mem);
+}
+
+
+
+/****************************************************************************
+ *
+ * se401 register read/write functions
+ *
+ ***************************************************************************/
+
+static int se401_sndctrl(int set, struct usb_se401 *se401, unsigned short req,
+			 unsigned short value, unsigned char *cp, int size)
+{
+	return usb_control_msg (
+		se401->dev,
+		set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0),
+		req,
+		(set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		value,
+		0,
+		cp,
+		size,
+		1000
+	);
+}
+
+static int se401_set_feature(struct usb_se401 *se401, unsigned short selector,
+			     unsigned short param)
+{
+	/* specs say that the selector (address) should go in the value field
+	   and the param in index, but in the logs of the windows driver they do
+	   this the other way around...
+	 */
+	return usb_control_msg (
+		se401->dev,
+		usb_sndctrlpipe(se401->dev, 0),
+		SE401_REQ_SET_EXT_FEATURE,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		param,
+		selector,
+		NULL,
+		0,
+		1000
+	);
+}
+
+static unsigned short se401_get_feature(struct usb_se401 *se401,
+					unsigned short selector)
+{
+	/* For 'set' the selecetor should be in index, not sure if the spec is
+	   wrong here to....
+	 */
+	unsigned char cp[2];
+	usb_control_msg (
+		se401->dev,
+		usb_rcvctrlpipe(se401->dev, 0),
+		SE401_REQ_GET_EXT_FEATURE,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		0,
+		selector,
+		cp,
+		2,
+		1000
+	);
+	return cp[0]+cp[1]*256;
+}
+
+/****************************************************************************
+ *
+ * Camera control
+ *
+ ***************************************************************************/
+
+
+static int se401_send_pict(struct usb_se401 *se401)
+{
+	se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l);/* integration time low */
+	se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m);/* integration time mid */
+	se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h);/* integration time mid */
+	se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);/* reset level value */
+	se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);/* red color gain */
+	se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);/* green color gain */
+	se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);/* blue color gain */
+
+	return 0;
+}
+
+static void se401_set_exposure(struct usb_se401 *se401, int brightness)
+{
+	int integration=brightness<<5;
+
+	if (flickerless==50) {
+		integration=integration-integration%106667;
+	}
+	if (flickerless==60) {
+		integration=integration-integration%88889;
+	}
+	se401->brightness=integration>>5;
+	se401->expose_h=(integration>>16)&0xff;
+	se401->expose_m=(integration>>8)&0xff;
+	se401->expose_l=integration&0xff;
+}
+
+static int se401_get_pict(struct usb_se401 *se401, struct video_picture *p)
+{
+	p->brightness=se401->brightness;
+	if (se401->enhance) {
+		p->whiteness=32768;
+	} else {
+		p->whiteness=0;
+	}
+	p->colour=65535;
+	p->contrast=65535;
+	p->hue=se401->rgain<<10;
+	p->palette=se401->palette;
+	p->depth=3; /* rgb24 */
+	return 0;
+}
+
+
+static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p)
+{
+	if (p->palette != VIDEO_PALETTE_RGB24)
+		return 1;
+	se401->palette=p->palette;
+	if (p->hue!=se401->hue) {
+		se401->rgain= p->hue>>10;
+		se401->bgain= 0x40-(p->hue>>10);
+		se401->hue=p->hue;
+	}
+	if (p->brightness!=se401->brightness) {
+		se401_set_exposure(se401, p->brightness);
+	}
+	if (p->whiteness>=32768) {
+		se401->enhance=1;
+	} else {
+		se401->enhance=0;
+	}
+	se401_send_pict(se401);
+	se401_send_pict(se401);
+	return 0;
+}
+
+/*
+	Hyundai have some really nice docs about this and other sensor related
+	stuff on their homepage: www.hei.co.kr
+*/
+static void se401_auto_resetlevel(struct usb_se401 *se401)
+{
+	unsigned int ahrc, alrc;
+	int oldreset=se401->resetlevel;
+
+	/* For some reason this normally read-only register doesn't get reset
+	   to zero after reading them just once...
+	 */
+	se401_get_feature(se401, HV7131_REG_HIREFNOH);
+	se401_get_feature(se401, HV7131_REG_HIREFNOL);
+	se401_get_feature(se401, HV7131_REG_LOREFNOH);
+	se401_get_feature(se401, HV7131_REG_LOREFNOL);
+	ahrc=256*se401_get_feature(se401, HV7131_REG_HIREFNOH) +
+	    se401_get_feature(se401, HV7131_REG_HIREFNOL);
+	alrc=256*se401_get_feature(se401, HV7131_REG_LOREFNOH) +
+	    se401_get_feature(se401, HV7131_REG_LOREFNOL);
+
+	/* Not an exact science, but it seems to work pretty well... */
+	if (alrc > 10) {
+		while (alrc>=10 && se401->resetlevel < 63) {
+			se401->resetlevel++;
+			alrc /=2;
+		}
+	} else if (ahrc > 20) {
+		while (ahrc>=20 && se401->resetlevel > 0) {
+			se401->resetlevel--;
+			ahrc /=2;
+		}
+	}
+	if (se401->resetlevel!=oldreset)
+		se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);
+
+	return;
+}
+
+/* irq handler for snapshot button */
+static void se401_button_irq(struct urb *urb, struct pt_regs *regs)
+{
+	struct usb_se401 *se401 = urb->context;
+	int status;
+
+	if (!se401->dev) {
+		info("ohoh: device vapourished");
+		return;
+	}
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	if (urb->actual_length >=2) {
+		if (se401->button)
+			se401->buttonpressed=1;
+	}
+exit:
+	status = usb_submit_urb (urb, GFP_ATOMIC);
+	if (status)
+		err ("%s - usb_submit_urb failed with result %d",
+		     __FUNCTION__, status);
+}
+
+static void se401_video_irq(struct urb *urb, struct pt_regs *regs)
+{
+	struct usb_se401 *se401 = urb->context;
+	int length = urb->actual_length;
+
+	/* ohoh... */
+	if (!se401->streaming)
+		return;
+
+	if (!se401->dev) {
+		info ("ohoh: device vapourished");
+		return;
+	}
+
+	/* 0 sized packets happen if we are to fast, but sometimes the camera
+	   keeps sending them forever...
+	 */
+	if (length && !urb->status) {
+		se401->nullpackets=0;
+		switch(se401->scratch[se401->scratch_next].state) {
+			case BUFFER_READY:
+			case BUFFER_BUSY: {
+				se401->dropped++;
+				break;
+			}
+			case BUFFER_UNUSED: {
+				memcpy(se401->scratch[se401->scratch_next].data, (unsigned char *)urb->transfer_buffer, length);
+				se401->scratch[se401->scratch_next].state=BUFFER_READY;
+				se401->scratch[se401->scratch_next].offset=se401->bayeroffset;
+				se401->scratch[se401->scratch_next].length=length;
+				if (waitqueue_active(&se401->wq)) {
+					wake_up_interruptible(&se401->wq);
+				}
+				se401->scratch_overflow=0;
+				se401->scratch_next++;
+				if (se401->scratch_next>=SE401_NUMSCRATCH)
+					se401->scratch_next=0;
+				break;
+			}
+		}
+		se401->bayeroffset+=length;
+		if (se401->bayeroffset>=se401->cheight*se401->cwidth) {
+			se401->bayeroffset=0;
+		}
+	} else {
+		se401->nullpackets++;
+		if (se401->nullpackets > SE401_MAX_NULLPACKETS) {
+			if (waitqueue_active(&se401->wq)) {
+				wake_up_interruptible(&se401->wq);
+			}
+		}
+	}
+
+	/* Resubmit urb for new data */
+	urb->status=0;
+	urb->dev=se401->dev;
+	if(usb_submit_urb(urb, GFP_KERNEL))
+		info("urb burned down");
+	return;
+}
+
+static void se401_send_size(struct usb_se401 *se401, int width, int height)
+{
+	int i=0;
+	int mode=0x03; /* No compression */
+	int sendheight=height;
+	int sendwidth=width;
+
+	/* JangGu compression can only be used with the camera supported sizes,
+	   but bayer seems to work with any size that fits on the sensor.
+	   We check if we can use compression with the current size with either
+	   4 or 16 times subcapturing, if not we use uncompressed bayer data
+	   but this will result in cutouts of the maximum size....
+	 */
+	while (i<se401->sizes && !(se401->width[i]==width && se401->height[i]==height))
+		i++;
+	while (i<se401->sizes) {
+		if (se401->width[i]==width*2 && se401->height[i]==height*2) {
+			sendheight=se401->height[i];
+			sendwidth=se401->width[i];
+			mode=0x40;
+		}
+		if (se401->width[i]==width*4 && se401->height[i]==height*4) {
+			sendheight=se401->height[i];
+			sendwidth=se401->width[i];
+			mode=0x42;
+		}
+		i++;
+	}
+
+	se401_sndctrl(1, se401, SE401_REQ_SET_WIDTH, sendwidth, NULL, 0);
+	se401_sndctrl(1, se401, SE401_REQ_SET_HEIGHT, sendheight, NULL, 0);
+	se401_set_feature(se401, SE401_OPERATINGMODE, mode);
+
+	if (mode==0x03) {
+		se401->format=FMT_BAYER;
+	} else {
+		se401->format=FMT_JANGGU;
+	}
+
+	return;
+}
+
+/*
+	In this function se401_send_pict is called several times,
+	for some reason (depending on the state of the sensor and the phase of
+	the moon :) doing this only in either place doesn't always work...
+*/
+static int se401_start_stream(struct usb_se401 *se401)
+{
+	struct urb *urb;
+	int err=0, i;
+	se401->streaming=1;
+
+	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
+	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
+
+	/* Set picture settings */
+	se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);/*windowed + pix intg */
+	se401_send_pict(se401);
+
+	se401_send_size(se401, se401->cwidth, se401->cheight);
+
+	se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, NULL, 0);
+
+	/* Do some memory allocation */
+	for (i=0; i<SE401_NUMFRAMES; i++) {
+		se401->frame[i].data=se401->fbuf + i * se401->maxframesize;
+		se401->frame[i].curpix=0;
+	}
+	for (i=0; i<SE401_NUMSBUF; i++) {
+		se401->sbuf[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
+	}
+
+	se401->bayeroffset=0;
+	se401->scratch_next=0;
+	se401->scratch_use=0;
+	se401->scratch_overflow=0;
+	for (i=0; i<SE401_NUMSCRATCH; i++) {
+		se401->scratch[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
+		se401->scratch[i].state=BUFFER_UNUSED;
+	}
+
+	for (i=0; i<SE401_NUMSBUF; i++) {
+		urb=usb_alloc_urb(0, GFP_KERNEL);
+		if(!urb)
+			return -ENOMEM;
+
+		usb_fill_bulk_urb(urb, se401->dev,
+			usb_rcvbulkpipe(se401->dev, SE401_VIDEO_ENDPOINT),
+			se401->sbuf[i].data, SE401_PACKETSIZE,
+			se401_video_irq,
+			se401);
+
+		se401->urb[i]=urb;
+
+		err=usb_submit_urb(se401->urb[i], GFP_KERNEL);
+		if(err)
+			err("urb burned down");
+	}
+
+	se401->framecount=0;
+
+	return 0;
+}
+
+static int se401_stop_stream(struct usb_se401 *se401)
+{
+	int i;
+
+	if (!se401->streaming || !se401->dev)
+		return 1;
+
+	se401->streaming=0;
+
+	se401_sndctrl(1, se401, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, NULL, 0);
+
+	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0);
+	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0);
+
+	for (i=0; i<SE401_NUMSBUF; i++) if (se401->urb[i]) {
+		usb_kill_urb(se401->urb[i]);
+		usb_free_urb(se401->urb[i]);
+		se401->urb[i]=NULL;
+		kfree(se401->sbuf[i].data);
+	}
+	for (i=0; i<SE401_NUMSCRATCH; i++) {
+		kfree(se401->scratch[i].data);
+		se401->scratch[i].data=NULL;
+	}
+
+	return 0;
+}
+
+static int se401_set_size(struct usb_se401 *se401, int width, int height)
+{
+	int wasstreaming=se401->streaming;
+	/* Check to see if we need to change */
+	if (se401->cwidth==width && se401->cheight==height)
+		return 0;
+
+	/* Check for a valid mode */
+	if (!width || !height)
+		return 1;
+	if ((width & 1) || (height & 1))
+		return 1;
+	if (width>se401->width[se401->sizes-1])
+		return 1;
+	if (height>se401->height[se401->sizes-1])
+		return 1;
+
+	/* Stop a current stream and start it again at the new size */
+	if (wasstreaming)
+		se401_stop_stream(se401);
+	se401->cwidth=width;
+	se401->cheight=height;
+	if (wasstreaming)
+		se401_start_stream(se401);
+	return 0;
+}
+
+
+/****************************************************************************
+ *
+ * Video Decoding
+ *
+ ***************************************************************************/
+
+/*
+	This shouldn't really be done in a v4l driver....
+	But it does make the image look a lot more usable.
+	Basically it lifts the dark pixels more than the light pixels.
+*/
+static inline void enhance_picture(unsigned char *frame, int len)
+{
+	while (len--) {
+		*frame=(((*frame^255)*(*frame^255))/255)^255;
+		frame++;
+	}
+}
+
+static inline void decode_JangGu_integrate(struct usb_se401 *se401, int data)
+{
+	struct se401_frame *frame=&se401->frame[se401->curframe];
+	int linelength=se401->cwidth*3;
+
+	if (frame->curlinepix >= linelength) {
+		frame->curlinepix=0;
+		frame->curline+=linelength;
+	}
+
+	/* First three are absolute, all others relative.
+	 * Format is rgb from right to left (mirrorred image),
+	 * we flip it to get bgr from left to right. */
+	if (frame->curlinepix < 3) {
+		*(frame->curline-frame->curlinepix)=1+data*4;
+	} else {
+		*(frame->curline-frame->curlinepix)=
+		    *(frame->curline-frame->curlinepix+3)+data*4;
+	}
+	frame->curlinepix++;
+}
+
+static inline void decode_JangGu_vlc (struct usb_se401 *se401, unsigned char *data, int bit_exp, int packetlength)
+{
+	int pos=0;
+	int vlc_cod=0;
+	int vlc_size=0;
+	int vlc_data=0;
+	int bit_cur;
+	int bit;
+	data+=4;
+	while (pos < packetlength) {
+		bit_cur=8;
+		while (bit_cur && bit_exp) {
+			bit=((*data)>>(bit_cur-1))&1;
+			if (!vlc_cod) {
+				if (bit) {
+					vlc_size++;
+				} else {
+					if (!vlc_size) {
+						decode_JangGu_integrate(se401, 0);
+					} else {
+						vlc_cod=2;
+						vlc_data=0;
+					}
+				}
+			} else {
+				if (vlc_cod==2) {
+					if (!bit)
+						vlc_data =  -(1<<vlc_size) + 1;
+					vlc_cod--;
+				}
+				vlc_size--;
+				vlc_data+=bit<<vlc_size;
+				if (!vlc_size) {
+					decode_JangGu_integrate(se401, vlc_data);
+					vlc_cod=0;
+				}
+			}
+			bit_cur--;
+			bit_exp--;
+		}
+		pos++;
+		data++;
+	}
+}
+
+static inline void decode_JangGu (struct usb_se401 *se401, struct se401_scratch *buffer)
+{
+	unsigned char *data=buffer->data;
+	int len=buffer->length;
+	int bit_exp=0, pix_exp=0, frameinfo=0, packetlength=0, size;
+	int datapos=0;
+
+	/* New image? */
+	if (!se401->frame[se401->curframe].curpix) {
+		se401->frame[se401->curframe].curlinepix=0;
+		se401->frame[se401->curframe].curline=
+		    se401->frame[se401->curframe].data+
+		    se401->cwidth*3-1;
+		if (se401->frame[se401->curframe].grabstate==FRAME_READY)
+			se401->frame[se401->curframe].grabstate=FRAME_GRABBING;
+		se401->vlcdatapos=0;
+	}
+	while (datapos < len) {
+		size=1024-se401->vlcdatapos;
+		if (size+datapos > len)
+			size=len-datapos;
+		memcpy(se401->vlcdata+se401->vlcdatapos, data+datapos, size);
+		se401->vlcdatapos+=size;
+		packetlength=0;
+		if (se401->vlcdatapos >= 4) {
+			bit_exp=se401->vlcdata[3]+(se401->vlcdata[2]<<8);
+			pix_exp=se401->vlcdata[1]+((se401->vlcdata[0]&0x3f)<<8);
+			frameinfo=se401->vlcdata[0]&0xc0;
+			packetlength=((bit_exp+47)>>4)<<1;
+			if (packetlength > 1024) {
+				se401->vlcdatapos=0;
+				datapos=len;
+				packetlength=0;
+				se401->error++;
+				se401->frame[se401->curframe].curpix=0;
+			}
+		}
+		if (packetlength && se401->vlcdatapos >= packetlength) {
+			decode_JangGu_vlc(se401, se401->vlcdata, bit_exp, packetlength);
+			se401->frame[se401->curframe].curpix+=pix_exp*3;
+			datapos+=size-(se401->vlcdatapos-packetlength);
+			se401->vlcdatapos=0;
+			if (se401->frame[se401->curframe].curpix>=se401->cwidth*se401->cheight*3) {
+				if (se401->frame[se401->curframe].curpix==se401->cwidth*se401->cheight*3) {
+					if (se401->frame[se401->curframe].grabstate==FRAME_GRABBING) {
+						se401->frame[se401->curframe].grabstate=FRAME_DONE;
+						se401->framecount++;
+						se401->readcount++;
+					}
+					if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) {
+						se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1);
+					}
+				} else {
+					se401->error++;
+				}
+				se401->frame[se401->curframe].curpix=0;
+				datapos=len;
+			}
+		} else {
+			datapos+=size;
+		}
+	}
+}
+
+static inline void decode_bayer (struct usb_se401 *se401, struct se401_scratch *buffer)
+{
+	unsigned char *data=buffer->data;
+	int len=buffer->length;
+	int offset=buffer->offset;
+	int datasize=se401->cwidth*se401->cheight;
+	struct se401_frame *frame=&se401->frame[se401->curframe];
+
+	unsigned char *framedata=frame->data, *curline, *nextline;
+	int width=se401->cwidth;
+	int blineoffset=0, bline;
+	int linelength=width*3, i;
+
+
+	if (frame->curpix==0) {
+		if (frame->grabstate==FRAME_READY) {
+			frame->grabstate=FRAME_GRABBING;
+		}
+		frame->curline=framedata+linelength;
+		frame->curlinepix=0;
+	}
+
+	if (offset!=frame->curpix) {
+		/* Regard frame as lost :( */
+		frame->curpix=0;
+		se401->error++;
+		return;
+	}
+
+	/* Check if we have to much data */
+	if (frame->curpix+len > datasize) {
+		len=datasize-frame->curpix;
+	}
+	if (se401->cheight%4)
+		blineoffset=1;
+	bline=frame->curpix/se401->cwidth+blineoffset;
+
+	curline=frame->curline;
+	nextline=curline+linelength;
+	if (nextline >= framedata+datasize*3)
+		nextline=curline;
+	while (len) {
+		if (frame->curlinepix>=width) {
+			frame->curlinepix-=width;
+			bline=frame->curpix/width+blineoffset;
+			curline+=linelength*2;
+			nextline+=linelength*2;
+			if (curline >= framedata+datasize*3) {
+				frame->curlinepix++;
+				curline-=3;
+				nextline-=3;
+				len--;
+				data++;
+				frame->curpix++;
+			}
+			if (nextline >= framedata+datasize*3)
+				nextline=curline;
+		}
+		if ((bline&1)) {
+			if ((frame->curlinepix&1)) {
+				*(curline+2)=*data;
+				*(curline-1)=*data;
+				*(nextline+2)=*data;
+				*(nextline-1)=*data;
+			} else {
+				*(curline+1)=
+					(*(curline+1)+*data)/2;
+				*(curline-2)=
+					(*(curline-2)+*data)/2;
+				*(nextline+1)=*data;
+				*(nextline-2)=*data;
+			}
+		} else {
+			if ((frame->curlinepix&1)) {
+				*(curline+1)=
+					(*(curline+1)+*data)/2;
+				*(curline-2)=
+					(*(curline-2)+*data)/2;
+				*(nextline+1)=*data;
+				*(nextline-2)=*data;
+			} else {
+				*curline=*data;
+				*(curline-3)=*data;
+				*nextline=*data;
+				*(nextline-3)=*data;
+			}
+		}
+		frame->curlinepix++;
+		curline-=3;
+		nextline-=3;
+		len--;
+		data++;
+		frame->curpix++;
+	}
+	frame->curline=curline;
+
+	if (frame->curpix>=datasize) {
+		/* Fix the top line */
+		framedata+=linelength;
+		for (i=0; i<linelength; i++) {
+			framedata--;
+			*framedata=*(framedata+linelength);
+		}
+		/* Fix the left side (green is already present) */
+		for (i=0; i<se401->cheight; i++) {
+			*framedata=*(framedata+3);
+			*(framedata+1)=*(framedata+4);
+			*(framedata+2)=*(framedata+5);
+			framedata+=linelength;
+		}
+		frame->curpix=0;
+		frame->grabstate=FRAME_DONE;
+		se401->framecount++;
+		se401->readcount++;
+		if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) {
+			se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1);
+		}
+	}
+}
+
+static int se401_newframe(struct usb_se401 *se401, int framenr)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int errors=0;
+
+	while (se401->streaming &&
+	    (se401->frame[framenr].grabstate==FRAME_READY ||
+	     se401->frame[framenr].grabstate==FRAME_GRABBING) ) {
+		if(!se401->frame[framenr].curpix) {
+			errors++;
+		}
+		wait_interruptible(
+		    se401->scratch[se401->scratch_use].state!=BUFFER_READY,
+		    &se401->wq,
+		    &wait
+		);
+		if (se401->nullpackets > SE401_MAX_NULLPACKETS) {
+			se401->nullpackets=0;
+			info("to many null length packets, restarting capture");
+			se401_stop_stream(se401);
+			se401_start_stream(se401);
+		} else {
+			if (se401->scratch[se401->scratch_use].state!=BUFFER_READY) {
+				se401->frame[framenr].grabstate=FRAME_ERROR;
+				return -EIO;
+			}
+			se401->scratch[se401->scratch_use].state=BUFFER_BUSY;
+			if (se401->format==FMT_JANGGU) {
+				decode_JangGu(se401, &se401->scratch[se401->scratch_use]);
+			} else {
+				decode_bayer(se401, &se401->scratch[se401->scratch_use]);
+			}
+			se401->scratch[se401->scratch_use].state=BUFFER_UNUSED;
+			se401->scratch_use++;
+			if (se401->scratch_use>=SE401_NUMSCRATCH)
+				se401->scratch_use=0;
+			if (errors > SE401_MAX_ERRORS) {
+				errors=0;
+				info("to much errors, restarting capture");
+				se401_stop_stream(se401);
+				se401_start_stream(se401);
+			}
+		}
+	}
+
+	if (se401->frame[framenr].grabstate==FRAME_DONE)
+		if (se401->enhance)
+			enhance_picture(se401->frame[framenr].data, se401->cheight*se401->cwidth*3);
+	return 0;
+}
+
+static void usb_se401_remove_disconnected (struct usb_se401 *se401)
+{
+	int i;
+
+	se401->dev = NULL;
+
+	for (i=0; i<SE401_NUMSBUF; i++)
+		if (se401->urb[i]) {
+			usb_kill_urb(se401->urb[i]);
+			usb_free_urb(se401->urb[i]);
+			se401->urb[i] = NULL;
+			kfree(se401->sbuf[i].data);
+		}
+	for (i=0; i<SE401_NUMSCRATCH; i++) {
+		kfree(se401->scratch[i].data);
+	}
+	if (se401->inturb) {
+		usb_kill_urb(se401->inturb);
+		usb_free_urb(se401->inturb);
+	}
+	info("%s disconnected", se401->camera_name);
+
+	/* Free the memory */
+	kfree(se401->width);
+	kfree(se401->height);
+	kfree(se401);
+}
+
+
+
+/****************************************************************************
+ *
+ * Video4Linux
+ *
+ ***************************************************************************/
+
+
+static int se401_open(struct inode *inode, struct file *file)
+{
+	struct video_device *dev = video_devdata(file);
+	struct usb_se401 *se401 = (struct usb_se401 *)dev;
+	int err = 0;
+
+	if (se401->user)
+		return -EBUSY;
+	se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES);
+	if (se401->fbuf)
+		file->private_data = dev;
+	else
+		err = -ENOMEM;
+	se401->user = !err;
+
+	return err;
+}
+
+static int se401_close(struct inode *inode, struct file *file)
+{
+	struct video_device *dev = file->private_data;
+	struct usb_se401 *se401 = (struct usb_se401 *)dev;
+	int i;
+
+	rvfree(se401->fbuf, se401->maxframesize * SE401_NUMFRAMES);
+	if (se401->removed) {
+		usb_se401_remove_disconnected(se401);
+		info("device unregistered");
+	} else {
+		for (i=0; i<SE401_NUMFRAMES; i++)
+			se401->frame[i].grabstate=FRAME_UNUSED;
+		if (se401->streaming)
+			se401_stop_stream(se401);
+		se401->user=0;
+	}
+	file->private_data = NULL;
+	return 0;
+}
+
+static int se401_do_ioctl(struct inode *inode, struct file *file,
+			  unsigned int cmd, void *arg)
+{
+	struct video_device *vdev = file->private_data;
+	struct usb_se401 *se401 = (struct usb_se401 *)vdev;
+
+	if (!se401->dev)
+		return -EIO;
+
+	switch (cmd) {
+	case VIDIOCGCAP:
+	{
+		struct video_capability *b = arg;
+		strcpy(b->name, se401->camera_name);
+		b->type = VID_TYPE_CAPTURE;
+		b->channels = 1;
+		b->audios = 0;
+		b->maxwidth = se401->width[se401->sizes-1];
+		b->maxheight = se401->height[se401->sizes-1];
+		b->minwidth = se401->width[0];
+		b->minheight = se401->height[0];
+		return 0;
+	}
+	case VIDIOCGCHAN:
+	{
+		struct video_channel *v = arg;
+
+		if (v->channel != 0)
+			return -EINVAL;
+		v->flags = 0;
+		v->tuners = 0;
+		v->type = VIDEO_TYPE_CAMERA;
+		strcpy(v->name, "Camera");
+		return 0;
+	}
+	case VIDIOCSCHAN:
+	{
+		struct video_channel *v = arg;
+
+		if (v->channel != 0)
+			return -EINVAL;
+		return 0;
+	}
+	case VIDIOCGPICT:
+	{
+		struct video_picture *p = arg;
+
+		se401_get_pict(se401, p);
+		return 0;
+	}
+	case VIDIOCSPICT:
+	{
+		struct video_picture *p = arg;
+
+		if (se401_set_pict(se401, p))
+			return -EINVAL;
+		return 0;
+	}
+	case VIDIOCSWIN:
+	{
+		struct video_window *vw = arg;
+
+		if (vw->flags)
+			return -EINVAL;
+		if (vw->clipcount)
+			return -EINVAL;
+		if (se401_set_size(se401, vw->width, vw->height))
+			return -EINVAL;
+		return 0;
+	}
+	case VIDIOCGWIN:
+	{
+		struct video_window *vw = arg;
+
+		vw->x = 0;               /* FIXME */
+		vw->y = 0;
+		vw->chromakey = 0;
+		vw->flags = 0;
+		vw->clipcount = 0;
+		vw->width = se401->cwidth;
+		vw->height = se401->cheight;
+		return 0;
+	}
+	case VIDIOCGMBUF:
+	{
+		struct video_mbuf *vm = arg;
+		int i;
+
+		memset(vm, 0, sizeof(*vm));
+		vm->size = SE401_NUMFRAMES * se401->maxframesize;
+		vm->frames = SE401_NUMFRAMES;
+		for (i=0; i<SE401_NUMFRAMES; i++)
+			vm->offsets[i] = se401->maxframesize * i;
+		return 0;
+	}
+	case VIDIOCMCAPTURE:
+	{
+		struct video_mmap *vm = arg;
+
+		if (vm->format != VIDEO_PALETTE_RGB24)
+			return -EINVAL;
+		if (vm->frame >= SE401_NUMFRAMES)
+			return -EINVAL;
+		if (se401->frame[vm->frame].grabstate != FRAME_UNUSED)
+			return -EBUSY;
+
+		/* Is this according to the v4l spec??? */
+		if (se401_set_size(se401, vm->width, vm->height))
+			return -EINVAL;
+		se401->frame[vm->frame].grabstate=FRAME_READY;
+
+		if (!se401->streaming)
+			se401_start_stream(se401);
+
+		/* Set the picture properties */
+		if (se401->framecount==0)
+			se401_send_pict(se401);
+		/* Calibrate the reset level after a few frames. */
+		if (se401->framecount%20==1)
+			se401_auto_resetlevel(se401);
+
+		return 0;
+	}
+	case VIDIOCSYNC:
+	{
+		int *frame = arg;
+		int ret=0;
+
+		if(*frame <0 || *frame >= SE401_NUMFRAMES)
+			return -EINVAL;
+
+		ret=se401_newframe(se401, *frame);
+		se401->frame[*frame].grabstate=FRAME_UNUSED;
+		return ret;
+	}
+	case VIDIOCGFBUF:
+	{
+		struct video_buffer *vb = arg;
+
+		memset(vb, 0, sizeof(*vb));
+		return 0;
+	}
+	case VIDIOCKEY:
+		return 0;
+	case VIDIOCCAPTURE:
+		return -EINVAL;
+	case VIDIOCSFBUF:
+		return -EINVAL;
+	case VIDIOCGTUNER:
+	case VIDIOCSTUNER:
+		return -EINVAL;
+	case VIDIOCGFREQ:
+	case VIDIOCSFREQ:
+		return -EINVAL;
+	case VIDIOCGAUDIO:
+	case VIDIOCSAUDIO:
+		return -EINVAL;
+	default:
+		return -ENOIOCTLCMD;
+	} /* end switch */
+
+	return 0;
+}
+
+static int se401_ioctl(struct inode *inode, struct file *file,
+		       unsigned int cmd, unsigned long arg)
+{
+	return video_usercopy(inode, file, cmd, arg, se401_do_ioctl);
+}
+
+static ssize_t se401_read(struct file *file, char __user *buf,
+		     size_t count, loff_t *ppos)
+{
+	int realcount=count, ret=0;
+	struct video_device *dev = file->private_data;
+	struct usb_se401 *se401 = (struct usb_se401 *)dev;
+
+
+	if (se401->dev == NULL)
+		return -EIO;
+	if (realcount > se401->cwidth*se401->cheight*3)
+		realcount=se401->cwidth*se401->cheight*3;
+
+	/* Shouldn't happen: */
+	if (se401->frame[0].grabstate==FRAME_GRABBING)
+		return -EBUSY;
+	se401->frame[0].grabstate=FRAME_READY;
+	se401->frame[1].grabstate=FRAME_UNUSED;
+	se401->curframe=0;
+
+	if (!se401->streaming)
+		se401_start_stream(se401);
+
+	/* Set the picture properties */
+	if (se401->framecount==0)
+		se401_send_pict(se401);
+	/* Calibrate the reset level after a few frames. */
+	if (se401->framecount%20==1)
+		se401_auto_resetlevel(se401);
+
+	ret=se401_newframe(se401, 0);
+
+	se401->frame[0].grabstate=FRAME_UNUSED;
+	if (ret)
+		return ret;
+	if (copy_to_user(buf, se401->frame[0].data, realcount))
+		return -EFAULT;
+
+	return realcount;
+}
+
+static int se401_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *dev = file->private_data;
+	struct usb_se401 *se401 = (struct usb_se401 *)dev;
+	unsigned long start = vma->vm_start;
+	unsigned long size  = vma->vm_end-vma->vm_start;
+	unsigned long page, pos;
+
+	mutex_lock(&se401->lock);
+
+	if (se401->dev == NULL) {
+		mutex_unlock(&se401->lock);
+		return -EIO;
+	}
+	if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))) {
+		mutex_unlock(&se401->lock);
+		return -EINVAL;
+	}
+	pos = (unsigned long)se401->fbuf;
+	while (size > 0) {
+		page = vmalloc_to_pfn((void *)pos);
+		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
+			mutex_unlock(&se401->lock);
+			return -EAGAIN;
+		}
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		if (size > PAGE_SIZE)
+			size -= PAGE_SIZE;
+		else
+			size = 0;
+	}
+	mutex_unlock(&se401->lock);
+
+	return 0;
+}
+
+static struct file_operations se401_fops = {
+	.owner =	THIS_MODULE,
+	.open =         se401_open,
+	.release =      se401_close,
+	.read =         se401_read,
+	.mmap =         se401_mmap,
+	.ioctl =        se401_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.llseek =       no_llseek,
+};
+static struct video_device se401_template = {
+	.owner =	THIS_MODULE,
+	.name =         "se401 USB camera",
+	.type =         VID_TYPE_CAPTURE,
+	.hardware =     VID_HARDWARE_SE401,
+	.fops =         &se401_fops,
+};
+
+
+
+/***************************/
+static int se401_init(struct usb_se401 *se401, int button)
+{
+	int i=0, rc;
+	unsigned char cp[0x40];
+	char temp[200];
+
+	/* led on */
+	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
+
+	/* get camera descriptor */
+	rc=se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, cp, sizeof(cp));
+	if (cp[1]!=0x41) {
+		err("Wrong descriptor type");
+		return 1;
+	}
+	sprintf (temp, "ExtraFeatures: %d", cp[3]);
+
+	se401->sizes=cp[4]+cp[5]*256;
+	se401->width=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
+	if (!se401->width)
+		return 1;
+	se401->height=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
+	if (!se401->height) {
+		kfree(se401->width);
+		return 1;
+	}
+	for (i=0; i<se401->sizes; i++) {
+		    se401->width[i]=cp[6+i*4+0]+cp[6+i*4+1]*256;
+		    se401->height[i]=cp[6+i*4+2]+cp[6+i*4+3]*256;
+	}
+	sprintf (temp, "%s Sizes:", temp);
+	for (i=0; i<se401->sizes; i++) {
+		sprintf(temp, "%s %dx%d", temp, se401->width[i], se401->height[i]);
+	}
+	info("%s", temp);
+	se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3;
+
+	rc=se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp));
+	se401->cwidth=cp[0]+cp[1]*256;
+	rc=se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp));
+	se401->cheight=cp[0]+cp[1]*256;
+
+	if (!cp[2] && SE401_FORMAT_BAYER) {
+		err("Bayer format not supported!");
+		return 1;
+	}
+	/* set output mode (BAYER) */
+	se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, SE401_FORMAT_BAYER, NULL, 0);
+
+	rc=se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp));
+	se401->brightness=cp[0]+cp[1]*256;
+	/* some default values */
+	se401->resetlevel=0x2d;
+	se401->rgain=0x20;
+	se401->ggain=0x20;
+	se401->bgain=0x20;
+	se401_set_exposure(se401, 20000);
+	se401->palette=VIDEO_PALETTE_RGB24;
+	se401->enhance=1;
+	se401->dropped=0;
+	se401->error=0;
+	se401->framecount=0;
+	se401->readcount=0;
+
+	/* Start interrupt transfers for snapshot button */
+	if (button) {
+		se401->inturb=usb_alloc_urb(0, GFP_KERNEL);
+		if (!se401->inturb) {
+			info("Allocation of inturb failed");
+			return 1;
+		}
+		usb_fill_int_urb(se401->inturb, se401->dev,
+		    usb_rcvintpipe(se401->dev, SE401_BUTTON_ENDPOINT),
+		    &se401->button, sizeof(se401->button),
+		    se401_button_irq,
+		    se401,
+		    8
+		);
+		if (usb_submit_urb(se401->inturb, GFP_KERNEL)) {
+			info("int urb burned down");
+			return 1;
+		}
+	} else
+		se401->inturb=NULL;
+
+	/* Flash the led */
+	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
+	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
+	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0);
+	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0);
+
+	return 0;
+}
+
+static int se401_probe(struct usb_interface *intf,
+	const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_interface_descriptor *interface;
+	struct usb_se401 *se401;
+	char *camera_name=NULL;
+	int button=1;
+
+	/* We don't handle multi-config cameras */
+	if (dev->descriptor.bNumConfigurations != 1)
+		return -ENODEV;
+
+	interface = &intf->cur_altsetting->desc;
+
+	/* Is it an se401? */
+	if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 &&
+	    le16_to_cpu(dev->descriptor.idProduct) == 0x0004) {
+		camera_name="Endpoints/Aox SE401";
+	} else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 &&
+	    le16_to_cpu(dev->descriptor.idProduct) == 0x030b) {
+		camera_name="Philips PCVC665K";
+	} else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
+	    le16_to_cpu(dev->descriptor.idProduct) == 0x5001) {
+		camera_name="Kensington VideoCAM 67014";
+	} else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
+	    le16_to_cpu(dev->descriptor.idProduct) == 0x5002) {
+		camera_name="Kensington VideoCAM 6701(5/7)";
+	} else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
+	    le16_to_cpu(dev->descriptor.idProduct) == 0x5003) {
+		camera_name="Kensington VideoCAM 67016";
+		button=0;
+	} else
+		return -ENODEV;
+
+	/* Checking vendor/product should be enough, but what the hell */
+	if (interface->bInterfaceClass != 0x00)
+		return -ENODEV;
+	if (interface->bInterfaceSubClass != 0x00)
+		return -ENODEV;
+
+	/* We found one */
+	info("SE401 camera found: %s", camera_name);
+
+	if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) {
+		err("couldn't kmalloc se401 struct");
+		return -ENOMEM;
+	}
+
+	se401->dev = dev;
+	se401->iface = interface->bInterfaceNumber;
+	se401->camera_name = camera_name;
+
+	info("firmware version: %02x", le16_to_cpu(dev->descriptor.bcdDevice) & 255);
+
+	if (se401_init(se401, button)) {
+		kfree(se401);
+		return -EIO;
+	}
+
+	memcpy(&se401->vdev, &se401_template, sizeof(se401_template));
+	memcpy(se401->vdev.name, se401->camera_name, strlen(se401->camera_name));
+	init_waitqueue_head(&se401->wq);
+	mutex_init(&se401->lock);
+	wmb();
+
+	if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+		kfree(se401);
+		err("video_register_device failed");
+		return -EIO;
+	}
+	info("registered new video device: video%d", se401->vdev.minor);
+
+	usb_set_intfdata (intf, se401);
+	return 0;
+}
+
+static void se401_disconnect(struct usb_interface *intf)
+{
+	struct usb_se401 *se401 = usb_get_intfdata (intf);
+
+	usb_set_intfdata (intf, NULL);
+	if (se401) {
+		video_unregister_device(&se401->vdev);
+		if (!se401->user){
+			usb_se401_remove_disconnected(se401);
+		} else {
+			se401->frame[0].grabstate = FRAME_ERROR;
+			se401->frame[0].grabstate = FRAME_ERROR;
+
+			se401->streaming = 0;
+
+			wake_up_interruptible(&se401->wq);
+			se401->removed = 1;
+		}
+	}
+}
+
+static struct usb_driver se401_driver = {
+	.name		= "se401",
+	.id_table	= device_table,
+	.probe		= se401_probe,
+	.disconnect	= se401_disconnect,
+};
+
+
+
+/****************************************************************************
+ *
+ *  Module routines
+ *
+ ***************************************************************************/
+
+static int __init usb_se401_init(void)
+{
+	info("SE401 usb camera driver version %s registering", version);
+	if (flickerless)
+		if (flickerless!=50 && flickerless!=60) {
+			info("Invallid flickerless value, use 0, 50 or 60.");
+			return -1;
+	}
+	return usb_register(&se401_driver);
+}
+
+static void __exit usb_se401_exit(void)
+{
+	usb_deregister(&se401_driver);
+	info("SE401 driver deregistered");
+}
+
+module_init(usb_se401_init);
+module_exit(usb_se401_exit);
diff --git a/drivers/media/video/se401.h b/drivers/media/video/se401.h
new file mode 100644
index 000000000000..a7a216bd4413
--- /dev/null
+++ b/drivers/media/video/se401.h
@@ -0,0 +1,234 @@
+
+#ifndef __LINUX_se401_H
+#define __LINUX_se401_H
+
+#include <asm/uaccess.h>
+#include <linux/videodev.h>
+#include <linux/smp_lock.h>
+#include <linux/mutex.h>
+
+#define se401_DEBUG	/* Turn on debug messages */
+
+#ifdef se401_DEBUG
+#  define PDEBUG(level, fmt, args...) \
+if (debug >= level) info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args)
+#else
+#  define PDEBUG(level, fmt, args...) do {} while(0)
+#endif
+
+/* An almost drop-in replacement for sleep_on_interruptible */
+#define wait_interruptible(test, queue, wait) \
+{ \
+	add_wait_queue(queue, wait); \
+	set_current_state(TASK_INTERRUPTIBLE); \
+	if (test) \
+		schedule(); \
+	remove_wait_queue(queue, wait); \
+	set_current_state(TASK_RUNNING); \
+	if (signal_pending(current)) \
+		break; \
+}
+
+#define SE401_REQ_GET_CAMERA_DESCRIPTOR		0x06
+#define SE401_REQ_START_CONTINUOUS_CAPTURE	0x41
+#define SE401_REQ_STOP_CONTINUOUS_CAPTURE	0x42
+#define SE401_REQ_CAPTURE_FRAME			0x43
+#define SE401_REQ_GET_BRT			0x44
+#define SE401_REQ_SET_BRT			0x45
+#define SE401_REQ_GET_WIDTH			0x4c
+#define SE401_REQ_SET_WIDTH			0x4d
+#define SE401_REQ_GET_HEIGHT			0x4e
+#define SE401_REQ_SET_HEIGHT			0x4f
+#define SE401_REQ_GET_OUTPUT_MODE		0x50
+#define SE401_REQ_SET_OUTPUT_MODE		0x51
+#define SE401_REQ_GET_EXT_FEATURE		0x52
+#define SE401_REQ_SET_EXT_FEATURE		0x53
+#define SE401_REQ_CAMERA_POWER			0x56
+#define SE401_REQ_LED_CONTROL			0x57
+#define SE401_REQ_BIOS				0xff
+
+#define SE401_BIOS_READ				0x07
+
+#define SE401_FORMAT_BAYER	0x40
+
+/* Hyundai hv7131b registers
+   7121 and 7141 should be the same (haven't really checked...) */
+/* Mode registers: */
+#define HV7131_REG_MODE_A		0x00
+#define HV7131_REG_MODE_B		0x01
+#define HV7131_REG_MODE_C		0x02
+/* Frame registers: */
+#define HV7131_REG_FRSU		0x10
+#define HV7131_REG_FRSL		0x11
+#define HV7131_REG_FCSU		0x12
+#define HV7131_REG_FCSL		0x13
+#define HV7131_REG_FWHU		0x14
+#define HV7131_REG_FWHL		0x15
+#define HV7131_REG_FWWU		0x16
+#define HV7131_REG_FWWL		0x17
+/* Timing registers: */
+#define HV7131_REG_THBU		0x20
+#define HV7131_REG_THBL		0x21
+#define HV7131_REG_TVBU		0x22
+#define HV7131_REG_TVBL		0x23
+#define HV7131_REG_TITU		0x25
+#define HV7131_REG_TITM		0x26
+#define HV7131_REG_TITL		0x27
+#define HV7131_REG_TMCD		0x28
+/* Adjust Registers: */
+#define HV7131_REG_ARLV		0x30
+#define HV7131_REG_ARCG		0x31
+#define HV7131_REG_AGCG		0x32
+#define HV7131_REG_ABCG		0x33
+#define HV7131_REG_APBV		0x34
+#define HV7131_REG_ASLP		0x54
+/* Offset Registers: */
+#define HV7131_REG_OFSR		0x50
+#define HV7131_REG_OFSG		0x51
+#define HV7131_REG_OFSB		0x52
+/* REset level statistics registers: */
+#define HV7131_REG_LOREFNOH	0x57
+#define HV7131_REG_LOREFNOL	0x58
+#define HV7131_REG_HIREFNOH	0x59
+#define HV7131_REG_HIREFNOL	0x5a
+
+/* se401 registers */
+#define SE401_OPERATINGMODE	0x2000
+
+
+/* size of usb transfers */
+#define SE401_PACKETSIZE	4096
+/* number of queued bulk transfers to use, should be about 8 */
+#define SE401_NUMSBUF		1
+/* read the usb specs for this one :) */
+#define SE401_VIDEO_ENDPOINT	1
+#define SE401_BUTTON_ENDPOINT	2
+/* number of frames supported by the v4l part */
+#define SE401_NUMFRAMES		2
+/* scratch buffers for passing data to the decoders */
+#define SE401_NUMSCRATCH	32
+/* maximum amount of data in a JangGu packet */
+#define SE401_VLCDATALEN	1024
+/* number of nul sized packets to receive before kicking the camera */
+#define SE401_MAX_NULLPACKETS	4000
+/* number of decoding errors before kicking the camera */
+#define SE401_MAX_ERRORS	200
+
+struct usb_device;
+
+struct se401_sbuf {
+	unsigned char *data;
+};
+
+enum {
+	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
+	FRAME_READY,		/* Ready to start grabbing */
+	FRAME_GRABBING,		/* In the process of being grabbed into */
+	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
+	FRAME_ERROR,		/* Something bad happened while processing */
+};
+
+enum {
+	FMT_BAYER,
+	FMT_JANGGU,
+};
+
+enum {
+	BUFFER_UNUSED,
+	BUFFER_READY,
+	BUFFER_BUSY,
+	BUFFER_DONE,
+};
+
+struct se401_scratch {
+	unsigned char *data;
+	volatile int state;
+	int offset;
+	int length;
+};
+
+struct se401_frame {
+	unsigned char *data;		/* Frame buffer */
+
+	volatile int grabstate;	/* State of grabbing */
+
+	unsigned char *curline;
+	int curlinepix;
+	int curpix;
+};
+
+struct usb_se401 {
+	struct video_device vdev;
+
+	/* Device structure */
+	struct usb_device *dev;
+
+	unsigned char iface;
+
+	char *camera_name;
+
+	int change;
+	int brightness;
+	int hue;
+	int rgain;
+	int ggain;
+	int bgain;
+	int expose_h;
+	int expose_m;
+	int expose_l;
+	int resetlevel;
+
+	int enhance;
+
+	int format;
+	int sizes;
+	int *width;
+	int *height;
+	int cwidth;		/* current width */
+	int cheight;		/* current height */
+	int palette;
+	int maxframesize;
+	int cframesize;		/* current framesize */
+
+	struct mutex lock;
+	int user;		/* user count for exclusive use */
+	int removed;		/* device disconnected */
+
+	int streaming;		/* Are we streaming video? */
+
+	char *fbuf;		/* Videodev buffer area */
+
+	struct urb *urb[SE401_NUMSBUF];
+	struct urb *inturb;
+
+	int button;
+	int buttonpressed;
+
+	int curframe;		/* Current receiving frame */
+	struct se401_frame frame[SE401_NUMFRAMES];
+	int readcount;
+	int framecount;
+	int error;
+	int dropped;
+
+	int scratch_next;
+	int scratch_use;
+	int scratch_overflow;
+	struct se401_scratch scratch[SE401_NUMSCRATCH];
+
+	/* Decoder specific data: */
+	unsigned char vlcdata[SE401_VLCDATALEN];
+	int vlcdatapos;
+	int bayeroffset;
+
+	struct se401_sbuf sbuf[SE401_NUMSBUF];
+
+	wait_queue_head_t wq;	/* Processes waiting */
+
+	int nullpackets;
+};
+
+
+
+#endif
+
diff --git a/drivers/media/video/sn9c102/Makefile b/drivers/media/video/sn9c102/Makefile
new file mode 100644
index 000000000000..536ad3098da4
--- /dev/null
+++ b/drivers/media/video/sn9c102/Makefile
@@ -0,0 +1,7 @@
+sn9c102-objs    := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o \
+		   sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bca.o \
+		   sn9c102_pas202bcb.o sn9c102_tas5110c1b.o \
+		   sn9c102_tas5130d1b.o
+
+obj-$(CONFIG_USB_SN9C102)       += sn9c102.o
+
diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h
new file mode 100644
index 000000000000..2c6ff396dafc
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102.h
@@ -0,0 +1,218 @@
+/***************************************************************************
+ * V4L2 driver for SN9C10x PC Camera Controllers                           *
+ *                                                                         *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _SN9C102_H_
+#define _SN9C102_H_
+
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <linux/param.h>
+#include <linux/rwsem.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/stddef.h>
+
+#include "sn9c102_sensor.h"
+
+/*****************************************************************************/
+
+#define SN9C102_DEBUG
+#define SN9C102_DEBUG_LEVEL       2
+#define SN9C102_MAX_DEVICES       64
+#define SN9C102_PRESERVE_IMGSCALE 0
+#define SN9C102_FORCE_MUNMAP      0
+#define SN9C102_MAX_FRAMES        32
+#define SN9C102_URBS              2
+#define SN9C102_ISO_PACKETS       7
+#define SN9C102_ALTERNATE_SETTING 8
+#define SN9C102_URB_TIMEOUT       msecs_to_jiffies(2 * SN9C102_ISO_PACKETS)
+#define SN9C102_CTRL_TIMEOUT      300
+#define SN9C102_FRAME_TIMEOUT     2
+
+/*****************************************************************************/
+
+enum sn9c102_bridge {
+	BRIDGE_SN9C101 = 0x01,
+	BRIDGE_SN9C102 = 0x02,
+	BRIDGE_SN9C103 = 0x04,
+};
+
+SN9C102_ID_TABLE
+SN9C102_SENSOR_TABLE
+
+enum sn9c102_frame_state {
+	F_UNUSED,
+	F_QUEUED,
+	F_GRABBING,
+	F_DONE,
+	F_ERROR,
+};
+
+struct sn9c102_frame_t {
+	void* bufmem;
+	struct v4l2_buffer buf;
+	enum sn9c102_frame_state state;
+	struct list_head frame;
+	unsigned long vma_use_count;
+};
+
+enum sn9c102_dev_state {
+	DEV_INITIALIZED = 0x01,
+	DEV_DISCONNECTED = 0x02,
+	DEV_MISCONFIGURED = 0x04,
+};
+
+enum sn9c102_io_method {
+	IO_NONE,
+	IO_READ,
+	IO_MMAP,
+};
+
+enum sn9c102_stream_state {
+	STREAM_OFF,
+	STREAM_INTERRUPT,
+	STREAM_ON,
+};
+
+typedef char sn9c103_sof_header_t[18];
+typedef char sn9c102_sof_header_t[12];
+typedef char sn9c102_eof_header_t[4];
+
+struct sn9c102_sysfs_attr {
+	u8 reg, i2c_reg;
+	sn9c103_sof_header_t frame_header;
+};
+
+struct sn9c102_module_param {
+	u8 force_munmap;
+	u16 frame_timeout;
+};
+
+static DEFINE_MUTEX(sn9c102_sysfs_lock);
+static DECLARE_RWSEM(sn9c102_disconnect);
+
+struct sn9c102_device {
+	struct video_device* v4ldev;
+
+	enum sn9c102_bridge bridge;
+	struct sn9c102_sensor sensor;
+
+	struct usb_device* usbdev;
+	struct urb* urb[SN9C102_URBS];
+	void* transfer_buffer[SN9C102_URBS];
+	u8* control_buffer;
+
+	struct sn9c102_frame_t *frame_current, frame[SN9C102_MAX_FRAMES];
+	struct list_head inqueue, outqueue;
+	u32 frame_count, nbuffers, nreadbuffers;
+
+	enum sn9c102_io_method io;
+	enum sn9c102_stream_state stream;
+
+	struct v4l2_jpegcompression compression;
+
+	struct sn9c102_sysfs_attr sysfs;
+	sn9c103_sof_header_t sof_header;
+	u16 reg[63];
+
+	struct sn9c102_module_param module_param;
+
+	enum sn9c102_dev_state state;
+	u8 users;
+
+	struct mutex dev_mutex, fileop_mutex;
+	spinlock_t queue_lock;
+	wait_queue_head_t open, wait_frame, wait_stream;
+};
+
+/*****************************************************************************/
+
+struct sn9c102_device*
+sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id)
+{
+	if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id))
+		return cam;
+
+	return NULL;
+}
+
+
+void
+sn9c102_attach_sensor(struct sn9c102_device* cam,
+		      struct sn9c102_sensor* sensor)
+{
+	memcpy(&cam->sensor, sensor, sizeof(struct sn9c102_sensor));
+}
+
+/*****************************************************************************/
+
+#undef DBG
+#undef KDBG
+#ifdef SN9C102_DEBUG
+#	define DBG(level, fmt, args...)                                       \
+do {                                                                          \
+	if (debug >= (level)) {                                               \
+		if ((level) == 1)                                             \
+			dev_err(&cam->usbdev->dev, fmt "\n", ## args);        \
+		else if ((level) == 2)                                        \
+			dev_info(&cam->usbdev->dev, fmt "\n", ## args);       \
+		else if ((level) >= 3)                                        \
+			dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",      \
+				 __FUNCTION__, __LINE__ , ## args);           \
+	}                                                                     \
+} while (0)
+#	define V4LDBG(level, name, cmd)                                       \
+do {                                                                          \
+	if (debug >= (level))                                                 \
+		v4l_print_ioctl(name, cmd);                                   \
+} while (0)
+#	define KDBG(level, fmt, args...)                                      \
+do {                                                                          \
+	if (debug >= (level)) {                                               \
+		if ((level) == 1 || (level) == 2)                             \
+			pr_info("sn9c102: " fmt "\n", ## args);               \
+		else if ((level) == 3)                                        \
+			pr_debug("sn9c102: [%s:%d] " fmt "\n", __FUNCTION__,  \
+				 __LINE__ , ## args);                         \
+	}                                                                     \
+} while (0)
+#else
+#	define DBG(level, fmt, args...) do {;} while(0)
+#	define V4LDBG(level, name, cmd) do {;} while(0)
+#	define KDBG(level, fmt, args...) do {;} while(0)
+#endif
+
+#undef PDBG
+#define PDBG(fmt, args...)                                                    \
+dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",                              \
+	 __FUNCTION__, __LINE__ , ## args)
+
+#undef PDBGG
+#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
+
+#endif /* _SN9C102_H_ */
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
new file mode 100644
index 000000000000..ea4394dc9415
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -0,0 +1,2919 @@
+/***************************************************************************
+ * V4L2 driver for SN9C10x PC Camera Controllers                           *
+ *                                                                         *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/poll.h>
+#include <linux/stat.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/page-flags.h>
+#include <linux/byteorder/generic.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+
+#include "sn9c102.h"
+
+/*****************************************************************************/
+
+#define SN9C102_MODULE_NAME     "V4L2 driver for SN9C10x PC Camera Controllers"
+#define SN9C102_MODULE_AUTHOR   "(C) 2004-2006 Luca Risolia"
+#define SN9C102_AUTHOR_EMAIL    "<luca.risolia@studio.unibo.it>"
+#define SN9C102_MODULE_LICENSE  "GPL"
+#define SN9C102_MODULE_VERSION  "1:1.27"
+#define SN9C102_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 27)
+
+/*****************************************************************************/
+
+MODULE_DEVICE_TABLE(usb, sn9c102_id_table);
+
+MODULE_AUTHOR(SN9C102_MODULE_AUTHOR " " SN9C102_AUTHOR_EMAIL);
+MODULE_DESCRIPTION(SN9C102_MODULE_NAME);
+MODULE_VERSION(SN9C102_MODULE_VERSION);
+MODULE_LICENSE(SN9C102_MODULE_LICENSE);
+
+static short video_nr[] = {[0 ... SN9C102_MAX_DEVICES-1] = -1};
+module_param_array(video_nr, short, NULL, 0444);
+MODULE_PARM_DESC(video_nr,
+		 "\n<-1|n[,...]> Specify V4L2 minor mode number."
+		 "\n -1 = use next available (default)"
+		 "\n  n = use minor number n (integer >= 0)"
+		 "\nYou can specify up to "__MODULE_STRING(SN9C102_MAX_DEVICES)
+		 " cameras this way."
+		 "\nFor example:"
+		 "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+		 "\nthe second camera and use auto for the first"
+		 "\none and for every other camera."
+		 "\n");
+
+static short force_munmap[] = {[0 ... SN9C102_MAX_DEVICES-1] =
+			       SN9C102_FORCE_MUNMAP};
+module_param_array(force_munmap, bool, NULL, 0444);
+MODULE_PARM_DESC(force_munmap,
+		 "\n<0|1[,...]> Force the application to unmap previously"
+		 "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+		 "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+		 "\nthis feature. This parameter is specific for each"
+		 "\ndetected camera."
+		 "\n 0 = do not force memory unmapping"
+		 "\n 1 = force memory unmapping (save memory)"
+		 "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+		 "\n");
+
+static unsigned int frame_timeout[] = {[0 ... SN9C102_MAX_DEVICES-1] =
+				       SN9C102_FRAME_TIMEOUT};
+module_param_array(frame_timeout, uint, NULL, 0644);
+MODULE_PARM_DESC(frame_timeout,
+		 "\n<n[,...]> Timeout for a video frame in seconds."
+		 "\nThis parameter is specific for each detected camera."
+		 "\nDefault value is "__MODULE_STRING(SN9C102_FRAME_TIMEOUT)"."
+		 "\n");
+
+#ifdef SN9C102_DEBUG
+static unsigned short debug = SN9C102_DEBUG_LEVEL;
+module_param(debug, ushort, 0644);
+MODULE_PARM_DESC(debug,
+		 "\n<n> Debugging information level, from 0 to 3:"
+		 "\n0 = none (use carefully)"
+		 "\n1 = critical errors"
+		 "\n2 = significant informations"
+		 "\n3 = more verbose messages"
+		 "\nLevel 3 is useful for testing only, when only "
+		 "one device is used."
+		 "\nDefault value is "__MODULE_STRING(SN9C102_DEBUG_LEVEL)"."
+		 "\n");
+#endif
+
+/*****************************************************************************/
+
+static sn9c102_sof_header_t sn9c102_sof_header[] = {
+	{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x00},
+	{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x01},
+};
+
+static sn9c103_sof_header_t sn9c103_sof_header[] = {
+	{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x20},
+};
+
+static sn9c102_eof_header_t sn9c102_eof_header[] = {
+	{0x00, 0x00, 0x00, 0x00},
+	{0x40, 0x00, 0x00, 0x00},
+	{0x80, 0x00, 0x00, 0x00},
+	{0xc0, 0x00, 0x00, 0x00},
+};
+
+/*****************************************************************************/
+
+static u32
+sn9c102_request_buffers(struct sn9c102_device* cam, u32 count,
+			enum sn9c102_io_method io)
+{
+	struct v4l2_pix_format* p = &(cam->sensor.pix_format);
+	struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
+	const size_t imagesize = cam->module_param.force_munmap ||
+				 io == IO_READ ?
+				 (p->width * p->height * p->priv) / 8 :
+				 (r->width * r->height * p->priv) / 8;
+	void* buff = NULL;
+	u32 i;
+
+	if (count > SN9C102_MAX_FRAMES)
+		count = SN9C102_MAX_FRAMES;
+
+	cam->nbuffers = count;
+	while (cam->nbuffers > 0) {
+		if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
+			break;
+		cam->nbuffers--;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize);
+		cam->frame[i].buf.index = i;
+		cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize);
+		cam->frame[i].buf.length = imagesize;
+		cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		cam->frame[i].buf.sequence = 0;
+		cam->frame[i].buf.field = V4L2_FIELD_NONE;
+		cam->frame[i].buf.memory = V4L2_MEMORY_MMAP;
+		cam->frame[i].buf.flags = 0;
+	}
+
+	return cam->nbuffers;
+}
+
+
+static void sn9c102_release_buffers(struct sn9c102_device* cam)
+{
+	if (cam->nbuffers) {
+		vfree(cam->frame[0].bufmem);
+		cam->nbuffers = 0;
+	}
+	cam->frame_current = NULL;
+}
+
+
+static void sn9c102_empty_framequeues(struct sn9c102_device* cam)
+{
+	u32 i;
+
+	INIT_LIST_HEAD(&cam->inqueue);
+	INIT_LIST_HEAD(&cam->outqueue);
+
+	for (i = 0; i < SN9C102_MAX_FRAMES; i++) {
+		cam->frame[i].state = F_UNUSED;
+		cam->frame[i].buf.bytesused = 0;
+	}
+}
+
+
+static void sn9c102_requeue_outqueue(struct sn9c102_device* cam)
+{
+	struct sn9c102_frame_t *i;
+
+	list_for_each_entry(i, &cam->outqueue, frame) {
+		i->state = F_QUEUED;
+		list_add(&i->frame, &cam->inqueue);
+	}
+
+	INIT_LIST_HEAD(&cam->outqueue);
+}
+
+
+static void sn9c102_queue_unusedframes(struct sn9c102_device* cam)
+{
+	unsigned long lock_flags;
+	u32 i;
+
+	for (i = 0; i < cam->nbuffers; i++)
+		if (cam->frame[i].state == F_UNUSED) {
+			cam->frame[i].state = F_QUEUED;
+			spin_lock_irqsave(&cam->queue_lock, lock_flags);
+			list_add_tail(&cam->frame[i].frame, &cam->inqueue);
+			spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+		}
+}
+
+/*****************************************************************************/
+
+int sn9c102_write_regs(struct sn9c102_device* cam, u8* buff, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	int i, res;
+
+	if (index + sizeof(buff) >= ARRAY_SIZE(cam->reg))
+		return -1;
+
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
+			      index, 0, buff, sizeof(buff),
+			      SN9C102_CTRL_TIMEOUT*sizeof(buff));
+	if (res < 0) {
+		DBG(3, "Failed to write registers (index 0x%02X, error %d)",
+		    index, res);
+		return -1;
+	}
+
+	for (i = 0; i < sizeof(buff); i++)
+		cam->reg[index+i] = buff[i];
+
+	return 0;
+}
+
+
+int sn9c102_write_reg(struct sn9c102_device* cam, u8 value, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* buff = cam->control_buffer;
+	int res;
+
+	if (index >= ARRAY_SIZE(cam->reg))
+		return -1;
+
+	*buff = value;
+
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
+			      index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
+	if (res < 0) {
+		DBG(3, "Failed to write a register (value 0x%02X, index "
+		       "0x%02X, error %d)", value, index, res);
+		return -1;
+	}
+
+	cam->reg[index] = value;
+
+	return 0;
+}
+
+
+/* NOTE: reading some registers always returns 0 */
+static int sn9c102_read_reg(struct sn9c102_device* cam, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* buff = cam->control_buffer;
+	int res;
+
+	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+			      index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
+	if (res < 0)
+		DBG(3, "Failed to read a register (index 0x%02X, error %d)",
+		    index, res);
+
+	return (res >= 0) ? (int)(*buff) : -1;
+}
+
+
+int sn9c102_pread_reg(struct sn9c102_device* cam, u16 index)
+{
+	if (index >= ARRAY_SIZE(cam->reg))
+		return -1;
+
+	return cam->reg[index];
+}
+
+
+static int
+sn9c102_i2c_wait(struct sn9c102_device* cam, struct sn9c102_sensor* sensor)
+{
+	int i, r;
+
+	for (i = 1; i <= 5; i++) {
+		r = sn9c102_read_reg(cam, 0x08);
+		if (r < 0)
+			return -EIO;
+		if (r & 0x04)
+			return 0;
+		if (sensor->frequency & SN9C102_I2C_400KHZ)
+			udelay(5*16);
+		else
+			udelay(16*16);
+	}
+	return -EBUSY;
+}
+
+
+static int
+sn9c102_i2c_detect_read_error(struct sn9c102_device* cam,
+			      struct sn9c102_sensor* sensor)
+{
+	int r;
+	r = sn9c102_read_reg(cam, 0x08);
+	return (r < 0 || (r >= 0 && !(r & 0x08))) ? -EIO : 0;
+}
+
+
+static int
+sn9c102_i2c_detect_write_error(struct sn9c102_device* cam,
+			       struct sn9c102_sensor* sensor)
+{
+	int r;
+	r = sn9c102_read_reg(cam, 0x08);
+	return (r < 0 || (r >= 0 && (r & 0x08))) ? -EIO : 0;
+}
+
+
+int
+sn9c102_i2c_try_raw_read(struct sn9c102_device* cam,
+			 struct sn9c102_sensor* sensor, u8 data0, u8 data1,
+			 u8 n, u8 buffer[])
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* data = cam->control_buffer;
+	int err = 0, res;
+
+	/* Write cycle */
+	data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) |
+		  ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) | 0x10;
+	data[1] = data0; /* I2C slave id */
+	data[2] = data1; /* address */
+	data[7] = 0x10;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
+			      0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += sn9c102_i2c_wait(cam, sensor);
+
+	/* Read cycle - n bytes */
+	data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) |
+		  ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) |
+		  (n << 4) | 0x02;
+	data[1] = data0;
+	data[7] = 0x10;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
+			      0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += sn9c102_i2c_wait(cam, sensor);
+
+	/* The first read byte will be placed in data[4] */
+	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+			      0x0a, 0, data, 5, SN9C102_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += sn9c102_i2c_detect_read_error(cam, sensor);
+
+	PDBGG("I2C read: address 0x%02X, first read byte: 0x%02X", data1,
+	      data[4]);
+
+	if (err) {
+		DBG(3, "I2C read failed for %s image sensor", sensor->name);
+		return -1;
+	}
+
+	if (buffer)
+		memcpy(buffer, data, sizeof(buffer));
+
+	return (int)data[4];
+}
+
+
+int
+sn9c102_i2c_try_raw_write(struct sn9c102_device* cam,
+			  struct sn9c102_sensor* sensor, u8 n, u8 data0,
+			  u8 data1, u8 data2, u8 data3, u8 data4, u8 data5)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* data = cam->control_buffer;
+	int err = 0, res;
+
+	/* Write cycle. It usually is address + value */
+	data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) |
+		  ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0)
+		  | ((n - 1) << 4);
+	data[1] = data0;
+	data[2] = data1;
+	data[3] = data2;
+	data[4] = data3;
+	data[5] = data4;
+	data[6] = data5;
+	data[7] = 0x14;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
+			      0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += sn9c102_i2c_wait(cam, sensor);
+	err += sn9c102_i2c_detect_write_error(cam, sensor);
+
+	if (err)
+		DBG(3, "I2C write failed for %s image sensor", sensor->name);
+
+	PDBGG("I2C raw write: %u bytes, data0 = 0x%02X, data1 = 0x%02X, "
+	      "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X",
+	      n, data0, data1, data2, data3, data4, data5);
+
+	return err ? -1 : 0;
+}
+
+
+int
+sn9c102_i2c_try_read(struct sn9c102_device* cam,
+		     struct sn9c102_sensor* sensor, u8 address)
+{
+	return sn9c102_i2c_try_raw_read(cam, sensor, sensor->i2c_slave_id,
+					address, 1, NULL);
+}
+
+
+int
+sn9c102_i2c_try_write(struct sn9c102_device* cam,
+		      struct sn9c102_sensor* sensor, u8 address, u8 value)
+{
+	return sn9c102_i2c_try_raw_write(cam, sensor, 3,
+					 sensor->i2c_slave_id, address,
+					 value, 0, 0, 0);
+}
+
+
+int sn9c102_i2c_read(struct sn9c102_device* cam, u8 address)
+{
+	return sn9c102_i2c_try_read(cam, &cam->sensor, address);
+}
+
+
+int sn9c102_i2c_write(struct sn9c102_device* cam, u8 address, u8 value)
+{
+	return sn9c102_i2c_try_write(cam, &cam->sensor, address, value);
+}
+
+/*****************************************************************************/
+
+static void*
+sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len)
+{
+	size_t soflen = 0, i;
+	u8 j, n = 0;
+
+	switch (cam->bridge) {
+	case BRIDGE_SN9C101:
+	case BRIDGE_SN9C102:
+		soflen = sizeof(sn9c102_sof_header_t);
+		n = sizeof(sn9c102_sof_header) / soflen;
+		break;
+	case BRIDGE_SN9C103:
+		soflen = sizeof(sn9c103_sof_header_t);
+		n = sizeof(sn9c103_sof_header) / soflen;
+	}
+
+	for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
+		for (j = 0; j < n; j++)
+			/* The invariable part of the header is 6 bytes long */
+			if ((cam->bridge != BRIDGE_SN9C103 &&
+			    !memcmp(mem + i, sn9c102_sof_header[j], 6)) ||
+			    (cam->bridge == BRIDGE_SN9C103 &&
+			    !memcmp(mem + i, sn9c103_sof_header[j], 6))) {
+				memcpy(cam->sof_header, mem + i, soflen);
+				/* Skip the header */
+				return mem + i + soflen;
+			}
+
+	return NULL;
+}
+
+
+static void*
+sn9c102_find_eof_header(struct sn9c102_device* cam, void* mem, size_t len)
+{
+	size_t eoflen = sizeof(sn9c102_eof_header_t), i;
+	unsigned j, n = sizeof(sn9c102_eof_header) / eoflen;
+
+	if (cam->sensor.pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X)
+		return NULL; /* EOF header does not exist in compressed data */
+
+	for (i = 0; (len >= eoflen) && (i <= len - eoflen); i++)
+		for (j = 0; j < n; j++)
+			if (!memcmp(mem + i, sn9c102_eof_header[j], eoflen))
+				return mem + i;
+
+	return NULL;
+}
+
+
+static void sn9c102_urb_complete(struct urb *urb, struct pt_regs* regs)
+{
+	struct sn9c102_device* cam = urb->context;
+	struct sn9c102_frame_t** f;
+	size_t imagesize, soflen;
+	u8 i;
+	int err = 0;
+
+	if (urb->status == -ENOENT)
+		return;
+
+	f = &cam->frame_current;
+
+	if (cam->stream == STREAM_INTERRUPT) {
+		cam->stream = STREAM_OFF;
+		if ((*f))
+			(*f)->state = F_QUEUED;
+		DBG(3, "Stream interrupted");
+		wake_up(&cam->wait_stream);
+	}
+
+	if (cam->state & DEV_DISCONNECTED)
+		return;
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		wake_up_interruptible(&cam->wait_frame);
+		return;
+	}
+
+	if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue))
+		goto resubmit_urb;
+
+	if (!(*f))
+		(*f) = list_entry(cam->inqueue.next, struct sn9c102_frame_t,
+				  frame);
+
+	imagesize = (cam->sensor.pix_format.width *
+		     cam->sensor.pix_format.height *
+		     cam->sensor.pix_format.priv) / 8;
+
+	soflen = (cam->bridge) == BRIDGE_SN9C103 ?
+				  sizeof(sn9c103_sof_header_t) :
+				  sizeof(sn9c102_sof_header_t);
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		unsigned int img, len, status;
+		void *pos, *sof, *eof;
+
+		len = urb->iso_frame_desc[i].actual_length;
+		status = urb->iso_frame_desc[i].status;
+		pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
+
+		if (status) {
+			DBG(3, "Error in isochronous frame");
+			(*f)->state = F_ERROR;
+			continue;
+		}
+
+		PDBGG("Isochrnous frame: length %u, #%u i", len, i);
+
+redo:
+		sof = sn9c102_find_sof_header(cam, pos, len);
+		if (likely(!sof)) {
+			eof = sn9c102_find_eof_header(cam, pos, len);
+			if ((*f)->state == F_GRABBING) {
+end_of_frame:
+				img = len;
+
+				if (eof)
+					img = (eof > pos) ? eof - pos - 1 : 0;
+
+				if ((*f)->buf.bytesused+img > imagesize) {
+					u32 b;
+					b = (*f)->buf.bytesused + img -
+					    imagesize;
+					img = imagesize - (*f)->buf.bytesused;
+					DBG(3, "Expected EOF not found: "
+					       "video frame cut");
+					if (eof)
+						DBG(3, "Exceeded limit: +%u "
+						       "bytes", (unsigned)(b));
+				}
+
+				memcpy((*f)->bufmem + (*f)->buf.bytesused, pos,
+				       img);
+
+				if ((*f)->buf.bytesused == 0)
+					do_gettimeofday(&(*f)->buf.timestamp);
+
+				(*f)->buf.bytesused += img;
+
+				if ((*f)->buf.bytesused == imagesize ||
+				    (cam->sensor.pix_format.pixelformat ==
+						V4L2_PIX_FMT_SN9C10X && eof)) {
+					u32 b;
+					b = (*f)->buf.bytesused;
+					(*f)->state = F_DONE;
+					(*f)->buf.sequence= ++cam->frame_count;
+					spin_lock(&cam->queue_lock);
+					list_move_tail(&(*f)->frame,
+						       &cam->outqueue);
+					if (!list_empty(&cam->inqueue))
+						(*f) = list_entry(
+							cam->inqueue.next,
+							struct sn9c102_frame_t,
+							frame );
+					else
+						(*f) = NULL;
+					spin_unlock(&cam->queue_lock);
+					memcpy(cam->sysfs.frame_header,
+					       cam->sof_header, soflen);
+					DBG(3, "Video frame captured: %lu "
+					       "bytes", (unsigned long)(b));
+
+					if (!(*f))
+						goto resubmit_urb;
+
+				} else if (eof) {
+					(*f)->state = F_ERROR;
+					DBG(3, "Not expected EOF after %lu "
+					       "bytes of image data",
+					    (unsigned long)
+					    ((*f)->buf.bytesused));
+				}
+
+				if (sof) /* (1) */
+					goto start_of_frame;
+
+			} else if (eof) {
+				DBG(3, "EOF without SOF");
+				continue;
+
+			} else {
+				PDBGG("Ignoring pointless isochronous frame");
+				continue;
+			}
+
+		} else if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR) {
+start_of_frame:
+			(*f)->state = F_GRABBING;
+			(*f)->buf.bytesused = 0;
+			len -= (sof - pos);
+			pos = sof;
+			DBG(3, "SOF detected: new video frame");
+			if (len)
+				goto redo;
+
+		} else if ((*f)->state == F_GRABBING) {
+			eof = sn9c102_find_eof_header(cam, pos, len);
+			if (eof && eof < sof)
+				goto end_of_frame; /* (1) */
+			else {
+				if (cam->sensor.pix_format.pixelformat ==
+				    V4L2_PIX_FMT_SN9C10X) {
+					eof = sof - soflen;
+					goto end_of_frame;
+				} else {
+					DBG(3, "SOF before expected EOF after "
+					       "%lu bytes of image data",
+					    (unsigned long)
+					    ((*f)->buf.bytesused));
+					goto start_of_frame;
+				}
+			}
+		}
+	}
+
+resubmit_urb:
+	urb->dev = cam->usbdev;
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0 && err != -EPERM) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "usb_submit_urb() failed");
+	}
+
+	wake_up_interruptible(&cam->wait_frame);
+}
+
+
+static int sn9c102_start_transfer(struct sn9c102_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	struct urb* urb;
+	const unsigned int sn9c102_wMaxPacketSize[] = {0, 128, 256, 384, 512,
+						       680, 800, 900, 1023};
+	const unsigned int sn9c103_wMaxPacketSize[] = {0, 128, 256, 384, 512,
+						       680, 800, 900, 1003};
+	const unsigned int psz = (cam->bridge == BRIDGE_SN9C103) ?
+			    sn9c103_wMaxPacketSize[SN9C102_ALTERNATE_SETTING] :
+			    sn9c102_wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
+	s8 i, j;
+	int err = 0;
+
+	for (i = 0; i < SN9C102_URBS; i++) {
+		cam->transfer_buffer[i] = kzalloc(SN9C102_ISO_PACKETS * psz,
+						  GFP_KERNEL);
+		if (!cam->transfer_buffer[i]) {
+			err = -ENOMEM;
+			DBG(1, "Not enough memory");
+			goto free_buffers;
+		}
+	}
+
+	for (i = 0; i < SN9C102_URBS; i++) {
+		urb = usb_alloc_urb(SN9C102_ISO_PACKETS, GFP_KERNEL);
+		cam->urb[i] = urb;
+		if (!urb) {
+			err = -ENOMEM;
+			DBG(1, "usb_alloc_urb() failed");
+			goto free_urbs;
+		}
+		urb->dev = udev;
+		urb->context = cam;
+		urb->pipe = usb_rcvisocpipe(udev, 1);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->number_of_packets = SN9C102_ISO_PACKETS;
+		urb->complete = sn9c102_urb_complete;
+		urb->transfer_buffer = cam->transfer_buffer[i];
+		urb->transfer_buffer_length = psz * SN9C102_ISO_PACKETS;
+		urb->interval = 1;
+		for (j = 0; j < SN9C102_ISO_PACKETS; j++) {
+			urb->iso_frame_desc[j].offset = psz * j;
+			urb->iso_frame_desc[j].length = psz;
+		}
+	}
+
+	/* Enable video */
+	if (!(cam->reg[0x01] & 0x04)) {
+		err = sn9c102_write_reg(cam, cam->reg[0x01] | 0x04, 0x01);
+		if (err) {
+			err = -EIO;
+			DBG(1, "I/O hardware error");
+			goto free_urbs;
+		}
+	}
+
+	err = usb_set_interface(udev, 0, SN9C102_ALTERNATE_SETTING);
+	if (err) {
+		DBG(1, "usb_set_interface() failed");
+		goto free_urbs;
+	}
+
+	cam->frame_current = NULL;
+
+	for (i = 0; i < SN9C102_URBS; i++) {
+		err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
+		if (err) {
+			for (j = i-1; j >= 0; j--)
+				usb_kill_urb(cam->urb[j]);
+			DBG(1, "usb_submit_urb() failed, error %d", err);
+			goto free_urbs;
+		}
+	}
+
+	return 0;
+
+free_urbs:
+	for (i = 0; (i < SN9C102_URBS) &&  cam->urb[i]; i++)
+		usb_free_urb(cam->urb[i]);
+
+free_buffers:
+	for (i = 0; (i < SN9C102_URBS) && cam->transfer_buffer[i]; i++)
+		kfree(cam->transfer_buffer[i]);
+
+	return err;
+}
+
+
+static int sn9c102_stop_transfer(struct sn9c102_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	s8 i;
+	int err = 0;
+
+	if (cam->state & DEV_DISCONNECTED)
+		return 0;
+
+	for (i = SN9C102_URBS-1; i >= 0; i--) {
+		usb_kill_urb(cam->urb[i]);
+		usb_free_urb(cam->urb[i]);
+		kfree(cam->transfer_buffer[i]);
+	}
+
+	err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
+	if (err)
+		DBG(3, "usb_set_interface() failed");
+
+	return err;
+}
+
+
+static int sn9c102_stream_interrupt(struct sn9c102_device* cam)
+{
+	long timeout;
+
+	cam->stream = STREAM_INTERRUPT;
+	timeout = wait_event_timeout(cam->wait_stream,
+				     (cam->stream == STREAM_OFF) ||
+				     (cam->state & DEV_DISCONNECTED),
+				     SN9C102_URB_TIMEOUT);
+	if (cam->state & DEV_DISCONNECTED)
+		return -ENODEV;
+	else if (cam->stream != STREAM_OFF) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "URB timeout reached. The camera is misconfigured. "
+		       "To use it, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*****************************************************************************/
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static u8 sn9c102_strtou8(const char* buff, size_t len, ssize_t* count)
+{
+	char str[5];
+	char* endp;
+	unsigned long val;
+
+	if (len < 4) {
+		strncpy(str, buff, len);
+		str[len+1] = '\0';
+	} else {
+		strncpy(str, buff, 4);
+		str[4] = '\0';
+	}
+
+	val = simple_strtoul(str, &endp, 0);
+
+	*count = 0;
+	if (val <= 0xff)
+		*count = (ssize_t)(endp - str);
+	if ((*count) && (len == *count+1) && (buff[*count] == '\n'))
+		*count += 1;
+
+	return (u8)val;
+}
+
+/*
+   NOTE 1: being inside one of the following methods implies that the v4l
+	   device exists for sure (see kobjects and reference counters)
+   NOTE 2: buffers are PAGE_SIZE long
+*/
+
+static ssize_t sn9c102_show_reg(struct class_device* cd, char* buf)
+{
+	struct sn9c102_device* cam;
+	ssize_t count;
+
+	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENODEV;
+	}
+
+	count = sprintf(buf, "%u\n", cam->sysfs.reg);
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+sn9c102_store_reg(struct class_device* cd, const char* buf, size_t len)
+{
+	struct sn9c102_device* cam;
+	u8 index;
+	ssize_t count;
+
+	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENODEV;
+	}
+
+	index = sn9c102_strtou8(buf, len, &count);
+	if (index > 0x1f || !count) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -EINVAL;
+	}
+
+	cam->sysfs.reg = index;
+
+	DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg);
+	DBG(3, "Written bytes: %zd", count);
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t sn9c102_show_val(struct class_device* cd, char* buf)
+{
+	struct sn9c102_device* cam;
+	ssize_t count;
+	int val;
+
+	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENODEV;
+	}
+
+	if ((val = sn9c102_read_reg(cam, cam->sysfs.reg)) < 0) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -EIO;
+	}
+
+	count = sprintf(buf, "%d\n", val);
+
+	DBG(3, "Read bytes: %zd", count);
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+sn9c102_store_val(struct class_device* cd, const char* buf, size_t len)
+{
+	struct sn9c102_device* cam;
+	u8 value;
+	ssize_t count;
+	int err;
+
+	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENODEV;
+	}
+
+	value = sn9c102_strtou8(buf, len, &count);
+	if (!count) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -EINVAL;
+	}
+
+	err = sn9c102_write_reg(cam, value, cam->sysfs.reg);
+	if (err) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -EIO;
+	}
+
+	DBG(2, "Written SN9C10X reg. 0x%02X, val. 0x%02X",
+	    cam->sysfs.reg, value);
+	DBG(3, "Written bytes: %zd", count);
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t sn9c102_show_i2c_reg(struct class_device* cd, char* buf)
+{
+	struct sn9c102_device* cam;
+	ssize_t count;
+
+	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENODEV;
+	}
+
+	count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg);
+
+	DBG(3, "Read bytes: %zd", count);
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+sn9c102_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
+{
+	struct sn9c102_device* cam;
+	u8 index;
+	ssize_t count;
+
+	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENODEV;
+	}
+
+	index = sn9c102_strtou8(buf, len, &count);
+	if (!count) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -EINVAL;
+	}
+
+	cam->sysfs.i2c_reg = index;
+
+	DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
+	DBG(3, "Written bytes: %zd", count);
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t sn9c102_show_i2c_val(struct class_device* cd, char* buf)
+{
+	struct sn9c102_device* cam;
+	ssize_t count;
+	int val;
+
+	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENODEV;
+	}
+
+	if (!(cam->sensor.sysfs_ops & SN9C102_I2C_READ)) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENOSYS;
+	}
+
+	if ((val = sn9c102_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -EIO;
+	}
+
+	count = sprintf(buf, "%d\n", val);
+
+	DBG(3, "Read bytes: %zd", count);
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+sn9c102_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
+{
+	struct sn9c102_device* cam;
+	u8 value;
+	ssize_t count;
+	int err;
+
+	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENODEV;
+	}
+
+	if (!(cam->sensor.sysfs_ops & SN9C102_I2C_WRITE)) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENOSYS;
+	}
+
+	value = sn9c102_strtou8(buf, len, &count);
+	if (!count) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -EINVAL;
+	}
+
+	err = sn9c102_i2c_write(cam, cam->sysfs.i2c_reg, value);
+	if (err) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -EIO;
+	}
+
+	DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X",
+	    cam->sysfs.i2c_reg, value);
+	DBG(3, "Written bytes: %zd", count);
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+sn9c102_store_green(struct class_device* cd, const char* buf, size_t len)
+{
+	struct sn9c102_device* cam;
+	enum sn9c102_bridge bridge;
+	ssize_t res = 0;
+	u8 value;
+	ssize_t count;
+
+	if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		mutex_unlock(&sn9c102_sysfs_lock);
+		return -ENODEV;
+	}
+
+	bridge = cam->bridge;
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	value = sn9c102_strtou8(buf, len, &count);
+	if (!count)
+		return -EINVAL;
+
+	switch (bridge) {
+	case BRIDGE_SN9C101:
+	case BRIDGE_SN9C102:
+		if (value > 0x0f)
+			return -EINVAL;
+		if ((res = sn9c102_store_reg(cd, "0x11", 4)) >= 0)
+			res = sn9c102_store_val(cd, buf, len);
+		break;
+	case BRIDGE_SN9C103:
+		if (value > 0x7f)
+			return -EINVAL;
+		if ((res = sn9c102_store_reg(cd, "0x04", 4)) >= 0)
+			res = sn9c102_store_val(cd, buf, len);
+		break;
+	}
+
+	return res;
+}
+
+
+static ssize_t
+sn9c102_store_blue(struct class_device* cd, const char* buf, size_t len)
+{
+	ssize_t res = 0;
+	u8 value;
+	ssize_t count;
+
+	value = sn9c102_strtou8(buf, len, &count);
+	if (!count || value > 0x7f)
+		return -EINVAL;
+
+	if ((res = sn9c102_store_reg(cd, "0x06", 4)) >= 0)
+		res = sn9c102_store_val(cd, buf, len);
+
+	return res;
+}
+
+
+static ssize_t
+sn9c102_store_red(struct class_device* cd, const char* buf, size_t len)
+{
+	ssize_t res = 0;
+	u8 value;
+	ssize_t count;
+
+	value = sn9c102_strtou8(buf, len, &count);
+	if (!count || value > 0x7f)
+		return -EINVAL;
+
+	if ((res = sn9c102_store_reg(cd, "0x05", 4)) >= 0)
+		res = sn9c102_store_val(cd, buf, len);
+
+	return res;
+}
+
+
+static ssize_t sn9c102_show_frame_header(struct class_device* cd, char* buf)
+{
+	struct sn9c102_device* cam;
+	ssize_t count;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam)
+		return -ENODEV;
+
+	count = sizeof(cam->sysfs.frame_header);
+	memcpy(buf, cam->sysfs.frame_header, count);
+
+	DBG(3, "Frame header, read bytes: %zd", count);
+
+	return count;
+}
+
+
+static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
+			 sn9c102_show_reg, sn9c102_store_reg);
+static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
+			 sn9c102_show_val, sn9c102_store_val);
+static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
+			 sn9c102_show_i2c_reg, sn9c102_store_i2c_reg);
+static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
+			 sn9c102_show_i2c_val, sn9c102_store_i2c_val);
+static CLASS_DEVICE_ATTR(green, S_IWUGO, NULL, sn9c102_store_green);
+static CLASS_DEVICE_ATTR(blue, S_IWUGO, NULL, sn9c102_store_blue);
+static CLASS_DEVICE_ATTR(red, S_IWUGO, NULL, sn9c102_store_red);
+static CLASS_DEVICE_ATTR(frame_header, S_IRUGO,
+			 sn9c102_show_frame_header, NULL);
+
+
+static void sn9c102_create_sysfs(struct sn9c102_device* cam)
+{
+	struct video_device *v4ldev = cam->v4ldev;
+
+	video_device_create_file(v4ldev, &class_device_attr_reg);
+	video_device_create_file(v4ldev, &class_device_attr_val);
+	video_device_create_file(v4ldev, &class_device_attr_frame_header);
+	if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102)
+		video_device_create_file(v4ldev, &class_device_attr_green);
+	else if (cam->bridge == BRIDGE_SN9C103) {
+		video_device_create_file(v4ldev, &class_device_attr_blue);
+		video_device_create_file(v4ldev, &class_device_attr_red);
+	}
+	if (cam->sensor.sysfs_ops) {
+		video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
+		video_device_create_file(v4ldev, &class_device_attr_i2c_val);
+	}
+}
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
+
+/*****************************************************************************/
+
+static int
+sn9c102_set_pix_format(struct sn9c102_device* cam, struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, cam->reg[0x18] | 0x80, 0x18);
+	else
+		err += sn9c102_write_reg(cam, cam->reg[0x18] & 0x7f, 0x18);
+
+	return err ? -EIO : 0;
+}
+
+
+static int
+sn9c102_set_compression(struct sn9c102_device* cam,
+			struct v4l2_jpegcompression* compression)
+{
+	int err = 0;
+
+	if (compression->quality == 0)
+		err += sn9c102_write_reg(cam, cam->reg[0x17] | 0x01, 0x17);
+	else if (compression->quality == 1)
+		err += sn9c102_write_reg(cam, cam->reg[0x17] & 0xfe, 0x17);
+
+	return err ? -EIO : 0;
+}
+
+
+static int sn9c102_set_scale(struct sn9c102_device* cam, u8 scale)
+{
+	u8 r = 0;
+	int err = 0;
+
+	if (scale == 1)
+		r = cam->reg[0x18] & 0xcf;
+	else if (scale == 2) {
+		r = cam->reg[0x18] & 0xcf;
+		r |= 0x10;
+	} else if (scale == 4)
+		r = cam->reg[0x18] | 0x20;
+
+	err += sn9c102_write_reg(cam, r, 0x18);
+	if (err)
+		return -EIO;
+
+	PDBGG("Scaling factor: %u", scale);
+
+	return 0;
+}
+
+
+static int sn9c102_set_crop(struct sn9c102_device* cam, struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &cam->sensor;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left),
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top),
+	   h_size = (u8)(rect->width / 16),
+	   v_size = (u8)(rect->height / 16);
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+	err += sn9c102_write_reg(cam, h_size, 0x15);
+	err += sn9c102_write_reg(cam, v_size, 0x16);
+	if (err)
+		return -EIO;
+
+	PDBGG("h_start, v_start, h_size, v_size, ho_size, vo_size "
+	      "%u %u %u %u", h_start, v_start, h_size, v_size);
+
+	return 0;
+}
+
+
+static int sn9c102_init(struct sn9c102_device* cam)
+{
+	struct sn9c102_sensor* s = &cam->sensor;
+	struct v4l2_control ctrl;
+	struct v4l2_queryctrl *qctrl;
+	struct v4l2_rect* rect;
+	u8 i = 0;
+	int err = 0;
+
+	if (!(cam->state & DEV_INITIALIZED)) {
+		init_waitqueue_head(&cam->open);
+		qctrl = s->qctrl;
+		rect = &(s->cropcap.defrect);
+	} else { /* use current values */
+		qctrl = s->_qctrl;
+		rect = &(s->_rect);
+	}
+
+	err += sn9c102_set_scale(cam, rect->width / s->pix_format.width);
+	err += sn9c102_set_crop(cam, rect);
+	if (err)
+		return err;
+
+	if (s->init) {
+		err = s->init(cam);
+		if (err) {
+			DBG(3, "Sensor initialization failed");
+			return err;
+		}
+	}
+
+	if (!(cam->state & DEV_INITIALIZED))
+		cam->compression.quality =  cam->reg[0x17] & 0x01 ? 0 : 1;
+	else
+		err += sn9c102_set_compression(cam, &cam->compression);
+	err += sn9c102_set_pix_format(cam, &s->pix_format);
+	if (s->set_pix_format)
+		err += s->set_pix_format(cam, &s->pix_format);
+	if (err)
+		return err;
+
+	if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X)
+		DBG(3, "Compressed video format is active, quality %d",
+		    cam->compression.quality);
+	else
+		DBG(3, "Uncompressed video format is active");
+
+	if (s->set_crop)
+		if ((err = s->set_crop(cam, rect))) {
+			DBG(3, "set_crop() failed");
+			return err;
+		}
+
+	if (s->set_ctrl) {
+		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+			if (s->qctrl[i].id != 0 &&
+			    !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) {
+				ctrl.id = s->qctrl[i].id;
+				ctrl.value = qctrl[i].default_value;
+				err = s->set_ctrl(cam, &ctrl);
+				if (err) {
+					DBG(3, "Set %s control failed",
+					    s->qctrl[i].name);
+					return err;
+				}
+				DBG(3, "Image sensor supports '%s' control",
+				    s->qctrl[i].name);
+			}
+	}
+
+	if (!(cam->state & DEV_INITIALIZED)) {
+		mutex_init(&cam->fileop_mutex);
+		spin_lock_init(&cam->queue_lock);
+		init_waitqueue_head(&cam->wait_frame);
+		init_waitqueue_head(&cam->wait_stream);
+		cam->nreadbuffers = 2;
+		memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl));
+		memcpy(&(s->_rect), &(s->cropcap.defrect),
+		       sizeof(struct v4l2_rect));
+		cam->state |= DEV_INITIALIZED;
+	}
+
+	DBG(2, "Initialization succeeded");
+	return 0;
+}
+
+
+static void sn9c102_release_resources(struct sn9c102_device* cam)
+{
+	mutex_lock(&sn9c102_sysfs_lock);
+
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	video_set_drvdata(cam->v4ldev, NULL);
+	video_unregister_device(cam->v4ldev);
+
+	usb_put_dev(cam->usbdev);
+
+	mutex_unlock(&sn9c102_sysfs_lock);
+
+	kfree(cam->control_buffer);
+}
+
+/*****************************************************************************/
+
+static int sn9c102_open(struct inode* inode, struct file* filp)
+{
+	struct sn9c102_device* cam;
+	int err = 0;
+
+	/*
+	   This is the only safe way to prevent race conditions with
+	   disconnect
+	*/
+	if (!down_read_trylock(&sn9c102_disconnect))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(video_devdata(filp));
+
+	if (mutex_lock_interruptible(&cam->dev_mutex)) {
+		up_read(&sn9c102_disconnect);
+		return -ERESTARTSYS;
+	}
+
+	if (cam->users) {
+		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+		if ((filp->f_flags & O_NONBLOCK) ||
+		    (filp->f_flags & O_NDELAY)) {
+			err = -EWOULDBLOCK;
+			goto out;
+		}
+		mutex_unlock(&cam->dev_mutex);
+		err = wait_event_interruptible_exclusive(cam->open,
+						  cam->state & DEV_DISCONNECTED
+							 || !cam->users);
+		if (err) {
+			up_read(&sn9c102_disconnect);
+			return err;
+		}
+		if (cam->state & DEV_DISCONNECTED) {
+			up_read(&sn9c102_disconnect);
+			return -ENODEV;
+		}
+		mutex_lock(&cam->dev_mutex);
+	}
+
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		err = sn9c102_init(cam);
+		if (err) {
+			DBG(1, "Initialization failed again. "
+			       "I will retry on next open().");
+			goto out;
+		}
+		cam->state &= ~DEV_MISCONFIGURED;
+	}
+
+	if ((err = sn9c102_start_transfer(cam)))
+		goto out;
+
+	filp->private_data = cam;
+	cam->users++;
+	cam->io = IO_NONE;
+	cam->stream = STREAM_OFF;
+	cam->nbuffers = 0;
+	cam->frame_count = 0;
+	sn9c102_empty_framequeues(cam);
+
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+
+out:
+	mutex_unlock(&cam->dev_mutex);
+	up_read(&sn9c102_disconnect);
+	return err;
+}
+
+
+static int sn9c102_release(struct inode* inode, struct file* filp)
+{
+	struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
+
+	mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */
+
+	sn9c102_stop_transfer(cam);
+
+	sn9c102_release_buffers(cam);
+
+	if (cam->state & DEV_DISCONNECTED) {
+		sn9c102_release_resources(cam);
+		mutex_unlock(&cam->dev_mutex);
+		kfree(cam);
+		return 0;
+	}
+
+	cam->users--;
+	wake_up_interruptible_nr(&cam->open, 1);
+
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+
+	mutex_unlock(&cam->dev_mutex);
+
+	return 0;
+}
+
+
+static ssize_t
+sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
+{
+	struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
+	struct sn9c102_frame_t* f, * i;
+	unsigned long lock_flags;
+	long timeout;
+	int err = 0;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	if (cam->io == IO_MMAP) {
+		DBG(3, "Close and open the device again to choose "
+		       "the read method");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EINVAL;
+	}
+
+	if (cam->io == IO_NONE) {
+		if (!sn9c102_request_buffers(cam,cam->nreadbuffers, IO_READ)) {
+			DBG(1, "read() failed, not enough memory");
+			mutex_unlock(&cam->fileop_mutex);
+			return -ENOMEM;
+		}
+		cam->io = IO_READ;
+		cam->stream = STREAM_ON;
+	}
+
+	if (list_empty(&cam->inqueue)) {
+		if (!list_empty(&cam->outqueue))
+			sn9c102_empty_framequeues(cam);
+		sn9c102_queue_unusedframes(cam);
+	}
+
+	if (!count) {
+		mutex_unlock(&cam->fileop_mutex);
+		return 0;
+	}
+
+	if (list_empty(&cam->outqueue)) {
+		if (filp->f_flags & O_NONBLOCK) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -EAGAIN;
+		}
+		timeout = wait_event_interruptible_timeout
+			  ( cam->wait_frame,
+			    (!list_empty(&cam->outqueue)) ||
+			    (cam->state & DEV_DISCONNECTED) ||
+			    (cam->state & DEV_MISCONFIGURED),
+			    cam->module_param.frame_timeout *
+			    1000 * msecs_to_jiffies(1) );
+		if (timeout < 0) {
+			mutex_unlock(&cam->fileop_mutex);
+			return timeout;
+		}
+		if (cam->state & DEV_DISCONNECTED) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -ENODEV;
+		}
+		if (!timeout || (cam->state & DEV_MISCONFIGURED)) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -EIO;
+		}
+	}
+
+	f = list_entry(cam->outqueue.prev, struct sn9c102_frame_t, frame);
+
+	if (count > f->buf.bytesused)
+		count = f->buf.bytesused;
+
+	if (copy_to_user(buf, f->bufmem, count)) {
+		err = -EFAULT;
+		goto exit;
+	}
+	*f_pos += count;
+
+exit:
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	list_for_each_entry(i, &cam->outqueue, frame)
+		i->state = F_UNUSED;
+	INIT_LIST_HEAD(&cam->outqueue);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	sn9c102_queue_unusedframes(cam);
+
+	PDBGG("Frame #%lu, bytes read: %zu",
+	      (unsigned long)f->buf.index, count);
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return count;
+}
+
+
+static unsigned int sn9c102_poll(struct file *filp, poll_table *wait)
+{
+	struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
+	struct sn9c102_frame_t* f;
+	unsigned long lock_flags;
+	unsigned int mask = 0;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return POLLERR;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		goto error;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		goto error;
+	}
+
+	if (cam->io == IO_NONE) {
+		if (!sn9c102_request_buffers(cam, cam->nreadbuffers,
+					     IO_READ)) {
+			DBG(1, "poll() failed, not enough memory");
+			goto error;
+		}
+		cam->io = IO_READ;
+		cam->stream = STREAM_ON;
+	}
+
+	if (cam->io == IO_READ) {
+		spin_lock_irqsave(&cam->queue_lock, lock_flags);
+		list_for_each_entry(f, &cam->outqueue, frame)
+			f->state = F_UNUSED;
+		INIT_LIST_HEAD(&cam->outqueue);
+		spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+		sn9c102_queue_unusedframes(cam);
+	}
+
+	poll_wait(filp, &cam->wait_frame, wait);
+
+	if (!list_empty(&cam->outqueue))
+		mask |= POLLIN | POLLRDNORM;
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return mask;
+
+error:
+	mutex_unlock(&cam->fileop_mutex);
+	return POLLERR;
+}
+
+
+static void sn9c102_vm_open(struct vm_area_struct* vma)
+{
+	struct sn9c102_frame_t* f = vma->vm_private_data;
+	f->vma_use_count++;
+}
+
+
+static void sn9c102_vm_close(struct vm_area_struct* vma)
+{
+	/* NOTE: buffers are not freed here */
+	struct sn9c102_frame_t* f = vma->vm_private_data;
+	f->vma_use_count--;
+}
+
+
+static struct vm_operations_struct sn9c102_vm_ops = {
+	.open = sn9c102_vm_open,
+	.close = sn9c102_vm_close,
+};
+
+
+static int sn9c102_mmap(struct file* filp, struct vm_area_struct *vma)
+{
+	struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
+	unsigned long size = vma->vm_end - vma->vm_start,
+		      start = vma->vm_start;
+	void *pos;
+	u32 i;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
+	    size != PAGE_ALIGN(cam->frame[0].buf.length)) {
+		mutex_unlock(&cam->fileop_mutex);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff)
+			break;
+	}
+	if (i == cam->nbuffers) {
+		mutex_unlock(&cam->fileop_mutex);
+		return -EINVAL;
+	}
+
+	vma->vm_flags |= VM_IO;
+	vma->vm_flags |= VM_RESERVED;
+
+	pos = cam->frame[i].bufmem;
+	while (size > 0) { /* size is page-aligned */
+		if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -EAGAIN;
+		}
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	vma->vm_ops = &sn9c102_vm_ops;
+	vma->vm_private_data = &cam->frame[i];
+
+	sn9c102_vm_open(vma);
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return 0;
+}
+
+/*****************************************************************************/
+
+static int
+sn9c102_vidioc_querycap(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_capability cap = {
+		.driver = "sn9c102",
+		.version = SN9C102_MODULE_VERSION_CODE,
+		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+				V4L2_CAP_STREAMING,
+	};
+
+	strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
+	if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
+		strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
+			sizeof(cap.bus_info));
+
+	if (copy_to_user(arg, &cap, sizeof(cap)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_input i;
+
+	if (copy_from_user(&i, arg, sizeof(i)))
+		return -EFAULT;
+
+	if (i.index)
+		return -EINVAL;
+
+	memset(&i, 0, sizeof(i));
+	strcpy(i.name, "Camera");
+	i.type = V4L2_INPUT_TYPE_CAMERA;
+
+	if (copy_to_user(arg, &i, sizeof(i)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_input(struct sn9c102_device* cam, void __user * arg)
+{
+	int index = 0;
+
+	if (copy_to_user(arg, &index, sizeof(index)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_input(struct sn9c102_device* cam, void __user * arg)
+{
+	int index;
+
+	if (copy_from_user(&index, arg, sizeof(index)))
+		return -EFAULT;
+
+	if (index != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_query_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = &cam->sensor;
+	struct v4l2_queryctrl qc;
+	u8 i;
+
+	if (copy_from_user(&qc, arg, sizeof(qc)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (qc.id && qc.id == s->qctrl[i].id) {
+			memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
+			if (copy_to_user(arg, &qc, sizeof(qc)))
+				return -EFAULT;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+
+static int
+sn9c102_vidioc_g_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = &cam->sensor;
+	struct v4l2_control ctrl;
+	int err = 0;
+	u8 i;
+
+	if (!s->get_ctrl && !s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	if (!s->get_ctrl) {
+		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+			if (ctrl.id && ctrl.id == s->qctrl[i].id) {
+				ctrl.value = s->_qctrl[i].default_value;
+				goto exit;
+			}
+		return -EINVAL;
+	} else
+		err = s->get_ctrl(cam, &ctrl);
+
+exit:
+	if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
+		return -EFAULT;
+
+	return err;
+}
+
+
+static int
+sn9c102_vidioc_s_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = &cam->sensor;
+	struct v4l2_control ctrl;
+	u8 i;
+	int err = 0;
+
+	if (!s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (ctrl.id == s->qctrl[i].id) {
+			if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)
+				return -EINVAL;
+			if (ctrl.value < s->qctrl[i].minimum ||
+			    ctrl.value > s->qctrl[i].maximum)
+				return -ERANGE;
+			ctrl.value -= ctrl.value % s->qctrl[i].step;
+			break;
+		}
+
+	if ((err = s->set_ctrl(cam, &ctrl)))
+		return err;
+
+	s->_qctrl[i].default_value = ctrl.value;
+
+	PDBGG("VIDIOC_S_CTRL: id %lu, value %lu",
+	      (unsigned long)ctrl.id, (unsigned long)ctrl.value);
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_cropcap(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_cropcap* cc = &(cam->sensor.cropcap);
+
+	cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	cc->pixelaspect.numerator = 1;
+	cc->pixelaspect.denominator = 1;
+
+	if (copy_to_user(arg, cc, sizeof(*cc)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_crop(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = &cam->sensor;
+	struct v4l2_crop crop = {
+		.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+	};
+
+	memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
+
+	if (copy_to_user(arg, &crop, sizeof(crop)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = &cam->sensor;
+	struct v4l2_crop crop;
+	struct v4l2_rect* rect;
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	struct v4l2_pix_format* pix_format = &(s->pix_format);
+	u8 scale;
+	const enum sn9c102_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&crop, arg, sizeof(crop)))
+		return -EFAULT;
+
+	rect = &(crop.c);
+
+	if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_CROP failed. "
+				       "Unmap the buffers first.");
+				return -EINVAL;
+			}
+
+	/* Preserve R,G or B origin */
+	rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
+	rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
+
+	if (rect->width < 16)
+		rect->width = 16;
+	if (rect->height < 16)
+		rect->height = 16;
+	if (rect->width > bounds->width)
+		rect->width = bounds->width;
+	if (rect->height > bounds->height)
+		rect->height = bounds->height;
+	if (rect->left < bounds->left)
+		rect->left = bounds->left;
+	if (rect->top < bounds->top)
+		rect->top = bounds->top;
+	if (rect->left + rect->width > bounds->left + bounds->width)
+		rect->left = bounds->left+bounds->width - rect->width;
+	if (rect->top + rect->height > bounds->top + bounds->height)
+		rect->top = bounds->top+bounds->height - rect->height;
+
+	rect->width &= ~15L;
+	rect->height &= ~15L;
+
+	if (SN9C102_PRESERVE_IMGSCALE) {
+		/* Calculate the actual scaling factor */
+		u32 a, b;
+		a = rect->width * rect->height;
+		b = pix_format->width * pix_format->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+	} else
+		scale = 1;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &crop, sizeof(crop))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap || cam->io == IO_READ)
+		sn9c102_release_buffers(cam);
+
+	err = sn9c102_set_crop(cam, rect);
+	if (s->set_crop)
+		err += s->set_crop(cam, rect);
+	err += sn9c102_set_scale(cam, scale);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	s->pix_format.width = rect->width/scale;
+	s->pix_format.height = rect->height/scale;
+	memcpy(&(s->_rect), rect, sizeof(*rect));
+
+	if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+	    nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		sn9c102_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		sn9c102_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_enum_fmt(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_fmtdesc fmtd;
+
+	if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
+		return -EFAULT;
+
+	if (fmtd.index == 0) {
+		strcpy(fmtd.description, "bayer rgb");
+		fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
+	} else if (fmtd.index == 1) {
+		strcpy(fmtd.description, "compressed");
+		fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X;
+		fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
+	} else
+		return -EINVAL;
+
+	fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
+
+	if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_fmt(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_format format;
+	struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format);
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X)
+			     ? 0 : (pfmt->width * pfmt->priv) / 8;
+	pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
+	pfmt->field = V4L2_FIELD_NONE;
+	memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
+
+	if (copy_to_user(arg, &format, sizeof(format)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
+			 void __user * arg)
+{
+	struct sn9c102_sensor* s = &cam->sensor;
+	struct v4l2_format format;
+	struct v4l2_pix_format* pix;
+	struct v4l2_pix_format* pfmt = &(s->pix_format);
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	struct v4l2_rect rect;
+	u8 scale;
+	const enum sn9c102_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	pix = &(format.fmt.pix);
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	memcpy(&rect, &(s->_rect), sizeof(rect));
+
+	{ /* calculate the actual scaling factor */
+		u32 a, b;
+		a = rect.width * rect.height;
+		b = pix->width * pix->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+	}
+
+	rect.width = scale * pix->width;
+	rect.height = scale * pix->height;
+
+	if (rect.width < 16)
+		rect.width = 16;
+	if (rect.height < 16)
+		rect.height = 16;
+	if (rect.width > bounds->left + bounds->width - rect.left)
+		rect.width = bounds->left + bounds->width - rect.left;
+	if (rect.height > bounds->top + bounds->height - rect.top)
+		rect.height = bounds->top + bounds->height - rect.top;
+
+	rect.width &= ~15L;
+	rect.height &= ~15L;
+
+	{ /* adjust the scaling factor */
+		u32 a, b;
+		a = rect.width * rect.height;
+		b = pix->width * pix->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+	}
+
+	pix->width = rect.width / scale;
+	pix->height = rect.height / scale;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X &&
+	    pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
+		pix->pixelformat = pfmt->pixelformat;
+	pix->priv = pfmt->priv; /* bpp */
+	pix->colorspace = pfmt->colorspace;
+	pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+			    ? 0 : (pix->width * pix->priv) / 8;
+	pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
+	pix->field = V4L2_FIELD_NONE;
+
+	if (cmd == VIDIOC_TRY_FMT) {
+		if (copy_to_user(arg, &format, sizeof(format)))
+			return -EFAULT;
+		return 0;
+	}
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_FMT failed. Unmap the "
+				       "buffers first.");
+				return -EINVAL;
+			}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &format, sizeof(format))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap  || cam->io == IO_READ)
+		sn9c102_release_buffers(cam);
+
+	err += sn9c102_set_pix_format(cam, pix);
+	err += sn9c102_set_crop(cam, &rect);
+	if (s->set_pix_format)
+		err += s->set_pix_format(cam, pix);
+	if (s->set_crop)
+		err += s->set_crop(cam, &rect);
+	err += sn9c102_set_scale(cam, scale);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	memcpy(pfmt, pix, sizeof(*pix));
+	memcpy(&(s->_rect), &rect, sizeof(rect));
+
+	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
+	    nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		sn9c102_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		sn9c102_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_jpegcomp(struct sn9c102_device* cam, void __user * arg)
+{
+	if (copy_to_user(arg, &cam->compression,
+			 sizeof(cam->compression)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_jpegcomp(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_jpegcompression jc;
+	const enum sn9c102_stream_state stream = cam->stream;
+	int err = 0;
+
+	if (copy_from_user(&jc, arg, sizeof(jc)))
+		return -EFAULT;
+
+	if (jc.quality != 0 && jc.quality != 1)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	err += sn9c102_set_compression(cam, &jc);
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
+		       "problems. To use the camera, close and open "
+		       "/dev/video%d again.", cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	cam->compression.quality = jc.quality;
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_reqbufs(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_requestbuffers rb;
+	u32 i;
+	int err;
+
+	if (copy_from_user(&rb, arg, sizeof(rb)))
+		return -EFAULT;
+
+	if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    rb.memory != V4L2_MEMORY_MMAP)
+		return -EINVAL;
+
+	if (cam->io == IO_READ) {
+		DBG(3, "Close and open the device again to choose the mmap "
+		       "I/O method");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++)
+		if (cam->frame[i].vma_use_count) {
+			DBG(3, "VIDIOC_REQBUFS failed. Previous buffers are "
+			       "still mapped.");
+			return -EINVAL;
+		}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	sn9c102_empty_framequeues(cam);
+
+	sn9c102_release_buffers(cam);
+	if (rb.count)
+		rb.count = sn9c102_request_buffers(cam, rb.count, IO_MMAP);
+
+	if (copy_to_user(arg, &rb, sizeof(rb))) {
+		sn9c102_release_buffers(cam);
+		cam->io = IO_NONE;
+		return -EFAULT;
+	}
+
+	cam->io = rb.count ? IO_MMAP : IO_NONE;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_querybuf(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
+
+	if (cam->frame[b.index].vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (cam->frame[b.index].state == F_DONE)
+		b.flags |= V4L2_BUF_FLAG_DONE;
+	else if (cam->frame[b.index].state != F_UNUSED)
+		b.flags |= V4L2_BUF_FLAG_QUEUED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_qbuf(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+	unsigned long lock_flags;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->frame[b.index].state != F_UNUSED)
+		return -EINVAL;
+
+	cam->frame[b.index].state = F_QUEUED;
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	PDBGG("Frame #%lu queued", (unsigned long)b.index);
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
+		     void __user * arg)
+{
+	struct v4l2_buffer b;
+	struct sn9c102_frame_t *f;
+	unsigned long lock_flags;
+	long timeout;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->outqueue)) {
+		if (cam->stream == STREAM_OFF)
+			return -EINVAL;
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		timeout = wait_event_interruptible_timeout
+			  ( cam->wait_frame,
+			    (!list_empty(&cam->outqueue)) ||
+			    (cam->state & DEV_DISCONNECTED) ||
+			    (cam->state & DEV_MISCONFIGURED),
+			    cam->module_param.frame_timeout *
+			    1000 * msecs_to_jiffies(1) );
+		if (timeout < 0)
+			return timeout;
+		if (cam->state & DEV_DISCONNECTED)
+			return -ENODEV;
+		if (!timeout || (cam->state & DEV_MISCONFIGURED))
+			return -EIO;
+	}
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	f = list_entry(cam->outqueue.next, struct sn9c102_frame_t, frame);
+	list_del(cam->outqueue.next);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	f->state = F_UNUSED;
+
+	memcpy(&b, &f->buf, sizeof(b));
+	if (f->vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_streamon(struct sn9c102_device* cam, void __user * arg)
+{
+	int type;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->inqueue))
+		return -EINVAL;
+
+	cam->stream = STREAM_ON;
+
+	DBG(3, "Stream on");
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_streamoff(struct sn9c102_device* cam, void __user * arg)
+{
+	int type, err;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	sn9c102_empty_framequeues(cam);
+
+	DBG(3, "Stream off");
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_parm(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+	sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_parm(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+
+	if (sp.parm.capture.readbuffers == 0)
+		sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (sp.parm.capture.readbuffers > SN9C102_MAX_FRAMES)
+		sp.parm.capture.readbuffers = SN9C102_MAX_FRAMES;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	cam->nreadbuffers = sp.parm.capture.readbuffers;
+
+	return 0;
+}
+
+
+static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp,
+			      unsigned int cmd, void __user * arg)
+{
+	struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
+
+	switch (cmd) {
+
+	case VIDIOC_QUERYCAP:
+		return sn9c102_vidioc_querycap(cam, arg);
+
+	case VIDIOC_ENUMINPUT:
+		return sn9c102_vidioc_enuminput(cam, arg);
+
+	case VIDIOC_G_INPUT:
+		return sn9c102_vidioc_g_input(cam, arg);
+
+	case VIDIOC_S_INPUT:
+		return sn9c102_vidioc_s_input(cam, arg);
+
+	case VIDIOC_QUERYCTRL:
+		return sn9c102_vidioc_query_ctrl(cam, arg);
+
+	case VIDIOC_G_CTRL:
+		return sn9c102_vidioc_g_ctrl(cam, arg);
+
+	case VIDIOC_S_CTRL_OLD:
+	case VIDIOC_S_CTRL:
+		return sn9c102_vidioc_s_ctrl(cam, arg);
+
+	case VIDIOC_CROPCAP_OLD:
+	case VIDIOC_CROPCAP:
+		return sn9c102_vidioc_cropcap(cam, arg);
+
+	case VIDIOC_G_CROP:
+		return sn9c102_vidioc_g_crop(cam, arg);
+
+	case VIDIOC_S_CROP:
+		return sn9c102_vidioc_s_crop(cam, arg);
+
+	case VIDIOC_ENUM_FMT:
+		return sn9c102_vidioc_enum_fmt(cam, arg);
+
+	case VIDIOC_G_FMT:
+		return sn9c102_vidioc_g_fmt(cam, arg);
+
+	case VIDIOC_TRY_FMT:
+	case VIDIOC_S_FMT:
+		return sn9c102_vidioc_try_s_fmt(cam, cmd, arg);
+
+	case VIDIOC_G_JPEGCOMP:
+		return sn9c102_vidioc_g_jpegcomp(cam, arg);
+
+	case VIDIOC_S_JPEGCOMP:
+		return sn9c102_vidioc_s_jpegcomp(cam, arg);
+
+	case VIDIOC_REQBUFS:
+		return sn9c102_vidioc_reqbufs(cam, arg);
+
+	case VIDIOC_QUERYBUF:
+		return sn9c102_vidioc_querybuf(cam, arg);
+
+	case VIDIOC_QBUF:
+		return sn9c102_vidioc_qbuf(cam, arg);
+
+	case VIDIOC_DQBUF:
+		return sn9c102_vidioc_dqbuf(cam, filp, arg);
+
+	case VIDIOC_STREAMON:
+		return sn9c102_vidioc_streamon(cam, arg);
+
+	case VIDIOC_STREAMOFF:
+		return sn9c102_vidioc_streamoff(cam, arg);
+
+	case VIDIOC_G_PARM:
+		return sn9c102_vidioc_g_parm(cam, arg);
+
+	case VIDIOC_S_PARM_OLD:
+	case VIDIOC_S_PARM:
+		return sn9c102_vidioc_s_parm(cam, arg);
+
+	case VIDIOC_G_STD:
+	case VIDIOC_S_STD:
+	case VIDIOC_QUERYSTD:
+	case VIDIOC_ENUMSTD:
+	case VIDIOC_QUERYMENU:
+		return -EINVAL;
+
+	default:
+		return -EINVAL;
+
+	}
+}
+
+
+static int sn9c102_ioctl(struct inode* inode, struct file* filp,
+			 unsigned int cmd, unsigned long arg)
+{
+	struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
+	int err = 0;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	V4LDBG(3, "sn9c102", cmd);
+
+	err = sn9c102_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return err;
+}
+
+/*****************************************************************************/
+
+static struct file_operations sn9c102_fops = {
+	.owner = THIS_MODULE,
+	.open =    sn9c102_open,
+	.release = sn9c102_release,
+	.ioctl =   sn9c102_ioctl,
+	.read =    sn9c102_read,
+	.poll =    sn9c102_poll,
+	.mmap =    sn9c102_mmap,
+	.llseek =  no_llseek,
+};
+
+/*****************************************************************************/
+
+/* It exists a single interface only. We do not need to validate anything. */
+static int
+sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct sn9c102_device* cam;
+	static unsigned int dev_nr = 0;
+	unsigned int i;
+	int err = 0, r;
+
+	if (!(cam = kzalloc(sizeof(struct sn9c102_device), GFP_KERNEL)))
+		return -ENOMEM;
+
+	cam->usbdev = udev;
+
+	if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
+		DBG(1, "kmalloc() failed");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	if (!(cam->v4ldev = video_device_alloc())) {
+		DBG(1, "video_device_alloc() failed");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	mutex_init(&cam->dev_mutex);
+
+	r = sn9c102_read_reg(cam, 0x00);
+	if (r < 0 || r != 0x10) {
+		DBG(1, "Sorry, this is not a SN9C10x based camera "
+		       "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
+		err = -ENODEV;
+		goto fail;
+	}
+
+	cam->bridge = (id->idProduct & 0xffc0) == 0x6080 ?
+		      BRIDGE_SN9C103 : BRIDGE_SN9C102;
+	switch (cam->bridge) {
+	case BRIDGE_SN9C101:
+	case BRIDGE_SN9C102:
+		DBG(2, "SN9C10[12] PC Camera Controller detected "
+		       "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
+		break;
+	case BRIDGE_SN9C103:
+		DBG(2, "SN9C103 PC Camera Controller detected "
+		       "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
+		break;
+	}
+
+	for  (i = 0; sn9c102_sensor_table[i]; i++) {
+		err = sn9c102_sensor_table[i](cam);
+		if (!err)
+			break;
+	}
+
+	if (!err) {
+		DBG(2, "%s image sensor detected", cam->sensor.name);
+		DBG(3, "Support for %s maintained by %s",
+		    cam->sensor.name, cam->sensor.maintainer);
+	} else {
+		DBG(1, "No supported image sensor detected");
+		err = -ENODEV;
+		goto fail;
+	}
+
+	if (sn9c102_init(cam)) {
+		DBG(1, "Initialization failed. I will retry on open().");
+		cam->state |= DEV_MISCONFIGURED;
+	}
+
+	strcpy(cam->v4ldev->name, "SN9C10x PC Camera");
+	cam->v4ldev->owner = THIS_MODULE;
+	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
+	cam->v4ldev->hardware = 0;
+	cam->v4ldev->fops = &sn9c102_fops;
+	cam->v4ldev->minor = video_nr[dev_nr];
+	cam->v4ldev->release = video_device_release;
+	video_set_drvdata(cam->v4ldev, cam);
+
+	mutex_lock(&cam->dev_mutex);
+
+	err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
+				    video_nr[dev_nr]);
+	if (err) {
+		DBG(1, "V4L2 device registration failed");
+		if (err == -ENFILE && video_nr[dev_nr] == -1)
+			DBG(1, "Free /dev/videoX node not found");
+		video_nr[dev_nr] = -1;
+		dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
+		mutex_unlock(&cam->dev_mutex);
+		goto fail;
+	}
+
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+
+	cam->module_param.force_munmap = force_munmap[dev_nr];
+	cam->module_param.frame_timeout = frame_timeout[dev_nr];
+
+	dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	sn9c102_create_sysfs(cam);
+	DBG(2, "Optional device control through 'sysfs' interface ready");
+#endif
+
+	usb_set_intfdata(intf, cam);
+
+	mutex_unlock(&cam->dev_mutex);
+
+	return 0;
+
+fail:
+	if (cam) {
+		kfree(cam->control_buffer);
+		if (cam->v4ldev)
+			video_device_release(cam->v4ldev);
+		kfree(cam);
+	}
+	return err;
+}
+
+
+static void sn9c102_usb_disconnect(struct usb_interface* intf)
+{
+	struct sn9c102_device* cam = usb_get_intfdata(intf);
+
+	if (!cam)
+		return;
+
+	down_write(&sn9c102_disconnect);
+
+	mutex_lock(&cam->dev_mutex);
+
+	DBG(2, "Disconnecting %s...", cam->v4ldev->name);
+
+	wake_up_interruptible_all(&cam->open);
+
+	if (cam->users) {
+		DBG(2, "Device /dev/video%d is open! Deregistration and "
+		       "memory deallocation are deferred on close.",
+		    cam->v4ldev->minor);
+		cam->state |= DEV_MISCONFIGURED;
+		sn9c102_stop_transfer(cam);
+		cam->state |= DEV_DISCONNECTED;
+		wake_up_interruptible(&cam->wait_frame);
+		wake_up(&cam->wait_stream);
+		usb_get_dev(cam->usbdev);
+	} else {
+		cam->state |= DEV_DISCONNECTED;
+		sn9c102_release_resources(cam);
+	}
+
+	mutex_unlock(&cam->dev_mutex);
+
+	if (!cam->users)
+		kfree(cam);
+
+	up_write(&sn9c102_disconnect);
+}
+
+
+static struct usb_driver sn9c102_usb_driver = {
+	.name =       "sn9c102",
+	.id_table =   sn9c102_id_table,
+	.probe =      sn9c102_usb_probe,
+	.disconnect = sn9c102_usb_disconnect,
+};
+
+/*****************************************************************************/
+
+static int __init sn9c102_module_init(void)
+{
+	int err = 0;
+
+	KDBG(2, SN9C102_MODULE_NAME " v" SN9C102_MODULE_VERSION);
+	KDBG(3, SN9C102_MODULE_AUTHOR);
+
+	if ((err = usb_register(&sn9c102_usb_driver)))
+		KDBG(1, "usb_register() failed");
+
+	return err;
+}
+
+
+static void __exit sn9c102_module_exit(void)
+{
+	usb_deregister(&sn9c102_usb_driver);
+}
+
+
+module_init(sn9c102_module_init);
+module_exit(sn9c102_module_exit);
diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131d.c b/drivers/media/video/sn9c102/sn9c102_hv7131d.c
new file mode 100644
index 000000000000..c4117bf64b69
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_hv7131d.c
@@ -0,0 +1,271 @@
+/***************************************************************************
+ * Plug-in for HV7131D image sensor connected to the SN9C10x PC Camera     *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor hv7131d;
+
+
+static int hv7131d_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x00, 0x10);
+	err += sn9c102_write_reg(cam, 0x00, 0x11);
+	err += sn9c102_write_reg(cam, 0x00, 0x14);
+	err += sn9c102_write_reg(cam, 0x60, 0x17);
+	err += sn9c102_write_reg(cam, 0x0e, 0x18);
+	err += sn9c102_write_reg(cam, 0xf2, 0x19);
+
+	err += sn9c102_i2c_write(cam, 0x01, 0x04);
+	err += sn9c102_i2c_write(cam, 0x02, 0x00);
+	err += sn9c102_i2c_write(cam, 0x28, 0x00);
+
+	return err;
+}
+
+
+static int hv7131d_get_ctrl(struct sn9c102_device* cam,
+			    struct v4l2_control* ctrl)
+{
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		{
+			int r1 = sn9c102_i2c_read(cam, 0x26),
+			    r2 = sn9c102_i2c_read(cam, 0x27);
+			if (r1 < 0 || r2 < 0)
+				return -EIO;
+			ctrl->value = (r1 << 8) | (r2 & 0xff);
+		}
+		return 0;
+	case V4L2_CID_RED_BALANCE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x31)) < 0)
+			return -EIO;
+		ctrl->value = 0x3f - (ctrl->value & 0x3f);
+		return 0;
+	case V4L2_CID_BLUE_BALANCE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x33)) < 0)
+			return -EIO;
+		ctrl->value = 0x3f - (ctrl->value & 0x3f);
+		return 0;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x32)) < 0)
+			return -EIO;
+		ctrl->value = 0x3f - (ctrl->value & 0x3f);
+		return 0;
+	case SN9C102_V4L2_CID_RESET_LEVEL:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x30)) < 0)
+			return -EIO;
+		ctrl->value &= 0x3f;
+		return 0;
+	case SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x34)) < 0)
+			return -EIO;
+		ctrl->value &= 0x07;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+
+static int hv7131d_set_ctrl(struct sn9c102_device* cam,
+			    const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		err += sn9c102_i2c_write(cam, 0x26, ctrl->value >> 8);
+		err += sn9c102_i2c_write(cam, 0x27, ctrl->value & 0xff);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x31, 0x3f - ctrl->value);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x33, 0x3f - ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x32, 0x3f - ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_RESET_LEVEL:
+		err += sn9c102_i2c_write(cam, 0x30, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE:
+		err += sn9c102_i2c_write(cam, 0x34, ctrl->value);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err ? -EIO : 0;
+}
+
+
+static int hv7131d_set_crop(struct sn9c102_device* cam,
+			    const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &hv7131d;
+	int err = 0;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 2,
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 2;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	return err;
+}
+
+
+static int hv7131d_set_pix_format(struct sn9c102_device* cam,
+				  const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x42, 0x19);
+	else
+		err += sn9c102_write_reg(cam, 0xf2, 0x19);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor hv7131d = {
+	.name = "HV7131D",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_2WIRES,
+	.i2c_slave_id = 0x11,
+	.init = &hv7131d_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x0250,
+			.maximum = 0xffff,
+			.step = 0x0001,
+			.default_value = 0x0250,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_RED_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "red balance",
+			.minimum = 0x00,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLUE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "blue balance",
+			.minimum = 0x00,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x20,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_GREEN_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "green balance",
+			.minimum = 0x00,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x1e,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_RESET_LEVEL,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "reset level",
+			.minimum = 0x19,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x30,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "pixel bias voltage",
+			.minimum = 0x00,
+			.maximum = 0x07,
+			.step = 0x01,
+			.default_value = 0x02,
+			.flags = 0,
+		},
+	},
+	.get_ctrl = &hv7131d_get_ctrl,
+	.set_ctrl = &hv7131d_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.set_crop = &hv7131d_set_crop,
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &hv7131d_set_pix_format
+};
+
+
+int sn9c102_probe_hv7131d(struct sn9c102_device* cam)
+{
+	int r0 = 0, r1 = 0, err = 0;
+
+	err += sn9c102_write_reg(cam, 0x01, 0x01);
+	err += sn9c102_write_reg(cam, 0x00, 0x01);
+	err += sn9c102_write_reg(cam, 0x28, 0x17);
+	if (err)
+		return -EIO;
+
+	r0 = sn9c102_i2c_try_read(cam, &hv7131d, 0x00);
+	r1 = sn9c102_i2c_try_read(cam, &hv7131d, 0x01);
+	if (r0 < 0 || r1 < 0)
+		return -EIO;
+
+	if (r0 != 0x00 && r1 != 0x04)
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &hv7131d);
+
+	return 0;
+}
diff --git a/drivers/media/video/sn9c102/sn9c102_mi0343.c b/drivers/media/video/sn9c102/sn9c102_mi0343.c
new file mode 100644
index 000000000000..4169ea4a2e20
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_mi0343.c
@@ -0,0 +1,363 @@
+/***************************************************************************
+ * Plug-in for MI-0343 image sensor connected to the SN9C10x PC Camera     *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor mi0343;
+static u8 mi0343_i2c_data[5+1];
+
+
+static int mi0343_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x00, 0x10);
+	err += sn9c102_write_reg(cam, 0x00, 0x11);
+	err += sn9c102_write_reg(cam, 0x0a, 0x14);
+	err += sn9c102_write_reg(cam, 0x40, 0x01);
+	err += sn9c102_write_reg(cam, 0x20, 0x17);
+	err += sn9c102_write_reg(cam, 0x07, 0x18);
+	err += sn9c102_write_reg(cam, 0xa0, 0x19);
+
+	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
+					 0x0d, 0x00, 0x01, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
+					 0x0d, 0x00, 0x00, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
+					 0x03, 0x01, 0xe1, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
+					 0x04, 0x02, 0x81, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
+					 0x05, 0x00, 0x17, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
+					 0x06, 0x00, 0x11, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
+					 0x62, 0x04, 0x9a, 0, 0);
+
+	return err;
+}
+
+
+static int mi0343_get_ctrl(struct sn9c102_device* cam,
+			   struct v4l2_control* ctrl)
+{
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
+					     0x09, 2+1, mi0343_i2c_data) < 0)
+			return -EIO;
+		ctrl->value = mi0343_i2c_data[2];
+		return 0;
+	case V4L2_CID_GAIN:
+		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
+					     0x35, 2+1, mi0343_i2c_data) < 0)
+			return -EIO;
+		break;
+	case V4L2_CID_HFLIP:
+		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
+					     0x20, 2+1, mi0343_i2c_data) < 0)
+			return -EIO;
+		ctrl->value = mi0343_i2c_data[3] & 0x20 ? 1 : 0;
+		return 0;
+	case V4L2_CID_VFLIP:
+		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
+					     0x20, 2+1, mi0343_i2c_data) < 0)
+			return -EIO;
+		ctrl->value = mi0343_i2c_data[3] & 0x80 ? 1 : 0;
+		return 0;
+	case V4L2_CID_RED_BALANCE:
+		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
+					     0x2d, 2+1, mi0343_i2c_data) < 0)
+			return -EIO;
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
+					     0x2c, 2+1, mi0343_i2c_data) < 0)
+			return -EIO;
+		break;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
+					     0x2e, 2+1, mi0343_i2c_data) < 0)
+			return -EIO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+	case V4L2_CID_RED_BALANCE:
+	case V4L2_CID_BLUE_BALANCE:
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		ctrl->value = mi0343_i2c_data[3] | (mi0343_i2c_data[2] << 8);
+		if (ctrl->value >= 0x10 && ctrl->value <= 0x3f)
+			ctrl->value -= 0x10;
+		else if (ctrl->value >= 0x60 && ctrl->value <= 0x7f)
+			ctrl->value -= 0x60;
+		else if (ctrl->value >= 0xe0 && ctrl->value <= 0xff)
+			ctrl->value -= 0xe0;
+	}
+
+	return 0;
+}
+
+
+static int mi0343_set_ctrl(struct sn9c102_device* cam,
+			   const struct v4l2_control* ctrl)
+{
+	u16 reg = 0;
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+	case V4L2_CID_RED_BALANCE:
+	case V4L2_CID_BLUE_BALANCE:
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		if (ctrl->value <= (0x3f-0x10))
+			reg = 0x10 + ctrl->value;
+		else if (ctrl->value <= ((0x3f-0x10) + (0x7f-0x60)))
+			reg = 0x60 + (ctrl->value - (0x3f-0x10));
+		else
+			reg = 0xe0 + (ctrl->value - (0x3f-0x10) - (0x7f-0x60));
+		break;
+	}
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x09, ctrl->value, 0x00,
+						 0, 0);
+		break;
+	case V4L2_CID_GAIN:
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x35, reg >> 8, reg & 0xff,
+						 0, 0);
+		break;
+	case V4L2_CID_HFLIP:
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x20, ctrl->value ? 0x40:0x00,
+						 ctrl->value ? 0x20:0x00,
+						 0, 0);
+		break;
+	case V4L2_CID_VFLIP:
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x20, ctrl->value ? 0x80:0x00,
+						 ctrl->value ? 0x80:0x00,
+						 0, 0);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x2d, reg >> 8, reg & 0xff,
+						 0, 0);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x2c, reg >> 8, reg & 0xff,
+						 0, 0);
+		break;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x2b, reg >> 8, reg & 0xff,
+						 0, 0);
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x2e, reg >> 8, reg & 0xff,
+						 0, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err ? -EIO : 0;
+}
+
+
+static int mi0343_set_crop(struct sn9c102_device* cam,
+			    const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &mi0343;
+	int err = 0;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 0,
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 2;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	return err;
+}
+
+
+static int mi0343_set_pix_format(struct sn9c102_device* cam,
+				 const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) {
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x0a, 0x00, 0x03, 0, 0);
+		err += sn9c102_write_reg(cam, 0x20, 0x19);
+	} else {
+		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
+						 mi0343.i2c_slave_id,
+						 0x0a, 0x00, 0x05, 0, 0);
+		err += sn9c102_write_reg(cam, 0xa0, 0x19);
+	}
+
+	return err;
+}
+
+
+static struct sn9c102_sensor mi0343 = {
+	.name = "MI-0343",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.frequency = SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_2WIRES,
+	.i2c_slave_id = 0x5d,
+	.init = &mi0343_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x06,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = (0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0),/*0x6d*/
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_HFLIP,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "horizontal mirror",
+			.minimum = 0,
+			.maximum = 1,
+			.step = 1,
+			.default_value = 0,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_VFLIP,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "vertical mirror",
+			.minimum = 0,
+			.maximum = 1,
+			.step = 1,
+			.default_value = 0,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_RED_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "red balance",
+			.minimum = 0x00,
+			.maximum = (0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0),
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLUE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "blue balance",
+			.minimum = 0x00,
+			.maximum = (0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0),
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_GREEN_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "green balance",
+			.minimum = 0x00,
+			.maximum = ((0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0)),
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+	},
+	.get_ctrl = &mi0343_get_ctrl,
+	.set_ctrl = &mi0343_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.set_crop = &mi0343_set_crop,
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &mi0343_set_pix_format
+};
+
+
+int sn9c102_probe_mi0343(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x01, 0x01);
+	err += sn9c102_write_reg(cam, 0x00, 0x01);
+	err += sn9c102_write_reg(cam, 0x28, 0x17);
+	if (err)
+		return -EIO;
+
+	if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, 0x00,
+				     2, mi0343_i2c_data) < 0)
+		return -EIO;
+
+	if (mi0343_i2c_data[4] != 0x32 && mi0343_i2c_data[3] != 0xe3)
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &mi0343);
+
+	return 0;
+}
diff --git a/drivers/media/video/sn9c102/sn9c102_ov7630.c b/drivers/media/video/sn9c102/sn9c102_ov7630.c
new file mode 100644
index 000000000000..3da042021787
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_ov7630.c
@@ -0,0 +1,401 @@
+/***************************************************************************
+ * Plug-in for OV7630 image sensor connected to the SN9C10x PC Camera      *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2005-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor ov7630;
+
+
+static int ov7630_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x00, 0x14);
+	err += sn9c102_write_reg(cam, 0x60, 0x17);
+	err += sn9c102_write_reg(cam, 0x0f, 0x18);
+	err += sn9c102_write_reg(cam, 0x50, 0x19);
+
+	err += sn9c102_i2c_write(cam, 0x12, 0x80);
+	err += sn9c102_i2c_write(cam, 0x11, 0x01);
+	err += sn9c102_i2c_write(cam, 0x15, 0x34);
+	err += sn9c102_i2c_write(cam, 0x16, 0x03);
+	err += sn9c102_i2c_write(cam, 0x17, 0x1c);
+	err += sn9c102_i2c_write(cam, 0x18, 0xbd);
+	err += sn9c102_i2c_write(cam, 0x19, 0x06);
+	err += sn9c102_i2c_write(cam, 0x1a, 0xf6);
+	err += sn9c102_i2c_write(cam, 0x1b, 0x04);
+	err += sn9c102_i2c_write(cam, 0x20, 0xf6);
+	err += sn9c102_i2c_write(cam, 0x23, 0xee);
+	err += sn9c102_i2c_write(cam, 0x26, 0xa0);
+	err += sn9c102_i2c_write(cam, 0x27, 0x9a);
+	err += sn9c102_i2c_write(cam, 0x28, 0xa0);
+	err += sn9c102_i2c_write(cam, 0x29, 0x30);
+	err += sn9c102_i2c_write(cam, 0x2a, 0xa0);
+	err += sn9c102_i2c_write(cam, 0x2b, 0x1f);
+	err += sn9c102_i2c_write(cam, 0x2f, 0x3d);
+	err += sn9c102_i2c_write(cam, 0x30, 0x24);
+	err += sn9c102_i2c_write(cam, 0x32, 0x86);
+	err += sn9c102_i2c_write(cam, 0x60, 0xa9);
+	err += sn9c102_i2c_write(cam, 0x61, 0x42);
+	err += sn9c102_i2c_write(cam, 0x65, 0x00);
+	err += sn9c102_i2c_write(cam, 0x69, 0x38);
+	err += sn9c102_i2c_write(cam, 0x6f, 0x88);
+	err += sn9c102_i2c_write(cam, 0x70, 0x0b);
+	err += sn9c102_i2c_write(cam, 0x71, 0x00);
+	err += sn9c102_i2c_write(cam, 0x74, 0x21);
+	err += sn9c102_i2c_write(cam, 0x7d, 0xf7);
+
+	return err;
+}
+
+
+static int ov7630_set_ctrl(struct sn9c102_device* cam,
+			   const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		err += sn9c102_i2c_write(cam, 0x10, ctrl->value >> 2);
+		err += sn9c102_i2c_write(cam, 0x76, ctrl->value & 0x03);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x02, ctrl->value);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x01, ctrl->value);
+		break;
+	case V4L2_CID_GAIN:
+		err += sn9c102_i2c_write(cam, 0x00, ctrl->value);
+		break;
+	case V4L2_CID_CONTRAST:
+		err += ctrl->value ? sn9c102_i2c_write(cam, 0x05,
+						       (ctrl->value-1) | 0x20)
+				   : sn9c102_i2c_write(cam, 0x05, 0x00);
+		break;
+	case V4L2_CID_BRIGHTNESS:
+		err += sn9c102_i2c_write(cam, 0x06, ctrl->value);
+		break;
+	case V4L2_CID_SATURATION:
+		err += sn9c102_i2c_write(cam, 0x03, ctrl->value << 4);
+		break;
+	case V4L2_CID_HUE:
+		err += ctrl->value ? sn9c102_i2c_write(cam, 0x04,
+						       (ctrl->value-1) | 0x20)
+				   : sn9c102_i2c_write(cam, 0x04, 0x00);
+		break;
+	case V4L2_CID_DO_WHITE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
+		break;
+	case V4L2_CID_WHITENESS:
+		err += sn9c102_i2c_write(cam, 0x0d, ctrl->value);
+		break;
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x78);
+		break;
+	case V4L2_CID_AUTOGAIN:
+		err += sn9c102_i2c_write(cam, 0x13, ctrl->value);
+		break;
+	case V4L2_CID_VFLIP:
+		err += sn9c102_i2c_write(cam, 0x75, 0x0e | (ctrl->value << 7));
+		break;
+	case V4L2_CID_BLACK_LEVEL:
+		err += sn9c102_i2c_write(cam, 0x25, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_BRIGHT_LEVEL:
+		err += sn9c102_i2c_write(cam, 0x24, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_GAMMA:
+		err += sn9c102_i2c_write(cam, 0x14, (ctrl->value << 2) | 0x80);
+		break;
+	case SN9C102_V4L2_CID_BAND_FILTER:
+		err += sn9c102_i2c_write(cam, 0x2d, ctrl->value << 2);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err ? -EIO : 0;
+}
+
+
+static int ov7630_set_crop(struct sn9c102_device* cam,
+			   const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &ov7630;
+	int err = 0;
+	u8 v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1;
+
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	return err;
+}
+
+
+static int ov7630_set_pix_format(struct sn9c102_device* cam,
+				 const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x20, 0x19);
+	else
+		err += sn9c102_write_reg(cam, 0x50, 0x19);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor ov7630 = {
+	.name = "OV7630",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.sysfs_ops = SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_2WIRES,
+	.i2c_slave_id = 0x21,
+	.init = &ov7630_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x14,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_HUE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "hue",
+			.minimum = 0x00,
+			.maximum = 0x1f+1,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_SATURATION,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "saturation",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x08,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_CONTRAST,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "contrast",
+			.minimum = 0x00,
+			.maximum = 0x1f+1,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x000,
+			.maximum = 0x3ff,
+			.step = 0x001,
+			.default_value = 0x83<<2,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_RED_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "red balance",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0x3a,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLUE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "blue balance",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0x77,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BRIGHTNESS,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "brightness",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0xa0,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_DO_WHITE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "white balance background: blue",
+			.minimum = 0x00,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x20,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_WHITENESS,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "white balance background: red",
+			.minimum = 0x00,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x20,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_AUTO_WHITE_BALANCE,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "auto white balance",
+			.minimum = 0x00,
+			.maximum = 0x01,
+			.step = 0x01,
+			.default_value = 0x01,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_AUTOGAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "gain & exposure mode",
+			.minimum = 0x00,
+			.maximum = 0x03,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_VFLIP,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "vertical flip",
+			.minimum = 0x00,
+			.maximum = 0x01,
+			.step = 0x01,
+			.default_value = 0x01,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLACK_LEVEL,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "black pixel ratio",
+			.minimum = 0x01,
+			.maximum = 0x9a,
+			.step = 0x01,
+			.default_value = 0x8a,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_BRIGHT_LEVEL,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "bright pixel ratio",
+			.minimum = 0x01,
+			.maximum = 0x9a,
+			.step = 0x01,
+			.default_value = 0x10,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_BAND_FILTER,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "band filter",
+			.minimum = 0x00,
+			.maximum = 0x01,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_GAMMA,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "rgb gamma",
+			.minimum = 0x00,
+			.maximum = 0x01,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+	},
+	.set_ctrl = &ov7630_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.set_crop = &ov7630_set_crop,
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &ov7630_set_pix_format
+};
+
+
+int sn9c102_probe_ov7630(struct sn9c102_device* cam)
+{
+	const struct usb_device_id ov7630_id_table[] = {
+		{ USB_DEVICE(0x0c45, 0x602c), },
+		{ USB_DEVICE(0x0c45, 0x602d), },
+		{ USB_DEVICE(0x0c45, 0x608f), },
+		{ USB_DEVICE(0x0c45, 0x60b0), },
+		{ }
+	};
+	int err = 0;
+
+	if (!sn9c102_match_id(cam, ov7630_id_table))
+		return -ENODEV;
+
+	err += sn9c102_write_reg(cam, 0x01, 0x01);
+	err += sn9c102_write_reg(cam, 0x00, 0x01);
+	err += sn9c102_write_reg(cam, 0x28, 0x17);
+	if (err)
+		return -EIO;
+
+	err += sn9c102_i2c_try_write(cam, &ov7630, 0x0b, 0);
+	if (err)
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &ov7630);
+
+	return 0;
+}
diff --git a/drivers/media/video/sn9c102/sn9c102_pas106b.c b/drivers/media/video/sn9c102/sn9c102_pas106b.c
new file mode 100644
index 000000000000..9915944235e8
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_pas106b.c
@@ -0,0 +1,307 @@
+/***************************************************************************
+ * Plug-in for PAS106B image sensor connected to the SN9C10x PC Camera     *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include <linux/delay.h>
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor pas106b;
+
+
+static int pas106b_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x00, 0x10);
+	err += sn9c102_write_reg(cam, 0x00, 0x11);
+	err += sn9c102_write_reg(cam, 0x00, 0x14);
+	err += sn9c102_write_reg(cam, 0x20, 0x17);
+	err += sn9c102_write_reg(cam, 0x20, 0x19);
+	err += sn9c102_write_reg(cam, 0x09, 0x18);
+
+	err += sn9c102_i2c_write(cam, 0x02, 0x0c);
+	err += sn9c102_i2c_write(cam, 0x05, 0x5a);
+	err += sn9c102_i2c_write(cam, 0x06, 0x88);
+	err += sn9c102_i2c_write(cam, 0x07, 0x80);
+	err += sn9c102_i2c_write(cam, 0x10, 0x06);
+	err += sn9c102_i2c_write(cam, 0x11, 0x06);
+	err += sn9c102_i2c_write(cam, 0x12, 0x00);
+	err += sn9c102_i2c_write(cam, 0x14, 0x02);
+	err += sn9c102_i2c_write(cam, 0x13, 0x01);
+
+	msleep(400);
+
+	return err;
+}
+
+
+static int pas106b_get_ctrl(struct sn9c102_device* cam,
+			    struct v4l2_control* ctrl)
+{
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		{
+			int r1 = sn9c102_i2c_read(cam, 0x03),
+			    r2 = sn9c102_i2c_read(cam, 0x04);
+			if (r1 < 0 || r2 < 0)
+				return -EIO;
+			ctrl->value = (r1 << 4) | (r2 & 0x0f);
+		}
+		return 0;
+	case V4L2_CID_RED_BALANCE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x0c)) < 0)
+			return -EIO;
+		ctrl->value &= 0x1f;
+		return 0;
+	case V4L2_CID_BLUE_BALANCE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x09)) < 0)
+			return -EIO;
+		ctrl->value &= 0x1f;
+		return 0;
+	case V4L2_CID_GAIN:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x0e)) < 0)
+			return -EIO;
+		ctrl->value &= 0x1f;
+		return 0;
+	case V4L2_CID_CONTRAST:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x0f)) < 0)
+			return -EIO;
+		ctrl->value &= 0x07;
+		return 0;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x0a)) < 0)
+			return -EIO;
+		ctrl->value = (ctrl->value & 0x1f) << 1;
+		return 0;
+	case SN9C102_V4L2_CID_DAC_MAGNITUDE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x08)) < 0)
+			return -EIO;
+		ctrl->value &= 0xf8;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+
+static int pas106b_set_ctrl(struct sn9c102_device* cam,
+			    const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		err += sn9c102_i2c_write(cam, 0x03, ctrl->value >> 4);
+		err += sn9c102_i2c_write(cam, 0x04, ctrl->value & 0x0f);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x09, ctrl->value);
+		break;
+	case V4L2_CID_GAIN:
+		err += sn9c102_i2c_write(cam, 0x0e, ctrl->value);
+		break;
+	case V4L2_CID_CONTRAST:
+		err += sn9c102_i2c_write(cam, 0x0f, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x0a, ctrl->value >> 1);
+		err += sn9c102_i2c_write(cam, 0x0b, ctrl->value >> 1);
+		break;
+	case SN9C102_V4L2_CID_DAC_MAGNITUDE:
+		err += sn9c102_i2c_write(cam, 0x08, ctrl->value << 3);
+		break;
+	default:
+		return -EINVAL;
+	}
+	err += sn9c102_i2c_write(cam, 0x13, 0x01);
+
+	return err ? -EIO : 0;
+}
+
+
+static int pas106b_set_crop(struct sn9c102_device* cam,
+			    const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &pas106b;
+	int err = 0;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4,
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	return err;
+}
+
+
+static int pas106b_set_pix_format(struct sn9c102_device* cam,
+				  const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x2c, 0x17);
+	else
+		err += sn9c102_write_reg(cam, 0x20, 0x17);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor pas106b = {
+	.name = "PAS106B",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_2WIRES,
+	.i2c_slave_id = 0x40,
+	.init = &pas106b_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x125,
+			.maximum = 0xfff,
+			.step = 0x001,
+			.default_value = 0x140,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0x1f,
+			.step = 0x01,
+			.default_value = 0x0d,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_CONTRAST,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "contrast",
+			.minimum = 0x00,
+			.maximum = 0x07,
+			.step = 0x01,
+			.default_value = 0x00, /* 0x00~0x03 have same effect */
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_RED_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "red balance",
+			.minimum = 0x00,
+			.maximum = 0x1f,
+			.step = 0x01,
+			.default_value = 0x04,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLUE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "blue balance",
+			.minimum = 0x00,
+			.maximum = 0x1f,
+			.step = 0x01,
+			.default_value = 0x06,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_GREEN_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "green balance",
+			.minimum = 0x00,
+			.maximum = 0x3e,
+			.step = 0x02,
+			.default_value = 0x02,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_DAC_MAGNITUDE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "DAC magnitude",
+			.minimum = 0x00,
+			.maximum = 0x1f,
+			.step = 0x01,
+			.default_value = 0x01,
+			.flags = 0,
+		},
+	},
+	.get_ctrl = &pas106b_get_ctrl,
+	.set_ctrl = &pas106b_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 352,
+			.height = 288,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 352,
+			.height = 288,
+		},
+	},
+	.set_crop = &pas106b_set_crop,
+	.pix_format = {
+		.width = 352,
+		.height = 288,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8, /* we use this field as 'bits per pixel' */
+	},
+	.set_pix_format = &pas106b_set_pix_format
+};
+
+
+int sn9c102_probe_pas106b(struct sn9c102_device* cam)
+{
+	int r0 = 0, r1 = 0, err = 0;
+	unsigned int pid = 0;
+
+	/*
+	   Minimal initialization to enable the I2C communication
+	   NOTE: do NOT change the values!
+	*/
+	err += sn9c102_write_reg(cam, 0x01, 0x01); /* sensor power down */
+	err += sn9c102_write_reg(cam, 0x00, 0x01); /* sensor power on */
+	err += sn9c102_write_reg(cam, 0x28, 0x17); /* sensor clock at 24 MHz */
+	if (err)
+		return -EIO;
+
+	r0 = sn9c102_i2c_try_read(cam, &pas106b, 0x00);
+	r1 = sn9c102_i2c_try_read(cam, &pas106b, 0x01);
+
+	if (r0 < 0 || r1 < 0)
+		return -EIO;
+
+	pid = (r0 << 11) | ((r1 & 0xf0) >> 4);
+	if (pid != 0x007)
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &pas106b);
+
+	return 0;
+}
diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bca.c b/drivers/media/video/sn9c102/sn9c102_pas202bca.c
new file mode 100644
index 000000000000..c8f1ae2152b8
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_pas202bca.c
@@ -0,0 +1,238 @@
+/***************************************************************************
+ * Plug-in for PAS202BCA image sensor connected to the SN9C10x PC Camera   *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include <linux/delay.h>
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor pas202bca;
+
+
+static int pas202bca_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x00, 0x10);
+	err += sn9c102_write_reg(cam, 0x00, 0x11);
+	err += sn9c102_write_reg(cam, 0x00, 0x14);
+	err += sn9c102_write_reg(cam, 0x20, 0x17);
+	err += sn9c102_write_reg(cam, 0x30, 0x19);
+	err += sn9c102_write_reg(cam, 0x09, 0x18);
+
+	err += sn9c102_i2c_write(cam, 0x02, 0x14);
+	err += sn9c102_i2c_write(cam, 0x03, 0x40);
+	err += sn9c102_i2c_write(cam, 0x0d, 0x2c);
+	err += sn9c102_i2c_write(cam, 0x0e, 0x01);
+	err += sn9c102_i2c_write(cam, 0x0f, 0xa9);
+	err += sn9c102_i2c_write(cam, 0x10, 0x08);
+	err += sn9c102_i2c_write(cam, 0x13, 0x63);
+	err += sn9c102_i2c_write(cam, 0x15, 0x70);
+	err += sn9c102_i2c_write(cam, 0x11, 0x01);
+
+	msleep(400);
+
+	return err;
+}
+
+
+static int pas202bca_set_pix_format(struct sn9c102_device* cam,
+				    const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x24, 0x17);
+	else
+		err += sn9c102_write_reg(cam, 0x20, 0x17);
+
+	return err;
+}
+
+
+static int pas202bca_set_ctrl(struct sn9c102_device* cam,
+			      const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		err += sn9c102_i2c_write(cam, 0x04, ctrl->value >> 6);
+		err += sn9c102_i2c_write(cam, 0x05, ctrl->value & 0x3f);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x09, ctrl->value);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x07, ctrl->value);
+		break;
+	case V4L2_CID_GAIN:
+		err += sn9c102_i2c_write(cam, 0x10, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x08, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_DAC_MAGNITUDE:
+		err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
+		break;
+	default:
+		return -EINVAL;
+	}
+	err += sn9c102_i2c_write(cam, 0x11, 0x01);
+
+	return err ? -EIO : 0;
+}
+
+
+static int pas202bca_set_crop(struct sn9c102_device* cam,
+			      const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &pas202bca;
+	int err = 0;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 3,
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor pas202bca = {
+	.name = "PAS202BCA",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_2WIRES,
+	.i2c_slave_id = 0x40,
+	.init = &pas202bca_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x01e5,
+			.maximum = 0x3fff,
+			.step = 0x0001,
+			.default_value = 0x01e5,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0x1f,
+			.step = 0x01,
+			.default_value = 0x0c,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_RED_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "red balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x01,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLUE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "blue balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x05,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_GREEN_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "green balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_DAC_MAGNITUDE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "DAC magnitude",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0x04,
+			.flags = 0,
+		},
+	},
+	.set_ctrl = &pas202bca_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.set_crop = &pas202bca_set_crop,
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &pas202bca_set_pix_format
+};
+
+
+int sn9c102_probe_pas202bca(struct sn9c102_device* cam)
+{
+	const struct usb_device_id pas202bca_id_table[] = {
+		{ USB_DEVICE(0x0c45, 0x60af), },
+		{ }
+	};
+	int err = 0;
+
+	if (!sn9c102_match_id(cam,pas202bca_id_table))
+		return -ENODEV;
+
+	err += sn9c102_write_reg(cam, 0x01, 0x01);
+	err += sn9c102_write_reg(cam, 0x40, 0x01);
+	err += sn9c102_write_reg(cam, 0x28, 0x17);
+	if (err)
+		return -EIO;
+
+	if (sn9c102_i2c_try_write(cam, &pas202bca, 0x10, 0)) /* try to write */
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &pas202bca);
+
+	return 0;
+}
diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
new file mode 100644
index 000000000000..e3c1178e339c
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
@@ -0,0 +1,293 @@
+/***************************************************************************
+ * Plug-in for PAS202BCB image sensor connected to the SN9C10x PC Camera   *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio                  *
+ *                       <medaglia@undl.org.br>                            *
+ *                       http://cadu.homelinux.com:8080/                   *
+ *                                                                         *
+ * DAC Magnitude, exposure and green gain controls added by                *
+ * Luca Risolia <luca.risolia@studio.unibo.it>                             *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include <linux/delay.h>
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor pas202bcb;
+
+
+static int pas202bcb_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x00, 0x10);
+	err += sn9c102_write_reg(cam, 0x00, 0x11);
+	err += sn9c102_write_reg(cam, 0x00, 0x14);
+	err += sn9c102_write_reg(cam, 0x20, 0x17);
+	err += sn9c102_write_reg(cam, 0x30, 0x19);
+	err += sn9c102_write_reg(cam, 0x09, 0x18);
+
+	err += sn9c102_i2c_write(cam, 0x02, 0x14);
+	err += sn9c102_i2c_write(cam, 0x03, 0x40);
+	err += sn9c102_i2c_write(cam, 0x0d, 0x2c);
+	err += sn9c102_i2c_write(cam, 0x0e, 0x01);
+	err += sn9c102_i2c_write(cam, 0x0f, 0xa9);
+	err += sn9c102_i2c_write(cam, 0x10, 0x08);
+	err += sn9c102_i2c_write(cam, 0x13, 0x63);
+	err += sn9c102_i2c_write(cam, 0x15, 0x70);
+	err += sn9c102_i2c_write(cam, 0x11, 0x01);
+
+	msleep(400);
+
+	return err;
+}
+
+
+static int pas202bcb_get_ctrl(struct sn9c102_device* cam,
+			      struct v4l2_control* ctrl)
+{
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		{
+			int r1 = sn9c102_i2c_read(cam, 0x04),
+			    r2 = sn9c102_i2c_read(cam, 0x05);
+			if (r1 < 0 || r2 < 0)
+				return -EIO;
+			ctrl->value = (r1 << 6) | (r2 & 0x3f);
+		}
+		return 0;
+	case V4L2_CID_RED_BALANCE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x09)) < 0)
+			return -EIO;
+		ctrl->value &= 0x0f;
+		return 0;
+	case V4L2_CID_BLUE_BALANCE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x07)) < 0)
+			return -EIO;
+		ctrl->value &= 0x0f;
+		return 0;
+	case V4L2_CID_GAIN:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x10)) < 0)
+			return -EIO;
+		ctrl->value &= 0x1f;
+		return 0;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x08)) < 0)
+			return -EIO;
+		ctrl->value &= 0x0f;
+		return 0;
+	case SN9C102_V4L2_CID_DAC_MAGNITUDE:
+		if ((ctrl->value = sn9c102_i2c_read(cam, 0x0c)) < 0)
+			return -EIO;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+
+static int pas202bcb_set_pix_format(struct sn9c102_device* cam,
+				    const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x24, 0x17);
+	else
+		err += sn9c102_write_reg(cam, 0x20, 0x17);
+
+	return err;
+}
+
+
+static int pas202bcb_set_ctrl(struct sn9c102_device* cam,
+			      const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		err += sn9c102_i2c_write(cam, 0x04, ctrl->value >> 6);
+		err += sn9c102_i2c_write(cam, 0x05, ctrl->value & 0x3f);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x09, ctrl->value);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x07, ctrl->value);
+		break;
+	case V4L2_CID_GAIN:
+		err += sn9c102_i2c_write(cam, 0x10, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x08, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_DAC_MAGNITUDE:
+		err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
+		break;
+	default:
+		return -EINVAL;
+	}
+	err += sn9c102_i2c_write(cam, 0x11, 0x01);
+
+	return err ? -EIO : 0;
+}
+
+
+static int pas202bcb_set_crop(struct sn9c102_device* cam,
+			      const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &pas202bcb;
+	int err = 0;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4,
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor pas202bcb = {
+	.name = "PAS202BCB",
+	.maintainer = "Carlos Eduardo Medaglia Dyonisio "
+		      "<medaglia@undl.org.br>",
+	.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_2WIRES,
+	.i2c_slave_id = 0x40,
+	.init = &pas202bcb_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x01e5,
+			.maximum = 0x3fff,
+			.step = 0x0001,
+			.default_value = 0x01e5,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0x1f,
+			.step = 0x01,
+			.default_value = 0x0c,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_RED_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "red balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x01,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLUE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "blue balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x05,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_GREEN_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "green balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_DAC_MAGNITUDE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "DAC magnitude",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0x04,
+			.flags = 0,
+		},
+	},
+	.get_ctrl = &pas202bcb_get_ctrl,
+	.set_ctrl = &pas202bcb_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.set_crop = &pas202bcb_set_crop,
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &pas202bcb_set_pix_format
+};
+
+
+int sn9c102_probe_pas202bcb(struct sn9c102_device* cam)
+{
+	int r0 = 0, r1 = 0, err = 0;
+	unsigned int pid = 0;
+
+	/*
+	 *  Minimal initialization to enable the I2C communication
+	 *  NOTE: do NOT change the values!
+	 */
+	err += sn9c102_write_reg(cam, 0x01, 0x01); /* sensor power down */
+	err += sn9c102_write_reg(cam, 0x40, 0x01); /* sensor power on */
+	err += sn9c102_write_reg(cam, 0x28, 0x17); /* sensor clock at 24 MHz */
+	if (err)
+		return -EIO;
+
+	r0 = sn9c102_i2c_try_read(cam, &pas202bcb, 0x00);
+	r1 = sn9c102_i2c_try_read(cam, &pas202bcb, 0x01);
+
+	if (r0 < 0 || r1 < 0)
+		return -EIO;
+
+	pid = (r0 << 4) | ((r1 & 0xf0) >> 4);
+	if (pid != 0x017)
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &pas202bcb);
+
+	return 0;
+}
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
new file mode 100644
index 000000000000..2a874ee6f9f5
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -0,0 +1,389 @@
+/***************************************************************************
+ * API for image sensors connected to the SN9C10x PC Camera Controllers    *
+ *                                                                         *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _SN9C102_SENSOR_H_
+#define _SN9C102_SENSOR_H_
+
+#include <linux/usb.h>
+#include <linux/videodev.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <asm/types.h>
+
+struct sn9c102_device;
+struct sn9c102_sensor;
+
+/*****************************************************************************/
+
+/*
+   OVERVIEW.
+   This is a small interface that allows you to add support for any CCD/CMOS
+   image sensors connected to the SN9C10X bridges. The entire API is documented
+   below. In the most general case, to support a sensor there are three steps
+   you have to follow:
+   1) define the main "sn9c102_sensor" structure by setting the basic fields;
+   2) write a probing function to be called by the core module when the USB
+      camera is recognized, then add both the USB ids and the name of that
+      function to the two corresponding tables SENSOR_TABLE and ID_TABLE (see
+      below);
+   3) implement the methods that you want/need (and fill the rest of the main
+      structure accordingly).
+   "sn9c102_pas106b.c" is an example of all this stuff. Remember that you do
+   NOT need to touch the source code of the core module for the things to work
+   properly, unless you find bugs or flaws in it. Finally, do not forget to
+   read the V4L2 API for completeness.
+*/
+
+/*****************************************************************************/
+
+/*
+   Probing functions: on success, you must attach the sensor to the camera
+   by calling sn9c102_attach_sensor() provided below.
+   To enable the I2C communication, you might need to perform a really basic
+   initialization of the SN9C10X chip by using the write function declared
+   ahead.
+   Functions must return 0 on success, the appropriate error otherwise.
+*/
+extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
+extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
+extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
+extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
+extern int sn9c102_probe_pas202bca(struct sn9c102_device* cam);
+extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
+extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
+extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
+
+/*
+   Add the above entries to this table. Be sure to add the entry in the right
+   place, since, on failure, the next probing routine is called according to
+   the order of the list below, from top to bottom.
+*/
+#define SN9C102_SENSOR_TABLE                                                  \
+static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = {              \
+	&sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */     \
+	&sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */    \
+	&sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */  \
+	&sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */    \
+	&sn9c102_probe_pas202bca, /* detection mostly based on USB pid/vid */ \
+	&sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */    \
+	&sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */       \
+	&sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */       \
+	NULL,                                                                 \
+};
+
+/* Device identification */
+extern struct sn9c102_device*
+sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id);
+
+/* Attach a probed sensor to the camera. */
+extern void
+sn9c102_attach_sensor(struct sn9c102_device* cam,
+		      struct sn9c102_sensor* sensor);
+
+/*
+   Each SN9C10x camera has proper PID/VID identifiers.
+   SN9C103 supports multiple interfaces, but we only handle the video class
+   interface.
+*/
+#define SN9C102_USB_DEVICE(vend, prod, intclass)                              \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |                           \
+		       USB_DEVICE_ID_MATCH_INT_CLASS,                         \
+	.idVendor = (vend),                                                   \
+	.idProduct = (prod),                                                  \
+	.bInterfaceClass = (intclass)
+
+#define SN9C102_ID_TABLE                                                      \
+static const struct usb_device_id sn9c102_id_table[] = {                      \
+	{ USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */                     \
+	{ USB_DEVICE(0x0c45, 0x6005), }, /* TAS5110C1B */                     \
+	{ USB_DEVICE(0x0c45, 0x6007), },                                      \
+	{ USB_DEVICE(0x0c45, 0x6009), }, /* PAS106B */                        \
+	{ USB_DEVICE(0x0c45, 0x600d), }, /* PAS106B */                        \
+	{ USB_DEVICE(0x0c45, 0x6024), },                                      \
+	{ USB_DEVICE(0x0c45, 0x6025), }, /* TAS5130D1B and TAS5110C1B */      \
+	{ USB_DEVICE(0x0c45, 0x6028), }, /* PAS202BCB */                      \
+	{ USB_DEVICE(0x0c45, 0x6029), }, /* PAS106B */                        \
+	{ USB_DEVICE(0x0c45, 0x602a), }, /* HV7131D */                        \
+	{ USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */                        \
+	{ USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */                         \
+	{ USB_DEVICE(0x0c45, 0x602d), },                                      \
+	{ USB_DEVICE(0x0c45, 0x602e), }, /* OV7630 */                         \
+	{ USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */                          \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6080, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6082, 0xff), }, /* MI0343 & MI0360 */  \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6083, 0xff), }, /* HV7131[D|E1] */     \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131/R */         \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */         \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */           \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60a2, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60a3, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60a8, 0xff), }, /* PAS106B */          \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60aa, 0xff), }, /* TAS5130D1B */       \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60ab, 0xff), }, /* TAS5110C1B */       \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60ac, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60ae, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60af, 0xff), }, /* PAS202BCB */        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60b0, 0xff), }, /* OV7630 (?) */       \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60b2, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60b3, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60b8, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60ba, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60bb, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60bc, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60be, 0xff), },                        \
+	{ }                                                                   \
+};
+
+/*****************************************************************************/
+
+/*
+   Read/write routines: they always return -1 on error, 0 or the read value
+   otherwise. NOTE that a real read operation is not supported by the SN9C10X
+   chip for some of its registers. To work around this problem, a pseudo-read
+   call is provided instead: it returns the last successfully written value
+   on the register (0 if it has never been written), the usual -1 on error.
+*/
+
+/* The "try" I2C I/O versions are used when probing the sensor */
+extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*,
+				 u8 address, u8 value);
+extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*,
+				u8 address);
+
+/*
+   These must be used if and only if the sensor doesn't implement the standard
+   I2C protocol. There are a number of good reasons why you must use the
+   single-byte versions of these functions: do not abuse. The first function
+   writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C10X
+   chip. The second one programs the registers 0x09 and 0x10 with data0 and
+   data1, and places the n bytes read from the sensor register table in the
+   buffer pointed by 'buffer'. Both the functions return -1 on error; the write
+   version returns 0 on success, while the read version returns the first read
+   byte.
+*/
+extern int sn9c102_i2c_try_raw_write(struct sn9c102_device* cam,
+				     struct sn9c102_sensor* sensor, u8 n,
+				     u8 data0, u8 data1, u8 data2, u8 data3,
+				     u8 data4, u8 data5);
+extern int sn9c102_i2c_try_raw_read(struct sn9c102_device* cam,
+				    struct sn9c102_sensor* sensor, u8 data0,
+				    u8 data1, u8 n, u8 buffer[]);
+
+/* To be used after the sensor struct has been attached to the camera struct */
+extern int sn9c102_i2c_write(struct sn9c102_device*, u8 address, u8 value);
+extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address);
+
+/* I/O on registers in the bridge. Could be used by the sensor methods too */
+extern int sn9c102_write_regs(struct sn9c102_device*, u8* buff, u16 index);
+extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index);
+extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index);
+
+/*
+   NOTE: there are no exported debugging functions. To uniform the output you
+   must use the dev_info()/dev_warn()/dev_err() macros defined in device.h,
+   already included here, the argument being the struct device '&usbdev->dev'
+   of the sensor structure. Do NOT use these macros before the sensor is
+   attached or the kernel will crash! However, you should not need to notify
+   the user about common errors or other messages, since this is done by the
+   master module.
+*/
+
+/*****************************************************************************/
+
+enum sn9c102_i2c_sysfs_ops {
+	SN9C102_I2C_READ = 0x01,
+	SN9C102_I2C_WRITE = 0x02,
+};
+
+enum sn9c102_i2c_frequency { /* sensors may support both the frequencies */
+	SN9C102_I2C_100KHZ = 0x01,
+	SN9C102_I2C_400KHZ = 0x02,
+};
+
+enum sn9c102_i2c_interface {
+	SN9C102_I2C_2WIRES,
+	SN9C102_I2C_3WIRES,
+};
+
+#define SN9C102_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
+
+struct sn9c102_sensor {
+	char name[32], /* sensor name */
+	     maintainer[64]; /* name of the mantainer <email> */
+
+	/* Supported operations through the 'sysfs' interface */
+	enum sn9c102_i2c_sysfs_ops sysfs_ops;
+
+	/*
+	   These sensor capabilities must be provided if the SN9C10X controller
+	   needs to communicate through the sensor serial interface by using
+	   at least one of the i2c functions available.
+	*/
+	enum sn9c102_i2c_frequency frequency;
+	enum sn9c102_i2c_interface interface;
+
+	/*
+	   This identifier must be provided if the image sensor implements
+	   the standard I2C protocol.
+	*/
+	u8 i2c_slave_id; /* reg. 0x09 */
+
+	/*
+	   NOTE: Where not noted,most of the functions below are not mandatory.
+		 Set to null if you do not implement them. If implemented,
+		 they must return 0 on success, the proper error otherwise.
+	*/
+
+	int (*init)(struct sn9c102_device* cam);
+	/*
+	   This function will be called after the sensor has been attached.
+	   It should be used to initialize the sensor only, but may also
+	   configure part of the SN9C10X chip if necessary. You don't need to
+	   setup picture settings like brightness, contrast, etc.. here, if
+	   the corrisponding controls are implemented (see below), since
+	   they are adjusted in the core driver by calling the set_ctrl()
+	   method after init(), where the arguments are the default values
+	   specified in the v4l2_queryctrl list of supported controls;
+	   Same suggestions apply for other settings, _if_ the corresponding
+	   methods are present; if not, the initialization must configure the
+	   sensor according to the default configuration structures below.
+	*/
+
+	struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS];
+	/*
+	   Optional list of default controls, defined as indicated in the
+	   V4L2 API. Menu type controls are not handled by this interface.
+	*/
+
+	int (*get_ctrl)(struct sn9c102_device* cam, struct v4l2_control* ctrl);
+	int (*set_ctrl)(struct sn9c102_device* cam,
+			const struct v4l2_control* ctrl);
+	/*
+	   You must implement at least the set_ctrl method if you have defined
+	   the list above. The returned value must follow the V4L2
+	   specifications for the VIDIOC_G|C_CTRL ioctls. V4L2_CID_H|VCENTER
+	   are not supported by this driver, so do not implement them. Also,
+	   you don't have to check whether the passed values are out of bounds,
+	   given that this is done by the core module.
+	*/
+
+	struct v4l2_cropcap cropcap;
+	/*
+	   Think the image sensor as a grid of R,G,B monochromatic pixels
+	   disposed according to a particular Bayer pattern, which describes
+	   the complete array of pixels, from (0,0) to (xmax, ymax). We will
+	   use this coordinate system from now on. It is assumed the sensor
+	   chip can be programmed to capture/transmit a subsection of that
+	   array of pixels: we will call this subsection "active window".
+	   It is not always true that the largest achievable active window can
+	   cover the whole array of pixels. The V4L2 API defines another
+	   area called "source rectangle", which, in turn, is a subrectangle of
+	   the active window. The SN9C10X chip is always programmed to read the
+	   source rectangle.
+	   The bounds of both the active window and the source rectangle are
+	   specified in the cropcap substructures 'bounds' and 'defrect'.
+	   By default, the source rectangle should cover the largest possible
+	   area. Again, it is not always true that the largest source rectangle
+	   can cover the entire active window, although it is a rare case for
+	   the hardware we have. The bounds of the source rectangle _must_ be
+	   multiple of 16 and must use the same coordinate system as indicated
+	   before; their centers shall align initially.
+	   If necessary, the sensor chip must be initialized during init() to
+	   set the bounds of the active sensor window; however, by default, it
+	   usually covers the largest achievable area (maxwidth x maxheight)
+	   of pixels, so no particular initialization is needed, if you have
+	   defined the correct default bounds in the structures.
+	   See the V4L2 API for further details.
+	   NOTE: once you have defined the bounds of the active window
+		 (struct cropcap.bounds) you must not change them.anymore.
+	   Only 'bounds' and 'defrect' fields are mandatory, other fields
+	   will be ignored.
+	*/
+
+	int (*set_crop)(struct sn9c102_device* cam,
+			const struct v4l2_rect* rect);
+	/*
+	   To be called on VIDIOC_C_SETCROP. The core module always calls a
+	   default routine which configures the appropriate SN9C10X regs (also
+	   scaling), but you may need to override/adjust specific stuff.
+	   'rect' contains width and height values that are multiple of 16: in
+	   case you override the default function, you always have to program
+	   the chip to match those values; on error return the corresponding
+	   error code without rolling back.
+	   NOTE: in case, you must program the SN9C10X chip to get rid of
+		 blank pixels or blank lines at the _start_ of each line or
+		 frame after each HSYNC or VSYNC, so that the image starts with
+		 real RGB data (see regs 0x12, 0x13) (having set H_SIZE and,
+		 V_SIZE you don't have to care about blank pixels or blank
+		 lines at the end of each line or frame).
+	*/
+
+	struct v4l2_pix_format pix_format;
+	/*
+	   What you have to define here are: 1) initial 'width' and 'height' of
+	   the target rectangle 2) the initial 'pixelformat', which can be
+	   either V4L2_PIX_FMT_SN9C10X (for compressed video) or
+	   V4L2_PIX_FMT_SBGGR8 3) 'priv', which we'll be used to indicate the
+	   number of bits per pixel for uncompressed video, 8 or 9 (despite the
+	   current value of 'pixelformat').
+	   NOTE 1: both 'width' and 'height' _must_ be either 1/1 or 1/2 or 1/4
+		   of cropcap.defrect.width and cropcap.defrect.height. I
+		   suggest 1/1.
+	   NOTE 2: The initial compression quality is defined by the first bit
+		   of reg 0x17 during the initialization of the image sensor.
+	   NOTE 3: as said above, you have to program the SN9C10X chip to get
+		   rid of any blank pixels, so that the output of the sensor
+		   matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR).
+	*/
+
+	int (*set_pix_format)(struct sn9c102_device* cam,
+			      const struct v4l2_pix_format* pix);
+	/*
+	   To be called on VIDIOC_S_FMT, when switching from the SBGGR8 to
+	   SN9C10X pixel format or viceversa. On error return the corresponding
+	   error code without rolling back.
+	*/
+
+	/*
+	   Do NOT write to the data below, it's READ ONLY. It is used by the
+	   core module to store successfully updated values of the above
+	   settings, for rollbacks..etc..in case of errors during atomic I/O
+	*/
+	struct v4l2_queryctrl _qctrl[SN9C102_MAX_CTRLS];
+	struct v4l2_rect _rect;
+};
+
+/*****************************************************************************/
+
+/* Private ioctl's for control settings supported by some image sensors */
+#define SN9C102_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE
+#define SN9C102_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1
+#define SN9C102_V4L2_CID_RESET_LEVEL V4L2_CID_PRIVATE_BASE + 2
+#define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE V4L2_CID_PRIVATE_BASE + 3
+#define SN9C102_V4L2_CID_GAMMA V4L2_CID_PRIVATE_BASE + 4
+#define SN9C102_V4L2_CID_BAND_FILTER V4L2_CID_PRIVATE_BASE + 5
+#define SN9C102_V4L2_CID_BRIGHT_LEVEL V4L2_CID_PRIVATE_BASE + 6
+
+#endif /* _SN9C102_SENSOR_H_ */
diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c
new file mode 100644
index 000000000000..294eb02fbd88
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c
@@ -0,0 +1,159 @@
+/***************************************************************************
+ * Plug-in for TAS5110C1B image sensor connected to the SN9C10x PC Camera  *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor tas5110c1b;
+
+
+static int tas5110c1b_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x01, 0x01);
+	err += sn9c102_write_reg(cam, 0x44, 0x01);
+	err += sn9c102_write_reg(cam, 0x00, 0x10);
+	err += sn9c102_write_reg(cam, 0x00, 0x11);
+	err += sn9c102_write_reg(cam, 0x0a, 0x14);
+	err += sn9c102_write_reg(cam, 0x60, 0x17);
+	err += sn9c102_write_reg(cam, 0x06, 0x18);
+	err += sn9c102_write_reg(cam, 0xfb, 0x19);
+
+	err += sn9c102_i2c_write(cam, 0xc0, 0x80);
+
+	return err;
+}
+
+
+static int tas5110c1b_set_ctrl(struct sn9c102_device* cam,
+			       const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err ? -EIO : 0;
+}
+
+
+static int tas5110c1b_set_crop(struct sn9c102_device* cam,
+			       const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &tas5110c1b;
+	int err = 0;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 69,
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 9;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	/* Don't change ! */
+	err += sn9c102_write_reg(cam, 0x14, 0x1a);
+	err += sn9c102_write_reg(cam, 0x0a, 0x1b);
+	err += sn9c102_write_reg(cam, sn9c102_pread_reg(cam, 0x19), 0x19);
+
+	return err;
+}
+
+
+static int tas5110c1b_set_pix_format(struct sn9c102_device* cam,
+				     const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x2b, 0x19);
+	else
+		err += sn9c102_write_reg(cam, 0xfb, 0x19);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor tas5110c1b = {
+	.name = "TAS5110C1B",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.sysfs_ops = SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_3WIRES,
+	.init = &tas5110c1b_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0xf6,
+			.step = 0x01,
+			.default_value = 0x40,
+			.flags = 0,
+		},
+	},
+	.set_ctrl = &tas5110c1b_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 352,
+			.height = 288,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 352,
+			.height = 288,
+		},
+	},
+	.set_crop = &tas5110c1b_set_crop,
+	.pix_format = {
+		.width = 352,
+		.height = 288,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &tas5110c1b_set_pix_format
+};
+
+
+int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam)
+{
+	const struct usb_device_id tas5110c1b_id_table[] = {
+		{ USB_DEVICE(0x0c45, 0x6001), },
+		{ USB_DEVICE(0x0c45, 0x6005), },
+		{ USB_DEVICE(0x0c45, 0x60ab), },
+		{ }
+	};
+
+	/* Sensor detection is based on USB pid/vid */
+	if (!sn9c102_match_id(cam, tas5110c1b_id_table))
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &tas5110c1b);
+
+	return 0;
+}
diff --git a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c
new file mode 100644
index 000000000000..9ecb09032b68
--- /dev/null
+++ b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c
@@ -0,0 +1,169 @@
+/***************************************************************************
+ * Plug-in for TAS5130D1B image sensor connected to the SN9C10x PC Camera  *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor tas5130d1b;
+
+
+static int tas5130d1b_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x01, 0x01);
+	err += sn9c102_write_reg(cam, 0x20, 0x17);
+	err += sn9c102_write_reg(cam, 0x04, 0x01);
+	err += sn9c102_write_reg(cam, 0x01, 0x10);
+	err += sn9c102_write_reg(cam, 0x00, 0x11);
+	err += sn9c102_write_reg(cam, 0x00, 0x14);
+	err += sn9c102_write_reg(cam, 0x60, 0x17);
+	err += sn9c102_write_reg(cam, 0x07, 0x18);
+
+	return err;
+}
+
+
+static int tas5130d1b_set_ctrl(struct sn9c102_device* cam,
+			       const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value);
+		break;
+	case V4L2_CID_EXPOSURE:
+		err += sn9c102_i2c_write(cam, 0x40, 0x47 - ctrl->value);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err ? -EIO : 0;
+}
+
+
+static int tas5130d1b_set_crop(struct sn9c102_device* cam,
+			       const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &tas5130d1b;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 104,
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 12;
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	/* Do NOT change! */
+	err += sn9c102_write_reg(cam, 0x1f, 0x1a);
+	err += sn9c102_write_reg(cam, 0x1a, 0x1b);
+	err += sn9c102_write_reg(cam, sn9c102_pread_reg(cam, 0x19), 0x19);
+
+	return err;
+}
+
+
+static int tas5130d1b_set_pix_format(struct sn9c102_device* cam,
+				     const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x63, 0x19);
+	else
+		err += sn9c102_write_reg(cam, 0xf3, 0x19);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor tas5130d1b = {
+	.name = "TAS5130D1B",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.sysfs_ops = SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_3WIRES,
+	.init = &tas5130d1b_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0xf6,
+			.step = 0x02,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x00,
+			.maximum = 0x47,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+	},
+	.set_ctrl = &tas5130d1b_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.set_crop = &tas5130d1b_set_crop,
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &tas5130d1b_set_pix_format
+};
+
+
+int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam)
+{
+	const struct usb_device_id tas5130d1b_id_table[] = {
+		{ USB_DEVICE(0x0c45, 0x6025), },
+		{ USB_DEVICE(0x0c45, 0x60aa), },
+		{ }
+	};
+
+	/* Sensor detection is based on USB pid/vid */
+	if (!sn9c102_match_id(cam, tas5130d1b_id_table))
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &tas5130d1b);
+
+	return 0;
+}
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 9d769264a329..07476c71174a 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * stradis.c - stradis 4:2:2 mpeg decoder driver
  *
  * Stradis 4:2:2 MPEG-2 Decoder Driver
@@ -1191,9 +1191,9 @@ static void saa7146_set_winsize(struct saa7146 *saa)
 }
 
 /* clip_draw_rectangle(cm,x,y,w,h) -- handle clipping an area
- * bitmap is fixed width, 128 bytes (1024 pixels represented) 
- * arranged most-sigificant-bit-left in 32-bit words 
- * based on saa7146 clipping hardware, it swaps bytes if LE 
+ * bitmap is fixed width, 128 bytes (1024 pixels represented)
+ * arranged most-sigificant-bit-left in 32-bit words
+ * based on saa7146 clipping hardware, it swaps bytes if LE
  * much of this makes up for egcs brain damage -- so if you
  * are wondering "why did he do this?" it is because the C
  * was adjusted to generate the optimal asm output without
@@ -1259,7 +1259,7 @@ static void make_clip_tab(struct saa7146 *saa, struct video_clip *cr, int ncr)
 			clip_draw_rectangle(clipmap, cr[i].x, cr[i].y,
 				cr[i].width, cr[i].height);
 	}
-	/* clip against viewing window AND screen 
+	/* clip against viewing window AND screen
 	   so we do not have to rely on the user program
 	 */
 	clip_draw_rectangle(clipmap, (saa->win.x + width > saa->win.swidth) ?
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
new file mode 100644
index 000000000000..b38bda83a7c5
--- /dev/null
+++ b/drivers/media/video/stv680.c
@@ -0,0 +1,1508 @@
+/*
+ *  STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net)
+ *
+ * Thanks to STMicroelectronics for information on the usb commands, and
+ * to Steve Miller at STM for his help and encouragement while I was
+ * writing this driver.
+ *
+ * This driver is based heavily on the
+ * Endpoints (formerly known as AOX) se401 USB Camera Driver
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * Still somewhat based on the Linux ov511 driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * History:
+ * ver 0.1 October, 2001. Initial attempt.
+ *
+ * ver 0.2 November, 2001. Fixed asbility to resize, added brightness
+ *                         function, made more stable (?)
+ *
+ * ver 0.21 Nov, 2001.     Added gamma correction and white balance,
+ *                         due to Alexander Schwartz. Still trying to
+ *                         improve stablility. Moved stuff into stv680.h
+ *
+ * ver 0.22 Nov, 2001.	   Added sharpen function (by Michael Sweet,
+ *                         mike@easysw.com) from GIMP, also used in pencam.
+ *                         Simple, fast, good integer math routine.
+ *
+ * ver 0.23 Dec, 2001 (gkh)
+ * 			   Took out sharpen function, ran code through
+ * 			   Lindent, and did other minor tweaks to get
+ * 			   things to work properly with 2.5.1
+ *
+ * ver 0.24 Jan, 2002 (kjs)
+ *                         Fixed the problem with webcam crashing after
+ *                         two pictures. Changed the way pic is halved to
+ *                         improve quality. Got rid of green line around
+ *                         frame. Fix brightness reset when changing size
+ *                         bug. Adjusted gamma filters slightly.
+ *
+ * ver 0.25 Jan, 2002 (kjs)
+ *			   Fixed a bug in which the driver sometimes attempted
+ *			   to set to a non-supported size. This allowed
+ *			   gnomemeeting to work.
+ *			   Fixed proc entry removal bug.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/errno.h>
+#include <linux/videodev.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+
+#include "stv680.h"
+
+static int video_nr = -1;
+static int swapRGB = 0;   /* default for auto sleect */
+static int swapRGB_on = 0; /* default to allow auto select; -1=swap never, +1= swap always */
+
+static unsigned int debug = 0;
+
+#define PDEBUG(level, fmt, args...) \
+	do { \
+	if (debug >= level)	\
+		info("[%s:%d] " fmt, __FUNCTION__, __LINE__ , ## args);	\
+	} while (0)
+
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.25"
+#define DRIVER_AUTHOR "Kevin Sisson <kjsisson@bellsouth.net>"
+#define DRIVER_DESC "STV0680 USB Camera Driver"
+
+MODULE_AUTHOR (DRIVER_AUTHOR);
+MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_LICENSE ("GPL");
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC (debug, "Debug enabled or not");
+module_param(swapRGB_on, int, 0);
+MODULE_PARM_DESC (swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never");
+module_param(video_nr, int, 0);
+
+/********************************************************************
+ *
+ * Memory management
+ *
+ * This is a shameless copy from the USB-cpia driver (linux kernel
+ * version 2.3.29 or so, I have no idea what this code actually does ;).
+ * Actually it seems to be a copy of a shameless copy of the bttv-driver.
+ * Or that is a copy of a shameless copy of ... (To the powers: is there
+ * no generic kernel-function to do this sort of stuff?)
+ *
+ * Yes, it was a shameless copy from the bttv-driver. IIRC, Alan says
+ * there will be one, but apparentely not yet -jerdfelt
+ *
+ * So I copied it again for the ov511 driver -claudio
+ *
+ * Same for the se401 driver -Jeroen
+ *
+ * And the STV0680 driver - Kevin
+ ********************************************************************/
+static void *rvmalloc (unsigned long size)
+{
+	void *mem;
+	unsigned long adr;
+
+	size = PAGE_ALIGN(size);
+	mem = vmalloc_32 (size);
+	if (!mem)
+		return NULL;
+
+	memset (mem, 0, size);	/* Clear the ram out, no junk to the user */
+	adr = (unsigned long) mem;
+	while (size > 0) {
+		SetPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	return mem;
+}
+
+static void rvfree (void *mem, unsigned long size)
+{
+	unsigned long adr;
+
+	if (!mem)
+		return;
+
+	adr = (unsigned long) mem;
+	while ((long) size > 0) {
+		ClearPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	vfree (mem);
+}
+
+
+/*********************************************************************
+ * pencam read/write functions
+ ********************************************************************/
+
+static int stv_sndctrl (int set, struct usb_stv *stv680, unsigned short req, unsigned short value, unsigned char *buffer, int size)
+{
+	int ret = -1;
+
+	switch (set) {
+	case 0:		/*  0xc1  */
+		ret = usb_control_msg (stv680->udev,
+				       usb_rcvctrlpipe (stv680->udev, 0),
+				       req,
+				       (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT),
+				       value, 0, buffer, size, PENCAM_TIMEOUT);
+		break;
+
+	case 1:		/*  0x41  */
+		ret = usb_control_msg (stv680->udev,
+				       usb_sndctrlpipe (stv680->udev, 0),
+				       req,
+				       (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT),
+				       value, 0, buffer, size, PENCAM_TIMEOUT);
+		break;
+
+	case 2:		/*  0x80  */
+		ret = usb_control_msg (stv680->udev,
+				       usb_rcvctrlpipe (stv680->udev, 0),
+				       req,
+				       (USB_DIR_IN | USB_RECIP_DEVICE),
+				       value, 0, buffer, size, PENCAM_TIMEOUT);
+		break;
+
+	case 3:		/*  0x40  */
+		ret = usb_control_msg (stv680->udev,
+				       usb_sndctrlpipe (stv680->udev, 0),
+				       req,
+				       (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE),
+				       value, 0, buffer, size, PENCAM_TIMEOUT);
+		break;
+
+	}
+	if ((ret < 0) && (req != 0x0a)) {
+		PDEBUG (1, "STV(e): usb_control_msg error %i, request = 0x%x, error = %i", set, req, ret);
+	}
+	return ret;
+}
+
+static int stv_set_config (struct usb_stv *dev, int configuration, int interface, int alternate)
+{
+
+	if (configuration != dev->udev->actconfig->desc.bConfigurationValue
+			|| usb_reset_configuration (dev->udev) < 0) {
+		PDEBUG (1, "STV(e): FAILED to reset configuration %i", configuration);
+		return -1;
+	}
+	if (usb_set_interface (dev->udev, interface, alternate) < 0) {
+		PDEBUG (1, "STV(e): FAILED to set alternate interface %i", alternate);
+		return -1;
+	}
+	return 0;
+}
+
+static int stv_stop_video (struct usb_stv *dev)
+{
+	int i;
+	unsigned char *buf;
+
+	buf = kmalloc (40, GFP_KERNEL);
+	if (buf == NULL) {
+		PDEBUG (0, "STV(e): Out of (small buf) memory");
+		return -1;
+	}
+
+	/* this is a high priority command; it stops all lower order commands */
+	if ((i = stv_sndctrl (1, dev, 0x04, 0x0000, buf, 0x0)) < 0) {
+		i = stv_sndctrl (0, dev, 0x80, 0, buf, 0x02);	/* Get Last Error; 2 = busy */
+		PDEBUG (1, "STV(i): last error: %i,  command = 0x%x", buf[0], buf[1]);
+	} else {
+		PDEBUG (1, "STV(i): Camera reset to idle mode.");
+	}
+
+	if ((i = stv_set_config (dev, 1, 0, 0)) < 0)
+		PDEBUG (1, "STV(e): Reset config during exit failed");
+
+	/*  get current mode  */
+	buf[0] = 0xf0;
+	if ((i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08)) != 0x08)	/* get mode */
+		PDEBUG (0, "STV(e): Stop_video: problem setting original mode");
+	if (dev->origMode != buf[0]) {
+		memset (buf, 0, 8);
+		buf[0] = (unsigned char) dev->origMode;
+		if ((i = stv_sndctrl (3, dev, 0x07, 0x0100, buf, 0x08)) != 0x08) {
+			PDEBUG (0, "STV(e): Stop_video: Set_Camera_Mode failed");
+			i = -1;
+		}
+		buf[0] = 0xf0;
+		i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08);
+		if ((i != 0x08) || (buf[0] != dev->origMode)) {
+			PDEBUG (0, "STV(e): camera NOT set to original resolution.");
+			i = -1;
+		} else
+			PDEBUG (0, "STV(i): Camera set to original resolution");
+	}
+	/* origMode */
+	kfree(buf);
+	return i;
+}
+
+static int stv_set_video_mode (struct usb_stv *dev)
+{
+	int i, stop_video = 1;
+	unsigned char *buf;
+
+	buf = kmalloc (40, GFP_KERNEL);
+	if (buf == NULL) {
+		PDEBUG (0, "STV(e): Out of (small buf) memory");
+		return -1;
+	}
+
+	if ((i = stv_set_config (dev, 1, 0, 0)) < 0) {
+		kfree(buf);
+		return i;
+	}
+
+	i = stv_sndctrl (2, dev, 0x06, 0x0100, buf, 0x12);
+	if (!(i > 0) && (buf[8] == 0x53) && (buf[9] == 0x05)) {
+		PDEBUG (1, "STV(e): Could not get descriptor 0100.");
+		goto error;
+	}
+
+	/*  set alternate interface 1 */
+	if ((i = stv_set_config (dev, 1, 0, 1)) < 0)
+		goto error;
+
+	if ((i = stv_sndctrl (0, dev, 0x85, 0, buf, 0x10)) != 0x10)
+		goto error;
+	PDEBUG (1, "STV(i): Setting video mode.");
+	/*  Switch to Video mode: 0x0100 = VGA (640x480), 0x0000 = CIF (352x288) 0x0300 = QVGA (320x240)  */
+	if ((i = stv_sndctrl (1, dev, 0x09, dev->VideoMode, buf, 0x0)) < 0) {
+		stop_video = 0;
+		goto error;
+	}
+	goto exit;
+
+error:
+	kfree(buf);
+	if (stop_video == 1)
+		stv_stop_video (dev);
+	return -1;
+
+exit:
+	kfree(buf);
+	return 0;
+}
+
+static int stv_init (struct usb_stv *stv680)
+{
+	int i = 0;
+	unsigned char *buffer;
+	unsigned long int bufsize;
+
+	buffer = kzalloc (40, GFP_KERNEL);
+	if (buffer == NULL) {
+		PDEBUG (0, "STV(e): Out of (small buf) memory");
+		return -1;
+	}
+	udelay (100);
+
+	/* set config 1, interface 0, alternate 0 */
+	if ((i = stv_set_config (stv680, 1, 0, 0)) < 0) {
+		kfree(buffer);
+		PDEBUG (0, "STV(e): set config 1,0,0 failed");
+		return -1;
+	}
+	/* ping camera to be sure STV0680 is present */
+	if ((i = stv_sndctrl (0, stv680, 0x88, 0x5678, buffer, 0x02)) != 0x02)
+		goto error;
+	if ((buffer[0] != 0x56) || (buffer[1] != 0x78)) {
+		PDEBUG (1, "STV(e): camera ping failed!!");
+		goto error;
+	}
+
+	/* get camera descriptor */
+	if ((i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x09)) != 0x09)
+		goto error;
+	i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x22);
+	if (!(i >= 0) && (buffer[7] == 0xa0) && (buffer[8] == 0x23)) {
+		PDEBUG (1, "STV(e): Could not get descriptor 0200.");
+		goto error;
+	}
+	if ((i = stv_sndctrl (0, stv680, 0x8a, 0, buffer, 0x02)) != 0x02)
+		goto error;
+	if ((i = stv_sndctrl (0, stv680, 0x8b, 0, buffer, 0x24)) != 0x24)
+		goto error;
+	if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10)
+		goto error;
+
+	stv680->SupportedModes = buffer[7];
+	i = stv680->SupportedModes;
+	stv680->CIF = 0;
+	stv680->VGA = 0;
+	stv680->QVGA = 0;
+	if (i & 1)
+		stv680->CIF = 1;
+	if (i & 2)
+		stv680->VGA = 1;
+	if (i & 8)
+		stv680->QVGA = 1;
+	if (stv680->SupportedModes == 0) {
+		PDEBUG (0, "STV(e): There are NO supported STV680 modes!!");
+		i = -1;
+		goto error;
+	} else {
+		if (stv680->CIF)
+			PDEBUG (0, "STV(i): CIF is supported");
+		if (stv680->QVGA)
+			PDEBUG (0, "STV(i): QVGA is supported");
+	}
+	/* FW rev, ASIC rev, sensor ID  */
+	PDEBUG (1, "STV(i): Firmware rev is %i.%i", buffer[0], buffer[1]);
+	PDEBUG (1, "STV(i): ASIC rev is %i.%i", buffer[2], buffer[3]);
+	PDEBUG (1, "STV(i): Sensor ID is %i", (buffer[4]*16) + (buffer[5]>>4));
+
+	/*  set alternate interface 1 */
+	if ((i = stv_set_config (stv680, 1, 0, 1)) < 0)
+		goto error;
+
+	if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10)
+		goto error;
+	if ((i = stv_sndctrl (0, stv680, 0x8d, 0, buffer, 0x08)) != 0x08)
+		goto error;
+	i = buffer[3];
+	PDEBUG (0, "STV(i): Camera has %i pictures.", i);
+
+	/*  get current mode */
+	if ((i = stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08)) != 0x08)
+		goto error;
+	stv680->origMode = buffer[0];	/* 01 = VGA, 03 = QVGA, 00 = CIF */
+
+	/* This will attemp CIF mode, if supported. If not, set to QVGA  */
+	memset (buffer, 0, 8);
+	if (stv680->CIF)
+		buffer[0] = 0x00;
+	else if (stv680->QVGA)
+		buffer[0] = 0x03;
+	if ((i = stv_sndctrl (3, stv680, 0x07, 0x0100, buffer, 0x08)) != 0x08) {
+		PDEBUG (0, "STV(i): Set_Camera_Mode failed");
+		i = -1;
+		goto error;
+	}
+	buffer[0] = 0xf0;
+	stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08);
+	if (((stv680->CIF == 1) && (buffer[0] != 0x00)) || ((stv680->QVGA == 1) && (buffer[0] != 0x03))) {
+		PDEBUG (0, "STV(e): Error setting camera video mode!");
+		i = -1;
+		goto error;
+	} else {
+		if (buffer[0] == 0) {
+			stv680->VideoMode = 0x0000;
+			PDEBUG (0, "STV(i): Video Mode set to CIF");
+		}
+		if (buffer[0] == 0x03) {
+			stv680->VideoMode = 0x0300;
+			PDEBUG (0, "STV(i): Video Mode set to QVGA");
+		}
+	}
+	if ((i = stv_sndctrl (0, stv680, 0x8f, 0, buffer, 0x10)) != 0x10)
+		goto error;
+	bufsize = (buffer[0] << 24) | (buffer[1] << 16) | (buffer[2] << 8) | (buffer[3]);
+	stv680->cwidth = (buffer[4] << 8) | (buffer[5]);	/* ->camera = 322, 356, 644  */
+	stv680->cheight = (buffer[6] << 8) | (buffer[7]);	/* ->camera = 242, 292, 484  */
+	stv680->origGain = buffer[12];
+
+	goto exit;
+
+error:
+	i = stv_sndctrl (0, stv680, 0x80, 0, buffer, 0x02);	/* Get Last Error */
+	PDEBUG (1, "STV(i): last error: %i,  command = 0x%x", buffer[0], buffer[1]);
+	kfree(buffer);
+	return -1;
+
+exit:
+	kfree(buffer);
+
+	/* video = 320x240, 352x288 */
+	if (stv680->CIF == 1) {
+		stv680->maxwidth = 352;
+		stv680->maxheight = 288;
+		stv680->vwidth = 352;
+		stv680->vheight = 288;
+	}
+	if (stv680->QVGA == 1) {
+		stv680->maxwidth = 320;
+		stv680->maxheight = 240;
+		stv680->vwidth = 320;
+		stv680->vheight = 240;
+	}
+
+	stv680->rawbufsize = bufsize;	/* must be ./. by 8 */
+	stv680->maxframesize = bufsize * 3;	/* RGB size */
+	PDEBUG (2, "STV(i): cwidth = %i, cheight = %i", stv680->cwidth, stv680->cheight);
+	PDEBUG (1, "STV(i): width = %i, height = %i, rawbufsize = %li", stv680->vwidth, stv680->vheight, stv680->rawbufsize);
+
+	/* some default values */
+	stv680->bulk_in_endpointAddr = 0x82;
+	stv680->dropped = 0;
+	stv680->error = 0;
+	stv680->framecount = 0;
+	stv680->readcount = 0;
+	stv680->streaming = 0;
+	/* bright, white, colour, hue, contrast are set by software, not in stv0680 */
+	stv680->brightness = 32767;
+	stv680->chgbright = 0;
+	stv680->whiteness = 0;	/* only for greyscale */
+	stv680->colour = 32767;
+	stv680->contrast = 32767;
+	stv680->hue = 32767;
+	stv680->palette = STV_VIDEO_PALETTE;
+	stv680->depth = 24;	/* rgb24 bits */
+	if ((swapRGB_on == 0) && (swapRGB == 0))
+		PDEBUG (1, "STV(i): swapRGB is (auto) OFF");
+	else if ((swapRGB_on == 0) && (swapRGB == 1))
+		PDEBUG (1, "STV(i): swapRGB is (auto) ON");
+	else if (swapRGB_on == 1)
+		PDEBUG (1, "STV(i): swapRGB is (forced) ON");
+	else if (swapRGB_on == -1)
+		PDEBUG (1, "STV(i): swapRGB is (forced) OFF");
+
+	if (stv_set_video_mode (stv680) < 0) {
+		PDEBUG (0, "STV(e): Could not set video mode in stv_init");
+		return -1;
+	}
+
+	return 0;
+}
+
+/***************** last of pencam  routines  *******************/
+
+/****************************************************************************
+ *  sysfs
+ ***************************************************************************/
+#define stv680_file(name, variable, field)				\
+static ssize_t show_##name(struct class_device *class_dev, char *buf)	\
+{									\
+	struct video_device *vdev = to_video_device(class_dev);		\
+	struct usb_stv *stv = video_get_drvdata(vdev);			\
+	return sprintf(buf, field, stv->variable);			\
+}									\
+static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
+
+stv680_file(model, camera_name, "%s\n");
+stv680_file(in_use, user, "%d\n");
+stv680_file(streaming, streaming, "%d\n");
+stv680_file(palette, palette, "%i\n");
+stv680_file(frames_total, readcount, "%d\n");
+stv680_file(frames_read, framecount, "%d\n");
+stv680_file(packets_dropped, dropped, "%d\n");
+stv680_file(decoding_errors, error, "%d\n");
+
+static void stv680_create_sysfs_files(struct video_device *vdev)
+{
+	video_device_create_file(vdev, &class_device_attr_model);
+	video_device_create_file(vdev, &class_device_attr_in_use);
+	video_device_create_file(vdev, &class_device_attr_streaming);
+	video_device_create_file(vdev, &class_device_attr_palette);
+	video_device_create_file(vdev, &class_device_attr_frames_total);
+	video_device_create_file(vdev, &class_device_attr_frames_read);
+	video_device_create_file(vdev, &class_device_attr_packets_dropped);
+	video_device_create_file(vdev, &class_device_attr_decoding_errors);
+}
+
+static void stv680_remove_sysfs_files(struct video_device *vdev)
+{
+	video_device_remove_file(vdev, &class_device_attr_model);
+	video_device_remove_file(vdev, &class_device_attr_in_use);
+	video_device_remove_file(vdev, &class_device_attr_streaming);
+	video_device_remove_file(vdev, &class_device_attr_palette);
+	video_device_remove_file(vdev, &class_device_attr_frames_total);
+	video_device_remove_file(vdev, &class_device_attr_frames_read);
+	video_device_remove_file(vdev, &class_device_attr_packets_dropped);
+	video_device_remove_file(vdev, &class_device_attr_decoding_errors);
+}
+
+/********************************************************************
+ * Camera control
+ *******************************************************************/
+
+static int stv680_get_pict (struct usb_stv *stv680, struct video_picture *p)
+{
+	/* This sets values for v4l interface. max/min = 65535/0  */
+
+	p->brightness = stv680->brightness;
+	p->whiteness = stv680->whiteness;	/* greyscale */
+	p->colour = stv680->colour;
+	p->contrast = stv680->contrast;
+	p->hue = stv680->hue;
+	p->palette = stv680->palette;
+	p->depth = stv680->depth;
+	return 0;
+}
+
+static int stv680_set_pict (struct usb_stv *stv680, struct video_picture *p)
+{
+	/* See above stv680_get_pict  */
+
+	if (p->palette != STV_VIDEO_PALETTE) {
+		PDEBUG (2, "STV(e): Palette set error in _set_pic");
+		return 1;
+	}
+
+	if (stv680->brightness != p->brightness) {
+		stv680->chgbright = 1;
+		stv680->brightness = p->brightness;
+	}
+
+	stv680->whiteness = p->whiteness;	/* greyscale */
+	stv680->colour = p->colour;
+	stv680->contrast = p->contrast;
+	stv680->hue = p->hue;
+	stv680->palette = p->palette;
+	stv680->depth = p->depth;
+
+	return 0;
+}
+
+static void stv680_video_irq (struct urb *urb, struct pt_regs *regs)
+{
+	struct usb_stv *stv680 = urb->context;
+	int length = urb->actual_length;
+
+	if (length < stv680->rawbufsize)
+		PDEBUG (2, "STV(i): Lost data in transfer: exp %li, got %i", stv680->rawbufsize, length);
+
+	/* ohoh... */
+	if (!stv680->streaming)
+		return;
+
+	if (!stv680->udev) {
+		PDEBUG (0, "STV(e): device vapourished in video_irq");
+		return;
+	}
+
+	/* 0 sized packets happen if we are to fast, but sometimes the camera
+	   keeps sending them forever...
+	 */
+	if (length && !urb->status) {
+		stv680->nullpackets = 0;
+		switch (stv680->scratch[stv680->scratch_next].state) {
+		case BUFFER_READY:
+		case BUFFER_BUSY:
+			stv680->dropped++;
+			break;
+
+		case BUFFER_UNUSED:
+			memcpy (stv680->scratch[stv680->scratch_next].data,
+				(unsigned char *) urb->transfer_buffer, length);
+			stv680->scratch[stv680->scratch_next].state = BUFFER_READY;
+			stv680->scratch[stv680->scratch_next].length = length;
+			if (waitqueue_active (&stv680->wq)) {
+				wake_up_interruptible (&stv680->wq);
+			}
+			stv680->scratch_overflow = 0;
+			stv680->scratch_next++;
+			if (stv680->scratch_next >= STV680_NUMSCRATCH)
+				stv680->scratch_next = 0;
+			break;
+		}		/* switch  */
+	} else {
+		stv680->nullpackets++;
+		if (stv680->nullpackets > STV680_MAX_NULLPACKETS) {
+			if (waitqueue_active (&stv680->wq)) {
+				wake_up_interruptible (&stv680->wq);
+			}
+		}
+	}			/*  if - else */
+
+	/* Resubmit urb for new data */
+	urb->status = 0;
+	urb->dev = stv680->udev;
+	if (usb_submit_urb (urb, GFP_ATOMIC))
+		PDEBUG (0, "STV(e): urb burned down in video irq");
+	return;
+}				/*  _video_irq  */
+
+static int stv680_start_stream (struct usb_stv *stv680)
+{
+	struct urb *urb;
+	int err = 0, i;
+
+	stv680->streaming = 1;
+
+	/* Do some memory allocation */
+	for (i = 0; i < STV680_NUMFRAMES; i++) {
+		stv680->frame[i].data = stv680->fbuf + i * stv680->maxframesize;
+		stv680->frame[i].curpix = 0;
+	}
+	/* packet size = 4096  */
+	for (i = 0; i < STV680_NUMSBUF; i++) {
+		stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL);
+		if (stv680->sbuf[i].data == NULL) {
+			PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i);
+			return -1;
+		}
+	}
+
+	stv680->scratch_next = 0;
+	stv680->scratch_use = 0;
+	stv680->scratch_overflow = 0;
+	for (i = 0; i < STV680_NUMSCRATCH; i++) {
+		stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL);
+		if (stv680->scratch[i].data == NULL) {
+			PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i);
+			return -1;
+		}
+		stv680->scratch[i].state = BUFFER_UNUSED;
+	}
+
+	for (i = 0; i < STV680_NUMSBUF; i++) {
+		urb = usb_alloc_urb (0, GFP_KERNEL);
+		if (!urb)
+			return -ENOMEM;
+
+		/* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */
+		usb_fill_bulk_urb (urb, stv680->udev,
+				   usb_rcvbulkpipe (stv680->udev, stv680->bulk_in_endpointAddr),
+				   stv680->sbuf[i].data, stv680->rawbufsize,
+				   stv680_video_irq, stv680);
+		stv680->urb[i] = urb;
+		err = usb_submit_urb (stv680->urb[i], GFP_KERNEL);
+		if (err)
+			PDEBUG (0, "STV(e): urb burned down in start stream");
+	}			/* i STV680_NUMSBUF */
+
+	stv680->framecount = 0;
+	return 0;
+}
+
+static int stv680_stop_stream (struct usb_stv *stv680)
+{
+	int i;
+
+	if (!stv680->streaming || !stv680->udev)
+		return 1;
+
+	stv680->streaming = 0;
+
+	for (i = 0; i < STV680_NUMSBUF; i++)
+		if (stv680->urb[i]) {
+			usb_kill_urb (stv680->urb[i]);
+			usb_free_urb (stv680->urb[i]);
+			stv680->urb[i] = NULL;
+			kfree(stv680->sbuf[i].data);
+		}
+	for (i = 0; i < STV680_NUMSCRATCH; i++) {
+		kfree(stv680->scratch[i].data);
+		stv680->scratch[i].data = NULL;
+	}
+
+	return 0;
+}
+
+static int stv680_set_size (struct usb_stv *stv680, int width, int height)
+{
+	int wasstreaming = stv680->streaming;
+
+	/* Check to see if we need to change */
+	if ((stv680->vwidth == width) && (stv680->vheight == height))
+		return 0;
+
+	PDEBUG (1, "STV(i): size request for %i x %i", width, height);
+	/* Check for a valid mode */
+	if ((!width || !height) || ((width & 1) || (height & 1))) {
+		PDEBUG (1, "STV(e): set_size error: request: v.width = %i, v.height = %i  actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight);
+		return 1;
+	}
+
+	if ((width < (stv680->maxwidth / 2)) || (height < (stv680->maxheight / 2))) {
+		width = stv680->maxwidth / 2;
+		height = stv680->maxheight / 2;
+	} else if ((width >= 158) && (width <= 166) && (stv680->QVGA == 1)) {
+		width = 160;
+		height = 120;
+	} else if ((width >= 172) && (width <= 180) && (stv680->CIF == 1)) {
+		width = 176;
+		height = 144;
+	} else if ((width >= 318) && (width <= 350) && (stv680->QVGA == 1)) {
+		width = 320;
+		height = 240;
+	} else if ((width >= 350) && (width <= 358) && (stv680->CIF == 1)) {
+		width = 352;
+		height = 288;
+	} else {
+		PDEBUG (1, "STV(e): request for non-supported size: request: v.width = %i, v.height = %i  actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight);
+		return 1;
+	}
+
+	/* Stop a current stream and start it again at the new size */
+	if (wasstreaming)
+		stv680_stop_stream (stv680);
+	stv680->vwidth = width;
+	stv680->vheight = height;
+	PDEBUG (1, "STV(i): size set to %i x %i", stv680->vwidth, stv680->vheight);
+	if (wasstreaming)
+		stv680_start_stream (stv680);
+
+	return 0;
+}
+
+/**********************************************************************
+ * Video Decoding
+ **********************************************************************/
+
+/*******  routines from the pencam program; hey, they work!  ********/
+
+/*
+ * STV0680 Vision Camera Chipset Driver
+ * Copyright (C) 2000 Adam Harrison <adam@antispin.org>
+*/
+
+#define RED 0
+#define GREEN 1
+#define BLUE 2
+#define AD(x, y, w) (((y)*(w)+(x))*3)
+
+static void bayer_unshuffle (struct usb_stv *stv680, struct stv680_scratch *buffer)
+{
+	int x, y, i;
+	int w = stv680->cwidth;
+	int vw = stv680->cwidth, vh = stv680->cheight;
+	unsigned int p = 0;
+	int colour = 0, bayer = 0;
+	unsigned char *raw = buffer->data;
+	struct stv680_frame *frame = &stv680->frame[stv680->curframe];
+	unsigned char *output = frame->data;
+	unsigned char *temp = frame->data;
+	int offset = buffer->offset;
+
+	if (frame->curpix == 0) {
+		if (frame->grabstate == FRAME_READY) {
+			frame->grabstate = FRAME_GRABBING;
+		}
+	}
+	if (offset != frame->curpix) {	/* Regard frame as lost :( */
+		frame->curpix = 0;
+		stv680->error++;
+		return;
+	}
+
+	if ((stv680->vwidth == 320) || (stv680->vwidth == 160)) {
+		vw = 320;
+		vh = 240;
+	}
+	if ((stv680->vwidth == 352) || (stv680->vwidth == 176)) {
+		vw = 352;
+		vh = 288;
+	}
+
+	memset (output, 0, 3 * vw * vh);	/* clear output matrix. */
+
+	for (y = 0; y < vh; y++) {
+		for (x = 0; x < vw; x++) {
+			if (x & 1)
+				p = *(raw + y * w + (x >> 1));
+			else
+				p = *(raw + y * w + (x >> 1) + (w >> 1));
+
+			if (y & 1)
+				bayer = 2;
+			else
+				bayer = 0;
+			if (x & 1)
+				bayer++;
+
+			switch (bayer) {
+			case 0:
+			case 3:
+				colour = 1;
+				break;
+			case 1:
+				colour = 0;
+				break;
+			case 2:
+				colour = 2;
+				break;
+			}
+			i = (y * vw + x) * 3;
+			*(output + i + colour) = (unsigned char) p;
+		}		/* for x */
+
+	}			/* for y */
+
+	/****** gamma correction plus hardcoded white balance */
+	/* Thanks to Alexander Schwartx <alexander.schwartx@gmx.net> for this code.
+	   Correction values red[], green[], blue[], are generated by
+	   (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255.
+	   White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and
+	   converted to unsigned char. Values are in stv680.h  */
+
+	for (y = 0; y < vh; y++) {
+		for (x = 0; x < vw; x++) {
+			i = (y * vw + x) * 3;
+			*(output + i) = red[*(output + i)];
+			*(output + i + 1) = green[*(output + i + 1)];
+			*(output + i + 2) = blue[*(output + i + 2)];
+		}
+	}
+
+	/******  bayer demosaic  ******/
+	for (y = 1; y < (vh - 1); y++) {
+		for (x = 1; x < (vw - 1); x++) {	/* work out pixel type */
+			if (y & 1)
+				bayer = 0;
+			else
+				bayer = 2;
+			if (!(x & 1))
+				bayer++;
+
+			switch (bayer) {
+			case 0:	/* green. blue lr, red tb */
+				*(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y, vw) + BLUE) + (int) *(output + AD (x + 1, y, vw) + BLUE)) >> 1;
+				*(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x, y - 1, vw) + RED) + (int) *(output + AD (x, y + 1, vw) + RED)) >> 1;
+				break;
+
+			case 1:	/* blue. green lrtb, red diagonals */
+				*(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2;
+				*(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y - 1, vw) + RED) + (int) *(output + AD (x - 1, y + 1, vw) + RED) + (int) *(output + AD (x + 1, y - 1, vw) + RED) + (int) *(output + AD (x + 1, y + 1, vw) + RED)) >> 2;
+				break;
+
+			case 2:	/* red. green lrtb, blue diagonals */
+				*(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2;
+				*(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y - 1, vw) + BLUE) + (int) *(output + AD (x + 1, y - 1, vw) + BLUE) + (int) *(output + AD (x - 1, y + 1, vw) + BLUE) + (int) *(output + AD (x + 1, y + 1, vw) + BLUE)) >> 2;
+				break;
+
+			case 3:	/* green. red lr, blue tb */
+				*(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y, vw) + RED) + (int) *(output + AD (x + 1, y, vw) + RED)) >> 1;
+				*(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x, y - 1, vw) + BLUE) + (int) *(output + AD (x, y + 1, vw) + BLUE)) >> 1;
+				break;
+			}	/* switch */
+		}		/* for x */
+	}			/* for y  - end demosaic  */
+
+	/* fix top and bottom row, left and right side */
+	i = vw * 3;
+	memcpy (output, (output + i), i);
+	memcpy ((output + (vh * i)), (output + ((vh - 1) * i)), i);
+	for (y = 0; y < vh; y++) {
+		i = y * vw * 3;
+		memcpy ((output + i), (output + i + 3), 3);
+		memcpy ((output + i + (vw * 3)), (output + i + (vw - 1) * 3), 3);
+	}
+
+	/*  process all raw data, then trim to size if necessary */
+	if ((stv680->vwidth == 160) || (stv680->vwidth == 176))  {
+		i = 0;
+		for (y = 0; y < vh; y++) {
+			if (!(y & 1)) {
+				for (x = 0; x < vw; x++) {
+					p = (y * vw + x) * 3;
+					if (!(x & 1)) {
+						*(output + i) = *(output + p);
+						*(output + i + 1) = *(output + p + 1);
+						*(output + i + 2) = *(output + p + 2);
+						i += 3;
+					}
+				}  /* for x */
+			}
+		}  /* for y */
+	}
+	/* reset to proper width */
+	if ((stv680->vwidth == 160)) {
+		vw = 160;
+		vh = 120;
+	}
+	if ((stv680->vwidth == 176)) {
+		vw = 176;
+		vh = 144;
+	}
+
+	/* output is RGB; some programs want BGR  */
+	/* swapRGB_on=0 -> program decides;  swapRGB_on=1, always swap */
+	/* swapRGB_on=-1, never swap */
+	if (((swapRGB == 1) && (swapRGB_on != -1)) || (swapRGB_on == 1)) {
+		for (y = 0; y < vh; y++) {
+			for (x = 0; x < vw; x++) {
+				i = (y * vw + x) * 3;
+				*(temp) = *(output + i);
+				*(output + i) = *(output + i + 2);
+				*(output + i + 2) = *(temp);
+			}
+		}
+	}
+	/* brightness */
+	if (stv680->chgbright == 1) {
+		if (stv680->brightness >= 32767) {
+			p = (stv680->brightness - 32767) / 256;
+			for (x = 0; x < (vw * vh * 3); x++) {
+				if ((*(output + x) + (unsigned char) p) > 255)
+					*(output + x) = 255;
+				else
+					*(output + x) += (unsigned char) p;
+			}	/* for */
+		} else {
+			p = (32767 - stv680->brightness) / 256;
+			for (x = 0; x < (vw * vh * 3); x++) {
+				if ((unsigned char) p > *(output + x))
+					*(output + x) = 0;
+				else
+					*(output + x) -= (unsigned char) p;
+			}	/* for */
+		}		/* else */
+	}
+	/* if */
+	frame->curpix = 0;
+	frame->curlinepix = 0;
+	frame->grabstate = FRAME_DONE;
+	stv680->framecount++;
+	stv680->readcount++;
+	if (stv680->frame[(stv680->curframe + 1) & (STV680_NUMFRAMES - 1)].grabstate == FRAME_READY) {
+		stv680->curframe = (stv680->curframe + 1) & (STV680_NUMFRAMES - 1);
+	}
+
+}				/* bayer_unshuffle */
+
+/*******  end routines from the pencam program  *********/
+
+static int stv680_newframe (struct usb_stv *stv680, int framenr)
+{
+	int errors = 0;
+
+	while (stv680->streaming && (stv680->frame[framenr].grabstate == FRAME_READY || stv680->frame[framenr].grabstate == FRAME_GRABBING)) {
+		if (!stv680->frame[framenr].curpix) {
+			errors++;
+		}
+		wait_event_interruptible (stv680->wq, (stv680->scratch[stv680->scratch_use].state == BUFFER_READY));
+
+		if (stv680->nullpackets > STV680_MAX_NULLPACKETS) {
+			stv680->nullpackets = 0;
+			PDEBUG (2, "STV(i): too many null length packets, restarting capture");
+			stv680_stop_stream (stv680);
+			stv680_start_stream (stv680);
+		} else {
+			if (stv680->scratch[stv680->scratch_use].state != BUFFER_READY) {
+				stv680->frame[framenr].grabstate = FRAME_ERROR;
+				PDEBUG (2, "STV(e): FRAME_ERROR in _newframe");
+				return -EIO;
+			}
+			stv680->scratch[stv680->scratch_use].state = BUFFER_BUSY;
+
+			bayer_unshuffle (stv680, &stv680->scratch[stv680->scratch_use]);
+
+			stv680->scratch[stv680->scratch_use].state = BUFFER_UNUSED;
+			stv680->scratch_use++;
+			if (stv680->scratch_use >= STV680_NUMSCRATCH)
+				stv680->scratch_use = 0;
+			if (errors > STV680_MAX_ERRORS) {
+				errors = 0;
+				PDEBUG (2, "STV(i): too many errors, restarting capture");
+				stv680_stop_stream (stv680);
+				stv680_start_stream (stv680);
+			}
+		}		/* else */
+	}			/* while */
+	return 0;
+}
+
+/*********************************************************************
+ * Video4Linux
+ *********************************************************************/
+
+static int stv_open (struct inode *inode, struct file *file)
+{
+	struct video_device *dev = video_devdata(file);
+	struct usb_stv *stv680 = video_get_drvdata(dev);
+	int err = 0;
+
+	/* we are called with the BKL held */
+	stv680->user = 1;
+	err = stv_init (stv680);	/* main initialization routine for camera */
+
+	if (err >= 0) {
+		stv680->fbuf = rvmalloc (stv680->maxframesize * STV680_NUMFRAMES);
+		if (!stv680->fbuf) {
+			PDEBUG (0, "STV(e): Could not rvmalloc frame bufer");
+			err = -ENOMEM;
+		}
+		file->private_data = dev;
+	}
+	if (err)
+		stv680->user = 0;
+
+	return err;
+}
+
+static int stv_close (struct inode *inode, struct file *file)
+{
+	struct video_device *dev = file->private_data;
+	struct usb_stv *stv680 = video_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < STV680_NUMFRAMES; i++)
+		stv680->frame[i].grabstate = FRAME_UNUSED;
+	if (stv680->streaming)
+		stv680_stop_stream (stv680);
+
+	if ((i = stv_stop_video (stv680)) < 0)
+		PDEBUG (1, "STV(e): stop_video failed in stv_close");
+
+	rvfree (stv680->fbuf, stv680->maxframesize * STV680_NUMFRAMES);
+	stv680->user = 0;
+
+	if (stv680->removed) {
+		kfree(stv680);
+		stv680 = NULL;
+		PDEBUG (0, "STV(i): device unregistered");
+	}
+	file->private_data = NULL;
+	return 0;
+}
+
+static int stv680_do_ioctl (struct inode *inode, struct file *file,
+			    unsigned int cmd, void *arg)
+{
+	struct video_device *vdev = file->private_data;
+	struct usb_stv *stv680 = video_get_drvdata(vdev);
+
+	if (!stv680->udev)
+		return -EIO;
+
+	switch (cmd) {
+	case VIDIOCGCAP:{
+			struct video_capability *b = arg;
+
+			strcpy (b->name, stv680->camera_name);
+			b->type = VID_TYPE_CAPTURE;
+			b->channels = 1;
+			b->audios = 0;
+			b->maxwidth = stv680->maxwidth;
+			b->maxheight = stv680->maxheight;
+			b->minwidth = stv680->maxwidth / 2;
+			b->minheight = stv680->maxheight / 2;
+			return 0;
+		}
+	case VIDIOCGCHAN:{
+			struct video_channel *v = arg;
+
+			if (v->channel != 0)
+				return -EINVAL;
+			v->flags = 0;
+			v->tuners = 0;
+			v->type = VIDEO_TYPE_CAMERA;
+			strcpy (v->name, "STV Camera");
+			return 0;
+		}
+	case VIDIOCSCHAN:{
+			struct video_channel *v = arg;
+			if (v->channel != 0)
+				return -EINVAL;
+			return 0;
+		}
+	case VIDIOCGPICT:{
+			struct video_picture *p = arg;
+
+			stv680_get_pict (stv680, p);
+			return 0;
+		}
+	case VIDIOCSPICT:{
+			struct video_picture *p = arg;
+
+			if (stv680_set_pict (stv680, p))
+				return -EINVAL;
+			return 0;
+		}
+	case VIDIOCSWIN:{
+			struct video_window *vw = arg;
+
+			if (vw->flags)
+				return -EINVAL;
+			if (vw->clipcount)
+				return -EINVAL;
+			if (vw->width != stv680->vwidth) {
+				if (stv680_set_size (stv680, vw->width, vw->height)) {
+					PDEBUG (2, "STV(e): failed (from user) set size in VIDIOCSWIN");
+					return -EINVAL;
+				}
+			}
+			return 0;
+		}
+	case VIDIOCGWIN:{
+			struct video_window *vw = arg;
+
+			vw->x = 0;	/* FIXME */
+			vw->y = 0;
+			vw->chromakey = 0;
+			vw->flags = 0;
+			vw->clipcount = 0;
+			vw->width = stv680->vwidth;
+			vw->height = stv680->vheight;
+			return 0;
+		}
+	case VIDIOCGMBUF:{
+			struct video_mbuf *vm = arg;
+			int i;
+
+			memset (vm, 0, sizeof (*vm));
+			vm->size = STV680_NUMFRAMES * stv680->maxframesize;
+			vm->frames = STV680_NUMFRAMES;
+			for (i = 0; i < STV680_NUMFRAMES; i++)
+				vm->offsets[i] = stv680->maxframesize * i;
+			return 0;
+		}
+	case VIDIOCMCAPTURE:{
+			struct video_mmap *vm = arg;
+
+			if (vm->format != STV_VIDEO_PALETTE) {
+				PDEBUG (2, "STV(i): VIDIOCMCAPTURE vm.format (%i) != VIDEO_PALETTE (%i)",
+					vm->format, STV_VIDEO_PALETTE);
+				if ((vm->format == 3) && (swapRGB_on == 0))  {
+					PDEBUG (2, "STV(i): VIDIOCMCAPTURE swapRGB is (auto) ON");
+					/* this may fix those apps (e.g., xawtv) that want BGR */
+					swapRGB = 1;
+				}
+				return -EINVAL;
+			}
+			if (vm->frame >= STV680_NUMFRAMES) {
+				PDEBUG (2, "STV(e): VIDIOCMCAPTURE vm.frame > NUMFRAMES");
+				return -EINVAL;
+			}
+			if ((stv680->frame[vm->frame].grabstate == FRAME_ERROR)
+			    || (stv680->frame[vm->frame].grabstate == FRAME_GRABBING)) {
+				PDEBUG (2, "STV(e): VIDIOCMCAPTURE grabstate (%i) error",
+					stv680->frame[vm->frame].grabstate);
+				return -EBUSY;
+			}
+			/* Is this according to the v4l spec??? */
+			if (stv680->vwidth != vm->width) {
+				if (stv680_set_size (stv680, vm->width, vm->height)) {
+					PDEBUG (2, "STV(e): VIDIOCMCAPTURE set_size failed");
+					return -EINVAL;
+				}
+			}
+			stv680->frame[vm->frame].grabstate = FRAME_READY;
+
+			if (!stv680->streaming)
+				stv680_start_stream (stv680);
+
+			return 0;
+		}
+	case VIDIOCSYNC:{
+			int *frame = arg;
+			int ret = 0;
+
+			if (*frame < 0 || *frame >= STV680_NUMFRAMES) {
+				PDEBUG (2, "STV(e): Bad frame # in VIDIOCSYNC");
+				return -EINVAL;
+			}
+			ret = stv680_newframe (stv680, *frame);
+			stv680->frame[*frame].grabstate = FRAME_UNUSED;
+			return ret;
+		}
+	case VIDIOCGFBUF:{
+			struct video_buffer *vb = arg;
+
+			memset (vb, 0, sizeof (*vb));
+			return 0;
+		}
+	case VIDIOCKEY:
+		return 0;
+	case VIDIOCCAPTURE:
+		{
+			PDEBUG (2, "STV(e): VIDIOCCAPTURE failed");
+			return -EINVAL;
+		}
+	case VIDIOCSFBUF:
+	case VIDIOCGTUNER:
+	case VIDIOCSTUNER:
+	case VIDIOCGFREQ:
+	case VIDIOCSFREQ:
+	case VIDIOCGAUDIO:
+	case VIDIOCSAUDIO:
+		return -EINVAL;
+	default:
+		return -ENOIOCTLCMD;
+	}			/* end switch */
+
+	return 0;
+}
+
+static int stv680_ioctl(struct inode *inode, struct file *file,
+			unsigned int cmd, unsigned long arg)
+{
+	return video_usercopy(inode, file, cmd, arg, stv680_do_ioctl);
+}
+
+static int stv680_mmap (struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *dev = file->private_data;
+	struct usb_stv *stv680 = video_get_drvdata(dev);
+	unsigned long start = vma->vm_start;
+	unsigned long size  = vma->vm_end-vma->vm_start;
+	unsigned long page, pos;
+
+	mutex_lock(&stv680->lock);
+
+	if (stv680->udev == NULL) {
+		mutex_unlock(&stv680->lock);
+		return -EIO;
+	}
+	if (size > (((STV680_NUMFRAMES * stv680->maxframesize) + PAGE_SIZE - 1)
+		    & ~(PAGE_SIZE - 1))) {
+		mutex_unlock(&stv680->lock);
+		return -EINVAL;
+	}
+	pos = (unsigned long) stv680->fbuf;
+	while (size > 0) {
+		page = vmalloc_to_pfn((void *)pos);
+		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
+			mutex_unlock(&stv680->lock);
+			return -EAGAIN;
+		}
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		if (size > PAGE_SIZE)
+			size -= PAGE_SIZE;
+		else
+			size = 0;
+	}
+	mutex_unlock(&stv680->lock);
+
+	return 0;
+}
+
+static ssize_t stv680_read (struct file *file, char __user *buf,
+			size_t count, loff_t *ppos)
+{
+	struct video_device *dev = file->private_data;
+	unsigned long int realcount = count;
+	int ret = 0;
+	struct usb_stv *stv680 = video_get_drvdata(dev);
+	unsigned long int i;
+
+	if (STV680_NUMFRAMES != 2) {
+		PDEBUG (0, "STV(e): STV680_NUMFRAMES needs to be 2!");
+		return -1;
+	}
+	if (stv680->udev == NULL)
+		return -EIO;
+	if (realcount > (stv680->vwidth * stv680->vheight * 3))
+		realcount = stv680->vwidth * stv680->vheight * 3;
+
+	/* Shouldn't happen: */
+	if (stv680->frame[0].grabstate == FRAME_GRABBING) {
+		PDEBUG (2, "STV(e): FRAME_GRABBING in stv680_read");
+		return -EBUSY;
+	}
+	stv680->frame[0].grabstate = FRAME_READY;
+	stv680->frame[1].grabstate = FRAME_UNUSED;
+	stv680->curframe = 0;
+
+	if (!stv680->streaming)
+		stv680_start_stream (stv680);
+
+	if (!stv680->streaming) {
+		ret = stv680_newframe (stv680, 0);	/* ret should = 0 */
+	}
+
+	ret = stv680_newframe (stv680, 0);
+
+	if (!ret) {
+		if ((i = copy_to_user (buf, stv680->frame[0].data, realcount)) != 0) {
+			PDEBUG (2, "STV(e): copy_to_user frame 0 failed, ret count = %li", i);
+			return -EFAULT;
+		}
+	} else {
+		realcount = ret;
+	}
+	stv680->frame[0].grabstate = FRAME_UNUSED;
+	return realcount;
+}				/* stv680_read */
+
+static struct file_operations stv680_fops = {
+	.owner =	THIS_MODULE,
+	.open =		stv_open,
+	.release =     	stv_close,
+	.read =		stv680_read,
+	.mmap =		stv680_mmap,
+	.ioctl =        stv680_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.llseek =       no_llseek,
+};
+static struct video_device stv680_template = {
+	.owner =	THIS_MODULE,
+	.name =		"STV0680 USB camera",
+	.type =		VID_TYPE_CAPTURE,
+	.hardware =	VID_HARDWARE_SE401,
+	.fops =         &stv680_fops,
+	.release =	video_device_release,
+	.minor = 	-1,
+};
+
+static int stv680_probe (struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *interface;
+	struct usb_stv *stv680 = NULL;
+	char *camera_name = NULL;
+	int retval = 0;
+
+	/* We don't handle multi-config cameras */
+	if (dev->descriptor.bNumConfigurations != 1) {
+		PDEBUG (0, "STV(e): Number of Configurations != 1");
+		return -ENODEV;
+	}
+
+	interface = &intf->altsetting[0];
+	/* Is it a STV680? */
+	if ((le16_to_cpu(dev->descriptor.idVendor) == USB_PENCAM_VENDOR_ID) &&
+	    (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) {
+		camera_name = "STV0680";
+		PDEBUG (0, "STV(i): STV0680 camera found.");
+	} else if ((le16_to_cpu(dev->descriptor.idVendor) == USB_CREATIVEGOMINI_VENDOR_ID) &&
+		   (le16_to_cpu(dev->descriptor.idProduct) == USB_CREATIVEGOMINI_PRODUCT_ID)) {
+		camera_name = "Creative WebCam Go Mini";
+		PDEBUG (0, "STV(i): Creative WebCam Go Mini found.");
+	} else {
+		PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 or Creative WebCam Go Mini values.");
+		PDEBUG (0, "STV(e): Check that the STV0680 or Creative WebCam Go Mini camera is connected to the computer.");
+		retval = -ENODEV;
+		goto error;
+	}
+	/* We found one */
+	if ((stv680 = kzalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) {
+		PDEBUG (0, "STV(e): couldn't kmalloc stv680 struct.");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	stv680->udev = dev;
+	stv680->camera_name = camera_name;
+
+	stv680->vdev = video_device_alloc();
+	if (!stv680->vdev) {
+		retval = -ENOMEM;
+		goto error;
+	}
+	memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template));
+	stv680->vdev->dev = &intf->dev;
+	video_set_drvdata(stv680->vdev, stv680);
+
+	memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name));
+	init_waitqueue_head (&stv680->wq);
+	mutex_init (&stv680->lock);
+	wmb ();
+
+	if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+		PDEBUG (0, "STV(e): video_register_device failed");
+		retval = -EIO;
+		goto error_vdev;
+	}
+	PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor);
+
+	usb_set_intfdata (intf, stv680);
+	stv680_create_sysfs_files(stv680->vdev);
+	return 0;
+
+error_vdev:
+	video_device_release(stv680->vdev);
+error:
+	kfree(stv680);
+	return retval;
+}
+
+static inline void usb_stv680_remove_disconnected (struct usb_stv *stv680)
+{
+	int i;
+
+	stv680->udev = NULL;
+	stv680->frame[0].grabstate = FRAME_ERROR;
+	stv680->frame[1].grabstate = FRAME_ERROR;
+	stv680->streaming = 0;
+
+	wake_up_interruptible (&stv680->wq);
+
+	for (i = 0; i < STV680_NUMSBUF; i++)
+		if (stv680->urb[i]) {
+			usb_kill_urb (stv680->urb[i]);
+			usb_free_urb (stv680->urb[i]);
+			stv680->urb[i] = NULL;
+			kfree(stv680->sbuf[i].data);
+		}
+	for (i = 0; i < STV680_NUMSCRATCH; i++)
+		kfree(stv680->scratch[i].data);
+	PDEBUG (0, "STV(i): %s disconnected", stv680->camera_name);
+
+	/* Free the memory */
+	kfree(stv680);
+}
+
+static void stv680_disconnect (struct usb_interface *intf)
+{
+	struct usb_stv *stv680 = usb_get_intfdata (intf);
+
+	usb_set_intfdata (intf, NULL);
+
+	if (stv680) {
+		/* We don't want people trying to open up the device */
+		if (stv680->vdev) {
+			stv680_remove_sysfs_files(stv680->vdev);
+			video_unregister_device(stv680->vdev);
+			stv680->vdev = NULL;
+		}
+		if (!stv680->user) {
+			usb_stv680_remove_disconnected (stv680);
+		} else {
+			stv680->removed = 1;
+		}
+	}
+}
+
+static struct usb_driver stv680_driver = {
+	.name =		"stv680",
+	.probe =	stv680_probe,
+	.disconnect =	stv680_disconnect,
+	.id_table =	device_table
+};
+
+/********************************************************************
+ *  Module routines
+ ********************************************************************/
+
+static int __init usb_stv680_init (void)
+{
+	if (usb_register (&stv680_driver) < 0) {
+		PDEBUG (0, "STV(e): Could not setup STV0680 driver");
+		return -1;
+	}
+	PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION);
+
+	info(DRIVER_DESC " " DRIVER_VERSION);
+	return 0;
+}
+
+static void __exit usb_stv680_exit (void)
+{
+	usb_deregister (&stv680_driver);
+	PDEBUG (0, "STV(i): driver deregistered");
+}
+
+module_init (usb_stv680_init);
+module_exit (usb_stv680_exit);
diff --git a/drivers/media/video/stv680.h b/drivers/media/video/stv680.h
new file mode 100644
index 000000000000..a08f1b08a4b0
--- /dev/null
+++ b/drivers/media/video/stv680.h
@@ -0,0 +1,227 @@
+/****************************************************************************
+ *
+ *  Filename: stv680.h
+ *
+ *  Description:
+ *     This is a USB driver for STV0680 based usb video cameras.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ ****************************************************************************/
+
+/* size of usb transfers */
+#define STV680_PACKETSIZE	4096
+
+/* number of queued bulk transfers to use, may have problems if > 1 */
+#define STV680_NUMSBUF		1
+
+/* number of frames supported by the v4l part */
+#define STV680_NUMFRAMES	2
+
+/* scratch buffers for passing data to the decoders: 2 or 4 are good */
+#define STV680_NUMSCRATCH	2
+
+/* number of nul sized packets to receive before kicking the camera */
+#define STV680_MAX_NULLPACKETS	200
+
+/* number of decoding errors before kicking the camera */
+#define STV680_MAX_ERRORS	100
+
+#define USB_PENCAM_VENDOR_ID	0x0553
+#define USB_PENCAM_PRODUCT_ID	0x0202
+
+#define USB_CREATIVEGOMINI_VENDOR_ID	0x041e
+#define USB_CREATIVEGOMINI_PRODUCT_ID	0x4007
+
+#define PENCAM_TIMEOUT          1000
+/* fmt 4 */
+#define STV_VIDEO_PALETTE       VIDEO_PALETTE_RGB24
+
+static struct usb_device_id device_table[] = {
+	{USB_DEVICE (USB_PENCAM_VENDOR_ID, USB_PENCAM_PRODUCT_ID)},
+	{USB_DEVICE (USB_CREATIVEGOMINI_VENDOR_ID, USB_CREATIVEGOMINI_PRODUCT_ID)},
+	{}
+};
+MODULE_DEVICE_TABLE (usb, device_table);
+
+struct stv680_sbuf {
+	unsigned char *data;
+};
+
+enum {
+	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
+	FRAME_READY,		/* Ready to start grabbing */
+	FRAME_GRABBING,		/* In the process of being grabbed into */
+	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
+	FRAME_ERROR,		/* Something bad happened while processing */
+};
+
+enum {
+	BUFFER_UNUSED,
+	BUFFER_READY,
+	BUFFER_BUSY,
+	BUFFER_DONE,
+};
+
+/* raw camera data <- sbuf (urb transfer buf) */
+struct stv680_scratch {
+	unsigned char *data;
+	volatile int state;
+	int offset;
+	int length;
+};
+
+/* processed data for display ends up here, after bayer */
+struct stv680_frame {
+	unsigned char *data;	/* Frame buffer */
+	volatile int grabstate;	/* State of grabbing */
+	unsigned char *curline;
+	int curlinepix;
+	int curpix;
+};
+
+/* this is almost the video structure uvd_t, with extra parameters for stv */
+struct usb_stv {
+	struct video_device *vdev;
+
+	struct usb_device *udev;
+
+	unsigned char bulk_in_endpointAddr;	/* __u8  the address of the bulk in endpoint */
+	char *camera_name;
+
+	unsigned int VideoMode;	/* 0x0100 = VGA, 0x0000 = CIF, 0x0300 = QVGA */
+	int SupportedModes;
+	int CIF;
+	int VGA;
+	int QVGA;
+	int cwidth;		/* camera width */
+	int cheight;		/* camera height */
+	int maxwidth;		/* max video width */
+	int maxheight;		/* max video height */
+	int vwidth;		/* current width for video window */
+	int vheight;		/* current height for video window */
+	unsigned long int rawbufsize;
+	unsigned long int maxframesize;	/* rawbufsize * 3 for RGB */
+
+	int origGain;
+	int origMode;		/* original camera mode */
+
+	struct mutex lock;	/* to lock the structure */
+	int user;		/* user count for exclusive use */
+	int removed;		/* device disconnected */
+	int streaming;		/* Are we streaming video? */
+	char *fbuf;		/* Videodev buffer area */
+	struct urb *urb[STV680_NUMSBUF];	/* # of queued bulk transfers */
+	int curframe;		/* Current receiving frame */
+	struct stv680_frame frame[STV680_NUMFRAMES];	/* # frames supported by v4l part */
+	int readcount;
+	int framecount;
+	int error;
+	int dropped;
+	int scratch_next;
+	int scratch_use;
+	int scratch_overflow;
+	struct stv680_scratch scratch[STV680_NUMSCRATCH];	/* for decoders */
+	struct stv680_sbuf sbuf[STV680_NUMSBUF];
+
+	unsigned int brightness;
+	unsigned int chgbright;
+	unsigned int whiteness;
+	unsigned int colour;
+	unsigned int contrast;
+	unsigned int hue;
+	unsigned int palette;
+	unsigned int depth;	/* rgb24 in bits */
+
+	wait_queue_head_t wq;	/* Processes waiting */
+
+	int nullpackets;
+};
+
+
+static const unsigned char red[256] = {
+	0, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18,
+	18, 18, 18, 18, 18, 18, 18, 25, 30, 35, 38, 42,
+	44, 47, 50, 53, 54, 57, 59, 61, 63, 65, 67, 69,
+	71, 71, 73, 75, 77, 78, 80, 81, 82, 84, 85, 87,
+	88, 89, 90, 91, 93, 94, 95, 97, 98, 98, 99, 101,
+	102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,
+	114, 115, 116, 116, 117, 118, 119, 120, 121, 122, 123, 124,
+	125, 125, 126, 127, 128, 129, 129, 130, 131, 132, 133, 134,
+	134, 135, 135, 136, 137, 138, 139, 140, 140, 141, 142, 143,
+	143, 143, 144, 145, 146, 147, 147, 148, 149, 150, 150, 151,
+	152, 152, 152, 153, 154, 154, 155, 156, 157, 157, 158, 159,
+	159, 160, 161, 161, 161, 162, 163, 163, 164, 165, 165, 166,
+	167, 167, 168, 168, 169, 170, 170, 170, 171, 171, 172, 173,
+	173, 174, 174, 175, 176, 176, 177, 178, 178, 179, 179, 179,
+	180, 180, 181, 181, 182, 183, 183, 184, 184, 185, 185, 186,
+	187, 187, 188, 188, 188, 188, 189, 190, 190, 191, 191, 192,
+	192, 193, 193, 194, 195, 195, 196, 196, 197, 197, 197, 197,
+	198, 198, 199, 199, 200, 201, 201, 202, 202, 203, 203, 204,
+	204, 205, 205, 206, 206, 206, 206, 207, 207, 208, 208, 209,
+	209, 210, 210, 211, 211, 212, 212, 213, 213, 214, 214, 215,
+	215, 215, 215, 216, 216, 217, 217, 218, 218, 218, 219, 219,
+	220, 220, 221, 221
+};
+
+static const unsigned char green[256] = {
+	0, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21,
+	21, 21, 21, 21, 21, 21, 21, 28, 34, 39, 43, 47,
+	50, 53, 56, 59, 61, 64, 66, 68, 71, 73, 75, 77,
+	79, 80, 82, 84, 86, 87, 89, 91, 92, 94, 95, 97,
+	98, 100, 101, 102, 104, 105, 106, 108, 109, 110, 111, 113,
+	114, 115, 116, 117, 118, 120, 121, 122, 123, 124, 125, 126,
+	127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138,
+	139, 140, 141, 142, 143, 144, 144, 145, 146, 147, 148, 149,
+	150, 151, 151, 152, 153, 154, 155, 156, 156, 157, 158, 159,
+	160, 160, 161, 162, 163, 164, 164, 165, 166, 167, 167, 168,
+	169, 170, 170, 171, 172, 172, 173, 174, 175, 175, 176, 177,
+	177, 178, 179, 179, 180, 181, 182, 182, 183, 184, 184, 185,
+	186, 186, 187, 187, 188, 189, 189, 190, 191, 191, 192, 193,
+	193, 194, 194, 195, 196, 196, 197, 198, 198, 199, 199, 200,
+	201, 201, 202, 202, 203, 204, 204, 205, 205, 206, 206, 207,
+	208, 208, 209, 209, 210, 210, 211, 212, 212, 213, 213, 214,
+	214, 215, 215, 216, 217, 217, 218, 218, 219, 219, 220, 220,
+	221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
+	227, 228, 228, 229, 229, 230, 230, 231, 231, 232, 232, 233,
+	233, 234, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239,
+	239, 240, 240, 241, 241, 242, 242, 243, 243, 243, 244, 244,
+	245, 245, 246, 246
+};
+
+static const unsigned char blue[256] = {
+	0, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,
+	23, 23, 23, 23, 23, 23, 23, 30, 37, 42, 47, 51,
+	55, 58, 61, 64, 67, 70, 72, 74, 78, 80, 82, 84,
+	86, 88, 90, 92, 94, 95, 97, 100, 101, 103, 104, 106,
+	107, 110, 111, 112, 114, 115, 116, 118, 119, 121, 122, 124,
+	125, 126, 127, 128, 129, 132, 133, 134, 135, 136, 137, 138,
+	139, 140, 141, 143, 144, 145, 146, 147, 148, 149, 150, 151,
+	152, 154, 155, 156, 157, 158, 158, 159, 160, 161, 162, 163,
+	165, 166, 166, 167, 168, 169, 170, 171, 171, 172, 173, 174,
+	176, 176, 177, 178, 179, 180, 180, 181, 182, 183, 183, 184,
+	185, 187, 187, 188, 189, 189, 190, 191, 192, 192, 193, 194,
+	194, 195, 196, 196, 198, 199, 200, 200, 201, 202, 202, 203,
+	204, 204, 205, 205, 206, 207, 207, 209, 210, 210, 211, 212,
+	212, 213, 213, 214, 215, 215, 216, 217, 217, 218, 218, 220,
+	221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
+	228, 228, 229, 229, 231, 231, 232, 233, 233, 234, 234, 235,
+	235, 236, 236, 237, 238, 238, 239, 239, 240, 240, 242, 242,
+	243, 243, 244, 244, 245, 246, 246, 247, 247, 248, 248, 249,
+	249, 250, 250, 251, 251, 253, 253, 254, 254, 255, 255, 255,
+	255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
+	255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
+	255, 255, 255, 255
+};
diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c
index fc3d5824efff..78e043ac9ea0 100644
--- a/drivers/media/video/tda7432.c
+++ b/drivers/media/video/tda7432.c
@@ -48,9 +48,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include "bttv.h"
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
+#include <media/i2c-addr.h>
 
 #ifndef VIDEO_AUDIO_BALANCE
 # define VIDEO_AUDIO_BALANCE 32
@@ -71,7 +70,7 @@ module_param(maxvol, int, S_IRUGO | S_IWUSR);
 
 /* Address to scan (I2C address of this chip) */
 static unsigned short normal_i2c[] = {
-	I2C_TDA7432 >> 1,
+	I2C_ADDR_TDA7432 >> 1,
 	I2C_CLIENT_END,
 };
 I2C_CLIENT_INSMOD;
diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c
index 0243700f58ae..ef494febb5e4 100644
--- a/drivers/media/video/tda9840.c
+++ b/drivers/media/video/tda9840.c
@@ -35,7 +35,7 @@ static int debug = 0;		/* insmod parameter */
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 #define dprintk(args...) \
-            do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
+	    do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
 
 #define	SWITCH		0x00
 #define	LEVEL_ADJUST	0x02
@@ -43,7 +43,7 @@ MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 #define	TEST		0x04
 
 /* addresses to scan, found only at 0x42 (7-Bit) */
-static unsigned short normal_i2c[] = { I2C_TDA9840, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END };
 
 /* magic definition of all other variables and things */
 I2C_CLIENT_INSMOD;
diff --git a/drivers/media/video/tda9840.h b/drivers/media/video/tda9840.h
index 28021053bd09..7da8432cdca7 100644
--- a/drivers/media/video/tda9840.h
+++ b/drivers/media/video/tda9840.h
@@ -1,7 +1,7 @@
 #ifndef __INCLUDED_TDA9840__
 #define __INCLUDED_TDA9840__
 
-#define	I2C_TDA9840		0x42
+#define	I2C_ADDR_TDA9840		0x42
 
 #define TDA9840_DETECT		_IOR('v',1,int)
 /* return values for TDA9840_DETCT */
diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c
index ef98c4982250..103ccb919292 100644
--- a/drivers/media/video/tda9875.c
+++ b/drivers/media/video/tda9875.c
@@ -30,24 +30,22 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/init.h>
 
-#include "bttv.h"
-#include <media/audiochip.h>
+
+#include <media/i2c-addr.h>
 
 static int debug; /* insmod parameter */
 module_param(debug, int, S_IRUGO | S_IWUSR);
 MODULE_LICENSE("GPL");
 
-
 /* Addresses to scan */
 static unsigned short normal_i2c[] =  {
-    I2C_TDA9875 >> 1,
+    I2C_ADDR_TDA9875 >> 1,
     I2C_CLIENT_END
 };
 I2C_CLIENT_INSMOD;
 
 /* This is a superset of the TDA9875 */
 struct tda9875 {
-	int mode;
 	int rvol, lvol;
 	int bass, treble;
 	struct i2c_client c;
@@ -197,7 +195,6 @@ static void do_tda9875_init(struct i2c_client *client)
 
 	tda9875_write(client, TDA9875_MUT, 0xcc );   /* General mute  */
 
-	t->mode=AUDIO_UNMUTE;
 	t->lvol=t->rvol =0;  	/* 0dB */
 	t->bass=0; 			/* 0dB */
 	t->treble=0;  		/* 0dB */
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index 774ed0dbc56d..523df0b8cc63 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -37,7 +37,7 @@ static int debug = 0;		/* insmod parameter */
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 #define dprintk(args...) \
-            do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
+	    do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
 
 #define TEA6415C_NUM_INPUTS	8
 #define TEA6415C_NUM_OUTPUTS	6
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index ad7d2872cfbf..e0ff811fab6f 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -37,10 +37,10 @@ static int debug = 0;		/* insmod parameter */
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 #define dprintk(args...) \
-            do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
+	    do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
 
 /* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */
-static unsigned short normal_i2c[] = { I2C_TEA6420_1, I2C_TEA6420_2, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I2C_CLIENT_END };
 
 /* magic definition of all other variables and things */
 I2C_CLIENT_INSMOD;
diff --git a/drivers/media/video/tea6420.h b/drivers/media/video/tea6420.h
index ea664df15ad4..5ef7c18e0c54 100644
--- a/drivers/media/video/tea6420.h
+++ b/drivers/media/video/tea6420.h
@@ -2,8 +2,8 @@
 #define __INCLUDED_TEA6420__
 
 /* possible addresses */
-#define	I2C_TEA6420_1		0x4c
-#define	I2C_TEA6420_2		0x4d
+#define	I2C_ADDR_TEA6420_1		0x4c
+#define	I2C_ADDR_TEA6420_2		0x4d
 
 struct tea6420_multiplex
 {
diff --git a/drivers/media/video/tuner-3036.c b/drivers/media/video/tuner-3036.c
index c4a78e7a5a58..74ab48c09c6a 100644
--- a/drivers/media/video/tuner-3036.c
+++ b/drivers/media/video/tuner-3036.c
@@ -5,7 +5,7 @@
  *
  * The SAB3036 is just about different enough from the chips that
  * tuner.c copes with to make it not worth the effort to crowbar
- * the support into that file.  So instead we have a separate driver. 
+ * the support into that file.  So instead we have a separate driver.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -56,15 +56,15 @@ tuner_getstatus (struct i2c_client *c)
 
 #define TUNER_FL        0x80
 
-static int 
+static int
 tuner_islocked (struct i2c_client *c)
 {
-        return (tuner_getstatus(c) & TUNER_FL);
+	return (tuner_getstatus(c) & TUNER_FL);
 }
 
 /* ---------------------------------------------------------------------- */
 
-static void 
+static void
 set_tv_freq(struct i2c_client *c, int freq)
 {
 	u16 div = ((freq * 20) / 16);
@@ -73,26 +73,26 @@ set_tv_freq(struct i2c_client *c, int freq)
 
 	if (debug)
 		printk(KERN_DEBUG "tuner: setting frequency %dMHz, divisor %x\n", freq / 16, div);
-	
+
 	/* Select high tuning current */
 	buffer[0] = 0x29;
 	buffer[1] = 0x3e;
 
 	if (i2c_master_send(c, buffer, 2) != 2)
 		printk("tuner: i2c i/o error 1\n");
-	
+
 	buffer[0] = 0x80 | ((div>>8) & 0x7f);
 	buffer[1] = div & 0xff;
 
 	if (i2c_master_send(c, buffer, 2) != 2)
 		printk("tuner: i2c i/o error 2\n");
-	
+
 	while (!tuner_islocked(c) && time_before(jiffies, give_up))
 		schedule();
-	       
+
 	if (!tuner_islocked(c))
 		printk(KERN_WARNING "tuner: failed to achieve PLL lock\n");
-	
+
 	/* Select low tuning current and engage AFC */
 	buffer[0] = 0x29;
 	buffer[1] = 0xb2;
@@ -106,7 +106,7 @@ set_tv_freq(struct i2c_client *c, int freq)
 
 /* ---------------------------------------------------------------------- */
 
-static int 
+static int
 tuner_attach(struct i2c_adapter *adap, int addr, int kind)
 {
 	static unsigned char buffer[] = { 0x29, 0x32, 0x2a, 0, 0x2b, 0 };
@@ -116,18 +116,18 @@ tuner_attach(struct i2c_adapter *adap, int addr, int kind)
 	if (this_adap > 0)
 		return -1;
 	this_adap++;
-	
-        client_template.adapter = adap;
-        client_template.addr = addr;
+
+	client_template.adapter = adap;
+	client_template.addr = addr;
 
 	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-        if (client == NULL)
-                return -ENOMEM;
-        memcpy(client, &client_template, sizeof(struct i2c_client));
+	if (client == NULL)
+		return -ENOMEM;
+	memcpy(client, &client_template, sizeof(struct i2c_client));
 
 	printk("tuner: SAB3036 found, status %02x\n", tuner_getstatus(client));
 
-        i2c_attach_client(client);
+	i2c_attach_client(client);
 
 	if (i2c_master_send(client, buffer, 2) != 2)
 		printk("tuner: i2c i/o error 1\n");
@@ -138,30 +138,30 @@ tuner_attach(struct i2c_adapter *adap, int addr, int kind)
 	return 0;
 }
 
-static int 
+static int
 tuner_detach(struct i2c_client *c)
 {
 	return 0;
 }
 
-static int 
+static int
 tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 {
 	int *iarg = (int*)arg;
 
-	switch (cmd) 
+	switch (cmd)
 	{
 		case VIDIOCSFREQ:
 			set_tv_freq(client, *iarg);
 			break;
-	    
+
 		default:
 			return -EINVAL;
 	}
 	return 0;
 }
 
-static int 
+static int
 tuner_probe(struct i2c_adapter *adap)
 {
 	this_adap = 0;
@@ -172,8 +172,8 @@ tuner_probe(struct i2c_adapter *adap)
 
 /* ----------------------------------------------------------------------- */
 
-static struct i2c_driver 
-i2c_driver_tuner = 
+static struct i2c_driver
+i2c_driver_tuner =
 {
 	.driver = {
 		.name	=	"sab3036",
@@ -186,7 +186,7 @@ i2c_driver_tuner =
 
 static struct i2c_client client_template =
 {
-        .driver		= &i2c_driver_tuner,
+	.driver		= &i2c_driver_tuner,
 	.name		= "SAB3036",
 };
 
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 32e1849441fb..df195c905366 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -21,7 +21,6 @@
 
 #include <media/tuner.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
 
 #define UNSET (-1U)
 
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index 4efb01bb44ac..356bff455ad1 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -30,10 +30,10 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 
-#include <media/audiochip.h>
+#include <media/tvaudio.h>
 #include <media/v4l2-common.h>
 
-#include "tvaudio.h"
+#include <media/i2c-addr.h>
 
 /* ---------------------------------------------------------------------- */
 /* insmod args                                                            */
@@ -102,7 +102,7 @@ struct CHIPDESC {
 
 	/* input switch register + values for v4l inputs */
 	int  inputreg;
-	int  inputmap[8];
+	int  inputmap[4];
 	int  inputmute;
 	int  inputmask;
 };
@@ -119,9 +119,10 @@ struct CHIPSTATE {
 	audiocmd   shadow;
 
 	/* current settings */
-	__u16 left,right,treble,bass,mode;
+	__u16 left,right,treble,bass,muted,mode;
 	int prevmode;
 	int radio;
+	int input;
 
 	/* thread */
 	pid_t                tpid;
@@ -137,14 +138,14 @@ struct CHIPSTATE {
 /* i2c addresses                                                          */
 
 static unsigned short normal_i2c[] = {
-	I2C_TDA8425   >> 1,
-	I2C_TEA6300   >> 1,
-	I2C_TEA6420   >> 1,
-	I2C_TDA9840   >> 1,
-	I2C_TDA985x_L >> 1,
-	I2C_TDA985x_H >> 1,
-	I2C_TDA9874   >> 1,
-	I2C_PIC16C54  >> 1,
+	I2C_ADDR_TDA8425   >> 1,
+	I2C_ADDR_TEA6300   >> 1,
+	I2C_ADDR_TEA6420   >> 1,
+	I2C_ADDR_TDA9840   >> 1,
+	I2C_ADDR_TDA985x_L >> 1,
+	I2C_ADDR_TDA985x_H >> 1,
+	I2C_ADDR_TDA9874   >> 1,
+	I2C_ADDR_PIC16C54  >> 1,
 	I2C_CLIENT_END };
 I2C_CLIENT_INSMOD;
 
@@ -1101,9 +1102,8 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; }
 static int tda8425_initialize(struct CHIPSTATE *chip)
 {
 	struct CHIPDESC *desc = chiplist + chip->type;
-	int inputmap[8] = { /* tuner	*/ TDA8425_S1_CH2, /* radio  */ TDA8425_S1_CH1,
-			    /* extern	*/ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF,
-			    /* off	*/ TDA8425_S1_OFF, /* on     */ TDA8425_S1_CH2};
+	int inputmap[4] = { /* tuner	*/ TDA8425_S1_CH2, /* radio  */ TDA8425_S1_CH1,
+			    /* extern	*/ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF};
 
 	if (chip->c.adapter->id == I2C_HW_B_RIVA) {
 		memcpy (desc->inputmap, inputmap, sizeof (inputmap));
@@ -1269,8 +1269,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tda9840",
 		.id         = I2C_DRIVERID_TDA9840,
 		.insmodopt  = &tda9840,
-		.addr_lo    = I2C_TDA9840 >> 1,
-		.addr_hi    = I2C_TDA9840 >> 1,
+		.addr_lo    = I2C_ADDR_TDA9840 >> 1,
+		.addr_hi    = I2C_ADDR_TDA9840 >> 1,
 		.registers  = 5,
 
 		.checkit    = tda9840_checkit,
@@ -1286,8 +1286,8 @@ static struct CHIPDESC chiplist[] = {
 		.id         = I2C_DRIVERID_TDA9873,
 		.checkit    = tda9873_checkit,
 		.insmodopt  = &tda9873,
-		.addr_lo    = I2C_TDA985x_L >> 1,
-		.addr_hi    = I2C_TDA985x_H >> 1,
+		.addr_lo    = I2C_ADDR_TDA985x_L >> 1,
+		.addr_hi    = I2C_ADDR_TDA985x_H >> 1,
 		.registers  = 3,
 		.flags      = CHIP_HAS_INPUTSEL,
 
@@ -1298,7 +1298,7 @@ static struct CHIPDESC chiplist[] = {
 		.init       = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } },
 		.inputreg   = TDA9873_SW,
 		.inputmute  = TDA9873_MUTE | TDA9873_AUTOMUTE,
-		.inputmap   = {0xa0, 0xa2, 0xa0, 0xa0, 0xc0},
+		.inputmap   = {0xa0, 0xa2, 0xa0, 0xa0},
 		.inputmask  = TDA9873_INP_MASK|TDA9873_MUTE|TDA9873_AUTOMUTE,
 
 	},
@@ -1308,8 +1308,8 @@ static struct CHIPDESC chiplist[] = {
 		.checkit    = tda9874a_checkit,
 		.initialize = tda9874a_initialize,
 		.insmodopt  = &tda9874a,
-		.addr_lo    = I2C_TDA9874 >> 1,
-		.addr_hi    = I2C_TDA9874 >> 1,
+		.addr_lo    = I2C_ADDR_TDA9874 >> 1,
+		.addr_hi    = I2C_ADDR_TDA9874 >> 1,
 
 		.getmode    = tda9874a_getmode,
 		.setmode    = tda9874a_setmode,
@@ -1319,8 +1319,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tda9850",
 		.id         = I2C_DRIVERID_TDA9850,
 		.insmodopt  = &tda9850,
-		.addr_lo    = I2C_TDA985x_L >> 1,
-		.addr_hi    = I2C_TDA985x_H >> 1,
+		.addr_lo    = I2C_ADDR_TDA985x_L >> 1,
+		.addr_hi    = I2C_ADDR_TDA985x_H >> 1,
 		.registers  = 11,
 
 		.getmode    = tda985x_getmode,
@@ -1332,8 +1332,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tda9855",
 		.id         = I2C_DRIVERID_TDA9855,
 		.insmodopt  = &tda9855,
-		.addr_lo    = I2C_TDA985x_L >> 1,
-		.addr_hi    = I2C_TDA985x_H >> 1,
+		.addr_lo    = I2C_ADDR_TDA985x_L >> 1,
+		.addr_hi    = I2C_ADDR_TDA985x_H >> 1,
 		.registers  = 11,
 		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE,
 
@@ -1357,8 +1357,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tea6300",
 		.id         = I2C_DRIVERID_TEA6300,
 		.insmodopt  = &tea6300,
-		.addr_lo    = I2C_TEA6300 >> 1,
-		.addr_hi    = I2C_TEA6300 >> 1,
+		.addr_lo    = I2C_ADDR_TEA6300 >> 1,
+		.addr_hi    = I2C_ADDR_TEA6300 >> 1,
 		.registers  = 6,
 		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
 
@@ -1379,8 +1379,8 @@ static struct CHIPDESC chiplist[] = {
 		.id         = I2C_DRIVERID_TEA6300,
 		.initialize = tea6320_initialize,
 		.insmodopt  = &tea6320,
-		.addr_lo    = I2C_TEA6300 >> 1,
-		.addr_hi    = I2C_TEA6300 >> 1,
+		.addr_lo    = I2C_ADDR_TEA6300 >> 1,
+		.addr_hi    = I2C_ADDR_TEA6300 >> 1,
 		.registers  = 8,
 		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
 
@@ -1400,8 +1400,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tea6420",
 		.id         = I2C_DRIVERID_TEA6420,
 		.insmodopt  = &tea6420,
-		.addr_lo    = I2C_TEA6420 >> 1,
-		.addr_hi    = I2C_TEA6420 >> 1,
+		.addr_lo    = I2C_ADDR_TEA6420 >> 1,
+		.addr_hi    = I2C_ADDR_TEA6420 >> 1,
 		.registers  = 1,
 		.flags      = CHIP_HAS_INPUTSEL,
 
@@ -1413,8 +1413,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "tda8425",
 		.id         = I2C_DRIVERID_TDA8425,
 		.insmodopt  = &tda8425,
-		.addr_lo    = I2C_TDA8425 >> 1,
-		.addr_hi    = I2C_TDA8425 >> 1,
+		.addr_lo    = I2C_ADDR_TDA8425 >> 1,
+		.addr_hi    = I2C_ADDR_TDA8425 >> 1,
 		.registers  = 9,
 		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
 
@@ -1437,8 +1437,8 @@ static struct CHIPDESC chiplist[] = {
 		.name       = "pic16c54 (PV951)",
 		.id         = I2C_DRIVERID_PIC16C54_PV9,
 		.insmodopt  = &pic16c54,
-		.addr_lo    = I2C_PIC16C54 >> 1,
-		.addr_hi    = I2C_PIC16C54>> 1,
+		.addr_lo    = I2C_ADDR_PIC16C54 >> 1,
+		.addr_hi    = I2C_ADDR_PIC16C54>> 1,
 		.registers  = 2,
 		.flags      = CHIP_HAS_INPUTSEL,
 
@@ -1446,8 +1446,7 @@ static struct CHIPDESC chiplist[] = {
 		.inputmap   = {PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_TUNER,
 			     PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE,
 			     PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE,
-			     PIC16C54_MISC_SND_MUTE,PIC16C54_MISC_SND_MUTE,
-			     PIC16C54_MISC_SND_NOTMUTE},
+			     PIC16C54_MISC_SND_MUTE},
 		.inputmute  = PIC16C54_MISC_SND_MUTE,
 	},
 	{
@@ -1456,8 +1455,8 @@ static struct CHIPDESC chiplist[] = {
 		/*.id         = I2C_DRIVERID_TA8874Z, */
 		.checkit    = ta8874z_checkit,
 		.insmodopt  = &ta8874z,
-		.addr_lo    = I2C_TDA9840 >> 1,
-		.addr_hi    = I2C_TDA9840 >> 1,
+		.addr_lo    = I2C_ADDR_TDA9840 >> 1,
+		.addr_hi    = I2C_ADDR_TDA9840 >> 1,
 		.registers  = 2,
 
 		.getmode    = ta8874z_getmode,
@@ -1583,28 +1582,40 @@ static int chip_detach(struct i2c_client *client)
 	return 0;
 }
 
+static int tvaudio_set_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl)
+{
+	struct CHIPDESC *desc = chiplist + chip->type;
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (ctrl->value < 0 || ctrl->value >= 2)
+			return -ERANGE;
+		chip->muted = ctrl->value;
+		if (chip->muted)
+			chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask);
+		else
+			chip_write_masked(chip,desc->inputreg,
+					desc->inputmap[chip->input],desc->inputmask);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
 /* ---------------------------------------------------------------------- */
 /* video4linux interface                                                  */
 
 static int chip_command(struct i2c_client *client,
 			unsigned int cmd, void *arg)
 {
-	__u16 *sarg = arg;
 	struct CHIPSTATE *chip = i2c_get_clientdata(client);
 	struct CHIPDESC  *desc = chiplist + chip->type;
 
 	v4l_dbg(1, debug, &chip->c, "%s: chip_command 0x%x\n", chip->c.name, cmd);
 
 	switch (cmd) {
-	case AUDC_SET_INPUT:
-		if (desc->flags & CHIP_HAS_INPUTSEL) {
-			if (*sarg & 0x80)
-				chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask);
-			else
-				chip_write_masked(chip,desc->inputreg,desc->inputmap[*sarg],desc->inputmask);
-		}
-		break;
-
 	case AUDC_SET_RADIO:
 		chip->radio = 1;
 		chip->watch_stereo = 0;
@@ -1668,6 +1679,48 @@ static int chip_command(struct i2c_client *client,
 		break;
 	}
 
+	case VIDIOC_S_CTRL:
+		return tvaudio_set_ctrl(chip, arg);
+
+	case VIDIOC_INT_G_AUDIO_ROUTING:
+	{
+		struct v4l2_routing *rt = arg;
+
+		rt->input = chip->input;
+		rt->output = 0;
+		break;
+	}
+
+	case VIDIOC_INT_S_AUDIO_ROUTING:
+	{
+		struct v4l2_routing *rt = arg;
+
+		if (!(desc->flags & CHIP_HAS_INPUTSEL) || rt->input >= 4)
+				return -EINVAL;
+		/* There are four inputs: tuner, radio, extern and intern. */
+		chip->input = rt->input;
+		if (chip->muted)
+			break;
+		chip_write_masked(chip, desc->inputreg,
+				desc->inputmap[chip->input], desc->inputmask);
+		break;
+	}
+
+	case VIDIOC_S_AUDIO:
+	{
+		struct v4l2_audio *sarg = arg;
+
+		if (!(desc->flags & CHIP_HAS_INPUTSEL) || sarg->index >= 4)
+				return -EINVAL;
+		/* There are four inputs: tuner, radio, extern and intern. */
+		chip->input = sarg->index;
+		if (chip->muted)
+			break;
+		chip_write_masked(chip, desc->inputreg,
+				desc->inputmap[chip->input], desc->inputmask);
+		break;
+	}
+
 	case VIDIOC_S_TUNER:
 	{
 		struct v4l2_tuner *vt = arg;
@@ -1680,6 +1733,7 @@ static int chip_command(struct i2c_client *client,
 			mode = VIDEO_SOUND_MONO;
 			break;
 		case V4L2_TUNER_MODE_STEREO:
+		case V4L2_TUNER_MODE_LANG1_LANG2:
 			mode = VIDEO_SOUND_STEREO;
 			break;
 		case V4L2_TUNER_MODE_LANG1:
diff --git a/drivers/media/video/tvaudio.h b/drivers/media/video/tvaudio.h
deleted file mode 100644
index af7e116af9a9..000000000000
--- a/drivers/media/video/tvaudio.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * i2c bus addresses for the chips supported by tvaudio.c
- */
-
-#define I2C_TDA8425        0x82
-#define I2C_TDA9840        0x84 /* also used by TA8874Z */
-#define I2C_TDA985x_L      0xb4 /* also used by 9873 */
-#define I2C_TDA985x_H      0xb6
-#define I2C_TDA9874        0xb0 /* also used by 9875 */
-
-#define I2C_TEA6300        0x80 /* also used by 6320 */
-#define I2C_TEA6420	   0x98
-
-#define I2C_PIC16C54       0x96 /* PV951 */
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 582551b0969b..e0d2ff83fc91 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -248,32 +248,32 @@ audioIC[] =
 	{AUDIO_CHIP_MSP34XX,  "MSP3410D"},
 	{AUDIO_CHIP_MSP34XX,  "MSP3415"},
 	{AUDIO_CHIP_MSP34XX,  "MSP3430"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3438"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3438"},
 	{AUDIO_CHIP_UNKNOWN,  "CS5331"},
 	/* 10-14 */
 	{AUDIO_CHIP_MSP34XX,  "MSP3435"},
 	{AUDIO_CHIP_MSP34XX,  "MSP3440"},
 	{AUDIO_CHIP_MSP34XX,  "MSP3445"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3411"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3416"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3411"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3416"},
 	/* 15-19 */
 	{AUDIO_CHIP_MSP34XX,  "MSP3425"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3451"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3418"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3451"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3418"},
 	{AUDIO_CHIP_UNKNOWN,  "Type 0x12"},
 	{AUDIO_CHIP_UNKNOWN,  "OKI7716"},
 	/* 20-24 */
-	{AUDIO_CHIP_UNKNOWN,  "MSP4410"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4420"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4440"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4450"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4408"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4410"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4420"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4440"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4450"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4408"},
 	/* 25-29 */
-	{AUDIO_CHIP_UNKNOWN,  "MSP4418"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4428"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4448"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4458"},
-	{AUDIO_CHIP_UNKNOWN,  "Type 0x1d"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4418"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4428"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4448"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4458"},
+	{AUDIO_CHIP_MSP34XX,  "Type 0x1d"},
 	/* 30-34 */
 	{AUDIO_CHIP_INTERNAL, "CX880"},
 	{AUDIO_CHIP_INTERNAL, "CX881"},
diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile
new file mode 100644
index 000000000000..ed410a5ee8c9
--- /dev/null
+++ b/drivers/media/video/usbvideo/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_USB_IBMCAM)        += ibmcam.o usbvideo.o ultracam.o
+obj-$(CONFIG_USB_KONICAWC)      += konicawc.o usbvideo.o
+obj-$(CONFIG_USB_VICAM)         += vicam.o usbvideo.o
+
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
new file mode 100644
index 000000000000..76f771b6a32f
--- /dev/null
+++ b/drivers/media/video/usbvideo/ibmcam.c
@@ -0,0 +1,3932 @@
+/*
+ * USB IBM C-It Video Camera driver
+ *
+ * Supports Xirlink C-It Video Camera, IBM PC Camera,
+ * IBM NetCamera and Veo Stingray.
+ *
+ * This driver is based on earlier work of:
+ *
+ * (C) Copyright 1999 Johannes Erdfelt
+ * (C) Copyright 1999 Randy Dunlap
+ *
+ * 5/24/00 Removed optional (and unnecessary) locking of the driver while
+ * the device remains plugged in. Corrected race conditions in ibmcam_open
+ * and ibmcam_probe() routines using this as a guideline:
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "usbvideo.h"
+
+#define IBMCAM_VENDOR_ID	0x0545
+#define IBMCAM_PRODUCT_ID	0x8080
+#define NETCAM_PRODUCT_ID	0x8002	/* IBM NetCamera, close to model 2 */
+#define VEO_800C_PRODUCT_ID	0x800C	/* Veo Stingray, repackaged Model 2 */
+#define VEO_800D_PRODUCT_ID	0x800D	/* Veo Stingray, repackaged Model 4 */
+
+#define MAX_IBMCAM		4	/* How many devices we allow to connect */
+#define USES_IBMCAM_PUTPIXEL    0       /* 0=Fast/oops 1=Slow/secure */
+
+/* Header signatures */
+
+/* Model 1 header: 00 FF 00 xx */
+#define HDRSIG_MODEL1_128x96	0x06	/* U Y V Y ... */
+#define HDRSIG_MODEL1_176x144	0x0e	/* U Y V Y ... */
+#define HDRSIG_MODEL1_352x288	0x00	/* V Y U Y ... */
+
+#define	IBMCAM_MODEL_1	1	/* XVP-501, 3 interfaces, rev. 0.02 */
+#define IBMCAM_MODEL_2	2	/* KSX-X9903, 2 interfaces, rev. 3.0a */
+#define IBMCAM_MODEL_3	3	/* KSX-X9902, 2 interfaces, rev. 3.01 */
+#define	IBMCAM_MODEL_4	4	/* IBM NetCamera, 0545/8002/3.0a */
+
+/* Video sizes supported */
+#define	VIDEOSIZE_128x96	VIDEOSIZE(128, 96)
+#define	VIDEOSIZE_176x144	VIDEOSIZE(176,144)
+#define	VIDEOSIZE_352x288	VIDEOSIZE(352,288)
+#define	VIDEOSIZE_320x240	VIDEOSIZE(320,240)
+#define	VIDEOSIZE_352x240	VIDEOSIZE(352,240)
+#define	VIDEOSIZE_640x480	VIDEOSIZE(640,480)
+#define	VIDEOSIZE_160x120	VIDEOSIZE(160,120)
+
+/* Video sizes supported */
+enum {
+	SIZE_128x96 = 0,
+	SIZE_160x120,
+	SIZE_176x144,
+	SIZE_320x240,
+	SIZE_352x240,
+	SIZE_352x288,
+	SIZE_640x480,
+	/* Add/remove/rearrange items before this line */
+	SIZE_LastItem
+};
+
+/*
+ * This structure lives in uvd->user field.
+ */
+typedef struct {
+	int initialized;	/* Had we already sent init sequence? */
+	int camera_model;	/* What type of IBM camera we got? */
+	int has_hdr;
+} ibmcam_t;
+#define	IBMCAM_T(uvd)	((ibmcam_t *)((uvd)->user_data))
+
+static struct usbvideo *cams;
+
+static int debug;
+
+static int flags; /* = FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */
+
+static const int min_canvasWidth  = 8;
+static const int min_canvasHeight = 4;
+
+static int lighting = 1; /* Medium */
+
+#define SHARPNESS_MIN	0
+#define SHARPNESS_MAX	6
+static int sharpness = 4; /* Low noise, good details */
+
+#define FRAMERATE_MIN	0
+#define FRAMERATE_MAX	6
+static int framerate = -1;
+
+static int size = SIZE_352x288;
+
+/*
+ * Here we define several initialization variables. They may
+ * be used to automatically set color, hue, brightness and
+ * contrast to desired values. This is particularly useful in
+ * case of webcams (which have no controls and no on-screen
+ * output) and also when a client V4L software is used that
+ * does not have some of those controls. In any case it's
+ * good to have startup values as options.
+ *
+ * These values are all in [0..255] range. This simplifies
+ * operation. Note that actual values of V4L variables may
+ * be scaled up (as much as << 8). User can see that only
+ * on overlay output, however, or through a V4L client.
+ */
+static int init_brightness = 128;
+static int init_contrast = 192;
+static int init_color = 128;
+static int init_hue = 128;
+static int hue_correction = 128;
+
+/* Settings for camera model 2 */
+static int init_model2_rg2 = -1;
+static int init_model2_sat = -1;
+static int init_model2_yb = -1;
+
+/* 01.01.08 - Added for RCA video in support -LO */
+/* Settings for camera model 3 */
+static int init_model3_input = 0;
+
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
+module_param(flags, int, 0);
+MODULE_PARM_DESC(flags, "Bitfield: 0=VIDIOCSYNC, 1=B/W, 2=show hints, 3=show stats, 4=test pattern, 5=separate frames, 6=clean frames");
+module_param(framerate, int, 0);
+MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)");
+module_param(lighting, int, 0);
+MODULE_PARM_DESC(lighting, "Photosensitivity: 0=bright, 1=medium (default), 2=low light");
+module_param(sharpness, int, 0);
+MODULE_PARM_DESC(sharpness, "Model1 noise reduction: 0=smooth, 6=sharp (default=4)");
+module_param(size, int, 0);
+MODULE_PARM_DESC(size, "Image size: 0=128x96 1=160x120 2=176x144 3=320x240 4=352x240 5=352x288 6=640x480  (default=5)");
+module_param(init_brightness, int, 0);
+MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)");
+module_param(init_contrast, int, 0);
+MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)");
+module_param(init_color, int, 0);
+MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)");
+module_param(init_hue, int, 0);
+MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)");
+module_param(hue_correction, int, 0);
+MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)");
+
+module_param(init_model2_rg2, int, 0);
+MODULE_PARM_DESC(init_model2_rg2, "Model2 preconfiguration: 0-255 (default=47)");
+module_param(init_model2_sat, int, 0);
+MODULE_PARM_DESC(init_model2_sat, "Model2 preconfiguration: 0-255 (default=52)");
+module_param(init_model2_yb, int, 0);
+MODULE_PARM_DESC(init_model2_yb, "Model2 preconfiguration: 0-255 (default=160)");
+
+/* 01.01.08 - Added for RCA video in support -LO */
+module_param(init_model3_input, int, 0);
+MODULE_PARM_DESC(init_model3_input, "Model3 input: 0=CCD 1=RCA");
+
+MODULE_AUTHOR ("Dmitri");
+MODULE_DESCRIPTION ("IBM/Xirlink C-it USB Camera Driver for Linux (c) 2000");
+MODULE_LICENSE("GPL");
+
+/* Still mysterious i2c commands */
+static const unsigned short unknown_88 = 0x0088;
+static const unsigned short unknown_89 = 0x0089;
+static const unsigned short bright_3x[3] = { 0x0031, 0x0032, 0x0033 };
+static const unsigned short contrast_14 = 0x0014;
+static const unsigned short light_27 = 0x0027;
+static const unsigned short sharp_13 = 0x0013;
+
+/* i2c commands for Model 2 cameras */
+static const unsigned short mod2_brightness = 0x001a;		/* $5b .. $ee; default=$5a */
+static const unsigned short mod2_set_framerate = 0x001c;	/* 0 (fast).. $1F (slow) */
+static const unsigned short mod2_color_balance_rg2 = 0x001e;	/* 0 (red) .. $7F (green) */
+static const unsigned short mod2_saturation = 0x0020;		/* 0 (b/w) - $7F (full color) */
+static const unsigned short mod2_color_balance_yb = 0x0022;	/* 0..$7F, $50 is about right */
+static const unsigned short mod2_hue = 0x0024;			/* 0..$7F, $70 is about right */
+static const unsigned short mod2_sensitivity = 0x0028;		/* 0 (min) .. $1F (max) */
+
+struct struct_initData {
+	unsigned char req;
+	unsigned short value;
+	unsigned short index;
+};
+
+/*
+ * ibmcam_size_to_videosize()
+ *
+ * This procedure converts module option 'size' into the actual
+ * videosize_t that defines the image size in pixels. We need
+ * simplified 'size' because user wants a simple enumerated list
+ * of choices, not an infinite set of possibilities.
+ */
+static videosize_t ibmcam_size_to_videosize(int size)
+{
+	videosize_t vs = VIDEOSIZE_352x288;
+	RESTRICT_TO_RANGE(size, 0, (SIZE_LastItem-1));
+	switch (size) {
+	case SIZE_128x96:
+		vs = VIDEOSIZE_128x96;
+		break;
+	case SIZE_160x120:
+		vs = VIDEOSIZE_160x120;
+		break;
+	case SIZE_176x144:
+		vs = VIDEOSIZE_176x144;
+		break;
+	case SIZE_320x240:
+		vs = VIDEOSIZE_320x240;
+		break;
+	case SIZE_352x240:
+		vs = VIDEOSIZE_352x240;
+		break;
+	case SIZE_352x288:
+		vs = VIDEOSIZE_352x288;
+		break;
+	case SIZE_640x480:
+		vs = VIDEOSIZE_640x480;
+		break;
+	default:
+		err("size=%d. is not valid", size);
+		break;
+	}
+	return vs;
+}
+
+/*
+ * ibmcam_find_header()
+ *
+ * Locate one of supported header markers in the queue.
+ * Once found, remove all preceding bytes AND the marker (4 bytes)
+ * from the data pump queue. Whatever follows must be video lines.
+ *
+ * History:
+ * 1/21/00  Created.
+ */
+static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame here */
+{
+	struct usbvideo_frame *frame;
+	ibmcam_t *icam;
+
+	if ((uvd->curframe) < 0 || (uvd->curframe >= USBVIDEO_NUMFRAMES)) {
+		err("ibmcam_find_header: Illegal frame %d.", uvd->curframe);
+		return scan_EndParse;
+	}
+	icam = IBMCAM_T(uvd);
+	assert(icam != NULL);
+	frame = &uvd->frame[uvd->curframe];
+	icam->has_hdr = 0;
+	switch (icam->camera_model) {
+	case IBMCAM_MODEL_1:
+	{
+		const int marker_len = 4;
+		while (RingQueue_GetLength(&uvd->dp) >= marker_len) {
+			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
+			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) &&
+			    (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00))
+			{
+#if 0				/* This code helps to detect new frame markers */
+				info("Header sig: 00 FF 00 %02X", RING_QUEUE_PEEK(&uvd->dp, 3));
+#endif
+				frame->header = RING_QUEUE_PEEK(&uvd->dp, 3);
+				if ((frame->header == HDRSIG_MODEL1_128x96) ||
+				    (frame->header == HDRSIG_MODEL1_176x144) ||
+				    (frame->header == HDRSIG_MODEL1_352x288))
+				{
+#if 0
+					info("Header found.");
+#endif
+					RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
+					icam->has_hdr = 1;
+					break;
+				}
+			}
+			/* If we are still here then this doesn't look like a header */
+			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
+		}
+		break;
+	}
+	case IBMCAM_MODEL_2:
+case IBMCAM_MODEL_4:
+	{
+		int marker_len = 0;
+		switch (uvd->videosize) {
+		case VIDEOSIZE_176x144:
+			marker_len = 10;
+			break;
+		default:
+			marker_len = 2;
+			break;
+		}
+		while (RingQueue_GetLength(&uvd->dp) >= marker_len) {
+			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
+			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF))
+			{
+#if 0
+				info("Header found.");
+#endif
+				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
+				icam->has_hdr = 1;
+				frame->header = HDRSIG_MODEL1_176x144;
+				break;
+			}
+			/* If we are still here then this doesn't look like a header */
+			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
+		}
+		break;
+	}
+	case IBMCAM_MODEL_3:
+	{	/*
+		 * Headers: (one precedes every frame). nc=no compression,
+		 * bq=best quality bf=best frame rate.
+		 *
+		 * 176x144: 00 FF 02 { 0A=nc CA=bq EA=bf }
+		 * 320x240: 00 FF 02 { 08=nc 28=bq 68=bf }
+		 * 640x480: 00 FF 03 { 08=nc 28=bq 68=bf }
+		 *
+		 * Bytes '00 FF' seem to indicate header. Other two bytes
+		 * encode the frame type. This is a set of bit fields that
+		 * encode image size, compression type etc. These fields
+		 * do NOT contain frame number because all frames carry
+		 * the same header.
+		 */
+		const int marker_len = 4;
+		while (RingQueue_GetLength(&uvd->dp) >= marker_len) {
+			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
+			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) &&
+			    (RING_QUEUE_PEEK(&uvd->dp, 2) != 0xFF))
+			{
+				/*
+				 * Combine 2 bytes of frame type into one
+				 * easy to use value
+				 */
+				unsigned long byte3, byte4;
+
+				byte3 = RING_QUEUE_PEEK(&uvd->dp, 2);
+				byte4 = RING_QUEUE_PEEK(&uvd->dp, 3);
+				frame->header = (byte3 << 8) | byte4;
+#if 0
+				info("Header found.");
+#endif
+				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
+				icam->has_hdr = 1;
+				break;
+			}
+			/* If we are still here then this doesn't look like a header */
+			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
+		}
+		break;
+	}
+	default:
+		break;
+	}
+	if (!icam->has_hdr) {
+		if (uvd->debug > 2)
+			info("Skipping frame, no header");
+		return scan_EndParse;
+	}
+
+	/* Header found */
+	icam->has_hdr = 1;
+	uvd->stats.header_count++;
+	frame->scanstate = ScanState_Lines;
+	frame->curline = 0;
+
+	if (flags & FLAGS_FORCE_TESTPATTERN) {
+		usbvideo_TestPattern(uvd, 1, 1);
+		return scan_NextFrame;
+	}
+	return scan_Continue;
+}
+
+/*
+ * ibmcam_parse_lines()
+ *
+ * Parse one line (interlaced) from the buffer, put
+ * decoded RGB value into the current frame buffer
+ * and add the written number of bytes (RGB) to
+ * the *pcopylen.
+ *
+ * History:
+ * 21-Jan-2000 Created.
+ * 12-Oct-2000 Reworked to reflect interlaced nature of the data.
+ */
+static enum ParseState ibmcam_parse_lines(
+	struct uvd *uvd,
+	struct usbvideo_frame *frame,
+	long *pcopylen)
+{
+	unsigned char *f;
+	ibmcam_t *icam;
+	unsigned int len, scanLength, scanHeight, order_uv, order_yc;
+	int v4l_linesize; /* V4L line offset */
+	const int hue_corr  = (uvd->vpic.hue - 0x8000) >> 10;	/* -32..+31 */
+	const int hue2_corr = (hue_correction - 128) / 4;		/* -32..+31 */
+	const int ccm = 128; /* Color correction median - see below */
+	int y, u, v, i, frame_done=0, color_corr;
+	static unsigned char lineBuffer[640*3];
+	unsigned const char *chromaLine, *lumaLine;
+
+	assert(uvd != NULL);
+	assert(frame != NULL);
+	icam = IBMCAM_T(uvd);
+	assert(icam != NULL);
+	color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
+	RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1);
+
+	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+
+	if (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_4) {
+		/* Model 4 frame markers do not carry image size identification */
+		switch (uvd->videosize) {
+		case VIDEOSIZE_128x96:
+		case VIDEOSIZE_160x120:
+		case VIDEOSIZE_176x144:
+			scanLength = VIDEOSIZE_X(uvd->videosize);
+			scanHeight = VIDEOSIZE_Y(uvd->videosize);
+			break;
+		default:
+			err("ibmcam_parse_lines: Wrong mode.");
+			return scan_Out;
+		}
+		order_yc = 1;	/* order_yc: true=Yc false=cY ('c'=either U or V) */
+		order_uv = 1;	/* Always true in this algorithm */
+	} else {
+		switch (frame->header) {
+		case HDRSIG_MODEL1_128x96:
+			scanLength = 128;
+			scanHeight = 96;
+			order_uv = 1;	/* U Y V Y ... */
+			break;
+		case HDRSIG_MODEL1_176x144:
+			scanLength = 176;
+			scanHeight = 144;
+			order_uv = 1;	/* U Y V Y ... */
+			break;
+		case HDRSIG_MODEL1_352x288:
+			scanLength = 352;
+			scanHeight = 288;
+			order_uv = 0;	/* Y V Y V ... */
+			break;
+		default:
+			err("Unknown header signature 00 FF 00 %02lX", frame->header);
+			return scan_NextFrame;
+		}
+		/* order_yc: true=Yc false=cY ('c'=either U or V) */
+		order_yc = (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_2);
+	}
+
+	len = scanLength * 3;
+	assert(len <= sizeof(lineBuffer));
+
+	/*
+	 * Lines are organized this way:
+	 *
+	 * I420:
+	 * ~~~~
+	 * <scanLength->
+	 * ___________________________________
+	 * |-----Y-----|---UVUVUV...UVUV-----| \
+	 * |-----------+---------------------|  \
+	 * |<-- 176 -->|<------ 176*2 ------>|  Total 72. lines (interlaced)
+	 * |...	   ... |        ...          |  /
+	 * |<-- 352 -->|<------ 352*2 ------>|  Total 144. lines (interlaced)
+	 * |___________|_____________________| /
+	 *  \           \
+	 *   lumaLine    chromaLine
+	 */
+
+	/* Make sure there's enough data for the entire line */
+	if (RingQueue_GetLength(&uvd->dp) < len)
+		return scan_Out;
+
+	/* Suck one line out of the ring queue */
+	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
+
+	/*
+	 * Make sure that our writing into output buffer
+	 * will not exceed the buffer. Mind that we may write
+	 * not into current output scanline but in several after
+	 * it as well (if we enlarge image vertically.)
+	 */
+	if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request))
+		return scan_NextFrame;
+
+	/*
+	 * Now we are sure that entire line (representing all 'scanLength'
+	 * pixels from the camera) is available in the buffer. We
+	 * start copying the line left-aligned to the V4L buffer.
+	 * If the camera line is shorter then we should pad the V4L
+	 * buffer with something (black) to complete the line.
+	 */
+	assert(frame->data != NULL);
+	f = frame->data + (v4l_linesize * frame->curline);
+
+	/*
+	 * To obtain chrominance data from the 'chromaLine' use this:
+	 *   v = chromaLine[0]; // 0-1:[0], 2-3:[4], 4-5:[8]...
+	 *   u = chromaLine[2]; // 0-1:[2], 2-3:[6], 4-5:[10]...
+	 *
+	 * Indices must be calculated this way:
+	 * v_index = (i >> 1) << 2;
+	 * u_index = (i >> 1) << 2 + 2;
+	 *
+	 * where 'i' is the column number [0..VIDEOSIZE_X(frame->request)-1]
+	 */
+	lumaLine = lineBuffer;
+	chromaLine = lineBuffer + scanLength;
+	for (i = 0; i < VIDEOSIZE_X(frame->request); i++)
+	{
+		unsigned char rv, gv, bv;	/* RGB components */
+
+		/* Check for various visual debugging hints (colorized pixels) */
+		if ((flags & FLAGS_DISPLAY_HINTS) && (icam->has_hdr)) {
+			/*
+			 * This is bad and should not happen. This means that
+			 * we somehow overshoot the line and encountered new
+			 * frame! Obviously our camera/V4L frame size is out
+			 * of whack. This cyan dot will help you to figure
+			 * out where exactly the new frame arrived.
+			 */
+			if (icam->has_hdr == 1) {
+				bv = 0; /* Yellow marker */
+				gv = 0xFF;
+				rv = 0xFF;
+			} else {
+				bv = 0xFF; /* Cyan marker */
+				gv = 0xFF;
+				rv = 0;
+			}
+			icam->has_hdr = 0;
+			goto make_pixel;
+		}
+
+		/*
+		 * Check if we are still in range. We may be out of range if our
+		 * V4L canvas is wider or taller than the camera "native" image.
+		 * Then we quickly fill the remainder of the line with zeros to
+		 * make black color and quit the horizontal scanning loop.
+		 */
+		if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
+			const int j = i * V4L_BYTES_PER_PIXEL;
+#if USES_IBMCAM_PUTPIXEL
+			/* Refresh 'f' because we don't use it much with PUTPIXEL */
+			f = frame->data + (v4l_linesize * frame->curline) + j;
+#endif
+			memset(f, 0, v4l_linesize - j);
+			break;
+		}
+
+		y = lumaLine[i];
+		if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */
+			rv = gv = bv = y;
+		else {
+			int off_0, off_2;
+
+			off_0 = (i >> 1) << 2;
+			off_2 = off_0 + 2;
+
+			if (order_yc) {
+				off_0++;
+				off_2++;
+			}
+			if (!order_uv) {
+				off_0 += 2;
+				off_2 -= 2;
+			}
+			u = chromaLine[off_0] + hue_corr;
+			v = chromaLine[off_2] + hue2_corr;
+
+			/* Apply color correction */
+			if (color_corr != 0) {
+				/* Magnify up to 2 times, reduce down to zero saturation */
+				u = 128 + ((ccm + color_corr) * (u - 128)) / ccm;
+				v = 128 + ((ccm + color_corr) * (v - 128)) / ccm;
+			}
+			YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv);
+		}
+
+	make_pixel:
+		/*
+		 * The purpose of creating the pixel here, in one,
+		 * dedicated place is that we may need to make the
+		 * pixel wider and taller than it actually is. This
+		 * may be used if camera generates small frames for
+		 * sake of frame rate (or any other reason.)
+		 *
+		 * The output data consists of B, G, R bytes
+		 * (in this order).
+		 */
+#if USES_IBMCAM_PUTPIXEL
+		RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv);
+#else
+		*f++ = bv;
+		*f++ = gv;
+		*f++ = rv;
+#endif
+		/*
+		 * Typically we do not decide within a legitimate frame
+		 * that we want to end the frame. However debugging code
+		 * may detect marker of new frame within the data. Then
+		 * this condition activates. The 'data' pointer is already
+		 * pointing at the new marker, so we'd better leave it as is.
+		 */
+		if (frame_done)
+			break;	/* End scanning of lines */
+	}
+	/*
+	 * Account for number of bytes that we wrote into output V4L frame.
+	 * We do it here, after we are done with the scanline, because we
+	 * may fill more than one output scanline if we do vertical
+	 * enlargement.
+	 */
+	frame->curline += 2;
+	if (pcopylen != NULL)
+		*pcopylen += 2 * v4l_linesize;
+	frame->deinterlace = Deinterlace_FillOddLines;
+
+	if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request)))
+		return scan_NextFrame;
+	else
+		return scan_Continue;
+}
+
+/*
+ * ibmcam_model2_320x240_parse_lines()
+ *
+ * This procedure deals with a weird RGB format that is produced by IBM
+ * camera model 2 in modes 320x240 and above; 'x' below is 159 or 175,
+ * depending on horizontal size of the picture:
+ *
+ * <--- 160 or 176 pairs of RA,RB bytes ----->
+ * *-----------------------------------------* \
+ * | RA0 | RB0 | RA1 | RB1 | ... | RAx | RBx |  \   This is pair of horizontal lines,
+ * |-----+-----+-----+-----+ ... +-----+-----|   *- or one interlaced line, total
+ * | B0  | G0  | B1  | G1  | ... | Bx  | Gx  |  /   120 or 144 such pairs which yield
+ * |=====+=====+=====+=====+ ... +=====+=====| /    240 or 288 lines after deinterlacing.
+ *
+ * Each group of FOUR bytes (RAi, RBi, Bi, Gi) where i=0..frame_width/2-1
+ * defines ONE pixel. Therefore this format yields 176x144 "decoded"
+ * resolution at best. I do not know why camera sends such format - the
+ * previous model (1) just used interlaced I420 and everyone was happy.
+ *
+ * I do not know what is the difference between RAi and RBi bytes. Both
+ * seemingly represent R component, but slightly vary in value (so that
+ * the picture looks a bit colored if one or another is used). I use
+ * them both as R component in attempt to at least partially recover the
+ * lost resolution.
+ */
+static enum ParseState ibmcam_model2_320x240_parse_lines(
+	struct uvd *uvd,
+	struct usbvideo_frame *frame,
+	long *pcopylen)
+{
+	unsigned char *f, *la, *lb;
+	unsigned int len;
+	int v4l_linesize; /* V4L line offset */
+	int i, j, frame_done=0, color_corr;
+	int scanLength, scanHeight;
+	static unsigned char lineBuffer[352*2];
+
+	switch (uvd->videosize) {
+	case VIDEOSIZE_320x240:
+	case VIDEOSIZE_352x240:
+	case VIDEOSIZE_352x288:
+		scanLength = VIDEOSIZE_X(uvd->videosize);
+		scanHeight = VIDEOSIZE_Y(uvd->videosize);
+		break;
+	default:
+		err("ibmcam_model2_320x240_parse_lines: Wrong mode.");
+		return scan_Out;
+	}
+
+	color_corr = (uvd->vpic.colour) >> 8; /* 0..+255 */
+	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+
+	len = scanLength * 2; /* See explanation above */
+	assert(len <= sizeof(lineBuffer));
+
+	/* Make sure there's enough data for the entire line */
+	if (RingQueue_GetLength(&uvd->dp) < len)
+		return scan_Out;
+
+	/* Suck one line out of the ring queue */
+	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
+
+	/*
+	 * Make sure that our writing into output buffer
+	 * will not exceed the buffer. Mind that we may write
+	 * not into current output scanline but in several after
+	 * it as well (if we enlarge image vertically.)
+	 */
+	if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request))
+		return scan_NextFrame;
+
+	la = lineBuffer;
+	lb = lineBuffer + scanLength;
+
+	/*
+	 * Now we are sure that entire line (representing all
+	 *         VIDEOSIZE_X(frame->request)
+	 * pixels from the camera) is available in the scratch buffer. We
+	 * start copying the line left-aligned to the V4L buffer (which
+	 * might be larger - not smaller, hopefully). If the camera
+	 * line is shorter then we should pad the V4L buffer with something
+	 * (black in this case) to complete the line.
+	 */
+	f = frame->data + (v4l_linesize * frame->curline);
+
+	/* Fill the 2-line strip */
+	for (i = 0; i < VIDEOSIZE_X(frame->request); i++) {
+		int y, rv, gv, bv;	/* RGB components */
+
+		j = i & (~1);
+
+		/* Check for various visual debugging hints (colorized pixels) */
+		if ((flags & FLAGS_DISPLAY_HINTS) && (IBMCAM_T(uvd)->has_hdr)) {
+			if (IBMCAM_T(uvd)->has_hdr == 1) {
+				bv = 0; /* Yellow marker */
+				gv = 0xFF;
+				rv = 0xFF;
+			} else {
+				bv = 0xFF; /* Cyan marker */
+				gv = 0xFF;
+				rv = 0;
+			}
+			IBMCAM_T(uvd)->has_hdr = 0;
+			goto make_pixel;
+		}
+
+		/*
+		 * Check if we are still in range. We may be out of range if our
+		 * V4L canvas is wider or taller than the camera "native" image.
+		 * Then we quickly fill the remainder of the line with zeros to
+		 * make black color and quit the horizontal scanning loop.
+		 */
+		if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
+			const int j = i * V4L_BYTES_PER_PIXEL;
+#if USES_IBMCAM_PUTPIXEL
+			/* Refresh 'f' because we don't use it much with PUTPIXEL */
+			f = frame->data + (v4l_linesize * frame->curline) + j;
+#endif
+			memset(f, 0, v4l_linesize - j);
+			break;
+		}
+
+		/*
+		 * Here I use RA and RB components, one per physical pixel.
+		 * This causes fine vertical grid on the picture but may improve
+		 * horizontal resolution. If you prefer replicating, use this:
+		 *   rv = la[j + 0];   ... or ... rv = la[j + 1];
+		 * then the pixel will be replicated.
+		 */
+		rv = la[i];
+		gv = lb[j + 1];
+		bv = lb[j + 0];
+
+		y = (rv + gv + bv) / 3; /* Brightness (badly calculated) */
+
+		if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */
+			rv = gv = bv = y;
+		else if (color_corr != 128) {
+
+			/* Calculate difference between color and brightness */
+			rv -= y;
+			gv -= y;
+			bv -= y;
+
+			/* Scale differences */
+			rv = (rv * color_corr) / 128;
+			gv = (gv * color_corr) / 128;
+			bv = (bv * color_corr) / 128;
+
+			/* Reapply brightness */
+			rv += y;
+			gv += y;
+			bv += y;
+
+			/* Watch for overflows */
+			RESTRICT_TO_RANGE(rv, 0, 255);
+			RESTRICT_TO_RANGE(gv, 0, 255);
+			RESTRICT_TO_RANGE(bv, 0, 255);
+		}
+
+	make_pixel:
+		RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv);
+	}
+	/*
+	 * Account for number of bytes that we wrote into output V4L frame.
+	 * We do it here, after we are done with the scanline, because we
+	 * may fill more than one output scanline if we do vertical
+	 * enlargement.
+	 */
+	frame->curline += 2;
+	*pcopylen += v4l_linesize * 2;
+	frame->deinterlace = Deinterlace_FillOddLines;
+
+	if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request)))
+		return scan_NextFrame;
+	else
+		return scan_Continue;
+}
+
+static enum ParseState ibmcam_model3_parse_lines(
+	struct uvd *uvd,
+	struct usbvideo_frame *frame,
+	long *pcopylen)
+{
+	unsigned char *data;
+	const unsigned char *color;
+	unsigned int len;
+	int v4l_linesize; /* V4L line offset */
+	const int hue_corr  = (uvd->vpic.hue - 0x8000) >> 10;	/* -32..+31 */
+	const int hue2_corr = (hue_correction - 128) / 4;		/* -32..+31 */
+	const int ccm = 128; /* Color correction median - see below */
+	int i, u, v, rw, data_w=0, data_h=0, color_corr;
+	static unsigned char lineBuffer[640*3];
+
+	color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
+	RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1);
+
+	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+
+	/* The header tells us what sort of data is in this frame */
+	switch (frame->header) {
+		/*
+		 * Uncompressed modes (that are easy to decode).
+		 */
+	case 0x0308:
+		data_w = 640;
+		data_h = 480;
+		break;
+	case 0x0208:
+		data_w = 320;
+		data_h = 240;
+		break;
+	case 0x020A:
+		data_w = 160;
+		data_h = 120;
+		break;
+		/*
+		 * Compressed modes (ViCE - that I don't know how to decode).
+		 */
+	case 0x0328:	/* 640x480, best quality compression */
+	case 0x0368:	/* 640x480, best frame rate compression */
+	case 0x0228:	/* 320x240, best quality compression */
+	case 0x0268:	/* 320x240, best frame rate compression */
+	case 0x02CA:	/* 160x120, best quality compression */
+	case 0x02EA:	/* 160x120, best frame rate compression */
+		/* Do nothing with this - not supported */
+		err("Unsupported mode $%04lx", frame->header);
+		return scan_NextFrame;
+	default:
+		/* Catch unknown headers, may help in learning new headers */
+		err("Strange frame->header=$%08lx", frame->header);
+		return scan_NextFrame;
+	}
+
+	/*
+	 * Make sure that our writing into output buffer
+	 * will not exceed the buffer. Note that we may write
+	 * not into current output scanline but in several after
+	 * it as well (if we enlarge image vertically.)
+	 */
+	if ((frame->curline + 1) >= data_h) {
+		if (uvd->debug >= 3)
+			info("Reached line %d. (frame is done)", frame->curline);
+		return scan_NextFrame;
+	}
+
+	/* Make sure there's enough data for the entire line */
+	len = 3 * data_w; /* <y-data> <uv-data> */
+	assert(len <= sizeof(lineBuffer));
+
+	/* Make sure there's enough data for the entire line */
+	if (RingQueue_GetLength(&uvd->dp) < len)
+		return scan_Out;
+
+	/* Suck one line out of the ring queue */
+	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
+
+	data = lineBuffer;
+	color = data + data_w;		/* Point to where color planes begin */
+
+	/* Bottom-to-top scanning */
+	rw = (int)VIDEOSIZE_Y(frame->request) - (int)(frame->curline) - 1;
+	RESTRICT_TO_RANGE(rw, 0, VIDEOSIZE_Y(frame->request)-1);
+
+	for (i = 0; i < VIDEOSIZE_X(frame->request); i++) {
+		int y, rv, gv, bv;	/* RGB components */
+
+		if (i < data_w) {
+			y = data[i];	/* Luminosity is the first line */
+
+			/* Apply static color correction */
+			u = color[i*2] + hue_corr;
+			v = color[i*2 + 1] + hue2_corr;
+
+			/* Apply color correction */
+			if (color_corr != 0) {
+				/* Magnify up to 2 times, reduce down to zero saturation */
+				u = 128 + ((ccm + color_corr) * (u - 128)) / ccm;
+				v = 128 + ((ccm + color_corr) * (v - 128)) / ccm;
+			}
+		} else
+			y = 0, u = v = 128;
+
+		YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv);
+		RGB24_PUTPIXEL(frame, i, rw, rv, gv, bv); /* Done by deinterlacing now */
+	}
+	frame->deinterlace = Deinterlace_FillEvenLines;
+
+	/*
+	 * Account for number of bytes that we wrote into output V4L frame.
+	 * We do it here, after we are done with the scanline, because we
+	 * may fill more than one output scanline if we do vertical
+	 * enlargement.
+	 */
+	frame->curline += 2;
+	*pcopylen += 2 * v4l_linesize;
+
+	if (frame->curline >= VIDEOSIZE_Y(frame->request)) {
+		if (uvd->debug >= 3) {
+			info("All requested lines (%ld.) done.",
+			     VIDEOSIZE_Y(frame->request));
+		}
+		return scan_NextFrame;
+	} else
+		return scan_Continue;
+}
+
+/*
+ * ibmcam_model4_128x96_parse_lines()
+ *
+ * This decoder is for one strange data format that is produced by Model 4
+ * camera only in 128x96 mode. This is RGB format and here is its description.
+ * First of all, this is non-interlaced stream, meaning that all scan lines
+ * are present in the datastream. There are 96 consecutive blocks of data
+ * that describe all 96 lines of the image. Each block is 5*128 bytes long
+ * and carries R, G, B components. The format of the block is shown in the
+ * code below. First 128*2 bytes are interleaved R and G components. Then
+ * we have a gap (junk data) 64 bytes long. Then follow B and something
+ * else, also interleaved (this makes another 128*2 bytes). After that
+ * probably another 64 bytes of junk follow.
+ *
+ * History:
+ * 10-Feb-2001 Created.
+ */
+static enum ParseState ibmcam_model4_128x96_parse_lines(
+	struct uvd *uvd,
+	struct usbvideo_frame *frame,
+	long *pcopylen)
+{
+	const unsigned char *data_rv, *data_gv, *data_bv;
+	unsigned int len;
+	int i, v4l_linesize; /* V4L line offset */
+	const int data_w=128, data_h=96;
+	static unsigned char lineBuffer[128*5];
+
+	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+
+	/*
+	 * Make sure that our writing into output buffer
+	 * will not exceed the buffer. Note that we may write
+	 * not into current output scanline but in several after
+	 * it as well (if we enlarge image vertically.)
+	 */
+	if ((frame->curline + 1) >= data_h) {
+		if (uvd->debug >= 3)
+			info("Reached line %d. (frame is done)", frame->curline);
+		return scan_NextFrame;
+	}
+
+	/*
+	 * RGRGRG .... RGRG_____________B?B?B? ... B?B?____________
+	 * <---- 128*2 ---><---- 64 ---><--- 128*2 ---><--- 64 --->
+	 */
+
+	/* Make sure there's enough data for the entire line */
+	len = 5 * data_w;
+	assert(len <= sizeof(lineBuffer));
+
+	/* Make sure there's enough data for the entire line */
+	if (RingQueue_GetLength(&uvd->dp) < len)
+		return scan_Out;
+
+	/* Suck one line out of the ring queue */
+	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
+
+	data_rv = lineBuffer;
+	data_gv = lineBuffer + 1;
+	data_bv = lineBuffer + data_w*2 + data_w/2;
+	for (i = 0; i < VIDEOSIZE_X(frame->request); i++) {
+		int rv, gv, bv;	/* RGB components */
+		if (i < data_w) {
+			const int j = i * 2;
+			gv = data_rv[j];
+			rv = data_gv[j];
+			bv = data_bv[j];
+			if (flags & FLAGS_MONOCHROME) {
+				unsigned long y;
+				y = rv + gv + bv;
+				y /= 3;
+				if (y > 0xFF)
+					y = 0xFF;
+				rv = gv = bv = (unsigned char) y;
+			}
+		} else {
+			rv = gv = bv = 0;
+		}
+		RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv);
+	}
+	frame->deinterlace = Deinterlace_None;
+	frame->curline++;
+	*pcopylen += v4l_linesize;
+
+	if (frame->curline >= VIDEOSIZE_Y(frame->request)) {
+		if (uvd->debug >= 3) {
+			info("All requested lines (%ld.) done.",
+			     VIDEOSIZE_Y(frame->request));
+		}
+		return scan_NextFrame;
+	} else
+		return scan_Continue;
+}
+
+/*
+ * ibmcam_ProcessIsocData()
+ *
+ * Generic routine to parse the ring queue data. It employs either
+ * ibmcam_find_header() or ibmcam_parse_lines() to do most
+ * of work.
+ *
+ * History:
+ * 1/21/00  Created.
+ */
+static void ibmcam_ProcessIsocData(struct uvd *uvd,
+				   struct usbvideo_frame *frame)
+{
+	enum ParseState newstate;
+	long copylen = 0;
+	int mod = IBMCAM_T(uvd)->camera_model;
+
+	while (1) {
+		newstate = scan_Out;
+		if (RingQueue_GetLength(&uvd->dp) > 0) {
+			if (frame->scanstate == ScanState_Scanning) {
+				newstate = ibmcam_find_header(uvd);
+			} else if (frame->scanstate == ScanState_Lines) {
+				if ((mod == IBMCAM_MODEL_2) &&
+				    ((uvd->videosize == VIDEOSIZE_352x288) ||
+				     (uvd->videosize == VIDEOSIZE_320x240) ||
+				     (uvd->videosize == VIDEOSIZE_352x240)))
+				{
+					newstate = ibmcam_model2_320x240_parse_lines(
+						uvd, frame, &copylen);
+				} else if (mod == IBMCAM_MODEL_4) {
+					/*
+					 * Model 4 cameras (IBM NetCamera) use Model 2 decoder (RGB)
+					 * for 320x240 and above; 160x120 and 176x144 uses Model 1
+					 * decoder (YUV), and 128x96 mode uses ???
+					 */
+					if ((uvd->videosize == VIDEOSIZE_352x288) ||
+					    (uvd->videosize == VIDEOSIZE_320x240) ||
+					    (uvd->videosize == VIDEOSIZE_352x240))
+					{
+						newstate = ibmcam_model2_320x240_parse_lines(uvd, frame, &copylen);
+					} else if (uvd->videosize == VIDEOSIZE_128x96) {
+						newstate = ibmcam_model4_128x96_parse_lines(uvd, frame, &copylen);
+					} else {
+						newstate = ibmcam_parse_lines(uvd, frame, &copylen);
+					}
+				} else if (mod == IBMCAM_MODEL_3) {
+					newstate = ibmcam_model3_parse_lines(uvd, frame, &copylen);
+				} else {
+					newstate = ibmcam_parse_lines(uvd, frame, &copylen);
+				}
+			}
+		}
+		if (newstate == scan_Continue)
+			continue;
+		else if ((newstate == scan_NextFrame) || (newstate == scan_Out))
+			break;
+		else
+			return; /* scan_EndParse */
+	}
+
+	if (newstate == scan_NextFrame) {
+		frame->frameState = FrameState_Done;
+		uvd->curframe = -1;
+		uvd->stats.frame_num++;
+		if ((mod == IBMCAM_MODEL_2) || (mod == IBMCAM_MODEL_4)) {
+			/* Need software contrast adjustment for those cameras */
+			frame->flags |= USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST;
+		}
+	}
+
+	/* Update the frame's uncompressed length. */
+	frame->seqRead_Length += copylen;
+
+#if 0
+	{
+		static unsigned char j=0;
+		memset(frame->data, j++, uvd->max_frame_size);
+		frame->frameState = FrameState_Ready;
+	}
+#endif
+}
+
+/*
+ * ibmcam_veio()
+ *
+ * History:
+ * 1/27/00  Added check for dev == NULL; this happens if camera is unplugged.
+ */
+static int ibmcam_veio(
+	struct uvd *uvd,
+	unsigned char req,
+	unsigned short value,
+	unsigned short index)
+{
+	static const char proc[] = "ibmcam_veio";
+	unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */;
+	int i;
+
+	if (!CAMERA_IS_OPERATIONAL(uvd))
+		return 0;
+
+	if (req == 1) {
+		i = usb_control_msg(
+			uvd->dev,
+			usb_rcvctrlpipe(uvd->dev, 0),
+			req,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
+			value,
+			index,
+			cp,
+			sizeof(cp),
+			1000);
+#if 0
+		info("USB => %02x%02x%02x%02x%02x%02x%02x%02x "
+		       "(req=$%02x val=$%04x ind=$%04x)",
+		       cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
+		       req, value, index);
+#endif
+	} else {
+		i = usb_control_msg(
+			uvd->dev,
+			usb_sndctrlpipe(uvd->dev, 0),
+			req,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
+			value,
+			index,
+			NULL,
+			0,
+			1000);
+	}
+	if (i < 0) {
+		err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.",
+		    proc, i);
+		uvd->last_error = i;
+	}
+	return i;
+}
+
+/*
+ * ibmcam_calculate_fps()
+ *
+ * This procedure roughly calculates the real frame rate based
+ * on FPS code (framerate=NNN option). Actual FPS differs
+ * slightly depending on lighting conditions, so that actual frame
+ * rate is determined by the camera. Since I don't know how to ask
+ * the camera what FPS is now I have to use the FPS code instead.
+ *
+ * The FPS code is in range [0..6], 0 is slowest, 6 is fastest.
+ * Corresponding real FPS should be in range [3..30] frames per second.
+ * The conversion formula is obvious:
+ *
+ * real_fps = 3 + (fps_code * 4.5)
+ *
+ * History:
+ * 1/18/00  Created.
+ */
+static int ibmcam_calculate_fps(struct uvd *uvd)
+{
+	return 3 + framerate*4 + framerate/2;
+}
+
+/*
+ * ibmcam_send_FF_04_02()
+ *
+ * This procedure sends magic 3-command prefix to the camera.
+ * The purpose of this prefix is not known.
+ *
+ * History:
+ * 1/2/00   Created.
+ */
+static void ibmcam_send_FF_04_02(struct uvd *uvd)
+{
+	ibmcam_veio(uvd, 0, 0x00FF, 0x0127);
+	ibmcam_veio(uvd, 0, 0x0004, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
+}
+
+static void ibmcam_send_00_04_06(struct uvd *uvd)
+{
+	ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+	ibmcam_veio(uvd, 0, 0x0004, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0006, 0x0124);
+}
+
+static void ibmcam_send_x_00(struct uvd *uvd, unsigned short x)
+{
+	ibmcam_veio(uvd, 0, x,      0x0127);
+	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
+}
+
+static void ibmcam_send_x_00_05(struct uvd *uvd, unsigned short x)
+{
+	ibmcam_send_x_00(uvd, x);
+	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
+}
+
+static void ibmcam_send_x_00_05_02(struct uvd *uvd, unsigned short x)
+{
+	ibmcam_veio(uvd, 0, x,      0x0127);
+	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
+}
+
+static void ibmcam_send_x_01_00_05(struct uvd *uvd, unsigned short x)
+{
+	ibmcam_veio(uvd, 0, x,      0x0127);
+	ibmcam_veio(uvd, 0, 0x0001, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
+}
+
+static void ibmcam_send_x_00_05_02_01(struct uvd *uvd, unsigned short x)
+{
+	ibmcam_veio(uvd, 0, x,      0x0127);
+	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0001, 0x0124);
+}
+
+static void ibmcam_send_x_00_05_02_08_01(struct uvd *uvd, unsigned short x)
+{
+	ibmcam_veio(uvd, 0, x,      0x0127);
+	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0008, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0001, 0x0124);
+}
+
+static void ibmcam_Packet_Format1(struct uvd *uvd, unsigned char fkey, unsigned char val)
+{
+	ibmcam_send_x_01_00_05(uvd, unknown_88);
+	ibmcam_send_x_00_05(uvd, fkey);
+	ibmcam_send_x_00_05_02_08_01(uvd, val);
+	ibmcam_send_x_00_05(uvd, unknown_88);
+	ibmcam_send_x_00_05_02_01(uvd, fkey);
+	ibmcam_send_x_00_05(uvd, unknown_89);
+	ibmcam_send_x_00(uvd, fkey);
+	ibmcam_send_00_04_06(uvd);
+	ibmcam_veio(uvd, 1, 0x0000, 0x0126);
+	ibmcam_send_FF_04_02(uvd);
+}
+
+static void ibmcam_PacketFormat2(struct uvd *uvd, unsigned char fkey, unsigned char val)
+{
+	ibmcam_send_x_01_00_05	(uvd, unknown_88);
+	ibmcam_send_x_00_05	(uvd, fkey);
+	ibmcam_send_x_00_05_02	(uvd, val);
+}
+
+static void ibmcam_model2_Packet2(struct uvd *uvd)
+{
+	ibmcam_veio(uvd, 0, 0x00ff, 0x012d);
+	ibmcam_veio(uvd, 0, 0xfea3, 0x0124);
+}
+
+static void ibmcam_model2_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2)
+{
+	ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+	ibmcam_veio(uvd, 0, 0x00ff, 0x012e);
+	ibmcam_veio(uvd, 0, v1,     0x012f);
+	ibmcam_veio(uvd, 0, 0x00ff, 0x0130);
+	ibmcam_veio(uvd, 0, 0xc719, 0x0124);
+	ibmcam_veio(uvd, 0, v2,     0x0127);
+
+	ibmcam_model2_Packet2(uvd);
+}
+
+/*
+ * ibmcam_model3_Packet1()
+ *
+ * 00_0078_012d
+ * 00_0097_012f
+ * 00_d141_0124
+ * 00_0096_0127
+ * 00_fea8_0124
+*/
+static void ibmcam_model3_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2)
+{
+	ibmcam_veio(uvd, 0, 0x0078, 0x012d);
+	ibmcam_veio(uvd, 0, v1,     0x012f);
+	ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+	ibmcam_veio(uvd, 0, v2,     0x0127);
+	ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+}
+
+static void ibmcam_model4_BrightnessPacket(struct uvd *uvd, int i)
+{
+	ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+	ibmcam_veio(uvd, 0, 0x0026, 0x012f);
+	ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+	ibmcam_veio(uvd, 0, i,      0x0127);
+	ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+	ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+	ibmcam_veio(uvd, 0, 0x0038, 0x012d);
+	ibmcam_veio(uvd, 0, 0x0004, 0x012f);
+	ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+	ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+}
+
+/*
+ * ibmcam_adjust_contrast()
+ *
+ * The contrast value changes from 0 (high contrast) to 15 (low contrast).
+ * This is in reverse to usual order of things (such as TV controls), so
+ * we reverse it again here.
+ *
+ * TODO: we probably don't need to send the setup 5 times...
+ *
+ * History:
+ * 1/2/00   Created.
+ */
+static void ibmcam_adjust_contrast(struct uvd *uvd)
+{
+	unsigned char a_contrast = uvd->vpic.contrast >> 12;
+	unsigned char new_contrast;
+
+	if (a_contrast >= 16)
+		a_contrast = 15;
+	new_contrast = 15 - a_contrast;
+	if (new_contrast == uvd->vpic_old.contrast)
+		return;
+	uvd->vpic_old.contrast = new_contrast;
+	switch (IBMCAM_T(uvd)->camera_model) {
+	case IBMCAM_MODEL_1:
+	{
+		const int ntries = 5;
+		int i;
+		for (i=0; i < ntries; i++) {
+			ibmcam_Packet_Format1(uvd, contrast_14, new_contrast);
+			ibmcam_send_FF_04_02(uvd);
+		}
+		break;
+	}
+	case IBMCAM_MODEL_2:
+	case IBMCAM_MODEL_4:
+		/* Models 2, 4 do not have this control; implemented in software. */
+		break;
+	case IBMCAM_MODEL_3:
+	{	/* Preset hardware values */
+		static const struct {
+			unsigned short cv1;
+			unsigned short cv2;
+			unsigned short cv3;
+		} cv[7] = {
+			{ 0x05, 0x05, 0x0f },	/* Minimum */
+			{ 0x04, 0x04, 0x16 },
+			{ 0x02, 0x03, 0x16 },
+			{ 0x02, 0x08, 0x16 },
+			{ 0x01, 0x0c, 0x16 },
+			{ 0x01, 0x0e, 0x16 },
+			{ 0x01, 0x10, 0x16 }	/* Maximum */
+		};
+		int i = a_contrast / 2;
+		RESTRICT_TO_RANGE(i, 0, 6);
+		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
+		ibmcam_model3_Packet1(uvd, 0x0067, cv[i].cv1);
+		ibmcam_model3_Packet1(uvd, 0x005b, cv[i].cv2);
+		ibmcam_model3_Packet1(uvd, 0x005c, cv[i].cv3);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
+		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
+		break;
+	}
+	default:
+		break;
+	}
+}
+
+/*
+ * ibmcam_change_lighting_conditions()
+ *
+ * Camera model 1:
+ * We have 3 levels of lighting conditions: 0=Bright, 1=Medium, 2=Low.
+ *
+ * Camera model 2:
+ * We have 16 levels of lighting, 0 for bright light and up to 15 for
+ * low light. But values above 5 or so are useless because camera is
+ * not really capable to produce anything worth viewing at such light.
+ * This setting may be altered only in certain camera state.
+ *
+ * Low lighting forces slower FPS. Lighting is set as a module parameter.
+ *
+ * History:
+ * 1/5/00   Created.
+ * 2/20/00  Added support for Model 2 cameras.
+ */
+static void ibmcam_change_lighting_conditions(struct uvd *uvd)
+{
+	static const char proc[] = "ibmcam_change_lighting_conditions";
+
+	if (debug > 0)
+		info("%s: Set lighting to %hu.", proc, lighting);
+
+	switch (IBMCAM_T(uvd)->camera_model) {
+	case IBMCAM_MODEL_1:
+	{
+		const int ntries = 5;
+		int i;
+		for (i=0; i < ntries; i++)
+			ibmcam_Packet_Format1(uvd, light_27, (unsigned short) lighting);
+		break;
+	}
+	case IBMCAM_MODEL_2:
+#if 0
+		/*
+		 * This command apparently requires camera to be stopped. My
+		 * experiments showed that it -is- possible to alter the lighting
+		 * conditions setting "on the fly", but why bother? This setting does
+		 * not work reliably in all cases, so I decided simply to leave the
+		 * setting where Xirlink put it - in the camera setup phase. This code
+		 * is commented out because it does not work at -any- moment, so its
+		 * presence makes no sense. You may use it for experiments.
+		 */
+		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop camera */
+		ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Start camera */
+#endif
+		break;
+	case IBMCAM_MODEL_3:
+	case IBMCAM_MODEL_4:
+	default:
+		break;
+	}
+}
+
+/*
+ * ibmcam_set_sharpness()
+ *
+ * Cameras model 1 have internal smoothing feature. It is controlled by value in
+ * range [0..6], where 0 is most smooth and 6 is most sharp (raw image, I guess).
+ * Recommended value is 4. Cameras model 2 do not have this feature at all.
+ */
+static void ibmcam_set_sharpness(struct uvd *uvd)
+{
+	static const char proc[] = "ibmcam_set_sharpness";
+
+	switch (IBMCAM_T(uvd)->camera_model) {
+	case IBMCAM_MODEL_1:
+	{
+		static const unsigned short sa[] = { 0x11, 0x13, 0x16, 0x18, 0x1a, 0x8, 0x0a };
+		unsigned short i, sv;
+
+		RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX);
+		if (debug > 0)
+			info("%s: Set sharpness to %hu.", proc, sharpness);
+
+		sv = sa[sharpness - SHARPNESS_MIN];
+		for (i=0; i < 2; i++) {
+			ibmcam_send_x_01_00_05	(uvd, unknown_88);
+			ibmcam_send_x_00_05		(uvd, sharp_13);
+			ibmcam_send_x_00_05_02	(uvd, sv);
+		}
+		break;
+	}
+	case IBMCAM_MODEL_2:
+	case IBMCAM_MODEL_4:
+		/* Models 2, 4 do not have this control */
+		break;
+	case IBMCAM_MODEL_3:
+	{	/*
+		 * "Use a table of magic numbers.
+		 *  This setting doesn't really change much.
+		 *  But that's how Windows does it."
+		 */
+		static const struct {
+			unsigned short sv1;
+			unsigned short sv2;
+			unsigned short sv3;
+			unsigned short sv4;
+		} sv[7] = {
+			{ 0x00, 0x00, 0x05, 0x14 },	/* Smoothest */
+			{ 0x01, 0x04, 0x05, 0x14 },
+			{ 0x02, 0x04, 0x05, 0x14 },
+			{ 0x03, 0x04, 0x05, 0x14 },
+			{ 0x03, 0x05, 0x05, 0x14 },
+			{ 0x03, 0x06, 0x05, 0x14 },
+			{ 0x03, 0x07, 0x05, 0x14 }	/* Sharpest */
+		};
+		RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX);
+		RESTRICT_TO_RANGE(sharpness, 0, 6);
+		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
+		ibmcam_model3_Packet1(uvd, 0x0060, sv[sharpness].sv1);
+		ibmcam_model3_Packet1(uvd, 0x0061, sv[sharpness].sv2);
+		ibmcam_model3_Packet1(uvd, 0x0062, sv[sharpness].sv3);
+		ibmcam_model3_Packet1(uvd, 0x0063, sv[sharpness].sv4);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
+		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
+		ibmcam_veio(uvd, 0, 0x0001, 0x0113);
+		break;
+	}
+	default:
+		break;
+	}
+}
+
+/*
+ * ibmcam_set_brightness()
+ *
+ * This procedure changes brightness of the picture.
+ */
+static void ibmcam_set_brightness(struct uvd *uvd)
+{
+	static const char proc[] = "ibmcam_set_brightness";
+	static const unsigned short n = 1;
+
+	if (debug > 0)
+		info("%s: Set brightness to %hu.", proc, uvd->vpic.brightness);
+
+	switch (IBMCAM_T(uvd)->camera_model) {
+	case IBMCAM_MODEL_1:
+	{
+		unsigned short i, j, bv[3];
+		bv[0] = bv[1] = bv[2] = uvd->vpic.brightness >> 10;
+		if (bv[0] == (uvd->vpic_old.brightness >> 10))
+			return;
+		uvd->vpic_old.brightness = bv[0];
+		for (j=0; j < 3; j++)
+			for (i=0; i < n; i++)
+				ibmcam_Packet_Format1(uvd, bright_3x[j], bv[j]);
+		break;
+	}
+	case IBMCAM_MODEL_2:
+	{
+		unsigned short i, j;
+		i = uvd->vpic.brightness >> 12;	/* 0 .. 15 */
+		j = 0x60 + i * ((0xee - 0x60) / 16);	/* 0x60 .. 0xee or so */
+		if (uvd->vpic_old.brightness == j)
+			break;
+		uvd->vpic_old.brightness = j;
+		ibmcam_model2_Packet1(uvd, mod2_brightness, j);
+		break;
+	}
+	case IBMCAM_MODEL_3:
+	{
+		/* Model 3: Brightness range 'i' in [0x0C..0x3F] */
+		unsigned short i =
+			0x0C + (uvd->vpic.brightness / (0xFFFF / (0x3F - 0x0C + 1)));
+		RESTRICT_TO_RANGE(i, 0x0C, 0x3F);
+		if (uvd->vpic_old.brightness == i)
+			break;
+		uvd->vpic_old.brightness = i;
+		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
+		ibmcam_model3_Packet1(uvd, 0x0036, i);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
+		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
+		ibmcam_veio(uvd, 0, 0x0001, 0x0113);
+		break;
+	}
+	case IBMCAM_MODEL_4:
+	{
+		/* Model 4: Brightness range 'i' in [0x04..0xb4] */
+		unsigned short i = 0x04 + (uvd->vpic.brightness / (0xFFFF / (0xb4 - 0x04 + 1)));
+		RESTRICT_TO_RANGE(i, 0x04, 0xb4);
+		if (uvd->vpic_old.brightness == i)
+			break;
+		uvd->vpic_old.brightness = i;
+		ibmcam_model4_BrightnessPacket(uvd, i);
+		break;
+	}
+	default:
+		break;
+	}
+}
+
+static void ibmcam_set_hue(struct uvd *uvd)
+{
+	switch (IBMCAM_T(uvd)->camera_model) {
+	case IBMCAM_MODEL_2:
+	{
+		unsigned short hue = uvd->vpic.hue >> 9; /* 0 .. 7F */
+		if (uvd->vpic_old.hue == hue)
+			return;
+		uvd->vpic_old.hue = hue;
+		ibmcam_model2_Packet1(uvd, mod2_hue, hue);
+		/* ibmcam_model2_Packet1(uvd, mod2_saturation, sat); */
+		break;
+	}
+	case IBMCAM_MODEL_3:
+	{
+#if 0 /* This seems not to work. No problem, will fix programmatically */
+		unsigned short hue = 0x05 + (uvd->vpic.hue / (0xFFFF / (0x37 - 0x05 + 1)));
+		RESTRICT_TO_RANGE(hue, 0x05, 0x37);
+		if (uvd->vpic_old.hue == hue)
+			return;
+		uvd->vpic_old.hue = hue;
+		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
+		ibmcam_model3_Packet1(uvd, 0x007e, hue);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
+		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
+		ibmcam_veio(uvd, 0, 0x0001, 0x0113);
+#endif
+		break;
+	}
+	case IBMCAM_MODEL_4:
+	{
+		unsigned short r_gain, g_gain, b_gain, hue;
+
+		/*
+		 * I am not sure r/g/b_gain variables exactly control gain
+		 * of those channels. Most likely they subtly change some
+		 * very internal image processing settings in the camera.
+		 * In any case, here is what they do, and feel free to tweak:
+		 *
+		 * r_gain: seriously affects red gain
+		 * g_gain: seriously affects green gain
+		 * b_gain: seriously affects blue gain
+		 * hue: changes average color from violet (0) to red (0xFF)
+		 *
+		 * These settings are preset for a decent white balance in
+		 * 320x240, 352x288 modes. Low-res modes exhibit higher contrast
+		 * and therefore may need different values here.
+		 */
+		hue = 20 + (uvd->vpic.hue >> 9);
+		switch (uvd->videosize) {
+		case VIDEOSIZE_128x96:
+			r_gain = 90;
+			g_gain = 166;
+			b_gain = 175;
+			break;
+		case VIDEOSIZE_160x120:
+			r_gain = 70;
+			g_gain = 166;
+			b_gain = 185;
+			break;
+		case VIDEOSIZE_176x144:
+			r_gain = 160;
+			g_gain = 175;
+			b_gain = 185;
+			break;
+		default:
+			r_gain = 120;
+			g_gain = 166;
+			b_gain = 175;
+			break;
+		}
+		RESTRICT_TO_RANGE(hue, 1, 0x7f);
+
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, g_gain, 0x0127);	/* Green gain */
+		ibmcam_veio(uvd, 0, r_gain, 0x012e);	/* Red gain */
+		ibmcam_veio(uvd, 0, b_gain, 0x0130);	/* Blue gain */
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, hue,    0x012d);	/* Hue */
+		ibmcam_veio(uvd, 0, 0xf545, 0x0124);
+		break;
+	}
+	default:
+		break;
+	}
+}
+
+/*
+ * ibmcam_adjust_picture()
+ *
+ * This procedure gets called from V4L interface to update picture settings.
+ * Here we change brightness and contrast.
+ */
+static void ibmcam_adjust_picture(struct uvd *uvd)
+{
+	ibmcam_adjust_contrast(uvd);
+	ibmcam_set_brightness(uvd);
+	ibmcam_set_hue(uvd);
+}
+
+static int ibmcam_model1_setup(struct uvd *uvd)
+{
+	const int ntries = 5;
+	int i;
+
+	ibmcam_veio(uvd, 1, 0x00, 0x0128);
+	ibmcam_veio(uvd, 1, 0x00, 0x0100);
+	ibmcam_veio(uvd, 0, 0x01, 0x0100);	/* LED On  */
+	ibmcam_veio(uvd, 1, 0x00, 0x0100);
+	ibmcam_veio(uvd, 0, 0x81, 0x0100);	/* LED Off */
+	ibmcam_veio(uvd, 1, 0x00, 0x0100);
+	ibmcam_veio(uvd, 0, 0x01, 0x0100);	/* LED On  */
+	ibmcam_veio(uvd, 0, 0x01, 0x0108);
+
+	ibmcam_veio(uvd, 0, 0x03, 0x0112);
+	ibmcam_veio(uvd, 1, 0x00, 0x0115);
+	ibmcam_veio(uvd, 0, 0x06, 0x0115);
+	ibmcam_veio(uvd, 1, 0x00, 0x0116);
+	ibmcam_veio(uvd, 0, 0x44, 0x0116);
+	ibmcam_veio(uvd, 1, 0x00, 0x0116);
+	ibmcam_veio(uvd, 0, 0x40, 0x0116);
+	ibmcam_veio(uvd, 1, 0x00, 0x0115);
+	ibmcam_veio(uvd, 0, 0x0e, 0x0115);
+	ibmcam_veio(uvd, 0, 0x19, 0x012c);
+
+	ibmcam_Packet_Format1(uvd, 0x00, 0x1e);
+	ibmcam_Packet_Format1(uvd, 0x39, 0x0d);
+	ibmcam_Packet_Format1(uvd, 0x39, 0x09);
+	ibmcam_Packet_Format1(uvd, 0x3b, 0x00);
+	ibmcam_Packet_Format1(uvd, 0x28, 0x22);
+	ibmcam_Packet_Format1(uvd, light_27, 0);
+	ibmcam_Packet_Format1(uvd, 0x2b, 0x1f);
+	ibmcam_Packet_Format1(uvd, 0x39, 0x08);
+
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x2c, 0x00);
+
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x30, 0x14);
+
+	ibmcam_PacketFormat2(uvd, 0x39, 0x02);
+	ibmcam_PacketFormat2(uvd, 0x01, 0xe1);
+	ibmcam_PacketFormat2(uvd, 0x02, 0xcd);
+	ibmcam_PacketFormat2(uvd, 0x03, 0xcd);
+	ibmcam_PacketFormat2(uvd, 0x04, 0xfa);
+	ibmcam_PacketFormat2(uvd, 0x3f, 0xff);
+	ibmcam_PacketFormat2(uvd, 0x39, 0x00);
+
+	ibmcam_PacketFormat2(uvd, 0x39, 0x02);
+	ibmcam_PacketFormat2(uvd, 0x0a, 0x37);
+	ibmcam_PacketFormat2(uvd, 0x0b, 0xb8);
+	ibmcam_PacketFormat2(uvd, 0x0c, 0xf3);
+	ibmcam_PacketFormat2(uvd, 0x0d, 0xe3);
+	ibmcam_PacketFormat2(uvd, 0x0e, 0x0d);
+	ibmcam_PacketFormat2(uvd, 0x0f, 0xf2);
+	ibmcam_PacketFormat2(uvd, 0x10, 0xd5);
+	ibmcam_PacketFormat2(uvd, 0x11, 0xba);
+	ibmcam_PacketFormat2(uvd, 0x12, 0x53);
+	ibmcam_PacketFormat2(uvd, 0x3f, 0xff);
+	ibmcam_PacketFormat2(uvd, 0x39, 0x00);
+
+	ibmcam_PacketFormat2(uvd, 0x39, 0x02);
+	ibmcam_PacketFormat2(uvd, 0x16, 0x00);
+	ibmcam_PacketFormat2(uvd, 0x17, 0x28);
+	ibmcam_PacketFormat2(uvd, 0x18, 0x7d);
+	ibmcam_PacketFormat2(uvd, 0x19, 0xbe);
+	ibmcam_PacketFormat2(uvd, 0x3f, 0xff);
+	ibmcam_PacketFormat2(uvd, 0x39, 0x00);
+
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x00, 0x18);
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x13, 0x18);
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x14, 0x06);
+
+	/* This is default brightness */
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x31, 0x37);
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x32, 0x46);
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x33, 0x55);
+
+	ibmcam_Packet_Format1(uvd, 0x2e, 0x04);
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x2d, 0x04);
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x29, 0x80);
+	ibmcam_Packet_Format1(uvd, 0x2c, 0x01);
+	ibmcam_Packet_Format1(uvd, 0x30, 0x17);
+	ibmcam_Packet_Format1(uvd, 0x39, 0x08);
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x34, 0x00);
+
+	ibmcam_veio(uvd, 0, 0x00, 0x0101);
+	ibmcam_veio(uvd, 0, 0x00, 0x010a);
+
+	switch (uvd->videosize) {
+	case VIDEOSIZE_128x96:
+		ibmcam_veio(uvd, 0, 0x80, 0x0103);
+		ibmcam_veio(uvd, 0, 0x60, 0x0105);
+		ibmcam_veio(uvd, 0, 0x0c, 0x010b);
+		ibmcam_veio(uvd, 0, 0x04, 0x011b);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x0b, 0x011d);
+		ibmcam_veio(uvd, 0, 0x00, 0x011e);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x00, 0x0129);
+		break;
+	case VIDEOSIZE_176x144:
+		ibmcam_veio(uvd, 0, 0xb0, 0x0103);
+		ibmcam_veio(uvd, 0, 0x8f, 0x0105);
+		ibmcam_veio(uvd, 0, 0x06, 0x010b);
+		ibmcam_veio(uvd, 0, 0x04, 0x011b);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x0d, 0x011d);
+		ibmcam_veio(uvd, 0, 0x00, 0x011e);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x03, 0x0129);
+		break;
+	case VIDEOSIZE_352x288:
+		ibmcam_veio(uvd, 0, 0xb0, 0x0103);
+		ibmcam_veio(uvd, 0, 0x90, 0x0105);
+		ibmcam_veio(uvd, 0, 0x02, 0x010b);
+		ibmcam_veio(uvd, 0, 0x04, 0x011b);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x05, 0x011d);
+		ibmcam_veio(uvd, 0, 0x00, 0x011e);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x00, 0x0129);
+		break;
+	}
+
+	ibmcam_veio(uvd, 0, 0xff, 0x012b);
+
+	/* This is another brightness - don't know why */
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x31, 0xc3);
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x32, 0xd2);
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, 0x33, 0xe1);
+
+	/* Default contrast */
+	for (i=0; i < ntries; i++)
+		ibmcam_Packet_Format1(uvd, contrast_14, 0x0a);
+
+	/* Default sharpness */
+	for (i=0; i < 2; i++)
+		ibmcam_PacketFormat2(uvd, sharp_13, 0x1a);	/* Level 4 FIXME */
+
+	/* Default lighting conditions */
+	ibmcam_Packet_Format1(uvd, light_27, lighting); /* 0=Bright 2=Low */
+
+	/* Assorted init */
+
+	switch (uvd->videosize) {
+	case VIDEOSIZE_128x96:
+		ibmcam_Packet_Format1(uvd, 0x2b, 0x1e);
+		ibmcam_veio(uvd, 0, 0xc9, 0x0119);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x80, 0x0109);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x36, 0x0102);
+		ibmcam_veio(uvd, 0, 0x1a, 0x0104);
+		ibmcam_veio(uvd, 0, 0x04, 0x011a);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x2b, 0x011c);
+		ibmcam_veio(uvd, 0, 0x23, 0x012a);	/* Same everywhere */
+#if 0
+		ibmcam_veio(uvd, 0, 0x00, 0x0106);
+		ibmcam_veio(uvd, 0, 0x38, 0x0107);
+#else
+		ibmcam_veio(uvd, 0, 0x02, 0x0106);
+		ibmcam_veio(uvd, 0, 0x2a, 0x0107);
+#endif
+		break;
+	case VIDEOSIZE_176x144:
+		ibmcam_Packet_Format1(uvd, 0x2b, 0x1e);
+		ibmcam_veio(uvd, 0, 0xc9, 0x0119);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x80, 0x0109);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x04, 0x0102);
+		ibmcam_veio(uvd, 0, 0x02, 0x0104);
+		ibmcam_veio(uvd, 0, 0x04, 0x011a);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x2b, 0x011c);
+		ibmcam_veio(uvd, 0, 0x23, 0x012a);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x01, 0x0106);
+		ibmcam_veio(uvd, 0, 0xca, 0x0107);
+		break;
+	case VIDEOSIZE_352x288:
+		ibmcam_Packet_Format1(uvd, 0x2b, 0x1f);
+		ibmcam_veio(uvd, 0, 0xc9, 0x0119);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x80, 0x0109);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x08, 0x0102);
+		ibmcam_veio(uvd, 0, 0x01, 0x0104);
+		ibmcam_veio(uvd, 0, 0x04, 0x011a);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x2f, 0x011c);
+		ibmcam_veio(uvd, 0, 0x23, 0x012a);	/* Same everywhere */
+		ibmcam_veio(uvd, 0, 0x03, 0x0106);
+		ibmcam_veio(uvd, 0, 0xf6, 0x0107);
+		break;
+	}
+	return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT);
+}
+
+static int ibmcam_model2_setup(struct uvd *uvd)
+{
+	ibmcam_veio(uvd, 0, 0x0000, 0x0100);	/* LED on */
+	ibmcam_veio(uvd, 1, 0x0000, 0x0116);
+	ibmcam_veio(uvd, 0, 0x0060, 0x0116);
+	ibmcam_veio(uvd, 0, 0x0002, 0x0112);
+	ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
+	ibmcam_veio(uvd, 0, 0x0008, 0x012b);
+	ibmcam_veio(uvd, 0, 0x0000, 0x0108);
+	ibmcam_veio(uvd, 0, 0x0001, 0x0133);
+	ibmcam_veio(uvd, 0, 0x0001, 0x0102);
+	switch (uvd->videosize) {
+	case VIDEOSIZE_176x144:
+		ibmcam_veio(uvd, 0, 0x002c, 0x0103);	/* All except 320x240 */
+		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
+		ibmcam_veio(uvd, 0, 0x0024, 0x0105);	/* 176x144, 352x288 */
+		ibmcam_veio(uvd, 0, 0x00b9, 0x010a);	/* Unique to this mode */
+		ibmcam_veio(uvd, 0, 0x0038, 0x0119);	/* Unique to this mode */
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
+		ibmcam_veio(uvd, 0, 0x0090, 0x0107);	/* Unique to every mode*/
+		break;
+	case VIDEOSIZE_320x240:
+		ibmcam_veio(uvd, 0, 0x0028, 0x0103);	/* Unique to this mode */
+		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
+		ibmcam_veio(uvd, 0, 0x001e, 0x0105);	/* 320x240, 352x240 */
+		ibmcam_veio(uvd, 0, 0x0039, 0x010a);	/* All except 176x144 */
+		ibmcam_veio(uvd, 0, 0x0070, 0x0119);	/* All except 176x144 */
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
+		ibmcam_veio(uvd, 0, 0x0098, 0x0107);	/* Unique to every mode*/
+		break;
+	case VIDEOSIZE_352x240:
+		ibmcam_veio(uvd, 0, 0x002c, 0x0103);	/* All except 320x240 */
+		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
+		ibmcam_veio(uvd, 0, 0x001e, 0x0105);	/* 320x240, 352x240 */
+		ibmcam_veio(uvd, 0, 0x0039, 0x010a);	/* All except 176x144 */
+		ibmcam_veio(uvd, 0, 0x0070, 0x0119);	/* All except 176x144 */
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
+		ibmcam_veio(uvd, 0, 0x00da, 0x0107);	/* Unique to every mode*/
+		break;
+	case VIDEOSIZE_352x288:
+		ibmcam_veio(uvd, 0, 0x002c, 0x0103);	/* All except 320x240 */
+		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
+		ibmcam_veio(uvd, 0, 0x0024, 0x0105);	/* 176x144, 352x288 */
+		ibmcam_veio(uvd, 0, 0x0039, 0x010a);	/* All except 176x144 */
+		ibmcam_veio(uvd, 0, 0x0070, 0x0119);	/* All except 176x144 */
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
+		ibmcam_veio(uvd, 0, 0x00fe, 0x0107);	/* Unique to every mode*/
+		break;
+	}
+	return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT);
+}
+
+/*
+ * ibmcam_model1_setup_after_video_if()
+ *
+ * This code adds finishing touches to the video data interface.
+ * Here we configure the frame rate and turn on the LED.
+ */
+static void ibmcam_model1_setup_after_video_if(struct uvd *uvd)
+{
+	unsigned short internal_frame_rate;
+
+	RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX);
+	internal_frame_rate = FRAMERATE_MAX - framerate; /* 0=Fast 6=Slow */
+	ibmcam_veio(uvd, 0, 0x01, 0x0100);	/* LED On  */
+	ibmcam_veio(uvd, 0, internal_frame_rate, 0x0111);
+	ibmcam_veio(uvd, 0, 0x01, 0x0114);
+	ibmcam_veio(uvd, 0, 0xc0, 0x010c);
+}
+
+static void ibmcam_model2_setup_after_video_if(struct uvd *uvd)
+{
+	unsigned short setup_model2_rg2, setup_model2_sat, setup_model2_yb;
+
+	ibmcam_veio(uvd, 0, 0x0000, 0x0100);	/* LED on */
+
+	switch (uvd->videosize) {
+	case VIDEOSIZE_176x144:
+		ibmcam_veio(uvd, 0, 0x0050, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
+		break;
+	case VIDEOSIZE_320x240:
+	case VIDEOSIZE_352x240:
+	case VIDEOSIZE_352x288:
+		ibmcam_veio(uvd, 0, 0x0040, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
+		break;
+	}
+	ibmcam_veio(uvd, 0, 0x009b, 0x010f);
+	ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
+
+	/*
+	 * Hardware settings, may affect CMOS sensor; not user controls!
+	 * -------------------------------------------------------------
+	 * 0x0004: no effect
+	 * 0x0006: hardware effect
+	 * 0x0008: no effect
+	 * 0x000a: stops video stream, probably important h/w setting
+	 * 0x000c: changes color in hardware manner (not user setting)
+	 * 0x0012: changes number of colors (does not affect speed)
+	 * 0x002a: no effect
+	 * 0x002c: hardware setting (related to scan lines)
+	 * 0x002e: stops video stream, probably important h/w setting
+	 */
+	ibmcam_model2_Packet1(uvd, 0x000a, 0x005c);
+	ibmcam_model2_Packet1(uvd, 0x0004, 0x0000);
+	ibmcam_model2_Packet1(uvd, 0x0006, 0x00fb);
+	ibmcam_model2_Packet1(uvd, 0x0008, 0x0000);
+	ibmcam_model2_Packet1(uvd, 0x000c, 0x0009);
+	ibmcam_model2_Packet1(uvd, 0x0012, 0x000a);
+	ibmcam_model2_Packet1(uvd, 0x002a, 0x0000);
+	ibmcam_model2_Packet1(uvd, 0x002c, 0x0000);
+	ibmcam_model2_Packet1(uvd, 0x002e, 0x0008);
+
+	/*
+	 * Function 0x0030 pops up all over the place. Apparently
+	 * it is a hardware control register, with every bit assigned to
+	 * do something.
+	 */
+	ibmcam_model2_Packet1(uvd, 0x0030, 0x0000);
+
+	/*
+	 * Magic control of CMOS sensor. Only lower values like
+	 * 0-3 work, and picture shifts left or right. Don't change.
+	 */
+	switch (uvd->videosize) {
+	case VIDEOSIZE_176x144:
+		ibmcam_model2_Packet1(uvd, 0x0014, 0x0002);
+		ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */
+		ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */
+		break;
+	case VIDEOSIZE_320x240:
+		ibmcam_model2_Packet1(uvd, 0x0014, 0x0009);
+		ibmcam_model2_Packet1(uvd, 0x0016, 0x0005); /* Horizontal shift */
+		ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Another hardware setting */
+		break;
+	case VIDEOSIZE_352x240:
+		/* This mode doesn't work as Windows programs it; changed to work */
+		ibmcam_model2_Packet1(uvd, 0x0014, 0x0009); /* Windows sets this to 8 */
+		ibmcam_model2_Packet1(uvd, 0x0016, 0x0003); /* Horizontal shift */
+		ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Windows sets this to 0x0045 */
+		break;
+	case VIDEOSIZE_352x288:
+		ibmcam_model2_Packet1(uvd, 0x0014, 0x0003);
+		ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */
+		ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */
+		break;
+	}
+
+	ibmcam_model2_Packet1(uvd, mod2_brightness, 0x005a);
+
+	/*
+	 * We have our own frame rate setting varying from 0 (slowest) to 6 (fastest).
+	 * The camera model 2 allows frame rate in range [0..0x1F] where 0 is also the
+	 * slowest setting. However for all practical reasons high settings make no
+	 * sense because USB is not fast enough to support high FPS. Be aware that
+	 * the picture datastream will be severely disrupted if you ask for
+	 * frame rate faster than allowed for the video size - see below:
+	 *
+	 * Allowable ranges (obtained experimentally on OHCI, K6-3, 450 MHz):
+	 * -----------------------------------------------------------------
+	 * 176x144: [6..31]
+	 * 320x240: [8..31]
+	 * 352x240: [10..31]
+	 * 352x288: [16..31] I have to raise lower threshold for stability...
+	 *
+	 * As usual, slower FPS provides better sensitivity.
+	 */
+	{
+		short hw_fps=31, i_framerate;
+
+		RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX);
+		i_framerate = FRAMERATE_MAX - framerate + FRAMERATE_MIN;
+		switch (uvd->videosize) {
+		case VIDEOSIZE_176x144:
+			hw_fps = 6 + i_framerate*4;
+			break;
+		case VIDEOSIZE_320x240:
+			hw_fps = 8 + i_framerate*3;
+			break;
+		case VIDEOSIZE_352x240:
+			hw_fps = 10 + i_framerate*2;
+			break;
+		case VIDEOSIZE_352x288:
+			hw_fps = 28 + i_framerate/2;
+			break;
+		}
+		if (uvd->debug > 0)
+			info("Framerate (hardware): %hd.", hw_fps);
+		RESTRICT_TO_RANGE(hw_fps, 0, 31);
+		ibmcam_model2_Packet1(uvd, mod2_set_framerate, hw_fps);
+	}
+
+	/*
+	 * This setting does not visibly affect pictures; left it here
+	 * because it was present in Windows USB data stream. This function
+	 * does not allow arbitrary values and apparently is a bit mask, to
+	 * be activated only at appropriate time. Don't change it randomly!
+	 */
+	switch (uvd->videosize) {
+	case VIDEOSIZE_176x144:
+		ibmcam_model2_Packet1(uvd, 0x0026, 0x00c2);
+		break;
+	case VIDEOSIZE_320x240:
+		ibmcam_model2_Packet1(uvd, 0x0026, 0x0044);
+		break;
+	case VIDEOSIZE_352x240:
+		ibmcam_model2_Packet1(uvd, 0x0026, 0x0046);
+		break;
+	case VIDEOSIZE_352x288:
+		ibmcam_model2_Packet1(uvd, 0x0026, 0x0048);
+		break;
+	}
+
+	ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting);
+
+	if (init_model2_rg2 >= 0) {
+		RESTRICT_TO_RANGE(init_model2_rg2, 0, 255);
+		setup_model2_rg2 = init_model2_rg2;
+	} else
+		setup_model2_rg2 = 0x002f;
+
+	if (init_model2_sat >= 0) {
+		RESTRICT_TO_RANGE(init_model2_sat, 0, 255);
+		setup_model2_sat = init_model2_sat;
+	} else
+		setup_model2_sat = 0x0034;
+
+	if (init_model2_yb >= 0) {
+		RESTRICT_TO_RANGE(init_model2_yb, 0, 255);
+		setup_model2_yb = init_model2_yb;
+	} else
+		setup_model2_yb = 0x00a0;
+
+	ibmcam_model2_Packet1(uvd, mod2_color_balance_rg2, setup_model2_rg2);
+	ibmcam_model2_Packet1(uvd, mod2_saturation, setup_model2_sat);
+	ibmcam_model2_Packet1(uvd, mod2_color_balance_yb, setup_model2_yb);
+	ibmcam_model2_Packet1(uvd, mod2_hue, uvd->vpic.hue >> 9); /* 0 .. 7F */;
+
+	/* Hardware control command */
+	ibmcam_model2_Packet1(uvd, 0x0030, 0x0004);
+
+	ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go camera, go! */
+	usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
+}
+
+static void ibmcam_model4_setup_after_video_if(struct uvd *uvd)
+{
+	switch (uvd->videosize) {
+	case VIDEOSIZE_128x96:
+		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
+		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
+		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0070, 0x0119);
+		ibmcam_veio(uvd, 0, 0x00d2, 0x0107);
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
+		ibmcam_veio(uvd, 0, 0x005e, 0x0107);
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
+		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x0039, 0x010a);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
+		ibmcam_veio(uvd, 0, 0x0028, 0x0103);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
+		ibmcam_veio(uvd, 0, 0x001e, 0x0105);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x000a, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
+		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005a, 0x012d);
+		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0043, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00eb, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0017, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0031, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0017, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0078, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
+		break;
+	case VIDEOSIZE_160x120:
+		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
+		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
+		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0038, 0x0119);
+		ibmcam_veio(uvd, 0, 0x00d8, 0x0107);
+		ibmcam_veio(uvd, 0, 0x0002, 0x0106);
+		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00b9, 0x010a);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
+		ibmcam_veio(uvd, 0, 0x0028, 0x0103);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
+		ibmcam_veio(uvd, 0, 0x001e, 0x0105);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x000b, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
+		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005a, 0x012d);
+		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0043, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00c7, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0025, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0048, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0035, 0x012e);
+		ibmcam_veio(uvd, 0, 0x00d0, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0048, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0090, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
+		break;
+	case VIDEOSIZE_176x144:
+		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
+		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
+		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0038, 0x0119);
+		ibmcam_veio(uvd, 0, 0x00d6, 0x0107);
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
+		ibmcam_veio(uvd, 0, 0x0018, 0x0107);
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
+		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00b9, 0x010a);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
+		ibmcam_veio(uvd, 0, 0x002c, 0x0103);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
+		ibmcam_veio(uvd, 0, 0x0024, 0x0105);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0007, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0001, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
+		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005e, 0x012d);
+		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0049, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00c7, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0028, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0010, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
+		ibmcam_veio(uvd, 0, 0x002a, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0010, 0x012d);
+		ibmcam_veio(uvd, 0, 0x006d, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
+		break;
+	case VIDEOSIZE_320x240:
+		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
+		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
+		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0070, 0x0119);
+		ibmcam_veio(uvd, 0, 0x00d2, 0x0107);
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
+		ibmcam_veio(uvd, 0, 0x005e, 0x0107);
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
+		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x0039, 0x010a);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
+		ibmcam_veio(uvd, 0, 0x0028, 0x0103);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
+		ibmcam_veio(uvd, 0, 0x001e, 0x0105);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x000a, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
+		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005a, 0x012d);
+		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0043, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00eb, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0017, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0031, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0017, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0078, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
+		break;
+	case VIDEOSIZE_352x288:
+		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
+		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
+		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0070, 0x0119);
+		ibmcam_veio(uvd, 0, 0x00f2, 0x0107);
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
+		ibmcam_veio(uvd, 0, 0x008c, 0x0107);
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
+		ibmcam_veio(uvd, 0, 0x0039, 0x010a);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
+		ibmcam_veio(uvd, 0, 0x002c, 0x0103);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
+		ibmcam_veio(uvd, 0, 0x0024, 0x0105);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0006, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0002, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
+		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
+		ibmcam_veio(uvd, 0, 0x005e, 0x012d);
+		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0049, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
+		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00cf, 0x012e);
+		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
+		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0010, 0x0127);
+		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
+		ibmcam_veio(uvd, 0, 0x0025, 0x0130);
+		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0010, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0048, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
+		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
+		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
+		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
+		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
+		break;
+	}
+	usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
+}
+
+static void ibmcam_model3_setup_after_video_if(struct uvd *uvd)
+{
+	int i;
+	/*
+	 * 01.01.08 - Added for RCA video in support -LO
+	 * This struct is used to init the Model3 cam to use the RCA video in port
+	 * instead of the CCD sensor.
+	 */
+	static const struct struct_initData initData[] = {
+		{0, 0x0000, 0x010c},
+		{0, 0x0006, 0x012c},
+		{0, 0x0078, 0x012d},
+		{0, 0x0046, 0x012f},
+		{0, 0xd141, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfea8, 0x0124},
+		{1, 0x0000, 0x0116},
+		{0, 0x0064, 0x0116},
+		{1, 0x0000, 0x0115},
+		{0, 0x0003, 0x0115},
+		{0, 0x0008, 0x0123},
+		{0, 0x0000, 0x0117},
+		{0, 0x0000, 0x0112},
+		{0, 0x0080, 0x0100},
+		{0, 0x0000, 0x0100},
+		{1, 0x0000, 0x0116},
+		{0, 0x0060, 0x0116},
+		{0, 0x0002, 0x0112},
+		{0, 0x0000, 0x0123},
+		{0, 0x0001, 0x0117},
+		{0, 0x0040, 0x0108},
+		{0, 0x0019, 0x012c},
+		{0, 0x0040, 0x0116},
+		{0, 0x000a, 0x0115},
+		{0, 0x000b, 0x0115},
+		{0, 0x0078, 0x012d},
+		{0, 0x0046, 0x012f},
+		{0, 0xd141, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfea8, 0x0124},
+		{0, 0x0064, 0x0116},
+		{0, 0x0000, 0x0115},
+		{0, 0x0001, 0x0115},
+		{0, 0xffff, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x00aa, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xffff, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x00f2, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x000f, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xffff, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x00f8, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x00fc, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xffff, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x00f9, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x003c, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xffff, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0027, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0019, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0021, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0006, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0045, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x002a, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x000e, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x002b, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x00f4, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x002c, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0004, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x002d, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0014, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x002e, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0003, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x002f, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0003, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0014, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0040, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0040, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0053, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0x0000, 0x0101},
+		{0, 0x00a0, 0x0103},
+		{0, 0x0078, 0x0105},
+		{0, 0x0000, 0x010a},
+		{0, 0x0024, 0x010b},
+		{0, 0x0028, 0x0119},
+		{0, 0x0088, 0x011b},
+		{0, 0x0002, 0x011d},
+		{0, 0x0003, 0x011e},
+		{0, 0x0000, 0x0129},
+		{0, 0x00fc, 0x012b},
+		{0, 0x0008, 0x0102},
+		{0, 0x0000, 0x0104},
+		{0, 0x0008, 0x011a},
+		{0, 0x0028, 0x011c},
+		{0, 0x0021, 0x012a},
+		{0, 0x0000, 0x0118},
+		{0, 0x0000, 0x0132},
+		{0, 0x0000, 0x0109},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0031, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0040, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0040, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x00dc, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0032, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0020, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0001, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0040, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0040, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0037, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0030, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0xfff9, 0x0124},
+		{0, 0x0086, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0038, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0008, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0x0000, 0x0127},
+		{0, 0xfff8, 0x0124},
+		{0, 0xfffd, 0x0124},
+		{0, 0xfffa, 0x0124},
+		{0, 0x0003, 0x0106},
+		{0, 0x0062, 0x0107},
+		{0, 0x0003, 0x0111},
+	};
+#define NUM_INIT_DATA
+
+	unsigned short compression = 0;	/* 0=none, 7=best frame rate  */
+	int f_rate; /* 0=Fastest 7=slowest */
+
+	if (IBMCAM_T(uvd)->initialized)
+		return;
+
+	/* Internal frame rate is controlled by f_rate value */
+	f_rate = 7 - framerate;
+	RESTRICT_TO_RANGE(f_rate, 0, 7);
+
+	ibmcam_veio(uvd, 0, 0x0000, 0x0100);
+	ibmcam_veio(uvd, 1, 0x0000, 0x0116);
+	ibmcam_veio(uvd, 0, 0x0060, 0x0116);
+	ibmcam_veio(uvd, 0, 0x0002, 0x0112);
+	ibmcam_veio(uvd, 0, 0x0000, 0x0123);
+	ibmcam_veio(uvd, 0, 0x0001, 0x0117);
+	ibmcam_veio(uvd, 0, 0x0040, 0x0108);
+	ibmcam_veio(uvd, 0, 0x0019, 0x012c);
+	ibmcam_veio(uvd, 0, 0x0060, 0x0116);
+	ibmcam_veio(uvd, 0, 0x0002, 0x0115);
+	ibmcam_veio(uvd, 0, 0x0003, 0x0115);
+	ibmcam_veio(uvd, 1, 0x0000, 0x0115);
+	ibmcam_veio(uvd, 0, 0x000b, 0x0115);
+	ibmcam_model3_Packet1(uvd, 0x000a, 0x0040);
+	ibmcam_model3_Packet1(uvd, 0x000b, 0x00f6);
+	ibmcam_model3_Packet1(uvd, 0x000c, 0x0002);
+	ibmcam_model3_Packet1(uvd, 0x000d, 0x0020);
+	ibmcam_model3_Packet1(uvd, 0x000e, 0x0033);
+	ibmcam_model3_Packet1(uvd, 0x000f, 0x0007);
+	ibmcam_model3_Packet1(uvd, 0x0010, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0011, 0x0070);
+	ibmcam_model3_Packet1(uvd, 0x0012, 0x0030);
+	ibmcam_model3_Packet1(uvd, 0x0013, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0014, 0x0001);
+	ibmcam_model3_Packet1(uvd, 0x0015, 0x0001);
+	ibmcam_model3_Packet1(uvd, 0x0016, 0x0001);
+	ibmcam_model3_Packet1(uvd, 0x0017, 0x0001);
+	ibmcam_model3_Packet1(uvd, 0x0018, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x001e, 0x00c3);
+	ibmcam_model3_Packet1(uvd, 0x0020, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0028, 0x0010);
+	ibmcam_model3_Packet1(uvd, 0x0029, 0x0054);
+	ibmcam_model3_Packet1(uvd, 0x002a, 0x0013);
+	ibmcam_model3_Packet1(uvd, 0x002b, 0x0007);
+	ibmcam_model3_Packet1(uvd, 0x002d, 0x0028);
+	ibmcam_model3_Packet1(uvd, 0x002e, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0031, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0032, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0033, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0034, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0035, 0x0038);
+	ibmcam_model3_Packet1(uvd, 0x003a, 0x0001);
+	ibmcam_model3_Packet1(uvd, 0x003c, 0x001e);
+	ibmcam_model3_Packet1(uvd, 0x003f, 0x000a);
+	ibmcam_model3_Packet1(uvd, 0x0041, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0046, 0x003f);
+	ibmcam_model3_Packet1(uvd, 0x0047, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0050, 0x0005);
+	ibmcam_model3_Packet1(uvd, 0x0052, 0x001a);
+	ibmcam_model3_Packet1(uvd, 0x0053, 0x0003);
+	ibmcam_model3_Packet1(uvd, 0x005a, 0x006b);
+	ibmcam_model3_Packet1(uvd, 0x005d, 0x001e);
+	ibmcam_model3_Packet1(uvd, 0x005e, 0x0030);
+	ibmcam_model3_Packet1(uvd, 0x005f, 0x0041);
+	ibmcam_model3_Packet1(uvd, 0x0064, 0x0008);
+	ibmcam_model3_Packet1(uvd, 0x0065, 0x0015);
+	ibmcam_model3_Packet1(uvd, 0x0068, 0x000f);
+	ibmcam_model3_Packet1(uvd, 0x0079, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x007a, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x007c, 0x003f);
+	ibmcam_model3_Packet1(uvd, 0x0082, 0x000f);
+	ibmcam_model3_Packet1(uvd, 0x0085, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x0099, 0x0000);
+	ibmcam_model3_Packet1(uvd, 0x009b, 0x0023);
+	ibmcam_model3_Packet1(uvd, 0x009c, 0x0022);
+	ibmcam_model3_Packet1(uvd, 0x009d, 0x0096);
+	ibmcam_model3_Packet1(uvd, 0x009e, 0x0096);
+	ibmcam_model3_Packet1(uvd, 0x009f, 0x000a);
+
+	switch (uvd->videosize) {
+	case VIDEOSIZE_160x120:
+		ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */
+		ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */
+		ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */
+		ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */
+		ibmcam_veio(uvd, 0, 0x0024, 0x010b); /* Differs everywhere */
+		ibmcam_veio(uvd, 0, 0x00a9, 0x0119);
+		ibmcam_veio(uvd, 0, 0x0016, 0x011b);
+		ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same on 176x144, 320x240 */
+		ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */
+		ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */
+		ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */
+		ibmcam_veio(uvd, 0, 0x0018, 0x0102);
+		ibmcam_veio(uvd, 0, 0x0004, 0x0104);
+		ibmcam_veio(uvd, 0, 0x0004, 0x011a);
+		ibmcam_veio(uvd, 0, 0x0028, 0x011c);
+		ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */
+		ibmcam_veio(uvd, 0, 0x0000, 0x0118);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0132);
+		ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */
+		ibmcam_veio(uvd, 0, compression, 0x0109);
+		break;
+	case VIDEOSIZE_320x240:
+		ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */
+		ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */
+		ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */
+		ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */
+		ibmcam_veio(uvd, 0, 0x0028, 0x010b); /* Differs everywhere */
+		ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same */
+		ibmcam_veio(uvd, 0, 0x0000, 0x011e);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */
+		ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */
+		/* 4 commands from 160x120 skipped */
+		ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */
+		ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */
+		ibmcam_veio(uvd, 0, compression, 0x0109);
+		ibmcam_veio(uvd, 0, 0x00d9, 0x0119);
+		ibmcam_veio(uvd, 0, 0x0006, 0x011b);
+		ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */
+		ibmcam_veio(uvd, 0, 0x0010, 0x0104);
+		ibmcam_veio(uvd, 0, 0x0004, 0x011a);
+		ibmcam_veio(uvd, 0, 0x003f, 0x011c);
+		ibmcam_veio(uvd, 0, 0x001c, 0x0118);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0132);
+		break;
+	case VIDEOSIZE_640x480:
+		ibmcam_veio(uvd, 0, 0x00f0, 0x0105);
+		ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */
+		ibmcam_veio(uvd, 0, 0x0038, 0x010b); /* Differs everywhere */
+		ibmcam_veio(uvd, 0, 0x00d9, 0x0119); /* Same on 320x240, 640x480 */
+		ibmcam_veio(uvd, 0, 0x0006, 0x011b); /* Same on 320x240, 640x480 */
+		ibmcam_veio(uvd, 0, 0x0004, 0x011d); /* NC */
+		ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */
+		ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */
+		ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */
+		ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */
+		ibmcam_veio(uvd, 0, 0x0016, 0x0104); /* NC */
+		ibmcam_veio(uvd, 0, 0x0004, 0x011a); /* Same on 320x240, 640x480 */
+		ibmcam_veio(uvd, 0, 0x003f, 0x011c); /* Same on 320x240, 640x480 */
+		ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */
+		ibmcam_veio(uvd, 0, 0x001c, 0x0118); /* Same on 320x240, 640x480 */
+		ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */
+		ibmcam_veio(uvd, 0, compression, 0x0109);
+		ibmcam_veio(uvd, 0, 0x0040, 0x0101);
+		ibmcam_veio(uvd, 0, 0x0040, 0x0103);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0132); /* Same on 320x240, 640x480 */
+		break;
+	}
+	ibmcam_model3_Packet1(uvd, 0x007e, 0x000e);	/* Hue */
+	ibmcam_model3_Packet1(uvd, 0x0036, 0x0011);	/* Brightness */
+	ibmcam_model3_Packet1(uvd, 0x0060, 0x0002);	/* Sharpness */
+	ibmcam_model3_Packet1(uvd, 0x0061, 0x0004);	/* Sharpness */
+	ibmcam_model3_Packet1(uvd, 0x0062, 0x0005);	/* Sharpness */
+	ibmcam_model3_Packet1(uvd, 0x0063, 0x0014);	/* Sharpness */
+	ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0);	/* Red gain */
+	ibmcam_model3_Packet1(uvd, 0x0097, 0x0096);	/* Blue gain */
+	ibmcam_model3_Packet1(uvd, 0x0067, 0x0001);	/* Contrast */
+	ibmcam_model3_Packet1(uvd, 0x005b, 0x000c);	/* Contrast */
+	ibmcam_model3_Packet1(uvd, 0x005c, 0x0016);	/* Contrast */
+	ibmcam_model3_Packet1(uvd, 0x0098, 0x000b);
+	ibmcam_model3_Packet1(uvd, 0x002c, 0x0003);	/* Was 1, broke 640x480 */
+	ibmcam_model3_Packet1(uvd, 0x002f, 0x002a);
+	ibmcam_model3_Packet1(uvd, 0x0030, 0x0029);
+	ibmcam_model3_Packet1(uvd, 0x0037, 0x0002);
+	ibmcam_model3_Packet1(uvd, 0x0038, 0x0059);
+	ibmcam_model3_Packet1(uvd, 0x003d, 0x002e);
+	ibmcam_model3_Packet1(uvd, 0x003e, 0x0028);
+	ibmcam_model3_Packet1(uvd, 0x0078, 0x0005);
+	ibmcam_model3_Packet1(uvd, 0x007b, 0x0011);
+	ibmcam_model3_Packet1(uvd, 0x007d, 0x004b);
+	ibmcam_model3_Packet1(uvd, 0x007f, 0x0022);
+	ibmcam_model3_Packet1(uvd, 0x0080, 0x000c);
+	ibmcam_model3_Packet1(uvd, 0x0081, 0x000b);
+	ibmcam_model3_Packet1(uvd, 0x0083, 0x00fd);
+	ibmcam_model3_Packet1(uvd, 0x0086, 0x000b);
+	ibmcam_model3_Packet1(uvd, 0x0087, 0x000b);
+	ibmcam_model3_Packet1(uvd, 0x007e, 0x000e);
+	ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0);	/* Red gain */
+	ibmcam_model3_Packet1(uvd, 0x0097, 0x0096);	/* Blue gain */
+	ibmcam_model3_Packet1(uvd, 0x0098, 0x000b);
+
+	switch (uvd->videosize) {
+	case VIDEOSIZE_160x120:
+		ibmcam_veio(uvd, 0, 0x0002, 0x0106);
+		ibmcam_veio(uvd, 0, 0x0008, 0x0107);
+		ibmcam_veio(uvd, 0, f_rate, 0x0111);	/* Frame rate */
+		ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */
+		ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */
+		ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */
+		ibmcam_model3_Packet1(uvd, 0x0040, 0x000a);
+		ibmcam_model3_Packet1(uvd, 0x0051, 0x000a);
+		break;
+	case VIDEOSIZE_320x240:
+		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
+		ibmcam_veio(uvd, 0, 0x0062, 0x0107);
+		ibmcam_veio(uvd, 0, f_rate, 0x0111);	/* Frame rate */
+		ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */
+		ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */
+		ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */
+		ibmcam_model3_Packet1(uvd, 0x0040, 0x0008);
+		ibmcam_model3_Packet1(uvd, 0x0051, 0x000b);
+		break;
+	case VIDEOSIZE_640x480:
+		ibmcam_veio(uvd, 0, 0x0002, 0x0106);	/* Adjustments */
+		ibmcam_veio(uvd, 0, 0x00b4, 0x0107);	/* Adjustments */
+		ibmcam_veio(uvd, 0, f_rate, 0x0111);	/* Frame rate */
+		ibmcam_model3_Packet1(uvd, 0x001f, 0x0002); /* !Same */
+		ibmcam_model3_Packet1(uvd, 0x0039, 0x003e); /* !Same */
+		ibmcam_model3_Packet1(uvd, 0x0040, 0x0008);
+		ibmcam_model3_Packet1(uvd, 0x0051, 0x000a);
+		break;
+	}
+
+	/* 01.01.08 - Added for RCA video in support -LO */
+	if(init_model3_input) {
+		if (debug > 0)
+			info("Setting input to RCA.");
+		for (i=0; i < ARRAY_SIZE(initData); i++) {
+			ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index);
+		}
+	}
+
+	ibmcam_veio(uvd, 0, 0x0001, 0x0114);
+	ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
+	usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
+}
+
+/*
+ * ibmcam_video_stop()
+ *
+ * This code tells camera to stop streaming. The interface remains
+ * configured and bandwidth - claimed.
+ */
+static void ibmcam_video_stop(struct uvd *uvd)
+{
+	switch (IBMCAM_T(uvd)->camera_model) {
+	case IBMCAM_MODEL_1:
+		ibmcam_veio(uvd, 0, 0x00, 0x010c);
+		ibmcam_veio(uvd, 0, 0x00, 0x010c);
+		ibmcam_veio(uvd, 0, 0x01, 0x0114);
+		ibmcam_veio(uvd, 0, 0xc0, 0x010c);
+		ibmcam_veio(uvd, 0, 0x00, 0x010c);
+		ibmcam_send_FF_04_02(uvd);
+		ibmcam_veio(uvd, 1, 0x00, 0x0100);
+		ibmcam_veio(uvd, 0, 0x81, 0x0100);	/* LED Off */
+		break;
+	case IBMCAM_MODEL_2:
+case IBMCAM_MODEL_4:
+		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop the camera */
+
+		ibmcam_model2_Packet1(uvd, 0x0030, 0x0004);
+
+		ibmcam_veio(uvd, 0, 0x0080, 0x0100);	/* LED Off */
+		ibmcam_veio(uvd, 0, 0x0020, 0x0111);
+		ibmcam_veio(uvd, 0, 0x00a0, 0x0111);
+
+		ibmcam_model2_Packet1(uvd, 0x0030, 0x0002);
+
+		ibmcam_veio(uvd, 0, 0x0020, 0x0111);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0112);
+		break;
+	case IBMCAM_MODEL_3:
+#if 1
+		ibmcam_veio(uvd, 0, 0x0000, 0x010c);
+
+		/* Here we are supposed to select video interface alt. setting 0 */
+		ibmcam_veio(uvd, 0, 0x0006, 0x012c);
+
+		ibmcam_model3_Packet1(uvd, 0x0046, 0x0000);
+
+		ibmcam_veio(uvd, 1, 0x0000, 0x0116);
+		ibmcam_veio(uvd, 0, 0x0064, 0x0116);
+		ibmcam_veio(uvd, 1, 0x0000, 0x0115);
+		ibmcam_veio(uvd, 0, 0x0003, 0x0115);
+		ibmcam_veio(uvd, 0, 0x0008, 0x0123);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0117);
+		ibmcam_veio(uvd, 0, 0x0000, 0x0112);
+		ibmcam_veio(uvd, 0, 0x0080, 0x0100);
+		IBMCAM_T(uvd)->initialized = 0;
+#endif
+		break;
+	} /* switch */
+}
+
+/*
+ * ibmcam_reinit_iso()
+ *
+ * This procedure sends couple of commands to the camera and then
+ * resets the video pipe. This sequence was observed to reinit the
+ * camera or, at least, to initiate ISO data stream.
+ *
+ * History:
+ * 1/2/00   Created.
+ */
+static void ibmcam_reinit_iso(struct uvd *uvd, int do_stop)
+{
+	switch (IBMCAM_T(uvd)->camera_model) {
+	case IBMCAM_MODEL_1:
+		if (do_stop)
+			ibmcam_video_stop(uvd);
+		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
+		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
+		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
+		ibmcam_model1_setup_after_video_if(uvd);
+		break;
+	case IBMCAM_MODEL_2:
+		ibmcam_model2_setup_after_video_if(uvd);
+		break;
+	case IBMCAM_MODEL_3:
+		ibmcam_video_stop(uvd);
+		ibmcam_model3_setup_after_video_if(uvd);
+		break;
+	case IBMCAM_MODEL_4:
+		ibmcam_model4_setup_after_video_if(uvd);
+		break;
+	}
+}
+
+static void ibmcam_video_start(struct uvd *uvd)
+{
+	ibmcam_change_lighting_conditions(uvd);
+	ibmcam_set_sharpness(uvd);
+	ibmcam_reinit_iso(uvd, 0);
+}
+
+/*
+ * Return negative code on failure, 0 on success.
+ */
+static int ibmcam_setup_on_open(struct uvd *uvd)
+{
+	int setup_ok = 0; /* Success by default */
+	/* Send init sequence only once, it's large! */
+	if (!IBMCAM_T(uvd)->initialized) { /* FIXME rename */
+		switch (IBMCAM_T(uvd)->camera_model) {
+		case IBMCAM_MODEL_1:
+			setup_ok = ibmcam_model1_setup(uvd);
+			break;
+		case IBMCAM_MODEL_2:
+			setup_ok = ibmcam_model2_setup(uvd);
+			break;
+		case IBMCAM_MODEL_3:
+		case IBMCAM_MODEL_4:
+			/* We do all setup when Isoc stream is requested */
+			break;
+		}
+		IBMCAM_T(uvd)->initialized = (setup_ok != 0);
+	}
+	return setup_ok;
+}
+
+static void ibmcam_configure_video(struct uvd *uvd)
+{
+	if (uvd == NULL)
+		return;
+
+	RESTRICT_TO_RANGE(init_brightness, 0, 255);
+	RESTRICT_TO_RANGE(init_contrast, 0, 255);
+	RESTRICT_TO_RANGE(init_color, 0, 255);
+	RESTRICT_TO_RANGE(init_hue, 0, 255);
+	RESTRICT_TO_RANGE(hue_correction, 0, 255);
+
+	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
+	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
+
+	uvd->vpic.colour = init_color << 8;
+	uvd->vpic.hue = init_hue << 8;
+	uvd->vpic.brightness = init_brightness << 8;
+	uvd->vpic.contrast = init_contrast << 8;
+	uvd->vpic.whiteness = 105 << 8; /* This one isn't used */
+	uvd->vpic.depth = 24;
+	uvd->vpic.palette = VIDEO_PALETTE_RGB24;
+
+	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
+	strcpy(uvd->vcap.name, "IBM USB Camera");
+	uvd->vcap.type = VID_TYPE_CAPTURE;
+	uvd->vcap.channels = 1;
+	uvd->vcap.audios = 0;
+	uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas);
+	uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas);
+	uvd->vcap.minwidth = min_canvasWidth;
+	uvd->vcap.minheight = min_canvasHeight;
+
+	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
+	uvd->vchan.flags = 0;
+	uvd->vchan.tuners = 0;
+	uvd->vchan.channel = 0;
+	uvd->vchan.type = VIDEO_TYPE_CAMERA;
+	strcpy(uvd->vchan.name, "Camera");
+}
+
+/*
+ * ibmcam_probe()
+ *
+ * This procedure queries device descriptor and accepts the interface
+ * if it looks like IBM C-it camera.
+ *
+ * History:
+ * 22-Jan-2000 Moved camera init code to ibmcam_open()
+ * 27=Jan-2000 Changed to use static structures, added locking.
+ * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
+ * 03-Jul-2000 Fixed endianness bug.
+ * 12-Nov-2000 Reworked to comply with new probe() signature.
+ * 23-Jan-2001 Added compatibility with 2.2.x kernels.
+ */
+static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *devid)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct uvd *uvd = NULL;
+	int ix, i, nas, model=0, canvasX=0, canvasY=0;
+	int actInterface=-1, inactInterface=-1, maxPS=0;
+	__u8 ifnum = intf->altsetting->desc.bInterfaceNumber;
+	unsigned char video_ep = 0;
+
+	if (debug >= 1)
+		info("ibmcam_probe(%p,%u.)", intf, ifnum);
+
+	/* We don't handle multi-config cameras */
+	if (dev->descriptor.bNumConfigurations != 1)
+		return -ENODEV;
+
+	/* Check the version/revision */
+	switch (le16_to_cpu(dev->descriptor.bcdDevice)) {
+	case 0x0002:
+		if (ifnum != 2)
+			return -ENODEV;
+		model = IBMCAM_MODEL_1;
+		break;
+	case 0x030A:
+		if (ifnum != 0)
+			return -ENODEV;
+		if ((le16_to_cpu(dev->descriptor.idProduct) == NETCAM_PRODUCT_ID) ||
+		    (le16_to_cpu(dev->descriptor.idProduct) == VEO_800D_PRODUCT_ID))
+			model = IBMCAM_MODEL_4;
+		else
+			model = IBMCAM_MODEL_2;
+		break;
+	case 0x0301:
+		if (ifnum != 0)
+			return -ENODEV;
+		model = IBMCAM_MODEL_3;
+		break;
+	default:
+		err("IBM camera with revision 0x%04x is not supported.",
+			le16_to_cpu(dev->descriptor.bcdDevice));
+		return -ENODEV;
+	}
+
+	/* Print detailed info on what we found so far */
+	do {
+		char *brand = NULL;
+		switch (le16_to_cpu(dev->descriptor.idProduct)) {
+		case NETCAM_PRODUCT_ID:
+			brand = "IBM NetCamera";
+			break;
+		case VEO_800C_PRODUCT_ID:
+			brand = "Veo Stingray [800C]";
+			break;
+		case VEO_800D_PRODUCT_ID:
+			brand = "Veo Stingray [800D]";
+			break;
+		case IBMCAM_PRODUCT_ID:
+		default:
+			brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */
+			break;
+		}
+		info("%s USB camera found (model %d, rev. 0x%04x)",
+		     brand, model, le16_to_cpu(dev->descriptor.bcdDevice));
+	} while (0);
+
+	/* Validate found interface: must have one ISO endpoint */
+	nas = intf->num_altsetting;
+	if (debug > 0)
+		info("Number of alternate settings=%d.", nas);
+	if (nas < 2) {
+		err("Too few alternate settings for this camera!");
+		return -ENODEV;
+	}
+	/* Validate all alternate settings */
+	for (ix=0; ix < nas; ix++) {
+		const struct usb_host_interface *interface;
+		const struct usb_endpoint_descriptor *endpoint;
+
+		interface = &intf->altsetting[ix];
+		i = interface->desc.bAlternateSetting;
+		if (interface->desc.bNumEndpoints != 1) {
+			err("Interface %d. has %u. endpoints!",
+			    ifnum, (unsigned)(interface->desc.bNumEndpoints));
+			return -ENODEV;
+		}
+		endpoint = &interface->endpoint[0].desc;
+		if (video_ep == 0)
+			video_ep = endpoint->bEndpointAddress;
+		else if (video_ep != endpoint->bEndpointAddress) {
+			err("Alternate settings have different endpoint addresses!");
+			return -ENODEV;
+		}
+		if ((endpoint->bmAttributes & 0x03) != 0x01) {
+			err("Interface %d. has non-ISO endpoint!", ifnum);
+			return -ENODEV;
+		}
+		if ((endpoint->bEndpointAddress & 0x80) == 0) {
+			err("Interface %d. has ISO OUT endpoint!", ifnum);
+			return -ENODEV;
+		}
+		if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) {
+			if (inactInterface < 0)
+				inactInterface = i;
+			else {
+				err("More than one inactive alt. setting!");
+				return -ENODEV;
+			}
+		} else {
+			if (actInterface < 0) {
+				actInterface = i;
+				maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
+				if (debug > 0)
+					info("Active setting=%d. maxPS=%d.", i, maxPS);
+			} else
+				err("More than one active alt. setting! Ignoring #%d.", i);
+		}
+	}
+	if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) {
+		err("Failed to recognize the camera!");
+		return -ENODEV;
+	}
+
+	/* Validate options */
+	switch (model) {
+	case IBMCAM_MODEL_1:
+		RESTRICT_TO_RANGE(lighting, 0, 2);
+		RESTRICT_TO_RANGE(size, SIZE_128x96, SIZE_352x288);
+		if (framerate < 0)
+			framerate = 2;
+		canvasX = 352;
+		canvasY = 288;
+		break;
+	case IBMCAM_MODEL_2:
+		RESTRICT_TO_RANGE(lighting, 0, 15);
+		RESTRICT_TO_RANGE(size, SIZE_176x144, SIZE_352x240);
+		if (framerate < 0)
+			framerate = 2;
+		canvasX = 352;
+		canvasY = 240;
+		break;
+	case IBMCAM_MODEL_3:
+		RESTRICT_TO_RANGE(lighting, 0, 15); /* FIXME */
+		switch (size) {
+		case SIZE_160x120:
+			canvasX = 160;
+			canvasY = 120;
+			if (framerate < 0)
+				framerate = 2;
+			RESTRICT_TO_RANGE(framerate, 0, 5);
+			break;
+		default:
+			info("IBM camera: using 320x240");
+			size = SIZE_320x240;
+			/* No break here */
+		case SIZE_320x240:
+			canvasX = 320;
+			canvasY = 240;
+			if (framerate < 0)
+				framerate = 3;
+			RESTRICT_TO_RANGE(framerate, 0, 5);
+			break;
+		case SIZE_640x480:
+			canvasX = 640;
+			canvasY = 480;
+			framerate = 0;	/* Slowest, and maybe even that is too fast */
+			break;
+		}
+		break;
+	case IBMCAM_MODEL_4:
+		RESTRICT_TO_RANGE(lighting, 0, 2);
+		switch (size) {
+		case SIZE_128x96:
+			canvasX = 128;
+			canvasY = 96;
+			break;
+		case SIZE_160x120:
+			canvasX = 160;
+			canvasY = 120;
+			break;
+		default:
+			info("IBM NetCamera: using 176x144");
+			size = SIZE_176x144;
+			/* No break here */
+		case SIZE_176x144:
+			canvasX = 176;
+			canvasY = 144;
+			break;
+		case SIZE_320x240:
+			canvasX = 320;
+			canvasY = 240;
+			break;
+		case SIZE_352x288:
+			canvasX = 352;
+			canvasY = 288;
+			break;
+		}
+		break;
+	default:
+		err("IBM camera: Model %d. not supported!", model);
+		return -ENODEV;
+	}
+
+	uvd = usbvideo_AllocateDevice(cams);
+	if (uvd != NULL) {
+		/* Here uvd is a fully allocated uvd object */
+		uvd->flags = flags;
+		uvd->debug = debug;
+		uvd->dev = dev;
+		uvd->iface = ifnum;
+		uvd->ifaceAltInactive = inactInterface;
+		uvd->ifaceAltActive = actInterface;
+		uvd->video_endp = video_ep;
+		uvd->iso_packet_len = maxPS;
+		uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24;
+		uvd->defaultPalette = VIDEO_PALETTE_RGB24;
+		uvd->canvas = VIDEOSIZE(canvasX, canvasY);
+		uvd->videosize = ibmcam_size_to_videosize(size);
+
+		/* Initialize ibmcam-specific data */
+		assert(IBMCAM_T(uvd) != NULL);
+		IBMCAM_T(uvd)->camera_model = model;
+		IBMCAM_T(uvd)->initialized = 0;
+
+		ibmcam_configure_video(uvd);
+
+		i = usbvideo_RegisterVideoDevice(uvd);
+		if (i != 0) {
+			err("usbvideo_RegisterVideoDevice() failed.");
+			uvd = NULL;
+		}
+	}
+	usb_set_intfdata (intf, uvd);
+	return 0;
+}
+
+
+static struct usb_device_id id_table[] = {
+	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0002, 0x0002) },	/* Model 1 */
+	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 2 */
+	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0301, 0x0301) },	/* Model 3 */
+	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, NETCAM_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 4 */
+	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800C_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 2 */
+	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800D_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 4 */
+	{ }  /* Terminating entry */
+};
+
+/*
+ * ibmcam_init()
+ *
+ * This code is run to initialize the driver.
+ *
+ * History:
+ * 1/27/00  Reworked to use statically allocated ibmcam structures.
+ * 21/10/00 Completely redesigned to use usbvideo services.
+ */
+static int __init ibmcam_init(void)
+{
+	struct usbvideo_cb cbTbl;
+	memset(&cbTbl, 0, sizeof(cbTbl));
+	cbTbl.probe = ibmcam_probe;
+	cbTbl.setupOnOpen = ibmcam_setup_on_open;
+	cbTbl.videoStart = ibmcam_video_start;
+	cbTbl.videoStop = ibmcam_video_stop;
+	cbTbl.processData = ibmcam_ProcessIsocData;
+	cbTbl.postProcess = usbvideo_DeinterlaceFrame;
+	cbTbl.adjustPicture = ibmcam_adjust_picture;
+	cbTbl.getFPS = ibmcam_calculate_fps;
+	return usbvideo_register(
+		&cams,
+		MAX_IBMCAM,
+		sizeof(ibmcam_t),
+		"ibmcam",
+		&cbTbl,
+		THIS_MODULE,
+		id_table);
+}
+
+static void __exit ibmcam_cleanup(void)
+{
+	usbvideo_Deregister(&cams);
+}
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+module_init(ibmcam_init);
+module_exit(ibmcam_cleanup);
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
new file mode 100644
index 000000000000..c11f5d46b114
--- /dev/null
+++ b/drivers/media/video/usbvideo/konicawc.c
@@ -0,0 +1,978 @@
+/*
+ * konicawc.c - konica webcam driver
+ *
+ * Author: Simon Evans <spse@secret.org.uk>
+ *
+ * Copyright (C) 2002 Simon Evans
+ *
+ * Licence: GPL
+ *
+ * Driver for USB webcams based on Konica chipset. This
+ * chipset is used in Intel YC76 camera.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/usb_input.h>
+
+#include "usbvideo.h"
+
+#define MAX_BRIGHTNESS	108
+#define MAX_CONTRAST	108
+#define MAX_SATURATION	108
+#define MAX_SHARPNESS	108
+#define MAX_WHITEBAL	372
+#define MAX_SPEED	6
+
+
+#define MAX_CAMERAS	1
+
+#define DRIVER_VERSION	"v1.4"
+#define DRIVER_DESC	"Konica Webcam driver"
+
+enum ctrl_req {
+	SetWhitebal	= 0x01,
+	SetBrightness	= 0x02,
+	SetSharpness	= 0x03,
+	SetContrast	= 0x04,
+	SetSaturation	= 0x05,
+};
+
+
+enum frame_sizes {
+	SIZE_160X120	= 0,
+	SIZE_160X136	= 1,
+	SIZE_176X144	= 2,
+	SIZE_320X240	= 3,
+
+};
+
+#define MAX_FRAME_SIZE	SIZE_320X240
+
+static struct usbvideo *cams;
+
+#ifdef CONFIG_USB_DEBUG
+static int debug;
+#define DEBUG(n, format, arg...) \
+	if (n <= debug) {	 \
+		printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __FUNCTION__ , ## arg); \
+	}
+#else
+#define DEBUG(n, arg...)
+static const int debug = 0;
+#endif
+
+
+/* Some default values for initial camera settings,
+   can be set by modprobe */
+
+static int size;
+static int speed = 6;		/* Speed (fps) 0 (slowest) to 6 (fastest) */
+static int brightness =	MAX_BRIGHTNESS/2;
+static int contrast =	MAX_CONTRAST/2;
+static int saturation =	MAX_SATURATION/2;
+static int sharpness =	MAX_SHARPNESS/2;
+static int whitebal =	3*(MAX_WHITEBAL/4);
+
+static const int spd_to_iface[] = { 1, 0, 3, 2, 4, 5, 6 };
+
+/* These FPS speeds are from the windows config box. They are
+ * indexed on size (0-2) and speed (0-6). Divide by 3 to get the
+ * real fps.
+ */
+
+static const int spd_to_fps[][7] = { { 24, 40, 48, 60, 72, 80, 100 },
+			       { 24, 40, 48, 60, 72, 80, 100 },
+			       { 18, 30, 36, 45, 54, 60, 75  },
+			       { 6,  10, 12, 15, 18, 21, 25  } };
+
+struct cam_size {
+	u16	width;
+	u16	height;
+	u8	cmd;
+};
+
+static const struct cam_size camera_sizes[] = { { 160, 120, 0x7 },
+					  { 160, 136, 0xa },
+					  { 176, 144, 0x4 },
+					  { 320, 240, 0x5 } };
+
+struct konicawc {
+	u8 brightness;		/* camera uses 0 - 9, x11 for real value */
+	u8 contrast;		/* as above */
+	u8 saturation;		/* as above */
+	u8 sharpness;		/* as above */
+	u8 white_bal;		/* 0 - 33, x11 for real value */
+	u8 speed;		/* Stored as 0 - 6, used as index in spd_to_* (above) */
+	u8 size;		/* Frame Size */
+	int height;
+	int width;
+	struct urb *sts_urb[USBVIDEO_NUMSBUF];
+	u8 sts_buf[USBVIDEO_NUMSBUF][FRAMES_PER_DESC];
+	struct urb *last_data_urb;
+	int lastframe;
+	int cur_frame_size;	/* number of bytes in current frame size */
+	int maxline;		/* number of lines per frame */
+	int yplanesz;		/* Number of bytes in the Y plane */
+	unsigned int buttonsts:1;
+#ifdef CONFIG_INPUT
+	struct input_dev *input;
+	char input_physname[64];
+#endif
+};
+
+
+#define konicawc_set_misc(uvd, req, value, index)		konicawc_ctrl_msg(uvd, USB_DIR_OUT, req, value, index, NULL, 0)
+#define konicawc_get_misc(uvd, req, value, index, buf, sz)	konicawc_ctrl_msg(uvd, USB_DIR_IN, req, value, index, buf, sz)
+#define konicawc_set_value(uvd, value, index)			konicawc_ctrl_msg(uvd, USB_DIR_OUT, 2, value, index, NULL, 0)
+
+
+static int konicawc_ctrl_msg(struct uvd *uvd, u8 dir, u8 request, u16 value, u16 index, void *buf, int len)
+{
+	int retval = usb_control_msg(uvd->dev,
+		dir ? usb_rcvctrlpipe(uvd->dev, 0) : usb_sndctrlpipe(uvd->dev, 0),
+		    request, 0x40 | dir, value, index, buf, len, 1000);
+	return retval < 0 ? retval : 0;
+}
+
+
+static inline void konicawc_camera_on(struct uvd *uvd)
+{
+	DEBUG(0, "camera on");
+	konicawc_set_misc(uvd, 0x2, 1, 0x0b);
+}
+
+
+static inline void konicawc_camera_off(struct uvd *uvd)
+{
+	DEBUG(0, "camera off");
+	konicawc_set_misc(uvd, 0x2, 0, 0x0b);
+}
+
+
+static void konicawc_set_camera_size(struct uvd *uvd)
+{
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+
+	konicawc_set_misc(uvd, 0x2, camera_sizes[cam->size].cmd, 0x08);
+	cam->width = camera_sizes[cam->size].width;
+	cam->height = camera_sizes[cam->size].height;
+	cam->yplanesz = cam->height * cam->width;
+	cam->cur_frame_size = (cam->yplanesz * 3) / 2;
+	cam->maxline = cam->yplanesz / 256;
+	uvd->videosize = VIDEOSIZE(cam->width, cam->height);
+}
+
+
+static int konicawc_setup_on_open(struct uvd *uvd)
+{
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+
+	DEBUG(1, "setting brightness to %d (%d)", cam->brightness,
+	    cam->brightness * 11);
+	konicawc_set_value(uvd, cam->brightness, SetBrightness);
+	DEBUG(1, "setting white balance to %d (%d)", cam->white_bal,
+	    cam->white_bal * 11);
+	konicawc_set_value(uvd, cam->white_bal, SetWhitebal);
+	DEBUG(1, "setting contrast to %d (%d)", cam->contrast,
+	    cam->contrast * 11);
+	konicawc_set_value(uvd, cam->contrast, SetContrast);
+	DEBUG(1, "setting saturation to %d (%d)", cam->saturation,
+	    cam->saturation * 11);
+	konicawc_set_value(uvd, cam->saturation, SetSaturation);
+	DEBUG(1, "setting sharpness to %d (%d)", cam->sharpness,
+	    cam->sharpness * 11);
+	konicawc_set_value(uvd, cam->sharpness, SetSharpness);
+	konicawc_set_camera_size(uvd);
+	cam->lastframe = -2;
+	cam->buttonsts = 0;
+	return 0;
+}
+
+
+static void konicawc_adjust_picture(struct uvd *uvd)
+{
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+
+	konicawc_camera_off(uvd);
+	DEBUG(1, "new brightness: %d", uvd->vpic.brightness);
+	uvd->vpic.brightness = (uvd->vpic.brightness > MAX_BRIGHTNESS) ? MAX_BRIGHTNESS : uvd->vpic.brightness;
+	if(cam->brightness != uvd->vpic.brightness / 11) {
+	   cam->brightness = uvd->vpic.brightness / 11;
+	   DEBUG(1, "setting brightness to %d (%d)", cam->brightness,
+	       cam->brightness * 11);
+	   konicawc_set_value(uvd, cam->brightness, SetBrightness);
+	}
+
+	DEBUG(1, "new contrast: %d", uvd->vpic.contrast);
+	uvd->vpic.contrast = (uvd->vpic.contrast > MAX_CONTRAST) ? MAX_CONTRAST : uvd->vpic.contrast;
+	if(cam->contrast != uvd->vpic.contrast / 11) {
+		cam->contrast = uvd->vpic.contrast / 11;
+		DEBUG(1, "setting contrast to %d (%d)", cam->contrast,
+		    cam->contrast * 11);
+		konicawc_set_value(uvd, cam->contrast, SetContrast);
+	}
+	konicawc_camera_on(uvd);
+}
+
+#ifdef CONFIG_INPUT
+
+static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev)
+{
+	struct input_dev *input_dev;
+
+	usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
+	strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));
+
+	cam->input = input_dev = input_allocate_device();
+	if (!input_dev) {
+		warn("Not enough memory for camera's input device\n");
+		return;
+	}
+
+	input_dev->name = "Konicawc snapshot button";
+	input_dev->phys = cam->input_physname;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->cdev.dev = &dev->dev;
+
+	input_dev->evbit[0] = BIT(EV_KEY);
+	input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0);
+
+	input_dev->private = cam;
+
+	input_register_device(cam->input);
+}
+
+static void konicawc_unregister_input(struct konicawc *cam)
+{
+	if (cam->input) {
+		input_unregister_device(cam->input);
+		cam->input = NULL;
+	}
+}
+
+static void konicawc_report_buttonstat(struct konicawc *cam)
+{
+	if (cam->input) {
+		input_report_key(cam->input, BTN_0, cam->buttonsts);
+		input_sync(cam->input);
+	}
+}
+
+#else
+
+static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { }
+static inline void konicawc_unregister_input(struct konicawc *cam) { }
+static inline void konicawc_report_buttonstat(struct konicawc *cam) { }
+
+#endif /* CONFIG_INPUT */
+
+static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb)
+{
+	char *cdata;
+	int i, totlen = 0;
+	unsigned char *status = stsurb->transfer_buffer;
+	int keep = 0, discard = 0, bad = 0;
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+
+	for (i = 0; i < dataurb->number_of_packets; i++) {
+		int button = cam->buttonsts;
+		unsigned char sts;
+		int n = dataurb->iso_frame_desc[i].actual_length;
+		int st = dataurb->iso_frame_desc[i].status;
+		cdata = dataurb->transfer_buffer +
+			dataurb->iso_frame_desc[i].offset;
+
+		/* Detect and ignore errored packets */
+		if (st < 0) {
+			DEBUG(1, "Data error: packet=%d. len=%d. status=%d.",
+			      i, n, st);
+			uvd->stats.iso_err_count++;
+			continue;
+		}
+
+		/* Detect and ignore empty packets */
+		if (n <= 0) {
+			uvd->stats.iso_skip_count++;
+			continue;
+		}
+
+		/* See what the status data said about the packet */
+		sts = *(status+stsurb->iso_frame_desc[i].offset);
+
+		/* sts: 0x80-0xff: frame start with frame number (ie 0-7f)
+		 * otherwise:
+		 * bit 0 0: keep packet
+		 *	 1: drop packet (padding data)
+		 *
+		 * bit 4 0 button not clicked
+		 *       1 button clicked
+		 * button is used to `take a picture' (in software)
+		 */
+
+		if(sts < 0x80) {
+			button = !!(sts & 0x40);
+			sts &= ~0x40;
+		}
+
+		/* work out the button status, but don't do
+		   anything with it for now */
+
+		if(button != cam->buttonsts) {
+			DEBUG(2, "button: %sclicked", button ? "" : "un");
+			cam->buttonsts = button;
+			konicawc_report_buttonstat(cam);
+		}
+
+		if(sts == 0x01) { /* drop frame */
+			discard++;
+			continue;
+		}
+
+		if((sts > 0x01) && (sts < 0x80)) {
+			info("unknown status %2.2x", sts);
+			bad++;
+			continue;
+		}
+		if(!sts && cam->lastframe == -2) {
+			DEBUG(2, "dropping frame looking for image start");
+			continue;
+		}
+
+		keep++;
+		if(sts & 0x80) { /* frame start */
+			unsigned char marker[] = { 0, 0xff, 0, 0x00 };
+
+			if(cam->lastframe == -2) {
+				DEBUG(2, "found initial image");
+				cam->lastframe = -1;
+			}
+
+			marker[3] = sts & 0x7F;
+			RingQueue_Enqueue(&uvd->dp, marker, 4);
+			totlen += 4;
+		}
+
+		totlen += n;	/* Little local accounting */
+		RingQueue_Enqueue(&uvd->dp, cdata, n);
+	}
+	DEBUG(8, "finished: keep = %d discard = %d bad = %d added %d bytes",
+		    keep, discard, bad, totlen);
+	return totlen;
+}
+
+
+static void resubmit_urb(struct uvd *uvd, struct urb *urb)
+{
+	int i, ret;
+	for (i = 0; i < FRAMES_PER_DESC; i++) {
+		urb->iso_frame_desc[i].status = 0;
+	}
+	urb->dev = uvd->dev;
+	urb->status = 0;
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	DEBUG(3, "submitting urb of length %d", urb->transfer_buffer_length);
+	if(ret)
+		err("usb_submit_urb error (%d)", ret);
+
+}
+
+
+static void konicawc_isoc_irq(struct urb *urb, struct pt_regs *regs)
+{
+	struct uvd *uvd = urb->context;
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+
+	/* We don't want to do anything if we are about to be removed! */
+	if (!CAMERA_IS_OPERATIONAL(uvd))
+		return;
+
+	if (!uvd->streaming) {
+		DEBUG(1, "Not streaming, but interrupt!");
+		return;
+	}
+
+	DEBUG(3, "got frame %d len = %d buflen =%d", urb->start_frame, urb->actual_length, urb->transfer_buffer_length);
+
+	uvd->stats.urb_count++;
+
+	if (urb->transfer_buffer_length > 32) {
+		cam->last_data_urb = urb;
+		return;
+	}
+	/* Copy the data received into ring queue */
+	if(cam->last_data_urb) {
+		int len = 0;
+		if(urb->start_frame != cam->last_data_urb->start_frame)
+			err("Lost sync on frames");
+		else if (!urb->status && !cam->last_data_urb->status)
+			len = konicawc_compress_iso(uvd, cam->last_data_urb, urb);
+
+		resubmit_urb(uvd, cam->last_data_urb);
+		resubmit_urb(uvd, urb);
+		cam->last_data_urb = NULL;
+		uvd->stats.urb_length = len;
+		uvd->stats.data_count += len;
+		if(len)
+			RingQueue_WakeUpInterruptible(&uvd->dp);
+		return;
+	}
+	return;
+}
+
+
+static int konicawc_start_data(struct uvd *uvd)
+{
+	struct usb_device *dev = uvd->dev;
+	int i, errFlag;
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+	int pktsz;
+	struct usb_interface *intf;
+	struct usb_host_interface *interface = NULL;
+
+	intf = usb_ifnum_to_if(dev, uvd->iface);
+	if (intf)
+		interface = usb_altnum_to_altsetting(intf,
+				spd_to_iface[cam->speed]);
+	if (!interface)
+		return -ENXIO;
+	pktsz = le16_to_cpu(interface->endpoint[1].desc.wMaxPacketSize);
+	DEBUG(1, "pktsz = %d", pktsz);
+	if (!CAMERA_IS_OPERATIONAL(uvd)) {
+		err("Camera is not operational");
+		return -EFAULT;
+	}
+	uvd->curframe = -1;
+	konicawc_camera_on(uvd);
+	/* Alternate interface 1 is is the biggest frame size */
+	i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive);
+	if (i < 0) {
+		err("usb_set_interface error");
+		uvd->last_error = i;
+		return -EBUSY;
+	}
+
+	/* We double buffer the Iso lists */
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		int j, k;
+		struct urb *urb = uvd->sbuf[i].urb;
+		urb->dev = dev;
+		urb->context = uvd;
+		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp);
+		urb->interval = 1;
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->transfer_buffer = uvd->sbuf[i].data;
+		urb->complete = konicawc_isoc_irq;
+		urb->number_of_packets = FRAMES_PER_DESC;
+		urb->transfer_buffer_length = pktsz * FRAMES_PER_DESC;
+		for (j=k=0; j < FRAMES_PER_DESC; j++, k += pktsz) {
+			urb->iso_frame_desc[j].offset = k;
+			urb->iso_frame_desc[j].length = pktsz;
+		}
+
+		urb = cam->sts_urb[i];
+		urb->dev = dev;
+		urb->context = uvd;
+		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp-1);
+		urb->interval = 1;
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->transfer_buffer = cam->sts_buf[i];
+		urb->complete = konicawc_isoc_irq;
+		urb->number_of_packets = FRAMES_PER_DESC;
+		urb->transfer_buffer_length = FRAMES_PER_DESC;
+		for (j=0; j < FRAMES_PER_DESC; j++) {
+			urb->iso_frame_desc[j].offset = j;
+			urb->iso_frame_desc[j].length = 1;
+		}
+	}
+
+	cam->last_data_urb = NULL;
+
+	/* Submit all URBs */
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		errFlag = usb_submit_urb(cam->sts_urb[i], GFP_KERNEL);
+		if (errFlag)
+			err("usb_submit_isoc(%d) ret %d", i, errFlag);
+
+		errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
+		if (errFlag)
+			err ("usb_submit_isoc(%d) ret %d", i, errFlag);
+	}
+
+	uvd->streaming = 1;
+	DEBUG(1, "streaming=1 video_endp=$%02x", uvd->video_endp);
+	return 0;
+}
+
+
+static void konicawc_stop_data(struct uvd *uvd)
+{
+	int i, j;
+	struct konicawc *cam;
+
+	if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
+		return;
+
+	konicawc_camera_off(uvd);
+	uvd->streaming = 0;
+	cam = (struct konicawc *)uvd->user_data;
+	cam->last_data_urb = NULL;
+
+	/* Unschedule all of the iso td's */
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		usb_kill_urb(uvd->sbuf[i].urb);
+		usb_kill_urb(cam->sts_urb[i]);
+	}
+
+	if (!uvd->remove_pending) {
+		/* Set packet size to 0 */
+		j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive);
+		if (j < 0) {
+			err("usb_set_interface() error %d.", j);
+			uvd->last_error = j;
+		}
+	}
+}
+
+
+static void konicawc_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+	int maxline = cam->maxline;
+	int yplanesz = cam->yplanesz;
+
+	assert(frame != NULL);
+
+	DEBUG(5, "maxline = %d yplanesz = %d", maxline, yplanesz);
+	DEBUG(3, "Frame state = %d", frame->scanstate);
+
+	if(frame->scanstate == ScanState_Scanning) {
+		int drop = 0;
+		int curframe;
+		int fdrops = 0;
+		DEBUG(3, "Searching for marker, queue len = %d", RingQueue_GetLength(&uvd->dp));
+		while(RingQueue_GetLength(&uvd->dp) >= 4) {
+			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
+			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xff) &&
+			    (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00) &&
+			    (RING_QUEUE_PEEK(&uvd->dp, 3) < 0x80)) {
+				curframe = RING_QUEUE_PEEK(&uvd->dp, 3);
+				if(cam->lastframe >= 0) {
+					fdrops = (0x80 + curframe - cam->lastframe) & 0x7F;
+					fdrops--;
+					if(fdrops) {
+						info("Dropped %d frames (%d -> %d)", fdrops,
+						     cam->lastframe, curframe);
+					}
+				}
+				cam->lastframe = curframe;
+				frame->curline = 0;
+				frame->scanstate = ScanState_Lines;
+				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 4);
+				break;
+			}
+			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
+			drop++;
+		}
+		if(drop)
+			DEBUG(2, "dropped %d bytes looking for new frame", drop);
+	}
+
+	if(frame->scanstate == ScanState_Scanning)
+		return;
+
+	/* Try to move data from queue into frame buffer
+	 * We get data in blocks of 384 bytes made up of:
+	 * 256 Y, 64 U, 64 V.
+	 * This needs to be written out as a Y plane, a U plane and a V plane.
+	 */
+
+	while ( frame->curline < maxline && (RingQueue_GetLength(&uvd->dp) >= 384)) {
+		/* Y */
+		RingQueue_Dequeue(&uvd->dp, frame->data + (frame->curline * 256), 256);
+		/* U */
+		RingQueue_Dequeue(&uvd->dp, frame->data + yplanesz + (frame->curline * 64), 64);
+		/* V */
+		RingQueue_Dequeue(&uvd->dp, frame->data + (5 * yplanesz)/4 + (frame->curline * 64), 64);
+		frame->seqRead_Length += 384;
+		frame->curline++;
+	}
+	/* See if we filled the frame */
+	if (frame->curline == maxline) {
+		DEBUG(5, "got whole frame");
+
+		frame->frameState = FrameState_Done_Hold;
+		frame->curline = 0;
+		uvd->curframe = -1;
+		uvd->stats.frame_num++;
+	}
+}
+
+
+static int konicawc_find_fps(int size, int fps)
+{
+	int i;
+
+	fps *= 3;
+	DEBUG(1, "konica_find_fps: size = %d fps = %d", size, fps);
+	if(fps <= spd_to_fps[size][0])
+		return 0;
+
+	if(fps >= spd_to_fps[size][MAX_SPEED])
+		return MAX_SPEED;
+
+	for(i = 0; i < MAX_SPEED; i++) {
+		if((fps >= spd_to_fps[size][i]) && (fps <= spd_to_fps[size][i+1])) {
+			DEBUG(2, "fps %d between %d and %d", fps, i, i+1);
+			if( (fps - spd_to_fps[size][i]) < (spd_to_fps[size][i+1] - fps))
+				return i;
+			else
+				return i+1;
+		}
+	}
+	return MAX_SPEED+1;
+}
+
+
+static int konicawc_set_video_mode(struct uvd *uvd, struct video_window *vw)
+{
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+	int newspeed = cam->speed;
+	int newsize;
+	int x = vw->width;
+	int y = vw->height;
+	int fps = vw->flags;
+
+	if(x > 0 && y > 0) {
+		DEBUG(2, "trying to find size %d,%d", x, y);
+		for(newsize = 0; newsize <= MAX_FRAME_SIZE; newsize++) {
+			if((camera_sizes[newsize].width == x) && (camera_sizes[newsize].height == y))
+				break;
+		}
+	} else {
+		newsize = cam->size;
+	}
+
+	if(newsize > MAX_FRAME_SIZE) {
+		DEBUG(1, "couldn't find size %d,%d", x, y);
+		return -EINVAL;
+	}
+
+	if(fps > 0) {
+		DEBUG(1, "trying to set fps to %d", fps);
+		newspeed = konicawc_find_fps(newsize, fps);
+		DEBUG(1, "find_fps returned %d (%d)", newspeed, spd_to_fps[newsize][newspeed]);
+	}
+
+	if(newspeed > MAX_SPEED)
+		return -EINVAL;
+
+	DEBUG(1, "setting size to %d speed to %d", newsize, newspeed);
+	if((newsize == cam->size) && (newspeed == cam->speed)) {
+		DEBUG(1, "Nothing to do");
+		return 0;
+	}
+	DEBUG(0, "setting to  %dx%d @ %d fps", camera_sizes[newsize].width,
+	     camera_sizes[newsize].height, spd_to_fps[newsize][newspeed]/3);
+
+	konicawc_stop_data(uvd);
+	uvd->ifaceAltActive = spd_to_iface[newspeed];
+	DEBUG(1, "new interface = %d", uvd->ifaceAltActive);
+	cam->speed = newspeed;
+
+	if(cam->size != newsize) {
+		cam->size = newsize;
+		konicawc_set_camera_size(uvd);
+	}
+
+	/* Flush the input queue and clear any current frame in progress */
+
+	RingQueue_Flush(&uvd->dp);
+	cam->lastframe = -2;
+	if(uvd->curframe != -1) {
+		uvd->frame[uvd->curframe].curline = 0;
+		uvd->frame[uvd->curframe].seqRead_Length = 0;
+		uvd->frame[uvd->curframe].seqRead_Index = 0;
+	}
+
+	konicawc_start_data(uvd);
+	return 0;
+}
+
+
+static int konicawc_calculate_fps(struct uvd *uvd)
+{
+	struct konicawc *cam = uvd->user_data;
+	return spd_to_fps[cam->size][cam->speed]/3;
+}
+
+
+static void konicawc_configure_video(struct uvd *uvd)
+{
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+	u8 buf[2];
+
+	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
+	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
+
+	RESTRICT_TO_RANGE(brightness, 0, MAX_BRIGHTNESS);
+	RESTRICT_TO_RANGE(contrast, 0, MAX_CONTRAST);
+	RESTRICT_TO_RANGE(saturation, 0, MAX_SATURATION);
+	RESTRICT_TO_RANGE(sharpness, 0, MAX_SHARPNESS);
+	RESTRICT_TO_RANGE(whitebal, 0, MAX_WHITEBAL);
+
+	cam->brightness = brightness / 11;
+	cam->contrast = contrast / 11;
+	cam->saturation = saturation / 11;
+	cam->sharpness = sharpness / 11;
+	cam->white_bal = whitebal / 11;
+
+	uvd->vpic.colour = 108;
+	uvd->vpic.hue = 108;
+	uvd->vpic.brightness = brightness;
+	uvd->vpic.contrast = contrast;
+	uvd->vpic.whiteness = whitebal;
+	uvd->vpic.depth = 6;
+	uvd->vpic.palette = VIDEO_PALETTE_YUV420P;
+
+	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
+	strcpy(uvd->vcap.name, "Konica Webcam");
+	uvd->vcap.type = VID_TYPE_CAPTURE;
+	uvd->vcap.channels = 1;
+	uvd->vcap.audios = 0;
+	uvd->vcap.minwidth = camera_sizes[SIZE_160X120].width;
+	uvd->vcap.minheight = camera_sizes[SIZE_160X120].height;
+	uvd->vcap.maxwidth = camera_sizes[SIZE_320X240].width;
+	uvd->vcap.maxheight = camera_sizes[SIZE_320X240].height;
+
+	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
+	uvd->vchan.flags = 0 ;
+	uvd->vchan.tuners = 0;
+	uvd->vchan.channel = 0;
+	uvd->vchan.type = VIDEO_TYPE_CAMERA;
+	strcpy(uvd->vchan.name, "Camera");
+
+	/* Talk to device */
+	DEBUG(1, "device init");
+	if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2))
+		DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]);
+	if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2))
+		DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]);
+	if(konicawc_set_misc(uvd, 0x2, 0, 0xd))
+		DEBUG(2, "2,0,d failed");
+	DEBUG(1, "setting initial values");
+}
+
+static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct uvd *uvd = NULL;
+	int ix, i, nas;
+	int actInterface=-1, inactInterface=-1, maxPS=0;
+	unsigned char video_ep = 0;
+
+	DEBUG(1, "konicawc_probe(%p)", intf);
+
+	/* We don't handle multi-config cameras */
+	if (dev->descriptor.bNumConfigurations != 1)
+		return -ENODEV;
+
+	info("Konica Webcam (rev. 0x%04x)", le16_to_cpu(dev->descriptor.bcdDevice));
+	RESTRICT_TO_RANGE(speed, 0, MAX_SPEED);
+
+	/* Validate found interface: must have one ISO endpoint */
+	nas = intf->num_altsetting;
+	if (nas != 8) {
+		err("Incorrect number of alternate settings (%d) for this camera!", nas);
+		return -ENODEV;
+	}
+	/* Validate all alternate settings */
+	for (ix=0; ix < nas; ix++) {
+		const struct usb_host_interface *interface;
+		const struct usb_endpoint_descriptor *endpoint;
+
+		interface = &intf->altsetting[ix];
+		i = interface->desc.bAlternateSetting;
+		if (interface->desc.bNumEndpoints != 2) {
+			err("Interface %d. has %u. endpoints!",
+			    interface->desc.bInterfaceNumber,
+			    (unsigned)(interface->desc.bNumEndpoints));
+			return -ENODEV;
+		}
+		endpoint = &interface->endpoint[1].desc;
+		DEBUG(1, "found endpoint: addr: 0x%2.2x maxps = 0x%4.4x",
+		    endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize));
+		if (video_ep == 0)
+			video_ep = endpoint->bEndpointAddress;
+		else if (video_ep != endpoint->bEndpointAddress) {
+			err("Alternate settings have different endpoint addresses!");
+			return -ENODEV;
+		}
+		if ((endpoint->bmAttributes & 0x03) != 0x01) {
+			err("Interface %d. has non-ISO endpoint!",
+			    interface->desc.bInterfaceNumber);
+			return -ENODEV;
+		}
+		if ((endpoint->bEndpointAddress & 0x80) == 0) {
+			err("Interface %d. has ISO OUT endpoint!",
+			    interface->desc.bInterfaceNumber);
+			return -ENODEV;
+		}
+		if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) {
+			if (inactInterface < 0)
+				inactInterface = i;
+			else {
+				err("More than one inactive alt. setting!");
+				return -ENODEV;
+			}
+		} else {
+			if (i == spd_to_iface[speed]) {
+				/* This one is the requested one */
+				actInterface = i;
+			}
+		}
+		if (le16_to_cpu(endpoint->wMaxPacketSize) > maxPS)
+			maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
+	}
+	if(actInterface == -1) {
+		err("Cant find required endpoint");
+		return -ENODEV;
+	}
+
+	DEBUG(1, "Selecting requested active setting=%d. maxPS=%d.", actInterface, maxPS);
+
+	uvd = usbvideo_AllocateDevice(cams);
+	if (uvd != NULL) {
+		struct konicawc *cam = (struct konicawc *)(uvd->user_data);
+		/* Here uvd is a fully allocated uvd object */
+		for(i = 0; i < USBVIDEO_NUMSBUF; i++) {
+			cam->sts_urb[i] = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
+			if(cam->sts_urb[i] == NULL) {
+				while(i--) {
+					usb_free_urb(cam->sts_urb[i]);
+				}
+				err("can't allocate urbs");
+				return -ENOMEM;
+			}
+		}
+		cam->speed = speed;
+		RESTRICT_TO_RANGE(size, SIZE_160X120, SIZE_320X240);
+		cam->width = camera_sizes[size].width;
+		cam->height = camera_sizes[size].height;
+		cam->size = size;
+
+		uvd->flags = 0;
+		uvd->debug = debug;
+		uvd->dev = dev;
+		uvd->iface = intf->altsetting->desc.bInterfaceNumber;
+		uvd->ifaceAltInactive = inactInterface;
+		uvd->ifaceAltActive = actInterface;
+		uvd->video_endp = video_ep;
+		uvd->iso_packet_len = maxPS;
+		uvd->paletteBits = 1L << VIDEO_PALETTE_YUV420P;
+		uvd->defaultPalette = VIDEO_PALETTE_YUV420P;
+		uvd->canvas = VIDEOSIZE(320, 240);
+		uvd->videosize = VIDEOSIZE(cam->width, cam->height);
+
+		/* Initialize konicawc specific data */
+		konicawc_configure_video(uvd);
+
+		i = usbvideo_RegisterVideoDevice(uvd);
+		uvd->max_frame_size = (320 * 240 * 3)/2;
+		if (i != 0) {
+			err("usbvideo_RegisterVideoDevice() failed.");
+			uvd = NULL;
+		}
+
+		konicawc_register_input(cam, dev);
+	}
+
+	if (uvd) {
+		usb_set_intfdata (intf, uvd);
+		return 0;
+	}
+	return -EIO;
+}
+
+
+static void konicawc_free_uvd(struct uvd *uvd)
+{
+	int i;
+	struct konicawc *cam = (struct konicawc *)uvd->user_data;
+
+	konicawc_unregister_input(cam);
+
+	for (i = 0; i < USBVIDEO_NUMSBUF; i++) {
+		usb_free_urb(cam->sts_urb[i]);
+		cam->sts_urb[i] = NULL;
+	}
+}
+
+
+static struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x04c8, 0x0720) }, /* Intel YC 76 */
+	{ }  /* Terminating entry */
+};
+
+
+static int __init konicawc_init(void)
+{
+	struct usbvideo_cb cbTbl;
+	info(DRIVER_DESC " " DRIVER_VERSION);
+	memset(&cbTbl, 0, sizeof(cbTbl));
+	cbTbl.probe = konicawc_probe;
+	cbTbl.setupOnOpen = konicawc_setup_on_open;
+	cbTbl.processData = konicawc_process_isoc;
+	cbTbl.getFPS = konicawc_calculate_fps;
+	cbTbl.setVideoMode = konicawc_set_video_mode;
+	cbTbl.startDataPump = konicawc_start_data;
+	cbTbl.stopDataPump = konicawc_stop_data;
+	cbTbl.adjustPicture = konicawc_adjust_picture;
+	cbTbl.userFree = konicawc_free_uvd;
+	return usbvideo_register(
+		&cams,
+		MAX_CAMERAS,
+		sizeof(struct konicawc),
+		"konicawc",
+		&cbTbl,
+		THIS_MODULE,
+		id_table);
+}
+
+
+static void __exit konicawc_cleanup(void)
+{
+	usbvideo_Deregister(&cams);
+}
+
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+module_param(speed, int, 0);
+MODULE_PARM_DESC(speed, "Initial speed: 0 (slowest) - 6 (fastest)");
+module_param(size, int, 0);
+MODULE_PARM_DESC(size, "Initial Size 0: 160x120 1: 160x136 2: 176x144 3: 320x240");
+module_param(brightness, int, 0);
+MODULE_PARM_DESC(brightness, "Initial brightness 0 - 108");
+module_param(contrast, int, 0);
+MODULE_PARM_DESC(contrast, "Initial contrast 0 - 108");
+module_param(saturation, int, 0);
+MODULE_PARM_DESC(saturation, "Initial saturation 0 - 108");
+module_param(sharpness, int, 0);
+MODULE_PARM_DESC(sharpness, "Initial brightness 0 - 108");
+module_param(whitebal, int, 0);
+MODULE_PARM_DESC(whitebal, "Initial white balance 0 - 363");
+
+#ifdef CONFIG_USB_DEBUG
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
+#endif
+
+module_init(konicawc_init);
+module_exit(konicawc_cleanup);
diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c
new file mode 100644
index 000000000000..10c58b4a2e5b
--- /dev/null
+++ b/drivers/media/video/usbvideo/ultracam.c
@@ -0,0 +1,679 @@
+/*
+ * USB NB Camera driver
+ *
+ * HISTORY:
+ * 25-Dec-2002 Dmitri      Removed lighting, sharpness parameters, methods.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "usbvideo.h"
+
+#define	ULTRACAM_VENDOR_ID	0x0461
+#define	ULTRACAM_PRODUCT_ID	0x0813
+
+#define MAX_CAMERAS		4	/* How many devices we allow to connect */
+
+/*
+ * This structure lives in uvd_t->user field.
+ */
+typedef struct {
+	int initialized;	/* Had we already sent init sequence? */
+	int camera_model;	/* What type of IBM camera we got? */
+	int has_hdr;
+} ultracam_t;
+#define	ULTRACAM_T(uvd)	((ultracam_t *)((uvd)->user_data))
+
+static struct usbvideo *cams = NULL;
+
+static int debug = 0;
+
+static int flags = 0; /* FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */
+
+static const int min_canvasWidth  = 8;
+static const int min_canvasHeight = 4;
+
+#define FRAMERATE_MIN	0
+#define FRAMERATE_MAX	6
+static int framerate = -1;
+
+/*
+ * Here we define several initialization variables. They may
+ * be used to automatically set color, hue, brightness and
+ * contrast to desired values. This is particularly useful in
+ * case of webcams (which have no controls and no on-screen
+ * output) and also when a client V4L software is used that
+ * does not have some of those controls. In any case it's
+ * good to have startup values as options.
+ *
+ * These values are all in [0..255] range. This simplifies
+ * operation. Note that actual values of V4L variables may
+ * be scaled up (as much as << 8). User can see that only
+ * on overlay output, however, or through a V4L client.
+ */
+static int init_brightness = 128;
+static int init_contrast = 192;
+static int init_color = 128;
+static int init_hue = 128;
+static int hue_correction = 128;
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
+module_param(flags, int, 0);
+MODULE_PARM_DESC(flags,
+		"Bitfield: 0=VIDIOCSYNC, "
+		"1=B/W, "
+		"2=show hints, "
+		"3=show stats, "
+		"4=test pattern, "
+		"5=separate frames, "
+		"6=clean frames");
+module_param(framerate, int, 0);
+MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)");
+
+module_param(init_brightness, int, 0);
+MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)");
+module_param(init_contrast, int, 0);
+MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)");
+module_param(init_color, int, 0);
+MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)");
+module_param(init_hue, int, 0);
+MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)");
+module_param(hue_correction, int, 0);
+MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)");
+
+/*
+ * ultracam_ProcessIsocData()
+ *
+ * Generic routine to parse the ring queue data. It employs either
+ * ultracam_find_header() or ultracam_parse_lines() to do most
+ * of work.
+ *
+ * 02-Nov-2000 First (mostly dummy) version.
+ * 06-Nov-2000 Rewrote to dump all data into frame.
+ */
+static void ultracam_ProcessIsocData(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+	int n;
+
+	assert(uvd != NULL);
+	assert(frame != NULL);
+
+	/* Try to move data from queue into frame buffer */
+	n = RingQueue_GetLength(&uvd->dp);
+	if (n > 0) {
+		int m;
+		/* See how much spare we have left */
+		m = uvd->max_frame_size - frame->seqRead_Length;
+		if (n > m)
+			n = m;
+		/* Now move that much data into frame buffer */
+		RingQueue_Dequeue(
+			&uvd->dp,
+			frame->data + frame->seqRead_Length,
+			m);
+		frame->seqRead_Length += m;
+	}
+	/* See if we filled the frame */
+	if (frame->seqRead_Length >= uvd->max_frame_size) {
+		frame->frameState = FrameState_Done;
+		uvd->curframe = -1;
+		uvd->stats.frame_num++;
+	}
+}
+
+/*
+ * ultracam_veio()
+ *
+ * History:
+ * 1/27/00  Added check for dev == NULL; this happens if camera is unplugged.
+ */
+static int ultracam_veio(
+	struct uvd *uvd,
+	unsigned char req,
+	unsigned short value,
+	unsigned short index,
+	int is_out)
+{
+	static const char proc[] = "ultracam_veio";
+	unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */;
+	int i;
+
+	if (!CAMERA_IS_OPERATIONAL(uvd))
+		return 0;
+
+	if (!is_out) {
+		i = usb_control_msg(
+			uvd->dev,
+			usb_rcvctrlpipe(uvd->dev, 0),
+			req,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value,
+			index,
+			cp,
+			sizeof(cp),
+			1000);
+#if 1
+		info("USB => %02x%02x%02x%02x%02x%02x%02x%02x "
+		       "(req=$%02x val=$%04x ind=$%04x)",
+		       cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
+		       req, value, index);
+#endif
+	} else {
+		i = usb_control_msg(
+			uvd->dev,
+			usb_sndctrlpipe(uvd->dev, 0),
+			req,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value,
+			index,
+			NULL,
+			0,
+			1000);
+	}
+	if (i < 0) {
+		err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.",
+		    proc, i);
+		uvd->last_error = i;
+	}
+	return i;
+}
+
+/*
+ * ultracam_calculate_fps()
+ */
+static int ultracam_calculate_fps(struct uvd *uvd)
+{
+	return 3 + framerate*4 + framerate/2;
+}
+
+/*
+ * ultracam_adjust_contrast()
+ */
+static void ultracam_adjust_contrast(struct uvd *uvd)
+{
+}
+
+/*
+ * ultracam_set_brightness()
+ *
+ * This procedure changes brightness of the picture.
+ */
+static void ultracam_set_brightness(struct uvd *uvd)
+{
+}
+
+static void ultracam_set_hue(struct uvd *uvd)
+{
+}
+
+/*
+ * ultracam_adjust_picture()
+ *
+ * This procedure gets called from V4L interface to update picture settings.
+ * Here we change brightness and contrast.
+ */
+static void ultracam_adjust_picture(struct uvd *uvd)
+{
+	ultracam_adjust_contrast(uvd);
+	ultracam_set_brightness(uvd);
+	ultracam_set_hue(uvd);
+}
+
+/*
+ * ultracam_video_stop()
+ *
+ * This code tells camera to stop streaming. The interface remains
+ * configured and bandwidth - claimed.
+ */
+static void ultracam_video_stop(struct uvd *uvd)
+{
+}
+
+/*
+ * ultracam_reinit_iso()
+ *
+ * This procedure sends couple of commands to the camera and then
+ * resets the video pipe. This sequence was observed to reinit the
+ * camera or, at least, to initiate ISO data stream.
+ */
+static void ultracam_reinit_iso(struct uvd *uvd, int do_stop)
+{
+}
+
+static void ultracam_video_start(struct uvd *uvd)
+{
+	ultracam_reinit_iso(uvd, 0);
+}
+
+static int ultracam_resetPipe(struct uvd *uvd)
+{
+	usb_clear_halt(uvd->dev, uvd->video_endp);
+	return 0;
+}
+
+static int ultracam_alternateSetting(struct uvd *uvd, int setting)
+{
+	static const char proc[] = "ultracam_alternateSetting";
+	int i;
+	i = usb_set_interface(uvd->dev, uvd->iface, setting);
+	if (i < 0) {
+		err("%s: usb_set_interface error", proc);
+		uvd->last_error = i;
+		return -EBUSY;
+	}
+	return 0;
+}
+
+/*
+ * Return negative code on failure, 0 on success.
+ */
+static int ultracam_setup_on_open(struct uvd *uvd)
+{
+	int setup_ok = 0; /* Success by default */
+	/* Send init sequence only once, it's large! */
+	if (!ULTRACAM_T(uvd)->initialized) {
+		ultracam_alternateSetting(uvd, 0x04);
+		ultracam_alternateSetting(uvd, 0x00);
+		ultracam_veio(uvd, 0x02, 0x0004, 0x000b, 1);
+		ultracam_veio(uvd, 0x02, 0x0001, 0x0005, 1);
+		ultracam_veio(uvd, 0x02, 0x8000, 0x0000, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1);
+		ultracam_veio(uvd, 0x00, 0x00b0, 0x0001, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x0002, 1);
+		ultracam_veio(uvd, 0x00, 0x000c, 0x0003, 1);
+		ultracam_veio(uvd, 0x00, 0x000b, 0x0004, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x0005, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x0006, 1);
+		ultracam_veio(uvd, 0x00, 0x0079, 0x0007, 1);
+		ultracam_veio(uvd, 0x00, 0x003b, 0x0008, 1);
+		ultracam_veio(uvd, 0x00, 0x0002, 0x000f, 1);
+		ultracam_veio(uvd, 0x00, 0x0001, 0x0010, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x0011, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00bf, 1);
+		ultracam_veio(uvd, 0x00, 0x0001, 0x00c0, 1);
+		ultracam_veio(uvd, 0x00, 0x0010, 0x00cb, 1);
+		ultracam_veio(uvd, 0x01, 0x00a4, 0x0001, 1);
+		ultracam_veio(uvd, 0x01, 0x0010, 0x0002, 1);
+		ultracam_veio(uvd, 0x01, 0x0066, 0x0007, 1);
+		ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1);
+		ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1);
+		ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1);
+		ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1);
+		ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1);
+		ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1);
+		ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1);
+		ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1);
+		ultracam_veio(uvd, 0x01, 0x000b, 0x0011, 1);
+		ultracam_veio(uvd, 0x01, 0x0001, 0x0012, 1);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x0013, 1);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x0014, 1);
+		ultracam_veio(uvd, 0x01, 0x0087, 0x0051, 1);
+		ultracam_veio(uvd, 0x01, 0x0040, 0x0052, 1);
+		ultracam_veio(uvd, 0x01, 0x0058, 0x0053, 1);
+		ultracam_veio(uvd, 0x01, 0x0040, 0x0054, 1);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x0040, 1);
+		ultracam_veio(uvd, 0x01, 0x0010, 0x0041, 1);
+		ultracam_veio(uvd, 0x01, 0x0020, 0x0042, 1);
+		ultracam_veio(uvd, 0x01, 0x0030, 0x0043, 1);
+		ultracam_veio(uvd, 0x01, 0x0040, 0x0044, 1);
+		ultracam_veio(uvd, 0x01, 0x0050, 0x0045, 1);
+		ultracam_veio(uvd, 0x01, 0x0060, 0x0046, 1);
+		ultracam_veio(uvd, 0x01, 0x0070, 0x0047, 1);
+		ultracam_veio(uvd, 0x01, 0x0080, 0x0048, 1);
+		ultracam_veio(uvd, 0x01, 0x0090, 0x0049, 1);
+		ultracam_veio(uvd, 0x01, 0x00a0, 0x004a, 1);
+		ultracam_veio(uvd, 0x01, 0x00b0, 0x004b, 1);
+		ultracam_veio(uvd, 0x01, 0x00c0, 0x004c, 1);
+		ultracam_veio(uvd, 0x01, 0x00d0, 0x004d, 1);
+		ultracam_veio(uvd, 0x01, 0x00e0, 0x004e, 1);
+		ultracam_veio(uvd, 0x01, 0x00f0, 0x004f, 1);
+		ultracam_veio(uvd, 0x01, 0x00ff, 0x0050, 1);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x0056, 1);
+		ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1);
+		ultracam_veio(uvd, 0x00, 0x0004, 0x00c2, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0002, 0x00c1, 1);
+		ultracam_veio(uvd, 0x00, 0x0020, 0x00c2, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0040, 0x00c1, 1);
+		ultracam_veio(uvd, 0x00, 0x0017, 0x00c2, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
+		ultracam_veio(uvd, 0x00, 0x00c0, 0x00c1, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
+		ultracam_veio(uvd, 0x02, 0xc040, 0x0001, 1);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x0008, 0);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x0009, 0);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 0);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x000b, 0);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x000c, 0);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x000d, 0);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x000e, 0);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x000f, 0);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x0010, 0);
+		ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1);
+		ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1);
+		ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1);
+		ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1);
+		ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1);
+		ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1);
+		ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1);
+		ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1);
+		ultracam_veio(uvd, 0x01, 0x0000, 0x0001, 0);
+		ultracam_veio(uvd, 0x01, 0x0064, 0x0001, 1);
+		ultracam_veio(uvd, 0x01, 0x0059, 0x0051, 1);
+		ultracam_veio(uvd, 0x01, 0x003f, 0x0052, 1);
+		ultracam_veio(uvd, 0x01, 0x0094, 0x0053, 1);
+		ultracam_veio(uvd, 0x01, 0x00ff, 0x0011, 1);
+		ultracam_veio(uvd, 0x01, 0x0003, 0x0012, 1);
+		ultracam_veio(uvd, 0x01, 0x00f7, 0x0013, 1);
+		ultracam_veio(uvd, 0x00, 0x0009, 0x0011, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x0001, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1);
+		ultracam_veio(uvd, 0x00, 0x0020, 0x00c1, 1);
+		ultracam_veio(uvd, 0x00, 0x0010, 0x00c2, 1);
+		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
+		ultracam_alternateSetting(uvd, 0x04);
+		ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1);
+		ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1);
+		ultracam_veio(uvd, 0x02, 0x0000, 0x0006, 1);
+		ultracam_veio(uvd, 0x02, 0x9000, 0x0007, 1);
+		ultracam_veio(uvd, 0x02, 0x0042, 0x0001, 1);
+		ultracam_veio(uvd, 0x02, 0x0000, 0x000b, 0);
+		ultracam_resetPipe(uvd);
+		ULTRACAM_T(uvd)->initialized = (setup_ok != 0);
+	}
+	return setup_ok;
+}
+
+static void ultracam_configure_video(struct uvd *uvd)
+{
+	if (uvd == NULL)
+		return;
+
+	RESTRICT_TO_RANGE(init_brightness, 0, 255);
+	RESTRICT_TO_RANGE(init_contrast, 0, 255);
+	RESTRICT_TO_RANGE(init_color, 0, 255);
+	RESTRICT_TO_RANGE(init_hue, 0, 255);
+	RESTRICT_TO_RANGE(hue_correction, 0, 255);
+
+	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
+	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
+
+	uvd->vpic.colour = init_color << 8;
+	uvd->vpic.hue = init_hue << 8;
+	uvd->vpic.brightness = init_brightness << 8;
+	uvd->vpic.contrast = init_contrast << 8;
+	uvd->vpic.whiteness = 105 << 8; /* This one isn't used */
+	uvd->vpic.depth = 24;
+	uvd->vpic.palette = VIDEO_PALETTE_RGB24;
+
+	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
+	strcpy(uvd->vcap.name, "IBM Ultra Camera");
+	uvd->vcap.type = VID_TYPE_CAPTURE;
+	uvd->vcap.channels = 1;
+	uvd->vcap.audios = 0;
+	uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas);
+	uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas);
+	uvd->vcap.minwidth = min_canvasWidth;
+	uvd->vcap.minheight = min_canvasHeight;
+
+	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
+	uvd->vchan.flags = 0;
+	uvd->vchan.tuners = 0;
+	uvd->vchan.channel = 0;
+	uvd->vchan.type = VIDEO_TYPE_CAMERA;
+	strcpy(uvd->vchan.name, "Camera");
+}
+
+/*
+ * ultracam_probe()
+ *
+ * This procedure queries device descriptor and accepts the interface
+ * if it looks like our camera.
+ *
+ * History:
+ * 12-Nov-2000 Reworked to comply with new probe() signature.
+ * 23-Jan-2001 Added compatibility with 2.2.x kernels.
+ */
+static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id *devid)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct uvd *uvd = NULL;
+	int ix, i, nas;
+	int actInterface=-1, inactInterface=-1, maxPS=0;
+	unsigned char video_ep = 0;
+
+	if (debug >= 1)
+		info("ultracam_probe(%p)", intf);
+
+	/* We don't handle multi-config cameras */
+	if (dev->descriptor.bNumConfigurations != 1)
+		return -ENODEV;
+
+	info("IBM Ultra camera found (rev. 0x%04x)",
+		le16_to_cpu(dev->descriptor.bcdDevice));
+
+	/* Validate found interface: must have one ISO endpoint */
+	nas = intf->num_altsetting;
+	if (debug > 0)
+		info("Number of alternate settings=%d.", nas);
+	if (nas < 8) {
+		err("Too few alternate settings for this camera!");
+		return -ENODEV;
+	}
+	/* Validate all alternate settings */
+	for (ix=0; ix < nas; ix++) {
+		const struct usb_host_interface *interface;
+		const struct usb_endpoint_descriptor *endpoint;
+
+		interface = &intf->altsetting[ix];
+		i = interface->desc.bAlternateSetting;
+		if (interface->desc.bNumEndpoints != 1) {
+			err("Interface %d. has %u. endpoints!",
+			    interface->desc.bInterfaceNumber,
+			    (unsigned)(interface->desc.bNumEndpoints));
+			return -ENODEV;
+		}
+		endpoint = &interface->endpoint[0].desc;
+		if (video_ep == 0)
+			video_ep = endpoint->bEndpointAddress;
+		else if (video_ep != endpoint->bEndpointAddress) {
+			err("Alternate settings have different endpoint addresses!");
+			return -ENODEV;
+		}
+		if ((endpoint->bmAttributes & 0x03) != 0x01) {
+			err("Interface %d. has non-ISO endpoint!",
+			    interface->desc.bInterfaceNumber);
+			return -ENODEV;
+		}
+		if ((endpoint->bEndpointAddress & 0x80) == 0) {
+			err("Interface %d. has ISO OUT endpoint!",
+			    interface->desc.bInterfaceNumber);
+			return -ENODEV;
+		}
+		if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) {
+			if (inactInterface < 0)
+				inactInterface = i;
+			else {
+				err("More than one inactive alt. setting!");
+				return -ENODEV;
+			}
+		} else {
+			if (actInterface < 0) {
+				actInterface = i;
+				maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
+				if (debug > 0)
+					info("Active setting=%d. maxPS=%d.", i, maxPS);
+			} else {
+				/* Got another active alt. setting */
+				if (maxPS < le16_to_cpu(endpoint->wMaxPacketSize)) {
+					/* This one is better! */
+					actInterface = i;
+					maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
+					if (debug > 0) {
+						info("Even better ctive setting=%d. maxPS=%d.",
+						     i, maxPS);
+					}
+				}
+			}
+		}
+	}
+	if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) {
+		err("Failed to recognize the camera!");
+		return -ENODEV;
+	}
+
+	uvd = usbvideo_AllocateDevice(cams);
+	if (uvd != NULL) {
+		/* Here uvd is a fully allocated uvd object */
+		uvd->flags = flags;
+		uvd->debug = debug;
+		uvd->dev = dev;
+		uvd->iface = intf->altsetting->desc.bInterfaceNumber;
+		uvd->ifaceAltInactive = inactInterface;
+		uvd->ifaceAltActive = actInterface;
+		uvd->video_endp = video_ep;
+		uvd->iso_packet_len = maxPS;
+		uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24;
+		uvd->defaultPalette = VIDEO_PALETTE_RGB24;
+		uvd->canvas = VIDEOSIZE(640, 480);	/* FIXME */
+		uvd->videosize = uvd->canvas; /* ultracam_size_to_videosize(size);*/
+
+		/* Initialize ibmcam-specific data */
+		assert(ULTRACAM_T(uvd) != NULL);
+		ULTRACAM_T(uvd)->camera_model = 0; /* Not used yet */
+		ULTRACAM_T(uvd)->initialized = 0;
+
+		ultracam_configure_video(uvd);
+
+		i = usbvideo_RegisterVideoDevice(uvd);
+		if (i != 0) {
+			err("usbvideo_RegisterVideoDevice() failed.");
+			uvd = NULL;
+		}
+	}
+
+	if (uvd) {
+		usb_set_intfdata (intf, uvd);
+		return 0;
+	}
+	return -EIO;
+}
+
+
+static struct usb_device_id id_table[] = {
+	{ USB_DEVICE(ULTRACAM_VENDOR_ID, ULTRACAM_PRODUCT_ID) },
+	{ }  /* Terminating entry */
+};
+
+/*
+ * ultracam_init()
+ *
+ * This code is run to initialize the driver.
+ */
+static int __init ultracam_init(void)
+{
+	struct usbvideo_cb cbTbl;
+	memset(&cbTbl, 0, sizeof(cbTbl));
+	cbTbl.probe = ultracam_probe;
+	cbTbl.setupOnOpen = ultracam_setup_on_open;
+	cbTbl.videoStart = ultracam_video_start;
+	cbTbl.videoStop = ultracam_video_stop;
+	cbTbl.processData = ultracam_ProcessIsocData;
+	cbTbl.postProcess = usbvideo_DeinterlaceFrame;
+	cbTbl.adjustPicture = ultracam_adjust_picture;
+	cbTbl.getFPS = ultracam_calculate_fps;
+	return usbvideo_register(
+		&cams,
+		MAX_CAMERAS,
+		sizeof(ultracam_t),
+		"ultracam",
+		&cbTbl,
+		THIS_MODULE,
+		id_table);
+}
+
+static void __exit ultracam_cleanup(void)
+{
+	usbvideo_Deregister(&cams);
+}
+
+MODULE_DEVICE_TABLE(usb, id_table);
+MODULE_LICENSE("GPL");
+
+module_init(ultracam_init);
+module_exit(ultracam_cleanup);
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
new file mode 100644
index 000000000000..13b37c8c0d56
--- /dev/null
+++ b/drivers/media/video/usbvideo/usbvideo.c
@@ -0,0 +1,2190 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+
+#include "usbvideo.h"
+
+#if defined(MAP_NR)
+#define	virt_to_page(v)	MAP_NR(v)	/* Kernels 2.2.x */
+#endif
+
+static int video_nr = -1;
+module_param(video_nr, int, 0);
+
+/*
+ * Local prototypes.
+ */
+static void usbvideo_Disconnect(struct usb_interface *intf);
+static void usbvideo_CameraRelease(struct uvd *uvd);
+
+static int usbvideo_v4l_ioctl(struct inode *inode, struct file *file,
+			      unsigned int cmd, unsigned long arg);
+static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma);
+static int usbvideo_v4l_open(struct inode *inode, struct file *file);
+static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
+			     size_t count, loff_t *ppos);
+static int usbvideo_v4l_close(struct inode *inode, struct file *file);
+
+static int usbvideo_StartDataPump(struct uvd *uvd);
+static void usbvideo_StopDataPump(struct uvd *uvd);
+static int usbvideo_GetFrame(struct uvd *uvd, int frameNum);
+static int usbvideo_NewFrame(struct uvd *uvd, int framenum);
+static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
+						struct usbvideo_frame *frame);
+
+/*******************************/
+/* Memory management functions */
+/*******************************/
+static void *usbvideo_rvmalloc(unsigned long size)
+{
+	void *mem;
+	unsigned long adr;
+
+	size = PAGE_ALIGN(size);
+	mem = vmalloc_32(size);
+	if (!mem)
+		return NULL;
+
+	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+	adr = (unsigned long) mem;
+	while (size > 0) {
+		SetPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	return mem;
+}
+
+static void usbvideo_rvfree(void *mem, unsigned long size)
+{
+	unsigned long adr;
+
+	if (!mem)
+		return;
+
+	adr = (unsigned long) mem;
+	while ((long) size > 0) {
+		ClearPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	vfree(mem);
+}
+
+static void RingQueue_Initialize(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	init_waitqueue_head(&rq->wqh);
+}
+
+static void RingQueue_Allocate(struct RingQueue *rq, int rqLen)
+{
+	/* Make sure the requested size is a power of 2 and
+	   round up if necessary. This allows index wrapping
+	   using masks rather than modulo */
+
+	int i = 1;
+	assert(rq != NULL);
+	assert(rqLen > 0);
+
+	while(rqLen >> i)
+		i++;
+	if(rqLen != 1 << (i-1))
+		rqLen = 1 << i;
+
+	rq->length = rqLen;
+	rq->ri = rq->wi = 0;
+	rq->queue = usbvideo_rvmalloc(rq->length);
+	assert(rq->queue != NULL);
+}
+
+static int RingQueue_IsAllocated(const struct RingQueue *rq)
+{
+	if (rq == NULL)
+		return 0;
+	return (rq->queue != NULL) && (rq->length > 0);
+}
+
+static void RingQueue_Free(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	if (RingQueue_IsAllocated(rq)) {
+		usbvideo_rvfree(rq->queue, rq->length);
+		rq->queue = NULL;
+		rq->length = 0;
+	}
+}
+
+int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len)
+{
+	int rql, toread;
+
+	assert(rq != NULL);
+	assert(dst != NULL);
+
+	rql = RingQueue_GetLength(rq);
+	if(!rql)
+		return 0;
+
+	/* Clip requested length to available data */
+	if(len > rql)
+		len = rql;
+
+	toread = len;
+	if(rq->ri > rq->wi) {
+		/* Read data from tail */
+		int read = (toread < (rq->length - rq->ri)) ? toread : rq->length - rq->ri;
+		memcpy(dst, rq->queue + rq->ri, read);
+		toread -= read;
+		dst += read;
+		rq->ri = (rq->ri + read) & (rq->length-1);
+	}
+	if(toread) {
+		/* Read data from head */
+		memcpy(dst, rq->queue + rq->ri, toread);
+		rq->ri = (rq->ri + toread) & (rq->length-1);
+	}
+	return len;
+}
+
+EXPORT_SYMBOL(RingQueue_Dequeue);
+
+int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n)
+{
+	int enqueued = 0;
+
+	assert(rq != NULL);
+	assert(cdata != NULL);
+	assert(rq->length > 0);
+	while (n > 0) {
+		int m, q_avail;
+
+		/* Calculate the largest chunk that fits the tail of the ring */
+		q_avail = rq->length - rq->wi;
+		if (q_avail <= 0) {
+			rq->wi = 0;
+			q_avail = rq->length;
+		}
+		m = n;
+		assert(q_avail > 0);
+		if (m > q_avail)
+			m = q_avail;
+
+		memcpy(rq->queue + rq->wi, cdata, m);
+		RING_QUEUE_ADVANCE_INDEX(rq, wi, m);
+		cdata += m;
+		enqueued += m;
+		n -= m;
+	}
+	return enqueued;
+}
+
+EXPORT_SYMBOL(RingQueue_Enqueue);
+
+static void RingQueue_InterruptibleSleepOn(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	interruptible_sleep_on(&rq->wqh);
+}
+
+void RingQueue_WakeUpInterruptible(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	if (waitqueue_active(&rq->wqh))
+		wake_up_interruptible(&rq->wqh);
+}
+
+EXPORT_SYMBOL(RingQueue_WakeUpInterruptible);
+
+void RingQueue_Flush(struct RingQueue *rq)
+{
+	assert(rq != NULL);
+	rq->ri = 0;
+	rq->wi = 0;
+}
+
+EXPORT_SYMBOL(RingQueue_Flush);
+
+
+/*
+ * usbvideo_VideosizeToString()
+ *
+ * This procedure converts given videosize value to readable string.
+ *
+ * History:
+ * 07-Aug-2000 Created.
+ * 19-Oct-2000 Reworked for usbvideo module.
+ */
+static void usbvideo_VideosizeToString(char *buf, int bufLen, videosize_t vs)
+{
+	char tmp[40];
+	int n;
+
+	n = 1 + sprintf(tmp, "%ldx%ld", VIDEOSIZE_X(vs), VIDEOSIZE_Y(vs));
+	assert(n < sizeof(tmp));
+	if ((buf == NULL) || (bufLen < n))
+		err("usbvideo_VideosizeToString: buffer is too small.");
+	else
+		memmove(buf, tmp, n);
+}
+
+/*
+ * usbvideo_OverlayChar()
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame,
+				 int x, int y, int ch)
+{
+	static const unsigned short digits[16] = {
+		0xF6DE, /* 0 */
+		0x2492, /* 1 */
+		0xE7CE, /* 2 */
+		0xE79E, /* 3 */
+		0xB792, /* 4 */
+		0xF39E, /* 5 */
+		0xF3DE, /* 6 */
+		0xF492, /* 7 */
+		0xF7DE, /* 8 */
+		0xF79E, /* 9 */
+		0x77DA, /* a */
+		0xD75C, /* b */
+		0xF24E, /* c */
+		0xD6DC, /* d */
+		0xF34E, /* e */
+		0xF348  /* f */
+	};
+	unsigned short digit;
+	int ix, iy;
+
+	if ((uvd == NULL) || (frame == NULL))
+		return;
+
+	if (ch >= '0' && ch <= '9')
+		ch -= '0';
+	else if (ch >= 'A' && ch <= 'F')
+		ch = 10 + (ch - 'A');
+	else if (ch >= 'a' && ch <= 'f')
+		ch = 10 + (ch - 'a');
+	else
+		return;
+	digit = digits[ch];
+
+	for (iy=0; iy < 5; iy++) {
+		for (ix=0; ix < 3; ix++) {
+			if (digit & 0x8000) {
+				if (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24)) {
+/* TODO */				RGB24_PUTPIXEL(frame, x+ix, y+iy, 0xFF, 0xFF, 0xFF);
+				}
+			}
+			digit = digit << 1;
+		}
+	}
+}
+
+/*
+ * usbvideo_OverlayString()
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+static void usbvideo_OverlayString(struct uvd *uvd, struct usbvideo_frame *frame,
+				   int x, int y, const char *str)
+{
+	while (*str) {
+		usbvideo_OverlayChar(uvd, frame, x, y, *str);
+		str++;
+		x += 4; /* 3 pixels character + 1 space */
+	}
+}
+
+/*
+ * usbvideo_OverlayStats()
+ *
+ * Overlays important debugging information.
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+static void usbvideo_OverlayStats(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+	const int y_diff = 8;
+	char tmp[16];
+	int x = 10, y=10;
+	long i, j, barLength;
+	const int qi_x1 = 60, qi_y1 = 10;
+	const int qi_x2 = VIDEOSIZE_X(frame->request) - 10, qi_h = 10;
+
+	/* Call the user callback, see if we may proceed after that */
+	if (VALID_CALLBACK(uvd, overlayHook)) {
+		if (GET_CALLBACK(uvd, overlayHook)(uvd, frame) < 0)
+			return;
+	}
+
+	/*
+	 * We draw a (mostly) hollow rectangle with qi_xxx coordinates.
+	 * Left edge symbolizes the queue index 0; right edge symbolizes
+	 * the full capacity of the queue.
+	 */
+	barLength = qi_x2 - qi_x1 - 2;
+	if ((barLength > 10) && (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24))) {
+/* TODO */	long u_lo, u_hi, q_used;
+		long m_ri, m_wi, m_lo, m_hi;
+
+		/*
+		 * Determine fill zones (used areas of the queue):
+		 * 0 xxxxxxx u_lo ...... uvd->dp.ri xxxxxxxx u_hi ..... uvd->dp.length
+		 *
+		 * if u_lo < 0 then there is no first filler.
+		 */
+
+		q_used = RingQueue_GetLength(&uvd->dp);
+		if ((uvd->dp.ri + q_used) >= uvd->dp.length) {
+			u_hi = uvd->dp.length;
+			u_lo = (q_used + uvd->dp.ri) & (uvd->dp.length-1);
+		} else {
+			u_hi = (q_used + uvd->dp.ri);
+			u_lo = -1;
+		}
+
+		/* Convert byte indices into screen units */
+		m_ri = qi_x1 + ((barLength * uvd->dp.ri) / uvd->dp.length);
+		m_wi = qi_x1 + ((barLength * uvd->dp.wi) / uvd->dp.length);
+		m_lo = (u_lo > 0) ? (qi_x1 + ((barLength * u_lo) / uvd->dp.length)) : -1;
+		m_hi = qi_x1 + ((barLength * u_hi) / uvd->dp.length);
+
+		for (j=qi_y1; j < (qi_y1 + qi_h); j++) {
+			for (i=qi_x1; i < qi_x2; i++) {
+				/* Draw border lines */
+				if ((j == qi_y1) || (j == (qi_y1 + qi_h - 1)) ||
+				    (i == qi_x1) || (i == (qi_x2 - 1))) {
+					RGB24_PUTPIXEL(frame, i, j, 0xFF, 0xFF, 0xFF);
+					continue;
+				}
+				/* For all other points the Y coordinate does not matter */
+				if ((i >= m_ri) && (i <= (m_ri + 3))) {
+					RGB24_PUTPIXEL(frame, i, j, 0x00, 0xFF, 0x00);
+				} else if ((i >= m_wi) && (i <= (m_wi + 3))) {
+					RGB24_PUTPIXEL(frame, i, j, 0xFF, 0x00, 0x00);
+				} else if ((i < m_lo) || ((i > m_ri) && (i < m_hi)))
+					RGB24_PUTPIXEL(frame, i, j, 0x00, 0x00, 0xFF);
+			}
+		}
+	}
+
+	sprintf(tmp, "%8lx", uvd->stats.frame_num);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.urb_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.urb_length);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.data_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.header_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.iso_skip_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8lx", uvd->stats.iso_err_count);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8x", uvd->vpic.colour);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8x", uvd->vpic.hue);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8x", uvd->vpic.brightness >> 8);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8x", uvd->vpic.contrast >> 12);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+
+	sprintf(tmp, "%8d", uvd->vpic.whiteness >> 8);
+	usbvideo_OverlayString(uvd, frame, x, y, tmp);
+	y += y_diff;
+}
+
+/*
+ * usbvideo_ReportStatistics()
+ *
+ * This procedure prints packet and transfer statistics.
+ *
+ * History:
+ * 14-Jan-2000 Corrected default multiplier.
+ */
+static void usbvideo_ReportStatistics(const struct uvd *uvd)
+{
+	if ((uvd != NULL) && (uvd->stats.urb_count > 0)) {
+		unsigned long allPackets, badPackets, goodPackets, percent;
+		allPackets = uvd->stats.urb_count * CAMERA_URB_FRAMES;
+		badPackets = uvd->stats.iso_skip_count + uvd->stats.iso_err_count;
+		goodPackets = allPackets - badPackets;
+		/* Calculate percentage wisely, remember integer limits */
+		assert(allPackets != 0);
+		if (goodPackets < (((unsigned long)-1)/100))
+			percent = (100 * goodPackets) / allPackets;
+		else
+			percent = goodPackets / (allPackets / 100);
+		info("Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%",
+		     allPackets, badPackets, percent);
+		if (uvd->iso_packet_len > 0) {
+			unsigned long allBytes, xferBytes;
+			char multiplier = ' ';
+			allBytes = allPackets * uvd->iso_packet_len;
+			xferBytes = uvd->stats.data_count;
+			assert(allBytes != 0);
+			if (xferBytes < (((unsigned long)-1)/100))
+				percent = (100 * xferBytes) / allBytes;
+			else
+				percent = xferBytes / (allBytes / 100);
+			/* Scale xferBytes for easy reading */
+			if (xferBytes > 10*1024) {
+				xferBytes /= 1024;
+				multiplier = 'K';
+				if (xferBytes > 10*1024) {
+					xferBytes /= 1024;
+					multiplier = 'M';
+					if (xferBytes > 10*1024) {
+						xferBytes /= 1024;
+						multiplier = 'G';
+						if (xferBytes > 10*1024) {
+							xferBytes /= 1024;
+							multiplier = 'T';
+						}
+					}
+				}
+			}
+			info("Transfer Statistics: Transferred=%lu%cB Usage=%lu%%",
+			     xferBytes, multiplier, percent);
+		}
+	}
+}
+
+/*
+ * usbvideo_TestPattern()
+ *
+ * Procedure forms a test pattern (yellow grid on blue background).
+ *
+ * Parameters:
+ * fullframe: if TRUE then entire frame is filled, otherwise the procedure
+ *	      continues from the current scanline.
+ * pmode      0: fill the frame with solid blue color (like on VCR or TV)
+ *	      1: Draw a colored grid
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode)
+{
+	struct usbvideo_frame *frame;
+	int num_cell = 0;
+	int scan_length = 0;
+	static int num_pass = 0;
+
+	if (uvd == NULL) {
+		err("%s: uvd == NULL", __FUNCTION__);
+		return;
+	}
+	if ((uvd->curframe < 0) || (uvd->curframe >= USBVIDEO_NUMFRAMES)) {
+		err("%s: uvd->curframe=%d.", __FUNCTION__, uvd->curframe);
+		return;
+	}
+
+	/* Grab the current frame */
+	frame = &uvd->frame[uvd->curframe];
+
+	/* Optionally start at the beginning */
+	if (fullframe) {
+		frame->curline = 0;
+		frame->seqRead_Length = 0;
+	}
+#if 0
+	{	/* For debugging purposes only */
+		char tmp[20];
+		usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request);
+		info("testpattern: frame=%s", tmp);
+	}
+#endif
+	/* Form every scan line */
+	for (; frame->curline < VIDEOSIZE_Y(frame->request); frame->curline++) {
+		int i;
+		unsigned char *f = frame->data +
+			(VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL * frame->curline);
+		for (i=0; i < VIDEOSIZE_X(frame->request); i++) {
+			unsigned char cb=0x80;
+			unsigned char cg = 0;
+			unsigned char cr = 0;
+
+			if (pmode == 1) {
+				if (frame->curline % 32 == 0)
+					cb = 0, cg = cr = 0xFF;
+				else if (i % 32 == 0) {
+					if (frame->curline % 32 == 1)
+						num_cell++;
+					cb = 0, cg = cr = 0xFF;
+				} else {
+					cb = ((num_cell*7) + num_pass) & 0xFF;
+					cg = ((num_cell*5) + num_pass*2) & 0xFF;
+					cr = ((num_cell*3) + num_pass*3) & 0xFF;
+				}
+			} else {
+				/* Just the blue screen */
+			}
+
+			*f++ = cb;
+			*f++ = cg;
+			*f++ = cr;
+			scan_length += 3;
+		}
+	}
+
+	frame->frameState = FrameState_Done;
+	frame->seqRead_Length += scan_length;
+	++num_pass;
+
+	/* We do this unconditionally, regardless of FLAGS_OVERLAY_STATS */
+	usbvideo_OverlayStats(uvd, frame);
+}
+
+EXPORT_SYMBOL(usbvideo_TestPattern);
+
+
+#ifdef DEBUG
+/*
+ * usbvideo_HexDump()
+ *
+ * A debugging tool. Prints hex dumps.
+ *
+ * History:
+ * 29-Jul-2000 Added printing of offsets.
+ */
+void usbvideo_HexDump(const unsigned char *data, int len)
+{
+	const int bytes_per_line = 32;
+	char tmp[128]; /* 32*3 + 5 */
+	int i, k;
+
+	for (i=k=0; len > 0; i++, len--) {
+		if (i > 0 && ((i % bytes_per_line) == 0)) {
+			printk("%s\n", tmp);
+			k=0;
+		}
+		if ((i % bytes_per_line) == 0)
+			k += sprintf(&tmp[k], "%04x: ", i);
+		k += sprintf(&tmp[k], "%02x ", data[i]);
+	}
+	if (k > 0)
+		printk("%s\n", tmp);
+}
+
+EXPORT_SYMBOL(usbvideo_HexDump);
+
+#endif
+
+/* ******************************************************************** */
+
+/* XXX: this piece of crap really wants some error handling.. */
+static void usbvideo_ClientIncModCount(struct uvd *uvd)
+{
+	if (uvd == NULL) {
+		err("%s: uvd == NULL", __FUNCTION__);
+		return;
+	}
+	if (uvd->handle == NULL) {
+		err("%s: uvd->handle == NULL", __FUNCTION__);
+		return;
+	}
+	if (uvd->handle->md_module == NULL) {
+		err("%s: uvd->handle->md_module == NULL", __FUNCTION__);
+		return;
+	}
+	if (!try_module_get(uvd->handle->md_module)) {
+		err("%s: try_module_get() == 0", __FUNCTION__);
+		return;
+	}
+}
+
+static void usbvideo_ClientDecModCount(struct uvd *uvd)
+{
+	if (uvd == NULL) {
+		err("%s: uvd == NULL", __FUNCTION__);
+		return;
+	}
+	if (uvd->handle == NULL) {
+		err("%s: uvd->handle == NULL", __FUNCTION__);
+		return;
+	}
+	if (uvd->handle->md_module == NULL) {
+		err("%s: uvd->handle->md_module == NULL", __FUNCTION__);
+		return;
+	}
+	module_put(uvd->handle->md_module);
+}
+
+int usbvideo_register(
+	struct usbvideo **pCams,
+	const int num_cams,
+	const int num_extra,
+	const char *driverName,
+	const struct usbvideo_cb *cbTbl,
+	struct module *md,
+	const struct usb_device_id *id_table)
+{
+	struct usbvideo *cams;
+	int i, base_size, result;
+
+	/* Check parameters for sanity */
+	if ((num_cams <= 0) || (pCams == NULL) || (cbTbl == NULL)) {
+		err("%s: Illegal call", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	/* Check registration callback - must be set! */
+	if (cbTbl->probe == NULL) {
+		err("%s: probe() is required!", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
+	cams = (struct usbvideo *) kzalloc(base_size, GFP_KERNEL);
+	if (cams == NULL) {
+		err("Failed to allocate %d. bytes for usbvideo struct", base_size);
+		return -ENOMEM;
+	}
+	dbg("%s: Allocated $%p (%d. bytes) for %d. cameras",
+	    __FUNCTION__, cams, base_size, num_cams);
+
+	/* Copy callbacks, apply defaults for those that are not set */
+	memmove(&cams->cb, cbTbl, sizeof(cams->cb));
+	if (cams->cb.getFrame == NULL)
+		cams->cb.getFrame = usbvideo_GetFrame;
+	if (cams->cb.disconnect == NULL)
+		cams->cb.disconnect = usbvideo_Disconnect;
+	if (cams->cb.startDataPump == NULL)
+		cams->cb.startDataPump = usbvideo_StartDataPump;
+	if (cams->cb.stopDataPump == NULL)
+		cams->cb.stopDataPump = usbvideo_StopDataPump;
+
+	cams->num_cameras = num_cams;
+	cams->cam = (struct uvd *) &cams[1];
+	cams->md_module = md;
+	if (cams->md_module == NULL)
+		warn("%s: module == NULL!", __FUNCTION__);
+	mutex_init(&cams->lock);	/* to 1 == available */
+
+	for (i = 0; i < num_cams; i++) {
+		struct uvd *up = &cams->cam[i];
+
+		up->handle = cams;
+
+		/* Allocate user_data separately because of kmalloc's limits */
+		if (num_extra > 0) {
+			up->user_size = num_cams * num_extra;
+			up->user_data = kmalloc(up->user_size, GFP_KERNEL);
+			if (up->user_data == NULL) {
+				err("%s: Failed to allocate user_data (%d. bytes)",
+				    __FUNCTION__, up->user_size);
+				while (i) {
+					up = &cams->cam[--i];
+					kfree(up->user_data);
+				}
+				kfree(cams);
+				return -ENOMEM;
+			}
+			dbg("%s: Allocated cams[%d].user_data=$%p (%d. bytes)",
+			     __FUNCTION__, i, up->user_data, up->user_size);
+		}
+	}
+
+	/*
+	 * Register ourselves with USB stack.
+	 */
+	strcpy(cams->drvName, (driverName != NULL) ? driverName : "Unknown");
+	cams->usbdrv.name = cams->drvName;
+	cams->usbdrv.probe = cams->cb.probe;
+	cams->usbdrv.disconnect = cams->cb.disconnect;
+	cams->usbdrv.id_table = id_table;
+
+	/*
+	 * Update global handle to usbvideo. This is very important
+	 * because probe() can be called before usb_register() returns.
+	 * If the handle is not yet updated then the probe() will fail.
+	 */
+	*pCams = cams;
+	result = usb_register(&cams->usbdrv);
+	if (result) {
+		for (i = 0; i < num_cams; i++) {
+			struct uvd *up = &cams->cam[i];
+			kfree(up->user_data);
+		}
+		kfree(cams);
+	}
+
+	return result;
+}
+
+EXPORT_SYMBOL(usbvideo_register);
+
+/*
+ * usbvideo_Deregister()
+ *
+ * Procedure frees all usbvideo and user data structures. Be warned that
+ * if you had some dynamically allocated components in ->user field then
+ * you should free them before calling here.
+ */
+void usbvideo_Deregister(struct usbvideo **pCams)
+{
+	struct usbvideo *cams;
+	int i;
+
+	if (pCams == NULL) {
+		err("%s: pCams == NULL", __FUNCTION__);
+		return;
+	}
+	cams = *pCams;
+	if (cams == NULL) {
+		err("%s: cams == NULL", __FUNCTION__);
+		return;
+	}
+
+	dbg("%s: Deregistering %s driver.", __FUNCTION__, cams->drvName);
+	usb_deregister(&cams->usbdrv);
+
+	dbg("%s: Deallocating cams=$%p (%d. cameras)", __FUNCTION__, cams, cams->num_cameras);
+	for (i=0; i < cams->num_cameras; i++) {
+		struct uvd *up = &cams->cam[i];
+		int warning = 0;
+
+		if (up->user_data != NULL) {
+			if (up->user_size <= 0)
+				++warning;
+		} else {
+			if (up->user_size > 0)
+				++warning;
+		}
+		if (warning) {
+			err("%s: Warning: user_data=$%p user_size=%d.",
+			    __FUNCTION__, up->user_data, up->user_size);
+		} else {
+			dbg("%s: Freeing %d. $%p->user_data=$%p",
+			    __FUNCTION__, i, up, up->user_data);
+			kfree(up->user_data);
+		}
+	}
+	/* Whole array was allocated in one chunk */
+	dbg("%s: Freed %d uvd structures",
+	    __FUNCTION__, cams->num_cameras);
+	kfree(cams);
+	*pCams = NULL;
+}
+
+EXPORT_SYMBOL(usbvideo_Deregister);
+
+/*
+ * usbvideo_Disconnect()
+ *
+ * This procedure stops all driver activity. Deallocation of
+ * the interface-private structure (pointed by 'ptr') is done now
+ * (if we don't have any open files) or later, when those files
+ * are closed. After that driver should be removable.
+ *
+ * This code handles surprise removal. The uvd->user is a counter which
+ * increments on open() and decrements on close(). If we see here that
+ * this counter is not 0 then we have a client who still has us opened.
+ * We set uvd->remove_pending flag as early as possible, and after that
+ * all access to the camera will gracefully fail. These failures should
+ * prompt client to (eventually) close the video device, and then - in
+ * usbvideo_v4l_close() - we decrement uvd->uvd_used and usage counter.
+ *
+ * History:
+ * 22-Jan-2000 Added polling of MOD_IN_USE to delay removal until all users gone.
+ * 27-Jan-2000 Reworked to allow pending disconnects; see xxx_close()
+ * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
+ * 19-Oct-2000 Moved to usbvideo module.
+ */
+static void usbvideo_Disconnect(struct usb_interface *intf)
+{
+	struct uvd *uvd = usb_get_intfdata (intf);
+	int i;
+
+	if (uvd == NULL) {
+		err("%s($%p): Illegal call.", __FUNCTION__, intf);
+		return;
+	}
+
+	usb_set_intfdata (intf, NULL);
+
+	usbvideo_ClientIncModCount(uvd);
+	if (uvd->debug > 0)
+		info("%s(%p.)", __FUNCTION__, intf);
+
+	mutex_lock(&uvd->lock);
+	uvd->remove_pending = 1; /* Now all ISO data will be ignored */
+
+	/* At this time we ask to cancel outstanding URBs */
+	GET_CALLBACK(uvd, stopDataPump)(uvd);
+
+	for (i=0; i < USBVIDEO_NUMSBUF; i++)
+		usb_free_urb(uvd->sbuf[i].urb);
+
+	usb_put_dev(uvd->dev);
+	uvd->dev = NULL;    	    /* USB device is no more */
+
+	video_unregister_device(&uvd->vdev);
+	if (uvd->debug > 0)
+		info("%s: Video unregistered.", __FUNCTION__);
+
+	if (uvd->user)
+		info("%s: In use, disconnect pending.", __FUNCTION__);
+	else
+		usbvideo_CameraRelease(uvd);
+	mutex_unlock(&uvd->lock);
+	info("USB camera disconnected.");
+
+	usbvideo_ClientDecModCount(uvd);
+}
+
+/*
+ * usbvideo_CameraRelease()
+ *
+ * This code does final release of uvd. This happens
+ * after the device is disconnected -and- all clients
+ * closed their files.
+ *
+ * History:
+ * 27-Jan-2000 Created.
+ */
+static void usbvideo_CameraRelease(struct uvd *uvd)
+{
+	if (uvd == NULL) {
+		err("%s: Illegal call", __FUNCTION__);
+		return;
+	}
+
+	RingQueue_Free(&uvd->dp);
+	if (VALID_CALLBACK(uvd, userFree))
+		GET_CALLBACK(uvd, userFree)(uvd);
+	uvd->uvd_used = 0;	/* This is atomic, no need to take mutex */
+}
+
+/*
+ * usbvideo_find_struct()
+ *
+ * This code searches the array of preallocated (static) structures
+ * and returns index of the first one that isn't in use. Returns -1
+ * if there are no free structures.
+ *
+ * History:
+ * 27-Jan-2000 Created.
+ */
+static int usbvideo_find_struct(struct usbvideo *cams)
+{
+	int u, rv = -1;
+
+	if (cams == NULL) {
+		err("No usbvideo handle?");
+		return -1;
+	}
+	mutex_lock(&cams->lock);
+	for (u = 0; u < cams->num_cameras; u++) {
+		struct uvd *uvd = &cams->cam[u];
+		if (!uvd->uvd_used) /* This one is free */
+		{
+			uvd->uvd_used = 1;	/* In use now */
+			mutex_init(&uvd->lock);	/* to 1 == available */
+			uvd->dev = NULL;
+			rv = u;
+			break;
+		}
+	}
+	mutex_unlock(&cams->lock);
+	return rv;
+}
+
+static struct file_operations usbvideo_fops = {
+	.owner =  THIS_MODULE,
+	.open =   usbvideo_v4l_open,
+	.release =usbvideo_v4l_close,
+	.read =   usbvideo_v4l_read,
+	.mmap =   usbvideo_v4l_mmap,
+	.ioctl =  usbvideo_v4l_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.llseek = no_llseek,
+};
+static const struct video_device usbvideo_template = {
+	.owner =      THIS_MODULE,
+	.type =       VID_TYPE_CAPTURE,
+	.hardware =   VID_HARDWARE_CPIA,
+	.fops =       &usbvideo_fops,
+};
+
+struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
+{
+	int i, devnum;
+	struct uvd *uvd = NULL;
+
+	if (cams == NULL) {
+		err("No usbvideo handle?");
+		return NULL;
+	}
+
+	devnum = usbvideo_find_struct(cams);
+	if (devnum == -1) {
+		err("IBM USB camera driver: Too many devices!");
+		return NULL;
+	}
+	uvd = &cams->cam[devnum];
+	dbg("Device entry #%d. at $%p", devnum, uvd);
+
+	/* Not relying upon caller we increase module counter ourselves */
+	usbvideo_ClientIncModCount(uvd);
+
+	mutex_lock(&uvd->lock);
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		uvd->sbuf[i].urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
+		if (uvd->sbuf[i].urb == NULL) {
+			err("usb_alloc_urb(%d.) failed.", FRAMES_PER_DESC);
+			uvd->uvd_used = 0;
+			uvd = NULL;
+			goto allocate_done;
+		}
+	}
+	uvd->user=0;
+	uvd->remove_pending = 0;
+	uvd->last_error = 0;
+	RingQueue_Initialize(&uvd->dp);
+
+	/* Initialize video device structure */
+	uvd->vdev = usbvideo_template;
+	sprintf(uvd->vdev.name, "%.20s USB Camera", cams->drvName);
+	/*
+	 * The client is free to overwrite those because we
+	 * return control to the client's probe function right now.
+	 */
+allocate_done:
+	mutex_unlock(&uvd->lock);
+	usbvideo_ClientDecModCount(uvd);
+	return uvd;
+}
+
+EXPORT_SYMBOL(usbvideo_AllocateDevice);
+
+int usbvideo_RegisterVideoDevice(struct uvd *uvd)
+{
+	char tmp1[20], tmp2[20];	/* Buffers for printing */
+
+	if (uvd == NULL) {
+		err("%s: Illegal call.", __FUNCTION__);
+		return -EINVAL;
+	}
+	if (uvd->video_endp == 0) {
+		info("%s: No video endpoint specified; data pump disabled.", __FUNCTION__);
+	}
+	if (uvd->paletteBits == 0) {
+		err("%s: No palettes specified!", __FUNCTION__);
+		return -EINVAL;
+	}
+	if (uvd->defaultPalette == 0) {
+		info("%s: No default palette!", __FUNCTION__);
+	}
+
+	uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) *
+		VIDEOSIZE_Y(uvd->canvas) * V4L_BYTES_PER_PIXEL;
+	usbvideo_VideosizeToString(tmp1, sizeof(tmp1), uvd->videosize);
+	usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas);
+
+	if (uvd->debug > 0) {
+		info("%s: iface=%d. endpoint=$%02x paletteBits=$%08lx",
+		     __FUNCTION__, uvd->iface, uvd->video_endp, uvd->paletteBits);
+	}
+	if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+		err("%s: video_register_device failed", __FUNCTION__);
+		return -EPIPE;
+	}
+	if (uvd->debug > 1) {
+		info("%s: video_register_device() successful", __FUNCTION__);
+	}
+	if (uvd->dev == NULL) {
+		err("%s: uvd->dev == NULL", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	info("%s on /dev/video%d: canvas=%s videosize=%s",
+	     (uvd->handle != NULL) ? uvd->handle->drvName : "???",
+	     uvd->vdev.minor, tmp2, tmp1);
+
+	usb_get_dev(uvd->dev);
+	return 0;
+}
+
+EXPORT_SYMBOL(usbvideo_RegisterVideoDevice);
+
+/* ******************************************************************** */
+
+static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct uvd *uvd = file->private_data;
+	unsigned long start = vma->vm_start;
+	unsigned long size  = vma->vm_end-vma->vm_start;
+	unsigned long page, pos;
+
+	if (!CAMERA_IS_OPERATIONAL(uvd))
+		return -EFAULT;
+
+	if (size > (((USBVIDEO_NUMFRAMES * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))
+		return -EINVAL;
+
+	pos = (unsigned long) uvd->fbuf;
+	while (size > 0) {
+		page = vmalloc_to_pfn((void *)pos);
+		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+			return -EAGAIN;
+
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		if (size > PAGE_SIZE)
+			size -= PAGE_SIZE;
+		else
+			size = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * usbvideo_v4l_open()
+ *
+ * This is part of Video 4 Linux API. The driver can be opened by one
+ * client only (checks internal counter 'uvdser'). The procedure
+ * then allocates buffers needed for video processing.
+ *
+ * History:
+ * 22-Jan-2000 Rewrote, moved scratch buffer allocation here. Now the
+ *             camera is also initialized here (once per connect), at
+ *             expense of V4L client (it waits on open() call).
+ * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
+ * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
+ */
+static int usbvideo_v4l_open(struct inode *inode, struct file *file)
+{
+	struct video_device *dev = video_devdata(file);
+	struct uvd *uvd = (struct uvd *) dev;
+	const int sb_size = FRAMES_PER_DESC * uvd->iso_packet_len;
+	int i, errCode = 0;
+
+	if (uvd->debug > 1)
+		info("%s($%p)", __FUNCTION__, dev);
+
+	usbvideo_ClientIncModCount(uvd);
+	mutex_lock(&uvd->lock);
+
+	if (uvd->user) {
+		err("%s: Someone tried to open an already opened device!", __FUNCTION__);
+		errCode = -EBUSY;
+	} else {
+		/* Clear statistics */
+		memset(&uvd->stats, 0, sizeof(uvd->stats));
+
+		/* Clean pointers so we know if we allocated something */
+		for (i=0; i < USBVIDEO_NUMSBUF; i++)
+			uvd->sbuf[i].data = NULL;
+
+		/* Allocate memory for the frame buffers */
+		uvd->fbuf_size = USBVIDEO_NUMFRAMES * uvd->max_frame_size;
+		uvd->fbuf = usbvideo_rvmalloc(uvd->fbuf_size);
+		RingQueue_Allocate(&uvd->dp, RING_QUEUE_SIZE);
+		if ((uvd->fbuf == NULL) ||
+		    (!RingQueue_IsAllocated(&uvd->dp))) {
+			err("%s: Failed to allocate fbuf or dp", __FUNCTION__);
+			errCode = -ENOMEM;
+		} else {
+			/* Allocate all buffers */
+			for (i=0; i < USBVIDEO_NUMFRAMES; i++) {
+				uvd->frame[i].frameState = FrameState_Unused;
+				uvd->frame[i].data = uvd->fbuf + i*(uvd->max_frame_size);
+				/*
+				 * Set default sizes in case IOCTL (VIDIOCMCAPTURE)
+				 * is not used (using read() instead).
+				 */
+				uvd->frame[i].canvas = uvd->canvas;
+				uvd->frame[i].seqRead_Index = 0;
+			}
+			for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+				uvd->sbuf[i].data = kmalloc(sb_size, GFP_KERNEL);
+				if (uvd->sbuf[i].data == NULL) {
+					errCode = -ENOMEM;
+					break;
+				}
+			}
+		}
+		if (errCode != 0) {
+			/* Have to free all that memory */
+			if (uvd->fbuf != NULL) {
+				usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
+				uvd->fbuf = NULL;
+			}
+			RingQueue_Free(&uvd->dp);
+			for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+				kfree(uvd->sbuf[i].data);
+				uvd->sbuf[i].data = NULL;
+			}
+		}
+	}
+
+	/* If so far no errors then we shall start the camera */
+	if (errCode == 0) {
+		/* Start data pump if we have valid endpoint */
+		if (uvd->video_endp != 0)
+			errCode = GET_CALLBACK(uvd, startDataPump)(uvd);
+		if (errCode == 0) {
+			if (VALID_CALLBACK(uvd, setupOnOpen)) {
+				if (uvd->debug > 1)
+					info("%s: setupOnOpen callback", __FUNCTION__);
+				errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd);
+				if (errCode < 0) {
+					err("%s: setupOnOpen callback failed (%d.).",
+					    __FUNCTION__, errCode);
+				} else if (uvd->debug > 1) {
+					info("%s: setupOnOpen callback successful", __FUNCTION__);
+				}
+			}
+			if (errCode == 0) {
+				uvd->settingsAdjusted = 0;
+				if (uvd->debug > 1)
+					info("%s: Open succeeded.", __FUNCTION__);
+				uvd->user++;
+				file->private_data = uvd;
+			}
+		}
+	}
+	mutex_unlock(&uvd->lock);
+	if (errCode != 0)
+		usbvideo_ClientDecModCount(uvd);
+	if (uvd->debug > 0)
+		info("%s: Returning %d.", __FUNCTION__, errCode);
+	return errCode;
+}
+
+/*
+ * usbvideo_v4l_close()
+ *
+ * This is part of Video 4 Linux API. The procedure
+ * stops streaming and deallocates all buffers that were earlier
+ * allocated in usbvideo_v4l_open().
+ *
+ * History:
+ * 22-Jan-2000 Moved scratch buffer deallocation here.
+ * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
+ * 24-May-2000 Moved MOD_DEC_USE_COUNT outside of code that can sleep.
+ */
+static int usbvideo_v4l_close(struct inode *inode, struct file *file)
+{
+	struct video_device *dev = file->private_data;
+	struct uvd *uvd = (struct uvd *) dev;
+	int i;
+
+	if (uvd->debug > 1)
+		info("%s($%p)", __FUNCTION__, dev);
+
+	mutex_lock(&uvd->lock);
+	GET_CALLBACK(uvd, stopDataPump)(uvd);
+	usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
+	uvd->fbuf = NULL;
+	RingQueue_Free(&uvd->dp);
+
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		kfree(uvd->sbuf[i].data);
+		uvd->sbuf[i].data = NULL;
+	}
+
+#if USBVIDEO_REPORT_STATS
+	usbvideo_ReportStatistics(uvd);
+#endif
+
+	uvd->user--;
+	if (uvd->remove_pending) {
+		if (uvd->debug > 0)
+			info("usbvideo_v4l_close: Final disconnect.");
+		usbvideo_CameraRelease(uvd);
+	}
+	mutex_unlock(&uvd->lock);
+	usbvideo_ClientDecModCount(uvd);
+
+	if (uvd->debug > 1)
+		info("%s: Completed.", __FUNCTION__);
+	file->private_data = NULL;
+	return 0;
+}
+
+/*
+ * usbvideo_v4l_ioctl()
+ *
+ * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
+ *
+ * History:
+ * 22-Jan-2000 Corrected VIDIOCSPICT to reject unsupported settings.
+ */
+static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file,
+				 unsigned int cmd, void *arg)
+{
+	struct uvd *uvd = file->private_data;
+
+	if (!CAMERA_IS_OPERATIONAL(uvd))
+		return -EIO;
+
+	switch (cmd) {
+		case VIDIOCGCAP:
+		{
+			struct video_capability *b = arg;
+			*b = uvd->vcap;
+			return 0;
+		}
+		case VIDIOCGCHAN:
+		{
+			struct video_channel *v = arg;
+			*v = uvd->vchan;
+			return 0;
+		}
+		case VIDIOCSCHAN:
+		{
+			struct video_channel *v = arg;
+			if (v->channel != 0)
+				return -EINVAL;
+			return 0;
+		}
+		case VIDIOCGPICT:
+		{
+			struct video_picture *pic = arg;
+			*pic = uvd->vpic;
+			return 0;
+		}
+		case VIDIOCSPICT:
+		{
+			struct video_picture *pic = arg;
+			/*
+			 * Use temporary 'video_picture' structure to preserve our
+			 * own settings (such as color depth, palette) that we
+			 * aren't allowing everyone (V4L client) to change.
+			 */
+			uvd->vpic.brightness = pic->brightness;
+			uvd->vpic.hue = pic->hue;
+			uvd->vpic.colour = pic->colour;
+			uvd->vpic.contrast = pic->contrast;
+			uvd->settingsAdjusted = 0;	/* Will force new settings */
+			return 0;
+		}
+		case VIDIOCSWIN:
+		{
+			struct video_window *vw = arg;
+
+			if(VALID_CALLBACK(uvd, setVideoMode)) {
+				return GET_CALLBACK(uvd, setVideoMode)(uvd, vw);
+			}
+
+			if (vw->flags)
+				return -EINVAL;
+			if (vw->clipcount)
+				return -EINVAL;
+			if (vw->width != VIDEOSIZE_X(uvd->canvas))
+				return -EINVAL;
+			if (vw->height != VIDEOSIZE_Y(uvd->canvas))
+				return -EINVAL;
+
+			return 0;
+		}
+		case VIDIOCGWIN:
+		{
+			struct video_window *vw = arg;
+
+			vw->x = 0;
+			vw->y = 0;
+			vw->width = VIDEOSIZE_X(uvd->videosize);
+			vw->height = VIDEOSIZE_Y(uvd->videosize);
+			vw->chromakey = 0;
+			if (VALID_CALLBACK(uvd, getFPS))
+				vw->flags = GET_CALLBACK(uvd, getFPS)(uvd);
+			else
+				vw->flags = 10; /* FIXME: do better! */
+			return 0;
+		}
+		case VIDIOCGMBUF:
+		{
+			struct video_mbuf *vm = arg;
+			int i;
+
+			memset(vm, 0, sizeof(*vm));
+			vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES;
+			vm->frames = USBVIDEO_NUMFRAMES;
+			for(i = 0; i < USBVIDEO_NUMFRAMES; i++)
+			  vm->offsets[i] = i * uvd->max_frame_size;
+
+			return 0;
+		}
+		case VIDIOCMCAPTURE:
+		{
+			struct video_mmap *vm = arg;
+
+			if (uvd->debug >= 1) {
+				info("VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.",
+				     vm->frame, vm->width, vm->height, vm->format);
+			}
+			/*
+			 * Check if the requested size is supported. If the requestor
+			 * requests too big a frame then we may be tricked into accessing
+			 * outside of own preallocated frame buffer (in uvd->frame).
+			 * This will cause oops or a security hole. Theoretically, we
+			 * could only clamp the size down to acceptable bounds, but then
+			 * we'd need to figure out how to insert our smaller buffer into
+			 * larger caller's buffer... this is not an easy question. So we
+			 * here just flatly reject too large requests, assuming that the
+			 * caller will resubmit with smaller size. Callers should know
+			 * what size we support (returned by VIDIOCGCAP). However vidcat,
+			 * for one, does not care and allows to ask for any size.
+			 */
+			if ((vm->width > VIDEOSIZE_X(uvd->canvas)) ||
+			    (vm->height > VIDEOSIZE_Y(uvd->canvas))) {
+				if (uvd->debug > 0) {
+					info("VIDIOCMCAPTURE: Size=%dx%d too large; "
+					     "allowed only up to %ldx%ld", vm->width, vm->height,
+					     VIDEOSIZE_X(uvd->canvas), VIDEOSIZE_Y(uvd->canvas));
+				}
+				return -EINVAL;
+			}
+			/* Check if the palette is supported */
+			if (((1L << vm->format) & uvd->paletteBits) == 0) {
+				if (uvd->debug > 0) {
+					info("VIDIOCMCAPTURE: format=%d. not supported"
+					     " (paletteBits=$%08lx)",
+					     vm->format, uvd->paletteBits);
+				}
+				return -EINVAL;
+			}
+			if ((vm->frame < 0) || (vm->frame >= USBVIDEO_NUMFRAMES)) {
+				err("VIDIOCMCAPTURE: vm.frame=%d. !E [0-%d]", vm->frame, USBVIDEO_NUMFRAMES-1);
+				return -EINVAL;
+			}
+			if (uvd->frame[vm->frame].frameState == FrameState_Grabbing) {
+				/* Not an error - can happen */
+			}
+			uvd->frame[vm->frame].request = VIDEOSIZE(vm->width, vm->height);
+			uvd->frame[vm->frame].palette = vm->format;
+
+			/* Mark it as ready */
+			uvd->frame[vm->frame].frameState = FrameState_Ready;
+
+			return usbvideo_NewFrame(uvd, vm->frame);
+		}
+		case VIDIOCSYNC:
+		{
+			int *frameNum = arg;
+			int ret;
+
+			if (*frameNum < 0 || *frameNum >= USBVIDEO_NUMFRAMES)
+				return -EINVAL;
+
+			if (uvd->debug >= 1)
+				info("VIDIOCSYNC: syncing to frame %d.", *frameNum);
+			if (uvd->flags & FLAGS_NO_DECODING)
+				ret = usbvideo_GetFrame(uvd, *frameNum);
+			else if (VALID_CALLBACK(uvd, getFrame)) {
+				ret = GET_CALLBACK(uvd, getFrame)(uvd, *frameNum);
+				if ((ret < 0) && (uvd->debug >= 1)) {
+					err("VIDIOCSYNC: getFrame() returned %d.", ret);
+				}
+			} else {
+				err("VIDIOCSYNC: getFrame is not set");
+				ret = -EFAULT;
+			}
+
+			/*
+			 * The frame is in FrameState_Done_Hold state. Release it
+			 * right now because its data is already mapped into
+			 * the user space and it's up to the application to
+			 * make use of it until it asks for another frame.
+			 */
+			uvd->frame[*frameNum].frameState = FrameState_Unused;
+			return ret;
+		}
+		case VIDIOCGFBUF:
+		{
+			struct video_buffer *vb = arg;
+
+			memset(vb, 0, sizeof(*vb));
+			return 0;
+		}
+		case VIDIOCKEY:
+			return 0;
+
+		case VIDIOCCAPTURE:
+			return -EINVAL;
+
+		case VIDIOCSFBUF:
+
+		case VIDIOCGTUNER:
+		case VIDIOCSTUNER:
+
+		case VIDIOCGFREQ:
+		case VIDIOCSFREQ:
+
+		case VIDIOCGAUDIO:
+		case VIDIOCSAUDIO:
+			return -EINVAL;
+
+		default:
+			return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static int usbvideo_v4l_ioctl(struct inode *inode, struct file *file,
+		       unsigned int cmd, unsigned long arg)
+{
+	return video_usercopy(inode, file, cmd, arg, usbvideo_v4l_do_ioctl);
+}
+
+/*
+ * usbvideo_v4l_read()
+ *
+ * This is mostly boring stuff. We simply ask for a frame and when it
+ * arrives copy all the video data from it into user space. There is
+ * no obvious need to override this method.
+ *
+ * History:
+ * 20-Oct-2000 Created.
+ * 01-Nov-2000 Added mutex (uvd->lock).
+ */
+static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
+		      size_t count, loff_t *ppos)
+{
+	struct uvd *uvd = file->private_data;
+	int noblock = file->f_flags & O_NONBLOCK;
+	int frmx = -1, i;
+	struct usbvideo_frame *frame;
+
+	if (!CAMERA_IS_OPERATIONAL(uvd) || (buf == NULL))
+		return -EFAULT;
+
+	if (uvd->debug >= 1)
+		info("%s: %Zd. bytes, noblock=%d.", __FUNCTION__, count, noblock);
+
+	mutex_lock(&uvd->lock);
+
+	/* See if a frame is completed, then use it. */
+	for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
+		if ((uvd->frame[i].frameState == FrameState_Done) ||
+		    (uvd->frame[i].frameState == FrameState_Done_Hold) ||
+		    (uvd->frame[i].frameState == FrameState_Error)) {
+			frmx = i;
+			break;
+		}
+	}
+
+	/* FIXME: If we don't start a frame here then who ever does? */
+	if (noblock && (frmx == -1)) {
+		count = -EAGAIN;
+		goto read_done;
+	}
+
+	/*
+	 * If no FrameState_Done, look for a FrameState_Grabbing state.
+	 * See if a frame is in process (grabbing), then use it.
+	 * We will need to wait until it becomes cooked, of course.
+	 */
+	if (frmx == -1) {
+		for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
+			if (uvd->frame[i].frameState == FrameState_Grabbing) {
+				frmx = i;
+				break;
+			}
+		}
+	}
+
+	/*
+	 * If no frame is active, start one. We don't care which one
+	 * it will be, so #0 is as good as any.
+	 * In read access mode we don't have convenience of VIDIOCMCAPTURE
+	 * to specify the requested palette (video format) on per-frame
+	 * basis. This means that we have to return data in -some- format
+	 * and just hope that the client knows what to do with it.
+	 * The default format is configured in uvd->defaultPalette field
+	 * as one of VIDEO_PALETTE_xxx values. We stuff it into the new
+	 * frame and initiate the frame filling process.
+	 */
+	if (frmx == -1) {
+		if (uvd->defaultPalette == 0) {
+			err("%s: No default palette; don't know what to do!", __FUNCTION__);
+			count = -EFAULT;
+			goto read_done;
+		}
+		frmx = 0;
+		/*
+		 * We have no per-frame control over video size.
+		 * Therefore we only can use whatever size was
+		 * specified as default.
+		 */
+		uvd->frame[frmx].request = uvd->videosize;
+		uvd->frame[frmx].palette = uvd->defaultPalette;
+		uvd->frame[frmx].frameState = FrameState_Ready;
+		usbvideo_NewFrame(uvd, frmx);
+		/* Now frame 0 is supposed to start filling... */
+	}
+
+	/*
+	 * Get a pointer to the active frame. It is either previously
+	 * completed frame or frame in progress but not completed yet.
+	 */
+	frame = &uvd->frame[frmx];
+
+	/*
+	 * Sit back & wait until the frame gets filled and postprocessed.
+	 * If we fail to get the picture [in time] then return the error.
+	 * In this call we specify that we want the frame to be waited for,
+	 * postprocessed and switched into FrameState_Done_Hold state. This
+	 * state is used to hold the frame as "fully completed" between
+	 * subsequent partial reads of the same frame.
+	 */
+	if (frame->frameState != FrameState_Done_Hold) {
+		long rv = -EFAULT;
+		if (uvd->flags & FLAGS_NO_DECODING)
+			rv = usbvideo_GetFrame(uvd, frmx);
+		else if (VALID_CALLBACK(uvd, getFrame))
+			rv = GET_CALLBACK(uvd, getFrame)(uvd, frmx);
+		else
+			err("getFrame is not set");
+		if ((rv != 0) || (frame->frameState != FrameState_Done_Hold)) {
+			count = rv;
+			goto read_done;
+		}
+	}
+
+	/*
+	 * Copy bytes to user space. We allow for partial reads, which
+	 * means that the user application can request read less than
+	 * the full frame size. It is up to the application to issue
+	 * subsequent calls until entire frame is read.
+	 *
+	 * First things first, make sure we don't copy more than we
+	 * have - even if the application wants more. That would be
+	 * a big security embarassment!
+	 */
+	if ((count + frame->seqRead_Index) > frame->seqRead_Length)
+		count = frame->seqRead_Length - frame->seqRead_Index;
+
+	/*
+	 * Copy requested amount of data to user space. We start
+	 * copying from the position where we last left it, which
+	 * will be zero for a new frame (not read before).
+	 */
+	if (copy_to_user(buf, frame->data + frame->seqRead_Index, count)) {
+		count = -EFAULT;
+		goto read_done;
+	}
+
+	/* Update last read position */
+	frame->seqRead_Index += count;
+	if (uvd->debug >= 1) {
+		err("%s: {copy} count used=%Zd, new seqRead_Index=%ld",
+			__FUNCTION__, count, frame->seqRead_Index);
+	}
+
+	/* Finally check if the frame is done with and "release" it */
+	if (frame->seqRead_Index >= frame->seqRead_Length) {
+		/* All data has been read */
+		frame->seqRead_Index = 0;
+
+		/* Mark it as available to be used again. */
+		uvd->frame[frmx].frameState = FrameState_Unused;
+		if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) {
+			err("%s: usbvideo_NewFrame failed.", __FUNCTION__);
+		}
+	}
+read_done:
+	mutex_unlock(&uvd->lock);
+	return count;
+}
+
+/*
+ * Make all of the blocks of data contiguous
+ */
+static int usbvideo_CompressIsochronous(struct uvd *uvd, struct urb *urb)
+{
+	char *cdata;
+	int i, totlen = 0;
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		int n = urb->iso_frame_desc[i].actual_length;
+		int st = urb->iso_frame_desc[i].status;
+
+		cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+
+		/* Detect and ignore errored packets */
+		if (st < 0) {
+			if (uvd->debug >= 1)
+				err("Data error: packet=%d. len=%d. status=%d.", i, n, st);
+			uvd->stats.iso_err_count++;
+			continue;
+		}
+
+		/* Detect and ignore empty packets */
+		if (n <= 0) {
+			uvd->stats.iso_skip_count++;
+			continue;
+		}
+		totlen += n;	/* Little local accounting */
+		RingQueue_Enqueue(&uvd->dp, cdata, n);
+	}
+	return totlen;
+}
+
+static void usbvideo_IsocIrq(struct urb *urb, struct pt_regs *regs)
+{
+	int i, ret, len;
+	struct uvd *uvd = urb->context;
+
+	/* We don't want to do anything if we are about to be removed! */
+	if (!CAMERA_IS_OPERATIONAL(uvd))
+		return;
+#if 0
+	if (urb->actual_length > 0) {
+		info("urb=$%p status=%d. errcount=%d. length=%d.",
+		     urb, urb->status, urb->error_count, urb->actual_length);
+	} else {
+		static int c = 0;
+		if (c++ % 100 == 0)
+			info("No Isoc data");
+	}
+#endif
+
+	if (!uvd->streaming) {
+		if (uvd->debug >= 1)
+			info("Not streaming, but interrupt!");
+		return;
+	}
+
+	uvd->stats.urb_count++;
+	if (urb->actual_length <= 0)
+		goto urb_done_with;
+
+	/* Copy the data received into ring queue */
+	len = usbvideo_CompressIsochronous(uvd, urb);
+	uvd->stats.urb_length = len;
+	if (len <= 0)
+		goto urb_done_with;
+
+	/* Here we got some data */
+	uvd->stats.data_count += len;
+	RingQueue_WakeUpInterruptible(&uvd->dp);
+
+urb_done_with:
+	for (i = 0; i < FRAMES_PER_DESC; i++) {
+		urb->iso_frame_desc[i].status = 0;
+		urb->iso_frame_desc[i].actual_length = 0;
+	}
+	urb->status = 0;
+	urb->dev = uvd->dev;
+	ret = usb_submit_urb (urb, GFP_KERNEL);
+	if(ret)
+		err("usb_submit_urb error (%d)", ret);
+	return;
+}
+
+/*
+ * usbvideo_StartDataPump()
+ *
+ * History:
+ * 27-Jan-2000 Used ibmcam->iface, ibmcam->ifaceAltActive instead
+ *             of hardcoded values. Simplified by using for loop,
+ *             allowed any number of URBs.
+ */
+static int usbvideo_StartDataPump(struct uvd *uvd)
+{
+	struct usb_device *dev = uvd->dev;
+	int i, errFlag;
+
+	if (uvd->debug > 1)
+		info("%s($%p)", __FUNCTION__, uvd);
+
+	if (!CAMERA_IS_OPERATIONAL(uvd)) {
+		err("%s: Camera is not operational", __FUNCTION__);
+		return -EFAULT;
+	}
+	uvd->curframe = -1;
+
+	/* Alternate interface 1 is is the biggest frame size */
+	i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive);
+	if (i < 0) {
+		err("%s: usb_set_interface error", __FUNCTION__);
+		uvd->last_error = i;
+		return -EBUSY;
+	}
+	if (VALID_CALLBACK(uvd, videoStart))
+		GET_CALLBACK(uvd, videoStart)(uvd);
+	else
+		err("%s: videoStart not set", __FUNCTION__);
+
+	/* We double buffer the Iso lists */
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		int j, k;
+		struct urb *urb = uvd->sbuf[i].urb;
+		urb->dev = dev;
+		urb->context = uvd;
+		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp);
+		urb->interval = 1;
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->transfer_buffer = uvd->sbuf[i].data;
+		urb->complete = usbvideo_IsocIrq;
+		urb->number_of_packets = FRAMES_PER_DESC;
+		urb->transfer_buffer_length = uvd->iso_packet_len * FRAMES_PER_DESC;
+		for (j=k=0; j < FRAMES_PER_DESC; j++, k += uvd->iso_packet_len) {
+			urb->iso_frame_desc[j].offset = k;
+			urb->iso_frame_desc[j].length = uvd->iso_packet_len;
+		}
+	}
+
+	/* Submit all URBs */
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
+		if (errFlag)
+			err("%s: usb_submit_isoc(%d) ret %d", __FUNCTION__, i, errFlag);
+	}
+
+	uvd->streaming = 1;
+	if (uvd->debug > 1)
+		info("%s: streaming=1 video_endp=$%02x", __FUNCTION__, uvd->video_endp);
+	return 0;
+}
+
+/*
+ * usbvideo_StopDataPump()
+ *
+ * This procedure stops streaming and deallocates URBs. Then it
+ * activates zero-bandwidth alt. setting of the video interface.
+ *
+ * History:
+ * 22-Jan-2000 Corrected order of actions to work after surprise removal.
+ * 27-Jan-2000 Used uvd->iface, uvd->ifaceAltInactive instead of hardcoded values.
+ */
+static void usbvideo_StopDataPump(struct uvd *uvd)
+{
+	int i, j;
+
+	if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
+		return;
+
+	if (uvd->debug > 1)
+		info("%s($%p)", __FUNCTION__, uvd);
+
+	/* Unschedule all of the iso td's */
+	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+		usb_kill_urb(uvd->sbuf[i].urb);
+	}
+	if (uvd->debug > 1)
+		info("%s: streaming=0", __FUNCTION__);
+	uvd->streaming = 0;
+
+	if (!uvd->remove_pending) {
+		/* Invoke minidriver's magic to stop the camera */
+		if (VALID_CALLBACK(uvd, videoStop))
+			GET_CALLBACK(uvd, videoStop)(uvd);
+		else
+			err("%s: videoStop not set", __FUNCTION__);
+
+		/* Set packet size to 0 */
+		j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive);
+		if (j < 0) {
+			err("%s: usb_set_interface() error %d.", __FUNCTION__, j);
+			uvd->last_error = j;
+		}
+	}
+}
+
+/*
+ * usbvideo_NewFrame()
+ *
+ * History:
+ * 29-Mar-00 Added copying of previous frame into the current one.
+ * 6-Aug-00  Added model 3 video sizes, removed redundant width, height.
+ */
+static int usbvideo_NewFrame(struct uvd *uvd, int framenum)
+{
+	struct usbvideo_frame *frame;
+	int n;
+
+	if (uvd->debug > 1)
+		info("usbvideo_NewFrame($%p,%d.)", uvd, framenum);
+
+	/* If we're not grabbing a frame right now and the other frame is */
+	/*  ready to be grabbed into, then use it instead */
+	if (uvd->curframe != -1)
+		return 0;
+
+	/* If necessary we adjust picture settings between frames */
+	if (!uvd->settingsAdjusted) {
+		if (VALID_CALLBACK(uvd, adjustPicture))
+			GET_CALLBACK(uvd, adjustPicture)(uvd);
+		uvd->settingsAdjusted = 1;
+	}
+
+	n = (framenum + 1) % USBVIDEO_NUMFRAMES;
+	if (uvd->frame[n].frameState == FrameState_Ready)
+		framenum = n;
+
+	frame = &uvd->frame[framenum];
+
+	frame->frameState = FrameState_Grabbing;
+	frame->scanstate = ScanState_Scanning;
+	frame->seqRead_Length = 0;	/* Accumulated in xxx_parse_data() */
+	frame->deinterlace = Deinterlace_None;
+	frame->flags = 0; /* No flags yet, up to minidriver (or us) to set them */
+	uvd->curframe = framenum;
+
+	/*
+	 * Normally we would want to copy previous frame into the current one
+	 * before we even start filling it with data; this allows us to stop
+	 * filling at any moment; top portion of the frame will be new and
+	 * bottom portion will stay as it was in previous frame. If we don't
+	 * do that then missing chunks of video stream will result in flickering
+	 * portions of old data whatever it was before.
+	 *
+	 * If we choose not to copy previous frame (to, for example, save few
+	 * bus cycles - the frame can be pretty large!) then we have an option
+	 * to clear the frame before using. If we experience losses in this
+	 * mode then missing picture will be black (no flickering).
+	 *
+	 * Finally, if user chooses not to clean the current frame before
+	 * filling it with data then the old data will be visible if we fail
+	 * to refill entire frame with new data.
+	 */
+	if (!(uvd->flags & FLAGS_SEPARATE_FRAMES)) {
+		/* This copies previous frame into this one to mask losses */
+		int prev = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES;
+		memmove(frame->data, uvd->frame[prev].data, uvd->max_frame_size);
+	} else {
+		if (uvd->flags & FLAGS_CLEAN_FRAMES) {
+			/* This provides a "clean" frame but slows things down */
+			memset(frame->data, 0, uvd->max_frame_size);
+		}
+	}
+	return 0;
+}
+
+/*
+ * usbvideo_CollectRawData()
+ *
+ * This procedure can be used instead of 'processData' callback if you
+ * only want to dump the raw data from the camera into the output
+ * device (frame buffer). You can look at it with V4L client, but the
+ * image will be unwatchable. The main purpose of this code and of the
+ * mode FLAGS_NO_DECODING is debugging and capturing of datastreams from
+ * new, unknown cameras. This procedure will be automatically invoked
+ * instead of the specified callback handler when uvd->flags has bit
+ * FLAGS_NO_DECODING set. Therefore, any regular build of any driver
+ * based on usbvideo can use this feature at any time.
+ */
+static void usbvideo_CollectRawData(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+	int n;
+
+	assert(uvd != NULL);
+	assert(frame != NULL);
+
+	/* Try to move data from queue into frame buffer */
+	n = RingQueue_GetLength(&uvd->dp);
+	if (n > 0) {
+		int m;
+		/* See how much space we have left */
+		m = uvd->max_frame_size - frame->seqRead_Length;
+		if (n > m)
+			n = m;
+		/* Now move that much data into frame buffer */
+		RingQueue_Dequeue(
+			&uvd->dp,
+			frame->data + frame->seqRead_Length,
+			m);
+		frame->seqRead_Length += m;
+	}
+	/* See if we filled the frame */
+	if (frame->seqRead_Length >= uvd->max_frame_size) {
+		frame->frameState = FrameState_Done;
+		uvd->curframe = -1;
+		uvd->stats.frame_num++;
+	}
+}
+
+static int usbvideo_GetFrame(struct uvd *uvd, int frameNum)
+{
+	struct usbvideo_frame *frame = &uvd->frame[frameNum];
+
+	if (uvd->debug >= 2)
+		info("%s($%p,%d.)", __FUNCTION__, uvd, frameNum);
+
+	switch (frame->frameState) {
+	case FrameState_Unused:
+		if (uvd->debug >= 2)
+			info("%s: FrameState_Unused", __FUNCTION__);
+		return -EINVAL;
+	case FrameState_Ready:
+	case FrameState_Grabbing:
+	case FrameState_Error:
+	{
+		int ntries, signalPending;
+	redo:
+		if (!CAMERA_IS_OPERATIONAL(uvd)) {
+			if (uvd->debug >= 2)
+				info("%s: Camera is not operational (1)", __FUNCTION__);
+			return -EIO;
+		}
+		ntries = 0;
+		do {
+			RingQueue_InterruptibleSleepOn(&uvd->dp);
+			signalPending = signal_pending(current);
+			if (!CAMERA_IS_OPERATIONAL(uvd)) {
+				if (uvd->debug >= 2)
+					info("%s: Camera is not operational (2)", __FUNCTION__);
+				return -EIO;
+			}
+			assert(uvd->fbuf != NULL);
+			if (signalPending) {
+				if (uvd->debug >= 2)
+					info("%s: Signal=$%08x", __FUNCTION__, signalPending);
+				if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) {
+					usbvideo_TestPattern(uvd, 1, 0);
+					uvd->curframe = -1;
+					uvd->stats.frame_num++;
+					if (uvd->debug >= 2)
+						info("%s: Forced test pattern screen", __FUNCTION__);
+					return 0;
+				} else {
+					/* Standard answer: Interrupted! */
+					if (uvd->debug >= 2)
+						info("%s: Interrupted!", __FUNCTION__);
+					return -EINTR;
+				}
+			} else {
+				/* No signals - we just got new data in dp queue */
+				if (uvd->flags & FLAGS_NO_DECODING)
+					usbvideo_CollectRawData(uvd, frame);
+				else if (VALID_CALLBACK(uvd, processData))
+					GET_CALLBACK(uvd, processData)(uvd, frame);
+				else
+					err("%s: processData not set", __FUNCTION__);
+			}
+		} while (frame->frameState == FrameState_Grabbing);
+		if (uvd->debug >= 2) {
+			info("%s: Grabbing done; state=%d. (%lu. bytes)",
+			     __FUNCTION__, frame->frameState, frame->seqRead_Length);
+		}
+		if (frame->frameState == FrameState_Error) {
+			int ret = usbvideo_NewFrame(uvd, frameNum);
+			if (ret < 0) {
+				err("%s: usbvideo_NewFrame() failed (%d.)", __FUNCTION__, ret);
+				return ret;
+			}
+			goto redo;
+		}
+		/* Note that we fall through to meet our destiny below */
+	}
+	case FrameState_Done:
+		/*
+		 * Do all necessary postprocessing of data prepared in
+		 * "interrupt" code and the collecting code above. The
+		 * frame gets marked as FrameState_Done by queue parsing code.
+		 * This status means that we collected enough data and
+		 * most likely processed it as we went through. However
+		 * the data may need postprocessing, such as deinterlacing
+		 * or picture adjustments implemented in software (horror!)
+		 *
+		 * As soon as the frame becomes "final" it gets promoted to
+		 * FrameState_Done_Hold status where it will remain until the
+		 * caller consumed all the video data from the frame. Then
+		 * the empty shell of ex-frame is thrown out for dogs to eat.
+		 * But we, worried about pets, will recycle the frame!
+		 */
+		uvd->stats.frame_num++;
+		if ((uvd->flags & FLAGS_NO_DECODING) == 0) {
+			if (VALID_CALLBACK(uvd, postProcess))
+				GET_CALLBACK(uvd, postProcess)(uvd, frame);
+			if (frame->flags & USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST)
+				usbvideo_SoftwareContrastAdjustment(uvd, frame);
+		}
+		frame->frameState = FrameState_Done_Hold;
+		if (uvd->debug >= 2)
+			info("%s: Entered FrameState_Done_Hold state.", __FUNCTION__);
+		return 0;
+
+	case FrameState_Done_Hold:
+		/*
+		 * We stay in this state indefinitely until someone external,
+		 * like ioctl() or read() call finishes digesting the frame
+		 * data. Then it will mark the frame as FrameState_Unused and
+		 * it will be released back into the wild to roam freely.
+		 */
+		if (uvd->debug >= 2)
+			info("%s: FrameState_Done_Hold state.", __FUNCTION__);
+		return 0;
+	}
+
+	/* Catch-all for other cases. We shall not be here. */
+	err("%s: Invalid state %d.", __FUNCTION__, frame->frameState);
+	frame->frameState = FrameState_Unused;
+	return 0;
+}
+
+/*
+ * usbvideo_DeinterlaceFrame()
+ *
+ * This procedure deinterlaces the given frame. Some cameras produce
+ * only half of scanlines - sometimes only even lines, sometimes only
+ * odd lines. The deinterlacing method is stored in frame->deinterlace
+ * variable.
+ *
+ * Here we scan the frame vertically and replace missing scanlines with
+ * average between surrounding ones - before and after. If we have no
+ * line above then we just copy next line. Similarly, if we need to
+ * create a last line then preceding line is used.
+ */
+void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+	if ((uvd == NULL) || (frame == NULL))
+		return;
+
+	if ((frame->deinterlace == Deinterlace_FillEvenLines) ||
+	    (frame->deinterlace == Deinterlace_FillOddLines))
+	{
+		const int v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+		int i = (frame->deinterlace == Deinterlace_FillEvenLines) ? 0 : 1;
+
+		for (; i < VIDEOSIZE_Y(frame->request); i += 2) {
+			const unsigned char *fs1, *fs2;
+			unsigned char *fd;
+			int ip, in, j;	/* Previous and next lines */
+
+			/*
+			 * Need to average lines before and after 'i'.
+			 * If we go out of bounds seeking those lines then
+			 * we point back to existing line.
+			 */
+			ip = i - 1;	/* First, get rough numbers */
+			in = i + 1;
+
+			/* Now validate */
+			if (ip < 0)
+				ip = in;
+			if (in >= VIDEOSIZE_Y(frame->request))
+				in = ip;
+
+			/* Sanity check */
+			if ((ip < 0) || (in < 0) ||
+			    (ip >= VIDEOSIZE_Y(frame->request)) ||
+			    (in >= VIDEOSIZE_Y(frame->request)))
+			{
+				err("Error: ip=%d. in=%d. req.height=%ld.",
+				    ip, in, VIDEOSIZE_Y(frame->request));
+				break;
+			}
+
+			/* Now we need to average lines 'ip' and 'in' to produce line 'i' */
+			fs1 = frame->data + (v4l_linesize * ip);
+			fs2 = frame->data + (v4l_linesize * in);
+			fd = frame->data + (v4l_linesize * i);
+
+			/* Average lines around destination */
+			for (j=0; j < v4l_linesize; j++) {
+				fd[j] = (unsigned char)((((unsigned) fs1[j]) +
+							 ((unsigned)fs2[j])) >> 1);
+			}
+		}
+	}
+
+	/* Optionally display statistics on the screen */
+	if (uvd->flags & FLAGS_OVERLAY_STATS)
+		usbvideo_OverlayStats(uvd, frame);
+}
+
+EXPORT_SYMBOL(usbvideo_DeinterlaceFrame);
+
+/*
+ * usbvideo_SoftwareContrastAdjustment()
+ *
+ * This code adjusts the contrast of the frame, assuming RGB24 format.
+ * As most software image processing, this job is CPU-intensive.
+ * Get a camera that supports hardware adjustment!
+ *
+ * History:
+ * 09-Feb-2001  Created.
+ */
+static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
+						struct usbvideo_frame *frame)
+{
+	int i, j, v4l_linesize;
+	signed long adj;
+	const int ccm = 128; /* Color correction median - see below */
+
+	if ((uvd == NULL) || (frame == NULL)) {
+		err("%s: Illegal call.", __FUNCTION__);
+		return;
+	}
+	adj = (uvd->vpic.contrast - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
+	RESTRICT_TO_RANGE(adj, -ccm, ccm+1);
+	if (adj == 0) {
+		/* In rare case of no adjustment */
+		return;
+	}
+	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+	for (i=0; i < VIDEOSIZE_Y(frame->request); i++) {
+		unsigned char *fd = frame->data + (v4l_linesize * i);
+		for (j=0; j < v4l_linesize; j++) {
+			signed long v = (signed long) fd[j];
+			/* Magnify up to 2 times, reduce down to zero */
+			v = 128 + ((ccm + adj) * (v - 128)) / ccm;
+			RESTRICT_TO_RANGE(v, 0, 0xFF); /* Must flatten tails */
+			fd[j] = (unsigned char) v;
+		}
+	}
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/usbvideo/usbvideo.h b/drivers/media/video/usbvideo/usbvideo.h
new file mode 100644
index 000000000000..3cbf4fc499a3
--- /dev/null
+++ b/drivers/media/video/usbvideo/usbvideo.h
@@ -0,0 +1,394 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef usbvideo_h
+#define	usbvideo_h
+
+#include <linux/config.h>
+#include <linux/videodev.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+
+/* Most helpful debugging aid */
+#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__))))
+
+#define USBVIDEO_REPORT_STATS	1	/* Set to 0 to block statistics on close */
+
+/* Bit flags (options) */
+#define FLAGS_RETRY_VIDIOCSYNC		(1 << 0)
+#define	FLAGS_MONOCHROME		(1 << 1)
+#define FLAGS_DISPLAY_HINTS		(1 << 2)
+#define FLAGS_OVERLAY_STATS		(1 << 3)
+#define FLAGS_FORCE_TESTPATTERN		(1 << 4)
+#define FLAGS_SEPARATE_FRAMES		(1 << 5)
+#define FLAGS_CLEAN_FRAMES		(1 << 6)
+#define	FLAGS_NO_DECODING		(1 << 7)
+
+/* Bit flags for frames (apply to the frame where they are specified) */
+#define USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST	(1 << 0)
+
+/* Camera capabilities (maximum) */
+#define CAMERA_URB_FRAMES       32
+#define CAMERA_MAX_ISO_PACKET   1023 /* 1022 actually sent by camera */
+#define FRAMES_PER_DESC		(CAMERA_URB_FRAMES)
+#define FRAME_SIZE_PER_DESC	(CAMERA_MAX_ISO_PACKET)
+
+/* This macro restricts an int variable to an inclusive range */
+#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
+
+#define V4L_BYTES_PER_PIXEL     3	/* Because we produce RGB24 */
+
+/*
+ * Use this macro to construct constants for different video sizes.
+ * We have to deal with different video sizes that have to be
+ * configured in the device or compared against when we receive
+ * a data. Normally one would define a bunch of VIDEOSIZE_x_by_y
+ * #defines and that's the end of story. However this solution
+ * does not allow to convert between real pixel sizes and the
+ * constant (integer) value that may be used to tag a frame or
+ * whatever. The set of macros below constructs videosize constants
+ * from the pixel size and allows to reconstruct the pixel size
+ * from the combined value later.
+ */
+#define	VIDEOSIZE(x,y)	(((x) & 0xFFFFL) | (((y) & 0xFFFFL) << 16))
+#define	VIDEOSIZE_X(vs)	((vs) & 0xFFFFL)
+#define	VIDEOSIZE_Y(vs)	(((vs) >> 16) & 0xFFFFL)
+typedef unsigned long videosize_t;
+
+/*
+ * This macro checks if the camera is still operational. The 'uvd'
+ * pointer must be valid, uvd->dev must be valid, we are not
+ * removing the device and the device has not erred on us.
+ */
+#define CAMERA_IS_OPERATIONAL(uvd) (\
+	(uvd != NULL) && \
+	((uvd)->dev != NULL) && \
+	((uvd)->last_error == 0) && \
+	(!(uvd)->remove_pending))
+
+/*
+ * We use macros to do YUV -> RGB conversion because this is
+ * very important for speed and totally unimportant for size.
+ *
+ * YUV -> RGB Conversion
+ * ---------------------
+ *
+ * B = 1.164*(Y-16)		    + 2.018*(V-128)
+ * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
+ * R = 1.164*(Y-16) + 1.596*(U-128)
+ *
+ * If you fancy integer arithmetics (as you should), hear this:
+ *
+ * 65536*B = 76284*(Y-16)		  + 132252*(V-128)
+ * 65536*G = 76284*(Y-16) -  53281*(U-128) -  25625*(V-128)
+ * 65536*R = 76284*(Y-16) + 104595*(U-128)
+ *
+ * Make sure the output values are within [0..255] range.
+ */
+#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
+#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
+    int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
+    mm_y = (my) - 16;  \
+    mm_u = (mu) - 128; \
+    mm_v = (mv) - 128; \
+    mm_yc= mm_y * 76284; \
+    mm_b = (mm_yc		+ 132252*mm_v	) >> 16; \
+    mm_g = (mm_yc -  53281*mm_u -  25625*mm_v	) >> 16; \
+    mm_r = (mm_yc + 104595*mm_u			) >> 16; \
+    mb = LIMIT_RGB(mm_b); \
+    mg = LIMIT_RGB(mm_g); \
+    mr = LIMIT_RGB(mm_r); \
+}
+
+#define	RING_QUEUE_SIZE		(128*1024)	/* Must be a power of 2 */
+#define	RING_QUEUE_ADVANCE_INDEX(rq,ind,n) (rq)->ind = ((rq)->ind + (n)) & ((rq)->length-1)
+#define	RING_QUEUE_DEQUEUE_BYTES(rq,n) RING_QUEUE_ADVANCE_INDEX(rq,ri,n)
+#define	RING_QUEUE_PEEK(rq,ofs) ((rq)->queue[((ofs) + (rq)->ri) & ((rq)->length-1)])
+
+struct RingQueue {
+	unsigned char *queue;	/* Data from the Isoc data pump */
+	int length;		/* How many bytes allocated for the queue */
+	int wi;			/* That's where we write */
+	int ri;			/* Read from here until you hit write index */
+	wait_queue_head_t wqh;	/* Processes waiting */
+};
+
+enum ScanState {
+	ScanState_Scanning,	/* Scanning for header */
+	ScanState_Lines		/* Parsing lines */
+};
+
+/* Completion states of the data parser */
+enum ParseState {
+	scan_Continue,		/* Just parse next item */
+	scan_NextFrame,		/* Frame done, send it to V4L */
+	scan_Out,		/* Not enough data for frame */
+	scan_EndParse		/* End parsing */
+};
+
+enum FrameState {
+	FrameState_Unused,	/* Unused (no MCAPTURE) */
+	FrameState_Ready,	/* Ready to start grabbing */
+	FrameState_Grabbing,	/* In the process of being grabbed into */
+	FrameState_Done,	/* Finished grabbing, but not been synced yet */
+	FrameState_Done_Hold,	/* Are syncing or reading */
+	FrameState_Error,	/* Something bad happened while processing */
+};
+
+/*
+ * Some frames may contain only even or odd lines. This type
+ * specifies what type of deinterlacing is required.
+ */
+enum Deinterlace {
+	Deinterlace_None=0,
+	Deinterlace_FillOddLines,
+	Deinterlace_FillEvenLines
+};
+
+#define USBVIDEO_NUMFRAMES	2	/* How many frames we work with */
+#define USBVIDEO_NUMSBUF	2	/* How many URBs linked in a ring */
+
+/* This structure represents one Isoc request - URB and buffer */
+struct usbvideo_sbuf {
+	char *data;
+	struct urb *urb;
+};
+
+struct usbvideo_frame {
+	char *data;		/* Frame buffer */
+	unsigned long header;	/* Significant bits from the header */
+
+	videosize_t canvas;	/* The canvas (max. image) allocated */
+	videosize_t request;	/* That's what the application asked for */
+	unsigned short palette;	/* The desired format */
+
+	enum FrameState frameState;/* State of grabbing */
+	enum ScanState scanstate;	/* State of scanning */
+	enum Deinterlace deinterlace;
+	int flags;		/* USBVIDEO_FRAME_FLAG_xxx bit flags */
+
+	int curline;		/* Line of frame we're working on */
+
+	long seqRead_Length;	/* Raw data length of frame */
+	long seqRead_Index;	/* Amount of data that has been already read */
+
+	void *user;		/* Additional data that user may need */
+};
+
+/* Statistics that can be overlaid on screen */
+struct usbvideo_statistics {
+	unsigned long frame_num;	/* Sequential number of the frame */
+	unsigned long urb_count;        /* How many URBs we received so far */
+	unsigned long urb_length;       /* Length of last URB */
+	unsigned long data_count;       /* How many bytes we received */
+	unsigned long header_count;     /* How many frame headers we found */
+	unsigned long iso_skip_count;	/* How many empty ISO packets received */
+	unsigned long iso_err_count;	/* How many bad ISO packets received */
+};
+
+struct usbvideo;
+
+struct uvd {
+	struct video_device vdev;	/* Must be the first field! */
+	struct usb_device *dev;
+	struct usbvideo *handle;	/* Points back to the struct usbvideo */
+	void *user_data;		/* Camera-dependent data */
+	int user_size;			/* Size of that camera-dependent data */
+	int debug;			/* Debug level for usbvideo */
+	unsigned char iface;		/* Video interface number */
+	unsigned char video_endp;
+	unsigned char ifaceAltActive;
+	unsigned char ifaceAltInactive; /* Alt settings */
+	unsigned long flags;		/* FLAGS_USBVIDEO_xxx */
+	unsigned long paletteBits;	/* Which palettes we accept? */
+	unsigned short defaultPalette;	/* What palette to use for read() */
+	struct mutex lock;
+	int user;		/* user count for exclusive use */
+
+	videosize_t videosize;	/* Current setting */
+	videosize_t canvas;	/* This is the width,height of the V4L canvas */
+	int max_frame_size;	/* Bytes in one video frame */
+
+	int uvd_used;        	/* Is this structure in use? */
+	int streaming;		/* Are we streaming Isochronous? */
+	int grabbing;		/* Are we grabbing? */
+	int settingsAdjusted;	/* Have we adjusted contrast etc.? */
+	int last_error;		/* What calamity struck us? */
+
+	char *fbuf;		/* Videodev buffer area */
+	int fbuf_size;		/* Videodev buffer size */
+
+	int curframe;
+	int iso_packet_len;	/* Videomode-dependent, saves bus bandwidth */
+
+	struct RingQueue dp;	/* Isoc data pump */
+	struct usbvideo_frame frame[USBVIDEO_NUMFRAMES];
+	struct usbvideo_sbuf sbuf[USBVIDEO_NUMSBUF];
+
+	volatile int remove_pending;	/* If set then about to exit */
+
+	struct video_picture vpic, vpic_old;	/* Picture settings */
+	struct video_capability vcap;		/* Video capabilities */
+	struct video_channel vchan;	/* May be used for tuner support */
+	struct usbvideo_statistics stats;
+	char videoName[32];		/* Holds name like "video7" */
+};
+
+/*
+ * usbvideo callbacks (virtual methods). They are set when usbvideo
+ * services are registered. All of these default to NULL, except those
+ * that default to usbvideo-provided methods.
+ */
+struct usbvideo_cb {
+	int (*probe)(struct usb_interface *, const struct usb_device_id *);
+	void (*userFree)(struct uvd *);
+	void (*disconnect)(struct usb_interface *);
+	int (*setupOnOpen)(struct uvd *);
+	void (*videoStart)(struct uvd *);
+	void (*videoStop)(struct uvd *);
+	void (*processData)(struct uvd *, struct usbvideo_frame *);
+	void (*postProcess)(struct uvd *, struct usbvideo_frame *);
+	void (*adjustPicture)(struct uvd *);
+	int (*getFPS)(struct uvd *);
+	int (*overlayHook)(struct uvd *, struct usbvideo_frame *);
+	int (*getFrame)(struct uvd *, int);
+	int (*startDataPump)(struct uvd *uvd);
+	void (*stopDataPump)(struct uvd *uvd);
+	int (*setVideoMode)(struct uvd *uvd, struct video_window *vw);
+};
+
+struct usbvideo {
+	int num_cameras;		/* As allocated */
+	struct usb_driver usbdrv;	/* Interface to the USB stack */
+	char drvName[80];		/* Driver name */
+	struct mutex lock;		/* Mutex protecting camera structures */
+	struct usbvideo_cb cb;		/* Table of callbacks (virtual methods) */
+	struct video_device vdt;	/* Video device template */
+	struct uvd *cam;			/* Array of camera structures */
+	struct module *md_module;	/* Minidriver module */
+};
+
+
+/*
+ * This macro retrieves callback address from the struct uvd object.
+ * No validity checks are done here, so be sure to check the
+ * callback beforehand with VALID_CALLBACK.
+ */
+#define	GET_CALLBACK(uvd,cbName) ((uvd)->handle->cb.cbName)
+
+/*
+ * This macro returns either callback pointer or NULL. This is safe
+ * macro, meaning that most of components of data structures involved
+ * may be NULL - this only results in NULL being returned. You may
+ * wish to use this macro to make sure that the callback is callable.
+ * However keep in mind that those checks take time.
+ */
+#define	VALID_CALLBACK(uvd,cbName) ((((uvd) != NULL) && \
+		((uvd)->handle != NULL)) ? GET_CALLBACK(uvd,cbName) : NULL)
+
+int  RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len);
+int  RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n);
+void RingQueue_WakeUpInterruptible(struct RingQueue *rq);
+void RingQueue_Flush(struct RingQueue *rq);
+
+static inline int RingQueue_GetLength(const struct RingQueue *rq)
+{
+	return (rq->wi - rq->ri + rq->length) & (rq->length-1);
+}
+
+static inline int RingQueue_GetFreeSpace(const struct RingQueue *rq)
+{
+	return rq->length - RingQueue_GetLength(rq);
+}
+
+void usbvideo_DrawLine(
+	struct usbvideo_frame *frame,
+	int x1, int y1,
+	int x2, int y2,
+	unsigned char cr, unsigned char cg, unsigned char cb);
+void usbvideo_HexDump(const unsigned char *data, int len);
+void usbvideo_SayAndWait(const char *what);
+void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode);
+
+/* Memory allocation routines */
+unsigned long usbvideo_kvirt_to_pa(unsigned long adr);
+
+int usbvideo_register(
+	struct usbvideo **pCams,
+	const int num_cams,
+	const int num_extra,
+	const char *driverName,
+	const struct usbvideo_cb *cbTable,
+	struct module *md,
+	const struct usb_device_id *id_table);
+struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams);
+int usbvideo_RegisterVideoDevice(struct uvd *uvd);
+void usbvideo_Deregister(struct usbvideo **uvt);
+
+int usbvideo_v4l_initialize(struct video_device *dev);
+
+void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame);
+
+/*
+ * This code performs bounds checking - use it when working with
+ * new formats, or else you may get oopses all over the place.
+ * If pixel falls out of bounds then it gets shoved back (as close
+ * to place of offence as possible) and is painted bright red.
+ *
+ * There are two important concepts: frame width, height and
+ * V4L canvas width, height. The former is the area requested by
+ * the application -for this very frame-. The latter is the largest
+ * possible frame that we can serve (we advertise that via V4L ioctl).
+ * The frame data is expected to be formatted as lines of length
+ * VIDEOSIZE_X(fr->request), total VIDEOSIZE_Y(frame->request) lines.
+ */
+static inline void RGB24_PUTPIXEL(
+	struct usbvideo_frame *fr,
+	int ix, int iy,
+	unsigned char vr,
+	unsigned char vg,
+	unsigned char vb)
+{
+	register unsigned char *pf;
+	int limiter = 0, mx, my;
+	mx = ix;
+	my = iy;
+	if (mx < 0) {
+		mx=0;
+		limiter++;
+	} else if (mx >= VIDEOSIZE_X((fr)->request)) {
+		mx= VIDEOSIZE_X((fr)->request) - 1;
+		limiter++;
+	}
+	if (my < 0) {
+		my = 0;
+		limiter++;
+	} else if (my >= VIDEOSIZE_Y((fr)->request)) {
+		my = VIDEOSIZE_Y((fr)->request) - 1;
+		limiter++;
+	}
+	pf = (fr)->data + V4L_BYTES_PER_PIXEL*((iy)*VIDEOSIZE_X((fr)->request) + (ix));
+	if (limiter) {
+		*pf++ = 0;
+		*pf++ = 0;
+		*pf++ = 0xFF;
+	} else {
+		*pf++ = (vb);
+		*pf++ = (vg);
+		*pf++ = (vr);
+	}
+}
+
+#endif /* usbvideo_h */
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
new file mode 100644
index 000000000000..90d48e8510ba
--- /dev/null
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -0,0 +1,1411 @@
+/*
+ * USB ViCam WebCam driver
+ * Copyright (c) 2002 Joe Burks (jburks@wavicle.org),
+ *                    Christopher L Cheney (ccheney@cheney.cx),
+ *                    Pavel Machek (pavel@suse.cz),
+ *                    John Tyner (jtyner@cs.ucr.edu),
+ *                    Monroe Williams (monroe@pobox.com)
+ *
+ * Supports 3COM HomeConnect PC Digital WebCam
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * This source code is based heavily on the CPiA webcam driver which was
+ * written by Peter Pregler, Scott J. Bertin and Johannes Erdfelt
+ *
+ * Portions of this code were also copied from usbvideo.c
+ *
+ * Special thanks to the the whole team at Sourceforge for help making
+ * this driver become a reality.  Notably:
+ * Andy Armstrong who reverse engineered the color encoding and
+ * Pavel Machek and Chris Cheney who worked on reverse engineering the
+ *    camera controls and wrote the first generation driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/videodev.h>
+#include <linux/usb.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/mutex.h>
+#include "usbvideo.h"
+
+// #define VICAM_DEBUG
+
+#ifdef VICAM_DEBUG
+#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, __FUNCTION__, lineno, ##args)
+#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):%s (%d):"fmt,##args)
+#else
+#define DBG(fmn,args...) do {} while(0)
+#endif
+
+#define DRIVER_AUTHOR           "Joe Burks, jburks@wavicle.org"
+#define DRIVER_DESC             "ViCam WebCam Driver"
+
+/* Define these values to match your device */
+#define USB_VICAM_VENDOR_ID	0x04c1
+#define USB_VICAM_PRODUCT_ID	0x009d
+
+#define VICAM_BYTES_PER_PIXEL   3
+#define VICAM_MAX_READ_SIZE     (512*242+128)
+#define VICAM_MAX_FRAME_SIZE    (VICAM_BYTES_PER_PIXEL*320*240)
+#define VICAM_FRAMES            2
+
+#define VICAM_HEADER_SIZE       64
+
+#define clamp( x, l, h )        max_t( __typeof__( x ),         \
+				       ( l ),                   \
+				       min_t( __typeof__( x ),  \
+					      ( h ),            \
+					      ( x ) ) )
+
+/* Not sure what all the bytes in these char
+ * arrays do, but they're necessary to make
+ * the camera work.
+ */
+
+static unsigned char setup1[] = {
+	0xB6, 0xC3, 0x1F, 0x00, 0x02, 0x64, 0xE7, 0x67,
+	0xFD, 0xFF, 0x0E, 0xC0, 0xE7, 0x09, 0xDE, 0x00,
+	0x8E, 0x00, 0xC0, 0x09, 0x40, 0x03, 0xC0, 0x17,
+	0x44, 0x03, 0x4B, 0xAF, 0xC0, 0x07, 0x00, 0x00,
+	0x4B, 0xAF, 0x97, 0xCF, 0x00, 0x00
+};
+
+static unsigned char setup2[] = {
+	0xB6, 0xC3, 0x03, 0x00, 0x03, 0x64, 0x18, 0x00,
+	0x00, 0x00
+};
+
+static unsigned char setup3[] = {
+	0xB6, 0xC3, 0x01, 0x00, 0x06, 0x64, 0x00, 0x00
+};
+
+static unsigned char setup4[] = {
+	0xB6, 0xC3, 0x8F, 0x06, 0x02, 0x64, 0xE7, 0x07,
+	0x00, 0x00, 0x08, 0xC0, 0xE7, 0x07, 0x00, 0x00,
+	0x3E, 0xC0, 0xE7, 0x07, 0x54, 0x01, 0xAA, 0x00,
+	0xE7, 0x07, 0xC8, 0x05, 0xB6, 0x00, 0xE7, 0x07,
+	0x42, 0x01, 0xD2, 0x00, 0xE7, 0x07, 0x7C, 0x00,
+	0x16, 0x00, 0xE7, 0x07, 0x56, 0x00, 0x18, 0x00,
+	0xE7, 0x07, 0x06, 0x00, 0x92, 0xC0, 0xE7, 0x07,
+	0x00, 0x00, 0x1E, 0xC0, 0xE7, 0x07, 0xFF, 0xFF,
+	0x22, 0xC0, 0xE7, 0x07, 0x04, 0x00, 0x24, 0xC0,
+	0xE7, 0x07, 0xEC, 0x27, 0x28, 0xC0, 0xE7, 0x07,
+	0x16, 0x01, 0x8E, 0x00, 0xE7, 0x87, 0x01, 0x00,
+	0x0E, 0xC0, 0x97, 0xCF, 0xD7, 0x09, 0x00, 0xC0,
+	0xE7, 0x77, 0x01, 0x00, 0x92, 0xC0, 0x09, 0xC1,
+	0xE7, 0x09, 0xFE, 0x05, 0x24, 0x01, 0xE7, 0x09,
+	0x04, 0x06, 0x26, 0x01, 0xE7, 0x07, 0x07, 0x00,
+	0x92, 0xC0, 0xE7, 0x05, 0x00, 0xC0, 0xC0, 0xDF,
+	0x97, 0xCF, 0x17, 0x00, 0x57, 0x00, 0x17, 0x02,
+	0xD7, 0x09, 0x00, 0xC0, 0xE7, 0x77, 0x01, 0x00,
+	0x92, 0xC0, 0x0A, 0xC1, 0xE7, 0x57, 0xFF, 0xFF,
+	0xFA, 0x05, 0x0D, 0xC0, 0xE7, 0x57, 0x00, 0x00,
+	0xFA, 0x05, 0x0F, 0xC0, 0x9F, 0xAF, 0xC6, 0x00,
+	0xE7, 0x05, 0x00, 0xC0, 0xC8, 0x05, 0xC1, 0x05,
+	0xC0, 0x05, 0xC0, 0xDF, 0x97, 0xCF, 0x27, 0xDA,
+	0xFA, 0x05, 0xEF, 0x07, 0x01, 0x00, 0x0B, 0x06,
+	0x73, 0xCF, 0x9F, 0xAF, 0x78, 0x01, 0x9F, 0xAF,
+	0x1A, 0x03, 0x6E, 0xCF, 0xE7, 0x09, 0xFC, 0x05,
+	0x24, 0x01, 0xE7, 0x09, 0x02, 0x06, 0x26, 0x01,
+	0xE7, 0x07, 0x07, 0x00, 0x92, 0xC0, 0xE7, 0x09,
+	0xFC, 0x05, 0xFE, 0x05, 0xE7, 0x09, 0x02, 0x06,
+	0x04, 0x06, 0xE7, 0x09, 0x00, 0x06, 0xFC, 0x05,
+	0xE7, 0x09, 0xFE, 0x05, 0x00, 0x06, 0x27, 0xDA,
+	0xFA, 0x05, 0xE7, 0x57, 0x01, 0x00, 0xFA, 0x05,
+	0x02, 0xCA, 0x04, 0xC0, 0x97, 0xCF, 0x9F, 0xAF,
+	0x66, 0x05, 0x97, 0xCF, 0xE7, 0x07, 0x40, 0x00,
+	0x02, 0x06, 0xC8, 0x09, 0xFC, 0x05, 0x9F, 0xAF,
+	0xDA, 0x02, 0x97, 0xCF, 0xCF, 0x17, 0x02, 0x00,
+	0xEF, 0x57, 0x81, 0x00, 0x09, 0x06, 0x9F, 0xA0,
+	0xB6, 0x01, 0xEF, 0x57, 0x80, 0x00, 0x09, 0x06,
+	0x9F, 0xA0, 0x40, 0x02, 0xEF, 0x57, 0x01, 0x00,
+	0x0B, 0x06, 0x9F, 0xA0, 0x46, 0x03, 0xE7, 0x07,
+	0x01, 0x00, 0x0A, 0xC0, 0x46, 0xAF, 0x47, 0xAF,
+	0x9F, 0xAF, 0x40, 0x02, 0xE7, 0x07, 0x2E, 0x00,
+	0x0A, 0xC0, 0xEF, 0x87, 0x80, 0x00, 0x09, 0x06,
+	0x97, 0xCF, 0x00, 0x0E, 0x01, 0x00, 0xC0, 0x57,
+	0x51, 0x00, 0x9F, 0xC0, 0x9E, 0x02, 0xC0, 0x57,
+	0x50, 0x00, 0x20, 0xC0, 0xC0, 0x57, 0x55, 0x00,
+	0x12, 0xC0, 0xC0, 0x57, 0x56, 0x00, 0x9F, 0xC0,
+	0x72, 0x02, 0x9F, 0xCF, 0xD6, 0x02, 0xC1, 0x0B,
+	0x08, 0x06, 0x01, 0xD0, 0x6F, 0x90, 0x08, 0x06,
+	0xC0, 0x07, 0x08, 0x00, 0xC1, 0x0B, 0x08, 0x06,
+	0x9F, 0xAF, 0x28, 0x05, 0x97, 0xCF, 0x2F, 0x0E,
+	0x02, 0x00, 0x08, 0x06, 0xC0, 0x07, 0x08, 0x00,
+	0xC1, 0x0B, 0x08, 0x06, 0x9F, 0xAF, 0x28, 0x05,
+	0x9F, 0xCF, 0xD6, 0x02, 0x2F, 0x0E, 0x02, 0x00,
+	0x09, 0x06, 0xEF, 0x87, 0x80, 0x00, 0x09, 0x06,
+	0x9F, 0xCF, 0xD6, 0x02, 0xEF, 0x67, 0x7F, 0xFF,
+	0x09, 0x06, 0xE7, 0x67, 0xFF, 0xFD, 0x22, 0xC0,
+	0xE7, 0x67, 0xEF, 0xFF, 0x24, 0xC0, 0xE7, 0x87,
+	0x10, 0x00, 0x28, 0xC0, 0x9F, 0xAF, 0xB8, 0x05,
+	0xE7, 0x87, 0xE0, 0x21, 0x24, 0xC0, 0x9F, 0xAF,
+	0xA8, 0x05, 0xE7, 0x87, 0x08, 0x00, 0x24, 0xC0,
+	0xE7, 0x67, 0xDF, 0xFF, 0x24, 0xC0, 0xC8, 0x07,
+	0x0A, 0x00, 0xC0, 0x07, 0x00, 0x00, 0xC1, 0x07,
+	0x01, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0x9F, 0xAF,
+	0xB8, 0x05, 0xC0, 0x07, 0x9E, 0x00, 0x9F, 0xAF,
+	0x44, 0x05, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0,
+	0xC0, 0x09, 0x20, 0xC0, 0xE7, 0x87, 0x00, 0x01,
+	0x24, 0xC0, 0xC0, 0x77, 0x00, 0x02, 0x0F, 0xC1,
+	0xE7, 0x67, 0xF7, 0xFF, 0x24, 0xC0, 0xE7, 0x67,
+	0xF7, 0xFF, 0x24, 0xC0, 0xE7, 0x87, 0x08, 0x00,
+	0x24, 0xC0, 0x08, 0xDA, 0x5E, 0xC1, 0xEF, 0x07,
+	0x80, 0x00, 0x09, 0x06, 0x97, 0xCF, 0xEF, 0x07,
+	0x01, 0x00, 0x0A, 0x06, 0x97, 0xCF, 0xEF, 0x07,
+	0x00, 0x00, 0x0B, 0x06, 0xEF, 0x07, 0x00, 0x00,
+	0x0A, 0x06, 0xEF, 0x67, 0x7F, 0xFF, 0x09, 0x06,
+	0xEF, 0x07, 0x00, 0x00, 0x0D, 0x06, 0xE7, 0x67,
+	0xEF, 0xFF, 0x28, 0xC0, 0xE7, 0x67, 0x17, 0xD8,
+	0x24, 0xC0, 0xE7, 0x07, 0x00, 0x00, 0x1E, 0xC0,
+	0xE7, 0x07, 0xFF, 0xFF, 0x22, 0xC0, 0x97, 0xCF,
+	0xC8, 0x07, 0x0E, 0x06, 0x9F, 0xAF, 0xDA, 0x02,
+	0xE7, 0x07, 0x00, 0x00, 0xF2, 0x05, 0xE7, 0x07,
+	0x10, 0x00, 0xF6, 0x05, 0xE7, 0x07, 0x0E, 0x06,
+	0xF4, 0x05, 0xE7, 0x07, 0xD6, 0x02, 0xF8, 0x05,
+	0xC8, 0x07, 0xF2, 0x05, 0xC1, 0x07, 0x00, 0x80,
+	0x50, 0xAF, 0x97, 0xCF, 0x2F, 0x0C, 0x02, 0x00,
+	0x07, 0x06, 0x2F, 0x0C, 0x04, 0x00, 0x06, 0x06,
+	0xE7, 0x07, 0x00, 0x00, 0xF2, 0x05, 0xE7, 0x07,
+	0x10, 0x00, 0xF6, 0x05, 0xE7, 0x07, 0xE2, 0x05,
+	0xF4, 0x05, 0xE7, 0x07, 0xCE, 0x02, 0xF8, 0x05,
+	0xC8, 0x07, 0xF2, 0x05, 0xC1, 0x07, 0x00, 0x80,
+	0x51, 0xAF, 0x97, 0xCF, 0x9F, 0xAF, 0x66, 0x04,
+	0x9F, 0xAF, 0x1A, 0x03, 0x59, 0xAF, 0x97, 0xCF,
+	0xC0, 0x07, 0x0E, 0x00, 0xC1, 0x0B, 0x0C, 0x06,
+	0x41, 0xD1, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07,
+	0x3C, 0x00, 0x9F, 0xAF, 0x44, 0x05, 0x68, 0x00,
+	0xC0, 0x07, 0x3B, 0x00, 0x9F, 0xAF, 0x44, 0x05,
+	0x6F, 0x00, 0x0C, 0x06, 0x68, 0x00, 0xE0, 0x07,
+	0x04, 0x01, 0xE8, 0x0B, 0x0A, 0x06, 0xE8, 0x07,
+	0x00, 0x00, 0xE0, 0x07, 0x00, 0x02, 0xE0, 0x07,
+	0xEC, 0x01, 0xE0, 0x07, 0xFC, 0xFF, 0x97, 0xCF,
+	0xE7, 0x07, 0xFF, 0xFF, 0xFA, 0x05, 0xEF, 0x07,
+	0x00, 0x00, 0x0B, 0x06, 0xE7, 0x07, 0x0E, 0x06,
+	0x24, 0x01, 0xE7, 0x07, 0x0E, 0x06, 0xFE, 0x05,
+	0xE7, 0x07, 0x40, 0x00, 0x26, 0x01, 0xE7, 0x07,
+	0x40, 0x00, 0x04, 0x06, 0xE7, 0x07, 0x07, 0x00,
+	0x92, 0xC0, 0x97, 0xCF, 0xEF, 0x07, 0x02, 0x00,
+	0x0B, 0x06, 0x9F, 0xAF, 0x78, 0x01, 0xEF, 0x77,
+	0x80, 0x00, 0x07, 0x06, 0x9F, 0xC0, 0x14, 0x04,
+	0xEF, 0x77, 0x01, 0x00, 0x07, 0x06, 0x37, 0xC0,
+	0xEF, 0x77, 0x01, 0x00, 0x0D, 0x06, 0x0F, 0xC1,
+	0xEF, 0x07, 0x01, 0x00, 0x0D, 0x06, 0xC0, 0x07,
+	0x02, 0x00, 0xC1, 0x07, 0x30, 0x00, 0x9F, 0xAF,
+	0x28, 0x05, 0xC0, 0x07, 0x01, 0x00, 0xC1, 0x07,
+	0x02, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0xC8, 0x07,
+	0xFF, 0x4F, 0x9F, 0xAF, 0xA8, 0x05, 0xC0, 0x07,
+	0x38, 0x00, 0x9F, 0xAF, 0x44, 0x05, 0xC1, 0x77,
+	0x03, 0x00, 0x02, 0xC1, 0x08, 0xDA, 0x75, 0xC1,
+	0xC1, 0x77, 0x01, 0x00, 0x0A, 0xC1, 0xC0, 0x07,
+	0x01, 0x00, 0xC1, 0x07, 0x02, 0x00, 0x9F, 0xAF,
+	0x28, 0x05, 0xEF, 0x07, 0x01, 0x00, 0x06, 0x06,
+	0x2C, 0xCF, 0xC0, 0x07, 0x01, 0x00, 0xC1, 0x07,
+	0x04, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0xEF, 0x07,
+	0x00, 0x00, 0x06, 0x06, 0x22, 0xCF, 0xEF, 0x07,
+	0x00, 0x00, 0x0D, 0x06, 0xEF, 0x57, 0x01, 0x00,
+	0x06, 0x06, 0x1B, 0xC0, 0xC0, 0x07, 0x01, 0x00,
+	0xC1, 0x07, 0x01, 0x00, 0x9F, 0xAF, 0x28, 0x05,
+	0xC0, 0x07, 0x02, 0x00, 0xC1, 0x07, 0x30, 0x00,
+	0x9F, 0xAF, 0x28, 0x05, 0xC8, 0x07, 0xFF, 0x4F,
+	0x9F, 0xAF, 0xA8, 0x05, 0xC0, 0x07, 0x38, 0x00,
+	0x9F, 0xAF, 0x44, 0x05, 0xC1, 0x67, 0x03, 0x00,
+	0xC1, 0x57, 0x03, 0x00, 0x02, 0xC0, 0x08, 0xDA,
+	0x73, 0xC1, 0xC0, 0x07, 0x02, 0x00, 0xC1, 0x07,
+	0x12, 0x00, 0xEF, 0x57, 0x00, 0x00, 0x06, 0x06,
+	0x02, 0xC0, 0xC1, 0x07, 0x23, 0x00, 0x9F, 0xAF,
+	0x28, 0x05, 0xC0, 0x07, 0x14, 0x00, 0xC1, 0x0B,
+	0xEA, 0x05, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07,
+	0x3E, 0x00, 0x9F, 0xAF, 0x0A, 0x05, 0xE7, 0x09,
+	0xE4, 0x05, 0xFA, 0x05, 0x27, 0xD8, 0xFA, 0x05,
+	0xE7, 0x07, 0x0E, 0x06, 0xFC, 0x05, 0xE7, 0x07,
+	0x4E, 0x06, 0x00, 0x06, 0xE7, 0x07, 0x40, 0x00,
+	0x02, 0x06, 0x9F, 0xAF, 0x66, 0x05, 0x9F, 0xAF,
+	0xC6, 0x00, 0x97, 0xCF, 0xC1, 0x0B, 0xE2, 0x05,
+	0x41, 0xD0, 0x01, 0xD2, 0xC1, 0x17, 0x23, 0x00,
+	0x9F, 0xAF, 0xDC, 0x04, 0xC0, 0x07, 0x04, 0x00,
+	0xC1, 0x0B, 0xE3, 0x05, 0x9F, 0xAF, 0x28, 0x05,
+	0xC0, 0x07, 0x06, 0x00, 0xC1, 0x09, 0xE6, 0x05,
+	0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x07, 0x00,
+	0xC1, 0x09, 0xE6, 0x05, 0xC1, 0xD1, 0x9F, 0xAF,
+	0x28, 0x05, 0xC0, 0x07, 0x0B, 0x00, 0xC1, 0x09,
+	0xE8, 0x05, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07,
+	0x0C, 0x00, 0xC1, 0x09, 0xE8, 0x05, 0xC1, 0xD1,
+	0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x0D, 0x00,
+	0xC1, 0x07, 0x09, 0x00, 0x9F, 0xAF, 0x28, 0x05,
+	0xC0, 0x07, 0x03, 0x00, 0xC1, 0x07, 0x32, 0x00,
+	0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x0F, 0x00,
+	0xC1, 0x07, 0x00, 0x00, 0x9F, 0xAF, 0x28, 0x05,
+	0x97, 0xCF, 0xE7, 0x67, 0xFF, 0xD9, 0x24, 0xC0,
+	0xC8, 0x07, 0x0A, 0x00, 0x40, 0x00, 0xC0, 0x67,
+	0x00, 0x02, 0x27, 0x80, 0x24, 0xC0, 0xE7, 0x87,
+	0x00, 0x04, 0x24, 0xC0, 0xE7, 0x67, 0xFF, 0xF9,
+	0x24, 0xC0, 0x01, 0xD2, 0x08, 0xDA, 0x72, 0xC1,
+	0xE7, 0x87, 0x00, 0x20, 0x24, 0xC0, 0x97, 0xCF,
+	0x27, 0x00, 0x1E, 0xC0, 0xE7, 0x87, 0xFF, 0x00,
+	0x22, 0xC0, 0xE7, 0x67, 0x7F, 0xFF, 0x24, 0xC0,
+	0xE7, 0x87, 0x80, 0x00, 0x24, 0xC0, 0xE7, 0x87,
+	0x80, 0x00, 0x24, 0xC0, 0x97, 0xCF, 0x9F, 0xAF,
+	0x0A, 0x05, 0x67, 0x00, 0x1E, 0xC0, 0xE7, 0x67,
+	0xBF, 0xFF, 0x24, 0xC0, 0xE7, 0x87, 0x40, 0x00,
+	0x24, 0xC0, 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0,
+	0x97, 0xCF, 0x9F, 0xAF, 0x0A, 0x05, 0xE7, 0x67,
+	0x00, 0xFF, 0x22, 0xC0, 0xE7, 0x67, 0xFF, 0xFE,
+	0x24, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0,
+	0xC1, 0x09, 0x20, 0xC0, 0xE7, 0x87, 0x00, 0x01,
+	0x24, 0xC0, 0x97, 0xCF, 0xC0, 0x07, 0x40, 0x00,
+	0xC8, 0x09, 0xFC, 0x05, 0xE7, 0x67, 0x00, 0xFF,
+	0x22, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0,
+	0xE7, 0x67, 0xBF, 0xFF, 0x24, 0xC0, 0xE7, 0x67,
+	0xBF, 0xFF, 0x24, 0xC0, 0x00, 0xDA, 0xE8, 0x09,
+	0x20, 0xC0, 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0,
+	0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, 0x00, 0xDA,
+	0xE8, 0x09, 0x20, 0xC0, 0x6D, 0xC1, 0xE7, 0x87,
+	0x00, 0x01, 0x24, 0xC0, 0x97, 0xCF, 0xE7, 0x07,
+	0x32, 0x00, 0x12, 0xC0, 0xE7, 0x77, 0x00, 0x80,
+	0x12, 0xC0, 0x7C, 0xC0, 0x97, 0xCF, 0xE7, 0x07,
+	0x20, 0x4E, 0x12, 0xC0, 0xE7, 0x77, 0x00, 0x80,
+	0x12, 0xC0, 0x7C, 0xC0, 0x97, 0xCF, 0x09, 0x02,
+	0x19, 0x00, 0x01, 0x01, 0x00, 0x80, 0x96, 0x09,
+	0x04, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
+	0x07, 0x05, 0x81, 0x02, 0x40, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static unsigned char setup5[] = {
+	0xB6, 0xC3, 0x2F, 0x01, 0x03, 0x64, 0x0E, 0x00,
+	0x14, 0x00, 0x1A, 0x00, 0x20, 0x00, 0x26, 0x00,
+	0x4A, 0x00, 0x64, 0x00, 0x6A, 0x00, 0x92, 0x00,
+	0x9A, 0x00, 0xA0, 0x00, 0xB2, 0x00, 0xB8, 0x00,
+	0xBE, 0x00, 0xC2, 0x00, 0xC8, 0x00, 0xCE, 0x00,
+	0xDC, 0x00, 0xDA, 0x00, 0xE2, 0x00, 0xE0, 0x00,
+	0xE8, 0x00, 0xE6, 0x00, 0xEE, 0x00, 0xEC, 0x00,
+	0xF2, 0x00, 0xF8, 0x00, 0x02, 0x01, 0x0A, 0x01,
+	0x0E, 0x01, 0x12, 0x01, 0x1E, 0x01, 0x22, 0x01,
+	0x28, 0x01, 0x2C, 0x01, 0x32, 0x01, 0x36, 0x01,
+	0x44, 0x01, 0x50, 0x01, 0x5E, 0x01, 0x72, 0x01,
+	0x76, 0x01, 0x7A, 0x01, 0x80, 0x01, 0x88, 0x01,
+	0x8C, 0x01, 0x94, 0x01, 0x9C, 0x01, 0xA0, 0x01,
+	0xA4, 0x01, 0xAA, 0x01, 0xB0, 0x01, 0xB4, 0x01,
+	0xBA, 0x01, 0xD0, 0x01, 0xDA, 0x01, 0xF6, 0x01,
+	0xFA, 0x01, 0x02, 0x02, 0x34, 0x02, 0x3C, 0x02,
+	0x44, 0x02, 0x4A, 0x02, 0x50, 0x02, 0x56, 0x02,
+	0x74, 0x02, 0x78, 0x02, 0x7E, 0x02, 0x84, 0x02,
+	0x8A, 0x02, 0x88, 0x02, 0x90, 0x02, 0x8E, 0x02,
+	0x94, 0x02, 0xA2, 0x02, 0xA8, 0x02, 0xAE, 0x02,
+	0xB4, 0x02, 0xBA, 0x02, 0xB8, 0x02, 0xC0, 0x02,
+	0xBE, 0x02, 0xC4, 0x02, 0xD0, 0x02, 0xD4, 0x02,
+	0xE0, 0x02, 0xE6, 0x02, 0xEE, 0x02, 0xF8, 0x02,
+	0xFC, 0x02, 0x06, 0x03, 0x1E, 0x03, 0x24, 0x03,
+	0x28, 0x03, 0x30, 0x03, 0x2E, 0x03, 0x3C, 0x03,
+	0x4A, 0x03, 0x4E, 0x03, 0x54, 0x03, 0x58, 0x03,
+	0x5E, 0x03, 0x66, 0x03, 0x6E, 0x03, 0x7A, 0x03,
+	0x86, 0x03, 0x8E, 0x03, 0x96, 0x03, 0xB2, 0x03,
+	0xB8, 0x03, 0xC6, 0x03, 0xCC, 0x03, 0xD4, 0x03,
+	0xDA, 0x03, 0xE8, 0x03, 0xF4, 0x03, 0xFC, 0x03,
+	0x04, 0x04, 0x20, 0x04, 0x2A, 0x04, 0x32, 0x04,
+	0x36, 0x04, 0x3E, 0x04, 0x44, 0x04, 0x42, 0x04,
+	0x48, 0x04, 0x4E, 0x04, 0x4C, 0x04, 0x54, 0x04,
+	0x52, 0x04, 0x5A, 0x04, 0x5E, 0x04, 0x62, 0x04,
+	0x68, 0x04, 0x74, 0x04, 0x7C, 0x04, 0x80, 0x04,
+	0x88, 0x04, 0x8C, 0x04, 0x94, 0x04, 0x9A, 0x04,
+	0xA2, 0x04, 0xA6, 0x04, 0xAE, 0x04, 0xB4, 0x04,
+	0xC0, 0x04, 0xCC, 0x04, 0xD8, 0x04, 0x2A, 0x05,
+	0x46, 0x05, 0x6C, 0x05, 0x00, 0x00
+};
+
+/* rvmalloc / rvfree copied from usbvideo.c
+ *
+ * Not sure why these are not yet non-statics which I can reference through
+ * usbvideo.h the same as it is in 2.4.20.  I bet this will get fixed sometime
+ * in the future.
+ *
+*/
+static void *rvmalloc(unsigned long size)
+{
+	void *mem;
+	unsigned long adr;
+
+	size = PAGE_ALIGN(size);
+	mem = vmalloc_32(size);
+	if (!mem)
+		return NULL;
+
+	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+	adr = (unsigned long) mem;
+	while (size > 0) {
+		SetPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	return mem;
+}
+
+static void rvfree(void *mem, unsigned long size)
+{
+	unsigned long adr;
+
+	if (!mem)
+		return;
+
+	adr = (unsigned long) mem;
+	while ((long) size > 0) {
+		ClearPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	vfree(mem);
+}
+
+struct vicam_camera {
+	u16 shutter_speed;	// capture shutter speed
+	u16 gain;		// capture gain
+
+	u8 *raw_image;		// raw data captured from the camera
+	u8 *framebuf;		// processed data in RGB24 format
+	u8 *cntrlbuf;		// area used to send control msgs
+
+	struct video_device vdev;	// v4l video device
+	struct usb_device *udev;	// usb device
+
+	/* guard against simultaneous accesses to the camera */
+	struct mutex cam_lock;
+
+	int is_initialized;
+	u8 open_count;
+	u8 bulkEndpoint;
+	int needsDummyRead;
+
+#if defined(CONFIG_VIDEO_PROC_FS)
+	struct proc_dir_entry *proc_dir;
+#endif
+
+};
+
+static int vicam_probe( struct usb_interface *intf, const struct usb_device_id *id);
+static void vicam_disconnect(struct usb_interface *intf);
+static void read_frame(struct vicam_camera *cam, int framenum);
+static void vicam_decode_color(const u8 *, u8 *);
+
+static int __send_control_msg(struct vicam_camera *cam,
+			      u8 request,
+			      u16 value,
+			      u16 index,
+			      unsigned char *cp,
+			      u16 size)
+{
+	int status;
+
+	/* cp must be memory that has been allocated by kmalloc */
+
+	status = usb_control_msg(cam->udev,
+				 usb_sndctrlpipe(cam->udev, 0),
+				 request,
+				 USB_DIR_OUT | USB_TYPE_VENDOR |
+				 USB_RECIP_DEVICE, value, index,
+				 cp, size, 1000);
+
+	status = min(status, 0);
+
+	if (status < 0) {
+		printk(KERN_INFO "Failed sending control message, error %d.\n",
+		       status);
+	}
+
+	return status;
+}
+
+static int send_control_msg(struct vicam_camera *cam,
+			    u8 request,
+			    u16 value,
+			    u16 index,
+			    unsigned char *cp,
+			    u16 size)
+{
+	int status = -ENODEV;
+	mutex_lock(&cam->cam_lock);
+	if (cam->udev) {
+		status = __send_control_msg(cam, request, value,
+					    index, cp, size);
+	}
+	mutex_unlock(&cam->cam_lock);
+	return status;
+}
+static int
+initialize_camera(struct vicam_camera *cam)
+{
+	const struct {
+		u8 *data;
+		u32 size;
+	} firmware[] = {
+		{ .data = setup1, .size = sizeof(setup1) },
+		{ .data = setup2, .size = sizeof(setup2) },
+		{ .data = setup3, .size = sizeof(setup3) },
+		{ .data = setup4, .size = sizeof(setup4) },
+		{ .data = setup5, .size = sizeof(setup5) },
+		{ .data = setup3, .size = sizeof(setup3) },
+		{ .data = NULL, .size = 0 }
+	};
+
+	int err, i;
+
+	for (i = 0, err = 0; firmware[i].data && !err; i++) {
+		memcpy(cam->cntrlbuf, firmware[i].data, firmware[i].size);
+
+		err = send_control_msg(cam, 0xff, 0, 0,
+				       cam->cntrlbuf, firmware[i].size);
+	}
+
+	return err;
+}
+
+static int
+set_camera_power(struct vicam_camera *cam, int state)
+{
+	int status;
+
+	if ((status = send_control_msg(cam, 0x50, state, 0, NULL, 0)) < 0)
+		return status;
+
+	if (state) {
+		send_control_msg(cam, 0x55, 1, 0, NULL, 0);
+	}
+
+	return 0;
+}
+
+static int
+vicam_ioctl(struct inode *inode, struct file *file, unsigned int ioctlnr, unsigned long arg)
+{
+	void __user *user_arg = (void __user *)arg;
+	struct vicam_camera *cam = file->private_data;
+	int retval = 0;
+
+	if (!cam)
+		return -ENODEV;
+
+	switch (ioctlnr) {
+		/* query capabilities */
+	case VIDIOCGCAP:
+		{
+			struct video_capability b;
+
+			DBG("VIDIOCGCAP\n");
+			memset(&b, 0, sizeof(b));
+			strcpy(b.name, "ViCam-based Camera");
+			b.type = VID_TYPE_CAPTURE;
+			b.channels = 1;
+			b.audios = 0;
+			b.maxwidth = 320;	/* VIDEOSIZE_CIF */
+			b.maxheight = 240;
+			b.minwidth = 320;	/* VIDEOSIZE_48_48 */
+			b.minheight = 240;
+
+			if (copy_to_user(user_arg, &b, sizeof(b)))
+				retval = -EFAULT;
+
+			break;
+		}
+		/* get/set video source - we are a camera and nothing else */
+	case VIDIOCGCHAN:
+		{
+			struct video_channel v;
+
+			DBG("VIDIOCGCHAN\n");
+			if (copy_from_user(&v, user_arg, sizeof(v))) {
+				retval = -EFAULT;
+				break;
+			}
+			if (v.channel != 0) {
+				retval = -EINVAL;
+				break;
+			}
+
+			v.channel = 0;
+			strcpy(v.name, "Camera");
+			v.tuners = 0;
+			v.flags = 0;
+			v.type = VIDEO_TYPE_CAMERA;
+			v.norm = 0;
+
+			if (copy_to_user(user_arg, &v, sizeof(v)))
+				retval = -EFAULT;
+			break;
+		}
+
+	case VIDIOCSCHAN:
+		{
+			int v;
+
+			if (copy_from_user(&v, user_arg, sizeof(v)))
+				retval = -EFAULT;
+			DBG("VIDIOCSCHAN %d\n", v);
+
+			if (retval == 0 && v != 0)
+				retval = -EINVAL;
+
+			break;
+		}
+
+		/* image properties */
+	case VIDIOCGPICT:
+		{
+			struct video_picture vp;
+			DBG("VIDIOCGPICT\n");
+			memset(&vp, 0, sizeof (struct video_picture));
+			vp.brightness = cam->gain << 8;
+			vp.depth = 24;
+			vp.palette = VIDEO_PALETTE_RGB24;
+			if (copy_to_user(user_arg, &vp, sizeof (struct video_picture)))
+				retval = -EFAULT;
+			break;
+		}
+
+	case VIDIOCSPICT:
+		{
+			struct video_picture vp;
+
+			if (copy_from_user(&vp, user_arg, sizeof(vp))) {
+				retval = -EFAULT;
+				break;
+			}
+
+			DBG("VIDIOCSPICT depth = %d, pal = %d\n", vp.depth,
+			    vp.palette);
+
+			cam->gain = vp.brightness >> 8;
+
+			if (vp.depth != 24
+			    || vp.palette != VIDEO_PALETTE_RGB24)
+				retval = -EINVAL;
+
+			break;
+		}
+
+		/* get/set capture window */
+	case VIDIOCGWIN:
+		{
+			struct video_window vw;
+			vw.x = 0;
+			vw.y = 0;
+			vw.width = 320;
+			vw.height = 240;
+			vw.chromakey = 0;
+			vw.flags = 0;
+			vw.clips = NULL;
+			vw.clipcount = 0;
+
+			DBG("VIDIOCGWIN\n");
+
+			if (copy_to_user(user_arg, (void *)&vw, sizeof(vw)))
+				retval = -EFAULT;
+
+			// I'm not sure what the deal with a capture window is, it is very poorly described
+			// in the doc.  So I won't support it now.
+			break;
+		}
+
+	case VIDIOCSWIN:
+		{
+
+			struct video_window vw;
+
+			if (copy_from_user(&vw, user_arg, sizeof(vw))) {
+				retval = -EFAULT;
+				break;
+			}
+
+			DBG("VIDIOCSWIN %d x %d\n", vw.width, vw.height);
+
+			if ( vw.width != 320 || vw.height != 240 )
+				retval = -EFAULT;
+
+			break;
+		}
+
+		/* mmap interface */
+	case VIDIOCGMBUF:
+		{
+			struct video_mbuf vm;
+			int i;
+
+			DBG("VIDIOCGMBUF\n");
+			memset(&vm, 0, sizeof (vm));
+			vm.size =
+			    VICAM_MAX_FRAME_SIZE * VICAM_FRAMES;
+			vm.frames = VICAM_FRAMES;
+			for (i = 0; i < VICAM_FRAMES; i++)
+				vm.offsets[i] = VICAM_MAX_FRAME_SIZE * i;
+
+			if (copy_to_user(user_arg, (void *)&vm, sizeof(vm)))
+				retval = -EFAULT;
+
+			break;
+		}
+
+	case VIDIOCMCAPTURE:
+		{
+			struct video_mmap vm;
+			// int video_size;
+
+			if (copy_from_user((void *)&vm, user_arg, sizeof(vm))) {
+				retval = -EFAULT;
+				break;
+			}
+
+			DBG("VIDIOCMCAPTURE frame=%d, height=%d, width=%d, format=%d.\n",vm.frame,vm.width,vm.height,vm.format);
+
+			if ( vm.frame >= VICAM_FRAMES || vm.format != VIDEO_PALETTE_RGB24 )
+				retval = -EINVAL;
+
+			// in theory right here we'd start the image capturing
+			// (fill in a bulk urb and submit it asynchronously)
+			//
+			// Instead we're going to do a total hack job for now and
+			// retrieve the frame in VIDIOCSYNC
+
+			break;
+		}
+
+	case VIDIOCSYNC:
+		{
+			int frame;
+
+			if (copy_from_user((void *)&frame, user_arg, sizeof(int))) {
+				retval = -EFAULT;
+				break;
+			}
+			DBG("VIDIOCSYNC: %d\n", frame);
+
+			read_frame(cam, frame);
+			vicam_decode_color(cam->raw_image,
+					   cam->framebuf +
+					   frame * VICAM_MAX_FRAME_SIZE );
+
+			break;
+		}
+
+		/* pointless to implement overlay with this camera */
+	case VIDIOCCAPTURE:
+	case VIDIOCGFBUF:
+	case VIDIOCSFBUF:
+	case VIDIOCKEY:
+		retval = -EINVAL;
+		break;
+
+		/* tuner interface - we have none */
+	case VIDIOCGTUNER:
+	case VIDIOCSTUNER:
+	case VIDIOCGFREQ:
+	case VIDIOCSFREQ:
+		retval = -EINVAL;
+		break;
+
+		/* audio interface - we have none */
+	case VIDIOCGAUDIO:
+	case VIDIOCSAUDIO:
+		retval = -EINVAL;
+		break;
+	default:
+		retval = -ENOIOCTLCMD;
+		break;
+	}
+
+	return retval;
+}
+
+static int
+vicam_open(struct inode *inode, struct file *file)
+{
+	struct video_device *dev = video_devdata(file);
+	struct vicam_camera *cam =
+	    (struct vicam_camera *) dev->priv;
+	DBG("open\n");
+
+	if (!cam) {
+		printk(KERN_ERR
+		       "vicam video_device improperly initialized");
+		return -EINVAL;
+	}
+
+	/* the videodev_lock held above us protects us from
+	 * simultaneous opens...for now. we probably shouldn't
+	 * rely on this fact forever.
+	 */
+
+	if (cam->open_count > 0) {
+		printk(KERN_INFO
+		       "vicam_open called on already opened camera");
+		return -EBUSY;
+	}
+
+	cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL);
+	if (!cam->raw_image) {
+		return -ENOMEM;
+	}
+
+	cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
+	if (!cam->framebuf) {
+		kfree(cam->raw_image);
+		return -ENOMEM;
+	}
+
+	cam->cntrlbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!cam->cntrlbuf) {
+		kfree(cam->raw_image);
+		rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
+		return -ENOMEM;
+	}
+
+	// First upload firmware, then turn the camera on
+
+	if (!cam->is_initialized) {
+		initialize_camera(cam);
+
+		cam->is_initialized = 1;
+	}
+
+	set_camera_power(cam, 1);
+
+	cam->needsDummyRead = 1;
+	cam->open_count++;
+
+	file->private_data = cam;
+
+	return 0;
+}
+
+static int
+vicam_close(struct inode *inode, struct file *file)
+{
+	struct vicam_camera *cam = file->private_data;
+	int open_count;
+	struct usb_device *udev;
+
+	DBG("close\n");
+
+	/* it's not the end of the world if
+	 * we fail to turn the camera off.
+	 */
+
+	set_camera_power(cam, 0);
+
+	kfree(cam->raw_image);
+	rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
+	kfree(cam->cntrlbuf);
+
+	mutex_lock(&cam->cam_lock);
+
+	cam->open_count--;
+	open_count = cam->open_count;
+	udev = cam->udev;
+
+	mutex_unlock(&cam->cam_lock);
+
+	if (!open_count && !udev) {
+		kfree(cam);
+	}
+
+	return 0;
+}
+
+static void vicam_decode_color(const u8 *data, u8 *rgb)
+{
+	/* vicam_decode_color - Convert from Vicam Y-Cr-Cb to RGB
+	 * Copyright (C) 2002 Monroe Williams (monroe@pobox.com)
+	 */
+
+	int i, prevY, nextY;
+
+	prevY = 512;
+	nextY = 512;
+
+	data += VICAM_HEADER_SIZE;
+
+	for( i = 0; i < 240; i++, data += 512 ) {
+		const int y = ( i * 242 ) / 240;
+
+		int j, prevX, nextX;
+		int Y, Cr, Cb;
+
+		if ( y == 242 - 1 ) {
+			nextY = -512;
+		}
+
+		prevX = 1;
+		nextX = 1;
+
+		for ( j = 0; j < 320; j++, rgb += 3 ) {
+			const int x = ( j * 512 ) / 320;
+			const u8 * const src = &data[x];
+
+			if ( x == 512 - 1 ) {
+				nextX = -1;
+			}
+
+			Cr = ( src[prevX] - src[0] ) +
+				( src[nextX] - src[0] );
+			Cr /= 2;
+
+			Cb = ( src[prevY] - src[prevX + prevY] ) +
+				( src[prevY] - src[nextX + prevY] ) +
+				( src[nextY] - src[prevX + nextY] ) +
+				( src[nextY] - src[nextX + nextY] );
+			Cb /= 4;
+
+			Y = 1160 * ( src[0] + ( Cr / 2 ) - 16 );
+
+			if ( i & 1 ) {
+				int Ct = Cr;
+				Cr = Cb;
+				Cb = Ct;
+			}
+
+			if ( ( x ^ i ) & 1 ) {
+				Cr = -Cr;
+				Cb = -Cb;
+			}
+
+			rgb[0] = clamp( ( ( Y + ( 2017 * Cb ) ) +
+					500 ) / 900, 0, 255 );
+			rgb[1] = clamp( ( ( Y - ( 392 * Cb ) -
+					  ( 813 * Cr ) ) +
+					  500 ) / 1000, 0, 255 );
+			rgb[2] = clamp( ( ( Y + ( 1594 * Cr ) ) +
+					500 ) / 1300, 0, 255 );
+
+			prevX = -1;
+		}
+
+		prevY = -512;
+	}
+}
+
+static void
+read_frame(struct vicam_camera *cam, int framenum)
+{
+	unsigned char *request = cam->cntrlbuf;
+	int realShutter;
+	int n;
+	int actual_length;
+
+	if (cam->needsDummyRead) {
+		cam->needsDummyRead = 0;
+		read_frame(cam, framenum);
+	}
+
+	memset(request, 0, 16);
+	request[0] = cam->gain;	// 0 = 0% gain, FF = 100% gain
+
+	request[1] = 0;	// 512x242 capture
+
+	request[2] = 0x90;	// the function of these two bytes
+	request[3] = 0x07;	// is not yet understood
+
+	if (cam->shutter_speed > 60) {
+		// Short exposure
+		realShutter =
+		    ((-15631900 / cam->shutter_speed) + 260533) / 1000;
+		request[4] = realShutter & 0xFF;
+		request[5] = (realShutter >> 8) & 0xFF;
+		request[6] = 0x03;
+		request[7] = 0x01;
+	} else {
+		// Long exposure
+		realShutter = 15600 / cam->shutter_speed - 1;
+		request[4] = 0;
+		request[5] = 0;
+		request[6] = realShutter & 0xFF;
+		request[7] = realShutter >> 8;
+	}
+
+	// Per John Markus Bj�rndalen, byte at index 8 causes problems if it isn't 0
+	request[8] = 0;
+	// bytes 9-15 do not seem to affect exposure or image quality
+
+	mutex_lock(&cam->cam_lock);
+
+	if (!cam->udev) {
+		goto done;
+	}
+
+	n = __send_control_msg(cam, 0x51, 0x80, 0, request, 16);
+
+	if (n < 0) {
+		printk(KERN_ERR
+		       " Problem sending frame capture control message");
+		goto done;
+	}
+
+	n = usb_bulk_msg(cam->udev,
+			 usb_rcvbulkpipe(cam->udev, cam->bulkEndpoint),
+			 cam->raw_image,
+			 512 * 242 + 128, &actual_length, 10000);
+
+	if (n < 0) {
+		printk(KERN_ERR "Problem during bulk read of frame data: %d\n",
+		       n);
+	}
+
+ done:
+	mutex_unlock(&cam->cam_lock);
+}
+
+static ssize_t
+vicam_read( struct file *file, char __user *buf, size_t count, loff_t *ppos )
+{
+	struct vicam_camera *cam = file->private_data;
+
+	DBG("read %d bytes.\n", (int) count);
+
+	if (*ppos >= VICAM_MAX_FRAME_SIZE) {
+		*ppos = 0;
+		return 0;
+	}
+
+	if (*ppos == 0) {
+		read_frame(cam, 0);
+		vicam_decode_color(cam->raw_image,
+				   cam->framebuf +
+				   0 * VICAM_MAX_FRAME_SIZE);
+	}
+
+	count = min_t(size_t, count, VICAM_MAX_FRAME_SIZE - *ppos);
+
+	if (copy_to_user(buf, &cam->framebuf[*ppos], count)) {
+		count = -EFAULT;
+	} else {
+		*ppos += count;
+	}
+
+	if (count == VICAM_MAX_FRAME_SIZE) {
+		*ppos = 0;
+	}
+
+	return count;
+}
+
+
+static int
+vicam_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	// TODO: allocate the raw frame buffer if necessary
+	unsigned long page, pos;
+	unsigned long start = vma->vm_start;
+	unsigned long size  = vma->vm_end-vma->vm_start;
+	struct vicam_camera *cam = file->private_data;
+
+	if (!cam)
+		return -ENODEV;
+
+	DBG("vicam_mmap: %ld\n", size);
+
+	/* We let mmap allocate as much as it wants because Linux was adding 2048 bytes
+	 * to the size the application requested for mmap and it was screwing apps up.
+	 if (size > VICAM_FRAMES*VICAM_MAX_FRAME_SIZE)
+	 return -EINVAL;
+	 */
+
+	pos = (unsigned long)cam->framebuf;
+	while (size > 0) {
+		page = vmalloc_to_pfn((void *)pos);
+		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+			return -EAGAIN;
+
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		if (size > PAGE_SIZE)
+			size -= PAGE_SIZE;
+		else
+			size = 0;
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_VIDEO_PROC_FS)
+
+static struct proc_dir_entry *vicam_proc_root = NULL;
+
+static int vicam_read_helper(char *page, char **start, off_t off,
+				int count, int *eof, int value)
+{
+	char *out = page;
+	int len;
+
+	out += sprintf(out, "%d",value);
+
+	len = out - page;
+	len -= off;
+	if (len < count) {
+		*eof = 1;
+		if (len <= 0)
+			return 0;
+	} else
+		len = count;
+
+	*start = page + off;
+	return len;
+}
+
+static int vicam_read_proc_shutter(char *page, char **start, off_t off,
+				int count, int *eof, void *data)
+{
+	return vicam_read_helper(page,start,off,count,eof,
+				((struct vicam_camera *)data)->shutter_speed);
+}
+
+static int vicam_read_proc_gain(char *page, char **start, off_t off,
+				int count, int *eof, void *data)
+{
+	return vicam_read_helper(page,start,off,count,eof,
+				((struct vicam_camera *)data)->gain);
+}
+
+static int
+vicam_write_proc_shutter(struct file *file, const char *buffer,
+			 unsigned long count, void *data)
+{
+	u16 stmp;
+	char kbuf[8];
+	struct vicam_camera *cam = (struct vicam_camera *) data;
+
+	if (count > 6)
+		return -EINVAL;
+
+	if (copy_from_user(kbuf, buffer, count))
+		return -EFAULT;
+
+	stmp = (u16) simple_strtoul(kbuf, NULL, 10);
+	if (stmp < 4 || stmp > 32000)
+		return -EINVAL;
+
+	cam->shutter_speed = stmp;
+
+	return count;
+}
+
+static int
+vicam_write_proc_gain(struct file *file, const char *buffer,
+		      unsigned long count, void *data)
+{
+	u16 gtmp;
+	char kbuf[8];
+
+	struct vicam_camera *cam = (struct vicam_camera *) data;
+
+	if (count > 4)
+		return -EINVAL;
+
+	if (copy_from_user(kbuf, buffer, count))
+		return -EFAULT;
+
+	gtmp = (u16) simple_strtoul(kbuf, NULL, 10);
+	if (gtmp > 255)
+		return -EINVAL;
+	cam->gain = gtmp;
+
+	return count;
+}
+
+static void
+vicam_create_proc_root(void)
+{
+	vicam_proc_root = proc_mkdir("video/vicam", NULL);
+
+	if (vicam_proc_root)
+		vicam_proc_root->owner = THIS_MODULE;
+	else
+		printk(KERN_ERR
+		       "could not create /proc entry for vicam!");
+}
+
+static void
+vicam_destroy_proc_root(void)
+{
+	if (vicam_proc_root)
+		remove_proc_entry("video/vicam", 0);
+}
+
+static void
+vicam_create_proc_entry(struct vicam_camera *cam)
+{
+	char name[64];
+	struct proc_dir_entry *ent;
+
+	DBG(KERN_INFO "vicam: creating proc entry\n");
+
+	if (!vicam_proc_root || !cam) {
+		printk(KERN_INFO
+		       "vicam: could not create proc entry, %s pointer is null.\n",
+		       (!cam ? "camera" : "root"));
+		return;
+	}
+
+	sprintf(name, "video%d", cam->vdev.minor);
+
+	cam->proc_dir = proc_mkdir(name, vicam_proc_root);
+
+	if ( !cam->proc_dir )
+		return; // FIXME: We should probably return an error here
+
+	ent = create_proc_entry("shutter", S_IFREG | S_IRUGO | S_IWUSR,
+				cam->proc_dir);
+	if (ent) {
+		ent->data = cam;
+		ent->read_proc = vicam_read_proc_shutter;
+		ent->write_proc = vicam_write_proc_shutter;
+		ent->size = 64;
+	}
+
+	ent = create_proc_entry("gain", S_IFREG | S_IRUGO | S_IWUSR,
+				cam->proc_dir);
+	if (ent) {
+		ent->data = cam;
+		ent->read_proc = vicam_read_proc_gain;
+		ent->write_proc = vicam_write_proc_gain;
+		ent->size = 64;
+	}
+}
+
+static void
+vicam_destroy_proc_entry(void *ptr)
+{
+	struct vicam_camera *cam = (struct vicam_camera *) ptr;
+	char name[16];
+
+	if ( !cam->proc_dir )
+		return;
+
+	sprintf(name, "video%d", cam->vdev.minor);
+	remove_proc_entry("shutter", cam->proc_dir);
+	remove_proc_entry("gain", cam->proc_dir);
+	remove_proc_entry(name,vicam_proc_root);
+	cam->proc_dir = NULL;
+
+}
+
+#else
+static inline void vicam_create_proc_root(void) { }
+static inline void vicam_destroy_proc_root(void) { }
+static inline void vicam_create_proc_entry(struct vicam_camera *cam) { }
+static inline void vicam_destroy_proc_entry(void *ptr) { }
+#endif
+
+static struct file_operations vicam_fops = {
+	.owner		= THIS_MODULE,
+	.open		= vicam_open,
+	.release	= vicam_close,
+	.read		= vicam_read,
+	.mmap		= vicam_mmap,
+	.ioctl		= vicam_ioctl,
+	.compat_ioctl	= v4l_compat_ioctl32,
+	.llseek		= no_llseek,
+};
+
+static struct video_device vicam_template = {
+	.owner 		= THIS_MODULE,
+	.name 		= "ViCam-based USB Camera",
+	.type 		= VID_TYPE_CAPTURE,
+	.hardware 	= VID_HARDWARE_VICAM,
+	.fops 		= &vicam_fops,
+	.minor 		= -1,
+};
+
+/* table of devices that work with this driver */
+static struct usb_device_id vicam_table[] = {
+	{USB_DEVICE(USB_VICAM_VENDOR_ID, USB_VICAM_PRODUCT_ID)},
+	{}			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, vicam_table);
+
+static struct usb_driver vicam_driver = {
+	.name		= "vicam",
+	.probe		= vicam_probe,
+	.disconnect	= vicam_disconnect,
+	.id_table	= vicam_table
+};
+
+/**
+ *	vicam_probe
+ *	@intf: the interface
+ *	@id: the device id
+ *
+ *	Called by the usb core when a new device is connected that it thinks
+ *	this driver might be interested in.
+ */
+static int
+vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	int bulkEndpoint = 0;
+	const struct usb_host_interface *interface;
+	const struct usb_endpoint_descriptor *endpoint;
+	struct vicam_camera *cam;
+
+	printk(KERN_INFO "ViCam based webcam connected\n");
+
+	interface = intf->cur_altsetting;
+
+	DBG(KERN_DEBUG "Interface %d. has %u. endpoints!\n",
+	       interface->desc.bInterfaceNumber, (unsigned) (interface->desc.bNumEndpoints));
+	endpoint = &interface->endpoint[0].desc;
+
+	if ((endpoint->bEndpointAddress & 0x80) &&
+	    ((endpoint->bmAttributes & 3) == 0x02)) {
+		/* we found a bulk in endpoint */
+		bulkEndpoint = endpoint->bEndpointAddress;
+	} else {
+		printk(KERN_ERR
+		       "No bulk in endpoint was found ?! (this is bad)\n");
+	}
+
+	if ((cam =
+	     kmalloc(sizeof (struct vicam_camera), GFP_KERNEL)) == NULL) {
+		printk(KERN_WARNING
+		       "could not allocate kernel memory for vicam_camera struct\n");
+		return -ENOMEM;
+	}
+
+	memset(cam, 0, sizeof (struct vicam_camera));
+
+	cam->shutter_speed = 15;
+
+	mutex_init(&cam->cam_lock);
+
+	memcpy(&cam->vdev, &vicam_template,
+	       sizeof (vicam_template));
+	cam->vdev.priv = cam;	// sort of a reverse mapping for those functions that get vdev only
+
+	cam->udev = dev;
+	cam->bulkEndpoint = bulkEndpoint;
+
+	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) == -1) {
+		kfree(cam);
+		printk(KERN_WARNING "video_register_device failed\n");
+		return -EIO;
+	}
+
+	vicam_create_proc_entry(cam);
+
+	printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor);
+
+	usb_set_intfdata (intf, cam);
+
+	return 0;
+}
+
+static void
+vicam_disconnect(struct usb_interface *intf)
+{
+	int open_count;
+	struct vicam_camera *cam = usb_get_intfdata (intf);
+	usb_set_intfdata (intf, NULL);
+
+	/* we must unregister the device before taking its
+	 * cam_lock. This is because the video open call
+	 * holds the same lock as video unregister. if we
+	 * unregister inside of the cam_lock and open also
+	 * uses the cam_lock, we get deadlock.
+	 */
+
+	video_unregister_device(&cam->vdev);
+
+	/* stop the camera from being used */
+
+	mutex_lock(&cam->cam_lock);
+
+	/* mark the camera as gone */
+
+	cam->udev = NULL;
+
+	vicam_destroy_proc_entry(cam);
+
+	/* the only thing left to do is synchronize with
+	 * our close/release function on who should release
+	 * the camera memory. if there are any users using the
+	 * camera, it's their job. if there are no users,
+	 * it's ours.
+	 */
+
+	open_count = cam->open_count;
+
+	mutex_unlock(&cam->cam_lock);
+
+	if (!open_count) {
+		kfree(cam);
+	}
+
+	printk(KERN_DEBUG "ViCam-based WebCam disconnected\n");
+}
+
+/*
+ */
+static int __init
+usb_vicam_init(void)
+{
+	int retval;
+	DBG(KERN_INFO "ViCam-based WebCam driver startup\n");
+	vicam_create_proc_root();
+	retval = usb_register(&vicam_driver);
+	if (retval)
+		printk(KERN_WARNING "usb_register failed!\n");
+	return retval;
+}
+
+static void __exit
+usb_vicam_exit(void)
+{
+	DBG(KERN_INFO
+	       "ViCam-based WebCam driver shutdown\n");
+
+	usb_deregister(&vicam_driver);
+	vicam_destroy_proc_root();
+}
+
+module_init(usb_vicam_init);
+module_exit(usb_vicam_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 95a6e47c99f1..11a97f30b876 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -312,8 +312,6 @@ static const char *v4l2_int_ioctls[] = {
 	[_IOC_NR(DECODER_DUMP)]                = "DECODER_DUMP",
 #endif
 	[_IOC_NR(AUDC_SET_RADIO)]              = "AUDC_SET_RADIO",
-	[_IOC_NR(AUDC_SET_INPUT)]              = "AUDC_SET_INPUT",
-	[_IOC_NR(MSP_SET_MATRIX)]              = "MSP_SET_MATRIX",
 
 	[_IOC_NR(TUNER_SET_TYPE_ADDR)]         = "TUNER_SET_TYPE_ADDR",
 	[_IOC_NR(TUNER_SET_STANDBY)]           = "TUNER_SET_STANDBY",
@@ -419,7 +417,6 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 	case TUNER_SET_TYPE_ADDR:
 	case TUNER_SET_STANDBY:
 	case TDA9887_SET_CONFIG:
-	case AUDC_SET_INPUT:
 	case VIDIOC_OVERLAY_OLD:
 	case VIDIOC_STREAMOFF:
 	case VIDIOC_G_OUTPUT:
@@ -433,12 +430,6 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 		printk ("%s: value=%d\n", s, *p);
 		break;
 	}
-	case MSP_SET_MATRIX:
-	{
-		struct msp_matrix *p=arg;
-		printk ("%s: input=%d, output=%d\n", s, p->input, p->output);
-		break;
-	}
 	case VIDIOC_G_AUDIO:
 	case VIDIOC_S_AUDIO:
 	case VIDIOC_ENUMAUDIO:
@@ -467,7 +458,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 		struct v4l2_buffer *p=arg;
 		struct v4l2_timecode *tc=&p->timecode;
 		printk ("%s: %02ld:%02d:%02d.%08ld index=%d, type=%s, "
-			"bytesused=%d, flags=0x%08d, "
+			"bytesused=%d, flags=0x%08x, "
 			"field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx\n",
 				s,
 				(p->timestamp.tv_sec/3600),
@@ -481,16 +472,16 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 				prt_names(p->memory,v4l2_memory_names),
 				p->m.userptr);
 		printk ("%s: timecode= %02d:%02d:%02d type=%d, "
-			"flags=0x%08d, frames=%d, userbits=0x%08x",
+			"flags=0x%08x, frames=%d, userbits=0x%p\n",
 				s,tc->hours,tc->minutes,tc->seconds,
-				tc->type, tc->flags, tc->frames, (__u32) tc->userbits);
+				tc->type, tc->flags, tc->frames, tc->userbits);
 		break;
 	}
 	case VIDIOC_QUERYCAP:
 	{
 		struct v4l2_capability *p=arg;
-		printk ("%s: driver=%s, card=%s, bus=%s, version=%d, "
-			"capabilities=%d\n", s,
+		printk ("%s: driver=%s, card=%s, bus=%s, version=0x%08x, "
+			"capabilities=0x%08x\n", s,
 				p->driver,p->card,p->bus_info,
 				p->version,
 				p->capabilities);
@@ -574,9 +565,10 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 	{
 		struct v4l2_input *p=arg;
 		printk ("%s: index=%d, name=%s, type=%d, audioset=%d, "
-			"tuner=%d, std=%lld, status=%d\n", s,
+			"tuner=%d, std=%Ld, status=%d\n", s,
 				p->index,p->name,p->type,p->audioset,
-				p->tuner,p->std,
+				p->tuner,
+				(unsigned long long)p->std,
 				p->status);
 		break;
 	}
@@ -620,9 +612,10 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 	{
 		struct v4l2_output *p=arg;
 		printk ("%s: index=%d, name=%s,type=%d, audioset=%d, "
-			"modulator=%d, std=%lld\n",
+			"modulator=%d, std=%Ld\n",
 				s,p->index,p->name,p->type,p->audioset,
-				p->modulator,p->std);
+				p->modulator,
+				(unsigned long long)p->std);
 		break;
 	}
 	case VIDIOC_QUERYCTRL:
@@ -665,7 +658,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 	case VIDIOC_INT_G_VIDEO_ROUTING:
 	{
 		struct v4l2_routing  *p=arg;
-		printk ("%s: input=%d, output=%d\n", s, p->input, p->output);
+		printk ("%s: input=0x%x, output=0x%x\n", s, p->input, p->output);
 		break;
 	}
 	case VIDIOC_G_SLICED_VBI_CAP:
@@ -686,8 +679,9 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 	case VIDIOC_ENUMSTD:
 	{
 		struct v4l2_standard *p=arg;
-		printk ("%s: index=%d, id=%lld, name=%s, fps=%d/%d, framelines=%d\n", s,
-				p->index, p->id, p->name,
+		printk ("%s: index=%d, id=%Ld, name=%s, fps=%d/%d, "
+			"framelines=%d\n", s, p->index,
+				(unsigned long long)p->id, p->name,
 				p->frameperiod.numerator,
 				p->frameperiod.denominator,
 				p->framelines);
@@ -907,7 +901,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 	{
 		v4l2_std_id *p=arg;
 
-		printk ("%s: value=%llu\n", s, *p);
+		printk ("%s: value=%Lu\n", s, (unsigned long long)*p);
 		break;
 	}
 	}
diff --git a/drivers/media/video/video-buf.c b/drivers/media/video/video-buf.c
index 87e937581d5a..d2ca0f08d0df 100644
--- a/drivers/media/video/video-buf.c
+++ b/drivers/media/video/video-buf.c
@@ -1,15 +1,20 @@
 /*
  *
  * generic helper functions for video4linux capture buffers, to handle
- * memory management and PCI DMA.  Right now bttv + saa7134 use it.
+ * memory management and PCI DMA.
+ * Right now, bttv, saa7134, saa7146 and cx88 use it.
  *
  * The functions expect the hardware being able to scatter gatter
  * (i.e. the buffers are not linear in physical memory, but fragmented
  * into PAGE_SIZE chunks).  They also assume the driver does not need
- * to touch the video data (thus it is probably not useful for USB 1.1
- * as data often must be uncompressed by the drivers).
+ * to touch the video data.
+ *
+ * device specific map/unmap/sync stuff now are mapped as operations
+ * to allow its usage by USB and virtual devices.
  *
  * (c) 2001-2004 Gerd Knorr <kraxel@bytesex.org> [SUSE Labs]
+ * (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
+ * (c) 2006 Ted Walther and John Sokol
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -167,6 +172,9 @@ int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction,
 		dprintk(1,"vmalloc_32(%d pages) failed\n",nr_pages);
 		return -ENOMEM;
 	}
+	dprintk(1,"vmalloc is at addr 0x%08lx, size=%d\n",
+				(unsigned long)dma->vmalloc,
+				nr_pages << PAGE_SHIFT);
 	memset(dma->vmalloc,0,nr_pages << PAGE_SHIFT);
 	dma->nr_pages = nr_pages;
 	return 0;
@@ -186,8 +194,10 @@ int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction,
 	return 0;
 }
 
-int videobuf_dma_pci_map(struct pci_dev *dev, struct videobuf_dmabuf *dma)
+int videobuf_dma_map(struct videobuf_queue* q,struct videobuf_dmabuf *dma)
 {
+	void                   *dev=q->dev;
+
 	MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
 	BUG_ON(0 == dma->nr_pages);
 
@@ -197,7 +207,7 @@ int videobuf_dma_pci_map(struct pci_dev *dev, struct videobuf_dmabuf *dma)
 	}
 	if (dma->vmalloc) {
 		dma->sglist = videobuf_vmalloc_to_sg
-			(dma->vmalloc,dma->nr_pages);
+						(dma->vmalloc,dma->nr_pages);
 	}
 	if (dma->bus_addr) {
 		dma->sglist = kmalloc(sizeof(struct scatterlist), GFP_KERNEL);
@@ -212,13 +222,14 @@ int videobuf_dma_pci_map(struct pci_dev *dev, struct videobuf_dmabuf *dma)
 		dprintk(1,"scatterlist is NULL\n");
 		return -ENOMEM;
 	}
-
 	if (!dma->bus_addr) {
-		dma->sglen = pci_map_sg(dev,dma->sglist,dma->nr_pages,
-					dma->direction);
+		if (q->ops->vb_map_sg) {
+			dma->sglen = q->ops->vb_map_sg(dev,dma->sglist,
+					dma->nr_pages, dma->direction);
+		}
 		if (0 == dma->sglen) {
 			printk(KERN_WARNING
-			       "%s: pci_map_sg failed\n",__FUNCTION__);
+			       "%s: videobuf_map_sg failed\n",__FUNCTION__);
 			kfree(dma->sglist);
 			dma->sglist = NULL;
 			dma->sglen = 0;
@@ -228,24 +239,31 @@ int videobuf_dma_pci_map(struct pci_dev *dev, struct videobuf_dmabuf *dma)
 	return 0;
 }
 
-int videobuf_dma_pci_sync(struct pci_dev *dev, struct videobuf_dmabuf *dma)
+int videobuf_dma_sync(struct videobuf_queue* q,struct videobuf_dmabuf *dma)
 {
+	void                   *dev=q->dev;
+
 	MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
 	BUG_ON(!dma->sglen);
 
-	if (!dma->bus_addr)
-		pci_dma_sync_sg_for_cpu(dev,dma->sglist,dma->nr_pages,dma->direction);
+	if (!dma->bus_addr && q->ops->vb_dma_sync_sg)
+		q->ops->vb_dma_sync_sg(dev,dma->sglist,dma->nr_pages,
+							dma->direction);
+
 	return 0;
 }
 
-int videobuf_dma_pci_unmap(struct pci_dev *dev, struct videobuf_dmabuf *dma)
+int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma)
 {
+	void                   *dev=q->dev;
+
 	MAGIC_CHECK(dma->magic,MAGIC_DMABUF);
 	if (!dma->sglen)
 		return 0;
 
-	if (!dma->bus_addr)
-		pci_unmap_sg(dev,dma->sglist,dma->nr_pages,dma->direction);
+	if (!dma->bus_addr && q->ops->vb_unmap_sg)
+			q->ops->vb_unmap_sg(dev,dma->sglist,dma->nr_pages,
+							dma->direction);
 	kfree(dma->sglist);
 	dma->sglist = NULL;
 	dma->sglen = 0;
@@ -318,7 +336,7 @@ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr)
 }
 
 int
-videobuf_iolock(struct pci_dev *pci, struct videobuf_buffer *vb,
+videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
 		struct v4l2_framebuffer *fbuf)
 {
 	int err,pages;
@@ -357,7 +375,7 @@ videobuf_iolock(struct pci_dev *pci, struct videobuf_buffer *vb,
 	default:
 		BUG();
 	}
-	err = videobuf_dma_pci_map(pci,&vb->dma);
+	err = videobuf_dma_map(q,&vb->dma);
 	if (0 != err)
 		return err;
 
@@ -366,9 +384,41 @@ videobuf_iolock(struct pci_dev *pci, struct videobuf_buffer *vb,
 
 /* --------------------------------------------------------------------- */
 
+void videobuf_queue_pci(struct videobuf_queue* q)
+{
+	/* If not specified, defaults to PCI map sg */
+	if (!q->ops->vb_map_sg)
+		q->ops->vb_map_sg=(vb_map_sg_t *)pci_map_sg;
+
+	if (!q->ops->vb_dma_sync_sg)
+		q->ops->vb_dma_sync_sg=(vb_map_sg_t *)pci_dma_sync_sg_for_cpu;
+	if (!q->ops->vb_unmap_sg)
+		q->ops->vb_unmap_sg=(vb_map_sg_t *)pci_unmap_sg;
+}
+
+int videobuf_pci_dma_map(struct pci_dev *pci,struct videobuf_dmabuf *dma)
+{
+	struct videobuf_queue q;
+
+	q.dev=pci;
+	q.ops->vb_map_sg=(vb_map_sg_t *)pci_unmap_sg;
+
+	return (videobuf_dma_unmap(&q,dma));
+}
+
+int videobuf_pci_dma_unmap(struct pci_dev *pci,struct videobuf_dmabuf *dma)
+{
+	struct videobuf_queue q;
+
+	q.dev=pci;
+	q.ops->vb_map_sg=(vb_map_sg_t *)pci_unmap_sg;
+
+	return (videobuf_dma_unmap(&q,dma));
+}
+
 void videobuf_queue_init(struct videobuf_queue* q,
 			 struct videobuf_queue_ops *ops,
-			 struct pci_dev *pci,
+			 void *dev,
 			 spinlock_t *irqlock,
 			 enum v4l2_buf_type type,
 			 enum v4l2_field field,
@@ -377,13 +427,15 @@ void videobuf_queue_init(struct videobuf_queue* q,
 {
 	memset(q,0,sizeof(*q));
 	q->irqlock = irqlock;
-	q->pci     = pci;
+	q->dev     = dev;
 	q->type    = type;
 	q->field   = field;
 	q->msize   = msize;
 	q->ops     = ops;
 	q->priv_data = priv;
 
+	videobuf_queue_pci(q);
+
 	mutex_init(&q->lock);
 	INIT_LIST_HEAD(&q->stream);
 }
@@ -431,7 +483,8 @@ videobuf_queue_cancel(struct videobuf_queue *q)
 	int i;
 
 	/* remove queued buffers from list */
-	spin_lock_irqsave(q->irqlock,flags);
+	if (q->irqlock)
+		spin_lock_irqsave(q->irqlock,flags);
 	for (i = 0; i < VIDEO_MAX_FRAME; i++) {
 		if (NULL == q->bufs[i])
 			continue;
@@ -440,7 +493,8 @@ videobuf_queue_cancel(struct videobuf_queue *q)
 			q->bufs[i]->state = STATE_ERROR;
 		}
 	}
-	spin_unlock_irqrestore(q->irqlock,flags);
+	if (q->irqlock)
+		spin_unlock_irqrestore(q->irqlock,flags);
 
 	/* free all buffers + clear queue */
 	for (i = 0; i < VIDEO_MAX_FRAME; i++) {
@@ -534,19 +588,29 @@ videobuf_reqbufs(struct videobuf_queue *q,
 	unsigned int size,count;
 	int retval;
 
-	if (req->type != q->type)
+	if (req->type != q->type) {
+		dprintk(1,"reqbufs: queue type invalid\n");
 		return -EINVAL;
-	if (req->count < 1)
+	}
+	if (req->count < 1) {
+		dprintk(1,"reqbufs: count invalid (%d)\n",req->count);
 		return -EINVAL;
+	}
 	if (req->memory != V4L2_MEMORY_MMAP     &&
 	    req->memory != V4L2_MEMORY_USERPTR  &&
-	    req->memory != V4L2_MEMORY_OVERLAY)
+	    req->memory != V4L2_MEMORY_OVERLAY) {
+		dprintk(1,"reqbufs: memory type invalid\n");
 		return -EINVAL;
+	}
 
-	if (q->streaming)
+	if (q->streaming) {
+		dprintk(1,"reqbufs: streaming already exists\n");
 		return -EBUSY;
-	if (!list_empty(&q->stream))
+	}
+	if (!list_empty(&q->stream)) {
+		dprintk(1,"reqbufs: stream running\n");
 		return -EBUSY;
+	}
 
 	mutex_lock(&q->lock);
 	count = req->count;
@@ -559,8 +623,10 @@ videobuf_reqbufs(struct videobuf_queue *q,
 		count, size, (count*size)>>PAGE_SHIFT);
 
 	retval = videobuf_mmap_setup(q,count,size,req->memory);
-	if (retval < 0)
+	if (retval < 0) {
+		dprintk(1,"reqbufs: mmap setup returned %d\n",retval);
 		goto done;
+	}
 
 	req->count = count;
 
@@ -572,12 +638,18 @@ videobuf_reqbufs(struct videobuf_queue *q,
 int
 videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b)
 {
-	if (unlikely(b->type != q->type))
+	if (unlikely(b->type != q->type)) {
+		dprintk(1,"querybuf: Wrong type.\n");
 		return -EINVAL;
-	if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME))
+	}
+	if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) {
+		dprintk(1,"querybuf: index out of range.\n");
 		return -EINVAL;
-	if (unlikely(NULL == q->bufs[b->index]))
+	}
+	if (unlikely(NULL == q->bufs[b->index])) {
+		dprintk(1,"querybuf: buffer is null.\n");
 		return -EINVAL;
+	}
 	videobuf_status(b,q->bufs[b->index],q->type);
 	return 0;
 }
@@ -593,26 +665,40 @@ videobuf_qbuf(struct videobuf_queue *q,
 
 	mutex_lock(&q->lock);
 	retval = -EBUSY;
-	if (q->reading)
+	if (q->reading) {
+		dprintk(1,"qbuf: Reading running...\n");
 		goto done;
+	}
 	retval = -EINVAL;
-	if (b->type != q->type)
+	if (b->type != q->type) {
+		dprintk(1,"qbuf: Wrong type.\n");
 		goto done;
-	if (b->index < 0 || b->index >= VIDEO_MAX_FRAME)
+	}
+	if (b->index < 0 || b->index >= VIDEO_MAX_FRAME) {
+		dprintk(1,"qbuf: index out of range.\n");
 		goto done;
+	}
 	buf = q->bufs[b->index];
-	if (NULL == buf)
+	if (NULL == buf) {
+		dprintk(1,"qbuf: buffer is null.\n");
 		goto done;
+	}
 	MAGIC_CHECK(buf->magic,MAGIC_BUFFER);
-	if (buf->memory != b->memory)
+	if (buf->memory != b->memory) {
+		dprintk(1,"qbuf: memory type is wrong.\n");
 		goto done;
+	}
 	if (buf->state == STATE_QUEUED ||
-	    buf->state == STATE_ACTIVE)
+	    buf->state == STATE_ACTIVE) {
+		dprintk(1,"qbuf: buffer is already queued or active.\n");
 		goto done;
+	}
 
 	if (b->flags & V4L2_BUF_FLAG_INPUT) {
-		if (b->input >= q->inputs)
+		if (b->input >= q->inputs) {
+			dprintk(1,"qbuf: wrong input.\n");
 			goto done;
+		}
 		buf->input = b->input;
 	} else {
 		buf->input = UNSET;
@@ -620,12 +706,16 @@ videobuf_qbuf(struct videobuf_queue *q,
 
 	switch (b->memory) {
 	case V4L2_MEMORY_MMAP:
-		if (0 == buf->baddr)
+		if (0 == buf->baddr) {
+			dprintk(1,"qbuf: mmap requested but buffer addr is zero!\n");
 			goto done;
+		}
 		break;
 	case V4L2_MEMORY_USERPTR:
-		if (b->length < buf->bsize)
+		if (b->length < buf->bsize) {
+			dprintk(1,"qbuf: buffer length is not enough\n");
 			goto done;
+		}
 		if (STATE_NEEDS_INIT != buf->state && buf->baddr != b->m.userptr)
 			q->ops->buf_release(q,buf);
 		buf->baddr = b->m.userptr;
@@ -634,20 +724,27 @@ videobuf_qbuf(struct videobuf_queue *q,
 		buf->boff = b->m.offset;
 		break;
 	default:
+		dprintk(1,"qbuf: wrong memory type\n");
 		goto done;
 	}
 
+	dprintk(1,"qbuf: requesting next field\n");
 	field = videobuf_next_field(q);
 	retval = q->ops->buf_prepare(q,buf,field);
-	if (0 != retval)
+	if (0 != retval) {
+		dprintk(1,"qbuf: buffer_prepare returned %d\n",retval);
 		goto done;
+	}
 
 	list_add_tail(&buf->stream,&q->stream);
 	if (q->streaming) {
-		spin_lock_irqsave(q->irqlock,flags);
+		if (q->irqlock)
+			spin_lock_irqsave(q->irqlock,flags);
 		q->ops->buf_queue(q,buf);
-		spin_unlock_irqrestore(q->irqlock,flags);
+		if (q->irqlock)
+			spin_unlock_irqrestore(q->irqlock,flags);
 	}
+	dprintk(1,"qbuf: succeded\n");
 	retval = 0;
 
  done:
@@ -664,26 +761,39 @@ videobuf_dqbuf(struct videobuf_queue *q,
 
 	mutex_lock(&q->lock);
 	retval = -EBUSY;
-	if (q->reading)
+	if (q->reading) {
+		dprintk(1,"dqbuf: Reading running...\n");
 		goto done;
+	}
 	retval = -EINVAL;
-	if (b->type != q->type)
+	if (b->type != q->type) {
+		dprintk(1,"dqbuf: Wrong type.\n");
 		goto done;
-	if (list_empty(&q->stream))
+	}
+	if (list_empty(&q->stream)) {
+		dprintk(1,"dqbuf: stream running\n");
 		goto done;
+	}
 	buf = list_entry(q->stream.next, struct videobuf_buffer, stream);
 	retval = videobuf_waiton(buf, nonblocking, 1);
-	if (retval < 0)
+	if (retval < 0) {
+		dprintk(1,"dqbuf: waiton returned %d\n",retval);
 		goto done;
+	}
 	switch (buf->state) {
 	case STATE_ERROR:
+		dprintk(1,"dqbuf: state is error\n");
 		retval = -EIO;
-		/* fall through */
+		videobuf_dma_sync(q,&buf->dma);
+		buf->state = STATE_IDLE;
+		break;
 	case STATE_DONE:
-		videobuf_dma_pci_sync(q->pci,&buf->dma);
+		dprintk(1,"dqbuf: state is done\n");
+		videobuf_dma_sync(q,&buf->dma);
 		buf->state = STATE_IDLE;
 		break;
 	default:
+		dprintk(1,"dqbuf: state invalid\n");
 		retval = -EINVAL;
 		goto done;
 	}
@@ -711,13 +821,15 @@ int videobuf_streamon(struct videobuf_queue *q)
 	if (q->streaming)
 		goto done;
 	q->streaming = 1;
-	spin_lock_irqsave(q->irqlock,flags);
+	if (q->irqlock)
+		spin_lock_irqsave(q->irqlock,flags);
 	list_for_each(list,&q->stream) {
 		buf = list_entry(list, struct videobuf_buffer, stream);
 		if (buf->state == STATE_PREPARED)
 			q->ops->buf_queue(q,buf);
 	}
-	spin_unlock_irqrestore(q->irqlock,flags);
+	if (q->irqlock)
+		spin_unlock_irqrestore(q->irqlock,flags);
 
  done:
 	mutex_unlock(&q->lock);
@@ -762,12 +874,14 @@ videobuf_read_zerocopy(struct videobuf_queue *q, char __user *data,
 		goto done;
 
 	/* start capture & wait */
-	spin_lock_irqsave(q->irqlock,flags);
+	if (q->irqlock)
+		spin_lock_irqsave(q->irqlock,flags);
 	q->ops->buf_queue(q,q->read_buf);
-	spin_unlock_irqrestore(q->irqlock,flags);
+	if (q->irqlock)
+		spin_unlock_irqrestore(q->irqlock,flags);
 	retval = videobuf_waiton(q->read_buf,0,0);
 	if (0 == retval) {
-		videobuf_dma_pci_sync(q->pci,&q->read_buf->dma);
+		videobuf_dma_sync(q,&q->read_buf->dma);
 		if (STATE_ERROR == q->read_buf->state)
 			retval = -EIO;
 		else
@@ -809,6 +923,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q,
 		/* need to capture a new frame */
 		retval = -ENOMEM;
 		q->read_buf = videobuf_alloc(q->msize);
+		dprintk(1,"video alloc=0x%08x\n",(unsigned int) q->read_buf);
 		if (NULL == q->read_buf)
 			goto done;
 		q->read_buf->memory = V4L2_MEMORY_USERPTR;
@@ -820,9 +935,11 @@ ssize_t videobuf_read_one(struct videobuf_queue *q,
 			q->read_buf = NULL;
 			goto done;
 		}
-		spin_lock_irqsave(q->irqlock,flags);
+		if (q->irqlock)
+			spin_lock_irqsave(q->irqlock,flags);
 		q->ops->buf_queue(q,q->read_buf);
-		spin_unlock_irqrestore(q->irqlock,flags);
+		if (q->irqlock)
+			spin_unlock_irqrestore(q->irqlock,flags);
 		q->read_off = 0;
 	}
 
@@ -830,7 +947,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q,
 	retval = videobuf_waiton(q->read_buf, nonblocking, 1);
 	if (0 != retval)
 		goto done;
-	videobuf_dma_pci_sync(q->pci,&q->read_buf->dma);
+	videobuf_dma_sync(q,&q->read_buf->dma);
 
 	if (STATE_ERROR == q->read_buf->state) {
 		/* catch I/O errors */
@@ -887,10 +1004,12 @@ int videobuf_read_start(struct videobuf_queue *q)
 			return err;
 		list_add_tail(&q->bufs[i]->stream, &q->stream);
 	}
-	spin_lock_irqsave(q->irqlock,flags);
+	if (q->irqlock)
+		spin_lock_irqsave(q->irqlock,flags);
 	for (i = 0; i < count; i++)
 		q->ops->buf_queue(q,q->bufs[i]);
-	spin_unlock_irqrestore(q->irqlock,flags);
+	if (q->irqlock)
+		spin_unlock_irqrestore(q->irqlock,flags);
 	q->reading = 1;
 	return 0;
 }
@@ -985,9 +1104,11 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q,
 		if (q->read_off == q->read_buf->size) {
 			list_add_tail(&q->read_buf->stream,
 				      &q->stream);
-			spin_lock_irqsave(q->irqlock,flags);
+			if (q->irqlock)
+				spin_lock_irqsave(q->irqlock,flags);
 			q->ops->buf_queue(q,q->read_buf);
-			spin_unlock_irqrestore(q->irqlock,flags);
+			if (q->irqlock)
+				spin_unlock_irqrestore(q->irqlock,flags);
 			q->read_buf = NULL;
 		}
 		if (retval < 0)
@@ -1249,11 +1370,14 @@ EXPORT_SYMBOL_GPL(videobuf_dma_init);
 EXPORT_SYMBOL_GPL(videobuf_dma_init_user);
 EXPORT_SYMBOL_GPL(videobuf_dma_init_kernel);
 EXPORT_SYMBOL_GPL(videobuf_dma_init_overlay);
-EXPORT_SYMBOL_GPL(videobuf_dma_pci_map);
-EXPORT_SYMBOL_GPL(videobuf_dma_pci_sync);
-EXPORT_SYMBOL_GPL(videobuf_dma_pci_unmap);
+EXPORT_SYMBOL_GPL(videobuf_dma_map);
+EXPORT_SYMBOL_GPL(videobuf_dma_sync);
+EXPORT_SYMBOL_GPL(videobuf_dma_unmap);
 EXPORT_SYMBOL_GPL(videobuf_dma_free);
 
+EXPORT_SYMBOL_GPL(videobuf_pci_dma_map);
+EXPORT_SYMBOL_GPL(videobuf_pci_dma_unmap);
+
 EXPORT_SYMBOL_GPL(videobuf_alloc);
 EXPORT_SYMBOL_GPL(videobuf_waiton);
 EXPORT_SYMBOL_GPL(videobuf_iolock);
diff --git a/drivers/media/video/videocodec.h b/drivers/media/video/videocodec.h
index b1239ac7f371..8c233720b6a5 100644
--- a/drivers/media/video/videocodec.h
+++ b/drivers/media/video/videocodec.h
@@ -57,7 +57,7 @@
    therfor they may not be initialized.
 
    The other fuctions are just for convenience, as they are for sure used by
-   most/all of the codecs. The last ones may be ommited, too. 
+   most/all of the codecs. The last ones may be ommited, too.
 
    See the structure declaration below for more information and which data has
    to be set up for the master and the slave.
@@ -75,52 +75,52 @@
 /* ========================================== */
 
 /*
-   ==== master setup ==== 
+   ==== master setup ====
    name -> name of the device structure for reference and debugging
    master_data ->  data ref. for the master (e.g. the zr36055,57,67)
    readreg -> ref. to read-fn from register (setup by master, used by slave)
    writereg -> ref. to write-fn to register (setup by master, used by slave)
-               this two functions do the lowlevel I/O job
+	       this two functions do the lowlevel I/O job
 
-   ==== slave functionality setup ==== 
-   slave_data -> data ref. for the slave (e.g. the zr36050,60) 
+   ==== slave functionality setup ====
+   slave_data -> data ref. for the slave (e.g. the zr36050,60)
    check -> fn-ref. checks availability of an device, returns -EIO on failure or
-            the type on success
-            this makes espcecially sense if a driver module supports more than
-            one codec which may be quite similar to access, nevertheless it
-            is good for a first functionality check 
+	    the type on success
+	    this makes espcecially sense if a driver module supports more than
+	    one codec which may be quite similar to access, nevertheless it
+	    is good for a first functionality check
 
-   -- main functions you always need for compression/decompression -- 
+   -- main functions you always need for compression/decompression --
 
    set_mode -> this fn-ref. resets the entire codec, and sets up the mode
-               with the last defined norm/size (or device default if not
-               available) - it returns 0 if the mode is possible 
+	       with the last defined norm/size (or device default if not
+	       available) - it returns 0 if the mode is possible
    set_size -> this fn-ref. sets the norm and image size for
-               compression/decompression (returns 0 on success) 
-               the norm param is defined in videodev.h (VIDEO_MODE_*) 
+	       compression/decompression (returns 0 on success)
+	       the norm param is defined in videodev.h (VIDEO_MODE_*)
 
    additional setup may be available, too - but the codec should work with
-   some default values even without this 
+   some default values even without this
 
-   set_data -> sets device-specific data (tables, quality etc.) 
-   get_data -> query device-specific data (tables, quality etc.) 
+   set_data -> sets device-specific data (tables, quality etc.)
+   get_data -> query device-specific data (tables, quality etc.)
 
-   if the device delivers interrupts, they may be setup/handled here 
-   setup_interrupt -> codec irq setup (not needed for 36050/60) 
-   handle_interrupt -> codec irq handling (not needed for 36050/60) 
+   if the device delivers interrupts, they may be setup/handled here
+   setup_interrupt -> codec irq setup (not needed for 36050/60)
+   handle_interrupt -> codec irq handling (not needed for 36050/60)
 
-   if the device delivers pictures, they may be handled here 
-   put_image -> puts image data to the codec (not needed for 36050/60) 
-   get_image -> gets image data from the codec (not needed for 36050/60) 
-                the calls include frame numbers and flags (even/odd/...) 
-                if needed and a flag which allows blocking until its ready 
+   if the device delivers pictures, they may be handled here
+   put_image -> puts image data to the codec (not needed for 36050/60)
+   get_image -> gets image data from the codec (not needed for 36050/60)
+		the calls include frame numbers and flags (even/odd/...)
+		if needed and a flag which allows blocking until its ready
 */
 
 /* ============== */
 /* user interface */
 /* ============== */
 
-/* 
+/*
    Currently there is only a information display planned, as the layer
    is not visible for the user space at all.
 
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 0229819d0aac..a8c101494cf5 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -1555,12 +1555,12 @@ static void vino_update_line_size(struct vino_channel_settings *vcs)
 	unsigned int w = vcs->clipping.right - vcs->clipping.left;
 	unsigned int d = vcs->decimation;
 	unsigned int bpp = vino_data_formats[vcs->data_format].bpp;
-        unsigned int lsize;
+	unsigned int lsize;
 
 	dprintk("update_line_size(): before: w = %d, d = %d, "
 		"line_size = %d\n", w, d, vcs->line_size);
 
-        /* line size must be multiple of 8 bytes */
+	/* line size must be multiple of 8 bytes */
 	lsize = (bpp * (w / d)) & ~7;
 	w = (lsize / bpp) * d;
 
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
new file mode 100644
index 000000000000..5e813404d068
--- /dev/null
+++ b/drivers/media/video/vivi.c
@@ -0,0 +1,1454 @@
+/*
+ * Virtual Video driver - This code emulates a real video device with v4l2 api
+ *
+ * Copyright (c) 2006 by:
+ *      Mauro Carvalho Chehab <mchehab--a.t--infradead.org>
+ *      Ted Walther <ted--a.t--enumera.com>
+ *      John Sokol <sokol--a.t--videotechnology.com>
+ *      http://v4l.videotechnology.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the BSD Licence, GNU General Public License
+ * as published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version
+ */
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/random.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+#include <linux/interrupt.h>
+#include <media/video-buf.h>
+#include <media/v4l2-common.h>
+#include <linux/kthread.h>
+#include <linux/highmem.h>
+
+/* Wake up at about 30 fps */
+#define WAKE_NUMERATOR 30
+#define WAKE_DENOMINATOR 1001
+#define BUFFER_TIMEOUT     msecs_to_jiffies(500)  /* 0.5 seconds */
+
+/* These timers are for 1 fps - used only for testing */
+//#define WAKE_DENOMINATOR 30 /* hack for testing purposes */
+//#define BUFFER_TIMEOUT     msecs_to_jiffies(5000)  /* 5 seconds */
+
+#include "font.h"
+
+#ifndef kzalloc
+#define kzalloc(size, flags)                            \
+({                                                      \
+	void *__ret = kmalloc(size, flags);             \
+	if (__ret)                                      \
+		memset(__ret, 0, size);                 \
+	__ret;                                          \
+})
+#endif
+
+MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board");
+MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol");
+MODULE_LICENSE("Dual BSD/GPL");
+
+#define VIVI_MAJOR_VERSION 0
+#define VIVI_MINOR_VERSION 4
+#define VIVI_RELEASE 0
+#define VIVI_VERSION KERNEL_VERSION(VIVI_MAJOR_VERSION, VIVI_MINOR_VERSION, VIVI_RELEASE)
+
+static int video_nr = -1;        /* /dev/videoN, -1 for autodetect */
+module_param(video_nr, int, 0);
+
+static int debug = 0;
+module_param(debug, int, 0);
+
+static unsigned int vid_limit = 16;
+module_param(vid_limit,int,0644);
+MODULE_PARM_DESC(vid_limit,"capture memory limit in megabytes");
+
+/* supported controls */
+static struct v4l2_queryctrl vivi_qctrl[] = {
+	{
+		.id            = V4L2_CID_AUDIO_VOLUME,
+		.name          = "Volume",
+		.minimum       = 0,
+		.maximum       = 65535,
+		.step          = 65535/100,
+		.default_value = 65535,
+		.flags         = 0,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+	},{
+		.id            = V4L2_CID_BRIGHTNESS,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+		.name          = "Brightness",
+		.minimum       = 0,
+		.maximum       = 255,
+		.step          = 1,
+		.default_value = 127,
+		.flags         = 0,
+	}, {
+		.id            = V4L2_CID_CONTRAST,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+		.name          = "Contrast",
+		.minimum       = 0,
+		.maximum       = 255,
+		.step          = 0x1,
+		.default_value = 0x10,
+		.flags         = 0,
+	}, {
+		.id            = V4L2_CID_SATURATION,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+		.name          = "Saturation",
+		.minimum       = 0,
+		.maximum       = 255,
+		.step          = 0x1,
+		.default_value = 127,
+		.flags         = 0,
+	}, {
+		.id            = V4L2_CID_HUE,
+		.type          = V4L2_CTRL_TYPE_INTEGER,
+		.name          = "Hue",
+		.minimum       = -128,
+		.maximum       = 127,
+		.step          = 0x1,
+		.default_value = 0,
+		.flags         = 0,
+	}
+};
+
+static int qctl_regs[ARRAY_SIZE(vivi_qctrl)];
+
+#define dprintk(level,fmt, arg...)			     \
+	do { 						     \
+		if (debug >= (level))			     \
+			printk(KERN_DEBUG "vivi: " fmt , ## arg);    \
+	} while (0)
+
+/* ------------------------------------------------------------------
+	Basic structures
+   ------------------------------------------------------------------*/
+
+struct vivi_fmt {
+	char  *name;
+	u32   fourcc;          /* v4l2 format id */
+	int   depth;
+};
+
+static struct vivi_fmt format = {
+	.name     = "4:2:2, packed, YUYV",
+	.fourcc   = V4L2_PIX_FMT_YUYV,
+	.depth    = 16,
+};
+
+struct sg_to_addr {
+	int pos;
+	struct scatterlist *sg;
+};
+
+/* buffer for one video frame */
+struct vivi_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+
+	struct vivi_fmt        *fmt;
+
+	struct sg_to_addr      *to_addr;
+};
+
+struct vivi_dmaqueue {
+	struct list_head       active;
+	struct list_head       queued;
+	struct timer_list      timeout;
+
+	/* thread for generating video stream*/
+	struct task_struct         *kthread;
+	wait_queue_head_t          wq;
+	/* Counters to control fps rate */
+	int                        frame;
+	int                        ini_jiffies;
+};
+
+static LIST_HEAD(vivi_devlist);
+
+struct vivi_dev {
+	struct list_head           vivi_devlist;
+
+	struct semaphore           lock;
+
+	int                        users;
+
+	/* various device info */
+	unsigned int               resources;
+	struct video_device        video_dev;
+
+	struct vivi_dmaqueue       vidq;
+
+	/* Several counters */
+	int                        h,m,s,us,jiffies;
+	char                       timestr[13];
+};
+
+struct vivi_fh {
+	struct vivi_dev            *dev;
+
+	/* video capture */
+	struct vivi_fmt            *fmt;
+	unsigned int               width,height;
+	struct videobuf_queue      vb_vidq;
+
+	enum v4l2_buf_type         type;
+};
+
+/* ------------------------------------------------------------------
+	DMA and thread functions
+   ------------------------------------------------------------------*/
+
+/* Bars and Colors should match positions */
+
+enum colors {
+	WHITE,
+	AMBAR,
+	CYAN,
+	GREEN,
+	MAGENTA,
+	RED,
+	BLUE
+};
+
+static u8 bars[8][3] = {
+	/* R   G   B */
+	{204,204,204},	/* white */
+	{208,208,  0},  /* ambar */
+	{  0,206,206},  /* cyan */
+	{  0,239,  0},  /* green */
+	{239,  0,239},  /* magenta */
+	{205,  0,  0},  /* red */
+	{  0,  0,255},  /* blue */
+	{  0,  0,  0}
+};
+
+#define TO_Y(r,g,b) (((16829*r +33039*g +6416*b  + 32768)>>16)+16)
+/* RGB to  V(Cr) Color transform */
+#define TO_V(r,g,b) (((28784*r -24103*g -4681*b  + 32768)>>16)+128)
+/* RGB to  U(Cb) Color transform */
+#define TO_U(r,g,b) (((-9714*r -19070*g +28784*b + 32768)>>16)+128)
+
+#define TSTAMP_MIN_Y 24
+#define TSTAMP_MAX_Y TSTAMP_MIN_Y+15
+#define TSTAMP_MIN_X 64
+
+void prep_to_addr(struct sg_to_addr to_addr[],struct videobuf_buffer *vb)
+{
+	int i, pos=0;
+
+	for (i=0;i<vb->dma.nr_pages;i++) {
+		to_addr[i].sg=&vb->dma.sglist[i];
+		to_addr[i].pos=pos;
+		pos += vb->dma.sglist[i].length;
+	}
+}
+
+inline int get_addr_pos(int pos, int pages, struct sg_to_addr to_addr[])
+{
+	int p1=0,p2=pages-1,p3=pages/2;
+
+	/* Sanity test */
+	BUG_ON (pos>=to_addr[p2].pos+to_addr[p2].sg->length);
+
+	while (p1+1<p2) {
+		if (pos < to_addr[p3].pos) {
+			p2=p3;
+		} else {
+			p1=p3;
+		}
+		p3=(p1+p2)/2;
+	}
+	if (pos >= to_addr[p2].pos)
+		p1=p2;
+
+	return (p1);
+}
+
+void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax,
+					int hmax, int line, char *timestr)
+{
+	int  w,i,j,pos=inipos,pgpos,oldpg,y;
+	char *p,*s,*basep;
+	struct page *pg;
+	u8   chr,r,g,b,color;
+
+	/* Get first addr pointed to pixel position */
+	oldpg=get_addr_pos(pos,pages,to_addr);
+	pg=pfn_to_page(to_addr[oldpg].sg->dma_address >> PAGE_SHIFT);
+	basep = kmap_atomic(pg, KM_BOUNCE_READ)+to_addr[oldpg].sg->offset;
+
+	/* We will just duplicate the second pixel at the packet */
+	wmax/=2;
+
+	/* Generate a standard color bar pattern */
+	for (w=0;w<wmax;w++) {
+		r=bars[w*7/wmax][0];
+		g=bars[w*7/wmax][1];
+		b=bars[w*7/wmax][2];
+
+		for (color=0;color<4;color++) {
+			pgpos=get_addr_pos(pos,pages,to_addr);
+			if (pgpos!=oldpg) {
+				pg=pfn_to_page(to_addr[pgpos].sg->dma_address >> PAGE_SHIFT);
+				kunmap_atomic(basep, KM_BOUNCE_READ);
+				basep= kmap_atomic(pg, KM_BOUNCE_READ)+to_addr[pgpos].sg->offset;
+				oldpg=pgpos;
+			}
+			p=basep+pos-to_addr[pgpos].pos;
+
+			switch (color) {
+				case 0:
+				case 2:
+					*p=TO_Y(r,g,b);		/* Luminance */
+					break;
+				case 1:
+					*p=TO_U(r,g,b);		/* Cb */
+					break;
+				case 3:
+					*p=TO_V(r,g,b);		/* Cr */
+					break;
+			}
+			pos++;
+		}
+	}
+
+	/* Checks if it is possible to show timestamp */
+	if (TSTAMP_MAX_Y>=hmax)
+		goto end;
+	if (TSTAMP_MIN_X+strlen(timestr)>=wmax)
+		goto end;
+
+	/* Print stream time */
+	if (line>=TSTAMP_MIN_Y && line<=TSTAMP_MAX_Y) {
+		j=TSTAMP_MIN_X;
+		for (s=timestr;*s;s++) {
+			chr=rom8x16_bits[(*s-0x30)*16+line-TSTAMP_MIN_Y];
+			for (i=0;i<7;i++) {
+				if (chr&1<<(7-i)) { /* Font color*/
+					r=bars[BLUE][0];
+					g=bars[BLUE][1];
+					b=bars[BLUE][2];
+					r=g=b=0;
+					g=198;
+				} else { /* Background color */
+					r=bars[WHITE][0];
+					g=bars[WHITE][1];
+					b=bars[WHITE][2];
+					r=g=b=0;
+				}
+
+				pos=inipos+j*2;
+				for (color=0;color<4;color++) {
+					pgpos=get_addr_pos(pos,pages,to_addr);
+					if (pgpos!=oldpg) {
+						pg=pfn_to_page(to_addr[pgpos].
+								sg->dma_address
+								>> PAGE_SHIFT);
+						kunmap_atomic(basep,
+								KM_BOUNCE_READ);
+						basep= kmap_atomic(pg,
+							KM_BOUNCE_READ)+
+							to_addr[pgpos].sg->offset;
+						oldpg=pgpos;
+					}
+					p=basep+pos-to_addr[pgpos].pos;
+
+					y=TO_Y(r,g,b);
+
+					switch (color) {
+						case 0:
+						case 2:
+							*p=TO_Y(r,g,b);		/* Luminance */
+							break;
+						case 1:
+							*p=TO_U(r,g,b);		/* Cb */
+							break;
+						case 3:
+							*p=TO_V(r,g,b);		/* Cr */
+							break;
+					}
+					pos++;
+				}
+				j++;
+			}
+		}
+	}
+
+
+end:
+	kunmap_atomic(basep, KM_BOUNCE_READ);
+}
+static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
+{
+	int h,pos=0;
+	int hmax  = buf->vb.height;
+	int wmax  = buf->vb.width;
+	struct videobuf_buffer *vb=&buf->vb;
+	struct sg_to_addr *to_addr=buf->to_addr;
+	struct timeval ts;
+
+	/* Test if DMA mapping is ready */
+	if (!vb->dma.sglist[0].dma_address)
+		return;
+
+	prep_to_addr(to_addr,vb);
+
+	/* Check if there is enough memory */
+	BUG_ON(buf->vb.dma.nr_pages << PAGE_SHIFT < (buf->vb.width*buf->vb.height)*2);
+
+	for (h=0;h<hmax;h++) {
+		gen_line(to_addr,pos,vb->dma.nr_pages,wmax,hmax,h,dev->timestr);
+		pos += wmax*2;
+	}
+
+	/* Updates stream time */
+
+	dev->us+=jiffies_to_usecs(jiffies-dev->jiffies);
+	dev->jiffies=jiffies;
+	if (dev->us>=1000000) {
+		dev->us-=1000000;
+		dev->s++;
+		if (dev->s>=60) {
+			dev->s-=60;
+			dev->m++;
+			if (dev->m>60) {
+				dev->m-=60;
+				dev->h++;
+				if (dev->h>24)
+					dev->h-=24;
+			}
+		}
+	}
+	sprintf(dev->timestr,"%02d:%02d:%02d:%03d",
+			dev->h,dev->m,dev->s,(dev->us+500)/1000);
+
+	dprintk(2,"vivifill at %s: Buffer 0x%08lx size= %d\n",dev->timestr,
+			(unsigned long)buf->vb.dma.vmalloc,pos);
+
+	/* Advice that buffer was filled */
+	buf->vb.state = STATE_DONE;
+	buf->vb.field_count++;
+	do_gettimeofday(&ts);
+	buf->vb.ts = ts;
+
+	list_del(&buf->vb.queue);
+	wake_up(&buf->vb.done);
+}
+
+static int restart_video_queue(struct vivi_dmaqueue *dma_q);
+
+static void vivi_thread_tick(struct vivi_dmaqueue  *dma_q)
+{
+	struct vivi_buffer    *buf;
+	struct vivi_dev *dev= container_of(dma_q,struct vivi_dev,vidq);
+
+	int bc;
+
+	/* Announces videobuf that all went ok */
+	for (bc = 0;; bc++) {
+		if (list_empty(&dma_q->active)) {
+			dprintk(1,"No active queue to serve\n");
+			break;
+		}
+
+		buf = list_entry(dma_q->active.next,
+				 struct vivi_buffer, vb.queue);
+
+		/* Nobody is waiting something to be done, just return */
+		if (!waitqueue_active(&buf->vb.done)) {
+			mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT);
+			return;
+		}
+
+		do_gettimeofday(&buf->vb.ts);
+		dprintk(2,"[%p/%d] wakeup\n",buf,buf->vb.i);
+
+		/* Fill buffer */
+		vivi_fillbuff(dev,buf);
+	}
+	if (list_empty(&dma_q->active)) {
+		del_timer(&dma_q->timeout);
+	} else {
+		mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT);
+	}
+	if (bc != 1)
+		dprintk(1,"%s: %d buffers handled (should be 1)\n",__FUNCTION__,bc);
+}
+
+void vivi_sleep(struct vivi_dmaqueue  *dma_q)
+{
+	int timeout;
+	DECLARE_WAITQUEUE(wait, current);
+
+	dprintk(1,"%s dma_q=0x%08lx\n",__FUNCTION__,(unsigned long)dma_q);
+
+	add_wait_queue(&dma_q->wq, &wait);
+	if (!kthread_should_stop()) {
+		dma_q->frame++;
+
+		/* Calculate time to wake up */
+		timeout=dma_q->ini_jiffies+msecs_to_jiffies((dma_q->frame*WAKE_NUMERATOR*1000)/WAKE_DENOMINATOR)-jiffies;
+
+		if (timeout <= 0) {
+			int old=dma_q->frame;
+			dma_q->frame=(jiffies_to_msecs(jiffies-dma_q->ini_jiffies)*WAKE_DENOMINATOR)/(WAKE_NUMERATOR*1000)+1;
+
+			timeout=dma_q->ini_jiffies+msecs_to_jiffies((dma_q->frame*WAKE_NUMERATOR*1000)/WAKE_DENOMINATOR)-jiffies;
+
+			dprintk(1,"underrun, losed %d frames. "
+				  "Now, frame is %d. Waking on %d jiffies\n",
+					dma_q->frame-old,dma_q->frame,timeout);
+		} else
+			dprintk(1,"will sleep for %i jiffies\n",timeout);
+
+		vivi_thread_tick(dma_q);
+
+		schedule_timeout_interruptible (timeout);
+	}
+
+	remove_wait_queue(&dma_q->wq, &wait);
+	try_to_freeze();
+}
+
+int vivi_thread(void *data)
+{
+	struct vivi_dmaqueue  *dma_q=data;
+
+	dprintk(1,"thread started\n");
+
+	for (;;) {
+		vivi_sleep(dma_q);
+
+		if (kthread_should_stop())
+			break;
+	}
+	dprintk(1, "thread: exit\n");
+	return 0;
+}
+
+int vivi_start_thread(struct vivi_dmaqueue  *dma_q)
+{
+	dma_q->frame=0;
+	dma_q->ini_jiffies=jiffies;
+
+	dprintk(1,"%s\n",__FUNCTION__);
+	init_waitqueue_head(&dma_q->wq);
+
+	dma_q->kthread = kthread_run(vivi_thread, dma_q, "vivi");
+
+	if (dma_q->kthread == NULL) {
+		printk(KERN_ERR "vivi: kernel_thread() failed\n");
+		return -EINVAL;
+	}
+	dprintk(1,"returning from %s\n",__FUNCTION__);
+	return 0;
+}
+
+void vivi_stop_thread(struct vivi_dmaqueue  *dma_q)
+{
+	dprintk(1,"%s\n",__FUNCTION__);
+	/* shutdown control thread */
+	if (dma_q->kthread) {
+		kthread_stop(dma_q->kthread);
+		dma_q->kthread=NULL;
+	}
+}
+
+static int restart_video_queue(struct vivi_dmaqueue *dma_q)
+{
+	struct vivi_buffer *buf, *prev;
+	struct list_head *item;
+
+	dprintk(1,"%s dma_q=0x%08lx\n",__FUNCTION__,(unsigned long)dma_q);
+
+	if (!list_empty(&dma_q->active)) {
+		buf = list_entry(dma_q->active.next, struct vivi_buffer, vb.queue);
+		dprintk(2,"restart_queue [%p/%d]: restart dma\n",
+			buf, buf->vb.i);
+
+		dprintk(1,"Restarting video dma\n");
+		vivi_stop_thread(dma_q);
+//		vivi_start_thread(dma_q);
+
+		/* cancel all outstanding capture / vbi requests */
+		list_for_each(item,&dma_q->active) {
+			buf = list_entry(item, struct vivi_buffer, vb.queue);
+
+			list_del(&buf->vb.queue);
+			buf->vb.state = STATE_ERROR;
+			wake_up(&buf->vb.done);
+		}
+		mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT);
+
+		return 0;
+	}
+
+	prev = NULL;
+	for (;;) {
+		if (list_empty(&dma_q->queued))
+			return 0;
+		buf = list_entry(dma_q->queued.next, struct vivi_buffer, vb.queue);
+		if (NULL == prev) {
+			list_del(&buf->vb.queue);
+			list_add_tail(&buf->vb.queue,&dma_q->active);
+
+			dprintk(1,"Restarting video dma\n");
+			vivi_stop_thread(dma_q);
+			vivi_start_thread(dma_q);
+
+			buf->vb.state = STATE_ACTIVE;
+			mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT);
+			dprintk(2,"[%p/%d] restart_queue - first active\n",
+				buf,buf->vb.i);
+
+		} else if (prev->vb.width  == buf->vb.width  &&
+			   prev->vb.height == buf->vb.height &&
+			   prev->fmt       == buf->fmt) {
+			list_del(&buf->vb.queue);
+			list_add_tail(&buf->vb.queue,&dma_q->active);
+			buf->vb.state = STATE_ACTIVE;
+			dprintk(2,"[%p/%d] restart_queue - move to active\n",
+				buf,buf->vb.i);
+		} else {
+			return 0;
+		}
+		prev = buf;
+	}
+}
+
+static void vivi_vid_timeout(unsigned long data)
+{
+	struct vivi_dev      *dev  = (struct vivi_dev*)data;
+	struct vivi_dmaqueue *vidq = &dev->vidq;
+	struct vivi_buffer   *buf;
+
+	while (!list_empty(&vidq->active)) {
+		buf = list_entry(vidq->active.next, struct vivi_buffer, vb.queue);
+		list_del(&buf->vb.queue);
+		buf->vb.state = STATE_ERROR;
+		wake_up(&buf->vb.done);
+		printk("vivi/0: [%p/%d] timeout\n", buf, buf->vb.i);
+	}
+
+	restart_video_queue(vidq);
+}
+
+/* ------------------------------------------------------------------
+	Videobuf operations
+   ------------------------------------------------------------------*/
+static int
+buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
+{
+	struct vivi_fh *fh = vq->priv_data;
+
+	*size = fh->width*fh->height*2;
+
+	if (0 == *count)
+		*count = 32;
+	while (*size * *count > vid_limit * 1024 * 1024)
+		(*count)--;
+	return 0;
+}
+
+void
+free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf)
+{
+	dprintk(1,"%s\n",__FUNCTION__);
+
+	if (in_interrupt())
+		BUG();
+
+	/*FIXME: Maybe a spinlock is required here */
+	kfree(buf->to_addr);
+	buf->to_addr=NULL;
+
+	videobuf_waiton(&buf->vb,0,0);
+	videobuf_dma_unmap(vq, &buf->vb.dma);
+	videobuf_dma_free(&buf->vb.dma);
+	buf->vb.state = STATE_NEEDS_INIT;
+}
+
+#define norm_maxw() 1024
+#define norm_maxh() 768
+static int
+buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
+						enum v4l2_field field)
+{
+	struct vivi_fh     *fh  = vq->priv_data;
+	struct vivi_buffer *buf = container_of(vb,struct vivi_buffer,vb);
+	int rc, init_buffer = 0;
+
+//	dprintk(1,"%s, field=%d\n",__FUNCTION__,field);
+
+	BUG_ON(NULL == fh->fmt);
+	if (fh->width  < 48 || fh->width  > norm_maxw() ||
+	    fh->height < 32 || fh->height > norm_maxh())
+		return -EINVAL;
+	buf->vb.size = fh->width*fh->height*2;
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < buf->vb.size)
+		return -EINVAL;
+
+	if (buf->fmt       != fh->fmt    ||
+	    buf->vb.width  != fh->width  ||
+	    buf->vb.height != fh->height ||
+	buf->vb.field  != field) {
+		buf->fmt       = fh->fmt;
+		buf->vb.width  = fh->width;
+		buf->vb.height = fh->height;
+		buf->vb.field  = field;
+		init_buffer = 1;
+	}
+
+	if (STATE_NEEDS_INIT == buf->vb.state) {
+		if (0 != (rc = videobuf_iolock(vq,&buf->vb,NULL)))
+			goto fail;
+	}
+
+	buf->vb.state = STATE_PREPARED;
+
+	if (NULL == (buf->to_addr = kmalloc(sizeof(*buf->to_addr) * vb->dma.nr_pages,GFP_KERNEL))) {
+		rc=-ENOMEM;
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	free_buffer(vq,buf);
+	return rc;
+}
+
+static void
+buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct vivi_buffer    *buf     = container_of(vb,struct vivi_buffer,vb);
+	struct vivi_fh        *fh      = vq->priv_data;
+	struct vivi_dev       *dev     = fh->dev;
+	struct vivi_dmaqueue  *vidq    = &dev->vidq;
+	struct vivi_buffer    *prev;
+
+	if (!list_empty(&vidq->queued)) {
+		dprintk(1,"adding vb queue=0x%08lx\n",(unsigned long)&buf->vb.queue);
+		list_add_tail(&buf->vb.queue,&vidq->queued);
+		buf->vb.state = STATE_QUEUED;
+		dprintk(2,"[%p/%d] buffer_queue - append to queued\n",
+			buf, buf->vb.i);
+	} else if (list_empty(&vidq->active)) {
+		list_add_tail(&buf->vb.queue,&vidq->active);
+
+		buf->vb.state = STATE_ACTIVE;
+		mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT);
+		dprintk(2,"[%p/%d] buffer_queue - first active\n",
+			buf, buf->vb.i);
+
+		vivi_start_thread(vidq);
+	} else {
+		prev = list_entry(vidq->active.prev, struct vivi_buffer, vb.queue);
+		if (prev->vb.width  == buf->vb.width  &&
+		    prev->vb.height == buf->vb.height &&
+		    prev->fmt       == buf->fmt) {
+			list_add_tail(&buf->vb.queue,&vidq->active);
+			buf->vb.state = STATE_ACTIVE;
+			dprintk(2,"[%p/%d] buffer_queue - append to active\n",
+				buf, buf->vb.i);
+
+		} else {
+			list_add_tail(&buf->vb.queue,&vidq->queued);
+			buf->vb.state = STATE_QUEUED;
+			dprintk(2,"[%p/%d] buffer_queue - first queued\n",
+				buf, buf->vb.i);
+		}
+	}
+}
+
+static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct vivi_buffer   *buf  = container_of(vb,struct vivi_buffer,vb);
+	struct vivi_fh       *fh   = vq->priv_data;
+	struct vivi_dev      *dev  = (struct vivi_dev*)fh->dev;
+	struct vivi_dmaqueue *vidq = &dev->vidq;
+
+	dprintk(1,"%s\n",__FUNCTION__);
+
+	vivi_stop_thread(vidq);
+
+	free_buffer(vq,buf);
+}
+
+int vivi_map_sg (void *dev, struct scatterlist *sg, int nents,
+	   int direction)
+{
+	int i;
+
+	dprintk(1,"%s, number of pages=%d\n",__FUNCTION__,nents);
+	BUG_ON(direction == DMA_NONE);
+
+	for (i = 0; i < nents; i++ ) {
+		BUG_ON(!sg[i].page);
+
+		sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
+	}
+
+	return nents;
+}
+
+int vivi_unmap_sg(void *dev,struct scatterlist *sglist,int nr_pages,
+					int direction)
+{
+	dprintk(1,"%s\n",__FUNCTION__);
+	return 0;
+}
+
+int vivi_dma_sync_sg(void *dev,struct scatterlist *sglist,int nr_pages,
+					int direction)
+{
+//	dprintk(1,"%s\n",__FUNCTION__);
+
+//	flush_write_buffers();
+	return 0;
+}
+
+static struct videobuf_queue_ops vivi_video_qops = {
+	.buf_setup      = buffer_setup,
+	.buf_prepare    = buffer_prepare,
+	.buf_queue      = buffer_queue,
+	.buf_release    = buffer_release,
+
+	/* Non-pci handling routines */
+	.vb_map_sg      = vivi_map_sg,
+	.vb_dma_sync_sg = vivi_dma_sync_sg,
+	.vb_unmap_sg    = vivi_unmap_sg,
+};
+
+/* ------------------------------------------------------------------
+	IOCTL handling
+   ------------------------------------------------------------------*/
+
+static int vivi_try_fmt(struct vivi_dev *dev, struct vivi_fh *fh,
+			struct v4l2_format *f)
+{
+	struct vivi_fmt *fmt;
+	enum v4l2_field field;
+	unsigned int maxw, maxh;
+
+	if (format.fourcc != f->fmt.pix.pixelformat) {
+		dprintk(1,"Fourcc format invalid.\n");
+		return -EINVAL;
+	}
+	fmt=&format;
+
+	field = f->fmt.pix.field;
+
+	if (field == V4L2_FIELD_ANY) {
+//		field=V4L2_FIELD_INTERLACED;
+		field=V4L2_FIELD_SEQ_TB;
+	} else if (V4L2_FIELD_INTERLACED != field) {
+		dprintk(1,"Field type invalid.\n");
+		return -EINVAL;
+	}
+
+	maxw  = norm_maxw();
+	maxh  = norm_maxh();
+
+	f->fmt.pix.field = field;
+	if (f->fmt.pix.height < 32)
+		f->fmt.pix.height = 32;
+	if (f->fmt.pix.height > maxh)
+		f->fmt.pix.height = maxh;
+	if (f->fmt.pix.width < 48)
+		f->fmt.pix.width = 48;
+	if (f->fmt.pix.width > maxw)
+		f->fmt.pix.width = maxw;
+	f->fmt.pix.width &= ~0x03;
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * fmt->depth) >> 3;
+	f->fmt.pix.sizeimage =
+		f->fmt.pix.height * f->fmt.pix.bytesperline;
+
+	return 0;
+}
+
+static int res_get(struct vivi_dev *dev, struct vivi_fh *fh)
+{
+	/* is it free? */
+	down(&dev->lock);
+	if (dev->resources) {
+		/* no, someone else uses it */
+		up(&dev->lock);
+		return 0;
+	}
+	/* it's free, grab it */
+	dev->resources =1;
+	dprintk(1,"res: get\n");
+	up(&dev->lock);
+	return 1;
+}
+
+static inline int res_locked(struct vivi_dev *dev)
+{
+	return (dev->resources);
+}
+
+static void res_free(struct vivi_dev *dev, struct vivi_fh *fh)
+{
+	down(&dev->lock);
+	dev->resources = 0;
+	dprintk(1,"res: put\n");
+	up(&dev->lock);
+}
+
+static int vivi_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg)
+{
+	struct vivi_fh  *fh     = file->private_data;
+	struct vivi_dev *dev    = fh->dev;
+	int ret=0;
+
+	if (debug) {
+		if (_IOC_DIR(cmd) & _IOC_WRITE)
+			v4l_printk_ioctl_arg("vivi(w)",cmd, arg);
+		else if (!_IOC_DIR(cmd) & _IOC_READ) {
+			v4l_print_ioctl("vivi", cmd);
+		}
+	}
+
+	switch(cmd) {
+	/* --- capabilities ------------------------------------------ */
+	case VIDIOC_QUERYCAP:
+	{
+		struct v4l2_capability *cap = (struct v4l2_capability*)arg;
+
+		memset(cap, 0, sizeof(*cap));
+
+		strcpy(cap->driver, "vivi");
+		strcpy(cap->card, "vivi");
+		cap->version = VIVI_VERSION;
+		cap->capabilities =
+					V4L2_CAP_VIDEO_CAPTURE |
+					V4L2_CAP_STREAMING     |
+					V4L2_CAP_READWRITE;
+		break;
+	}
+	/* --- capture ioctls ---------------------------------------- */
+	case VIDIOC_ENUM_FMT:
+	{
+		struct v4l2_fmtdesc *f = arg;
+		enum v4l2_buf_type type;
+		unsigned int index;
+
+		index = f->index;
+		type  = f->type;
+
+		if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			ret=-EINVAL;
+			break;
+		}
+
+		switch (type) {
+		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+			if (index > 0){
+				ret=-EINVAL;
+				break;
+			}
+			memset(f,0,sizeof(*f));
+
+			f->index = index;
+			f->type  = type;
+			strlcpy(f->description,format.name,sizeof(f->description));
+			f->pixelformat = format.fourcc;
+			break;
+		default:
+			ret=-EINVAL;
+		}
+		break;
+	}
+	case VIDIOC_G_FMT:
+	{
+		struct v4l2_format *f = (struct v4l2_format *)arg;
+
+		if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			ret=-EINVAL;
+			break;
+		}
+
+		memset(&f->fmt.pix,0,sizeof(f->fmt.pix));
+		f->fmt.pix.width        = fh->width;
+		f->fmt.pix.height       = fh->height;
+		f->fmt.pix.field        = fh->vb_vidq.field;
+		f->fmt.pix.pixelformat  = fh->fmt->fourcc;
+		f->fmt.pix.bytesperline =
+			(f->fmt.pix.width * fh->fmt->depth) >> 3;
+		f->fmt.pix.sizeimage =
+			f->fmt.pix.height * f->fmt.pix.bytesperline;
+		break;
+	}
+	case VIDIOC_S_FMT:
+	{
+		struct v4l2_format *f = arg;
+
+		if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			dprintk(1,"Only capture supported.\n");
+			ret=-EINVAL;
+			break;
+		}
+
+		ret = vivi_try_fmt(dev,fh,f);
+		if (ret < 0)
+			break;
+
+		fh->fmt           = &format;
+		fh->width         = f->fmt.pix.width;
+		fh->height        = f->fmt.pix.height;
+		fh->vb_vidq.field = f->fmt.pix.field;
+		fh->type          = f->type;
+
+		break;
+	}
+	case VIDIOC_TRY_FMT:
+	{
+		struct v4l2_format *f = arg;
+		if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			ret=-EINVAL;
+			break;
+		}
+
+		ret=vivi_try_fmt(dev,fh,f);
+		break;
+	}
+	case VIDIOC_REQBUFS:
+		if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			ret=-EINVAL;
+			break;
+		}
+		ret=videobuf_reqbufs(&fh->vb_vidq, arg);
+		break;
+	case VIDIOC_QUERYBUF:
+		if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			ret=-EINVAL;
+			break;
+		}
+		ret=videobuf_querybuf(&fh->vb_vidq, arg);
+		break;
+	case VIDIOC_QBUF:
+		if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			ret=-EINVAL;
+			break;
+		}
+		ret=videobuf_qbuf(&fh->vb_vidq, arg);
+		break;
+	case VIDIOC_DQBUF:
+		if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			ret=-EINVAL;
+			break;
+		}
+		ret=videobuf_dqbuf(&fh->vb_vidq, arg,
+					file->f_flags & O_NONBLOCK);
+		break;
+#ifdef HAVE_V4L1
+	/* --- streaming capture ------------------------------------- */
+	case VIDIOCGMBUF:
+	{
+		struct video_mbuf *mbuf = arg;
+		struct videobuf_queue *q=&fh->vb_vidq;
+		struct v4l2_requestbuffers req;
+		unsigned int i;
+
+		memset(&req,0,sizeof(req));
+		req.type   = q->type;
+		req.count  = 8;
+		req.memory = V4L2_MEMORY_MMAP;
+		ret = videobuf_reqbufs(q,&req);
+		if (ret < 0)
+			break;
+		memset(mbuf,0,sizeof(*mbuf));
+		mbuf->frames = req.count;
+		mbuf->size   = 0;
+		for (i = 0; i < mbuf->frames; i++) {
+			mbuf->offsets[i]  = q->bufs[i]->boff;
+			mbuf->size       += q->bufs[i]->bsize;
+		}
+		break;
+	}
+#endif
+	case VIDIOC_STREAMON:
+	{
+		if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+			return -EINVAL;
+		if (!res_get(dev,fh))
+			return -EBUSY;
+		ret=videobuf_streamon(&fh->vb_vidq);
+		break;
+	}
+	case VIDIOC_STREAMOFF:
+	{
+		if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+			ret=-EINVAL;
+			break;
+		}
+		ret = videobuf_streamoff(&fh->vb_vidq);
+		if (ret < 0)
+			break;
+		res_free(dev,fh);
+		break;
+	}
+	/* ---------- tv norms ---------- */
+	case VIDIOC_ENUMSTD:
+	{
+		struct v4l2_standard *e = arg;
+
+		if (e->index>0) {
+			ret=-EINVAL;
+			break;
+		}
+		ret = v4l2_video_std_construct(e, V4L2_STD_NTSC_M, "NTSC-M");
+
+		/* Allows vivi to use different fps from video std */
+		e->frameperiod.numerator = WAKE_NUMERATOR;
+		e->frameperiod.denominator = WAKE_DENOMINATOR;
+
+		break;
+	}
+	case VIDIOC_G_STD:
+	{
+		v4l2_std_id *id = arg;
+
+		*id = V4L2_STD_NTSC_M;
+		break;
+	}
+	case VIDIOC_S_STD:
+	{
+		break;
+	}
+	/* ------ input switching ---------- */
+	case VIDIOC_ENUMINPUT:
+	{ /* only one input in this sample driver */
+		struct v4l2_input *inp = arg;
+
+		if (inp->index != 0) {
+			ret=-EINVAL;
+			break;
+		}
+		memset(inp, 0, sizeof(*inp));
+
+		inp->index = 0;
+		inp->type = V4L2_INPUT_TYPE_CAMERA;
+		inp->std = V4L2_STD_NTSC_M;
+		strcpy(inp->name,"Camera");
+		break;
+	}
+	case VIDIOC_G_INPUT:
+	{
+		unsigned int *i = arg;
+
+		*i = 0;
+		break;
+	}
+	case VIDIOC_S_INPUT:
+	{
+		unsigned int *i = arg;
+
+		if (*i > 0)
+			ret=-EINVAL;
+		break;
+	}
+
+	/* --- controls ---------------------------------------------- */
+	case VIDIOC_QUERYCTRL:
+	{
+		struct v4l2_queryctrl *qc = arg;
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++)
+			if (qc->id && qc->id == vivi_qctrl[i].id) {
+				memcpy(qc, &(vivi_qctrl[i]),
+					sizeof(*qc));
+				break;
+			}
+
+		ret=-EINVAL;
+		break;
+	}
+	case VIDIOC_G_CTRL:
+	{
+		struct v4l2_control *ctrl = arg;
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++)
+			if (ctrl->id == vivi_qctrl[i].id) {
+				ctrl->value=qctl_regs[i];
+				break;
+			}
+
+		ret=-EINVAL;
+		break;
+	}
+	case VIDIOC_S_CTRL:
+	{
+		struct v4l2_control *ctrl = arg;
+		int i;
+		for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++)
+			if (ctrl->id == vivi_qctrl[i].id) {
+				if (ctrl->value <
+					vivi_qctrl[i].minimum
+					|| ctrl->value >
+					vivi_qctrl[i].maximum) {
+						ret=-ERANGE;
+						break;
+					}
+				qctl_regs[i]=ctrl->value;
+				break;
+			}
+		ret=-EINVAL;
+		break;
+	}
+	default:
+		ret=v4l_compat_translate_ioctl(inode,file,cmd,arg,vivi_do_ioctl);
+	}
+
+	if (debug) {
+		if (ret<0) {
+			v4l_print_ioctl("vivi(err)", cmd);
+			dprintk(1,"errcode=%d\n",ret);
+		} else if (_IOC_DIR(cmd) & _IOC_READ)
+			v4l_printk_ioctl_arg("vivi(r)",cmd, arg);
+	}
+
+	return ret;
+}
+
+static int vivi_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	return video_usercopy(inode, file, cmd, arg, vivi_do_ioctl);
+}
+
+/* ------------------------------------------------------------------
+	File operations for the device
+   ------------------------------------------------------------------*/
+
+#define line_buf_size(norm) (norm_maxw(norm)*(format.depth+7)/8)
+
+static int vivi_open(struct inode *inode, struct file *file)
+{
+	int minor = iminor(inode);
+	struct vivi_dev *h,*dev = NULL;
+	struct vivi_fh *fh;
+	struct list_head *list;
+	enum v4l2_buf_type type = 0;
+	int i;
+
+	printk(KERN_DEBUG "vivi: open called (minor=%d)\n",minor);
+
+	list_for_each(list,&vivi_devlist) {
+		h = list_entry(list, struct vivi_dev, vivi_devlist);
+		if (h->video_dev.minor == minor) {
+			dev  = h;
+			type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		}
+	}
+	if (NULL == dev)
+		return -ENODEV;
+
+
+	/* If more than one user, mutex should be added */
+	dev->users++;
+
+	dprintk(1,"open minor=%d type=%s users=%d\n",
+				minor,v4l2_type_names[type],dev->users);
+
+	/* allocate + initialize per filehandle data */
+	fh = kzalloc(sizeof(*fh),GFP_KERNEL);
+	if (NULL == fh) {
+		dev->users--;
+		return -ENOMEM;
+	}
+
+	file->private_data = fh;
+	fh->dev      = dev;
+	fh->type     = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	fh->fmt      = &format;
+	fh->width    = 640;
+	fh->height   = 480;
+
+	/* Put all controls at a sane state */
+	for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++)
+		qctl_regs[i] =vivi_qctrl[i].default_value;
+
+	dprintk(1,"Open: fh=0x%08lx, dev=0x%08lx, dev->vidq=0x%08lx\n",
+		(unsigned long)fh,(unsigned long)dev,(unsigned long)&dev->vidq);
+	dprintk(1,"Open: list_empty queued=%d\n",list_empty(&dev->vidq.queued));
+	dprintk(1,"Open: list_empty active=%d\n",list_empty(&dev->vidq.active));
+
+	/* Resets frame counters */
+	dev->h=0;
+	dev->m=0;
+	dev->s=0;
+	dev->us=0;
+	dev->jiffies=jiffies;
+	sprintf(dev->timestr,"%02d:%02d:%02d:%03d",
+			dev->h,dev->m,dev->s,(dev->us+500)/1000);
+
+	videobuf_queue_init(&fh->vb_vidq, &vivi_video_qops,
+			NULL, NULL,
+			fh->type,
+			V4L2_FIELD_INTERLACED,
+			sizeof(struct vivi_buffer),fh);
+
+	return 0;
+}
+
+static ssize_t
+vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+	struct vivi_fh *fh = file->private_data;
+
+	if (fh->type==V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		if (res_locked(fh->dev))
+			return -EBUSY;
+		return videobuf_read_one(&fh->vb_vidq, data, count, ppos,
+					file->f_flags & O_NONBLOCK);
+	}
+	return 0;
+}
+
+static unsigned int
+vivi_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct vivi_fh *fh = file->private_data;
+	struct vivi_buffer *buf;
+
+	dprintk(1,"%s\n",__FUNCTION__);
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
+		return POLLERR;
+
+	if (res_get(fh->dev,fh)) {
+		dprintk(1,"poll: mmap interface\n");
+		/* streaming capture */
+		if (list_empty(&fh->vb_vidq.stream))
+			return POLLERR;
+		buf = list_entry(fh->vb_vidq.stream.next,struct vivi_buffer,vb.stream);
+	} else {
+		dprintk(1,"poll: read() interface\n");
+		/* read() capture */
+		buf = (struct vivi_buffer*)fh->vb_vidq.read_buf;
+		if (NULL == buf)
+			return POLLERR;
+	}
+	poll_wait(file, &buf->vb.done, wait);
+	if (buf->vb.state == STATE_DONE ||
+	    buf->vb.state == STATE_ERROR)
+		return POLLIN|POLLRDNORM;
+	return 0;
+}
+
+static int vivi_release(struct inode *inode, struct file *file)
+{
+	struct vivi_fh  *fh     = file->private_data;
+	struct vivi_dev *dev    = fh->dev;
+	struct vivi_dmaqueue *vidq = &dev->vidq;
+
+	int minor = iminor(inode);
+
+	vivi_stop_thread(vidq);
+	videobuf_mmap_free(&fh->vb_vidq);
+
+	kfree (fh);
+
+	dev->users--;
+
+	printk(KERN_DEBUG "vivi: close called (minor=%d, users=%d)\n",minor,dev->users);
+
+	return 0;
+}
+
+static int
+vivi_mmap(struct file *file, struct vm_area_struct * vma)
+{
+	struct vivi_fh *fh = file->private_data;
+	int ret;
+
+	dprintk (1,"mmap called, vma=0x%08lx\n",(unsigned long)vma);
+
+	ret=videobuf_mmap_mapper(&fh->vb_vidq, vma);
+
+	dprintk (1,"vma start=0x%08lx, size=%ld, ret=%d\n",
+		(unsigned long)vma->vm_start,
+		(unsigned long)vma->vm_end-(unsigned long)vma->vm_start,
+		ret);
+
+	return ret;
+}
+
+static struct file_operations vivi_fops = {
+	.owner		= THIS_MODULE,
+	.open           = vivi_open,
+	.release        = vivi_release,
+	.read           = vivi_read,
+	.poll		= vivi_poll,
+	.ioctl          = vivi_ioctl,
+	.mmap		= vivi_mmap,
+	.llseek         = no_llseek,
+};
+
+static struct video_device vivi = {
+	.name		= "VTM Virtual Video Capture Board",
+	.type		= VID_TYPE_CAPTURE,
+	.hardware	= 0,
+	.fops           = &vivi_fops,
+	.minor		= -1,
+//	.release	= video_device_release,
+};
+/* ------------------------------------------------------------------
+	Initialization and module stuff
+   ------------------------------------------------------------------*/
+
+static int __init vivi_init(void)
+{
+	int ret;
+	struct vivi_dev *dev;
+
+	dev = kzalloc(sizeof(*dev),GFP_KERNEL);
+	if (NULL == dev)
+		return -ENOMEM;
+	list_add_tail(&dev->vivi_devlist,&vivi_devlist);
+
+	/* init video dma queues */
+	INIT_LIST_HEAD(&dev->vidq.active);
+	INIT_LIST_HEAD(&dev->vidq.queued);
+
+	/* initialize locks */
+	init_MUTEX(&dev->lock);
+
+	dev->vidq.timeout.function = vivi_vid_timeout;
+	dev->vidq.timeout.data     = (unsigned long)dev;
+	init_timer(&dev->vidq.timeout);
+
+	ret = video_register_device(&vivi, VFL_TYPE_GRABBER, video_nr);
+	printk(KERN_INFO "Video Technology Magazine Virtual Video Capture Board (Load status: %d)\n", ret);
+	return ret;
+}
+
+static void __exit vivi_exit(void)
+{
+	struct vivi_dev *h;
+	struct list_head *list;
+
+	list_for_each(list,&vivi_devlist) {
+		h = list_entry(list, struct vivi_dev, vivi_devlist);
+		kfree (h);
+	}
+	video_unregister_device(&vivi);
+}
+
+module_init(vivi_init);
+module_exit(vivi_exit);
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 4cd579967487..40b205b91481 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * vpx3220a, vpx3216b & vpx3214c video decoder driver version 0.0.1
  *
  * Copyright (C) 2001 Laurent Pinchart <lpinchart@freegates.be>
@@ -176,8 +176,8 @@ vpx3220_write_block (struct i2c_client *client,
 
 static int
 vpx3220_write_fp_block (struct i2c_client *client,
-		        const u16         *data,
-		        unsigned int       len)
+			const u16         *data,
+			unsigned int       len)
 {
 	u8 reg;
 	int ret = 0;
@@ -316,7 +316,7 @@ vpx3220_command (struct i2c_client *client,
 		vpx3220_write_fp_block(client, init_fp,
 				       sizeof(init_fp) >> 1);
 		switch (decoder->norm) {
-			
+
 		case VIDEO_MODE_NTSC:
 			vpx3220_write_fp_block(client, init_ntsc,
 					       sizeof(init_ntsc) >> 1);
@@ -324,7 +324,7 @@ vpx3220_command (struct i2c_client *client,
 
 		case VIDEO_MODE_PAL:
 			vpx3220_write_fp_block(client, init_pal,
-				       	       sizeof(init_pal) >> 1);
+					       sizeof(init_pal) >> 1);
 			break;
 		case VIDEO_MODE_SECAM:
 			vpx3220_write_fp_block(client, init_secam,
@@ -332,10 +332,10 @@ vpx3220_command (struct i2c_client *client,
 			break;
 		default:
 			vpx3220_write_fp_block(client, init_pal,
-				       	       sizeof(init_pal) >> 1);
+					       sizeof(init_pal) >> 1);
 			break;
 		}
-	}		
+	}
 		break;
 
 	case DECODER_DUMP:
@@ -411,7 +411,7 @@ vpx3220_command (struct i2c_client *client,
 
 		/* Here we back up the input selection because it gets
 		   overwritten when we fill the registers with the
-                   choosen video norm */
+		   choosen video norm */
 		temp_input = vpx3220_fp_read(client, 0xf2);
 
 		dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n",
@@ -578,7 +578,7 @@ static unsigned short normal_i2c[] =
 };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,
@@ -661,7 +661,7 @@ vpx3220_detect_client (struct i2c_adapter *adapter,
 			break;
 		default:
 			dprintk(1,
-				KERN_INFO 
+				KERN_INFO
 				"%s: Wrong part number (0x%04x)\n",
 				__func__, pn);
 			kfree(client);
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index b7b0afffd214..80ef8a1b8f63 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -26,7 +26,7 @@
 	Does any other model using the w9966 interface chip exist ?
 
 	Todo:
-	
+
 	*Add a working EPP mode, since DMA ECP read isn't implemented
 	in the parport drivers. (That's why it's so sloow)
 
@@ -47,9 +47,9 @@
 	*Probably some bugs that I don't know of
 
 	Please support me by sending feedback!
-	
+
 	Changes:
-	
+
 	Alan Cox:	Removed RGB mode for kernel merge, added THIS_MODULE
 			and owner support for newer module locks
 */
@@ -204,7 +204,7 @@ static struct video_device w9966_template = {
  */
 
 
-// Set camera phase flags, so we know what to uninit when terminating 
+// Set camera phase flags, so we know what to uninit when terminating
 static inline void w9966_setState(struct w9966_dev* cam, int mask, int val)
 {
 	cam->dev_state = (cam->dev_state & ~mask) ^ val;
@@ -233,7 +233,7 @@ static inline void w9966_pdev_release(struct w9966_dev* cam)
 	parport_release(cam->pdev);
 	w9966_setState(cam, W9966_STATE_CLAIMED, 0);
 }
- 
+
 // Read register from W9966 interface-chip
 // Expects a claimed pdev
 // -1 on error, else register data (byte)
@@ -242,7 +242,7 @@ static int w9966_rReg(struct w9966_dev* cam, int reg)
 	// ECP, read, regtransfer, REG, REG, REG, REG, REG
 	const unsigned char addr = 0x80 | (reg & 0x1f);
 	unsigned char val;
-	
+
 	if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
 		return -1;
 	if (parport_write(cam->pport, &addr, 1) != 1)
@@ -263,7 +263,7 @@ static int w9966_wReg(struct w9966_dev* cam, int reg, int data)
 	// ECP, write, regtransfer, REG, REG, REG, REG, REG
 	const unsigned char addr = 0xc0 | (reg & 0x1f);
 	const unsigned char val = data;
-	
+
 	if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
 		return -1;
 	if (parport_write(cam->pport, &addr, 1) != 1)
@@ -284,7 +284,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port)
 {
 	if (cam->dev_state != 0)
 		return -1;
-	
+
 	cam->pport = port;
 	cam->brightness = 128;
 	cam->contrast = 64;
@@ -302,7 +302,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port)
 			cam->ppmode = IEEE1284_MODE_EPP;
 		else
 			cam->ppmode = IEEE1284_MODE_ECP;
-		break;	
+		break;
 	case 1:		// hw- or sw-ecp
 		cam->ppmode = IEEE1284_MODE_ECP;
 		break;
@@ -310,7 +310,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port)
 		cam->ppmode = IEEE1284_MODE_EPP;
 	break;
 	}
-	
+
 // Tell the parport driver that we exists
 	cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL);
 	if (cam->pdev == NULL) {
@@ -320,7 +320,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port)
 	w9966_setState(cam, W9966_STATE_PDEV, W9966_STATE_PDEV);
 
 	w9966_pdev_claim(cam);
-	
+
 // Setup a default capture mode
 	if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) {
 		DPRINTF("w9966_setup() failed.\n");
@@ -333,11 +333,11 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port)
 	memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device));
 	cam->vdev.priv = cam;
 
-	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)		 
+	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)
 		return -1;
-	
+
 	w9966_setState(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
-	
+
 	// All ok
 	printk(
 		"w9966cf: Found and initialized a webcam on %s.\n",
@@ -391,7 +391,7 @@ static int w9966_findlen(int near, int size, int maxlen)
 		// Only continue as long as we keep getting better values
 		if (err > besterr)
 			break;
-		
+
 		besterr = err;
 		bestlen = len;
 	}
@@ -399,7 +399,7 @@ static int w9966_findlen(int near, int size, int maxlen)
 	return bestlen;
 }
 
-// Modify capture window (if necessary) 
+// Modify capture window (if necessary)
 // and calculate downscaling
 // Return -1 on error
 static int w9966_calcscale(int size, int min, int max, int* beg, int* end, unsigned char* factor)
@@ -407,7 +407,7 @@ static int w9966_calcscale(int size, int min, int max, int* beg, int* end, unsig
 	int maxlen = max - min;
 	int len = *end - *beg + 1;
 	int newlen = w9966_findlen(len, size, maxlen);
-	int err = newlen - len; 
+	int err = newlen - len;
 
 	// Check for bad format
 	if (newlen > maxlen || newlen < size)
@@ -452,8 +452,8 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in
 		0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0
 	};
-	
-	
+
+
 	if (w*h*2 > W9966_SRAMSIZE)
 	{
 		DPRINTF("capture window exceeds SRAM size!.\n");
@@ -469,9 +469,9 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in
 	cam->width = w;
 	cam->height = h;
 
-	enh_s = 0;	
+	enh_s = 0;
 	enh_e = w*h*2;
-	
+
 // Modify capture window if necessary and calculate downscaling
 	if (
 		w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 ||
@@ -482,14 +482,14 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in
 		"%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n",
 		w, h, x1, x2, y1, y2, scale_x&~0x80, scale_y&~0x80
 	);
-	
+
 // Setup registers
 	regs[0x00] = 0x00;			// Set normal operation
 	regs[0x01] = 0x18;			// Capture mode
 	regs[0x02] = scale_y;			// V-scaling
 	regs[0x03] = scale_x;			// H-scaling
-	
-	// Capture window	
+
+	// Capture window
 	regs[0x04] = (x1 & 0x0ff);		// X-start (8 low bits)
 	regs[0x05] = (x1 & 0x300)>>8;		// X-start (2 high bits)
 	regs[0x06] = (y1 & 0x0ff);		// Y-start (8 low bits)
@@ -499,7 +499,7 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in
 	regs[0x0a] = (y2 & 0x0ff);		// Y-end (8 low bits)
 
 	regs[0x0c] = W9966_SRAMID;		// SRAM-banks (1x 128kb)
-	
+
 	// Enhancement layer
 	regs[0x0d] = (enh_s& 0x000ff);		// Enh. start (0-7)
 	regs[0x0e] = (enh_s& 0x0ff00)>>8;	// Enh. start (8-15)
@@ -515,7 +515,7 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in
 	regs[0x19] = 0xff;			// I/O port direction control
 	regs[0x1a] = 0xff;			// I/O port data register
 	regs[0x1b] = 0x10;			// ???
-	
+
 	// SAA7111 chip settings
 	saa7111_regs[0x0a] = cam->brightness;
 	saa7111_regs[0x0b] = cam->contrast;
@@ -551,7 +551,7 @@ static inline void w9966_i2c_setsda(struct w9966_dev* cam, int state)
 		cam->i2c_state |= W9966_I2C_W_DATA;
 	else
 		cam->i2c_state &= ~W9966_I2C_W_DATA;
-	
+
 	w9966_wReg(cam, 0x18, cam->i2c_state);
 	udelay(5);
 }
@@ -577,7 +577,7 @@ static inline int w9966_i2c_setscl(struct w9966_dev* cam, int state)
 
 	w9966_wReg(cam, 0x18, cam->i2c_state);
 	udelay(5);
-	
+
 	// we go to high, we also expect the peripheral to ack.
 	if (state) {
 		timeout = jiffies + 100;
@@ -607,16 +607,16 @@ static int w9966_i2c_wbyte(struct w9966_dev* cam, int data)
 		w9966_i2c_setsda(cam, (data >> i) & 0x01);
 
 		if (w9966_i2c_setscl(cam, 1) == -1)
-			return -1;			
+			return -1;
 		w9966_i2c_setscl(cam, 0);
 	}
 
 	w9966_i2c_setsda(cam, 1);
-	
+
 	if (w9966_i2c_setscl(cam, 1) == -1)
 		return -1;
 	w9966_i2c_setscl(cam, 0);
-	
+
 	return 0;
 }
 
@@ -626,8 +626,8 @@ static int w9966_i2c_wbyte(struct w9966_dev* cam, int data)
 static int w9966_i2c_rbyte(struct w9966_dev* cam)
 {
 	unsigned char data = 0x00;
-	int i;	
-	
+	int i;
+
 	w9966_i2c_setsda(cam, 1);
 
 	for (i = 0; i < 8; i++)
@@ -637,7 +637,7 @@ static int w9966_i2c_rbyte(struct w9966_dev* cam)
 		data = data << 1;
 		if (w9966_i2c_getsda(cam))
 			data |= 0x01;
-		
+
 		w9966_i2c_setscl(cam, 0);
 	}
 	return data;
@@ -673,11 +673,11 @@ static int w9966_rReg_i2c(struct w9966_dev* cam, int reg)
 		return -1;
 
 	w9966_i2c_setsda(cam, 0);
-	
+
 	if (w9966_i2c_setscl(cam, 1) == -1)
 		return -1;
 	w9966_i2c_setsda(cam, 1);
-	
+
 	return data;
 }
 #endif
@@ -699,7 +699,7 @@ static int w9966_wReg_i2c(struct w9966_dev* cam, int reg, int data)
 	w9966_i2c_setsda(cam, 0);
 	if (w9966_i2c_setscl(cam, 1) == -1)
 		return -1;
-		
+
 	w9966_i2c_setsda(cam, 1);
 
 	return 0;
@@ -714,7 +714,7 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file,
 {
 	struct video_device *vdev = video_devdata(file);
 	struct w9966_dev *cam = vdev->priv;
-	
+
 	switch(cmd)
 	{
 	case VIDIOCGCAP:
@@ -790,14 +790,14 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file,
 		struct video_picture *vpic = arg;
 		if (vpic->depth != 16 || vpic->palette != VIDEO_PALETTE_YUV422)
 			return -EINVAL;
-			
+
 		cam->brightness = vpic->brightness >> 8;
 		cam->hue = (vpic->hue >> 8) - 128;
 		cam->color = vpic->colour >> 9;
 		cam->contrast = vpic->contrast >> 9;
 
 		w9966_pdev_claim(cam);
-		
+
 		if (
 			w9966_wReg_i2c(cam, 0x0a, cam->brightness) == -1 ||
 			w9966_wReg_i2c(cam, 0x0b, cam->contrast) == -1 ||
@@ -807,7 +807,7 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file,
 			w9966_pdev_release(cam);
 			return -EIO;
 		}
-		
+
 		w9966_pdev_release(cam);
 		return 0;
 	}
@@ -815,13 +815,13 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file,
 	{
 		int ret;
 		struct video_window *vwin = arg;
-		
+
 		if (vwin->flags != 0)
 			return -EINVAL;
 		if (vwin->clipcount != 0)
 			return -EINVAL;
 		if (vwin->width < 2 || vwin->width > W9966_WND_MAX_W)
-			return -EINVAL;		
+			return -EINVAL;
 		if (vwin->height < 1 || vwin->height > W9966_WND_MAX_H)
 			return -EINVAL;
 
@@ -829,12 +829,12 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file,
 		w9966_pdev_claim(cam);
 		ret = w9966_setup(cam, 0, 0, 1023, 1023, vwin->width, vwin->height);
 		w9966_pdev_release(cam);
-		
+
 		if (ret != 0) {
 			DPRINTF("VIDIOCSWIN: w9966_setup() failed.\n");
 			return -EIO;
 		}
-		
+
 		return 0;
 	}
 	case VIDIOCGWIN:
@@ -846,7 +846,7 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file,
 		return 0;
 	}
 	// Unimplemented
-	case VIDIOCCAPTURE:	
+	case VIDIOCCAPTURE:
 	case VIDIOCGFBUF:
 	case VIDIOCSFBUF:
 	case VIDIOCKEY:
@@ -877,17 +877,17 @@ static ssize_t w9966_v4l_read(struct file *file, char  __user *buf,
 	unsigned char __user *dest = (unsigned char __user *)buf;
 	unsigned long dleft = count;
 	unsigned char *tbuf;
-	
+
 	// Why would anyone want more than this??
 	if (count > cam->width * cam->height * 2)
 		return -EINVAL;
-	
+
 	w9966_pdev_claim(cam);
 	w9966_wReg(cam, 0x00, 0x02);	// Reset ECP-FIFO buffer
 	w9966_wReg(cam, 0x00, 0x00);	// Return to normal operation
 	w9966_wReg(cam, 0x01, 0x98);	// Enable capture
 
-	// write special capture-addr and negotiate into data transfer	
+	// write special capture-addr and negotiate into data transfer
 	if (
 		(parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0	)||
 		(parport_write(cam->pport, &addr, 1) != 1						)||
@@ -906,7 +906,7 @@ static ssize_t w9966_v4l_read(struct file *file, char  __user *buf,
 	while(dleft > 0)
 	{
 		unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft;
-	
+
 		if (parport_read(cam->pport, tbuf, tsize) < tsize) {
 			count = -EFAULT;
 			goto out;
@@ -933,7 +933,7 @@ out:
 static void w9966_attach(struct parport *port)
 {
 	int i;
-	
+
 	for (i = 0; i < W9966_MAXCAMS; i++)
 	{
 		if (w9966_cams[i].dev_state != 0)	// Cam is already assigned
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
new file mode 100644
index 000000000000..20f211b55ad4
--- /dev/null
+++ b/drivers/media/video/w9968cf.c
@@ -0,0 +1,3691 @@
+/***************************************************************************
+ * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip.       *
+ *                                                                         *
+ * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * - Memory management code from bttv driver by Ralph Metzler,             *
+ *   Marcus Metzler and Gerd Knorr.                                        *
+ * - I2C interface to kernel, high-level image sensor control routines and *
+ *   some symbolic names from OV511 driver by Mark W. McClelland.          *
+ * - Low-level I2C fast write function by Piotr Czerczak.                  *
+ * - Low-level I2C read function by Frederic Jouault.                      *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/ioctl.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+#include <linux/page-flags.h>
+#include <linux/moduleparam.h>
+
+#include "w9968cf.h"
+#include "w9968cf_decoder.h"
+
+static struct w9968cf_vpp_t* w9968cf_vpp;
+static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait);
+
+static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */
+static DEFINE_MUTEX(w9968cf_devlist_mutex); /* semaphore for list traversal */
+
+static DECLARE_RWSEM(w9968cf_disconnect); /* prevent races with open() */
+
+
+/****************************************************************************
+ * Module macros and parameters                                             *
+ ****************************************************************************/
+
+MODULE_DEVICE_TABLE(usb, winbond_id_table);
+
+MODULE_AUTHOR(W9968CF_MODULE_AUTHOR" "W9968CF_AUTHOR_EMAIL);
+MODULE_DESCRIPTION(W9968CF_MODULE_NAME);
+MODULE_VERSION(W9968CF_MODULE_VERSION);
+MODULE_LICENSE(W9968CF_MODULE_LICENSE);
+MODULE_SUPPORTED_DEVICE("Video");
+
+static int ovmod_load = W9968CF_OVMOD_LOAD;
+static unsigned short simcams = W9968CF_SIMCAMS;
+static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
+static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+				     W9968CF_PACKET_SIZE};
+static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+				       W9968CF_BUFFERS};
+static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+			      W9968CF_DOUBLE_BUFFER};
+static int clamping[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLAMPING};
+static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] =
+				      W9968CF_FILTER_TYPE};
+static int largeview[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_LARGEVIEW};
+static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+					 W9968CF_DECOMPRESSION};
+static int upscaling[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_UPSCALING};
+static unsigned short force_palette[] = {[0 ... W9968CF_MAX_DEVICES-1] = 0};
+static int force_rgb[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_FORCE_RGB};
+static int autobright[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOBRIGHT};
+static int autoexp[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOEXP};
+static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+				     W9968CF_LIGHTFREQ};
+static int bandingfilter[] = {[0 ... W9968CF_MAX_DEVICES-1]=
+			      W9968CF_BANDINGFILTER};
+static short clockdiv[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLOCKDIV};
+static int backlight[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_BACKLIGHT};
+static int mirror[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_MIRROR};
+static int monochrome[] = {[0 ... W9968CF_MAX_DEVICES-1]=W9968CF_MONOCHROME};
+static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+				    W9968CF_BRIGHTNESS};
+static unsigned int hue[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_HUE};
+static unsigned int colour[]={[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_COLOUR};
+static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+				  W9968CF_CONTRAST};
+static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+				   W9968CF_WHITENESS};
+#ifdef W9968CF_DEBUG
+static unsigned short debug = W9968CF_DEBUG_LEVEL;
+static int specific_debug = W9968CF_SPECIFIC_DEBUG;
+#endif
+
+static unsigned int param_nv[24]; /* number of values per parameter */
+
+#ifdef CONFIG_KMOD
+module_param(ovmod_load, bool, 0644);
+#endif
+module_param(simcams, ushort, 0644);
+module_param_array(video_nr, short, &param_nv[0], 0444);
+module_param_array(packet_size, uint, &param_nv[1], 0444);
+module_param_array(max_buffers, ushort, &param_nv[2], 0444);
+module_param_array(double_buffer, bool, &param_nv[3], 0444);
+module_param_array(clamping, bool, &param_nv[4], 0444);
+module_param_array(filter_type, ushort, &param_nv[5], 0444);
+module_param_array(largeview, bool, &param_nv[6], 0444);
+module_param_array(decompression, ushort, &param_nv[7], 0444);
+module_param_array(upscaling, bool, &param_nv[8], 0444);
+module_param_array(force_palette, ushort, &param_nv[9], 0444);
+module_param_array(force_rgb, ushort, &param_nv[10], 0444);
+module_param_array(autobright, bool, &param_nv[11], 0444);
+module_param_array(autoexp, bool, &param_nv[12], 0444);
+module_param_array(lightfreq, ushort, &param_nv[13], 0444);
+module_param_array(bandingfilter, bool, &param_nv[14], 0444);
+module_param_array(clockdiv, short, &param_nv[15], 0444);
+module_param_array(backlight, bool, &param_nv[16], 0444);
+module_param_array(mirror, bool, &param_nv[17], 0444);
+module_param_array(monochrome, bool, &param_nv[18], 0444);
+module_param_array(brightness, uint, &param_nv[19], 0444);
+module_param_array(hue, uint, &param_nv[20], 0444);
+module_param_array(colour, uint, &param_nv[21], 0444);
+module_param_array(contrast, uint, &param_nv[22], 0444);
+module_param_array(whiteness, uint, &param_nv[23], 0444);
+#ifdef W9968CF_DEBUG
+module_param(debug, ushort, 0644);
+module_param(specific_debug, bool, 0644);
+#endif
+
+#ifdef CONFIG_KMOD
+MODULE_PARM_DESC(ovmod_load,
+		 "\n<0|1> Automatic 'ovcamchip' module loading."
+		 "\n0 disabled, 1 enabled."
+		 "\nIf enabled,'insmod' searches for the required 'ovcamchip'"
+		 "\nmodule in the system, according to its configuration, and"
+		 "\nattempts to load that module automatically. This action is"
+		 "\nperformed once as soon as the 'w9968cf' module is loaded"
+		 "\ninto memory."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
+		 "\n");
+#endif
+MODULE_PARM_DESC(simcams,
+		 "\n<n> Number of cameras allowed to stream simultaneously."
+		 "\nn may vary from 0 to "
+		 __MODULE_STRING(W9968CF_MAX_DEVICES)"."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"."
+		 "\n");
+MODULE_PARM_DESC(video_nr,
+		 "\n<-1|n[,...]> Specify V4L minor mode number."
+		 "\n -1 = use next available (default)"
+		 "\n  n = use minor number n (integer >= 0)"
+		 "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES)
+		 " cameras this way."
+		 "\nFor example:"
+		 "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+		 "\nthe second camera and use auto for the first"
+		 "\none and for every other camera."
+		 "\n");
+MODULE_PARM_DESC(packet_size,
+		 "\n<n[,...]> Specify the maximum data payload"
+		 "\nsize in bytes for alternate settings, for each device."
+		 "\nn is scaled between 63 and 1023 "
+		 "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")."
+		 "\n");
+MODULE_PARM_DESC(max_buffers,
+		 "\n<n[,...]> For advanced users."
+		 "\nSpecify the maximum number of video frame buffers"
+		 "\nto allocate for each device, from 2 to "
+		 __MODULE_STRING(W9968CF_MAX_BUFFERS)
+		 ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")."
+		 "\n");
+MODULE_PARM_DESC(double_buffer,
+		 "\n<0|1[,...]> "
+		 "Hardware double buffering: 0 disabled, 1 enabled."
+		 "\nIt should be enabled if you want smooth video output: if"
+		 "\nyou obtain out of sync. video, disable it, or try to"
+		 "\ndecrease the 'clockdiv' module parameter value."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(clamping,
+		 "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(filter_type,
+		 "\n<0|1|2[,...]> Video filter type."
+		 "\n0 none, 1 (1-2-1) 3-tap filter, "
+		 "2 (2-3-6-3-2) 5-tap filter."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE)
+		 " for every device."
+		 "\nThe filter is used to reduce noise and aliasing artifacts"
+		 "\nproduced by the CCD or CMOS image sensor, and the scaling"
+		 " process."
+		 "\n");
+MODULE_PARM_DESC(largeview,
+		 "\n<0|1[,...]> Large view: 0 disabled, 1 enabled."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(upscaling,
+		 "\n<0|1[,...]> Software scaling (for non-compressed video):"
+		 "\n0 disabled, 1 enabled."
+		 "\nDisable it if you have a slow CPU or you don't have"
+		 " enough memory."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING)
+		 " for every device."
+		 "\nIf 'w9968cf-vpp' is not present, this parameter is"
+		 " set to 0."
+		 "\n");
+MODULE_PARM_DESC(decompression,
+		 "\n<0|1|2[,...]> Software video decompression:"
+		 "\n- 0 disables decompression (doesn't allow formats needing"
+		 " decompression)"
+		 "\n- 1 forces decompression (allows formats needing"
+		 " decompression only);"
+		 "\n- 2 allows any permitted formats."
+		 "\nFormats supporting compressed video are YUV422P and"
+		 " YUV420P/YUV420 "
+		 "\nin any resolutions where both width and height are "
+		 "a multiple of 16."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION)
+		 " for every device."
+		 "\nIf 'w9968cf-vpp' is not present, forcing decompression is "
+		 "\nnot allowed; in this case this parameter is set to 2."
+		 "\n");
+MODULE_PARM_DESC(force_palette,
+		 "\n<0"
+		 "|" __MODULE_STRING(VIDEO_PALETTE_UYVY)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_YUV420)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_YUYV)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_YUV422)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_GREY)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_RGB555)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_RGB565)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_RGB24)
+		 "|" __MODULE_STRING(VIDEO_PALETTE_RGB32)
+		 "[,...]>"
+		 " Force picture palette."
+		 "\nIn order:"
+		 "\n- 0 allows any of the following formats:"
+		 "\n- UYVY    16 bpp - Original video, compression disabled"
+		 "\n- YUV420  12 bpp - Original video, compression enabled"
+		 "\n- YUV422P 16 bpp - Original video, compression enabled"
+		 "\n- YUV420P 12 bpp - Original video, compression enabled"
+		 "\n- YUVY    16 bpp - Software conversion from UYVY"
+		 "\n- YUV422  16 bpp - Software conversion from UYVY"
+		 "\n- GREY     8 bpp - Software conversion from UYVY"
+		 "\n- RGB555  16 bpp - Software conversion from UYVY"
+		 "\n- RGB565  16 bpp - Software conversion from UYVY"
+		 "\n- RGB24   24 bpp - Software conversion from UYVY"
+		 "\n- RGB32   32 bpp - Software conversion from UYVY"
+		 "\nWhen not 0, this parameter will override 'decompression'."
+		 "\nDefault value is 0 for every device."
+		 "\nInitial palette is "
+		 __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"."
+		 "\nIf 'w9968cf-vpp' is not present, this parameter is"
+		 " set to 9 (UYVY)."
+		 "\n");
+MODULE_PARM_DESC(force_rgb,
+		 "\n<0|1[,...]> Read RGB video data instead of BGR:"
+		 "\n 1 = use RGB component ordering."
+		 "\n 0 = use BGR component ordering."
+		 "\nThis parameter has effect when using RGBX palettes only."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(autobright,
+		 "\n<0|1[,...]> Image sensor automatically changes brightness:"
+		 "\n 0 = no, 1 = yes"
+		 "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(autoexp,
+		 "\n<0|1[,...]> Image sensor automatically changes exposure:"
+		 "\n 0 = no, 1 = yes"
+		 "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(lightfreq,
+		 "\n<50|60[,...]> Light frequency in Hz:"
+		 "\n 50 for European and Asian lighting,"
+		 " 60 for American lighting."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(bandingfilter,
+		 "\n<0|1[,...]> Banding filter to reduce effects of"
+		 " fluorescent lighting:"
+		 "\n 0 disabled, 1 enabled."
+		 "\nThis filter tries to reduce the pattern of horizontal"
+		 "\nlight/dark bands caused by some (usually fluorescent)"
+		 " lighting."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(clockdiv,
+		 "\n<-1|n[,...]> "
+		 "Force pixel clock divisor to a specific value (for experts):"
+		 "\n  n may vary from 0 to 127."
+		 "\n -1 for automatic value."
+		 "\nSee also the 'double_buffer' module parameter."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(backlight,
+		 "\n<0|1[,...]> Objects are lit from behind:"
+		 "\n 0 = no, 1 = yes"
+		 "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(mirror,
+		 "\n<0|1[,...]> Reverse image horizontally:"
+		 "\n 0 = no, 1 = yes"
+		 "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(monochrome,
+		 "\n<0|1[,...]> Use image sensor as monochrome sensor:"
+		 "\n 0 = no, 1 = yes"
+		 "\nNot all the sensors support monochrome color."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(brightness,
+		 "\n<n[,...]> Set picture brightness (0-65535)."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS)
+		 " for every device."
+		 "\nThis parameter has no effect if 'autobright' is enabled."
+		 "\n");
+MODULE_PARM_DESC(hue,
+		 "\n<n[,...]> Set picture hue (0-65535)."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_HUE)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(colour,
+		 "\n<n[,...]> Set picture saturation (0-65535)."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(contrast,
+		 "\n<n[,...]> Set picture contrast (0-65535)."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST)
+		 " for every device."
+		 "\n");
+MODULE_PARM_DESC(whiteness,
+		 "\n<n[,...]> Set picture whiteness (0-65535)."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS)
+		 " for every device."
+		 "\n");
+#ifdef W9968CF_DEBUG
+MODULE_PARM_DESC(debug,
+		 "\n<n> Debugging information level, from 0 to 6:"
+		 "\n0 = none (use carefully)"
+		 "\n1 = critical errors"
+		 "\n2 = significant informations"
+		 "\n3 = configuration or general messages"
+		 "\n4 = warnings"
+		 "\n5 = called functions"
+		 "\n6 = function internals"
+		 "\nLevel 5 and 6 are useful for testing only, when only "
+		 "one device is used."
+		 "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"."
+		 "\n");
+MODULE_PARM_DESC(specific_debug,
+		 "\n<0|1> Enable or disable specific debugging messages:"
+		 "\n0 = print messages concerning every level"
+		 " <= 'debug' level."
+		 "\n1 = print messages concerning the level"
+		 " indicated by 'debug'."
+		 "\nDefault value is "
+		 __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"."
+		 "\n");
+#endif /* W9968CF_DEBUG */
+
+
+
+/****************************************************************************
+ * Some prototypes                                                          *
+ ****************************************************************************/
+
+/* Video4linux interface */
+static struct file_operations w9968cf_fops;
+static int w9968cf_open(struct inode*, struct file*);
+static int w9968cf_release(struct inode*, struct file*);
+static int w9968cf_mmap(struct file*, struct vm_area_struct*);
+static int w9968cf_ioctl(struct inode*, struct file*, unsigned, unsigned long);
+static ssize_t w9968cf_read(struct file*, char __user *, size_t, loff_t*);
+static int w9968cf_v4l_ioctl(struct inode*, struct file*, unsigned int,
+			     void __user *);
+
+/* USB-specific */
+static int w9968cf_start_transfer(struct w9968cf_device*);
+static int w9968cf_stop_transfer(struct w9968cf_device*);
+static int w9968cf_write_reg(struct w9968cf_device*, u16 value, u16 index);
+static int w9968cf_read_reg(struct w9968cf_device*, u16 index);
+static int w9968cf_write_fsb(struct w9968cf_device*, u16* data);
+static int w9968cf_write_sb(struct w9968cf_device*, u16 value);
+static int w9968cf_read_sb(struct w9968cf_device*);
+static int w9968cf_upload_quantizationtables(struct w9968cf_device*);
+static void w9968cf_urb_complete(struct urb *urb, struct pt_regs *regs);
+
+/* Low-level I2C (SMBus) I/O */
+static int w9968cf_smbus_start(struct w9968cf_device*);
+static int w9968cf_smbus_stop(struct w9968cf_device*);
+static int w9968cf_smbus_write_byte(struct w9968cf_device*, u8 v);
+static int w9968cf_smbus_read_byte(struct w9968cf_device*, u8* v);
+static int w9968cf_smbus_write_ack(struct w9968cf_device*);
+static int w9968cf_smbus_read_ack(struct w9968cf_device*);
+static int w9968cf_smbus_refresh_bus(struct w9968cf_device*);
+static int w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
+				      u16 address, u8* value);
+static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address,
+					   u8 subaddress, u8* value);
+static int w9968cf_i2c_adap_write_byte(struct w9968cf_device*,
+				       u16 address, u8 subaddress);
+static int w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device*,
+						u16 address, u8 subaddress,
+						u8 value);
+
+/* I2C interface to kernel */
+static int w9968cf_i2c_init(struct w9968cf_device*);
+static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr,
+				  unsigned short flags, char read_write,
+				  u8 command, int size, union i2c_smbus_data*);
+static u32 w9968cf_i2c_func(struct i2c_adapter*);
+static int w9968cf_i2c_attach_inform(struct i2c_client*);
+static int w9968cf_i2c_detach_inform(struct i2c_client*);
+static int w9968cf_i2c_control(struct i2c_adapter*, unsigned int cmd,
+			       unsigned long arg);
+
+/* Memory management */
+static void* rvmalloc(unsigned long size);
+static void rvfree(void *mem, unsigned long size);
+static void w9968cf_deallocate_memory(struct w9968cf_device*);
+static int  w9968cf_allocate_memory(struct w9968cf_device*);
+
+/* High-level image sensor control functions */
+static int w9968cf_sensor_set_control(struct w9968cf_device*,int cid,int val);
+static int w9968cf_sensor_get_control(struct w9968cf_device*,int cid,int *val);
+static int w9968cf_sensor_cmd(struct w9968cf_device*,
+			      unsigned int cmd, void *arg);
+static int w9968cf_sensor_init(struct w9968cf_device*);
+static int w9968cf_sensor_update_settings(struct w9968cf_device*);
+static int w9968cf_sensor_get_picture(struct w9968cf_device*);
+static int w9968cf_sensor_update_picture(struct w9968cf_device*,
+					 struct video_picture pict);
+
+/* Other helper functions */
+static void w9968cf_configure_camera(struct w9968cf_device*,struct usb_device*,
+				     enum w9968cf_model_id,
+				     const unsigned short dev_nr);
+static void w9968cf_adjust_configuration(struct w9968cf_device*);
+static int w9968cf_turn_on_led(struct w9968cf_device*);
+static int w9968cf_init_chip(struct w9968cf_device*);
+static inline u16 w9968cf_valid_palette(u16 palette);
+static inline u16 w9968cf_valid_depth(u16 palette);
+static inline u8 w9968cf_need_decompression(u16 palette);
+static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture);
+static int w9968cf_set_window(struct w9968cf_device*, struct video_window);
+static int w9968cf_postprocess_frame(struct w9968cf_device*,
+				     struct w9968cf_frame_t*);
+static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h);
+static void w9968cf_init_framelist(struct w9968cf_device*);
+static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num);
+static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
+static void w9968cf_release_resources(struct w9968cf_device*);
+
+
+
+/****************************************************************************
+ * Symbolic names                                                           *
+ ****************************************************************************/
+
+/* Used to represent a list of values and their respective symbolic names */
+struct w9968cf_symbolic_list {
+	const int num;
+	const char *name;
+};
+
+/*--------------------------------------------------------------------------
+  Returns the name of the matching element in the symbolic_list array. The
+  end of the list must be marked with an element that has a NULL name.
+  --------------------------------------------------------------------------*/
+static inline const char *
+symbolic(struct w9968cf_symbolic_list list[], const int num)
+{
+	int i;
+
+	for (i = 0; list[i].name != NULL; i++)
+		if (list[i].num == num)
+			return (list[i].name);
+
+	return "Unknown";
+}
+
+static struct w9968cf_symbolic_list camlist[] = {
+	{ W9968CF_MOD_GENERIC, "W996[87]CF JPEG USB Dual Mode Camera" },
+	{ W9968CF_MOD_CLVBWGP, "Creative Labs Video Blaster WebCam Go Plus" },
+
+	/* Other cameras (having the same descriptors as Generic W996[87]CF) */
+	{ W9968CF_MOD_ADPVDMA, "Aroma Digi Pen VGA Dual Mode ADG-5000" },
+	{ W9986CF_MOD_AAU, "AVerMedia AVerTV USB" },
+	{ W9968CF_MOD_CLVBWG, "Creative Labs Video Blaster WebCam Go" },
+	{ W9968CF_MOD_LL, "Lebon LDC-035A" },
+	{ W9968CF_MOD_EEEMC, "Ezonics EZ-802 EZMega Cam" },
+	{ W9968CF_MOD_OOE, "OmniVision OV8610-EDE" },
+	{ W9968CF_MOD_ODPVDMPC, "OPCOM Digi Pen VGA Dual Mode Pen Camera" },
+	{ W9968CF_MOD_PDPII, "Pretec Digi Pen-II" },
+	{ W9968CF_MOD_PDP480, "Pretec DigiPen-480" },
+
+	{  -1, NULL }
+};
+
+static struct w9968cf_symbolic_list senlist[] = {
+	{ CC_OV76BE,   "OV76BE" },
+	{ CC_OV7610,   "OV7610" },
+	{ CC_OV7620,   "OV7620" },
+	{ CC_OV7620AE, "OV7620AE" },
+	{ CC_OV6620,   "OV6620" },
+	{ CC_OV6630,   "OV6630" },
+	{ CC_OV6630AE, "OV6630AE" },
+	{ CC_OV6630AF, "OV6630AF" },
+	{ -1, NULL }
+};
+
+/* Video4Linux1 palettes */
+static struct w9968cf_symbolic_list v4l1_plist[] = {
+	{ VIDEO_PALETTE_GREY,    "GREY" },
+	{ VIDEO_PALETTE_HI240,   "HI240" },
+	{ VIDEO_PALETTE_RGB565,  "RGB565" },
+	{ VIDEO_PALETTE_RGB24,   "RGB24" },
+	{ VIDEO_PALETTE_RGB32,   "RGB32" },
+	{ VIDEO_PALETTE_RGB555,  "RGB555" },
+	{ VIDEO_PALETTE_YUV422,  "YUV422" },
+	{ VIDEO_PALETTE_YUYV,    "YUYV" },
+	{ VIDEO_PALETTE_UYVY,    "UYVY" },
+	{ VIDEO_PALETTE_YUV420,  "YUV420" },
+	{ VIDEO_PALETTE_YUV411,  "YUV411" },
+	{ VIDEO_PALETTE_RAW,     "RAW" },
+	{ VIDEO_PALETTE_YUV422P, "YUV422P" },
+	{ VIDEO_PALETTE_YUV411P, "YUV411P" },
+	{ VIDEO_PALETTE_YUV420P, "YUV420P" },
+	{ VIDEO_PALETTE_YUV410P, "YUV410P" },
+	{ -1, NULL }
+};
+
+/* Decoder error codes: */
+static struct w9968cf_symbolic_list decoder_errlist[] = {
+	{ W9968CF_DEC_ERR_CORRUPTED_DATA, "Corrupted data" },
+	{ W9968CF_DEC_ERR_BUF_OVERFLOW,   "Buffer overflow" },
+	{ W9968CF_DEC_ERR_NO_SOI,         "SOI marker not found" },
+	{ W9968CF_DEC_ERR_NO_SOF0,        "SOF0 marker not found" },
+	{ W9968CF_DEC_ERR_NO_SOS,         "SOS marker not found" },
+	{ W9968CF_DEC_ERR_NO_EOI,         "EOI marker not found" },
+	{ -1, NULL }
+};
+
+/* URB error codes: */
+static struct w9968cf_symbolic_list urb_errlist[] = {
+	{ -ENOMEM,    "No memory for allocation of internal structures" },
+	{ -ENOSPC,    "The host controller's bandwidth is already consumed" },
+	{ -ENOENT,    "URB was canceled by unlink_urb" },
+	{ -EXDEV,     "ISO transfer only partially completed" },
+	{ -EAGAIN,    "Too match scheduled for the future" },
+	{ -ENXIO,     "URB already queued" },
+	{ -EFBIG,     "Too much ISO frames requested" },
+	{ -ENOSR,     "Buffer error (overrun)" },
+	{ -EPIPE,     "Specified endpoint is stalled (device not responding)"},
+	{ -EOVERFLOW, "Babble (bad cable?)" },
+	{ -EPROTO,    "Bit-stuff error (bad cable?)" },
+	{ -EILSEQ,    "CRC/Timeout" },
+	{ -ETIMEDOUT, "NAK (device does not respond)" },
+	{ -1, NULL }
+};
+
+
+
+/****************************************************************************
+ * Memory management functions                                              *
+ ****************************************************************************/
+static void* rvmalloc(unsigned long size)
+{
+	void* mem;
+	unsigned long adr;
+
+	size = PAGE_ALIGN(size);
+	mem = vmalloc_32(size);
+	if (!mem)
+		return NULL;
+
+	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+	adr = (unsigned long) mem;
+	while (size > 0) {
+		SetPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	return mem;
+}
+
+
+static void rvfree(void* mem, unsigned long size)
+{
+	unsigned long adr;
+
+	if (!mem)
+		return;
+
+	adr = (unsigned long) mem;
+	while ((long) size > 0) {
+		ClearPageReserved(vmalloc_to_page((void *)adr));
+		adr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	vfree(mem);
+}
+
+
+/*--------------------------------------------------------------------------
+  Deallocate previously allocated memory.
+  --------------------------------------------------------------------------*/
+static void w9968cf_deallocate_memory(struct w9968cf_device* cam)
+{
+	u8 i;
+
+	/* Free the isochronous transfer buffers */
+	for (i = 0; i < W9968CF_URBS; i++) {
+		kfree(cam->transfer_buffer[i]);
+		cam->transfer_buffer[i] = NULL;
+	}
+
+	/* Free temporary frame buffer */
+	if (cam->frame_tmp.buffer) {
+		rvfree(cam->frame_tmp.buffer, cam->frame_tmp.size);
+		cam->frame_tmp.buffer = NULL;
+	}
+
+	/* Free helper buffer */
+	if (cam->frame_vpp.buffer) {
+		rvfree(cam->frame_vpp.buffer, cam->frame_vpp.size);
+		cam->frame_vpp.buffer = NULL;
+	}
+
+	/* Free video frame buffers */
+	if (cam->frame[0].buffer) {
+		rvfree(cam->frame[0].buffer, cam->nbuffers*cam->frame[0].size);
+		cam->frame[0].buffer = NULL;
+	}
+
+	cam->nbuffers = 0;
+
+	DBG(5, "Memory successfully deallocated")
+}
+
+
+/*--------------------------------------------------------------------------
+  Allocate memory buffers for USB transfers and video frames.
+  This function is called by open() only.
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_allocate_memory(struct w9968cf_device* cam)
+{
+	const u16 p_size = wMaxPacketSize[cam->altsetting-1];
+	void* buff = NULL;
+	unsigned long hw_bufsize, vpp_bufsize;
+	u8 i, bpp;
+
+	/* NOTE: Deallocation is done elsewhere in case of error */
+
+	/* Calculate the max amount of raw data per frame from the device */
+	hw_bufsize = cam->maxwidth*cam->maxheight*2;
+
+	/* Calculate the max buf. size needed for post-processing routines */
+	bpp = (w9968cf_vpp) ? 4 : 2;
+	if (cam->upscaling)
+		vpp_bufsize = max(W9968CF_MAX_WIDTH*W9968CF_MAX_HEIGHT*bpp,
+				  cam->maxwidth*cam->maxheight*bpp);
+	else
+		vpp_bufsize = cam->maxwidth*cam->maxheight*bpp;
+
+	/* Allocate memory for the isochronous transfer buffers */
+	for (i = 0; i < W9968CF_URBS; i++) {
+		if (!(cam->transfer_buffer[i] =
+		      kzalloc(W9968CF_ISO_PACKETS*p_size, GFP_KERNEL))) {
+			DBG(1, "Couldn't allocate memory for the isochronous "
+			       "transfer buffers (%u bytes)",
+			    p_size * W9968CF_ISO_PACKETS)
+			return -ENOMEM;
+		}
+	}
+
+	/* Allocate memory for the temporary frame buffer */
+	if (!(cam->frame_tmp.buffer = rvmalloc(hw_bufsize))) {
+		DBG(1, "Couldn't allocate memory for the temporary "
+		       "video frame buffer (%lu bytes)", hw_bufsize)
+		return -ENOMEM;
+	}
+	cam->frame_tmp.size = hw_bufsize;
+	cam->frame_tmp.number = -1;
+
+	/* Allocate memory for the helper buffer */
+	if (w9968cf_vpp) {
+		if (!(cam->frame_vpp.buffer = rvmalloc(vpp_bufsize))) {
+			DBG(1, "Couldn't allocate memory for the helper buffer"
+			       " (%lu bytes)", vpp_bufsize)
+			return -ENOMEM;
+		}
+		cam->frame_vpp.size = vpp_bufsize;
+	} else
+		cam->frame_vpp.buffer = NULL;
+
+	/* Allocate memory for video frame buffers */
+	cam->nbuffers = cam->max_buffers;
+	while (cam->nbuffers >= 2) {
+		if ((buff = rvmalloc(cam->nbuffers * vpp_bufsize)))
+			break;
+		else
+			cam->nbuffers--;
+	}
+
+	if (!buff) {
+		DBG(1, "Couldn't allocate memory for the video frame buffers")
+		cam->nbuffers = 0;
+		return -ENOMEM;
+	}
+
+	if (cam->nbuffers != cam->max_buffers)
+		DBG(2, "Couldn't allocate memory for %u video frame buffers. "
+		       "Only memory for %u buffers has been allocated",
+		    cam->max_buffers, cam->nbuffers)
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		cam->frame[i].buffer = buff + i*vpp_bufsize;
+		cam->frame[i].size = vpp_bufsize;
+		cam->frame[i].number = i;
+		/* Circular list */
+		if (i != cam->nbuffers-1)
+			cam->frame[i].next = &cam->frame[i+1];
+		else
+			cam->frame[i].next = &cam->frame[0];
+		cam->frame[i].status = F_UNUSED;
+	}
+
+	DBG(5, "Memory successfully allocated")
+	return 0;
+}
+
+
+
+/****************************************************************************
+ * USB-specific functions                                                   *
+ ****************************************************************************/
+
+/*--------------------------------------------------------------------------
+  This is an handler function which is called after the URBs are completed.
+  It collects multiple data packets coming from the camera by putting them
+  into frame buffers: one or more zero data length data packets are used to
+  mark the end of a video frame; the first non-zero data packet is the start
+  of the next video frame; if an error is encountered in a packet, the entire
+  video frame is discarded and grabbed again.
+  If there are no requested frames in the FIFO list, packets are collected into
+  a temporary buffer.
+  --------------------------------------------------------------------------*/
+static void w9968cf_urb_complete(struct urb *urb, struct pt_regs *regs)
+{
+	struct w9968cf_device* cam = (struct w9968cf_device*)urb->context;
+	struct w9968cf_frame_t** f;
+	unsigned int len, status;
+	void* pos;
+	u8 i;
+	int err = 0;
+
+	if ((!cam->streaming) || cam->disconnected) {
+		DBG(4, "Got interrupt, but not streaming")
+		return;
+	}
+
+	/* "(*f)" will be used instead of "cam->frame_current" */
+	f = &cam->frame_current;
+
+	/* If a frame has been requested and we are grabbing into
+	   the temporary frame, we'll switch to that requested frame */
+	if ((*f) == &cam->frame_tmp && *cam->requested_frame) {
+		if (cam->frame_tmp.status == F_GRABBING) {
+			w9968cf_pop_frame(cam, &cam->frame_current);
+			(*f)->status = F_GRABBING;
+			(*f)->length = cam->frame_tmp.length;
+			memcpy((*f)->buffer, cam->frame_tmp.buffer,
+			       (*f)->length);
+			DBG(6, "Switched from temp. frame to frame #%d",
+			    (*f)->number)
+		}
+	}
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		len = urb->iso_frame_desc[i].actual_length;
+		status = urb->iso_frame_desc[i].status;
+		pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
+
+		if (status && len != 0) {
+			DBG(4, "URB failed, error in data packet "
+			       "(error #%u, %s)",
+			    status, symbolic(urb_errlist, status))
+			(*f)->status = F_ERROR;
+			continue;
+		}
+
+		if (len) { /* start of frame */
+
+			if ((*f)->status == F_UNUSED) {
+				(*f)->status = F_GRABBING;
+				(*f)->length = 0;
+			}
+
+			/* Buffer overflows shouldn't happen, however...*/
+			if ((*f)->length + len > (*f)->size) {
+				DBG(4, "Buffer overflow: bad data packets")
+				(*f)->status = F_ERROR;
+			}
+
+			if ((*f)->status == F_GRABBING) {
+				memcpy((*f)->buffer + (*f)->length, pos, len);
+				(*f)->length += len;
+			}
+
+		} else if ((*f)->status == F_GRABBING) { /* end of frame */
+
+			DBG(6, "Frame #%d successfully grabbed", (*f)->number)
+
+			if (cam->vpp_flag & VPP_DECOMPRESSION) {
+				err = w9968cf_vpp->check_headers((*f)->buffer,
+								 (*f)->length);
+				if (err) {
+					DBG(4, "Skip corrupted frame: %s",
+					    symbolic(decoder_errlist, err))
+					(*f)->status = F_UNUSED;
+					continue; /* grab this frame again */
+				}
+			}
+
+			(*f)->status = F_READY;
+			(*f)->queued = 0;
+
+			/* Take a pointer to the new frame from the FIFO list.
+			   If the list is empty,we'll use the temporary frame*/
+			if (*cam->requested_frame)
+				w9968cf_pop_frame(cam, &cam->frame_current);
+			else {
+				cam->frame_current = &cam->frame_tmp;
+				(*f)->status = F_UNUSED;
+			}
+
+		} else if ((*f)->status == F_ERROR)
+			(*f)->status = F_UNUSED; /* grab it again */
+
+		PDBGG("Frame length %lu | pack.#%u | pack.len. %u | state %d",
+		      (unsigned long)(*f)->length, i, len, (*f)->status)
+
+	} /* end for */
+
+	/* Resubmit this URB */
+	urb->dev = cam->usbdev;
+	urb->status = 0;
+	spin_lock(&cam->urb_lock);
+	if (cam->streaming)
+		if ((err = usb_submit_urb(urb, GFP_ATOMIC))) {
+			cam->misconfigured = 1;
+			DBG(1, "Couldn't resubmit the URB: error %d, %s",
+			    err, symbolic(urb_errlist, err))
+		}
+	spin_unlock(&cam->urb_lock);
+
+	/* Wake up the user process */
+	wake_up_interruptible(&cam->wait_queue);
+}
+
+
+/*---------------------------------------------------------------------------
+  Setup the URB structures for the isochronous transfer.
+  Submit the URBs so that the data transfer begins.
+  Return 0 on success, a negative number otherwise.
+  ---------------------------------------------------------------------------*/
+static int w9968cf_start_transfer(struct w9968cf_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	struct urb* urb;
+	const u16 p_size = wMaxPacketSize[cam->altsetting-1];
+	u16 w, h, d;
+	int vidcapt;
+	u32 t_size;
+	int err = 0;
+	s8 i, j;
+
+	for (i = 0; i < W9968CF_URBS; i++) {
+		urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL);
+		cam->urb[i] = urb;
+		if (!urb) {
+			for (j = 0; j < i; j++)
+				usb_free_urb(cam->urb[j]);
+			DBG(1, "Couldn't allocate the URB structures")
+			return -ENOMEM;
+		}
+
+		urb->dev = udev;
+		urb->context = (void*)cam;
+		urb->pipe = usb_rcvisocpipe(udev, 1);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->number_of_packets = W9968CF_ISO_PACKETS;
+		urb->complete = w9968cf_urb_complete;
+		urb->transfer_buffer = cam->transfer_buffer[i];
+		urb->transfer_buffer_length = p_size*W9968CF_ISO_PACKETS;
+		urb->interval = 1;
+		for (j = 0; j < W9968CF_ISO_PACKETS; j++) {
+			urb->iso_frame_desc[j].offset = p_size*j;
+			urb->iso_frame_desc[j].length = p_size;
+		}
+	}
+
+	/* Transfer size per frame, in WORD ! */
+	d = cam->hw_depth;
+	w = cam->hw_width;
+	h = cam->hw_height;
+
+	t_size = (w*h*d)/16;
+
+	err = w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
+	err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
+
+	/* Transfer size */
+	err += w9968cf_write_reg(cam, t_size & 0xffff, 0x3d); /* low bits */
+	err += w9968cf_write_reg(cam, t_size >> 16, 0x3e);    /* high bits */
+
+	if (cam->vpp_flag & VPP_DECOMPRESSION)
+		err += w9968cf_upload_quantizationtables(cam);
+
+	vidcapt = w9968cf_read_reg(cam, 0x16); /* read picture settings */
+	err += w9968cf_write_reg(cam, vidcapt|0x8000, 0x16); /* capt. enable */
+
+	err += usb_set_interface(udev, 0, cam->altsetting);
+	err += w9968cf_write_reg(cam, 0x8a05, 0x3c); /* USB FIFO enable */
+
+	if (err || (vidcapt < 0)) {
+		for (i = 0; i < W9968CF_URBS; i++)
+			usb_free_urb(cam->urb[i]);
+		DBG(1, "Couldn't tell the camera to start the data transfer")
+		return err;
+	}
+
+	w9968cf_init_framelist(cam);
+
+	/* Begin to grab into the temporary buffer */
+	cam->frame_tmp.status = F_UNUSED;
+	cam->frame_tmp.queued = 0;
+	cam->frame_current = &cam->frame_tmp;
+
+	if (!(cam->vpp_flag & VPP_DECOMPRESSION))
+		DBG(5, "Isochronous transfer size: %lu bytes/frame",
+		    (unsigned long)t_size*2)
+
+	DBG(5, "Starting the isochronous transfer...")
+
+	cam->streaming = 1;
+
+	/* Submit the URBs */
+	for (i = 0; i < W9968CF_URBS; i++) {
+		err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
+		if (err) {
+			cam->streaming = 0;
+			for (j = i-1; j >= 0; j--) {
+				usb_kill_urb(cam->urb[j]);
+				usb_free_urb(cam->urb[j]);
+			}
+			DBG(1, "Couldn't send a transfer request to the "
+			       "USB core (error #%d, %s)", err,
+			    symbolic(urb_errlist, err))
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+
+/*--------------------------------------------------------------------------
+  Stop the isochronous transfer and set alternate setting to 0 (0Mb/s).
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_stop_transfer(struct w9968cf_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	unsigned long lock_flags;
+	int err = 0;
+	s8 i;
+
+	if (!cam->streaming)
+		return 0;
+
+	/* This avoids race conditions with usb_submit_urb()
+	   in the URB completition handler */
+	spin_lock_irqsave(&cam->urb_lock, lock_flags);
+	cam->streaming = 0;
+	spin_unlock_irqrestore(&cam->urb_lock, lock_flags);
+
+	for (i = W9968CF_URBS-1; i >= 0; i--)
+		if (cam->urb[i]) {
+			usb_kill_urb(cam->urb[i]);
+			usb_free_urb(cam->urb[i]);
+			cam->urb[i] = NULL;
+		}
+
+	if (cam->disconnected)
+		goto exit;
+
+	err = w9968cf_write_reg(cam, 0x0a05, 0x3c); /* stop USB transfer */
+	err += usb_set_interface(udev, 0, 0); /* 0 Mb/s */
+	err += w9968cf_write_reg(cam, 0x0000, 0x39); /* disable JPEG encoder */
+	err += w9968cf_write_reg(cam, 0x0000, 0x16); /* stop video capture */
+
+	if (err) {
+		DBG(2, "Failed to tell the camera to stop the isochronous "
+		       "transfer. However this is not a critical error.")
+		return -EIO;
+	}
+
+exit:
+	DBG(5, "Isochronous transfer stopped")
+	return 0;
+}
+
+
+/*--------------------------------------------------------------------------
+  Write a W9968CF register.
+  Return 0 on success, -1 otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_write_reg(struct w9968cf_device* cam, u16 value, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	int res;
+
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
+			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			      value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT);
+
+	if (res < 0)
+		DBG(4, "Failed to write a register "
+		       "(value 0x%04X, index 0x%02X, error #%d, %s)",
+		    value, index, res, symbolic(urb_errlist, res))
+
+	return (res >= 0) ? 0 : -1;
+}
+
+
+/*--------------------------------------------------------------------------
+  Read a W9968CF register.
+  Return the register value on success, -1 otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_read_reg(struct w9968cf_device* cam, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	u16* buff = cam->control_buffer;
+	int res;
+
+	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 1,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT);
+
+	if (res < 0)
+		DBG(4, "Failed to read a register "
+		       "(index 0x%02X, error #%d, %s)",
+		    index, res, symbolic(urb_errlist, res))
+
+	return (res >= 0) ? (int)(*buff) : -1;
+}
+
+
+/*--------------------------------------------------------------------------
+  Write 64-bit data to the fast serial bus registers.
+  Return 0 on success, -1 otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_write_fsb(struct w9968cf_device* cam, u16* data)
+{
+	struct usb_device* udev = cam->usbdev;
+	u16 value;
+	int res;
+
+	value = *data++;
+
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
+			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			      value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT);
+
+	if (res < 0)
+		DBG(4, "Failed to write the FSB registers "
+		       "(error #%d, %s)", res, symbolic(urb_errlist, res))
+
+	return (res >= 0) ? 0 : -1;
+}
+
+
+/*--------------------------------------------------------------------------
+  Write data to the serial bus control register.
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_write_sb(struct w9968cf_device* cam, u16 value)
+{
+	int err = 0;
+
+	err = w9968cf_write_reg(cam, value, 0x01);
+	udelay(W9968CF_I2C_BUS_DELAY);
+
+	return err;
+}
+
+
+/*--------------------------------------------------------------------------
+  Read data from the serial bus control register.
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_read_sb(struct w9968cf_device* cam)
+{
+	int v = 0;
+
+	v = w9968cf_read_reg(cam, 0x01);
+	udelay(W9968CF_I2C_BUS_DELAY);
+
+	return v;
+}
+
+
+/*--------------------------------------------------------------------------
+  Upload quantization tables for the JPEG compression.
+  This function is called by w9968cf_start_transfer().
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_upload_quantizationtables(struct w9968cf_device* cam)
+{
+	u16 a, b;
+	int err = 0, i, j;
+
+	err += w9968cf_write_reg(cam, 0x0010, 0x39); /* JPEG clock enable */
+
+	for (i = 0, j = 0; i < 32; i++, j += 2) {
+		a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8);
+		b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8);
+		err += w9968cf_write_reg(cam, a, 0x40+i);
+		err += w9968cf_write_reg(cam, b, 0x60+i);
+	}
+	err += w9968cf_write_reg(cam, 0x0012, 0x39); /* JPEG encoder enable */
+
+	return err;
+}
+
+
+
+/****************************************************************************
+ * Low-level I2C I/O functions.                                             *
+ * The adapter supports the following I2C transfer functions:               *
+ * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only)           *
+ * i2c_adap_read_byte_data()                                                *
+ * i2c_adap_read_byte()                                                     *
+ ****************************************************************************/
+
+static int w9968cf_smbus_start(struct w9968cf_device* cam)
+{
+	int err = 0;
+
+	err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+	err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
+
+	return err;
+}
+
+
+static int w9968cf_smbus_stop(struct w9968cf_device* cam)
+{
+	int err = 0;
+
+	err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+	err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+
+	return err;
+}
+
+
+static int w9968cf_smbus_write_byte(struct w9968cf_device* cam, u8 v)
+{
+	u8 bit;
+	int err = 0, sda;
+
+	for (bit = 0 ; bit < 8 ; bit++) {
+		sda = (v & 0x80) ? 2 : 0;
+		v <<= 1;
+		/* SDE=1, SDA=sda, SCL=0 */
+		err += w9968cf_write_sb(cam, 0x10 | sda);
+		/* SDE=1, SDA=sda, SCL=1 */
+		err += w9968cf_write_sb(cam, 0x11 | sda);
+		/* SDE=1, SDA=sda, SCL=0 */
+		err += w9968cf_write_sb(cam, 0x10 | sda);
+	}
+
+	return err;
+}
+
+
+static int w9968cf_smbus_read_byte(struct w9968cf_device* cam, u8* v)
+{
+	u8 bit;
+	int err = 0;
+
+	*v = 0;
+	for (bit = 0 ; bit < 8 ; bit++) {
+		*v <<= 1;
+		err += w9968cf_write_sb(cam, 0x0013);
+		*v |= (w9968cf_read_sb(cam) & 0x0008) ? 1 : 0;
+		err += w9968cf_write_sb(cam, 0x0012);
+	}
+
+	return err;
+}
+
+
+static int w9968cf_smbus_write_ack(struct w9968cf_device* cam)
+{
+	int err = 0;
+
+	err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
+	err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+	err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
+
+	return err;
+}
+
+
+static int w9968cf_smbus_read_ack(struct w9968cf_device* cam)
+{
+	int err = 0, sda;
+
+	err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+	sda = (w9968cf_read_sb(cam) & 0x08) ? 1 : 0; /* sda = SDA */
+	err += w9968cf_write_sb(cam, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+	if (sda < 0)
+		err += sda;
+	if (sda == 1) {
+		DBG(6, "Couldn't receive the ACK")
+		err += -1;
+	}
+
+	return err;
+}
+
+
+/* This seems to refresh the communication through the serial bus */
+static int w9968cf_smbus_refresh_bus(struct w9968cf_device* cam)
+{
+	int err = 0, j;
+
+	for (j = 1; j <= 10; j++) {
+		err = w9968cf_write_reg(cam, 0x0020, 0x01);
+		err += w9968cf_write_reg(cam, 0x0000, 0x01);
+		if (err)
+			break;
+	}
+
+	return err;
+}
+
+
+/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
+static int
+w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam,
+				     u16 address, u8 subaddress,u8 value)
+{
+	u16* data = cam->data_buffer;
+	int err = 0;
+
+	err += w9968cf_smbus_refresh_bus(cam);
+
+	/* Enable SBUS outputs */
+	err += w9968cf_write_sb(cam, 0x0020);
+
+	data[0] = 0x082f | ((address & 0x80) ? 0x1500 : 0x0);
+	data[0] |= (address & 0x40) ? 0x4000 : 0x0;
+	data[1] = 0x2082 | ((address & 0x40) ? 0x0005 : 0x0);
+	data[1] |= (address & 0x20) ? 0x0150 : 0x0;
+	data[1] |= (address & 0x10) ? 0x5400 : 0x0;
+	data[2] = 0x8208 | ((address & 0x08) ? 0x0015 : 0x0);
+	data[2] |= (address & 0x04) ? 0x0540 : 0x0;
+	data[2] |= (address & 0x02) ? 0x5000 : 0x0;
+	data[3] = 0x1d20 | ((address & 0x02) ? 0x0001 : 0x0);
+	data[3] |= (address & 0x01) ? 0x0054 : 0x0;
+
+	err += w9968cf_write_fsb(cam, data);
+
+	data[0] = 0x8208 | ((subaddress & 0x80) ? 0x0015 : 0x0);
+	data[0] |= (subaddress & 0x40) ? 0x0540 : 0x0;
+	data[0] |= (subaddress & 0x20) ? 0x5000 : 0x0;
+	data[1] = 0x0820 | ((subaddress & 0x20) ? 0x0001 : 0x0);
+	data[1] |= (subaddress & 0x10) ? 0x0054 : 0x0;
+	data[1] |= (subaddress & 0x08) ? 0x1500 : 0x0;
+	data[1] |= (subaddress & 0x04) ? 0x4000 : 0x0;
+	data[2] = 0x2082 | ((subaddress & 0x04) ? 0x0005 : 0x0);
+	data[2] |= (subaddress & 0x02) ? 0x0150 : 0x0;
+	data[2] |= (subaddress & 0x01) ? 0x5400 : 0x0;
+	data[3] = 0x001d;
+
+	err += w9968cf_write_fsb(cam, data);
+
+	data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
+	data[0] |= (value & 0x40) ? 0x0540 : 0x0;
+	data[0] |= (value & 0x20) ? 0x5000 : 0x0;
+	data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0);
+	data[1] |= (value & 0x10) ? 0x0054 : 0x0;
+	data[1] |= (value & 0x08) ? 0x1500 : 0x0;
+	data[1] |= (value & 0x04) ? 0x4000 : 0x0;
+	data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0);
+	data[2] |= (value & 0x02) ? 0x0150 : 0x0;
+	data[2] |= (value & 0x01) ? 0x5400 : 0x0;
+	data[3] = 0xfe1d;
+
+	err += w9968cf_write_fsb(cam, data);
+
+	/* Disable SBUS outputs */
+	err += w9968cf_write_sb(cam, 0x0000);
+
+	if (!err)
+		DBG(5, "I2C write byte data done, addr.0x%04X, subaddr.0x%02X "
+		       "value 0x%02X", address, subaddress, value)
+	else
+		DBG(5, "I2C write byte data failed, addr.0x%04X, "
+		       "subaddr.0x%02X, value 0x%02X",
+		    address, subaddress, value)
+
+	return err;
+}
+
+
+/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
+static int
+w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam,
+				u16 address, u8 subaddress,
+				u8* value)
+{
+	int err = 0;
+
+	/* Serial data enable */
+	err += w9968cf_write_sb(cam, 0x0013); /* don't change ! */
+
+	err += w9968cf_smbus_start(cam);
+	err += w9968cf_smbus_write_byte(cam, address);
+	err += w9968cf_smbus_read_ack(cam);
+	err += w9968cf_smbus_write_byte(cam, subaddress);
+	err += w9968cf_smbus_read_ack(cam);
+	err += w9968cf_smbus_stop(cam);
+	err += w9968cf_smbus_start(cam);
+	err += w9968cf_smbus_write_byte(cam, address + 1);
+	err += w9968cf_smbus_read_ack(cam);
+	err += w9968cf_smbus_read_byte(cam, value);
+	err += w9968cf_smbus_write_ack(cam);
+	err += w9968cf_smbus_stop(cam);
+
+	/* Serial data disable */
+	err += w9968cf_write_sb(cam, 0x0000);
+
+	if (!err)
+		DBG(5, "I2C read byte data done, addr.0x%04X, "
+		       "subaddr.0x%02X, value 0x%02X",
+		    address, subaddress, *value)
+	else
+		DBG(5, "I2C read byte data failed, addr.0x%04X, "
+		       "subaddr.0x%02X, wrong value 0x%02X",
+		    address, subaddress, *value)
+
+	return err;
+}
+
+
+/* SMBus protocol: S Addr+1 Rd [A] [Value] NA P */
+static int
+w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
+			   u16 address, u8* value)
+{
+	int err = 0;
+
+	/* Serial data enable */
+	err += w9968cf_write_sb(cam, 0x0013);
+
+	err += w9968cf_smbus_start(cam);
+	err += w9968cf_smbus_write_byte(cam, address + 1);
+	err += w9968cf_smbus_read_ack(cam);
+	err += w9968cf_smbus_read_byte(cam, value);
+	err += w9968cf_smbus_write_ack(cam);
+	err += w9968cf_smbus_stop(cam);
+
+	/* Serial data disable */
+	err += w9968cf_write_sb(cam, 0x0000);
+
+	if (!err)
+		DBG(5, "I2C read byte done, addr.0x%04X, "
+		       "value 0x%02X", address, *value)
+	else
+		DBG(5, "I2C read byte failed, addr.0x%04X, "
+		       "wrong value 0x%02X", address, *value)
+
+	return err;
+}
+
+
+/* SMBus protocol: S Addr Wr [A] Value [A] P */
+static int
+w9968cf_i2c_adap_write_byte(struct w9968cf_device* cam,
+			    u16 address, u8 value)
+{
+	DBG(4, "i2c_write_byte() is an unsupported transfer mode")
+	return -EINVAL;
+}
+
+
+
+/****************************************************************************
+ * I2C interface to kernel                                                  *
+ ****************************************************************************/
+
+static int
+w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+		       unsigned short flags, char read_write, u8 command,
+		       int size, union i2c_smbus_data *data)
+{
+	struct w9968cf_device* cam = i2c_get_adapdata(adapter);
+	u8 i;
+	int err = 0;
+
+	switch (addr) {
+		case OV6xx0_SID:
+		case OV7xx0_SID:
+			break;
+		default:
+			DBG(4, "Rejected slave ID 0x%04X", addr)
+			return -EINVAL;
+	}
+
+	if (size == I2C_SMBUS_BYTE) {
+		/* Why addr <<= 1? See OVXXX0_SID defines in ovcamchip.h */
+		addr <<= 1;
+
+		if (read_write == I2C_SMBUS_WRITE)
+			err = w9968cf_i2c_adap_write_byte(cam, addr, command);
+		else if (read_write == I2C_SMBUS_READ)
+			err = w9968cf_i2c_adap_read_byte(cam,addr,&data->byte);
+
+	} else if (size == I2C_SMBUS_BYTE_DATA) {
+		addr <<= 1;
+
+		if (read_write == I2C_SMBUS_WRITE)
+			err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr,
+							  command, data->byte);
+		else if (read_write == I2C_SMBUS_READ) {
+			for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) {
+				err = w9968cf_i2c_adap_read_byte_data(cam,addr,
+							 command, &data->byte);
+				if (err) {
+					if (w9968cf_smbus_refresh_bus(cam)) {
+						err = -EIO;
+						break;
+					}
+				} else
+					break;
+			}
+
+		} else
+			return -EINVAL;
+
+	} else {
+		DBG(4, "Unsupported I2C transfer mode (%d)", size)
+		return -EINVAL;
+	}
+
+	return err;
+}
+
+
+static u32 w9968cf_i2c_func(struct i2c_adapter* adap)
+{
+	return I2C_FUNC_SMBUS_READ_BYTE |
+	       I2C_FUNC_SMBUS_READ_BYTE_DATA  |
+	       I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+}
+
+
+static int w9968cf_i2c_attach_inform(struct i2c_client* client)
+{
+	struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
+	int id = client->driver->id, err = 0;
+
+	if (id == I2C_DRIVERID_OVCAMCHIP) {
+		cam->sensor_client = client;
+		err = w9968cf_sensor_init(cam);
+		if (err) {
+			cam->sensor_client = NULL;
+			return err;
+		}
+	} else {
+		DBG(4, "Rejected client [%s] with driver [%s]",
+		    client->name, client->driver->driver.name)
+		return -EINVAL;
+	}
+
+	DBG(5, "I2C attach client [%s] with driver [%s]",
+	    client->name, client->driver->driver.name)
+
+	return 0;
+}
+
+
+static int w9968cf_i2c_detach_inform(struct i2c_client* client)
+{
+	struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
+
+	if (cam->sensor_client == client)
+		cam->sensor_client = NULL;
+
+	DBG(5, "I2C detach client [%s]", client->name)
+
+	return 0;
+}
+
+
+static int
+w9968cf_i2c_control(struct i2c_adapter* adapter, unsigned int cmd,
+		    unsigned long arg)
+{
+	return 0;
+}
+
+
+static int w9968cf_i2c_init(struct w9968cf_device* cam)
+{
+	int err = 0;
+
+	static struct i2c_algorithm algo = {
+		.smbus_xfer =    w9968cf_i2c_smbus_xfer,
+		.algo_control =  w9968cf_i2c_control,
+		.functionality = w9968cf_i2c_func,
+	};
+
+	static struct i2c_adapter adap = {
+		.id =                I2C_HW_SMBUS_W9968CF,
+		.class =             I2C_CLASS_CAM_DIGITAL,
+		.owner =             THIS_MODULE,
+		.client_register =   w9968cf_i2c_attach_inform,
+		.client_unregister = w9968cf_i2c_detach_inform,
+		.algo =              &algo,
+	};
+
+	memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter));
+	strcpy(cam->i2c_adapter.name, "w9968cf");
+	i2c_set_adapdata(&cam->i2c_adapter, cam);
+
+	DBG(6, "Registering I2C adapter with kernel...")
+
+	err = i2c_add_adapter(&cam->i2c_adapter);
+	if (err)
+		DBG(1, "Failed to register the I2C adapter")
+	else
+		DBG(5, "I2C adapter registered")
+
+	return err;
+}
+
+
+
+/****************************************************************************
+ * Helper functions                                                         *
+ ****************************************************************************/
+
+/*--------------------------------------------------------------------------
+  Turn on the LED on some webcams. A beep should be heard too.
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_turn_on_led(struct w9968cf_device* cam)
+{
+	int err = 0;
+
+	err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power-down */
+	err += w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
+	err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
+	err += w9968cf_write_reg(cam, 0x0010, 0x01); /* serial bus, SDS high */
+	err += w9968cf_write_reg(cam, 0x0000, 0x01); /* serial bus, SDS low */
+	err += w9968cf_write_reg(cam, 0x0010, 0x01); /* ..high 'beep-beep' */
+
+	if (err)
+		DBG(2, "Couldn't turn on the LED")
+
+	DBG(5, "LED turned on")
+
+	return err;
+}
+
+
+/*--------------------------------------------------------------------------
+  Write some registers for the device initialization.
+  This function is called once on open().
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_init_chip(struct w9968cf_device* cam)
+{
+	unsigned long hw_bufsize = cam->maxwidth*cam->maxheight*2,
+		      y0 = 0x0000,
+		      u0 = y0 + hw_bufsize/2,
+		      v0 = u0 + hw_bufsize/4,
+		      y1 = v0 + hw_bufsize/4,
+		      u1 = y1 + hw_bufsize/2,
+		      v1 = u1 + hw_bufsize/4;
+	int err = 0;
+
+	err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power off */
+	err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* power on */
+
+	err += w9968cf_write_reg(cam, 0x405d, 0x03); /* DRAM timings */
+	err += w9968cf_write_reg(cam, 0x0030, 0x04); /* SDRAM timings */
+
+	err += w9968cf_write_reg(cam, y0 & 0xffff, 0x20); /* Y buf.0, low */
+	err += w9968cf_write_reg(cam, y0 >> 16, 0x21);    /* Y buf.0, high */
+	err += w9968cf_write_reg(cam, u0 & 0xffff, 0x24); /* U buf.0, low */
+	err += w9968cf_write_reg(cam, u0 >> 16, 0x25);    /* U buf.0, high */
+	err += w9968cf_write_reg(cam, v0 & 0xffff, 0x28); /* V buf.0, low */
+	err += w9968cf_write_reg(cam, v0 >> 16, 0x29);    /* V buf.0, high */
+
+	err += w9968cf_write_reg(cam, y1 & 0xffff, 0x22); /* Y buf.1, low */
+	err += w9968cf_write_reg(cam, y1 >> 16, 0x23);    /* Y buf.1, high */
+	err += w9968cf_write_reg(cam, u1 & 0xffff, 0x26); /* U buf.1, low */
+	err += w9968cf_write_reg(cam, u1 >> 16, 0x27);    /* U buf.1, high */
+	err += w9968cf_write_reg(cam, v1 & 0xffff, 0x2a); /* V buf.1, low */
+	err += w9968cf_write_reg(cam, v1 >> 16, 0x2b);    /* V buf.1, high */
+
+	err += w9968cf_write_reg(cam, y1 & 0xffff, 0x32); /* JPEG buf 0 low */
+	err += w9968cf_write_reg(cam, y1 >> 16, 0x33);    /* JPEG buf 0 high */
+
+	err += w9968cf_write_reg(cam, y1 & 0xffff, 0x34); /* JPEG buf 1 low */
+	err += w9968cf_write_reg(cam, y1 >> 16, 0x35);    /* JPEG bug 1 high */
+
+	err += w9968cf_write_reg(cam, 0x0000, 0x36);/* JPEG restart interval */
+	err += w9968cf_write_reg(cam, 0x0804, 0x37);/*JPEG VLE FIFO threshold*/
+	err += w9968cf_write_reg(cam, 0x0000, 0x38);/* disable hw up-scaling */
+	err += w9968cf_write_reg(cam, 0x0000, 0x3f); /* JPEG/MCTL test data */
+
+	err += w9968cf_set_picture(cam, cam->picture); /* this before */
+	err += w9968cf_set_window(cam, cam->window);
+
+	if (err)
+		DBG(1, "Chip initialization failed")
+	else
+		DBG(5, "Chip successfully initialized")
+
+	return err;
+}
+
+
+/*--------------------------------------------------------------------------
+  Return non-zero if the palette is supported, 0 otherwise.
+  --------------------------------------------------------------------------*/
+static inline u16 w9968cf_valid_palette(u16 palette)
+{
+	u8 i = 0;
+	while (w9968cf_formatlist[i].palette != 0) {
+		if (palette == w9968cf_formatlist[i].palette)
+			return palette;
+		i++;
+	}
+	return 0;
+}
+
+
+/*--------------------------------------------------------------------------
+  Return the depth corresponding to the given palette.
+  Palette _must_ be supported !
+  --------------------------------------------------------------------------*/
+static inline u16 w9968cf_valid_depth(u16 palette)
+{
+	u8 i=0;
+	while (w9968cf_formatlist[i].palette != palette)
+		i++;
+
+	return w9968cf_formatlist[i].depth;
+}
+
+
+/*--------------------------------------------------------------------------
+  Return non-zero if the format requires decompression, 0 otherwise.
+  --------------------------------------------------------------------------*/
+static inline u8 w9968cf_need_decompression(u16 palette)
+{
+	u8 i = 0;
+	while (w9968cf_formatlist[i].palette != 0) {
+		if (palette == w9968cf_formatlist[i].palette)
+			return w9968cf_formatlist[i].compression;
+		i++;
+	}
+	return 0;
+}
+
+
+/*--------------------------------------------------------------------------
+  Change the picture settings of the camera.
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int
+w9968cf_set_picture(struct w9968cf_device* cam, struct video_picture pict)
+{
+	u16 fmt, hw_depth, hw_palette, reg_v = 0x0000;
+	int err = 0;
+
+	/* Make sure we are using a valid depth */
+	pict.depth = w9968cf_valid_depth(pict.palette);
+
+	fmt = pict.palette;
+
+	hw_depth = pict.depth; /* depth used by the winbond chip */
+	hw_palette = pict.palette; /* palette used by the winbond chip */
+
+	/* VS & HS polarities */
+	reg_v = (cam->vs_polarity << 12) | (cam->hs_polarity << 11);
+
+	switch (fmt)
+	{
+		case VIDEO_PALETTE_UYVY:
+			reg_v |= 0x0000;
+			cam->vpp_flag = VPP_NONE;
+			break;
+		case VIDEO_PALETTE_YUV422P:
+			reg_v |= 0x0002;
+			cam->vpp_flag = VPP_DECOMPRESSION;
+			break;
+		case VIDEO_PALETTE_YUV420:
+		case VIDEO_PALETTE_YUV420P:
+			reg_v |= 0x0003;
+			cam->vpp_flag = VPP_DECOMPRESSION;
+			break;
+		case VIDEO_PALETTE_YUYV:
+		case VIDEO_PALETTE_YUV422:
+			reg_v |= 0x0000;
+			cam->vpp_flag = VPP_SWAP_YUV_BYTES;
+			hw_palette = VIDEO_PALETTE_UYVY;
+			break;
+		/* Original video is used instead of RGBX palettes.
+		   Software conversion later. */
+		case VIDEO_PALETTE_GREY:
+		case VIDEO_PALETTE_RGB555:
+		case VIDEO_PALETTE_RGB565:
+		case VIDEO_PALETTE_RGB24:
+		case VIDEO_PALETTE_RGB32:
+			reg_v |= 0x0000; /* UYVY 16 bit is used */
+			hw_depth = 16;
+			hw_palette = VIDEO_PALETTE_UYVY;
+			cam->vpp_flag = VPP_UYVY_TO_RGBX;
+			break;
+	}
+
+	/* NOTE: due to memory issues, it is better to disable the hardware
+		 double buffering during compression */
+	if (cam->double_buffer && !(cam->vpp_flag & VPP_DECOMPRESSION))
+		reg_v |= 0x0080;
+
+	if (cam->clamping)
+		reg_v |= 0x0020;
+
+	if (cam->filter_type == 1)
+		reg_v |= 0x0008;
+	else if (cam->filter_type == 2)
+		reg_v |= 0x000c;
+
+	if ((err = w9968cf_write_reg(cam, reg_v, 0x16)))
+		goto error;
+
+	if ((err = w9968cf_sensor_update_picture(cam, pict)))
+		goto error;
+
+	/* If all went well, update the device data structure */
+	memcpy(&cam->picture, &pict, sizeof(pict));
+	cam->hw_depth = hw_depth;
+	cam->hw_palette = hw_palette;
+
+	/* Settings changed, so we clear the frame buffers */
+	memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
+
+	DBG(4, "Palette is %s, depth is %u bpp",
+	    symbolic(v4l1_plist, pict.palette), pict.depth)
+
+	return 0;
+
+error:
+	DBG(1, "Failed to change picture settings")
+	return err;
+}
+
+
+/*--------------------------------------------------------------------------
+  Change the capture area size of the camera.
+  This function _must_ be called _after_ w9968cf_set_picture().
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int
+w9968cf_set_window(struct w9968cf_device* cam, struct video_window win)
+{
+	u16 x, y, w, h, scx, scy, cw, ch, ax, ay;
+	unsigned long fw, fh;
+	struct ovcamchip_window s_win;
+	int err = 0;
+
+	/* Work around to avoid FP arithmetics */
+	#define __SC(x) ((x) << 10)
+	#define __UNSC(x) ((x) >> 10)
+
+	/* Make sure we are using a supported resolution */
+	if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
+					      (u16*)&win.height)))
+		goto error;
+
+	/* Scaling factors */
+	fw = __SC(win.width) / cam->maxwidth;
+	fh = __SC(win.height) / cam->maxheight;
+
+	/* Set up the width and height values used by the chip */
+	if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) {
+		cam->vpp_flag |= VPP_UPSCALE;
+		/* Calculate largest w,h mantaining the same w/h ratio */
+		w = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh;
+		h = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight;
+		if (w < cam->minwidth) /* just in case */
+			w = cam->minwidth;
+		if (h < cam->minheight) /* just in case */
+			h = cam->minheight;
+	} else {
+		cam->vpp_flag &= ~VPP_UPSCALE;
+		w = win.width;
+		h = win.height;
+	}
+
+	/* x,y offsets of the cropped area */
+	scx = cam->start_cropx;
+	scy = cam->start_cropy;
+
+	/* Calculate cropped area manteining the right w/h ratio */
+	if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) {
+		cw = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh;
+		ch = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight;
+	} else {
+		cw = w;
+		ch = h;
+	}
+
+	/* Setup the window of the sensor */
+	s_win.format = VIDEO_PALETTE_UYVY;
+	s_win.width = cam->maxwidth;
+	s_win.height = cam->maxheight;
+	s_win.quarter = 0; /* full progressive video */
+
+	/* Center it */
+	s_win.x = (s_win.width - cw) / 2;
+	s_win.y = (s_win.height - ch) / 2;
+
+	/* Clock divisor */
+	if (cam->clockdiv >= 0)
+		s_win.clockdiv = cam->clockdiv; /* manual override */
+	else
+		switch (cam->sensor) {
+			case CC_OV6620:
+				s_win.clockdiv = 0;
+				break;
+			case CC_OV6630:
+				s_win.clockdiv = 0;
+				break;
+			case CC_OV76BE:
+			case CC_OV7610:
+			case CC_OV7620:
+				s_win.clockdiv = 0;
+				break;
+			default:
+				s_win.clockdiv = W9968CF_DEF_CLOCKDIVISOR;
+		}
+
+	/* We have to scale win.x and win.y offsets */
+	if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
+	     || (cam->vpp_flag & VPP_UPSCALE) ) {
+		ax = __SC(win.x)/fw;
+		ay = __SC(win.y)/fh;
+	} else {
+		ax = win.x;
+		ay = win.y;
+	}
+
+	if ((ax + cw) > cam->maxwidth)
+		ax = cam->maxwidth - cw;
+
+	if ((ay + ch) > cam->maxheight)
+		ay = cam->maxheight - ch;
+
+	/* Adjust win.x, win.y */
+	if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
+	     || (cam->vpp_flag & VPP_UPSCALE) ) {
+		win.x = __UNSC(ax*fw);
+		win.y = __UNSC(ay*fh);
+	} else {
+		win.x = ax;
+		win.y = ay;
+	}
+
+	/* Offsets used by the chip */
+	x = ax + s_win.x;
+	y = ay + s_win.y;
+
+	/* Go ! */
+	if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_MODE, &s_win)))
+		goto error;
+
+	err += w9968cf_write_reg(cam, scx + x, 0x10);
+	err += w9968cf_write_reg(cam, scy + y, 0x11);
+	err += w9968cf_write_reg(cam, scx + x + cw, 0x12);
+	err += w9968cf_write_reg(cam, scy + y + ch, 0x13);
+	err += w9968cf_write_reg(cam, w, 0x14);
+	err += w9968cf_write_reg(cam, h, 0x15);
+
+	/* JPEG width & height */
+	err += w9968cf_write_reg(cam, w, 0x30);
+	err += w9968cf_write_reg(cam, h, 0x31);
+
+	/* Y & UV frame buffer strides (in WORD) */
+	if (cam->vpp_flag & VPP_DECOMPRESSION) {
+		err += w9968cf_write_reg(cam, w/2, 0x2c);
+		err += w9968cf_write_reg(cam, w/4, 0x2d);
+	} else
+		err += w9968cf_write_reg(cam, w, 0x2c);
+
+	if (err)
+		goto error;
+
+	/* If all went well, update the device data structure */
+	memcpy(&cam->window, &win, sizeof(win));
+	cam->hw_width = w;
+	cam->hw_height = h;
+
+	/* Settings changed, so we clear the frame buffers */
+	memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
+
+	DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)",
+	    win.width, win.height, win.x, win.y)
+
+	PDBGG("x=%u ,y=%u, w=%u, h=%u, ax=%u, ay=%u, s_win.x=%u, s_win.y=%u, "
+	      "cw=%u, ch=%u, win.x=%u, win.y=%u, win.width=%u, win.height=%u",
+	      x, y, w, h, ax, ay, s_win.x, s_win.y, cw, ch, win.x, win.y,
+	      win.width, win.height)
+
+	return 0;
+
+error:
+	DBG(1, "Failed to change the capture area size")
+	return err;
+}
+
+
+/*--------------------------------------------------------------------------
+  Adjust the asked values for window width and height.
+  Return 0 on success, -1 otherwise.
+  --------------------------------------------------------------------------*/
+static int
+w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height)
+{
+	u16 maxw, maxh;
+
+	if ((*width < cam->minwidth) || (*height < cam->minheight))
+		return -ERANGE;
+
+	maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
+	       w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
+			   : cam->maxwidth;
+	maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
+	       w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
+			   : cam->maxheight;
+
+	if (*width > maxw)
+		*width = maxw;
+	if (*height > maxh)
+		*height = maxh;
+
+	if (cam->vpp_flag & VPP_DECOMPRESSION) {
+		*width  &= ~15L; /* multiple of 16 */
+		*height &= ~15L;
+	}
+
+	PDBGG("Window size adjusted w=%u, h=%u ", *width, *height)
+
+	return 0;
+}
+
+
+/*--------------------------------------------------------------------------
+  Initialize the FIFO list of requested frames.
+  --------------------------------------------------------------------------*/
+static void w9968cf_init_framelist(struct w9968cf_device* cam)
+{
+	u8 i;
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		cam->requested_frame[i] = NULL;
+		cam->frame[i].queued = 0;
+		cam->frame[i].status = F_UNUSED;
+	}
+}
+
+
+/*--------------------------------------------------------------------------
+  Add a frame in the FIFO list of requested frames.
+  This function is called in process context.
+  --------------------------------------------------------------------------*/
+static void w9968cf_push_frame(struct w9968cf_device* cam, u8 f_num)
+{
+	u8 f;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&cam->flist_lock, lock_flags);
+
+	for (f=0; cam->requested_frame[f] != NULL; f++);
+	cam->requested_frame[f] = &cam->frame[f_num];
+	cam->frame[f_num].queued = 1;
+	cam->frame[f_num].status = F_UNUSED; /* clear the status */
+
+	spin_unlock_irqrestore(&cam->flist_lock, lock_flags);
+
+	DBG(6, "Frame #%u pushed into the FIFO list. Position %u", f_num, f)
+}
+
+
+/*--------------------------------------------------------------------------
+  Read, store and remove the first pointer in the FIFO list of requested
+  frames. This function is called in interrupt context.
+  --------------------------------------------------------------------------*/
+static void
+w9968cf_pop_frame(struct w9968cf_device* cam, struct w9968cf_frame_t** framep)
+{
+	u8 i;
+
+	spin_lock(&cam->flist_lock);
+
+	*framep = cam->requested_frame[0];
+
+	/* Shift the list of pointers */
+	for (i = 0; i < cam->nbuffers-1; i++)
+		cam->requested_frame[i] = cam->requested_frame[i+1];
+	cam->requested_frame[i] = NULL;
+
+	spin_unlock(&cam->flist_lock);
+
+	DBG(6,"Popped frame #%d from the list", (*framep)->number)
+}
+
+
+/*--------------------------------------------------------------------------
+  High-level video post-processing routine on grabbed frames.
+  Return 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int
+w9968cf_postprocess_frame(struct w9968cf_device* cam,
+			  struct w9968cf_frame_t* fr)
+{
+	void *pIn = fr->buffer, *pOut = cam->frame_vpp.buffer, *tmp;
+	u16 w = cam->window.width,
+	    h = cam->window.height,
+	    d = cam->picture.depth,
+	    fmt = cam->picture.palette,
+	    rgb = cam->force_rgb,
+	    hw_w = cam->hw_width,
+	    hw_h = cam->hw_height,
+	    hw_d = cam->hw_depth;
+	int err = 0;
+
+	#define _PSWAP(pIn, pOut) {tmp = (pIn); (pIn) = (pOut); (pOut) = tmp;}
+
+	if (cam->vpp_flag & VPP_DECOMPRESSION) {
+		memcpy(pOut, pIn, fr->length);
+		_PSWAP(pIn, pOut)
+		err = w9968cf_vpp->decode(pIn, fr->length, hw_w, hw_h, pOut);
+		PDBGG("Compressed frame length: %lu",(unsigned long)fr->length)
+		fr->length = (hw_w*hw_h*hw_d)/8;
+		_PSWAP(pIn, pOut)
+		if (err) {
+			DBG(4, "An error occurred while decoding the frame: "
+			       "%s", symbolic(decoder_errlist, err))
+			return err;
+		} else
+			DBG(6, "Frame decoded")
+	}
+
+	if (cam->vpp_flag & VPP_SWAP_YUV_BYTES) {
+		w9968cf_vpp->swap_yuvbytes(pIn, fr->length);
+		DBG(6, "Original UYVY component ordering changed")
+	}
+
+	if (cam->vpp_flag & VPP_UPSCALE) {
+		w9968cf_vpp->scale_up(pIn, pOut, hw_w, hw_h, hw_d, w, h);
+		fr->length = (w*h*hw_d)/8;
+		_PSWAP(pIn, pOut)
+		DBG(6, "Vertical up-scaling done: %u,%u,%ubpp->%u,%u",
+		    hw_w, hw_h, hw_d, w, h)
+	}
+
+	if (cam->vpp_flag & VPP_UYVY_TO_RGBX) {
+		w9968cf_vpp->uyvy_to_rgbx(pIn, fr->length, pOut, fmt, rgb);
+		fr->length = (w*h*d)/8;
+		_PSWAP(pIn, pOut)
+		DBG(6, "UYVY-16bit to %s conversion done",
+		    symbolic(v4l1_plist, fmt))
+	}
+
+	if (pOut == fr->buffer)
+		memcpy(fr->buffer, cam->frame_vpp.buffer, fr->length);
+
+	return 0;
+}
+
+
+
+/****************************************************************************
+ * Image sensor control routines                                            *
+ ****************************************************************************/
+
+static int
+w9968cf_sensor_set_control(struct w9968cf_device* cam, int cid, int val)
+{
+	struct ovcamchip_control ctl;
+	int err;
+
+	ctl.id = cid;
+	ctl.value = val;
+
+	err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_CTRL, &ctl);
+
+	return err;
+}
+
+
+static int
+w9968cf_sensor_get_control(struct w9968cf_device* cam, int cid, int* val)
+{
+	struct ovcamchip_control ctl;
+	int err;
+
+	ctl.id = cid;
+
+	err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_G_CTRL, &ctl);
+	if (!err)
+		*val = ctl.value;
+
+	return err;
+}
+
+
+static int
+w9968cf_sensor_cmd(struct w9968cf_device* cam, unsigned int cmd, void* arg)
+{
+	struct i2c_client* c = cam->sensor_client;
+	int rc = 0;
+
+	if (!c || !c->driver || !c->driver->command)
+		return -EINVAL;
+
+	rc = c->driver->command(c, cmd, arg);
+	/* The I2C driver returns -EPERM on non-supported controls */
+	return (rc < 0 && rc != -EPERM) ? rc : 0;
+}
+
+
+/*--------------------------------------------------------------------------
+  Update some settings of the image sensor.
+  Returns: 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_sensor_update_settings(struct w9968cf_device* cam)
+{
+	int err = 0;
+
+	/* Auto brightness */
+	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT,
+					 cam->auto_brt);
+	if (err)
+		return err;
+
+	/* Auto exposure */
+	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP,
+					 cam->auto_exp);
+	if (err)
+		return err;
+
+	/* Banding filter */
+	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT,
+					 cam->bandfilt);
+	if (err)
+		return err;
+
+	/* Light frequency */
+	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_FREQ,
+					 cam->lightfreq);
+	if (err)
+		return err;
+
+	/* Back light */
+	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BACKLIGHT,
+					 cam->backlight);
+	if (err)
+		return err;
+
+	/* Mirror */
+	err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_MIRROR,
+					 cam->mirror);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+
+/*--------------------------------------------------------------------------
+  Get some current picture settings from the image sensor and update the
+  internal 'picture' structure of the camera.
+  Returns: 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_sensor_get_picture(struct w9968cf_device* cam)
+{
+	int err, v;
+
+	err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_CONT, &v);
+	if (err)
+		return err;
+	cam->picture.contrast = v;
+
+	err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_BRIGHT, &v);
+	if (err)
+		return err;
+	cam->picture.brightness = v;
+
+	err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_SAT, &v);
+	if (err)
+		return err;
+	cam->picture.colour = v;
+
+	err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_HUE, &v);
+	if (err)
+		return err;
+	cam->picture.hue = v;
+
+	DBG(5, "Got picture settings from the image sensor")
+
+	PDBGG("Brightness, contrast, hue, colour, whiteness are "
+	      "%u,%u,%u,%u,%u", cam->picture.brightness,cam->picture.contrast,
+	      cam->picture.hue, cam->picture.colour, cam->picture.whiteness)
+
+	return 0;
+}
+
+
+/*--------------------------------------------------------------------------
+  Update picture settings of the image sensor.
+  Returns: 0 on success, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int
+w9968cf_sensor_update_picture(struct w9968cf_device* cam,
+			      struct video_picture pict)
+{
+	int err = 0;
+
+	if ((!cam->sensor_initialized)
+	    || pict.contrast != cam->picture.contrast) {
+		err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_CONT,
+						 pict.contrast);
+		if (err)
+			goto fail;
+		DBG(4, "Contrast changed from %u to %u",
+		    cam->picture.contrast, pict.contrast)
+		cam->picture.contrast = pict.contrast;
+	}
+
+	if (((!cam->sensor_initialized) ||
+	    pict.brightness != cam->picture.brightness) && (!cam->auto_brt)) {
+		err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT,
+						 pict.brightness);
+		if (err)
+			goto fail;
+		DBG(4, "Brightness changed from %u to %u",
+		    cam->picture.brightness, pict.brightness)
+		cam->picture.brightness = pict.brightness;
+	}
+
+	if ((!cam->sensor_initialized) || pict.colour != cam->picture.colour) {
+		err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT,
+						 pict.colour);
+		if (err)
+			goto fail;
+		DBG(4, "Colour changed from %u to %u",
+		    cam->picture.colour, pict.colour)
+		cam->picture.colour = pict.colour;
+	}
+
+	if ((!cam->sensor_initialized) || pict.hue != cam->picture.hue) {
+		err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE,
+						 pict.hue);
+		if (err)
+			goto fail;
+		DBG(4, "Hue changed from %u to %u",
+		    cam->picture.hue, pict.hue)
+		cam->picture.hue = pict.hue;
+	}
+
+	return 0;
+
+fail:
+	DBG(4, "Failed to change sensor picture setting")
+	return err;
+}
+
+
+
+/****************************************************************************
+ * Camera configuration                                                     *
+ ****************************************************************************/
+
+/*--------------------------------------------------------------------------
+  This function is called when a supported image sensor is detected.
+  Return 0 if the initialization succeeds, a negative number otherwise.
+  --------------------------------------------------------------------------*/
+static int w9968cf_sensor_init(struct w9968cf_device* cam)
+{
+	int err = 0;
+
+	if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE,
+				      &cam->monochrome)))
+		goto error;
+
+	if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE,
+				      &cam->sensor)))
+		goto error;
+
+	/* NOTE: Make sure width and height are a multiple of 16 */
+	switch (cam->sensor_client->addr) {
+		case OV6xx0_SID:
+			cam->maxwidth = 352;
+			cam->maxheight = 288;
+			cam->minwidth = 64;
+			cam->minheight = 48;
+			break;
+		case OV7xx0_SID:
+			cam->maxwidth = 640;
+			cam->maxheight = 480;
+			cam->minwidth = 64;
+			cam->minheight = 48;
+			break;
+		default:
+			DBG(1, "Not supported image sensor detected for %s",
+			    symbolic(camlist, cam->id))
+			return -EINVAL;
+	}
+
+	/* These values depend on the ones in the ovxxx0.c sources */
+	switch (cam->sensor) {
+		case CC_OV7620:
+			cam->start_cropx = 287;
+			cam->start_cropy = 35;
+			/* Seems to work around a bug in the image sensor */
+			cam->vs_polarity = 1;
+			cam->hs_polarity = 1;
+			break;
+		default:
+			cam->start_cropx = 320;
+			cam->start_cropy = 35;
+			cam->vs_polarity = 1;
+			cam->hs_polarity = 0;
+	}
+
+	if ((err = w9968cf_sensor_update_settings(cam)))
+		goto error;
+
+	if ((err = w9968cf_sensor_update_picture(cam, cam->picture)))
+		goto error;
+
+	cam->sensor_initialized = 1;
+
+	DBG(2, "%s image sensor initialized", symbolic(senlist, cam->sensor))
+	return 0;
+
+error:
+	cam->sensor_initialized = 0;
+	cam->sensor = CC_UNKNOWN;
+	DBG(1, "Image sensor initialization failed for %s (/dev/video%d). "
+	       "Try to detach and attach this device again",
+	    symbolic(camlist, cam->id), cam->v4ldev->minor)
+	return err;
+}
+
+
+/*--------------------------------------------------------------------------
+  Fill some basic fields in the main device data structure.
+  This function is called once on w9968cf_usb_probe() for each recognized
+  camera.
+  --------------------------------------------------------------------------*/
+static void
+w9968cf_configure_camera(struct w9968cf_device* cam,
+			 struct usb_device* udev,
+			 enum w9968cf_model_id mod_id,
+			 const unsigned short dev_nr)
+{
+	mutex_init(&cam->fileop_mutex);
+	init_waitqueue_head(&cam->open);
+	spin_lock_init(&cam->urb_lock);
+	spin_lock_init(&cam->flist_lock);
+
+	cam->users = 0;
+	cam->disconnected = 0;
+	cam->id = mod_id;
+	cam->sensor = CC_UNKNOWN;
+	cam->sensor_initialized = 0;
+
+	/* Calculate the alternate setting number (from 1 to 16)
+	   according to the 'packet_size' module parameter */
+	if (packet_size[dev_nr] < W9968CF_MIN_PACKET_SIZE)
+		packet_size[dev_nr] = W9968CF_MIN_PACKET_SIZE;
+	for (cam->altsetting = 1;
+	     packet_size[dev_nr] < wMaxPacketSize[cam->altsetting-1];
+	     cam->altsetting++);
+
+	cam->max_buffers = (max_buffers[dev_nr] < 2 ||
+			    max_buffers[dev_nr] > W9968CF_MAX_BUFFERS)
+			   ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr];
+
+	cam->double_buffer = (double_buffer[dev_nr] == 0 ||
+			      double_buffer[dev_nr] == 1)
+			     ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER;
+
+	cam->clamping = (clamping[dev_nr] == 0 || clamping[dev_nr] == 1)
+			? (u8)clamping[dev_nr] : W9968CF_CLAMPING;
+
+	cam->filter_type = (filter_type[dev_nr] == 0 ||
+			    filter_type[dev_nr] == 1 ||
+			    filter_type[dev_nr] == 2)
+			   ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE;
+
+	cam->capture = 1;
+
+	cam->largeview = (largeview[dev_nr] == 0 || largeview[dev_nr] == 1)
+			 ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW;
+
+	cam->decompression = (decompression[dev_nr] == 0 ||
+			      decompression[dev_nr] == 1 ||
+			      decompression[dev_nr] == 2)
+			     ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION;
+
+	cam->upscaling = (upscaling[dev_nr] == 0 ||
+			  upscaling[dev_nr] == 1)
+			 ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING;
+
+	cam->auto_brt = (autobright[dev_nr] == 0 || autobright[dev_nr] == 1)
+			? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT;
+
+	cam->auto_exp = (autoexp[dev_nr] == 0 || autoexp[dev_nr] == 1)
+			? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP;
+
+	cam->lightfreq = (lightfreq[dev_nr] == 50 || lightfreq[dev_nr] == 60)
+			 ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ;
+
+	cam->bandfilt = (bandingfilter[dev_nr] == 0 ||
+			 bandingfilter[dev_nr] == 1)
+			? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER;
+
+	cam->backlight = (backlight[dev_nr] == 0 || backlight[dev_nr] == 1)
+			 ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT;
+
+	cam->clockdiv = (clockdiv[dev_nr] == -1 || clockdiv[dev_nr] >= 0)
+			? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV;
+
+	cam->mirror = (mirror[dev_nr] == 0 || mirror[dev_nr] == 1)
+		      ? (u8)mirror[dev_nr] : W9968CF_MIRROR;
+
+	cam->monochrome = (monochrome[dev_nr] == 0 || monochrome[dev_nr] == 1)
+			  ? monochrome[dev_nr] : W9968CF_MONOCHROME;
+
+	cam->picture.brightness = (u16)brightness[dev_nr];
+	cam->picture.hue = (u16)hue[dev_nr];
+	cam->picture.colour = (u16)colour[dev_nr];
+	cam->picture.contrast = (u16)contrast[dev_nr];
+	cam->picture.whiteness = (u16)whiteness[dev_nr];
+	if (w9968cf_valid_palette((u16)force_palette[dev_nr])) {
+		cam->picture.palette = (u16)force_palette[dev_nr];
+		cam->force_palette = 1;
+	} else {
+		cam->force_palette = 0;
+		if (cam->decompression == 0)
+			cam->picture.palette = W9968CF_PALETTE_DECOMP_OFF;
+		else if (cam->decompression == 1)
+			cam->picture.palette = W9968CF_PALETTE_DECOMP_FORCE;
+		else
+			cam->picture.palette = W9968CF_PALETTE_DECOMP_ON;
+	}
+	cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
+
+	cam->force_rgb = (force_rgb[dev_nr] == 0 || force_rgb[dev_nr] == 1)
+			 ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB;
+
+	cam->window.x = 0;
+	cam->window.y = 0;
+	cam->window.width = W9968CF_WIDTH;
+	cam->window.height = W9968CF_HEIGHT;
+	cam->window.chromakey = 0;
+	cam->window.clipcount = 0;
+	cam->window.flags = 0;
+
+	DBG(3, "%s configured with settings #%u:",
+	    symbolic(camlist, cam->id), dev_nr)
+
+	DBG(3, "- Data packet size for USB isochrnous transfer: %u bytes",
+	    wMaxPacketSize[cam->altsetting-1])
+
+	DBG(3, "- Number of requested video frame buffers: %u",
+	    cam->max_buffers)
+
+	if (cam->double_buffer)
+		DBG(3, "- Hardware double buffering enabled")
+	else
+		DBG(3, "- Hardware double buffering disabled")
+
+	if (cam->filter_type == 0)
+		DBG(3, "- Video filtering disabled")
+	else if (cam->filter_type == 1)
+		DBG(3, "- Video filtering enabled: type 1-2-1")
+	else if (cam->filter_type == 2)
+		DBG(3, "- Video filtering enabled: type 2-3-6-3-2")
+
+	if (cam->clamping)
+		DBG(3, "- Video data clamping (CCIR-601 format) enabled")
+	else
+		DBG(3, "- Video data clamping (CCIR-601 format) disabled")
+
+	if (cam->largeview)
+		DBG(3, "- Large view enabled")
+	else
+		DBG(3, "- Large view disabled")
+
+	if ((cam->decompression) == 0 && (!cam->force_palette))
+		DBG(3, "- Decompression disabled")
+	else if ((cam->decompression) == 1 && (!cam->force_palette))
+		DBG(3, "- Decompression forced")
+	else if ((cam->decompression) == 2 && (!cam->force_palette))
+		DBG(3, "- Decompression allowed")
+
+	if (cam->upscaling)
+		DBG(3, "- Software image scaling enabled")
+	else
+		DBG(3, "- Software image scaling disabled")
+
+	if (cam->force_palette)
+		DBG(3, "- Image palette forced to %s",
+		    symbolic(v4l1_plist, cam->picture.palette))
+
+	if (cam->force_rgb)
+		DBG(3, "- RGB component ordering will be used instead of BGR")
+
+	if (cam->auto_brt)
+		DBG(3, "- Auto brightness enabled")
+	else
+		DBG(3, "- Auto brightness disabled")
+
+	if (cam->auto_exp)
+		DBG(3, "- Auto exposure enabled")
+	else
+		DBG(3, "- Auto exposure disabled")
+
+	if (cam->backlight)
+		DBG(3, "- Backlight exposure algorithm enabled")
+	else
+		DBG(3, "- Backlight exposure algorithm disabled")
+
+	if (cam->mirror)
+		DBG(3, "- Mirror enabled")
+	else
+		DBG(3, "- Mirror disabled")
+
+	if (cam->bandfilt)
+		DBG(3, "- Banding filter enabled")
+	else
+		DBG(3, "- Banding filter disabled")
+
+	DBG(3, "- Power lighting frequency: %u", cam->lightfreq)
+
+	if (cam->clockdiv == -1)
+		DBG(3, "- Automatic clock divisor enabled")
+	else
+		DBG(3, "- Clock divisor: %d", cam->clockdiv)
+
+	if (cam->monochrome)
+		DBG(3, "- Image sensor used as monochrome")
+	else
+		DBG(3, "- Image sensor not used as monochrome")
+}
+
+
+/*--------------------------------------------------------------------------
+  If the video post-processing module is not loaded, some parameters
+  must be overridden.
+  --------------------------------------------------------------------------*/
+static void w9968cf_adjust_configuration(struct w9968cf_device* cam)
+{
+	if (!w9968cf_vpp) {
+		if (cam->decompression == 1) {
+			cam->decompression = 2;
+			DBG(2, "Video post-processing module not found: "
+			       "'decompression' parameter forced to 2")
+		}
+		if (cam->upscaling) {
+			cam->upscaling = 0;
+			DBG(2, "Video post-processing module not found: "
+			       "'upscaling' parameter forced to 0")
+		}
+		if (cam->picture.palette != VIDEO_PALETTE_UYVY) {
+			cam->force_palette = 0;
+			DBG(2, "Video post-processing module not found: "
+			       "'force_palette' parameter forced to 0")
+		}
+		cam->picture.palette = VIDEO_PALETTE_UYVY;
+		cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
+	}
+}
+
+
+/*--------------------------------------------------------------------------
+  Release the resources used by the driver.
+  This function is called on disconnect
+  (or on close if deallocation has been deferred)
+  --------------------------------------------------------------------------*/
+static void w9968cf_release_resources(struct w9968cf_device* cam)
+{
+	mutex_lock(&w9968cf_devlist_mutex);
+
+	DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor)
+
+	video_unregister_device(cam->v4ldev);
+	list_del(&cam->v4llist);
+	i2c_del_adapter(&cam->i2c_adapter);
+	w9968cf_deallocate_memory(cam);
+	kfree(cam->control_buffer);
+	kfree(cam->data_buffer);
+
+	mutex_unlock(&w9968cf_devlist_mutex);
+}
+
+
+
+/****************************************************************************
+ * Video4Linux interface                                                    *
+ ****************************************************************************/
+
+static int w9968cf_open(struct inode* inode, struct file* filp)
+{
+	struct w9968cf_device* cam;
+	int err;
+
+	/* This the only safe way to prevent race conditions with disconnect */
+	if (!down_read_trylock(&w9968cf_disconnect))
+		return -ERESTARTSYS;
+
+	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
+
+	mutex_lock(&cam->dev_mutex);
+
+	if (cam->sensor == CC_UNKNOWN) {
+		DBG(2, "No supported image sensor has been detected by the "
+		       "'ovcamchip' module for the %s (/dev/video%d). Make "
+		       "sure it is loaded *before* (re)connecting the camera.",
+		    symbolic(camlist, cam->id), cam->v4ldev->minor)
+		mutex_unlock(&cam->dev_mutex);
+		up_read(&w9968cf_disconnect);
+		return -ENODEV;
+	}
+
+	if (cam->users) {
+		DBG(2, "%s (/dev/video%d) has been already occupied by '%s'",
+		    symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command)
+		if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) {
+			mutex_unlock(&cam->dev_mutex);
+			up_read(&w9968cf_disconnect);
+			return -EWOULDBLOCK;
+		}
+		mutex_unlock(&cam->dev_mutex);
+		err = wait_event_interruptible_exclusive(cam->open,
+							 cam->disconnected ||
+							 !cam->users);
+		if (err) {
+			up_read(&w9968cf_disconnect);
+			return err;
+		}
+		if (cam->disconnected) {
+			up_read(&w9968cf_disconnect);
+			return -ENODEV;
+		}
+		mutex_lock(&cam->dev_mutex);
+	}
+
+	DBG(5, "Opening '%s', /dev/video%d ...",
+	    symbolic(camlist, cam->id), cam->v4ldev->minor)
+
+	cam->streaming = 0;
+	cam->misconfigured = 0;
+
+	w9968cf_adjust_configuration(cam);
+
+	if ((err = w9968cf_allocate_memory(cam)))
+		goto deallocate_memory;
+
+	if ((err = w9968cf_init_chip(cam)))
+		goto deallocate_memory;
+
+	if ((err = w9968cf_start_transfer(cam)))
+		goto deallocate_memory;
+
+	filp->private_data = cam;
+
+	cam->users++;
+	strcpy(cam->command, current->comm);
+
+	init_waitqueue_head(&cam->wait_queue);
+
+	DBG(5, "Video device is open")
+
+	mutex_unlock(&cam->dev_mutex);
+	up_read(&w9968cf_disconnect);
+
+	return 0;
+
+deallocate_memory:
+	w9968cf_deallocate_memory(cam);
+	DBG(2, "Failed to open the video device")
+	mutex_unlock(&cam->dev_mutex);
+	up_read(&w9968cf_disconnect);
+	return err;
+}
+
+
+static int w9968cf_release(struct inode* inode, struct file* filp)
+{
+	struct w9968cf_device* cam;
+
+	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
+
+	mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */
+
+	w9968cf_stop_transfer(cam);
+
+	if (cam->disconnected) {
+		w9968cf_release_resources(cam);
+		mutex_unlock(&cam->dev_mutex);
+		kfree(cam);
+		return 0;
+	}
+
+	cam->users--;
+	w9968cf_deallocate_memory(cam);
+	wake_up_interruptible_nr(&cam->open, 1);
+
+	DBG(5, "Video device closed")
+	mutex_unlock(&cam->dev_mutex);
+	return 0;
+}
+
+
+static ssize_t
+w9968cf_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
+{
+	struct w9968cf_device* cam;
+	struct w9968cf_frame_t* fr;
+	int err = 0;
+
+	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
+
+	if (filp->f_flags & O_NONBLOCK)
+		return -EWOULDBLOCK;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->disconnected) {
+		DBG(2, "Device not present")
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->misconfigured) {
+		DBG(2, "The camera is misconfigured. Close and open it again.")
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	if (!cam->frame[0].queued)
+		w9968cf_push_frame(cam, 0);
+
+	if (!cam->frame[1].queued)
+		w9968cf_push_frame(cam, 1);
+
+	err = wait_event_interruptible(cam->wait_queue,
+				       cam->frame[0].status == F_READY ||
+				       cam->frame[1].status == F_READY ||
+				       cam->disconnected);
+	if (err) {
+		mutex_unlock(&cam->fileop_mutex);
+		return err;
+	}
+	if (cam->disconnected) {
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	fr = (cam->frame[0].status == F_READY) ? &cam->frame[0]:&cam->frame[1];
+
+	if (w9968cf_vpp)
+		w9968cf_postprocess_frame(cam, fr);
+
+	if (count > fr->length)
+		count = fr->length;
+
+	if (copy_to_user(buf, fr->buffer, count)) {
+		fr->status = F_UNUSED;
+		mutex_unlock(&cam->fileop_mutex);
+		return -EFAULT;
+	}
+	*f_pos += count;
+
+	fr->status = F_UNUSED;
+
+	DBG(5, "%zu bytes read", count)
+
+	mutex_unlock(&cam->fileop_mutex);
+	return count;
+}
+
+
+static int w9968cf_mmap(struct file* filp, struct vm_area_struct *vma)
+{
+	struct w9968cf_device* cam = (struct w9968cf_device*)
+				     video_get_drvdata(video_devdata(filp));
+	unsigned long vsize = vma->vm_end - vma->vm_start,
+		      psize = cam->nbuffers * cam->frame[0].size,
+		      start = vma->vm_start,
+		      pos = (unsigned long)cam->frame[0].buffer,
+		      page;
+
+	if (cam->disconnected) {
+		DBG(2, "Device not present")
+		return -ENODEV;
+	}
+
+	if (cam->misconfigured) {
+		DBG(2, "The camera is misconfigured. Close and open it again")
+		return -EIO;
+	}
+
+	PDBGG("mmapping %lu bytes...", vsize)
+
+	if (vsize > psize - (vma->vm_pgoff << PAGE_SHIFT))
+		return -EINVAL;
+
+	while (vsize > 0) {
+		page = vmalloc_to_pfn((void *)pos);
+		if (remap_pfn_range(vma, start, page + vma->vm_pgoff,
+						PAGE_SIZE, vma->vm_page_prot))
+			return -EAGAIN;
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		vsize -= PAGE_SIZE;
+	}
+
+	DBG(5, "mmap method successfully called")
+	return 0;
+}
+
+
+static int
+w9968cf_ioctl(struct inode* inode, struct file* filp,
+	      unsigned int cmd, unsigned long arg)
+{
+	struct w9968cf_device* cam;
+	int err;
+
+	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->disconnected) {
+		DBG(2, "Device not present")
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->misconfigured) {
+		DBG(2, "The camera is misconfigured. Close and open it again.")
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	err = w9968cf_v4l_ioctl(inode, filp, cmd, (void __user *)arg);
+
+	mutex_unlock(&cam->fileop_mutex);
+	return err;
+}
+
+
+static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp,
+			     unsigned int cmd, void __user * arg)
+{
+	struct w9968cf_device* cam;
+	const char* v4l1_ioctls[] = {
+		"?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER",
+		"GPICT", "SPICT", "CCAPTURE", "GWIN", "SWIN", "GFBUF",
+		"SFBUF", "KEY", "GFREQ", "SFREQ", "GAUDIO", "SAUDIO",
+		"SYNC", "MCAPTURE", "GMBUF", "GUNIT", "GCAPTURE", "SCAPTURE",
+		"SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE",
+		"GVBIFMT", "SVBIFMT"
+	};
+
+	#define V4L1_IOCTL(cmd) \
+		((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \
+		v4l1_ioctls[_IOC_NR((cmd))] : "?")
+
+	cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
+
+	switch (cmd) {
+
+	case VIDIOCGCAP: /* get video capability */
+	{
+		struct video_capability cap = {
+			.type = VID_TYPE_CAPTURE | VID_TYPE_SCALES,
+			.channels = 1,
+			.audios = 0,
+			.minwidth = cam->minwidth,
+			.minheight = cam->minheight,
+		};
+		sprintf(cap.name, "W996[87]CF USB Camera #%d",
+			cam->v4ldev->minor);
+		cap.maxwidth = (cam->upscaling && w9968cf_vpp)
+			       ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
+				 : cam->maxwidth;
+		cap.maxheight = (cam->upscaling && w9968cf_vpp)
+				? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
+				  : cam->maxheight;
+
+		if (copy_to_user(arg, &cap, sizeof(cap)))
+			return -EFAULT;
+
+		DBG(5, "VIDIOCGCAP successfully called")
+		return 0;
+	}
+
+	case VIDIOCGCHAN: /* get video channel informations */
+	{
+		struct video_channel chan;
+		if (copy_from_user(&chan, arg, sizeof(chan)))
+			return -EFAULT;
+
+		if (chan.channel != 0)
+			return -EINVAL;
+
+		strcpy(chan.name, "Camera");
+		chan.tuners = 0;
+		chan.flags = 0;
+		chan.type = VIDEO_TYPE_CAMERA;
+		chan.norm = VIDEO_MODE_AUTO;
+
+		if (copy_to_user(arg, &chan, sizeof(chan)))
+			return -EFAULT;
+
+		DBG(5, "VIDIOCGCHAN successfully called")
+		return 0;
+	}
+
+	case VIDIOCSCHAN: /* set active channel */
+	{
+		struct video_channel chan;
+
+		if (copy_from_user(&chan, arg, sizeof(chan)))
+			return -EFAULT;
+
+		if (chan.channel != 0)
+			return -EINVAL;
+
+		DBG(5, "VIDIOCSCHAN successfully called")
+		return 0;
+	}
+
+	case VIDIOCGPICT: /* get image properties of the picture */
+	{
+		if (w9968cf_sensor_get_picture(cam))
+			return -EIO;
+
+		if (copy_to_user(arg, &cam->picture, sizeof(cam->picture)))
+			return -EFAULT;
+
+		DBG(5, "VIDIOCGPICT successfully called")
+		return 0;
+	}
+
+	case VIDIOCSPICT: /* change picture settings */
+	{
+		struct video_picture pict;
+		int err = 0;
+
+		if (copy_from_user(&pict, arg, sizeof(pict)))
+			return -EFAULT;
+
+		if ( (cam->force_palette || !w9968cf_vpp)
+		     && pict.palette != cam->picture.palette ) {
+			DBG(4, "Palette %s rejected: only %s is allowed",
+			    symbolic(v4l1_plist, pict.palette),
+			    symbolic(v4l1_plist, cam->picture.palette))
+			return -EINVAL;
+		}
+
+		if (!w9968cf_valid_palette(pict.palette)) {
+			DBG(4, "Palette %s not supported. VIDIOCSPICT failed",
+			    symbolic(v4l1_plist, pict.palette))
+			return -EINVAL;
+		}
+
+		if (!cam->force_palette) {
+		   if (cam->decompression == 0) {
+		      if (w9968cf_need_decompression(pict.palette)) {
+			 DBG(4, "Decompression disabled: palette %s is not "
+				"allowed. VIDIOCSPICT failed",
+			     symbolic(v4l1_plist, pict.palette))
+			 return -EINVAL;
+		      }
+		   } else if (cam->decompression == 1) {
+		      if (!w9968cf_need_decompression(pict.palette)) {
+			 DBG(4, "Decompression forced: palette %s is not "
+				"allowed. VIDIOCSPICT failed",
+			     symbolic(v4l1_plist, pict.palette))
+			 return -EINVAL;
+		      }
+		   }
+		}
+
+		if (pict.depth != w9968cf_valid_depth(pict.palette)) {
+			DBG(4, "Requested depth %u bpp is not valid for %s "
+			       "palette: ignored and changed to %u bpp",
+			    pict.depth, symbolic(v4l1_plist, pict.palette),
+			    w9968cf_valid_depth(pict.palette))
+			pict.depth = w9968cf_valid_depth(pict.palette);
+		}
+
+		if (pict.palette != cam->picture.palette) {
+			if(*cam->requested_frame
+			   || cam->frame_current->queued) {
+				err = wait_event_interruptible
+				      ( cam->wait_queue,
+					cam->disconnected ||
+					(!*cam->requested_frame &&
+					 !cam->frame_current->queued) );
+				if (err)
+					return err;
+				if (cam->disconnected)
+					return -ENODEV;
+			}
+
+			if (w9968cf_stop_transfer(cam))
+				goto ioctl_fail;
+
+			if (w9968cf_set_picture(cam, pict))
+				goto ioctl_fail;
+
+			if (w9968cf_start_transfer(cam))
+				goto ioctl_fail;
+
+		} else if (w9968cf_sensor_update_picture(cam, pict))
+			return -EIO;
+
+
+		DBG(5, "VIDIOCSPICT successfully called")
+		return 0;
+	}
+
+	case VIDIOCSWIN: /* set capture area */
+	{
+		struct video_window win;
+		int err = 0;
+
+		if (copy_from_user(&win, arg, sizeof(win)))
+			return -EFAULT;
+
+		DBG(6, "VIDIOCSWIN called: clipcount=%d, flags=%u, "
+		       "x=%u, y=%u, %ux%u", win.clipcount, win.flags,
+		    win.x, win.y, win.width, win.height)
+
+		if (win.clipcount != 0 || win.flags != 0)
+			return -EINVAL;
+
+		if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
+						      (u16*)&win.height))) {
+			DBG(4, "Resolution not supported (%ux%u). "
+			       "VIDIOCSWIN failed", win.width, win.height)
+			return err;
+		}
+
+		if (win.x != cam->window.x ||
+		    win.y != cam->window.y ||
+		    win.width != cam->window.width ||
+		    win.height != cam->window.height) {
+			if(*cam->requested_frame
+			   || cam->frame_current->queued) {
+				err = wait_event_interruptible
+				      ( cam->wait_queue,
+					cam->disconnected ||
+					(!*cam->requested_frame &&
+					 !cam->frame_current->queued) );
+				if (err)
+					return err;
+				if (cam->disconnected)
+					return -ENODEV;
+			}
+
+			if (w9968cf_stop_transfer(cam))
+				goto ioctl_fail;
+
+			/* This _must_ be called before set_window() */
+			if (w9968cf_set_picture(cam, cam->picture))
+				goto ioctl_fail;
+
+			if (w9968cf_set_window(cam, win))
+				goto ioctl_fail;
+
+			if (w9968cf_start_transfer(cam))
+				goto ioctl_fail;
+		}
+
+		DBG(5, "VIDIOCSWIN successfully called. ")
+		return 0;
+	}
+
+	case VIDIOCGWIN: /* get current window properties */
+	{
+		if (copy_to_user(arg,&cam->window,sizeof(struct video_window)))
+			return -EFAULT;
+
+		DBG(5, "VIDIOCGWIN successfully called")
+		return 0;
+	}
+
+	case VIDIOCGMBUF: /* request for memory (mapped) buffer */
+	{
+		struct video_mbuf mbuf;
+		u8 i;
+
+		mbuf.size = cam->nbuffers * cam->frame[0].size;
+		mbuf.frames = cam->nbuffers;
+		for (i = 0; i < cam->nbuffers; i++)
+			mbuf.offsets[i] = (unsigned long)cam->frame[i].buffer -
+					  (unsigned long)cam->frame[0].buffer;
+
+		if (copy_to_user(arg, &mbuf, sizeof(mbuf)))
+			return -EFAULT;
+
+		DBG(5, "VIDIOCGMBUF successfully called")
+		return 0;
+	}
+
+	case VIDIOCMCAPTURE: /* start the capture to a frame */
+	{
+		struct video_mmap mmap;
+		struct w9968cf_frame_t* fr;
+		int err = 0;
+
+		if (copy_from_user(&mmap, arg, sizeof(mmap)))
+			return -EFAULT;
+
+		DBG(6, "VIDIOCMCAPTURE called: frame #%u, format=%s, %dx%d",
+		    mmap.frame, symbolic(v4l1_plist, mmap.format),
+		    mmap.width, mmap.height)
+
+		if (mmap.frame >= cam->nbuffers) {
+			DBG(4, "Invalid frame number (%u). "
+			       "VIDIOCMCAPTURE failed", mmap.frame)
+			return -EINVAL;
+		}
+
+		if (mmap.format!=cam->picture.palette &&
+		    (cam->force_palette || !w9968cf_vpp)) {
+			DBG(4, "Palette %s rejected: only %s is allowed",
+			    symbolic(v4l1_plist, mmap.format),
+			    symbolic(v4l1_plist, cam->picture.palette))
+			return -EINVAL;
+		}
+
+		if (!w9968cf_valid_palette(mmap.format)) {
+			DBG(4, "Palette %s not supported. "
+			       "VIDIOCMCAPTURE failed",
+			    symbolic(v4l1_plist, mmap.format))
+			return -EINVAL;
+		}
+
+		if (!cam->force_palette) {
+		   if (cam->decompression == 0) {
+		      if (w9968cf_need_decompression(mmap.format)) {
+			 DBG(4, "Decompression disabled: palette %s is not "
+				"allowed. VIDIOCSPICT failed",
+			     symbolic(v4l1_plist, mmap.format))
+			 return -EINVAL;
+		      }
+		   } else if (cam->decompression == 1) {
+		      if (!w9968cf_need_decompression(mmap.format)) {
+			 DBG(4, "Decompression forced: palette %s is not "
+				"allowed. VIDIOCSPICT failed",
+			     symbolic(v4l1_plist, mmap.format))
+			 return -EINVAL;
+		      }
+		   }
+		}
+
+		if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width,
+						      (u16*)&mmap.height))) {
+			DBG(4, "Resolution not supported (%dx%d). "
+			       "VIDIOCMCAPTURE failed",
+			    mmap.width, mmap.height)
+			return err;
+		}
+
+		fr = &cam->frame[mmap.frame];
+
+		if (mmap.width  != cam->window.width ||
+		    mmap.height != cam->window.height ||
+		    mmap.format != cam->picture.palette) {
+
+			struct video_window win;
+			struct video_picture pict;
+
+			if(*cam->requested_frame
+			   || cam->frame_current->queued) {
+				DBG(6, "VIDIOCMCAPTURE. Change settings for "
+				       "frame #%u: %dx%d, format %s. Wait...",
+				    mmap.frame, mmap.width, mmap.height,
+				    symbolic(v4l1_plist, mmap.format))
+				err = wait_event_interruptible
+				      ( cam->wait_queue,
+					cam->disconnected ||
+					(!*cam->requested_frame &&
+					 !cam->frame_current->queued) );
+				if (err)
+					return err;
+				if (cam->disconnected)
+					return -ENODEV;
+			}
+
+			memcpy(&win, &cam->window, sizeof(win));
+			memcpy(&pict, &cam->picture, sizeof(pict));
+			win.width = mmap.width;
+			win.height = mmap.height;
+			pict.palette = mmap.format;
+
+			if (w9968cf_stop_transfer(cam))
+				goto ioctl_fail;
+
+			/* This before set_window */
+			if (w9968cf_set_picture(cam, pict))
+				goto ioctl_fail;
+
+			if (w9968cf_set_window(cam, win))
+				goto ioctl_fail;
+
+			if (w9968cf_start_transfer(cam))
+				goto ioctl_fail;
+
+		} else 	if (fr->queued) {
+
+			DBG(6, "Wait until frame #%u is free", mmap.frame)
+
+			err = wait_event_interruptible(cam->wait_queue,
+						       cam->disconnected ||
+						       (!fr->queued));
+			if (err)
+				return err;
+			if (cam->disconnected)
+				return -ENODEV;
+		}
+
+		w9968cf_push_frame(cam, mmap.frame);
+		DBG(5, "VIDIOCMCAPTURE(%u): successfully called", mmap.frame)
+		return 0;
+	}
+
+	case VIDIOCSYNC: /* wait until the capture of a frame is finished */
+	{
+		unsigned int f_num;
+		struct w9968cf_frame_t* fr;
+		int err = 0;
+
+		if (copy_from_user(&f_num, arg, sizeof(f_num)))
+			return -EFAULT;
+
+		if (f_num >= cam->nbuffers) {
+			DBG(4, "Invalid frame number (%u). "
+			       "VIDIOCMCAPTURE failed", f_num)
+			return -EINVAL;
+		}
+
+		DBG(6, "VIDIOCSYNC called for frame #%u", f_num)
+
+		fr = &cam->frame[f_num];
+
+		switch (fr->status) {
+		case F_UNUSED:
+			if (!fr->queued) {
+				DBG(4, "VIDIOSYNC: Frame #%u not requested!",
+				    f_num)
+				return -EFAULT;
+			}
+		case F_ERROR:
+		case F_GRABBING:
+			err = wait_event_interruptible(cam->wait_queue,
+						       (fr->status == F_READY)
+						       || cam->disconnected);
+			if (err)
+				return err;
+			if (cam->disconnected)
+				return -ENODEV;
+			break;
+		case F_READY:
+			break;
+		}
+
+		if (w9968cf_vpp)
+			w9968cf_postprocess_frame(cam, fr);
+
+		fr->status = F_UNUSED;
+
+		DBG(5, "VIDIOCSYNC(%u) successfully called", f_num)
+		return 0;
+	}
+
+	case VIDIOCGUNIT:/* report the unit numbers of the associated devices*/
+	{
+		struct video_unit unit = {
+			.video = cam->v4ldev->minor,
+			.vbi = VIDEO_NO_UNIT,
+			.radio = VIDEO_NO_UNIT,
+			.audio = VIDEO_NO_UNIT,
+			.teletext = VIDEO_NO_UNIT,
+		};
+
+		if (copy_to_user(arg, &unit, sizeof(unit)))
+			return -EFAULT;
+
+		DBG(5, "VIDIOCGUNIT successfully called")
+		return 0;
+	}
+
+	case VIDIOCKEY:
+		return 0;
+
+	case VIDIOCGFBUF:
+	{
+		if (clear_user(arg, sizeof(struct video_buffer)))
+			return -EFAULT;
+
+		DBG(5, "VIDIOCGFBUF successfully called")
+		return 0;
+	}
+
+	case VIDIOCGTUNER:
+	{
+		struct video_tuner tuner;
+		if (copy_from_user(&tuner, arg, sizeof(tuner)))
+			return -EFAULT;
+
+		if (tuner.tuner != 0)
+			return -EINVAL;
+
+		strcpy(tuner.name, "no_tuner");
+		tuner.rangelow = 0;
+		tuner.rangehigh = 0;
+		tuner.flags = VIDEO_TUNER_NORM;
+		tuner.mode = VIDEO_MODE_AUTO;
+		tuner.signal = 0xffff;
+
+		if (copy_to_user(arg, &tuner, sizeof(tuner)))
+			return -EFAULT;
+
+		DBG(5, "VIDIOCGTUNER successfully called")
+		return 0;
+	}
+
+	case VIDIOCSTUNER:
+	{
+		struct video_tuner tuner;
+		if (copy_from_user(&tuner, arg, sizeof(tuner)))
+			return -EFAULT;
+
+		if (tuner.tuner != 0)
+			return -EINVAL;
+
+		if (tuner.mode != VIDEO_MODE_AUTO)
+			return -EINVAL;
+
+		DBG(5, "VIDIOCSTUNER successfully called")
+		return 0;
+	}
+
+	case VIDIOCSFBUF:
+	case VIDIOCCAPTURE:
+	case VIDIOCGFREQ:
+	case VIDIOCSFREQ:
+	case VIDIOCGAUDIO:
+	case VIDIOCSAUDIO:
+	case VIDIOCSPLAYMODE:
+	case VIDIOCSWRITEMODE:
+	case VIDIOCGPLAYINFO:
+	case VIDIOCSMICROCODE:
+	case VIDIOCGVBIFMT:
+	case VIDIOCSVBIFMT:
+		DBG(4, "Unsupported V4L1 IOCtl: VIDIOC%s "
+		       "(type 0x%01X, "
+		       "n. 0x%01X, "
+		       "dir. 0x%01X, "
+		       "size 0x%02X)",
+		    V4L1_IOCTL(cmd),
+		    _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
+
+		return -EINVAL;
+
+	default:
+		DBG(4, "Invalid V4L1 IOCtl: VIDIOC%s "
+		       "type 0x%01X, "
+		       "n. 0x%01X, "
+		       "dir. 0x%01X, "
+		       "size 0x%02X",
+		    V4L1_IOCTL(cmd),
+		    _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
+
+		return -ENOIOCTLCMD;
+
+	} /* end of switch */
+
+ioctl_fail:
+	cam->misconfigured = 1;
+	DBG(1, "VIDIOC%s failed because of hardware problems. "
+	       "To use the camera, close and open it again.", V4L1_IOCTL(cmd))
+	return -EFAULT;
+}
+
+
+static struct file_operations w9968cf_fops = {
+	.owner =   THIS_MODULE,
+	.open =    w9968cf_open,
+	.release = w9968cf_release,
+	.read =    w9968cf_read,
+	.ioctl =   w9968cf_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
+	.mmap =    w9968cf_mmap,
+	.llseek =  no_llseek,
+};
+
+
+
+/****************************************************************************
+ * USB probe and V4L registration, disconnect and id_table[] definition     *
+ ****************************************************************************/
+
+static int
+w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct w9968cf_device* cam;
+	int err = 0;
+	enum w9968cf_model_id mod_id;
+	struct list_head* ptr;
+	u8 sc = 0; /* number of simultaneous cameras */
+	static unsigned short dev_nr = 0; /* we are handling device number n */
+
+	if (le16_to_cpu(udev->descriptor.idVendor)  == winbond_id_table[0].idVendor &&
+	    le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct)
+		mod_id = W9968CF_MOD_CLVBWGP; /* see camlist[] table */
+	else if (le16_to_cpu(udev->descriptor.idVendor)  == winbond_id_table[1].idVendor &&
+		 le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct)
+		mod_id = W9968CF_MOD_GENERIC; /* see camlist[] table */
+	else
+		return -ENODEV;
+
+	cam = (struct w9968cf_device*)
+		  kzalloc(sizeof(struct w9968cf_device), GFP_KERNEL);
+	if (!cam)
+		return -ENOMEM;
+
+	mutex_init(&cam->dev_mutex);
+	mutex_lock(&cam->dev_mutex);
+
+	cam->usbdev = udev;
+	/* NOTE: a local copy is used to avoid possible race conditions */
+	memcpy(&cam->dev, &udev->dev, sizeof(struct device));
+
+	DBG(2, "%s detected", symbolic(camlist, mod_id))
+
+	if (simcams > W9968CF_MAX_DEVICES)
+		simcams = W9968CF_SIMCAMS;
+
+	/* How many cameras are connected ? */
+	mutex_lock(&w9968cf_devlist_mutex);
+	list_for_each(ptr, &w9968cf_dev_list)
+		sc++;
+	mutex_unlock(&w9968cf_devlist_mutex);
+
+	if (sc >= simcams) {
+		DBG(2, "Device rejected: too many connected cameras "
+		       "(max. %u)", simcams)
+		err = -EPERM;
+		goto fail;
+	}
+
+
+	/* Allocate 2 bytes of memory for camera control USB transfers */
+	if (!(cam->control_buffer = kzalloc(2, GFP_KERNEL))) {
+		DBG(1,"Couldn't allocate memory for camera control transfers")
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	/* Allocate 8 bytes of memory for USB data transfers to the FSB */
+	if (!(cam->data_buffer = kzalloc(8, GFP_KERNEL))) {
+		DBG(1, "Couldn't allocate memory for data "
+		       "transfers to the FSB")
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	/* Register the V4L device */
+	cam->v4ldev = video_device_alloc();
+	if (!cam->v4ldev) {
+		DBG(1, "Could not allocate memory for a V4L structure")
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	strcpy(cam->v4ldev->name, symbolic(camlist, mod_id));
+	cam->v4ldev->owner = THIS_MODULE;
+	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
+	cam->v4ldev->hardware = VID_HARDWARE_W9968CF;
+	cam->v4ldev->fops = &w9968cf_fops;
+	cam->v4ldev->minor = video_nr[dev_nr];
+	cam->v4ldev->release = video_device_release;
+	video_set_drvdata(cam->v4ldev, cam);
+	cam->v4ldev->dev = &cam->dev;
+
+	err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
+				    video_nr[dev_nr]);
+	if (err) {
+		DBG(1, "V4L device registration failed")
+		if (err == -ENFILE && video_nr[dev_nr] == -1)
+			DBG(2, "Couldn't find a free /dev/videoX node")
+		video_nr[dev_nr] = -1;
+		dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
+		goto fail;
+	}
+
+	DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor)
+
+	/* Set some basic constants */
+	w9968cf_configure_camera(cam, udev, mod_id, dev_nr);
+
+	/* Add a new entry into the list of V4L registered devices */
+	mutex_lock(&w9968cf_devlist_mutex);
+	list_add(&cam->v4llist, &w9968cf_dev_list);
+	mutex_unlock(&w9968cf_devlist_mutex);
+	dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
+
+	w9968cf_turn_on_led(cam);
+
+	w9968cf_i2c_init(cam);
+
+	usb_set_intfdata(intf, cam);
+	mutex_unlock(&cam->dev_mutex);
+	return 0;
+
+fail: /* Free unused memory */
+	kfree(cam->control_buffer);
+	kfree(cam->data_buffer);
+	if (cam->v4ldev)
+		video_device_release(cam->v4ldev);
+	mutex_unlock(&cam->dev_mutex);
+	kfree(cam);
+	return err;
+}
+
+
+static void w9968cf_usb_disconnect(struct usb_interface* intf)
+{
+	struct w9968cf_device* cam =
+	   (struct w9968cf_device*)usb_get_intfdata(intf);
+
+	down_write(&w9968cf_disconnect);
+
+	if (cam) {
+		/* Prevent concurrent accesses to data */
+		mutex_lock(&cam->dev_mutex);
+
+		cam->disconnected = 1;
+
+		DBG(2, "Disconnecting %s...", symbolic(camlist, cam->id))
+
+		wake_up_interruptible_all(&cam->open);
+
+		if (cam->users) {
+			DBG(2, "The device is open (/dev/video%d)! "
+			       "Process name: %s. Deregistration and memory "
+			       "deallocation are deferred on close.",
+			    cam->v4ldev->minor, cam->command)
+			cam->misconfigured = 1;
+			w9968cf_stop_transfer(cam);
+			wake_up_interruptible(&cam->wait_queue);
+		} else
+			w9968cf_release_resources(cam);
+
+		mutex_unlock(&cam->dev_mutex);
+
+		if (!cam->users)
+			kfree(cam);
+	}
+
+	up_write(&w9968cf_disconnect);
+}
+
+
+static struct usb_driver w9968cf_usb_driver = {
+	.name =       "w9968cf",
+	.id_table =   winbond_id_table,
+	.probe =      w9968cf_usb_probe,
+	.disconnect = w9968cf_usb_disconnect,
+};
+
+
+
+/****************************************************************************
+ * Module init, exit and intermodule communication                          *
+ ****************************************************************************/
+
+static int __init w9968cf_module_init(void)
+{
+	int err;
+
+	KDBG(2, W9968CF_MODULE_NAME" "W9968CF_MODULE_VERSION)
+	KDBG(3, W9968CF_MODULE_AUTHOR)
+
+	if (ovmod_load)
+		request_module("ovcamchip");
+
+	if ((err = usb_register(&w9968cf_usb_driver)))
+		return err;
+
+	return 0;
+}
+
+
+static void __exit w9968cf_module_exit(void)
+{
+	/* w9968cf_usb_disconnect() will be called */
+	usb_deregister(&w9968cf_usb_driver);
+
+	KDBG(2, W9968CF_MODULE_NAME" deregistered")
+}
+
+
+module_init(w9968cf_module_init);
+module_exit(w9968cf_module_exit);
+
diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h
new file mode 100644
index 000000000000..2836b45ec206
--- /dev/null
+++ b/drivers/media/video/w9968cf.h
@@ -0,0 +1,330 @@
+/***************************************************************************
+ * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip.       *
+ *                                                                         *
+ * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _W9968CF_H_
+#define _W9968CF_H_
+
+#include <linux/videodev.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/config.h>
+#include <linux/param.h>
+#include <linux/types.h>
+#include <linux/rwsem.h>
+#include <linux/mutex.h>
+
+#include <media/ovcamchip.h>
+
+#include "w9968cf_vpp.h"
+
+
+/****************************************************************************
+ * Default values                                                           *
+ ****************************************************************************/
+
+#define W9968CF_OVMOD_LOAD      1  /* automatic 'ovcamchip' module loading */
+#define W9968CF_VPPMOD_LOAD     1  /* automatic 'w9968cf-vpp' module loading */
+
+/* Comment/uncomment the following line to enable/disable debugging messages */
+#define W9968CF_DEBUG
+
+/* These have effect only if W9968CF_DEBUG is defined */
+#define W9968CF_DEBUG_LEVEL    2 /* from 0 to 6. 0 for no debug informations */
+#define W9968CF_SPECIFIC_DEBUG 0 /* 0 or 1 */
+
+#define W9968CF_MAX_DEVICES    32
+#define W9968CF_SIMCAMS        W9968CF_MAX_DEVICES /* simultaneous cameras */
+
+#define W9968CF_MAX_BUFFERS   32
+#define W9968CF_BUFFERS       2 /* n. of frame buffers from 2 to MAX_BUFFERS */
+
+/* Maximum data payload sizes in bytes for alternate settings */
+static const u16 wMaxPacketSize[] = {1023, 959, 895, 831, 767, 703, 639, 575,
+				      511, 447, 383, 319, 255, 191, 127,  63};
+#define W9968CF_PACKET_SIZE      1023 /* according to wMaxPacketSizes[] */
+#define W9968CF_MIN_PACKET_SIZE  63 /* minimum value */
+#define W9968CF_ISO_PACKETS      5 /* n.of packets for isochronous transfers */
+#define W9968CF_USB_CTRL_TIMEOUT 1000 /* timeout (ms) for usb control commands */
+#define W9968CF_URBS             2 /* n. of scheduled URBs for ISO transfer */
+
+#define W9968CF_I2C_BUS_DELAY    4 /* delay in us for I2C bit r/w operations */
+#define W9968CF_I2C_RW_RETRIES   15 /* number of max I2C r/w retries */
+
+/* Available video formats */
+struct w9968cf_format {
+	const u16 palette;
+	const u16 depth;
+	const u8 compression;
+};
+
+static const struct w9968cf_format w9968cf_formatlist[] = {
+	{ VIDEO_PALETTE_UYVY,    16, 0 }, /* original video */
+	{ VIDEO_PALETTE_YUV422P, 16, 1 }, /* with JPEG compression */
+	{ VIDEO_PALETTE_YUV420P, 12, 1 }, /* with JPEG compression */
+	{ VIDEO_PALETTE_YUV420,  12, 1 }, /* same as YUV420P */
+	{ VIDEO_PALETTE_YUYV,    16, 0 }, /* software conversion */
+	{ VIDEO_PALETTE_YUV422,  16, 0 }, /* software conversion */
+	{ VIDEO_PALETTE_GREY,     8, 0 }, /* software conversion */
+	{ VIDEO_PALETTE_RGB555,  16, 0 }, /* software conversion */
+	{ VIDEO_PALETTE_RGB565,  16, 0 }, /* software conversion */
+	{ VIDEO_PALETTE_RGB24,   24, 0 }, /* software conversion */
+	{ VIDEO_PALETTE_RGB32,   32, 0 }, /* software conversion */
+	{ 0,                      0, 0 }  /* 0 is a terminating entry */
+};
+
+#define W9968CF_DECOMPRESSION    2 /* decomp:0=disable,1=force,2=any formats */
+#define W9968CF_PALETTE_DECOMP_OFF   VIDEO_PALETTE_UYVY    /* when decomp=0 */
+#define W9968CF_PALETTE_DECOMP_FORCE VIDEO_PALETTE_YUV420P /* when decomp=1 */
+#define W9968CF_PALETTE_DECOMP_ON    VIDEO_PALETTE_UYVY    /* when decomp=2 */
+
+#define W9968CF_FORCE_RGB        0  /* read RGB instead of BGR, yes=1/no=0 */
+
+#define W9968CF_MAX_WIDTH      800 /* Has effect if up-scaling is on */
+#define W9968CF_MAX_HEIGHT     600 /* Has effect if up-scaling is on */
+#define W9968CF_WIDTH          320 /* from 128 to 352, multiple of 16 */
+#define W9968CF_HEIGHT         240 /* from  96 to 288, multiple of 16 */
+
+#define W9968CF_CLAMPING       0 /* 0 disable, 1 enable video data clamping */
+#define W9968CF_FILTER_TYPE    0 /* 0 disable  1 (1-2-1), 2 (2-3-6-3-2) */
+#define W9968CF_DOUBLE_BUFFER  1 /* 0 disable, 1 enable double buffer */
+#define W9968CF_LARGEVIEW      1 /* 0 disable, 1 enable */
+#define W9968CF_UPSCALING      0 /* 0 disable, 1 enable */
+
+#define W9968CF_MONOCHROME     0 /* 0 not monochrome, 1 monochrome sensor */
+#define W9968CF_BRIGHTNESS     31000 /* from 0 to 65535 */
+#define W9968CF_HUE            32768 /* from 0 to 65535 */
+#define W9968CF_COLOUR         32768 /* from 0 to 65535 */
+#define W9968CF_CONTRAST       50000 /* from 0 to 65535 */
+#define W9968CF_WHITENESS      32768 /* from 0 to 65535 */
+
+#define W9968CF_AUTOBRIGHT     0 /* 0 disable, 1 enable automatic brightness */
+#define W9968CF_AUTOEXP        1 /* 0 disable, 1 enable automatic exposure */
+#define W9968CF_LIGHTFREQ      50 /* light frequency. 50Hz (Europe) or 60Hz */
+#define W9968CF_BANDINGFILTER  0 /* 0 disable, 1 enable banding filter */
+#define W9968CF_BACKLIGHT      0 /* 0 or 1, 1=object is lit from behind */
+#define W9968CF_MIRROR         0 /* 0 or 1 [don't] reverse image horizontally*/
+
+#define W9968CF_CLOCKDIV         -1 /* -1 = automatic clock divisor */
+#define W9968CF_DEF_CLOCKDIVISOR  0 /* default sensor clock divisor value */
+
+
+/****************************************************************************
+ * Globals                                                                  *
+ ****************************************************************************/
+
+#define W9968CF_MODULE_NAME     "V4L driver for W996[87]CF JPEG USB " \
+				"Dual Mode Camera Chip"
+#define W9968CF_MODULE_VERSION  "1:1.33-basic"
+#define W9968CF_MODULE_AUTHOR   "(C) 2002-2004 Luca Risolia"
+#define W9968CF_AUTHOR_EMAIL    "<luca.risolia@studio.unibo.it>"
+#define W9968CF_MODULE_LICENSE  "GPL"
+
+static const struct usb_device_id winbond_id_table[] = {
+	{
+		/* Creative Labs Video Blaster WebCam Go Plus */
+		USB_DEVICE(0x041e, 0x4003),
+		.driver_info = (unsigned long)"w9968cf",
+	},
+	{
+		/* Generic W996[87]CF JPEG USB Dual Mode Camera */
+		USB_DEVICE(0x1046, 0x9967),
+		.driver_info = (unsigned long)"w9968cf",
+	},
+	{ } /* terminating entry */
+};
+
+/* W996[87]CF camera models, internal ids: */
+enum w9968cf_model_id {
+	W9968CF_MOD_GENERIC = 1, /* Generic W996[87]CF based device */
+	W9968CF_MOD_CLVBWGP = 11,/*Creative Labs Video Blaster WebCam Go Plus*/
+	W9968CF_MOD_ADPVDMA = 21, /* Aroma Digi Pen VGA Dual Mode ADG-5000 */
+	W9986CF_MOD_AAU = 31,     /* AVerMedia AVerTV USB */
+	W9968CF_MOD_CLVBWG = 34,  /* Creative Labs Video Blaster WebCam Go */
+	W9968CF_MOD_LL = 37,      /* Lebon LDC-035A */
+	W9968CF_MOD_EEEMC = 40,   /* Ezonics EZ-802 EZMega Cam */
+	W9968CF_MOD_OOE = 42,     /* OmniVision OV8610-EDE */
+	W9968CF_MOD_ODPVDMPC = 43,/* OPCOM Digi Pen VGA Dual Mode Pen Camera */
+	W9968CF_MOD_PDPII = 46,   /* Pretec Digi Pen-II */
+	W9968CF_MOD_PDP480 = 49,  /* Pretec DigiPen-480 */
+};
+
+enum w9968cf_frame_status {
+	F_READY,            /* finished grabbing & ready to be read/synced */
+	F_GRABBING,         /* in the process of being grabbed into */
+	F_ERROR,            /* something bad happened while processing */
+	F_UNUSED            /* unused (no VIDIOCMCAPTURE) */
+};
+
+struct w9968cf_frame_t {
+	void* buffer;
+	unsigned long size;
+	u32 length;
+	int number;
+	enum w9968cf_frame_status status;
+	struct w9968cf_frame_t* next;
+	u8 queued;
+};
+
+enum w9968cf_vpp_flag {
+	VPP_NONE = 0x00,
+	VPP_UPSCALE = 0x01,
+	VPP_SWAP_YUV_BYTES = 0x02,
+	VPP_DECOMPRESSION = 0x04,
+	VPP_UYVY_TO_RGBX = 0x08,
+};
+
+/* Main device driver structure */
+struct w9968cf_device {
+	struct device dev; /* device structure */
+
+	enum w9968cf_model_id id;   /* private device identifier */
+
+	struct video_device* v4ldev; /* -> V4L structure */
+	struct list_head v4llist;    /* entry of the list of V4L cameras */
+
+	struct usb_device* usbdev;           /* -> main USB structure */
+	struct urb* urb[W9968CF_URBS];       /* -> USB request block structs */
+	void* transfer_buffer[W9968CF_URBS]; /* -> ISO transfer buffers */
+	u16* control_buffer;                 /* -> buffer for control req.*/
+	u16* data_buffer;                    /* -> data to send to the FSB */
+
+	struct w9968cf_frame_t frame[W9968CF_MAX_BUFFERS];
+	struct w9968cf_frame_t frame_tmp; /* temporary frame */
+	struct w9968cf_frame_t frame_vpp; /* helper frame.*/
+	struct w9968cf_frame_t* frame_current; /* -> frame being grabbed */
+	struct w9968cf_frame_t* requested_frame[W9968CF_MAX_BUFFERS];
+
+	u8 max_buffers,   /* number of requested buffers */
+	   force_palette, /* yes=1/no=0 */
+	   force_rgb,     /* read RGB instead of BGR, yes=1, no=0 */
+	   double_buffer, /* hardware double buffering yes=1/no=0 */
+	   clamping,      /* video data clamping yes=1/no=0 */
+	   filter_type,   /* 0=disabled, 1=3 tap, 2=5 tap filter */
+	   capture,       /* 0=disabled, 1=enabled */
+	   largeview,     /* 0=disabled, 1=enabled */
+	   decompression, /* 0=disabled, 1=forced, 2=allowed */
+	   upscaling;     /* software image scaling, 0=enabled, 1=disabled */
+
+	struct video_picture picture; /* current picture settings */
+	struct video_window window;   /* current window settings */
+
+	u16 hw_depth,    /* depth (used by the chip) */
+	    hw_palette,  /* palette (used by the chip) */
+	    hw_width,    /* width (used by the chip) */
+	    hw_height,   /* height (used by the chip) */
+	    hs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */
+	    vs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */
+	    start_cropx, /* pixels from HS inactive edge to 1st cropped pixel*/
+	    start_cropy; /* pixels from VS inactive edge to 1st cropped pixel*/
+
+	enum w9968cf_vpp_flag vpp_flag; /* post-processing routines in use */
+
+	u8 nbuffers,      /* number of allocated frame buffers */
+	   altsetting,    /* camera alternate setting */
+	   disconnected,  /* flag: yes=1, no=0 */
+	   misconfigured, /* flag: yes=1, no=0 */
+	   users,         /* flag: number of users holding the device */
+	   streaming;     /* flag: yes=1, no=0 */
+
+	u8 sensor_initialized; /* flag: yes=1, no=0 */
+
+	/* Determined by the image sensor type: */
+	int sensor,       /* type of image sensor chip (CC_*) */
+	    monochrome;   /* image sensor is (probably) monochrome */
+	u16 maxwidth,     /* maximum width supported by the image sensor */
+	    maxheight,    /* maximum height supported by the image sensor */
+	    minwidth,     /* minimum width supported by the image sensor */
+	    minheight;    /* minimum height supported by the image sensor */
+	u8  auto_brt,     /* auto brightness enabled flag */
+	    auto_exp,     /* auto exposure enabled flag */
+	    backlight,    /* backlight exposure algorithm flag */
+	    mirror,       /* image is reversed horizontally */
+	    lightfreq,    /* power (lighting) frequency */
+	    bandfilt;     /* banding filter enabled flag */
+	s8  clockdiv;     /* clock divisor */
+
+	/* I2C interface to kernel */
+	struct i2c_adapter i2c_adapter;
+	struct i2c_client* sensor_client;
+
+	/* Locks */
+	struct mutex dev_mutex,    /* for probe, disconnect,open and close */
+			 fileop_mutex; /* for read and ioctl */
+	spinlock_t urb_lock,   /* for submit_urb() and unlink_urb() */
+		   flist_lock; /* for requested frame list accesses */
+	wait_queue_head_t open, wait_queue;
+
+	char command[16]; /* name of the program holding the device */
+};
+
+
+/****************************************************************************
+ * Macros for debugging                                                     *
+ ****************************************************************************/
+
+#undef DBG
+#undef KDBG
+#ifdef W9968CF_DEBUG
+/* For device specific debugging messages */
+#	define DBG(level, fmt, args...)                                       \
+{                                                                             \
+	if ( ((specific_debug) && (debug == (level))) ||                      \
+	     ((!specific_debug) && (debug >= (level))) ) {                    \
+		if ((level) == 1)                                             \
+			dev_err(&cam->dev, fmt "\n", ## args);                \
+		else if ((level) == 2 || (level) == 3)                        \
+			dev_info(&cam->dev, fmt "\n", ## args);               \
+		else if ((level) == 4)                                        \
+			dev_warn(&cam->dev, fmt "\n", ## args);               \
+		else if ((level) >= 5)                                        \
+			dev_info(&cam->dev, "[%s:%d] " fmt "\n",              \
+				 __FUNCTION__, __LINE__ , ## args);           \
+	}                                                                     \
+}
+/* For generic kernel (not device specific) messages */
+#	define KDBG(level, fmt, args...)                                      \
+{                                                                             \
+	if ( ((specific_debug) && (debug == (level))) ||                      \
+	     ((!specific_debug) && (debug >= (level))) ) {                    \
+		if ((level) >= 1 && (level) <= 4)                             \
+			pr_info("w9968cf: " fmt "\n", ## args);               \
+		else if ((level) >= 5)                                        \
+			pr_debug("w9968cf: [%s:%d] " fmt "\n", __FUNCTION__,  \
+				 __LINE__ , ## args);                         \
+	}                                                                     \
+}
+#else
+	/* Not debugging: nothing */
+#	define DBG(level, fmt, args...) do {;} while(0);
+#	define KDBG(level, fmt, args...) do {;} while(0);
+#endif
+
+#undef PDBG
+#define PDBG(fmt, args...)                                                    \
+dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args);
+
+#undef PDBGG
+#define PDBGG(fmt, args...) do {;} while(0); /* nothing: it's a placeholder */
+
+#endif /* _W9968CF_H_ */
diff --git a/drivers/media/video/w9968cf_decoder.h b/drivers/media/video/w9968cf_decoder.h
new file mode 100644
index 000000000000..59decbfc540a
--- /dev/null
+++ b/drivers/media/video/w9968cf_decoder.h
@@ -0,0 +1,86 @@
+/***************************************************************************
+ * Video decoder for the W996[87]CF driver for Linux.                      *
+ *                                                                         *
+ * Copyright (C) 2003 2004 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _W9968CF_DECODER_H_
+#define _W9968CF_DECODER_H_
+
+/* Comment/uncomment this for high/low quality of compressed video */
+#define W9968CF_DEC_FAST_LOWQUALITY_VIDEO
+
+#ifdef W9968CF_DEC_FAST_LOWQUALITY_VIDEO
+static const unsigned char Y_QUANTABLE[64] = {
+	16,  11,  10,  16,  24,  40,  51,  61,
+	12,  12,  14,  19,  26,  58,  60,  55,
+	14,  13,  16,  24,  40,  57,  69,  56,
+	14,  17,  22,  29,  51,  87,  80,  62,
+	18,  22,  37,  56,  68, 109, 103,  77,
+	24,  35,  55,  64,  81, 104, 113,  92,
+	49,  64,  78,  87, 103, 121, 120, 101,
+	72,  92,  95,  98, 112, 100, 103,  99
+};
+
+static const unsigned char UV_QUANTABLE[64] = {
+	17,  18,  24,  47,  99,  99,  99,  99,
+	18,  21,  26,  66,  99,  99,  99,  99,
+	24,  26,  56,  99,  99,  99,  99,  99,
+	47,  66,  99,  99,  99,  99,  99,  99,
+	99,  99,  99,  99,  99,  99,  99,  99,
+	99,  99,  99,  99,  99,  99,  99,  99,
+	99,  99,  99,  99,  99,  99,  99,  99,
+	99,  99,  99,  99,  99,  99,  99,  99
+};
+#else
+static const unsigned char Y_QUANTABLE[64] = {
+	 8,   5,   5,   8,  12,  20,  25,  30,
+	 6,   6,   7,   9,  13,  29,  30,  27,
+	 7,   6,   8,  12,  20,  28,  34,  28,
+	 7,   8,  11,  14,  25,  43,  40,  31,
+	 9,  11,  18,  28,  34,  54,  51,  38,
+	12,  17,  27,  32,  40,  52,  56,  46,
+	24,  32,  39,  43,  51,  60,  60,  50,
+	36,  46,  47,  49,  56,  50,  51,  49
+};
+
+static const unsigned char UV_QUANTABLE[64] = {
+	 8,   9,  12,  23,  49,  49,  49,  49,
+	 9,  10,  13,  33,  49,  49,  49,  49,
+	12,  13,  28,  49,  49,  49,  49,  49,
+	23,  33,  49,  49,  49,  49,  49,  49,
+	49,  49,  49,  49,  49,  49,  49,  49,
+	49,  49,  49,  49,  49,  49,  49,  49,
+	49,  49,  49,  49,  49,  49,  49,  49,
+	49,  49,  49,  49,  49,  49,  49,  49
+};
+#endif
+
+#define W9968CF_DEC_ERR_CORRUPTED_DATA  -1
+#define W9968CF_DEC_ERR_BUF_OVERFLOW    -2
+#define W9968CF_DEC_ERR_NO_SOI          -3
+#define W9968CF_DEC_ERR_NO_SOF0         -4
+#define W9968CF_DEC_ERR_NO_SOS          -5
+#define W9968CF_DEC_ERR_NO_EOI          -6
+
+extern void w9968cf_init_decoder(void);
+extern int w9968cf_check_headers(const unsigned char* Pin,
+				 const unsigned long BUF_SIZE);
+extern int w9968cf_decode(const char* Pin, const unsigned long BUF_SIZE,
+			  const unsigned W, const unsigned H, char* Pout);
+
+#endif /* _W9968CF_DECODER_H_ */
diff --git a/drivers/media/video/w9968cf_vpp.h b/drivers/media/video/w9968cf_vpp.h
new file mode 100644
index 000000000000..88c9b6c0cc36
--- /dev/null
+++ b/drivers/media/video/w9968cf_vpp.h
@@ -0,0 +1,40 @@
+/***************************************************************************
+ * Interface for video post-processing functions for the W996[87]CF driver *
+ * for Linux.                                                              *
+ *                                                                         *
+ * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _W9968CF_VPP_H_
+#define _W9968CF_VPP_H_
+
+#include <linux/module.h>
+#include <asm/types.h>
+
+struct w9968cf_vpp_t {
+	struct module* owner;
+	int (*check_headers)(const unsigned char*, const unsigned long);
+	int (*decode)(const char*, const unsigned long, const unsigned,
+		      const unsigned, char*);
+	void (*swap_yuvbytes)(void*, unsigned long);
+	void (*uyvy_to_rgbx)(u8*, unsigned long, u8*, u16, u8);
+	void (*scale_up)(u8*, u8*, u16, u16, u16, u16, u16);
+
+	u8 busy; /* read-only flag: module is/is not in use */
+};
+
+#endif /* _W9968CF_VPP_H_ */
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
index 8cb64f8a8a91..d81a88bbe43d 100644
--- a/drivers/media/video/wm8775.c
+++ b/drivers/media/video/wm8775.c
@@ -79,21 +79,26 @@ static int wm8775_command(struct i2c_client *client, unsigned int cmd,
 			  void *arg)
 {
 	struct wm8775_state *state = i2c_get_clientdata(client);
-	struct v4l2_audio *input = arg;
+	struct v4l2_routing *route = arg;
 	struct v4l2_control *ctrl = arg;
 
 	switch (cmd) {
-	case VIDIOC_S_AUDIO:
+	case VIDIOC_INT_G_AUDIO_ROUTING:
+		route->input = state->input;
+		route->output = 0;
+		break;
+
+	case VIDIOC_INT_S_AUDIO_ROUTING:
 		/* There are 4 inputs and one output. Zero or more inputs
 		   are multiplexed together to the output. Hence there are
 		   16 combinations.
 		   If only one input is active (the normal case) then the
 		   input values 1, 2, 4 or 8 should be used. */
-		if (input->index > 15) {
-			v4l_err(client, "Invalid input %d.\n", input->index);
+		if (route->input > 15) {
+			v4l_err(client, "Invalid input %d.\n", route->input);
 			return -EINVAL;
 		}
-		state->input = input->index;
+		state->input = route->input;
 		if (state->muted)
 			break;
 		wm8775_write(client, R21, 0x0c0);
@@ -102,11 +107,6 @@ static int wm8775_command(struct i2c_client *client, unsigned int cmd,
 		wm8775_write(client, R21, 0x100 + state->input);
 		break;
 
-	case VIDIOC_G_AUDIO:
-		memset(input, 0, sizeof(*input));
-		input->index = state->input;
-		break;
-
 	case VIDIOC_G_CTRL:
 		if (ctrl->id != V4L2_CID_AUDIO_MUTE)
 			return -EINVAL;
diff --git a/drivers/media/video/zc0301/Makefile b/drivers/media/video/zc0301/Makefile
new file mode 100644
index 000000000000..d749199d8f06
--- /dev/null
+++ b/drivers/media/video/zc0301/Makefile
@@ -0,0 +1,3 @@
+zc0301-objs     := zc0301_core.o zc0301_pas202bcb.o
+
+obj-$(CONFIG_USB_ZC0301)        += zc0301.o
diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h
new file mode 100644
index 000000000000..b9c93b8c16f7
--- /dev/null
+++ b/drivers/media/video/zc0301/zc0301.h
@@ -0,0 +1,192 @@
+/***************************************************************************
+ * V4L2 driver for ZC0301 Image Processor and Control Chip                 *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _ZC0301_H_
+#define _ZC0301_H_
+
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <linux/param.h>
+#include <linux/mutex.h>
+#include <linux/rwsem.h>
+#include <linux/stddef.h>
+#include <linux/string.h>
+
+#include "zc0301_sensor.h"
+
+/*****************************************************************************/
+
+#define ZC0301_DEBUG
+#define ZC0301_DEBUG_LEVEL         2
+#define ZC0301_MAX_DEVICES         64
+#define ZC0301_FORCE_MUNMAP        0
+#define ZC0301_MAX_FRAMES          32
+#define ZC0301_COMPRESSION_QUALITY 0
+#define ZC0301_URBS                2
+#define ZC0301_ISO_PACKETS         7
+#define ZC0301_ALTERNATE_SETTING   7
+#define ZC0301_URB_TIMEOUT         msecs_to_jiffies(2 * ZC0301_ISO_PACKETS)
+#define ZC0301_CTRL_TIMEOUT        100
+#define ZC0301_FRAME_TIMEOUT       2
+
+/*****************************************************************************/
+
+ZC0301_ID_TABLE
+ZC0301_SENSOR_TABLE
+
+enum zc0301_frame_state {
+	F_UNUSED,
+	F_QUEUED,
+	F_GRABBING,
+	F_DONE,
+	F_ERROR,
+};
+
+struct zc0301_frame_t {
+	void* bufmem;
+	struct v4l2_buffer buf;
+	enum zc0301_frame_state state;
+	struct list_head frame;
+	unsigned long vma_use_count;
+};
+
+enum zc0301_dev_state {
+	DEV_INITIALIZED = 0x01,
+	DEV_DISCONNECTED = 0x02,
+	DEV_MISCONFIGURED = 0x04,
+};
+
+enum zc0301_io_method {
+	IO_NONE,
+	IO_READ,
+	IO_MMAP,
+};
+
+enum zc0301_stream_state {
+	STREAM_OFF,
+	STREAM_INTERRUPT,
+	STREAM_ON,
+};
+
+struct zc0301_module_param {
+	u8 force_munmap;
+	u16 frame_timeout;
+};
+
+static DECLARE_RWSEM(zc0301_disconnect);
+
+struct zc0301_device {
+	struct video_device* v4ldev;
+
+	struct zc0301_sensor sensor;
+
+	struct usb_device* usbdev;
+	struct urb* urb[ZC0301_URBS];
+	void* transfer_buffer[ZC0301_URBS];
+	u8* control_buffer;
+
+	struct zc0301_frame_t *frame_current, frame[ZC0301_MAX_FRAMES];
+	struct list_head inqueue, outqueue;
+	u32 frame_count, nbuffers, nreadbuffers;
+
+	enum zc0301_io_method io;
+	enum zc0301_stream_state stream;
+
+	struct v4l2_jpegcompression compression;
+
+	struct zc0301_module_param module_param;
+
+	enum zc0301_dev_state state;
+	u8 users;
+
+	struct mutex dev_mutex, fileop_mutex;
+	spinlock_t queue_lock;
+	wait_queue_head_t open, wait_frame, wait_stream;
+};
+
+/*****************************************************************************/
+
+struct zc0301_device*
+zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id)
+{
+	return usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id) ? cam : NULL;
+}
+
+void
+zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor)
+{
+	memcpy(&cam->sensor, sensor, sizeof(struct zc0301_sensor));
+}
+
+/*****************************************************************************/
+
+#undef DBG
+#undef KDBG
+#ifdef ZC0301_DEBUG
+#	define DBG(level, fmt, args...)                                       \
+do {                                                                          \
+	if (debug >= (level)) {                                               \
+		if ((level) == 1)                                             \
+			dev_err(&cam->usbdev->dev, fmt "\n", ## args);        \
+		else if ((level) == 2)                                        \
+			dev_info(&cam->usbdev->dev, fmt "\n", ## args);       \
+		else if ((level) >= 3)                                        \
+			dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",      \
+				 __FUNCTION__, __LINE__ , ## args);           \
+	}                                                                     \
+} while (0)
+#	define KDBG(level, fmt, args...)                                      \
+do {                                                                          \
+	if (debug >= (level)) {                                               \
+		if ((level) == 1 || (level) == 2)                             \
+			pr_info("zc0301: " fmt "\n", ## args);                \
+		else if ((level) == 3)                                        \
+			pr_debug("zc0301: [%s:%d] " fmt "\n", __FUNCTION__,   \
+				 __LINE__ , ## args);                         \
+	}                                                                     \
+} while (0)
+#	define V4LDBG(level, name, cmd)                                       \
+do {                                                                          \
+	if (debug >= (level))                                                 \
+		v4l_print_ioctl(name, cmd);                                   \
+} while (0)
+#else
+#	define DBG(level, fmt, args...) do {;} while(0)
+#	define KDBG(level, fmt, args...) do {;} while(0)
+#	define V4LDBG(level, name, cmd) do {;} while(0)
+#endif
+
+#undef PDBG
+#define PDBG(fmt, args...)                                                    \
+dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",                              \
+	 __FUNCTION__, __LINE__ , ## args)
+
+#undef PDBGG
+#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
+
+#endif /* _ZC0301_H_ */
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
new file mode 100644
index 000000000000..0fad39754f7a
--- /dev/null
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -0,0 +1,2055 @@
+/***************************************************************************
+ * Video4Linux2 driver for ZC0301 Image Processor and Control Chip         *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * Informations about the chip internals needed to enable the I2C protocol *
+ * have been taken from the documentation of the ZC030x Video4Linux1       *
+ * driver written by Andrew Birkett <andy@nobugs.org>                      *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/poll.h>
+#include <linux/stat.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/page-flags.h>
+#include <linux/byteorder/generic.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+
+#include "zc0301.h"
+
+/*****************************************************************************/
+
+#define ZC0301_MODULE_NAME    "V4L2 driver for ZC0301 "                       \
+			      "Image Processor and Control Chip"
+#define ZC0301_MODULE_AUTHOR  "(C) 2006 Luca Risolia"
+#define ZC0301_AUTHOR_EMAIL   "<luca.risolia@studio.unibo.it>"
+#define ZC0301_MODULE_LICENSE "GPL"
+#define ZC0301_MODULE_VERSION "1:1.03"
+#define ZC0301_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 3)
+
+/*****************************************************************************/
+
+MODULE_DEVICE_TABLE(usb, zc0301_id_table);
+
+MODULE_AUTHOR(ZC0301_MODULE_AUTHOR " " ZC0301_AUTHOR_EMAIL);
+MODULE_DESCRIPTION(ZC0301_MODULE_NAME);
+MODULE_VERSION(ZC0301_MODULE_VERSION);
+MODULE_LICENSE(ZC0301_MODULE_LICENSE);
+
+static short video_nr[] = {[0 ... ZC0301_MAX_DEVICES-1] = -1};
+module_param_array(video_nr, short, NULL, 0444);
+MODULE_PARM_DESC(video_nr,
+		 "\n<-1|n[,...]> Specify V4L2 minor mode number."
+		 "\n -1 = use next available (default)"
+		 "\n  n = use minor number n (integer >= 0)"
+		 "\nYou can specify up to "
+		 __MODULE_STRING(ZC0301_MAX_DEVICES) " cameras this way."
+		 "\nFor example:"
+		 "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+		 "\nthe second registered camera and use auto for the first"
+		 "\none and for every other camera."
+		 "\n");
+
+static short force_munmap[] = {[0 ... ZC0301_MAX_DEVICES-1] =
+			       ZC0301_FORCE_MUNMAP};
+module_param_array(force_munmap, bool, NULL, 0444);
+MODULE_PARM_DESC(force_munmap,
+		 "\n<0|1[,...]> Force the application to unmap previously"
+		 "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+		 "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+		 "\nthis feature. This parameter is specific for each"
+		 "\ndetected camera."
+		 "\n 0 = do not force memory unmapping"
+		 "\n 1 = force memory unmapping (save memory)"
+		 "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+		 "\n");
+
+static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] =
+				       ZC0301_FRAME_TIMEOUT};
+module_param_array(frame_timeout, uint, NULL, 0644);
+MODULE_PARM_DESC(frame_timeout,
+		 "\n<n[,...]> Timeout for a video frame in seconds."
+		 "\nThis parameter is specific for each detected camera."
+		 "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"."
+		 "\n");
+
+#ifdef ZC0301_DEBUG
+static unsigned short debug = ZC0301_DEBUG_LEVEL;
+module_param(debug, ushort, 0644);
+MODULE_PARM_DESC(debug,
+		 "\n<n> Debugging information level, from 0 to 3:"
+		 "\n0 = none (use carefully)"
+		 "\n1 = critical errors"
+		 "\n2 = significant informations"
+		 "\n3 = more verbose messages"
+		 "\nLevel 3 is useful for testing only, when only "
+		 "one device is used."
+		 "\nDefault value is "__MODULE_STRING(ZC0301_DEBUG_LEVEL)"."
+		 "\n");
+#endif
+
+/*****************************************************************************/
+
+static u32
+zc0301_request_buffers(struct zc0301_device* cam, u32 count,
+		       enum zc0301_io_method io)
+{
+	struct v4l2_pix_format* p = &(cam->sensor.pix_format);
+	struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
+	const size_t imagesize = cam->module_param.force_munmap ||
+				 io == IO_READ ?
+				 (p->width * p->height * p->priv) / 8 :
+				 (r->width * r->height * p->priv) / 8;
+	void* buff = NULL;
+	u32 i;
+
+	if (count > ZC0301_MAX_FRAMES)
+		count = ZC0301_MAX_FRAMES;
+
+	cam->nbuffers = count;
+	while (cam->nbuffers > 0) {
+		if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
+			break;
+		cam->nbuffers--;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize);
+		cam->frame[i].buf.index = i;
+		cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize);
+		cam->frame[i].buf.length = imagesize;
+		cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		cam->frame[i].buf.sequence = 0;
+		cam->frame[i].buf.field = V4L2_FIELD_NONE;
+		cam->frame[i].buf.memory = V4L2_MEMORY_MMAP;
+		cam->frame[i].buf.flags = 0;
+	}
+
+	return cam->nbuffers;
+}
+
+
+static void zc0301_release_buffers(struct zc0301_device* cam)
+{
+	if (cam->nbuffers) {
+		vfree(cam->frame[0].bufmem);
+		cam->nbuffers = 0;
+	}
+	cam->frame_current = NULL;
+}
+
+
+static void zc0301_empty_framequeues(struct zc0301_device* cam)
+{
+	u32 i;
+
+	INIT_LIST_HEAD(&cam->inqueue);
+	INIT_LIST_HEAD(&cam->outqueue);
+
+	for (i = 0; i < ZC0301_MAX_FRAMES; i++) {
+		cam->frame[i].state = F_UNUSED;
+		cam->frame[i].buf.bytesused = 0;
+	}
+}
+
+
+static void zc0301_requeue_outqueue(struct zc0301_device* cam)
+{
+	struct zc0301_frame_t *i;
+
+	list_for_each_entry(i, &cam->outqueue, frame) {
+		i->state = F_QUEUED;
+		list_add(&i->frame, &cam->inqueue);
+	}
+
+	INIT_LIST_HEAD(&cam->outqueue);
+}
+
+
+static void zc0301_queue_unusedframes(struct zc0301_device* cam)
+{
+	unsigned long lock_flags;
+	u32 i;
+
+	for (i = 0; i < cam->nbuffers; i++)
+		if (cam->frame[i].state == F_UNUSED) {
+			cam->frame[i].state = F_QUEUED;
+			spin_lock_irqsave(&cam->queue_lock, lock_flags);
+			list_add_tail(&cam->frame[i].frame, &cam->inqueue);
+			spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+		}
+}
+
+/*****************************************************************************/
+
+int zc0301_write_reg(struct zc0301_device* cam, u16 index, u16 value)
+{
+	struct usb_device* udev = cam->usbdev;
+	int res;
+
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0xa0, 0x40,
+			      value, index, NULL, 0, ZC0301_CTRL_TIMEOUT);
+	if (res < 0) {
+		DBG(3, "Failed to write a register (index 0x%04X, "
+		       "value 0x%02X, error %d)",index, value, res);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+int zc0301_read_reg(struct zc0301_device* cam, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* buff = cam->control_buffer;
+	int res;
+
+	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0xa1, 0xc0,
+			      0x0001, index, buff, 1, ZC0301_CTRL_TIMEOUT);
+	if (res < 0)
+		DBG(3, "Failed to read a register (index 0x%04X, error %d)",
+		    index, res);
+
+	PDBGG("Read: index 0x%04X, value: 0x%04X", index, (int)(*buff));
+
+	return (res >= 0) ? (int)(*buff) : -1;
+}
+
+
+int zc0301_i2c_read(struct zc0301_device* cam, u16 address, u8 length)
+{
+	int err = 0, res, r0, r1;
+
+	err += zc0301_write_reg(cam, 0x0092, address);
+	err += zc0301_write_reg(cam, 0x0090, 0x02);
+
+	msleep(1);
+
+	res = zc0301_read_reg(cam, 0x0091);
+	if (res < 0)
+		err += res;
+	r0 = zc0301_read_reg(cam, 0x0095);
+	if (r0 < 0)
+		err += r0;
+	r1 = zc0301_read_reg(cam, 0x0096);
+	if (r1 < 0)
+		err += r1;
+
+	res = (length <= 1) ? r0 : r0 | (r1 << 8);
+
+	if (err)
+		DBG(3, "I2C read failed at address 0x%04X, value: 0x%04X",
+		    address, res);
+
+
+	PDBGG("I2C read: address 0x%04X, value: 0x%04X", address, res);
+
+	return err ? -1 : res;
+}
+
+
+int zc0301_i2c_write(struct zc0301_device* cam, u16 address, u16 value)
+{
+	int err = 0, res;
+
+	err += zc0301_write_reg(cam, 0x0092, address);
+	err += zc0301_write_reg(cam, 0x0093, value & 0xff);
+	err += zc0301_write_reg(cam, 0x0094, value >> 8);
+	err += zc0301_write_reg(cam, 0x0090, 0x01);
+
+	msleep(1);
+
+	res = zc0301_read_reg(cam, 0x0091);
+	if (res < 0)
+		err += res;
+
+	if (err)
+		DBG(3, "I2C write failed at address 0x%04X, value: 0x%04X",
+		    address, value);
+
+	PDBGG("I2C write: address 0x%04X, value: 0x%04X", address, value);
+
+	return err ? -1 : 0;
+}
+
+/*****************************************************************************/
+
+static void zc0301_urb_complete(struct urb *urb, struct pt_regs* regs)
+{
+	struct zc0301_device* cam = urb->context;
+	struct zc0301_frame_t** f;
+	size_t imagesize;
+	u8 i;
+	int err = 0;
+
+	if (urb->status == -ENOENT)
+		return;
+
+	f = &cam->frame_current;
+
+	if (cam->stream == STREAM_INTERRUPT) {
+		cam->stream = STREAM_OFF;
+		if ((*f))
+			(*f)->state = F_QUEUED;
+		DBG(3, "Stream interrupted");
+		wake_up(&cam->wait_stream);
+	}
+
+	if (cam->state & DEV_DISCONNECTED)
+		return;
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		wake_up_interruptible(&cam->wait_frame);
+		return;
+	}
+
+	if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue))
+		goto resubmit_urb;
+
+	if (!(*f))
+		(*f) = list_entry(cam->inqueue.next, struct zc0301_frame_t,
+				  frame);
+
+	imagesize = (cam->sensor.pix_format.width *
+		     cam->sensor.pix_format.height *
+		     cam->sensor.pix_format.priv) / 8;
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		unsigned int len, status;
+		void *pos;
+		u16* soi;
+		u8 sof;
+
+		len = urb->iso_frame_desc[i].actual_length;
+		status = urb->iso_frame_desc[i].status;
+		pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
+
+		if (status) {
+			DBG(3, "Error in isochronous frame");
+			(*f)->state = F_ERROR;
+			continue;
+		}
+
+		sof = (*(soi = pos) == 0xd8ff);
+
+		PDBGG("Isochrnous frame: length %u, #%u i,", len, i);
+
+		if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR)
+start_of_frame:
+			if (sof) {
+				(*f)->state = F_GRABBING;
+				(*f)->buf.bytesused = 0;
+				do_gettimeofday(&(*f)->buf.timestamp);
+				DBG(3, "SOF detected: new video frame");
+			}
+
+		if ((*f)->state == F_GRABBING) {
+			if (sof && (*f)->buf.bytesused)
+					goto end_of_frame;
+
+			if ((*f)->buf.bytesused + len > imagesize) {
+				DBG(3, "Video frame size exceeded");
+				(*f)->state = F_ERROR;
+				continue;
+			}
+
+			memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, len);
+			(*f)->buf.bytesused += len;
+
+			if ((*f)->buf.bytesused == imagesize) {
+				u32 b;
+end_of_frame:
+				b = (*f)->buf.bytesused;
+				(*f)->state = F_DONE;
+				(*f)->buf.sequence= ++cam->frame_count;
+				spin_lock(&cam->queue_lock);
+				list_move_tail(&(*f)->frame, &cam->outqueue);
+				if (!list_empty(&cam->inqueue))
+					(*f) = list_entry(cam->inqueue.next,
+						       struct zc0301_frame_t,
+							  frame);
+				else
+					(*f) = NULL;
+				spin_unlock(&cam->queue_lock);
+				DBG(3, "Video frame captured: : %lu bytes",
+				       (unsigned long)(b));
+
+				if (!(*f))
+					goto resubmit_urb;
+
+				if (sof)
+					goto start_of_frame;
+			}
+		}
+	}
+
+resubmit_urb:
+	urb->dev = cam->usbdev;
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0 && err != -EPERM) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "usb_submit_urb() failed");
+	}
+
+	wake_up_interruptible(&cam->wait_frame);
+}
+
+
+static int zc0301_start_transfer(struct zc0301_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	struct urb* urb;
+	const unsigned int wMaxPacketSize[] = {0, 128, 192, 256, 384,
+					       512, 768, 1023};
+	const unsigned int psz = wMaxPacketSize[ZC0301_ALTERNATE_SETTING];
+	s8 i, j;
+	int err = 0;
+
+	for (i = 0; i < ZC0301_URBS; i++) {
+		cam->transfer_buffer[i] = kzalloc(ZC0301_ISO_PACKETS * psz,
+						  GFP_KERNEL);
+		if (!cam->transfer_buffer[i]) {
+			err = -ENOMEM;
+			DBG(1, "Not enough memory");
+			goto free_buffers;
+		}
+	}
+
+	for (i = 0; i < ZC0301_URBS; i++) {
+		urb = usb_alloc_urb(ZC0301_ISO_PACKETS, GFP_KERNEL);
+		cam->urb[i] = urb;
+		if (!urb) {
+			err = -ENOMEM;
+			DBG(1, "usb_alloc_urb() failed");
+			goto free_urbs;
+		}
+		urb->dev = udev;
+		urb->context = cam;
+		urb->pipe = usb_rcvisocpipe(udev, 1);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->number_of_packets = ZC0301_ISO_PACKETS;
+		urb->complete = zc0301_urb_complete;
+		urb->transfer_buffer = cam->transfer_buffer[i];
+		urb->transfer_buffer_length = psz * ZC0301_ISO_PACKETS;
+		urb->interval = 1;
+		for (j = 0; j < ZC0301_ISO_PACKETS; j++) {
+			urb->iso_frame_desc[j].offset = psz * j;
+			urb->iso_frame_desc[j].length = psz;
+		}
+	}
+
+	err = usb_set_interface(udev, 0, ZC0301_ALTERNATE_SETTING);
+	if (err) {
+		DBG(1, "usb_set_interface() failed");
+		goto free_urbs;
+	}
+
+	cam->frame_current = NULL;
+
+	for (i = 0; i < ZC0301_URBS; i++) {
+		err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
+		if (err) {
+			for (j = i-1; j >= 0; j--)
+				usb_kill_urb(cam->urb[j]);
+			DBG(1, "usb_submit_urb() failed, error %d", err);
+			goto free_urbs;
+		}
+	}
+
+	return 0;
+
+free_urbs:
+	for (i = 0; (i < ZC0301_URBS) &&  cam->urb[i]; i++)
+		usb_free_urb(cam->urb[i]);
+
+free_buffers:
+	for (i = 0; (i < ZC0301_URBS) && cam->transfer_buffer[i]; i++)
+		kfree(cam->transfer_buffer[i]);
+
+	return err;
+}
+
+
+static int zc0301_stop_transfer(struct zc0301_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	s8 i;
+	int err = 0;
+
+	if (cam->state & DEV_DISCONNECTED)
+		return 0;
+
+	for (i = ZC0301_URBS-1; i >= 0; i--) {
+		usb_kill_urb(cam->urb[i]);
+		usb_free_urb(cam->urb[i]);
+		kfree(cam->transfer_buffer[i]);
+	}
+
+	err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
+	if (err)
+		DBG(3, "usb_set_interface() failed");
+
+	return err;
+}
+
+
+static int zc0301_stream_interrupt(struct zc0301_device* cam)
+{
+	long timeout;
+
+	cam->stream = STREAM_INTERRUPT;
+	timeout = wait_event_timeout(cam->wait_stream,
+				     (cam->stream == STREAM_OFF) ||
+				     (cam->state & DEV_DISCONNECTED),
+				     ZC0301_URB_TIMEOUT);
+	if (cam->state & DEV_DISCONNECTED)
+		return -ENODEV;
+	else if (cam->stream != STREAM_OFF) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "URB timeout reached. The camera is misconfigured. To "
+		       "use it, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*****************************************************************************/
+
+static int
+zc0301_set_compression(struct zc0301_device* cam,
+		       struct v4l2_jpegcompression* compression)
+{
+	int r, err = 0;
+
+	if ((r = zc0301_read_reg(cam, 0x0008)) < 0)
+		err += r;
+	err += zc0301_write_reg(cam, 0x0008, r | 0x11 | compression->quality);
+
+	return err ? -EIO : 0;
+}
+
+
+static int zc0301_init(struct zc0301_device* cam)
+{
+	struct zc0301_sensor* s = &cam->sensor;
+	struct v4l2_control ctrl;
+	struct v4l2_queryctrl *qctrl;
+	struct v4l2_rect* rect;
+	u8 i = 0;
+	int err = 0;
+
+	if (!(cam->state & DEV_INITIALIZED)) {
+		init_waitqueue_head(&cam->open);
+		qctrl = s->qctrl;
+		rect = &(s->cropcap.defrect);
+		cam->compression.quality = ZC0301_COMPRESSION_QUALITY;
+	} else { /* use current values */
+		qctrl = s->_qctrl;
+		rect = &(s->_rect);
+	}
+
+	if (s->init) {
+		err = s->init(cam);
+		if (err) {
+			DBG(3, "Sensor initialization failed");
+			return err;
+		}
+	}
+
+	if ((err = zc0301_set_compression(cam, &cam->compression))) {
+		DBG(3, "set_compression() failed");
+		return err;
+	}
+
+	if (s->set_crop)
+		if ((err = s->set_crop(cam, rect))) {
+			DBG(3, "set_crop() failed");
+			return err;
+		}
+
+	if (s->set_ctrl) {
+		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+			if (s->qctrl[i].id != 0 &&
+			    !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) {
+				ctrl.id = s->qctrl[i].id;
+				ctrl.value = qctrl[i].default_value;
+				err = s->set_ctrl(cam, &ctrl);
+				if (err) {
+					DBG(3, "Set %s control failed",
+					    s->qctrl[i].name);
+					return err;
+				}
+				DBG(3, "Image sensor supports '%s' control",
+				    s->qctrl[i].name);
+			}
+	}
+
+	if (!(cam->state & DEV_INITIALIZED)) {
+		mutex_init(&cam->fileop_mutex);
+		spin_lock_init(&cam->queue_lock);
+		init_waitqueue_head(&cam->wait_frame);
+		init_waitqueue_head(&cam->wait_stream);
+		cam->nreadbuffers = 2;
+		memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl));
+		memcpy(&(s->_rect), &(s->cropcap.defrect),
+		       sizeof(struct v4l2_rect));
+		cam->state |= DEV_INITIALIZED;
+	}
+
+	DBG(2, "Initialization succeeded");
+	return 0;
+}
+
+
+static void zc0301_release_resources(struct zc0301_device* cam)
+{
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	video_set_drvdata(cam->v4ldev, NULL);
+	video_unregister_device(cam->v4ldev);
+	kfree(cam->control_buffer);
+}
+
+/*****************************************************************************/
+
+static int zc0301_open(struct inode* inode, struct file* filp)
+{
+	struct zc0301_device* cam;
+	int err = 0;
+
+	/*
+	   This is the only safe way to prevent race conditions with
+	   disconnect
+	*/
+	if (!down_read_trylock(&zc0301_disconnect))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(video_devdata(filp));
+
+	if (mutex_lock_interruptible(&cam->dev_mutex)) {
+		up_read(&zc0301_disconnect);
+		return -ERESTARTSYS;
+	}
+
+	if (cam->users) {
+		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+		if ((filp->f_flags & O_NONBLOCK) ||
+		    (filp->f_flags & O_NDELAY)) {
+			err = -EWOULDBLOCK;
+			goto out;
+		}
+		mutex_unlock(&cam->dev_mutex);
+		err = wait_event_interruptible_exclusive(cam->open,
+						  cam->state & DEV_DISCONNECTED
+							 || !cam->users);
+		if (err) {
+			up_read(&zc0301_disconnect);
+			return err;
+		}
+		if (cam->state & DEV_DISCONNECTED) {
+			up_read(&zc0301_disconnect);
+			return -ENODEV;
+		}
+		mutex_lock(&cam->dev_mutex);
+	}
+
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		err = zc0301_init(cam);
+		if (err) {
+			DBG(1, "Initialization failed again. "
+			       "I will retry on next open().");
+			goto out;
+		}
+		cam->state &= ~DEV_MISCONFIGURED;
+	}
+
+	if ((err = zc0301_start_transfer(cam)))
+		goto out;
+
+	filp->private_data = cam;
+	cam->users++;
+	cam->io = IO_NONE;
+	cam->stream = STREAM_OFF;
+	cam->nbuffers = 0;
+	cam->frame_count = 0;
+	zc0301_empty_framequeues(cam);
+
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+
+out:
+	mutex_unlock(&cam->dev_mutex);
+	up_read(&zc0301_disconnect);
+	return err;
+}
+
+
+static int zc0301_release(struct inode* inode, struct file* filp)
+{
+	struct zc0301_device* cam = video_get_drvdata(video_devdata(filp));
+
+	mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */
+
+	zc0301_stop_transfer(cam);
+
+	zc0301_release_buffers(cam);
+
+	if (cam->state & DEV_DISCONNECTED) {
+		zc0301_release_resources(cam);
+		usb_put_dev(cam->usbdev);
+		mutex_unlock(&cam->dev_mutex);
+		kfree(cam);
+		return 0;
+	}
+
+	cam->users--;
+	wake_up_interruptible_nr(&cam->open, 1);
+
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+
+	mutex_unlock(&cam->dev_mutex);
+
+	return 0;
+}
+
+
+static ssize_t
+zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
+{
+	struct zc0301_device* cam = video_get_drvdata(video_devdata(filp));
+	struct zc0301_frame_t* f, * i;
+	unsigned long lock_flags;
+	long timeout;
+	int err = 0;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	if (cam->io == IO_MMAP) {
+		DBG(3, "Close and open the device again to choose the read "
+		       "method");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EINVAL;
+	}
+
+	if (cam->io == IO_NONE) {
+		if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) {
+			DBG(1, "read() failed, not enough memory");
+			mutex_unlock(&cam->fileop_mutex);
+			return -ENOMEM;
+		}
+		cam->io = IO_READ;
+		cam->stream = STREAM_ON;
+	}
+
+	if (list_empty(&cam->inqueue)) {
+		if (!list_empty(&cam->outqueue))
+			zc0301_empty_framequeues(cam);
+		zc0301_queue_unusedframes(cam);
+	}
+
+	if (!count) {
+		mutex_unlock(&cam->fileop_mutex);
+		return 0;
+	}
+
+	if (list_empty(&cam->outqueue)) {
+		if (filp->f_flags & O_NONBLOCK) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -EAGAIN;
+		}
+		timeout = wait_event_interruptible_timeout
+			  ( cam->wait_frame,
+			    (!list_empty(&cam->outqueue)) ||
+			    (cam->state & DEV_DISCONNECTED) ||
+			    (cam->state & DEV_MISCONFIGURED),
+			    cam->module_param.frame_timeout *
+			    1000 * msecs_to_jiffies(1) );
+		if (timeout < 0) {
+			mutex_unlock(&cam->fileop_mutex);
+			return timeout;
+		}
+		if (cam->state & DEV_DISCONNECTED) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -ENODEV;
+		}
+		if (!timeout || (cam->state & DEV_MISCONFIGURED)) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -EIO;
+		}
+	}
+
+	f = list_entry(cam->outqueue.prev, struct zc0301_frame_t, frame);
+
+	if (count > f->buf.bytesused)
+		count = f->buf.bytesused;
+
+	if (copy_to_user(buf, f->bufmem, count)) {
+		err = -EFAULT;
+		goto exit;
+	}
+	*f_pos += count;
+
+exit:
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	list_for_each_entry(i, &cam->outqueue, frame)
+		i->state = F_UNUSED;
+	INIT_LIST_HEAD(&cam->outqueue);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	zc0301_queue_unusedframes(cam);
+
+	PDBGG("Frame #%lu, bytes read: %zu",
+	      (unsigned long)f->buf.index, count);
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return err ? err : count;
+}
+
+
+static unsigned int zc0301_poll(struct file *filp, poll_table *wait)
+{
+	struct zc0301_device* cam = video_get_drvdata(video_devdata(filp));
+	struct zc0301_frame_t* f;
+	unsigned long lock_flags;
+	unsigned int mask = 0;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return POLLERR;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		goto error;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		goto error;
+	}
+
+	if (cam->io == IO_NONE) {
+		if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) {
+			DBG(1, "poll() failed, not enough memory");
+			goto error;
+		}
+		cam->io = IO_READ;
+		cam->stream = STREAM_ON;
+	}
+
+	if (cam->io == IO_READ) {
+		spin_lock_irqsave(&cam->queue_lock, lock_flags);
+		list_for_each_entry(f, &cam->outqueue, frame)
+			f->state = F_UNUSED;
+		INIT_LIST_HEAD(&cam->outqueue);
+		spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+		zc0301_queue_unusedframes(cam);
+	}
+
+	poll_wait(filp, &cam->wait_frame, wait);
+
+	if (!list_empty(&cam->outqueue))
+		mask |= POLLIN | POLLRDNORM;
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return mask;
+
+error:
+	mutex_unlock(&cam->fileop_mutex);
+	return POLLERR;
+}
+
+
+static void zc0301_vm_open(struct vm_area_struct* vma)
+{
+	struct zc0301_frame_t* f = vma->vm_private_data;
+	f->vma_use_count++;
+}
+
+
+static void zc0301_vm_close(struct vm_area_struct* vma)
+{
+	/* NOTE: buffers are not freed here */
+	struct zc0301_frame_t* f = vma->vm_private_data;
+	f->vma_use_count--;
+}
+
+
+static struct vm_operations_struct zc0301_vm_ops = {
+	.open = zc0301_vm_open,
+	.close = zc0301_vm_close,
+};
+
+
+static int zc0301_mmap(struct file* filp, struct vm_area_struct *vma)
+{
+	struct zc0301_device* cam = video_get_drvdata(video_devdata(filp));
+	unsigned long size = vma->vm_end - vma->vm_start,
+		      start = vma->vm_start;
+	void *pos;
+	u32 i;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
+	    size != PAGE_ALIGN(cam->frame[0].buf.length)) {
+		mutex_unlock(&cam->fileop_mutex);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff)
+			break;
+	}
+	if (i == cam->nbuffers) {
+		mutex_unlock(&cam->fileop_mutex);
+		return -EINVAL;
+	}
+
+	vma->vm_flags |= VM_IO;
+	vma->vm_flags |= VM_RESERVED;
+
+	pos = cam->frame[i].bufmem;
+	while (size > 0) { /* size is page-aligned */
+		if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
+			mutex_unlock(&cam->fileop_mutex);
+			return -EAGAIN;
+		}
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	vma->vm_ops = &zc0301_vm_ops;
+	vma->vm_private_data = &cam->frame[i];
+
+	zc0301_vm_open(vma);
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return 0;
+}
+
+/*****************************************************************************/
+
+static int
+zc0301_vidioc_querycap(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_capability cap = {
+		.driver = "zc0301",
+		.version = ZC0301_MODULE_VERSION_CODE,
+		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+				V4L2_CAP_STREAMING,
+	};
+
+	strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
+	if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
+		strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
+			sizeof(cap.bus_info));
+
+	if (copy_to_user(arg, &cap, sizeof(cap)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_enuminput(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_input i;
+
+	if (copy_from_user(&i, arg, sizeof(i)))
+		return -EFAULT;
+
+	if (i.index)
+		return -EINVAL;
+
+	memset(&i, 0, sizeof(i));
+	strcpy(i.name, "Camera");
+	i.type = V4L2_INPUT_TYPE_CAMERA;
+
+	if (copy_to_user(arg, &i, sizeof(i)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_g_input(struct zc0301_device* cam, void __user * arg)
+{
+	int index = 0;
+
+	if (copy_to_user(arg, &index, sizeof(index)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_s_input(struct zc0301_device* cam, void __user * arg)
+{
+	int index;
+
+	if (copy_from_user(&index, arg, sizeof(index)))
+		return -EFAULT;
+
+	if (index != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_query_ctrl(struct zc0301_device* cam, void __user * arg)
+{
+	struct zc0301_sensor* s = &cam->sensor;
+	struct v4l2_queryctrl qc;
+	u8 i;
+
+	if (copy_from_user(&qc, arg, sizeof(qc)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (qc.id && qc.id == s->qctrl[i].id) {
+			memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
+			if (copy_to_user(arg, &qc, sizeof(qc)))
+				return -EFAULT;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+
+static int
+zc0301_vidioc_g_ctrl(struct zc0301_device* cam, void __user * arg)
+{
+	struct zc0301_sensor* s = &cam->sensor;
+	struct v4l2_control ctrl;
+	int err = 0;
+	u8 i;
+
+	if (!s->get_ctrl && !s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	if (!s->get_ctrl) {
+		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+			if (ctrl.id == s->qctrl[i].id) {
+				ctrl.value = s->_qctrl[i].default_value;
+				goto exit;
+			}
+		return -EINVAL;
+	} else
+		err = s->get_ctrl(cam, &ctrl);
+
+exit:
+	if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
+		return -EFAULT;
+
+	return err;
+}
+
+
+static int
+zc0301_vidioc_s_ctrl(struct zc0301_device* cam, void __user * arg)
+{
+	struct zc0301_sensor* s = &cam->sensor;
+	struct v4l2_control ctrl;
+	u8 i;
+	int err = 0;
+
+	if (!s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (ctrl.id == s->qctrl[i].id) {
+			if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)
+				return -EINVAL;
+			if (ctrl.value < s->qctrl[i].minimum ||
+			    ctrl.value > s->qctrl[i].maximum)
+				return -ERANGE;
+			ctrl.value -= ctrl.value % s->qctrl[i].step;
+			break;
+		}
+
+	if ((err = s->set_ctrl(cam, &ctrl)))
+		return err;
+
+	s->_qctrl[i].default_value = ctrl.value;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_cropcap(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_cropcap* cc = &(cam->sensor.cropcap);
+
+	cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	cc->pixelaspect.numerator = 1;
+	cc->pixelaspect.denominator = 1;
+
+	if (copy_to_user(arg, cc, sizeof(*cc)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_g_crop(struct zc0301_device* cam, void __user * arg)
+{
+	struct zc0301_sensor* s = &cam->sensor;
+	struct v4l2_crop crop = {
+		.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+	};
+
+	memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
+
+	if (copy_to_user(arg, &crop, sizeof(crop)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg)
+{
+	struct zc0301_sensor* s = &cam->sensor;
+	struct v4l2_crop crop;
+	struct v4l2_rect* rect;
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	const enum zc0301_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&crop, arg, sizeof(crop)))
+		return -EFAULT;
+
+	rect = &(crop.c);
+
+	if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_CROP failed. "
+				       "Unmap the buffers first.");
+				return -EINVAL;
+			}
+
+	if (!s->set_crop) {
+		memcpy(rect, &(s->_rect), sizeof(*rect));
+		if (copy_to_user(arg, &crop, sizeof(crop)))
+			return -EFAULT;
+		return 0;
+	}
+
+	rect->left &= ~7L;
+	rect->top &= ~7L;
+	if (rect->width < 8)
+		rect->width = 8;
+	if (rect->height < 8)
+		rect->height = 8;
+	if (rect->width > bounds->width)
+		rect->width = bounds->width;
+	if (rect->height > bounds->height)
+		rect->height = bounds->height;
+	if (rect->left < bounds->left)
+		rect->left = bounds->left;
+	if (rect->top < bounds->top)
+		rect->top = bounds->top;
+	if (rect->left + rect->width > bounds->left + bounds->width)
+		rect->left = bounds->left+bounds->width - rect->width;
+	if (rect->top + rect->height > bounds->top + bounds->height)
+		rect->top = bounds->top+bounds->height - rect->height;
+	rect->width &= ~7L;
+	rect->height &= ~7L;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = zc0301_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &crop, sizeof(crop))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap || cam->io == IO_READ)
+		zc0301_release_buffers(cam);
+
+	if (s->set_crop)
+		err += s->set_crop(cam, rect);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	s->pix_format.width = rect->width;
+	s->pix_format.height = rect->height;
+	memcpy(&(s->_rect), rect, sizeof(*rect));
+
+	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
+	    nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		zc0301_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		zc0301_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_enum_fmt(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_fmtdesc fmtd;
+
+	if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
+		return -EFAULT;
+
+	if (fmtd.index == 0) {
+		strcpy(fmtd.description, "JPEG");
+		fmtd.pixelformat = V4L2_PIX_FMT_JPEG;
+		fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
+	} else
+		return -EINVAL;
+
+	fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
+
+	if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_g_fmt(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_format format;
+	struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format);
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	pfmt->bytesperline = 0;
+	pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
+	pfmt->field = V4L2_FIELD_NONE;
+	memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
+
+	if (copy_to_user(arg, &format, sizeof(format)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd,
+			void __user * arg)
+{
+	struct zc0301_sensor* s = &cam->sensor;
+	struct v4l2_format format;
+	struct v4l2_pix_format* pix;
+	struct v4l2_pix_format* pfmt = &(s->pix_format);
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	struct v4l2_rect rect;
+	const enum zc0301_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	pix = &(format.fmt.pix);
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	memcpy(&rect, &(s->_rect), sizeof(rect));
+
+	if (!s->set_crop) {
+		pix->width = rect.width;
+		pix->height = rect.height;
+	} else {
+		rect.width = pix->width;
+		rect.height = pix->height;
+	}
+
+	if (rect.width < 8)
+		rect.width = 8;
+	if (rect.height < 8)
+		rect.height = 8;
+	if (rect.width > bounds->left + bounds->width - rect.left)
+		rect.width = bounds->left + bounds->width - rect.left;
+	if (rect.height > bounds->top + bounds->height - rect.top)
+		rect.height = bounds->top + bounds->height - rect.top;
+	rect.width &= ~7L;
+	rect.height &= ~7L;
+
+	pix->width = rect.width;
+	pix->height = rect.height;
+	pix->pixelformat = pfmt->pixelformat;
+	pix->priv = pfmt->priv;
+	pix->colorspace = pfmt->colorspace;
+	pix->bytesperline = 0;
+	pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
+	pix->field = V4L2_FIELD_NONE;
+
+	if (cmd == VIDIOC_TRY_FMT) {
+		if (copy_to_user(arg, &format, sizeof(format)))
+			return -EFAULT;
+		return 0;
+	}
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_FMT failed. "
+				       "Unmap the buffers first.");
+				return -EINVAL;
+			}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = zc0301_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &format, sizeof(format))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap || cam->io == IO_READ)
+		zc0301_release_buffers(cam);
+
+	if (s->set_crop)
+		err += s->set_crop(cam, &rect);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	memcpy(pfmt, pix, sizeof(*pix));
+	memcpy(&(s->_rect), &rect, sizeof(rect));
+
+	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
+	    nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		zc0301_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		zc0301_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_g_jpegcomp(struct zc0301_device* cam, void __user * arg)
+{
+	if (copy_to_user(arg, &cam->compression, sizeof(cam->compression)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_jpegcompression jc;
+	const enum zc0301_stream_state stream = cam->stream;
+	int err = 0;
+
+	if (copy_from_user(&jc, arg, sizeof(jc)))
+		return -EFAULT;
+
+	if (jc.quality != 0)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = zc0301_stream_interrupt(cam)))
+			return err;
+
+	err += zc0301_set_compression(cam, &jc);
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
+		       "problems. To use the camera, close and open "
+		       "/dev/video%d again.", cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	cam->compression.quality = jc.quality;
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_reqbufs(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_requestbuffers rb;
+	u32 i;
+	int err;
+
+	if (copy_from_user(&rb, arg, sizeof(rb)))
+		return -EFAULT;
+
+	if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    rb.memory != V4L2_MEMORY_MMAP)
+		return -EINVAL;
+
+	if (cam->io == IO_READ) {
+		DBG(3, "Close and open the device again to choose the mmap "
+		       "I/O method");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++)
+		if (cam->frame[i].vma_use_count) {
+			DBG(3, "VIDIOC_REQBUFS failed. "
+			       "Previous buffers are still mapped.");
+			return -EINVAL;
+		}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = zc0301_stream_interrupt(cam)))
+			return err;
+
+	zc0301_empty_framequeues(cam);
+
+	zc0301_release_buffers(cam);
+	if (rb.count)
+		rb.count = zc0301_request_buffers(cam, rb.count, IO_MMAP);
+
+	if (copy_to_user(arg, &rb, sizeof(rb))) {
+		zc0301_release_buffers(cam);
+		cam->io = IO_NONE;
+		return -EFAULT;
+	}
+
+	cam->io = rb.count ? IO_MMAP : IO_NONE;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_querybuf(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
+
+	if (cam->frame[b.index].vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (cam->frame[b.index].state == F_DONE)
+		b.flags |= V4L2_BUF_FLAG_DONE;
+	else if (cam->frame[b.index].state != F_UNUSED)
+		b.flags |= V4L2_BUF_FLAG_QUEUED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_qbuf(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+	unsigned long lock_flags;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->frame[b.index].state != F_UNUSED)
+		return -EINVAL;
+
+	cam->frame[b.index].state = F_QUEUED;
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	PDBGG("Frame #%lu queued", (unsigned long)b.index);
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_dqbuf(struct zc0301_device* cam, struct file* filp,
+		    void __user * arg)
+{
+	struct v4l2_buffer b;
+	struct zc0301_frame_t *f;
+	unsigned long lock_flags;
+	long timeout;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->outqueue)) {
+		if (cam->stream == STREAM_OFF)
+			return -EINVAL;
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		timeout = wait_event_interruptible_timeout
+			  ( cam->wait_frame,
+			    (!list_empty(&cam->outqueue)) ||
+			    (cam->state & DEV_DISCONNECTED) ||
+			    (cam->state & DEV_MISCONFIGURED),
+			    cam->module_param.frame_timeout *
+			    1000 * msecs_to_jiffies(1) );
+		if (timeout < 0)
+			return timeout;
+		if (cam->state & DEV_DISCONNECTED)
+			return -ENODEV;
+		if (!timeout || (cam->state & DEV_MISCONFIGURED))
+			return -EIO;
+	}
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	f = list_entry(cam->outqueue.next, struct zc0301_frame_t, frame);
+	list_del(cam->outqueue.next);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	f->state = F_UNUSED;
+
+	memcpy(&b, &f->buf, sizeof(b));
+	if (f->vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_streamon(struct zc0301_device* cam, void __user * arg)
+{
+	int type;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->inqueue))
+		return -EINVAL;
+
+	cam->stream = STREAM_ON;
+
+	DBG(3, "Stream on");
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_streamoff(struct zc0301_device* cam, void __user * arg)
+{
+	int type, err;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = zc0301_stream_interrupt(cam)))
+			return err;
+
+	zc0301_empty_framequeues(cam);
+
+	DBG(3, "Stream off");
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_g_parm(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+	sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+zc0301_vidioc_s_parm(struct zc0301_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+
+	if (sp.parm.capture.readbuffers == 0)
+		sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (sp.parm.capture.readbuffers > ZC0301_MAX_FRAMES)
+		sp.parm.capture.readbuffers = ZC0301_MAX_FRAMES;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	cam->nreadbuffers = sp.parm.capture.readbuffers;
+
+	return 0;
+}
+
+
+static int zc0301_ioctl_v4l2(struct inode* inode, struct file* filp,
+			     unsigned int cmd, void __user * arg)
+{
+	struct zc0301_device* cam = video_get_drvdata(video_devdata(filp));
+
+	switch (cmd) {
+
+	case VIDIOC_QUERYCAP:
+		return zc0301_vidioc_querycap(cam, arg);
+
+	case VIDIOC_ENUMINPUT:
+		return zc0301_vidioc_enuminput(cam, arg);
+
+	case VIDIOC_G_INPUT:
+		return zc0301_vidioc_g_input(cam, arg);
+
+	case VIDIOC_S_INPUT:
+		return zc0301_vidioc_s_input(cam, arg);
+
+	case VIDIOC_QUERYCTRL:
+		return zc0301_vidioc_query_ctrl(cam, arg);
+
+	case VIDIOC_G_CTRL:
+		return zc0301_vidioc_g_ctrl(cam, arg);
+
+	case VIDIOC_S_CTRL_OLD:
+	case VIDIOC_S_CTRL:
+		return zc0301_vidioc_s_ctrl(cam, arg);
+
+	case VIDIOC_CROPCAP_OLD:
+	case VIDIOC_CROPCAP:
+		return zc0301_vidioc_cropcap(cam, arg);
+
+	case VIDIOC_G_CROP:
+		return zc0301_vidioc_g_crop(cam, arg);
+
+	case VIDIOC_S_CROP:
+		return zc0301_vidioc_s_crop(cam, arg);
+
+	case VIDIOC_ENUM_FMT:
+		return zc0301_vidioc_enum_fmt(cam, arg);
+
+	case VIDIOC_G_FMT:
+		return zc0301_vidioc_g_fmt(cam, arg);
+
+	case VIDIOC_TRY_FMT:
+	case VIDIOC_S_FMT:
+		return zc0301_vidioc_try_s_fmt(cam, cmd, arg);
+
+	case VIDIOC_G_JPEGCOMP:
+		return zc0301_vidioc_g_jpegcomp(cam, arg);
+
+	case VIDIOC_S_JPEGCOMP:
+		return zc0301_vidioc_s_jpegcomp(cam, arg);
+
+	case VIDIOC_REQBUFS:
+		return zc0301_vidioc_reqbufs(cam, arg);
+
+	case VIDIOC_QUERYBUF:
+		return zc0301_vidioc_querybuf(cam, arg);
+
+	case VIDIOC_QBUF:
+		return zc0301_vidioc_qbuf(cam, arg);
+
+	case VIDIOC_DQBUF:
+		return zc0301_vidioc_dqbuf(cam, filp, arg);
+
+	case VIDIOC_STREAMON:
+		return zc0301_vidioc_streamon(cam, arg);
+
+	case VIDIOC_STREAMOFF:
+		return zc0301_vidioc_streamoff(cam, arg);
+
+	case VIDIOC_G_PARM:
+		return zc0301_vidioc_g_parm(cam, arg);
+
+	case VIDIOC_S_PARM_OLD:
+	case VIDIOC_S_PARM:
+		return zc0301_vidioc_s_parm(cam, arg);
+
+	case VIDIOC_G_STD:
+	case VIDIOC_S_STD:
+	case VIDIOC_QUERYSTD:
+	case VIDIOC_ENUMSTD:
+	case VIDIOC_QUERYMENU:
+		return -EINVAL;
+
+	default:
+		return -EINVAL;
+
+	}
+}
+
+
+static int zc0301_ioctl(struct inode* inode, struct file* filp,
+			unsigned int cmd, unsigned long arg)
+{
+	struct zc0301_device* cam = video_get_drvdata(video_devdata(filp));
+	int err = 0;
+
+	if (mutex_lock_interruptible(&cam->fileop_mutex))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		mutex_unlock(&cam->fileop_mutex);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		mutex_unlock(&cam->fileop_mutex);
+		return -EIO;
+	}
+
+	V4LDBG(3, "zc0301", cmd);
+
+	err = zc0301_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
+
+	mutex_unlock(&cam->fileop_mutex);
+
+	return err;
+}
+
+
+static struct file_operations zc0301_fops = {
+	.owner =   THIS_MODULE,
+	.open =    zc0301_open,
+	.release = zc0301_release,
+	.ioctl =   zc0301_ioctl,
+	.read =    zc0301_read,
+	.poll =    zc0301_poll,
+	.mmap =    zc0301_mmap,
+	.llseek =  no_llseek,
+};
+
+/*****************************************************************************/
+
+static int
+zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct zc0301_device* cam;
+	static unsigned int dev_nr = 0;
+	unsigned int i;
+	int err = 0;
+
+	if (!(cam = kzalloc(sizeof(struct zc0301_device), GFP_KERNEL)))
+		return -ENOMEM;
+
+	cam->usbdev = udev;
+
+	if (!(cam->control_buffer = kzalloc(4, GFP_KERNEL))) {
+		DBG(1, "kmalloc() failed");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	if (!(cam->v4ldev = video_device_alloc())) {
+		DBG(1, "video_device_alloc() failed");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	mutex_init(&cam->dev_mutex);
+
+	DBG(2, "ZC0301 Image Processor and Control Chip detected "
+	       "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct);
+
+	for  (i = 0; zc0301_sensor_table[i]; i++) {
+		err = zc0301_sensor_table[i](cam);
+		if (!err)
+			break;
+	}
+
+	if (!err)
+		DBG(2, "%s image sensor detected", cam->sensor.name);
+	else {
+		DBG(1, "No supported image sensor detected");
+		err = -ENODEV;
+		goto fail;
+	}
+
+	if (zc0301_init(cam)) {
+		DBG(1, "Initialization failed. I will retry on open().");
+		cam->state |= DEV_MISCONFIGURED;
+	}
+
+	strcpy(cam->v4ldev->name, "ZC0301 PC Camera");
+	cam->v4ldev->owner = THIS_MODULE;
+	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
+	cam->v4ldev->hardware = 0;
+	cam->v4ldev->fops = &zc0301_fops;
+	cam->v4ldev->minor = video_nr[dev_nr];
+	cam->v4ldev->release = video_device_release;
+	video_set_drvdata(cam->v4ldev, cam);
+
+	mutex_lock(&cam->dev_mutex);
+
+	err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
+				    video_nr[dev_nr]);
+	if (err) {
+		DBG(1, "V4L2 device registration failed");
+		if (err == -ENFILE && video_nr[dev_nr] == -1)
+			DBG(1, "Free /dev/videoX node not found");
+		video_nr[dev_nr] = -1;
+		dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0;
+		mutex_unlock(&cam->dev_mutex);
+		goto fail;
+	}
+
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+
+	cam->module_param.force_munmap = force_munmap[dev_nr];
+	cam->module_param.frame_timeout = frame_timeout[dev_nr];
+
+	dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0;
+
+	usb_set_intfdata(intf, cam);
+
+	mutex_unlock(&cam->dev_mutex);
+
+	return 0;
+
+fail:
+	if (cam) {
+		kfree(cam->control_buffer);
+		if (cam->v4ldev)
+			video_device_release(cam->v4ldev);
+		kfree(cam);
+	}
+	return err;
+}
+
+
+static void zc0301_usb_disconnect(struct usb_interface* intf)
+{
+	struct zc0301_device* cam = usb_get_intfdata(intf);
+
+	if (!cam)
+		return;
+
+	down_write(&zc0301_disconnect);
+
+	mutex_lock(&cam->dev_mutex);
+
+	DBG(2, "Disconnecting %s...", cam->v4ldev->name);
+
+	wake_up_interruptible_all(&cam->open);
+
+	if (cam->users) {
+		DBG(2, "Device /dev/video%d is open! Deregistration and "
+		       "memory deallocation are deferred on close.",
+		    cam->v4ldev->minor);
+		cam->state |= DEV_MISCONFIGURED;
+		zc0301_stop_transfer(cam);
+		cam->state |= DEV_DISCONNECTED;
+		wake_up_interruptible(&cam->wait_frame);
+		wake_up(&cam->wait_stream);
+		usb_get_dev(cam->usbdev);
+	} else {
+		cam->state |= DEV_DISCONNECTED;
+		zc0301_release_resources(cam);
+	}
+
+	mutex_unlock(&cam->dev_mutex);
+
+	if (!cam->users)
+		kfree(cam);
+
+	up_write(&zc0301_disconnect);
+}
+
+
+static struct usb_driver zc0301_usb_driver = {
+	.name =       "zc0301",
+	.id_table =   zc0301_id_table,
+	.probe =      zc0301_usb_probe,
+	.disconnect = zc0301_usb_disconnect,
+};
+
+/*****************************************************************************/
+
+static int __init zc0301_module_init(void)
+{
+	int err = 0;
+
+	KDBG(2, ZC0301_MODULE_NAME " v" ZC0301_MODULE_VERSION);
+	KDBG(3, ZC0301_MODULE_AUTHOR);
+
+	if ((err = usb_register(&zc0301_usb_driver)))
+		KDBG(1, "usb_register() failed");
+
+	return err;
+}
+
+
+static void __exit zc0301_module_exit(void)
+{
+	usb_deregister(&zc0301_usb_driver);
+}
+
+
+module_init(zc0301_module_init);
+module_exit(zc0301_module_exit);
diff --git a/drivers/media/video/zc0301/zc0301_pas202bcb.c b/drivers/media/video/zc0301/zc0301_pas202bcb.c
new file mode 100644
index 000000000000..eaadf0252049
--- /dev/null
+++ b/drivers/media/video/zc0301/zc0301_pas202bcb.c
@@ -0,0 +1,361 @@
+/***************************************************************************
+ * Plug-in for PAS202BCB image sensor connected to the ZC030! Image        *
+ * Processor and Control Chip                                              *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * Initialization values of the ZC0301 have been taken from the SPCA5XX    *
+ * driver maintained by Michel Xhaard <mxhaard@magic.fr>                   *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+/*
+   NOTE: Sensor controls are disabled for now, becouse changing them while
+	 streaming sometimes results in out-of-sync video frames. We'll use
+	 the default initialization, until we know how to stop and start video
+	 in the chip. However, the image quality still looks good under various
+	 light conditions.
+*/
+
+#include <linux/delay.h>
+#include "zc0301_sensor.h"
+
+
+static struct zc0301_sensor pas202bcb;
+
+
+static int pas202bcb_init(struct zc0301_device* cam)
+{
+	int err = 0;
+
+	err += zc0301_write_reg(cam, 0x0002, 0x00);
+	err += zc0301_write_reg(cam, 0x0003, 0x02);
+	err += zc0301_write_reg(cam, 0x0004, 0x80);
+	err += zc0301_write_reg(cam, 0x0005, 0x01);
+	err += zc0301_write_reg(cam, 0x0006, 0xE0);
+	err += zc0301_write_reg(cam, 0x0098, 0x00);
+	err += zc0301_write_reg(cam, 0x009A, 0x03);
+	err += zc0301_write_reg(cam, 0x011A, 0x00);
+	err += zc0301_write_reg(cam, 0x011C, 0x03);
+	err += zc0301_write_reg(cam, 0x009B, 0x01);
+	err += zc0301_write_reg(cam, 0x009C, 0xE6);
+	err += zc0301_write_reg(cam, 0x009D, 0x02);
+	err += zc0301_write_reg(cam, 0x009E, 0x86);
+
+	err += zc0301_i2c_write(cam, 0x02, 0x02);
+	err += zc0301_i2c_write(cam, 0x0A, 0x01);
+	err += zc0301_i2c_write(cam, 0x0B, 0x01);
+	err += zc0301_i2c_write(cam, 0x0D, 0x00);
+	err += zc0301_i2c_write(cam, 0x12, 0x05);
+	err += zc0301_i2c_write(cam, 0x13, 0x63);
+	err += zc0301_i2c_write(cam, 0x15, 0x70);
+
+	err += zc0301_write_reg(cam, 0x0101, 0xB7);
+	err += zc0301_write_reg(cam, 0x0100, 0x0D);
+	err += zc0301_write_reg(cam, 0x0189, 0x06);
+	err += zc0301_write_reg(cam, 0x01AD, 0x00);
+	err += zc0301_write_reg(cam, 0x01C5, 0x03);
+	err += zc0301_write_reg(cam, 0x01CB, 0x13);
+	err += zc0301_write_reg(cam, 0x0250, 0x08);
+	err += zc0301_write_reg(cam, 0x0301, 0x08);
+	err += zc0301_write_reg(cam, 0x018D, 0x70);
+	err += zc0301_write_reg(cam, 0x0008, 0x03);
+	err += zc0301_write_reg(cam, 0x01C6, 0x04);
+	err += zc0301_write_reg(cam, 0x01CB, 0x07);
+	err += zc0301_write_reg(cam, 0x0120, 0x11);
+	err += zc0301_write_reg(cam, 0x0121, 0x37);
+	err += zc0301_write_reg(cam, 0x0122, 0x58);
+	err += zc0301_write_reg(cam, 0x0123, 0x79);
+	err += zc0301_write_reg(cam, 0x0124, 0x91);
+	err += zc0301_write_reg(cam, 0x0125, 0xA6);
+	err += zc0301_write_reg(cam, 0x0126, 0xB8);
+	err += zc0301_write_reg(cam, 0x0127, 0xC7);
+	err += zc0301_write_reg(cam, 0x0128, 0xD3);
+	err += zc0301_write_reg(cam, 0x0129, 0xDE);
+	err += zc0301_write_reg(cam, 0x012A, 0xE6);
+	err += zc0301_write_reg(cam, 0x012B, 0xED);
+	err += zc0301_write_reg(cam, 0x012C, 0xF3);
+	err += zc0301_write_reg(cam, 0x012D, 0xF8);
+	err += zc0301_write_reg(cam, 0x012E, 0xFB);
+	err += zc0301_write_reg(cam, 0x012F, 0xFF);
+	err += zc0301_write_reg(cam, 0x0130, 0x26);
+	err += zc0301_write_reg(cam, 0x0131, 0x23);
+	err += zc0301_write_reg(cam, 0x0132, 0x20);
+	err += zc0301_write_reg(cam, 0x0133, 0x1C);
+	err += zc0301_write_reg(cam, 0x0134, 0x16);
+	err += zc0301_write_reg(cam, 0x0135, 0x13);
+	err += zc0301_write_reg(cam, 0x0136, 0x10);
+	err += zc0301_write_reg(cam, 0x0137, 0x0D);
+	err += zc0301_write_reg(cam, 0x0138, 0x0B);
+	err += zc0301_write_reg(cam, 0x0139, 0x09);
+	err += zc0301_write_reg(cam, 0x013A, 0x07);
+	err += zc0301_write_reg(cam, 0x013B, 0x06);
+	err += zc0301_write_reg(cam, 0x013C, 0x05);
+	err += zc0301_write_reg(cam, 0x013D, 0x04);
+	err += zc0301_write_reg(cam, 0x013E, 0x03);
+	err += zc0301_write_reg(cam, 0x013F, 0x02);
+	err += zc0301_write_reg(cam, 0x010A, 0x4C);
+	err += zc0301_write_reg(cam, 0x010B, 0xF5);
+	err += zc0301_write_reg(cam, 0x010C, 0xFF);
+	err += zc0301_write_reg(cam, 0x010D, 0xF9);
+	err += zc0301_write_reg(cam, 0x010E, 0x51);
+	err += zc0301_write_reg(cam, 0x010F, 0xF5);
+	err += zc0301_write_reg(cam, 0x0110, 0xFB);
+	err += zc0301_write_reg(cam, 0x0111, 0xED);
+	err += zc0301_write_reg(cam, 0x0112, 0x5F);
+	err += zc0301_write_reg(cam, 0x0180, 0x00);
+	err += zc0301_write_reg(cam, 0x0019, 0x00);
+	err += zc0301_write_reg(cam, 0x0087, 0x20);
+	err += zc0301_write_reg(cam, 0x0088, 0x21);
+
+	err += zc0301_i2c_write(cam, 0x20, 0x02);
+	err += zc0301_i2c_write(cam, 0x21, 0x1B);
+	err += zc0301_i2c_write(cam, 0x03, 0x44);
+	err += zc0301_i2c_write(cam, 0x0E, 0x01);
+	err += zc0301_i2c_write(cam, 0x0F, 0x00);
+
+	err += zc0301_write_reg(cam, 0x01A9, 0x14);
+	err += zc0301_write_reg(cam, 0x01AA, 0x24);
+	err += zc0301_write_reg(cam, 0x0190, 0x00);
+	err += zc0301_write_reg(cam, 0x0191, 0x02);
+	err += zc0301_write_reg(cam, 0x0192, 0x1B);
+	err += zc0301_write_reg(cam, 0x0195, 0x00);
+	err += zc0301_write_reg(cam, 0x0196, 0x00);
+	err += zc0301_write_reg(cam, 0x0197, 0x4D);
+	err += zc0301_write_reg(cam, 0x018C, 0x10);
+	err += zc0301_write_reg(cam, 0x018F, 0x20);
+	err += zc0301_write_reg(cam, 0x001D, 0x44);
+	err += zc0301_write_reg(cam, 0x001E, 0x6F);
+	err += zc0301_write_reg(cam, 0x001F, 0xAD);
+	err += zc0301_write_reg(cam, 0x0020, 0xEB);
+	err += zc0301_write_reg(cam, 0x0087, 0x0F);
+	err += zc0301_write_reg(cam, 0x0088, 0x0E);
+	err += zc0301_write_reg(cam, 0x0180, 0x40);
+	err += zc0301_write_reg(cam, 0x0192, 0x1B);
+	err += zc0301_write_reg(cam, 0x0191, 0x02);
+	err += zc0301_write_reg(cam, 0x0190, 0x00);
+	err += zc0301_write_reg(cam, 0x0116, 0x1D);
+	err += zc0301_write_reg(cam, 0x0117, 0x40);
+	err += zc0301_write_reg(cam, 0x0118, 0x99);
+	err += zc0301_write_reg(cam, 0x0180, 0x42);
+	err += zc0301_write_reg(cam, 0x0116, 0x1D);
+	err += zc0301_write_reg(cam, 0x0117, 0x40);
+	err += zc0301_write_reg(cam, 0x0118, 0x99);
+	err += zc0301_write_reg(cam, 0x0007, 0x00);
+
+	err += zc0301_i2c_write(cam, 0x11, 0x01);
+
+	msleep(100);
+
+	return err;
+}
+
+
+static int pas202bcb_get_ctrl(struct zc0301_device* cam,
+			      struct v4l2_control* ctrl)
+{
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		{
+			int r1 = zc0301_i2c_read(cam, 0x04, 1),
+			    r2 = zc0301_i2c_read(cam, 0x05, 1);
+			if (r1 < 0 || r2 < 0)
+				return -EIO;
+			ctrl->value = (r1 << 6) | (r2 & 0x3f);
+		}
+		return 0;
+	case V4L2_CID_RED_BALANCE:
+		if ((ctrl->value = zc0301_i2c_read(cam, 0x09, 1)) < 0)
+			return -EIO;
+		ctrl->value &= 0x0f;
+		return 0;
+	case V4L2_CID_BLUE_BALANCE:
+		if ((ctrl->value = zc0301_i2c_read(cam, 0x07, 1)) < 0)
+			return -EIO;
+		ctrl->value &= 0x0f;
+		return 0;
+	case V4L2_CID_GAIN:
+		if ((ctrl->value = zc0301_i2c_read(cam, 0x10, 1)) < 0)
+			return -EIO;
+		ctrl->value &= 0x1f;
+		return 0;
+	case ZC0301_V4L2_CID_GREEN_BALANCE:
+		if ((ctrl->value = zc0301_i2c_read(cam, 0x08, 1)) < 0)
+			return -EIO;
+		ctrl->value &= 0x0f;
+		return 0;
+	case ZC0301_V4L2_CID_DAC_MAGNITUDE:
+		if ((ctrl->value = zc0301_i2c_read(cam, 0x0c, 1)) < 0)
+			return -EIO;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+
+static int pas202bcb_set_ctrl(struct zc0301_device* cam,
+			      const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		err += zc0301_i2c_write(cam, 0x04, ctrl->value >> 6);
+		err += zc0301_i2c_write(cam, 0x05, ctrl->value & 0x3f);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		err += zc0301_i2c_write(cam, 0x09, ctrl->value);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		err += zc0301_i2c_write(cam, 0x07, ctrl->value);
+		break;
+	case V4L2_CID_GAIN:
+		err += zc0301_i2c_write(cam, 0x10, ctrl->value);
+		break;
+	case ZC0301_V4L2_CID_GREEN_BALANCE:
+		err += zc0301_i2c_write(cam, 0x08, ctrl->value);
+		break;
+	case ZC0301_V4L2_CID_DAC_MAGNITUDE:
+		err += zc0301_i2c_write(cam, 0x0c, ctrl->value);
+		break;
+	default:
+		return -EINVAL;
+	}
+	err += zc0301_i2c_write(cam, 0x11, 0x01);
+
+	return err ? -EIO : 0;
+}
+
+
+static struct zc0301_sensor pas202bcb = {
+	.name = "PAS202BCB",
+	.init = &pas202bcb_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x01e5,
+			.maximum = 0x3fff,
+			.step = 0x0001,
+			.default_value = 0x01e5,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
+		},
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0x1f,
+			.step = 0x01,
+			.default_value = 0x0c,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
+		},
+		{
+			.id = ZC0301_V4L2_CID_DAC_MAGNITUDE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "DAC magnitude",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
+		},
+		{
+			.id = V4L2_CID_RED_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "red balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x01,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
+		},
+		{
+			.id = V4L2_CID_BLUE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "blue balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x05,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
+		},
+		{
+			.id = ZC0301_V4L2_CID_GREEN_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "green balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
+		},
+	},
+	.get_ctrl = &pas202bcb_get_ctrl,
+	.set_ctrl = &pas202bcb_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_JPEG,
+		.priv = 8,
+	},
+};
+
+
+int zc0301_probe_pas202bcb(struct zc0301_device* cam)
+{
+	int r0 = 0, r1 = 0, err = 0;
+	unsigned int pid = 0;
+
+	err += zc0301_write_reg(cam, 0x0000, 0x01);
+	err += zc0301_write_reg(cam, 0x0010, 0x0e);
+	err += zc0301_write_reg(cam, 0x0001, 0x01);
+	err += zc0301_write_reg(cam, 0x0012, 0x03);
+	err += zc0301_write_reg(cam, 0x0012, 0x01);
+	err += zc0301_write_reg(cam, 0x008d, 0x08);
+
+	msleep(10);
+
+	r0 = zc0301_i2c_read(cam, 0x00, 1);
+	r1 = zc0301_i2c_read(cam, 0x01, 1);
+
+	if (r0 < 0 || r1 < 0 || err)
+		return -EIO;
+
+	pid = (r0 << 4) | ((r1 & 0xf0) >> 4);
+	if (pid != 0x017)
+		return -ENODEV;
+
+	zc0301_attach_sensor(cam, &pas202bcb);
+
+	return 0;
+}
diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h
new file mode 100644
index 000000000000..1f95c28b1015
--- /dev/null
+++ b/drivers/media/video/zc0301/zc0301_sensor.h
@@ -0,0 +1,103 @@
+/***************************************************************************
+ * API for image sensors connected to the ZC030! Image Processor and       *
+ * Control Chip                                                            *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _ZC0301_SENSOR_H_
+#define _ZC0301_SENSOR_H_
+
+#include <linux/usb.h>
+#include <linux/videodev.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <asm/types.h>
+
+struct zc0301_device;
+struct zc0301_sensor;
+
+/*****************************************************************************/
+
+extern int zc0301_probe_pas202bcb(struct zc0301_device* cam);
+
+#define ZC0301_SENSOR_TABLE                                                   \
+/* Weak detections must go at the end of the list */                          \
+static int (*zc0301_sensor_table[])(struct zc0301_device*) = {                \
+	&zc0301_probe_pas202bcb,                                              \
+	NULL,                                                                 \
+};
+
+extern struct zc0301_device*
+zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id);
+
+extern void
+zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor);
+
+#define ZC0301_USB_DEVICE(vend, prod, intclass)                               \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |                           \
+		       USB_DEVICE_ID_MATCH_INT_CLASS,                         \
+	.idVendor = (vend),                                                   \
+	.idProduct = (prod),                                                  \
+	.bInterfaceClass = (intclass)
+
+#define ZC0301_ID_TABLE                                                       \
+static const struct usb_device_id zc0301_id_table[] =  {                      \
+	{ ZC0301_USB_DEVICE(0x041e, 0x4017, 0xff), },                         \
+	{ ZC0301_USB_DEVICE(0x041e, 0x401c, 0xff), }, /* PAS106 */            \
+	{ ZC0301_USB_DEVICE(0x041e, 0x401e, 0xff), }, /* HV7131B */           \
+	{ ZC0301_USB_DEVICE(0x041e, 0x4034, 0xff), }, /* PAS106 */            \
+	{ ZC0301_USB_DEVICE(0x041e, 0x4035, 0xff), }, /* PAS106 */            \
+	{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202BCB */         \
+	{ ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), },                         \
+	{ ZC0301_USB_DEVICE(0x10fd, 0x8050, 0xff), }, /* TAS5130D */          \
+	{ }                                                                   \
+};
+
+/*****************************************************************************/
+
+extern int zc0301_write_reg(struct zc0301_device*, u16 index, u16 value);
+extern int zc0301_read_reg(struct zc0301_device*, u16 index);
+extern int zc0301_i2c_write(struct zc0301_device*, u16 address, u16 value);
+extern int zc0301_i2c_read(struct zc0301_device*, u16 address, u8 length);
+
+/*****************************************************************************/
+
+#define ZC0301_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
+#define ZC0301_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE
+#define ZC0301_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1
+
+struct zc0301_sensor {
+	char name[32];
+
+	struct v4l2_queryctrl qctrl[ZC0301_MAX_CTRLS];
+	struct v4l2_cropcap cropcap;
+	struct v4l2_pix_format pix_format;
+
+	int (*init)(struct zc0301_device*);
+	int (*get_ctrl)(struct zc0301_device*, struct v4l2_control* ctrl);
+	int (*set_ctrl)(struct zc0301_device*,
+			const struct v4l2_control* ctrl);
+	int (*set_crop)(struct zc0301_device*, const struct v4l2_rect* rect);
+
+	/* Private */
+	struct v4l2_queryctrl _qctrl[ZC0301_MAX_CTRLS];
+	struct v4l2_rect _rect;
+};
+
+#endif /* _ZC0301_SENSOR_H_ */
diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h
index ad04a129499d..0166f555a5ca 100644
--- a/drivers/media/video/zoran.h
+++ b/drivers/media/video/zoran.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * zoran - Iomega Buz driver
  *
  * Copyright (C) 1999 Rainer Johanni <Rainer@Johanni.de>
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index b22dbb6d18f6..0a85c9e7fb48 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -4,7 +4,7 @@
  * Media Labs LML33/LML33R10.
  *
  * This part handles card-specific data and detection
- * 
+ *
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
  *
  * Currently maintained by:
diff --git a/drivers/media/video/zoran_card.h b/drivers/media/video/zoran_card.h
index e5b6acd3eedc..ad997c30bee5 100644
--- a/drivers/media/video/zoran_card.h
+++ b/drivers/media/video/zoran_card.h
@@ -4,7 +4,7 @@
  * Media Labs LML33/LML33R10.
  *
  * This part handles card-specific data and detection
- * 
+ *
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
  *
  * Currently maintained by:
diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c
index 4e15afdec4c9..c690b2ee880a 100644
--- a/drivers/media/video/zoran_device.c
+++ b/drivers/media/video/zoran_device.c
@@ -4,7 +4,7 @@
  * Media Labs LML33/LML33R10.
  *
  * This part handles device access (PCI/I2C/codec/...)
- * 
+ *
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
  *
  * Currently maintained by:
@@ -492,7 +492,7 @@ zr36057_set_vfe (struct zoran              *zr,
 	/* (Ronald) don't write this if overlay_mask = NULL */
 	if (zr->overlay_mask) {
 		/* Write overlay clipping mask data, but don't enable overlay clipping */
-		/* RJ: since this makes only sense on the screen, we use 
+		/* RJ: since this makes only sense on the screen, we use
 		 * zr->overlay_settings.width instead of video_width */
 
 		mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
@@ -819,12 +819,12 @@ zr36057_set_jpg (struct zoran          *zr,
 	if (zr->card.vfe_pol.hsync_pol)
 		btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
 	else
-		btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);		
+		btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
 	reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) |
 	      (tvn->Wt << ZR36057_HSP_LineTot);
 	btwrite(reg, ZR36057_HSP);
 	reg = ((zr->jpg_settings.img_x +
-	        tvn->HStart + 4) << ZR36057_FHAP_NAX) |
+		tvn->HStart + 4) << ZR36057_FHAP_NAX) |
 	      (zr->jpg_settings.img_width << ZR36057_FHAP_PAX);
 	btwrite(reg, ZR36057_FHAP);
 
@@ -1272,15 +1272,15 @@ error_handler (struct zoran *zr,
 	if (zr->JPEG_error != 1) {
 		/*
 		 * First entry: error just happened during normal operation
-		 * 
+		 *
 		 * In BUZ_MODE_MOTION_COMPRESS:
-		 * 
+		 *
 		 * Possible glitch in TV signal. In this case we should
 		 * stop the codec and wait for good quality signal before
 		 * restarting it to avoid further problems
-		 * 
+		 *
 		 * In BUZ_MODE_MOTION_DECOMPRESS:
-		 * 
+		 *
 		 * Bad JPEG frame: we have to mark it as processed (codec crashed
 		 * and was not able to do it itself), and to remove it from queue.
 		 */
diff --git a/drivers/media/video/zoran_device.h b/drivers/media/video/zoran_device.h
index f315203d7105..f19705cbdb39 100644
--- a/drivers/media/video/zoran_device.h
+++ b/drivers/media/video/zoran_device.h
@@ -4,7 +4,7 @@
  * Media Labs LML33/LML33R10.
  *
  * This part handles card-specific data and detection
- * 
+ *
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
  *
  * Currently maintained by:
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index b2c6e01e3923..b5a576a37fd2 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -94,7 +94,7 @@
 				V4L2_CAP_VIDEO_CAPTURE |\
 				V4L2_CAP_VIDEO_OUTPUT |\
 				V4L2_CAP_VIDEO_OVERLAY \
-                              )
+			      )
 #endif
 
 #include <asm/byteorder.h>
@@ -165,7 +165,7 @@ const struct zoran_format zoran_formats[] = {
 #endif
 		.depth = 16,
 		.flags = ZORAN_FORMAT_CAPTURE |
-		         ZORAN_FORMAT_OVERLAY,
+			 ZORAN_FORMAT_OVERLAY,
 	}, {
 		.name = "Hardware-encoded Motion-JPEG",
 		.palette = -1,
@@ -670,7 +670,7 @@ jpg_fbuffer_free (struct file *file)
 								       j]))));
 				free_page((unsigned long)
 					  bus_to_virt
-					          (le32_to_cpu
+						  (le32_to_cpu
 						   (fh->jpg_buffers.
 						      buffer[i].
 						      frag_tab[2 * j])));
@@ -1871,7 +1871,7 @@ zoran_v4l2_buffer_status (struct file        *file,
 
 static int
 zoran_set_norm (struct zoran *zr,
-	        int           norm) /* VIDEO_MODE_* */
+		int           norm) /* VIDEO_MODE_* */
 {
 	int norm_encoder, on;
 
@@ -2006,9 +2006,9 @@ zoran_set_input (struct zoran *zr,
 
 static int
 zoran_do_ioctl (struct inode *inode,
-	        struct file  *file,
-	        unsigned int  cmd,
-	        void         *arg)
+		struct file  *file,
+		unsigned int  cmd,
+		void         *arg)
 {
 	struct zoran_fh *fh = file->private_data;
 	struct zoran *zr = fh->zr;
@@ -2095,7 +2095,7 @@ zoran_do_ioctl (struct inode *inode,
 		break;
 
 		/* RJ: the documentation at http://roadrunner.swansea.linux.org.uk/v4lapi.shtml says:
-		 * 
+		 *
 		 * * "The VIDIOCSCHAN ioctl takes an integer argument and switches the capture to this input."
 		 * *                                 ^^^^^^^
 		 * * The famos BTTV driver has it implemented with a struct video_channel argument
diff --git a/drivers/media/video/zoran_procfs.c b/drivers/media/video/zoran_procfs.c
index f0d9b13c3c6c..a00fae90229a 100644
--- a/drivers/media/video/zoran_procfs.c
+++ b/drivers/media/video/zoran_procfs.c
@@ -4,7 +4,7 @@
  * Media Labs LML33/LML33R10.
  *
  * This part handles the procFS entries (/proc/ZORAN[%d])
- * 
+ *
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
  *
  * Currently maintained by:
diff --git a/drivers/media/video/zoran_procfs.h b/drivers/media/video/zoran_procfs.h
index 8904fc959555..f2d5b1ba448f 100644
--- a/drivers/media/video/zoran_procfs.h
+++ b/drivers/media/video/zoran_procfs.h
@@ -4,7 +4,7 @@
  * Media Labs LML33/LML33R10.
  *
  * This part handles card-specific data and detection
- * 
+ *
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
  *
  * Currently maintained by:
diff --git a/drivers/media/video/zr36016.c b/drivers/media/video/zr36016.c
index 10130ef67ea7..62f77584fb85 100644
--- a/drivers/media/video/zr36016.c
+++ b/drivers/media/video/zr36016.c
@@ -34,7 +34,7 @@
 #include <linux/types.h>
 #include <linux/wait.h>
 
-/* includes for structures and defines regarding video 
+/* includes for structures and defines regarding video
    #include<linux/videodev.h> */
 
 /* I/O commands, error codes */
@@ -143,8 +143,8 @@ zr36016_readi (struct zr36016 *ptr,
 
 static void
 zr36016_writei (struct zr36016 *ptr,
-	        u16             reg,
-	        u8              value)
+		u16             reg,
+		u8              value)
 {
 	dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name,
 		value, reg);
@@ -192,7 +192,7 @@ zr36016_basic_test (struct zr36016 *ptr)
 		dprintk(1, "\n");
 	}
 	// for testing just write 0, then the default value to a register and read
-	// it back in both cases 
+	// it back in both cases
 	zr36016_writei(ptr, ZR016I_PAX_LO, 0x00);
 	if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) {
 		dprintk(1,
@@ -232,17 +232,17 @@ zr36016_basic_test (struct zr36016 *ptr)
 static int zr36016_pushit (struct zr36016 *ptr,
 			   u16             startreg,
 			   u16             len,
-                           const char     *data)
+			   const char     *data)
 {
-        int i=0;
+	int i=0;
 
-        dprintk(4, "%s: write data block to 0x%04x (len=%d)\n",
+	dprintk(4, "%s: write data block to 0x%04x (len=%d)\n",
 		ptr->name, startreg,len);
-        while (i<len) {
-                zr36016_writei(ptr, startreg++,  data[i++]);
-        }
+	while (i<len) {
+		zr36016_writei(ptr, startreg++,  data[i++]);
+	}
 
-        return i;
+	return i;
 }
 #endif
 
diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c
index 6699725be605..a6bbd125631c 100644
--- a/drivers/media/video/zr36050.c
+++ b/drivers/media/video/zr36050.c
@@ -34,7 +34,7 @@
 #include <linux/types.h>
 #include <linux/wait.h>
 
-/* includes for structures and defines regarding video 
+/* includes for structures and defines regarding video
    #include<linux/videodev.h> */
 
 /* I/O commands, error codes */
@@ -171,7 +171,7 @@ zr36050_wait_end (struct zr36050 *ptr)
 /* =========================================================================
    Local helper function:
 
-   basic test of "connectivity", writes/reads to/from memory the SOF marker 
+   basic test of "connectivity", writes/reads to/from memory the SOF marker
    ========================================================================= */
 
 static int
@@ -218,9 +218,9 @@ zr36050_basic_test (struct zr36050 *ptr)
 
 static int
 zr36050_pushit (struct zr36050 *ptr,
-	        u16             startreg,
-	        u16             len,
-	        const char     *data)
+		u16             startreg,
+		u16             len,
+		const char     *data)
 {
 	int i = 0;
 
@@ -345,7 +345,7 @@ static const char zr36050_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 };
 /* ------------------------------------------------------------------------- */
 
 /* SOF (start of frame) segment depends on width, height and sampling ratio
-                         of each color component */
+			 of each color component */
 
 static int
 zr36050_set_sof (struct zr36050 *ptr)
@@ -376,8 +376,8 @@ zr36050_set_sof (struct zr36050 *ptr)
 
 /* ------------------------------------------------------------------------- */
 
-/* SOS (start of scan) segment depends on the used scan components 
-                        of each color component */
+/* SOS (start of scan) segment depends on the used scan components
+			of each color component */
 
 static int
 zr36050_set_sos (struct zr36050 *ptr)
diff --git a/drivers/media/video/zr36057.h b/drivers/media/video/zr36057.h
index 159abfa034d9..54c9362aa980 100644
--- a/drivers/media/video/zr36057.h
+++ b/drivers/media/video/zr36057.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * zr36057.h - zr36057 register offsets
  *
  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
@@ -27,14 +27,14 @@
 #define ZR36057_VFEHCR          0x000	/* Video Front End, Horizontal Configuration Register */
 #define ZR36057_VFEHCR_HSPol            (1<<30)
 #define ZR36057_VFEHCR_HStart           10
-#define ZR36057_VFEHCR_HEnd	        0
-#define ZR36057_VFEHCR_Hmask	        0x3ff
+#define ZR36057_VFEHCR_HEnd		0
+#define ZR36057_VFEHCR_Hmask		0x3ff
 
 #define ZR36057_VFEVCR          0x004	/* Video Front End, Vertical Configuration Register */
 #define ZR36057_VFEVCR_VSPol            (1<<30)
 #define ZR36057_VFEVCR_VStart           10
-#define ZR36057_VFEVCR_VEnd	        0
-#define ZR36057_VFEVCR_Vmask	        0x3ff
+#define ZR36057_VFEVCR_VEnd		0
+#define ZR36057_VFEVCR_Vmask		0x3ff
 
 #define ZR36057_VFESPFR         0x008	/* Video Front End, Scaler and Pixel Format Register */
 #define ZR36057_VFESPFR_ExtFl           (1<<26)
diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c
index d8dd003a7aad..97c8f9b9dc12 100644
--- a/drivers/media/video/zr36060.c
+++ b/drivers/media/video/zr36060.c
@@ -34,7 +34,7 @@
 #include <linux/types.h>
 #include <linux/wait.h>
 
-/* includes for structures and defines regarding video 
+/* includes for structures and defines regarding video
    #include<linux/videodev.h> */
 
 /* I/O commands, error codes */
@@ -173,7 +173,7 @@ zr36060_wait_end (struct zr36060 *ptr)
 /* =========================================================================
    Local helper function:
 
-   basic test of "connectivity", writes/reads to/from memory the SOF marker 
+   basic test of "connectivity", writes/reads to/from memory the SOF marker
    ========================================================================= */
 
 static int
@@ -208,9 +208,9 @@ zr36060_basic_test (struct zr36060 *ptr)
 
 static int
 zr36060_pushit (struct zr36060 *ptr,
-	        u16             startreg,
-	        u16             len,
-	        const char     *data)
+		u16             startreg,
+		u16             len,
+		const char     *data)
 {
 	int i = 0;
 
@@ -335,7 +335,7 @@ static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 };
 /* ------------------------------------------------------------------------- */
 
 /* SOF (start of frame) segment depends on width, height and sampling ratio
-                         of each color component */
+			 of each color component */
 
 static int
 zr36060_set_sof (struct zr36060 *ptr)
@@ -367,8 +367,8 @@ zr36060_set_sof (struct zr36060 *ptr)
 
 /* ------------------------------------------------------------------------- */
 
-/* SOS (start of scan) segment depends on the used scan components 
-                        of each color component */
+/* SOS (start of scan) segment depends on the used scan components
+			of each color component */
 
 static int
 zr36060_set_sos (struct zr36060 *ptr)
@@ -385,7 +385,7 @@ zr36060_set_sos (struct zr36060 *ptr)
 	for (i = 0; i < NO_OF_COMPONENTS; i++) {
 		sos_data[5 + (i * 2)] = i;	// index
 		sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) |
-				        zr36060_ta[i]; // AC/DC tbl.sel.
+					zr36060_ta[i]; // AC/DC tbl.sel.
 	}
 	sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00;	// scan start
 	sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f;
@@ -999,7 +999,7 @@ zr36060_cleanup_module (void)
 		dprintk(1,
 			"zr36060: something's wrong - %d codecs left somehow.\n",
 			zr36060_codecs);
-	} 
+	}
 
 	/* however, we can't just stay alive */
 	videocodec_unregister(&zr36060_codec);
diff --git a/drivers/media/video/zr36120.c b/drivers/media/video/zr36120.c
index 417a999afee3..6ac3b6740089 100644
--- a/drivers/media/video/zr36120.c
+++ b/drivers/media/video/zr36120.c
@@ -316,7 +316,7 @@ DEBUG(printk(CARD_DEBUG "%p added to queue\n",CARD,item));
 				item->status = FBUFFER_BUSY;
 				if (!lastitem)
 					ztv->workqueue = item;
-				else 
+				else
 					lastitem->next = item;
 				lastitem = item;
 			}
@@ -516,7 +516,7 @@ DEBUG(printk(KERN_DEBUG "       %d: clip(%d,%d,%d,%d)\n", i,vp->x,vp->y,vp->widt
 	zraor((ztv->vidInterlace*ystep)<<0,~ZORAN_OCR_MASKSTRIDE,ZORAN_OCR);
 }
 
-struct tvnorm 
+struct tvnorm
 {
 	u16 Wt, Wa, Ht, Ha, HStart, VStart;
 };
@@ -660,7 +660,7 @@ DEBUG(printk(KERN_DEBUG "       Y: scale=0, start=%d, end=%d\n", Hstart, Hend));
 		int HorDcm = 64-X;
 		int hcrop1 = 2*(Wa-We)/4;
 		/*
-		 * BUGFIX: Juha Nurmela <junki@qn-lpr2-165.quicknet.inet.fi> 
+		 * BUGFIX: Juha Nurmela <junki@qn-lpr2-165.quicknet.inet.fi>
 		 * found the solution to the color phase shift.
 		 * See ChangeLog for the full explanation)
 		 */
@@ -812,12 +812,12 @@ void zoran_close(struct video_device* dev)
 
 	zoran_common_close(ztv);
 
-        /*
-         *      This is sucky but right now I can't find a good way to
-         *      be sure its safe to free the buffer. We wait 5-6 fields
-         *      which is more than sufficient to be sure.
-         */
-        msleep(100);			/* Wait 1/10th of a second */
+	/*
+	 *      This is sucky but right now I can't find a good way to
+	 *      be sure its safe to free the buffer. We wait 5-6 fields
+	 *      which is more than sufficient to be sure.
+	 */
+	msleep(100);			/* Wait 1/10th of a second */
 
 	/* free the allocated framebuffer */
 	bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE);
@@ -1436,7 +1436,7 @@ int zoran_ioctl(struct video_device* dev, unsigned int cmd, void *arg)
 
 	 /* Why isn't this in the API?
 	  * And why doesn't it take a buffer number?
-	 case BTTV_FIELDNR: 
+	 case BTTV_FIELDNR:
 	 {
 		unsigned long v = ztv->lastfieldnr;
 		if (copy_to_user(arg,&v,sizeof(v)))
@@ -1557,12 +1557,12 @@ void vbi_close(struct video_device *dev)
 
 	zoran_common_close(ztv);
 
-        /*
-         *      This is sucky but right now I can't find a good way to
-         *      be sure its safe to free the buffer. We wait 5-6 fields
-         *      which is more than sufficient to be sure.
-         */
-        msleep(100);			/* Wait 1/10th of a second */
+	/*
+	 *      This is sucky but right now I can't find a good way to
+	 *      be sure its safe to free the buffer. We wait 5-6 fields
+	 *      which is more than sufficient to be sure.
+	 */
+	msleep(100);			/* Wait 1/10th of a second */
 
 	for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
 	{
@@ -1620,7 +1620,7 @@ long vbi_read(struct video_device* dev, char* buf, unsigned long count, int nonb
 			write_unlock_irq(&ztv->lock);
 			return -EWOULDBLOCK;
 		}
-		
+
 		/* mark the unused buffer as wanted */
 		unused->status = FBUFFER_BUSY;
 		unused->next = 0;
@@ -1671,7 +1671,7 @@ long vbi_read(struct video_device* dev, char* buf, unsigned long count, int nonb
 	if (count == 2*19*2048) {
 		/*
 		 * Extreme HACK, old VBI programs expect 2048 points
-		 * of data, and we only got 864 orso. Double each 
+		 * of data, and we only got 864 orso. Double each
 		 * datapoint and clear the rest of the line.
 		 * This way we have appear to have a
 		 * sample_frequency of 29.5 Mc.
@@ -1956,7 +1956,7 @@ int __init init_zoran(int card)
 		zrand(~ZORAN_VDC_TRICOM, ZORAN_VDC);
 
 	/* external FL determines TOP frame */
-	zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC); 
+	zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC);
 
 	/* set HSpol */
 	if (ztv->card->hsync_pos)
@@ -2012,7 +2012,7 @@ void release_zoran(int max)
 	struct zoran *ztv;
 	int i;
 
-	for (i=0;i<max; i++) 
+	for (i=0;i<max; i++)
 	{
 		ztv = &zorans[i];
 
@@ -2029,7 +2029,7 @@ void release_zoran(int max)
 
 		/* free it */
 		free_irq(ztv->dev->irq,ztv);
- 
+
     		/* unregister i2c_bus */
 		i2c_unregister_bus((&ztv->i2c));
 
@@ -2050,7 +2050,7 @@ void __exit zr36120_exit(void)
 int __init zr36120_init(void)
 {
 	int	card;
- 
+
 	handle_chipset();
 	zoran_cards = find_zoran();
 	if (zoran_cards<0)
@@ -2063,7 +2063,7 @@ int __init zr36120_init(void)
 			/* only release the zorans we have registered */
 			release_zoran(card);
 			return -EIO;
-		} 
+		}
 	}
 	return 0;
 }
diff --git a/drivers/media/video/zr36120.h b/drivers/media/video/zr36120.h
index 571f8e84b58a..a71e485b0f98 100644
--- a/drivers/media/video/zr36120.h
+++ b/drivers/media/video/zr36120.h
@@ -1,4 +1,4 @@
-/* 
+/*
     zr36120.h - Zoran 36120/36125 based framegrabbers
 
     Copyright (C) 1998-1999 Pauline Middelink (middelin@polyware.nl)
@@ -89,7 +89,7 @@ struct vidinfo {
 	ulong*	overlay;	/* kernel addr of overlay mask		*/
 };
 
-struct zoran 
+struct zoran
 {
 	struct video_device video_dev;
 #define CARD_DEBUG	KERN_DEBUG "%s(%lu): "
@@ -106,7 +106,7 @@ struct zoran
 	uint		norm;		/* 0=PAL, 1=NTSC, 2=SECAM	*/
 	uint		tuner_freq;	/* Current freq in kHz		*/
 	struct video_picture picture;	/* Current picture params	*/
-  
+
 	/* videocard details */
 	uint		swidth;		/* screen width			*/
 	uint		sheight;	/* screen height		*/
author	Linus Torvalds <torvalds@g5.osdl.org>	2006-03-25 08:37:36 -0800
committer	Linus Torvalds <torvalds@g5.osdl.org>	2006-03-25 08:37:36 -0800
commit	368d17e068f691dba5a4f122c271db5ec9b2ebd6 (patch)
tree	69954cea09e5efd4ad1b8268be0e1733a13b4fae /drivers/media
parent	a9312fb839e90668d05a90024f3a7e7ff646a4a3 (diff)
parent	22fe087f0139e2f5cbe004f24f84cb1c08b4711e (diff)
download	linux-next-368d17e068f691dba5a4f122c271db5ec9b2ebd6.tar.gz