Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking update from David Miller:

 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
    timestamp offset.  From Andrey Vagin.

 2) VMWARE VM VSOCK layer, from Andy King.

 3) Much improved support for virtual functions and SR-IOV in bnx2x,
    from Ariel ELior.

 4) All protocols on ipv4 and ipv6 are now network namespace aware, and
    all the compatability checks for initial-namespace-only protocols is
    removed.  Thanks to Tom Parkin for helping deal with the last major
    holdout, L2TP.

 5) IPV6 support in netpoll and network namespace support in pktgen,
    from Cong Wang.

 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
    Protocol (MVRP) support, from David Ward.

 7) Compute packet lengths more accurately in the packet scheduler, from
    Eric Dumazet.

 8) Use per-task page fragment allocator in skb_append_datato_frags(),
    also from Eric Dumazet.

 9) Add support for connection tracking labels in netfilter, from
    Florian Westphal.

10) Fix default multicast group joining on ipv6, and add anti-spoofing
    checks to 6to4 and 6rd.  From Hannes Frederic Sowa.

11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
    times, rearrange inet frag datastructures for better cacheline
    locality, and move more operations outside of locking.  From Jesper
    Dangaard Brouer.

12) Instead of strict master <--> slave relationships, allow arbitrary
    scenerios with "upper device lists".  From Jiri Pirko.

13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
    Pirko.

14) Add a BPF filter netfilter match target, from Willem de Bruijn.

15) Orphan and delete a bunch of pre-historic networking drivers from
    Paul Gortmaker.

16) Add TSO support for GRE tunnels, from Pravin B SHelar.  Although
    this still needs some minor bug fixing before it's %100 correct in
    all cases.

17) Handle unresolved IPSEC states like ARP, with a resolution packet
    queue.  From Steffen Klassert.

18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
    Hemminger.  This was long overdue.

19) Support SO_REUSEPORT, from Tom Herbert.

20) Allow locking a socket BPF filter, so that it cannot change after a
    process drops capabilities.

21) Add VLAN filtering to bridge, from Vlad Yasevich.

22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
    the ipv6 routes, from YOSHIFUJI Hideaki.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
  ipv6: fix race condition regarding dst->expires and dst->from.
  net: fix a wrong assignment in skb_split()
  ip_gre: remove an extra dst_release()
  ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
  atl1c: restore buffer state
  net: fix a build failure when !CONFIG_PROC_FS
  net: ipv4: fix waring -Wunused-variable
  net: proc: fix build failed when procfs is not configured
  Revert "xen: netback: remove redundant xenvif_put"
  net: move procfs code to net/core/net-procfs.c
  qmi_wwan, cdc-ether: add ADU960S
  bonding: set sysfs device_type to 'bond'
  bonding: fix bond_release_all inconsistencies
  b44: use netdev_alloc_skb_ip_align()
  xen: netback: remove redundant xenvif_put
  net: fec: Do a sanity check on the gpio number
  ip_gre: propogate target device GSO capability to the tunnel device
  ip_gre: allow CSUM capable devices to handle packets
  bonding: Fix initialize after use for 3ad machine state spinlock
  bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
  ...

1 files changed, 0 insertions, 168 deletions

diff --git a/drivers/net/ethernet/dlink/de600.h b/drivers/net/ethernet/dlink/de600.h
deleted file mode 100644
index e80ecbabcf4e..000000000000
--- a/drivers/net/ethernet/dlink/de600.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/**************************************************
- *                                                *
- * Definition of D-Link Ethernet Pocket adapter   *
- *                                                *
- **************************************************/
-/*
- * D-Link Ethernet pocket adapter ports
- */
-/*
- * OK, so I'm cheating, but there are an awful lot of
- * reads and writes in order to get anything in and out
- * of the DE-600 with 4 bits at a time in the parallel port,
- * so every saved instruction really helps :-)
- */
-
-#ifndef DE600_IO
-#define DE600_IO	0x378
-#endif
-
-#define DATA_PORT	(DE600_IO)
-#define STATUS_PORT	(DE600_IO + 1)
-#define COMMAND_PORT	(DE600_IO + 2)
-
-#ifndef DE600_IRQ
-#define DE600_IRQ	7
-#endif
-/*
- * It really should look like this, and autoprobing as well...
- *
-#define DATA_PORT	(dev->base_addr + 0)
-#define STATUS_PORT	(dev->base_addr + 1)
-#define COMMAND_PORT	(dev->base_addr + 2)
-#define DE600_IRQ	dev->irq
- */
-
-/*
- * D-Link COMMAND_PORT commands
- */
-#define SELECT_NIC	0x04 /* select Network Interface Card */
-#define SELECT_PRN	0x1c /* select Printer */
-#define NML_PRN		0xec /* normal Printer situation */
-#define IRQEN		0x10 /* enable IRQ line */
-
-/*
- * D-Link STATUS_PORT
- */
-#define RX_BUSY		0x80
-#define RX_GOOD		0x40
-#define TX_FAILED16	0x10
-#define TX_BUSY		0x08
-
-/*
- * D-Link DATA_PORT commands
- * command in low 4 bits
- * data in high 4 bits
- * select current data nibble with HI_NIBBLE bit
- */
-#define WRITE_DATA	0x00 /* write memory */
-#define READ_DATA	0x01 /* read memory */
-#define STATUS		0x02 /* read  status register */
-#define COMMAND		0x03 /* write command register (see COMMAND below) */
-#define NULL_COMMAND	0x04 /* null command */
-#define RX_LEN		0x05 /* read  received packet length */
-#define TX_ADDR		0x06 /* set adapter transmit memory address */
-#define RW_ADDR		0x07 /* set adapter read/write memory address */
-#define HI_NIBBLE	0x08 /* read/write the high nibble of data,
-				or-ed with rest of command */
-
-/*
- * command register, accessed through DATA_PORT with low bits = COMMAND
- */
-#define RX_ALL		0x01 /* PROMISCUOUS */
-#define RX_BP		0x02 /* default: BROADCAST & PHYSICAL ADDRESS */
-#define RX_MBP		0x03 /* MULTICAST, BROADCAST & PHYSICAL ADDRESS */
-
-#define TX_ENABLE	0x04 /* bit 2 */
-#define RX_ENABLE	0x08 /* bit 3 */
-
-#define RESET		0x80 /* set bit 7 high */
-#define STOP_RESET	0x00 /* set bit 7 low */
-
-/*
- * data to command register
- * (high 4 bits in write to DATA_PORT)
- */
-#define RX_PAGE2_SELECT	0x10 /* bit 4, only 2 pages to select */
-#define RX_BASE_PAGE	0x20 /* bit 5, always set when specifying RX_ADDR */
-#define FLIP_IRQ	0x40 /* bit 6 */
-
-/*
- * D-Link adapter internal memory:
- *
- * 0-2K 1:st transmit page (send from pointer up to 2K)
- * 2-4K	2:nd transmit page (send from pointer up to 4K)
- *
- * 4-6K 1:st receive page (data from 4K upwards)
- * 6-8K 2:nd receive page (data from 6K upwards)
- *
- * 8K+	Adapter ROM (contains magic code and last 3 bytes of Ethernet address)
- */
-#define MEM_2K		0x0800 /* 2048 */
-#define MEM_4K		0x1000 /* 4096 */
-#define MEM_6K		0x1800 /* 6144 */
-#define NODE_ADDRESS	0x2000 /* 8192 */
-
-#define RUNT 60		/* Too small Ethernet packet */
-
-/**************************************************
- *                                                *
- *             End of definition                  *
- *                                                *
- **************************************************/
-
-/*
- * Index to functions, as function prototypes.
- */
-/* Routines used internally. (See "convenience macros") */
-static u8	de600_read_status(struct net_device *dev);
-static u8	de600_read_byte(unsigned char type, struct net_device *dev);
-
-/* Put in the device structure. */
-static int	de600_open(struct net_device *dev);
-static int	de600_close(struct net_device *dev);
-static int	de600_start_xmit(struct sk_buff *skb, struct net_device *dev);
-
-/* Dispatch from interrupts. */
-static irqreturn_t de600_interrupt(int irq, void *dev_id);
-static int	de600_tx_intr(struct net_device *dev, int irq_status);
-static void	de600_rx_intr(struct net_device *dev);
-
-/* Initialization */
-static void	trigger_interrupt(struct net_device *dev);
-static int	adapter_init(struct net_device *dev);
-
-/*
- * Convenience macros/functions for D-Link adapter
- */
-
-#define select_prn() outb_p(SELECT_PRN, COMMAND_PORT); DE600_SLOW_DOWN
-#define select_nic() outb_p(SELECT_NIC, COMMAND_PORT); DE600_SLOW_DOWN
-
-/* Thanks for hints from Mark Burton <markb@ordern.demon.co.uk> */
-#define de600_put_byte(data) ( \
-	outb_p(((data) << 4)   | WRITE_DATA            , DATA_PORT), \
-	outb_p(((data) & 0xf0) | WRITE_DATA | HI_NIBBLE, DATA_PORT))
-
-/*
- * The first two outb_p()'s below could perhaps be deleted if there
- * would be more delay in the last two. Not certain about it yet...
- */
-#define de600_put_command(cmd) ( \
-	outb_p(( rx_page        << 4)   | COMMAND            , DATA_PORT), \
-	outb_p(( rx_page        & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT), \
-	outb_p(((rx_page | cmd) << 4)   | COMMAND            , DATA_PORT), \
-	outb_p(((rx_page | cmd) & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT))
-
-#define de600_setup_address(addr,type) ( \
-	outb_p((((addr) << 4) & 0xf0) | type            , DATA_PORT), \
-	outb_p(( (addr)       & 0xf0) | type | HI_NIBBLE, DATA_PORT), \
-	outb_p((((addr) >> 4) & 0xf0) | type            , DATA_PORT), \
-	outb_p((((addr) >> 8) & 0xf0) | type | HI_NIBBLE, DATA_PORT))
-
-#define rx_page_adr() ((rx_page & RX_PAGE2_SELECT)?(MEM_6K):(MEM_4K))
-
-/* Flip bit, only 2 pages */
-#define next_rx_page() (rx_page ^= RX_PAGE2_SELECT)
-
-#define tx_page_adr(a) (((a) + 1) * MEM_2K)