diff options
author | Zheng Yongjun <zhengyongjun3@huawei.com> | 2021-06-01 22:18:59 +0800 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2021-06-01 17:05:05 -0700 |
commit | e65c27938d8e3dd67d55049a82f27e56ca31e728 (patch) | |
tree | 3b38f47615ca72168f97ab0bab55b27f71d2e761 /drivers/net/mdio | |
parent | f62c4f3870d8114029d3ebfc7ec4421728f07f83 (diff) | |
download | linux-next-e65c27938d8e3dd67d55049a82f27e56ca31e728.tar.gz |
net: mdio: Fix spelling mistakes
informations ==> information
typicaly ==> typically
derrive ==> derive
eventhough ==> even though
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/mdio')
-rw-r--r-- | drivers/net/mdio/mdio-bcm-unimac.c | 2 | ||||
-rw-r--r-- | drivers/net/mdio/mdio-mux-bcm-iproc.c | 2 | ||||
-rw-r--r-- | drivers/net/mdio/mdio-mux-meson-g12a.c | 2 | ||||
-rw-r--r-- | drivers/net/mdio/of_mdio.c | 2 |
4 files changed, 4 insertions, 4 deletions
diff --git a/drivers/net/mdio/mdio-bcm-unimac.c b/drivers/net/mdio/mdio-bcm-unimac.c index 5d171e7f118d..bfc9be23c973 100644 --- a/drivers/net/mdio/mdio-bcm-unimac.c +++ b/drivers/net/mdio/mdio-bcm-unimac.c @@ -203,7 +203,7 @@ static void unimac_mdio_clk_set(struct unimac_mdio_priv *priv) return; } - /* The MDIO clock is the reference clock (typicaly 250Mhz) divided by + /* The MDIO clock is the reference clock (typically 250Mhz) divided by * 2 x (MDIO_CLK_DIV + 1) */ reg = unimac_mdio_readl(priv, MDIO_CFG); diff --git a/drivers/net/mdio/mdio-mux-bcm-iproc.c b/drivers/net/mdio/mdio-mux-bcm-iproc.c index 03261e6b9ceb..239e88c7a272 100644 --- a/drivers/net/mdio/mdio-mux-bcm-iproc.c +++ b/drivers/net/mdio/mdio-mux-bcm-iproc.c @@ -65,7 +65,7 @@ static void mdio_mux_iproc_config(struct iproc_mdiomux_desc *md) writel(val, md->base + MDIO_SCAN_CTRL_OFFSET); if (md->core_clk) { - /* use rate adjust regs to derrive the mdio's operating + /* use rate adjust regs to derive the mdio's operating * frequency from the specified core clock */ divisor = clk_get_rate(md->core_clk) / MDIO_OPERATING_FREQUENCY; diff --git a/drivers/net/mdio/mdio-mux-meson-g12a.c b/drivers/net/mdio/mdio-mux-meson-g12a.c index bf86c9c7a288..b8866bc3f2e8 100644 --- a/drivers/net/mdio/mdio-mux-meson-g12a.c +++ b/drivers/net/mdio/mdio-mux-meson-g12a.c @@ -95,7 +95,7 @@ static int g12a_ephy_pll_enable(struct clk_hw *hw) /* Poll on the digital lock instead of the usual analog lock * This is done because bit 31 is unreliable on some SoC. Bit - * 31 may indicate that the PLL is not lock eventhough the clock + * 31 may indicate that the PLL is not lock even though the clock * is actually running */ return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val, diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c index 094494a68ddf..8e97d5b825f5 100644 --- a/drivers/net/mdio/of_mdio.c +++ b/drivers/net/mdio/of_mdio.c @@ -466,7 +466,7 @@ EXPORT_SYMBOL(of_phy_get_and_connect); * of_phy_is_fixed_link() and of_phy_register_fixed_link() must * support two DT bindings: * - the old DT binding, where 'fixed-link' was a property with 5 - * cells encoding various informations about the fixed PHY + * cells encoding various information about the fixed PHY * - the new DT binding, where 'fixed-link' is a sub-node of the * Ethernet device. */ |