Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 755 insertions, 0 deletions

diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
new file mode 100644
index 000000000000..e68cf5fb4920
--- /dev/null
+++ b/drivers/net/shaper.c
@@ -0,0 +1,755 @@
+/*
+ *			Simple traffic shaper for Linux NET3.
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ *				http://www.redhat.com
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *	
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide 
+ *	warranty for any of this software. This material is provided 
+ *	"AS-IS" and at no charge.	
+ *
+ *	
+ *	Algorithm:
+ *
+ *	Queue Frame:
+ *		Compute time length of frame at regulated speed
+ *		Add frame to queue at appropriate point
+ *		Adjust time length computation for followup frames
+ *		Any frame that falls outside of its boundaries is freed
+ *
+ *	We work to the following constants
+ *
+ *		SHAPER_QLEN	Maximum queued frames
+ *		SHAPER_LATENCY	Bounding latency on a frame. Leaving this latency
+ *				window drops the frame. This stops us queueing 
+ *				frames for a long time and confusing a remote
+ *				host.
+ *		SHAPER_MAXSLIP	Maximum time a priority frame may jump forward.
+ *				That bounds the penalty we will inflict on low
+ *				priority traffic.
+ *		SHAPER_BURST	Time range we call "now" in order to reduce
+ *				system load. The more we make this the burstier
+ *				the behaviour, the better local performance you
+ *				get through packet clustering on routers and the
+ *				worse the remote end gets to judge rtts.
+ *
+ *	This is designed to handle lower speed links ( < 200K/second or so). We
+ *	run off a 100-150Hz base clock typically. This gives us a resolution at
+ *	200Kbit/second of about 2Kbit or 256 bytes. Above that our timer
+ *	resolution may start to cause much more burstiness in the traffic. We
+ *	could avoid a lot of that by calling kick_shaper() at the end of the 
+ *	tied device transmissions. If you run above about 100K second you 
+ *	may need to tune the supposed speed rate for the right values.
+ *
+ *	BUGS:
+ *		Downing the interface under the shaper before the shaper
+ *		will render your machine defunct. Don't for now shape over
+ *		PPP or SLIP therefore!
+ *		This will be fixed in BETA4
+ *
+ * Update History :
+ *
+ *              bh_atomic() SMP races fixes and rewritten the locking code to
+ *              be SMP safe and irq-mask friendly.
+ *              NOTE: we can't use start_bh_atomic() in kick_shaper()
+ *              because it's going to be recalled from an irq handler,
+ *              and synchronize_bh() is a nono if called from irq context.
+ *						1999  Andrea Arcangeli
+ *
+ *              Device statistics (tx_pakets, tx_bytes,
+ *              tx_drops: queue_over_time and collisions: max_queue_exceded)
+ *                               1999/06/18 Jordi Murgo <savage@apostols.org>
+ *
+ *		Use skb->cb for private data.
+ *				 2000/03 Andi Kleen
+ */
+ 
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/init.h>
+#include <linux/if_shaper.h>
+
+#include <net/dst.h>
+#include <net/arp.h>
+
+struct shaper_cb { 
+	unsigned long	shapeclock;		/* Time it should go out */
+	unsigned long	shapestamp;		/* Stamp for shaper    */
+	__u32		shapelatency;		/* Latency on frame */
+	__u32		shapelen;		/* Frame length in clocks */
+	__u16		shapepend;		/* Pending */
+}; 
+#define SHAPERCB(skb) ((struct shaper_cb *) ((skb)->cb))
+
+static int sh_debug;		/* Debug flag */
+
+#define SHAPER_BANNER	"CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n"
+
+/*
+ *	Locking
+ */
+ 
+static int shaper_lock(struct shaper *sh)
+{
+	/*
+	 *	Lock in an interrupt must fail
+	 */
+	while (test_and_set_bit(0, &sh->locked))
+	{
+		if (!in_interrupt())
+			sleep_on(&sh->wait_queue);
+		else
+			return 0;
+			
+	}
+	return 1;
+}
+
+static void shaper_kick(struct shaper *sh);
+
+static void shaper_unlock(struct shaper *sh)
+{
+	clear_bit(0, &sh->locked);
+	wake_up(&sh->wait_queue);
+	shaper_kick(sh);
+}
+
+/*
+ *	Compute clocks on a buffer
+ */
+  
+static int shaper_clocks(struct shaper *shaper, struct sk_buff *skb)
+{
+ 	int t=skb->len/shaper->bytespertick;
+ 	return t;
+}
+
+/*
+ *	Set the speed of a shaper. We compute this in bytes per tick since
+ *	thats how the machine wants to run. Quoted input is in bits per second
+ *	as is traditional (note not BAUD). We assume 8 bit bytes. 
+ */
+  
+static void shaper_setspeed(struct shaper *shaper, int bitspersec)
+{
+	shaper->bitspersec=bitspersec;
+	shaper->bytespertick=(bitspersec/HZ)/8;
+	if(!shaper->bytespertick)
+		shaper->bytespertick++;
+}
+
+/*
+ *	Throw a frame at a shaper.
+ */
+  
+static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb)
+{
+ 	struct sk_buff *ptr;
+   
+ 	/*
+ 	 *	Get ready to work on this shaper. Lock may fail if its
+ 	 *	an interrupt and locked.
+ 	 */
+ 	 
+ 	if(!shaper_lock(shaper))
+ 		return -1;
+ 	ptr=shaper->sendq.prev;
+ 	
+ 	/*
+ 	 *	Set up our packet details
+ 	 */
+ 	 
+ 	SHAPERCB(skb)->shapelatency=0;
+ 	SHAPERCB(skb)->shapeclock=shaper->recovery;
+ 	if(time_before(SHAPERCB(skb)->shapeclock, jiffies))
+ 		SHAPERCB(skb)->shapeclock=jiffies;
+ 	skb->priority=0;	/* short term bug fix */
+ 	SHAPERCB(skb)->shapestamp=jiffies;
+ 	
+ 	/*
+ 	 *	Time slots for this packet.
+ 	 */
+ 	 
+ 	SHAPERCB(skb)->shapelen= shaper_clocks(shaper,skb);
+ 	
+#ifdef SHAPER_COMPLEX /* and broken.. */
+
+ 	while(ptr && ptr!=(struct sk_buff *)&shaper->sendq)
+ 	{
+ 		if(ptr->pri<skb->pri 
+ 			&& jiffies - SHAPERCB(ptr)->shapeclock < SHAPER_MAXSLIP)
+ 		{
+ 			struct sk_buff *tmp=ptr->prev;
+
+ 			/*
+ 			 *	It goes before us therefore we slip the length
+ 			 *	of the new frame.
+ 			 */
+
+ 			SHAPERCB(ptr)->shapeclock+=SHAPERCB(skb)->shapelen;
+ 			SHAPERCB(ptr)->shapelatency+=SHAPERCB(skb)->shapelen;
+
+ 			/*
+ 			 *	The packet may have slipped so far back it
+ 			 *	fell off.
+ 			 */
+ 			if(SHAPERCB(ptr)->shapelatency > SHAPER_LATENCY)
+ 			{
+ 				skb_unlink(ptr);
+ 				dev_kfree_skb(ptr);
+ 			}
+ 			ptr=tmp;
+ 		}
+ 		else
+ 			break;
+ 	}
+ 	if(ptr==NULL || ptr==(struct sk_buff *)&shaper->sendq)
+ 		skb_queue_head(&shaper->sendq,skb);
+ 	else
+ 	{
+ 		struct sk_buff *tmp;
+ 		/*
+ 		 *	Set the packet clock out time according to the
+ 		 *	frames ahead. Im sure a bit of thought could drop
+ 		 *	this loop.
+ 		 */
+ 		for(tmp=skb_peek(&shaper->sendq); tmp!=NULL && tmp!=ptr; tmp=tmp->next)
+ 			SHAPERCB(skb)->shapeclock+=tmp->shapelen;
+ 		skb_append(ptr,skb);
+ 	}
+#else
+	{
+		struct sk_buff *tmp;
+		/*
+		 *	Up our shape clock by the time pending on the queue
+		 *	(Should keep this in the shaper as a variable..)
+		 */
+		for(tmp=skb_peek(&shaper->sendq); tmp!=NULL && 
+			tmp!=(struct sk_buff *)&shaper->sendq; tmp=tmp->next)
+			SHAPERCB(skb)->shapeclock+=SHAPERCB(tmp)->shapelen;
+		/*
+		 *	Queue over time. Spill packet.
+		 */
+		if(SHAPERCB(skb)->shapeclock-jiffies > SHAPER_LATENCY) {
+			dev_kfree_skb(skb);
+			shaper->stats.tx_dropped++;
+		} else
+			skb_queue_tail(&shaper->sendq, skb);
+	}
+#endif 	
+	if(sh_debug)
+ 		printk("Frame queued.\n");
+ 	if(skb_queue_len(&shaper->sendq)>SHAPER_QLEN)
+ 	{
+ 		ptr=skb_dequeue(&shaper->sendq);
+                dev_kfree_skb(ptr);
+                shaper->stats.collisions++;
+ 	}
+ 	shaper_unlock(shaper);
+ 	return 0;
+}
+
+/*
+ *	Transmit from a shaper
+ */
+ 
+static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb)
+{
+	struct sk_buff *newskb=skb_clone(skb, GFP_ATOMIC);
+	if(sh_debug)
+		printk("Kick frame on %p\n",newskb);
+	if(newskb)
+	{
+		newskb->dev=shaper->dev;
+		newskb->priority=2;
+		if(sh_debug)
+			printk("Kick new frame to %s, %d\n",
+				shaper->dev->name,newskb->priority);
+		dev_queue_xmit(newskb);
+
+                shaper->stats.tx_bytes += skb->len;
+		shaper->stats.tx_packets++;
+
+                if(sh_debug)
+			printk("Kicked new frame out.\n");
+		dev_kfree_skb(skb);
+	}
+}
+
+/*
+ *	Timer handler for shaping clock
+ */
+ 
+static void shaper_timer(unsigned long data)
+{
+	struct shaper *sh=(struct shaper *)data;
+	shaper_kick(sh);
+}
+
+/*
+ *	Kick a shaper queue and try and do something sensible with the 
+ *	queue. 
+ */
+
+static void shaper_kick(struct shaper *shaper)
+{
+	struct sk_buff *skb;
+	
+	/*
+	 *	Shaper unlock will kick
+	 */
+	 
+	if (test_and_set_bit(0, &shaper->locked))
+	{
+		if(sh_debug)
+			printk("Shaper locked.\n");
+		mod_timer(&shaper->timer, jiffies);
+		return;
+	}
+
+		
+	/*
+	 *	Walk the list (may be empty)
+	 */
+	 
+	while((skb=skb_peek(&shaper->sendq))!=NULL)
+	{
+		/*
+		 *	Each packet due to go out by now (within an error
+		 *	of SHAPER_BURST) gets kicked onto the link 
+		 */
+		 
+		if(sh_debug)
+			printk("Clock = %ld, jiffies = %ld\n", SHAPERCB(skb)->shapeclock, jiffies);
+		if(time_before_eq(SHAPERCB(skb)->shapeclock, jiffies + SHAPER_BURST))
+		{
+			/*
+			 *	Pull the frame and get interrupts back on.
+			 */
+			 
+			skb_unlink(skb);
+			if (shaper->recovery < 
+			    SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen)
+				shaper->recovery = SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen;
+			/*
+			 *	Pass on to the physical target device via
+			 *	our low level packet thrower.
+			 */
+			
+			SHAPERCB(skb)->shapepend=0;
+			shaper_queue_xmit(shaper, skb);	/* Fire */
+		}
+		else
+			break;
+	}
+
+	/*
+	 *	Next kick.
+	 */
+	 
+	if(skb!=NULL)
+		mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock);
+
+	clear_bit(0, &shaper->locked);
+}
+
+
+/*
+ *	Flush the shaper queues on a closedown
+ */
+ 
+static void shaper_flush(struct shaper *shaper)
+{
+	struct sk_buff *skb;
+ 	if(!shaper_lock(shaper))
+	{
+		printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n");
+ 		return;
+	}
+	while((skb=skb_dequeue(&shaper->sendq))!=NULL)
+		dev_kfree_skb(skb);
+	shaper_unlock(shaper);
+}
+
+/*
+ *	Bring the interface up. We just disallow this until a 
+ *	bind.
+ */
+
+static int shaper_open(struct net_device *dev)
+{
+	struct shaper *shaper=dev->priv;
+	
+	/*
+	 *	Can't open until attached.
+	 *	Also can't open until speed is set, or we'll get
+	 *	a division by zero.
+	 */
+	 
+	if(shaper->dev==NULL)
+		return -ENODEV;
+	if(shaper->bitspersec==0)
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ *	Closing a shaper flushes the queues.
+ */
+ 
+static int shaper_close(struct net_device *dev)
+{
+	struct shaper *shaper=dev->priv;
+	shaper_flush(shaper);
+	del_timer_sync(&shaper->timer);
+	return 0;
+}
+
+/*
+ *	Revectored calls. We alter the parameters and call the functions
+ *	for our attached device. This enables us to bandwidth allocate after
+ *	ARP and other resolutions and not before.
+ */
+
+
+static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct shaper *sh=dev->priv;
+	return shaper_qframe(sh, skb);
+}
+
+static struct net_device_stats *shaper_get_stats(struct net_device *dev)
+{
+     	struct shaper *sh=dev->priv;
+	return &sh->stats;
+}
+
+static int shaper_header(struct sk_buff *skb, struct net_device *dev, 
+	unsigned short type, void *daddr, void *saddr, unsigned len)
+{
+	struct shaper *sh=dev->priv;
+	int v;
+	if(sh_debug)
+		printk("Shaper header\n");
+	skb->dev=sh->dev;
+	v=sh->hard_header(skb,sh->dev,type,daddr,saddr,len);
+	skb->dev=dev;
+	return v;
+}
+
+static int shaper_rebuild_header(struct sk_buff *skb)
+{
+	struct shaper *sh=skb->dev->priv;
+	struct net_device *dev=skb->dev;
+	int v;
+	if(sh_debug)
+		printk("Shaper rebuild header\n");
+	skb->dev=sh->dev;
+	v=sh->rebuild_header(skb);
+	skb->dev=dev;
+	return v;
+}
+
+#if 0
+static int shaper_cache(struct neighbour *neigh, struct hh_cache *hh)
+{
+	struct shaper *sh=neigh->dev->priv;
+	struct net_device *tmp;
+	int ret;
+	if(sh_debug)
+		printk("Shaper header cache bind\n");
+	tmp=neigh->dev;
+	neigh->dev=sh->dev;
+	ret=sh->hard_header_cache(neigh,hh);
+	neigh->dev=tmp;
+	return ret;
+}
+
+static void shaper_cache_update(struct hh_cache *hh, struct net_device *dev,
+	unsigned char *haddr)
+{
+	struct shaper *sh=dev->priv;
+	if(sh_debug)
+		printk("Shaper cache update\n");
+	sh->header_cache_update(hh, sh->dev, haddr);
+}
+#endif
+
+#ifdef CONFIG_INET
+
+static int shaper_neigh_setup(struct neighbour *n)
+{
+#ifdef CONFIG_INET
+	if (n->nud_state == NUD_NONE) {
+		n->ops = &arp_broken_ops;
+		n->output = n->ops->output;
+	}
+#endif	
+	return 0;
+}
+
+static int shaper_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
+{
+#ifdef CONFIG_INET
+	if (p->tbl->family == AF_INET) {
+		p->neigh_setup = shaper_neigh_setup;
+		p->ucast_probes = 0;
+		p->mcast_probes = 0;
+	}
+#endif	
+	return 0;
+}
+
+#else /* !(CONFIG_INET) */
+
+static int shaper_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
+{
+	return 0;
+}
+
+#endif
+
+static int shaper_attach(struct net_device *shdev, struct shaper *sh, struct net_device *dev)
+{
+	sh->dev = dev;
+	sh->hard_start_xmit=dev->hard_start_xmit;
+	sh->get_stats=dev->get_stats;
+	if(dev->hard_header)
+	{
+		sh->hard_header=dev->hard_header;
+		shdev->hard_header = shaper_header;
+	}
+	else
+		shdev->hard_header = NULL;
+		
+	if(dev->rebuild_header)
+	{
+		sh->rebuild_header	= dev->rebuild_header;
+		shdev->rebuild_header	= shaper_rebuild_header;
+	}
+	else
+		shdev->rebuild_header	= NULL;
+	
+#if 0
+	if(dev->hard_header_cache)
+	{
+		sh->hard_header_cache	= dev->hard_header_cache;
+		shdev->hard_header_cache= shaper_cache;
+	}
+	else
+	{
+		shdev->hard_header_cache= NULL;
+	}
+			
+	if(dev->header_cache_update)
+	{
+		sh->header_cache_update	= dev->header_cache_update;
+		shdev->header_cache_update = shaper_cache_update;
+	}
+	else
+		shdev->header_cache_update= NULL;
+#else
+	shdev->header_cache_update = NULL;
+	shdev->hard_header_cache = NULL;
+#endif
+	shdev->neigh_setup = shaper_neigh_setup_dev;
+	
+	shdev->hard_header_len=dev->hard_header_len;
+	shdev->type=dev->type;
+	shdev->addr_len=dev->addr_len;
+	shdev->mtu=dev->mtu;
+	sh->bitspersec=0;
+	return 0;
+}
+
+static int shaper_ioctl(struct net_device *dev,  struct ifreq *ifr, int cmd)
+{
+	struct shaperconf *ss= (struct shaperconf *)&ifr->ifr_ifru;
+	struct shaper *sh=dev->priv;
+	
+	if(ss->ss_cmd == SHAPER_SET_DEV || ss->ss_cmd == SHAPER_SET_SPEED)
+	{
+		if(!capable(CAP_NET_ADMIN))
+			return -EPERM;
+	}
+	
+	switch(ss->ss_cmd)
+	{
+		case SHAPER_SET_DEV:
+		{
+			struct net_device *them=__dev_get_by_name(ss->ss_name);
+			if(them==NULL)
+				return -ENODEV;
+			if(sh->dev)
+				return -EBUSY;
+			return shaper_attach(dev,dev->priv, them);
+		}
+		case SHAPER_GET_DEV:
+			if(sh->dev==NULL)
+				return -ENODEV;
+			strcpy(ss->ss_name, sh->dev->name);
+			return 0;
+		case SHAPER_SET_SPEED:
+			shaper_setspeed(sh,ss->ss_speed);
+			return 0;
+		case SHAPER_GET_SPEED:
+			ss->ss_speed=sh->bitspersec;
+			return 0;
+		default:
+			return -EINVAL;
+	}
+}
+
+static void shaper_init_priv(struct net_device *dev)
+{
+	struct shaper *sh = dev->priv;
+
+	skb_queue_head_init(&sh->sendq);
+	init_timer(&sh->timer);
+	sh->timer.function=shaper_timer;
+	sh->timer.data=(unsigned long)sh;
+	init_waitqueue_head(&sh->wait_queue);
+}
+
+/*
+ *	Add a shaper device to the system
+ */
+ 
+static void __init shaper_setup(struct net_device *dev)
+{
+	/*
+	 *	Set up the shaper.
+	 */
+
+	SET_MODULE_OWNER(dev);
+
+	shaper_init_priv(dev);
+
+	dev->open		= shaper_open;
+	dev->stop		= shaper_close;
+	dev->hard_start_xmit 	= shaper_start_xmit;
+	dev->get_stats 		= shaper_get_stats;
+	dev->set_multicast_list = NULL;
+	
+	/*
+	 *	Intialise the packet queues
+	 */
+	 
+	/*
+	 *	Handlers for when we attach to a device.
+	 */
+
+	dev->hard_header 	= shaper_header;
+	dev->rebuild_header 	= shaper_rebuild_header;
+#if 0
+	dev->hard_header_cache	= shaper_cache;
+	dev->header_cache_update= shaper_cache_update;
+#endif
+	dev->neigh_setup	= shaper_neigh_setup_dev;
+	dev->do_ioctl		= shaper_ioctl;
+	dev->hard_header_len	= 0;
+	dev->type		= ARPHRD_ETHER;	/* initially */
+	dev->set_mac_address	= NULL;
+	dev->mtu		= 1500;
+	dev->addr_len		= 0;
+	dev->tx_queue_len	= 10;
+	dev->flags		= 0;
+}
+ 
+static int shapers = 1;
+#ifdef MODULE
+
+module_param(shapers, int, 0);
+MODULE_PARM_DESC(shapers, "Traffic shaper: maximum number of shapers");
+
+#else /* MODULE */
+
+static int __init set_num_shapers(char *str)
+{
+	shapers = simple_strtol(str, NULL, 0);
+	return 1;
+}
+
+__setup("shapers=", set_num_shapers);
+
+#endif /* MODULE */
+
+static struct net_device **devs;
+
+static unsigned int shapers_registered = 0;
+
+static int __init shaper_init(void)
+{
+	int i;
+	size_t alloc_size;
+	struct net_device *dev;
+	char name[IFNAMSIZ];
+
+	if (shapers < 1)
+		return -ENODEV;
+
+	alloc_size = sizeof(*dev) * shapers;
+	devs = kmalloc(alloc_size, GFP_KERNEL);
+	if (!devs)
+		return -ENOMEM;
+	memset(devs, 0, alloc_size);
+
+	for (i = 0; i < shapers; i++) {
+
+		snprintf(name, IFNAMSIZ, "shaper%d", i);
+		dev = alloc_netdev(sizeof(struct shaper), name,
+				   shaper_setup);
+		if (!dev) 
+			break;
+
+		if (register_netdev(dev)) {
+			free_netdev(dev);
+			break;
+		}
+
+		devs[i] = dev;
+		shapers_registered++;
+	}
+
+	if (!shapers_registered) {
+		kfree(devs);
+		devs = NULL;
+	}
+
+	return (shapers_registered ? 0 : -ENODEV);
+}
+
+static void __exit shaper_exit (void)
+{
+	int i;
+
+	for (i = 0; i < shapers_registered; i++) {
+		if (devs[i]) {
+			unregister_netdev(devs[i]);
+			free_netdev(devs[i]);
+		}
+	}
+
+	kfree(devs);
+	devs = NULL;
+}
+
+module_init(shaper_init);
+module_exit(shaper_exit);
+MODULE_LICENSE("GPL");
+