asix: Rename asix.c to asix_devices.c

This patch further creates two additional copies of asix.c.
In another patch these copies will be used to factor out
common code.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1680 insertions, 0 deletions

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
new file mode 100644
index 000000000000..6564c32d3af0
--- /dev/null
+++ b/drivers/net/usb/asix.h
@@ -0,0 +1,1680 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/if_vlan.h>
+
+#define DRIVER_VERSION "22-Dec-2011"
+#define DRIVER_NAME "asix"
+
+/* ASIX AX8817X based USB 2.0 Ethernet Devices */
+
+#define AX_CMD_SET_SW_MII		0x06
+#define AX_CMD_READ_MII_REG		0x07
+#define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_SET_HW_MII		0x0a
+#define AX_CMD_READ_EEPROM		0x0b
+#define AX_CMD_WRITE_EEPROM		0x0c
+#define AX_CMD_WRITE_ENABLE		0x0d
+#define AX_CMD_WRITE_DISABLE		0x0e
+#define AX_CMD_READ_RX_CTL		0x0f
+#define AX_CMD_WRITE_RX_CTL		0x10
+#define AX_CMD_READ_IPG012		0x11
+#define AX_CMD_WRITE_IPG0		0x12
+#define AX_CMD_WRITE_IPG1		0x13
+#define AX_CMD_READ_NODE_ID		0x13
+#define AX_CMD_WRITE_NODE_ID		0x14
+#define AX_CMD_WRITE_IPG2		0x14
+#define AX_CMD_WRITE_MULTI_FILTER	0x16
+#define AX88172_CMD_READ_NODE_ID	0x17
+#define AX_CMD_READ_PHY_ID		0x19
+#define AX_CMD_READ_MEDIUM_STATUS	0x1a
+#define AX_CMD_WRITE_MEDIUM_MODE	0x1b
+#define AX_CMD_READ_MONITOR_MODE	0x1c
+#define AX_CMD_WRITE_MONITOR_MODE	0x1d
+#define AX_CMD_READ_GPIOS		0x1e
+#define AX_CMD_WRITE_GPIOS		0x1f
+#define AX_CMD_SW_RESET			0x20
+#define AX_CMD_SW_PHY_STATUS		0x21
+#define AX_CMD_SW_PHY_SELECT		0x22
+
+#define AX_MONITOR_MODE			0x01
+#define AX_MONITOR_LINK			0x02
+#define AX_MONITOR_MAGIC		0x04
+#define AX_MONITOR_HSFS			0x10
+
+/* AX88172 Medium Status Register values */
+#define AX88172_MEDIUM_FD		0x02
+#define AX88172_MEDIUM_TX		0x04
+#define AX88172_MEDIUM_FC		0x10
+#define AX88172_MEDIUM_DEFAULT \
+		( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
+
+#define AX_MCAST_FILTER_SIZE		8
+#define AX_MAX_MCAST			64
+
+#define AX_SWRESET_CLEAR		0x00
+#define AX_SWRESET_RR			0x01
+#define AX_SWRESET_RT			0x02
+#define AX_SWRESET_PRTE			0x04
+#define AX_SWRESET_PRL			0x08
+#define AX_SWRESET_BZ			0x10
+#define AX_SWRESET_IPRL			0x20
+#define AX_SWRESET_IPPD			0x40
+
+#define AX88772_IPG0_DEFAULT		0x15
+#define AX88772_IPG1_DEFAULT		0x0c
+#define AX88772_IPG2_DEFAULT		0x12
+
+/* AX88772 & AX88178 Medium Mode Register */
+#define AX_MEDIUM_PF		0x0080
+#define AX_MEDIUM_JFE		0x0040
+#define AX_MEDIUM_TFC		0x0020
+#define AX_MEDIUM_RFC		0x0010
+#define AX_MEDIUM_ENCK		0x0008
+#define AX_MEDIUM_AC		0x0004
+#define AX_MEDIUM_FD		0x0002
+#define AX_MEDIUM_GM		0x0001
+#define AX_MEDIUM_SM		0x1000
+#define AX_MEDIUM_SBP		0x0800
+#define AX_MEDIUM_PS		0x0200
+#define AX_MEDIUM_RE		0x0100
+
+#define AX88178_MEDIUM_DEFAULT	\
+	(AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
+	 AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
+	 AX_MEDIUM_RE)
+
+#define AX88772_MEDIUM_DEFAULT	\
+	(AX_MEDIUM_FD | AX_MEDIUM_RFC | \
+	 AX_MEDIUM_TFC | AX_MEDIUM_PS | \
+	 AX_MEDIUM_AC | AX_MEDIUM_RE)
+
+/* AX88772 & AX88178 RX_CTL values */
+#define AX_RX_CTL_SO		0x0080
+#define AX_RX_CTL_AP		0x0020
+#define AX_RX_CTL_AM		0x0010
+#define AX_RX_CTL_AB		0x0008
+#define AX_RX_CTL_SEP		0x0004
+#define AX_RX_CTL_AMALL		0x0002
+#define AX_RX_CTL_PRO		0x0001
+#define AX_RX_CTL_MFB_2048	0x0000
+#define AX_RX_CTL_MFB_4096	0x0100
+#define AX_RX_CTL_MFB_8192	0x0200
+#define AX_RX_CTL_MFB_16384	0x0300
+
+#define AX_DEFAULT_RX_CTL	(AX_RX_CTL_SO | AX_RX_CTL_AB)
+
+/* GPIO 0 .. 2 toggles */
+#define AX_GPIO_GPO0EN		0x01	/* GPIO0 Output enable */
+#define AX_GPIO_GPO_0		0x02	/* GPIO0 Output value */
+#define AX_GPIO_GPO1EN		0x04	/* GPIO1 Output enable */
+#define AX_GPIO_GPO_1		0x08	/* GPIO1 Output value */
+#define AX_GPIO_GPO2EN		0x10	/* GPIO2 Output enable */
+#define AX_GPIO_GPO_2		0x20	/* GPIO2 Output value */
+#define AX_GPIO_RESERVED	0x40	/* Reserved */
+#define AX_GPIO_RSE		0x80	/* Reload serial EEPROM */
+
+#define AX_EEPROM_MAGIC		0xdeadbeef
+#define AX88172_EEPROM_LEN	0x40
+#define AX88772_EEPROM_LEN	0xff
+
+#define PHY_MODE_MARVELL	0x0000
+#define MII_MARVELL_LED_CTRL	0x0018
+#define MII_MARVELL_STATUS	0x001b
+#define MII_MARVELL_CTRL	0x0014
+
+#define MARVELL_LED_MANUAL	0x0019
+
+#define MARVELL_STATUS_HWCFG	0x0004
+
+#define MARVELL_CTRL_TXDELAY	0x0002
+#define MARVELL_CTRL_RXDELAY	0x0080
+
+#define	PHY_MODE_RTL8211CL	0x000C
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct asix_data {
+	u8 multi_filter[AX_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
+	u8 phymode;
+	u8 ledmode;
+	u8 eeprom_len;
+};
+
+struct ax88172_int_data {
+	__le16 res1;
+	u8 link;
+	__le16 res2;
+	u8 status;
+	__le16 res3;
+} __packed;
+
+static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			    u16 size, void *data)
+{
+	void *buf;
+	int err = -ENOMEM;
+
+	netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+		   cmd, value, index, size);
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		goto out;
+
+	err = usb_control_msg(
+		dev->udev,
+		usb_rcvctrlpipe(dev->udev, 0),
+		cmd,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		value,
+		index,
+		buf,
+		size,
+		USB_CTRL_GET_TIMEOUT);
+	if (err == size)
+		memcpy(data, buf, size);
+	else if (err >= 0)
+		err = -EINVAL;
+	kfree(buf);
+
+out:
+	return err;
+}
+
+static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			     u16 size, void *data)
+{
+	void *buf = NULL;
+	int err = -ENOMEM;
+
+	netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+		   cmd, value, index, size);
+
+	if (data) {
+		buf = kmemdup(data, size, GFP_KERNEL);
+		if (!buf)
+			goto out;
+	}
+
+	err = usb_control_msg(
+		dev->udev,
+		usb_sndctrlpipe(dev->udev, 0),
+		cmd,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		value,
+		index,
+		buf,
+		size,
+		USB_CTRL_SET_TIMEOUT);
+	kfree(buf);
+
+out:
+	return err;
+}
+
+static void asix_async_cmd_callback(struct urb *urb)
+{
+	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+	int status = urb->status;
+
+	if (status < 0)
+		printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d",
+			status);
+
+	kfree(req);
+	usb_free_urb(urb);
+}
+
+static void
+asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+				    u16 size, void *data)
+{
+	struct usb_ctrlrequest *req;
+	int status;
+	struct urb *urb;
+
+	netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+		   cmd, value, index, size);
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n");
+		return;
+	}
+
+	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+	if (!req) {
+		netdev_err(dev->net, "Failed to allocate memory for control request\n");
+		usb_free_urb(urb);
+		return;
+	}
+
+	req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+	req->bRequest = cmd;
+	req->wValue = cpu_to_le16(value);
+	req->wIndex = cpu_to_le16(index);
+	req->wLength = cpu_to_le16(size);
+
+	usb_fill_control_urb(urb, dev->udev,
+			     usb_sndctrlpipe(dev->udev, 0),
+			     (void *)req, data, size,
+			     asix_async_cmd_callback, req);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status < 0) {
+		netdev_err(dev->net, "Error submitting the control message: status=%d\n",
+			   status);
+		kfree(req);
+		usb_free_urb(urb);
+	}
+}
+
+static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int offset = 0;
+
+	while (offset + sizeof(u32) < skb->len) {
+		struct sk_buff *ax_skb;
+		u16 size;
+		u32 header = get_unaligned_le32(skb->data + offset);
+
+		offset += sizeof(u32);
+
+		/* get the packet length */
+		size = (u16) (header & 0x7ff);
+		if (size != ((~header >> 16) & 0x07ff)) {
+			netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n");
+			return 0;
+		}
+
+		if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
+		    (size + offset > skb->len)) {
+			netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
+				   size);
+			return 0;
+		}
+		ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
+		if (!ax_skb)
+			return 0;
+
+		skb_put(ax_skb, size);
+		memcpy(ax_skb->data, skb->data + offset, size);
+		usbnet_skb_return(dev, ax_skb);
+
+		offset += (size + 1) & 0xfffe;
+	}
+
+	if (skb->len != offset) {
+		netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n",
+			   skb->len);
+		return 0;
+	}
+	return 1;
+}
+
+static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+					gfp_t flags)
+{
+	int padlen;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	u32 packet_len;
+	u32 padbytes = 0xffff0000;
+
+	padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
+
+	/* We need to push 4 bytes in front of frame (packet_len)
+	 * and maybe add 4 bytes after the end (if padlen is 4)
+	 *
+	 * Avoid skb_copy_expand() expensive call, using following rules :
+	 * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
+	 *   is false (and if we have 4 bytes of headroom)
+	 * - We are allowed to put 4 bytes at tail if skb_cloned()
+	 *   is false (and if we have 4 bytes of tailroom)
+	 *
+	 * TCP packets for example are cloned, but skb_header_release()
+	 * was called in tcp stack, allowing us to use headroom for our needs.
+	 */
+	if (!skb_header_cloned(skb) &&
+	    !(padlen && skb_cloned(skb)) &&
+	    headroom + tailroom >= 4 + padlen) {
+		/* following should not happen, but better be safe */
+		if (headroom < 4 ||
+		    tailroom < padlen) {
+			skb->data = memmove(skb->head + 4, skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, 4, padlen, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
+	skb_push(skb, 4);
+	cpu_to_le32s(&packet_len);
+	skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
+
+	if (padlen) {
+		cpu_to_le32s(&padbytes);
+		memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
+		skb_put(skb, sizeof(padbytes));
+	}
+	return skb;
+}
+
+static void asix_status(struct usbnet *dev, struct urb *urb)
+{
+	struct ax88172_int_data *event;
+	int link;
+
+	if (urb->actual_length < 8)
+		return;
+
+	event = urb->transfer_buffer;
+	link = event->link & 0x01;
+	if (netif_carrier_ok(dev->net) != link) {
+		if (link) {
+			netif_carrier_on(dev->net);
+			usbnet_defer_kevent (dev, EVENT_LINK_RESET );
+		} else
+			netif_carrier_off(dev->net);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static inline int asix_set_sw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable software MII access\n");
+	return ret;
+}
+
+static inline int asix_set_hw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable hardware MII access\n");
+	return ret;
+}
+
+static inline int asix_get_phy_addr(struct usbnet *dev)
+{
+	u8 buf[2];
+	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
+
+	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
+		goto out;
+	}
+	netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n",
+		   *((__le16 *)buf));
+	ret = buf[1];
+
+out:
+	return ret;
+}
+
+static int asix_sw_reset(struct usbnet *dev, u8 flags)
+{
+	int ret;
+
+        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
+
+	return ret;
+}
+
+static u16 asix_read_rx_ctl(struct usbnet *dev)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
+		goto out;
+	}
+	ret = le16_to_cpu(v);
+out:
+	return ret;
+}
+
+static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+static u16 asix_read_medium_status(struct usbnet *dev)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
+			   ret);
+		return ret;	/* TODO: callers not checking for error ret */
+	}
+
+	return le16_to_cpu(v);
+
+}
+
+static int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
+			   value, ret);
+
+	if (sleep)
+		msleep(sleep);
+
+	return ret;
+}
+
+/*
+ * AX88772 & AX88178 have a 16-bit RX_CTL value
+ */
+static void asix_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u16 rx_ctl = AX_DEFAULT_RX_CTL;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= AX_RX_CTL_PRO;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		rx_ctl |= AX_RX_CTL_AMALL;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= AX_RX_CTL_AM;
+	}
+
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+
+	mutex_lock(&dev->phy_mutex);
+	asix_set_sw_mii(dev);
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+				(__u16)loc, 2, &res);
+	asix_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+static void
+asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
+	mutex_lock(&dev->phy_mutex);
+	asix_set_sw_mii(dev);
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
+	asix_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
+static u32 asix_get_phyid(struct usbnet *dev)
+{
+	int phy_reg;
+	u32 phy_id;
+	int i;
+
+	/* Poll for the rare case the FW or phy isn't ready yet.  */
+	for (i = 0; i < 100; i++) {
+		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg != 0 && phy_reg != 0xFFFF)
+			break;
+		mdelay(1);
+	}
+
+	if (phy_reg <= 0 || phy_reg == 0xFFFF)
+		return 0;
+
+	phy_id = (phy_reg & 0xffff) << 16;
+
+	phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
+	if (phy_reg < 0)
+		return 0;
+
+	phy_id |= (phy_reg & 0xffff);
+
+	return phy_id;
+}
+
+static void
+asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt;
+
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+		wolinfo->supported = 0;
+		wolinfo->wolopts = 0;
+		return;
+	}
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = 0;
+	if (opt & AX_MONITOR_LINK)
+		wolinfo->wolopts |= WAKE_PHY;
+	if (opt & AX_MONITOR_MAGIC)
+		wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int
+asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt = 0;
+
+	if (wolinfo->wolopts & WAKE_PHY)
+		opt |= AX_MONITOR_LINK;
+	if (wolinfo->wolopts & WAKE_MAGIC)
+		opt |= AX_MONITOR_MAGIC;
+
+	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+			      opt, 0, 0, NULL) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int asix_get_eeprom_len(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+
+	return data->eeprom_len;
+}
+
+static int asix_get_eeprom(struct net_device *net,
+			      struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	__le16 *ebuf = (__le16 *)data;
+	int i;
+
+	/* Crude hack to ensure that we don't overwrite memory
+	 * if an odd length is supplied
+	 */
+	if (eeprom->len % 2)
+		return -EINVAL;
+
+	eeprom->magic = AX_EEPROM_MAGIC;
+
+	/* ax8817x returns 2 bytes from eeprom on read */
+	for (i=0; i < eeprom->len / 2; i++) {
+		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
+			eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static void asix_get_drvinfo (struct net_device *net,
+				 struct ethtool_drvinfo *info)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	strncpy (info->driver, DRIVER_NAME, sizeof info->driver);
+	strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+	info->eedump_len = data->eeprom_len;
+}
+
+static u32 asix_get_link(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return mii_link_ok(&dev->mii);
+}
+
+static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static int asix_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+
+	return 0;
+}
+
+/* We need to override some ethtool_ops so we require our
+   own structure so we don't interfere with other usbnet
+   devices that may be connected at the same time. */
+static const struct ethtool_ops ax88172_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= asix_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
+};
+
+static void ax88172_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u8 rx_ctl = 0x8c;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= 0x01;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		rx_ctl |= 0x02;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= 0x10;
+	}
+
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int ax88172_link_reset(struct usbnet *dev)
+{
+	u8 mode;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = AX88172_MEDIUM_DEFAULT;
+
+	if (ecmd.duplex != DUPLEX_FULL)
+		mode |= ~AX88172_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
+
+	asix_write_medium_mode(dev, mode);
+
+	return 0;
+}
+
+static const struct net_device_ops ax88172_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= asix_ioctl,
+	.ndo_set_rx_mode	= ax88172_set_multicast,
+};
+
+static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret = 0;
+	u8 buf[ETH_ALEN];
+	int i;
+	unsigned long gpio_bits = dev->driver_info->data;
+	struct asix_data *data = (struct asix_data *)&dev->data;
+
+	data->eeprom_len = AX88172_EEPROM_LEN;
+
+	usbnet_get_endpoints(dev,intf);
+
+	/* Toggle the GPIOs in a manufacturer/model specific way */
+	for (i = 2; i >= 0; i--) {
+		ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL);
+		if (ret < 0)
+			goto out;
+		msleep(5);
+	}
+
+	ret = asix_write_rx_ctl(dev, 0x80);
+	if (ret < 0)
+		goto out;
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	if (ret < 0) {
+		dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
+		goto out;
+	}
+	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
+	dev->mii.phy_id_mask = 0x3f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = asix_get_phy_addr(dev);
+
+	dev->net->netdev_ops = &ax88172_netdev_ops;
+	dev->net->ethtool_ops = &ax88172_ethtool_ops;
+	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
+	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	mii_nway_restart(&dev->mii);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static const struct ethtool_ops ax88772_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= asix_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
+};
+
+static int ax88772_link_reset(struct usbnet *dev)
+{
+	u16 mode;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = AX88772_MEDIUM_DEFAULT;
+
+	if (ethtool_cmd_speed(&ecmd) != SPEED_100)
+		mode &= ~AX_MEDIUM_PS;
+
+	if (ecmd.duplex != DUPLEX_FULL)
+		mode &= ~AX_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
+
+	asix_write_medium_mode(dev, mode);
+
+	return 0;
+}
+
+static int ax88772_reset(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret, embd_phy;
+	u16 rx_ctl;
+
+	ret = asix_write_gpio(dev,
+			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5);
+	if (ret < 0)
+		goto out;
+
+	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		dbg("Select PHY #1 failed: %d", ret);
+		goto out;
+	}
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	if (embd_phy) {
+		ret = asix_sw_reset(dev, AX_SWRESET_IPRL);
+		if (ret < 0)
+			goto out;
+	} else {
+		ret = asix_sw_reset(dev, AX_SWRESET_PRTE);
+		if (ret < 0)
+			goto out;
+	}
+
+	msleep(150);
+	rx_ctl = asix_read_rx_ctl(dev);
+	dbg("RX_CTL is 0x%04x after software reset", rx_ctl);
+	ret = asix_write_rx_ctl(dev, 0x0000);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev);
+	dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+			ADVERTISE_ALL | ADVERTISE_CSMA);
+	mii_nway_restart(&dev->mii);
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+				AX88772_IPG2_DEFAULT, 0, NULL);
+	if (ret < 0) {
+		dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
+		goto out;
+	}
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev);
+	dbg("RX_CTL is 0x%04x after all initializations", rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev);
+	dbg("Medium Status is 0x%04x after all initializations", rx_ctl);
+
+	return 0;
+
+out:
+	return ret;
+
+}
+
+static const struct net_device_ops ax88772_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address 	= asix_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= asix_ioctl,
+	.ndo_set_rx_mode        = asix_set_multicast,
+};
+
+static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret, embd_phy;
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u8 buf[ETH_ALEN];
+	u32 phyid;
+
+	data->eeprom_len = AX88772_EEPROM_LEN;
+
+	usbnet_get_endpoints(dev,intf);
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	if (ret < 0) {
+		dbg("Failed to read MAC address: %d", ret);
+		return ret;
+	}
+	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = asix_get_phy_addr(dev);
+
+	dev->net->netdev_ops = &ax88772_netdev_ops;
+	dev->net->ethtool_ops = &ax88772_ethtool_ops;
+	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
+	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
+
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+
+	/* Reset the PHY to normal operation mode */
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		dbg("Select PHY #1 failed: %d", ret);
+		return ret;
+	}
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
+	if (ret < 0)
+		return ret;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	if (ret < 0)
+		return ret;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE);
+
+	/* Read PHYID register *AFTER* the PHY was reset properly */
+	phyid = asix_get_phyid(dev);
+	dbg("PHYID=0x%08x", phyid);
+
+	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+		/* hard_mtu  is still the default - the device does not support
+		   jumbo eth frames */
+		dev->rx_urb_size = 2048;
+	}
+
+	return 0;
+}
+
+static const struct ethtool_ops ax88178_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= asix_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.get_settings		= usbnet_get_settings,
+	.set_settings		= usbnet_set_settings,
+	.nway_reset		= usbnet_nway_reset,
+};
+
+static int marvell_phy_init(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u16 reg;
+
+	netdev_dbg(dev->net, "marvell_phy_init()\n");
+
+	reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
+	netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
+			MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
+
+	if (data->ledmode) {
+		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+			MII_MARVELL_LED_CTRL);
+		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
+
+		reg &= 0xf8ff;
+		reg |= (1 + 0x0100);
+		asix_mdio_write(dev->net, dev->mii.phy_id,
+			MII_MARVELL_LED_CTRL, reg);
+
+		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+			MII_MARVELL_LED_CTRL);
+		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
+		reg &= 0xfc0f;
+	}
+
+	return 0;
+}
+
+static int rtl8211cl_phy_init(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+
+	netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
+
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005);
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0);
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x01,
+		asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080);
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
+
+	if (data->ledmode == 12) {
+		asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002);
+		asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb);
+		asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
+	}
+
+	return 0;
+}
+
+static int marvell_led_status(struct usbnet *dev, u16 speed)
+{
+	u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
+
+	netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
+
+	/* Clear out the center LED bits - 0x03F0 */
+	reg &= 0xfc0f;
+
+	switch (speed) {
+		case SPEED_1000:
+			reg |= 0x03e0;
+			break;
+		case SPEED_100:
+			reg |= 0x03b0;
+			break;
+		default:
+			reg |= 0x02f0;
+	}
+
+	netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
+
+	return 0;
+}
+
+static int ax88178_reset(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret;
+	__le16 eeprom;
+	u8 status;
+	int gpio0 = 0;
+	u32 phyid;
+
+	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
+	dbg("GPIO Status: 0x%04x", status);
+
+	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
+	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
+	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
+
+	dbg("EEPROM index 0x17 is 0x%04x", eeprom);
+
+	if (eeprom == cpu_to_le16(0xffff)) {
+		data->phymode = PHY_MODE_MARVELL;
+		data->ledmode = 0;
+		gpio0 = 1;
+	} else {
+		data->phymode = le16_to_cpu(eeprom) & 0x7F;
+		data->ledmode = le16_to_cpu(eeprom) >> 8;
+		gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
+	}
+	dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
+
+	/* Power up external GigaPHY through AX88178 GPIO pin */
+	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
+	if ((le16_to_cpu(eeprom) >> 8) != 1) {
+		asix_write_gpio(dev, 0x003c, 30);
+		asix_write_gpio(dev, 0x001c, 300);
+		asix_write_gpio(dev, 0x003c, 30);
+	} else {
+		dbg("gpio phymode == 1 path");
+		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
+	}
+
+	/* Read PHYID register *AFTER* powering up PHY */
+	phyid = asix_get_phyid(dev);
+	dbg("PHYID=0x%08x", phyid);
+
+	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+
+	asix_sw_reset(dev, 0);
+	msleep(150);
+
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	msleep(150);
+
+	asix_write_rx_ctl(dev, 0);
+
+	if (data->phymode == PHY_MODE_MARVELL) {
+		marvell_phy_init(dev);
+		msleep(60);
+	} else if (data->phymode == PHY_MODE_RTL8211CL)
+		rtl8211cl_phy_init(dev);
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
+			BMCR_RESET | BMCR_ANENABLE);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
+			ADVERTISE_1000FULL);
+
+	mii_nway_restart(&dev->mii);
+
+	ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT);
+	if (ret < 0)
+		return ret;
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+	if (ret < 0)
+		return ret;
+
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ax88178_link_reset(struct usbnet *dev)
+{
+	u16 mode;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u32 speed;
+
+	netdev_dbg(dev->net, "ax88178_link_reset()\n");
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = AX88178_MEDIUM_DEFAULT;
+	speed = ethtool_cmd_speed(&ecmd);
+
+	if (speed == SPEED_1000)
+		mode |= AX_MEDIUM_GM;
+	else if (speed == SPEED_100)
+		mode |= AX_MEDIUM_PS;
+	else
+		mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+
+	mode |= AX_MEDIUM_ENCK;
+
+	if (ecmd.duplex == DUPLEX_FULL)
+		mode |= AX_MEDIUM_FD;
+	else
+		mode &= ~AX_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   speed, ecmd.duplex, mode);
+
+	asix_write_medium_mode(dev, mode);
+
+	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
+		marvell_led_status(dev, speed);
+
+	return 0;
+}
+
+static void ax88178_set_mfb(struct usbnet *dev)
+{
+	u16 mfb = AX_RX_CTL_MFB_16384;
+	u16 rxctl;
+	u16 medium;
+	int old_rx_urb_size = dev->rx_urb_size;
+
+	if (dev->hard_mtu < 2048) {
+		dev->rx_urb_size = 2048;
+		mfb = AX_RX_CTL_MFB_2048;
+	} else if (dev->hard_mtu < 4096) {
+		dev->rx_urb_size = 4096;
+		mfb = AX_RX_CTL_MFB_4096;
+	} else if (dev->hard_mtu < 8192) {
+		dev->rx_urb_size = 8192;
+		mfb = AX_RX_CTL_MFB_8192;
+	} else if (dev->hard_mtu < 16384) {
+		dev->rx_urb_size = 16384;
+		mfb = AX_RX_CTL_MFB_16384;
+	}
+
+	rxctl = asix_read_rx_ctl(dev);
+	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
+
+	medium = asix_read_medium_status(dev);
+	if (dev->net->mtu > 1500)
+		medium |= AX_MEDIUM_JFE;
+	else
+		medium &= ~AX_MEDIUM_JFE;
+	asix_write_medium_mode(dev, medium);
+
+	if (dev->rx_urb_size > old_rx_urb_size)
+		usbnet_unlink_rx_urbs(dev);
+}
+
+static int ax88178_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(net);
+	int ll_mtu = new_mtu + net->hard_header_len + 4;
+
+	netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
+
+	if (new_mtu <= 0 || ll_mtu > 16384)
+		return -EINVAL;
+
+	if ((ll_mtu % dev->maxpacket) == 0)
+		return -EDOM;
+
+	net->mtu = new_mtu;
+	dev->hard_mtu = net->mtu + net->hard_header_len;
+	ax88178_set_mfb(dev);
+
+	return 0;
+}
+
+static const struct net_device_ops ax88178_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_set_mac_address 	= asix_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_rx_mode	= asix_set_multicast,
+	.ndo_do_ioctl 		= asix_ioctl,
+	.ndo_change_mtu 	= ax88178_change_mtu,
+};
+
+static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	u8 buf[ETH_ALEN];
+	struct asix_data *data = (struct asix_data *)&dev->data;
+
+	data->eeprom_len = AX88772_EEPROM_LEN;
+
+	usbnet_get_endpoints(dev,intf);
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
+	if (ret < 0) {
+		dbg("Failed to read MAC address: %d", ret);
+		return ret;
+	}
+	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0xff;
+	dev->mii.supports_gmii = 1;
+	dev->mii.phy_id = asix_get_phy_addr(dev);
+
+	dev->net->netdev_ops = &ax88178_netdev_ops;
+	dev->net->ethtool_ops = &ax88178_ethtool_ops;
+
+	/* Blink LEDS so users know driver saw dongle */
+	asix_sw_reset(dev, 0);
+	msleep(150);
+
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	msleep(150);
+
+	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+		/* hard_mtu  is still the default - the device does not support
+		   jumbo eth frames */
+		dev->rx_urb_size = 2048;
+	}
+
+	return 0;
+}
+
+static const struct driver_info ax8817x_info = {
+	.description = "ASIX AX8817x USB 2.0 Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x00130103,
+};
+
+static const struct driver_info dlink_dub_e100_info = {
+	.description = "DLink DUB-E100 USB Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x009f9d9f,
+};
+
+static const struct driver_info netgear_fa120_info = {
+	.description = "Netgear FA-120 USB Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x00130103,
+};
+
+static const struct driver_info hawking_uf200_info = {
+	.description = "Hawking UF200 USB Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x001f1d1f,
+};
+
+static const struct driver_info ax88772_info = {
+	.description = "ASIX AX88772 USB 2.0 Ethernet",
+	.bind = ax88772_bind,
+	.status = asix_status,
+	.link_reset = ax88772_link_reset,
+	.reset = ax88772_reset,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup,
+	.tx_fixup = asix_tx_fixup,
+};
+
+static const struct driver_info ax88178_info = {
+	.description = "ASIX AX88178 USB 2.0 Ethernet",
+	.bind = ax88178_bind,
+	.status = asix_status,
+	.link_reset = ax88178_link_reset,
+	.reset = ax88178_reset,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR,
+	.rx_fixup = asix_rx_fixup,
+	.tx_fixup = asix_tx_fixup,
+};
+
+static const struct usb_device_id	products [] = {
+{
+	// Linksys USB200M
+	USB_DEVICE (0x077b, 0x2226),
+	.driver_info =	(unsigned long) &ax8817x_info,
+}, {
+	// Netgear FA120
+	USB_DEVICE (0x0846, 0x1040),
+	.driver_info =  (unsigned long) &netgear_fa120_info,
+}, {
+	// DLink DUB-E100
+	USB_DEVICE (0x2001, 0x1a00),
+	.driver_info =  (unsigned long) &dlink_dub_e100_info,
+}, {
+	// Intellinet, ST Lab USB Ethernet
+	USB_DEVICE (0x0b95, 0x1720),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Hawking UF200, TrendNet TU2-ET100
+	USB_DEVICE (0x07b8, 0x420a),
+	.driver_info =  (unsigned long) &hawking_uf200_info,
+}, {
+	// Billionton Systems, USB2AR
+	USB_DEVICE (0x08dd, 0x90ff),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// ATEN UC210T
+	USB_DEVICE (0x0557, 0x2009),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Buffalo LUA-U2-KTX
+	USB_DEVICE (0x0411, 0x003d),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Buffalo LUA-U2-GT 10/100/1000
+	USB_DEVICE (0x0411, 0x006e),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
+	// Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
+	USB_DEVICE (0x6189, 0x182d),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
+	USB_DEVICE (0x0df6, 0x0056),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
+	// corega FEther USB2-TX
+	USB_DEVICE (0x07aa, 0x0017),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Surecom EP-1427X-2
+	USB_DEVICE (0x1189, 0x0893),
+	.driver_info = (unsigned long) &ax8817x_info,
+}, {
+	// goodway corp usb gwusb2e
+	USB_DEVICE (0x1631, 0x6200),
+	.driver_info = (unsigned long) &ax8817x_info,
+}, {
+	// JVC MP-PRX1 Port Replicator
+	USB_DEVICE (0x04f1, 0x3008),
+	.driver_info = (unsigned long) &ax8817x_info,
+}, {
+	// ASIX AX88772B 10/100
+	USB_DEVICE (0x0b95, 0x772b),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// ASIX AX88772 10/100
+	USB_DEVICE (0x0b95, 0x7720),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// ASIX AX88178 10/100/1000
+	USB_DEVICE (0x0b95, 0x1780),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Logitec LAN-GTJ/U2A
+	USB_DEVICE (0x0789, 0x0160),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Linksys USB200M Rev 2
+	USB_DEVICE (0x13b1, 0x0018),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// 0Q0 cable ethernet
+	USB_DEVICE (0x1557, 0x7720),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// DLink DUB-E100 H/W Ver B1
+	USB_DEVICE (0x07d1, 0x3c05),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// DLink DUB-E100 H/W Ver B1 Alternate
+	USB_DEVICE (0x2001, 0x3c05),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Linksys USB1000
+	USB_DEVICE (0x1737, 0x0039),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// IO-DATA ETG-US2
+	USB_DEVICE (0x04bb, 0x0930),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Belkin F5D5055
+	USB_DEVICE(0x050d, 0x5055),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Apple USB Ethernet Adapter
+	USB_DEVICE(0x05ac, 0x1402),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Cables-to-Go USB Ethernet Adapter
+	USB_DEVICE(0x0b95, 0x772a),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// ABOCOM for pci
+	USB_DEVICE(0x14ea, 0xab11),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// ASIX 88772a
+	USB_DEVICE(0x0db0, 0xa877),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Asus USB Ethernet Adapter
+	USB_DEVICE (0x0b95, 0x7e2b),
+	.driver_info = (unsigned long) &ax88772_info,
+},
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver asix_driver = {
+	.name =		DRIVER_NAME,
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disconnect =	usbnet_disconnect,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(asix_driver);
+
+MODULE_AUTHOR("David Hollis");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");
+