summaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug/cpqphp_ctrl.c
diff options
context:
space:
mode:
authorHarvey Harrison <harvey.harrison@gmail.com>2008-03-03 19:09:46 -0800
committerGreg Kroah-Hartman <gregkh@suse.de>2008-04-20 21:47:09 -0700
commit66bef8c059015ba2b36bb5759080336feb01e680 (patch)
tree9060b134ba07e052bf40e0fbe641dfaa86bcbd9d /drivers/pci/hotplug/cpqphp_ctrl.c
parentca99eb8c2d56bdfff0161388b81e641f4e039b3f (diff)
downloadlinux-next-66bef8c059015ba2b36bb5759080336feb01e680.tar.gz
PCI: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/pci/hotplug/cpqphp_ctrl.c')
-rw-r--r--drivers/pci/hotplug/cpqphp_ctrl.c64
1 files changed, 32 insertions, 32 deletions
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 4018420c6f95..ef041ca91c27 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -737,12 +737,12 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
for (node = *head; node; node = node->next) {
dbg("%s: req_size =%x node=%p, base=%x, length=%x\n",
- __FUNCTION__, size, node, node->base, node->length);
+ __func__, size, node, node->base, node->length);
if (node->length < size)
continue;
if (node->base & (size - 1)) {
- dbg("%s: not aligned\n", __FUNCTION__);
+ dbg("%s: not aligned\n", __func__);
/* this one isn't base aligned properly
* so we'll make a new entry and split it up */
temp_dword = (node->base | (size-1)) + 1;
@@ -767,7 +767,7 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
/* Don't need to check if too small since we already did */
if (node->length > size) {
- dbg("%s: too big\n", __FUNCTION__);
+ dbg("%s: too big\n", __func__);
/* this one is longer than we need
* so we'll make a new entry and split it up */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
@@ -784,7 +784,7 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
node->next = split_node;
} /* End of too big on top end */
- dbg("%s: got one!!!\n", __FUNCTION__);
+ dbg("%s: got one!!!\n", __func__);
/* If we got here, then it is the right size
* Now take it out of the list */
if (*head == node) {
@@ -819,7 +819,7 @@ int cpqhp_resource_sort_and_combine(struct pci_resource **head)
struct pci_resource *node2;
int out_of_order = 1;
- dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head);
+ dbg("%s: head = %p, *head = %p\n", __func__, head, *head);
if (!(*head))
return 1;
@@ -907,7 +907,7 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data)
/* Read to clear posted writes */
misc = readw(ctrl->hpc_reg + MISC);
- dbg ("%s - waking up\n", __FUNCTION__);
+ dbg ("%s - waking up\n", __func__);
wake_up_interruptible(&ctrl->queue);
}
@@ -1421,7 +1421,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
hp_slot = func->device - ctrl->slot_device_offset;
dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n",
- __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
+ __func__, func->device, ctrl->slot_device_offset, hp_slot);
mutex_lock(&ctrl->crit_sect);
@@ -1466,55 +1466,55 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
/* turn on board and blink green LED */
- dbg("%s: before down\n", __FUNCTION__);
+ dbg("%s: before down\n", __func__);
mutex_lock(&ctrl->crit_sect);
- dbg("%s: after down\n", __FUNCTION__);
+ dbg("%s: after down\n", __func__);
- dbg("%s: before slot_enable\n", __FUNCTION__);
+ dbg("%s: before slot_enable\n", __func__);
slot_enable (ctrl, hp_slot);
- dbg("%s: before green_LED_blink\n", __FUNCTION__);
+ dbg("%s: before green_LED_blink\n", __func__);
green_LED_blink (ctrl, hp_slot);
- dbg("%s: before amber_LED_blink\n", __FUNCTION__);
+ dbg("%s: before amber_LED_blink\n", __func__);
amber_LED_off (ctrl, hp_slot);
- dbg("%s: before set_SOGO\n", __FUNCTION__);
+ dbg("%s: before set_SOGO\n", __func__);
set_SOGO(ctrl);
/* Wait for SOBS to be unset */
- dbg("%s: before wait_for_ctrl_irq\n", __FUNCTION__);
+ dbg("%s: before wait_for_ctrl_irq\n", __func__);
wait_for_ctrl_irq (ctrl);
- dbg("%s: after wait_for_ctrl_irq\n", __FUNCTION__);
+ dbg("%s: after wait_for_ctrl_irq\n", __func__);
- dbg("%s: before up\n", __FUNCTION__);
+ dbg("%s: before up\n", __func__);
mutex_unlock(&ctrl->crit_sect);
- dbg("%s: after up\n", __FUNCTION__);
+ dbg("%s: after up\n", __func__);
/* Wait for ~1 second because of hot plug spec */
- dbg("%s: before long_delay\n", __FUNCTION__);
+ dbg("%s: before long_delay\n", __func__);
long_delay(1*HZ);
- dbg("%s: after long_delay\n", __FUNCTION__);
+ dbg("%s: after long_delay\n", __func__);
- dbg("%s: func status = %x\n", __FUNCTION__, func->status);
+ dbg("%s: func status = %x\n", __func__, func->status);
/* Check for a power fault */
if (func->status == 0xFF) {
/* power fault occurred, but it was benign */
temp_register = 0xFFFFFFFF;
- dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register);
+ dbg("%s: temp register set to %x by power fault\n", __func__, temp_register);
rc = POWER_FAILURE;
func->status = 0;
} else {
/* Get vendor/device ID u32 */
ctrl->pci_bus->number = func->bus;
rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), PCI_VENDOR_ID, &temp_register);
- dbg("%s: pci_read_config_dword returns %d\n", __FUNCTION__, rc);
- dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register);
+ dbg("%s: pci_read_config_dword returns %d\n", __func__, rc);
+ dbg("%s: temp_register is %x\n", __func__, temp_register);
if (rc != 0) {
/* Something's wrong here */
temp_register = 0xFFFFFFFF;
- dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register);
+ dbg("%s: temp register set to %x by error\n", __func__, temp_register);
}
/* Preset return code. It will be changed later if things go okay. */
rc = NO_ADAPTER_PRESENT;
@@ -1530,7 +1530,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
rc = configure_new_device(ctrl, func, 0, &res_lists);
- dbg("%s: back from configure_new_device\n", __FUNCTION__);
+ dbg("%s: back from configure_new_device\n", __func__);
ctrl->io_head = res_lists.io_head;
ctrl->mem_head = res_lists.mem_head;
ctrl->p_mem_head = res_lists.p_mem_head;
@@ -1566,7 +1566,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
/* next, we will instantiate the linux pci_dev structures (with
* appropriate driver notification, if already present) */
- dbg("%s: configure linux pci_dev structure\n", __FUNCTION__);
+ dbg("%s: configure linux pci_dev structure\n", __func__);
index = 0;
do {
new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
@@ -1628,7 +1628,7 @@ static u32 remove_board(struct pci_func * func, u32 replace_flag, struct control
device = func->device;
hp_slot = func->device - ctrl->slot_device_offset;
- dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
+ dbg("In %s, hp_slot = %d\n", __func__, hp_slot);
/* When we get here, it is safe to change base address registers.
* We will attempt to save the base address register lengths */
@@ -1928,7 +1928,7 @@ void cpqhp_pushbutton_thread(unsigned long slot)
func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
dbg("In power_down_board, func = %p, ctrl = %p\n", func, ctrl);
if (!func) {
- dbg("Error! func NULL in %s\n", __FUNCTION__);
+ dbg("Error! func NULL in %s\n", __func__);
return ;
}
@@ -1950,7 +1950,7 @@ void cpqhp_pushbutton_thread(unsigned long slot)
func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
dbg("In add_board, func = %p, ctrl = %p\n", func, ctrl);
if (!func) {
- dbg("Error! func NULL in %s\n", __FUNCTION__);
+ dbg("Error! func NULL in %s\n", __func__);
return ;
}
@@ -2058,7 +2058,7 @@ int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func)
}
if (rc) {
- dbg("%s: rc = %d\n", __FUNCTION__, rc);
+ dbg("%s: rc = %d\n", __func__, rc);
}
if (p_slot)
@@ -2269,12 +2269,12 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func
new_slot = func;
- dbg("%s\n", __FUNCTION__);
+ dbg("%s\n", __func__);
/* Check for Multi-function device */
ctrl->pci_bus->number = func->bus;
rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte);
if (rc) {
- dbg("%s: rc = %d\n", __FUNCTION__, rc);
+ dbg("%s: rc = %d\n", __func__, rc);
return rc;
}