Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.13 series:

  Core:
   - The documentation is moved over to RST.
   - We now have agreed bindings for enabling input and output buffers
     without actually enabling input and/or output on a pin. We are
     chiseling out some details of pin control electronics.

  New drivers:
   - ZTE ZX
   - Renesas RZA1
   - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
     to use this pin controller and consolidate earlier spread out code.
   - Microschip MCP23S08: this driver is migrated from the GPIO
     subsystem and totally rewritten to use proper pin control. All
     users are switched over.

  New subdrivers:
   - Renesas R8A7743 and R8A7745.
   - Allwinner Sunxi A83T R_PIO.
   - Marvell MVEBU Armada CP110 and AP806.
   - Intel Cannon Lake PCH.
   - Qualcomm IPQ8074.

  Notable improvements:
   - IRQ support on the Marvell MVEBU Armada 37xx.
   - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
   - Rockchip driver now supports iomux-route switching for RK3228,
     RK3328 and RK3399.
   - Rockchip A10 and A20 are merged into a single driver.
   - STM32 has improved GPIO support.
   - Samsung Exynos drivers are split per ARMv7 and ARMv8.
   - Marvell MVEBU is converted to use regmap for register access.

  Maintenance:
   - Several Renesas SH-PFC refactorings and updates.
   - Serious code size cut for Mediatek MT7623.
   - Misc janitorial and MAINTAINERS fixes"

* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
  pinctrl: rza1: Remove unneeded wrong check for wrong variable
  pinctrl: qcom: Add ipq8074 pinctrl driver
  pinctrl: freescale: imx7d: make of_device_ids const.
  pinctrl: DT: extend the pinmux property to support integers array
  pinctrl: generic: Add output-enable property
  pinctrl: armada-37xx: Fix number of pin in sdio_sb
  pinctrl: armada-37xx: Fix uart2 group selection register mask
  pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
  pinctrl: sh-pfc: r8a7795: Add PWM support
  MAINTAINERS: Add Qualcomm pinctrl drivers section
  arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
  dt-bindings: pinctrl: Add RZ/A1 bindings doc
  pinctrl: Renesas RZ/A1 pin and gpio controller
  pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
  pinctrl.txt: move it to the driver-api book
  pinctrl: ingenic: checking for NULL instead of IS_ERR()
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
  ...

1 files changed, 140 insertions, 0 deletions

diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-ap806.c b/drivers/pinctrl/mvebu/pinctrl-armada-ap806.c
new file mode 100644
index 000000000000..66e442260a4e
--- /dev/null
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-ap806.c
@@ -0,0 +1,140 @@
+/*
+ * Marvell Armada ap806 pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2017 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Hanna Hawa <hannah@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+static struct mvebu_mpp_mode armada_ap806_mpp_modes[] = {
+	MPP_MODE(0,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "clk"),
+		 MPP_FUNCTION(3, "spi0",    "clk")),
+	MPP_MODE(1,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "cmd"),
+		 MPP_FUNCTION(3, "spi0",    "miso")),
+	MPP_MODE(2,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "d0"),
+		 MPP_FUNCTION(3, "spi0",    "mosi")),
+	MPP_MODE(3,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "d1"),
+		 MPP_FUNCTION(3, "spi0",    "cs0n")),
+	MPP_MODE(4,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "d2"),
+		 MPP_FUNCTION(3, "i2c0",    "sda")),
+	MPP_MODE(5,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "d3"),
+		 MPP_FUNCTION(3, "i2c0",    "sdk")),
+	MPP_MODE(6,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "ds")),
+	MPP_MODE(7,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "d4"),
+		 MPP_FUNCTION(3, "uart1",   "rxd")),
+	MPP_MODE(8,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "d5"),
+		 MPP_FUNCTION(3, "uart1",   "txd")),
+	MPP_MODE(9,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "d6"),
+		 MPP_FUNCTION(3, "spi0",    "cs1n")),
+	MPP_MODE(10,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "d7")),
+	MPP_MODE(11,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(3, "uart0",   "txd")),
+	MPP_MODE(12,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(1, "sdio",    "pw_off"),
+		 MPP_FUNCTION(2, "sdio",    "hw_rst")),
+	MPP_MODE(13,
+		 MPP_FUNCTION(0, "gpio",    NULL)),
+	MPP_MODE(14,
+		 MPP_FUNCTION(0, "gpio",    NULL)),
+	MPP_MODE(15,
+		 MPP_FUNCTION(0, "gpio",    NULL)),
+	MPP_MODE(16,
+		 MPP_FUNCTION(0, "gpio",    NULL)),
+	MPP_MODE(17,
+		 MPP_FUNCTION(0, "gpio",    NULL)),
+	MPP_MODE(18,
+		 MPP_FUNCTION(0, "gpio",    NULL)),
+	MPP_MODE(19,
+		 MPP_FUNCTION(0, "gpio",    NULL),
+		 MPP_FUNCTION(3, "uart0",   "rxd"),
+		 MPP_FUNCTION(4, "sdio",    "pw_off")),
+};
+
+static struct mvebu_pinctrl_soc_info armada_ap806_pinctrl_info;
+
+static const struct of_device_id armada_ap806_pinctrl_of_match[] = {
+	{
+		.compatible = "marvell,ap806-pinctrl",
+	},
+	{ },
+};
+
+static const struct mvebu_mpp_ctrl armada_ap806_mpp_controls[] = {
+	MPP_FUNC_CTRL(0, 19, NULL, mvebu_regmap_mpp_ctrl),
+};
+
+static struct pinctrl_gpio_range armada_ap806_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 20),
+};
+
+static int armada_ap806_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &armada_ap806_pinctrl_info;
+	const struct of_device_id *match =
+		of_match_device(armada_ap806_pinctrl_of_match, &pdev->dev);
+
+	if (!match || !pdev->dev.parent)
+		return -ENODEV;
+
+	soc->variant = 0; /* no variants for Armada AP806 */
+	soc->controls = armada_ap806_mpp_controls;
+	soc->ncontrols = ARRAY_SIZE(armada_ap806_mpp_controls);
+	soc->gpioranges = armada_ap806_mpp_gpio_ranges;
+	soc->ngpioranges = ARRAY_SIZE(armada_ap806_mpp_gpio_ranges);
+	soc->modes = armada_ap806_mpp_modes;
+	soc->nmodes = armada_ap806_mpp_controls[0].npins;
+
+	pdev->dev.platform_data = soc;
+
+	return mvebu_pinctrl_simple_regmap_probe(pdev, pdev->dev.parent, 0);
+}
+
+static struct platform_driver armada_ap806_pinctrl_driver = {
+	.driver = {
+		.name = "armada-ap806-pinctrl",
+		.of_match_table = of_match_ptr(armada_ap806_pinctrl_of_match),
+	},
+	.probe = armada_ap806_pinctrl_probe,
+};
+
+builtin_platform_driver(armada_ap806_pinctrl_driver);