scsi: qla2xxx: Leave a blank line after declarations

This patch improves readability of the qla2xxx source code.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 12 insertions, 0 deletions

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 359ebb634d96..340e266cd88c 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -608,6 +608,7 @@ qla82xx_pci_set_window(struct qla_hw_data *ha, unsigned long long addr)
 	} else if (addr_in_range(addr, QLA82XX_ADDR_OCM0,
 		QLA82XX_ADDR_OCM0_MAX)) {
 		unsigned int temp1;
+
 		if ((addr & 0x00ff800) == 0xff800) {
 			ql_log(ql_log_warn, vha, 0xb004,
 			    "%s: QM access not handled.\n", __func__);
@@ -990,6 +991,7 @@ static int
 qla82xx_read_status_reg(struct qla_hw_data *ha, uint32_t *val)
 {
 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
+
 	qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_RDSR);
 	qla82xx_wait_rom_busy(ha);
 	if (qla82xx_wait_rom_done(ha)) {
@@ -1030,6 +1032,7 @@ static int
 qla82xx_flash_set_write_enable(struct qla_hw_data *ha)
 {
 	uint32_t val;
+
 	qla82xx_wait_rom_busy(ha);
 	qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0);
 	qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_WREN);
@@ -1047,6 +1050,7 @@ static int
 qla82xx_write_status_reg(struct qla_hw_data *ha, uint32_t val)
 {
 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
+
 	if (qla82xx_flash_set_write_enable(ha))
 		return -1;
 	qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, val);
@@ -1063,6 +1067,7 @@ static int
 qla82xx_write_disable_flash(struct qla_hw_data *ha)
 {
 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
+
 	qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_WRDI);
 	if (qla82xx_wait_rom_done(ha)) {
 		ql_log(ql_log_warn, vha, 0xb00f,
@@ -1435,6 +1440,7 @@ qla82xx_fw_load_from_flash(struct qla_hw_data *ha)
 	long memaddr = BOOTLD_START;
 	u64 data;
 	u32 high, low;
+
 	size = (IMAGE_START - BOOTLD_START) / 8;
 
 	for (i = 0; i < size; i++) {
@@ -1761,6 +1767,7 @@ int
 qla82xx_reset_chip(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
+
 	ha->isp_ops->disable_intrs(ha);
 
 	return QLA_SUCCESS;
@@ -1994,6 +2001,7 @@ qla82xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
 	uint16_t __iomem *wptr;
 	struct qla_hw_data *ha = vha->hw;
 	struct device_reg_82xx __iomem *reg = &ha->iobase->isp82;
+
 	wptr = (uint16_t __iomem *)&reg->mailbox_out[1];
 
 	/* Load return mailbox registers. */
@@ -2264,6 +2272,7 @@ void
 qla82xx_enable_intrs(struct qla_hw_data *ha)
 {
 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
+
 	qla82xx_mbx_intr_enable(vha);
 	spin_lock_irq(&ha->hardware_lock);
 	if (IS_QLA8044(ha))
@@ -2278,6 +2287,7 @@ void
 qla82xx_disable_intrs(struct qla_hw_data *ha)
 {
 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
+
 	qla82xx_mbx_intr_disable(vha);
 	spin_lock_irq(&ha->hardware_lock);
 	if (IS_QLA8044(ha))
@@ -4465,6 +4475,7 @@ qla82xx_beacon_on(struct scsi_qla_host *vha)
 
 	int rval;
 	struct qla_hw_data *ha = vha->hw;
+
 	qla82xx_idc_lock(ha);
 	rval = qla82xx_mbx_beacon_ctl(vha, 1);
 
@@ -4485,6 +4496,7 @@ qla82xx_beacon_off(struct scsi_qla_host *vha)
 
 	int rval;
 	struct qla_hw_data *ha = vha->hw;
+
 	qla82xx_idc_lock(ha);
 	rval = qla82xx_mbx_beacon_ctl(vha, 0);