diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-01 16:55:57 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-01 16:55:57 -0700 |
commit | cb1595563880a81dab6eab9a5ecb4520d2e76077 (patch) | |
tree | 042907fc859287a40a454d57c034015742e38cbf /drivers/tty | |
parent | c12e69c6aaf785fd307d05cb6f36ca0e7577ead7 (diff) | |
parent | 3a13884abea08a5043b98d9374486ec859d1e03a (diff) | |
download | linux-next-cb1595563880a81dab6eab9a5ecb4520d2e76077.tar.gz |
Merge tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver update from Greg KH:
"Here's the big tty/serial driver update for 3.15-rc1.
Nothing major, a number of serial driver updates and a few tty core
fixes as well.
All have been in linux-next for a while"
* tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
tty/serial: omap: empty the RX FIFO at the end of half-duplex TX
tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX
serial: sh-sci: Neaten dev_<level> uses
serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF
serial: sh-sci: Add more register documentation
serial: sh-sci: Remove useless casts
serial: sh-sci: Replace printk() by pr_*()
serial_core: Avoid NULL pointer dereference in uart_close()
serial_core: Get a reference for port->tty in uart_remove_one_port()
serial: clps711x: Give a chance to perform useful tasks during wait loop
serial_core: Grammar s/ports/port's/
serial_core: Spelling s/contro/control/
serial: efm32: properly namespace location property
serial: max310x: Add missing #include <linux/uaccess.h>
synclink: fix info leak in ioctl
serial: 8250: Clean up the locking for -rt
serial: 8250_pci: change BayTrail default uartclk
serial: 8250_pci: more BayTrail error-free bauds
serial: sh-sci: Add missing call to uart_remove_one_port() in failure path
serial_core: Unregister console in uart_remove_one_port()
...
Diffstat (limited to 'drivers/tty')
29 files changed, 1090 insertions, 701 deletions
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index 50b46881b6ca..94f9e3a38412 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -31,6 +31,7 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/major.h> +#include <linux/atomic.h> #include <linux/sysrq.h> #include <linux/tty.h> #include <linux/tty_flip.h> @@ -70,6 +71,9 @@ static struct task_struct *hvc_task; /* Picks up late kicks after list walk but before schedule() */ static int hvc_kicked; +/* hvc_init is triggered from hvc_alloc, i.e. only when actually used */ +static atomic_t hvc_needs_init __read_mostly = ATOMIC_INIT(-1); + static int hvc_init(void); #ifdef CONFIG_MAGIC_SYSRQ @@ -851,7 +855,7 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data, int i; /* We wait until a driver actually comes along */ - if (!hvc_driver) { + if (atomic_inc_not_zero(&hvc_needs_init)) { int err = hvc_init(); if (err) return ERR_PTR(err); diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index ebd5bff0f5c1..17ee3bf0926b 100644 --- a/drivers/tty/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -176,9 +176,6 @@ void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data, ": %d chars not inserted to flip buffer!\n", length - work); - /* - * This may sleep if ->low_latency is set - */ if (work) tty_flip_buffer_push(&tty->port); } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d15624c1b751..41fe8a047d37 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1900,13 +1900,10 @@ static inline int input_available_p(struct tty_struct *tty, int poll) struct n_tty_data *ldata = tty->disc_data; int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1; - if (ldata->icanon && !L_EXTPROC(tty)) { - if (ldata->canon_head != ldata->read_tail) - return 1; - } else if (read_cnt(ldata) >= amt) - return 1; - - return 0; + if (ldata->icanon && !L_EXTPROC(tty)) + return ldata->canon_head != ldata->read_tail; + else + return read_cnt(ldata) >= amt; } /** diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 69932b7556cf..81f909c2101f 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1694,6 +1694,10 @@ static int serial_link_irq_chain(struct uart_8250_port *up) static void serial_unlink_irq_chain(struct uart_8250_port *up) { + /* + * yes, some broken gcc emit "warning: 'i' may be used uninitialized" + * but no, we are not going to take a patch that assigns NULL below. + */ struct irq_info *i; struct hlist_node *n; struct hlist_head *h; @@ -2882,14 +2886,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) touch_nmi_watchdog(); - local_irq_save(flags); - if (port->sysrq) { - /* serial8250_handle_irq() already took the lock */ - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&port->lock); - } else - spin_lock(&port->lock); + if (port->sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); /* * First save the IER then disable the interrupts @@ -2921,8 +2921,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) serial8250_modem_status(up); if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); + spin_unlock_irqrestore(&port->lock, flags); } static int __init serial8250_console_setup(struct console *co, char *options) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 0ff3e3624d4c..b14bcba96c25 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1366,23 +1366,44 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old) { unsigned int baud = tty_termios_baud_rate(termios); - unsigned int m = 6912; - unsigned int n = 15625; + unsigned int m, n; u32 reg; - /* For baud rates 1M, 2M, 3M and 4M the dividers must be adjusted. */ - if (baud == 1000000 || baud == 2000000 || baud == 4000000) { + /* + * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the + * dividers must be adjusted. + * + * uartclk = (m / n) * 100 MHz, where m <= n + */ + switch (baud) { + case 500000: + case 1000000: + case 2000000: + case 4000000: m = 64; n = 100; - p->uartclk = 64000000; - } else if (baud == 3000000) { + break; + case 3500000: + m = 56; + n = 100; + p->uartclk = 56000000; + break; + case 1500000: + case 3000000: m = 48; n = 100; - p->uartclk = 48000000; - } else { - p->uartclk = 44236800; + break; + case 2500000: + m = 40; + n = 100; + p->uartclk = 40000000; + break; + default: + m = 2304; + n = 3125; + p->uartclk = 73728000; } /* Reset the clock */ @@ -3449,6 +3470,10 @@ static struct pciserial_board pci_boards[] = { .base_baud = 921600, .reg_shift = 2, }, + /* + * Intel BayTrail HSUART reference clock is 44.2368 MHz at power-on, + * but is overridden by byt_set_termios. + */ [pbn_byt] = { .flags = FL_BASE0, .num_ports = 1, diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index a3815eaed421..2577d67bacb2 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -289,7 +289,7 @@ config SERIAL_MAX3100 MAX3100 chip support config SERIAL_MAX310X - bool "MAX310X support" + tristate "MAX310X support" depends on SPI_MASTER select SERIAL_CORE select REGMAP_SPI if SPI_MASTER @@ -708,7 +708,7 @@ config SERIAL_IP22_ZILOG_CONSOLE config SERIAL_SH_SCI tristate "SuperH SCI(F) serial port support" - depends on HAVE_CLK && (SUPERH || ARM || COMPILE_TEST) + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST select SERIAL_CORE config SERIAL_SH_SCI_NR_UARTS diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index d58783d364e3..d4eda24aa68b 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2154,9 +2154,19 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) amba_ports[i] = uap; amba_set_drvdata(dev, uap); + + if (!amba_reg.state) { + ret = uart_register_driver(&amba_reg); + if (ret < 0) { + pr_err("Failed to register AMBA-PL011 driver\n"); + return ret; + } + } + ret = uart_add_one_port(&amba_reg, &uap->port); if (ret) { amba_ports[i] = NULL; + uart_unregister_driver(&amba_reg); pl011_dma_remove(uap); } out: @@ -2175,6 +2185,7 @@ static int pl011_remove(struct amba_device *dev) amba_ports[i] = NULL; pl011_dma_remove(uap); + uart_unregister_driver(&amba_reg); return 0; } @@ -2230,22 +2241,14 @@ static struct amba_driver pl011_driver = { static int __init pl011_init(void) { - int ret; printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); - ret = uart_register_driver(&amba_reg); - if (ret == 0) { - ret = amba_driver_register(&pl011_driver); - if (ret) - uart_unregister_driver(&amba_reg); - } - return ret; + return amba_driver_register(&pl011_driver); } static void __exit pl011_exit(void) { amba_driver_unregister(&pl011_driver); - uart_unregister_driver(&amba_reg); } /* diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index a49f10d269b2..b0603e1f7d82 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -115,9 +115,6 @@ static void atmel_stop_rx(struct uart_port *port); #define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR) #define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR) -static int (*atmel_open_hook)(struct uart_port *); -static void (*atmel_close_hook)(struct uart_port *); - struct atmel_dma_buffer { unsigned char *buf; dma_addr_t dma_addr; @@ -1555,7 +1552,7 @@ static int atmel_startup(struct uart_port *port) retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, tty ? tty->name : "atmel_serial", port); if (retval) { - printk("atmel_serial: atmel_startup - Can't get irq\n"); + dev_err(port->dev, "atmel_startup - Can't get irq\n"); return retval; } @@ -1575,17 +1572,6 @@ static int atmel_startup(struct uart_port *port) if (retval < 0) atmel_set_ops(port); } - /* - * If there is a specific "open" function (to register - * control line interrupts) - */ - if (atmel_open_hook) { - retval = atmel_open_hook(port); - if (retval) { - free_irq(port->irq, port); - return retval; - } - } /* Save current CSR for comparison in atmel_tasklet_func() */ atmel_port->irq_status_prev = UART_GET_CSR(port); @@ -1684,13 +1670,6 @@ static void atmel_shutdown(struct uart_port *port) * Free the interrupt */ free_irq(port->irq, port); - - /* - * If there is a specific "close" function (to unregister - * control line interrupts) - */ - if (atmel_close_hook) - atmel_close_hook(port); } /* @@ -1738,7 +1717,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, clk_disable_unprepare(atmel_port->clk); break; default: - printk(KERN_ERR "atmel_serial: unknown pm %d\n", state); + dev_err(port->dev, "atmel_serial: unknown pm %d\n", state); } } @@ -1853,13 +1832,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, mode &= ~ATMEL_US_USMODE; if (atmel_port->rs485.flags & SER_RS485_ENABLED) { - dev_dbg(port->dev, "Setting UART to RS485\n"); if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; - } else { - dev_dbg(port->dev, "Setting UART to RS232\n"); } /* set the parity, stop bits and data size */ diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 78e82b017b92..a47421e4627c 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -30,6 +30,8 @@ #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/serial_bcm63xx.h> +#include <linux/io.h> +#include <linux/of.h> #define BCM63XX_NR_UARTS 2 @@ -588,7 +590,7 @@ static int bcm_uart_request_port(struct uart_port *port) { unsigned int size; - size = RSET_UART_SIZE; + size = UART_REG_SIZE; if (!request_mem_region(port->mapbase, size, "bcm63xx")) { dev_err(port->dev, "Memory region busy\n"); return -EBUSY; @@ -608,7 +610,7 @@ static int bcm_uart_request_port(struct uart_port *port) */ static void bcm_uart_release_port(struct uart_port *port) { - release_mem_region(port->mapbase, RSET_UART_SIZE); + release_mem_region(port->mapbase, UART_REG_SIZE); iounmap(port->membase); } @@ -805,6 +807,9 @@ static int bcm_uart_probe(struct platform_device *pdev) struct clk *clk; int ret; + if (pdev->dev.of_node) + pdev->id = of_alias_get_id(pdev->dev.of_node, "uart"); + if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS) return -EINVAL; @@ -856,6 +861,12 @@ static int bcm_uart_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id bcm63xx_of_match[] = { + { .compatible = "brcm,bcm6345-uart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, bcm63xx_of_match); + /* * platform driver stuff */ @@ -865,6 +876,7 @@ static struct platform_driver bcm_uart_platform_driver = { .driver = { .owner = THIS_MODULE, .name = "bcm63xx_uart", + .of_match_table = bcm63xx_of_match, }, }; diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index b0eacb83f831..5e6fdb1ea73b 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -368,11 +368,16 @@ static const struct uart_ops uart_clps711x_ops = { static void uart_clps711x_console_putchar(struct uart_port *port, int ch) { struct clps711x_port *s = dev_get_drvdata(port->dev); - u32 sysflg = 0; - do { + /* Wait for FIFO is not full */ + while (1) { + u32 sysflg = 0; + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); - } while (sysflg & SYSFLG_UTXFF); + if (!(sysflg & SYSFLG_UTXFF)) + break; + cond_resched(); + } writew(ch, port->membase + UARTDR_OFFSET); } @@ -382,14 +387,18 @@ static void uart_clps711x_console_write(struct console *co, const char *c, { struct uart_port *port = clps711x_uart.state[co->index].uart_port; struct clps711x_port *s = dev_get_drvdata(port->dev); - u32 sysflg = 0; uart_console_write(port, c, n, uart_clps711x_console_putchar); /* Wait for transmitter to become empty */ - do { + while (1) { + u32 sysflg = 0; + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); - } while (sysflg & SYSFLG_UBUSY); + if (!(sysflg & SYSFLG_UBUSY)) + break; + cond_resched(); + } } static int uart_clps711x_console_setup(struct console *co, char *options) diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 690bdea0a0c1..d567ac5d3af4 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -286,7 +286,6 @@ static struct e100_serial rs_table[] = { #endif }, /* ttyS0 */ -#ifndef CONFIG_SVINTO_SIM { .baud = DEF_BAUD, .ioport = (unsigned char *)R_SERIAL1_CTRL, .irq = 1U << 16, /* uses DMA 8 and 9 */ @@ -447,7 +446,6 @@ static struct e100_serial rs_table[] = { .dma_in_enabled = 0 #endif } /* ttyS3 */ -#endif }; @@ -1035,7 +1033,6 @@ cflag_to_etrax_baud(unsigned int cflag) static inline void e100_dtr(struct e100_serial *info, int set) { -#ifndef CONFIG_SVINTO_SIM unsigned char mask = e100_modem_pins[info->line].dtr_mask; #ifdef SERIAL_DEBUG_IO @@ -1060,7 +1057,6 @@ e100_dtr(struct e100_serial *info, int set) info->line, *e100_modem_pins[info->line].dtr_shadow, E100_DTR_GET(info)); #endif -#endif } /* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive @@ -1069,7 +1065,6 @@ e100_dtr(struct e100_serial *info, int set) static inline void e100_rts(struct e100_serial *info, int set) { -#ifndef CONFIG_SVINTO_SIM unsigned long flags; local_irq_save(flags); info->rx_ctrl &= ~E100_RTS_MASK; @@ -1079,7 +1074,6 @@ e100_rts(struct e100_serial *info, int set) #ifdef SERIAL_DEBUG_IO printk("ser%i rts %i\n", info->line, set); #endif -#endif } @@ -1087,7 +1081,6 @@ e100_rts(struct e100_serial *info, int set) static inline void e100_ri_out(struct e100_serial *info, int set) { -#ifndef CONFIG_SVINTO_SIM /* RI is active low */ { unsigned char mask = e100_modem_pins[info->line].ri_mask; @@ -1099,12 +1092,10 @@ e100_ri_out(struct e100_serial *info, int set) *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; local_irq_restore(flags); } -#endif } static inline void e100_cd_out(struct e100_serial *info, int set) { -#ifndef CONFIG_SVINTO_SIM /* CD is active low */ { unsigned char mask = e100_modem_pins[info->line].cd_mask; @@ -1116,27 +1107,22 @@ e100_cd_out(struct e100_serial *info, int set) *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; local_irq_restore(flags); } -#endif } static inline void e100_disable_rx(struct e100_serial *info) { -#ifndef CONFIG_SVINTO_SIM /* disable the receiver */ info->ioport[REG_REC_CTRL] = (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -#endif } static inline void e100_enable_rx(struct e100_serial *info) { -#ifndef CONFIG_SVINTO_SIM /* enable the receiver */ info->ioport[REG_REC_CTRL] = (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -#endif } /* the rx DMA uses both the dma_descr and the dma_eop interrupts */ @@ -1554,24 +1540,6 @@ transmit_chars_dma(struct e100_serial *info) unsigned int c, sentl; struct etrax_dma_descr *descr; -#ifdef CONFIG_SVINTO_SIM - /* This will output too little if tail is not 0 always since - * we don't reloop to send the other part. Anyway this SHOULD be a - * no-op - transmit_chars_dma would never really be called during sim - * since rs_write does not write into the xmit buffer then. - */ - if (info->xmit.tail) - printk("Error in serial.c:transmit_chars-dma(), tail!=0\n"); - if (info->xmit.head != info->xmit.tail) { - SIMCOUT(info->xmit.buf + info->xmit.tail, - CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE)); - info->xmit.head = info->xmit.tail; /* move back head */ - info->tr_running = 0; - } - return; -#endif /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ *info->oclrintradr = IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | @@ -1842,13 +1810,6 @@ static void receive_chars_dma(struct e100_serial *info) struct tty_struct *tty; unsigned char rstat; -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - return; -#endif - /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ *info->iclrintradr = IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | @@ -1934,12 +1895,6 @@ static int start_recv_dma(struct e100_serial *info) static void start_receive(struct e100_serial *info) { -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - return; -#endif if (info->uses_dma_in) { /* reset the input dma channel to be sure it works */ @@ -1972,17 +1927,6 @@ tr_interrupt(int irq, void *dev_id) int i; int handled = 0; -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - { - const char *s = "What? tr_interrupt in simulator??\n"; - SIMCOUT(s,strlen(s)); - } - return IRQ_HANDLED; -#endif - /* find out the line that caused this irq and get it from rs_table */ ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ @@ -2021,17 +1965,6 @@ rec_interrupt(int irq, void *dev_id) int i; int handled = 0; -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - { - const char *s = "What? rec_interrupt in simulator??\n"; - SIMCOUT(s,strlen(s)); - } - return IRQ_HANDLED; -#endif - /* find out the line that caused this irq and get it from rs_table */ ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ @@ -2173,10 +2106,6 @@ timed_flush_handler(unsigned long ptr) struct e100_serial *info; int i; -#ifdef CONFIG_SVINTO_SIM - return; -#endif - for (i = 0; i < NR_PORTS; i++) { info = rs_table + i; if (info->uses_dma_in) @@ -2729,25 +2658,6 @@ startup(struct e100_serial * info) printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf); #endif -#ifdef CONFIG_SVINTO_SIM - /* Bits and pieces collected from below. Better to have them - in one ifdef:ed clause than to mix in a lot of ifdefs, - right? */ - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->xmit.head = info->xmit.tail = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - info->rec_descr[i].buf = NULL; - - /* No real action in the simulator, but may set info important - to ioctl. */ - change_speed(info); -#else - /* * Clear the FIFO buffers and disable them * (they will be reenabled in change_speed()) @@ -2837,8 +2747,6 @@ startup(struct e100_serial * info) e100_rts(info, 1); e100_dtr(info, 1); -#endif /* CONFIG_SVINTO_SIM */ - info->port.flags |= ASYNC_INITIALIZED; local_irq_restore(flags); @@ -2857,7 +2765,6 @@ shutdown(struct e100_serial * info) struct etrax_recv_buffer *buffer; int i; -#ifndef CONFIG_SVINTO_SIM /* shut down the transmitter and receiver */ DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); e100_disable_rx(info); @@ -2882,8 +2789,6 @@ shutdown(struct e100_serial * info) info->tr_running = 0; } -#endif /* CONFIG_SVINTO_SIM */ - if (!(info->port.flags & ASYNC_INITIALIZED)) return; @@ -2995,17 +2900,12 @@ change_speed(struct e100_serial *info) IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); r_alt_ser_baudrate_shadow &= ~mask; r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); -#ifndef CONFIG_SVINTO_SIM *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; -#endif /* CONFIG_SVINTO_SIM */ info->baud = cflag_to_baud(cflag); -#ifndef CONFIG_SVINTO_SIM info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); -#endif /* CONFIG_SVINTO_SIM */ } -#ifndef CONFIG_SVINTO_SIM /* start with default settings and then fill in changes */ local_irq_save(flags); /* 8 bit, no/even parity */ @@ -3073,7 +2973,6 @@ change_speed(struct e100_serial *info) *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; local_irq_restore(flags); -#endif /* !CONFIG_SVINTO_SIM */ update_char_time(info); @@ -3122,11 +3021,6 @@ static int rs_raw_write(struct tty_struct *tty, count, info->ioport[REG_STATUS]); #endif -#ifdef CONFIG_SVINTO_SIM - /* Really simple. The output is here and now. */ - SIMCOUT(buf, count); - return count; -#endif local_save_flags(flags); DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); @@ -3463,7 +3357,6 @@ static int get_lsr_info(struct e100_serial * info, unsigned int *value) { unsigned int result = TIOCSER_TEMT; -#ifndef CONFIG_SVINTO_SIM unsigned long curr_time = jiffies; unsigned long curr_time_usec = GET_JIFFIES_USEC(); unsigned long elapsed_usec = @@ -3474,7 +3367,6 @@ get_lsr_info(struct e100_serial * info, unsigned int *value) elapsed_usec < 2*info->char_time_usec) { result = 0; } -#endif if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; @@ -3804,7 +3696,6 @@ rs_close(struct tty_struct *tty, struct file * filp) e100_disable_serial_data_irq(info); #endif -#ifndef CONFIG_SVINTO_SIM e100_disable_rx(info); e100_disable_rx_irq(info); @@ -3816,7 +3707,6 @@ rs_close(struct tty_struct *tty, struct file * filp) */ rs_wait_until_sent(tty, HZ); } -#endif shutdown(info); rs_flush_buffer(tty); @@ -4479,7 +4369,6 @@ static int __init rs_init(void) fast_timer_init(); #endif -#ifndef CONFIG_SVINTO_SIM #ifndef CONFIG_ETRAX_KGDB /* Not needed in simulator. May only complicate stuff. */ /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ @@ -4489,7 +4378,6 @@ static int __init rs_init(void) panic("%s: Failed to request irq8", __func__); #endif -#endif /* CONFIG_SVINTO_SIM */ return 0; } diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c index 0eb5b5673ede..028582e924a5 100644 --- a/drivers/tty/serial/efm32-uart.c +++ b/drivers/tty/serial/efm32-uart.c @@ -671,7 +671,10 @@ static int efm32_uart_probe_dt(struct platform_device *pdev, if (!np) return 1; - ret = of_property_read_u32(np, "location", &location); + ret = of_property_read_u32(np, "efm32,location", &location); + if (ret) + /* fall back to old and (wrongly) generic property "location" */ + ret = of_property_read_u32(np, "location", &location); if (!ret) { if (location > 5) { dev_err(&pdev->dev, "invalid location\n"); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 8978dc9a58b7..c5eb897de9de 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -13,14 +13,19 @@ #define SUPPORT_SYSRQ #endif -#include <linux/module.h> +#include <linux/clk.h> +#include <linux/console.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/dmapool.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/clk.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/console.h> +#include <linux/of_dma.h> #include <linux/serial_core.h> +#include <linux/slab.h> #include <linux/tty_flip.h> /* All registers are 8-bit width */ @@ -112,6 +117,10 @@ #define UARTSFIFO_TXOF 0x02 #define UARTSFIFO_RXUF 0x01 +#define DMA_MAXBURST 16 +#define DMA_MAXBURST_MASK (DMA_MAXBURST - 1) +#define FSL_UART_RX_DMA_BUFFER_SIZE 64 + #define DRIVER_NAME "fsl-lpuart" #define DEV_NAME "ttyLP" #define UART_NR 6 @@ -121,6 +130,24 @@ struct lpuart_port { struct clk *clk; unsigned int txfifo_size; unsigned int rxfifo_size; + + bool lpuart_dma_use; + struct dma_chan *dma_tx_chan; + struct dma_chan *dma_rx_chan; + struct dma_async_tx_descriptor *dma_tx_desc; + struct dma_async_tx_descriptor *dma_rx_desc; + dma_addr_t dma_tx_buf_bus; + dma_addr_t dma_rx_buf_bus; + dma_cookie_t dma_tx_cookie; + dma_cookie_t dma_rx_cookie; + unsigned char *dma_tx_buf_virt; + unsigned char *dma_rx_buf_virt; + unsigned int dma_tx_bytes; + unsigned int dma_rx_bytes; + int dma_tx_in_progress; + int dma_rx_in_progress; + unsigned int dma_rx_timeout; + struct timer_list lpuart_timer; }; static struct of_device_id lpuart_dt_ids[] = { @@ -131,6 +158,10 @@ static struct of_device_id lpuart_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, lpuart_dt_ids); +/* Forward declare this for the dma callbacks*/ +static void lpuart_dma_tx_complete(void *arg); +static void lpuart_dma_rx_complete(void *arg); + static void lpuart_stop_tx(struct uart_port *port) { unsigned char temp; @@ -152,6 +183,210 @@ static void lpuart_enable_ms(struct uart_port *port) { } +static void lpuart_copy_rx_to_tty(struct lpuart_port *sport, + struct tty_port *tty, int count) +{ + int copied; + + sport->port.icount.rx += count; + + if (!tty) { + dev_err(sport->port.dev, "No tty port\n"); + return; + } + + dma_sync_single_for_cpu(sport->port.dev, sport->dma_rx_buf_bus, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); + copied = tty_insert_flip_string(tty, + ((unsigned char *)(sport->dma_rx_buf_virt)), count); + + if (copied != count) { + WARN_ON(1); + dev_err(sport->port.dev, "RxData copy to tty layer failed\n"); + } + + dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); +} + +static void lpuart_pio_tx(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + + while (!uart_circ_empty(xmit) && + readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size) { + writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS, + sport->port.membase + UARTCR5); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int lpuart_dma_tx(struct lpuart_port *sport, unsigned long count) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + dma_addr_t tx_bus_addr; + + dma_sync_single_for_device(sport->port.dev, sport->dma_tx_buf_bus, + UART_XMIT_SIZE, DMA_TO_DEVICE); + sport->dma_tx_bytes = count & ~(DMA_MAXBURST_MASK); + tx_bus_addr = sport->dma_tx_buf_bus + xmit->tail; + sport->dma_tx_desc = dmaengine_prep_slave_single(sport->dma_tx_chan, + tx_bus_addr, sport->dma_tx_bytes, + DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); + + if (!sport->dma_tx_desc) { + dev_err(sport->port.dev, "Not able to get desc for tx\n"); + return -EIO; + } + + sport->dma_tx_desc->callback = lpuart_dma_tx_complete; + sport->dma_tx_desc->callback_param = sport; + sport->dma_tx_in_progress = 1; + sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc); + dma_async_issue_pending(sport->dma_tx_chan); + + return 0; +} + +static void lpuart_prepare_tx(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long count = CIRC_CNT_TO_END(xmit->head, + xmit->tail, UART_XMIT_SIZE); + + if (!count) + return; + + if (count < DMA_MAXBURST) + writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_TDMAS, + sport->port.membase + UARTCR5); + else { + writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS, + sport->port.membase + UARTCR5); + lpuart_dma_tx(sport, count); + } +} + +static void lpuart_dma_tx_complete(void *arg) +{ + struct lpuart_port *sport = arg; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + + async_tx_ack(sport->dma_tx_desc); + + spin_lock_irqsave(&sport->port.lock, flags); + + xmit->tail = (xmit->tail + sport->dma_tx_bytes) & (UART_XMIT_SIZE - 1); + sport->dma_tx_in_progress = 0; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + lpuart_prepare_tx(sport); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int lpuart_dma_rx(struct lpuart_port *sport) +{ + dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); + sport->dma_rx_desc = dmaengine_prep_slave_single(sport->dma_rx_chan, + sport->dma_rx_buf_bus, FSL_UART_RX_DMA_BUFFER_SIZE, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + + if (!sport->dma_rx_desc) { + dev_err(sport->port.dev, "Not able to get desc for rx\n"); + return -EIO; + } + + sport->dma_rx_desc->callback = lpuart_dma_rx_complete; + sport->dma_rx_desc->callback_param = sport; + sport->dma_rx_in_progress = 1; + sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc); + dma_async_issue_pending(sport->dma_rx_chan); + + return 0; +} + +static void lpuart_dma_rx_complete(void *arg) +{ + struct lpuart_port *sport = arg; + struct tty_port *port = &sport->port.state->port; + unsigned long flags; + + async_tx_ack(sport->dma_rx_desc); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->dma_rx_in_progress = 0; + lpuart_copy_rx_to_tty(sport, port, FSL_UART_RX_DMA_BUFFER_SIZE); + tty_flip_buffer_push(port); + lpuart_dma_rx(sport); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static void lpuart_timer_func(unsigned long data) +{ + struct lpuart_port *sport = (struct lpuart_port *)data; + struct tty_port *port = &sport->port.state->port; + struct dma_tx_state state; + unsigned long flags; + unsigned char temp; + int count; + + del_timer(&sport->lpuart_timer); + dmaengine_pause(sport->dma_rx_chan); + dmaengine_tx_status(sport->dma_rx_chan, sport->dma_rx_cookie, &state); + dmaengine_terminate_all(sport->dma_rx_chan); + count = FSL_UART_RX_DMA_BUFFER_SIZE - state.residue; + async_tx_ack(sport->dma_rx_desc); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->dma_rx_in_progress = 0; + lpuart_copy_rx_to_tty(sport, port, count); + tty_flip_buffer_push(port); + temp = readb(sport->port.membase + UARTCR5); + writeb(temp & ~UARTCR5_RDMAS, sport->port.membase + UARTCR5); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static inline void lpuart_prepare_rx(struct lpuart_port *sport) +{ + unsigned long flags; + unsigned char temp; + + spin_lock_irqsave(&sport->port.lock, flags); + + init_timer(&sport->lpuart_timer); + sport->lpuart_timer.function = lpuart_timer_func; + sport->lpuart_timer.data = (unsigned long)sport; + sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout; + add_timer(&sport->lpuart_timer); + + lpuart_dma_rx(sport); + temp = readb(sport->port.membase + UARTCR5); + writeb(temp | UARTCR5_RDMAS, sport->port.membase + UARTCR5); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + static inline void lpuart_transmit_buffer(struct lpuart_port *sport) { struct circ_buf *xmit = &sport->port.state->xmit; @@ -172,14 +407,21 @@ static inline void lpuart_transmit_buffer(struct lpuart_port *sport) static void lpuart_start_tx(struct uart_port *port) { - struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct circ_buf *xmit = &sport->port.state->xmit; unsigned char temp; temp = readb(port->membase + UARTCR2); writeb(temp | UARTCR2_TIE, port->membase + UARTCR2); - if (readb(port->membase + UARTSR1) & UARTSR1_TDRE) - lpuart_transmit_buffer(sport); + if (sport->lpuart_dma_use) { + if (!uart_circ_empty(xmit) && !sport->dma_tx_in_progress) + lpuart_prepare_tx(sport); + } else { + if (readb(port->membase + UARTSR1) & UARTSR1_TDRE) + lpuart_transmit_buffer(sport); + } } static irqreturn_t lpuart_txint(int irq, void *dev_id) @@ -279,12 +521,19 @@ static irqreturn_t lpuart_int(int irq, void *dev_id) sts = readb(sport->port.membase + UARTSR1); - if (sts & UARTSR1_RDRF) - lpuart_rxint(irq, dev_id); - + if (sts & UARTSR1_RDRF) { + if (sport->lpuart_dma_use) + lpuart_prepare_rx(sport); + else + lpuart_rxint(irq, dev_id); + } if (sts & UARTSR1_TDRE && - !(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS)) - lpuart_txint(irq, dev_id); + !(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS)) { + if (sport->lpuart_dma_use) + lpuart_pio_tx(sport); + else + lpuart_txint(irq, dev_id); + } return IRQ_HANDLED; } @@ -366,13 +615,156 @@ static void lpuart_setup_watermark(struct lpuart_port *sport) writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH, sport->port.membase + UARTCFIFO); - writeb(2, sport->port.membase + UARTTWFIFO); + writeb(0, sport->port.membase + UARTTWFIFO); writeb(1, sport->port.membase + UARTRWFIFO); /* Restore cr2 */ writeb(cr2_saved, sport->port.membase + UARTCR2); } +static int lpuart_dma_tx_request(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct dma_chan *tx_chan; + struct dma_slave_config dma_tx_sconfig; + dma_addr_t dma_bus; + unsigned char *dma_buf; + int ret; + + tx_chan = dma_request_slave_channel(sport->port.dev, "tx"); + + if (!tx_chan) { + dev_err(sport->port.dev, "Dma tx channel request failed!\n"); + return -ENODEV; + } + + dma_bus = dma_map_single(tx_chan->device->dev, + sport->port.state->xmit.buf, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + if (dma_mapping_error(tx_chan->device->dev, dma_bus)) { + dev_err(sport->port.dev, "dma_map_single tx failed\n"); + dma_release_channel(tx_chan); + return -ENOMEM; + } + + dma_buf = sport->port.state->xmit.buf; + dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR; + dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_tx_sconfig.dst_maxburst = DMA_MAXBURST; + dma_tx_sconfig.direction = DMA_MEM_TO_DEV; + ret = dmaengine_slave_config(tx_chan, &dma_tx_sconfig); + + if (ret < 0) { + dev_err(sport->port.dev, + "Dma slave config failed, err = %d\n", ret); + dma_release_channel(tx_chan); + return ret; + } + + sport->dma_tx_chan = tx_chan; + sport->dma_tx_buf_virt = dma_buf; + sport->dma_tx_buf_bus = dma_bus; + sport->dma_tx_in_progress = 0; + + return 0; +} + +static int lpuart_dma_rx_request(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct dma_chan *rx_chan; + struct dma_slave_config dma_rx_sconfig; + dma_addr_t dma_bus; + unsigned char *dma_buf; + int ret; + + rx_chan = dma_request_slave_channel(sport->port.dev, "rx"); + + if (!rx_chan) { + dev_err(sport->port.dev, "Dma rx channel request failed!\n"); + return -ENODEV; + } + + dma_buf = devm_kzalloc(sport->port.dev, + FSL_UART_RX_DMA_BUFFER_SIZE, GFP_KERNEL); + + if (!dma_buf) { + dev_err(sport->port.dev, "Dma rx alloc failed\n"); + dma_release_channel(rx_chan); + return -ENOMEM; + } + + dma_bus = dma_map_single(rx_chan->device->dev, dma_buf, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); + + if (dma_mapping_error(rx_chan->device->dev, dma_bus)) { + dev_err(sport->port.dev, "dma_map_single rx failed\n"); + dma_release_channel(rx_chan); + return -ENOMEM; + } + + dma_rx_sconfig.src_addr = sport->port.mapbase + UARTDR; + dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_rx_sconfig.src_maxburst = 1; + dma_rx_sconfig.direction = DMA_DEV_TO_MEM; + ret = dmaengine_slave_config(rx_chan, &dma_rx_sconfig); + + if (ret < 0) { + dev_err(sport->port.dev, + "Dma slave config failed, err = %d\n", ret); + dma_release_channel(rx_chan); + return ret; + } + + sport->dma_rx_chan = rx_chan; + sport->dma_rx_buf_virt = dma_buf; + sport->dma_rx_buf_bus = dma_bus; + sport->dma_rx_in_progress = 0; + + sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) * + FSL_UART_RX_DMA_BUFFER_SIZE * 3 / + sport->rxfifo_size / 2; + + if (sport->dma_rx_timeout < msecs_to_jiffies(20)) + sport->dma_rx_timeout = msecs_to_jiffies(20); + + return 0; +} + +static void lpuart_dma_tx_free(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct dma_chan *dma_chan; + + dma_unmap_single(sport->port.dev, sport->dma_tx_buf_bus, + UART_XMIT_SIZE, DMA_TO_DEVICE); + dma_chan = sport->dma_tx_chan; + sport->dma_tx_chan = NULL; + sport->dma_tx_buf_bus = 0; + sport->dma_tx_buf_virt = NULL; + dma_release_channel(dma_chan); +} + +static void lpuart_dma_rx_free(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct dma_chan *dma_chan; + + dma_unmap_single(sport->port.dev, sport->dma_rx_buf_bus, + FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); + + dma_chan = sport->dma_rx_chan; + sport->dma_rx_chan = NULL; + sport->dma_rx_buf_bus = 0; + sport->dma_rx_buf_virt = NULL; + dma_release_channel(dma_chan); +} + static int lpuart_startup(struct uart_port *port) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); @@ -380,6 +772,15 @@ static int lpuart_startup(struct uart_port *port) unsigned long flags; unsigned char temp; + /*whether use dma support by dma request results*/ + if (lpuart_dma_tx_request(port) || lpuart_dma_rx_request(port)) { + sport->lpuart_dma_use = false; + } else { + sport->lpuart_dma_use = true; + temp = readb(port->membase + UARTCR5); + writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5); + } + ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0, DRIVER_NAME, sport); if (ret) @@ -414,6 +815,11 @@ static void lpuart_shutdown(struct uart_port *port) spin_unlock_irqrestore(&port->lock, flags); devm_free_irq(port->dev, port->irq, sport); + + if (sport->lpuart_dma_use) { + lpuart_dma_tx_free(port); + lpuart_dma_rx_free(port); + } } static void diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index d799140e53b6..3b6c1a2e25de 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -496,8 +496,7 @@ static void dma_tx_callback(void *data) dev_dbg(sport->port.dev, "we finish the TX DMA.\n"); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); + uart_write_wakeup(&sport->port); if (waitqueue_active(&sport->dma_wait)) { wake_up(&sport->dma_wait); @@ -1117,25 +1116,25 @@ static int imx_startup(struct uart_port *port) */ if (sport->txirq > 0) { retval = request_irq(sport->rxirq, imx_rxint, 0, - DRIVER_NAME, sport); + dev_name(port->dev), sport); if (retval) goto error_out1; retval = request_irq(sport->txirq, imx_txint, 0, - DRIVER_NAME, sport); + dev_name(port->dev), sport); if (retval) goto error_out2; /* do not use RTS IRQ on IrDA */ if (!USE_IRDA(sport)) { retval = request_irq(sport->rtsirq, imx_rtsint, 0, - DRIVER_NAME, sport); + dev_name(port->dev), sport); if (retval) goto error_out3; } } else { retval = request_irq(sport->port.irq, imx_int, 0, - DRIVER_NAME, sport); + dev_name(port->dev), sport); if (retval) { free_irq(sport->port.irq, sport); goto error_out1; @@ -1470,44 +1469,13 @@ static const char *imx_type(struct uart_port *port) } /* - * Release the memory region(s) being used by 'port'. - */ -static void imx_release_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *mmres; - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mmres->start, resource_size(mmres)); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int imx_request_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *mmres; - void *ret; - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mmres) - return -ENODEV; - - ret = request_mem_region(mmres->start, resource_size(mmres), "imx-uart"); - - return ret ? 0 : -EBUSY; -} - -/* * Configure/autoconfigure the port. */ static void imx_config_port(struct uart_port *port, int flags) { struct imx_port *sport = (struct imx_port *)port; - if (flags & UART_CONFIG_TYPE && - imx_request_port(&sport->port) == 0) + if (flags & UART_CONFIG_TYPE) sport->port.type = PORT_IMX; } @@ -1617,8 +1585,6 @@ static struct uart_ops imx_pops = { .flush_buffer = imx_flush_buffer, .set_termios = imx_set_termios, .type = imx_type, - .release_port = imx_release_port, - .request_port = imx_request_port, .config_port = imx_config_port, .verify_port = imx_verify_port, #if defined(CONFIG_CONSOLE_POLL) @@ -1935,7 +1901,6 @@ static void serial_imx_probe_pdata(struct imx_port *sport, static int serial_imx_probe(struct platform_device *pdev) { struct imx_port *sport; - struct imxuart_platform_data *pdata; void __iomem *base; int ret = 0; struct resource *res; @@ -1951,12 +1916,9 @@ static int serial_imx_probe(struct platform_device *pdev) return ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - base = devm_ioremap(&pdev->dev, res->start, PAGE_SIZE); - if (!base) - return -ENOMEM; + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); sport->port.dev = &pdev->dev; sport->port.mapbase = res->start; @@ -1992,38 +1954,16 @@ static int serial_imx_probe(struct platform_device *pdev) imx_ports[sport->port.line] = sport; - pdata = dev_get_platdata(&pdev->dev); - if (pdata && pdata->init) { - ret = pdata->init(pdev); - if (ret) - return ret; - } - - ret = uart_add_one_port(&imx_reg, &sport->port); - if (ret) - goto deinit; platform_set_drvdata(pdev, sport); - return 0; -deinit: - if (pdata && pdata->exit) - pdata->exit(pdev); - return ret; + return uart_add_one_port(&imx_reg, &sport->port); } static int serial_imx_remove(struct platform_device *pdev) { - struct imxuart_platform_data *pdata; struct imx_port *sport = platform_get_drvdata(pdev); - pdata = dev_get_platdata(&pdev->dev); - - uart_remove_one_port(&imx_reg, &sport->port); - - if (pdata && pdata->exit) - pdata->exit(pdev); - - return 0; + return uart_remove_one_port(&imx_reg, &sport->port); } static struct platform_driver serial_imx_driver = { diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 8d71e4047bb3..2a99d0c61b9e 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1,7 +1,7 @@ /* * Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver * - * Copyright (C) 2012-2013 Alexander Shiyan <shc_work@mail.ru> + * Copyright (C) 2012-2014 Alexander Shiyan <shc_work@mail.ru> * * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org> * Based on max3110.c, by Feng Tang <feng.tang@intel.com> @@ -13,19 +13,21 @@ * (at your option) any later version. */ -#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> -#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> #include <linux/serial_core.h> #include <linux/serial.h> #include <linux/tty.h> #include <linux/tty_flip.h> -#include <linux/regmap.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> - -#include <linux/platform_data/max310x.h> +#include <linux/uaccess.h> #define MAX310X_NAME "max310x" #define MAX310X_MAJOR 204 @@ -161,10 +163,6 @@ /* IRDA register bits */ #define MAX310X_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ #define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ -#define MAX310X_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ -#define MAX310X_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ -#define MAX310X_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ -#define MAX310X_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ /* Flow control trigger level register masks */ #define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ @@ -220,26 +218,6 @@ * XOFF2 */ -/* GPIO configuration register bits */ -#define MAX310X_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ -#define MAX310X_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ -#define MAX310X_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ -#define MAX310X_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ -#define MAX310X_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ -#define MAX310X_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ -#define MAX310X_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ -#define MAX310X_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ - -/* GPIO DATA register bits */ -#define MAX310X_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ -#define MAX310X_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ -#define MAX310X_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ -#define MAX310X_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ -#define MAX310X_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ -#define MAX310X_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ -#define MAX310X_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ -#define MAX310X_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ - /* PLL configuration register masks */ #define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */ #define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */ @@ -283,16 +261,15 @@ struct max310x_devtype { struct max310x_one { struct uart_port port; struct work_struct tx_work; + struct work_struct md_work; }; struct max310x_port { struct uart_driver uart; struct max310x_devtype *devtype; struct regmap *regmap; - struct regmap_config regcfg; struct mutex mutex; - struct max310x_pdata *pdata; - int gpio_used; + struct clk *clk; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; #endif @@ -504,25 +481,33 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg) return false; } -static void max310x_set_baud(struct uart_port *port, int baud) +static int max310x_set_baud(struct uart_port *port, int baud) { - unsigned int mode = 0, div = port->uartclk / baud; + unsigned int mode = 0, clk = port->uartclk, div = clk / baud; - if (!(div / 16)) { + /* Check for minimal value for divider */ + if (div < 16) + div = 16; + + if (clk % baud && (div / 16) < 0x8000) { /* Mode x2 */ mode = MAX310X_BRGCFG_2XMODE_BIT; - div = (port->uartclk * 2) / baud; - } - - if (!(div / 16)) { - /* Mode x4 */ - mode = MAX310X_BRGCFG_4XMODE_BIT; - div = (port->uartclk * 4) / baud; + clk = port->uartclk * 2; + div = clk / baud; + + if (clk % baud && (div / 16) < 0x8000) { + /* Mode x4 */ + mode = MAX310X_BRGCFG_4XMODE_BIT; + clk = port->uartclk * 4; + div = clk / baud; + } } max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8); max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16); max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode); + + return DIV_ROUND_CLOSEST(clk, div); } static int max310x_update_best_err(unsigned long f, long *besterr) @@ -538,18 +523,19 @@ static int max310x_update_best_err(unsigned long f, long *besterr) return 1; } -static int max310x_set_ref_clk(struct max310x_port *s) +static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq, + bool xtal) { unsigned int div, clksrc, pllcfg = 0; long besterr = -1; - unsigned long fdiv, fmul, bestfreq = s->pdata->frequency; + unsigned long fdiv, fmul, bestfreq = freq; /* First, update error without PLL */ - max310x_update_best_err(s->pdata->frequency, &besterr); + max310x_update_best_err(freq, &besterr); /* Try all possible PLL dividers */ for (div = 1; (div <= 63) && besterr; div++) { - fdiv = DIV_ROUND_CLOSEST(s->pdata->frequency, div); + fdiv = DIV_ROUND_CLOSEST(freq, div); /* Try multiplier 6 */ fmul = fdiv * 6; @@ -582,10 +568,7 @@ static int max310x_set_ref_clk(struct max310x_port *s) } /* Configure clock source */ - if (s->pdata->driver_flags & MAX310X_EXT_CLK) - clksrc = MAX310X_CLKSRC_EXTCLK_BIT; - else - clksrc = MAX310X_CLKSRC_CRYST_BIT; + clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT; /* Configure PLL */ if (pllcfg) { @@ -597,7 +580,7 @@ static int max310x_set_ref_clk(struct max310x_port *s) regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc); /* Wait for crystal */ - if (pllcfg && !(s->pdata->driver_flags & MAX310X_EXT_CLK)) + if (pllcfg && xtal) msleep(10); return (int)bestfreq; @@ -782,11 +765,21 @@ static unsigned int max310x_get_mctrl(struct uart_port *port) return TIOCM_DSR | TIOCM_CAR; } +static void max310x_md_proc(struct work_struct *ws) +{ + struct max310x_one *one = container_of(ws, struct max310x_one, md_work); + + max310x_port_update(&one->port, MAX310X_MODE2_REG, + MAX310X_MODE2_LOOPBACK_BIT, + (one->port.mctrl & TIOCM_LOOP) ? + MAX310X_MODE2_LOOPBACK_BIT : 0); +} + static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* DCD and DSR are not wired and CTS/RTS is hadnled automatically - * so do nothing - */ + struct max310x_one *one = container_of(port, struct max310x_one, port); + + schedule_work(&one->md_work); } static void max310x_break_ctl(struct uart_port *port, int break_state) @@ -875,40 +868,76 @@ static void max310x_set_termios(struct uart_port *port, port->uartclk / 4); /* Setup baudrate generator */ - max310x_set_baud(port, baud); + baud = max310x_set_baud(port, baud); /* Update timeout according to new baud rate */ uart_update_timeout(port, termios->c_cflag, baud); } +static int max310x_ioctl(struct uart_port *port, unsigned int cmd, + unsigned long arg) +{ +#if defined(TIOCSRS485) && defined(TIOCGRS485) + struct serial_rs485 rs485; + unsigned int val; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485, (void __user *)arg, sizeof(rs485))) + return -EFAULT; + if (rs485.delay_rts_before_send > 0x0f || + rs485.delay_rts_after_send > 0x0f) + return -ERANGE; + val = (rs485.delay_rts_before_send << 4) | + rs485.delay_rts_after_send; + max310x_port_write(port, MAX310X_HDPIXDELAY_REG, val); + if (rs485.flags & SER_RS485_ENABLED) { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, + MAX310X_MODE1_TRNSCVCTRL_BIT); + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_ECHOSUPR_BIT, + MAX310X_MODE2_ECHOSUPR_BIT); + } else { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, 0); + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_ECHOSUPR_BIT, 0); + } + return 0; + case TIOCGRS485: + memset(&rs485, 0, sizeof(rs485)); + val = max310x_port_read(port, MAX310X_MODE1_REG); + rs485.flags = (val & MAX310X_MODE1_TRNSCVCTRL_BIT) ? + SER_RS485_ENABLED : 0; + rs485.flags |= SER_RS485_RTS_ON_SEND; + val = max310x_port_read(port, MAX310X_HDPIXDELAY_REG); + rs485.delay_rts_before_send = val >> 4; + rs485.delay_rts_after_send = val & 0x0f; + if (copy_to_user((void __user *)arg, &rs485, sizeof(rs485))) + return -EFAULT; + return 0; + default: + break; + } +#endif + + return -ENOIOCTLCMD; +} + static int max310x_startup(struct uart_port *port) { - unsigned int val, line = port->line; struct max310x_port *s = dev_get_drvdata(port->dev); + unsigned int val; s->devtype->power(port, 1); - /* Configure baud rate, 9600 as default */ - max310x_set_baud(port, 9600); - - /* Configure LCR register, 8N1 mode by default */ - max310x_port_write(port, MAX310X_LCR_REG, MAX310X_LCR_WORD_LEN_8); - /* Configure MODE1 register */ max310x_port_update(port, MAX310X_MODE1_REG, - MAX310X_MODE1_TRNSCVCTRL_BIT, - (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL) - ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0); - - /* Configure MODE2 register */ - val = MAX310X_MODE2_RXEMPTINV_BIT; - if (s->pdata->uart_flags[line] & MAX310X_LOOPBACK) - val |= MAX310X_MODE2_LOOPBACK_BIT; - if (s->pdata->uart_flags[line] & MAX310X_ECHO_SUPRESS) - val |= MAX310X_MODE2_ECHOSUPR_BIT; - - /* Reset FIFOs */ - val |= MAX310X_MODE2_FIFORST_BIT; + MAX310X_MODE1_TRNSCVCTRL_BIT, 0); + + /* Configure MODE2 register & Reset FIFOs*/ + val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT; max310x_port_write(port, MAX310X_MODE2_REG, val); max310x_port_update(port, MAX310X_MODE2_REG, MAX310X_MODE2_FIFORST_BIT, 0); @@ -989,6 +1018,7 @@ static const struct uart_ops max310x_ops = { .release_port = max310x_null_void, .config_port = max310x_config_port, .verify_port = max310x_verify_port, + .ioctl = max310x_ioctl, }; static int __maybe_unused max310x_suspend(struct device *dev) @@ -1017,6 +1047,8 @@ static int __maybe_unused max310x_resume(struct device *dev) return 0; } +static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); + #ifdef CONFIG_GPIOLIB static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset) { @@ -1063,23 +1095,16 @@ static int max310x_gpio_direction_output(struct gpio_chip *chip, } #endif -static int max310x_probe(struct device *dev, int is_spi, - struct max310x_devtype *devtype, int irq) +static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, + struct regmap *regmap, int irq, unsigned long flags) { + int i, ret, fmin, fmax, freq, uartclk; + struct clk *clk_osc, *clk_xtal; struct max310x_port *s; - struct max310x_pdata *pdata = dev_get_platdata(dev); - int i, ret, uartclk; - - /* Check for IRQ */ - if (irq <= 0) { - dev_err(dev, "No IRQ specified\n"); - return -ENOTSUPP; - } + bool xtal = false; - if (!pdata) { - dev_err(dev, "No platform data supplied\n"); - return -EINVAL; - } + if (IS_ERR(regmap)) + return PTR_ERR(regmap); /* Alloc port structure */ s = devm_kzalloc(dev, sizeof(*s) + @@ -1089,52 +1114,44 @@ static int max310x_probe(struct device *dev, int is_spi, return -ENOMEM; } - /* Check input frequency */ - if ((pdata->driver_flags & MAX310X_EXT_CLK) && - ((pdata->frequency < 500000) || (pdata->frequency > 35000000))) - goto err_freq; - /* Check frequency for quartz */ - if (!(pdata->driver_flags & MAX310X_EXT_CLK) && - ((pdata->frequency < 1000000) || (pdata->frequency > 4000000))) - goto err_freq; - - s->pdata = pdata; - s->devtype = devtype; - dev_set_drvdata(dev, s); - - mutex_init(&s->mutex); + clk_osc = devm_clk_get(dev, "osc"); + clk_xtal = devm_clk_get(dev, "xtal"); + if (!IS_ERR(clk_osc)) { + s->clk = clk_osc; + fmin = 500000; + fmax = 35000000; + } else if (!IS_ERR(clk_xtal)) { + s->clk = clk_xtal; + fmin = 1000000; + fmax = 4000000; + xtal = true; + } else if (PTR_ERR(clk_osc) == -EPROBE_DEFER || + PTR_ERR(clk_xtal) == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else { + dev_err(dev, "Cannot get clock\n"); + return -EINVAL; + } - /* Setup regmap */ - s->regcfg.reg_bits = 8; - s->regcfg.val_bits = 8; - s->regcfg.read_flag_mask = 0x00; - s->regcfg.write_flag_mask = 0x80; - s->regcfg.cache_type = REGCACHE_RBTREE; - s->regcfg.writeable_reg = max310x_reg_writeable; - s->regcfg.volatile_reg = max310x_reg_volatile; - s->regcfg.precious_reg = max310x_reg_precious; - s->regcfg.max_register = devtype->nr * 0x20 - 1; - - if (IS_ENABLED(CONFIG_SPI_MASTER) && is_spi) { - struct spi_device *spi = to_spi_device(dev); - - s->regmap = devm_regmap_init_spi(spi, &s->regcfg); - } else - return -ENOTSUPP; + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; - if (IS_ERR(s->regmap)) { - dev_err(dev, "Failed to initialize register map\n"); - return PTR_ERR(s->regmap); + freq = clk_get_rate(s->clk); + /* Check frequency limits */ + if (freq < fmin || freq > fmax) { + ret = -ERANGE; + goto out_clk; } - /* Board specific configure */ - if (s->pdata->init) - s->pdata->init(); + s->regmap = regmap; + s->devtype = devtype; + dev_set_drvdata(dev, s); /* Check device to ensure we are talking to what we expect */ ret = devtype->detect(dev); if (ret) - return ret; + goto out_clk; for (i = 0; i < devtype->nr; i++) { unsigned int offs = i << 5; @@ -1156,7 +1173,7 @@ static int max310x_probe(struct device *dev, int is_spi, MAX310X_MODE1_AUTOSLEEP_BIT); } - uartclk = max310x_set_ref_clk(s); + uartclk = max310x_set_ref_clk(s, freq, xtal); dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); /* Register UART driver */ @@ -1168,9 +1185,28 @@ static int max310x_probe(struct device *dev, int is_spi, ret = uart_register_driver(&s->uart); if (ret) { dev_err(dev, "Registering UART driver failed\n"); - return ret; + goto out_clk; } +#ifdef CONFIG_GPIOLIB + /* Setup GPIO cotroller */ + s->gpio.owner = THIS_MODULE; + s->gpio.dev = dev; + s->gpio.label = dev_name(dev); + s->gpio.direction_input = max310x_gpio_direction_input; + s->gpio.get = max310x_gpio_get; + s->gpio.direction_output= max310x_gpio_direction_output; + s->gpio.set = max310x_gpio_set; + s->gpio.base = -1; + s->gpio.ngpio = devtype->nr * 4; + s->gpio.can_sleep = 1; + ret = gpiochip_add(&s->gpio); + if (ret) + goto out_uart; +#endif + + mutex_init(&s->mutex); + for (i = 0; i < devtype->nr; i++) { /* Initialize port data */ s->p[i].port.line = i; @@ -1178,8 +1214,7 @@ static int max310x_probe(struct device *dev, int is_spi, s->p[i].port.irq = irq; s->p[i].port.type = PORT_MAX310X; s->p[i].port.fifosize = MAX310X_FIFO_SIZE; - s->p[i].port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE | - UPF_LOW_LATENCY; + s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; s->p[i].port.iotype = UPIO_PORT; s->p[i].port.iobase = i * 0x20; s->p[i].port.membase = (void __iomem *)~0; @@ -1195,48 +1230,35 @@ static int max310x_probe(struct device *dev, int is_spi, MAX310X_MODE1_IRQSEL_BIT); /* Initialize queue for start TX */ INIT_WORK(&s->p[i].tx_work, max310x_wq_proc); + /* Initialize queue for changing mode */ + INIT_WORK(&s->p[i].md_work, max310x_md_proc); /* Register port */ uart_add_one_port(&s->uart, &s->p[i].port); /* Go to suspend mode */ devtype->power(&s->p[i].port, 0); } -#ifdef CONFIG_GPIOLIB - /* Setup GPIO cotroller */ - if (s->pdata->gpio_base) { - s->gpio.owner = THIS_MODULE; - s->gpio.dev = dev; - s->gpio.label = dev_name(dev); - s->gpio.direction_input = max310x_gpio_direction_input; - s->gpio.get = max310x_gpio_get; - s->gpio.direction_output= max310x_gpio_direction_output; - s->gpio.set = max310x_gpio_set; - s->gpio.base = s->pdata->gpio_base; - s->gpio.ngpio = devtype->nr * 4; - s->gpio.can_sleep = 1; - if (!gpiochip_add(&s->gpio)) - s->gpio_used = 1; - } else - dev_info(dev, "GPIO support not enabled\n"); -#endif - /* Setup interrupt */ ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - dev_name(dev), s); - if (ret) { - dev_err(dev, "Unable to reguest IRQ %i\n", irq); + IRQF_ONESHOT | flags, dev_name(dev), s); + if (!ret) + return 0; + + dev_err(dev, "Unable to reguest IRQ %i\n", irq); + + mutex_destroy(&s->mutex); + #ifdef CONFIG_GPIOLIB - if (s->gpio_used) - WARN_ON(gpiochip_remove(&s->gpio)); + WARN_ON(gpiochip_remove(&s->gpio)); + +out_uart: #endif - } + uart_unregister_driver(&s->uart); - return ret; +out_clk: + clk_disable_unprepare(s->clk); -err_freq: - dev_err(dev, "Frequency parameter incorrect\n"); - return -EINVAL; + return ret; } static int max310x_remove(struct device *dev) @@ -1244,30 +1266,51 @@ static int max310x_remove(struct device *dev) struct max310x_port *s = dev_get_drvdata(dev); int i, ret = 0; +#ifdef CONFIG_GPIOLIB + ret = gpiochip_remove(&s->gpio); + if (ret) + return ret; +#endif + for (i = 0; i < s->uart.nr; i++) { cancel_work_sync(&s->p[i].tx_work); + cancel_work_sync(&s->p[i].md_work); uart_remove_one_port(&s->uart, &s->p[i].port); s->devtype->power(&s->p[i].port, 0); } + mutex_destroy(&s->mutex); uart_unregister_driver(&s->uart); - -#ifdef CONFIG_GPIOLIB - if (s->gpio_used) - ret = gpiochip_remove(&s->gpio); -#endif - - if (s->pdata->exit) - s->pdata->exit(); + clk_disable_unprepare(s->clk); return ret; } +static const struct of_device_id __maybe_unused max310x_dt_ids[] = { + { .compatible = "maxim,max3107", .data = &max3107_devtype, }, + { .compatible = "maxim,max3108", .data = &max3108_devtype, }, + { .compatible = "maxim,max3109", .data = &max3109_devtype, }, + { .compatible = "maxim,max14830", .data = &max14830_devtype }, + { } +}; +MODULE_DEVICE_TABLE(of, max310x_dt_ids); + +static struct regmap_config regcfg = { + .reg_bits = 8, + .val_bits = 8, + .write_flag_mask = 0x80, + .cache_type = REGCACHE_RBTREE, + .writeable_reg = max310x_reg_writeable, + .volatile_reg = max310x_reg_volatile, + .precious_reg = max310x_reg_precious, +}; + #ifdef CONFIG_SPI_MASTER static int max310x_spi_probe(struct spi_device *spi) { - struct max310x_devtype *devtype = - (struct max310x_devtype *)spi_get_device_id(spi)->driver_data; + struct max310x_devtype *devtype; + unsigned long flags = 0; + struct regmap *regmap; int ret; /* Setup SPI bus */ @@ -1275,12 +1318,25 @@ static int max310x_spi_probe(struct spi_device *spi) spi->mode = spi->mode ? : SPI_MODE_0; spi->max_speed_hz = spi->max_speed_hz ? : 26000000; ret = spi_setup(spi); - if (ret) { - dev_err(&spi->dev, "SPI setup failed\n"); + if (ret) return ret; + + if (spi->dev.of_node) { + const struct of_device_id *of_id = + of_match_device(max310x_dt_ids, &spi->dev); + + devtype = (struct max310x_devtype *)of_id->data; + } else { + const struct spi_device_id *id_entry = spi_get_device_id(spi); + + devtype = (struct max310x_devtype *)id_entry->driver_data; + flags = IRQF_TRIGGER_FALLING; } - return max310x_probe(&spi->dev, 1, devtype, spi->irq); + regcfg.max_register = devtype->nr * 0x20 - 1; + regmap = devm_regmap_init_spi(spi, ®cfg); + + return max310x_probe(&spi->dev, devtype, regmap, spi->irq, flags); } static int max310x_spi_remove(struct spi_device *spi) @@ -1288,8 +1344,6 @@ static int max310x_spi_remove(struct spi_device *spi) return max310x_remove(&spi->dev); } -static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); - static const struct spi_device_id max310x_id_table[] = { { "max3107", (kernel_ulong_t)&max3107_devtype, }, { "max3108", (kernel_ulong_t)&max3108_devtype, }, @@ -1301,9 +1355,10 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table); static struct spi_driver max310x_uart_driver = { .driver = { - .name = MAX310X_NAME, - .owner = THIS_MODULE, - .pm = &max310x_pm_ops, + .name = MAX310X_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(max310x_dt_ids), + .pm = &max310x_pm_ops, }, .probe = max310x_spi_probe, .remove = max310x_spi_remove, diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index b5d779cd3c2b..053b98eb46c8 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -39,6 +39,13 @@ #include "msm_serial.h" +enum { + UARTDM_1P1 = 1, + UARTDM_1P2, + UARTDM_1P3, + UARTDM_1P4, +}; + struct msm_port { struct uart_port uart; char name[16]; @@ -309,6 +316,8 @@ static unsigned int msm_get_mctrl(struct uart_port *port) static void msm_reset(struct uart_port *port) { + struct msm_port *msm_port = UART_TO_MSM(port); + /* reset everything */ msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); @@ -316,6 +325,10 @@ static void msm_reset(struct uart_port *port) msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); + + /* Disable DM modes */ + if (msm_port->is_uartdm) + msm_write(port, 0, UARTDM_DMEN); } static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) @@ -711,6 +724,117 @@ static void msm_power(struct uart_port *port, unsigned int state, } } +#ifdef CONFIG_CONSOLE_POLL +static int msm_poll_init(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + /* Enable single character mode on RX FIFO */ + if (msm_port->is_uartdm >= UARTDM_1P4) + msm_write(port, UARTDM_DMEN_RX_SC_ENABLE, UARTDM_DMEN); + + return 0; +} + +static int msm_poll_get_char_single(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF; + + if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) + return NO_POLL_CHAR; + else + return msm_read(port, rf_reg) & 0xff; +} + +static int msm_poll_get_char_dm_1p3(struct uart_port *port) +{ + int c; + static u32 slop; + static int count; + unsigned char *sp = (unsigned char *)&slop; + + /* Check if a previous read had more than one char */ + if (count) { + c = sp[sizeof(slop) - count]; + count--; + /* Or if FIFO is empty */ + } else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) { + /* + * If RX packing buffer has less than a word, force stale to + * push contents into RX FIFO + */ + count = msm_read(port, UARTDM_RXFS); + count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK; + if (count) { + msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR); + slop = msm_read(port, UARTDM_RF); + c = sp[0]; + count--; + } else { + c = NO_POLL_CHAR; + } + /* FIFO has a word */ + } else { + slop = msm_read(port, UARTDM_RF); + c = sp[0]; + count = sizeof(slop) - 1; + } + + return c; +} + +static int msm_poll_get_char(struct uart_port *port) +{ + u32 imr; + int c; + struct msm_port *msm_port = UART_TO_MSM(port); + + /* Disable all interrupts */ + imr = msm_read(port, UART_IMR); + msm_write(port, 0, UART_IMR); + + if (msm_port->is_uartdm == UARTDM_1P3) + c = msm_poll_get_char_dm_1p3(port); + else + c = msm_poll_get_char_single(port); + + /* Enable interrupts */ + msm_write(port, imr, UART_IMR); + + return c; +} + +static void msm_poll_put_char(struct uart_port *port, unsigned char c) +{ + u32 imr; + struct msm_port *msm_port = UART_TO_MSM(port); + + /* Disable all interrupts */ + imr = msm_read(port, UART_IMR); + msm_write(port, 0, UART_IMR); + + if (msm_port->is_uartdm) + reset_dm_count(port, 1); + + /* Wait until FIFO is empty */ + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + cpu_relax(); + + /* Write a character */ + msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF); + + /* Wait until FIFO is empty */ + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + cpu_relax(); + + /* Enable interrupts */ + msm_write(port, imr, UART_IMR); + + return; +} +#endif + static struct uart_ops msm_uart_pops = { .tx_empty = msm_tx_empty, .set_mctrl = msm_set_mctrl, @@ -729,6 +853,11 @@ static struct uart_ops msm_uart_pops = { .config_port = msm_config_port, .verify_port = msm_verify_port, .pm = msm_power, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = msm_poll_init, + .poll_get_char = msm_poll_get_char, + .poll_put_char = msm_poll_put_char, +#endif }; static struct msm_port msm_uart_ports[] = { @@ -900,7 +1029,10 @@ static struct uart_driver msm_uart_driver = { static atomic_t msm_uart_next_id = ATOMIC_INIT(0); static const struct of_device_id msm_uartdm_table[] = { - { .compatible = "qcom,msm-uartdm" }, + { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 }, + { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 }, + { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 }, + { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 }, { } }; @@ -909,6 +1041,7 @@ static int __init msm_serial_probe(struct platform_device *pdev) struct msm_port *msm_port; struct resource *resource; struct uart_port *port; + const struct of_device_id *id; int irq; if (pdev->id == -1) @@ -923,8 +1056,9 @@ static int __init msm_serial_probe(struct platform_device *pdev) port->dev = &pdev->dev; msm_port = UART_TO_MSM(port); - if (of_match_device(msm_uartdm_table, &pdev->dev)) - msm_port->is_uartdm = 1; + id = of_match_device(msm_uartdm_table, &pdev->dev); + if (id) + msm_port->is_uartdm = (unsigned long)id->data; else msm_port->is_uartdm = 0; diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h index 469fda50ac63..1e9b68b6f9eb 100644 --- a/drivers/tty/serial/msm_serial.h +++ b/drivers/tty/serial/msm_serial.h @@ -59,6 +59,7 @@ #define UART_CR_CMD_RESET_RFR (14 << 4) #define UART_CR_CMD_PROTECTION_EN (16 << 4) #define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4) +#define UART_CR_CMD_FORCE_STALE (4 << 8) #define UART_CR_CMD_RESET_TX_READY (3 << 8) #define UART_CR_TX_DISABLE (1 << 3) #define UART_CR_TX_ENABLE (1 << 2) @@ -113,6 +114,14 @@ #define GSBI_PROTOCOL_UART 0x40 #define GSBI_PROTOCOL_IDLE 0x0 +#define UARTDM_RXFS 0x50 +#define UARTDM_RXFS_BUF_SHIFT 0x7 +#define UARTDM_RXFS_BUF_MASK 0x7 + +#define UARTDM_DMEN 0x3C +#define UARTDM_DMEN_RX_SC_ENABLE BIT(5) +#define UARTDM_DMEN_TX_SC_ENABLE BIT(4) + #define UARTDM_DMRX 0x34 #define UARTDM_NCF_TX 0x40 #define UARTDM_RX_TOTAL_SNAP 0x38 diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 77f035158d6c..dd8b1a5458ff 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -342,7 +342,14 @@ static void serial_omap_stop_tx(struct uart_port *port) if ((up->rs485.flags & SER_RS485_ENABLED) && !(up->rs485.flags & SER_RS485_RX_DURING_TX)) { - up->ier = UART_IER_RLSI | UART_IER_RDI; + /* + * Empty the RX FIFO, we are not interested in anything + * received during the half-duplex transmission. + */ + serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_RCVR); + /* Re-enable RX interrupts */ + up->ier |= UART_IER_RLSI | UART_IER_RDI; + up->port.read_status_mask |= UART_LSR_DR; serial_out(up, UART_IER, up->ier); } @@ -355,7 +362,7 @@ static void serial_omap_stop_rx(struct uart_port *port) struct uart_omap_port *up = to_uart_omap_port(port); pm_runtime_get_sync(up->dev); - up->ier &= ~UART_IER_RLSI; + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); pm_runtime_mark_last_busy(up->dev); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 8fa1134e0051..0931b3fe9edf 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1762,7 +1762,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, int fifosize; int port_type; struct pch_uart_driver_data *board; +#ifdef CONFIG_DEBUG_FS char name[32]; /* for debugfs file name */ +#endif board = &drv_dat[id->driver_data]; port_type = board->port_type; diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 9cd706df3b33..23f459600738 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1282,6 +1282,14 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) if (ret < 0) goto probe_err; + if (!s3c24xx_uart_drv.state) { + ret = uart_register_driver(&s3c24xx_uart_drv); + if (ret < 0) { + pr_err("Failed to register Samsung UART driver\n"); + return ret; + } + } + dbg("%s: adding port\n", __func__); uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); platform_set_drvdata(pdev, &ourport->port); @@ -1321,6 +1329,8 @@ static int s3c24xx_serial_remove(struct platform_device *dev) uart_remove_one_port(&s3c24xx_uart_drv, port); } + uart_unregister_driver(&s3c24xx_uart_drv); + return 0; } @@ -1820,35 +1830,7 @@ static struct platform_driver samsung_serial_driver = { }, }; -/* module initialisation code */ - -static int __init s3c24xx_serial_modinit(void) -{ - int ret; - - ret = uart_register_driver(&s3c24xx_uart_drv); - if (ret < 0) { - pr_err("Failed to register Samsung UART driver\n"); - return ret; - } - - ret = platform_driver_register(&samsung_serial_driver); - if (ret < 0) { - pr_err("Failed to register platform driver\n"); - uart_unregister_driver(&s3c24xx_uart_drv); - } - - return ret; -} - -static void __exit s3c24xx_serial_modexit(void) -{ - platform_driver_unregister(&samsung_serial_driver); - uart_unregister_driver(&s3c24xx_uart_drv); -} - -module_init(s3c24xx_serial_modinit); -module_exit(s3c24xx_serial_modexit); +module_platform_driver(samsung_serial_driver); MODULE_ALIAS("platform:samsung-uart"); MODULE_DESCRIPTION("Samsung SoC Serial port driver"); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index ece2049bd270..2cf5649a6dc0 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1319,9 +1319,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) uport = state->uart_port; port = &state->port; - pr_debug("uart_close(%d) called\n", uport->line); + pr_debug("uart_close(%d) called\n", uport ? uport->line : -1); - if (tty_port_close_start(port, tty, filp) == 0) + if (!port->count || tty_port_close_start(port, tty, filp) == 0) return; /* @@ -1762,7 +1762,7 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) } /** - * uart_parse_options - Parse serial port baud/parity/bits/flow contro. + * uart_parse_options - Parse serial port baud/parity/bits/flow control. * @options: pointer to option string * @baud: pointer to an 'int' variable for the baud rate. * @parity: pointer to an 'int' variable for the parity. @@ -2609,7 +2609,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) /* * Register the port whether it's detected or not. This allows - * setserial to be used to alter this ports parameters. + * setserial to be used to alter this port's parameters. */ tty_dev = tty_port_register_device_attr(port, drv->tty_driver, uport->line, uport->dev, port, tty_dev_attr_groups); @@ -2645,6 +2645,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) { struct uart_state *state = drv->state + uport->line; struct tty_port *port = &state->port; + struct tty_struct *tty; int ret = 0; BUG_ON(in_interrupt()); @@ -2673,8 +2674,17 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) */ tty_unregister_device(drv->tty_driver, uport->line); - if (port->tty) + tty = tty_port_tty_get(port); + if (tty) { tty_vhangup(port->tty); + tty_kref_put(tty); + } + + /* + * If the port is used as a console, unregister it + */ + if (uart_console(uport)) + unregister_console(uport->cons); /* * Free the port IO and memory resources, if any. diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 7e0b62602632..88236da0ddf7 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -428,7 +428,7 @@ static int sci_probe_regmap(struct plat_sci_port *cfg) cfg->regtype = SCIx_HSCIF_REGTYPE; break; default: - printk(KERN_ERR "Can't probe register map for given port\n"); + pr_err("Can't probe register map for given port\n"); return -EINVAL; } @@ -788,7 +788,7 @@ static int sci_handle_errors(struct uart_port *port) if (tty_insert_flip_char(tport, 0, TTY_OVERRUN)) copied++; - dev_notice(port->dev, "overrun error"); + dev_notice(port->dev, "overrun error\n"); } if (status & SCxSR_FER(port)) { @@ -830,7 +830,7 @@ static int sci_handle_errors(struct uart_port *port) if (tty_insert_flip_char(tport, 0, TTY_PARITY)) copied++; - dev_notice(port->dev, "parity error"); + dev_notice(port->dev, "parity error\n"); } if (copied) @@ -911,7 +911,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) /* Disable future Rx interrupts */ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { disable_irq_nosync(irq); - scr |= 0x4000; + scr |= SCSCR_RDRQE; } else { scr &= ~SCSCR_RIE; } @@ -1199,7 +1199,9 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) */ reg = sci_getreg(port, SCFCR); if (reg->size) - serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1); + serial_port_out(port, SCFCR, + serial_port_in(port, SCFCR) | + SCFCR_LOOP); } } @@ -1289,7 +1291,8 @@ static void sci_dma_rx_complete(void *arg) unsigned long flags; int count; - dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); + dev_dbg(port->dev, "%s(%d) active #%d\n", + __func__, port->line, s->active_rx); spin_lock_irqsave(&port->lock, flags); @@ -1365,8 +1368,8 @@ static void sci_submit_rx(struct sci_port *s) sci_rx_dma_release(s, true); return; } - dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, - s->cookie_rx[i], i); + dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", + __func__, s->cookie_rx[i], i); } s->active_rx = s->cookie_rx[0]; @@ -1425,8 +1428,8 @@ static void work_fn_rx(struct work_struct *work) s->active_rx = s->cookie_rx[!new]; - dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, - s->cookie_rx[new], new, s->active_rx); + dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", + __func__, s->cookie_rx[new], new, s->active_rx); } static void work_fn_tx(struct work_struct *work) @@ -1479,8 +1482,8 @@ static void work_fn_tx(struct work_struct *work) return; } - dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, - xmit->buf, xmit->tail, xmit->head, s->cookie_tx); + dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", + __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx); dma_async_issue_pending(chan); } @@ -1495,9 +1498,9 @@ static void sci_start_tx(struct uart_port *port) if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { u16 new, scr = serial_port_in(port, SCSCR); if (s->chan_tx) - new = scr | 0x8000; + new = scr | SCSCR_TDRQE; else - new = scr & ~0x8000; + new = scr & ~SCSCR_TDRQE; if (new != scr) serial_port_out(port, SCSCR, new); } @@ -1524,7 +1527,7 @@ static void sci_stop_tx(struct uart_port *port) ctrl = serial_port_in(port, SCSCR); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~0x8000; + ctrl &= ~SCSCR_TDRQE; ctrl &= ~SCSCR_TIE; @@ -1538,7 +1541,7 @@ static void sci_start_rx(struct uart_port *port) ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~0x4000; + ctrl &= ~SCSCR_RDRQE; serial_port_out(port, SCSCR, ctrl); } @@ -1550,7 +1553,7 @@ static void sci_stop_rx(struct uart_port *port) ctrl = serial_port_in(port, SCSCR); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~0x4000; + ctrl &= ~SCSCR_RDRQE; ctrl &= ~port_rx_irq_mask(port); @@ -1599,8 +1602,8 @@ static bool filter(struct dma_chan *chan, void *slave) { struct sh_dmae_slave *param = slave; - dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, - param->shdma_slave.slave_id); + dev_dbg(chan->device->dev, "%s: slave ID %d\n", + __func__, param->shdma_slave.slave_id); chan->private = ¶m->shdma_slave; return true; @@ -1613,7 +1616,7 @@ static void rx_timer_fn(unsigned long arg) u16 scr = serial_port_in(port, SCSCR); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - scr &= ~0x4000; + scr &= ~SCSCR_RDRQE; enable_irq(s->irqs[SCIx_RXI_IRQ]); } serial_port_out(port, SCSCR, scr | SCSCR_RIE); @@ -1629,8 +1632,7 @@ static void sci_request_dma(struct uart_port *port) dma_cap_mask_t mask; int nent; - dev_dbg(port->dev, "%s: port %d\n", __func__, - port->line); + dev_dbg(port->dev, "%s: port %d\n", __func__, port->line); if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0) return; @@ -1658,7 +1660,8 @@ static void sci_request_dma(struct uart_port *port) if (!nent) sci_tx_dma_release(s, false); else - dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__, + dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", + __func__, sg_dma_len(&s->sg_tx), port->state->xmit.buf, &sg_dma_address(&s->sg_tx)); @@ -1870,13 +1873,13 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, smr_val = serial_port_in(port, SCSMR) & 3; if ((termios->c_cflag & CSIZE) == CS7) - smr_val |= 0x40; + smr_val |= SCSMR_CHR; if (termios->c_cflag & PARENB) - smr_val |= 0x20; + smr_val |= SCSMR_PE; if (termios->c_cflag & PARODD) - smr_val |= 0x30; + smr_val |= SCSMR_PE | SCSMR_ODD; if (termios->c_cflag & CSTOPB) - smr_val |= 0x08; + smr_val |= SCSMR_STOP; uart_update_timeout(port, termios->c_cflag, baud); @@ -1884,7 +1887,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, __func__, smr_val, cks, t, s->cfg->scscr); if (t >= 0) { - serial_port_out(port, SCSMR, (smr_val & ~3) | cks); + serial_port_out(port, SCSMR, (smr_val & ~SCSMR_CKS) | cks); serial_port_out(port, SCBRR, t); reg = sci_getreg(port, HSSRR); if (reg->size) @@ -1932,8 +1935,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, if (s->chan_rx) { s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / port->fifosize / 2; - dev_dbg(port->dev, - "DMA Rx t-out %ums, tty t-out %u jiffies\n", + dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n", s->rx_timeout * 1000 / HZ, port->timeout); if (s->rx_timeout < msecs_to_jiffies(20)) s->rx_timeout = msecs_to_jiffies(20); @@ -1952,7 +1954,7 @@ static void sci_pm(struct uart_port *port, unsigned int state, struct sci_port *sci_port = to_sci_port(port); switch (state) { - case 3: + case UART_PM_STATE_OFF: sci_port_disable(sci_port); break; default: @@ -2017,7 +2019,7 @@ static int sci_remap_port(struct uart_port *port) * need to do any remapping, just cast the cookie * directly. */ - port->membase = (void __iomem *)port->mapbase; + port->membase = (void __iomem *)(uintptr_t)port->mapbase; } return 0; @@ -2388,8 +2390,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev) #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ -static char banner[] __initdata = - KERN_INFO "SuperH (H)SCI(F) driver initialized\n"; +static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized"; static struct uart_driver sci_uart_driver = { .owner = THIS_MODULE, @@ -2423,25 +2424,25 @@ struct sci_port_info { static const struct of_device_id of_sci_match[] = { { .compatible = "renesas,scif", - .data = (void *)&(const struct sci_port_info) { + .data = &(const struct sci_port_info) { .type = PORT_SCIF, .regtype = SCIx_SH4_SCIF_REGTYPE, }, }, { .compatible = "renesas,scifa", - .data = (void *)&(const struct sci_port_info) { + .data = &(const struct sci_port_info) { .type = PORT_SCIFA, .regtype = SCIx_SCIFA_REGTYPE, }, }, { .compatible = "renesas,scifb", - .data = (void *)&(const struct sci_port_info) { + .data = &(const struct sci_port_info) { .type = PORT_SCIFB, .regtype = SCIx_SCIFB_REGTYPE, }, }, { .compatible = "renesas,hscif", - .data = (void *)&(const struct sci_port_info) { + .data = &(const struct sci_port_info) { .type = PORT_HSCIF, .regtype = SCIx_HSCIF_REGTYPE, }, @@ -2501,11 +2502,9 @@ static int sci_probe_single(struct platform_device *dev, /* Sanity check */ if (unlikely(index >= SCI_NPORTS)) { - dev_notice(&dev->dev, "Attempting to register port " - "%d when only %d are available.\n", + dev_notice(&dev->dev, "Attempting to register port %d when only %d are available\n", index+1, SCI_NPORTS); - dev_notice(&dev->dev, "Consider bumping " - "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); + dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); return -EINVAL; } @@ -2563,6 +2562,7 @@ static int sci_probe(struct platform_device *dev) ret = cpufreq_register_notifier(&sp->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); if (unlikely(ret < 0)) { + uart_remove_one_port(&sci_uart_driver, &sp->port); sci_cleanup_single(sp); return ret; } @@ -2614,7 +2614,7 @@ static int __init sci_init(void) { int ret; - printk(banner); + pr_info("%s\n", banner); ret = uart_register_driver(&sci_uart_driver); if (likely(ret == 0)) { diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index b7bfe24d4ebc..68b0fd4b9a6a 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -24,7 +24,6 @@ #include <linux/dmaengine.h> #include <linux/dma-direction.h> #include <linux/dma-mapping.h> -#include <linux/sirfsoc_dma.h> #include <asm/irq.h> #include <asm/mach/irq.h> @@ -173,7 +172,7 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port) struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) { + if (sirfport->tx_dma_chan) { if (sirfport->tx_dma_state == TX_DMA_RUNNING) { dmaengine_pause(sirfport->tx_dma_chan); sirfport->tx_dma_state = TX_DMA_PAUSE; @@ -288,7 +287,7 @@ static void sirfsoc_uart_start_tx(struct uart_port *port) struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) + if (sirfport->tx_dma_chan) sirfsoc_uart_tx_with_dma(sirfport); else { sirfsoc_uart_pio_tx_chars(sirfport, 1); @@ -310,7 +309,7 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port) struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); - if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) { + if (sirfport->rx_dma_chan) { if (!sirfport->is_marco) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) & @@ -675,7 +674,7 @@ recv_char: uart_handle_cts_change(port, cts_status); wake_up_interruptible(&state->port.delta_msr_wait); } - if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) { + if (sirfport->rx_dma_chan) { if (intr_status & uint_st->sirfsoc_rx_timeout) sirfsoc_uart_handle_rx_tmo(sirfport); if (intr_status & uint_st->sirfsoc_rx_done) @@ -686,7 +685,7 @@ recv_char: SIRFSOC_UART_IO_RX_MAX_CNT); } if (intr_status & uint_st->sirfsoc_txfifo_empty) { - if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) + if (sirfport->tx_dma_chan) sirfsoc_uart_tx_with_dma(sirfport); else { if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { @@ -778,7 +777,7 @@ static void sirfsoc_uart_start_rx(struct uart_port *port) wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); - if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) + if (sirfport->rx_dma_chan) sirfsoc_uart_start_next_rx_dma(port); else { if (!sirfport->is_marco) @@ -1014,11 +1013,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, (sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) << SIRFSOC_USP_ASYNC_DIV2_OFFSET); } - if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) + if (sirfport->tx_dma_chan) wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE); else wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE); - if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) + if (sirfport->rx_dma_chan) wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE); else wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE); @@ -1049,93 +1048,6 @@ static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state, clk_disable_unprepare(sirfport->clk); } -static unsigned int sirfsoc_uart_init_tx_dma(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - dma_cap_mask_t dma_mask; - struct dma_slave_config tx_slv_cfg = { - .dst_maxburst = 2, - }; - - dma_cap_zero(dma_mask); - dma_cap_set(DMA_SLAVE, dma_mask); - sirfport->tx_dma_chan = dma_request_channel(dma_mask, - (dma_filter_fn)sirfsoc_dma_filter_id, - (void *)sirfport->tx_dma_no); - if (!sirfport->tx_dma_chan) { - dev_err(port->dev, "Uart Request Dma Channel Fail %d\n", - sirfport->tx_dma_no); - return -EPROBE_DEFER; - } - dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg); - - return 0; -} - -static unsigned int sirfsoc_uart_init_rx_dma(struct uart_port *port) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - dma_cap_mask_t dma_mask; - int ret; - int i, j; - struct dma_slave_config slv_cfg = { - .src_maxburst = 2, - }; - - dma_cap_zero(dma_mask); - dma_cap_set(DMA_SLAVE, dma_mask); - sirfport->rx_dma_chan = dma_request_channel(dma_mask, - (dma_filter_fn)sirfsoc_dma_filter_id, - (void *)sirfport->rx_dma_no); - if (!sirfport->rx_dma_chan) { - dev_err(port->dev, "Uart Request Dma Channel Fail %d\n", - sirfport->rx_dma_no); - ret = -EPROBE_DEFER; - goto request_err; - } - for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) { - sirfport->rx_dma_items[i].xmit.buf = - dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, - &sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL); - if (!sirfport->rx_dma_items[i].xmit.buf) { - dev_err(port->dev, "Uart alloc bufa failed\n"); - ret = -ENOMEM; - goto alloc_coherent_err; - } - sirfport->rx_dma_items[i].xmit.head = - sirfport->rx_dma_items[i].xmit.tail = 0; - } - dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg); - - return 0; -alloc_coherent_err: - for (j = 0; j < i; j++) - dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, - sirfport->rx_dma_items[j].xmit.buf, - sirfport->rx_dma_items[j].dma_addr); - dma_release_channel(sirfport->rx_dma_chan); -request_err: - return ret; -} - -static void sirfsoc_uart_uninit_tx_dma(struct sirfsoc_uart_port *sirfport) -{ - dmaengine_terminate_all(sirfport->tx_dma_chan); - dma_release_channel(sirfport->tx_dma_chan); -} - -static void sirfsoc_uart_uninit_rx_dma(struct sirfsoc_uart_port *sirfport) -{ - int i; - struct uart_port *port = &sirfport->port; - dmaengine_terminate_all(sirfport->rx_dma_chan); - dma_release_channel(sirfport->rx_dma_chan); - for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) - dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, - sirfport->rx_dma_items[i].xmit.buf, - sirfport->rx_dma_items[i].dma_addr); -} - static int sirfsoc_uart_startup(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); @@ -1174,18 +1086,12 @@ static int sirfsoc_uart_startup(struct uart_port *port) wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port)); wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port)); - - if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) { - ret = sirfsoc_uart_init_rx_dma(port); - if (ret) - goto init_rx_err; + if (sirfport->rx_dma_chan) wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk, - SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) | - SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) | - SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b)); - } - if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) { - sirfsoc_uart_init_tx_dma(port); + SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) | + SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) | + SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b)); + if (sirfport->tx_dma_chan) { sirfport->tx_dma_state = TX_DMA_IDLE; wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk, SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) | @@ -1232,12 +1138,8 @@ static void sirfsoc_uart_shutdown(struct uart_port *port) gpio_set_value(sirfport->rts_gpio, 1); free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport); } - if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) - sirfsoc_uart_uninit_rx_dma(sirfport); - if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) { - sirfsoc_uart_uninit_tx_dma(sirfport); + if (sirfport->tx_dma_chan) sirfport->tx_dma_state = TX_DMA_IDLE; - } } static const char *sirfsoc_uart_type(struct uart_port *port) @@ -1313,8 +1215,8 @@ sirfsoc_uart_console_setup(struct console *co, char *options) port->cons = co; /* default console tx/rx transfer using io mode */ - sirfport->rx_dma_no = UNVALID_DMA_CHAN; - sirfport->tx_dma_no = UNVALID_DMA_CHAN; + sirfport->rx_dma_chan = NULL; + sirfport->tx_dma_chan = NULL; return uart_set_options(port, co, baud, parity, bits, flow); } @@ -1382,6 +1284,13 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) struct uart_port *port; struct resource *res; int ret; + int i, j; + struct dma_slave_config slv_cfg = { + .src_maxburst = 2, + }; + struct dma_slave_config tx_slv_cfg = { + .dst_maxburst = 2, + }; const struct of_device_id *match; match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node); @@ -1402,27 +1311,10 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node, "sirf,uart-has-rtscts"); - if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) { + if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) sirfport->uart_reg->uart_type = SIRF_REAL_UART; - if (of_property_read_u32(pdev->dev.of_node, - "sirf,uart-dma-rx-channel", - &sirfport->rx_dma_no)) - sirfport->rx_dma_no = UNVALID_DMA_CHAN; - if (of_property_read_u32(pdev->dev.of_node, - "sirf,uart-dma-tx-channel", - &sirfport->tx_dma_no)) - sirfport->tx_dma_no = UNVALID_DMA_CHAN; - } if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) { sirfport->uart_reg->uart_type = SIRF_USP_UART; - if (of_property_read_u32(pdev->dev.of_node, - "sirf,usp-dma-rx-channel", - &sirfport->rx_dma_no)) - sirfport->rx_dma_no = UNVALID_DMA_CHAN; - if (of_property_read_u32(pdev->dev.of_node, - "sirf,usp-dma-tx-channel", - &sirfport->tx_dma_no)) - sirfport->tx_dma_no = UNVALID_DMA_CHAN; if (!sirfport->hw_flow_ctrl) goto usp_no_flow_control; if (of_find_property(pdev->dev.of_node, "cts-gpios", NULL)) @@ -1515,8 +1407,32 @@ usp_no_flow_control: goto port_err; } - return 0; + sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx"); + for (i = 0; sirfport->rx_dma_chan && i < SIRFSOC_RX_LOOP_BUF_CNT; i++) { + sirfport->rx_dma_items[i].xmit.buf = + dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + &sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL); + if (!sirfport->rx_dma_items[i].xmit.buf) { + dev_err(port->dev, "Uart alloc bufa failed\n"); + ret = -ENOMEM; + goto alloc_coherent_err; + } + sirfport->rx_dma_items[i].xmit.head = + sirfport->rx_dma_items[i].xmit.tail = 0; + } + if (sirfport->rx_dma_chan) + dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg); + sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx"); + if (sirfport->tx_dma_chan) + dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg); + return 0; +alloc_coherent_err: + for (j = 0; j < i; j++) + dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + sirfport->rx_dma_items[j].xmit.buf, + sirfport->rx_dma_items[j].dma_addr); + dma_release_channel(sirfport->rx_dma_chan); port_err: clk_put(sirfport->clk); err: @@ -1529,6 +1445,19 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) struct uart_port *port = &sirfport->port; clk_put(sirfport->clk); uart_remove_one_port(&sirfsoc_uart_drv, port); + if (sirfport->rx_dma_chan) { + int i; + dmaengine_terminate_all(sirfport->rx_dma_chan); + dma_release_channel(sirfport->rx_dma_chan); + for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) + dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + sirfport->rx_dma_items[i].xmit.buf, + sirfport->rx_dma_items[i].dma_addr); + } + if (sirfport->tx_dma_chan) { + dmaengine_terminate_all(sirfport->tx_dma_chan); + dma_release_channel(sirfport->tx_dma_chan); + } return 0; } diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index b7d679c0881b..8a6eddad2f3c 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -392,9 +392,6 @@ struct sirfsoc_uart_register sirfsoc_uart = { /* Indicate how many buffers used */ #define SIRFSOC_RX_LOOP_BUF_CNT 2 -/* Indicate if DMA channel valid */ -#define IS_DMA_CHAN_VALID(x) ((x) != -1) -#define UNVALID_DMA_CHAN -1 /* For Fast Baud Rate Calculation */ struct sirfsoc_baudrate_to_regv { unsigned int baud_rate; @@ -423,8 +420,6 @@ struct sirfsoc_uart_port { /* for SiRFmarco, there are SET/CLR for UART_INT_EN */ bool is_marco; struct sirfsoc_uart_register *uart_reg; - int rx_dma_no; - int tx_dma_no; struct dma_chan *rx_dma_chan; struct dma_chan *tx_dma_chan; dma_addr_t tx_dma_addr; diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 5ae14b46cce0..d48e040cd8c5 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -7866,6 +7866,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + memset(&new_line, 0, sizeof(new_line)); switch (flags){ case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index 144202eef6fe..53ba8537de8d 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -1766,6 +1766,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + memset(&new_line, 0, sizeof(new_line)); switch (flags){ case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 765125dff20e..8ebd9f88a6f6 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -351,14 +351,11 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags); * Takes any pending buffers and transfers their ownership to the * ldisc side of the queue. It then schedules those characters for * processing by the line discipline. - * Note that this function can only be used when the low_latency flag - * is unset. Otherwise the workqueue won't be flushed. */ void tty_schedule_flip(struct tty_port *port) { struct tty_bufhead *buf = &port->buf; - WARN_ON(port->low_latency); buf->tail->commit = buf->tail->used; schedule_work(&buf->work); @@ -482,17 +479,15 @@ static void flush_to_ldisc(struct work_struct *work) */ void tty_flush_to_ldisc(struct tty_struct *tty) { - if (!tty->port->low_latency) - flush_work(&tty->port->buf.work); + flush_work(&tty->port->buf.work); } /** * tty_flip_buffer_push - terminal * @port: tty port to push * - * Queue a push of the terminal flip buffers to the line discipline. This - * function must not be called from IRQ context if port->low_latency is - * set. + * Queue a push of the terminal flip buffers to the line discipline. + * Can be called from IRQ/atomic context. * * In the event of the queue being busy for flipping the work will be * held off and retried later. @@ -500,14 +495,7 @@ void tty_flush_to_ldisc(struct tty_struct *tty) void tty_flip_buffer_push(struct tty_port *port) { - struct tty_bufhead *buf = &port->buf; - - buf->tail->commit = buf->tail->used; - - if (port->low_latency) - flush_to_ldisc(&buf->work); - else - schedule_work(&buf->work); + tty_schedule_flip(port); } EXPORT_SYMBOL(tty_flip_buffer_push); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index c74a00ad7add..d3448a90f0f9 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1271,12 +1271,13 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p) * * Locking: None */ -static void tty_line_name(struct tty_driver *driver, int index, char *p) +static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p) { if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE) - strcpy(p, driver->name); + return sprintf(p, "%s", driver->name); else - sprintf(p, "%s%d", driver->name, index + driver->name_base); + return sprintf(p, "%s%d", driver->name, + index + driver->name_base); } /** @@ -3545,9 +3546,19 @@ static ssize_t show_cons_active(struct device *dev, if (i >= ARRAY_SIZE(cs)) break; } - while (i--) - count += sprintf(buf + count, "%s%d%c", - cs[i]->name, cs[i]->index, i ? ' ':'\n'); + while (i--) { + int index = cs[i]->index; + struct tty_driver *drv = cs[i]->device(cs[i], &index); + + /* don't resolve tty0 as some programs depend on it */ + if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR)) + count += tty_line_name(drv, index, buf + count); + else + count += sprintf(buf + count, "%s%d", + cs[i]->name, cs[i]->index); + + count += sprintf(buf + count, "%c", i ? ' ':'\n'); + } console_unlock(); return count; diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 23b5d32954bf..3ad0b61e35b4 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1590,9 +1590,9 @@ static void restore_cur(struct vc_data *vc) vc->vc_need_wrap = 0; } -enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey, +enum { ESnormal, ESesc, ESsquare, ESgetpars, ESfunckey, EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd, - ESpalette }; + ESpalette, ESosc }; /* console_lock is held (except via vc_init()) */ static void reset_terminal(struct vc_data *vc, int do_clear) @@ -1652,11 +1652,15 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) * Control characters can be used in the _middle_ * of an escape sequence. */ + if (vc->vc_state == ESosc && c>=8 && c<=13) /* ... except for OSC */ + return; switch (c) { case 0: return; case 7: - if (vc->vc_bell_duration) + if (vc->vc_state == ESosc) + vc->vc_state = ESnormal; + else if (vc->vc_bell_duration) kd_mksound(vc->vc_bell_pitch, vc->vc_bell_duration); return; case 8: @@ -1767,7 +1771,9 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) } else if (c=='R') { /* reset palette */ reset_palette(vc); vc->vc_state = ESnormal; - } else + } else if (c>='0' && c<='9') + vc->vc_state = ESosc; + else vc->vc_state = ESnormal; return; case ESpalette: @@ -1807,9 +1813,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_par[vc->vc_npar] *= 10; vc->vc_par[vc->vc_npar] += c - '0'; return; - } else - vc->vc_state = ESgotpars; - case ESgotpars: + } vc->vc_state = ESnormal; switch(c) { case 'h': @@ -2023,6 +2027,8 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_translate = set_translate(vc->vc_G1_charset, vc); vc->vc_state = ESnormal; return; + case ESosc: + return; default: vc->vc_state = ESnormal; } |