video: move fbdev to drivers/video/fbdev

The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers, fbdev framework files.

Make some order into the chaos by creating drivers/video/fbdev
directory, and move all fbdev related files there.

No functionality is changed, although I guess it is possible that some
subtle Makefile build order related issue could be created by this
patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

15 files changed, 0 insertions, 6747 deletions

diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
deleted file mode 100644
index e6cfc38160d3..000000000000
--- a/drivers/video/omap2/displays-new/Kconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-menu "OMAP Display Device Drivers (new device model)"
-        depends on OMAP2_DSS
-
-config DISPLAY_ENCODER_TFP410
-        tristate "TFP410 DPI to DVI Encoder"
-	help
-	  Driver for TFP410 DPI to DVI encoder.
-
-config DISPLAY_ENCODER_TPD12S015
-        tristate "TPD12S015 HDMI ESD protection and level shifter"
-	help
-	  Driver for TPD12S015, which offers HDMI ESD protection and level
-	  shifting.
-
-config DISPLAY_CONNECTOR_DVI
-        tristate "DVI Connector"
-	depends on I2C
-	help
-	  Driver for a generic DVI connector.
-
-config DISPLAY_CONNECTOR_HDMI
-        tristate "HDMI Connector"
-	help
-	  Driver for a generic HDMI connector.
-
-config DISPLAY_CONNECTOR_ANALOG_TV
-        tristate "Analog TV Connector"
-	help
-	  Driver for a generic analog TV connector.
-
-config DISPLAY_PANEL_DPI
-	tristate "Generic DPI panel"
-	help
-	  Driver for generic DPI panels.
-
-config DISPLAY_PANEL_DSI_CM
-	tristate "Generic DSI Command Mode Panel"
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  Driver for generic DSI command mode panels.
-
-config DISPLAY_PANEL_SONY_ACX565AKM
-	tristate "ACX565AKM Panel"
-	depends on SPI && BACKLIGHT_CLASS_DEVICE
-	help
-	  This is the LCD panel used on Nokia N900
-
-config DISPLAY_PANEL_LGPHILIPS_LB035Q02
-	tristate "LG.Philips LB035Q02 LCD Panel"
-	depends on SPI
-	help
-	  LCD Panel used on the Gumstix Overo Palo35
-
-config DISPLAY_PANEL_SHARP_LS037V7DW01
-        tristate "Sharp LS037V7DW01 LCD Panel"
-        depends on BACKLIGHT_CLASS_DEVICE
-        help
-          LCD Panel used in TI's SDP3430 and EVM boards
-
-config DISPLAY_PANEL_TPO_TD028TTEC1
-        tristate "TPO TD028TTEC1 LCD Panel"
-        depends on SPI
-        help
-          LCD panel used in Openmoko.
-
-config DISPLAY_PANEL_TPO_TD043MTEA1
-        tristate "TPO TD043MTEA1 LCD Panel"
-        depends on SPI
-        help
-          LCD Panel used in OMAP3 Pandora
-
-config DISPLAY_PANEL_NEC_NL8048HL11
-	tristate "NEC NL8048HL11 Panel"
-	depends on SPI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-		This NEC NL8048HL11 panel is TFT LCD used in the
-		Zoom2/3/3630 sdp boards.
-
-endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
deleted file mode 100644
index 0323a8a1c682..000000000000
--- a/drivers/video/omap2/displays-new/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
-obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
-obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
-obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o
-obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
-obj-$(CONFIG_DISPLAY_PANEL_DPI) += panel-dpi.o
-obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o
-obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
-obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
-obj-$(CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
-obj-$(CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
-obj-$(CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
-obj-$(CONFIG_DISPLAY_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c b/drivers/video/omap2/displays-new/connector-analog-tv.c
deleted file mode 100644
index 5ee3b5505f7f..000000000000
--- a/drivers/video/omap2/displays-new/connector-analog-tv.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * Analog TV Connector driver
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	struct device *dev;
-
-	struct omap_video_timings timings;
-
-	enum omap_dss_venc_type connector_type;
-	bool invert_polarity;
-};
-
-static const struct omap_video_timings tvc_pal_timings = {
-	.x_res		= 720,
-	.y_res		= 574,
-	.pixelclock	= 13500000,
-	.hsw		= 64,
-	.hfp		= 12,
-	.hbp		= 68,
-	.vsw		= 5,
-	.vfp		= 5,
-	.vbp		= 41,
-
-	.interlace	= true,
-};
-
-static const struct of_device_id tvc_of_match[];
-
-struct tvc_of_data {
-	enum omap_dss_venc_type connector_type;
-};
-
-#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-
-static int tvc_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	dev_dbg(ddata->dev, "connect\n");
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.atv->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void tvc_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(ddata->dev, "disconnect\n");
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.atv->disconnect(in, dssdev);
-}
-
-static int tvc_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	dev_dbg(ddata->dev, "enable\n");
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.atv->set_timings(in, &ddata->timings);
-
-	if (!ddata->dev->of_node) {
-		in->ops.atv->set_type(in, ddata->connector_type);
-
-		in->ops.atv->invert_vid_out_polarity(in,
-			ddata->invert_polarity);
-	}
-
-	r = in->ops.atv->enable(in);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return r;
-}
-
-static void tvc_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(ddata->dev, "disable\n");
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	in->ops.atv->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void tvc_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->timings = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.atv->set_timings(in, timings);
-}
-
-static void tvc_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->timings;
-}
-
-static int tvc_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.atv->check_timings(in, timings);
-}
-
-static u32 tvc_get_wss(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.atv->get_wss(in);
-}
-
-static int tvc_set_wss(struct omap_dss_device *dssdev, u32 wss)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.atv->set_wss(in, wss);
-}
-
-static struct omap_dss_driver tvc_driver = {
-	.connect		= tvc_connect,
-	.disconnect		= tvc_disconnect,
-
-	.enable			= tvc_enable,
-	.disable		= tvc_disable,
-
-	.set_timings		= tvc_set_timings,
-	.get_timings		= tvc_get_timings,
-	.check_timings		= tvc_check_timings,
-
-	.get_resolution		= omapdss_default_get_resolution,
-
-	.get_wss		= tvc_get_wss,
-	.set_wss		= tvc_set_wss,
-};
-
-static int tvc_probe_pdata(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct connector_atv_platform_data *pdata;
-	struct omap_dss_device *in, *dssdev;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "Failed to find video source\n");
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->connector_type = pdata->connector_type;
-	ddata->invert_polarity = ddata->invert_polarity;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int tvc_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
-static int tvc_probe(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-	ddata->dev = &pdev->dev;
-
-	if (dev_get_platdata(&pdev->dev)) {
-		r = tvc_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = tvc_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	ddata->timings = tvc_pal_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->driver = &tvc_driver;
-	dssdev->dev = &pdev->dev;
-	dssdev->type = OMAP_DISPLAY_TYPE_VENC;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = tvc_pal_timings;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&pdev->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-err_reg:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int __exit tvc_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	omapdss_unregister_display(&ddata->dssdev);
-
-	tvc_disable(dssdev);
-	tvc_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static const struct of_device_id tvc_of_match[] = {
-	{ .compatible = "omapdss,svideo-connector", },
-	{ .compatible = "omapdss,composite-video-connector", },
-	{},
-};
-
-static struct platform_driver tvc_connector_driver = {
-	.probe	= tvc_probe,
-	.remove	= __exit_p(tvc_remove),
-	.driver	= {
-		.name	= "connector-analog-tv",
-		.owner	= THIS_MODULE,
-		.of_match_table = tvc_of_match,
-	},
-};
-
-module_platform_driver(tvc_connector_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("Analog TV Connector driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/connector-dvi.c b/drivers/video/omap2/displays-new/connector-dvi.c
deleted file mode 100644
index 74de2bc50c4f..000000000000
--- a/drivers/video/omap2/displays-new/connector-dvi.c
+++ /dev/null
@@ -1,401 +0,0 @@
-/*
- * Generic DVI Connector driver
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <drm/drm_edid.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-static const struct omap_video_timings dvic_default_timings = {
-	.x_res		= 640,
-	.y_res		= 480,
-
-	.pixelclock	= 23500000,
-
-	.hfp		= 48,
-	.hsw		= 32,
-	.hbp		= 80,
-
-	.vfp		= 3,
-	.vsw		= 4,
-	.vbp		= 7,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	struct omap_video_timings timings;
-
-	struct i2c_adapter *i2c_adapter;
-};
-
-#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-
-static int dvic_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dvi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void dvic_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dvi->disconnect(in, dssdev);
-}
-
-static int dvic_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.dvi->set_timings(in, &ddata->timings);
-
-	r = in->ops.dvi->enable(in);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void dvic_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	in->ops.dvi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void dvic_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->timings = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dvi->set_timings(in, timings);
-}
-
-static void dvic_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->timings;
-}
-
-static int dvic_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dvi->check_timings(in, timings);
-}
-
-static int dvic_ddc_read(struct i2c_adapter *adapter,
-		unsigned char *buf, u16 count, u8 offset)
-{
-	int r, retries;
-
-	for (retries = 3; retries > 0; retries--) {
-		struct i2c_msg msgs[] = {
-			{
-				.addr   = DDC_ADDR,
-				.flags  = 0,
-				.len    = 1,
-				.buf    = &offset,
-			}, {
-				.addr   = DDC_ADDR,
-				.flags  = I2C_M_RD,
-				.len    = count,
-				.buf    = buf,
-			}
-		};
-
-		r = i2c_transfer(adapter, msgs, 2);
-		if (r == 2)
-			return 0;
-
-		if (r != -EAGAIN)
-			break;
-	}
-
-	return r < 0 ? r : -EIO;
-}
-
-static int dvic_read_edid(struct omap_dss_device *dssdev,
-		u8 *edid, int len)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	int r, l, bytes_read;
-
-	if (!ddata->i2c_adapter)
-		return -ENODEV;
-
-	l = min(EDID_LENGTH, len);
-	r = dvic_ddc_read(ddata->i2c_adapter, edid, l, 0);
-	if (r)
-		return r;
-
-	bytes_read = l;
-
-	/* if there are extensions, read second block */
-	if (len > EDID_LENGTH && edid[0x7e] > 0) {
-		l = min(EDID_LENGTH, len - EDID_LENGTH);
-
-		r = dvic_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
-				l, EDID_LENGTH);
-		if (r)
-			return r;
-
-		bytes_read += l;
-	}
-
-	return bytes_read;
-}
-
-static bool dvic_detect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	unsigned char out;
-	int r;
-
-	if (!ddata->i2c_adapter)
-		return true;
-
-	r = dvic_ddc_read(ddata->i2c_adapter, &out, 1, 0);
-
-	return r == 0;
-}
-
-static struct omap_dss_driver dvic_driver = {
-	.connect	= dvic_connect,
-	.disconnect	= dvic_disconnect,
-
-	.enable		= dvic_enable,
-	.disable	= dvic_disable,
-
-	.set_timings	= dvic_set_timings,
-	.get_timings	= dvic_get_timings,
-	.check_timings	= dvic_check_timings,
-
-	.get_resolution	= omapdss_default_get_resolution,
-
-	.read_edid	= dvic_read_edid,
-	.detect		= dvic_detect,
-};
-
-static int dvic_probe_pdata(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct connector_dvi_platform_data *pdata;
-	struct omap_dss_device *in, *dssdev;
-	int i2c_bus_num;
-
-	pdata = dev_get_platdata(&pdev->dev);
-	i2c_bus_num = pdata->i2c_bus_num;
-
-	if (i2c_bus_num != -1) {
-		struct i2c_adapter *adapter;
-
-		adapter = i2c_get_adapter(i2c_bus_num);
-		if (!adapter) {
-			dev_err(&pdev->dev,
-					"Failed to get I2C adapter, bus %d\n",
-					i2c_bus_num);
-			return -EPROBE_DEFER;
-		}
-
-		ddata->i2c_adapter = adapter;
-	}
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		if (ddata->i2c_adapter)
-			i2c_put_adapter(ddata->i2c_adapter);
-
-		dev_err(&pdev->dev, "Failed to find video source\n");
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int dvic_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-	struct device_node *adapter_node;
-	struct i2c_adapter *adapter;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
-	if (adapter_node) {
-		adapter = of_find_i2c_adapter_by_node(adapter_node);
-		if (adapter == NULL) {
-			dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
-			omap_dss_put_device(ddata->in);
-			return -EPROBE_DEFER;
-		}
-
-		ddata->i2c_adapter = adapter;
-	}
-
-	return 0;
-}
-
-static int dvic_probe(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-
-	if (dev_get_platdata(&pdev->dev)) {
-		r = dvic_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = dvic_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	ddata->timings = dvic_default_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->driver = &dvic_driver;
-	dssdev->dev = &pdev->dev;
-	dssdev->type = OMAP_DISPLAY_TYPE_DVI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = dvic_default_timings;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&pdev->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-	omap_dss_put_device(ddata->in);
-
-	if (ddata->i2c_adapter)
-		i2c_put_adapter(ddata->i2c_adapter);
-
-	return r;
-}
-
-static int __exit dvic_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	omapdss_unregister_display(&ddata->dssdev);
-
-	dvic_disable(dssdev);
-	dvic_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	if (ddata->i2c_adapter)
-		i2c_put_adapter(ddata->i2c_adapter);
-
-	return 0;
-}
-
-static const struct of_device_id dvic_of_match[] = {
-	{ .compatible = "omapdss,dvi-connector", },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, dvic_of_match);
-
-static struct platform_driver dvi_connector_driver = {
-	.probe	= dvic_probe,
-	.remove	= __exit_p(dvic_remove),
-	.driver	= {
-		.name	= "connector-dvi",
-		.owner	= THIS_MODULE,
-		.of_match_table = dvic_of_match,
-	},
-};
-
-module_platform_driver(dvi_connector_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("Generic DVI Connector driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/connector-hdmi.c b/drivers/video/omap2/displays-new/connector-hdmi.c
deleted file mode 100644
index 29ed21b9dce5..000000000000
--- a/drivers/video/omap2/displays-new/connector-hdmi.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * HDMI Connector driver
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#include <drm/drm_edid.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-static const struct omap_video_timings hdmic_default_timings = {
-	.x_res		= 640,
-	.y_res		= 480,
-	.pixelclock	= 25175000,
-	.hsw		= 96,
-	.hfp		= 16,
-	.hbp		= 48,
-	.vsw		= 2,
-	.vfp		= 11,
-	.vbp		= 31,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-
-	.interlace	= false,
-};
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	struct device *dev;
-
-	struct omap_video_timings timings;
-};
-
-#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-
-static int hdmic_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	dev_dbg(ddata->dev, "connect\n");
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.hdmi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void hdmic_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(ddata->dev, "disconnect\n");
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.hdmi->disconnect(in, dssdev);
-}
-
-static int hdmic_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	dev_dbg(ddata->dev, "enable\n");
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.hdmi->set_timings(in, &ddata->timings);
-
-	r = in->ops.hdmi->enable(in);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return r;
-}
-
-static void hdmic_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(ddata->dev, "disable\n");
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	in->ops.hdmi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void hdmic_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->timings = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.hdmi->set_timings(in, timings);
-}
-
-static void hdmic_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->timings;
-}
-
-static int hdmic_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->check_timings(in, timings);
-}
-
-static int hdmic_read_edid(struct omap_dss_device *dssdev,
-		u8 *edid, int len)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->read_edid(in, edid, len);
-}
-
-static bool hdmic_detect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->detect(in);
-}
-
-static int hdmic_audio_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	/* enable audio only if the display is active */
-	if (!omapdss_device_is_enabled(dssdev))
-		return -EPERM;
-
-	r = in->ops.hdmi->audio_enable(in);
-	if (r)
-		return r;
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
-
-	return 0;
-}
-
-static void hdmic_audio_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_disable(in);
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_DISABLED;
-}
-
-static int hdmic_audio_start(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	/*
-	 * No need to check the panel state. It was checked when trasitioning
-	 * to AUDIO_ENABLED.
-	 */
-	if (dssdev->audio_state != OMAP_DSS_AUDIO_ENABLED)
-		return -EPERM;
-
-	r = in->ops.hdmi->audio_start(in);
-	if (r)
-		return r;
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_PLAYING;
-
-	return 0;
-}
-
-static void hdmic_audio_stop(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_stop(in);
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
-}
-
-static bool hdmic_audio_supported(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return false;
-
-	return in->ops.hdmi->audio_supported(in);
-}
-
-static int hdmic_audio_config(struct omap_dss_device *dssdev,
-		struct omap_dss_audio *audio)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	/* config audio only if the display is active */
-	if (!omapdss_device_is_enabled(dssdev))
-		return -EPERM;
-
-	r = in->ops.hdmi->audio_config(in, audio);
-	if (r)
-		return r;
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_CONFIGURED;
-
-	return 0;
-}
-
-static struct omap_dss_driver hdmic_driver = {
-	.connect		= hdmic_connect,
-	.disconnect		= hdmic_disconnect,
-
-	.enable			= hdmic_enable,
-	.disable		= hdmic_disable,
-
-	.set_timings		= hdmic_set_timings,
-	.get_timings		= hdmic_get_timings,
-	.check_timings		= hdmic_check_timings,
-
-	.get_resolution		= omapdss_default_get_resolution,
-
-	.read_edid		= hdmic_read_edid,
-	.detect			= hdmic_detect,
-
-	.audio_enable		= hdmic_audio_enable,
-	.audio_disable		= hdmic_audio_disable,
-	.audio_start		= hdmic_audio_start,
-	.audio_stop		= hdmic_audio_stop,
-	.audio_supported	= hdmic_audio_supported,
-	.audio_config		= hdmic_audio_config,
-};
-
-static int hdmic_probe_pdata(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct connector_hdmi_platform_data *pdata;
-	struct omap_dss_device *in, *dssdev;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "Failed to find video source\n");
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int hdmic_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
-static int hdmic_probe(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-	ddata->dev = &pdev->dev;
-
-	if (dev_get_platdata(&pdev->dev)) {
-		r = hdmic_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = hdmic_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	ddata->timings = hdmic_default_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->driver = &hdmic_driver;
-	dssdev->dev = &pdev->dev;
-	dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = hdmic_default_timings;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&pdev->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-err_reg:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int __exit hdmic_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	omapdss_unregister_display(&ddata->dssdev);
-
-	hdmic_disable(dssdev);
-	hdmic_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static const struct of_device_id hdmic_of_match[] = {
-	{ .compatible = "omapdss,hdmi-connector", },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, hdmic_of_match);
-
-static struct platform_driver hdmi_connector_driver = {
-	.probe	= hdmic_probe,
-	.remove	= __exit_p(hdmic_remove),
-	.driver	= {
-		.name	= "connector-hdmi",
-		.owner	= THIS_MODULE,
-		.of_match_table = hdmic_of_match,
-	},
-};
-
-module_platform_driver(hdmi_connector_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("HDMI Connector driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/encoder-tfp410.c b/drivers/video/omap2/displays-new/encoder-tfp410.c
deleted file mode 100644
index b4e9a42a79e6..000000000000
--- a/drivers/video/omap2/displays-new/encoder-tfp410.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * TFP410 DPI-to-DVI encoder driver
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/of_gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	int pd_gpio;
-	int data_lines;
-
-	struct omap_video_timings timings;
-};
-
-#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-
-static int tfp410_connect(struct omap_dss_device *dssdev,
-		struct omap_dss_device *dst)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return -EBUSY;
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	dst->src = dssdev;
-	dssdev->dst = dst;
-
-	return 0;
-}
-
-static void tfp410_disconnect(struct omap_dss_device *dssdev,
-		struct omap_dss_device *dst)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	WARN_ON(!omapdss_device_is_connected(dssdev));
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	WARN_ON(dst != dssdev->dst);
-	if (dst != dssdev->dst)
-		return;
-
-	dst->src = NULL;
-	dssdev->dst = NULL;
-
-	in->ops.dpi->disconnect(in, &ddata->dssdev);
-}
-
-static int tfp410_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.dpi->set_timings(in, &ddata->timings);
-	if (ddata->data_lines)
-		in->ops.dpi->set_data_lines(in, ddata->data_lines);
-
-	r = in->ops.dpi->enable(in);
-	if (r)
-		return r;
-
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 1);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void tfp410_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value_cansleep(ddata->pd_gpio, 0);
-
-	in->ops.dpi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void tfp410_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->timings = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dpi->set_timings(in, timings);
-}
-
-static void tfp410_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->timings;
-}
-
-static int tfp410_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, timings);
-}
-
-static const struct omapdss_dvi_ops tfp410_dvi_ops = {
-	.connect	= tfp410_connect,
-	.disconnect	= tfp410_disconnect,
-
-	.enable		= tfp410_enable,
-	.disable	= tfp410_disable,
-
-	.check_timings	= tfp410_check_timings,
-	.set_timings	= tfp410_set_timings,
-	.get_timings	= tfp410_get_timings,
-};
-
-static int tfp410_probe_pdata(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct encoder_tfp410_platform_data *pdata;
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	ddata->pd_gpio = pdata->power_down_gpio;
-
-	ddata->data_lines = pdata->data_lines;
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "Failed to find video source\n");
-		return -ENODEV;
-	}
-
-	ddata->in = in;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int tfp410_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
-
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->pd_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse PD gpio\n");
-		return gpio;
-	}
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
-static int tfp410_probe(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-
-	if (dev_get_platdata(&pdev->dev)) {
-		r = tfp410_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = tfp410_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->pd_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
-				GPIOF_OUT_INIT_LOW, "tfp410 PD");
-		if (r) {
-			dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
-					ddata->pd_gpio);
-			goto err_gpio;
-		}
-	}
-
-	dssdev = &ddata->dssdev;
-	dssdev->ops.dvi = &tfp410_dvi_ops;
-	dssdev->dev = &pdev->dev;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->phy.dpi.data_lines = ddata->data_lines;
-
-	r = omapdss_register_output(dssdev);
-	if (r) {
-		dev_err(&pdev->dev, "Failed to register output\n");
-		goto err_reg;
-	}
-
-	return 0;
-err_reg:
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int __exit tfp410_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	omapdss_unregister_output(&ddata->dssdev);
-
-	WARN_ON(omapdss_device_is_enabled(dssdev));
-	if (omapdss_device_is_enabled(dssdev))
-		tfp410_disable(dssdev);
-
-	WARN_ON(omapdss_device_is_connected(dssdev));
-	if (omapdss_device_is_connected(dssdev))
-		tfp410_disconnect(dssdev, dssdev->dst);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static const struct of_device_id tfp410_of_match[] = {
-	{ .compatible = "omapdss,ti,tfp410", },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, tfp410_of_match);
-
-static struct platform_driver tfp410_driver = {
-	.probe	= tfp410_probe,
-	.remove	= __exit_p(tfp410_remove),
-	.driver	= {
-		.name	= "tfp410",
-		.owner	= THIS_MODULE,
-		.of_match_table = tfp410_of_match,
-	},
-};
-
-module_platform_driver(tfp410_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/encoder-tpd12s015.c b/drivers/video/omap2/displays-new/encoder-tpd12s015.c
deleted file mode 100644
index 7e33686171e3..000000000000
--- a/drivers/video/omap2/displays-new/encoder-tpd12s015.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- * TPD12S015 HDMI ESD protection & level shifter chip driver
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/of_gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	int ct_cp_hpd_gpio;
-	int ls_oe_gpio;
-	int hpd_gpio;
-
-	struct omap_video_timings timings;
-
-	struct completion hpd_completion;
-};
-
-#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-
-static irqreturn_t tpd_hpd_irq_handler(int irq, void *data)
-{
-	struct panel_drv_data *ddata = data;
-	bool hpd;
-
-	hpd = gpio_get_value_cansleep(ddata->hpd_gpio);
-
-	dev_dbg(ddata->dssdev.dev, "hpd %d\n", hpd);
-
-	if (gpio_is_valid(ddata->ls_oe_gpio)) {
-		if (hpd)
-			gpio_set_value_cansleep(ddata->ls_oe_gpio, 1);
-		else
-			gpio_set_value_cansleep(ddata->ls_oe_gpio, 0);
-	}
-
-	complete_all(&ddata->hpd_completion);
-
-	return IRQ_HANDLED;
-}
-
-static int tpd_connect(struct omap_dss_device *dssdev,
-		struct omap_dss_device *dst)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	r = in->ops.hdmi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	dst->src = dssdev;
-	dssdev->dst = dst;
-
-	reinit_completion(&ddata->hpd_completion);
-
-	gpio_set_value_cansleep(ddata->ct_cp_hpd_gpio, 1);
-	/* DC-DC converter needs at max 300us to get to 90% of 5V */
-	udelay(300);
-
-	/*
-	 * If there's a cable connected, wait for the hpd irq to trigger,
-	 * which turns on the level shifters.
-	 */
-	if (gpio_get_value_cansleep(ddata->hpd_gpio)) {
-		unsigned long to;
-		to = wait_for_completion_timeout(&ddata->hpd_completion,
-				msecs_to_jiffies(250));
-		WARN_ON_ONCE(to == 0);
-	}
-
-	return 0;
-}
-
-static void tpd_disconnect(struct omap_dss_device *dssdev,
-		struct omap_dss_device *dst)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	WARN_ON(dst != dssdev->dst);
-
-	if (dst != dssdev->dst)
-		return;
-
-	gpio_set_value_cansleep(ddata->ct_cp_hpd_gpio, 0);
-
-	dst->src = NULL;
-	dssdev->dst = NULL;
-
-	in->ops.hdmi->disconnect(in, &ddata->dssdev);
-}
-
-static int tpd_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	in->ops.hdmi->set_timings(in, &ddata->timings);
-
-	r = in->ops.hdmi->enable(in);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return r;
-}
-
-static void tpd_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	in->ops.hdmi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void tpd_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->timings = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.hdmi->set_timings(in, timings);
-}
-
-static void tpd_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->timings;
-}
-
-static int tpd_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	r = in->ops.hdmi->check_timings(in, timings);
-
-	return r;
-}
-
-static int tpd_read_edid(struct omap_dss_device *dssdev,
-		u8 *edid, int len)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!gpio_get_value_cansleep(ddata->hpd_gpio))
-		return -ENODEV;
-
-	return in->ops.hdmi->read_edid(in, edid, len);
-}
-
-static bool tpd_detect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	return gpio_get_value_cansleep(ddata->hpd_gpio);
-}
-
-static int tpd_audio_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->audio_enable(in);
-}
-
-static void tpd_audio_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_disable(in);
-}
-
-static int tpd_audio_start(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->audio_start(in);
-}
-
-static void tpd_audio_stop(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_stop(in);
-}
-
-static bool tpd_audio_supported(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->audio_supported(in);
-}
-
-static int tpd_audio_config(struct omap_dss_device *dssdev,
-		struct omap_dss_audio *audio)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.hdmi->audio_config(in, audio);
-}
-
-static const struct omapdss_hdmi_ops tpd_hdmi_ops = {
-	.connect		= tpd_connect,
-	.disconnect		= tpd_disconnect,
-
-	.enable			= tpd_enable,
-	.disable		= tpd_disable,
-
-	.check_timings		= tpd_check_timings,
-	.set_timings		= tpd_set_timings,
-	.get_timings		= tpd_get_timings,
-
-	.read_edid		= tpd_read_edid,
-	.detect			= tpd_detect,
-
-	.audio_enable		= tpd_audio_enable,
-	.audio_disable		= tpd_audio_disable,
-	.audio_start		= tpd_audio_start,
-	.audio_stop		= tpd_audio_stop,
-	.audio_supported	= tpd_audio_supported,
-	.audio_config		= tpd_audio_config,
-};
-
-static int tpd_probe_pdata(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct encoder_tpd12s015_platform_data *pdata;
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	ddata->ct_cp_hpd_gpio = pdata->ct_cp_hpd_gpio;
-	ddata->ls_oe_gpio = pdata->ls_oe_gpio;
-	ddata->hpd_gpio = pdata->hpd_gpio;
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "Failed to find video source\n");
-		return -ENODEV;
-	}
-
-	ddata->in = in;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int tpd_probe_of(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct device_node *node = pdev->dev.of_node;
-	struct omap_dss_device *in;
-	int gpio;
-
-	/* CT CP HPD GPIO */
-	gpio = of_get_gpio(node, 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&pdev->dev, "failed to parse CT CP HPD gpio\n");
-		return gpio;
-	}
-	ddata->ct_cp_hpd_gpio = gpio;
-
-	/* LS OE GPIO */
-	gpio = of_get_gpio(node, 1);
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->ls_oe_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse LS OE gpio\n");
-		return gpio;
-	}
-
-	/* HPD GPIO */
-	gpio = of_get_gpio(node, 2);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&pdev->dev, "failed to parse HPD gpio\n");
-		return gpio;
-	}
-	ddata->hpd_gpio = gpio;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
-static int tpd_probe(struct platform_device *pdev)
-{
-	struct omap_dss_device *in, *dssdev;
-	struct panel_drv_data *ddata;
-	int r;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-
-	init_completion(&ddata->hpd_completion);
-
-	if (dev_get_platdata(&pdev->dev)) {
-		r = tpd_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = tpd_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	r = devm_gpio_request_one(&pdev->dev, ddata->ct_cp_hpd_gpio,
-			GPIOF_OUT_INIT_LOW, "hdmi_ct_cp_hpd");
-	if (r)
-		goto err_gpio;
-
-	if (gpio_is_valid(ddata->ls_oe_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->ls_oe_gpio,
-				GPIOF_OUT_INIT_LOW, "hdmi_ls_oe");
-		if (r)
-			goto err_gpio;
-	}
-
-	r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
-			GPIOF_DIR_IN, "hdmi_hpd");
-	if (r)
-		goto err_gpio;
-
-	r = devm_request_threaded_irq(&pdev->dev, gpio_to_irq(ddata->hpd_gpio),
-				 NULL, tpd_hpd_irq_handler,
-				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-				 IRQF_ONESHOT, "hpd", ddata);
-	if (r)
-		goto err_irq;
-
-	dssdev = &ddata->dssdev;
-	dssdev->ops.hdmi = &tpd_hdmi_ops;
-	dssdev->dev = &pdev->dev;
-	dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
-	dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
-	dssdev->owner = THIS_MODULE;
-
-	in = ddata->in;
-
-	r = omapdss_register_output(dssdev);
-	if (r) {
-		dev_err(&pdev->dev, "Failed to register output\n");
-		goto err_reg;
-	}
-
-	return 0;
-err_reg:
-err_irq:
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int __exit tpd_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	omapdss_unregister_output(&ddata->dssdev);
-
-	WARN_ON(omapdss_device_is_enabled(dssdev));
-	if (omapdss_device_is_enabled(dssdev))
-		tpd_disable(dssdev);
-
-	WARN_ON(omapdss_device_is_connected(dssdev));
-	if (omapdss_device_is_connected(dssdev))
-		tpd_disconnect(dssdev, dssdev->dst);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static const struct of_device_id tpd_of_match[] = {
-	{ .compatible = "omapdss,ti,tpd12s015", },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, tpd_of_match);
-
-static struct platform_driver tpd_driver = {
-	.probe	= tpd_probe,
-	.remove	= __exit_p(tpd_remove),
-	.driver	= {
-		.name	= "tpd12s015",
-		.owner	= THIS_MODULE,
-		.of_match_table = tpd_of_match,
-	},
-};
-
-module_platform_driver(tpd_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("TPD12S015 driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/panel-dpi.c b/drivers/video/omap2/displays-new/panel-dpi.c
deleted file mode 100644
index 5f8f7e7c81ef..000000000000
--- a/drivers/video/omap2/displays-new/panel-dpi.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Generic MIPI DPI Panel Driver
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	int data_lines;
-
-	struct omap_video_timings videomode;
-
-	int backlight_gpio;
-	int enable_gpio;
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int panel_dpi_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void panel_dpi_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dpi->disconnect(in, dssdev);
-}
-
-static int panel_dpi_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
-	in->ops.dpi->set_timings(in, &ddata->videomode);
-
-	r = in->ops.dpi->enable(in);
-	if (r)
-		return r;
-
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 1);
-
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void panel_dpi_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 0);
-
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
-	in->ops.dpi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void panel_dpi_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dpi->set_timings(in, timings);
-}
-
-static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->videomode;
-}
-
-static int panel_dpi_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, timings);
-}
-
-static struct omap_dss_driver panel_dpi_ops = {
-	.connect	= panel_dpi_connect,
-	.disconnect	= panel_dpi_disconnect,
-
-	.enable		= panel_dpi_enable,
-	.disable	= panel_dpi_disable,
-
-	.set_timings	= panel_dpi_set_timings,
-	.get_timings	= panel_dpi_get_timings,
-	.check_timings	= panel_dpi_check_timings,
-
-	.get_resolution	= omapdss_default_get_resolution,
-};
-
-static int panel_dpi_probe_pdata(struct platform_device *pdev)
-{
-	const struct panel_dpi_platform_data *pdata;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev, *in;
-	struct videomode vm;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	videomode_from_timing(pdata->display_timing, &vm);
-	videomode_to_omap_video_timings(&vm, &ddata->videomode);
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	ddata->enable_gpio = pdata->enable_gpio;
-	ddata->backlight_gpio = pdata->backlight_gpio;
-
-	return 0;
-}
-
-static int panel_dpi_probe(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-
-	if (dev_get_platdata(&pdev->dev)) {
-		r = panel_dpi_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->enable_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->enable_gpio,
-				GPIOF_OUT_INIT_LOW, "panel enable");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &pdev->dev;
-	dssdev->driver = &panel_dpi_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
-	dssdev->phy.dpi.data_lines = ddata->data_lines;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&pdev->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int __exit panel_dpi_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	omapdss_unregister_display(dssdev);
-
-	panel_dpi_disable(dssdev);
-	panel_dpi_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static struct platform_driver panel_dpi_driver = {
-	.probe = panel_dpi_probe,
-	.remove = __exit_p(panel_dpi_remove),
-	.driver = {
-		.name = "panel-dpi",
-		.owner = THIS_MODULE,
-	},
-};
-
-module_platform_driver(panel_dpi_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/omap2/displays-new/panel-dsi-cm.c
deleted file mode 100644
index d6f14e8717e8..000000000000
--- a/drivers/video/omap2/displays-new/panel-dsi-cm.c
+++ /dev/null
@@ -1,1388 +0,0 @@
-/*
- * Generic DSI Command Mode panel driver
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-/* #define DEBUG */
-
-#include <linux/backlight.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/jiffies.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/of_device.h>
-#include <linux/of_gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <video/mipi_display.h>
-
-/* DSI Virtual channel. Hardcoded for now. */
-#define TCH 0
-
-#define DCS_READ_NUM_ERRORS	0x05
-#define DCS_BRIGHTNESS		0x51
-#define DCS_CTRL_DISPLAY	0x53
-#define DCS_GET_ID1		0xda
-#define DCS_GET_ID2		0xdb
-#define DCS_GET_ID3		0xdc
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	struct omap_video_timings timings;
-
-	struct platform_device *pdev;
-
-	struct mutex lock;
-
-	struct backlight_device *bldev;
-
-	unsigned long	hw_guard_end;	/* next value of jiffies when we can
-					 * issue the next sleep in/out command
-					 */
-	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
-
-	/* panel HW configuration from DT or platform data */
-	int reset_gpio;
-	int ext_te_gpio;
-
-	bool use_dsi_backlight;
-
-	struct omap_dsi_pin_config pin_config;
-
-	/* runtime variables */
-	bool enabled;
-
-	bool te_enabled;
-
-	atomic_t do_update;
-	int channel;
-
-	struct delayed_work te_timeout_work;
-
-	bool intro_printed;
-
-	struct workqueue_struct *workqueue;
-
-	bool ulps_enabled;
-	unsigned ulps_timeout;
-	struct delayed_work ulps_work;
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static irqreturn_t dsicm_te_isr(int irq, void *data);
-static void dsicm_te_timeout_work_callback(struct work_struct *work);
-static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
-
-static int dsicm_panel_reset(struct panel_drv_data *ddata);
-
-static void dsicm_ulps_work(struct work_struct *work);
-
-static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
-{
-	ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
-	ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
-}
-
-static void hw_guard_wait(struct panel_drv_data *ddata)
-{
-	unsigned long wait = ddata->hw_guard_end - jiffies;
-
-	if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(wait);
-	}
-}
-
-static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data)
-{
-	struct omap_dss_device *in = ddata->in;
-	int r;
-	u8 buf[1];
-
-	r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, buf, 1);
-
-	if (r < 0)
-		return r;
-
-	*data = buf[0];
-
-	return 0;
-}
-
-static int dsicm_dcs_write_0(struct panel_drv_data *ddata, u8 dcs_cmd)
-{
-	struct omap_dss_device *in = ddata->in;
-	return in->ops.dsi->dcs_write(in, ddata->channel, &dcs_cmd, 1);
-}
-
-static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param)
-{
-	struct omap_dss_device *in = ddata->in;
-	u8 buf[2] = { dcs_cmd, param };
-
-	return in->ops.dsi->dcs_write(in, ddata->channel, buf, 2);
-}
-
-static int dsicm_sleep_in(struct panel_drv_data *ddata)
-
-{
-	struct omap_dss_device *in = ddata->in;
-	u8 cmd;
-	int r;
-
-	hw_guard_wait(ddata);
-
-	cmd = MIPI_DCS_ENTER_SLEEP_MODE;
-	r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, &cmd, 1);
-	if (r)
-		return r;
-
-	hw_guard_start(ddata, 120);
-
-	usleep_range(5000, 10000);
-
-	return 0;
-}
-
-static int dsicm_sleep_out(struct panel_drv_data *ddata)
-{
-	int r;
-
-	hw_guard_wait(ddata);
-
-	r = dsicm_dcs_write_0(ddata, MIPI_DCS_EXIT_SLEEP_MODE);
-	if (r)
-		return r;
-
-	hw_guard_start(ddata, 120);
-
-	usleep_range(5000, 10000);
-
-	return 0;
-}
-
-static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3)
-{
-	int r;
-
-	r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1);
-	if (r)
-		return r;
-	r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2);
-	if (r)
-		return r;
-	r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static int dsicm_set_update_window(struct panel_drv_data *ddata,
-		u16 x, u16 y, u16 w, u16 h)
-{
-	struct omap_dss_device *in = ddata->in;
-	int r;
-	u16 x1 = x;
-	u16 x2 = x + w - 1;
-	u16 y1 = y;
-	u16 y2 = y + h - 1;
-
-	u8 buf[5];
-	buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
-	buf[1] = (x1 >> 8) & 0xff;
-	buf[2] = (x1 >> 0) & 0xff;
-	buf[3] = (x2 >> 8) & 0xff;
-	buf[4] = (x2 >> 0) & 0xff;
-
-	r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
-	if (r)
-		return r;
-
-	buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
-	buf[1] = (y1 >> 8) & 0xff;
-	buf[2] = (y1 >> 0) & 0xff;
-	buf[3] = (y2 >> 8) & 0xff;
-	buf[4] = (y2 >> 0) & 0xff;
-
-	r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
-	if (r)
-		return r;
-
-	in->ops.dsi->bta_sync(in, ddata->channel);
-
-	return r;
-}
-
-static void dsicm_queue_ulps_work(struct panel_drv_data *ddata)
-{
-	if (ddata->ulps_timeout > 0)
-		queue_delayed_work(ddata->workqueue, &ddata->ulps_work,
-				msecs_to_jiffies(ddata->ulps_timeout));
-}
-
-static void dsicm_cancel_ulps_work(struct panel_drv_data *ddata)
-{
-	cancel_delayed_work(&ddata->ulps_work);
-}
-
-static int dsicm_enter_ulps(struct panel_drv_data *ddata)
-{
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (ddata->ulps_enabled)
-		return 0;
-
-	dsicm_cancel_ulps_work(ddata);
-
-	r = _dsicm_enable_te(ddata, false);
-	if (r)
-		goto err;
-
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		disable_irq(gpio_to_irq(ddata->ext_te_gpio));
-
-	in->ops.dsi->disable(in, false, true);
-
-	ddata->ulps_enabled = true;
-
-	return 0;
-
-err:
-	dev_err(&ddata->pdev->dev, "enter ULPS failed");
-	dsicm_panel_reset(ddata);
-
-	ddata->ulps_enabled = false;
-
-	dsicm_queue_ulps_work(ddata);
-
-	return r;
-}
-
-static int dsicm_exit_ulps(struct panel_drv_data *ddata)
-{
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!ddata->ulps_enabled)
-		return 0;
-
-	r = in->ops.dsi->enable(in);
-	if (r) {
-		dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
-		goto err1;
-	}
-
-	in->ops.dsi->enable_hs(in, ddata->channel, true);
-
-	r = _dsicm_enable_te(ddata, true);
-	if (r) {
-		dev_err(&ddata->pdev->dev, "failed to re-enable TE");
-		goto err2;
-	}
-
-	if (gpio_is_valid(ddata->ext_te_gpio))
-		enable_irq(gpio_to_irq(ddata->ext_te_gpio));
-
-	dsicm_queue_ulps_work(ddata);
-
-	ddata->ulps_enabled = false;
-
-	return 0;
-
-err2:
-	dev_err(&ddata->pdev->dev, "failed to exit ULPS");
-
-	r = dsicm_panel_reset(ddata);
-	if (!r) {
-		if (gpio_is_valid(ddata->ext_te_gpio))
-			enable_irq(gpio_to_irq(ddata->ext_te_gpio));
-		ddata->ulps_enabled = false;
-	}
-err1:
-	dsicm_queue_ulps_work(ddata);
-
-	return r;
-}
-
-static int dsicm_wake_up(struct panel_drv_data *ddata)
-{
-	if (ddata->ulps_enabled)
-		return dsicm_exit_ulps(ddata);
-
-	dsicm_cancel_ulps_work(ddata);
-	dsicm_queue_ulps_work(ddata);
-	return 0;
-}
-
-static int dsicm_bl_update_status(struct backlight_device *dev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-	int level;
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		level = dev->props.brightness;
-	else
-		level = 0;
-
-	dev_dbg(&ddata->pdev->dev, "update brightness to %d\n", level);
-
-	mutex_lock(&ddata->lock);
-
-	if (ddata->enabled) {
-		in->ops.dsi->bus_lock(in);
-
-		r = dsicm_wake_up(ddata);
-		if (!r)
-			r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, level);
-
-		in->ops.dsi->bus_unlock(in);
-	} else {
-		r = 0;
-	}
-
-	mutex_unlock(&ddata->lock);
-
-	return r;
-}
-
-static int dsicm_bl_get_intensity(struct backlight_device *dev)
-{
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		return dev->props.brightness;
-
-	return 0;
-}
-
-static const struct backlight_ops dsicm_bl_ops = {
-	.get_brightness = dsicm_bl_get_intensity,
-	.update_status  = dsicm_bl_update_status,
-};
-
-static void dsicm_get_resolution(struct omap_dss_device *dssdev,
-		u16 *xres, u16 *yres)
-{
-	*xres = dssdev->panel.timings.x_res;
-	*yres = dssdev->panel.timings.y_res;
-}
-
-static ssize_t dsicm_num_errors_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *in = ddata->in;
-	u8 errors = 0;
-	int r;
-
-	mutex_lock(&ddata->lock);
-
-	if (ddata->enabled) {
-		in->ops.dsi->bus_lock(in);
-
-		r = dsicm_wake_up(ddata);
-		if (!r)
-			r = dsicm_dcs_read_1(ddata, DCS_READ_NUM_ERRORS,
-					&errors);
-
-		in->ops.dsi->bus_unlock(in);
-	} else {
-		r = -ENODEV;
-	}
-
-	mutex_unlock(&ddata->lock);
-
-	if (r)
-		return r;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", errors);
-}
-
-static ssize_t dsicm_hw_revision_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *in = ddata->in;
-	u8 id1, id2, id3;
-	int r;
-
-	mutex_lock(&ddata->lock);
-
-	if (ddata->enabled) {
-		in->ops.dsi->bus_lock(in);
-
-		r = dsicm_wake_up(ddata);
-		if (!r)
-			r = dsicm_get_id(ddata, &id1, &id2, &id3);
-
-		in->ops.dsi->bus_unlock(in);
-	} else {
-		r = -ENODEV;
-	}
-
-	mutex_unlock(&ddata->lock);
-
-	if (r)
-		return r;
-
-	return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
-}
-
-static ssize_t dsicm_store_ulps(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *in = ddata->in;
-	unsigned long t;
-	int r;
-
-	r = kstrtoul(buf, 0, &t);
-	if (r)
-		return r;
-
-	mutex_lock(&ddata->lock);
-
-	if (ddata->enabled) {
-		in->ops.dsi->bus_lock(in);
-
-		if (t)
-			r = dsicm_enter_ulps(ddata);
-		else
-			r = dsicm_wake_up(ddata);
-
-		in->ops.dsi->bus_unlock(in);
-	}
-
-	mutex_unlock(&ddata->lock);
-
-	if (r)
-		return r;
-
-	return count;
-}
-
-static ssize_t dsicm_show_ulps(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	unsigned t;
-
-	mutex_lock(&ddata->lock);
-	t = ddata->ulps_enabled;
-	mutex_unlock(&ddata->lock);
-
-	return snprintf(buf, PAGE_SIZE, "%u\n", t);
-}
-
-static ssize_t dsicm_store_ulps_timeout(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *in = ddata->in;
-	unsigned long t;
-	int r;
-
-	r = kstrtoul(buf, 0, &t);
-	if (r)
-		return r;
-
-	mutex_lock(&ddata->lock);
-	ddata->ulps_timeout = t;
-
-	if (ddata->enabled) {
-		/* dsicm_wake_up will restart the timer */
-		in->ops.dsi->bus_lock(in);
-		r = dsicm_wake_up(ddata);
-		in->ops.dsi->bus_unlock(in);
-	}
-
-	mutex_unlock(&ddata->lock);
-
-	if (r)
-		return r;
-
-	return count;
-}
-
-static ssize_t dsicm_show_ulps_timeout(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	unsigned t;
-
-	mutex_lock(&ddata->lock);
-	t = ddata->ulps_timeout;
-	mutex_unlock(&ddata->lock);
-
-	return snprintf(buf, PAGE_SIZE, "%u\n", t);
-}
-
-static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL);
-static DEVICE_ATTR(hw_revision, S_IRUGO, dsicm_hw_revision_show, NULL);
-static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR,
-		dsicm_show_ulps, dsicm_store_ulps);
-static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR,
-		dsicm_show_ulps_timeout, dsicm_store_ulps_timeout);
-
-static struct attribute *dsicm_attrs[] = {
-	&dev_attr_num_dsi_errors.attr,
-	&dev_attr_hw_revision.attr,
-	&dev_attr_ulps.attr,
-	&dev_attr_ulps_timeout.attr,
-	NULL,
-};
-
-static struct attribute_group dsicm_attr_group = {
-	.attrs = dsicm_attrs,
-};
-
-static void dsicm_hw_reset(struct panel_drv_data *ddata)
-{
-	if (!gpio_is_valid(ddata->reset_gpio))
-		return;
-
-	gpio_set_value(ddata->reset_gpio, 1);
-	udelay(10);
-	/* reset the panel */
-	gpio_set_value(ddata->reset_gpio, 0);
-	/* assert reset */
-	udelay(10);
-	gpio_set_value(ddata->reset_gpio, 1);
-	/* wait after releasing reset */
-	usleep_range(5000, 10000);
-}
-
-static int dsicm_power_on(struct panel_drv_data *ddata)
-{
-	struct omap_dss_device *in = ddata->in;
-	u8 id1, id2, id3;
-	int r;
-	struct omap_dss_dsi_config dsi_config = {
-		.mode = OMAP_DSS_DSI_CMD_MODE,
-		.pixel_format = OMAP_DSS_DSI_FMT_RGB888,
-		.timings = &ddata->timings,
-		.hs_clk_min = 150000000,
-		.hs_clk_max = 300000000,
-		.lp_clk_min = 7000000,
-		.lp_clk_max = 10000000,
-	};
-
-	if (ddata->pin_config.num_pins > 0) {
-		r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
-		if (r) {
-			dev_err(&ddata->pdev->dev,
-				"failed to configure DSI pins\n");
-			goto err0;
-		}
-	}
-
-	r = in->ops.dsi->set_config(in, &dsi_config);
-	if (r) {
-		dev_err(&ddata->pdev->dev, "failed to configure DSI\n");
-		goto err0;
-	}
-
-	r = in->ops.dsi->enable(in);
-	if (r) {
-		dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
-		goto err0;
-	}
-
-	dsicm_hw_reset(ddata);
-
-	in->ops.dsi->enable_hs(in, ddata->channel, false);
-
-	r = dsicm_sleep_out(ddata);
-	if (r)
-		goto err;
-
-	r = dsicm_get_id(ddata, &id1, &id2, &id3);
-	if (r)
-		goto err;
-
-	r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff);
-	if (r)
-		goto err;
-
-	r = dsicm_dcs_write_1(ddata, DCS_CTRL_DISPLAY,
-			(1<<2) | (1<<5));	/* BL | BCTRL */
-	if (r)
-		goto err;
-
-	r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_PIXEL_FORMAT,
-		MIPI_DCS_PIXEL_FMT_24BIT);
-	if (r)
-		goto err;
-
-	r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_ON);
-	if (r)
-		goto err;
-
-	r = _dsicm_enable_te(ddata, ddata->te_enabled);
-	if (r)
-		goto err;
-
-	r = in->ops.dsi->enable_video_output(in, ddata->channel);
-	if (r)
-		goto err;
-
-	ddata->enabled = 1;
-
-	if (!ddata->intro_printed) {
-		dev_info(&ddata->pdev->dev, "panel revision %02x.%02x.%02x\n",
-			id1, id2, id3);
-		ddata->intro_printed = true;
-	}
-
-	in->ops.dsi->enable_hs(in, ddata->channel, true);
-
-	return 0;
-err:
-	dev_err(&ddata->pdev->dev, "error while enabling panel, issuing HW reset\n");
-
-	dsicm_hw_reset(ddata);
-
-	in->ops.dsi->disable(in, true, false);
-err0:
-	return r;
-}
-
-static void dsicm_power_off(struct panel_drv_data *ddata)
-{
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	in->ops.dsi->disable_video_output(in, ddata->channel);
-
-	r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_OFF);
-	if (!r)
-		r = dsicm_sleep_in(ddata);
-
-	if (r) {
-		dev_err(&ddata->pdev->dev,
-				"error disabling panel, issuing HW reset\n");
-		dsicm_hw_reset(ddata);
-	}
-
-	in->ops.dsi->disable(in, true, false);
-
-	ddata->enabled = 0;
-}
-
-static int dsicm_panel_reset(struct panel_drv_data *ddata)
-{
-	dev_err(&ddata->pdev->dev, "performing LCD reset\n");
-
-	dsicm_power_off(ddata);
-	dsicm_hw_reset(ddata);
-	return dsicm_power_on(ddata);
-}
-
-static int dsicm_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	struct device *dev = &ddata->pdev->dev;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dsi->connect(in, dssdev);
-	if (r) {
-		dev_err(dev, "Failed to connect to video source\n");
-		return r;
-	}
-
-	r = in->ops.dsi->request_vc(ddata->in, &ddata->channel);
-	if (r) {
-		dev_err(dev, "failed to get virtual channel\n");
-		goto err_req_vc;
-	}
-
-	r = in->ops.dsi->set_vc_id(ddata->in, ddata->channel, TCH);
-	if (r) {
-		dev_err(dev, "failed to set VC_ID\n");
-		goto err_vc_id;
-	}
-
-	return 0;
-
-err_vc_id:
-	in->ops.dsi->release_vc(ddata->in, ddata->channel);
-err_req_vc:
-	in->ops.dsi->disconnect(in, dssdev);
-	return r;
-}
-
-static void dsicm_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dsi->release_vc(in, ddata->channel);
-	in->ops.dsi->disconnect(in, dssdev);
-}
-
-static int dsicm_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	dev_dbg(&ddata->pdev->dev, "enable\n");
-
-	mutex_lock(&ddata->lock);
-
-	if (!omapdss_device_is_connected(dssdev)) {
-		r = -ENODEV;
-		goto err;
-	}
-
-	if (omapdss_device_is_enabled(dssdev)) {
-		r = 0;
-		goto err;
-	}
-
-	in->ops.dsi->bus_lock(in);
-
-	r = dsicm_power_on(ddata);
-
-	in->ops.dsi->bus_unlock(in);
-
-	if (r)
-		goto err;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	mutex_unlock(&ddata->lock);
-
-	return 0;
-err:
-	dev_dbg(&ddata->pdev->dev, "enable failed\n");
-	mutex_unlock(&ddata->lock);
-	return r;
-}
-
-static void dsicm_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	dev_dbg(&ddata->pdev->dev, "disable\n");
-
-	mutex_lock(&ddata->lock);
-
-	dsicm_cancel_ulps_work(ddata);
-
-	in->ops.dsi->bus_lock(in);
-
-	if (omapdss_device_is_enabled(dssdev)) {
-		r = dsicm_wake_up(ddata);
-		if (!r)
-			dsicm_power_off(ddata);
-	}
-
-	in->ops.dsi->bus_unlock(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
-	mutex_unlock(&ddata->lock);
-}
-
-static void dsicm_framedone_cb(int err, void *data)
-{
-	struct panel_drv_data *ddata = data;
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(&ddata->pdev->dev, "framedone, err %d\n", err);
-	in->ops.dsi->bus_unlock(ddata->in);
-}
-
-static irqreturn_t dsicm_te_isr(int irq, void *data)
-{
-	struct panel_drv_data *ddata = data;
-	struct omap_dss_device *in = ddata->in;
-	int old;
-	int r;
-
-	old = atomic_cmpxchg(&ddata->do_update, 1, 0);
-
-	if (old) {
-		cancel_delayed_work(&ddata->te_timeout_work);
-
-		r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
-				ddata);
-		if (r)
-			goto err;
-	}
-
-	return IRQ_HANDLED;
-err:
-	dev_err(&ddata->pdev->dev, "start update failed\n");
-	in->ops.dsi->bus_unlock(in);
-	return IRQ_HANDLED;
-}
-
-static void dsicm_te_timeout_work_callback(struct work_struct *work)
-{
-	struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
-					te_timeout_work.work);
-	struct omap_dss_device *in = ddata->in;
-
-	dev_err(&ddata->pdev->dev, "TE not received for 250ms!\n");
-
-	atomic_set(&ddata->do_update, 0);
-	in->ops.dsi->bus_unlock(in);
-}
-
-static int dsicm_update(struct omap_dss_device *dssdev,
-				    u16 x, u16 y, u16 w, u16 h)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	dev_dbg(&ddata->pdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
-
-	mutex_lock(&ddata->lock);
-	in->ops.dsi->bus_lock(in);
-
-	r = dsicm_wake_up(ddata);
-	if (r)
-		goto err;
-
-	if (!ddata->enabled) {
-		r = 0;
-		goto err;
-	}
-
-	/* XXX no need to send this every frame, but dsi break if not done */
-	r = dsicm_set_update_window(ddata, 0, 0,
-			dssdev->panel.timings.x_res,
-			dssdev->panel.timings.y_res);
-	if (r)
-		goto err;
-
-	if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) {
-		schedule_delayed_work(&ddata->te_timeout_work,
-				msecs_to_jiffies(250));
-		atomic_set(&ddata->do_update, 1);
-	} else {
-		r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
-				ddata);
-		if (r)
-			goto err;
-	}
-
-	/* note: no bus_unlock here. unlock is in framedone_cb */
-	mutex_unlock(&ddata->lock);
-	return 0;
-err:
-	in->ops.dsi->bus_unlock(in);
-	mutex_unlock(&ddata->lock);
-	return r;
-}
-
-static int dsicm_sync(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(&ddata->pdev->dev, "sync\n");
-
-	mutex_lock(&ddata->lock);
-	in->ops.dsi->bus_lock(in);
-	in->ops.dsi->bus_unlock(in);
-	mutex_unlock(&ddata->lock);
-
-	dev_dbg(&ddata->pdev->dev, "sync done\n");
-
-	return 0;
-}
-
-static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
-{
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (enable)
-		r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_TEAR_ON, 0);
-	else
-		r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
-
-	if (!gpio_is_valid(ddata->ext_te_gpio))
-		in->ops.dsi->enable_te(in, enable);
-
-	/* possible panel bug */
-	msleep(100);
-
-	return r;
-}
-
-static int dsicm_enable_te(struct omap_dss_device *dssdev, bool enable)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	mutex_lock(&ddata->lock);
-
-	if (ddata->te_enabled == enable)
-		goto end;
-
-	in->ops.dsi->bus_lock(in);
-
-	if (ddata->enabled) {
-		r = dsicm_wake_up(ddata);
-		if (r)
-			goto err;
-
-		r = _dsicm_enable_te(ddata, enable);
-		if (r)
-			goto err;
-	}
-
-	ddata->te_enabled = enable;
-
-	in->ops.dsi->bus_unlock(in);
-end:
-	mutex_unlock(&ddata->lock);
-
-	return 0;
-err:
-	in->ops.dsi->bus_unlock(in);
-	mutex_unlock(&ddata->lock);
-
-	return r;
-}
-
-static int dsicm_get_te(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	int r;
-
-	mutex_lock(&ddata->lock);
-	r = ddata->te_enabled;
-	mutex_unlock(&ddata->lock);
-
-	return r;
-}
-
-static int dsicm_memory_read(struct omap_dss_device *dssdev,
-		void *buf, size_t size,
-		u16 x, u16 y, u16 w, u16 h)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-	int first = 1;
-	int plen;
-	unsigned buf_used = 0;
-
-	if (size < w * h * 3)
-		return -ENOMEM;
-
-	mutex_lock(&ddata->lock);
-
-	if (!ddata->enabled) {
-		r = -ENODEV;
-		goto err1;
-	}
-
-	size = min(w * h * 3,
-			dssdev->panel.timings.x_res *
-			dssdev->panel.timings.y_res * 3);
-
-	in->ops.dsi->bus_lock(in);
-
-	r = dsicm_wake_up(ddata);
-	if (r)
-		goto err2;
-
-	/* plen 1 or 2 goes into short packet. until checksum error is fixed,
-	 * use short packets. plen 32 works, but bigger packets seem to cause
-	 * an error. */
-	if (size % 2)
-		plen = 1;
-	else
-		plen = 2;
-
-	dsicm_set_update_window(ddata, x, y, w, h);
-
-	r = in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, plen);
-	if (r)
-		goto err2;
-
-	while (buf_used < size) {
-		u8 dcs_cmd = first ? 0x2e : 0x3e;
-		first = 0;
-
-		r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd,
-				buf + buf_used, size - buf_used);
-
-		if (r < 0) {
-			dev_err(dssdev->dev, "read error\n");
-			goto err3;
-		}
-
-		buf_used += r;
-
-		if (r < plen) {
-			dev_err(&ddata->pdev->dev, "short read\n");
-			break;
-		}
-
-		if (signal_pending(current)) {
-			dev_err(&ddata->pdev->dev, "signal pending, "
-					"aborting memory read\n");
-			r = -ERESTARTSYS;
-			goto err3;
-		}
-	}
-
-	r = buf_used;
-
-err3:
-	in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, 1);
-err2:
-	in->ops.dsi->bus_unlock(in);
-err1:
-	mutex_unlock(&ddata->lock);
-	return r;
-}
-
-static void dsicm_ulps_work(struct work_struct *work)
-{
-	struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
-			ulps_work.work);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	mutex_lock(&ddata->lock);
-
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !ddata->enabled) {
-		mutex_unlock(&ddata->lock);
-		return;
-	}
-
-	in->ops.dsi->bus_lock(in);
-
-	dsicm_enter_ulps(ddata);
-
-	in->ops.dsi->bus_unlock(in);
-	mutex_unlock(&ddata->lock);
-}
-
-static struct omap_dss_driver dsicm_ops = {
-	.connect	= dsicm_connect,
-	.disconnect	= dsicm_disconnect,
-
-	.enable		= dsicm_enable,
-	.disable	= dsicm_disable,
-
-	.update		= dsicm_update,
-	.sync		= dsicm_sync,
-
-	.get_resolution	= dsicm_get_resolution,
-	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
-
-	.enable_te	= dsicm_enable_te,
-	.get_te		= dsicm_get_te,
-
-	.memory_read	= dsicm_memory_read,
-};
-
-static int dsicm_probe_pdata(struct platform_device *pdev)
-{
-	const struct panel_dsicm_platform_data *pdata;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return -EPROBE_DEFER;
-	}
-	ddata->in = in;
-
-	ddata->reset_gpio = pdata->reset_gpio;
-
-	if (pdata->use_ext_te)
-		ddata->ext_te_gpio = pdata->ext_te_gpio;
-	else
-		ddata->ext_te_gpio = -1;
-
-	ddata->ulps_timeout = pdata->ulps_timeout;
-
-	ddata->use_dsi_backlight = pdata->use_dsi_backlight;
-
-	ddata->pin_config = pdata->pin_config;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int dsicm_probe_of(struct platform_device *pdev)
-{
-	struct device_node *node = pdev->dev.of_node;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *in;
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&pdev->dev, "failed to parse reset gpio\n");
-		return gpio;
-	}
-	ddata->reset_gpio = gpio;
-
-	gpio = of_get_named_gpio(node, "te-gpios", 0);
-	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
-		ddata->ext_te_gpio = gpio;
-	} else {
-		dev_err(&pdev->dev, "failed to parse TE gpio\n");
-		return gpio;
-	}
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&pdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	/* TODO: ulps, backlight */
-
-	return 0;
-}
-
-static int dsicm_probe(struct platform_device *pdev)
-{
-	struct backlight_properties props;
-	struct panel_drv_data *ddata;
-	struct backlight_device *bldev = NULL;
-	struct device *dev = &pdev->dev;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	dev_dbg(dev, "probe\n");
-
-	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-	ddata->pdev = pdev;
-
-	if (dev_get_platdata(dev)) {
-		r = dsicm_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else if (pdev->dev.of_node) {
-		r = dsicm_probe_of(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	ddata->timings.x_res = 864;
-	ddata->timings.y_res = 480;
-	ddata->timings.pixelclock = 864 * 480 * 60;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = dev;
-	dssdev->driver = &dsicm_ops;
-	dssdev->panel.timings = ddata->timings;
-	dssdev->type = OMAP_DISPLAY_TYPE_DSI;
-	dssdev->owner = THIS_MODULE;
-
-	dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
-	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
-		OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	mutex_init(&ddata->lock);
-
-	atomic_set(&ddata->do_update, 0);
-
-	if (gpio_is_valid(ddata->reset_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "taal rst");
-		if (r) {
-			dev_err(dev, "failed to request reset gpio\n");
-			return r;
-		}
-	}
-
-	if (gpio_is_valid(ddata->ext_te_gpio)) {
-		r = devm_gpio_request_one(dev, ddata->ext_te_gpio,
-				GPIOF_IN, "taal irq");
-		if (r) {
-			dev_err(dev, "GPIO request failed\n");
-			return r;
-		}
-
-		r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio),
-				dsicm_te_isr,
-				IRQF_TRIGGER_RISING,
-				"taal vsync", ddata);
-
-		if (r) {
-			dev_err(dev, "IRQ request failed\n");
-			return r;
-		}
-
-		INIT_DEFERRABLE_WORK(&ddata->te_timeout_work,
-					dsicm_te_timeout_work_callback);
-
-		dev_dbg(dev, "Using GPIO TE\n");
-	}
-
-	ddata->workqueue = create_singlethread_workqueue("dsicm_wq");
-	if (ddata->workqueue == NULL) {
-		dev_err(dev, "can't create workqueue\n");
-		return -ENOMEM;
-	}
-	INIT_DELAYED_WORK(&ddata->ulps_work, dsicm_ulps_work);
-
-	dsicm_hw_reset(ddata);
-
-	if (ddata->use_dsi_backlight) {
-		memset(&props, 0, sizeof(struct backlight_properties));
-		props.max_brightness = 255;
-
-		props.type = BACKLIGHT_RAW;
-		bldev = backlight_device_register(dev_name(dev),
-				dev, ddata, &dsicm_bl_ops, &props);
-		if (IS_ERR(bldev)) {
-			r = PTR_ERR(bldev);
-			goto err_bl;
-		}
-
-		ddata->bldev = bldev;
-
-		bldev->props.fb_blank = FB_BLANK_UNBLANK;
-		bldev->props.power = FB_BLANK_UNBLANK;
-		bldev->props.brightness = 255;
-
-		dsicm_bl_update_status(bldev);
-	}
-
-	r = sysfs_create_group(&dev->kobj, &dsicm_attr_group);
-	if (r) {
-		dev_err(dev, "failed to create sysfs files\n");
-		goto err_sysfs_create;
-	}
-
-	return 0;
-
-err_sysfs_create:
-	if (bldev != NULL)
-		backlight_device_unregister(bldev);
-err_bl:
-	destroy_workqueue(ddata->workqueue);
-err_reg:
-	return r;
-}
-
-static int __exit dsicm_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct backlight_device *bldev;
-
-	dev_dbg(&pdev->dev, "remove\n");
-
-	omapdss_unregister_display(dssdev);
-
-	dsicm_disable(dssdev);
-	dsicm_disconnect(dssdev);
-
-	sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group);
-
-	bldev = ddata->bldev;
-	if (bldev != NULL) {
-		bldev->props.power = FB_BLANK_POWERDOWN;
-		dsicm_bl_update_status(bldev);
-		backlight_device_unregister(bldev);
-	}
-
-	omap_dss_put_device(ddata->in);
-
-	dsicm_cancel_ulps_work(ddata);
-	destroy_workqueue(ddata->workqueue);
-
-	/* reset, to be sure that the panel is in a valid state */
-	dsicm_hw_reset(ddata);
-
-	return 0;
-}
-
-static const struct of_device_id dsicm_of_match[] = {
-	{ .compatible = "omapdss,panel-dsi-cm", },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, dsicm_of_match);
-
-static struct platform_driver dsicm_driver = {
-	.probe = dsicm_probe,
-	.remove = __exit_p(dsicm_remove),
-	.driver = {
-		.name = "panel-dsi-cm",
-		.owner = THIS_MODULE,
-		.of_match_table = dsicm_of_match,
-	},
-};
-
-module_platform_driver(dsicm_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
deleted file mode 100644
index 2e6b513222d9..000000000000
--- a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * LG.Philips LB035Q02 LCD Panel driver
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- * Based on a driver by: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-static struct omap_video_timings lb035q02_timings = {
-	.x_res = 320,
-	.y_res = 240,
-
-	.pixelclock	= 6500000,
-
-	.hsw		= 2,
-	.hfp		= 20,
-	.hbp		= 68,
-
-	.vsw		= 2,
-	.vfp		= 4,
-	.vbp		= 18,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	struct spi_device *spi;
-
-	int data_lines;
-
-	struct omap_video_timings videomode;
-
-	int reset_gpio;
-	int backlight_gpio;
-	int enable_gpio;
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
-{
-	struct spi_message msg;
-	struct spi_transfer index_xfer = {
-		.len		= 3,
-		.cs_change	= 1,
-	};
-	struct spi_transfer value_xfer = {
-		.len		= 3,
-	};
-	u8	buffer[16];
-
-	spi_message_init(&msg);
-
-	/* register index */
-	buffer[0] = 0x70;
-	buffer[1] = 0x00;
-	buffer[2] = reg & 0x7f;
-	index_xfer.tx_buf = buffer;
-	spi_message_add_tail(&index_xfer, &msg);
-
-	/* register value */
-	buffer[4] = 0x72;
-	buffer[5] = val >> 8;
-	buffer[6] = val;
-	value_xfer.tx_buf = buffer + 4;
-	spi_message_add_tail(&value_xfer, &msg);
-
-	return spi_sync(spi, &msg);
-}
-
-static void init_lb035q02_panel(struct spi_device *spi)
-{
-	/* Init sequence from page 28 of the lb035q02 spec */
-	lb035q02_write_reg(spi, 0x01, 0x6300);
-	lb035q02_write_reg(spi, 0x02, 0x0200);
-	lb035q02_write_reg(spi, 0x03, 0x0177);
-	lb035q02_write_reg(spi, 0x04, 0x04c7);
-	lb035q02_write_reg(spi, 0x05, 0xffc0);
-	lb035q02_write_reg(spi, 0x06, 0xe806);
-	lb035q02_write_reg(spi, 0x0a, 0x4008);
-	lb035q02_write_reg(spi, 0x0b, 0x0000);
-	lb035q02_write_reg(spi, 0x0d, 0x0030);
-	lb035q02_write_reg(spi, 0x0e, 0x2800);
-	lb035q02_write_reg(spi, 0x0f, 0x0000);
-	lb035q02_write_reg(spi, 0x16, 0x9f80);
-	lb035q02_write_reg(spi, 0x17, 0x0a0f);
-	lb035q02_write_reg(spi, 0x1e, 0x00c1);
-	lb035q02_write_reg(spi, 0x30, 0x0300);
-	lb035q02_write_reg(spi, 0x31, 0x0007);
-	lb035q02_write_reg(spi, 0x32, 0x0000);
-	lb035q02_write_reg(spi, 0x33, 0x0000);
-	lb035q02_write_reg(spi, 0x34, 0x0707);
-	lb035q02_write_reg(spi, 0x35, 0x0004);
-	lb035q02_write_reg(spi, 0x36, 0x0302);
-	lb035q02_write_reg(spi, 0x37, 0x0202);
-	lb035q02_write_reg(spi, 0x3a, 0x0a0d);
-	lb035q02_write_reg(spi, 0x3b, 0x0806);
-}
-
-static int lb035q02_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	init_lb035q02_panel(ddata->spi);
-
-	return 0;
-}
-
-static void lb035q02_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dpi->disconnect(in, dssdev);
-}
-
-static int lb035q02_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
-	in->ops.dpi->set_timings(in, &ddata->videomode);
-
-	r = in->ops.dpi->enable(in);
-	if (r)
-		return r;
-
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 1);
-
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void lb035q02_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 0);
-
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
-	in->ops.dpi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void lb035q02_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dpi->set_timings(in, timings);
-}
-
-static void lb035q02_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->videomode;
-}
-
-static int lb035q02_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, timings);
-}
-
-static struct omap_dss_driver lb035q02_ops = {
-	.connect	= lb035q02_connect,
-	.disconnect	= lb035q02_disconnect,
-
-	.enable		= lb035q02_enable,
-	.disable	= lb035q02_disable,
-
-	.set_timings	= lb035q02_set_timings,
-	.get_timings	= lb035q02_get_timings,
-	.check_timings	= lb035q02_check_timings,
-
-	.get_resolution	= omapdss_default_get_resolution,
-};
-
-static int lb035q02_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_lb035q02_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	ddata->enable_gpio = pdata->enable_gpio;
-	ddata->backlight_gpio = pdata->backlight_gpio;
-
-	return 0;
-}
-
-static int lb035q02_panel_spi_probe(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, ddata);
-
-	ddata->spi = spi;
-
-	if (dev_get_platdata(&spi->dev)) {
-		r = lb035q02_probe_pdata(spi);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->enable_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio,
-				GPIOF_OUT_INIT_LOW, "panel enable");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
-
-	ddata->videomode = lb035q02_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &spi->dev;
-	dssdev->driver = &lb035q02_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
-	dssdev->phy.dpi.data_lines = ddata->data_lines;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&spi->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int lb035q02_panel_spi_remove(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	omapdss_unregister_display(dssdev);
-
-	lb035q02_disable(dssdev);
-	lb035q02_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static struct spi_driver lb035q02_spi_driver = {
-	.probe		= lb035q02_panel_spi_probe,
-	.remove		= lb035q02_panel_spi_remove,
-	.driver		= {
-		.name	= "panel_lgphilips_lb035q02",
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_spi_driver(lb035q02_spi_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c b/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c
deleted file mode 100644
index 996fa004b48c..000000000000
--- a/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * NEC NL8048HL11 Panel driver
- *
- * Copyright (C) 2010 Texas Instruments Inc.
- * Author: Erik Gilling <konkers@android.com>
- * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-struct panel_drv_data {
-	struct omap_dss_device	dssdev;
-	struct omap_dss_device *in;
-
-	struct omap_video_timings videomode;
-
-	int data_lines;
-
-	int res_gpio;
-	int qvga_gpio;
-
-	struct spi_device *spi;
-};
-
-#define LCD_XRES		800
-#define LCD_YRES		480
-/*
- * NEC PIX Clock Ratings
- * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
- */
-#define LCD_PIXEL_CLOCK		23800000
-
-static const struct {
-	unsigned char addr;
-	unsigned char dat;
-} nec_8048_init_seq[] = {
-	{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
-	{ 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
-	{ 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 },	{ 24, 0x25 },
-	{ 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
-	{ 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F },	{ 38, 0x0F },
-	{ 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 },	{ 43, 0x0F },
-	{ 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F },	{ 48, 0x0F },
-	{ 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
-	{ 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 },	{ 86, 0x14 },
-	{ 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 },	{ 93, 0x0C },
-	{ 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
-	{ 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
-	{ 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
-	{ 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
-	{ 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
-	{ 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
-	{ 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
-	{ 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
-};
-
-static const struct omap_video_timings nec_8048_panel_timings = {
-	.x_res		= LCD_XRES,
-	.y_res		= LCD_YRES,
-	.pixelclock	= LCD_PIXEL_CLOCK,
-	.hfp		= 6,
-	.hsw		= 1,
-	.hbp		= 4,
-	.vfp		= 3,
-	.vsw		= 1,
-	.vbp		= 4,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
-			unsigned char reg_data)
-{
-	int ret = 0;
-	unsigned int cmd = 0, data = 0;
-
-	cmd = 0x0000 | reg_addr; /* register address write */
-	data = 0x0100 | reg_data; /* register data write */
-	data = (cmd << 16) | data;
-
-	ret = spi_write(spi, (unsigned char *)&data, 4);
-	if (ret)
-		pr_err("error in spi_write %x\n", data);
-
-	return ret;
-}
-
-static int init_nec_8048_wvga_lcd(struct spi_device *spi)
-{
-	unsigned int i;
-	/* Initialization Sequence */
-	/* nec_8048_spi_send(spi, REG, VAL) */
-	for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
-		nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
-				nec_8048_init_seq[i].dat);
-	udelay(20);
-	nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
-				nec_8048_init_seq[i].dat);
-	return 0;
-}
-
-static int nec_8048_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void nec_8048_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dpi->disconnect(in, dssdev);
-}
-
-static int nec_8048_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
-	in->ops.dpi->set_timings(in, &ddata->videomode);
-
-	r = in->ops.dpi->enable(in);
-	if (r)
-		return r;
-
-	if (gpio_is_valid(ddata->res_gpio))
-		gpio_set_value_cansleep(ddata->res_gpio, 1);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void nec_8048_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	if (gpio_is_valid(ddata->res_gpio))
-		gpio_set_value_cansleep(ddata->res_gpio, 0);
-
-	in->ops.dpi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void nec_8048_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dpi->set_timings(in, timings);
-}
-
-static void nec_8048_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->videomode;
-}
-
-static int nec_8048_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, timings);
-}
-
-static struct omap_dss_driver nec_8048_ops = {
-	.connect	= nec_8048_connect,
-	.disconnect	= nec_8048_disconnect,
-
-	.enable		= nec_8048_enable,
-	.disable	= nec_8048_disable,
-
-	.set_timings	= nec_8048_set_timings,
-	.get_timings	= nec_8048_get_timings,
-	.check_timings	= nec_8048_check_timings,
-
-	.get_resolution	= omapdss_default_get_resolution,
-};
-
-
-static int nec_8048_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_nec_nl8048hl11_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	ddata->qvga_gpio = pdata->qvga_gpio;
-	ddata->res_gpio = pdata->res_gpio;
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int nec_8048_probe(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	dev_dbg(&spi->dev, "%s\n", __func__);
-
-	spi->mode = SPI_MODE_0;
-	spi->bits_per_word = 32;
-
-	r = spi_setup(spi);
-	if (r < 0) {
-		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
-		return r;
-	}
-
-	init_nec_8048_wvga_lcd(spi);
-
-	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, ddata);
-
-	ddata->spi = spi;
-
-	if (dev_get_platdata(&spi->dev)) {
-		r = nec_8048_probe_pdata(spi);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->qvga_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->res_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->res_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd RES");
-		if (r)
-			goto err_gpio;
-	}
-
-	ddata->videomode = nec_8048_panel_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &spi->dev;
-	dssdev->driver = &nec_8048_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&spi->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int nec_8048_remove(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
-	omapdss_unregister_display(dssdev);
-
-	nec_8048_disable(dssdev);
-	nec_8048_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int nec_8048_suspend(struct device *dev)
-{
-	struct spi_device *spi = to_spi_device(dev);
-
-	nec_8048_spi_send(spi, 2, 0x01);
-	mdelay(40);
-
-	return 0;
-}
-
-static int nec_8048_resume(struct device *dev)
-{
-	struct spi_device *spi = to_spi_device(dev);
-
-	/* reinitialize the panel */
-	spi_setup(spi);
-	nec_8048_spi_send(spi, 2, 0x00);
-	init_nec_8048_wvga_lcd(spi);
-
-	return 0;
-}
-static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend,
-		nec_8048_resume);
-#define NEC_8048_PM_OPS (&nec_8048_pm_ops)
-#else
-#define NEC_8048_PM_OPS NULL
-#endif
-
-static struct spi_driver nec_8048_driver = {
-	.driver = {
-		.name	= "panel-nec-nl8048hl11",
-		.owner	= THIS_MODULE,
-		.pm	= NEC_8048_PM_OPS,
-	},
-	.probe	= nec_8048_probe,
-	.remove	= nec_8048_remove,
-};
-
-module_spi_driver(nec_8048_driver);
-
-MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
-MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c
deleted file mode 100644
index b2f710be565d..000000000000
--- a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * LCD panel driver for Sharp LS037V7DW01
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	int data_lines;
-
-	struct omap_video_timings videomode;
-
-	int resb_gpio;
-	int ini_gpio;
-	int mo_gpio;
-	int lr_gpio;
-	int ud_gpio;
-};
-
-static const struct omap_video_timings sharp_ls_timings = {
-	.x_res = 480,
-	.y_res = 640,
-
-	.pixelclock	= 19200000,
-
-	.hsw		= 2,
-	.hfp		= 1,
-	.hbp		= 28,
-
-	.vsw		= 1,
-	.vfp		= 1,
-	.vbp		= 1,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int sharp_ls_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void sharp_ls_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dpi->disconnect(in, dssdev);
-}
-
-static int sharp_ls_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
-	in->ops.dpi->set_timings(in, &ddata->videomode);
-
-	r = in->ops.dpi->enable(in);
-	if (r)
-		return r;
-
-	/* wait couple of vsyncs until enabling the LCD */
-	msleep(50);
-
-	if (gpio_is_valid(ddata->resb_gpio))
-		gpio_set_value_cansleep(ddata->resb_gpio, 1);
-
-	if (gpio_is_valid(ddata->ini_gpio))
-		gpio_set_value_cansleep(ddata->ini_gpio, 1);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void sharp_ls_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	if (gpio_is_valid(ddata->ini_gpio))
-		gpio_set_value_cansleep(ddata->ini_gpio, 0);
-
-	if (gpio_is_valid(ddata->resb_gpio))
-		gpio_set_value_cansleep(ddata->resb_gpio, 0);
-
-	/* wait at least 5 vsyncs after disabling the LCD */
-
-	msleep(100);
-
-	in->ops.dpi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void sharp_ls_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dpi->set_timings(in, timings);
-}
-
-static void sharp_ls_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->videomode;
-}
-
-static int sharp_ls_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, timings);
-}
-
-static struct omap_dss_driver sharp_ls_ops = {
-	.connect	= sharp_ls_connect,
-	.disconnect	= sharp_ls_disconnect,
-
-	.enable		= sharp_ls_enable,
-	.disable	= sharp_ls_disable,
-
-	.set_timings	= sharp_ls_set_timings,
-	.get_timings	= sharp_ls_get_timings,
-	.check_timings	= sharp_ls_check_timings,
-
-	.get_resolution	= omapdss_default_get_resolution,
-};
-
-static int sharp_ls_probe_pdata(struct platform_device *pdev)
-{
-	const struct panel_sharp_ls037v7dw01_platform_data *pdata;
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&pdev->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	ddata->resb_gpio = pdata->resb_gpio;
-	ddata->ini_gpio = pdata->ini_gpio;
-	ddata->mo_gpio = pdata->mo_gpio;
-	ddata->lr_gpio = pdata->lr_gpio;
-	ddata->ud_gpio = pdata->ud_gpio;
-
-	return 0;
-}
-
-static int sharp_ls_probe(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ddata);
-
-	if (dev_get_platdata(&pdev->dev)) {
-		r = sharp_ls_probe_pdata(pdev);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->mo_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->mo_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd MO");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->lr_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->lr_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd LR");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->ud_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->ud_gpio,
-				GPIOF_OUT_INIT_HIGH, "lcd UD");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->resb_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->resb_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd RESB");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->ini_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->ini_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd INI");
-		if (r)
-			goto err_gpio;
-	}
-
-	ddata->videomode = sharp_ls_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &pdev->dev;
-	dssdev->driver = &sharp_ls_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
-	dssdev->phy.dpi.data_lines = ddata->data_lines;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&pdev->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int __exit sharp_ls_remove(struct platform_device *pdev)
-{
-	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	omapdss_unregister_display(dssdev);
-
-	sharp_ls_disable(dssdev);
-	sharp_ls_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static struct platform_driver sharp_ls_driver = {
-	.probe = sharp_ls_probe,
-	.remove = __exit_p(sharp_ls_remove),
-	.driver = {
-		.name = "panel-sharp-ls037v7dw01",
-		.owner = THIS_MODULE,
-	},
-};
-
-module_platform_driver(sharp_ls_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
deleted file mode 100644
index c7ba4d8b928a..000000000000
--- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
+++ /dev/null
@@ -1,911 +0,0 @@
-/*
- * Sony ACX565AKM LCD Panel driver
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Original Driver Author: Imre Deak <imre.deak@nokia.com>
- * Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@nokia.com>
- * Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/jiffies.h>
-#include <linux/sched.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#define MIPID_CMD_READ_DISP_ID		0x04
-#define MIPID_CMD_READ_RED		0x06
-#define MIPID_CMD_READ_GREEN		0x07
-#define MIPID_CMD_READ_BLUE		0x08
-#define MIPID_CMD_READ_DISP_STATUS	0x09
-#define MIPID_CMD_RDDSDR		0x0F
-#define MIPID_CMD_SLEEP_IN		0x10
-#define MIPID_CMD_SLEEP_OUT		0x11
-#define MIPID_CMD_DISP_OFF		0x28
-#define MIPID_CMD_DISP_ON		0x29
-#define MIPID_CMD_WRITE_DISP_BRIGHTNESS	0x51
-#define MIPID_CMD_READ_DISP_BRIGHTNESS	0x52
-#define MIPID_CMD_WRITE_CTRL_DISP	0x53
-
-#define CTRL_DISP_BRIGHTNESS_CTRL_ON	(1 << 5)
-#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON	(1 << 4)
-#define CTRL_DISP_BACKLIGHT_ON		(1 << 2)
-#define CTRL_DISP_AUTO_BRIGHTNESS_ON	(1 << 1)
-
-#define MIPID_CMD_READ_CTRL_DISP	0x54
-#define MIPID_CMD_WRITE_CABC		0x55
-#define MIPID_CMD_READ_CABC		0x56
-
-#define MIPID_VER_LPH8923		3
-#define MIPID_VER_LS041Y3		4
-#define MIPID_VER_L4F00311		8
-#define MIPID_VER_ACX565AKM		9
-
-struct panel_drv_data {
-	struct omap_dss_device	dssdev;
-	struct omap_dss_device *in;
-
-	int reset_gpio;
-	int datapairs;
-
-	struct omap_video_timings videomode;
-
-	char		*name;
-	int		enabled;
-	int		model;
-	int		revision;
-	u8		display_id[3];
-	unsigned	has_bc:1;
-	unsigned	has_cabc:1;
-	unsigned	cabc_mode;
-	unsigned long	hw_guard_end;		/* next value of jiffies
-						   when we can issue the
-						   next sleep in/out command */
-	unsigned long	hw_guard_wait;		/* max guard time in jiffies */
-
-	struct spi_device	*spi;
-	struct mutex		mutex;
-
-	struct backlight_device *bl_dev;
-};
-
-static const struct omap_video_timings acx565akm_panel_timings = {
-	.x_res		= 800,
-	.y_res		= 480,
-	.pixelclock	= 24000000,
-	.hfp		= 28,
-	.hsw		= 4,
-	.hbp		= 24,
-	.vfp		= 3,
-	.vsw		= 3,
-	.vbp		= 4,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static void acx565akm_transfer(struct panel_drv_data *ddata, int cmd,
-			      const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
-	struct spi_message	m;
-	struct spi_transfer	*x, xfer[5];
-	int			r;
-
-	BUG_ON(ddata->spi == NULL);
-
-	spi_message_init(&m);
-
-	memset(xfer, 0, sizeof(xfer));
-	x = &xfer[0];
-
-	cmd &=  0xff;
-	x->tx_buf = &cmd;
-	x->bits_per_word = 9;
-	x->len = 2;
-
-	if (rlen > 1 && wlen == 0) {
-		/*
-		 * Between the command and the response data there is a
-		 * dummy clock cycle. Add an extra bit after the command
-		 * word to account for this.
-		 */
-		x->bits_per_word = 10;
-		cmd <<= 1;
-	}
-	spi_message_add_tail(x, &m);
-
-	if (wlen) {
-		x++;
-		x->tx_buf = wbuf;
-		x->len = wlen;
-		x->bits_per_word = 9;
-		spi_message_add_tail(x, &m);
-	}
-
-	if (rlen) {
-		x++;
-		x->rx_buf	= rbuf;
-		x->len		= rlen;
-		spi_message_add_tail(x, &m);
-	}
-
-	r = spi_sync(ddata->spi, &m);
-	if (r < 0)
-		dev_dbg(&ddata->spi->dev, "spi_sync %d\n", r);
-}
-
-static inline void acx565akm_cmd(struct panel_drv_data *ddata, int cmd)
-{
-	acx565akm_transfer(ddata, cmd, NULL, 0, NULL, 0);
-}
-
-static inline void acx565akm_write(struct panel_drv_data *ddata,
-			       int reg, const u8 *buf, int len)
-{
-	acx565akm_transfer(ddata, reg, buf, len, NULL, 0);
-}
-
-static inline void acx565akm_read(struct panel_drv_data *ddata,
-			      int reg, u8 *buf, int len)
-{
-	acx565akm_transfer(ddata, reg, NULL, 0, buf, len);
-}
-
-static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
-{
-	ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
-	ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
-}
-
-static void hw_guard_wait(struct panel_drv_data *ddata)
-{
-	unsigned long wait = ddata->hw_guard_end - jiffies;
-
-	if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(wait);
-	}
-}
-
-static void set_sleep_mode(struct panel_drv_data *ddata, int on)
-{
-	int cmd;
-
-	if (on)
-		cmd = MIPID_CMD_SLEEP_IN;
-	else
-		cmd = MIPID_CMD_SLEEP_OUT;
-	/*
-	 * We have to keep 120msec between sleep in/out commands.
-	 * (8.2.15, 8.2.16).
-	 */
-	hw_guard_wait(ddata);
-	acx565akm_cmd(ddata, cmd);
-	hw_guard_start(ddata, 120);
-}
-
-static void set_display_state(struct panel_drv_data *ddata, int enabled)
-{
-	int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
-
-	acx565akm_cmd(ddata, cmd);
-}
-
-static int panel_enabled(struct panel_drv_data *ddata)
-{
-	u32 disp_status;
-	int enabled;
-
-	acx565akm_read(ddata, MIPID_CMD_READ_DISP_STATUS,
-			(u8 *)&disp_status, 4);
-	disp_status = __be32_to_cpu(disp_status);
-	enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
-	dev_dbg(&ddata->spi->dev,
-		"LCD panel %senabled by bootloader (status 0x%04x)\n",
-		enabled ? "" : "not ", disp_status);
-	return enabled;
-}
-
-static int panel_detect(struct panel_drv_data *ddata)
-{
-	acx565akm_read(ddata, MIPID_CMD_READ_DISP_ID, ddata->display_id, 3);
-	dev_dbg(&ddata->spi->dev, "MIPI display ID: %02x%02x%02x\n",
-		ddata->display_id[0],
-		ddata->display_id[1],
-		ddata->display_id[2]);
-
-	switch (ddata->display_id[0]) {
-	case 0x10:
-		ddata->model = MIPID_VER_ACX565AKM;
-		ddata->name = "acx565akm";
-		ddata->has_bc = 1;
-		ddata->has_cabc = 1;
-		break;
-	case 0x29:
-		ddata->model = MIPID_VER_L4F00311;
-		ddata->name = "l4f00311";
-		break;
-	case 0x45:
-		ddata->model = MIPID_VER_LPH8923;
-		ddata->name = "lph8923";
-		break;
-	case 0x83:
-		ddata->model = MIPID_VER_LS041Y3;
-		ddata->name = "ls041y3";
-		break;
-	default:
-		ddata->name = "unknown";
-		dev_err(&ddata->spi->dev, "invalid display ID\n");
-		return -ENODEV;
-	}
-
-	ddata->revision = ddata->display_id[1];
-
-	dev_info(&ddata->spi->dev, "omapfb: %s rev %02x LCD detected\n",
-			ddata->name, ddata->revision);
-
-	return 0;
-}
-
-/*----------------------Backlight Control-------------------------*/
-
-static void enable_backlight_ctrl(struct panel_drv_data *ddata, int enable)
-{
-	u16 ctrl;
-
-	acx565akm_read(ddata, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
-	if (enable) {
-		ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
-			CTRL_DISP_BACKLIGHT_ON;
-	} else {
-		ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
-			  CTRL_DISP_BACKLIGHT_ON);
-	}
-
-	ctrl |= 1 << 8;
-	acx565akm_write(ddata, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
-}
-
-static void set_cabc_mode(struct panel_drv_data *ddata, unsigned mode)
-{
-	u16 cabc_ctrl;
-
-	ddata->cabc_mode = mode;
-	if (!ddata->enabled)
-		return;
-	cabc_ctrl = 0;
-	acx565akm_read(ddata, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
-	cabc_ctrl &= ~3;
-	cabc_ctrl |= (1 << 8) | (mode & 3);
-	acx565akm_write(ddata, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
-}
-
-static unsigned get_cabc_mode(struct panel_drv_data *ddata)
-{
-	return ddata->cabc_mode;
-}
-
-static unsigned get_hw_cabc_mode(struct panel_drv_data *ddata)
-{
-	u8 cabc_ctrl;
-
-	acx565akm_read(ddata, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
-	return cabc_ctrl & 3;
-}
-
-static void acx565akm_set_brightness(struct panel_drv_data *ddata, int level)
-{
-	int bv;
-
-	bv = level | (1 << 8);
-	acx565akm_write(ddata, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
-
-	if (level)
-		enable_backlight_ctrl(ddata, 1);
-	else
-		enable_backlight_ctrl(ddata, 0);
-}
-
-static int acx565akm_get_actual_brightness(struct panel_drv_data *ddata)
-{
-	u8 bv;
-
-	acx565akm_read(ddata, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
-
-	return bv;
-}
-
-
-static int acx565akm_bl_update_status(struct backlight_device *dev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
-	int level;
-
-	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		level = dev->props.brightness;
-	else
-		level = 0;
-
-	if (ddata->has_bc)
-		acx565akm_set_brightness(ddata, level);
-	else
-		return -ENODEV;
-
-	return 0;
-}
-
-static int acx565akm_bl_get_intensity(struct backlight_device *dev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
-
-	dev_dbg(&dev->dev, "%s\n", __func__);
-
-	if (!ddata->has_bc)
-		return -ENODEV;
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK) {
-		if (ddata->has_bc)
-			return acx565akm_get_actual_brightness(ddata);
-		else
-			return dev->props.brightness;
-	}
-
-	return 0;
-}
-
-static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
-	int r;
-
-	mutex_lock(&ddata->mutex);
-	r = acx565akm_bl_update_status(dev);
-	mutex_unlock(&ddata->mutex);
-
-	return r;
-}
-
-static int acx565akm_bl_get_intensity_locked(struct backlight_device *dev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
-	int r;
-
-	mutex_lock(&ddata->mutex);
-	r = acx565akm_bl_get_intensity(dev);
-	mutex_unlock(&ddata->mutex);
-
-	return r;
-}
-
-static const struct backlight_ops acx565akm_bl_ops = {
-	.get_brightness = acx565akm_bl_get_intensity_locked,
-	.update_status  = acx565akm_bl_update_status_locked,
-};
-
-/*--------------------Auto Brightness control via Sysfs---------------------*/
-
-static const char * const cabc_modes[] = {
-	"off",		/* always used when CABC is not supported */
-	"ui",
-	"still-image",
-	"moving-image",
-};
-
-static ssize_t show_cabc_mode(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-	const char *mode_str;
-	int mode;
-	int len;
-
-	if (!ddata->has_cabc)
-		mode = 0;
-	else
-		mode = get_cabc_mode(ddata);
-	mode_str = "unknown";
-	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
-		mode_str = cabc_modes[mode];
-	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
-
-	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
-}
-
-static ssize_t store_cabc_mode(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
-		const char *mode_str = cabc_modes[i];
-		int cmp_len = strlen(mode_str);
-
-		if (count > 0 && buf[count - 1] == '\n')
-			count--;
-		if (count != cmp_len)
-			continue;
-
-		if (strncmp(buf, mode_str, cmp_len) == 0)
-			break;
-	}
-
-	if (i == ARRAY_SIZE(cabc_modes))
-		return -EINVAL;
-
-	if (!ddata->has_cabc && i != 0)
-		return -EINVAL;
-
-	mutex_lock(&ddata->mutex);
-	set_cabc_mode(ddata, i);
-	mutex_unlock(&ddata->mutex);
-
-	return count;
-}
-
-static ssize_t show_cabc_available_modes(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-	int len;
-	int i;
-
-	if (!ddata->has_cabc)
-		return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
-
-	for (i = 0, len = 0;
-	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
-		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
-			i ? " " : "", cabc_modes[i],
-			i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
-
-	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
-}
-
-static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
-		show_cabc_mode, store_cabc_mode);
-static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
-		show_cabc_available_modes, NULL);
-
-static struct attribute *bldev_attrs[] = {
-	&dev_attr_cabc_mode.attr,
-	&dev_attr_cabc_available_modes.attr,
-	NULL,
-};
-
-static struct attribute_group bldev_attr_group = {
-	.attrs = bldev_attrs,
-};
-
-static int acx565akm_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.sdi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void acx565akm_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.sdi->disconnect(in, dssdev);
-}
-
-static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
-	in->ops.sdi->set_timings(in, &ddata->videomode);
-
-	if (ddata->datapairs > 0)
-		in->ops.sdi->set_datapairs(in, ddata->datapairs);
-
-	r = in->ops.sdi->enable(in);
-	if (r) {
-		pr_err("%s sdi enable failed\n", __func__);
-		return r;
-	}
-
-	/*FIXME tweak me */
-	msleep(50);
-
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 1);
-
-	if (ddata->enabled) {
-		dev_dbg(&ddata->spi->dev, "panel already enabled\n");
-		return 0;
-	}
-
-	/*
-	 * We have to meet all the following delay requirements:
-	 * 1. tRW: reset pulse width 10usec (7.12.1)
-	 * 2. tRT: reset cancel time 5msec (7.12.1)
-	 * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
-	 *    case (7.6.2)
-	 * 4. 120msec before the sleep out command (7.12.1)
-	 */
-	msleep(120);
-
-	set_sleep_mode(ddata, 0);
-	ddata->enabled = 1;
-
-	/* 5msec between sleep out and the next command. (8.2.16) */
-	usleep_range(5000, 10000);
-	set_display_state(ddata, 1);
-	set_cabc_mode(ddata, ddata->cabc_mode);
-
-	return acx565akm_bl_update_status(ddata->bl_dev);
-}
-
-static void acx565akm_panel_power_off(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(dssdev->dev, "%s\n", __func__);
-
-	if (!ddata->enabled)
-		return;
-
-	set_display_state(ddata, 0);
-	set_sleep_mode(ddata, 1);
-	ddata->enabled = 0;
-	/*
-	 * We have to provide PCLK,HS,VS signals for 2 frames (worst case
-	 * ~50msec) after sending the sleep in command and asserting the
-	 * reset signal. We probably could assert the reset w/o the delay
-	 * but we still delay to avoid possible artifacts. (7.6.1)
-	 */
-	msleep(50);
-
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 0);
-
-	/* FIXME need to tweak this delay */
-	msleep(100);
-
-	in->ops.sdi->disable(in);
-}
-
-static int acx565akm_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	int r;
-
-	dev_dbg(dssdev->dev, "%s\n", __func__);
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	mutex_lock(&ddata->mutex);
-	r = acx565akm_panel_power_on(dssdev);
-	mutex_unlock(&ddata->mutex);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void acx565akm_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	dev_dbg(dssdev->dev, "%s\n", __func__);
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	mutex_lock(&ddata->mutex);
-	acx565akm_panel_power_off(dssdev);
-	mutex_unlock(&ddata->mutex);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void acx565akm_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.sdi->set_timings(in, timings);
-}
-
-static void acx565akm_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->videomode;
-}
-
-static int acx565akm_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.sdi->check_timings(in, timings);
-}
-
-static struct omap_dss_driver acx565akm_ops = {
-	.connect	= acx565akm_connect,
-	.disconnect	= acx565akm_disconnect,
-
-	.enable		= acx565akm_enable,
-	.disable	= acx565akm_disable,
-
-	.set_timings	= acx565akm_set_timings,
-	.get_timings	= acx565akm_get_timings,
-	.check_timings	= acx565akm_check_timings,
-
-	.get_resolution	= omapdss_default_get_resolution,
-};
-
-static int acx565akm_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_acx565akm_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	ddata->reset_gpio = pdata->reset_gpio;
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-	ddata->in = in;
-
-	ddata->datapairs = pdata->datapairs;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int acx565akm_probe_of(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct device_node *np = spi->dev.of_node;
-
-	ddata->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
-
-	ddata->in = omapdss_of_find_source_for_first_ep(np);
-	if (IS_ERR(ddata->in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(ddata->in);
-	}
-
-	return 0;
-}
-
-static int acx565akm_probe(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	struct backlight_device *bldev;
-	int max_brightness, brightness;
-	struct backlight_properties props;
-	int r;
-
-	dev_dbg(&spi->dev, "%s\n", __func__);
-
-	spi->mode = SPI_MODE_3;
-
-	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, ddata);
-
-	ddata->spi = spi;
-
-	mutex_init(&ddata->mutex);
-
-	if (dev_get_platdata(&spi->dev)) {
-		r = acx565akm_probe_pdata(spi);
-		if (r)
-			return r;
-	} else if (spi->dev.of_node) {
-		r = acx565akm_probe_of(spi);
-		if (r)
-			return r;
-	} else {
-		dev_err(&spi->dev, "platform data missing!\n");
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->reset_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->reset_gpio,
-				GPIOF_OUT_INIT_LOW, "lcd reset");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 1);
-
-	/*
-	 * After reset we have to wait 5 msec before the first
-	 * command can be sent.
-	 */
-	usleep_range(5000, 10000);
-
-	ddata->enabled = panel_enabled(ddata);
-
-	r = panel_detect(ddata);
-
-	if (!ddata->enabled && gpio_is_valid(ddata->reset_gpio))
-		gpio_set_value(ddata->reset_gpio, 0);
-
-	if (r) {
-		dev_err(&spi->dev, "%s panel detect error\n", __func__);
-		goto err_detect;
-	}
-
-	memset(&props, 0, sizeof(props));
-	props.fb_blank = FB_BLANK_UNBLANK;
-	props.power = FB_BLANK_UNBLANK;
-	props.type = BACKLIGHT_RAW;
-
-	bldev = backlight_device_register("acx565akm", &ddata->spi->dev,
-			ddata, &acx565akm_bl_ops, &props);
-	ddata->bl_dev = bldev;
-	if (ddata->has_cabc) {
-		r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
-		if (r) {
-			dev_err(&bldev->dev,
-				"%s failed to create sysfs files\n", __func__);
-			goto err_sysfs;
-		}
-		ddata->cabc_mode = get_hw_cabc_mode(ddata);
-	}
-
-	max_brightness = 255;
-
-	if (ddata->has_bc)
-		brightness = acx565akm_get_actual_brightness(ddata);
-	else
-		brightness = 0;
-
-	bldev->props.max_brightness = max_brightness;
-	bldev->props.brightness = brightness;
-
-	acx565akm_bl_update_status(bldev);
-
-
-	ddata->videomode = acx565akm_panel_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &spi->dev;
-	dssdev->driver = &acx565akm_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_SDI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&spi->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-	sysfs_remove_group(&bldev->dev.kobj, &bldev_attr_group);
-err_sysfs:
-	backlight_device_unregister(bldev);
-err_detect:
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int acx565akm_remove(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
-	sysfs_remove_group(&ddata->bl_dev->dev.kobj, &bldev_attr_group);
-	backlight_device_unregister(ddata->bl_dev);
-
-	omapdss_unregister_display(dssdev);
-
-	acx565akm_disable(dssdev);
-	acx565akm_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static const struct of_device_id acx565akm_of_match[] = {
-	{ .compatible = "omapdss,sony,acx565akm", },
-	{},
-};
-
-static struct spi_driver acx565akm_driver = {
-	.driver = {
-		.name	= "acx565akm",
-		.owner	= THIS_MODULE,
-		.of_match_table = acx565akm_of_match,
-	},
-	.probe	= acx565akm_probe,
-	.remove	= acx565akm_remove,
-};
-
-module_spi_driver(acx565akm_driver);
-
-MODULE_AUTHOR("Nokia Corporation");
-MODULE_DESCRIPTION("acx565akm LCD Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c
deleted file mode 100644
index fae6adc005a7..000000000000
--- a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
- * Toppoly TD028TTEC1 panel support
- *
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * Neo 1973 code (jbt6k74.c):
- * Copyright (C) 2006-2007 by OpenMoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- *
- * Ported and adapted from Neo 1973 U-Boot by:
- * H. Nikolaus Schaller <hns@goldelico.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	int data_lines;
-
-	struct omap_video_timings videomode;
-
-	struct spi_device *spi_dev;
-};
-
-static struct omap_video_timings td028ttec1_panel_timings = {
-	.x_res		= 480,
-	.y_res		= 640,
-	.pixelclock	= 22153000,
-	.hfp		= 24,
-	.hsw		= 8,
-	.hbp		= 8,
-	.vfp		= 4,
-	.vsw		= 2,
-	.vbp		= 2,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-#define JBT_COMMAND	0x000
-#define JBT_DATA	0x100
-
-static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
-{
-	int rc;
-	u16 tx_buf = JBT_COMMAND | reg;
-
-	rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
-			1*sizeof(u16));
-	if (rc != 0)
-		dev_err(&ddata->spi_dev->dev,
-			"jbt_ret_write_0 spi_write ret %d\n", rc);
-
-	return rc;
-}
-
-static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
-{
-	int rc;
-	u16 tx_buf[2];
-
-	tx_buf[0] = JBT_COMMAND | reg;
-	tx_buf[1] = JBT_DATA | data;
-	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
-			2*sizeof(u16));
-	if (rc != 0)
-		dev_err(&ddata->spi_dev->dev,
-			"jbt_reg_write_1 spi_write ret %d\n", rc);
-
-	return rc;
-}
-
-static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
-{
-	int rc;
-	u16 tx_buf[3];
-
-	tx_buf[0] = JBT_COMMAND | reg;
-	tx_buf[1] = JBT_DATA | (data >> 8);
-	tx_buf[2] = JBT_DATA | (data & 0xff);
-
-	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
-			3*sizeof(u16));
-
-	if (rc != 0)
-		dev_err(&ddata->spi_dev->dev,
-			"jbt_reg_write_2 spi_write ret %d\n", rc);
-
-	return rc;
-}
-
-enum jbt_register {
-	JBT_REG_SLEEP_IN		= 0x10,
-	JBT_REG_SLEEP_OUT		= 0x11,
-
-	JBT_REG_DISPLAY_OFF		= 0x28,
-	JBT_REG_DISPLAY_ON		= 0x29,
-
-	JBT_REG_RGB_FORMAT		= 0x3a,
-	JBT_REG_QUAD_RATE		= 0x3b,
-
-	JBT_REG_POWER_ON_OFF		= 0xb0,
-	JBT_REG_BOOSTER_OP		= 0xb1,
-	JBT_REG_BOOSTER_MODE		= 0xb2,
-	JBT_REG_BOOSTER_FREQ		= 0xb3,
-	JBT_REG_OPAMP_SYSCLK		= 0xb4,
-	JBT_REG_VSC_VOLTAGE		= 0xb5,
-	JBT_REG_VCOM_VOLTAGE		= 0xb6,
-	JBT_REG_EXT_DISPL		= 0xb7,
-	JBT_REG_OUTPUT_CONTROL		= 0xb8,
-	JBT_REG_DCCLK_DCEV		= 0xb9,
-	JBT_REG_DISPLAY_MODE1		= 0xba,
-	JBT_REG_DISPLAY_MODE2		= 0xbb,
-	JBT_REG_DISPLAY_MODE		= 0xbc,
-	JBT_REG_ASW_SLEW		= 0xbd,
-	JBT_REG_DUMMY_DISPLAY		= 0xbe,
-	JBT_REG_DRIVE_SYSTEM		= 0xbf,
-
-	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
-	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
-	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
-	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
-	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
-	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
-	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
-
-	JBT_REG_GAMMA1_FINE_1		= 0xc7,
-	JBT_REG_GAMMA1_FINE_2		= 0xc8,
-	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
-	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
-
-	JBT_REG_BLANK_CONTROL		= 0xcf,
-	JBT_REG_BLANK_TH_TV		= 0xd0,
-	JBT_REG_CKV_ON_OFF		= 0xd1,
-	JBT_REG_CKV_1_2			= 0xd2,
-	JBT_REG_OEV_TIMING		= 0xd3,
-	JBT_REG_ASW_TIMING_1		= 0xd4,
-	JBT_REG_ASW_TIMING_2		= 0xd5,
-
-	JBT_REG_HCLOCK_VGA		= 0xec,
-	JBT_REG_HCLOCK_QVGA		= 0xed,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int td028ttec1_panel_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void td028ttec1_panel_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dpi->disconnect(in, dssdev);
-}
-
-static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
-	in->ops.dpi->set_timings(in, &ddata->videomode);
-
-	r = in->ops.dpi->enable(in);
-	if (r)
-		return r;
-
-	dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n",
-		dssdev->state);
-
-	/* three times command zero */
-	r |= jbt_ret_write_0(ddata, 0x00);
-	usleep_range(1000, 2000);
-	r |= jbt_ret_write_0(ddata, 0x00);
-	usleep_range(1000, 2000);
-	r |= jbt_ret_write_0(ddata, 0x00);
-	usleep_range(1000, 2000);
-
-	if (r) {
-		dev_warn(dssdev->dev, "transfer error\n");
-		goto transfer_err;
-	}
-
-	/* deep standby out */
-	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
-
-	/* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
-	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
-
-	/* Quad mode off */
-	r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
-
-	/* AVDD on, XVDD on */
-	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
-
-	/* Output control */
-	r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
-
-	/* Sleep mode off */
-	r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
-
-	/* at this point we have like 50% grey */
-
-	/* initialize register set */
-	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
-	r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
-	r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
-	r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
-	r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
-	/*
-	 * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
-	 * to avoid red / blue flicker
-	 */
-	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
-
-	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
-
-	r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
-	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
-	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
-	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
-
-	r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
-	r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
-
-	r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
-	r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
-
-	r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
-	r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
-	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
-
-	r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-transfer_err:
-
-	return r ? -EIO : 0;
-}
-
-static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
-
-	jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
-	jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
-	jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
-	jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
-
-	in->ops.dpi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dpi->set_timings(in, timings);
-}
-
-static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->videomode;
-}
-
-static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, timings);
-}
-
-static struct omap_dss_driver td028ttec1_ops = {
-	.connect	= td028ttec1_panel_connect,
-	.disconnect	= td028ttec1_panel_disconnect,
-
-	.enable		= td028ttec1_panel_enable,
-	.disable	= td028ttec1_panel_disable,
-
-	.set_timings	= td028ttec1_panel_set_timings,
-	.get_timings	= td028ttec1_panel_get_timings,
-	.check_timings	= td028ttec1_panel_check_timings,
-};
-
-static int td028ttec1_panel_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_tpo_td028ttec1_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int td028ttec1_panel_probe(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	dev_dbg(&spi->dev, "%s\n", __func__);
-
-	spi->bits_per_word = 9;
-	spi->mode = SPI_MODE_3;
-
-	r = spi_setup(spi);
-	if (r < 0) {
-		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
-		return r;
-	}
-
-	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, ddata);
-
-	ddata->spi_dev = spi;
-
-	if (dev_get_platdata(&spi->dev)) {
-		r = td028ttec1_panel_probe_pdata(spi);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	ddata->videomode = td028ttec1_panel_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &spi->dev;
-	dssdev->driver = &td028ttec1_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
-	dssdev->phy.dpi.data_lines = ddata->data_lines;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&spi->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int td028ttec1_panel_remove(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
-
-	omapdss_unregister_display(dssdev);
-
-	td028ttec1_panel_disable(dssdev);
-	td028ttec1_panel_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static struct spi_driver td028ttec1_spi_driver = {
-	.probe		= td028ttec1_panel_probe,
-	.remove		= td028ttec1_panel_remove,
-
-	.driver         = {
-		.name   = "panel-tpo-td028ttec1",
-		.owner  = THIS_MODULE,
-	},
-};
-
-module_spi_driver(td028ttec1_spi_driver);
-
-MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
-MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c
deleted file mode 100644
index 875b40263b33..000000000000
--- a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * TPO TD043MTEA1 Panel driver
- *
- * Author: Gražvydas Ignotas <notasas@gmail.com>
- * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/consumer.h>
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#define TPO_R02_MODE(x)		((x) & 7)
-#define TPO_R02_MODE_800x480	7
-#define TPO_R02_NCLK_RISING	BIT(3)
-#define TPO_R02_HSYNC_HIGH	BIT(4)
-#define TPO_R02_VSYNC_HIGH	BIT(5)
-
-#define TPO_R03_NSTANDBY	BIT(0)
-#define TPO_R03_EN_CP_CLK	BIT(1)
-#define TPO_R03_EN_VGL_PUMP	BIT(2)
-#define TPO_R03_EN_PWM		BIT(3)
-#define TPO_R03_DRIVING_CAP_100	BIT(4)
-#define TPO_R03_EN_PRE_CHARGE	BIT(6)
-#define TPO_R03_SOFTWARE_CTL	BIT(7)
-
-#define TPO_R04_NFLIP_H		BIT(0)
-#define TPO_R04_NFLIP_V		BIT(1)
-#define TPO_R04_CP_CLK_FREQ_1H	BIT(2)
-#define TPO_R04_VGL_FREQ_1H	BIT(4)
-
-#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
-			TPO_R03_EN_VGL_PUMP |  TPO_R03_EN_PWM | \
-			TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
-			TPO_R03_SOFTWARE_CTL)
-
-#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
-			TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
-
-static const u16 tpo_td043_def_gamma[12] = {
-	105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
-};
-
-struct panel_drv_data {
-	struct omap_dss_device	dssdev;
-	struct omap_dss_device *in;
-
-	struct omap_video_timings videomode;
-
-	int data_lines;
-
-	struct spi_device *spi;
-	struct regulator *vcc_reg;
-	int nreset_gpio;
-	u16 gamma[12];
-	u32 mode;
-	u32 hmirror:1;
-	u32 vmirror:1;
-	u32 powered_on:1;
-	u32 spi_suspended:1;
-	u32 power_on_resume:1;
-};
-
-static const struct omap_video_timings tpo_td043_timings = {
-	.x_res		= 800,
-	.y_res		= 480,
-
-	.pixelclock	= 36000000,
-
-	.hsw		= 1,
-	.hfp		= 68,
-	.hbp		= 214,
-
-	.vsw		= 1,
-	.vfp		= 39,
-	.vbp		= 34,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
-{
-	struct spi_message	m;
-	struct spi_transfer	xfer;
-	u16			w;
-	int			r;
-
-	spi_message_init(&m);
-
-	memset(&xfer, 0, sizeof(xfer));
-
-	w = ((u16)addr << 10) | (1 << 8) | data;
-	xfer.tx_buf = &w;
-	xfer.bits_per_word = 16;
-	xfer.len = 2;
-	spi_message_add_tail(&xfer, &m);
-
-	r = spi_sync(spi, &m);
-	if (r < 0)
-		dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
-	return r;
-}
-
-static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
-{
-	u8 i, val;
-
-	/* gamma bits [9:8] */
-	for (val = i = 0; i < 4; i++)
-		val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
-	tpo_td043_write(spi, 0x11, val);
-
-	for (val = i = 0; i < 4; i++)
-		val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
-	tpo_td043_write(spi, 0x12, val);
-
-	for (val = i = 0; i < 4; i++)
-		val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
-	tpo_td043_write(spi, 0x13, val);
-
-	/* gamma bits [7:0] */
-	for (val = i = 0; i < 12; i++)
-		tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
-}
-
-static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
-{
-	u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
-		TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
-	if (h)
-		reg4 &= ~TPO_R04_NFLIP_H;
-	if (v)
-		reg4 &= ~TPO_R04_NFLIP_V;
-
-	return tpo_td043_write(spi, 4, reg4);
-}
-
-static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-
-	ddata->hmirror = enable;
-	return tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
-			ddata->vmirror);
-}
-
-static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
-
-	return ddata->hmirror;
-}
-
-static ssize_t tpo_td043_vmirror_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
-}
-
-static ssize_t tpo_td043_vmirror_store(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-	int val;
-	int ret;
-
-	ret = kstrtoint(buf, 0, &val);
-	if (ret < 0)
-		return ret;
-
-	val = !!val;
-
-	ret = tpo_td043_write_mirror(ddata->spi, ddata->hmirror, val);
-	if (ret < 0)
-		return ret;
-
-	ddata->vmirror = val;
-
-	return count;
-}
-
-static ssize_t tpo_td043_mode_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
-}
-
-static ssize_t tpo_td043_mode_store(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-	long val;
-	int ret;
-
-	ret = kstrtol(buf, 0, &val);
-	if (ret != 0 || val & ~7)
-		return -EINVAL;
-
-	ddata->mode = val;
-
-	val |= TPO_R02_NCLK_RISING;
-	tpo_td043_write(ddata->spi, 2, val);
-
-	return count;
-}
-
-static ssize_t tpo_td043_gamma_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-	ssize_t len = 0;
-	int ret;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
-		ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
-				ddata->gamma[i]);
-		if (ret < 0)
-			return ret;
-		len += ret;
-	}
-	buf[len - 1] = '\n';
-
-	return len;
-}
-
-static ssize_t tpo_td043_gamma_store(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-	unsigned int g[12];
-	int ret;
-	int i;
-
-	ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
-			&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
-			&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
-
-	if (ret != 12)
-		return -EINVAL;
-
-	for (i = 0; i < 12; i++)
-		ddata->gamma[i] = g[i];
-
-	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
-
-	return count;
-}
-
-static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
-		tpo_td043_vmirror_show, tpo_td043_vmirror_store);
-static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
-		tpo_td043_mode_show, tpo_td043_mode_store);
-static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
-		tpo_td043_gamma_show, tpo_td043_gamma_store);
-
-static struct attribute *tpo_td043_attrs[] = {
-	&dev_attr_vmirror.attr,
-	&dev_attr_mode.attr,
-	&dev_attr_gamma.attr,
-	NULL,
-};
-
-static struct attribute_group tpo_td043_attr_group = {
-	.attrs = tpo_td043_attrs,
-};
-
-static int tpo_td043_power_on(struct panel_drv_data *ddata)
-{
-	int r;
-
-	if (ddata->powered_on)
-		return 0;
-
-	r = regulator_enable(ddata->vcc_reg);
-	if (r != 0)
-		return r;
-
-	/* wait for panel to stabilize */
-	msleep(160);
-
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 1);
-
-	tpo_td043_write(ddata->spi, 2,
-			TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
-	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
-	tpo_td043_write(ddata->spi, 0x20, 0xf0);
-	tpo_td043_write(ddata->spi, 0x21, 0xf0);
-	tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
-			ddata->vmirror);
-	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
-
-	ddata->powered_on = 1;
-	return 0;
-}
-
-static void tpo_td043_power_off(struct panel_drv_data *ddata)
-{
-	if (!ddata->powered_on)
-		return;
-
-	tpo_td043_write(ddata->spi, 3,
-			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
-
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 0);
-
-	/* wait for at least 2 vsyncs before cutting off power */
-	msleep(50);
-
-	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
-
-	regulator_disable(ddata->vcc_reg);
-
-	ddata->powered_on = 0;
-}
-
-static int tpo_td043_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void tpo_td043_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dpi->disconnect(in, dssdev);
-}
-
-static int tpo_td043_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
-	in->ops.dpi->set_timings(in, &ddata->videomode);
-
-	r = in->ops.dpi->enable(in);
-	if (r)
-		return r;
-
-	/*
-	 * If we are resuming from system suspend, SPI clocks might not be
-	 * enabled yet, so we'll program the LCD from SPI PM resume callback.
-	 */
-	if (!ddata->spi_suspended) {
-		r = tpo_td043_power_on(ddata);
-		if (r) {
-			in->ops.dpi->disable(in);
-			return r;
-		}
-	}
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void tpo_td043_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	in->ops.dpi->disable(in);
-
-	if (!ddata->spi_suspended)
-		tpo_td043_power_off(ddata);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dpi->set_timings(in, timings);
-}
-
-static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->videomode;
-}
-
-static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, timings);
-}
-
-static struct omap_dss_driver tpo_td043_ops = {
-	.connect	= tpo_td043_connect,
-	.disconnect	= tpo_td043_disconnect,
-
-	.enable		= tpo_td043_enable,
-	.disable	= tpo_td043_disable,
-
-	.set_timings	= tpo_td043_set_timings,
-	.get_timings	= tpo_td043_get_timings,
-	.check_timings	= tpo_td043_check_timings,
-
-	.set_mirror	= tpo_td043_set_hmirror,
-	.get_mirror	= tpo_td043_get_hmirror,
-
-	.get_resolution	= omapdss_default_get_resolution,
-};
-
-
-static int tpo_td043_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_tpo_td043mtea1_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	ddata->nreset_gpio = pdata->nreset_gpio;
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int tpo_td043_probe(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	dev_dbg(&spi->dev, "%s\n", __func__);
-
-	spi->bits_per_word = 16;
-	spi->mode = SPI_MODE_0;
-
-	r = spi_setup(spi);
-	if (r < 0) {
-		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
-		return r;
-	}
-
-	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, ddata);
-
-	ddata->spi = spi;
-
-	if (dev_get_platdata(&spi->dev)) {
-		r = tpo_td043_probe_pdata(spi);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	ddata->mode = TPO_R02_MODE_800x480;
-	memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
-
-	ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
-	if (IS_ERR(ddata->vcc_reg)) {
-		dev_err(&spi->dev, "failed to get LCD VCC regulator\n");
-		r = PTR_ERR(ddata->vcc_reg);
-		goto err_regulator;
-	}
-
-	if (gpio_is_valid(ddata->nreset_gpio)) {
-		r = devm_gpio_request_one(&spi->dev,
-				ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
-				"lcd reset");
-		if (r < 0) {
-			dev_err(&spi->dev, "couldn't request reset GPIO\n");
-			goto err_gpio_req;
-		}
-	}
-
-	r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
-	if (r) {
-		dev_err(&spi->dev, "failed to create sysfs files\n");
-		goto err_sysfs;
-	}
-
-	ddata->videomode = tpo_td043_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &spi->dev;
-	dssdev->driver = &tpo_td043_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&spi->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
-err_sysfs:
-err_gpio_req:
-err_regulator:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int tpo_td043_remove(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
-	omapdss_unregister_display(dssdev);
-
-	tpo_td043_disable(dssdev);
-	tpo_td043_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int tpo_td043_spi_suspend(struct device *dev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
-
-	ddata->power_on_resume = ddata->powered_on;
-	tpo_td043_power_off(ddata);
-	ddata->spi_suspended = 1;
-
-	return 0;
-}
-
-static int tpo_td043_spi_resume(struct device *dev)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(dev);
-	int ret;
-
-	dev_dbg(dev, "tpo_td043_spi_resume\n");
-
-	if (ddata->power_on_resume) {
-		ret = tpo_td043_power_on(ddata);
-		if (ret)
-			return ret;
-	}
-	ddata->spi_suspended = 0;
-
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
-	tpo_td043_spi_suspend, tpo_td043_spi_resume);
-
-static struct spi_driver tpo_td043_spi_driver = {
-	.driver = {
-		.name	= "panel-tpo-td043mtea1",
-		.owner	= THIS_MODULE,
-		.pm	= &tpo_td043_spi_pm,
-	},
-	.probe	= tpo_td043_probe,
-	.remove	= tpo_td043_remove,
-};
-
-module_spi_driver(tpo_td043_spi_driver);
-
-MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
-MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
-MODULE_LICENSE("GPL");