summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2005-09-23 16:44:01 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2005-09-23 16:44:01 -0700
commit2ead1aa6f14ed542af0c9e2302a51ea02128f587 (patch)
treedfaf465122239a8bb450913b2e95f4647d24892f /drivers
parent7f28f394bd68e58bf3938c67bbeca7825b4687b8 (diff)
parentc8868611389aa28e0e5e0d63f468727781eac68c (diff)
downloadlinux-next-2ead1aa6f14ed542af0c9e2302a51ea02128f587.tar.gz
Merge branch 'upstream-fixes' from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/8390.c2
-rw-r--r--drivers/net/skge.c22
2 files changed, 21 insertions, 3 deletions
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index 6d76f3a99b17..f87027420081 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -1094,7 +1094,7 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD);
- if (inb_p(e8390_base) & E8390_TRANS)
+ if (inb_p(e8390_base + E8390_CMD) & E8390_TRANS)
{
printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n",
dev->name);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index ae1996a3bc5c..fd398da4993b 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -1643,6 +1643,22 @@ static void yukon_reset(struct skge_hw *hw, int port)
| GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
}
+/* Apparently, early versions of Yukon-Lite had wrong chip_id? */
+static int is_yukon_lite_a0(struct skge_hw *hw)
+{
+ u32 reg;
+ int ret;
+
+ if (hw->chip_id != CHIP_ID_YUKON)
+ return 0;
+
+ reg = skge_read32(hw, B2_FAR);
+ skge_write8(hw, B2_FAR + 3, 0xff);
+ ret = (skge_read8(hw, B2_FAR + 3) != 0);
+ skge_write32(hw, B2_FAR, reg);
+ return ret;
+}
+
static void yukon_mac_init(struct skge_hw *hw, int port)
{
struct skge_port *skge = netdev_priv(hw->dev[port]);
@@ -1758,9 +1774,11 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
/* Configure Rx MAC FIFO */
skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
- if (hw->chip_id == CHIP_ID_YUKON_LITE &&
- hw->chip_rev >= CHIP_REV_YU_LITE_A3)
+
+ /* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */
+ if (is_yukon_lite_a0(hw))
reg &= ~GMF_RX_F_FL_ON;
+
skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
/*