Merge tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This became wide and scattered updates all over the sound tree as
  diffstat shows: lots of (still ongoing) refactoring works in ASoC,
  fixes and cleanups caught by static analysis, inclusive term
  conversions as well as lots of new drivers. Below are highlights:

  ASoC core:
   - API cleanups and conversions to the unified mute_stream() call
   - Simplify I/O helper functions
   - Use helper macros to retrieve RTD from substreams

  ASoC drivers:
   - Lots of fixes and cleanups in Intel ASoC drivers
   - Lots of new stuff: Freescale MQS and i.MX6sx, Intel KeemBay I2S,
     Maxim MAX98360A and MAX98373 SoundWire, various Mediatek boards,
     nVidia Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries
     boards, TI J721e EVM

  ALSA core:
   - Minor code refacotring for SG-buffer handling

  HD-audio:
   - Generalization of mute-LED handling with LED classdev
   - Intel silent stream support for HDMI
   - Device-specific fixes: CA0132, Loongson-3

  Others:
   - Usual USB- and HD-audio quirks for various devices
   - Fixes for echoaudio DMA position handling
   - Various documents and trivial fixes for sparse warnings
   - Conversion to adopt inclusive terms"

* tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (479 commits)
  ALSA: pci: delete repeated words in comments
  ALSA: isa: delete repeated words in comments
  ALSA: hda/tegra: Add 100us dma stop delay
  ALSA: hda: Add dma stop delay variable
  ASoC: hda/tegra: Set buffer alignment to 128 bytes
  ALSA: seq: oss: Serialize ioctls
  ALSA: hda/hdmi: Add quirk to force connectivity
  ALSA: usb-audio: add startech usb audio dock name
  ALSA: usb-audio: Add support for Lenovo ThinkStation P620
  Revert "ALSA: hda: call runtime_allow() for all hda controllers"
  ALSA: hda/ca0132 - Fix AE-5 microphone selection commands.
  ALSA: hda/ca0132 - Add new quirk ID for Recon3D.
  ALSA: hda/ca0132 - Fix ZxR Headphone gain control get value.
  ALSA: hda/realtek: Add alc269/alc662 pin-tables for Loongson-3 laptops
  ALSA: docs: fix typo
  ALSA: doc: use correct config variable name
  ASoC: core: Two step component registration
  ASoC: core: Simplify snd_soc_component_initialize declaration
  ASoC: core: Relocate and expose snd_soc_component_initialize
  ASoC: sh: Replace 'select' DMADEVICES 'with depends on'
  ...

1 files changed, 11 insertions, 10 deletions

diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index d087f3b20b1d..467802875c13 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -82,7 +82,7 @@ static int aic32x4_get_mfp1_gpio(struct snd_kcontrol *kcontrol,
 	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
 	u8 val;
 
-	val = snd_soc_component_read32(component, AIC32X4_DINCTL);
+	val = snd_soc_component_read(component, AIC32X4_DINCTL);
 
 	ucontrol->value.integer.value[0] = (val & 0x01);
 
@@ -96,7 +96,7 @@ static int aic32x4_set_mfp2_gpio(struct snd_kcontrol *kcontrol,
 	u8 val;
 	u8 gpio_check;
 
-	val = snd_soc_component_read32(component, AIC32X4_DOUTCTL);
+	val = snd_soc_component_read(component, AIC32X4_DOUTCTL);
 	gpio_check = (val & AIC32X4_MFP_GPIO_ENABLED);
 	if (gpio_check != AIC32X4_MFP_GPIO_ENABLED) {
 		printk(KERN_ERR "%s: MFP2 is not configure as a GPIO output\n",
@@ -123,7 +123,7 @@ static int aic32x4_get_mfp3_gpio(struct snd_kcontrol *kcontrol,
 	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
 	u8 val;
 
-	val = snd_soc_component_read32(component, AIC32X4_SCLKCTL);
+	val = snd_soc_component_read(component, AIC32X4_SCLKCTL);
 
 	ucontrol->value.integer.value[0] = (val & 0x01);
 
@@ -137,7 +137,7 @@ static int aic32x4_set_mfp4_gpio(struct snd_kcontrol *kcontrol,
 	u8 val;
 	u8 gpio_check;
 
-	val = snd_soc_component_read32(component, AIC32X4_MISOCTL);
+	val = snd_soc_component_read(component, AIC32X4_MISOCTL);
 	gpio_check = (val & AIC32X4_MFP_GPIO_ENABLED);
 	if (gpio_check != AIC32X4_MFP_GPIO_ENABLED) {
 		printk(KERN_ERR "%s: MFP4 is not configure as a GPIO output\n",
@@ -164,7 +164,7 @@ static int aic32x4_get_mfp5_gpio(struct snd_kcontrol *kcontrol,
 	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
 	u8 val;
 
-	val = snd_soc_component_read32(component, AIC32X4_GPIOCTL);
+	val = snd_soc_component_read(component, AIC32X4_GPIOCTL);
 	ucontrol->value.integer.value[0] = ((val & 0x2) >> 1);
 
 	return 0;
@@ -177,7 +177,7 @@ static int aic32x4_set_mfp5_gpio(struct snd_kcontrol *kcontrol,
 	u8 val;
 	u8 gpio_check;
 
-	val = snd_soc_component_read32(component, AIC32X4_GPIOCTL);
+	val = snd_soc_component_read(component, AIC32X4_GPIOCTL);
 	gpio_check = (val & AIC32X4_MFP5_GPIO_OUTPUT);
 	if (gpio_check != AIC32X4_MFP5_GPIO_OUTPUT) {
 		printk(KERN_ERR "%s: MFP5 is not configure as a GPIO output\n",
@@ -812,7 +812,7 @@ static int aic32x4_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int aic32x4_mute(struct snd_soc_dai *dai, int mute)
+static int aic32x4_mute(struct snd_soc_dai *dai, int mute, int direction)
 {
 	struct snd_soc_component *component = dai->component;
 
@@ -866,9 +866,10 @@ static int aic32x4_set_bias_level(struct snd_soc_component *component,
 
 static const struct snd_soc_dai_ops aic32x4_ops = {
 	.hw_params = aic32x4_hw_params,
-	.digital_mute = aic32x4_mute,
+	.mute_stream = aic32x4_mute,
 	.set_fmt = aic32x4_set_dai_fmt,
 	.set_sysclk = aic32x4_set_dai_sysclk,
+	.no_capture_mute = 1,
 };
 
 static struct snd_soc_dai_driver aic32x4_dai = {
@@ -978,7 +979,7 @@ static int aic32x4_component_probe(struct snd_soc_component *component)
 			AIC32X4_LDOCTLEN : 0;
 	snd_soc_component_write(component, AIC32X4_LDOCTL, tmp_reg);
 
-	tmp_reg = snd_soc_component_read32(component, AIC32X4_CMMODE);
+	tmp_reg = snd_soc_component_read(component, AIC32X4_CMMODE);
 	if (aic32x4->power_cfg & AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36)
 		tmp_reg |= AIC32X4_LDOIN_18_36;
 	if (aic32x4->power_cfg & AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED)
@@ -1004,7 +1005,7 @@ static int aic32x4_component_probe(struct snd_soc_component *component)
 	 * and down for the first capture to work properly. It seems related to
 	 * a HW BUG or some kind of behavior not documented in the datasheet.
 	 */
-	tmp_reg = snd_soc_component_read32(component, AIC32X4_ADCSETUP);
+	tmp_reg = snd_soc_component_read(component, AIC32X4_ADCSETUP);
 	snd_soc_component_write(component, AIC32X4_ADCSETUP, tmp_reg |
 				AIC32X4_LADC_EN | AIC32X4_RADC_EN);
 	snd_soc_component_write(component, AIC32X4_ADCSETUP, tmp_reg);