summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt49
-rw-r--r--Documentation/devicetree/bindings/connector/usb-connector.txt75
-rw-r--r--drivers/extcon/extcon.c44
-rw-r--r--drivers/gpu/drm/bridge/sil-sii8620.c97
-rw-r--r--include/linux/extcon.h6
5 files changed, 258 insertions, 13 deletions
diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
new file mode 100644
index 000000000000..22256e295a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
@@ -0,0 +1,49 @@
+Samsung micro-USB 11-pin connector
+==================================
+
+Samsung micro-USB 11-pin connector is an extension of micro-USB connector.
+It is present in multiple Samsung mobile devices.
+It has additional pins to route MHL traffic simultanously with USB.
+
+The bindings are superset of usb-connector bindings for micro-USB connector[1].
+
+Required properties:
+- compatible: must be: "samsung,usb-connector-11pin", "usb-b-connector",
+- type: must be "micro".
+
+Required nodes:
+- any data bus to the connector should be modeled using the OF graph bindings
+ specified in bindings/graph.txt, unless the bus is between parent node and
+ the connector. Since single connector can have multpile data buses every bus
+ has assigned OF graph port number as follows:
+ 0: High Speed (HS),
+ 3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB.
+
+[1]: bindings/connector/usb-connector.txt
+
+Example
+-------
+
+Micro-USB connector with HS lines routed via controller (MUIC) and MHL lines
+connected to HDMI-MHL bridge (sii8620):
+
+muic-max77843@66 {
+ ...
+ usb_con: connector {
+ compatible = "samsung,usb-connector-11pin", "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@3 {
+ reg = <3>;
+ usb_con_mhl: endpoint {
+ remote-endpoint = <&sii8620_mhl>;
+ };
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
new file mode 100644
index 000000000000..e1463f14af38
--- /dev/null
+++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
@@ -0,0 +1,75 @@
+USB Connector
+=============
+
+USB connector node represents physical USB connector. It should be
+a child of USB interface controller.
+
+Required properties:
+- compatible: describes type of the connector, must be one of:
+ "usb-a-connector",
+ "usb-b-connector",
+ "usb-c-connector".
+
+Optional properties:
+- label: symbolic name for the connector,
+- type: size of the connector, should be specified in case of USB-A, USB-B
+ non-fullsize connectors: "mini", "micro".
+
+Required nodes:
+- any data bus to the connector should be modeled using the OF graph bindings
+ specified in bindings/graph.txt, unless the bus is between parent node and
+ the connector. Since single connector can have multpile data buses every bus
+ has assigned OF graph port number as follows:
+ 0: High Speed (HS), present in all connectors,
+ 1: Super Speed (SS), present in SS capable connectors,
+ 2: Sideband use (SBU), present in USB-C.
+
+Examples
+--------
+
+1. Micro-USB connector with HS lines routed via controller (MUIC):
+
+muic-max77843@66 {
+ ...
+ usb_con: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
+};
+
+2. USB-C connector attached to CC controller (s2mm005), HS lines routed
+to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
+DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
+
+ccic: s2mm005@33 {
+ ...
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_con_hs: endpoint {
+ remote-endpoint = <&max77865_usbc_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&usbdrd_phy_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usb_con_sbu: endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
+ };
+ };
+};
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index cb38c2747684..8bff5fd18185 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -1336,6 +1336,28 @@ void extcon_dev_unregister(struct extcon_dev *edev)
EXPORT_SYMBOL_GPL(extcon_dev_unregister);
#ifdef CONFIG_OF
+
+/*
+ * extcon_find_edev_by_node - Find the extcon device from devicetree.
+ * @node : OF node identifying edev
+ *
+ * Return the pointer of extcon device if success or ERR_PTR(err) if fail.
+ */
+struct extcon_dev *extcon_find_edev_by_node(struct device_node *node)
+{
+ struct extcon_dev *edev;
+
+ mutex_lock(&extcon_dev_list_lock);
+ list_for_each_entry(edev, &extcon_dev_list, entry)
+ if (edev->dev.parent && edev->dev.parent->of_node == node)
+ goto out;
+ edev = ERR_PTR(-EPROBE_DEFER);
+out:
+ mutex_unlock(&extcon_dev_list_lock);
+
+ return edev;
+}
+
/*
* extcon_get_edev_by_phandle - Get the extcon device from devicetree.
* @dev : the instance to the given device
@@ -1363,25 +1385,27 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
return ERR_PTR(-ENODEV);
}
- mutex_lock(&extcon_dev_list_lock);
- list_for_each_entry(edev, &extcon_dev_list, entry) {
- if (edev->dev.parent && edev->dev.parent->of_node == node) {
- mutex_unlock(&extcon_dev_list_lock);
- of_node_put(node);
- return edev;
- }
- }
- mutex_unlock(&extcon_dev_list_lock);
+ edev = extcon_find_edev_by_node(node);
of_node_put(node);
- return ERR_PTR(-EPROBE_DEFER);
+ return edev;
}
+
#else
+
+struct extcon_dev *extcon_find_edev_by_node(struct device_node *node)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
{
return ERR_PTR(-ENOSYS);
}
+
#endif /* CONFIG_OF */
+
+EXPORT_SYMBOL_GPL(extcon_find_edev_by_node);
EXPORT_SYMBOL_GPL(extcon_get_edev_by_phandle);
/**
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index 86789f8918a4..7ab36042a822 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/extcon.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@@ -25,6 +26,7 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/of_graph.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
@@ -81,6 +83,10 @@ struct sii8620 {
struct edid *edid;
unsigned int gen2_write_burst:1;
enum sii8620_mt_state mt_state;
+ struct extcon_dev *extcon;
+ struct notifier_block extcon_nb;
+ struct work_struct extcon_wq;
+ int cable_state;
struct list_head mt_queue;
struct {
int r_size;
@@ -2170,6 +2176,77 @@ static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
ctx->rc_dev = rc_dev;
}
+static void sii8620_cable_out(struct sii8620 *ctx)
+{
+ disable_irq(to_i2c_client(ctx->dev)->irq);
+ sii8620_hw_off(ctx);
+}
+
+static void sii8620_extcon_work(struct work_struct *work)
+{
+ struct sii8620 *ctx =
+ container_of(work, struct sii8620, extcon_wq);
+ int state = extcon_get_state(ctx->extcon, EXTCON_DISP_MHL);
+
+ if (state == ctx->cable_state)
+ return;
+
+ ctx->cable_state = state;
+
+ if (state > 0)
+ sii8620_cable_in(ctx);
+ else
+ sii8620_cable_out(ctx);
+}
+
+static int sii8620_extcon_notifier(struct notifier_block *self,
+ unsigned long event, void *ptr)
+{
+ struct sii8620 *ctx =
+ container_of(self, struct sii8620, extcon_nb);
+
+ schedule_work(&ctx->extcon_wq);
+
+ return NOTIFY_DONE;
+}
+
+static int sii8620_extcon_init(struct sii8620 *ctx)
+{
+ struct extcon_dev *edev;
+ struct device_node *musb, *muic;
+ int ret;
+
+ /* get micro-USB connector node */
+ musb = of_graph_get_remote_node(ctx->dev->of_node, 1, -1);
+ /* next get micro-USB Interface Controller node */
+ muic = of_get_next_parent(musb);
+
+ if (!muic) {
+ dev_info(ctx->dev, "no extcon found, switching to 'always on' mode\n");
+ return 0;
+ }
+
+ edev = extcon_find_edev_by_node(muic);
+ of_node_put(muic);
+ if (IS_ERR(edev)) {
+ if (PTR_ERR(edev) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_err(ctx->dev, "Invalid or missing extcon\n");
+ return PTR_ERR(edev);
+ }
+
+ ctx->extcon = edev;
+ ctx->extcon_nb.notifier_call = sii8620_extcon_notifier;
+ INIT_WORK(&ctx->extcon_wq, sii8620_extcon_work);
+ ret = extcon_register_notifier(edev, EXTCON_DISP_MHL, &ctx->extcon_nb);
+ if (ret) {
+ dev_err(ctx->dev, "failed to register notifier for MHL\n");
+ return ret;
+ }
+
+ return 0;
+}
+
static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge)
{
return container_of(bridge, struct sii8620, bridge);
@@ -2302,13 +2379,20 @@ static int sii8620_probe(struct i2c_client *client,
if (ret)
return ret;
+ ret = sii8620_extcon_init(ctx);
+ if (ret < 0) {
+ dev_err(ctx->dev, "failed to initialize EXTCON\n");
+ return ret;
+ }
+
i2c_set_clientdata(client, ctx);
ctx->bridge.funcs = &sii8620_bridge_funcs;
ctx->bridge.of_node = dev->of_node;
drm_bridge_add(&ctx->bridge);
- sii8620_cable_in(ctx);
+ if (!ctx->extcon)
+ sii8620_cable_in(ctx);
return 0;
}
@@ -2317,8 +2401,15 @@ static int sii8620_remove(struct i2c_client *client)
{
struct sii8620 *ctx = i2c_get_clientdata(client);
- disable_irq(to_i2c_client(ctx->dev)->irq);
- sii8620_hw_off(ctx);
+ if (ctx->extcon) {
+ extcon_unregister_notifier(ctx->extcon, EXTCON_DISP_MHL,
+ &ctx->extcon_nb);
+ flush_work(&ctx->extcon_wq);
+ if (ctx->cable_state > 0)
+ sii8620_cable_out(ctx);
+ } else {
+ sii8620_cable_out(ctx);
+ }
drm_bridge_remove(&ctx->bridge);
return 0;
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 6d94e82c8ad9..7f033b1ea568 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -230,6 +230,7 @@ extern void devm_extcon_unregister_notifier_all(struct device *dev,
* Following APIs get the extcon_dev from devicetree or by through extcon name.
*/
extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name);
+extern struct extcon_dev *extcon_find_edev_by_node(struct device_node *node);
extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
int index);
@@ -283,6 +284,11 @@ static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
return ERR_PTR(-ENODEV);
}
+static inline struct extcon_dev *extcon_find_edev_by_node(struct device_node *node)
+{
+ return ERR_PTR(-ENODEV);
+}
+
static inline struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
int index)
{