diff options
| -rw-r--r-- | arch/arm/mach-ux500/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/pinctrl/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/pinctrl/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-ab9540.c | 485 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-abx500.c | 3 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-abx500.h | 13 |
6 files changed, 507 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 3e71dbdbd65d..b7c70e1734a7 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -22,6 +22,7 @@ config UX500_SOC_DB8500 select PINCTRL_DB8540 select PINCTRL_AB8500 select PINCTRL_AB8505 + select PINCTRL_AB9540 select REGULATOR select REGULATOR_DB8500_PRCMU diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index e7db9fa3e110..aea4ceb8d135 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -37,6 +37,10 @@ config PINCTRL_AB8500 bool "AB8500 pin controller driver" depends on PINCTRL_ABX500 && ARCH_U8500 +config PINCTRL_AB9540 + bool "AB9540 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + config PINCTRL_AB8505 bool "AB8505 pin controller driver" depends on PINCTRL_ABX500 && ARCH_U8500 diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 2cc0115cc6d9..e866b79c2cae 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -11,6 +11,7 @@ endif obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o +obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o diff --git a/drivers/pinctrl/pinctrl-ab9540.c b/drivers/pinctrl/pinctrl-ab9540.c new file mode 100644 index 000000000000..31fec3e5dd52 --- /dev/null +++ b/drivers/pinctrl/pinctrl-ab9540.c @@ -0,0 +1,485 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/mfd/abx500/ab8500.h> +#include "pinctrl-abx500.h" + +/* All the pins that can be used for GPIO and some other functions */ +#define ABX500_GPIO(offset) (offset) + +#define AB9540_PIN_R4 ABX500_GPIO(1) +#define AB9540_PIN_V3 ABX500_GPIO(2) +#define AB9540_PIN_T4 ABX500_GPIO(3) +#define AB9540_PIN_T5 ABX500_GPIO(4) +/* hole */ +#define AB9540_PIN_B18 ABX500_GPIO(10) +#define AB9540_PIN_C18 ABX500_GPIO(11) +/* hole */ +#define AB9540_PIN_D18 ABX500_GPIO(13) +#define AB9540_PIN_B19 ABX500_GPIO(14) +#define AB9540_PIN_C19 ABX500_GPIO(15) +#define AB9540_PIN_D19 ABX500_GPIO(16) +#define AB9540_PIN_R3 ABX500_GPIO(17) +#define AB9540_PIN_T2 ABX500_GPIO(18) +#define AB9540_PIN_U2 ABX500_GPIO(19) +#define AB9540_PIN_V2 ABX500_GPIO(20) +#define AB9540_PIN_N17 ABX500_GPIO(21) +#define AB9540_PIN_N16 ABX500_GPIO(22) +#define AB9540_PIN_M19 ABX500_GPIO(23) +#define AB9540_PIN_T3 ABX500_GPIO(24) +#define AB9540_PIN_W2 ABX500_GPIO(25) +/* hole */ +#define AB9540_PIN_H4 ABX500_GPIO(27) +#define AB9540_PIN_F1 ABX500_GPIO(28) +#define AB9540_PIN_F4 ABX500_GPIO(29) +#define AB9540_PIN_F2 ABX500_GPIO(30) +#define AB9540_PIN_E4 ABX500_GPIO(31) +#define AB9540_PIN_F3 ABX500_GPIO(32) +/* hole */ +#define AB9540_PIN_J13 ABX500_GPIO(34) +/* hole */ +#define AB9540_PIN_L17 ABX500_GPIO(40) +#define AB9540_PIN_L16 ABX500_GPIO(41) +#define AB9540_PIN_W3 ABX500_GPIO(42) +#define AB9540_PIN_N4 ABX500_GPIO(50) +#define AB9540_PIN_G12 ABX500_GPIO(51) +#define AB9540_PIN_E17 ABX500_GPIO(52) +#define AB9540_PIN_D11 ABX500_GPIO(53) +#define AB9540_PIN_M18 ABX500_GPIO(54) + +/* indicates the highest GPIO number */ +#define AB9540_GPIO_MAX_NUMBER 54 + +/* + * The names of the pins are denoted by GPIO number and ball name, even + * though they can be used for other things than GPIO, this is the first + * column in the table of the data sheet and often used on schematics and + * such. + */ +static const struct pinctrl_pin_desc ab9540_pins[] = { + PINCTRL_PIN(AB9540_PIN_R4, "GPIO1_R4"), + PINCTRL_PIN(AB9540_PIN_V3, "GPIO2_V3"), + PINCTRL_PIN(AB9540_PIN_T4, "GPIO3_T4"), + PINCTRL_PIN(AB9540_PIN_T5, "GPIO4_T5"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_B18, "GPIO10_B18"), + PINCTRL_PIN(AB9540_PIN_C18, "GPIO11_C18"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_D18, "GPIO13_D18"), + PINCTRL_PIN(AB9540_PIN_B19, "GPIO14_B19"), + PINCTRL_PIN(AB9540_PIN_C19, "GPIO15_C19"), + PINCTRL_PIN(AB9540_PIN_D19, "GPIO16_D19"), + PINCTRL_PIN(AB9540_PIN_R3, "GPIO17_R3"), + PINCTRL_PIN(AB9540_PIN_T2, "GPIO18_T2"), + PINCTRL_PIN(AB9540_PIN_U2, "GPIO19_U2"), + PINCTRL_PIN(AB9540_PIN_V2, "GPIO20_V2"), + PINCTRL_PIN(AB9540_PIN_N17, "GPIO21_N17"), + PINCTRL_PIN(AB9540_PIN_N16, "GPIO22_N16"), + PINCTRL_PIN(AB9540_PIN_M19, "GPIO23_M19"), + PINCTRL_PIN(AB9540_PIN_T3, "GPIO24_T3"), + PINCTRL_PIN(AB9540_PIN_W2, "GPIO25_W2"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_H4, "GPIO27_H4"), + PINCTRL_PIN(AB9540_PIN_F1, "GPIO28_F1"), + PINCTRL_PIN(AB9540_PIN_F4, "GPIO29_F4"), + PINCTRL_PIN(AB9540_PIN_F2, "GPIO30_F2"), + PINCTRL_PIN(AB9540_PIN_E4, "GPIO31_E4"), + PINCTRL_PIN(AB9540_PIN_F3, "GPIO32_F3"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_J13, "GPIO34_J13"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_L17, "GPIO40_L17"), + PINCTRL_PIN(AB9540_PIN_L16, "GPIO41_L16"), + PINCTRL_PIN(AB9540_PIN_W3, "GPIO42_W3"), + PINCTRL_PIN(AB9540_PIN_N4, "GPIO50_N4"), + PINCTRL_PIN(AB9540_PIN_G12, "GPIO51_G12"), + PINCTRL_PIN(AB9540_PIN_E17, "GPIO52_E17"), + PINCTRL_PIN(AB9540_PIN_D11, "GPIO53_D11"), + PINCTRL_PIN(AB9540_PIN_M18, "GPIO60_M18"), +}; + +/* + * Maps local GPIO offsets to local pin numbers + */ +static const struct abx500_pinrange ab9540_pinranges[] = { + ABX500_PINRANGE(1, 4, ABX500_ALT_A), + ABX500_PINRANGE(10, 2, ABX500_DEFAULT), + ABX500_PINRANGE(13, 1, ABX500_DEFAULT), + ABX500_PINRANGE(14, 12, ABX500_ALT_A), + ABX500_PINRANGE(27, 6, ABX500_ALT_A), + ABX500_PINRANGE(34, 1, ABX500_ALT_A), + ABX500_PINRANGE(40, 3, ABX500_ALT_A), + ABX500_PINRANGE(50, 1, ABX500_DEFAULT), + ABX500_PINRANGE(51, 3, ABX500_ALT_A), + ABX500_PINRANGE(54, 1, ABX500_DEFAULT), +}; + +/* + * Read the pin group names like this: + * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function + * + * The groups are arranged as sets per altfunction column, so we can + * mux in one group at a time by selecting the same altfunction for them + * all. When functions require pins on different altfunctions, you need + * to combine several groups. + */ + +/* default column */ +static const unsigned sysclkreq2_d_1_pins[] = { AB9540_PIN_R4 }; +static const unsigned sysclkreq3_d_1_pins[] = { AB9540_PIN_V3 }; +static const unsigned sysclkreq4_d_1_pins[] = { AB9540_PIN_T4 }; +static const unsigned sysclkreq6_d_1_pins[] = { AB9540_PIN_T5 }; +static const unsigned gpio10_d_1_pins[] = { AB9540_PIN_B18 }; +static const unsigned gpio11_d_1_pins[] = { AB9540_PIN_C18 }; +static const unsigned gpio13_d_1_pins[] = { AB9540_PIN_D18 }; +static const unsigned pwmout1_d_1_pins[] = { AB9540_PIN_B19 }; +static const unsigned pwmout2_d_1_pins[] = { AB9540_PIN_C19 }; +static const unsigned pwmout3_d_1_pins[] = { AB9540_PIN_D19 }; +/* audio data interface 1*/ +static const unsigned adi1_d_1_pins[] = { AB9540_PIN_R3, AB9540_PIN_T2, + AB9540_PIN_U2, AB9540_PIN_V2 }; +/* USBUICC */ +static const unsigned usbuicc_d_1_pins[] = { AB9540_PIN_N17, AB9540_PIN_N16, + AB9540_PIN_M19 }; +static const unsigned sysclkreq7_d_1_pins[] = { AB9540_PIN_T3 }; +static const unsigned sysclkreq8_d_1_pins[] = { AB9540_PIN_W2 }; +/* Digital microphone 1 and 2 */ +static const unsigned dmic12_d_1_pins[] = { AB9540_PIN_H4, AB9540_PIN_F1 }; +/* Digital microphone 3 and 4 */ +static const unsigned dmic34_d_1_pins[] = { AB9540_PIN_F4, AB9540_PIN_F2 }; +/* Digital microphone 5 and 6 */ +static const unsigned dmic56_d_1_pins[] = { AB9540_PIN_E4, AB9540_PIN_F3 }; +static const unsigned extcpena_d_1_pins[] = { AB9540_PIN_J13 }; +/* modem SDA/SCL */ +static const unsigned modsclsda_d_1_pins[] = { AB9540_PIN_L17, AB9540_PIN_L16 }; +static const unsigned sysclkreq5_d_1_pins[] = { AB9540_PIN_W3 }; +static const unsigned gpio50_d_1_pins[] = { AB9540_PIN_N4 }; +static const unsigned batremn_d_1_pins[] = { AB9540_PIN_G12 }; +static const unsigned resethw_d_1_pins[] = { AB9540_PIN_E17 }; +static const unsigned service_d_1_pins[] = { AB9540_PIN_D11 }; +static const unsigned gpio60_d_1_pins[] = { AB9540_PIN_M18 }; + +/* Altfunction A column */ +static const unsigned gpio1_a_1_pins[] = { AB9540_PIN_R4 }; +static const unsigned gpio2_a_1_pins[] = { AB9540_PIN_V3 }; +static const unsigned gpio3_a_1_pins[] = { AB9540_PIN_T4 }; +static const unsigned gpio4_a_1_pins[] = { AB9540_PIN_T5 }; +static const unsigned hiqclkena_a_1_pins[] = { AB9540_PIN_B18 }; +static const unsigned pdmclk_a_1_pins[] = { AB9540_PIN_C18 }; +static const unsigned uartdata_a_1_pins[] = { AB9540_PIN_D18, AB9540_PIN_N4 }; +static const unsigned gpio14_a_1_pins[] = { AB9540_PIN_B19 }; +static const unsigned gpio15_a_1_pins[] = { AB9540_PIN_C19 }; +static const unsigned gpio16_a_1_pins[] = { AB9540_PIN_D19 }; +static const unsigned gpio17_a_1_pins[] = { AB9540_PIN_R3 }; +static const unsigned gpio18_a_1_pins[] = { AB9540_PIN_T2 }; +static const unsigned gpio19_a_1_pins[] = { AB9540_PIN_U2 }; +static const unsigned gpio20_a_1_pins[] = { AB9540_PIN_V2 }; +static const unsigned gpio21_a_1_pins[] = { AB9540_PIN_N17 }; +static const unsigned gpio22_a_1_pins[] = { AB9540_PIN_N16 }; +static const unsigned gpio23_a_1_pins[] = { AB9540_PIN_M19 }; +static const unsigned gpio24_a_1_pins[] = { AB9540_PIN_T3 }; +static const unsigned gpio25_a_1_pins[] = { AB9540_PIN_W2 }; +static const unsigned gpio27_a_1_pins[] = { AB9540_PIN_H4 }; +static const unsigned gpio28_a_1_pins[] = { AB9540_PIN_F1 }; +static const unsigned gpio29_a_1_pins[] = { AB9540_PIN_F4 }; +static const unsigned gpio30_a_1_pins[] = { AB9540_PIN_F2 }; +static const unsigned gpio31_a_1_pins[] = { AB9540_PIN_E4 }; +static const unsigned gpio32_a_1_pins[] = { AB9540_PIN_F3 }; +static const unsigned gpio34_a_1_pins[] = { AB9540_PIN_J13 }; +static const unsigned gpio40_a_1_pins[] = { AB9540_PIN_L17 }; +static const unsigned gpio41_a_1_pins[] = { AB9540_PIN_L16 }; +static const unsigned gpio42_a_1_pins[] = { AB9540_PIN_W3 }; +static const unsigned gpio51_a_1_pins[] = { AB9540_PIN_G12 }; +static const unsigned gpio52_a_1_pins[] = { AB9540_PIN_E17 }; +static const unsigned gpio53_a_1_pins[] = { AB9540_PIN_D11 }; +static const unsigned usbuiccpd_a_1_pins[] = { AB9540_PIN_M18 }; + +/* Altfunction B colum */ +static const unsigned pdmdata_b_1_pins[] = { AB9540_PIN_B18 }; +static const unsigned pwmextvibra1_b_1_pins[] = { AB9540_PIN_D18 }; +static const unsigned pwmextvibra2_b_1_pins[] = { AB9540_PIN_N4 }; + +/* Altfunction C column */ +static const unsigned usbvdat_c_1_pins[] = { AB9540_PIN_D18 }; + +#define AB9540_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \ + .npins = ARRAY_SIZE(a##_pins), .altsetting = b } + +static const struct abx500_pingroup ab9540_groups[] = { + /* default column */ + AB9540_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(adi1_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(batremn_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(resethw_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(service_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio60_d_1, ABX500_DEFAULT), + + /* Altfunction A column */ + AB9540_PIN_GROUP(gpio1_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio2_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio3_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio4_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(uartdata_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio14_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio15_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio16_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio17_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio18_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio19_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio20_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio21_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio22_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio23_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio24_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio25_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio27_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio28_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio29_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio30_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio31_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio32_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio34_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio40_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio41_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio42_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio51_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio52_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio53_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(usbuiccpd_a_1, ABX500_ALT_A), + + /* Altfunction B column */ + AB9540_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B), + AB9540_PIN_GROUP(pwmextvibra1_b_1, ABX500_ALT_B), + AB9540_PIN_GROUP(pwmextvibra2_b_1, ABX500_ALT_B), + + /* Altfunction C column */ + AB9540_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C), +}; + +/* We use this macro to define the groups applicable to a function */ +#define AB9540_FUNC_GROUPS(a, b...) \ +static const char * const a##_groups[] = { b }; + +AB9540_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1", + "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1", + "sysclkreq7_d_1", "sysclkreq8_d_1"); +AB9540_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1", + "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1", + "gpio15_a_1", "gpio16_a_1", "gpio17_a_1", "gpio18_a_1", + "gpio19_a_1", "gpio20_a_1", "gpio21_a_1", "gpio22_a_1", + "gpio23_a_1", "gpio24_a_1", "gpio25_a_1", "gpio27_a_1", + "gpio28_a_1", "gpio29_a_1", "gpio30_a_1", "gpio31_a_1", + "gpio32_a_1", "gpio34_a_1", "gpio40_a_1", "gpio41_a_1", + "gpio42_a_1", "gpio50_d_1", "gpio51_a_1", "gpio52_a_1", + "gpio53_a_1", "gpio60_d_1"); +AB9540_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1"); +AB9540_FUNC_GROUPS(adi1, "adi1_d_1"); +AB9540_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_a_1"); +AB9540_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1"); +AB9540_FUNC_GROUPS(extcpena, "extcpena_d_1"); +AB9540_FUNC_GROUPS(modsclsda, "modsclsda_d_1"); +AB9540_FUNC_GROUPS(batremn, "batremn_d_1"); +AB9540_FUNC_GROUPS(resethw, "resethw_d_1"); +AB9540_FUNC_GROUPS(service, "service_d_1"); +AB9540_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1"); +AB9540_FUNC_GROUPS(pdm, "pdmdata_b_1", "pdmclk_a_1"); +AB9540_FUNC_GROUPS(uartdata, "uartdata_a_1"); +AB9540_FUNC_GROUPS(pwmextvibra, "pwmextvibra1_b_1", "pwmextvibra2_b_1"); +AB9540_FUNC_GROUPS(usbvdat, "usbvdat_c_1"); + +#define FUNCTION(fname) \ + { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +static const struct abx500_function ab9540_functions[] = { + FUNCTION(sysclkreq), + FUNCTION(gpio), + FUNCTION(pwmout), + FUNCTION(adi1), + FUNCTION(usbuicc), + FUNCTION(dmic), + FUNCTION(extcpena), + FUNCTION(modsclsda), + FUNCTION(batremn), + FUNCTION(resethw), + FUNCTION(service), + FUNCTION(hiqclkena), + FUNCTION(pdm), + FUNCTION(uartdata), + FUNCTION(pwmextvibra), + FUNCTION(usbvdat), +}; + +/* + * this table translates what's is in the AB9540 specification regarding the + * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C). + * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1, + * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val), + * + * example : + * + * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), + * means that pin AB9540_PIN_D18 (pin 13) supports 4 mux (default/ALT_A, + * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to + * select the mux. ALTA, ALTB and ALTC val indicates values to write in + * ALTERNATFUNC register. We need to specifies these values as SOC + * designers didn't apply the same logic on how to select mux in the + * ABx500 family. + * + * As this pins supports at least ALT_B mux, default mux is + * selected by writing 1 in GPIOSEL bit : + * + * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3 + * default | 1 | 0 | 0 + * alt_A | 0 | 0 | 1 + * alt_B | 0 | 0 | 0 + * alt_C | 0 | 1 | 0 + * + * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED), + * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL + * register is used to select the mux. As this pins doesn't support at + * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit : + * + * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1= + * default | 0 | 0 | 0 + * alt_A | 1 | 0 | 0 + */ + +struct alternate_functions ab9540alternate_functions[AB9540_GPIO_MAX_NUMBER + 1] = { + /* GPIOSEL1 - bits 4-7 are reserved */ + ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */ + ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/ + ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/ + ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */ + ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6 */ + ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7 */ + ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8 */ + /* GPIOSEL2 - bits 0 and 3 are reserved */ + ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9 */ + ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */ + ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12 */ + ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */ + ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */ + /* GPIOSEL3 - bit 1-3 reserved + * pins 17 to 20 are special case, only bit 0 is used to select + * alternate function for these 4 pins. + * bits 1 to 3 are reserved + */ + ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(21, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(22, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(23, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(24, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */ + /* GPIOSEL4 - bit 1 reserved */ + ALTERNATE_FUNCTIONS(25, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26 */ + ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */ + /* GPIOSEL5 - bit 0, 2-6 are reserved */ + ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */ + ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35 */ + ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36 */ + ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37 */ + ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38 */ + ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39 */ + ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */ + /* GPIOSEL6 - bit 2-7 are reserved */ + ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43 */ + ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44 */ + ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45 */ + ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46 */ + ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47 */ + ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48 */ + /* + * GPIOSEL7 - bit 0 and 6-7 are reserved + * special case with GPIO60, wich is located at offset 5 of gpiosel7 + * don't know why it has been called GPIO60 in AB9540 datasheet, + * GPIO54 would be logical..., so at SOC point of view we consider + * GPIO60 = GPIO54 + */ + ALTERNATE_FUNCTIONS(49, 0, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49 */ + ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA and altB controlled by bit 1 */ + ALTERNATE_FUNCTIONS(51, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO51, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(54, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO54 = GPIO60, altA controlled by bit 5 */ +}; + +struct abx500_gpio_irq_cluster ab9540_gpio_irq_cluster[] = { + GPIO_IRQ_CLUSTER(9, 12, 0), /* GPIO numbers start from 1 */ + GPIO_IRQ_CLUSTER(23, 24, 0), + GPIO_IRQ_CLUSTER(39, 40, 0), + GPIO_IRQ_CLUSTER(49, 53, 0), +}; + +static struct abx500_pinctrl_soc_data ab9540_soc = { + .gpio_ranges = ab9540_pinranges, + .gpio_num_ranges = ARRAY_SIZE(ab9540_pinranges), + .pins = ab9540_pins, + .npins = ARRAY_SIZE(ab9540_pins), + .functions = ab9540_functions, + .nfunctions = ARRAY_SIZE(ab9540_functions), + .groups = ab9540_groups, + .ngroups = ARRAY_SIZE(ab9540_groups), + .alternate_functions = ab9540alternate_functions, + .gpio_irq_cluster = ab9540_gpio_irq_cluster, + .ngpio_irq_cluster = ARRAY_SIZE(ab9540_gpio_irq_cluster), + .irq_gpio_rising_offset = AB8500_INT_GPIO6R, + .irq_gpio_falling_offset = AB8500_INT_GPIO6F, + .irq_gpio_factor = 1, +}; + +void +abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc) +{ + *soc = &ab9540_soc; +} diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 94f9381fb3eb..39020ac108ba 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -1119,6 +1119,9 @@ static int abx500_gpio_probe(struct platform_device *pdev) case PINCTRL_AB8500: abx500_pinctrl_ab8500_init(&pct->soc); break; + case PINCTRL_AB9540: + abx500_pinctrl_ab9540_init(&pct->soc); + break; case PINCTRL_AB8505: abx500_pinctrl_ab8505_init(&pct->soc); break; diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h index 5c5ac7566d27..fe1ccb76c509 100644 --- a/drivers/pinctrl/pinctrl-abx500.h +++ b/drivers/pinctrl/pinctrl-abx500.h @@ -190,6 +190,19 @@ abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc) #endif +#ifdef CONFIG_PINCTRL_AB9540 + +void abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc); + +#else + +static inline void +abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc) +{ +} + +#endif + #ifdef CONFIG_PINCTRL_AB8505 void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc); |