summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/kernel/Makefile1
-rw-r--r--arch/powerpc/kernel/crash_dump.c53
-rw-r--r--arch/powerpc/kernel/prom.c6
-rw-r--r--arch/powerpc/kernel/setup_64.c5
-rw-r--r--include/asm-powerpc/kdump.h13
5 files changed, 77 insertions, 1 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 89714929f444..5719248d344d 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
ifeq ($(CONFIG_PPC_MERGE),y)
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
new file mode 100644
index 000000000000..63919bcfc9fe
--- /dev/null
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -0,0 +1,53 @@
+/*
+ * Routines for doing kexec-based kdump.
+ *
+ * Copyright (C) 2005, IBM Corp.
+ *
+ * Created by: Michael Ellerman
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#undef DEBUG
+
+#include <asm/kdump.h>
+#include <asm/lmb.h>
+#include <asm/firmware.h>
+
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+static void __init create_trampoline(unsigned long addr)
+{
+ /* The maximum range of a single instruction branch, is the current
+ * instruction's address + (32 MB - 4) bytes. For the trampoline we
+ * need to branch to current address + 32 MB. So we insert a nop at
+ * the trampoline address, then the next instruction (+ 4 bytes)
+ * does a branch to (32 MB - 4). The net effect is that when we
+ * branch to "addr" we jump to ("addr" + 32 MB). Although it requires
+ * two instructions it doesn't require any registers.
+ */
+ create_instruction(addr, 0x60000000); /* nop */
+ create_branch(addr + 4, addr + PHYSICAL_START, 0);
+}
+
+void __init kdump_setup(void)
+{
+ unsigned long i;
+
+ DBG(" -> kdump_setup()\n");
+
+ for (i = KDUMP_TRAMPOLINE_START; i < KDUMP_TRAMPOLINE_END; i += 8) {
+ create_trampoline(i);
+ }
+
+ create_trampoline(__pa(system_reset_fwnmi) - PHYSICAL_START);
+ create_trampoline(__pa(machine_check_fwnmi) - PHYSICAL_START);
+
+ DBG(" <- kdump_setup()\n");
+}
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 3bf968e74095..9aac77ca3167 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -37,6 +37,7 @@
#include <asm/processor.h>
#include <asm/irq.h>
#include <asm/io.h>
+#include <asm/kdump.h>
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/mmu.h>
@@ -1335,11 +1336,14 @@ void __init early_init_devtree(void *params)
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
lmb_enforce_memory_limit(memory_limit);
lmb_analyze();
- lmb_reserve(0, __pa(klimit));
DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
/* Reserve LMB regions used by kernel, initrd, dt, etc... */
+ lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+#ifdef CONFIG_CRASH_DUMP
+ lmb_reserve(0, KDUMP_RESERVE_LIMIT);
+#endif
early_reserve_mem();
DBG("Scanning CPUs ...\n");
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 6509dd7c2f8f..e67120e34652 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -34,6 +34,7 @@
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
+#include <asm/kdump.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
@@ -268,6 +269,10 @@ void __init early_setup(unsigned long dt_ptr)
}
ppc_md = **mach;
+#ifdef CONFIG_CRASH_DUMP
+ kdump_setup();
+#endif
+
DBG("Found, Initializing memory management...\n");
/*
diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h
new file mode 100644
index 000000000000..a87aed00d61f
--- /dev/null
+++ b/include/asm-powerpc/kdump.h
@@ -0,0 +1,13 @@
+#ifndef _PPC64_KDUMP_H
+#define _PPC64_KDUMP_H
+
+/* How many bytes to reserve at zero for kdump. The reserve limit should
+ * be greater or equal to the trampoline's end address. */
+#define KDUMP_RESERVE_LIMIT 0x8000
+
+#define KDUMP_TRAMPOLINE_START 0x0100
+#define KDUMP_TRAMPOLINE_END 0x3000
+
+extern void kdump_setup(void);
+
+#endif /* __PPC64_KDUMP_H */