summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/wan/cycx_drv.c569
-rw-r--r--drivers/net/wan/cycx_main.c346
-rw-r--r--drivers/net/wan/cycx_x25.c1602
-rw-r--r--include/linux/cyclomx.h77
-rw-r--r--include/linux/cycx_drv.h64
-rw-r--r--include/linux/wanrouter.h127
-rw-r--r--include/uapi/linux/wanrouter.h443
-rw-r--r--net/wanrouter/Kconfig27
-rw-r--r--net/wanrouter/Makefile7
-rw-r--r--net/wanrouter/patchlevel1
-rw-r--r--net/wanrouter/wanmain.c782
-rw-r--r--net/wanrouter/wanproc.c380
12 files changed, 8 insertions, 4417 deletions
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
deleted file mode 100644
index 2a3ecae67a90..000000000000
--- a/drivers/net/wan/cycx_drv.c
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
-* cycx_drv.c Cyclom 2X Support Module.
-*
-* This module is a library of common hardware specific
-* functions used by the Cyclades Cyclom 2X sync card.
-*
-* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdladrv.c by Gene Kozin <genek@compuserve.com>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* 1999/11/11 acme set_current_state(TASK_INTERRUPTIBLE), code
-* cleanup
-* 1999/11/08 acme init_cyc2x deleted, doing nothing
-* 1999/11/06 acme back to read[bw], write[bw] and memcpy_to and
-* fromio to use dpmbase ioremaped
-* 1999/10/26 acme use isa_read[bw], isa_write[bw] & isa_memcpy_to
-* & fromio
-* 1999/10/23 acme cleanup to only supports cyclom2x: all the other
-* boards are no longer manufactured by cyclades,
-* if someone wants to support them... be my guest!
-* 1999/05/28 acme cycx_intack & cycx_intde gone for good
-* 1999/05/18 acme lots of unlogged work, submitting to Linus...
-* 1999/01/03 acme more judicious use of data types
-* 1999/01/03 acme judicious use of data types :>
-* cycx_inten trying to reset pending interrupts
-* from cyclom 2x - I think this isn't the way to
-* go, but for now...
-* 1999/01/02 acme cycx_intack ok, I think there's nothing to do
-* to ack an int in cycx_drv.c, only handle it in
-* cyx_isr (or in the other protocols: cyp_isr,
-* cyf_isr, when they get implemented.
-* Dec 31, 1998 acme cycx_data_boot & cycx_code_boot fixed, crossing
-* fingers to see x25_configure in cycx_x25.c
-* work... :)
-* Dec 26, 1998 acme load implementation fixed, seems to work! :)
-* cycx_2x_dpmbase_options with all the possible
-* DPM addresses (20).
-* cycx_intr implemented (test this!)
-* general code cleanup
-* Dec 8, 1998 Ivan Passos Cyclom-2X firmware load implementation.
-* Aug 8, 1998 acme Initial version.
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h> /* __init */
-#include <linux/module.h>
-#include <linux/kernel.h> /* printk(), and other useful stuff */
-#include <linux/stddef.h> /* offsetof(), etc. */
-#include <linux/errno.h> /* return codes */
-#include <linux/cycx_drv.h> /* API definitions */
-#include <linux/cycx_cfm.h> /* CYCX firmware module definitions */
-#include <linux/delay.h> /* udelay, msleep_interruptible */
-#include <asm/io.h> /* read[wl], write[wl], ioremap, iounmap */
-
-#define MOD_VERSION 0
-#define MOD_RELEASE 6
-
-MODULE_AUTHOR("Arnaldo Carvalho de Melo");
-MODULE_DESCRIPTION("Cyclom 2x Sync Card Driver");
-MODULE_LICENSE("GPL");
-
-/* Hardware-specific functions */
-static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len);
-static void cycx_bootcfg(struct cycx_hw *hw);
-
-static int reset_cyc2x(void __iomem *addr);
-static int detect_cyc2x(void __iomem *addr);
-
-/* Miscellaneous functions */
-static int get_option_index(const long *optlist, long optval);
-static u16 checksum(u8 *buf, u32 len);
-
-#define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET)
-
-/* Global Data */
-
-/* private data */
-static const char fullname[] = "Cyclom 2X Support Module";
-static const char copyright[] =
- "(c) 1998-2003 Arnaldo Carvalho de Melo <acme@conectiva.com.br>";
-
-/* Hardware configuration options.
- * These are arrays of configuration options used by verification routines.
- * The first element of each array is its size (i.e. number of options).
- */
-static const long cyc2x_dpmbase_options[] = {
- 20,
- 0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000,
- 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000,
- 0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000
-};
-
-static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 };
-
-/* Kernel Loadable Module Entry Points */
-/* Module 'insert' entry point.
- * o print announcement
- * o initialize static data
- *
- * Return: 0 Ok
- * < 0 error.
- * Context: process */
-
-static int __init cycx_drv_init(void)
-{
- pr_info("%s v%u.%u %s\n",
- fullname, MOD_VERSION, MOD_RELEASE, copyright);
-
- return 0;
-}
-
-/* Module 'remove' entry point.
- * o release all remaining system resources */
-static void cycx_drv_cleanup(void)
-{
-}
-
-/* Kernel APIs */
-/* Set up adapter.
- * o detect adapter type
- * o verify hardware configuration options
- * o check for hardware conflicts
- * o set up adapter shared memory
- * o test adapter memory
- * o load firmware
- * Return: 0 ok.
- * < 0 error */
-EXPORT_SYMBOL(cycx_setup);
-int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase)
-{
- int err;
-
- /* Verify IRQ configuration options */
- if (!get_option_index(cycx_2x_irq_options, hw->irq)) {
- pr_err("IRQ %d is invalid!\n", hw->irq);
- return -EINVAL;
- }
-
- /* Setup adapter dual-port memory window and test memory */
- if (!dpmbase) {
- pr_err("you must specify the dpm address!\n");
- return -EINVAL;
- } else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) {
- pr_err("memory address 0x%lX is invalid!\n", dpmbase);
- return -EINVAL;
- }
-
- hw->dpmbase = ioremap(dpmbase, CYCX_WINDOWSIZE);
- hw->dpmsize = CYCX_WINDOWSIZE;
-
- if (!detect_cyc2x(hw->dpmbase)) {
- pr_err("adapter Cyclom 2X not found at address 0x%lX!\n",
- dpmbase);
- return -EINVAL;
- }
-
- pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase);
-
- /* Load firmware. If loader fails then shut down adapter */
- err = load_cyc2x(hw, cfm, len);
-
- if (err)
- cycx_down(hw); /* shutdown adapter */
-
- return err;
-}
-
-EXPORT_SYMBOL(cycx_down);
-int cycx_down(struct cycx_hw *hw)
-{
- iounmap(hw->dpmbase);
- return 0;
-}
-
-/* Enable interrupt generation. */
-static void cycx_inten(struct cycx_hw *hw)
-{
- writeb(0, hw->dpmbase);
-}
-
-/* Generate an interrupt to adapter's CPU. */
-EXPORT_SYMBOL(cycx_intr);
-void cycx_intr(struct cycx_hw *hw)
-{
- writew(0, hw->dpmbase + GEN_CYCX_INTR);
-}
-
-/* Execute Adapter Command.
- * o Set exec flag.
- * o Busy-wait until flag is reset. */
-EXPORT_SYMBOL(cycx_exec);
-int cycx_exec(void __iomem *addr)
-{
- u16 i = 0;
- /* wait till addr content is zeroed */
-
- while (readw(addr)) {
- udelay(1000);
-
- if (++i > 50)
- return -1;
- }
-
- return 0;
-}
-
-/* Read absolute adapter memory.
- * Transfer data from adapter's memory to data buffer. */
-EXPORT_SYMBOL(cycx_peek);
-int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len)
-{
- if (len == 1)
- *(u8*)buf = readb(hw->dpmbase + addr);
- else
- memcpy_fromio(buf, hw->dpmbase + addr, len);
-
- return 0;
-}
-
-/* Write Absolute Adapter Memory.
- * Transfer data from data buffer to adapter's memory. */
-EXPORT_SYMBOL(cycx_poke);
-int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len)
-{
- if (len == 1)
- writeb(*(u8*)buf, hw->dpmbase + addr);
- else
- memcpy_toio(hw->dpmbase + addr, buf, len);
-
- return 0;
-}
-
-/* Hardware-Specific Functions */
-
-/* Load Aux Routines */
-/* Reset board hardware.
- return 1 if memory exists at addr and 0 if not. */
-static int memory_exists(void __iomem *addr)
-{
- int tries = 0;
-
- for (; tries < 3 ; tries++) {
- writew(TEST_PATTERN, addr + 0x10);
-
- if (readw(addr + 0x10) == TEST_PATTERN)
- if (readw(addr + 0x10) == TEST_PATTERN)
- return 1;
-
- msleep_interruptible(1 * 1000);
- }
-
- return 0;
-}
-
-/* Load reset code. */
-static void reset_load(void __iomem *addr, u8 *buffer, u32 cnt)
-{
- void __iomem *pt_code = addr + RESET_OFFSET;
- u16 i; /*, j; */
-
- for (i = 0 ; i < cnt ; i++) {
-/* for (j = 0 ; j < 50 ; j++); Delay - FIXME busy waiting... */
- writeb(*buffer++, pt_code++);
- }
-}
-
-/* Load buffer using boot interface.
- * o copy data from buffer to Cyclom-X memory
- * o wait for reset code to copy it to right portion of memory */
-static int buffer_load(void __iomem *addr, u8 *buffer, u32 cnt)
-{
- memcpy_toio(addr + DATA_OFFSET, buffer, cnt);
- writew(GEN_BOOT_DAT, addr + CMD_OFFSET);
-
- return wait_cyc(addr);
-}
-
-/* Set up entry point and kick start Cyclom-X CPU. */
-static void cycx_start(void __iomem *addr)
-{
- /* put in 0x30 offset the jump instruction to the code entry point */
- writeb(0xea, addr + 0x30);
- writeb(0x00, addr + 0x31);
- writeb(0xc4, addr + 0x32);
- writeb(0x00, addr + 0x33);
- writeb(0x00, addr + 0x34);
-
- /* cmd to start executing code */
- writew(GEN_START, addr + CMD_OFFSET);
-}
-
-/* Load and boot reset code. */
-static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len)
-{
- void __iomem *pt_start = addr + START_OFFSET;
-
- writeb(0xea, pt_start++); /* jmp to f000:3f00 */
- writeb(0x00, pt_start++);
- writeb(0xfc, pt_start++);
- writeb(0x00, pt_start++);
- writeb(0xf0, pt_start);
- reset_load(addr, code, len);
-
- /* 80186 was in hold, go */
- writeb(0, addr + START_CPU);
- msleep_interruptible(1 * 1000);
-}
-
-/* Load data.bin file through boot (reset) interface. */
-static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len)
-{
- void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
- u32 i;
-
- /* boot buffer length */
- writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
- writew(GEN_DEFPAR, pt_boot_cmd);
-
- if (wait_cyc(addr) < 0)
- return -1;
-
- writew(0, pt_boot_cmd + sizeof(u16));
- writew(0x4000, pt_boot_cmd + 2 * sizeof(u16));
- writew(GEN_SET_SEG, pt_boot_cmd);
-
- if (wait_cyc(addr) < 0)
- return -1;
-
- for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
- if (buffer_load(addr, code + i,
- min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) {
- pr_err("Error !!\n");
- return -1;
- }
-
- return 0;
-}
-
-
-/* Load code.bin file through boot (reset) interface. */
-static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len)
-{
- void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
- u32 i;
-
- /* boot buffer length */
- writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
- writew(GEN_DEFPAR, pt_boot_cmd);
-
- if (wait_cyc(addr) < 0)
- return -1;
-
- writew(0x0000, pt_boot_cmd + sizeof(u16));
- writew(0xc400, pt_boot_cmd + 2 * sizeof(u16));
- writew(GEN_SET_SEG, pt_boot_cmd);
-
- if (wait_cyc(addr) < 0)
- return -1;
-
- for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
- if (buffer_load(addr, code + i,
- min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) {
- pr_err("Error !!\n");
- return -1;
- }
-
- return 0;
-}
-
-/* Load adapter from the memory image of the CYCX firmware module.
- * o verify firmware integrity and compatibility
- * o start adapter up */
-static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len)
-{
- int i, j;
- struct cycx_fw_header *img_hdr;
- u8 *reset_image,
- *data_image,
- *code_image;
- void __iomem *pt_cycld = hw->dpmbase + 0x400;
- u16 cksum;
-
- /* Announce */
- pr_info("firmware signature=\"%s\"\n", cfm->signature);
-
- /* Verify firmware signature */
- if (strcmp(cfm->signature, CFM_SIGNATURE)) {
- pr_err("load_cyc2x: not Cyclom-2X firmware!\n");
- return -EINVAL;
- }
-
- pr_info("firmware version=%u\n", cfm->version);
-
- /* Verify firmware module format version */
- if (cfm->version != CFM_VERSION) {
- pr_err("%s: firmware format %u rejected! Expecting %u.\n",
- __func__, cfm->version, CFM_VERSION);
- return -EINVAL;
- }
-
- /* Verify firmware module length and checksum */
- cksum = checksum((u8*)&cfm->info, sizeof(struct cycx_fw_info) +
- cfm->info.codesize);
-/*
- FIXME cfm->info.codesize is off by 2
- if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) ||
-*/
- if (cksum != cfm->checksum) {
- pr_err("%s: firmware corrupted!\n", __func__);
- pr_err(" cdsize = 0x%x (expected 0x%lx)\n",
- len - (int)sizeof(struct cycx_firmware) - 1,
- cfm->info.codesize);
- pr_err(" chksum = 0x%x (expected 0x%x)\n",
- cksum, cfm->checksum);
- return -EINVAL;
- }
-
- /* If everything is ok, set reset, data and code pointers */
- img_hdr = (struct cycx_fw_header *)&cfm->image;
-#ifdef FIRMWARE_DEBUG
- pr_info("%s: image sizes\n", __func__);
- pr_info(" reset=%lu\n", img_hdr->reset_size);
- pr_info(" data=%lu\n", img_hdr->data_size);
- pr_info(" code=%lu\n", img_hdr->code_size);
-#endif
- reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header);
- data_image = reset_image + img_hdr->reset_size;
- code_image = data_image + img_hdr->data_size;
-
- /*---- Start load ----*/
- /* Announce */
- pr_info("loading firmware %s (ID=%u)...\n",
- cfm->descr[0] ? cfm->descr : "unknown firmware",
- cfm->info.codeid);
-
- for (i = 0 ; i < 5 ; i++) {
- /* Reset Cyclom hardware */
- if (!reset_cyc2x(hw->dpmbase)) {
- pr_err("dpm problem or board not found\n");
- return -EINVAL;
- }
-
- /* Load reset.bin */
- cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size);
- /* reset is waiting for boot */
- writew(GEN_POWER_ON, pt_cycld);
- msleep_interruptible(1 * 1000);
-
- for (j = 0 ; j < 3 ; j++)
- if (!readw(pt_cycld))
- goto reset_loaded;
- else
- msleep_interruptible(1 * 1000);
- }
-
- pr_err("reset not started\n");
- return -EINVAL;
-
-reset_loaded:
- /* Load data.bin */
- if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) {
- pr_err("cannot load data file\n");
- return -EINVAL;
- }
-
- /* Load code.bin */
- if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) {
- pr_err("cannot load code file\n");
- return -EINVAL;
- }
-
- /* Prepare boot-time configuration data */
- cycx_bootcfg(hw);
-
- /* kick-off CPU */
- cycx_start(hw->dpmbase);
-
- /* Arthur Ganzert's tip: wait a while after the firmware loading...
- seg abr 26 17:17:12 EST 1999 - acme */
- msleep_interruptible(7 * 1000);
- pr_info("firmware loaded!\n");
-
- /* enable interrupts */
- cycx_inten(hw);
-
- return 0;
-}
-
-/* Prepare boot-time firmware configuration data.
- * o initialize configuration data area
- From async.doc - V_3.4.0 - 07/18/1994
- - As of now, only static buffers are available to the user.
- So, the bit VD_RXDIRC must be set in 'valid'. That means that user
- wants to use the static transmission and reception buffers. */
-static void cycx_bootcfg(struct cycx_hw *hw)
-{
- /* use fixed buffers */
- writeb(FIXED_BUFFERS, hw->dpmbase + CONF_OFFSET);
-}
-
-/* Detect Cyclom 2x adapter.
- * Following tests are used to detect Cyclom 2x adapter:
- * to be completed based on the tests done below
- * Return 1 if detected o.k. or 0 if failed.
- * Note: This test is destructive! Adapter will be left in shutdown
- * state after the test. */
-static int detect_cyc2x(void __iomem *addr)
-{
- reset_cyc2x(addr);
-
- return memory_exists(addr);
-}
-
-/* Miscellaneous */
-/* Get option's index into the options list.
- * Return option's index (1 .. N) or zero if option is invalid. */
-static int get_option_index(const long *optlist, long optval)
-{
- int i = 1;
-
- for (; i <= optlist[0]; ++i)
- if (optlist[i] == optval)
- return i;
-
- return 0;
-}
-
-/* Reset adapter's CPU. */
-static int reset_cyc2x(void __iomem *addr)
-{
- writeb(0, addr + RST_ENABLE);
- msleep_interruptible(2 * 1000);
- writeb(0, addr + RST_DISABLE);
- msleep_interruptible(2 * 1000);
-
- return memory_exists(addr);
-}
-
-/* Calculate 16-bit CRC using CCITT polynomial. */
-static u16 checksum(u8 *buf, u32 len)
-{
- u16 crc = 0;
- u16 mask, flag;
-
- for (; len; --len, ++buf)
- for (mask = 0x80; mask; mask >>= 1) {
- flag = (crc & 0x8000);
- crc <<= 1;
- crc |= ((*buf & mask) ? 1 : 0);
-
- if (flag)
- crc ^= 0x1021;
- }
-
- return crc;
-}
-
-module_init(cycx_drv_init);
-module_exit(cycx_drv_cleanup);
-
-/* End */
diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c
deleted file mode 100644
index 81fbbad406be..000000000000
--- a/drivers/net/wan/cycx_main.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
-* cycx_main.c Cyclades Cyclom 2X WAN Link Driver. Main module.
-*
-* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdlamain.c by Gene Kozin <genek@compuserve.com> &
-* Jaspreet Singh <jaspreet@sangoma.com>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* Please look at the bitkeeper changelog (or any other scm tool that ends up
-* importing bitkeeper changelog or that replaces bitkeeper in the future as
-* main tool for linux development).
-*
-* 2001/05/09 acme Fix MODULE_DESC for debug, .bss nitpicks,
-* some cleanups
-* 2000/07/13 acme remove useless #ifdef MODULE and crap
-* #if KERNEL_VERSION > blah
-* 2000/07/06 acme __exit at cyclomx_cleanup
-* 2000/04/02 acme dprintk and cycx_debug
-* module_init/module_exit
-* 2000/01/21 acme rename cyclomx_open to cyclomx_mod_inc_use_count
-* and cyclomx_close to cyclomx_mod_dec_use_count
-* 2000/01/08 acme cleanup
-* 1999/11/06 acme cycx_down back to life (it needs to be
-* called to iounmap the dpmbase)
-* 1999/08/09 acme removed references to enable_tx_int
-* use spinlocks instead of cli/sti in
-* cyclomx_set_state
-* 1999/05/19 acme works directly linked into the kernel
-* init_waitqueue_head for 2.3.* kernel
-* 1999/05/18 acme major cleanup (polling not needed), etc
-* 1998/08/28 acme minor cleanup (ioctls for firmware deleted)
-* queue_task activated
-* 1998/08/08 acme Initial version.
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/stddef.h> /* offsetof(), etc. */
-#include <linux/errno.h> /* return codes */
-#include <linux/string.h> /* inline memset(), etc. */
-#include <linux/slab.h> /* kmalloc(), kfree() */
-#include <linux/kernel.h> /* printk(), and other useful stuff */
-#include <linux/module.h> /* support for loadable modules */
-#include <linux/ioport.h> /* request_region(), release_region() */
-#include <linux/wanrouter.h> /* WAN router definitions */
-#include <linux/cyclomx.h> /* cyclomx common user API definitions */
-#include <linux/init.h> /* __init (when not using as a module) */
-#include <linux/interrupt.h>
-
-unsigned int cycx_debug;
-
-MODULE_AUTHOR("Arnaldo Carvalho de Melo");
-MODULE_DESCRIPTION("Cyclom 2X Sync Card Driver.");
-MODULE_LICENSE("GPL");
-module_param(cycx_debug, int, 0);
-MODULE_PARM_DESC(cycx_debug, "cyclomx debug level");
-
-/* Defines & Macros */
-
-#define CYCX_DRV_VERSION 0 /* version number */
-#define CYCX_DRV_RELEASE 11 /* release (minor version) number */
-#define CYCX_MAX_CARDS 1 /* max number of adapters */
-
-#define CONFIG_CYCX_CARDS 1
-
-/* Function Prototypes */
-
-/* WAN link driver entry points */
-static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf);
-static int cycx_wan_shutdown(struct wan_device *wandev);
-
-/* Miscellaneous functions */
-static irqreturn_t cycx_isr(int irq, void *dev_id);
-
-/* Global Data
- * Note: All data must be explicitly initialized!!!
- */
-
-/* private data */
-static const char cycx_drvname[] = "cyclomx";
-static const char cycx_fullname[] = "CYCLOM 2X(tm) Sync Card Driver";
-static const char cycx_copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo "
- "<acme@conectiva.com.br>";
-static int cycx_ncards = CONFIG_CYCX_CARDS;
-static struct cycx_device *cycx_card_array; /* adapter data space */
-
-/* Kernel Loadable Module Entry Points */
-
-/*
- * Module 'insert' entry point.
- * o print announcement
- * o allocate adapter data space
- * o initialize static data
- * o register all cards with WAN router
- * o calibrate Cyclom 2X shared memory access delay.
- *
- * Return: 0 Ok
- * < 0 error.
- * Context: process
- */
-static int __init cycx_init(void)
-{
- int cnt, err = -ENOMEM;
-
- pr_info("%s v%u.%u %s\n",
- cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE,
- cycx_copyright);
-
- /* Verify number of cards and allocate adapter data space */
- cycx_ncards = min_t(int, cycx_ncards, CYCX_MAX_CARDS);
- cycx_ncards = max_t(int, cycx_ncards, 1);
- cycx_card_array = kcalloc(cycx_ncards, sizeof(struct cycx_device), GFP_KERNEL);
- if (!cycx_card_array)
- goto out;
-
-
- /* Register adapters with WAN router */
- for (cnt = 0; cnt < cycx_ncards; ++cnt) {
- struct cycx_device *card = &cycx_card_array[cnt];
- struct wan_device *wandev = &card->wandev;
-
- sprintf(card->devname, "%s%d", cycx_drvname, cnt + 1);
- wandev->magic = ROUTER_MAGIC;
- wandev->name = card->devname;
- wandev->private = card;
- wandev->setup = cycx_wan_setup;
- wandev->shutdown = cycx_wan_shutdown;
- err = register_wan_device(wandev);
-
- if (err) {
- pr_err("%s registration failed with error %d!\n",
- card->devname, err);
- break;
- }
- }
-
- err = -ENODEV;
- if (!cnt) {
- kfree(cycx_card_array);
- goto out;
- }
- err = 0;
- cycx_ncards = cnt; /* adjust actual number of cards */
-out: return err;
-}
-
-/*
- * Module 'remove' entry point.
- * o unregister all adapters from the WAN router
- * o release all remaining system resources
- */
-static void __exit cycx_exit(void)
-{
- int i = 0;
-
- for (; i < cycx_ncards; ++i) {
- struct cycx_device *card = &cycx_card_array[i];
- unregister_wan_device(card->devname);
- }
-
- kfree(cycx_card_array);
-}
-
-/* WAN Device Driver Entry Points */
-/*
- * Setup/configure WAN link driver.
- * o check adapter state
- * o make sure firmware is present in configuration
- * o allocate interrupt vector
- * o setup Cyclom 2X hardware
- * o call appropriate routine to perform protocol-specific initialization
- *
- * This function is called when router handles ROUTER_SETUP IOCTL. The
- * configuration structure is in kernel memory (including extended data, if
- * any).
- */
-static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf)
-{
- int rc = -EFAULT;
- struct cycx_device *card;
- int irq;
-
- /* Sanity checks */
-
- if (!wandev || !wandev->private || !conf)
- goto out;
-
- card = wandev->private;
- rc = -EBUSY;
- if (wandev->state != WAN_UNCONFIGURED)
- goto out;
-
- rc = -EINVAL;
- if (!conf->data_size || !conf->data) {
- pr_err("%s: firmware not found in configuration data!\n",
- wandev->name);
- goto out;
- }
-
- if (conf->irq <= 0) {
- pr_err("%s: can't configure without IRQ!\n", wandev->name);
- goto out;
- }
-
- /* Allocate IRQ */
- irq = conf->irq == 2 ? 9 : conf->irq; /* IRQ2 -> IRQ9 */
-
- if (request_irq(irq, cycx_isr, 0, wandev->name, card)) {
- pr_err("%s: can't reserve IRQ %d!\n", wandev->name, irq);
- goto out;
- }
-
- /* Configure hardware, load firmware, etc. */
- memset(&card->hw, 0, sizeof(card->hw));
- card->hw.irq = irq;
- card->hw.dpmsize = CYCX_WINDOWSIZE;
- card->hw.fwid = CFID_X25_2X;
- spin_lock_init(&card->lock);
- init_waitqueue_head(&card->wait_stats);
-
- rc = cycx_setup(&card->hw, conf->data, conf->data_size, conf->maddr);
- if (rc)
- goto out_irq;
-
- /* Initialize WAN device data space */
- wandev->irq = irq;
- wandev->dma = wandev->ioport = 0;
- wandev->maddr = (unsigned long)card->hw.dpmbase;
- wandev->msize = card->hw.dpmsize;
- wandev->hw_opt[2] = 0;
- wandev->hw_opt[3] = card->hw.fwid;
-
- /* Protocol-specific initialization */
- switch (card->hw.fwid) {
-#ifdef CONFIG_CYCLOMX_X25
- case CFID_X25_2X:
- rc = cycx_x25_wan_init(card, conf);
- break;
-#endif
- default:
- pr_err("%s: this firmware is not supported!\n", wandev->name);
- rc = -EINVAL;
- }
-
- if (rc) {
- cycx_down(&card->hw);
- goto out_irq;
- }
-
- rc = 0;
-out:
- return rc;
-out_irq:
- free_irq(irq, card);
- goto out;
-}
-
-/*
- * Shut down WAN link driver.
- * o shut down adapter hardware
- * o release system resources.
- *
- * This function is called by the router when device is being unregistered or
- * when it handles ROUTER_DOWN IOCTL.
- */
-static int cycx_wan_shutdown(struct wan_device *wandev)
-{
- int ret = -EFAULT;
- struct cycx_device *card;
-
- /* sanity checks */
- if (!wandev || !wandev->private)
- goto out;
-
- ret = 0;
- if (wandev->state == WAN_UNCONFIGURED)
- goto out;
-
- card = wandev->private;
- wandev->state = WAN_UNCONFIGURED;
- cycx_down(&card->hw);
- pr_info("%s: irq %d being freed!\n", wandev->name, wandev->irq);
- free_irq(wandev->irq, card);
-out: return ret;
-}
-
-/* Miscellaneous */
-/*
- * Cyclom 2X Interrupt Service Routine.
- * o acknowledge Cyclom 2X hardware interrupt.
- * o call protocol-specific interrupt service routine, if any.
- */
-static irqreturn_t cycx_isr(int irq, void *dev_id)
-{
- struct cycx_device *card = dev_id;
-
- if (card->wandev.state == WAN_UNCONFIGURED)
- goto out;
-
- if (card->in_isr) {
- pr_warn("%s: interrupt re-entrancy on IRQ %d!\n",
- card->devname, card->wandev.irq);
- goto out;
- }
-
- if (card->isr)
- card->isr(card);
- return IRQ_HANDLED;
-out:
- return IRQ_NONE;
-}
-
-/* Set WAN device state. */
-void cycx_set_state(struct cycx_device *card, int state)
-{
- unsigned long flags;
- char *string_state = NULL;
-
- spin_lock_irqsave(&card->lock, flags);
-
- if (card->wandev.state != state) {
- switch (state) {
- case WAN_CONNECTED:
- string_state = "connected!";
- break;
- case WAN_DISCONNECTED:
- string_state = "disconnected!";
- break;
- }
- pr_info("%s: link %s\n", card->devname, string_state);
- card->wandev.state = state;
- }
-
- card->state_tick = jiffies;
- spin_unlock_irqrestore(&card->lock, flags);
-}
-
-module_init(cycx_init);
-module_exit(cycx_exit);
diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c
deleted file mode 100644
index 06f3f6309e4b..000000000000
--- a/drivers/net/wan/cycx_x25.c
+++ /dev/null
@@ -1,1602 +0,0 @@
-/*
-* cycx_x25.c Cyclom 2X WAN Link Driver. X.25 module.
-*
-* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdla_x25.c by Gene Kozin <genek@compuserve.com>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* 2001/01/12 acme use dev_kfree_skb_irq on interrupt context
-* 2000/04/02 acme dprintk, cycx_debug
-* fixed the bug introduced in get_dev_by_lcn and
-* get_dev_by_dte_addr by the anonymous hacker
-* that converted this driver to softnet
-* 2000/01/08 acme cleanup
-* 1999/10/27 acme use ARPHRD_HWX25 so that the X.25 stack know
-* that we have a X.25 stack implemented in
-* firmware onboard
-* 1999/10/18 acme support for X.25 sockets in if_send,
-* beware: socket(AF_X25...) IS WORK IN PROGRESS,
-* TCP/IP over X.25 via wanrouter not affected,
-* working.
-* 1999/10/09 acme chan_disc renamed to chan_disconnect,
-* began adding support for X.25 sockets:
-* conf->protocol in new_if
-* 1999/10/05 acme fixed return E... to return -E...
-* 1999/08/10 acme serialized access to the card thru a spinlock
-* in x25_exec
-* 1999/08/09 acme removed per channel spinlocks
-* removed references to enable_tx_int
-* 1999/05/28 acme fixed nibble_to_byte, ackvc now properly treated
-* if_send simplified
-* 1999/05/25 acme fixed t1, t2, t21 & t23 configuration
-* use spinlocks instead of cli/sti in some points
-* 1999/05/24 acme finished the x25_get_stat function
-* 1999/05/23 acme dev->type = ARPHRD_X25 (tcpdump only works,
-* AFAIT, with ARPHRD_ETHER). This seems to be
-* needed to use socket(AF_X25)...
-* Now the config file must specify a peer media
-* address for svc channels over a crossover cable.
-* Removed hold_timeout from x25_channel_t,
-* not used.
-* A little enhancement in the DEBUG processing
-* 1999/05/22 acme go to DISCONNECTED in disconnect_confirm_intr,
-* instead of chan_disc.
-* 1999/05/16 marcelo fixed timer initialization in SVCs
-* 1999/01/05 acme x25_configure now get (most of) all
-* parameters...
-* 1999/01/05 acme pktlen now (correctly) uses log2 (value
-* configured)
-* 1999/01/03 acme judicious use of data types (u8, u16, u32, etc)
-* 1999/01/03 acme cyx_isr: reset dpmbase to acknowledge
-* indication (interrupt from cyclom 2x)
-* 1999/01/02 acme cyx_isr: first hackings...
-* 1999/01/0203 acme when initializing an array don't give less
-* elements than declared...
-* example: char send_cmd[6] = "?\xFF\x10";
-* you'll gonna lose a couple hours, 'cause your
-* brain won't admit that there's an error in the
-* above declaration... the side effect is that
-* memset is put into the unresolved symbols
-* instead of using the inline memset functions...
-* 1999/01/02 acme began chan_connect, chan_send, x25_send
-* 1998/12/31 acme x25_configure
-* this code can be compiled as non module
-* 1998/12/27 acme code cleanup
-* IPX code wiped out! let's decrease code
-* complexity for now, remember: I'm learning! :)
-* bps_to_speed_code OK
-* 1998/12/26 acme Minimal debug code cleanup
-* 1998/08/08 acme Initial version.
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#define CYCLOMX_X25_DEBUG 1
-
-#include <linux/ctype.h> /* isdigit() */
-#include <linux/errno.h> /* return codes */
-#include <linux/if_arp.h> /* ARPHRD_HWX25 */
-#include <linux/kernel.h> /* printk(), and other useful stuff */
-#include <linux/module.h>
-#include <linux/string.h> /* inline memset(), etc. */
-#include <linux/sched.h>
-#include <linux/slab.h> /* kmalloc(), kfree() */
-#include <linux/stddef.h> /* offsetof(), etc. */
-#include <linux/wanrouter.h> /* WAN router definitions */
-
-#include <asm/byteorder.h> /* htons(), etc. */
-
-#include <linux/cyclomx.h> /* Cyclom 2X common user API definitions */
-#include <linux/cycx_x25.h> /* X.25 firmware API definitions */
-
-#include <net/x25device.h>
-
-/* Defines & Macros */
-#define CYCX_X25_MAX_CMD_RETRY 5
-#define CYCX_X25_CHAN_MTU 2048 /* unfragmented logical channel MTU */
-
-/* Data Structures */
-/* This is an extension of the 'struct net_device' we create for each network
- interface to keep the rest of X.25 channel-specific data. */
-struct cycx_x25_channel {
- /* This member must be first. */
- struct net_device *slave; /* WAN slave */
-
- char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */
- char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */
- char *local_addr; /* local media address, ASCIIZ -
- svc thru crossover cable */
- s16 lcn; /* logical channel number/conn.req.key*/
- u8 link;
- struct timer_list timer; /* timer used for svc channel disc. */
- u16 protocol; /* ethertype, 0 - multiplexed */
- u8 svc; /* 0 - permanent, 1 - switched */
- u8 state; /* channel state */
- u8 drop_sequence; /* mark sequence for dropping */
- u32 idle_tmout; /* sec, before disconnecting */
- struct sk_buff *rx_skb; /* receive socket buffer */
- struct cycx_device *card; /* -> owner */
- struct net_device_stats ifstats;/* interface statistics */
-};
-
-/* Function Prototypes */
-/* WAN link driver entry points. These are called by the WAN router module. */
-static int cycx_wan_update(struct wan_device *wandev),
- cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev,
- wanif_conf_t *conf),
- cycx_wan_del_if(struct wan_device *wandev, struct net_device *dev);
-
-/* Network device interface */
-static int cycx_netdevice_init(struct net_device *dev);
-static int cycx_netdevice_open(struct net_device *dev);
-static int cycx_netdevice_stop(struct net_device *dev);
-static int cycx_netdevice_hard_header(struct sk_buff *skb,
- struct net_device *dev, u16 type,
- const void *daddr, const void *saddr,
- unsigned len);
-static int cycx_netdevice_rebuild_header(struct sk_buff *skb);
-static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
-
-static struct net_device_stats *
- cycx_netdevice_get_stats(struct net_device *dev);
-
-/* Interrupt handlers */
-static void cycx_x25_irq_handler(struct cycx_device *card),
- cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd),
- cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd),
- cycx_x25_irq_log(struct cycx_device *card,
- struct cycx_x25_cmd *cmd),
- cycx_x25_irq_stat(struct cycx_device *card,
- struct cycx_x25_cmd *cmd),
- cycx_x25_irq_connect_confirm(struct cycx_device *card,
- struct cycx_x25_cmd *cmd),
- cycx_x25_irq_disconnect_confirm(struct cycx_device *card,
- struct cycx_x25_cmd *cmd),
- cycx_x25_irq_connect(struct cycx_device *card,
- struct cycx_x25_cmd *cmd),
- cycx_x25_irq_disconnect(struct cycx_device *card,
- struct cycx_x25_cmd *cmd),
- cycx_x25_irq_spurious(struct cycx_device *card,
- struct cycx_x25_cmd *cmd);
-
-/* X.25 firmware interface functions */
-static int cycx_x25_configure(struct cycx_device *card,
- struct cycx_x25_config *conf),
- cycx_x25_get_stats(struct cycx_device *card),
- cycx_x25_send(struct cycx_device *card, u8 link, u8 lcn, u8 bitm,
- int len, void *buf),
- cycx_x25_connect_response(struct cycx_device *card,
- struct cycx_x25_channel *chan),
- cycx_x25_disconnect_response(struct cycx_device *card, u8 link,
- u8 lcn);
-
-/* channel functions */
-static int cycx_x25_chan_connect(struct net_device *dev),
- cycx_x25_chan_send(struct net_device *dev, struct sk_buff *skb);
-
-static void cycx_x25_chan_disconnect(struct net_device *dev),
- cycx_x25_chan_send_event(struct net_device *dev, u8 event);
-
-/* Miscellaneous functions */
-static void cycx_x25_set_chan_state(struct net_device *dev, u8 state),
- cycx_x25_chan_timer(unsigned long d);
-
-static void nibble_to_byte(u8 *s, u8 *d, u8 len, u8 nibble),
- reset_timer(struct net_device *dev);
-
-static u8 bps_to_speed_code(u32 bps);
-static u8 cycx_log2(u32 n);
-
-static unsigned dec_to_uint(u8 *str, int len);
-
-static struct net_device *cycx_x25_get_dev_by_lcn(struct wan_device *wandev,
- s16 lcn);
-static struct net_device *
- cycx_x25_get_dev_by_dte_addr(struct wan_device *wandev, char *dte);
-
-static void cycx_x25_chan_setup(struct net_device *dev);
-
-#ifdef CYCLOMX_X25_DEBUG
-static void hex_dump(char *msg, unsigned char *p, int len);
-static void cycx_x25_dump_config(struct cycx_x25_config *conf);
-static void cycx_x25_dump_stats(struct cycx_x25_stats *stats);
-static void cycx_x25_dump_devs(struct wan_device *wandev);
-#else
-#define hex_dump(msg, p, len)
-#define cycx_x25_dump_config(conf)
-#define cycx_x25_dump_stats(stats)
-#define cycx_x25_dump_devs(wandev)
-#endif
-/* Public Functions */
-
-/* X.25 Protocol Initialization routine.
- *
- * This routine is called by the main Cyclom 2X module during setup. At this
- * point adapter is completely initialized and X.25 firmware is running.
- * o configure adapter
- * o initialize protocol-specific fields of the adapter data space.
- *
- * Return: 0 o.k.
- * < 0 failure. */
-int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf)
-{
- struct cycx_x25_config cfg;
-
- /* Verify configuration ID */
- if (conf->config_id != WANCONFIG_X25) {
- pr_info("%s: invalid configuration ID %u!\n",
- card->devname, conf->config_id);
- return -EINVAL;
- }
-
- /* Initialize protocol-specific fields */
- card->mbox = card->hw.dpmbase + X25_MBOX_OFFS;
- card->u.x.connection_keys = 0;
- spin_lock_init(&card->u.x.lock);
-
- /* Configure adapter. Here we set reasonable defaults, then parse
- * device configuration structure and set configuration options.
- * Most configuration options are verified and corrected (if
- * necessary) since we can't rely on the adapter to do so and don't
- * want it to fail either. */
- memset(&cfg, 0, sizeof(cfg));
- cfg.link = 0;
- cfg.clock = conf->clocking == WANOPT_EXTERNAL ? 8 : 55;
- cfg.speed = bps_to_speed_code(conf->bps);
- cfg.n3win = 7;
- cfg.n2win = 2;
- cfg.n2 = 5;
- cfg.nvc = 1;
- cfg.npvc = 1;
- cfg.flags = 0x02; /* default = V35 */
- cfg.t1 = 10; /* line carrier timeout */
- cfg.t2 = 29; /* tx timeout */
- cfg.t21 = 180; /* CALL timeout */
- cfg.t23 = 180; /* CLEAR timeout */
-
- /* adjust MTU */
- if (!conf->mtu || conf->mtu >= 512)
- card->wandev.mtu = 512;
- else if (conf->mtu >= 256)
- card->wandev.mtu = 256;
- else if (conf->mtu >= 128)
- card->wandev.mtu = 128;
- else
- card->wandev.mtu = 64;
-
- cfg.pktlen = cycx_log2(card->wandev.mtu);
-
- if (conf->station == WANOPT_DTE) {
- cfg.locaddr = 3; /* DTE */
- cfg.remaddr = 1; /* DCE */
- } else {
- cfg.locaddr = 1; /* DCE */
- cfg.remaddr = 3; /* DTE */
- }
-
- if (conf->interface == WANOPT_RS232)
- cfg.flags = 0; /* FIXME just reset the 2nd bit */
-
- if (conf->u.x25.hi_pvc) {
- card->u.x.hi_pvc = min_t(unsigned int, conf->u.x25.hi_pvc, 4095);
- card->u.x.lo_pvc = min_t(unsigned int, conf->u.x25.lo_pvc, card->u.x.hi_pvc);
- }
-
- if (conf->u.x25.hi_svc) {
- card->u.x.hi_svc = min_t(unsigned int, conf->u.x25.hi_svc, 4095);
- card->u.x.lo_svc = min_t(unsigned int, conf->u.x25.lo_svc, card->u.x.hi_svc);
- }
-
- if (card->u.x.lo_pvc == 255)
- cfg.npvc = 0;
- else
- cfg.npvc = card->u.x.hi_pvc - card->u.x.lo_pvc + 1;
-
- cfg.nvc = card->u.x.hi_svc - card->u.x.lo_svc + 1 + cfg.npvc;
-
- if (conf->u.x25.hdlc_window)
- cfg.n2win = min_t(unsigned int, conf->u.x25.hdlc_window, 7);
-
- if (conf->u.x25.pkt_window)
- cfg.n3win = min_t(unsigned int, conf->u.x25.pkt_window, 7);
-
- if (conf->u.x25.t1)
- cfg.t1 = min_t(unsigned int, conf->u.x25.t1, 30);
-
- if (conf->u.x25.t2)
- cfg.t2 = min_t(unsigned int, conf->u.x25.t2, 30);
-
- if (conf->u.x25.t11_t21)
- cfg.t21 = min_t(unsigned int, conf->u.x25.t11_t21, 30);
-
- if (conf->u.x25.t13_t23)
- cfg.t23 = min_t(unsigned int, conf->u.x25.t13_t23, 30);
-
- if (conf->u.x25.n2)
- cfg.n2 = min_t(unsigned int, conf->u.x25.n2, 30);
-
- /* initialize adapter */
- if (cycx_x25_configure(card, &cfg))
- return -EIO;
-
- /* Initialize protocol-specific fields of adapter data space */
- card->wandev.bps = conf->bps;
- card->wandev.interface = conf->interface;
- card->wandev.clocking = conf->clocking;
- card->wandev.station = conf->station;
- card->isr = cycx_x25_irq_handler;
- card->exec = NULL;
- card->wandev.update = cycx_wan_update;
- card->wandev.new_if = cycx_wan_new_if;
- card->wandev.del_if = cycx_wan_del_if;
- card->wandev.state = WAN_DISCONNECTED;
-
- return 0;
-}
-
-/* WAN Device Driver Entry Points */
-/* Update device status & statistics. */
-static int cycx_wan_update(struct wan_device *wandev)
-{
- /* sanity checks */
- if (!wandev || !wandev->private)
- return -EFAULT;
-
- if (wandev->state == WAN_UNCONFIGURED)
- return -ENODEV;
-
- cycx_x25_get_stats(wandev->private);
-
- return 0;
-}
-
-/* Create new logical channel.
- * This routine is called by the router when ROUTER_IFNEW IOCTL is being
- * handled.
- * o parse media- and hardware-specific configuration
- * o make sure that a new channel can be created
- * o allocate resources, if necessary
- * o prepare network device structure for registration.
- *
- * Return: 0 o.k.
- * < 0 failure (channel will not be created) */
-static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev,
- wanif_conf_t *conf)
-{
- struct cycx_device *card = wandev->private;
- struct cycx_x25_channel *chan;
- int err = 0;
-
- if (!conf->name[0] || strlen(conf->name) > WAN_IFNAME_SZ) {
- pr_info("%s: invalid interface name!\n", card->devname);
- return -EINVAL;
- }
-
- dev = alloc_netdev(sizeof(struct cycx_x25_channel), conf->name,
- cycx_x25_chan_setup);
- if (!dev)
- return -ENOMEM;
-
- chan = netdev_priv(dev);
- strcpy(chan->name, conf->name);
- chan->card = card;
- chan->link = conf->port;
- chan->protocol = conf->protocol ? ETH_P_X25 : ETH_P_IP;
- chan->rx_skb = NULL;
- /* only used in svc connected thru crossover cable */
- chan->local_addr = NULL;
-
- if (conf->addr[0] == '@') { /* SVC */
- int len = strlen(conf->local_addr);
-
- if (len) {
- if (len > WAN_ADDRESS_SZ) {
- pr_err("%s: %s local addr too long!\n",
- wandev->name, chan->name);
- err = -EINVAL;
- goto error;
- } else {
- chan->local_addr = kmalloc(len + 1, GFP_KERNEL);
-
- if (!chan->local_addr) {
- err = -ENOMEM;
- goto error;
- }
- }
-
- strncpy(chan->local_addr, conf->local_addr,
- WAN_ADDRESS_SZ);
- }
-
- chan->svc = 1;
- strncpy(chan->addr, &conf->addr[1], WAN_ADDRESS_SZ);
- init_timer(&chan->timer);
- chan->timer.function = cycx_x25_chan_timer;
- chan->timer.data = (unsigned long)dev;
-
- /* Set channel timeouts (default if not specified) */
- chan->idle_tmout = conf->idle_timeout ? conf->idle_timeout : 90;
- } else if (isdigit(conf->addr[0])) { /* PVC */
- s16 lcn = dec_to_uint(conf->addr, 0);
-
- if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc)
- chan->lcn = lcn;
- else {
- pr_err("%s: PVC %u is out of range on interface %s!\n",
- wandev->name, lcn, chan->name);
- err = -EINVAL;
- goto error;
- }
- } else {
- pr_err("%s: invalid media address on interface %s!\n",
- wandev->name, chan->name);
- err = -EINVAL;
- goto error;
- }
-
- return 0;
-
-error:
- free_netdev(dev);
- return err;
-}
-
-/* Delete logical channel. */
-static int cycx_wan_del_if(struct wan_device *wandev, struct net_device *dev)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
-
- if (chan->svc) {
- kfree(chan->local_addr);
- if (chan->state == WAN_CONNECTED)
- del_timer(&chan->timer);
- }
-
- return 0;
-}
-
-
-/* Network Device Interface */
-
-static const struct header_ops cycx_header_ops = {
- .create = cycx_netdevice_hard_header,
- .rebuild = cycx_netdevice_rebuild_header,
-};
-
-static const struct net_device_ops cycx_netdev_ops = {
- .ndo_init = cycx_netdevice_init,
- .ndo_open = cycx_netdevice_open,
- .ndo_stop = cycx_netdevice_stop,
- .ndo_start_xmit = cycx_netdevice_hard_start_xmit,
- .ndo_get_stats = cycx_netdevice_get_stats,
-};
-
-static void cycx_x25_chan_setup(struct net_device *dev)
-{
- /* Initialize device driver entry points */
- dev->netdev_ops = &cycx_netdev_ops;
- dev->header_ops = &cycx_header_ops;
-
- /* Initialize media-specific parameters */
- dev->mtu = CYCX_X25_CHAN_MTU;
- dev->type = ARPHRD_HWX25; /* ARP h/w type */
- dev->hard_header_len = 0; /* media header length */
- dev->addr_len = 0; /* hardware address length */
-}
-
-/* Initialize Linux network interface.
- *
- * This routine is called only once for each interface, during Linux network
- * interface registration. Returning anything but zero will fail interface
- * registration. */
-static int cycx_netdevice_init(struct net_device *dev)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
- struct cycx_device *card = chan->card;
- struct wan_device *wandev = &card->wandev;
-
- if (!chan->svc)
- *(__be16*)dev->dev_addr = htons(chan->lcn);
-
- /* Initialize hardware parameters (just for reference) */
- dev->irq = wandev->irq;
- dev->dma = wandev->dma;
- dev->base_addr = wandev->ioport;
- dev->mem_start = (unsigned long)wandev->maddr;
- dev->mem_end = (unsigned long)(wandev->maddr +
- wandev->msize - 1);
- dev->flags |= IFF_NOARP;
-
- /* Set transmit buffer queue length */
- dev->tx_queue_len = 10;
-
- /* Initialize socket buffers */
- cycx_x25_set_chan_state(dev, WAN_DISCONNECTED);
-
- return 0;
-}
-
-/* Open network interface.
- * o prevent module from unloading by incrementing use count
- * o if link is disconnected then initiate connection
- *
- * Return 0 if O.k. or errno. */
-static int cycx_netdevice_open(struct net_device *dev)
-{
- if (netif_running(dev))
- return -EBUSY; /* only one open is allowed */
-
- netif_start_queue(dev);
- return 0;
-}
-
-/* Close network interface.
- * o reset flags.
- * o if there's no more open channels then disconnect physical link. */
-static int cycx_netdevice_stop(struct net_device *dev)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
-
- netif_stop_queue(dev);
-
- if (chan->state == WAN_CONNECTED || chan->state == WAN_CONNECTING)
- cycx_x25_chan_disconnect(dev);
-
- return 0;
-}
-
-/* Build media header.
- * o encapsulate packet according to encapsulation type.
- *
- * The trick here is to put packet type (Ethertype) into 'protocol' field of
- * the socket buffer, so that we don't forget it. If encapsulation fails,
- * set skb->protocol to 0 and discard packet later.
- *
- * Return: media header length. */
-static int cycx_netdevice_hard_header(struct sk_buff *skb,
- struct net_device *dev, u16 type,
- const void *daddr, const void *saddr,
- unsigned len)
-{
- skb->protocol = htons(type);
-
- return dev->hard_header_len;
-}
-
-/* * Re-build media header.
- * Return: 1 physical address resolved.
- * 0 physical address not resolved */
-static int cycx_netdevice_rebuild_header(struct sk_buff *skb)
-{
- return 1;
-}
-
-/* Send a packet on a network interface.
- * o set busy flag (marks start of the transmission).
- * o check link state. If link is not up, then drop the packet.
- * o check channel status. If it's down then initiate a call.
- * o pass a packet to corresponding WAN device.
- * o free socket buffer
- *
- * Return: 0 complete (socket buffer must be freed)
- * non-0 packet may be re-transmitted (tbusy must be set)
- *
- * Notes:
- * 1. This routine is called either by the protocol stack or by the "net
- * bottom half" (with interrupts enabled).
- * 2. Setting tbusy flag will inhibit further transmit requests from the
- * protocol stack and can be used for flow control with protocol layer. */
-static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
- struct cycx_device *card = chan->card;
-
- if (!chan->svc)
- chan->protocol = ntohs(skb->protocol);
-
- if (card->wandev.state != WAN_CONNECTED)
- ++chan->ifstats.tx_dropped;
- else if (chan->svc && chan->protocol &&
- chan->protocol != ntohs(skb->protocol)) {
- pr_info("%s: unsupported Ethertype 0x%04X on interface %s!\n",
- card->devname, ntohs(skb->protocol), dev->name);
- ++chan->ifstats.tx_errors;
- } else if (chan->protocol == ETH_P_IP) {
- switch (chan->state) {
- case WAN_DISCONNECTED:
- if (cycx_x25_chan_connect(dev)) {
- netif_stop_queue(dev);
- return NETDEV_TX_BUSY;
- }
- /* fall thru */
- case WAN_CONNECTED:
- reset_timer(dev);
- dev->trans_start = jiffies;
- netif_stop_queue(dev);
-
- if (cycx_x25_chan_send(dev, skb))
- return NETDEV_TX_BUSY;
-
- break;
- default:
- ++chan->ifstats.tx_dropped;
- ++card->wandev.stats.tx_dropped;
- }
- } else { /* chan->protocol == ETH_P_X25 */
- switch (skb->data[0]) {
- case X25_IFACE_DATA:
- break;
- case X25_IFACE_CONNECT:
- cycx_x25_chan_connect(dev);
- goto free_packet;
- case X25_IFACE_DISCONNECT:
- cycx_x25_chan_disconnect(dev);
- goto free_packet;
- default:
- pr_info("%s: unknown %d x25-iface request on %s!\n",
- card->devname, skb->data[0], dev->name);
- ++chan->ifstats.tx_errors;
- goto free_packet;
- }
-
- skb_pull(skb, 1); /* Remove control byte */
- reset_timer(dev);
- dev->trans_start = jiffies;
- netif_stop_queue(dev);
-
- if (cycx_x25_chan_send(dev, skb)) {
- /* prepare for future retransmissions */
- skb_push(skb, 1);
- return NETDEV_TX_BUSY;
- }
- }
-
-free_packet:
- dev_kfree_skb(skb);
-
- return NETDEV_TX_OK;
-}
-
-/* Get Ethernet-style interface statistics.
- * Return a pointer to struct net_device_stats */
-static struct net_device_stats *cycx_netdevice_get_stats(struct net_device *dev)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
-
- return chan ? &chan->ifstats : NULL;
-}
-
-/* Interrupt Handlers */
-/* X.25 Interrupt Service Routine. */
-static void cycx_x25_irq_handler(struct cycx_device *card)
-{
- struct cycx_x25_cmd cmd;
- u16 z = 0;
-
- card->in_isr = 1;
- card->buff_int_mode_unbusy = 0;
- cycx_peek(&card->hw, X25_RXMBOX_OFFS, &cmd, sizeof(cmd));
-
- switch (cmd.command) {
- case X25_DATA_INDICATION:
- cycx_x25_irq_rx(card, &cmd);
- break;
- case X25_ACK_FROM_VC:
- cycx_x25_irq_tx(card, &cmd);
- break;
- case X25_LOG:
- cycx_x25_irq_log(card, &cmd);
- break;
- case X25_STATISTIC:
- cycx_x25_irq_stat(card, &cmd);
- break;
- case X25_CONNECT_CONFIRM:
- cycx_x25_irq_connect_confirm(card, &cmd);
- break;
- case X25_CONNECT_INDICATION:
- cycx_x25_irq_connect(card, &cmd);
- break;
- case X25_DISCONNECT_INDICATION:
- cycx_x25_irq_disconnect(card, &cmd);
- break;
- case X25_DISCONNECT_CONFIRM:
- cycx_x25_irq_disconnect_confirm(card, &cmd);
- break;
- case X25_LINE_ON:
- cycx_set_state(card, WAN_CONNECTED);
- break;
- case X25_LINE_OFF:
- cycx_set_state(card, WAN_DISCONNECTED);
- break;
- default:
- cycx_x25_irq_spurious(card, &cmd);
- break;
- }
-
- cycx_poke(&card->hw, 0, &z, sizeof(z));
- cycx_poke(&card->hw, X25_RXMBOX_OFFS, &z, sizeof(z));
- card->in_isr = 0;
-}
-
-/* Transmit interrupt handler.
- * o Release socket buffer
- * o Clear 'tbusy' flag */
-static void cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd)
-{
- struct net_device *dev;
- struct wan_device *wandev = &card->wandev;
- u8 lcn;
-
- cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn));
-
- /* unbusy device and then dev_tint(); */
- dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
- if (dev) {
- card->buff_int_mode_unbusy = 1;
- netif_wake_queue(dev);
- } else
- pr_err("%s:ackvc for inexistent lcn %d\n", card->devname, lcn);
-}
-
-/* Receive interrupt handler.
- * This routine handles fragmented IP packets using M-bit according to the
- * RFC1356.
- * o map logical channel number to network interface.
- * o allocate socket buffer or append received packet to the existing one.
- * o if M-bit is reset (i.e. it's the last packet in a sequence) then
- * decapsulate packet and pass socket buffer to the protocol stack.
- *
- * Notes:
- * 1. When allocating a socket buffer, if M-bit is set then more data is
- * coming and we have to allocate buffer for the maximum IP packet size
- * expected on this channel.
- * 2. If something goes wrong and X.25 packet has to be dropped (e.g. no
- * socket buffers available) the whole packet sequence must be discarded. */
-static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd)
-{
- struct wan_device *wandev = &card->wandev;
- struct net_device *dev;
- struct cycx_x25_channel *chan;
- struct sk_buff *skb;
- u8 bitm, lcn;
- int pktlen = cmd->len - 5;
-
- cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn));
- cycx_peek(&card->hw, cmd->buf + 4, &bitm, sizeof(bitm));
- bitm &= 0x10;
-
- dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
- if (!dev) {
- /* Invalid channel, discard packet */
- pr_info("%s: receiving on orphaned LCN %d!\n",
- card->devname, lcn);
- return;
- }
-
- chan = netdev_priv(dev);
- reset_timer(dev);
-
- if (chan->drop_sequence) {
- if (!bitm)
- chan->drop_sequence = 0;
- else
- return;
- }
-
- if ((skb = chan->rx_skb) == NULL) {
- /* Allocate new socket buffer */
- int bufsize = bitm ? dev->mtu : pktlen;
-
- if ((skb = dev_alloc_skb((chan->protocol == ETH_P_X25 ? 1 : 0) +
- bufsize +
- dev->hard_header_len)) == NULL) {
- pr_info("%s: no socket buffers available!\n",
- card->devname);
- chan->drop_sequence = 1;
- ++chan->ifstats.rx_dropped;
- return;
- }
-
- if (chan->protocol == ETH_P_X25) /* X.25 socket layer control */
- /* 0 = data packet (dev_alloc_skb zeroed skb->data) */
- skb_put(skb, 1);
-
- skb->dev = dev;
- skb->protocol = htons(chan->protocol);
- chan->rx_skb = skb;
- }
-
- if (skb_tailroom(skb) < pktlen) {
- /* No room for the packet. Call off the whole thing! */
- dev_kfree_skb_irq(skb);
- chan->rx_skb = NULL;
-
- if (bitm)
- chan->drop_sequence = 1;
-
- pr_info("%s: unexpectedly long packet sequence on interface %s!\n",
- card->devname, dev->name);
- ++chan->ifstats.rx_length_errors;
- return;
- }
-
- /* Append packet to the socket buffer */
- cycx_peek(&card->hw, cmd->buf + 5, skb_put(skb, pktlen), pktlen);
-
- if (bitm)
- return; /* more data is coming */
-
- chan->rx_skb = NULL; /* dequeue packet */
-
- ++chan->ifstats.rx_packets;
- chan->ifstats.rx_bytes += pktlen;
-
- skb_reset_mac_header(skb);
- netif_rx(skb);
-}
-
-/* Connect interrupt handler. */
-static void cycx_x25_irq_connect(struct cycx_device *card,
- struct cycx_x25_cmd *cmd)
-{
- struct wan_device *wandev = &card->wandev;
- struct net_device *dev = NULL;
- struct cycx_x25_channel *chan;
- u8 d[32],
- loc[24],
- rem[24];
- u8 lcn, sizeloc, sizerem;
-
- cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn));
- cycx_peek(&card->hw, cmd->buf + 5, &sizeloc, sizeof(sizeloc));
- cycx_peek(&card->hw, cmd->buf + 6, d, cmd->len - 6);
-
- sizerem = sizeloc >> 4;
- sizeloc &= 0x0F;
-
- loc[0] = rem[0] = '\0';
-
- if (sizeloc)
- nibble_to_byte(d, loc, sizeloc, 0);
-
- if (sizerem)
- nibble_to_byte(d + (sizeloc >> 1), rem, sizerem, sizeloc & 1);
-
- dprintk(1, KERN_INFO "%s:lcn=%d, local=%s, remote=%s\n",
- __func__, lcn, loc, rem);
-
- dev = cycx_x25_get_dev_by_dte_addr(wandev, rem);
- if (!dev) {
- /* Invalid channel, discard packet */
- pr_info("%s: connect not expected: remote %s!\n",
- card->devname, rem);
- return;
- }
-
- chan = netdev_priv(dev);
- chan->lcn = lcn;
- cycx_x25_connect_response(card, chan);
- cycx_x25_set_chan_state(dev, WAN_CONNECTED);
-}
-
-/* Connect confirm interrupt handler. */
-static void cycx_x25_irq_connect_confirm(struct cycx_device *card,
- struct cycx_x25_cmd *cmd)
-{
- struct wan_device *wandev = &card->wandev;
- struct net_device *dev;
- struct cycx_x25_channel *chan;
- u8 lcn, key;
-
- cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn));
- cycx_peek(&card->hw, cmd->buf + 1, &key, sizeof(key));
- dprintk(1, KERN_INFO "%s: %s:lcn=%d, key=%d\n",
- card->devname, __func__, lcn, key);
-
- dev = cycx_x25_get_dev_by_lcn(wandev, -key);
- if (!dev) {
- /* Invalid channel, discard packet */
- clear_bit(--key, (void*)&card->u.x.connection_keys);
- pr_info("%s: connect confirm not expected: lcn %d, key=%d!\n",
- card->devname, lcn, key);
- return;
- }
-
- clear_bit(--key, (void*)&card->u.x.connection_keys);
- chan = netdev_priv(dev);
- chan->lcn = lcn;
- cycx_x25_set_chan_state(dev, WAN_CONNECTED);
-}
-
-/* Disconnect confirm interrupt handler. */
-static void cycx_x25_irq_disconnect_confirm(struct cycx_device *card,
- struct cycx_x25_cmd *cmd)
-{
- struct wan_device *wandev = &card->wandev;
- struct net_device *dev;
- u8 lcn;
-
- cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn));
- dprintk(1, KERN_INFO "%s: %s:lcn=%d\n",
- card->devname, __func__, lcn);
- dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
- if (!dev) {
- /* Invalid channel, discard packet */
- pr_info("%s:disconnect confirm not expected!:lcn %d\n",
- card->devname, lcn);
- return;
- }
-
- cycx_x25_set_chan_state(dev, WAN_DISCONNECTED);
-}
-
-/* disconnect interrupt handler. */
-static void cycx_x25_irq_disconnect(struct cycx_device *card,
- struct cycx_x25_cmd *cmd)
-{
- struct wan_device *wandev = &card->wandev;
- struct net_device *dev;
- u8 lcn;
-
- cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn));
- dprintk(1, KERN_INFO "%s:lcn=%d\n", __func__, lcn);
-
- dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
- if (dev) {
- struct cycx_x25_channel *chan = netdev_priv(dev);
-
- cycx_x25_disconnect_response(card, chan->link, lcn);
- cycx_x25_set_chan_state(dev, WAN_DISCONNECTED);
- } else
- cycx_x25_disconnect_response(card, 0, lcn);
-}
-
-/* LOG interrupt handler. */
-static void cycx_x25_irq_log(struct cycx_device *card, struct cycx_x25_cmd *cmd)
-{
-#if CYCLOMX_X25_DEBUG
- char bf[20];
- u16 size, toread, link, msg_code;
- u8 code, routine;
-
- cycx_peek(&card->hw, cmd->buf, &msg_code, sizeof(msg_code));
- cycx_peek(&card->hw, cmd->buf + 2, &link, sizeof(link));
- cycx_peek(&card->hw, cmd->buf + 4, &size, sizeof(size));
- /* at most 20 bytes are available... thanks to Daniela :) */
- toread = size < 20 ? size : 20;
- cycx_peek(&card->hw, cmd->buf + 10, &bf, toread);
- cycx_peek(&card->hw, cmd->buf + 10 + toread, &code, 1);
- cycx_peek(&card->hw, cmd->buf + 10 + toread + 1, &routine, 1);
-
- pr_info("cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n");
- pr_info("cmd->buf=0x%X\n", cmd->buf);
- pr_info("Log message code=0x%X\n", msg_code);
- pr_info("Link=%d\n", link);
- pr_info("log code=0x%X\n", code);
- pr_info("log routine=0x%X\n", routine);
- pr_info("Message size=%d\n", size);
- hex_dump("Message", bf, toread);
-#endif
-}
-
-/* STATISTIC interrupt handler. */
-static void cycx_x25_irq_stat(struct cycx_device *card,
- struct cycx_x25_cmd *cmd)
-{
- cycx_peek(&card->hw, cmd->buf, &card->u.x.stats,
- sizeof(card->u.x.stats));
- hex_dump("cycx_x25_irq_stat", (unsigned char*)&card->u.x.stats,
- sizeof(card->u.x.stats));
- cycx_x25_dump_stats(&card->u.x.stats);
- wake_up_interruptible(&card->wait_stats);
-}
-
-/* Spurious interrupt handler.
- * o print a warning
- * If number of spurious interrupts exceeded some limit, then ??? */
-static void cycx_x25_irq_spurious(struct cycx_device *card,
- struct cycx_x25_cmd *cmd)
-{
- pr_info("%s: spurious interrupt (0x%X)!\n",
- card->devname, cmd->command);
-}
-#ifdef CYCLOMX_X25_DEBUG
-static void hex_dump(char *msg, unsigned char *p, int len)
-{
- print_hex_dump(KERN_INFO, msg, DUMP_PREFIX_OFFSET, 16, 1,
- p, len, true);
-}
-#endif
-
-/* Cyclom 2X Firmware-Specific Functions */
-/* Exec X.25 command. */
-static int x25_exec(struct cycx_device *card, int command, int link,
- void *d1, int len1, void *d2, int len2)
-{
- struct cycx_x25_cmd c;
- unsigned long flags;
- u32 addr = 0x1200 + 0x2E0 * link + 0x1E2;
- u8 retry = CYCX_X25_MAX_CMD_RETRY;
- int err = 0;
-
- c.command = command;
- c.link = link;
- c.len = len1 + len2;
-
- spin_lock_irqsave(&card->u.x.lock, flags);
-
- /* write command */
- cycx_poke(&card->hw, X25_MBOX_OFFS, &c, sizeof(c) - sizeof(c.buf));
-
- /* write X.25 data */
- if (d1) {
- cycx_poke(&card->hw, addr, d1, len1);
-
- if (d2) {
- if (len2 > 254) {
- u32 addr1 = 0xA00 + 0x400 * link;
-
- cycx_poke(&card->hw, addr + len1, d2, 249);
- cycx_poke(&card->hw, addr1, ((u8*)d2) + 249,
- len2 - 249);
- } else
- cycx_poke(&card->hw, addr + len1, d2, len2);
- }
- }
-
- /* generate interruption, executing command */
- cycx_intr(&card->hw);
-
- /* wait till card->mbox == 0 */
- do {
- err = cycx_exec(card->mbox);
- } while (retry-- && err);
-
- spin_unlock_irqrestore(&card->u.x.lock, flags);
-
- return err;
-}
-
-/* Configure adapter. */
-static int cycx_x25_configure(struct cycx_device *card,
- struct cycx_x25_config *conf)
-{
- struct {
- u16 nlinks;
- struct cycx_x25_config conf[2];
- } x25_cmd_conf;
-
- memset(&x25_cmd_conf, 0, sizeof(x25_cmd_conf));
- x25_cmd_conf.nlinks = 2;
- x25_cmd_conf.conf[0] = *conf;
- /* FIXME: we need to find a way in the wanrouter framework
- to configure the second link, for now lets use it
- with the same config from the first link, fixing
- the interface type to RS232, the speed in 38400 and
- the clock to external */
- x25_cmd_conf.conf[1] = *conf;
- x25_cmd_conf.conf[1].link = 1;
- x25_cmd_conf.conf[1].speed = 5; /* 38400 */
- x25_cmd_conf.conf[1].clock = 8;
- x25_cmd_conf.conf[1].flags = 0; /* default = RS232 */
-
- cycx_x25_dump_config(&x25_cmd_conf.conf[0]);
- cycx_x25_dump_config(&x25_cmd_conf.conf[1]);
-
- return x25_exec(card, X25_CONFIG, 0,
- &x25_cmd_conf, sizeof(x25_cmd_conf), NULL, 0);
-}
-
-/* Get protocol statistics. */
-static int cycx_x25_get_stats(struct cycx_device *card)
-{
- /* the firmware expects 20 in the size field!!!
- thanks to Daniela */
- int err = x25_exec(card, X25_STATISTIC, 0, NULL, 20, NULL, 0);
-
- if (err)
- return err;
-
- interruptible_sleep_on(&card->wait_stats);
-
- if (signal_pending(current))
- return -EINTR;
-
- card->wandev.stats.rx_packets = card->u.x.stats.n2_rx_frames;
- card->wandev.stats.rx_over_errors = card->u.x.stats.rx_over_errors;
- card->wandev.stats.rx_crc_errors = card->u.x.stats.rx_crc_errors;
- card->wandev.stats.rx_length_errors = 0; /* not available from fw */
- card->wandev.stats.rx_frame_errors = 0; /* not available from fw */
- card->wandev.stats.rx_missed_errors = card->u.x.stats.rx_aborts;
- card->wandev.stats.rx_dropped = 0; /* not available from fw */
- card->wandev.stats.rx_errors = 0; /* not available from fw */
- card->wandev.stats.tx_packets = card->u.x.stats.n2_tx_frames;
- card->wandev.stats.tx_aborted_errors = card->u.x.stats.tx_aborts;
- card->wandev.stats.tx_dropped = 0; /* not available from fw */
- card->wandev.stats.collisions = 0; /* not available from fw */
- card->wandev.stats.tx_errors = 0; /* not available from fw */
-
- cycx_x25_dump_devs(&card->wandev);
-
- return 0;
-}
-
-/* return the number of nibbles */
-static int byte_to_nibble(u8 *s, u8 *d, char *nibble)
-{
- int i = 0;
-
- if (*nibble && *s) {
- d[i] |= *s++ - '0';
- *nibble = 0;
- ++i;
- }
-
- while (*s) {
- d[i] = (*s - '0') << 4;
- if (*(s + 1))
- d[i] |= *(s + 1) - '0';
- else {
- *nibble = 1;
- break;
- }
- ++i;
- s += 2;
- }
-
- return i;
-}
-
-static void nibble_to_byte(u8 *s, u8 *d, u8 len, u8 nibble)
-{
- if (nibble) {
- *d++ = '0' + (*s++ & 0x0F);
- --len;
- }
-
- while (len) {
- *d++ = '0' + (*s >> 4);
-
- if (--len) {
- *d++ = '0' + (*s & 0x0F);
- --len;
- } else break;
-
- ++s;
- }
-
- *d = '\0';
-}
-
-/* Place X.25 call. */
-static int x25_place_call(struct cycx_device *card,
- struct cycx_x25_channel *chan)
-{
- int err = 0,
- len;
- char d[64],
- nibble = 0,
- mylen = chan->local_addr ? strlen(chan->local_addr) : 0,
- remotelen = strlen(chan->addr);
- u8 key;
-
- if (card->u.x.connection_keys == ~0U) {
- pr_info("%s: too many simultaneous connection requests!\n",
- card->devname);
- return -EAGAIN;
- }
-
- key = ffz(card->u.x.connection_keys);
- set_bit(key, (void*)&card->u.x.connection_keys);
- ++key;
- dprintk(1, KERN_INFO "%s:x25_place_call:key=%d\n", card->devname, key);
- memset(d, 0, sizeof(d));
- d[1] = key; /* user key */
- d[2] = 0x10;
- d[4] = 0x0B;
-
- len = byte_to_nibble(chan->addr, d + 6, &nibble);
-
- if (chan->local_addr)
- len += byte_to_nibble(chan->local_addr, d + 6 + len, &nibble);
-
- if (nibble)
- ++len;
-
- d[5] = mylen << 4 | remotelen;
- d[6 + len + 1] = 0xCC; /* TCP/IP over X.25, thanks to Daniela :) */
-
- if ((err = x25_exec(card, X25_CONNECT_REQUEST, chan->link,
- &d, 7 + len + 1, NULL, 0)) != 0)
- clear_bit(--key, (void*)&card->u.x.connection_keys);
- else
- chan->lcn = -key;
-
- return err;
-}
-
-/* Place X.25 CONNECT RESPONSE. */
-static int cycx_x25_connect_response(struct cycx_device *card,
- struct cycx_x25_channel *chan)
-{
- u8 d[8];
-
- memset(d, 0, sizeof(d));
- d[0] = d[3] = chan->lcn;
- d[2] = 0x10;
- d[4] = 0x0F;
- d[7] = 0xCC; /* TCP/IP over X.25, thanks Daniela */
-
- return x25_exec(card, X25_CONNECT_RESPONSE, chan->link, &d, 8, NULL, 0);
-}
-
-/* Place X.25 DISCONNECT RESPONSE. */
-static int cycx_x25_disconnect_response(struct cycx_device *card, u8 link,
- u8 lcn)
-{
- char d[5];
-
- memset(d, 0, sizeof(d));
- d[0] = d[3] = lcn;
- d[2] = 0x10;
- d[4] = 0x17;
-
- return x25_exec(card, X25_DISCONNECT_RESPONSE, link, &d, 5, NULL, 0);
-}
-
-/* Clear X.25 call. */
-static int x25_clear_call(struct cycx_device *card, u8 link, u8 lcn, u8 cause,
- u8 diagn)
-{
- u8 d[7];
-
- memset(d, 0, sizeof(d));
- d[0] = d[3] = lcn;
- d[2] = 0x10;
- d[4] = 0x13;
- d[5] = cause;
- d[6] = diagn;
-
- return x25_exec(card, X25_DISCONNECT_REQUEST, link, d, 7, NULL, 0);
-}
-
-/* Send X.25 data packet. */
-static int cycx_x25_send(struct cycx_device *card, u8 link, u8 lcn, u8 bitm,
- int len, void *buf)
-{
- u8 d[] = "?\xFF\x10??";
-
- d[0] = d[3] = lcn;
- d[4] = bitm;
-
- return x25_exec(card, X25_DATA_REQUEST, link, &d, 5, buf, len);
-}
-
-/* Miscellaneous */
-/* Find network device by its channel number. */
-static struct net_device *cycx_x25_get_dev_by_lcn(struct wan_device *wandev,
- s16 lcn)
-{
- struct net_device *dev = wandev->dev;
- struct cycx_x25_channel *chan;
-
- while (dev) {
- chan = netdev_priv(dev);
-
- if (chan->lcn == lcn)
- break;
- dev = chan->slave;
- }
- return dev;
-}
-
-/* Find network device by its remote dte address. */
-static struct net_device *
- cycx_x25_get_dev_by_dte_addr(struct wan_device *wandev, char *dte)
-{
- struct net_device *dev = wandev->dev;
- struct cycx_x25_channel *chan;
-
- while (dev) {
- chan = netdev_priv(dev);
-
- if (!strcmp(chan->addr, dte))
- break;
- dev = chan->slave;
- }
- return dev;
-}
-
-/* Initiate connection on the logical channel.
- * o for PVC we just get channel configuration
- * o for SVCs place an X.25 call
- *
- * Return: 0 connected
- * >0 connection in progress
- * <0 failure */
-static int cycx_x25_chan_connect(struct net_device *dev)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
- struct cycx_device *card = chan->card;
-
- if (chan->svc) {
- if (!chan->addr[0])
- return -EINVAL; /* no destination address */
-
- dprintk(1, KERN_INFO "%s: placing X.25 call to %s...\n",
- card->devname, chan->addr);
-
- if (x25_place_call(card, chan))
- return -EIO;
-
- cycx_x25_set_chan_state(dev, WAN_CONNECTING);
- return 1;
- } else
- cycx_x25_set_chan_state(dev, WAN_CONNECTED);
-
- return 0;
-}
-
-/* Disconnect logical channel.
- * o if SVC then clear X.25 call */
-static void cycx_x25_chan_disconnect(struct net_device *dev)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
-
- if (chan->svc) {
- x25_clear_call(chan->card, chan->link, chan->lcn, 0, 0);
- cycx_x25_set_chan_state(dev, WAN_DISCONNECTING);
- } else
- cycx_x25_set_chan_state(dev, WAN_DISCONNECTED);
-}
-
-/* Called by kernel timer */
-static void cycx_x25_chan_timer(unsigned long d)
-{
- struct net_device *dev = (struct net_device *)d;
- struct cycx_x25_channel *chan = netdev_priv(dev);
-
- if (chan->state == WAN_CONNECTED)
- cycx_x25_chan_disconnect(dev);
- else
- pr_err("%s: %s for svc (%s) not connected!\n",
- chan->card->devname, __func__, dev->name);
-}
-
-/* Set logical channel state. */
-static void cycx_x25_set_chan_state(struct net_device *dev, u8 state)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
- struct cycx_device *card = chan->card;
- unsigned long flags;
- char *string_state = NULL;
-
- spin_lock_irqsave(&card->lock, flags);
-
- if (chan->state != state) {
- if (chan->svc && chan->state == WAN_CONNECTED)
- del_timer(&chan->timer);
-
- switch (state) {
- case WAN_CONNECTED:
- string_state = "connected!";
- *(__be16*)dev->dev_addr = htons(chan->lcn);
- netif_wake_queue(dev);
- reset_timer(dev);
-
- if (chan->protocol == ETH_P_X25)
- cycx_x25_chan_send_event(dev,
- X25_IFACE_CONNECT);
-
- break;
- case WAN_CONNECTING:
- string_state = "connecting...";
- break;
- case WAN_DISCONNECTING:
- string_state = "disconnecting...";
- break;
- case WAN_DISCONNECTED:
- string_state = "disconnected!";
-
- if (chan->svc) {
- *(unsigned short*)dev->dev_addr = 0;
- chan->lcn = 0;
- }
-
- if (chan->protocol == ETH_P_X25)
- cycx_x25_chan_send_event(dev,
- X25_IFACE_DISCONNECT);
-
- netif_wake_queue(dev);
- break;
- }
-
- pr_info("%s: interface %s %s\n",
- card->devname, dev->name, string_state);
- chan->state = state;
- }
-
- spin_unlock_irqrestore(&card->lock, flags);
-}
-
-/* Send packet on a logical channel.
- * When this function is called, tx_skb field of the channel data space
- * points to the transmit socket buffer. When transmission is complete,
- * release socket buffer and reset 'tbusy' flag.
- *
- * Return: 0 - transmission complete
- * 1 - busy
- *
- * Notes:
- * 1. If packet length is greater than MTU for this channel, we'll fragment
- * the packet into 'complete sequence' using M-bit.
- * 2. When transmission is complete, an event notification should be issued
- * to the router. */
-static int cycx_x25_chan_send(struct net_device *dev, struct sk_buff *skb)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
- struct cycx_device *card = chan->card;
- int bitm = 0; /* final packet */
- unsigned len = skb->len;
-
- if (skb->len > card->wandev.mtu) {
- len = card->wandev.mtu;
- bitm = 0x10; /* set M-bit (more data) */
- }
-
- if (cycx_x25_send(card, chan->link, chan->lcn, bitm, len, skb->data))
- return 1;
-
- if (bitm) {
- skb_pull(skb, len);
- return 1;
- }
-
- ++chan->ifstats.tx_packets;
- chan->ifstats.tx_bytes += len;
-
- return 0;
-}
-
-/* Send event (connection, disconnection, etc) to X.25 socket layer */
-
-static void cycx_x25_chan_send_event(struct net_device *dev, u8 event)
-{
- struct sk_buff *skb;
- unsigned char *ptr;
-
- if ((skb = dev_alloc_skb(1)) == NULL) {
- pr_err("%s: out of memory\n", __func__);
- return;
- }
-
- ptr = skb_put(skb, 1);
- *ptr = event;
-
- skb->protocol = x25_type_trans(skb, dev);
- netif_rx(skb);
-}
-
-/* Convert line speed in bps to a number used by cyclom 2x code. */
-static u8 bps_to_speed_code(u32 bps)
-{
- u8 number = 0; /* defaults to the lowest (1200) speed ;> */
-
- if (bps >= 512000) number = 8;
- else if (bps >= 256000) number = 7;
- else if (bps >= 64000) number = 6;
- else if (bps >= 38400) number = 5;
- else if (bps >= 19200) number = 4;
- else if (bps >= 9600) number = 3;
- else if (bps >= 4800) number = 2;
- else if (bps >= 2400) number = 1;
-
- return number;
-}
-
-/* log base 2 */
-static u8 cycx_log2(u32 n)
-{
- u8 log = 0;
-
- if (!n)
- return 0;
-
- while (n > 1) {
- n >>= 1;
- ++log;
- }
-
- return log;
-}
-
-/* Convert decimal string to unsigned integer.
- * If len != 0 then only 'len' characters of the string are converted. */
-static unsigned dec_to_uint(u8 *str, int len)
-{
- unsigned val = 0;
-
- if (!len)
- len = strlen(str);
-
- for (; len && isdigit(*str); ++str, --len)
- val = (val * 10) + (*str - (unsigned) '0');
-
- return val;
-}
-
-static void reset_timer(struct net_device *dev)
-{
- struct cycx_x25_channel *chan = netdev_priv(dev);
-
- if (chan->svc)
- mod_timer(&chan->timer, jiffies+chan->idle_tmout*HZ);
-}
-#ifdef CYCLOMX_X25_DEBUG
-static void cycx_x25_dump_config(struct cycx_x25_config *conf)
-{
- pr_info("X.25 configuration\n");
- pr_info("-----------------\n");
- pr_info("link number=%d\n", conf->link);
- pr_info("line speed=%d\n", conf->speed);
- pr_info("clock=%sternal\n", conf->clock == 8 ? "Ex" : "In");
- pr_info("# level 2 retransm.=%d\n", conf->n2);
- pr_info("level 2 window=%d\n", conf->n2win);
- pr_info("level 3 window=%d\n", conf->n3win);
- pr_info("# logical channels=%d\n", conf->nvc);
- pr_info("level 3 pkt len=%d\n", conf->pktlen);
- pr_info("my address=%d\n", conf->locaddr);
- pr_info("remote address=%d\n", conf->remaddr);
- pr_info("t1=%d seconds\n", conf->t1);
- pr_info("t2=%d seconds\n", conf->t2);
- pr_info("t21=%d seconds\n", conf->t21);
- pr_info("# PVCs=%d\n", conf->npvc);
- pr_info("t23=%d seconds\n", conf->t23);
- pr_info("flags=0x%x\n", conf->flags);
-}
-
-static void cycx_x25_dump_stats(struct cycx_x25_stats *stats)
-{
- pr_info("X.25 statistics\n");
- pr_info("--------------\n");
- pr_info("rx_crc_errors=%d\n", stats->rx_crc_errors);
- pr_info("rx_over_errors=%d\n", stats->rx_over_errors);
- pr_info("n2_tx_frames=%d\n", stats->n2_tx_frames);
- pr_info("n2_rx_frames=%d\n", stats->n2_rx_frames);
- pr_info("tx_timeouts=%d\n", stats->tx_timeouts);
- pr_info("rx_timeouts=%d\n", stats->rx_timeouts);
- pr_info("n3_tx_packets=%d\n", stats->n3_tx_packets);
- pr_info("n3_rx_packets=%d\n", stats->n3_rx_packets);
- pr_info("tx_aborts=%d\n", stats->tx_aborts);
- pr_info("rx_aborts=%d\n", stats->rx_aborts);
-}
-
-static void cycx_x25_dump_devs(struct wan_device *wandev)
-{
- struct net_device *dev = wandev->dev;
-
- pr_info("X.25 dev states\n");
- pr_info("name: addr: txoff: protocol:\n");
- pr_info("---------------------------------------\n");
-
- while(dev) {
- struct cycx_x25_channel *chan = netdev_priv(dev);
-
- pr_info("%-5.5s %-15.15s %d ETH_P_%s\n",
- chan->name, chan->addr, netif_queue_stopped(dev),
- chan->protocol == ETH_P_IP ? "IP" : "X25");
- dev = chan->slave;
- }
-}
-
-#endif /* CYCLOMX_X25_DEBUG */
-/* End */
diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h
deleted file mode 100644
index b88f7f428e58..000000000000
--- a/include/linux/cyclomx.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _CYCLOMX_H
-#define _CYCLOMX_H
-/*
-* cyclomx.h Cyclom 2X WAN Link Driver.
-* User-level API definitions.
-*
-* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on wanpipe.h by Gene Kozin <genek@compuserve.com>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* 2000/07/13 acme remove crap #if KERNEL_VERSION > blah
-* 2000/01/21 acme rename cyclomx_open to cyclomx_mod_inc_use_count
-* and cyclomx_close to cyclomx_mod_dec_use_count
-* 1999/05/19 acme wait_queue_head_t wait_stats(support for 2.3.*)
-* 1999/01/03 acme judicious use of data types
-* 1998/12/27 acme cleanup: PACKED not needed
-* 1998/08/08 acme Version 0.0.1
-*/
-
-#include <linux/wanrouter.h>
-#include <linux/spinlock.h>
-
-#ifdef __KERNEL__
-/* Kernel Interface */
-
-#include <linux/cycx_drv.h> /* Cyclom 2X support module API definitions */
-#include <linux/cycx_cfm.h> /* Cyclom 2X firmware module definitions */
-#ifdef CONFIG_CYCLOMX_X25
-#include <linux/cycx_x25.h>
-#endif
-
-/* Adapter Data Space.
- * This structure is needed because we handle multiple cards, otherwise
- * static data would do it.
- */
-struct cycx_device {
- char devname[WAN_DRVNAME_SZ + 1];/* card name */
- struct cycx_hw hw; /* hardware configuration */
- struct wan_device wandev; /* WAN device data space */
- u32 state_tick; /* link state timestamp */
- spinlock_t lock;
- char in_isr; /* interrupt-in-service flag */
- char buff_int_mode_unbusy; /* flag for carrying out dev_tint */
- wait_queue_head_t wait_stats; /* to wait for the STATS indication */
- void __iomem *mbox; /* -> mailbox */
- void (*isr)(struct cycx_device* card); /* interrupt service routine */
- int (*exec)(struct cycx_device* card, void* u_cmd, void* u_data);
- union {
-#ifdef CONFIG_CYCLOMX_X25
- struct { /* X.25 specific data */
- u32 lo_pvc;
- u32 hi_pvc;
- u32 lo_svc;
- u32 hi_svc;
- struct cycx_x25_stats stats;
- spinlock_t lock;
- u32 connection_keys;
- } x;
-#endif
- } u;
-};
-
-/* Public Functions */
-void cycx_set_state(struct cycx_device *card, int state);
-
-#ifdef CONFIG_CYCLOMX_X25
-int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf);
-#endif
-#endif /* __KERNEL__ */
-#endif /* _CYCLOMX_H */
diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h
deleted file mode 100644
index 12fe6b0bfcff..000000000000
--- a/include/linux/cycx_drv.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-* cycx_drv.h CYCX Support Module. Kernel API Definitions.
-*
-* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdladrv.h by Gene Kozin <genek@compuserve.com>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* 1999/10/23 acme cycxhw_t cleanup
-* 1999/01/03 acme more judicious use of data types...
-* uclong, ucchar, etc deleted, the u8, u16, u32
-* types are the portable way to go.
-* 1999/01/03 acme judicious use of data types... u16, u32, etc
-* 1998/12/26 acme FIXED_BUFFERS, CONF_OFFSET,
-* removal of cy_read{bwl}
-* 1998/08/08 acme Initial version.
-*/
-#ifndef _CYCX_DRV_H
-#define _CYCX_DRV_H
-
-#define CYCX_WINDOWSIZE 0x4000 /* default dual-port memory window size */
-#define GEN_CYCX_INTR 0x02
-#define RST_ENABLE 0x04
-#define START_CPU 0x06
-#define RST_DISABLE 0x08
-#define FIXED_BUFFERS 0x08
-#define TEST_PATTERN 0xaa55
-#define CMD_OFFSET 0x20
-#define CONF_OFFSET 0x0380
-#define RESET_OFFSET 0x3c00 /* For reset file load */
-#define DATA_OFFSET 0x0100 /* For code and data files load */
-#define START_OFFSET 0x3ff0 /* 80186 starts here */
-
-/**
- * struct cycx_hw - Adapter hardware configuration
- * @fwid - firmware ID
- * @irq - interrupt request level
- * @dpmbase - dual-port memory base
- * @dpmsize - dual-port memory size
- * @reserved - reserved for future use
- */
-struct cycx_hw {
- u32 fwid;
- int irq;
- void __iomem *dpmbase;
- u32 dpmsize;
- u32 reserved[5];
-};
-
-/* Function Prototypes */
-extern int cycx_setup(struct cycx_hw *hw, void *sfm, u32 len, unsigned long base);
-extern int cycx_down(struct cycx_hw *hw);
-extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
-extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
-extern int cycx_exec(void __iomem *addr);
-
-extern void cycx_intr(struct cycx_hw *hw);
-#endif /* _CYCX_DRV_H */
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
index cec4b4159767..8198a63cf459 100644
--- a/include/linux/wanrouter.h
+++ b/include/linux/wanrouter.h
@@ -1,129 +1,10 @@
-/*****************************************************************************
-* wanrouter.h Definitions for the WAN Multiprotocol Router Module.
-* This module provides API and common services for WAN Link
-* Drivers and is completely hardware-independent.
-*
-* Author: Nenad Corbic <ncorbic@sangoma.com>
-* Gideon Hack
-* Additions: Arnaldo Melo
-*
-* Copyright: (c) 1995-2000 Sangoma Technologies Inc.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State
-* Feb 24, 2000 Nenad Corbic Added support for socket based x25api
-* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol.
-* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release
-* Jun 02, 1999 Gideon Hack Added support for the S514 adapter.
-* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t
-* WAN_DISCONNECTING state added
-* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t'
-* Jun 12, 1998 David Fong Added Cisco HDLC support.
-* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to
-* 'wanif_conf_t'
-* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t'
-* Added 'authenticator' to 'wan_ppp_conf_t'
-* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0
-* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
-* Added 'enable_IPX' and 'network_number' to
-* 'wan_device_t'. Also added defines for
-* UDP PACKET TYPE, Interrupt test, critical values
-* for RACE conditions.
-* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to
-* 'wan_fr_conf_t' to configure a list of dlci(s)
-* for a NODE
-* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
-* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t'
-* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t'
-* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t'
-* Jan 16, 1997 Gene Kozin router_devlist made public
-* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h).
-*****************************************************************************/
+/*
+ * wanrouter.h Legacy declarations kept around until X25 is removed
+ */
+
#ifndef _ROUTER_H
#define _ROUTER_H
#include <uapi/linux/wanrouter.h>
-/****** Kernel Interface ****************************************************/
-
-#include <linux/fs.h> /* support for device drivers */
-#include <linux/proc_fs.h> /* proc filesystem pragmatics */
-#include <linux/netdevice.h> /* support for network drivers */
-#include <linux/spinlock.h> /* Support for SMP Locking */
-
-/*----------------------------------------------------------------------------
- * WAN device data space.
- */
-struct wan_device {
- unsigned magic; /* magic number */
- char* name; /* -> WAN device name (ASCIIZ) */
- void* private; /* -> driver private data */
- unsigned config_id; /* Configuration ID */
- /****** hardware configuration ******/
- unsigned ioport; /* adapter I/O port base #1 */
- char S514_cpu_no[1]; /* PCI CPU Number */
- unsigned char S514_slot_no; /* PCI Slot Number */
- unsigned long maddr; /* dual-port memory address */
- unsigned msize; /* dual-port memory size */
- int irq; /* interrupt request level */
- int dma; /* DMA request level */
- unsigned bps; /* data transfer rate */
- unsigned mtu; /* max physical transmit unit size */
- unsigned udp_port; /* UDP port for management */
- unsigned char ttl; /* Time To Live for UDP security */
- unsigned enable_tx_int; /* Transmit Interrupt enabled or not */
- char interface; /* RS-232/V.35, etc. */
- char clocking; /* external/internal */
- char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */
- char station; /* DTE/DCE, primary/secondary, etc. */
- char connection; /* permanent/switched/on-demand */
- char signalling; /* Signalling RS232 or V35 */
- char read_mode; /* read mode: Polling or interrupt */
- char new_if_cnt; /* Number of interfaces per wanpipe */
- char del_if_cnt; /* Number of times del_if() gets called */
- unsigned char piggyback; /* Piggibacking a port */
- unsigned hw_opt[4]; /* other hardware options */
- /****** status and statistics *******/
- char state; /* device state */
- char api_status; /* device api status */
- struct net_device_stats stats; /* interface statistics */
- unsigned reserved[16]; /* reserved for future use */
- unsigned long critical; /* critical section flag */
- spinlock_t lock; /* Support for SMP Locking */
-
- /****** device management methods ***/
- int (*setup) (struct wan_device *wandev, wandev_conf_t *conf);
- int (*shutdown) (struct wan_device *wandev);
- int (*update) (struct wan_device *wandev);
- int (*ioctl) (struct wan_device *wandev, unsigned cmd,
- unsigned long arg);
- int (*new_if)(struct wan_device *wandev, struct net_device *dev,
- wanif_conf_t *conf);
- int (*del_if)(struct wan_device *wandev, struct net_device *dev);
- /****** maintained by the router ****/
- struct wan_device* next; /* -> next device */
- struct net_device* dev; /* list of network interfaces */
- unsigned ndev; /* number of interfaces */
- struct proc_dir_entry *dent; /* proc filesystem entry */
-};
-
-/* Public functions available for device drivers */
-extern int register_wan_device(struct wan_device *wandev);
-extern int unregister_wan_device(char *name);
-
-/* Proc interface functions. These must not be called by the drivers! */
-extern int wanrouter_proc_init(void);
-extern void wanrouter_proc_cleanup(void);
-extern int wanrouter_proc_add(struct wan_device *wandev);
-extern int wanrouter_proc_delete(struct wan_device *wandev);
-extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-
-/* Public Data */
-/* list of registered devices */
-extern struct wan_device *wanrouter_router_devlist;
-
#endif /* _ROUTER_H */
diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h
index 7617df2833d5..498d6c12c666 100644
--- a/include/uapi/linux/wanrouter.h
+++ b/include/uapi/linux/wanrouter.h
@@ -1,363 +1,9 @@
-/*****************************************************************************
-* wanrouter.h Definitions for the WAN Multiprotocol Router Module.
-* This module provides API and common services for WAN Link
-* Drivers and is completely hardware-independent.
-*
-* Author: Nenad Corbic <ncorbic@sangoma.com>
-* Gideon Hack
-* Additions: Arnaldo Melo
-*
-* Copyright: (c) 1995-2000 Sangoma Technologies Inc.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State
-* Feb 24, 2000 Nenad Corbic Added support for socket based x25api
-* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol.
-* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release
-* Jun 02, 1999 Gideon Hack Added support for the S514 adapter.
-* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t
-* WAN_DISCONNECTING state added
-* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t'
-* Jun 12, 1998 David Fong Added Cisco HDLC support.
-* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to
-* 'wanif_conf_t'
-* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t'
-* Added 'authenticator' to 'wan_ppp_conf_t'
-* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0
-* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
-* Added 'enable_IPX' and 'network_number' to
-* 'wan_device_t'. Also added defines for
-* UDP PACKET TYPE, Interrupt test, critical values
-* for RACE conditions.
-* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to
-* 'wan_fr_conf_t' to configure a list of dlci(s)
-* for a NODE
-* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
-* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t'
-* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t'
-* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t'
-* Jan 16, 1997 Gene Kozin router_devlist made public
-* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h).
-*****************************************************************************/
-
-#ifndef _UAPI_ROUTER_H
-#define _UAPI_ROUTER_H
-
-#define ROUTER_NAME "wanrouter" /* in case we ever change it */
-#define ROUTER_VERSION 1 /* version number */
-#define ROUTER_RELEASE 1 /* release (minor version) number */
-#define ROUTER_IOCTL 'W' /* for IOCTL calls */
-#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */
-
-/* IOCTL codes for /proc/router/<device> entries (up to 255) */
-enum router_ioctls
-{
- ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */
- ROUTER_DOWN, /* shut down device */
- ROUTER_STAT, /* get device status */
- ROUTER_IFNEW, /* add interface */
- ROUTER_IFDEL, /* delete interface */
- ROUTER_IFSTAT, /* get interface status */
- ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */
- ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31
-};
-
-/* identifiers for displaying proc file data for dual port adapters */
-#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */
-#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */
-
-/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
-#define NLPID_IP 0xCC /* Internet Protocol Datagram */
-#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */
-#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */
-#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */
-#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */
-#define NLPID_Q933 0x08 /* CCITT Q.933 */
-
-/* Miscellaneous */
-#define WAN_IFNAME_SZ 15 /* max length of the interface name */
-#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */
-#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */
-#define USED_BY_FIELD 8 /* max length of the used by field */
-
-/* Defines for UDP PACKET TYPE */
-#define UDP_PTPIPE_TYPE 0x01
-#define UDP_FPIPE_TYPE 0x02
-#define UDP_CPIPE_TYPE 0x03
-#define UDP_DRVSTATS_TYPE 0x04
-#define UDP_INVALID_TYPE 0x05
-
-/* Command return code */
-#define CMD_OK 0 /* normal firmware return code */
-#define CMD_TIMEOUT 0xFF /* firmware command timed out */
-
-/* UDP Packet Management */
-#define UDP_PKT_FRM_STACK 0x00
-#define UDP_PKT_FRM_NETWORK 0x01
-
-/* Maximum interrupt test counter */
-#define MAX_INTR_TEST_COUNTER 100
-
-/* Critical Values for RACE conditions*/
-#define CRITICAL_IN_ISR 0xA1
-#define CRITICAL_INTR_HANDLED 0xB1
-
-/****** Data Types **********************************************************/
-
-/*----------------------------------------------------------------------------
- * X.25-specific link-level configuration.
- */
-typedef struct wan_x25_conf
-{
- unsigned lo_pvc; /* lowest permanent circuit number */
- unsigned hi_pvc; /* highest permanent circuit number */
- unsigned lo_svc; /* lowest switched circuit number */
- unsigned hi_svc; /* highest switched circuit number */
- unsigned hdlc_window; /* HDLC window size (1..7) */
- unsigned pkt_window; /* X.25 packet window size (1..7) */
- unsigned t1; /* HDLC timer T1, sec (1..30) */
- unsigned t2; /* HDLC timer T2, sec (0..29) */
- unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */
- unsigned n2; /* HDLC retransmission limit (1..30) */
- unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */
- unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */
- unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */
- unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */
- unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */
- unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */
- unsigned r10_r20; /* RESTART retransmission limit (0..250) */
- unsigned r12_r22; /* RESET retransmission limit (0..250) */
- unsigned r13_r23; /* CLEAR retransmission limit (0..250) */
- unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */
- unsigned x25_conf_opt; /* User defined x25 config optoins */
- unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
- unsigned char logging; /* Control connection logging */
- unsigned char oob_on_modem; /* Whether to send modem status to the user app */
-} wan_x25_conf_t;
-
-/*----------------------------------------------------------------------------
- * Frame relay specific link-level configuration.
- */
-typedef struct wan_fr_conf
-{
- unsigned signalling; /* local in-channel signalling type */
- unsigned t391; /* link integrity verification timer */
- unsigned t392; /* polling verification timer */
- unsigned n391; /* full status polling cycle counter */
- unsigned n392; /* error threshold counter */
- unsigned n393; /* monitored events counter */
- unsigned dlci_num; /* number of DLCs (access node) */
- unsigned dlci[100]; /* List of all DLCIs */
-} wan_fr_conf_t;
-
-/*----------------------------------------------------------------------------
- * PPP-specific link-level configuration.
- */
-typedef struct wan_ppp_conf
-{
- unsigned restart_tmr; /* restart timer */
- unsigned auth_rsrt_tmr; /* authentication timer */
- unsigned auth_wait_tmr; /* authentication timer */
- unsigned mdm_fail_tmr; /* modem failure timer */
- unsigned dtr_drop_tmr; /* DTR drop timer */
- unsigned connect_tmout; /* connection timeout */
- unsigned conf_retry; /* max. retry */
- unsigned term_retry; /* max. retry */
- unsigned fail_retry; /* max. retry */
- unsigned auth_retry; /* max. retry */
- unsigned auth_options; /* authentication opt. */
- unsigned ip_options; /* IP options */
- char authenticator; /* AUTHENTICATOR or not */
- char ip_mode; /* Static/Host/Peer */
-} wan_ppp_conf_t;
-
-/*----------------------------------------------------------------------------
- * CHDLC-specific link-level configuration.
- */
-typedef struct wan_chdlc_conf
-{
- unsigned char ignore_dcd; /* Protocol options: */
- unsigned char ignore_cts; /* Ignore these to determine */
- unsigned char ignore_keepalive; /* link status (Yes or No) */
- unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */
- unsigned char receive_only; /* no transmit buffering (Y/N) */
- unsigned keepalive_tx_tmr; /* transmit keepalive timer */
- unsigned keepalive_rx_tmr; /* receive keepalive timer */
- unsigned keepalive_err_margin; /* keepalive_error_tolerance */
- unsigned slarp_timer; /* SLARP request timer */
-} wan_chdlc_conf_t;
-
-
-/*----------------------------------------------------------------------------
- * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
- */
-typedef struct wandev_conf
-{
- unsigned magic; /* magic number (for verification) */
- unsigned config_id; /* configuration structure identifier */
- /****** hardware configuration ******/
- unsigned ioport; /* adapter I/O port base */
- unsigned long maddr; /* dual-port memory address */
- unsigned msize; /* dual-port memory size */
- int irq; /* interrupt request level */
- int dma; /* DMA request level */
- char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */
- unsigned PCI_slot_no; /* S514 PCI adapter slot number */
- char auto_pci_cfg; /* S515 PCI automatic slot detection */
- char comm_port; /* Communication Port (PRI=0, SEC=1) */
- unsigned bps; /* data transfer rate */
- unsigned mtu; /* maximum transmit unit size */
- unsigned udp_port; /* UDP port for management */
- unsigned char ttl; /* Time To Live for UDP security */
- unsigned char ft1; /* FT1 Configurator Option */
- char interface; /* RS-232/V.35, etc. */
- char clocking; /* external/internal */
- char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */
- char station; /* DTE/DCE, primary/secondary, etc. */
- char connection; /* permanent/switched/on-demand */
- char read_mode; /* read mode: Polling or interrupt */
- char receive_only; /* disable tx buffers */
- char tty; /* Create a fake tty device */
- unsigned tty_major; /* Major number for wanpipe tty device */
- unsigned tty_minor; /* Minor number for wanpipe tty device */
- unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */
- char backup; /* Backup Mode */
- unsigned hw_opt[4]; /* other hardware options */
- unsigned reserved[4];
- /****** arbitrary data ***************/
- unsigned data_size; /* data buffer size */
- void* data; /* data buffer, e.g. firmware */
- union /****** protocol-specific ************/
- {
- wan_x25_conf_t x25; /* X.25 configuration */
- wan_ppp_conf_t ppp; /* PPP configuration */
- wan_fr_conf_t fr; /* frame relay configuration */
- wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */
- } u;
-} wandev_conf_t;
-
-/* 'config_id' definitions */
-#define WANCONFIG_X25 101 /* X.25 link */
-#define WANCONFIG_FR 102 /* frame relay link */
-#define WANCONFIG_PPP 103 /* synchronous PPP link */
-#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */
-#define WANCONFIG_BSC 105 /* BiSync Streaming */
-#define WANCONFIG_HDLC 106 /* HDLC Support */
-#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */
-
/*
- * Configuration options defines.
+ * wanrouter.h Legacy declarations kept around until X25 is removed
*/
-/* general options */
-#define WANOPT_OFF 0
-#define WANOPT_ON 1
-#define WANOPT_NO 0
-#define WANOPT_YES 1
-
-/* intercace options */
-#define WANOPT_RS232 0
-#define WANOPT_V35 1
-
-/* data encoding options */
-#define WANOPT_NRZ 0
-#define WANOPT_NRZI 1
-#define WANOPT_FM0 2
-#define WANOPT_FM1 3
-
-/* link type options */
-#define WANOPT_POINTTOPOINT 0 /* RTS always active */
-#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */
-
-/* clocking options */
-#define WANOPT_EXTERNAL 0
-#define WANOPT_INTERNAL 1
-
-/* station options */
-#define WANOPT_DTE 0
-#define WANOPT_DCE 1
-#define WANOPT_CPE 0
-#define WANOPT_NODE 1
-#define WANOPT_SECONDARY 0
-#define WANOPT_PRIMARY 1
-
-/* connection options */
-#define WANOPT_PERMANENT 0 /* DTR always active */
-#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */
-#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */
-
-/* frame relay in-channel signalling */
-#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */
-#define WANOPT_FR_Q933 2 /* ITU Q.933A */
-#define WANOPT_FR_LMI 3 /* LMI */
-
-/* PPP IP Mode Options */
-#define WANOPT_PPP_STATIC 0
-#define WANOPT_PPP_HOST 1
-#define WANOPT_PPP_PEER 2
-
-/* ASY Mode Options */
-#define WANOPT_ONE 1
-#define WANOPT_TWO 2
-#define WANOPT_ONE_AND_HALF 3
-
-#define WANOPT_NONE 0
-#define WANOPT_ODD 1
-#define WANOPT_EVEN 2
-
-/* CHDLC Protocol Options */
-/* DF Commented out for now.
-
-#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT
-*/
-
-/* Port options */
-#define WANOPT_PRI 0
-#define WANOPT_SEC 1
-/* read mode */
-#define WANOPT_INTR 0
-#define WANOPT_POLL 1
-
-#define WANOPT_TTY_SYNC 0
-#define WANOPT_TTY_ASYNC 1
-/*----------------------------------------------------------------------------
- * WAN Link Status Info (for ROUTER_STAT IOCTL).
- */
-typedef struct wandev_stat
-{
- unsigned state; /* link state */
- unsigned ndev; /* number of configured interfaces */
-
- /* link/interface configuration */
- unsigned connection; /* permanent/switched/on-demand */
- unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */
- unsigned mtu; /* max. transmit unit for this device */
-
- /* physical level statistics */
- unsigned modem_status; /* modem status */
- unsigned rx_frames; /* received frames count */
- unsigned rx_overruns; /* receiver overrun error count */
- unsigned rx_crc_err; /* receive CRC error count */
- unsigned rx_aborts; /* received aborted frames count */
- unsigned rx_bad_length; /* unexpetedly long/short frames count */
- unsigned rx_dropped; /* frames discarded at device level */
- unsigned tx_frames; /* transmitted frames count */
- unsigned tx_underruns; /* aborted transmissions (underruns) count */
- unsigned tx_timeouts; /* transmission timeouts */
- unsigned tx_rejects; /* other transmit errors */
-
- /* media level statistics */
- unsigned rx_bad_format; /* frames with invalid format */
- unsigned rx_bad_addr; /* frames with invalid media address */
- unsigned tx_retries; /* frames re-transmitted */
- unsigned reserved[16]; /* reserved for future use */
-} wandev_stat_t;
+#ifndef _UAPI_ROUTER_H
+#define _UAPI_ROUTER_H
/* 'state' defines */
enum wan_states
@@ -365,88 +11,7 @@ enum wan_states
WAN_UNCONFIGURED, /* link/channel is not configured */
WAN_DISCONNECTED, /* link/channel is disconnected */
WAN_CONNECTING, /* connection is in progress */
- WAN_CONNECTED, /* link/channel is operational */
- WAN_LIMIT, /* for verification only */
- WAN_DUALPORT, /* for Dual Port cards */
- WAN_DISCONNECTING,
- WAN_FT1_READY /* FT1 Configurator Ready */
+ WAN_CONNECTED /* link/channel is operational */
};
-enum {
- WAN_LOCAL_IP,
- WAN_POINTOPOINT_IP,
- WAN_NETMASK_IP,
- WAN_BROADCAST_IP
-};
-
-/* 'modem_status' masks */
-#define WAN_MODEM_CTS 0x0001 /* CTS line active */
-#define WAN_MODEM_DCD 0x0002 /* DCD line active */
-#define WAN_MODEM_DTR 0x0010 /* DTR line active */
-#define WAN_MODEM_RTS 0x0020 /* RTS line active */
-
-/*----------------------------------------------------------------------------
- * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
- */
-typedef struct wanif_conf
-{
- unsigned magic; /* magic number */
- unsigned config_id; /* configuration identifier */
- char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */
- char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */
- char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */
- unsigned idle_timeout; /* sec, before disconnecting */
- unsigned hold_timeout; /* sec, before re-connecting */
- unsigned cir; /* Committed Information Rate fwd,bwd*/
- unsigned bc; /* Committed Burst Size fwd, bwd */
- unsigned be; /* Excess Burst Size fwd, bwd */
- unsigned char enable_IPX; /* Enable or Disable IPX */
- unsigned char inarp; /* Send Inverse ARP requests Y/N */
- unsigned inarp_interval; /* sec, between InARP requests */
- unsigned long network_number; /* Network Number for IPX */
- char mc; /* Multicast on or off */
- char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
- unsigned char port; /* board port */
- unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */
- char pap; /* PAP enabled or disabled */
- char chap; /* CHAP enabled or disabled */
- unsigned char userid[511]; /* List of User Id */
- unsigned char passwd[511]; /* List of passwords */
- unsigned char sysname[31]; /* Name of the system */
- unsigned char ignore_dcd; /* Protocol options: */
- unsigned char ignore_cts; /* Ignore these to determine */
- unsigned char ignore_keepalive; /* link status (Yes or No) */
- unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */
- unsigned keepalive_tx_tmr; /* transmit keepalive timer */
- unsigned keepalive_rx_tmr; /* receive keepalive timer */
- unsigned keepalive_err_margin; /* keepalive_error_tolerance */
- unsigned slarp_timer; /* SLARP request timer */
- unsigned char ttl; /* Time To Live for UDP security */
- char interface; /* RS-232/V.35, etc. */
- char clocking; /* external/internal */
- unsigned bps; /* data transfer rate */
- unsigned mtu; /* maximum transmit unit size */
- unsigned char if_down; /* brind down interface when disconnected */
- unsigned char gateway; /* Is this interface a gateway */
- unsigned char true_if_encoding; /* Set the dev->type to true board protocol */
-
- unsigned char asy_data_trans; /* async API options */
- unsigned char rts_hs_for_receive; /* async Protocol options */
- unsigned char xon_xoff_hs_for_receive;
- unsigned char xon_xoff_hs_for_transmit;
- unsigned char dcd_hs_for_transmit;
- unsigned char cts_hs_for_transmit;
- unsigned char async_mode;
- unsigned tx_bits_per_char;
- unsigned rx_bits_per_char;
- unsigned stop_bits;
- unsigned char parity;
- unsigned break_timer;
- unsigned inter_char_timer;
- unsigned rx_complete_length;
- unsigned xon_char;
- unsigned xoff_char;
- unsigned char receive_only; /* no transmit buffering (Y/N) */
-} wanif_conf_t;
-
#endif /* _UAPI_ROUTER_H */
diff --git a/net/wanrouter/Kconfig b/net/wanrouter/Kconfig
deleted file mode 100644
index a157a2e64e18..000000000000
--- a/net/wanrouter/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Configuration for WAN router
-#
-
-config WAN_ROUTER
- tristate "WAN router (DEPRECATED)"
- depends on EXPERIMENTAL
- ---help---
- Wide Area Networks (WANs), such as X.25, frame relay and leased
- lines, are used to interconnect Local Area Networks (LANs) over vast
- distances with data transfer rates significantly higher than those
- achievable with commonly used asynchronous modem connections.
- Usually, a quite expensive external device called a `WAN router' is
- needed to connect to a WAN.
-
- As an alternative, WAN routing can be built into the Linux kernel.
- With relatively inexpensive WAN interface cards available on the
- market, a perfectly usable router can be built for less than half
- the price of an external router. If you have one of those cards and
- wish to use your Linux box as a WAN router, say Y here and also to
- the WAN driver for your card, below. You will then need the
- wan-tools package which is available from <ftp://ftp.sangoma.com/>.
-
- To compile WAN routing support as a module, choose M here: the
- module will be called wanrouter.
-
- If unsure, say N.
diff --git a/net/wanrouter/Makefile b/net/wanrouter/Makefile
deleted file mode 100644
index 4da14bc48078..000000000000
--- a/net/wanrouter/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the Linux WAN router layer.
-#
-
-obj-$(CONFIG_WAN_ROUTER) += wanrouter.o
-
-wanrouter-y := wanproc.o wanmain.o
diff --git a/net/wanrouter/patchlevel b/net/wanrouter/patchlevel
deleted file mode 100644
index c043eea7767e..000000000000
--- a/net/wanrouter/patchlevel
+++ /dev/null
@@ -1 +0,0 @@
-2.2.1
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
deleted file mode 100644
index 2ab785064b7e..000000000000
--- a/net/wanrouter/wanmain.c
+++ /dev/null
@@ -1,782 +0,0 @@
-/*****************************************************************************
-* wanmain.c WAN Multiprotocol Router Module. Main code.
-*
-* This module is completely hardware-independent and provides
-* the following common services for the WAN Link Drivers:
-* o WAN device management (registering, unregistering)
-* o Network interface management
-* o Physical connection management (dial-up, incoming calls)
-* o Logical connection management (switched virtual circuits)
-* o Protocol encapsulation/decapsulation
-*
-* Author: Gideon Hack
-*
-* Copyright: (c) 1995-1999 Sangoma Technologies Inc.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* Nov 24, 2000 Nenad Corbic Updated for 2.4.X kernels
-* Nov 07, 2000 Nenad Corbic Fixed the Mulit-Port PPP for kernels 2.2.16 and
-* greater.
-* Aug 2, 2000 Nenad Corbic Block the Multi-Port PPP from running on
-* kernels 2.2.16 or greater. The SyncPPP
-* has changed.
-* Jul 13, 2000 Nenad Corbic Added SyncPPP support
-* Added extra debugging in device_setup().
-* Oct 01, 1999 Gideon Hack Update for s514 PCI card
-* Dec 27, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE)
-* Jan 16, 1997 Gene Kozin router_devlist made public
-* Jan 31, 1997 Alan Cox Hacked it about a bit for 2.1
-* Jun 27, 1997 Alan Cox realigned with vendor code
-* Oct 15, 1997 Farhan Thawar changed wan_encapsulate to add a pad byte of 0
-* Apr 20, 1998 Alan Cox Fixed 2.1 symbols
-* May 17, 1998 K. Baranowski Fixed SNAP encapsulation in wan_encapsulate
-* Dec 15, 1998 Arnaldo Melo support for firmwares of up to 128000 bytes
-* check wandev->setup return value
-* Dec 22, 1998 Arnaldo Melo vmalloc/vfree used in device_setup to allocate
-* kernel memory and copy configuration data to
-* kernel space (for big firmwares)
-* Jun 02, 1999 Gideon Hack Updates for Linux 2.0.X and 2.2.X kernels.
-*****************************************************************************/
-
-#include <linux/stddef.h> /* offsetof(), etc. */
-#include <linux/capability.h>
-#include <linux/errno.h> /* return codes */
-#include <linux/kernel.h>
-#include <linux/module.h> /* support for loadable modules */
-#include <linux/slab.h> /* kmalloc(), kfree() */
-#include <linux/mutex.h>
-#include <linux/mm.h>
-#include <linux/string.h> /* inline mem*, str* functions */
-
-#include <asm/byteorder.h> /* htons(), etc. */
-#include <linux/wanrouter.h> /* WAN router API definitions */
-
-#include <linux/vmalloc.h> /* vmalloc, vfree */
-#include <asm/uaccess.h> /* copy_to/from_user */
-#include <linux/init.h> /* __initfunc et al. */
-
-#define DEV_TO_SLAVE(dev) (*((struct net_device **)netdev_priv(dev)))
-
-/*
- * Function Prototypes
- */
-
-/*
- * WAN device IOCTL handlers
- */
-
-static DEFINE_MUTEX(wanrouter_mutex);
-static int wanrouter_device_setup(struct wan_device *wandev,
- wandev_conf_t __user *u_conf);
-static int wanrouter_device_stat(struct wan_device *wandev,
- wandev_stat_t __user *u_stat);
-static int wanrouter_device_shutdown(struct wan_device *wandev);
-static int wanrouter_device_new_if(struct wan_device *wandev,
- wanif_conf_t __user *u_conf);
-static int wanrouter_device_del_if(struct wan_device *wandev,
- char __user *u_name);
-
-/*
- * Miscellaneous
- */
-
-static struct wan_device *wanrouter_find_device(char *name);
-static int wanrouter_delete_interface(struct wan_device *wandev, char *name);
-static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags)
- __acquires(lock);
-static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags)
- __releases(lock);
-
-
-
-/*
- * Global Data
- */
-
-static char wanrouter_fullname[] = "Sangoma WANPIPE Router";
-static char wanrouter_copyright[] = "(c) 1995-2000 Sangoma Technologies Inc.";
-static char wanrouter_modname[] = ROUTER_NAME; /* short module name */
-struct wan_device* wanrouter_router_devlist; /* list of registered devices */
-
-/*
- * Organize Unique Identifiers for encapsulation/decapsulation
- */
-
-#if 0
-static unsigned char wanrouter_oui_ether[] = { 0x00, 0x00, 0x00 };
-static unsigned char wanrouter_oui_802_2[] = { 0x00, 0x80, 0xC2 };
-#endif
-
-static int __init wanrouter_init(void)
-{
- int err;
-
- printk(KERN_INFO "%s v%u.%u %s\n",
- wanrouter_fullname, ROUTER_VERSION, ROUTER_RELEASE,
- wanrouter_copyright);
-
- err = wanrouter_proc_init();
- if (err)
- printk(KERN_INFO "%s: can't create entry in proc filesystem!\n",
- wanrouter_modname);
-
- return err;
-}
-
-static void __exit wanrouter_cleanup (void)
-{
- wanrouter_proc_cleanup();
-}
-
-/*
- * This is just plain dumb. We should move the bugger to drivers/net/wan,
- * slap it first in directory and make it module_init(). The only reason
- * for subsys_initcall() here is that net goes after drivers (why, BTW?)
- */
-subsys_initcall(wanrouter_init);
-module_exit(wanrouter_cleanup);
-
-/*
- * Kernel APIs
- */
-
-/*
- * Register WAN device.
- * o verify device credentials
- * o create an entry for the device in the /proc/net/router directory
- * o initialize internally maintained fields of the wan_device structure
- * o link device data space to a singly-linked list
- * o if it's the first device, then start kernel 'thread'
- * o increment module use count
- *
- * Return:
- * 0 Ok
- * < 0 error.
- *
- * Context: process
- */
-
-
-int register_wan_device(struct wan_device *wandev)
-{
- int err, namelen;
-
- if ((wandev == NULL) || (wandev->magic != ROUTER_MAGIC) ||
- (wandev->name == NULL))
- return -EINVAL;
-
- namelen = strlen(wandev->name);
- if (!namelen || (namelen > WAN_DRVNAME_SZ))
- return -EINVAL;
-
- if (wanrouter_find_device(wandev->name))
- return -EEXIST;
-
-#ifdef WANDEBUG
- printk(KERN_INFO "%s: registering WAN device %s\n",
- wanrouter_modname, wandev->name);
-#endif
-
- /*
- * Register /proc directory entry
- */
- err = wanrouter_proc_add(wandev);
- if (err) {
- printk(KERN_INFO
- "%s: can't create /proc/net/router/%s entry!\n",
- wanrouter_modname, wandev->name);
- return err;
- }
-
- /*
- * Initialize fields of the wan_device structure maintained by the
- * router and update local data.
- */
-
- wandev->ndev = 0;
- wandev->dev = NULL;
- wandev->next = wanrouter_router_devlist;
- wanrouter_router_devlist = wandev;
- return 0;
-}
-
-/*
- * Unregister WAN device.
- * o shut down device
- * o unlink device data space from the linked list
- * o delete device entry in the /proc/net/router directory
- * o decrement module use count
- *
- * Return: 0 Ok
- * <0 error.
- * Context: process
- */
-
-
-int unregister_wan_device(char *name)
-{
- struct wan_device *wandev, *prev;
-
- if (name == NULL)
- return -EINVAL;
-
- for (wandev = wanrouter_router_devlist, prev = NULL;
- wandev && strcmp(wandev->name, name);
- prev = wandev, wandev = wandev->next)
- ;
- if (wandev == NULL)
- return -ENODEV;
-
-#ifdef WANDEBUG
- printk(KERN_INFO "%s: unregistering WAN device %s\n",
- wanrouter_modname, name);
-#endif
-
- if (wandev->state != WAN_UNCONFIGURED)
- wanrouter_device_shutdown(wandev);
-
- if (prev)
- prev->next = wandev->next;
- else
- wanrouter_router_devlist = wandev->next;
-
- wanrouter_proc_delete(wandev);
- return 0;
-}
-
-#if 0
-
-/*
- * Encapsulate packet.
- *
- * Return: encapsulation header size
- * < 0 - unsupported Ethertype
- *
- * Notes:
- * 1. This function may be called on interrupt context.
- */
-
-
-int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev,
- unsigned short type)
-{
- int hdr_len = 0;
-
- switch (type) {
- case ETH_P_IP: /* IP datagram encapsulation */
- hdr_len += 1;
- skb_push(skb, 1);
- skb->data[0] = NLPID_IP;
- break;
-
- case ETH_P_IPX: /* SNAP encapsulation */
- case ETH_P_ARP:
- hdr_len += 7;
- skb_push(skb, 7);
- skb->data[0] = 0;
- skb->data[1] = NLPID_SNAP;
- skb_copy_to_linear_data_offset(skb, 2, wanrouter_oui_ether,
- sizeof(wanrouter_oui_ether));
- *((unsigned short*)&skb->data[5]) = htons(type);
- break;
-
- default: /* Unknown packet type */
- printk(KERN_INFO
- "%s: unsupported Ethertype 0x%04X on interface %s!\n",
- wanrouter_modname, type, dev->name);
- hdr_len = -EINVAL;
- }
- return hdr_len;
-}
-
-
-/*
- * Decapsulate packet.
- *
- * Return: Ethertype (in network order)
- * 0 unknown encapsulation
- *
- * Notes:
- * 1. This function may be called on interrupt context.
- */
-
-
-__be16 wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev)
-{
- int cnt = skb->data[0] ? 0 : 1; /* there may be a pad present */
- __be16 ethertype;
-
- switch (skb->data[cnt]) {
- case NLPID_IP: /* IP datagramm */
- ethertype = htons(ETH_P_IP);
- cnt += 1;
- break;
-
- case NLPID_SNAP: /* SNAP encapsulation */
- if (memcmp(&skb->data[cnt + 1], wanrouter_oui_ether,
- sizeof(wanrouter_oui_ether))){
- printk(KERN_INFO
- "%s: unsupported SNAP OUI %02X-%02X-%02X "
- "on interface %s!\n", wanrouter_modname,
- skb->data[cnt+1], skb->data[cnt+2],
- skb->data[cnt+3], dev->name);
- return 0;
- }
- ethertype = *((__be16*)&skb->data[cnt+4]);
- cnt += 6;
- break;
-
- /* add other protocols, e.g. CLNP, ESIS, ISIS, if needed */
-
- default:
- printk(KERN_INFO
- "%s: unsupported NLPID 0x%02X on interface %s!\n",
- wanrouter_modname, skb->data[cnt], dev->name);
- return 0;
- }
- skb->protocol = ethertype;
- skb->pkt_type = PACKET_HOST; /* Physically point to point */
- skb_pull(skb, cnt);
- skb_reset_mac_header(skb);
- return ethertype;
-}
-
-#endif /* 0 */
-
-/*
- * WAN device IOCTL.
- * o find WAN device associated with this node
- * o execute requested action or pass command to the device driver
- */
-
-long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct inode *inode = file->f_path.dentry->d_inode;
- int err = 0;
- struct proc_dir_entry *dent;
- struct wan_device *wandev;
- void __user *data = (void __user *)arg;
-
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if ((cmd >> 8) != ROUTER_IOCTL)
- return -EINVAL;
-
- dent = PDE(inode);
- if ((dent == NULL) || (dent->data == NULL))
- return -EINVAL;
-
- wandev = dent->data;
- if (wandev->magic != ROUTER_MAGIC)
- return -EINVAL;
-
- mutex_lock(&wanrouter_mutex);
- switch (cmd) {
- case ROUTER_SETUP:
- err = wanrouter_device_setup(wandev, data);
- break;
-
- case ROUTER_DOWN:
- err = wanrouter_device_shutdown(wandev);
- break;
-
- case ROUTER_STAT:
- err = wanrouter_device_stat(wandev, data);
- break;
-
- case ROUTER_IFNEW:
- err = wanrouter_device_new_if(wandev, data);
- break;
-
- case ROUTER_IFDEL:
- err = wanrouter_device_del_if(wandev, data);
- break;
-
- case ROUTER_IFSTAT:
- break;
-
- default:
- if ((cmd >= ROUTER_USER) &&
- (cmd <= ROUTER_USER_MAX) &&
- wandev->ioctl)
- err = wandev->ioctl(wandev, cmd, arg);
- else err = -EINVAL;
- }
- mutex_unlock(&wanrouter_mutex);
- return err;
-}
-
-/*
- * WAN Driver IOCTL Handlers
- */
-
-/*
- * Setup WAN link device.
- * o verify user address space
- * o allocate kernel memory and copy configuration data to kernel space
- * o if configuration data includes extension, copy it to kernel space too
- * o call driver's setup() entry point
- */
-
-static int wanrouter_device_setup(struct wan_device *wandev,
- wandev_conf_t __user *u_conf)
-{
- void *data = NULL;
- wandev_conf_t *conf;
- int err = -EINVAL;
-
- if (wandev->setup == NULL) { /* Nothing to do ? */
- printk(KERN_INFO "%s: ERROR, No setup script: wandev->setup()\n",
- wandev->name);
- return 0;
- }
-
- conf = kmalloc(sizeof(wandev_conf_t), GFP_KERNEL);
- if (conf == NULL){
- printk(KERN_INFO "%s: ERROR, Failed to allocate kernel memory !\n",
- wandev->name);
- return -ENOBUFS;
- }
-
- if (copy_from_user(conf, u_conf, sizeof(wandev_conf_t))) {
- printk(KERN_INFO "%s: Failed to copy user config data to kernel space!\n",
- wandev->name);
- kfree(conf);
- return -EFAULT;
- }
-
- if (conf->magic != ROUTER_MAGIC) {
- kfree(conf);
- printk(KERN_INFO "%s: ERROR, Invalid MAGIC Number\n",
- wandev->name);
- return -EINVAL;
- }
-
- if (conf->data_size && conf->data) {
- if (conf->data_size > 128000) {
- printk(KERN_INFO
- "%s: ERROR, Invalid firmware data size %i !\n",
- wandev->name, conf->data_size);
- kfree(conf);
- return -EINVAL;
- }
-
- data = vmalloc(conf->data_size);
- if (!data) {
- printk(KERN_INFO
- "%s: ERROR, Failed allocate kernel memory !\n",
- wandev->name);
- kfree(conf);
- return -ENOBUFS;
- }
- if (!copy_from_user(data, conf->data, conf->data_size)) {
- conf->data = data;
- err = wandev->setup(wandev, conf);
- } else {
- printk(KERN_INFO
- "%s: ERROR, Failed to copy from user data !\n",
- wandev->name);
- err = -EFAULT;
- }
- vfree(data);
- } else {
- printk(KERN_INFO
- "%s: ERROR, No firmware found ! Firmware size = %i !\n",
- wandev->name, conf->data_size);
- }
-
- kfree(conf);
- return err;
-}
-
-/*
- * Shutdown WAN device.
- * o delete all not opened logical channels for this device
- * o call driver's shutdown() entry point
- */
-
-static int wanrouter_device_shutdown(struct wan_device *wandev)
-{
- struct net_device *dev;
- int err=0;
-
- if (wandev->state == WAN_UNCONFIGURED)
- return 0;
-
- printk(KERN_INFO "\n%s: Shutting Down!\n",wandev->name);
-
- for (dev = wandev->dev; dev;) {
- err = wanrouter_delete_interface(wandev, dev->name);
- if (err)
- return err;
- /* The above function deallocates the current dev
- * structure. Therefore, we cannot use netdev_priv(dev)
- * as the next element: wandev->dev points to the
- * next element */
- dev = wandev->dev;
- }
-
- if (wandev->ndev)
- return -EBUSY; /* there are opened interfaces */
-
- if (wandev->shutdown)
- err=wandev->shutdown(wandev);
-
- return err;
-}
-
-/*
- * Get WAN device status & statistics.
- */
-
-static int wanrouter_device_stat(struct wan_device *wandev,
- wandev_stat_t __user *u_stat)
-{
- wandev_stat_t stat;
-
- memset(&stat, 0, sizeof(stat));
-
- /* Ask device driver to update device statistics */
- if ((wandev->state != WAN_UNCONFIGURED) && wandev->update)
- wandev->update(wandev);
-
- /* Fill out structure */
- stat.ndev = wandev->ndev;
- stat.state = wandev->state;
-
- if (copy_to_user(u_stat, &stat, sizeof(stat)))
- return -EFAULT;
-
- return 0;
-}
-
-/*
- * Create new WAN interface.
- * o verify user address space
- * o copy configuration data to kernel address space
- * o allocate network interface data space
- * o call driver's new_if() entry point
- * o make sure there is no interface name conflict
- * o register network interface
- */
-
-static int wanrouter_device_new_if(struct wan_device *wandev,
- wanif_conf_t __user *u_conf)
-{
- wanif_conf_t *cnf;
- struct net_device *dev = NULL;
- int err;
-
- if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL))
- return -ENODEV;
-
- cnf = kmalloc(sizeof(wanif_conf_t), GFP_KERNEL);
- if (!cnf)
- return -ENOBUFS;
-
- err = -EFAULT;
- if (copy_from_user(cnf, u_conf, sizeof(wanif_conf_t)))
- goto out;
-
- err = -EINVAL;
- if (cnf->magic != ROUTER_MAGIC)
- goto out;
-
- if (cnf->config_id == WANCONFIG_MPPP) {
- printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n",
- wandev->name);
- err = -EPROTONOSUPPORT;
- goto out;
- } else {
- err = wandev->new_if(wandev, dev, cnf);
- }
-
- if (!err) {
- /* Register network interface. This will invoke init()
- * function supplied by the driver. If device registered
- * successfully, add it to the interface list.
- */
-
-#ifdef WANDEBUG
- printk(KERN_INFO "%s: registering interface %s...\n",
- wanrouter_modname, dev->name);
-#endif
-
- err = register_netdev(dev);
- if (!err) {
- struct net_device *slave = NULL;
- unsigned long smp_flags=0;
-
- lock_adapter_irq(&wandev->lock, &smp_flags);
-
- if (wandev->dev == NULL) {
- wandev->dev = dev;
- } else {
- for (slave=wandev->dev;
- DEV_TO_SLAVE(slave);
- slave = DEV_TO_SLAVE(slave))
- DEV_TO_SLAVE(slave) = dev;
- }
- ++wandev->ndev;
-
- unlock_adapter_irq(&wandev->lock, &smp_flags);
- err = 0; /* done !!! */
- goto out;
- }
- if (wandev->del_if)
- wandev->del_if(wandev, dev);
- free_netdev(dev);
- }
-
-out:
- kfree(cnf);
- return err;
-}
-
-
-/*
- * Delete WAN logical channel.
- * o verify user address space
- * o copy configuration data to kernel address space
- */
-
-static int wanrouter_device_del_if(struct wan_device *wandev, char __user *u_name)
-{
- char name[WAN_IFNAME_SZ + 1];
- int err = 0;
-
- if (wandev->state == WAN_UNCONFIGURED)
- return -ENODEV;
-
- memset(name, 0, sizeof(name));
-
- if (copy_from_user(name, u_name, WAN_IFNAME_SZ))
- return -EFAULT;
-
- err = wanrouter_delete_interface(wandev, name);
- if (err)
- return err;
-
- /* If last interface being deleted, shutdown card
- * This helps with administration at leaf nodes
- * (You can tell if the person at the other end of the phone
- * has an interface configured) and avoids DoS vulnerabilities
- * in binary driver files - this fixes a problem with the current
- * Sangoma driver going into strange states when all the network
- * interfaces are deleted and the link irrecoverably disconnected.
- */
-
- if (!wandev->ndev && wandev->shutdown)
- err = wandev->shutdown(wandev);
-
- return err;
-}
-
-/*
- * Miscellaneous Functions
- */
-
-/*
- * Find WAN device by name.
- * Return pointer to the WAN device data space or NULL if device not found.
- */
-
-static struct wan_device *wanrouter_find_device(char *name)
-{
- struct wan_device *wandev;
-
- for (wandev = wanrouter_router_devlist;
- wandev && strcmp(wandev->name, name);
- wandev = wandev->next);
- return wandev;
-}
-
-/*
- * Delete WAN logical channel identified by its name.
- * o find logical channel by its name
- * o call driver's del_if() entry point
- * o unregister network interface
- * o unlink channel data space from linked list of channels
- * o release channel data space
- *
- * Return: 0 success
- * -ENODEV channel not found.
- * -EBUSY interface is open
- *
- * Note: If (force != 0), then device will be destroyed even if interface
- * associated with it is open. It's caller's responsibility to make
- * sure that opened interfaces are not removed!
- */
-
-static int wanrouter_delete_interface(struct wan_device *wandev, char *name)
-{
- struct net_device *dev = NULL, *prev = NULL;
- unsigned long smp_flags=0;
-
- lock_adapter_irq(&wandev->lock, &smp_flags);
- dev = wandev->dev;
- prev = NULL;
- while (dev && strcmp(name, dev->name)) {
- struct net_device **slave = netdev_priv(dev);
- prev = dev;
- dev = *slave;
- }
- unlock_adapter_irq(&wandev->lock, &smp_flags);
-
- if (dev == NULL)
- return -ENODEV; /* interface not found */
-
- if (netif_running(dev))
- return -EBUSY; /* interface in use */
-
- if (wandev->del_if)
- wandev->del_if(wandev, dev);
-
- lock_adapter_irq(&wandev->lock, &smp_flags);
- if (prev) {
- struct net_device **prev_slave = netdev_priv(prev);
- struct net_device **slave = netdev_priv(dev);
-
- *prev_slave = *slave;
- } else {
- struct net_device **slave = netdev_priv(dev);
- wandev->dev = *slave;
- }
- --wandev->ndev;
- unlock_adapter_irq(&wandev->lock, &smp_flags);
-
- printk(KERN_INFO "%s: unregistering '%s'\n", wandev->name, dev->name);
-
- unregister_netdev(dev);
-
- free_netdev(dev);
-
- return 0;
-}
-
-static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags)
- __acquires(lock)
-{
- spin_lock_irqsave(lock, *smp_flags);
-}
-
-
-static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags)
- __releases(lock)
-{
- spin_unlock_irqrestore(lock, *smp_flags);
-}
-
-EXPORT_SYMBOL(register_wan_device);
-EXPORT_SYMBOL(unregister_wan_device);
-
-MODULE_LICENSE("GPL");
-
-/*
- * End
- */
diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c
deleted file mode 100644
index c43612ee96bb..000000000000
--- a/net/wanrouter/wanproc.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*****************************************************************************
-* wanproc.c WAN Router Module. /proc filesystem interface.
-*
-* This module is completely hardware-independent and provides
-* access to the router using Linux /proc filesystem.
-*
-* Author: Gideon Hack
-*
-* Copyright: (c) 1995-1999 Sangoma Technologies Inc.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* Jun 02, 1999 Gideon Hack Updates for Linux 2.2.X kernels.
-* Jun 29, 1997 Alan Cox Merged with 1.0.3 vendor code
-* Jan 29, 1997 Gene Kozin v1.0.1. Implemented /proc read routines
-* Jan 30, 1997 Alan Cox Hacked around for 2.1
-* Dec 13, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE)
-*****************************************************************************/
-
-#include <linux/init.h> /* __initfunc et al. */
-#include <linux/stddef.h> /* offsetof(), etc. */
-#include <linux/errno.h> /* return codes */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/wanrouter.h> /* WAN router API definitions */
-#include <linux/seq_file.h>
-#include <linux/mutex.h>
-
-#include <net/net_namespace.h>
-#include <asm/io.h>
-
-#define PROC_STATS_FORMAT "%30s: %12lu\n"
-
-/****** Defines and Macros **************************************************/
-
-#define PROT_DECODE(prot) ((prot == WANCONFIG_FR) ? " FR" :\
- (prot == WANCONFIG_X25) ? " X25" : \
- (prot == WANCONFIG_PPP) ? " PPP" : \
- (prot == WANCONFIG_CHDLC) ? " CHDLC": \
- (prot == WANCONFIG_MPPP) ? " MPPP" : \
- " Unknown" )
-
-/****** Function Prototypes *************************************************/
-
-#ifdef CONFIG_PROC_FS
-
-/* Miscellaneous */
-
-/*
- * Structures for interfacing with the /proc filesystem.
- * Router creates its own directory /proc/net/router with the following
- * entries:
- * config device configuration
- * status global device statistics
- * <device> entry for each WAN device
- */
-
-/*
- * Generic /proc/net/router/<file> file and inode operations
- */
-
-/*
- * /proc/net/router
- */
-
-static DEFINE_MUTEX(config_mutex);
-static struct proc_dir_entry *proc_router;
-
-/* Strings */
-
-/*
- * Interface functions
- */
-
-/****** Proc filesystem entry points ****************************************/
-
-/*
- * Iterator
- */
-static void *r_start(struct seq_file *m, loff_t *pos)
-{
- struct wan_device *wandev;
- loff_t l = *pos;
-
- mutex_lock(&config_mutex);
- if (!l--)
- return SEQ_START_TOKEN;
- for (wandev = wanrouter_router_devlist; l-- && wandev;
- wandev = wandev->next)
- ;
- return wandev;
-}
-
-static void *r_next(struct seq_file *m, void *v, loff_t *pos)
-{
- struct wan_device *wandev = v;
- (*pos)++;
- return (v == SEQ_START_TOKEN) ? wanrouter_router_devlist : wandev->next;
-}
-
-static void r_stop(struct seq_file *m, void *v)
-{
- mutex_unlock(&config_mutex);
-}
-
-static int config_show(struct seq_file *m, void *v)
-{
- struct wan_device *p = v;
- if (v == SEQ_START_TOKEN) {
- seq_puts(m, "Device name | port |IRQ|DMA| mem.addr |"
- "mem.size|option1|option2|option3|option4\n");
- return 0;
- }
- if (!p->state)
- return 0;
- seq_printf(m, "%-15s|0x%-4X|%3u|%3u| 0x%-8lX |0x%-6X|%7u|%7u|%7u|%7u\n",
- p->name, p->ioport, p->irq, p->dma, p->maddr, p->msize,
- p->hw_opt[0], p->hw_opt[1], p->hw_opt[2], p->hw_opt[3]);
- return 0;
-}
-
-static int status_show(struct seq_file *m, void *v)
-{
- struct wan_device *p = v;
- if (v == SEQ_START_TOKEN) {
- seq_puts(m, "Device name |protocol|station|interface|"
- "clocking|baud rate| MTU |ndev|link state\n");
- return 0;
- }
- if (!p->state)
- return 0;
- seq_printf(m, "%-15s|%-8s| %-7s| %-9s|%-8s|%9u|%5u|%3u |",
- p->name,
- PROT_DECODE(p->config_id),
- p->config_id == WANCONFIG_FR ?
- (p->station ? "Node" : "CPE") :
- (p->config_id == WANCONFIG_X25 ?
- (p->station ? "DCE" : "DTE") :
- ("N/A")),
- p->interface ? "V.35" : "RS-232",
- p->clocking ? "internal" : "external",
- p->bps,
- p->mtu,
- p->ndev);
-
- switch (p->state) {
- case WAN_UNCONFIGURED:
- seq_printf(m, "%-12s\n", "unconfigured");
- break;
- case WAN_DISCONNECTED:
- seq_printf(m, "%-12s\n", "disconnected");
- break;
- case WAN_CONNECTING:
- seq_printf(m, "%-12s\n", "connecting");
- break;
- case WAN_CONNECTED:
- seq_printf(m, "%-12s\n", "connected");
- break;
- default:
- seq_printf(m, "%-12s\n", "invalid");
- break;
- }
- return 0;
-}
-
-static const struct seq_operations config_op = {
- .start = r_start,
- .next = r_next,
- .stop = r_stop,
- .show = config_show,
-};
-
-static const struct seq_operations status_op = {
- .start = r_start,
- .next = r_next,
- .stop = r_stop,
- .show = status_show,
-};
-
-static int config_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &config_op);
-}
-
-static int status_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &status_op);
-}
-
-static const struct file_operations config_fops = {
- .owner = THIS_MODULE,
- .open = config_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-static const struct file_operations status_fops = {
- .owner = THIS_MODULE,
- .open = status_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-static int wandev_show(struct seq_file *m, void *v)
-{
- struct wan_device *wandev = m->private;
-
- if (wandev->magic != ROUTER_MAGIC)
- return 0;
-
- if (!wandev->state) {
- seq_puts(m, "device is not configured!\n");
- return 0;
- }
-
- /* Update device statistics */
- if (wandev->update) {
- int err = wandev->update(wandev);
- if (err == -EAGAIN) {
- seq_puts(m, "Device is busy!\n");
- return 0;
- }
- if (err) {
- seq_puts(m, "Device is not configured!\n");
- return 0;
- }
- }
-
- seq_printf(m, PROC_STATS_FORMAT,
- "total packets received", wandev->stats.rx_packets);
- seq_printf(m, PROC_STATS_FORMAT,
- "total packets transmitted", wandev->stats.tx_packets);
- seq_printf(m, PROC_STATS_FORMAT,
- "total bytes received", wandev->stats.rx_bytes);
- seq_printf(m, PROC_STATS_FORMAT,
- "total bytes transmitted", wandev->stats.tx_bytes);
- seq_printf(m, PROC_STATS_FORMAT,
- "bad packets received", wandev->stats.rx_errors);
- seq_printf(m, PROC_STATS_FORMAT,
- "packet transmit problems", wandev->stats.tx_errors);
- seq_printf(m, PROC_STATS_FORMAT,
- "received frames dropped", wandev->stats.rx_dropped);
- seq_printf(m, PROC_STATS_FORMAT,
- "transmit frames dropped", wandev->stats.tx_dropped);
- seq_printf(m, PROC_STATS_FORMAT,
- "multicast packets received", wandev->stats.multicast);
- seq_printf(m, PROC_STATS_FORMAT,
- "transmit collisions", wandev->stats.collisions);
- seq_printf(m, PROC_STATS_FORMAT,
- "receive length errors", wandev->stats.rx_length_errors);
- seq_printf(m, PROC_STATS_FORMAT,
- "receiver overrun errors", wandev->stats.rx_over_errors);
- seq_printf(m, PROC_STATS_FORMAT,
- "CRC errors", wandev->stats.rx_crc_errors);
- seq_printf(m, PROC_STATS_FORMAT,
- "frame format errors (aborts)", wandev->stats.rx_frame_errors);
- seq_printf(m, PROC_STATS_FORMAT,
- "receiver fifo overrun", wandev->stats.rx_fifo_errors);
- seq_printf(m, PROC_STATS_FORMAT,
- "receiver missed packet", wandev->stats.rx_missed_errors);
- seq_printf(m, PROC_STATS_FORMAT,
- "aborted frames transmitted", wandev->stats.tx_aborted_errors);
- return 0;
-}
-
-static int wandev_open(struct inode *inode, struct file *file)
-{
- return single_open(file, wandev_show, PDE(inode)->data);
-}
-
-static const struct file_operations wandev_fops = {
- .owner = THIS_MODULE,
- .open = wandev_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .unlocked_ioctl = wanrouter_ioctl,
-};
-
-/*
- * Initialize router proc interface.
- */
-
-int __init wanrouter_proc_init(void)
-{
- struct proc_dir_entry *p;
- proc_router = proc_mkdir(ROUTER_NAME, init_net.proc_net);
- if (!proc_router)
- goto fail;
-
- p = proc_create("config", S_IRUGO, proc_router, &config_fops);
- if (!p)
- goto fail_config;
- p = proc_create("status", S_IRUGO, proc_router, &status_fops);
- if (!p)
- goto fail_stat;
- return 0;
-fail_stat:
- remove_proc_entry("config", proc_router);
-fail_config:
- remove_proc_entry(ROUTER_NAME, init_net.proc_net);
-fail:
- return -ENOMEM;
-}
-
-/*
- * Clean up router proc interface.
- */
-
-void wanrouter_proc_cleanup(void)
-{
- remove_proc_entry("config", proc_router);
- remove_proc_entry("status", proc_router);
- remove_proc_entry(ROUTER_NAME, init_net.proc_net);
-}
-
-/*
- * Add directory entry for WAN device.
- */
-
-int wanrouter_proc_add(struct wan_device* wandev)
-{
- if (wandev->magic != ROUTER_MAGIC)
- return -EINVAL;
-
- wandev->dent = proc_create(wandev->name, S_IRUGO,
- proc_router, &wandev_fops);
- if (!wandev->dent)
- return -ENOMEM;
- wandev->dent->data = wandev;
- return 0;
-}
-
-/*
- * Delete directory entry for WAN device.
- */
-int wanrouter_proc_delete(struct wan_device* wandev)
-{
- if (wandev->magic != ROUTER_MAGIC)
- return -EINVAL;
- remove_proc_entry(wandev->name, proc_router);
- return 0;
-}
-
-#else
-
-/*
- * No /proc - output stubs
- */
-
-int __init wanrouter_proc_init(void)
-{
- return 0;
-}
-
-void wanrouter_proc_cleanup(void)
-{
-}
-
-int wanrouter_proc_add(struct wan_device *wandev)
-{
- return 0;
-}
-
-int wanrouter_proc_delete(struct wan_device *wandev)
-{
- return 0;
-}
-
-#endif
-
-/*
- * End
- */
-