diff options
-rw-r--r-- | drivers/nvmem/imx-ocotp.c | 68 |
1 files changed, 64 insertions, 4 deletions
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c index d94ed2d69a10..bf95a0ecd0dc 100644 --- a/drivers/nvmem/imx-ocotp.c +++ b/drivers/nvmem/imx-ocotp.c @@ -40,7 +40,10 @@ #define IMX_OCOTP_ADDR_CTRL_SET 0x0004 #define IMX_OCOTP_ADDR_CTRL_CLR 0x0008 #define IMX_OCOTP_ADDR_TIMING 0x0010 -#define IMX_OCOTP_ADDR_DATA 0x0020 +#define IMX_OCOTP_ADDR_DATA0 0x0020 +#define IMX_OCOTP_ADDR_DATA1 0x0030 +#define IMX_OCOTP_ADDR_DATA2 0x0040 +#define IMX_OCOTP_ADDR_DATA3 0x0050 #define IMX_OCOTP_BM_CTRL_ADDR 0x0000007F #define IMX_OCOTP_BM_CTRL_BUSY 0x00000100 @@ -55,6 +58,7 @@ static DEFINE_MUTEX(ocotp_mutex); struct ocotp_params { unsigned int nregs; + unsigned int bank_address_words; }; struct ocotp_priv { @@ -176,6 +180,7 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val, u32 timing = 0; u32 ctrl; u8 waddr; + u8 word = 0; /* allow only writing one complete OTP word at a time */ if ((bytes != priv->config->word_size) || @@ -228,8 +233,23 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val, * description. Both the unlock code and address can be written in the * same operation. */ - /* OTP write/read address specifies one of 128 word address locations */ - waddr = offset / 4; + if (priv->params->bank_address_words != 0) { + /* + * In banked/i.MX7 mode the OTP register bank goes into waddr + * see i.MX 7Solo Applications Processor Reference Manual, Rev. + * 0.1 section 6.4.3.1 + */ + offset = offset / priv->config->word_size; + waddr = offset / priv->params->bank_address_words; + word = offset & (priv->params->bank_address_words - 1); + } else { + /* + * Non-banked i.MX6 mode. + * OTP write/read address specifies one of 128 word address + * locations + */ + waddr = offset / 4; + } ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL); ctrl &= ~IMX_OCOTP_BM_CTRL_ADDR; @@ -255,8 +275,43 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val, * shift right (with zero fill). This shifting is required to program * the OTP serially. During the write operation, HW_OCOTP_DATA cannot be * modified. + * Note: on i.MX7 there are four data fields to write for banked write + * with the fuse blowing operation only taking place after data0 + * has been written. This is why data0 must always be the last + * register written. */ - writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA); + if (priv->params->bank_address_words != 0) { + /* Banked/i.MX7 mode */ + switch (word) { + case 0: + writel(0, priv->base + IMX_OCOTP_ADDR_DATA1); + writel(0, priv->base + IMX_OCOTP_ADDR_DATA2); + writel(0, priv->base + IMX_OCOTP_ADDR_DATA3); + writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0); + break; + case 1: + writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA1); + writel(0, priv->base + IMX_OCOTP_ADDR_DATA2); + writel(0, priv->base + IMX_OCOTP_ADDR_DATA3); + writel(0, priv->base + IMX_OCOTP_ADDR_DATA0); + break; + case 2: + writel(0, priv->base + IMX_OCOTP_ADDR_DATA1); + writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA2); + writel(0, priv->base + IMX_OCOTP_ADDR_DATA3); + writel(0, priv->base + IMX_OCOTP_ADDR_DATA0); + break; + case 3: + writel(0, priv->base + IMX_OCOTP_ADDR_DATA1); + writel(0, priv->base + IMX_OCOTP_ADDR_DATA2); + writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA3); + writel(0, priv->base + IMX_OCOTP_ADDR_DATA0); + break; + } + } else { + /* Non-banked i.MX6 mode */ + writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0); + } /* 47.4.1.4.5 * Once complete, the controller will clear BUSY. A write request to a @@ -313,22 +368,27 @@ static struct nvmem_config imx_ocotp_nvmem_config = { static const struct ocotp_params imx6q_params = { .nregs = 128, + .bank_address_words = 0, }; static const struct ocotp_params imx6sl_params = { .nregs = 64, + .bank_address_words = 0, }; static const struct ocotp_params imx6sx_params = { .nregs = 128, + .bank_address_words = 0, }; static const struct ocotp_params imx6ul_params = { .nregs = 128, + .bank_address_words = 0, }; static const struct ocotp_params imx7d_params = { .nregs = 64, + .bank_address_words = 4, }; static const struct of_device_id imx_ocotp_dt_ids[] = { |