summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--net/mac80211/Kconfig37
-rw-r--r--net/mac80211/Makefile41
-rw-r--r--net/mac80211/ieee80211.c34
-rw-r--r--net/mac80211/ieee80211_rate.c4
-rw-r--r--net/mac80211/ieee80211_rate.h38
-rw-r--r--net/mac80211/rc80211_pid_algo.c24
-rw-r--r--net/mac80211/rc80211_simple.c21
7 files changed, 134 insertions, 65 deletions
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index cac6cf2e9ac8..09c255002e56 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -13,25 +13,17 @@ config MAC80211
This option enables the hardware independent IEEE 802.11
networking stack.
-config MAC80211_RC_DEFAULT_CHOICE
- bool "Choose default rate control algorithm" if EMBEDDED
- default y
- depends on MAC80211
- ---help---
- This options enables selection of a default rate control
- algorithm to be built into the mac80211 module. Alternate
- rate control algorithms might be built into the mac80211
- module as well.
+menu "Rate control algorithm selection"
+ depends on MAC80211 != n
choice
prompt "Default rate control algorithm"
default MAC80211_RC_DEFAULT_PID
- depends on MAC80211 && MAC80211_RC_DEFAULT_CHOICE
---help---
This option selects the default rate control algorithm
mac80211 will use. Note that this default can still be
overriden through the ieee80211_default_rc_algo module
- parameter.
+ parameter if different algorithms are available.
config MAC80211_RC_DEFAULT_PID
bool "PID controller based rate control algorithm"
@@ -50,19 +42,27 @@ config MAC80211_RC_DEFAULT_SIMPLE
dumb algorithm. You should choose the PID rate control
instead.
+config MAC80211_RC_DEFAULT_NONE
+ bool "No default algorithm"
+ depends on EMBEDDED
+ help
+ Selecting this option will select no default algorithm
+ and allow you to not build any. Do not choose this
+ option unless you know your driver comes with another
+ suitable algorithm.
endchoice
+comment "Selecting 'y' for an algorithm will"
+comment "build the algorithm into mac80211."
+
config MAC80211_RC_DEFAULT
string
- depends on MAC80211
default "pid" if MAC80211_RC_DEFAULT_PID
default "simple" if MAC80211_RC_DEFAULT_SIMPLE
default ""
config MAC80211_RC_PID
- bool "PID controller based rate control algorithm"
- default y
- depends on MAC80211
+ tristate "PID controller based rate control algorithm"
---help---
This option enables a TX rate control algorithm for
mac80211 that uses a PID controller to select the TX
@@ -72,16 +72,15 @@ config MAC80211_RC_PID
different rate control algorithm.
config MAC80211_RC_SIMPLE
- bool "Simple rate control algorithm (DEPRECATED)"
- default n
- depends on MAC80211
+ tristate "Simple rate control algorithm (DEPRECATED)"
---help---
This option enables a very simple, non-responsive TX
rate control algorithm. This algorithm is deprecated
- and will be removed from the kernel in near future.
+ and will be removed from the kernel in the near future.
It has been replaced by the PID algorithm.
Say N unless you know what you are doing.
+endmenu
config MAC80211_LEDS
bool "Enable LED triggers"
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 06aea8009cd4..54f46bc80cfe 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -1,19 +1,15 @@
obj-$(CONFIG_MAC80211) += mac80211.o
-mac80211-objs-$(CONFIG_MAC80211_LEDS) += ieee80211_led.o
-mac80211-objs-$(CONFIG_NET_SCHED) += wme.o
-mac80211-objs-$(CONFIG_MAC80211_RC_SIMPLE) += rc80211_simple.o
-mac80211-objs-$(CONFIG_MAC80211_RC_PID) += rc80211_pid_algo.o
+# objects for PID algorithm
+rc80211_pid-y := rc80211_pid_algo.o
+rc80211_pid-$(CONFIG_MAC80211_DEBUGFS) += rc80211_pid_debugfs.o
-mac80211-debugfs-objs-$(CONFIG_MAC80211_RC_PID) += rc80211_pid_debugfs.o
-mac80211-objs-$(CONFIG_MAC80211_DEBUGFS) += \
- debugfs.o \
- debugfs_sta.o \
- debugfs_netdev.o \
- debugfs_key.o \
- $(mac80211-debugfs-objs-y)
+# build helper for PID algorithm
+rc-pid-y := $(rc80211_pid-y)
+rc-pid-m := rc80211_pid.o
-mac80211-objs := \
+# mac80211 objects
+mac80211-y := \
ieee80211.o \
ieee80211_ioctl.o \
sta_info.o \
@@ -31,5 +27,22 @@ mac80211-objs := \
tx.o \
key.o \
util.o \
- event.o \
- $(mac80211-objs-y)
+ event.o
+
+mac80211-$(CONFIG_MAC80211_LEDS) += ieee80211_led.o
+mac80211-$(CONFIG_NET_SCHED) += wme.o
+mac80211-$(CONFIG_MAC80211_DEBUGFS) += \
+ debugfs.o \
+ debugfs_sta.o \
+ debugfs_netdev.o \
+ debugfs_key.o
+
+
+# Build rate control algorithm(s)
+CFLAGS_rc80211_simple.o += -DRC80211_SIMPLE_COMPILE
+CFLAGS_rc80211_pid_algo.o += -DRC80211_PID_COMPILE
+mac80211-$(CONFIG_MAC80211_RC_SIMPLE) += rc80211_simple.o
+mac80211-$(CONFIG_MAC80211_RC_PID) += $(rc-pid-$(CONFIG_MAC80211_RC_PID))
+
+# Modular rate algorithms are assigned to mac80211-m - make separate modules
+obj-m += $(mac80211-m)
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 2011c726f2b1..8ba69ae676ca 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -1323,23 +1323,19 @@ static int __init ieee80211_init(void)
BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));
-#ifdef CONFIG_MAC80211_RC_SIMPLE
- ret = ieee80211_rate_control_register(&mac80211_rcsimple);
+ ret = rc80211_simple_init();
if (ret)
goto fail;
-#endif
-#ifdef CONFIG_MAC80211_RC_PID
- ret = ieee80211_rate_control_register(&mac80211_rcpid);
+ ret = rc80211_pid_init();
if (ret)
- goto fail;
-#endif
+ goto fail_simple;
ret = ieee80211_wme_register();
if (ret) {
printk(KERN_DEBUG "ieee80211_init: failed to "
"initialize WME (err=%d)\n", ret);
- goto fail;
+ goto fail_pid;
}
ieee80211_debugfs_netdev_init();
@@ -1347,26 +1343,18 @@ static int __init ieee80211_init(void)
return 0;
-fail:
-
-#ifdef CONFIG_MAC80211_RC_SIMPLE
- ieee80211_rate_control_unregister(&mac80211_rcsimple);
-#endif
-#ifdef CONFIG_MAC80211_RC_PID
- ieee80211_rate_control_unregister(&mac80211_rcpid);
-#endif
-
+ fail_pid:
+ rc80211_simple_exit();
+ fail_simple:
+ rc80211_pid_exit();
+ fail:
return ret;
}
static void __exit ieee80211_exit(void)
{
-#ifdef CONFIG_MAC80211_RC_SIMPLE
- ieee80211_rate_control_unregister(&mac80211_rcsimple);
-#endif
-#ifdef CONFIG_MAC80211_RC_PID
- ieee80211_rate_control_unregister(&mac80211_rcpid);
-#endif
+ rc80211_simple_exit();
+ rc80211_pid_exit();
ieee80211_wme_unregister();
ieee80211_debugfs_netdev_exit();
diff --git a/net/mac80211/ieee80211_rate.c b/net/mac80211/ieee80211_rate.c
index 65fc9ad615e9..5676a26a7c75 100644
--- a/net/mac80211/ieee80211_rate.c
+++ b/net/mac80211/ieee80211_rate.c
@@ -115,6 +115,10 @@ ieee80211_rate_control_ops_get(const char *name)
/* try default if specific alg requested but not found */
ops = ieee80211_try_rate_control_ops_get(ieee80211_default_rc_algo);
+ /* try built-in one if specific alg requested but not found */
+ if (!ops && strlen(CONFIG_MAC80211_RC_DEFAULT))
+ ops = ieee80211_try_rate_control_ops_get(CONFIG_MAC80211_RC_DEFAULT);
+
return ops;
}
diff --git a/net/mac80211/ieee80211_rate.h b/net/mac80211/ieee80211_rate.h
index 3eb0696f3757..73f19e8aa51c 100644
--- a/net/mac80211/ieee80211_rate.h
+++ b/net/mac80211/ieee80211_rate.h
@@ -58,12 +58,6 @@ struct rate_control_ref {
struct kref kref;
};
-/* default 'simple' algorithm */
-extern struct rate_control_ops mac80211_rcsimple;
-
-/* 'PID' algorithm */
-extern struct rate_control_ops mac80211_rcpid;
-
int ieee80211_rate_control_register(struct rate_control_ops *ops);
void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
@@ -170,4 +164,36 @@ int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local,
const char *name);
void rate_control_deinitialize(struct ieee80211_local *local);
+
+/* Rate control algorithms */
+#if defined(RC80211_SIMPLE_COMPILE) || \
+ (defined(CONFIG_MAC80211_RC_SIMPLE) && \
+ !defined(CONFIG_MAC80211_RC_SIMPLE_MODULE))
+extern int rc80211_simple_init(void);
+extern void rc80211_simple_exit(void);
+#else
+static inline int rc80211_simple_init(void)
+{
+ return 0;
+}
+static inline void rc80211_simple_exit(void)
+{
+}
+#endif
+
+#if defined(RC80211_PID_COMPILE) || \
+ (defined(CONFIG_MAC80211_RC_PID) && \
+ !defined(CONFIG_MAC80211_RC_PID_MODULE))
+extern int rc80211_pid_init(void);
+extern void rc80211_pid_exit(void);
+#else
+static inline int rc80211_pid_init(void)
+{
+ return 0;
+}
+static inline void rc80211_pid_exit(void)
+{
+}
+#endif
+
#endif /* IEEE80211_RATE_H */
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index da3529017da1..0995bb9cec21 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -12,7 +12,7 @@
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/skbuff.h>
-
+#include <linux/debugfs.h>
#include <net/mac80211.h>
#include "ieee80211_rate.h"
@@ -492,7 +492,7 @@ static void rate_control_pid_free_sta(void *priv, void *priv_sta)
kfree(spinfo);
}
-struct rate_control_ops mac80211_rcpid = {
+static struct rate_control_ops mac80211_rcpid = {
.name = "pid",
.tx_status = rate_control_pid_tx_status,
.get_rate = rate_control_pid_get_rate,
@@ -507,3 +507,23 @@ struct rate_control_ops mac80211_rcpid = {
.remove_sta_debugfs = rate_control_pid_remove_sta_debugfs,
#endif
};
+
+MODULE_DESCRIPTION("PID controller based rate control algorithm");
+MODULE_AUTHOR("Stefano Brivio");
+MODULE_AUTHOR("Mattias Nissler");
+MODULE_LICENSE("GPL");
+
+int __init rc80211_pid_init(void)
+{
+ return ieee80211_rate_control_register(&mac80211_rcpid);
+}
+
+void __exit rc80211_pid_exit(void)
+{
+ ieee80211_rate_control_unregister(&mac80211_rcpid);
+}
+
+#ifdef CONFIG_MAC80211_RC_PID_MODULE
+module_init(rc80211_pid_init);
+module_exit(rc80211_pid_exit);
+#endif
diff --git a/net/mac80211/rc80211_simple.c b/net/mac80211/rc80211_simple.c
index c1c8b76a56af..33de6f967e55 100644
--- a/net/mac80211/rc80211_simple.c
+++ b/net/mac80211/rc80211_simple.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/compiler.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
@@ -349,7 +350,7 @@ static void rate_control_simple_remove_sta_debugfs(void *priv, void *priv_sta)
}
#endif
-struct rate_control_ops mac80211_rcsimple = {
+static struct rate_control_ops mac80211_rcsimple = {
.name = "simple",
.tx_status = rate_control_simple_tx_status,
.get_rate = rate_control_simple_get_rate,
@@ -364,3 +365,21 @@ struct rate_control_ops mac80211_rcsimple = {
.remove_sta_debugfs = rate_control_simple_remove_sta_debugfs,
#endif
};
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Simple rate control algorithm");
+
+int __init rc80211_simple_init(void)
+{
+ return ieee80211_rate_control_register(&mac80211_rcsimple);
+}
+
+void __exit rc80211_simple_exit(void)
+{
+ ieee80211_rate_control_unregister(&mac80211_rcsimple);
+}
+
+#ifdef CONFIG_MAC80211_RC_SIMPLE_MODULE
+module_init(rc80211_simple_init);
+module_exit(rc80211_simple_exit);
+#endif