diff options
| -rw-r--r-- | drivers/block/cciss.c | 515 | ||||
| -rw-r--r-- | drivers/block/cciss.h | 8 |
2 files changed, 333 insertions, 190 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 8bcd6c498c60..3c6a6a21d540 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -155,15 +155,24 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, static int revalidate_allvol(ctlr_info_t *host); static int cciss_revalidate(struct gendisk *disk); -static int deregister_disk(struct gendisk *disk); -static int register_new_disk(ctlr_info_t *h); +static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk); +static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, int clear_all); +static void cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf, + int withirq, unsigned int *total_size, unsigned int *block_size); +static void cciss_geometry_inquiry(int ctlr, int logvol, + int withirq, unsigned int total_size, + unsigned int block_size, InquiryData_struct *inq_buff, + drive_info_struct *drv); static void cciss_getgeometry(int cntl_num); static void start_io( ctlr_info_t *h); static int sendcmd( __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, unsigned int log_unit, __u8 page_code, unsigned char *scsi3addr, int cmd_type); +static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, + unsigned int use_unit_num, unsigned int log_unit, __u8 page_code, + int cmd_type); #ifdef CONFIG_PROC_FS static int cciss_proc_get_info(char *buffer, char **start, off_t offset, @@ -280,7 +289,7 @@ static int cciss_proc_get_info(char *buffer, char **start, off_t offset, for(i=0; i<=h->highest_lun; i++) { drv = &h->drv[i]; - if (drv->block_size == 0) + if (drv->heads == 0) continue; vol_sz = drv->nr_blocks; @@ -471,6 +480,8 @@ static int cciss_open(struct inode *inode, struct file *filep) if (host->busy_initializing) return -EBUSY; + if (host->busy_initializing || drv->busy_configuring) + return -EBUSY; /* * Root is allowed to open raw volume zero even if it's not configured * so array config can still work. Root is also allowed to open any @@ -814,10 +825,10 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, return(0); } case CCISS_DEREGDISK: - return deregister_disk(disk); + return rebuild_lun_table(host, disk); case CCISS_REGNEWD: - return register_new_disk(host); + return rebuild_lun_table(host, NULL); case CCISS_PASSTHRU: { @@ -1161,48 +1172,323 @@ static int revalidate_allvol(ctlr_info_t *host) return 0; } -static int deregister_disk(struct gendisk *disk) +/* This function will check the usage_count of the drive to be updated/added. + * If the usage_count is zero then the drive information will be updated and + * the disk will be re-registered with the kernel. If not then it will be + * left alone for the next reboot. The exception to this is disk 0 which + * will always be left registered with the kernel since it is also the + * controller node. Any changes to disk 0 will show up on the next + * reboot. +*/ +static void cciss_update_drive_info(int ctlr, int drv_index) + { + ctlr_info_t *h = hba[ctlr]; + struct gendisk *disk; + ReadCapdata_struct *size_buff = NULL; + InquiryData_struct *inq_buff = NULL; + unsigned int block_size; + unsigned int total_size; + unsigned long flags = 0; + int ret = 0; + + /* if the disk already exists then deregister it before proceeding*/ + if (h->drv[drv_index].raid_level != -1){ + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + h->drv[drv_index].busy_configuring = 1; + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + ret = deregister_disk(h->gendisk[drv_index], + &h->drv[drv_index], 0); + h->drv[drv_index].busy_configuring = 0; + } + + /* If the disk is in use return */ + if (ret) + return; + + + /* Get information about the disk and modify the driver sturcture */ + size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL); + if (size_buff == NULL) + goto mem_msg; + inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL); + if (inq_buff == NULL) + goto mem_msg; + + cciss_read_capacity(ctlr, drv_index, size_buff, 1, + &total_size, &block_size); + cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size, + inq_buff, &h->drv[drv_index]); + + ++h->num_luns; + disk = h->gendisk[drv_index]; + set_capacity(disk, h->drv[drv_index].nr_blocks); + + + /* if it's the controller it's already added */ + if (drv_index){ + disk->queue = blk_init_queue(do_cciss_request, &h->lock); + + /* Set up queue information */ + disk->queue->backing_dev_info.ra_pages = READ_AHEAD; + blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask); + + /* This is a hardware imposed limit. */ + blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES); + + /* This is a limit in the driver and could be eliminated. */ + blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES); + + blk_queue_max_sectors(disk->queue, 512); + + disk->queue->queuedata = hba[ctlr]; + + blk_queue_hardsect_size(disk->queue, + hba[ctlr]->drv[drv_index].block_size); + + h->drv[drv_index].queue = disk->queue; + add_disk(disk); + } + +freeret: + kfree(size_buff); + kfree(inq_buff); + return; +mem_msg: + printk(KERN_ERR "cciss: out of memory\n"); + goto freeret; +} + +/* This function will find the first index of the controllers drive array + * that has a -1 for the raid_level and will return that index. This is + * where new drives will be added. If the index to be returned is greater + * than the highest_lun index for the controller then highest_lun is set + * to this new index. If there are no available indexes then -1 is returned. +*/ +static int cciss_find_free_drive_index(int ctlr) +{ + int i; + + for (i=0; i < CISS_MAX_LUN; i++){ + if (hba[ctlr]->drv[i].raid_level == -1){ + if (i > hba[ctlr]->highest_lun) + hba[ctlr]->highest_lun = i; + return i; + } + } + return -1; +} + +/* This function will add and remove logical drives from the Logical + * drive array of the controller and maintain persistancy of ordering + * so that mount points are preserved until the next reboot. This allows + * for the removal of logical drives in the middle of the drive array + * without a re-ordering of those drives. + * INPUT + * h = The controller to perform the operations on + * del_disk = The disk to remove if specified. If the value given + * is NULL then no disk is removed. +*/ +static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) { + int ctlr = h->ctlr; + int num_luns; + ReportLunData_struct *ld_buff = NULL; + drive_info_struct *drv = NULL; + int return_code; + int listlength = 0; + int i; + int drv_found; + int drv_index = 0; + __u32 lunid = 0; unsigned long flags; + + /* Set busy_configuring flag for this operation */ + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + if (h->num_luns >= CISS_MAX_LUN){ + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return -EINVAL; + } + + if (h->busy_configuring){ + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return -EBUSY; + } + h->busy_configuring = 1; + + /* if del_disk is NULL then we are being called to add a new disk + * and update the logical drive table. If it is not NULL then + * we will check if the disk is in use or not. + */ + if (del_disk != NULL){ + drv = get_drv(del_disk); + drv->busy_configuring = 1; + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return_code = deregister_disk(del_disk, drv, 1); + drv->busy_configuring = 0; + h->busy_configuring = 0; + return return_code; + } else { + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); + if (ld_buff == NULL) + goto mem_msg; + + return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, + sizeof(ReportLunData_struct), 0, 0, 0, + TYPE_CMD); + + if (return_code == IO_OK){ + listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24; + listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16; + listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8; + listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]); + } else{ /* reading number of logical volumes failed */ + printk(KERN_WARNING "cciss: report logical volume" + " command failed\n"); + listlength = 0; + goto freeret; + } + + num_luns = listlength / 8; /* 8 bytes per entry */ + if (num_luns > CISS_MAX_LUN){ + num_luns = CISS_MAX_LUN; + printk(KERN_WARNING "cciss: more luns configured" + " on controller than can be handled by" + " this driver.\n"); + } + + /* Compare controller drive array to drivers drive array. + * Check for updates in the drive information and any new drives + * on the controller. + */ + for (i=0; i < num_luns; i++){ + int j; + + drv_found = 0; + + lunid = (0xff & + (unsigned int)(ld_buff->LUN[i][3])) << 24; + lunid |= (0xff & + (unsigned int)(ld_buff->LUN[i][2])) << 16; + lunid |= (0xff & + (unsigned int)(ld_buff->LUN[i][1])) << 8; + lunid |= 0xff & + (unsigned int)(ld_buff->LUN[i][0]); + + /* Find if the LUN is already in the drive array + * of the controller. If so then update its info + * if not is use. If it does not exist then find + * the first free index and add it. + */ + for (j=0; j <= h->highest_lun; j++){ + if (h->drv[j].LunID == lunid){ + drv_index = j; + drv_found = 1; + } + } + + /* check if the drive was found already in the array */ + if (!drv_found){ + drv_index = cciss_find_free_drive_index(ctlr); + if (drv_index == -1) + goto freeret; + + } + h->drv[drv_index].LunID = lunid; + cciss_update_drive_info(ctlr, drv_index); + } /* end for */ + } /* end else */ + +freeret: + kfree(ld_buff); + h->busy_configuring = 0; + /* We return -1 here to tell the ACU that we have registered/updated + * all of the drives that we can and to keep it from calling us + * additional times. + */ + return -1; +mem_msg: + printk(KERN_ERR "cciss: out of memory\n"); + goto freeret; +} + +/* This function will deregister the disk and it's queue from the + * kernel. It must be called with the controller lock held and the + * drv structures busy_configuring flag set. It's parameters are: + * + * disk = This is the disk to be deregistered + * drv = This is the drive_info_struct associated with the disk to be + * deregistered. It contains information about the disk used + * by the driver. + * clear_all = This flag determines whether or not the disk information + * is going to be completely cleared out and the highest_lun + * reset. Sometimes we want to clear out information about + * the disk in preperation for re-adding it. In this case + * the highest_lun should be left unchanged and the LunID + * should not be cleared. +*/ +static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, + int clear_all) +{ ctlr_info_t *h = get_host(disk); - drive_info_struct *drv = get_drv(disk); - int ctlr = h->ctlr; if (!capable(CAP_SYS_RAWIO)) return -EPERM; - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); /* make sure logical volume is NOT is use */ - if( drv->usage_count > 1) { - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); + if(clear_all || (h->gendisk[0] == disk)) { + if (drv->usage_count > 1) return -EBUSY; } - drv->usage_count++; - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); + else + if( drv->usage_count > 0 ) + return -EBUSY; - /* invalidate the devices and deregister the disk */ - if (disk->flags & GENHD_FL_UP) + /* invalidate the devices and deregister the disk. If it is disk + * zero do not deregister it but just zero out it's values. This + * allows us to delete disk zero but keep the controller registered. + */ + if (h->gendisk[0] != disk){ + if (disk->flags & GENHD_FL_UP){ + blk_cleanup_queue(disk->queue); del_gendisk(disk); + drv->queue = NULL; + } + } + + --h->num_luns; + /* zero out the disk size info */ + drv->nr_blocks = 0; + drv->block_size = 0; + drv->heads = 0; + drv->sectors = 0; + drv->cylinders = 0; + drv->raid_level = -1; /* This can be used as a flag variable to + * indicate that this element of the drive + * array is free. + */ + + if (clear_all){ /* check to see if it was the last disk */ if (drv == h->drv + h->highest_lun) { /* if so, find the new hightest lun */ int i, newhighest =-1; for(i=0; i<h->highest_lun; i++) { /* if the disk has size > 0, it is available */ - if (h->drv[i].nr_blocks) + if (h->drv[i].heads) newhighest = i; } h->highest_lun = newhighest; - } - --h->num_luns; - /* zero out the disk size info */ - drv->nr_blocks = 0; - drv->block_size = 0; - drv->cylinders = 0; + drv->LunID = 0; + } return(0); } + static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller, @@ -1513,164 +1799,6 @@ cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf, return; } -static int register_new_disk(ctlr_info_t *h) -{ - struct gendisk *disk; - int ctlr = h->ctlr; - int i; - int num_luns; - int logvol; - int new_lun_found = 0; - int new_lun_index = 0; - int free_index_found = 0; - int free_index = 0; - ReportLunData_struct *ld_buff = NULL; - ReadCapdata_struct *size_buff = NULL; - InquiryData_struct *inq_buff = NULL; - int return_code; - int listlength = 0; - __u32 lunid = 0; - unsigned int block_size; - unsigned int total_size; - - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - /* if we have no space in our disk array left to add anything */ - if( h->num_luns >= CISS_MAX_LUN) - return -EINVAL; - - ld_buff = kmalloc(sizeof(ReportLunData_struct), GFP_KERNEL); - if (ld_buff == NULL) - goto mem_msg; - memset(ld_buff, 0, sizeof(ReportLunData_struct)); - size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL); - if (size_buff == NULL) - goto mem_msg; - inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) - goto mem_msg; - - return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, - sizeof(ReportLunData_struct), 0, 0, 0, TYPE_CMD); - - if( return_code == IO_OK) - { - - // printk("LUN Data\n--------------------------\n"); - - listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24; - listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16; - listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8; - listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]); - } else /* reading number of logical volumes failed */ - { - printk(KERN_WARNING "cciss: report logical volume" - " command failed\n"); - listlength = 0; - goto free_err; - } - num_luns = listlength / 8; // 8 bytes pre entry - if (num_luns > CISS_MAX_LUN) - { - num_luns = CISS_MAX_LUN; - } -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "Length = %x %x %x %x = %d\n", ld_buff->LUNListLength[0], - ld_buff->LUNListLength[1], ld_buff->LUNListLength[2], - ld_buff->LUNListLength[3], num_luns); -#endif - for(i=0; i< num_luns; i++) - { - int j; - int lunID_found = 0; - - lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) << 24; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) << 16; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) << 8; - lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); - - /* check to see if this is a new lun */ - for(j=0; j <= h->highest_lun; j++) - { -#ifdef CCISS_DEBUG - printk("Checking %d %x against %x\n", j,h->drv[j].LunID, - lunid); -#endif /* CCISS_DEBUG */ - if (h->drv[j].LunID == lunid) - { - lunID_found = 1; - break; - } - - } - if( lunID_found == 1) - continue; - else - { /* It is the new lun we have been looking for */ -#ifdef CCISS_DEBUG - printk("new lun found at %d\n", i); -#endif /* CCISS_DEBUG */ - new_lun_index = i; - new_lun_found = 1; - break; - } - } - if (!new_lun_found) - { - printk(KERN_WARNING "cciss: New Logical Volume not found\n"); - goto free_err; - } - /* Now find the free index */ - for(i=0; i <CISS_MAX_LUN; i++) - { -#ifdef CCISS_DEBUG - printk("Checking Index %d\n", i); -#endif /* CCISS_DEBUG */ - if(h->drv[i].LunID == 0) - { -#ifdef CCISS_DEBUG - printk("free index found at %d\n", i); -#endif /* CCISS_DEBUG */ - free_index_found = 1; - free_index = i; - break; - } - } - if (!free_index_found) - { - printk(KERN_WARNING "cciss: unable to find free slot for disk\n"); - goto free_err; - } - - logvol = free_index; - h->drv[logvol].LunID = lunid; - /* there could be gaps in lun numbers, track hightest */ - if(h->highest_lun < lunid) - h->highest_lun = logvol; - cciss_read_capacity(ctlr, logvol, size_buff, 1, - &total_size, &block_size); - cciss_geometry_inquiry(ctlr, logvol, 1, total_size, block_size, - inq_buff, &h->drv[logvol]); - h->drv[logvol].usage_count = 0; - ++h->num_luns; - /* setup partitions per disk */ - disk = h->gendisk[logvol]; - set_capacity(disk, h->drv[logvol].nr_blocks); - /* if it's the controller it's already added */ - if(logvol) - add_disk(disk); -freeret: - kfree(ld_buff); - kfree(size_buff); - kfree(inq_buff); - return (logvol); -mem_msg: - printk(KERN_ERR "cciss: out of memory\n"); -free_err: - logvol = -1; - goto freeret; -} - static int cciss_revalidate(struct gendisk *disk) { ctlr_info_t *h = get_host(disk); @@ -2652,12 +2780,16 @@ static void cciss_getgeometry(int cntl_num) #endif /* CCISS_DEBUG */ hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns-1; - for(i=0; i< hba[cntl_num]->num_luns; i++) +// for(i=0; i< hba[cntl_num]->num_luns; i++) + for(i=0; i < CISS_MAX_LUN; i++) { - - lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) << 24; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) << 16; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) << 8; + if (i < hba[cntl_num]->num_luns){ + lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) + << 24; + lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) + << 16; + lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) + << 8; lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); hba[cntl_num]->drv[i].LunID = lunid; @@ -2665,13 +2797,18 @@ static void cciss_getgeometry(int cntl_num) #ifdef CCISS_DEBUG printk(KERN_DEBUG "LUN[%d]: %x %x %x %x = %x\n", i, - ld_buff->LUN[i][0], ld_buff->LUN[i][1],ld_buff->LUN[i][2], - ld_buff->LUN[i][3], hba[cntl_num]->drv[i].LunID); + ld_buff->LUN[i][0], ld_buff->LUN[i][1], + ld_buff->LUN[i][2], ld_buff->LUN[i][3], + hba[cntl_num]->drv[i].LunID); #endif /* CCISS_DEBUG */ cciss_read_capacity(cntl_num, i, size_buff, 0, &total_size, &block_size); - cciss_geometry_inquiry(cntl_num, i, 0, total_size, block_size, - inq_buff, &hba[cntl_num]->drv[i]); + cciss_geometry_inquiry(cntl_num, i, 0, total_size, + block_size, inq_buff, &hba[cntl_num]->drv[i]); + } else { + /* initialize raid_level to indicate a free space */ + hba[cntl_num]->drv[i].raid_level = -1; + } } kfree(ld_buff); kfree(size_buff); diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h index 11ee83504b38..dec27a961120 100644 --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h @@ -35,7 +35,13 @@ typedef struct _drive_info_struct int heads; int sectors; int cylinders; - int raid_level; + int raid_level; /* set to -1 to indicate that + * the drive is not in use/configured + */ + int busy_configuring; /*This is set when the drive is being removed + *to prevent it from being opened or it's queue + *from being started. + */ } drive_info_struct; struct ctlr_info |