summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/mtd/nand/fsmc_nand.c23
-rw-r--r--include/linux/mtd/fsmc.h19
2 files changed, 20 insertions, 22 deletions
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 5af4b3c122f5..205b10b9f9b9 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -31,6 +31,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/mtd/fsmc.h>
+#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
static struct nand_ecclayout fsmc_ecc1_layout = {
@@ -184,8 +185,9 @@ const char *part_probes[] = { "cmdlinepart", NULL };
#endif
/**
- * struct fsmc_nand_data - atructure for FSMC NAND device state
+ * struct fsmc_nand_data - structure for FSMC NAND device state
*
+ * @pid: Part ID on the AMBA PrimeCell format
* @mtd: MTD info for a NAND flash.
* @nand: Chip related info for a NAND flash.
* @partitions: Partition info for a NAND Flash.
@@ -201,6 +203,7 @@ const char *part_probes[] = { "cmdlinepart", NULL };
* @regs_va: FSMC regs base address.
*/
struct fsmc_nand_data {
+ u32 pid;
struct mtd_info mtd;
struct nand_chip nand;
struct mtd_partition *partitions;
@@ -541,6 +544,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
struct fsmc_regs *regs;
struct resource *res;
int ret = 0;
+ u32 pid;
+ int i;
if (!pdata) {
dev_err(&pdev->dev, "platform data is NULL\n");
@@ -630,6 +635,18 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
if (ret)
goto err_probe1;
+ /*
+ * This device ID is actually a common AMBA ID as used on the
+ * AMBA PrimeCell bus. However it is not a PrimeCell.
+ */
+ for (pid = 0, i = 0; i < 4; i++)
+ pid |= (readl(host->regs_va + resource_size(res) - 0x20 + 4 * i) & 255) << (i * 8);
+ host->pid = pid;
+ dev_info(&pdev->dev, "FSMC device partno %03x, manufacturer %02x, "
+ "revision %02x, config %02x\n",
+ AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid),
+ AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid));
+
host->bank = pdata->bank;
host->select_chip = pdata->select_bank;
regs = host->regs_va;
@@ -657,7 +674,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16);
- if (get_fsmc_version(host->regs_va) == FSMC_VER8) {
+ if (AMBA_REV_BITS(host->pid) >= 8) {
nand->ecc.read_page = fsmc_read_page_hwecc;
nand->ecc.calculate = fsmc_read_hwecc_ecc4;
nand->ecc.correct = fsmc_correct_data;
@@ -677,7 +694,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
goto err_probe;
}
- if (get_fsmc_version(host->regs_va) == FSMC_VER8) {
+ if (AMBA_REV_BITS(host->pid) >= 8) {
if (host->mtd.writesize == 512) {
nand->ecc.layout = &fsmc_ecc4_sp_layout;
host->ecc_place = &fsmc_ecc4_sp_place;
diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h
index e210b87e6cd6..96e8e67a053e 100644
--- a/include/linux/mtd/fsmc.h
+++ b/include/linux/mtd/fsmc.h
@@ -115,25 +115,6 @@ struct fsmc_regs {
#define FSMC_THOLD_4 (4 << 16)
#define FSMC_THIZ_1 (1 << 24)
-/* peripid2 register definitions */
-#define FSMC_REVISION_MSK (0xf)
-#define FSMC_REVISION_SHFT (0x4)
-
-#define FSMC_VER1 1
-#define FSMC_VER2 2
-#define FSMC_VER3 3
-#define FSMC_VER4 4
-#define FSMC_VER5 5
-#define FSMC_VER6 6
-#define FSMC_VER7 7
-#define FSMC_VER8 8
-
-static inline uint32_t get_fsmc_version(struct fsmc_regs *regs)
-{
- return (readl(&regs->peripid2) >> FSMC_REVISION_SHFT) &
- FSMC_REVISION_MSK;
-}
-
/*
* There are 13 bytes of ecc for every 512 byte block in FSMC version 8
* and it has to be read consecutively and immediately after the 512