summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt12
-rw-r--r--Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt20
-rw-r--r--Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/coherency-fabric.txt21
-rw-r--r--Documentation/devicetree/bindings/arm/l2cc.txt9
-rw-r--r--Documentation/devicetree/bindings/clock/mvebu-core-clock.txt47
-rw-r--r--Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt119
-rw-r--r--Documentation/devicetree/bindings/dma/mv-xor.txt40
-rw-r--r--Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt23
-rw-r--r--Documentation/devicetree/bindings/net/marvell-orion-mdio.txt35
11 files changed, 345 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
index 70c0dc5f00ed..61df564c0d23 100644
--- a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
@@ -6,9 +6,15 @@ Required properties:
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
The cell is the IRQ number
+
- reg: Should contain PMIC registers location and length. First pair
for the main interrupt registers, second pair for the per-CPU
- interrupt registers
+ interrupt registers. For this last pair, to be compliant with SMP
+ support, the "virtual" must be use (For the record, these registers
+ automatically map to the interrupt controller registers of the
+ current CPU)
+
+
Example:
@@ -18,6 +24,6 @@ Example:
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
- reg = <0xd0020000 0x1000>,
- <0xd0021000 0x1000>;
+ reg = <0xd0020a00 0x1d0>,
+ <0xd0021070 0x58>;
};
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt
new file mode 100644
index 000000000000..926b4d6aae7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt
@@ -0,0 +1,20 @@
+Power Management Service Unit(PMSU)
+-----------------------------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,armada-370-xp-pmsu"
+
+- reg: Should contain PMSU registers location and length. First pair
+ for the per-CPU SW Reset Control registers, second pair for the
+ Power Management Service Unit.
+
+Example:
+
+armada-370-xp-pmsu@d0022000 {
+ compatible = "marvell,armada-370-xp-pmsu";
+ reg = <0xd0022100 0x430>,
+ <0xd0020800 0x20>;
+};
+
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
index 8b6ea2267c94..64830118b013 100644
--- a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible: Should be "marvell,armada-370-xp-timer"
- interrupts: Should contain the list of Global Timer interrupts
- reg: Should contain the base address of the Global Timer registers
+- clocks: clock driving the timer hardware
Optional properties:
- marvell,timer-25Mhz: Tells whether the Global timer supports the 25
diff --git a/Documentation/devicetree/bindings/arm/coherency-fabric.txt b/Documentation/devicetree/bindings/arm/coherency-fabric.txt
new file mode 100644
index 000000000000..17d8cd107559
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/coherency-fabric.txt
@@ -0,0 +1,21 @@
+Coherency fabric
+----------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,coherency-fabric"
+
+- reg: Should contain coherency fabric registers location and
+ length. First pair for the coherency fabric registers, second pair
+ for the per-CPU fabric registers registers.
+
+Example:
+
+coherency-fabric@d0020200 {
+ compatible = "marvell,coherency-fabric";
+ reg = <0xd0020200 0xb0>,
+ <0xd0021810 0x1c>;
+
+};
+
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index 7c3ee3aeb7b7..cbef09b5c8a7 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -10,6 +10,12 @@ Required properties:
"arm,pl310-cache"
"arm,l220-cache"
"arm,l210-cache"
+ "marvell,aurora-system-cache": Marvell Controller designed to be
+ compatible with the ARM one, with system cache mode (meaning
+ maintenance operations on L1 are broadcasted to the L2 and L2
+ performs the same operation).
+ "marvell,"aurora-outer-cache: Marvell Controller designed to be
+ compatible with the ARM one with outer cache mode.
- cache-unified : Specifies the cache is a unified cache.
- cache-level : Should be set to 2 for a level 2 cache.
- reg : Physical base address and size of cache controller's memory mapped
@@ -29,6 +35,9 @@ Optional properties:
filter. Addresses in the filter window are directed to the M1 port. Other
addresses will go to the M0 port.
- interrupts : 1 combined interrupt.
+- cache-id-part: cache id part number to be used if it is not present
+ on hardware
+- wt-override: If present then L2 is forced to Write through mode
Example:
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
new file mode 100644
index 000000000000..1e662948661e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -0,0 +1,47 @@
+* Core Clock bindings for Marvell MVEBU SoCs
+
+Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+reading the Sample-At-Reset (SAR) register. The core clock consumer should
+specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = nbclk (L2 Cache clock)
+ 3 = hclk (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
+ "marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+ "marvell,dove-core-clock" - for Dove SoC core clocks
+ "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
+ "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+- reg : shall be the register address of the Sample-At-Reset (SAR) register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+ output names ("tclk", "cpuclk", "l2clk", "ddrclk")
+
+Example:
+
+core_clk: core-clocks@d0214 {
+ compatible = "marvell,dove-core-clock";
+ reg = <0xd0214 0x4>;
+ #clock-cells = <1>;
+};
+
+spi0: spi@10600 {
+ compatible = "marvell,orion-spi";
+ /* ... */
+ /* get tclk from core clock provider */
+ clocks = <&core_clk 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
new file mode 100644
index 000000000000..feb830130714
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
@@ -0,0 +1,21 @@
+Device Tree Clock bindings for cpu clock of Marvell EBU platforms
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+- reg : Address and length of the clock complex register set
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parent clock phandle for the clock.
+
+cpuclk: clock-complex@d0018700 {
+ #clock-cells = <1>;
+ compatible = "marvell,armada-xp-cpu-clock";
+ reg = <0xd0018700 0xA0>;
+ clocks = <&coreclk 1>;
+}
+
+cpu@0 {
+ compatible = "marvell,sheeva-v7";
+ reg = <0>;
+ clocks = <&cpuclk 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
new file mode 100644
index 000000000000..7337005ef5e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -0,0 +1,119 @@
+* Gated Clock bindings for Marvell Orion SoCs
+
+Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
+some power. The clock consumer should specify the desired clock by having
+the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
+the corresponding clock gating control bit in HW to ease manual clock lookup
+in datasheet.
+
+The following is a list of provided IDs for Armada 370:
+ID Clock Peripheral
+-----------------------------------
+0 Audio AC97 Cntrl
+1 pex0_en PCIe 0 Clock out
+2 pex1_en PCIe 1 Clock out
+3 ge1 Gigabit Ethernet 1
+4 ge0 Gigabit Ethernet 0
+5 pex0 PCIe Cntrl 0
+9 pex1 PCIe Cntrl 1
+15 sata0 SATA Host 0
+17 sdio SDHCI Host
+25 tdm Time Division Mplx
+28 ddr DDR Cntrl
+30 sata1 SATA Host 0
+
+The following is a list of provided IDs for Armada XP:
+ID Clock Peripheral
+-----------------------------------
+0 audio Audio Cntrl
+1 ge3 Gigabit Ethernet 3
+2 ge2 Gigabit Ethernet 2
+3 ge1 Gigabit Ethernet 1
+4 ge0 Gigabit Ethernet 0
+5 pex0 PCIe Cntrl 0
+6 pex1 PCIe Cntrl 1
+7 pex2 PCIe Cntrl 2
+8 pex3 PCIe Cntrl 3
+13 bp
+14 sata0lnk
+15 sata0 SATA Host 0
+16 lcd LCD Cntrl
+17 sdio SDHCI Host
+18 usb0 USB Host 0
+19 usb1 USB Host 1
+20 usb2 USB Host 2
+22 xor0 XOR DMA 0
+23 crypto CESA engine
+25 tdm Time Division Mplx
+28 xor1 XOR DMA 1
+29 sata1lnk
+30 sata1 SATA Host 0
+
+The following is a list of provided IDs for Dove:
+ID Clock Peripheral
+-----------------------------------
+0 usb0 USB Host 0
+1 usb1 USB Host 1
+2 ge Gigabit Ethernet
+3 sata SATA Host
+4 pex0 PCIe Cntrl 0
+5 pex1 PCIe Cntrl 1
+8 sdio0 SDHCI Host 0
+9 sdio1 SDHCI Host 1
+10 nand NAND Cntrl
+11 camera Camera Cntrl
+12 i2s0 I2S Cntrl 0
+13 i2s1 I2S Cntrl 1
+15 crypto CESA engine
+21 ac97 AC97 Cntrl
+22 pdma Peripheral DMA
+23 xor0 XOR DMA 0
+24 xor1 XOR DMA 1
+30 gephy Gigabit Ethernel PHY
+Note: gephy(30) is implemented as a parent clock of ge(2)
+
+The following is a list of provided IDs for Kirkwood:
+ID Clock Peripheral
+-----------------------------------
+0 ge0 Gigabit Ethernet 0
+2 pex0 PCIe Cntrl 0
+3 usb0 USB Host 0
+4 sdio SDIO Cntrl
+5 tsu Transp. Stream Unit
+6 dunit SDRAM Cntrl
+7 runit Runit
+8 xor0 XOR DMA 0
+9 audio I2S Cntrl 0
+14 sata0 SATA Host 0
+15 sata1 SATA Host 1
+16 xor1 XOR DMA 1
+17 crypto CESA engine
+18 pex1 PCIe Cntrl 1
+19 ge1 Gigabit Ethernet 0
+20 tdm Time Division Mplx
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,dove-gating-clock" - for Dove SoC clock gating
+ "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
+- reg : shall be the register address of the Clock Gating Control register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clocks : default parent clock phandle (e.g. tclk)
+
+Example:
+
+gate_clk: clock-gating-control@d0038 {
+ compatible = "marvell,dove-gating-clock";
+ reg = <0xd0038 0x4>;
+ /* default parent clock is tclk */
+ clocks = <&core_clk 0>;
+ #clock-cells = <1>;
+};
+
+sdio0: sdio@92000 {
+ compatible = "marvell,dove-sdhci";
+ /* get clk gate bit 8 (sdio0) */
+ clocks = <&gate_clk 8>;
+};
diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt
new file mode 100644
index 000000000000..7c6cb7fcecd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mv-xor.txt
@@ -0,0 +1,40 @@
+* Marvell XOR engines
+
+Required properties:
+- compatible: Should be "marvell,orion-xor"
+- reg: Should contain registers location and length (two sets)
+ the first set is the low registers, the second set the high
+ registers for the XOR engine.
+- clocks: pointer to the reference clock
+
+The DT node must also contains sub-nodes for each XOR channel that the
+XOR engine has. Those sub-nodes have the following required
+properties:
+- interrupts: interrupt of the XOR channel
+
+And the following optional properties:
+- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
+- dmacap,memset to indicate that the XOR channel is capable of memset operations
+- dmacap,xor to indicate that the XOR channel is capable of xor operations
+
+Example:
+
+xor@d0060900 {
+ compatible = "marvell,orion-xor";
+ reg = <0xd0060900 0x100
+ 0xd0060b00 0x100>;
+ clocks = <&coreclk 0>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <51>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <52>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
new file mode 100644
index 000000000000..859a6fa7569c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -0,0 +1,23 @@
+* Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
+
+Required properties:
+- compatible: should be "marvell,armada-370-neta".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+- phy: A phandle to a phy node defining the PHY address (as the reg
+ property, a single integer).
+- phy-mode: The interface between the SoC and the PHY (a string that
+ of_get_phy_mode() can understand)
+- clocks: a pointer to the reference clock for this device.
+
+Example:
+
+ethernet@d0070000 {
+ compatible = "marvell,armada-370-neta";
+ reg = <0xd0070000 0x2500>;
+ interrupts = <8>;
+ clocks = <&gate_clk 4>;
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
new file mode 100644
index 000000000000..34e7aafa321c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
@@ -0,0 +1,35 @@
+* Marvell MDIO Ethernet Controller interface
+
+The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
+MV78xx0, Armada 370 and Armada XP have an identical unit that provides
+an interface with the MDIO bus. This driver handles this MDIO
+interface.
+
+Required properties:
+- compatible: "marvell,orion-mdio"
+- reg: address and length of the SMI register
+
+The child nodes of the MDIO driver are the individual PHY devices
+connected to this MDIO bus. They must have a "reg" property given the
+PHY address on the MDIO bus.
+
+Example at the SoC level:
+
+mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0xd0072004 0x4>;
+};
+
+And at the board level:
+
+mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+}