summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/pci/designware-pcie.txt17
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt7
-rw-r--r--Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt30
-rw-r--r--Documentation/devicetree/bindings/pci/pci-thunder-pem.txt43
-rw-r--r--Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt68
-rw-r--r--Documentation/devicetree/bindings/pci/xilinx-pcie.txt32
6 files changed, 194 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 5b0853df9d5a..64f2fff12128 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -28,3 +28,20 @@ Optional properties:
- clock-names: Must include the following entries:
- "pcie"
- "pcie_bus"
+
+Example configuration:
+
+ pcie: pcie@0xdffff000 {
+ compatible = "snps,dw-pcie";
+ reg = <0xdffff000 0x1000>, /* Controller registers */
+ <0xd0000000 0x2000>; /* PCI config space */
+ reg-names = "ctrlreg", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
+ 0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+ interrupts = <25>, <24>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index 6fbba53a309b..3be80c68941a 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -13,6 +13,13 @@ Required properties:
- clock-names: Must include the following additional entries:
- "pcie_phy"
+Optional properties:
+- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
+- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
+- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
+
Example:
pcie@0x01000000 {
diff --git a/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt b/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt
new file mode 100644
index 000000000000..f478874b79ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt
@@ -0,0 +1,30 @@
+* ThunderX PCI host controller for pass-1.x silicon
+
+Firmware-initialized PCI host controller to on-chip devices found on
+some Cavium ThunderX processors. These devices have ECAM-based config
+access, but the BARs are all at fixed addresses. We handle the fixed
+addresses by synthesizing Enhanced Allocation (EA) capabilities for
+these devices.
+
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible : Must be "cavium,pci-host-thunder-ecam"
+
+Example:
+
+ pcie@84b000000000 {
+ compatible = "cavium,pci-host-thunder-ecam";
+ device_type = "pci";
+ msi-parent = <&its>;
+ msi-map = <0 &its 0x30000 0x10000>;
+ bus-range = <0 31>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ #stream-id-cells = <1>;
+ reg = <0x84b0 0x00000000 0 0x02000000>; /* Configuration space */
+ ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */
+ };
diff --git a/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt b/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt
new file mode 100644
index 000000000000..f131faea3b7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt
@@ -0,0 +1,43 @@
+* ThunderX PEM PCIe host controller
+
+Firmware-initialized PCI host controller found on some Cavium
+ThunderX processors.
+
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible : Must be "cavium,pci-host-thunder-pem"
+
+- reg : Two entries: First the configuration space for down
+ stream devices base address and size, as accessed
+ from the parent bus. Second, the register bank of
+ the PEM device PCIe bridge.
+
+Example:
+
+ pci@87e0,c2000000 {
+ compatible = "cavium,pci-host-thunder-pem";
+ device_type = "pci";
+ msi-parent = <&its>;
+ msi-map = <0 &its 0x10000 0x10000>;
+ bus-range = <0x8f 0xc7>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+
+ reg = <0x8880 0x8f000000 0x0 0x39000000>, /* Configuration space */
+ <0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
+ ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
+ <0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
+ <0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
+ <0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
+ <0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
+ <0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
+ <0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
+ };
diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
new file mode 100644
index 000000000000..337fc97d18c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
@@ -0,0 +1,68 @@
+* Xilinx NWL PCIe Root Port Bridge DT description
+
+Required properties:
+- compatible: Should contain "xlnx,nwl-pcie-2.11"
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+- reg: Should contain Bridge, PCIe Controller registers location,
+ configuration space, and length
+- reg-names: Must include the following entries:
+ "breg": bridge registers
+ "pcireg": PCIe controller registers
+ "cfg": configuration space region
+- device_type: must be "pci"
+- interrupts: Should contain NWL PCIe interrupt
+- interrupt-names: Must include the following entries:
+ "msi1, msi0": interrupt asserted when MSI is received
+ "intx": interrupt asserted when a legacy interrupt is received
+ "misc": interrupt asserted when miscellaneous is received
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+ mapping of the PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+ supported by hardware)
+ Please refer to the standard PCI bus binding document for a more
+ detailed explanation
+- msi-controller: indicates that this is MSI controller node
+- msi-parent: MSI parent of the root complex itself
+- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
+ - interrupt-controller: identifies the node as an interrupt controller
+ - #interrupt-cells: should be set to 1
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0.
+
+
+Example:
+++++++++
+
+nwl_pcie: pcie@fd0e0000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "xlnx,nwl-pcie-2.11";
+ #interrupt-cells = <1>;
+ msi-controller;
+ device_type = "pci";
+ interrupt-parent = <&gic>;
+ interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
+ interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+
+ msi-parent = <&nwl_pcie>;
+ reg = <0x0 0xfd0e0000 0x0 0x1000>,
+ <0x0 0xfd480000 0x0 0x1000>,
+ <0x0 0xe0000000 0x0 0x1000000>;
+ reg-names = "breg", "pcireg", "cfg";
+ ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
+
+ pcie_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
index 02f979a48aeb..fd57a81180a4 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -17,7 +17,7 @@ Required properties:
Please refer to the standard PCI bus binding document for a more
detailed explanation
-Optional properties:
+Optional properties for Zynq/Microblaze:
- bus-range: PCI bus numbers covered
Interrupt controller child node
@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain.
Example:
++++++++
-
+Zynq:
pci_express: axi-pcie@50000000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "xlnx,axi-pcie-host-1.00.a";
- reg = < 0x50000000 0x10000000 >;
+ reg = < 0x50000000 0x1000000 >;
device_type = "pci";
interrupts = < 0 52 4 >;
interrupt-map-mask = <0 0 0 7>;
@@ -60,3 +60,29 @@ Example:
#interrupt-cells = <1>;
};
};
+
+
+Microblaze:
+ pci_express: axi-pcie@10000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ reg = <0x10000000 0x4000000>;
+ device_type = "pci";
+ interrupt-parent = <&microblaze_0_intc>;
+ interrupts = <1 2>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 1>,
+ <0 0 0 2 &pcie_intc 2>,
+ <0 0 0 3 &pcie_intc 3>,
+ <0 0 0 4 &pcie_intc 4>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
+
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ };