summaryrefslogtreecommitdiff
path: root/Documentation/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/powerpc')
-rw-r--r--Documentation/powerpc/booting-without-of.txt16
1 files changed, 8 insertions, 8 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 3c62e66e1fcc..5c0ba235f5a5 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1136,10 +1136,10 @@ Sense and level information should be encoded as follows:
Devices connected to openPIC-compatible controllers should encode
sense and polarity as follows:
- 0 = high to low edge sensitive type enabled
+ 0 = low to high edge sensitive type enabled
1 = active low level sensitive type enabled
- 2 = low to high edge sensitive type enabled
- 3 = active high level sensitive type enabled
+ 2 = active high level sensitive type enabled
+ 3 = high to low edge sensitive type enabled
ISA PIC interrupt controllers should adhere to the ISA PIC
encodings listed below:
@@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model.
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
- compatible : Should be "gianfar"
- reg : Offset and length of the register set for the device
- - address : List of bytes representing the ethernet address of
+ - mac-address : List of bytes representing the ethernet address of
this controller
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
@@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model.
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
- address = [ 00 E0 0C 00 73 00 ];
+ mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>
@@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node.
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
- address = [ 00 E0 0C 00 73 00 ];
+ mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
@@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node.
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
- address = [ 00 E0 0C 00 73 01 ];
+ mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 3 14 3 18 3>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
@@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node.
model = "FEC";
compatible = "gianfar";
reg = <26000 1000>;
- address = [ 00 E0 0C 00 73 02 ];
+ mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 3>;
interrupt-parent = <40000>;
phy-handle = <2452002>;