summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/serial.c')
-rw-r--r--arch/arm/mach-omap2/serial.c69
1 files changed, 40 insertions, 29 deletions
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b1edf78473b6..302da7403a10 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -40,11 +40,12 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "pm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
+#include "mux.h"
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
@@ -106,21 +107,16 @@ struct omap_uart_state {
static LIST_HEAD(uart_list);
static u8 num_uarts;
-/*
- * Since these idle/enable hooks are used in the idle path itself
- * which has interrupts disabled, use the non-locking versions of
- * the hwmod enable/disable functions.
- */
static int uart_idle_hwmod(struct omap_device *od)
{
- _omap_hwmod_idle(od->hwmods[0]);
+ omap_hwmod_idle(od->hwmods[0]);
return 0;
}
static int uart_enable_hwmod(struct omap_device *od)
{
- _omap_hwmod_enable(od->hwmods[0]);
+ omap_hwmod_enable(od->hwmods[0]);
return 0;
}
@@ -169,9 +165,9 @@ static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
static inline void __init omap_uart_reset(struct omap_uart_state *uart)
{
- serial_write_reg(uart, UART_OMAP_MDR1, 0x07);
+ serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
serial_write_reg(uart, UART_OMAP_SCR, 0x08);
- serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
+ serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
}
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
@@ -219,7 +215,7 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
return;
lcr = serial_read_reg(uart, UART_LCR);
- serial_write_reg(uart, UART_LCR, 0xBF);
+ serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
uart->dll = serial_read_reg(uart, UART_DLL);
uart->dlh = serial_read_reg(uart, UART_DLM);
serial_write_reg(uart, UART_LCR, lcr);
@@ -227,7 +223,7 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC);
uart->scr = serial_read_reg(uart, UART_OMAP_SCR);
uart->wer = serial_read_reg(uart, UART_OMAP_WER);
- serial_write_reg(uart, UART_LCR, 0x80);
+ serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A);
uart->mcr = serial_read_reg(uart, UART_MCR);
serial_write_reg(uart, UART_LCR, lcr);
@@ -247,32 +243,35 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
uart->context_valid = 0;
if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
- omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
+ omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0);
else
- serial_write_reg(uart, UART_OMAP_MDR1, 0x7);
- serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
+
+ serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
efr = serial_read_reg(uart, UART_EFR);
serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(uart, UART_IER, 0x0);
- serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
serial_write_reg(uart, UART_DLL, uart->dll);
serial_write_reg(uart, UART_DLM, uart->dlh);
serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(uart, UART_IER, uart->ier);
- serial_write_reg(uart, UART_LCR, 0x80);
+ serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A);
serial_write_reg(uart, UART_MCR, uart->mcr);
- serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
serial_write_reg(uart, UART_EFR, efr);
serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8);
serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
serial_write_reg(uart, UART_OMAP_WER, uart->wer);
serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
+
if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
- omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
+ omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1);
else
/* UART 16x mode */
- serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
+ serial_write_reg(uart, UART_OMAP_MDR1,
+ UART_OMAP_MDR1_16X_MODE);
}
#else
static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
@@ -492,6 +491,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
u32 wk_mask = 0;
u32 padconf = 0;
+ /* XXX These PRM accesses do not belong here */
uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
switch (uart->num) {
@@ -695,16 +695,16 @@ void __init omap_serial_early_init(void)
/**
* omap_serial_init_port() - initialize single serial port
- * @port: serial port number (0-3)
+ * @bdata: port specific board data pointer
*
- * This function initialies serial driver for given @port only.
+ * This function initialies serial driver for given port only.
* Platforms can call this function instead of omap_serial_init()
* if they don't plan to use all available UARTs as serial ports.
*
* Don't mix calls to omap_serial_init_port() and omap_serial_init(),
* use only one of the two.
*/
-void __init omap_serial_init_port(int port)
+void __init omap_serial_init_port(struct omap_board_data *bdata)
{
struct omap_uart_state *uart;
struct omap_hwmod *oh;
@@ -722,13 +722,15 @@ void __init omap_serial_init_port(int port)
struct omap_uart_port_info omap_up;
#endif
- if (WARN_ON(port < 0))
+ if (WARN_ON(!bdata))
+ return;
+ if (WARN_ON(bdata->id < 0))
return;
- if (WARN_ON(port >= num_uarts))
+ if (WARN_ON(bdata->id >= num_uarts))
return;
list_for_each_entry(uart, &uart_list, node)
- if (port == uart->num)
+ if (bdata->id == uart->num)
break;
oh = uart->oh;
@@ -800,6 +802,8 @@ void __init omap_serial_init_port(int port)
WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
name, oh->name);
+ oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
+
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
@@ -857,7 +861,14 @@ void __init omap_serial_init_port(int port)
void __init omap_serial_init(void)
{
struct omap_uart_state *uart;
+ struct omap_board_data bdata;
- list_for_each_entry(uart, &uart_list, node)
- omap_serial_init_port(uart->num);
+ list_for_each_entry(uart, &uart_list, node) {
+ bdata.id = uart->num;
+ bdata.flags = 0;
+ bdata.pads = NULL;
+ bdata.pads_cnt = 0;
+ omap_serial_init_port(&bdata);
+
+ }
}